Upload
volien
View
222
Download
0
Embed Size (px)
Citation preview
www.ubssecurities.com
This report has been prepared by UBS Securities Co. Limited. ANALYST CERTIFICATION AND REQUIRED DISCLOSURES BEGIN ON PAGE 45. UBS does and seeks to do business with companies covered in its research reports. As a result, investors should be aware that the firm may have a conflict of interest that could affect the objectivity of this report. Investors should consider this report as only a single factor in making their investment decision.
Global Research 14 February 2014
Initiation of Coverage
China Machinery Engineering Corporation Experienced EPC contractor with overseas focus
China's leading global EPC contractor, with a focus on the power sector China Machinery Engineering Corporation (CMEC) is China’s most experienced overseas engineering, procurement and construction (EPC) contractor. We expect its strong track record in EPC contracts outside China to help it win more projects with higher margins than its Chinese peers. We forecast new contract growth of 16%/11% YoY in 2014/2015 to US$3.9bn/US$4.3bn, partly underpinned by US$11.8bn of contracts signed but not yet in effect as at end-H113, and as it is a beneficiary of China's ’Going Global’ policy. Furthermore, we see potential catalysts from: 1) the completion of an asset injection (that it has agreed to complete before 2016), which could increase our 2015E EPS by 5%; and 2) the announcement of major new contracts (such as a US$2bn+ railway EPC contract in Argentina).
Greatest beneficiary of China's ‘Going Global’ policy The Chinese government is providing more financial support to help developing countries with their infrastructure development under the ‘Going Global’ policy, and is encouraging Chinese contractors to undertake more overseas engineering and construction (E&C) projects. We believe CMEC is the greatest beneficiary of this policy, as it derives around 80% of its total revenue (100% of its E&C revenue) from outside China and has more than 30 years’ experience of EPC contracts overseas.
High margin and asset-light model contribute to premium ROE CMEC delivered industry-leading ROE of 25.2% in 2012, far exceeding its major competitors in China. We think this was due to its significantly better gross margin than competitors and high asset turnover because of its asset-light model. However, CMEC's leverage (net cash position) is low compared with peers, which provides potential for acquisitions or ROE improvement from higher gearing.
Valuation: we initiate coverage with a Buy rating and HK$8.10 price target We base our price target of HK$8.10 on 10.0x 2014E EPS of Rmb0.65. We think its valuation is attractive at 6.8x 2014E PE with a 2013-15E EPS CAGR of 15%, and 5.2% dividend yield in 2014E based on our 35% payout assumption.
Equities
China
Heavy Construction
12-month rating Buy Prior: Not Rated12m price target HK$8.10 Prior: -
Price HK$5.65
RIC: 1829.HK BBG: 1829 HK
Trading data and key metrics 52-wk range HK$7.30-3.70
Market cap. HK$23.3bn/US$3.01bn
Shares o/s 4,126m (ORD)
Free float 20%
Avg. daily volume ('000) 4,253
Avg. daily value (m) HK$25.0
Common s/h equity (12/13E) Rmb11.7bn
P/BV (12/13E) 1.6x
Net debt / EBITDA (12/13E) NM
EPS (UBS, diluted) (Rmb) From To % ch Cons.
12/13E - 0.53 - 0.4912/14E - 0.65 - 0.6412/15E - 0.70 - 0.70
Robin XuAnalyst
+86-213-866 8872
Highlights (Rmbm) 12/10 12/11 12/12 12/13E 12/14E 12/15E 12/16E 12/17ERevenues 19,077 20,518 21,296 21,487 26,855 29,644 32,757 36,121EBIT (UBS) 1,526 2,138 2,041 2,155 2,778 2,987 3,143 3,369Net earnings (UBS) 1,385 1,851 1,918 2,194 2,688 2,895 3,066 3,293EPS (UBS, diluted) (Rmb) 0.42 0.56 0.58 0.53 0.65 0.70 0.74 0.80DPS (Rmb) 0.21 0.11 0.20 0.17 0.23 0.25 0.26 0.28Net (debt) / cash 3,243 4,785 11,801 11,907 11,090 12,193 13,244 14,333
Profitability/valuation 12/10 12/11 12/12 12/13E 12/14E 12/15E 12/16E 12/17EEBIT margin % 8.0 10.4 9.6 10.0 10.3 10.1 9.6 9.3ROIC (EBIT) % 68.0 205.3 <-500 (305.6) 182.6 88.9 73.2 62.9EV/EBITDA (core) x - - - 2.8 2.3 2.1 1.7 1.3P/E (UBS, diluted) x - - - 8.3 6.8 6.3 5.9 5.5Equity FCF (UBS) yield % - - - 2.3 (0.2) 11.7 11.8 12.4Net dividend yield % - - - 3.8 5.2 5.6 5.9 6.3Source: Company accounts, Thomson Reuters, UBS estimates. Metrics marked as (UBS) have had analyst adjustments applied. Valuations: based on an average share price that year, (E): based on a share price of HK$5.65 on 13 Feb 2014 22:41 HKT
Robin Xu, Analyst, S1460511010012, [email protected], +86-213-866 8872
Initiation of Coverage: China Machinery Engineering Corporation 14 February 2014 2
Investment Thesis 12-month rating Buy
CMEC 12m price target HK$8.10
Investment case
We like CMEC for the following reasons: 1) we think it is the greatest beneficiary of China's ‘Going Global’ policy, as it has a successful track record on overseas EPC contracts (especially power); 2) it delivers industry-leading ROE, due to better profitability and an asset-light model; 3) its working capital management is strong, in our view; and 4) a potentially EPS-accretive asset injection from the parent company, as per its IPO prospectus.
