INNOVATION - Amazon S3€¦ · SPX Tuck point blade. Manufactured using a unique method to position and bind the diamond grit on the blade, the SPX Tuck point blade provides superior

INNOVATIONSummer 2017

ON!TRACK ASSETMANAGEMENTStay working Stay productive Stay ON!Track

They are some of the biggest efficiency killers: missing assets. Broken tools. Assets that aren’t where they need to be. These problems slow you down—and cost you money. Staying efficient while managing hundreds or thousands of assets across multiple jobsites is an entire job in and of itself. And it’s another job that we want to make easier.

1-800-879-8000 • www.hilti.com 1-800-363-4458 • www.hilti.ca

WITH YOU FROM START TO FINISH — AND BEYONDWhen you’re ready for simplified asset management, we’re ready to help. We’ll help you analyze, plan, and implement ON!Track for your asset inventory, and we’ll be there for you whenever you need assistance with ongoing customer service and training.

Plan:We’ll help you:• Analyze your current process• Perform a cost and benefit analysis• Review requirements

Implement:We’ll help you:• Customize your solution• Tag and register your assets• Conduct initial training

Maintain:We’ll help you:• Stay productive with ongoing customer

service• Get the tools you need with a direct

sales team• Stay up to date with additional training

Description

Sales pack

quantitySPX Solid

item numberSP Solid

item numberSPX Sandwich item number

SP Sandwich item number

Tuck point blade 4.5” 6 pack 2151868 2151869 2151930 2151931

Tuck point blade 5” 6 pack 2151932 2151933 2151934 2151935

APPLICATIONS AND ADVANTAGES

SPX (Sandwich and solid blades) — The Ultimate diamond tuck point blade• Longest lifetime thanks to distinct bond

and diamond grit• Highest cutting speed• Universal use — designed for all mortar

grades and optimized for soft mortar

• Segments available in single (solid) and sandwich versions

SP (Sandwich and solid blades) — Premium diamond tuck point blade• High cutting speed thanks to U-Shaped

segments• Long lifetime and good value• Universal use — designed for all mortar

grades and optimized for hard mortar

• Segments available in single (solid) and sandwich versions

SEGMENT DIMENSIONS:

4.5” Diameter• Solid segment: SPX and SP 1.07” x .25” x .47” (L x W x H) • Sandwich segment: SPX and SP 1.14” x .28” x .39” (L x W x H)

5” Diameter• Solid segment: SPX and SP 1.09” x .25” x .47” (L x W x H) • Sandwich segment: SPX and SP 1.17” x .28”x .39” (L x W x H)

SPX Solid

SPX Sandwich

SP Solid

SP Sandwich

We built on the innovations in our other diamond blade portfolios to create the new family of Hilti SP and SPX Tuck Point blades. Designed for use on all mortar grades and available in solid and sandwich versions for 4.25” and 5” diameters, the SP and SPX offer high cutting speeds, long life in a wide range of applications and excellent value.

While both blades are designed for all mortar grades, the SP Tuck Point Blade is specifically optimized for hard-mortar applications.

When you need a blade optimized for soft-mortar applications, or when extended blade life and maximum cutting speeds are critical, step up to the SPX Tuck point blade. Manufactured using a unique method to position and bind the diamond grit on the blade, the SPX Tuck point blade provides superior performance and durability in most tuck pointing applications.

SP SPX

CUTTING EDGE TUCK POINT BLADES

Tuck point blade SP and SPX

Tool warranty. Some limitations apply. Contact Hilti for details.

we want to hear from you

How do you comply with ever-more stringent dust control regulations when a pressurized water source is hard to come by? You bring the Hilti integrated water pump DSH-P to the job.

Simply fill-up a bucket of water or use another static water source and attach a DSH-P integrated water pump system to your Hilti DSH 600-X, 700-X and 900-X to create a virtually dustless jobsite, wherever the jobsite may be.

EXTRAORDINARY INTEGRATED INNOVATION

Integrated water pump DSH-P


Applications • For use with DSH 600-X, 700-X and

900-X hand-held gas saws• Unparalleled dust control portability for

DSH 600-X/700-X/900-X• Leverages the power of the gas saw

to produce pressurized water for a virtually dustless environment

• 10 ft. hose included

Technical data

Weight 2.8 lbs

Max Suction Lift 5 ft

Max Suction Pressure 87 PSI

Max Hose Length 30 ft: 10 ft hose included

Water Consumption .264 gal/min (dependent on valve)

Accessories

Description Item number

DSH-P + retrofit kit for DSH 700-X 3567534

DSH-P + retrofit kit for DSH 900-X 3567535

Description Package content Item number

DSH-P Water pump DSH-P Water pump, hose and saw connections, 10ft hose 2124505

DSH 600-X Saw + DSH-P + 1 SPX Blade 12” DSH 600-X, DSH-P, SPX 12” Blade 3563750

DSH 700-X Saw + DSH-P + retrofit kit + 1 SPX Blade DSH 700-X, DSH-P, SPX 14” Blade 3563753

DSH 900-X Saw + DSH-P + retrofit kit + 1 SPX Blade 16” DSH 900X, DSH-P, retrofit kit, SPX 16” Blade 3563754

Water pumpDSH-P

Made possible by more than four years of dedicated, non-stop innovation, the Hilti gas-powered DSH 600-X handheld saw builds on the legacies of our popular DSH 700-X and DSH 900-X.

Optimized for concrete, masonry and steel cutting, the DSH 600-X is reliable, easy to start and easy to maintain. The DSH 600-X features a 12” blade yielding nearly a 5” cutting depth with a diamond blade, versatile 180-degree cutting at any height, and innovative blade brake technology that stops the saw blade in under 10 seconds. This game changing gas saw offers superior performance, balance and jobsite safety while weighing in at only 20.8 pounds.

Pair the DSH 600-X with our innovative SPX Equidist 12” blade to experience incredible power and productivity.

EASY TO START, SAFETY, BALANCE

DSH 600-X Hand-held gas saw


Advantages • Easy starting — unique auto choke system• Outcuts other saws — cuts to a depth of 4-15/16” with a

12” diamond blade• Fast blade stop — the blade stops in less than 10 seconds• Pre-tensioned belt, no belt maintenance by the user required• Cyclone filter — for maximum filter lifetime and consistent

high power• Easy maintenance — fast starter rope and filter replacement • Maximum cutting speed thanks to customized Hilti SPX

equidist blade • Reversible arbor flange fits all Hilti and other blades with 1”

and 20 mm arbor size

Applications• Masonry work: Cutting bricks and blocks to size• Metalwork: Cutting steel profiles, pipes and steel sheets• Laying paving: Cutting curbstones and paving slabs to size• Road construction: Perimeter cutting in asphalt and concrete• Floor construction: Cutting expansion joints in fresh concrete• Construction work: Cutting out openings in brick or concrete

walls• Cutting steel/rebar, steel profiles, pipes, and steel sheets

Technical dataCutting depth Up to 4-15/16 in Weight 20.8 lbsBlade size 12 in diameter discsFuel mixture 50:1 (2% oil) with >= 89 Octane fuel

with no more than 10% ethanolRPM 6200 Active vibration reduction YesFor wet and dry operation Yes

Accessories


Pump DSH-P 2124505Consumables kit DSH 600 2137756SPX 12” Diamond blade 2165227SP 12" Diamond blade 216545612” P Diamond blade 216981112” DS-SP Ductile diamond blade 22785312” AC-D General steel UP1 43672312” AC-D Duct. metal cutting blade UP1 43672612” AC-D Metal deck SP1 436714


DSH-600X 2136539DSH 600-X + DSH-P pump + 1 SPX 12” Diamond blade 3563750DSH 600-X + 1 SPX 12” Diamond blade 3563745DSH 600-X + 2 SP 12” Diamond blades 3563746DSH 600-X + 3 P 12” Diamond blades 3563747DSH 600-X + 1 DS-SP Ductile blade 3563748DSH 600-X + 10 AC-D MD Decking discs 3563743DSH 600-X + 10 AC-D UP Steel cutting discs 3563744



Make a clean sweep of dust collection in a variety of jobsite conditions with one of the most recent additions to our expanding selection of universal wet and dry vacuums: the Hilti universal vacuum cleaner VC 125-9 and VC 125-6.

Available in 9 gallon (VC 125-9) and 6 gallon (VC 125-6) capacities to meet your specific site mobility needs, the VC 125 family is ready to take on the toughest jobs with impressive 125 CFM power, Hilti 2 year wear-and-tear coverage (3 years with Hilti Fleet), and an easy manual filter cleaning technology to keep you in the clear.

