W3400V6

4-port ADSL 2+ Wireless Router

Quick Installation Guide

Quick Installation Guide

2

Hardware Installation

See the following figure 1. Connect the Line port of the DSL Router with a

telephone cable.

Connect the LAN port of the DSL Router to the network card of the PC via

an Ethernet cable.

Plug one end of the power adapter to the wall outlet and connect the

otherend to the Power port of the DSL Router.

Figure 1

Quick Installation Guide

3

Logging In to the Router.

Open a Web browser on your computer.

Enter http://192.168.1.1 (default IP address of the DSL router) in the

address bar. The login page appears (Figure 2).

Enter a user name and the password. The default username and

password of the common user are tmuser and tmuser.

Click Login to log in or click Clear to exit the login page.

Figure 2

Quick Installation Guide

4

Quick Setup

Quick setup enables fast and accurate configuration of your Internet connection

and other important parameters.

Choose Quick Setup, the following page appears (Figure 3).

Enter Streamyx ID & Password: username@streamyx

Enable wireless: The default value is enabled.

SSID: For added security, you should change the default SSID to a unique

name.

WEP Encryption: You can select enable or disable it. If you enable the

WEP Encryption, the following page appears. Enter 13 ASCII characters

for the network key.

Channel: The default value is auto, you can select it from the drop-down

list. The valuable value is from 1 to 11.

Save/Apply: Click save/apply button to save the settings.

Figure 3

Quick Installation Guide

5

Diagnostics

Choose Diagnostics and the following page appears (Figure 4). This page is used

to test the connection to your local network, the connection to your DSL service

provider, and the connection to your Internet service provider.

You may diagnose the connection by clicking the Test button or click the Test

With OAM F4 button.

Figure 4