Upside scenario
In our upside scenario, we assume revenue grows 35% YoY and that the gross margin expands 80bp in 2014 compared with our current estimates of 25% YoY revenue growth and a 22bp gross margin expansion in 2014. This reflects CMEC taking more market share of international power projects and would increase our valuation to HK$9.10/share.
Downside scenario
In our downside scenario, we assume no revenue growth YoY and that the gross margin deteriorates 50bp YoY in 2014. This reflects CMEC taking less market share of high-margin international power projects and would increase our valuation to HK$6.50/share.
Upcoming catalysts
Announcements on newly effective contracts or the signing of initial MOUs (especially for mega projects) would be one major catalyst. The completion of the agreed asset injection is another major catalyst.
Business description
China Machinery Engineering Corporation (CMEC) is a leading company in the international contracting market, particularly in the international electric power & energy field. CMEC has extended its business to more than 150 countries and territories in the fields of international contracting and general international trade. It operates 26 affiliates in China, 13 affiliates overseas and 26 foreign representative offices.
Industry outlook
We expect strong demand for infrastructure construction globally and that Chinese contractors will have bigger exposure. We attribute this to China’s ‘Going Global’ policy, which encourages Chinese contractors to take more overseas construction projects, some with funding from Chinese banks.
Revenue by region (%)
Source: Company data
Gross profit by product segment
2011 2012 2013E 2014E 2015E
Construction contracts 2,916 2,772 3,198 4,095 4,418
Trading 436 582 312 399 436
Others 308 378 342 383 440
Total 3,659 3,732 3,852 4,877 5,295
Source: Company data, UBS estimates
China11%
Overseas89%
Initiation of Coverage: China Machinery Engineering Corporation 14 February 2014 3
Contents
Investment summary ....................................................................... 4
Risks ............................................................................................................ 5
Valuation and basis for our price target ....................................................... 6
UBS versus consensus .................................................................................. 6
Sensitivity analysis ........................................................................................ 7
Risk analysis ...................................................................................... 8
Industry risks ................................................................................................ 8
Company specific risks ............................................................................... 10
Competitive analysis ...................................................................... 14
Assessment of industry attractiveness ........................................................ 14
Competitive strengths ................................................................................ 19
Management strategy ................................................................................ 24
Financials ........................................................................................ 26
Profit and loss ............................................................................................ 26
Balance sheet............................................................................................. 29
Cash flow .................................................................................................. 30
Return on capital ....................................................................................... 31
Valuation ........................................................................................ 32
Price target derivation ................................................................................ 32
Comparables ............................................................................................. 33
Appendix ........................................................................................ 35
Company background ............................................................................... 35
Projects ...................................................................................................... 36
Regulatory ................................................................................................. 39
Robin XuAnalyst
+86-213-866 8872
Initiation of Coverage: China Machinery Engineering Corporation 14 February 2014 4
Investment summary We initiate coverage of China Machinery Engineering Corporation (CMEC) with a Buy rating and HK$8.10 price target. CMEC is the most experienced Chinese overseas EPC contractor and we expect its good track record abroad to help it win more projects with higher margins than its Chinese peers. We forecast 16%/11% new contract growth YoY in 2014/2015 to US$3.9/US$4.3bn, partly underpinned by US$11.8bn of contracts signed but not yet in effect as at end-H113, and partly as it is a beneficiary of China's ‘Going Global’ policy. Furthermore, we see potential catalysts from: 1) the completion of an asset injection (that its IPO prospectus stated would be completed before 2016), which would increase our 2015E EPS by 5%; and 2) the announcement of major new contracts (such as a US$2bn+ railway EPC contract in Argentina).
Benefitting from China's ‘Going Global’ policy. We see CMEC as the greatest beneficiary of China’s ‘Going Global’ policy, as the government encourages more overseas E&C projects, some with funding support from Chinese banks. Around 80% of CMEC’s revenue (100% of its E&C revenue) comes from overseas, and it has more than 34 years’ experience of overseas EPC contract work.
High margin and asset-light model contributes to premium ROE. CMEC delivered industry leading ROE of 25.2% in 2012, far exceeding its major competitors in China. We attribute this to CMEC’s significantly better gross margin than competitors, and its asset turnover has also been high due to its asset-light model. However, CMEC's leverage (net cash position) is low compared with peers, providing potential for acquisitions or ROE improvement from higher gearing.
Strong working capital management. Unlike most Chinese contractors that have experienced rising receivables problems in China, CMEC maintains significant advance receipts as a result of aggressively using export buyer’s credit. CMEC's advance receipts amounted to Rmb9.1bn as at 30 June 2013, 21% of its backlog on that date. The Chinese government is providing increasing financial support to help developing countries’ infrastructure development under the ‘Going Global’ policy and ‘Supporting Developing Countries’ policy.