THE POWERFUL NEW LEADER IN DUST COLLECTION

VC 125-9 and VC 125-6 Universal vacuum cleaners


Applications• Dust extraction from grinding, cutting,

slitting, drilling and dry coring tools• Removal of slurry during wet coring

applications• Cleaning wet and dry

Advantages• 125 CFM level to comply with several

OSHA Table 1 silica dust regulations • Can be paired with a variety of power

tools to reduce dust exposure• 99% filter efficiency• HEPA ready vacuum• Universal, robustly constructed vacuum

cleaner, ideal for use with most Hilti tools.

• Robust wheels and accessories to withstand the harshest jobsite conditions

• Easy handling when emptying the tank and changing filters

• Easy manual filter cleaning button to allow cleaning when it is necessary

Technical data

CFM 125

Capacity 9 and 6 Gal

Hose length 16 ft

Amperage 9 A


VC 125-9 Universal vacuum 2167149

VC 125-6 Universal vacuum 2167148

Accessories


Filter VC 125/150 dry 2121386

Filter VC 125/150 universal wet / dry 2121387

High performance filter VC 125/150 436058

HEPA filter VC 125/150 203879

Universal fleece bag VC 125-6 (5 pk) 2177882

Universal fleece bag VC 125-9 (5 pk) 2177883

Suction hose 36x4m accessory 203867

VC 125-9

VC 125-6


Using Hilti’s powerful AirBoost technology to deliver an impressive 150 CFM of air flow, the Hilti universal vacuum cleaner VC 150-10 X and VC 150-6 X are among the latest additions to Hilti’s line of universal wet and dry vacuums, expanded to meet the growing dust removal needs of industry professionals.

The new VC 150-10 XE and VC 150-6 XE feature a handy 110v/11A power outlet built right into the vacuum — perfect for powering a corded Hilti tool.

Automatic filter cleaning, availability in 10-gallon (VC 150-10 X and VC 150-10 XE) and 6-gallon (VC 150-6 X and VC 150-6 XE) capacities, a field-tested tough casing and Hilti 2-year wear-and-tear coverage (3 years with Hilti Fleet) make the VC 150 family an excellent choice where mobility, durability dependability and power are absolute necessities.

VC 150-6 X and VC 150-10 X VC 150-6 XE and VC 150-10XE

GIVE YOUR DUST COLLECTION STRATEGY A BOOST

VC 150-10 X, VC 150-6 X, VC 150-6 XE and VC 150-10 XE Universal vacuum cleaners


Applications• Dust extraction from grinding, cutting,

slitting, drilling and dry coring tools• Removal of slurry during wet coring

applications• Cleaning wet and dry

Advantages• 150 CFM level to comply with most

OSHA Table 1 silica dust regulations • Versatile, robustly constructed vacuum

cleaner, ideal for use with all Hilti tools• Hilti AirBoost filter cleaning technology

for consistently high suction performance

• Suction hose placement in the head provides high extraction volume and compact design

• Robust housing, wheels and accessories to withstand the harshest jobsite conditions

• Upgradeable with accessories to simplify transportation and carriage of toolboxes, tools and accessories

• Filter cleaning can be switched off to reduce noise and increase water capacity

• Easy handling when emptying the tank and changing filters

• Large wheels allow optimum on-site mobility

Technical data

CFM 153

Capacity 10 and 6 Gal

Hose length 16 ft

Amperage X Line 9 A

Amperage XE Line 20 A with 11 A tool attached

Accessories


Dust bag plastic VC 20/150-6 203854

Dust bag plastic VC 40/150-10 203852

Universal fleece bag VC 150-6 2121560

Universal fleece bag VC 150-10 2121562

High performance filter VC 125/150 436058

HEPA Filter VC 125/150 203879

Filter VC 125/150 universal wet / dry 2121387

Filter VC 125/150 dry 2121386


VC 150-10 X Universal vacuum 2167147

150-10 XE Universal vacuum 3563661

VC 150-6 X Universal vacuum 2167146

VC 150-6 XE Universal vacuum 3563660

VC 150-10 XVC 150-6 X

VC 150-6 XE VC 150-10XE



When you’ve got a big mess, the Hilti universal vacuum cleaner VC 300-17 X picks up where all the others leave off. Built with an impressive 300 CFM of power delivered by two turbines and protected by a tough, field-tested casing, this universal wet and dry vacuum has an automatic filter cleaning system and can pack in a whopping 17 gallons of debris.

It’s the latest and most powerful addition to Hilti’s impressive selection of universal vacuum cleaner solutions. It is built to satisfy industry demands for more capable dust removal solutions and is backed by Hilti 2-year wear and tear coverage (3 years with Hilti Fleet), the VC 300-17 X is built to tackle the most demanding jobs under the toughest conditions.

AT 300CFM, JOBSITE DUST DOESN’T STAND A CHANCE

VC 300-17 X Universal vacuum cleaner


Applications• Two turbines and power filter cleaning

technology for consistent, extremely high suction performance

• Removing slurry produced by wet coring and sawing

• Removing dust produced by drilling, slitting, grinding, cutting and demolition

• Wet and dry dust extraction

Advantages• OSHA 1926.1153 Table 1 compliant with

DCH 300 cutters* and all Hilti tools • Transport handle, sturdy trolley and

large wheels allow optimum site mobility

• Tank concept for easy slurry or dust removal

• Maximum total dust load• Water level sensors and floats help

protect the turbine from flooding• Mobility thanks to large wheels and

trolley• Easy filter exchange

Technical data

CFM 314

Capacity 17 Gal

Hose length 16 ft

Amperage 17.5 A

Accessories


Filter VC 300 universal 2177885

Universal Fleece Bag VC 300 2177884

Suction hose 36x5m accessory 203866

Dust bag VC 300 (10) plastic* 2177881

Paper bag VC 300 203860

* Items will be available fall 2017


VC 300-X Universal vacuum 3563662

VC 300-X + DCH 300 package 3564393

VC 300-X + DCH 230 package 3564392

* Hilti interprets the DCH as Table 1 (xii) “hand-held grinder”

The new Hilti laser range meter PD-CS is packed with all of the convenient features that make life on the jobsite easier. Its integrated laser module captures and saves measurement data directly onto photographs taken by its internal digital camera, making old time-consuming methods that relied on multiple devices — including pencil and paper — things of the past.

Using the PD-CS you can digitize the entire measurement process; measuring distances, adding context to data with pictures and/or text, and sharing that all of that information in a single report via BT, Wi-Fi and Micro USB with just one, powerful but easy-to-use tool.

A SMARTER WAY TO MEASURE

Laser range meter PD-CS


MeasureLocating a target outdoors or at a further distance has never been as easy. The PD-CS is equiped with a digital camera with zoom making locating your target easier, in any lighting. • Easy to use, with an interface based on Android

technology• Take direct and indirect measurements and calculate

area and volume easily thanks to context sensitive help

DocumentAbility to add information to your measurements• For even greater documentation, include notes and

additional pictures with your measurements. Ability to give measurements a name and store in project folders

ShareStop losing time and data• Share your data easily in PDF or CSV format that can

be transferred by USB, Bluetooth or Wifi• Photos with measurements can be exported as image

files (.jpg). The 8GB memory allows you to save more than 6,000 documented measurements, with images and notes

Technical data

Image camera 2x 5 MP image cameras for outdoor targeting and documenting

Memory 8 GB Memory stores over 6000 measurements with pictures

Export documentation Spreadsheet or PDF

Transfer to PC USB, Bluetooth or Wi-Fi

Measuring range 0 – 200m / 656 ft with accuracy +/- 1mm

Battery Integrated Li-ion

Battery life 10h

Screen Color touch screen, usable even with work gloves

IP protection class IP 54


Laser range meter PD-CS 2102498

Accessories


Measuring extension PDA 72 2062052

Target plate PDA 52 226879



When you’re on a tough jobsite and accuracy is critical, you can count on the Hilti green rotating laser PR 3-HVSG. Shining four times brighter than conventional red lasers, the PR 3-HVSG gives you significantly better visibility over longer distances, and can be used in vertical or horizontal orientation.

Packed with the functions you need, like Hilti Pulse Power Technology for highly reliable readings under bright light conditions, a best-in-class leveling time, durability, dependability and ease-of-use, the PR 3-HVSG is ideal for all leveling and aligning applications.