Potential EPS accretion from asset injection. CMEC has agreed to acquire a number of assets from its parent company before 2016 (China National Electric Engineering Co. [CNEEC], China National Complete Engineering Corporation [CMCEC] and China National Automation Control System Corporation [CACS]). We believe the CNEEC and CMCEC acquisitions are likely to be completed by end-2014, which would enhance 2015E EPS by 5% (assuming 5.0% funding cost). The parent company also has some other assets, both listed and non-listed, that could be potential acquisition candidates.
Attractive valuation. We believe CMEC’s valuation is attractive at 6.8x PE in 2014E on an estimated EPS CAGR of 15% in 2013-15, and that there is potential EPS accretion if CMEC completes its promised asset injection by end-2014 or early 2015. We see little downside as net cash represents around 103% of current market cap, and CMEC is trading at a 2014E dividend yield of 5.2%.
Initiate with a Buy with price target of HK$8.10
Proven track record working outside China
Initiation of Coverage: China Machinery Engineering Corporation 14 February 2014 5
Risks Uncertainty on global economic recovery. International engineering contracting business is highly correlated with the world economy. An economic slowdown will negatively affect the market size of international engineering contracting business. The top 225 international contractors’ revenue from international engineering contracting business was flat in 2008-10, consistent with the global economic recession in 2009 (world GDP growth was -1% in 2009).
Potential slowdown of public infrastructure investment. International engineering contracting business also depends on the level of public infrastructure spending by relevant governments or governmental agencies in various countries. In other words, a lack of funding from developing countries' governments may slow infrastructure spending.
Renminbi appreciation. International engineering contracts are normally signed in either US dollars or local currency (similarly for revenue recognition), while some of the Chinese contractors’ costs may be incurred in Renminbi (such as equipment and labour). As a result, Chinese contractors may incur forex losses if the Renminbi appreciates against the US dollar or the local currency where a project is located. Furthermore, Renminbi appreciation may reduce the competitiveness of Chinese contractors’ trading business against non-Chinese competitors.
Other risks regarding overseas contracts. International engineering contracting involves dealing with different nations and different project owners, and tends to be much more complicated than similar construction work that most Chinese contractors carry out in China. Furthermore, regulatory, social and political conditions may all affect the ultimate profit margins for international engineering contracting.
Competition from Chinese peers. In the power sector, CMEC faces competition from major Chinese international engineering contractors such as Sinohydro, Shandong Electric Power Construction Corporation III (SEPCOIII), Shanghai Electric and Shandong Electric Power Construction Corporation (SEPCO). In addition, major Chinese transportation infrastructure contractors—including China Communications Construction (CCCC), China Railway Construction (CRCC) and China Railway Group (CRG)—also plan to expand their business overseas.
Competition with China CAMC Engineering (CAMCE). CMEC entered into a non-competition agreement with China National Machinery Industry Corporation (SINOMACH, the parent company that holds a 77.99% stake in CMEC) to the effect that other subsidiaries (excluding CAMCE) of SINOMACH will not compete with CMEC in respect of the core sectors (power, transport and telecommunication). However, this leaves the door open for SINOMACH's 61.22%-owned CAMCE to compete with CMEC in the future.
Concentration of customers and suppliers. CMEC’s main customers are primarily the project owners of its engineering contracting projects for international engineering contracting business. In 2009/2010/2011/2012, its five largest customers in aggregate accounted for 42.3%/34.0%/36.1%/28.0% of its total revenue. Purchases from CMEC’s five largest suppliers (which include subcontractors) accounted for 13.2%/13.0%/13.8%/13.8% of its cost of sales in 2009/2010/2011/2012.
Infrastructure spending relies on a healthy economy
Rmb appreciation may incur forex loss
Competition is more with Chinese peers
CAMCE is a major competitor under the same parent company
Initiation of Coverage: China Machinery Engineering Corporation 14 February 2014 6
Valuation and basis for our price target We derive our 12-month price target of HK$8.10 by applying PE multiples on 2014E EPS. Our target 2014E PE multiple of 10.0x is at a slight discount to listed Korean E&C companies, and at a 33% premium to CMEC's historical average forward PE multiple. Our price target implies 1.9x P/BV (on 21% ROE), and a 3.6% dividend yield in 2014E.
Figure 1: Price target derivation
EPS
2014E EPS (Rmb) 0.65
EPS CAGR (2013-15E) 15%
PE (x)
Target 2014 PE (x) 10.0
Historical PE avg. (x) 7.5
Premium/(discount) 33%
Korean E&C (PT implied) 10.7
Premium/(discount) -7%
Rating/PT
Price target (HK$) 8.10
Current price (HK$) 5.65
Upside/(downside) 43%
Rating Buy
Other financials
New contract CAGR (2013-15E) 13.6%
Net margin 2014E 10.0%
Net gearing 2014E -132%
ROE 2014E 21.3%
Source: UBS estimates
UBS versus consensus Our 2013 reported net profit estimate is 6% below consensus reflecting our lower margin assumptions. However, our reported net profit estimate for 2014 is 1% higher than consensus. According to Bloomberg, CMEC has six Buy ratings and no Neutral or Sell ratings.
Figure 2: UBS estimates versus consensus
2013 2014
(Rmb m) UBS Low High Average Diff UBS Low High Average Diff
Revenue 21,487 20,438 22,166 21,474 0% 26,835 23,152 29,713 26,522 1%
EBIT 2,155 2,304 2,591 2,440 -12% 2,772 2,491 3,373 3,019 -8%
Net profit 1,950 2,062 2,084 2,073 -6% 2,695 2,644 2,707 2,676 1%
Source: Bloomberg, UBS estimates
Initiate with a Buy rating and price target of HK$8.10
Slightly lower than consensus for 2013, but higher in 2014 and 2015
Initiation of Coverage: China Machinery Engineering Corporation 14 February 2014 7
Sensitivity analysis According to our sensitivity analysis, revenue growth rates and changes in the gross margin will have the biggest impact on CMEC’s earnings. Our analysis suggests a 5% change in the revenue growth rate would affect earnings by 5.4%, while a 1ppt change in the gross margin would affect earnings by 7.5%, everything else being equal.
Figure 3: Sensitivity analysis on 2014E EPS
Revenue growth
10% 15% 20% 25% 30% 35% 40%
Gro
ss m
argi
n
16.1% -29% -25% -20% -15% -10% -5% 0%
16.6% -26% -21% -16% -11% -6% -1% 4%
17.1% -23% -18% -13% -7% -2% 3% 8%
17.6% -20% -14% -9% -4% 2% 7% 12%
18.1% -16% -11% -5% 0% 5% 11% 16%
18.6% -13% -7% -2% 4% 9% 15% 20%
19.1% -10% -4% 2% 7% 13% 19% 25%
19.6% -6% -1% 5% 11% 17% 23% 29%
20.1% -3% 3% 9% 15% 21% 27% 33%
Source: UBS estimates
Sensitivity on revenue and gross margin
Initiation of Coverage: China Machinery Engineering Corporation 14 February 2014 8
Risk analysis
Industry risks
Uncertainty on global economic recovery
International engineering contracting business is highly correlated with the world economy. According to Engineering News-Record magazine (ENR), the international engineering contracting business revenue of the top 225 international contractors was flat during 2008-10, which is consistent with the global recession in 2009 (world GDP growth was -1% in 2009). The UBS global economics team forecasts global GDP growth to accelerate to 3.3%/3.4% in 2014/2015 from an estimated 2.4% in 2013E, of which developing economies’ GDP growth is expected to be 4.9%/4.8%.
Figure 4: World GDP versus developing economies Figure 5: Total international revenue of the top 225 international contractors
Source: International Monetary Fund, UBS estimates Source: ENR
Potential slowdown of public infrastructure investment
International engineering contracting business also depends on the level of public infrastructure spending by relevant governments or governmental agencies in various countries.
Figure 6: Global fixed asset investment value and infrastructure engineering investment value
Source: World Bank
3.4%
4.5% 4.2%4.8% 4.7%
1.9%
-1.0%
4.3%3.2%
2.7% 2.4%3.3% 3.4%
5.1%
6.5% 6.3%7.2% 7.6%
4.4%
2.4%
6.3%5.4%
4.5% 4.2%4.9% 4.8%
-2%-1%0%1%2%3%4%5%6%7%8%9%
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
E
2014
E
2015
E
World Developing Economies
-5%
0%
5%
10%
15%
20%
25%
30%
35%
40%
45%
0
100
200
300
400
500
600
2003 2004 2005 2006 2007 2008 2009 2010 2011 2012
International revenue YoY
US$ bn
0
2,000
4,000
6,000
8,000
10,000
12,000
14,000
16,000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
F
2012
F
2013
F
2014
F
2015
F
Global Infrastructure Engineering Investment Global Gross Fixed Asset Formation
US$ bn
Global economy to accelerate in 2014E
Government budgets to spend on infrastructure
Initiation of Coverage: China Machinery Engineering Corporation 14 February 2014 9
Renminbi appreciation
International engineering contracts are normally signed in either US dollars or local currency (similarly for revenue recognition), while some of the costs for Chinese contractors may be incurred in Renminbi (such as equipment and labour). As a result, Chinese contractors may incur forex losses if the Renminbi appreciates against the US dollar or the local currency where a project is located. Furthermore, Renminbi appreciation may reduce the competitiveness of Chinese contractors' trading business versus non-Chinese competitors. UBS China Economist Tao Wang expects a US$:Rmb exchange rate of 6.10/6.10 by the end of 2014/2015. CMEC incurred Rmb332/Rmb505m forex losses in 2010/2011 when the Renminbi appreciated 3.3%/5.0% against the US dollar.
Figure 8: CMEC's forex net loss versus Rmb appreciation Figure 9: CMEC's revenue breakdown by currency
Source: Company data, Bloomberg Source: Company data
Other risks regarding overseas contracts
International engineering contracting involves dealing with different countries and different project owners, and tends to be much more complicated than similar construction work that most Chinese contractors carry out in China. Furthermore, unstable economic, regulatory, social and political conditions may all affect ultimate profit margins for international engineering contracting. There have been several examples of unsuccessful attempts by Chinese contractors in the international engineering market, including CRCC in Saudi Arabia, CRG in Poland and Longking in India.