THE POWER OF GREEN IN ATOUGH SHELL

Green rotating laser PR 3-HVSG


• Transferring reference heights• Leveling suspended ceiling• Position drywall track and wall

partitioning• Installation of pipes an cable trays• Green laser provides up to four

times better visibility and a finer, more accurate line compared to a conventional red beam

• 12V battery charges in 30 minutes• Best in class leveling time (6-8s)• Reinforced head, shock absorbing

handles, improved internal damping system and unique robust internal design allow for drop-resistance from standard working height (3 ft/1 m) while maintaining its accuracy

• No-Cost Coverage for 2 years with Hilti Lifetime Service

Technical dataAccuracy (at 75°F / 24°C) ± 1/16 inch at 33 ft (± 1 mm at 10 m)Operating range with laser receiverOperating range of IR-Remote

Diameter: 7 ft – 492 ft (2 – 150 m)Distance: up to 100 ft (30 m)

Battery Life at 73°F (23°C) Li-Ion rechargeable (tool): > 16 hoursLaser class (green visible beam) Class 2, 510-530 nm , < 4.85 mWIP protection IP 64 (IEC 529)Operating temperature 14°F to 122°F (-10°C to 50°C)


Green rotating laser kit PR 3-HVSG

Includes tool, IR-remote, green target plate, 12 V Li-Ion battery, charger and operating instructions in an impact resistant plastic case

3528945

PR 3-HVSG with wall mount & receiver

Includes PR 3-HVSG Rotator, Battery, Charger, PRA 72 Wall mount and PRA 20G Laser receiver 3542821

Green rotating laser kit PR 3-HVSG with Wall mount bracket PRA 72

Includes 3x lasers with its components and 3x Wall mount bracket PRA 72 3528947

AccessoriesDescription Item number

Wall mount bracket PRA 72 2088509

Green laser receiver PRA 20G 2106072

B12 2.6Ah Li-ion battery 2077977

C4/12-50 Charger for B12 batteries 2076996

Target plate (green) PRA 54 226976

IR Remote Control PRA 2 331418

Crank tripod PUA 32 233904

Laser Warning Class 2 (5-pack) 3528370

ADVANCEMENT IN BATTERY TECHNOLOGY

B22/3.0 Advanced compact battery

Hilti’s advanced compact battery B22/3.0 ushers in a new class of Li-Ion batteries. Comparable in application performance to an industrial-class battery, the B22/3.0 offers a dramatic reduction in weight. This adds up to superior tool usability and reduced user fatigue in a broad range of applications. The B22/3.0 is the only compact battery that can be used with every 22V Hilti cordless tool.

This revolutionary new battery is backed by our industry-leading 20-2-1 warranty, fully-sealed for protection against dust, humidity and water. It is drop resistant and built to stand up to the the wear and tear of everyday use in commercial applications.


• The first compact high-performance battery for all Hilti 22V tools

• The latest CPC technology allows higher charging accuracy for longer runtime and intelligently monitors each cell for improved performance

• Fully sealed electronics for increased protection against dust, humidity and water

• The rubberized, glass-fiber reinforced casing is up to 4 times more robust and resistant to damage from dropping and twice as resistant to temperature than standard ABS plastic

• The battery system is designed to absorb drop impacts, even with the additional weight of the tool body

• Industry-leading warranty providing up to 2 year wear and tear coverage with battery replacement

• Easy-to-read state-of-charge monitoring system with 4 LEDs

Technical data

Application temperature range -4 – 140 °F (-20 – 40 °C)

Dimensions (LxWxH) 5.3 x 3.7 x 2.4 in

Battery type Li-Ion

Voltage 21.6 v

Weight 1.3 lbs


B22/3.0 CPC Li-Ion advanced compact battery 2136425




• LED panel provides a light output of 500 lumens while staying cool to the touch

• Natural white light clearly illuminates dark work areas with high color accuracy

• Up to 3 working days of light on a single battery charge

• 3-mode switch for reduced brightness in confined spaces

• Retractable hook for hands-free lighting stows safely inside the lamp body when not in use

• Adjustable LED panel rotates 360 degrees and pivots vertically to provide directional light in a variety of applications

• Illumination of unlit and poorly lit work areas

• Inspection of painted and other finished surfaces

Technical data

Application temperature range -4 – 140 °F (-20 – 40 °C)

Dimensions (LxH) 7.5 x 7.7 in

Battery type Li-Ion

Voltage 21.6 v

Weight 1.1 lbs


SL 2-A22 Task light 2163836

The versatile new Hilti task light SL 2-A22 packs a whole lot of illumination into a very small package. Put it on the ground, hang it by its integrated hook, or hold it in a free hand to put the light just where you need it to get the job done.

The fully-adjustable LED panel rotates a full 360 degrees and pivots so you can put 500 lumens of color-accurate white natural light exactly where you need it. It stays cool to the touch. A 3-position switch lets you select the right amount of light for the job, and a battery that lasts up to 3 full days on a single charge gives you time to get the job done.

The SL 2-A22 is ideal for lighting up dark work areas, inspecting paint and other surface finishes and many other applications. It’s backed by Hilti’s 20-2-1 year warranty against the wear and tear of everyday commercial use, so you can be sure it will be ready to go to work when you are.

SHINE THELIGHT ONPRODUCTIVITY

SL 2-A22 Task light


• Drilling electrical through penetrations• Chipping concrete for plumbing• drains• Drilling for concrete application sets• Drilling hundreds of holes, one after

another for kicker plates• Battery, motor and transmission

designed for unmatched speed drilling into concrete

• Chips like a corded tool two classes larger

• Optimized electropneumatic hammering mechanism for more speed and impact energy

• B36/5.2 AH battery delivers outstanding performance for the extreme user

• Brushless motor delivers long life and high efficiency

• Glass fiber housing and hammering mechanism optimized to provide cooling for long life

• Hammering mechanism, gear and motor produce better heat conductibility for more cool

Technical dataVoltage 36 VAmp hours 5.2 AhSpeed no load 850 rpmFull hammering frequency 4500 blows/minSingle impact energy 2.7 ft.lbsChiseling function YesDimensions (L x W x H) 16.5 x 4.4 x 8.6 inWeight 11.2 lb

With a motor, transmission and battery designed from the ground up for unmatched speeds in drilling and chipping concrete, the Hilti TE 30-A36 cordless combihammer packs plenty of punch to get the job done.

Now the world’s first cordless combihammer is even better, because that knockout power is delivered by our lighter-weight B36/5.2 CPC battery pack platform, compatible with other workhorse Hilti tools like the AG 600-A36 angle grinder and TE 6-A36 rotary hammer.

Delivering the ultimate in drilling performance with outstanding versatility and enhanced compatibility, the Hilti TE 30-A36 cordless combihammer puts all the power you need right in your hands.

POWERFUL, VERSATILE AND COMPATIBLE

Cordless combihammer TE 30-A36


TE 30-A36 Cordlesscombihammer

Includes TE 30-A36 tool body, 2x B36/5.2 CPC Li-Ion batteries, 1x C 4/36 350 watt high speed charger, 1x each of TE CX: 1/4” x 6”, 3/8” x 6”, 1/2” x 6”, 5/8” x 8”, 3/4”-12”, 1”-18”, TE-CP SPM 6/25 wide flat chisel and plastic case

3567671

AccessoriesDescription Item number

Battery pack B 36/5.2 2098470 TE-CP-SPMK 6/18 Wide-flat offset chisel/scraper 282308 TE-CP SM 25 Pointed chisel 282299 TE-C FGM 25 Joint chisel 204741 TE-C KM 2/25 Channel chisel 030221 TE-C BSPM Flexible chisel 2133864 TE-C GB 32/45 x 1-1/4" Bell-shaped bit 220630 TE-C-BK TW 3" Percussion core bit 028896 TE-CX 1"-18" Hammer drill bit 421980 TE-CX 3/4"-18" Hammer drill bit 426825 TE-CX 5/8"-18" Hammer drill bit 435020 TE-CX 1/2"-18" Hammer drill bit 435014 TE-CX 3/8"-12" Hammer drill bit 435007 TE-CX 1/4"-6" Hammer drill bit 435000




Advantages• Unique ATC (Active Torque Control)

system stops the motor almost instantly if the bit binds and the housing begins to rotate too quickly

• High performance-to-weight ratio• Detachable supply cord allows for

quick replacement• Improved performance in large-

diameter coring applications• AVR (Active Vibration Reduction)

for maximum comfort and higher productivity

• 1926.1153 Table 1 compliant when used with either TE DRS-Y or TE-YD hollow drill bit and a Hilti vacuum

Applications • Drilling anchor through-holes in

concrete and masonry• Medium-duty demolition work• Coring in masonry and concrete up

to 4”• Chiseling out penetrations

Technical data

Amperage 13A

Impact energy 5.8 ft-lbs

Weight TE 60-AVR: 15 lbs TE 60-ATC/AVR: 17.2 lbs

Triaxial vibration value TE 60-AVR: 9 m/s2 TE 60-ATC/AVR: 6 m/s2

Impacts per minute 3300 impacts per minute

Optimum hole diameter range (hammerdrilling) 11/16” to 1-9/16”

Maximum hole diameter (hammerdrilling) 2”

Maximum hole diameter (percussion core bits) up to 4”

Connection end SDS-max

Accessories


TE detachable supply cord 2127087

TE DRS-Y (dust shroud) 2055718

Depth gauge 2173276


TE 60-AVR performance package Includes tool with 2 supply cords, 7/8 x 13 drill bit, and pointed chisel 3564151

TE 60-AVR DRS package Includes performance package with TE DRS-Y shroud and a VC 150-6X 3564155

TE 60-ATC/AVR performance package Includes tool with 2 supply cords, 7/8 x 13 drill bit, and pointed chisel 3564152

TE 60-ATC/AVR DRS package Includes performance package with TE DRS-Y shroud and a VC 150-6X 3564156

NEW FEATURESSMARTER TOOLS

SDS-max combihammers TE 60-AVR and TE 60-ATC/AVR

We’ve enhanced the Hilti SDS-max combihammers TE 60-AVR and TE 60-ATC/AVR by building in more features, significantly upgraded performance and more product intelligence than ever before. For you, that adds up to more runtime and less downtime.

You’ll get more work done with innovative and exclusive features like Active Vibration Reduction (AVR) to improve operator comfort, Active Torque Control (ATC) to help protect the operator from kickback if the bit gets stuck, and even a detachable power cord, which you can replace right at the jobsite if needed, to get back up and running.

Our new TE 60s are the first class of Hilti SDS-max combihammers to feature the Hilti Connect app, which lets you use any NFC-enabled device to do everything from getting a comprehensive tool history and summary to sending in a request for a repair from the jobsite.

TE 60-AVR TE 60-ATC/AVR

TE 60-AVR

TE 60-ATC/AVR


Hilti SP and SPX with Equidist floor saw blades offer two outstanding performance levels in diamond cutting blades for walk-behind floor sawing.

When you choose the SP, you get best-in-class cutting speeds and consistent performance over the entire life of the blade. For the most demanding applications, step up to the SPX with Equidist. Precision-manufactured and engineered for maximum cutting speeds, this blade offers extreme versatility and extended blade life.

Our innovative new blades are available in a full range of diameters from 14” to 30” to fit your needs.

SP SPX

CHOOSING THE RIGHT FLOOR SAW BLADE HAS NEVER BEEN EASIER

Floor saw blades SPX with Equidist SP


SP and Equidist SPX floor saw blades cut slabs, openings for concrete repair, and can be used to cut and renovate old concrete

Unmatched speedConsistent and maximum number of diamonds in contact with the base material to ensure that you always cut at the top speed, all day, every day

Unmatched lifeWe strategically position every individual diamond for maximum performance, resulting in an unparalleled lifetime

Unmatched versatilityThe highest quality diamonds, optimized positioning, coupled with our undercut protection allows SPX blades to outperform in a wider range of base materials including concrete, asphalt, and asphalt over concrete and saw horse power levels without compromising performance

SPXBest performance in every way.

SPBetter performance at great value.

BladeDiameter

SPValue

<18 HP

SPXVersatility

< 30 HP

Trial Pack*< 30 HP

SPValue

20-70 HP

SPXVersatility31-70 HP

Trial Pack> 30 HP

14" 2159881 3553264 3552937 2177802 - 3566844**

16" 2159882 3553265 3552938 2177803 - 3566845**

18" 2159883 3553266 3552939 2177804 3559600 3566846*

20" 2159884 3553267 3552940 2177805 3559601 3566847*

24" 2159885 3553268 3552941 2177806 3559602 3566848*

26" - - - - 3559783 -

30" - - - - 3559784 -

HP Horse Power * Includes 1 SPX and 1 SP floor saw blade ** Includes 2 SP blades

Undercut protection offers best versatility when cutting concrete, asphalt, or asphalt over concrete


Description

Sales pack

quantity Item number

X-CX ALH22 100 2149736

X-CX ALH27 100 2149737

X-CX ALH32 100 2149738

X-CX ALH22 12GA 4FT 100 2149814

X-CX ALH22 12GA 6FT 100 2149815

X-CX ALH22 12GA 8FT 100 2149816

X-CX ALH22 12GA 10FT 100 2149817

X-CX ALH22 12GA 12FT 100 2149818

X-CX ALH27 12GA 4FT 100 2149819

X-CX ALH27 12GA 6FT 100 2149820

X-CX ALH27 12GA 8FT 100 2149821

X-CX ALH27 12GA 10FT 100 2149822

X-CX ALH27 12GA 12FT 100 2149823

X-CX ALH32 12GA 4FT 100 2149824

X-CX ALH32 12GA 6FT 100 2149825

X-CX ALH32 12GA 8FT 100 2149826

X-CX ALH32 12GA 10FT 100 2149827

X-CX ALH32 12GA 12FT 100 2149828

Accessories


DX 351-CT 3442190

DX 351 373103

DX 351 pole tool 333310

DX 5 2142307


DX 2 2084262


We created the Hilti X-CX ceiling clip assembly to tackle one of the most demanding applications for powder-actuated fasteners: fastening to concrete to suspend ceiling grid and light fixtures.

A new clip that reduces concrete spall while properly aligning the nail head, coupled with a new nail that penetrates even in the toughest conditions, the Hilti X-CX ceiling clip assembly offers better penetration, improved bending resistance and is suitable for use with a wide range of Hilti fastening tools.

CEILING APPLICATIONS DEMAND BETTER FASTENERS

X-CX ALH Ceiling Clips


Applications • Suspending ceilings from concrete

and concrete over metal deck using 8, 9 or 12-gauge ceiling wire hangers

• Fastening and suspending light-duty electrical and mechanical services

Advantages• Preassembled ceiling clip with Class 1

wire and nail• Nail with long conical tip for better

penetration in hard concrete• Dome design for improved guidance

while driving the nail• Larger-diameter nail for improved

bending resistance• Suitable for use with a wide range of

Hilti fastening tools

Technical data

Base materials Concrete, concrete over metal deck, hard concrete

Fastener lengths 22 mm (7/8”), 27 mm (1”), 32 mm (1-1/4”)

Fastener shank diameter 4.5 mm (.177 in)

Point tip Long conical

ALWAYS READY TO STAY AHEAD

Powder-actuated tool DX 5

Meet the next generation of better, smarter, powder-actuated tools. Hilti’s powder-actuated tool DX 5 extends Hilti’s DX technology with the exciting new DX 5 Smartool feature that works with the Hilti Connect App to make tool care and management easier and more intuitive than ever before.

DX 5-F8 DX 5-MX DX 5 Kit DX 5-IE

DX 5-F10 DX 5-SM DX 5-GR


• Fastenings on high strength steel and concrete base materials

• Ideal for fastening 2x4 wood, plywood and drywall track

• Insulation board, waterproofing membrane and grating applications

• Fastening point tracking for preventative maintenance planning

• Bluetooth connectivity to Hilti Connect App allows easy access to data and info anytime, anywhere


Powder-actuated tool DX 5-F8 2142307

Powder-actuated tool DX 5-MX 2142651

Powder-actuated tool DX 5 Kit 2142655

Powder-actuated tool DX 5-IE 2142659

Powder-actuated tool DX 5-F10 2142665

Powder-actuated tool DX 5-SM 2142666

Powder-actuated tool DX 5-GR 2142662

Accessories


Receptacle X-PT 5 2150263

Pole tool X-PT 5 7ft 2150264

Cleaning kit 372810

Piston accessory kit (F8 and MX) 2092078

Compact tool case 2145461



As a leader in Firestop Cast-in devices, Hilti continues to bring innovation to the industry with the first and only 8” and 10” Firestop Cast-in devices. The Hilti CFS-CID 8” and 10” Firestop Cast-in devices are the only cast-in devices on the market that allow for use with 8” and 10” pipes for water drainage and large pipe applications. Whether you are running 8” PVC, metal pipes, metal pipes with insulation or 10” metal pipes, use these labor saving cast-in device for your application needs.

The new CFS-CID 8” and 10” Firestop Cast-in devices require only one laborer to install versus two laborers with traditional methods. With multiple application uses and a safe and time saving installation process, the Hilti CFS-CID 8” and 10” Firestop Cast-in devices are the cast-in solutions you have been waiting for.