Figure 10: Past failures overseas by Chinese contractors
Company Time Country Loss
CRCC 2010 Saudi Arabia Rmb4.148bn
CRG 2011 Poland Rmb632m
Longking India NA Source: Company data
25
332
505
264 0.0%
3.3%
5.0%
1.0%1.5%
0.0%
1.0%
2.0%
3.0%
4.0%
5.0%
6.0%
-
100
200
300
400
500
600
2009 2010 2011 2012 H113
Foreign exchange net loss Rmb/USD appreciation
Rmb mRmb m
82%74% 73% 79%
11%17% 20% 15%
4% 8% 5% 5%2% 1% 1% 1%
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
2009 2010 2011 H112
USD Rmb Euro Others
Figure 7: Rmb versus US$
Source: Bloomberg, UBS estimates
8.07
7.80
7.30
6.83
6.83
6.61
6.30
6.23
6.05 6.10
6.10
6.0
6.5
7.0
7.5
8.0
8.5
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
E
2015
E
US$:Rmb
Overseas EPC
Weather/seasonality
Transportation Environmental issues
Legal issues
Initiation of Coverage: China Machinery Engineering Corporation 14 February 2014 10
Company specific risks
Competition from other Chinese peers
One of the major concerns of investors on China's ‘Going Global’ policy is that it will lead to more competition among Chinese contractors and squeeze profits for all market participants, similar to the experience of Korean E&C companies. CMEC faces competition from major Chinese international engineering contractors in the power sector such as Sinohydro, Shandong Electric Power Construction Corporation III (SEPCOIII), Shanghai Electric and Shandong Electric Power Construction Corporation (SEPCO). In addition, major Chinese transportation infrastructure contractors (including CCCC, CRCC and CRG) also plan to expand their business overseas. However, we believe CMEC's superior track record will provide it with an advantage when bidding for projects supported by the Chinese government.
Figure 11: Overseas revenue comparison in 2012 Figure 12: International power sector engineering revenue 2007-12
Note: Harbin = Harbin Electric, Dongfang = Dongfang Electric, Shanghai = Shanghai Electric. Source: Company data
Source: Company data
Major Chinese competitors in the overseas power sector include Sinohydro, SEPCOIII, Shanghai Electric and SEPCO.
Figure 13: Top Chinese international engineering contractors in the power sector (by revenue from international power projects in US$ m)
Company 2012 2007-12
Sinohydro 2,737 10,473
CMEC 1,592 8,089
SEPCOIII 2,119 7,668
Shanghai Electric 1,632 5,680
SEPCO 1,427 5,227
Source: Company data, ENR
0
5,000
10,000
15,000
20,000
25,000
30,000
35,000
40,000
45,000
CMEC
CRCC CR
G
CCCC
Harb
in
Dong
fang
Shan
ghai
Sino
hydr
o
CAM
CE
Rmb m
10,473
8,089 7,6685,680 5,227
0
2,000
4,000
6,000
8,000
10,000
12,000
Sinohydro CMEC SEPCOIII SEPCO
US$ m
There are a few Chinese contractors to compete with
Initiation of Coverage: China Machinery Engineering Corporation 14 February 2014 11
Competition with CAMCE
CMEC entered into a non-competition agreement with SINOMACH (the parent company, which holds a 77.99% stake in CMEC) to the effect that other subsidiaries of SINOMACH (excluding CAMCE) will not compete with CMEC in respect of the core sectors (power, transport and telecommunication). This leaves the door open for SINOMACH's 61.22%-owned CAMCE to compete with CMEC in the future. However, we are not concerned, as SINOMACH has made it clear that CMEC will be its flagship overseas platform and we expect more resources to be allocated to CMEC in the future.
Figure 14: New contract comparison of CMEC and CAMCE Figure 15: Revenue comparison of CMEC and CAMCE in 2012
Source: Company data Source: Company data
CMEC has a relatively more diversified geographical exposure than CAMCE, with a focus on Asia and Africa, while CAMCE is more concentrated in Asia and South America.
Figure 16: CMEC’s revenue breakdown by region Figure 17: CAMCE’s revenue breakdown by region
Source: Company data Source: Company data
In terms of business segments, CMEC focuses on the power segment, with additional exposure in transportation and telecommunications. CAMCE focuses on the agriculture and industrial engineering segments, with exposure in water, power and transportation.
0
500
1,000
1,500
2,000
2,500
3,000
3,500
4,000
4,500
5,000
2009 2010 2011 2012
CMEC CAMCE
US$ m
0
5,000
10,000
15,000
20,000
25,000
CMEC CAMCE CMEC CAMCE CMEC CAMCE CMEC CAMCE
2009 2010 2011 2012
Construction contracts Trading Others
Rmb m
0%
20%
40%
60%
80%
100%
2009 2010 2011
Asia
Africa
Europe
NorthAmerica
SouthAmerica
Oceania
Unlocate 0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
2009 2010 2011
Asia
Africa
Europe
SouthAmerica
Oceania
CAMCE may compete with CMEC, but CMEC is SINOMACH's flagship overseas platform
CMEC is more diversified in terms of regions than CAMCE
CMEC focuses on power; CAMCE focuses on industrial and agriculture
Initiation of Coverage: China Machinery Engineering Corporation 14 February 2014 12
Figure 18: CMEC’s construction contracts revenue breakdown
Source: Company data
CMEC delivered much higher gross margins (especially in the construction segment) than CAMCE in recent years.