CFS CID 8” & 10” M CFS CID 8” P

FIRESTOPCAST-INDEVICE

CFS CID 8” & 10” M CFS CID 8” P


Advantages• One-step firestop solution for 8” and

10” pipes-no additional sealing required• Ready to use straight out of the

package• Increased productivity helps reduce

labor costs• Quick and simple installation• Reduces the chance of project delays

due to failed inspections• No expiration date (no shelf life)

Applications • New building construction

(flat concrete)• For use with PVC, metal and

metal with insulation• Available in 6”, 8”, 10”, 12”, 14” heights

Technical data

Application Temp min-max -40 to 120F

Base material Concrete

Intumescent Yes

Mold and mildew performance Class 0 (ATM G21-96)

Storage Temp min-max -40 to 120F

W rating Yes, with sealant

DescriptionSales pack

quantity

6” height Item

number

8” height Item

number

10” height Item

number

12” height Item

number

14” height Item

number

FS cast-in device CFS-CID P 8” 1 pc 2155563 2155564 2155565 2155566 2163201

FS cast-in device CFS-CID M 8” 1 pc 2163202 2163203 2163204 2163205 2163206

FS cast-in device CFS-CID P 10” 1 pc 2163207 2163208 2163209 2163210 2163211

FS cast-in device CFS-CID M 10” 1 pc 2163212 2163213 2163214 2163215 2163216

P = Plastic pipes and metal pipes with insulationM =Metallic pipes

INNOVATION AT YOUR FINGERTIPSAnytime. Anywhere.

Whatever your trade, whatever the job, you probably rely on an array of digital devices — from personal computers to smart phones — to deliver inspiration and information wherever and whenever you need them.

Hilti’s broad portfolio of application-specific online catalogs for trades including civil, building construction, electrical, interior finishing, mechanical, oil & gas, power, steel metal and industrial & commercial make it easier than ever for you to connect to the ideas and products you need to get the job done.

To get started, visit:

• Civil

• Building Construction

• Electrical

• Interior Finishing

• Mechanical

• Oil & Gas

• Power

• Steel Metal

• Industrial and Commercial

1-800-879-8000 • www.hilti.com 1-800-363-4458 • www.hilti.ca


Game changing solutions that maximize jobsite productivity. Installing drywall track is a fixed cost on a project. Hilti’s Total Track Solution is a pre-formed solution that seals drywall joints at the same time you install your track. No need to come back and address the joint area with sealant or other methods.

Simply saddle your track with TTS, install track and done. No mess, zero waste.

Firestop track seal CFS-TTS and new Smoke & accoustic track seal CS-TTS SA is availabe in 3-5/8” and OS which is a flexible solution for any track size.

GET YOUR JOB ON THE RIGHT TRACK WITH TOTAL TRACK SOLUTIONS

Firestop track seal CFS-TTS Smoke & acoustic track seal CS-TTS SA

Technical data CFS-TTS CS-TTS SA

Chemical basis Polyurethane foam Polyurethane foam

Color Silver/Red Light grey

Application temperature range 23° to 104°F 23° to 104°F

Storage and transportation temperature range

14° to 104°F 14° to 104°F

Mold and mildew performance Class 0 (ASTM G21-96) andClass 0 (EN ISO 846)

Class 0 (ASTM G21-96) andClass 0 (EN ISO 846)

Tested in accordance with ASTM E 90, ASTM G21, UL 2079, ASTM E 1966, ASTM E84/UL 723, ULC 115, CAN/ULC-S102

ASTM E 90, ASTM G21, CAN/ULC-S102, UL 2079 (L-Rating), UL 723, ASTM E84/UL 723

California state fire marshal approval

Yes -

LEED VOC 0.18 lb/gal (US) .20 lb/gal

Acoustics performance Test report available Test report available

TOTAL TRACK SOLUTIONS

Features • Fast installation — fewer working steps (once and done)• Excellent sealing properties designed for reliability under

real jobsite conditions (STC and smoke seal on imperfect concrete)

• Firestop Track Seal CFS-TTS is tested in accordance with UL 2079 5th edition

• No mess, zero waste — no caulking or tools required• Simple — ideal shape designed to saddle over top track

without additional folding, taping or gluing• Versatile solution for any track size under real jobsite

conditions

Applications• Firestop, smoke and sound seal for head-of-wall joints

between top track and gypsum to flat concrete slabs• Suitable for wall-to-wall (WtW) or bottom-of-wall (BoW)

application of drywall system• Designed for a perfect friction fit with common track sizes —

3-5/8” and 6”• OS is designed for a flexible solution for various track

applications• Smoke and sound seal for head-of-wall joints between top

track and gypsum to flat concrete slabs



Technical data CFS-TTS CS-TTS SA

Chemical basis Polyurethane foam Polyurethane foam

Color Silver/Red Light grey

Application temperature range 23° to 104°F 23° to 104°F

Storage and transportation temperature range

14° to 104°F 14° to 104°F

Mold and mildew performance Class 0 (ASTM G21-96) andClass 0 (EN ISO 846)

Class 0 (ASTM G21-96) andClass 0 (EN ISO 846)

Tested in accordance with ASTM E 90, ASTM G21, UL 2079, ASTM E 1966, ASTM E84/UL 723, ULC 115, CAN/ULC-S102

ASTM E 90, ASTM G21, CAN/ULC-S102, UL 2079 (L-Rating), UL 723, ASTM E84/UL 723

California state fire marshal approval

Yes -

LEED VOC 0.18 lb/gal (US) .20 lb/gal

Acoustics performance Test report available Test report available


Smoke & acoustic track seal CS-TTS 358 2173979

Smoke & acoustic track seal CS-TTS OS 2174120

Smoke & acoustic track seal CS-TTS 600 2174121


Firestop track seal CFS-TTS 358 2128716

Firestop track seal CFS-TTS OS 2128714

Firestop track seal CFS-TTS 600 2128717

Firestop track seal CFS-TTS

Firestop track seal CFS-TTS

Smoke & acoustic track seal CS-TTS SA

Smoke & acoustic track seal CS-TTS SA


A modular support system has to provide great versatility during installation as well as high performance in the final structure. The new MIQ heavy-duty system combines these features perfectly — rigid girders, easy-to-install connectors and seamless connection of MQ parts for endless installation possibilities.

Developed for maximum versatility without compromising performance, MIQ is our latest installation innovation.

HOLDS UP EVERYTHING BUT YOUR SCHEDULE

MIQ channel system


Applications • Cable tray supports• Electrical and Instrumentation stands• Overhead grids• 3-D frames• Pipe supports

Advantages• One system for medium and heavy-

duty applications• High flexibility thanks to integrated MQ

profile• Hot-dip galvanized for longer life in

corrosive environments Flexible assembly

The wide range of connectors available makes it easy to find those that fit the needs of your application perfectly. Heavy or light, both quick and easy

MQ compatibility

Thanks to the strut profile on two sides of the girder, parts can be fitted extremely easily, including brackets, supports and various connectors.

When we used cutting-edge technology including Finite Element Analysis to design the Hilti high-strength modular support system MI specifically for our North American customers, we had one thing in mind: increased load capacity.

Complete your designs with confidence using higher and more comprehensive load-capacity data. The increased strength of the MI next generation reduces the need for bracing and increases spans; resulting in faster installation, streamlined planning and enhanced installation flexibility.

DESIGNED FORSTRENGTH

MI next Generation


• Upgraded concrete and steel baseplates and concrete brackets

• Introducing high strength brackets to steel for fast and easy installation

• New innovative connectors that are compact and highly versatile

• Now available on PROFIS Installation and updated in BIM library



FAST, FLEXIBLE AND INNOVATIVE ROOFTOP SUPPORT SYSTEM

Load distribution plates MV-LDP and MI-LDP

Hilti MV-LDP and MI-LDP load distribution plates are ideal for supporting pipe, ventilation duct, HVAC equipment, cable trays and many other mechanical and electrical installations. Available for both MQ channel systems and higher load MI girder systems, these supports are designed to minimize point loading and to reduce the possibility of damage to the roof membrane.

These supports feature high load capacity which means fewer plates are needed to get the job done, resulting in less material and labor costs. Combine the MV-LDP with other innovative features like the MQN push button and contractors will save time and labor costs with this fast and easy to install solution.


• Installation of air conditioning units, walkways, ventilation ducts, pipework or cable trays on flat roofs

• MQ channels can be easily attached to the fitting using the MQN push button or MQM wing nut

• MI girders can be easily attached to the load distribution plate using the uplift resist pipe saddle connector (sold separately)

• For flat and low-pitched roofs• Up to 7° adjustment for compensation

of roof pitch• Rotatable through 360° to allow fast,

easy installation of MQ channels• Pivoting joint allows equal load

distribution on the base surface


MV-LDP load distribution plates for MQ 2048106

MI-LDP load distribution plates for MI (available through special order) 2153636

Uplift resist pipe saddle connector (for use with MI; sold separately) 3533477

Accessories


Protective separation fleece (for use with MI and MQ) 2050264

Hilti injectable mortar HIT-ICE is the extreme-cold weather solution for adhesive anchoring in cracked, uncracked and grout-filled masonry. Its unique formulation provides consistent fastenings in temperatures as low as -10°F/ -23°C.

HIT-ICE dispenses fast and easy in freezing weather without need to condition the cartridge until the temperature drops below 0°F / -18°C, keeping you on the job even when winter says you have to take the day off.

DON’T GET LEFT OUT IN THE COLD

Injectable mortar HIT-ICE


Advantages• Low temperature adhesive anchoring

system for applications down to -10°F / -23°C in concrete

• Dispenses fast and easy even in freezing weather

• No need to warm the cartridge before use unless the cartridge temperature falls below 0°F / -18°C

Applications • Anchor installation and rebar doweling

for cracked concrete, uncracked concrete, and grout filled masonry in cold environments


Injectable mortar HIT-ICE 10oz/300ml 2055412

Injectable mortar HIT-ICE MC 10oz/300ml 3498239

Injectable mortar HIT-ICE 10oz/300ml MC + MD 1000 3498239

Accessories


Manual dispenser MD 1000 371291

Mixing nozzle HIT-ICE 371290


As your partner in chemical anchoring applications, Hilti offers a broad portfolio of pre-cut anchor rods to meet a wide range of needs, available right off the shelf. With sizes ranging up to 1-1/4”, featuring chamfered ends with nuts and washers included, you know Hilti anchor rods will help you get the job done quickly, efficiently, and right — without compromising your budget.

We now offer “cut-to-length” service for custom-made anchor rods. Select from 8 material types, diameters up to 2-1/2” and anchor rod lengths up to 48”. Just let us know what you need and we’ll have your custom solution anchor rods delivered to you within 2-4 working days (typical lead time).

CUSTOM MADE TO FIT

Cut-to-length anchor rods


• Large range of materials and anchor rod diameters (1/4” to 2-1/2”)

• Head marking for easy verification of steel grade

• Available with chisel tip for use with HVU adhesive capsules

• Includes high-quality nuts with matching steel grade and thread tolerances for reliable performance

• Free of oil and other contamination for highest performance with adhesive anchoring systems

• Chamfered end ensures easy threading of the nut

ORDERING INSTRUCTIONS

For a quote or to order custom made anchor rods, call Hilti Customer Service at 1-800-879-8000. This service is currently available only in the United States.

MaterialElectro plated Hot dip galvanized Stainless steel

ASTM F1554grade 36

ASTM F1554grade 55

ASTM F1554grade 105

ASTM F1554grade 36

ASTM F1554grade 55

ASTM F1554grade 105

SS 304

SS 316

Thre

ad S

ize

1/4”

5/16”

3/8”

1/2”

5/8”

3/4”

7/8”

1”

1-18”

1-1/2”

1-3/4”

2”

2-1/4”

2-1/2”

Typical lead time 2–4 working days Available starting July 2017

Available upon request, check lead time with Hilti Available starting October 2017

CUSTOM MADE ANCHOR RODS COME IN:

• Eight different materials• Diameters up to 2-1/2”• Lengths up to 48” (lengths up to

144” upon request; may have longer lead-time)

RELATED PRODUCTS

Injectable adhesive anchor

Capsule adhesive anchors

CHOOSE YOUR: ① Diameter

② Length

③ Material:• Electro plated• Hot dip galvanized• Stainless steel

①

②Leverage the productivity advantage of screw anchors, even when the application demands corrosion-resistance, with Hilti screw anchor HUS-HR/CR (SS316).

The HUS-HR/CR yields up to 50% faster installation time than stud anchors and has the option of a countersunk head for setting flush to the surface.

EFFICIENCYMEETSVERSATILITY

Screw anchor HUS-HR/CR (SS 316)

APPLICATIONS AND ADVANTAGES• Miscellaneous metal (railing, fencing)• Glazing (facades, window wall)• General construction (tunnels, waste water

treatment plants, seating) • Required metric drill bit with every box• Fits within standardized fractional base plate

holesProductivity • Up to 50% faster installation time compared

to stud anchors• Drill. Drive. Done. Everywhere.Safety • No torque-wrench required• Set-flush with the surface, done.Technical data • PROFIS ready• Tested in accordance with ACI 318 and

CSA A23.3Edging and spacing • Closer spacing reduces base plate size• Manage challenging situations with reduced

edgingAnchor design• Carbide cutter blades welded onto tip to cut

concrete with ease• Pure Stainless Steel 316 (>99 %) • Available with countersunk head Easily removable • Fully removable solution• No grinding or hammering in necessary

PACKAGES FOR SIMPLE PLANNING, ORDERING AND INSTALLATION

Anchor package I:1 box of anchors + 1 drill bit

Anchor package II:1 master carton + drill bits + 1 socket

• Small projects• Additional jobsite orders

• Regular project orders• Purchase for stock

HUS-HR

Diameter HUS-HR

Length in

inch

Number of

anchors

Drill bits

Base plate hole

Item number

Diameter HUS-HR

Length in

inch

Number of

anchors

Drill bits Sockets Item

number

M61-3/4” 50 1 5/16” 3563440

M61-3/4” 200 4 1 3563544

2-3/4” 50 1 5/16” 3563441 2-3/4” 200 4 1 3563545

M83” 25 1 7/16” 3563442

M83” 100 2 1 3563546

3-1/4” 25 1 7/16” 3563533 3-1/4” 100 2 1 35635474-1/8” 20 1 7/16” 3563534 4-1/8” 100 2 1 3563548

M103-1/4” 25 1 9/16” 3563535

M103-1/4” 100 2 1 3563549

4-1/8” 25 1 9/16” 3563536 4-1/8” 100 2 1 35635505-1/8” 25 1 9/16” 3563537 5-1/8” 100 2 1 3563551

M143-1/8” 12 1 11/16” 3563538

M143-1/8” 48 2 1 3563552

5-1/4” 12 1 11/16” 3563539 5-1/4” 48 2 1 3563553

HUS-CR

Diameter HUS-CR

Length in

inch

Number of

anchors

Drill bits

Base plate hole

Item number

Diameter HUS-CR

Length in

inch

Number of

anchors

Drill bits

Torx Driver

Item number

M83” 25 1 7/16” 3563436

M83” 100 2 1 3563540

3-3/4” 20 1 7/16” 3563437 3-3/4” 100 2 1 3563541

M103-1/4” 25 1 9/16” 3563438

M103-1/4” 100 2 1 3563542

4-1/8” 25 1 9/16” 3563439 4-1/8” 100 2 1 3563543

HUS-HR HUS-CR

Click for more technical information

Leverage the productivity advantage of screw anchors, even when the application demands corrosion-resistance, with Hilti screw anchor HUS-HR/CR (SS316).

The HUS-HR/CR yields up to 50% faster installation time than stud anchors and has the option of a countersunk head for setting flush to the surface.

EFFICIENCYMEETSVERSATILITY

Screw anchor HUS-HR/CR (SS 316)

APPLICATIONS AND ADVANTAGES• Miscellaneous metal (railing, fencing)• Glazing (facades, window wall)• General construction (tunnels, waste water

treatment plants, seating) • Required metric drill bit with every box• Fits within standardized fractional base plate

holesProductivity • Up to 50% faster installation time compared

to stud anchors• Drill. Drive. Done. Everywhere.Safety • No torque-wrench required• Set-flush with the surface, done.Technical data • PROFIS ready• Tested in accordance with ACI 318 and

CSA A23.3Edging and spacing • Closer spacing reduces base plate size• Manage challenging situations with reduced

edgingAnchor design• Carbide cutter blades welded onto tip to cut

concrete with ease• Pure Stainless Steel 316 (>99 %) • Available with countersunk head Easily removable • Fully removable solution• No grinding or hammering in necessary

PACKAGES FOR SIMPLE PLANNING, ORDERING AND INSTALLATION

Anchor package I:1 box of anchors + 1 drill bit

Anchor package II:1 master carton + drill bits + 1 socket

• Small projects• Additional jobsite orders

• Regular project orders• Purchase for stock

HUS-HR

Diameter HUS-HR

Length in

inch

Number of

anchors

Drill bits

Base plate hole

Item number

Diameter HUS-HR

Length in

inch

Number of

anchors

Drill bits Sockets Item

number

M61-3/4” 50 1 5/16” 3563440

M61-3/4” 200 4 1 3563544

2-3/4” 50 1 5/16” 3563441 2-3/4” 200 4 1 3563545

M83” 25 1 7/16” 3563442

M83” 100 2 1 3563546

3-1/4” 25 1 7/16” 3563533 3-1/4” 100 2 1 35635474-1/8” 20 1 7/16” 3563534 4-1/8” 100 2 1 3563548

M103-1/4” 25 1 9/16” 3563535

M103-1/4” 100 2 1 3563549

4-1/8” 25 1 9/16” 3563536 4-1/8” 100 2 1 35635505-1/8” 25 1 9/16” 3563537 5-1/8” 100 2 1 3563551

M143-1/8” 12 1 11/16” 3563538

M143-1/8” 48 2 1 3563552

5-1/4” 12 1 11/16” 3563539 5-1/4” 48 2 1 3563553

HUS-CR

Diameter HUS-CR

Length in

inch

Number of

anchors

Drill bits

Base plate hole

Item number

Diameter HUS-CR

Length in

inch

Number of

anchors

Drill bits

Torx Driver

Item number

M83” 25 1 7/16” 3563436

M83” 100 2 1 3563540

3-3/4” 20 1 7/16” 3563437 3-3/4” 100 2 1 3563541

M103-1/4” 25 1 9/16” 3563438

M103-1/4” 100 2 1 3563542

4-1/8” 25 1 9/16” 3563439 4-1/8” 100 2 1 3563543

HUS-HR HUS-CR

Click for more technical information


The Split Bolt HSH, the Drywall Anchors HSP/HFP and the Metal HIT anchor HMH are the latest updates to our extensive light duty anchor product portfolio.