Figure 19: Gross margin comparison of CMEC and CAMCE
Source: Company data
CMEC's ROE has been much higher than CAMCE’s, while both have been in a net cash position over the past four years.
Figure 20: ROE comparison of CMEC and CAMCE Figure 21: Net gearing comparison of CMEC and CAMCE
Source: Company data Source: Company data
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
2009 2010 2011 2012Power Transportation Telecommunications Non-core sectors
0%
5%
10%
15%
20%
25%
30%
2009 2010 2011 2012 2009 2010 2011 2012 2009 2010 2011 2012
Overall Construction contracts Trading
CMEC CAMCE
15%
20%
25%
30%
35%
2009 2010 2011 2012
CMEC CAMCE
-300%
-250%
-200%
-150%
-100%
-50%
0%
2009 2010 2011 2012
CMEC CAMCE
CMEC has higher gross margins
CMEC has higher ROE
Initiation of Coverage: China Machinery Engineering Corporation 14 February 2014 13
Concentration of customers and suppliers
CMEC’s main customers for international engineering contracting business are primarily the project owners of its engineering contracting projects. In 2009/2010/2011/2012, its five largest customers in aggregate accounted for 42.3%/34.0%/36.1%/28.0% of its total revenue and its largest customer accounted for 10.1-12.2% of its total revenue in 2009-12. In the same period, purchases from CMEC’s five largest suppliers (which include subcontractors) accounted for 13.2%/13.0%/13.8%/13.8% of its cost of sales. CMEC's largest supplier accounted for approximately 3.3-4.2% of its cost of sales in 2009-12.
Figure 22: Concentration of customers: top 5 customers’ share
Figure 23: Concentration of suppliers: top 5 suppliers’ share
Source: Company data Source: Company data
0%
10%
20%
30%
40%
50%
60%
70%
2009 2010 2011 2012
CMEC CAMCE Sinohydro
0%
5%
10%
15%
20%
25%
30%
35%
2009 2010 2011 2012
CMEC CAMCE Sinohydro
Five largest customers account for 28% of total revenue in 2012
Initiation of Coverage: China Machinery Engineering Corporation 14 February 2014 14
Competitive analysis
Assessment of industry attractiveness
Solid growth in infrastructure engineering investment in developing countries
The growth rate of infrastructure engineering investment has been higher in developing countries, where CMEC principally operates its business. According to the World Bank, infrastructure engineering investment value in developing countries delivered a CAGR of 10.6%, growing from US$1,214bn in 2001 to US$3,016bn in 2010 while developed countries showed a CAGR of -4.5%. Due to the relatively strong economic growth rate, urbanisation and industrialisation, the World Bank estimates that infrastructure engineering investment in developing countries will continue to increase, at a CAGR of 9.6% from 2010 to US$4,766bn in 2015. In developing countries, power related, transportation and telecommunication infrastructure accounted for over 70% of total infrastructure investment.
Figure 24: Infrastructure engineering investment value and annual growth rate
Figure 25: Infrastructure engineering investment in developing countries, broken down by type
Source: World Bank Source: Ipsos
According to ENR, the total new contract value of infrastructure engineering projects was approximately US$881bn/US$826bn in global markets/developing countries, implying a CAGR of 6.3%/7.5% in 2006-12. Among the various types of projects, power, transportation and telecommunications infrastructure contracts together represented 76% of total new contract value in developing countries in 2012. Power infrastructure has been the main engine of growth as its new contract value increased from US$72bn in 2006 to US$276 in 2012 translating to a CAGR of 25%. Chinese contractors signed new contracts of US$157bn overseas in 2012, among which power/transportation/telecommunications accounted for 14%/23%/11%.
-40%
-30%
-20%
-10%
0%
10%
20%
30%
40%
0
1,000
2,000
3,000
4,000
5,000
6,000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
F
2012
F
2013
F
2014
F
2015
F
Developing countries Developed countriesYoY in developing countries Global YoY
US$ bn
247 263 304 275 421 505 507 437 459 402 512 608 748 9071,057598
443
514
593 78
5 1,08
4
1,20
0
1,18
9
1,41
3
1,58
7
1,67
3
1,75
0
1,82
6
1,86
7
1,86
7
77 66 50 133 13
2
160 157
146 13
8 122 19
8 239 21
8 180 30
0
0
500
1,000
1,500
2,000
2,500
3,000
3,500
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
E
2012
E
2013
E
2014
E
2015
E
Power-related infrastructure Transportation infrastructureTelecommunication infrastructure
US$ bn
Fast growing infrastructure spending by developing countries
Power, transportation and telecommunication are the major infrastructure spending overseas
Initiation of Coverage: China Machinery Engineering Corporation 14 February 2014 15
Figure 26: New contract value of infrastructure engineering projects in developing countries breakdown
Figure 27: 2012 new contract value of Chinese contractors in the global market breakdown
Source: Ipsos Source: Ministry of Commerce, China International Contractors Association
Strong demand for power infrastructure in developing countries
We expect a rapid growth period for power related infrastructure in developing countries in coming years for the following reasons: 1) most are experiencing industrialisation and urbanisation, which are two key drivers for electricity consumption growth; and 2) their power infrastructure development is far behind that of developed countries. According to Enerdata, the electricity consumption CAGRs in Asia/the Middle-East/Africa were 7.5%/6.3%/4.4% in 2001-12 while the global growth rate was 3.5%.