The Hilti drywall anchor HFP cuts its own thread, is removable, and can be set with nothing but a screwdriver. Split Bolts HSH and Metal HITS HMH are ideal for fastening to concrete and masonry, are tamper-proof and can be installed with a drill and a hammer.

Whether you’re fastening to concrete and masonry or drywall, this extension to our light duty anchor portfolio assures we have the right anchor for your application.

HSH HMH HSP HFP

AN ANCHORFOR EVERY DAYOF THE WEEK

Light duty portfolio extension

HFP

HMH

HSH

HSP


Split bolt HSH and Metal HIT HMH • Electrical fixtures• Track attachment• Roof flashing• Concrete form work• Tamper-proof applications

• Wide length range up to 3-1/2” for HSH• Split bolt HSH with 2 head configuration

Round head (RH) and Flat head (FH)• Longer lengths available up to 3” for Metal

anchor HIT HMH in stainless and carbon steel• Drill, hammer and you’re done

Drywall anchors HSP/HFP• Office installations• Electrical fixtures• Interior finishing

• Cuts its own thread, no pre-drilling necessary• Available in non-conductive nylon or zinc and

with or without screw• Opening in head allows longer screws to pass

through-more flexibility• Published allowable shear load of 35 lb• Can be set with electric or standard screwdriver Accessories for Split bolt HSH and Metal anchor HIT HMH

Description Quantity Item number

Compact cordless rotary hammer TE 2-A22 1 3490196

Hammer drill bit TE-CX 1/4” x 6” 8 Pk 2025906

Description Anchors per box Item number

Split bolt

Split bolt HSH 1/4" x 1-1/4" RH 100 2173472


Split bolt HSH 1/4" x 2" RH 100 2173474


Split bolt HSH 1/4" x 1-1/2" FH 100 2173476

Split bolt HSH 1/4" x 2" FH 100 2173477


Split bolt HSH 1/4" x 3" FH 100 2173479


Metal HIT (additional lengths)

Metal anchor HIT HMH 1/4" x 2-1/2" SS 100 2173260

Metal anchor HIT HMH 1/4" x 3" SS 100 2173261

Metal anchor HIT HMH 1/4" x 2-1/2" 100 2173408

Metal anchor HIT HMH 1/4" x 3" 100 2173409

Drywall anchor

Drywall anchor HSP (metal) w/o screws 100 2158777

Drywall anchor HSP (metal) w/ screws 100 2158778

Drywall anchor HFP (nylon) w/o screws 100 2158779

Drywall anchor HFP (nylon) w/ screws 100 2158780

Hilti Modular Supports Plug-In for Smart Plant 3D is a design and planning tool for piping, cable tray and HVAC duct supports used in chemical, power, mining, oil, and gas construction projects. With the Plug-In for Smart Plant 3D, your design team will be able to automate the process of placing Hilti Modular Support Systems into your design. The Hilti Modular Supports Plug-In for Smart Plant 3D reports Hilti Modular Supports in material takeoffs, bill of materials generation and allows for clash detection, minimizing risks and changes on the jobsite.

SOFTWARETO SUPPORTYOUR DESIGN

Modular Supports Plug-in for Smart Plant 3D


Applications• Plug-in has some generic assemblies

along with Hilti connection logic, which allows to make Smart Supports

• Designing by using smart support templates for rule-based frame supports such as I, L, T, U-shape, wall-to-wall or channel to steel/concrete — please refer to the manual supplied with the product for more details

• Plug-in has more than 700+ Hilti Parts from Hilti Channel and Strut Library

• Designing multi-disciplinary frame supports for pipes, cable trays and HVAC ducts or combining multiple supports to create more complex support structures

• Creating bills of materials and drawings in compliance with the engineering design basis

Technical data

Supported operating system Windows 7®

System requirements As per Host System

Security and authorizations Hilti signed software

Minimum required disc space 1024 MB

Graphic card requirement OpenGL 3.0 support


Hilti Modular Supports Plug-in for Smart Plant 3D 2163669

Advantages • 3D digital design content for Hilti

products and support libraries for modular frame supports

• Available as a plug-in for Intergraph’s Smart™3D

• Contains more than 700+ Hilti parts from the Hilti channel and strut library

• A must-have for engineers and designers planning their next CAPEx project using modular solutions

• Lets you easily adapt an engineering specification to a project specification using Microsoft™ Excel spreadsheets


FEATURES

Flexible Point Creation• Create control points• Insert manual points• Generate automatic point locations to

streamline the creation of layout data in their model files

• Place points over blocks• Recognizes the insertion point of the

block to create a point• Results in an efficient automatic point

insertion process on AutoCAD blocks

Place points over family• Recognizes nodes within the family

and grants automatic point insertion capability on a Revit family

• Simplifies the point creation process

Placing annotations• Automatically add annotations to field

points• Manually add annotations to a field

point; annotations are based on the selected insertion point

• Applies annotation settings to annotations associated with selected field points, as well as field properties

Custom reports• Reports documenting the status of

specific or all points within a drawing• Deviation reports can be generated

upon importing staked points• Deviation reports illustrate how point

locations might have changed from their initial location in the drawing/model

• Ideal tool for documenting changes between the office and actual field conditions

Easy field data import• Users can import field point data into

the Hilti PROFIS Field Points software while staying in their preferred design platform to assist with their QA/QC work flows for comparison in the model

• Miscellaneous items such as anchor bolt locations, sleeves, hangers, etc.

Hilti PROFIS Field points for AutoCAD/Revit is for contractors and engineers who need to easily create 2D and 3D field points within their design software.

To ensure easy stake-out on the jobsite, you can automatically insert field layout points for use with Hilti’s best-in-class construction positioning and layout systems, and import and export data to AutoCAD and Revit to review point layout status and accuracy.

PROFISFIELD POINTS

for AutoCAD / for Revit


ALL IN ONE PROFIS Detection

Hilti PROFIS Detection is our all-in-one, comprehensive software solution for the Hilti PS 1000 and Ferroscan systems. It features full data processing from raw data to 3D models, combines Ferroscan data with X-Scan radar data, and incorporates EM sensor data for depth calibration and material classification.

PROFIS Detection allows for grid coordinate entry drill hole marking. It provides comprehensive options for reporting and documentation after scan analysis, and lets you export your results to PROFIS Anchor, AutoCAD, Sketch-Up, Revit and other popular applications.


Applications• Non-destructive inspection and

analysis of concrete structures, creation of assessment reports and documentation for structrual analysis and as-built checks

• Scan positions can be labeled with building coordinates and exported for accurate scan placement in design files or repositioned later on-site with layout tools

• Allows export of scan data for use with popular design applications such as AutoCad, Trimble SketchUp and many more

• Evaluation of structural layout to minimize potential for damage when drilling, coring or sawing — structural information also allows more accurate communication and tightens up bidding projects on jobs based on what operators find in the area

• Export X3D scan file to import in PROFIS Anchors for collision-free anchor and base plate design

• Creates an accurate 3D model of what is actually in the concrete structure and allows integration in the BIM platform in order to create more efficient, accurate, cost-effective and reliable project

Technical dataCPU requirements 2GHz or faster x86-compatible processor

Graphic card requirement Open GL 3.2 support

Memory (RAM) requirements 2 GB

Minimum required disc space 250 MB


PROFIS Detection 1-year subscription 2115901

planning to support design, refurbishment or extension of existing structures

• Concrete cover assessment showing where depth of cover is inadequate, for structural repair work and statistics with Hilti Ferroscan scan data

• Building acceptance inspections, rebar verification and analysis as well as quality control

Advantages • Subsequent scan data analysis and

data management on a PC for PS 1000 X-Scan and PS 200/250 Ferroscan

• Full data processing from raw data to 3D models, including 2D and 3D plan views or cross-sectional images

• Advanced processing software with comprehensive evaluation and analysis features using different migration types as well as various calculation and visualization parameters

• Easy creation of assessment reports and documentation in Microsoft Word, PDF or HTML format

• Data export in various formats — 2D (BMP, JPG) and 3D (DXF, COLLADA, PLY, X3D)

• Three-sensor data overlay: radar, EM and Ferroscan for easy target object classification and depth calibration

• Scan position can be labeled with building coordinates and exported

• Drill hole markers in true diameter and depth can be added and positioned in top and cross-sectional view and exported

• Preparation of ready-to-print assessment reports and statistics (allowing qualitative and quantitative analysis of the situation regarding reinforcement and depth of concrete cover) for PS 200/250 Ferroscan


ALL IN ONE PROFIS Layout Office

Import digital plans and create layout/control points more easily than every before with Hilti PROFIS Layout Office, the all-in-one point creation software solution. Its simple user interface, which can be operated with minimal training, makes it easy to use and the perfect fit for those times when more complex CAD programs are too much tool for the job.