Figure 28: Developing countries industrial activity growth Figure 29: Global electricity consumption breakdown
Source: World Bank, UBS estimates Note: CIS= Commonwealth of Independent States. Source: Enerdata
A significant number of countries (especially in Sub-Saharan Africa, South Asia and Southeast Asia) have per capital electricity consumption and production levels well below China’s. For example, India’s electricity production per capita was 720KWH in 2012, which was one fifth of China’s 3,685KWH.
72171 144 167 204 239 276
205142 137
215212 208
21962
63 63
6682
114134
197 152 213
217221
220197
0
100
200
300
400
500
600
700
800
900
2006 2007 2008 2009 2010 2011 2012Power-related Transportation Telecommunication Others
US$ bnPowerUS$21bn14%
Housing constructionUS$32bn20%
TransportationUS$36bn23%
PetrochemicalUS$17bn11%
TelecommunicationsUS$18bn11%
Water and sewageUS$7bn5%
OthersUS$25bn16%
-8%
-4%
0%
4%
8%
12%
16%
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
E
2014
E
2015
E
Asia (ex. Japan) Latin America
0
5,000
10,000
15,000
20,000
2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012
Asia North America Europe CISLatinn America Middle-East Africa Pacific
TWh
Rapid growth of power infrastructure needs
Initiation of Coverage: China Machinery Engineering Corporation 14 February 2014 16
Figure 30: China GDP versus power capacity growth Figure 31: Electricity production per capita in 2012
Source: CEIC, UBS estimates Note: ME&NA= Middle East & North Africa, S Africa= Sub-Saharan Africa; Middle East and North Africa and Sub-Saharan Africa data in 2011, others in 2012. Source: World Bank, U.S. Energy Information Administration
According to the Secretariat for Infrastructure of India, India estimated investment of US$514bn/US$1trn during its 11th (2007-12)/12th (2012-17) Five Year Plans to revamp infrastructure. The Asian Development Bank (ADB) estimates Asia’s overall national infrastructure investment needs to be US$8trn over the 2010-20 period (including China’s US$4.4trn), of the total, it estimates Pakistan/Bangladesh/Kazakhstan needs US$179bn/US$145bn/US$70bn. ASEAN nations are estimated to need about US$583.1bn of infrastructure investment by 2020.
Figure 32: 2012- 20F new capacity addition breakdown Figure 33: 2012-20E new capacity addition in Asia
Source: US Energy Information Administration Source: CEIC, UBS estimates
Chinese government helping Chinese contractors
The Chinese government provides policy and financial support to encourage Chinese contractors to seek opportunities in overseas markets, especially in developing countries in Asia, Africa and Latin America. According to the Ministry of Commerce, the revenue of contracted projects overseas rose from US$11.2bn in 2002 to US$137.1bn in 2013, representing a CAGR of 26%, whereas the value of new contracts increased at a 25% CAGR during the same period.
-20%
-15%
-10%
-5%
0%
5%
10%
15%
20%
25%
30%
1991
1992
1993
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
GDP growth Capacity growth
0
2,000
4,000
6,000
8,000
10,000
12,000
14,000
USA
Japa
n
Euro
pe
Chin
a
ME&
NA
Latin
Am
erica
Sout
h As
ia
S Af
rica
kWH
0
100
200
300
400
500
600
700
Asia
-Pac
ific
Euro
pe
Sout
h Am
erica
Mid
dle
East
Afric
a
Nor
th A
mer
ica
GW
0
20
40
60
80
100
120
Indi
a
Viet
nam
Indo
nesia
Turk
ey
Thai
land
Mal
aysia
Phill
ipin
es
GW
Potential demand for power is significant
Chinese companies have already expanded overseas
Initiation of Coverage: China Machinery Engineering Corporation 14 February 2014 17
Figure 34: Chinese contractors’ revenue and new contract value from overseas
Source: Ministry of Commerce
Figure 35: Milestones in ‘Going Global’ policy
Regulation / Event Effective date Authority Comment Circular on Approval Authority and Procedure for Establishing Non-trade Joint Ventures Overseas
1st May 1984 MOFTEC A transition from case approval to normative approvals
Provisions Governing Control and Approval Procedures for Opening Non-Trade Enterprises Overseas
1st Feb. 1985 MOFTEC For the first time included all economic entities in official overseas investment provision, as opposed to merely trading companies
Established The Export-Import Bank of China and China Development Bank
1994 Governed by State of Council To provide credit for Chinese companies facilitating their overseas contracting projects and investments
Set up four Industrial investment funds with foreign institutions
From 1998 CDB To provide funding sources and platform
The Tenth Five-Year Plan for National Economic and Social Development of the People's Republic China
15th Mar. 2000 National People's Congress ’Going Global’ strategy explicitly proposed and officially recorded
Established China Export and Credit Insurance Corporation
18th Dec. 2001 Governed by SASAC To offer insurance coverage and export financing for outward foreign investments
Circular on Settling Profit Deposit for Overseas Investments
15th Nov. 2002 SAFE Cancelled the requirement to set aside 5% of the investment as profit wire back guarantee
Circular of the State Administration of Foreign Exchange on the Transitional Policy and Measures
1st Apr. 2003 SAFE Cancelled foreign exchange risk review on domestic institution investments, and simplified source review on foreign investments