Perform distance, angle, area or down-and-out computations, then upload the files to your Hilti total station for jobsite layout.


Applications• CAD import: Ability to import AutoCAD

DWG and DXF files for creating layout points

• Graphical user interface: Provides direct access to common functions for a shorter learning curve and minimal self-training

• Standard view controls: Offer a common user interface designed for anyone with a limited understanding of CAD for fast, easy operation

• Point creation: Multiple point selection in Individual, Window, or Current view point selection together with layers for maximum control of point selection

• Enter plans: Lets you enter plans on the spot and perform COGO (coordinate geometry) functionality in the office

• Field to finish: Easily create CAD-ready deliverables directly from survey data

• Straight forward: No need to learn a complex engineering CAD program

Technical dataOperating system Windows 7 or later

Compute processor 64-bit quad core CPU

Computer memory 8 GB RAM

Screen resolution 920 x 1080 pixels

Graphic card Open GL-compatible graphics card with > 1 GB

Max file size 60 MB

Max no. of points 50000


PROFIS Layout Office 1-year subscription 2117533

Advantages • Easy creation of a digital replica of your

paper construction plans• Office solution for preparation and

evaluation of your data to and from the field

• Creation of layout points from CAD files, files for uploading to a Hilti total station for layout


Get more work out of every 22V charge with the all-new Hilti Cordless Band Saw SB 4-A22. Its compact size gets you working in tight spots with ease, cutting through a wide range of materials from plastics to metal rods, pipes and struts with fewer sparks and less noise. An integrated, ultra-bright LED lamp puts working light exactly where you need it.

Like all Hilti tools, it’s built to deliver outstanding performance and reliability even in the most extreme situations, under the toughest circumstances. Backed by an outstanding 20-year warranty against manufacturing defects, which includes a 2-year warranty against the wear-and-tear of commercial use and a 1-day repair turnaround guarantee, you can count on the Hilti Cordless Band Saw SB 4-A22 to make the cut.

MAKING THE CUT —THE NEW CORDLESSBAND SAW

Cordless band saw SB 4-A22


Advantages• Cutting with low noise and low debris • Compatible with Hilti 22V batteries • Built-in LED lamp for a shadow-free

view of the cutting line • Compatible with 28.875” x 0.5” band

saw blades • Impact-resistant, glass-fiber-reinforced

tool and battery casings

Applications • Cutting metal installation channels and

pipes with reduced sparks and low noise

• Cutting plastic pipes • Cutting threaded rods • Cutting 1” and 2” EMT pipes • Cutting 1-5/8” strut

Technical data

Weight according EPTA-Procedure 01/2003 8.8 lb

No load speed 167 rpm

Rated voltage 21.6V

Max cutting width 2-1/2”

Dimensions (LxWxH) 13.8 x 9.8 x 8.5 in

Description Package content10/14 Blades Item number

14/18 Blades Item number

SB 4-A22 Industrial battery combo

Includes 1x tool, 2x Batteries, 1x Charger, 1x 3-pack of Blades and Small Tool Bag

3559785 3559789

SB 4-A22 Compact battery combo

Includes 1x tool, 2x Batteries, 1x Charger, 1x 3-pack of Blades and Small Tool Bag

3559786 3559790

SB 4-A22 Tool body only Includes tool body and 1x 3-pack of Blades 3559787 3559788

Accessories

Description3 Pack

quantity10/14 Blades Item number

14/18 Blades Item number

SB 4 BM Band saw blades 1 Pack 2150031 2150032

DUST CONTROL PRODUCTS AND SOLUTIONSClearing the air on the new OSHA respirable crystalline silica dust regulation

At Hilti, we are committed to helping you reduce dust exposure and increase your productivity on site with products and services designed to greatly reduce exposure to dust. It’s time to take advantage of all the benefits of Hilti dust removal systems.

We have designed resources and solutions to help professionals just like you in the construction industry better understand and comply with the new OSHA 1926.1153 regulations for silica dust exposure.

OSHA Table 1Choose a pre-determined option based on your application, fromOSHA Table 1 — Exposure Control Methods for Silica Dust.

Objective Data or Performance TestingUtilize third-party performance or objective data to document that workers performing a particular application are in compliance with the permissible exposure limit of ≤ 50 μg/m3 average over an eight hour day.

Scheduled Air MonitoringPeriodically test for a particular application to validate if the user falls under the permissible exposure limit of ≤ 50 μg/m3.

Click to watch an informational OSHA silica dust webinar

THERE ARE THREE WAYS TO COMPLY WITH OSHA SILICA DUST REGULATIONSClick the icons below to download each resource


HILTI DUST CONTROL PRODUCTS AND SOLUTIONS

Learn more about Hilti dust control products and solutions for your application

MANAGE EMPLOYEE CERTIFICATIONS AND TRAININGS

Navigating the new OSHA silica dust regulation (1926.1153) goes beyond understanding the rules and having the proper equipment. Click to learn more.

OSHA SILICA DUST RESOURCES

Hilti Product Selector Guide

Hilti White Paper OSHA Standards to Silica Dust

DRIVERS LICENSES

LIFT CERTIFICATIONSASBESTOS TRAINING POWDER TOOL CERTIFICATIONS

OSHA CERTIFICATIONSFALL PROTECTION CPR & FIRST AID

HAZMAT LEAD CERTIFICATION

CRANE OPERATION

CORDLESS IN CHARGESolutions for every jobsite

Advanced cordless technology helping drive your business. Featuring intelligent power management systems and delivering maximum performance, our cordless tools are the professionals’ choice for any job. Our batteries are the toughest out there, so when you’re ready to work, your tools are ready to work too.

Click to learn more about cordless tool application solutions

Click to learn more about our Lithium-Ion battery technology

APPLICATION SOLUTIONS No matter what kind of projects you work on or which trades you specialize in, Hilti has the cordless platform to help you get the job done.

CORDLESS TECHNOLOGYOur batteries provide the power to outperform under the toughest jobsite conditions. These lightweight, lithium-ion batteries charge quickly and hold a charge longer, so you can be sure that your tools are ready to work when you are.

• Drilling• Screw Fastening• Bolting and Anchoring• Cutting• Direct Fastening• Grinding• Hammer Drilling and Chipping


Learn more about the innovations of the TE 6-A36

Learn more about cordless services

INNOVATIONCordless rotary hammer TE 6-A36

The TE 6-A36 is the latest in a long line of advances in rotary technology. Hilti’s unwavering commitment to innovation is rooted in our understanding of what it takes to get the job done. The TE 6-36 has a brushless drive providing outstanding power to weight ratio.

BEYOND THE TOOL

Reduce costs: With our fast and free repairs this premium service comes without a premium price tag. We have easy service access with no receipts necessary and offer the lowest cost of ownership. Increase productivity: Our team of experts are always ready to help work through an issue, offer application advice, or demo a product for your team. Maximize transparency: When you need support know exactly how to access it quickly and who to contact. Looking for a better way to get the job done? We’re here to help.

DB

S •

07/1

7

Hilti, Inc. (US) Legacy Tower, Suite 10007250 Dallas Parkway | Plano, TX 75024 www.facebook.com/HiltiNorthAmerica www.hilti.comCustomer Service: 1-800-879-8000

Hilti (Canada) Corporation2360 Meadowpine Blvd.Mississauga, Ontario, L5N 6S2www.facebook.com/HiltiNorthAmericawww.hilti.caCustomer Service: 1-800-363-4458

Documents

INNOVATION - Amazon S3€¦ · SPX Tuck point blade. Manufactured using a unique method to position and bind the diamond grit on the blade, the SPX Tuck point blade provides superior