Notice of Providing Credit Supports to the Key Overseas Investment Projects Encouraged by the State
27th Oct. 2004 SDRC, The Export-Import Bank of China
Provided discount interest rate for outward foreign investment loan
Circular on the Revision of Certain Foreign Exchange Control Policies Relating to Overseas Investment
1st Jul. 2006 SAFE Removed limitation on currency purchase for outward foreign investments
Several opinions on Encouraging and Guiding Outward Foreign Investment of Non-State-Owned Companies
10th May 2007 MOF, MOC, ACFIC, The People's Bank of China
Encouraging the provision of special funds or loan discount for outward investment projects of non-state-owned companies
Administrative Regulations on Contracting Foreign Projects
1st Sep. 2008 State of Council Indicated the project contracting entities should have the status of a legal person and special grade or grade A qualification certificate
Provisions on the Foreign Exchange Administration of the Overseas Direct Investment of Domestic Institutions
1st Aug. 2009 SAFE Substituted the review policy on the capital source of outward investment with materials recording and registration policy
Established China (Shanghai) Pilot Free Trade Zone 29th Sep. 2013 Approved by State of Council Simplified the outward foreign investment registration procedure for companies within the FTZ
China proposed to set up the Asian Infrastructure Investment Bank
2nd Oct. 2013 President Xi Jinping proposed at a meeting with Indonesian president, Susilo Bambang Yudhoyono
To cooperate with the multilateral development banks to facilitate the development for Asian countries
Notes: MOFTEC = Ministry of Foreign Trade and Economic Cooperation of China, CDB = China Development Bank, SASAC = State-owned Assets Supervision and Administration Commission, SAFE = State Administration of Foreign Exchange, SDRC = National Development and Reform Commission, ACFIC = All-China Federation of Industry and Commerce; Source: Ministry of Commerce, UBS
0%
20%
40%
60%
80%
100%
120%
140%
020406080
100120140160180200
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
Revenue New contract Revenue YoY New contract YoY
US$ bn
Initiation of Coverage: China Machinery Engineering Corporation 14 February 2014 18
The Chinese government is providing increasing financial support to help developing countries with their infrastructure development under the ‘Going Global’ policy and ‘Supporting Developing Countries’ policy. Export-Import Bank of China and China Export & Credit Insurance Corporation are two major parties providing funding for overseas infrastructure construction projects.
Figure 36: Export credit amount from the Export-Import Bank of China
Figure 37: Guarantee amount from the Export-Import Bank of China
Source: Export-Import Bank of China Source: Export-Import Bank of China
Based on Ministry of Commerce statistics and ENR, in 2012, Chinese contractors generated revenue of US$116.6bn in the international infrastructure engineering market, of which 46% came from Asia Pacific and 35% came from Africa. CMEC ranked eighth in terms of revenue derived from overseas.
Figure 38: Chinese contractors 2012 overseas revenue by region
Figure 39: Top Chinese international engineering contractors in the global market in 2012
Company
Revenue from overseas
(US$ m)
China Communications Construction Group 11,187
Sinohydro Corporation 5,473
China State Construction Engineering Corporation 4,988
China Railway Group Ltd. 3,800
CITIC Construction Co., Ltd. 2,636
China Metallurgical Group Corporation 2,296
China Railway Construction Corporation 2,147
CMEC 2,126
SEPCO III 2,099
Gezhouba Group 2,009
Others 77,840
Total 116,600 Source: Ministry of Commerce, China International Contractors Association Source: ENR, company data
1,0281,239 1,300
1,7311,442
1,695 1,754149
174 183
295
326
439 425
0
500
1,000
1,500
2,000
2,500
2006 2007 2008 2009 2010 2011 2012
Export Sellers Export Buyers
US$ bn
8067
102 10287
0
20
40
60
80
100
120
2008 2009 2010 2011 2012Guarantee services
US$ bn
AsiaUS$54bn46%Africa
US$41bn35%
Latin AmericaUS$11bn10%
EuropeUS$7bn6%
North AmericaUS$1bn1%
OceaniaUS$2bn2%
Financial support by Chinese government
Chinese contractors engaged mainly in Asia and Africa
Initiation of Coverage: China Machinery Engineering Corporation 14 February 2014 19
Competitive strengths CMEC is a leading international engineering contractor, with particular expertise in the power-related infrastructure sector. Its main competitive advantage is premium ROE, a strong cash position, an extensive global network, an experienced team and a rich contract backlog.
High margin & asset-light model contribute to high ROE
CMEC delivered an industry-leading ROE of 25.2% in 2012, far exceeding its major competitors in China. We attribute this to CMEC’s better profitability and asset-light model, which has resulted in leading asset turnover. CMEC's leverage is also low compared with peers, which leaves room for acquisitions or ROE improvement from higher gearing.
Figure 40: ROE decomposition in 2012
Source: Company data
CMEC’s gross margin is significantly better than its competitors, which we attribute to its strong presence in the power segment, where the gross margin was 21-27% in 2010-12. The major reasons for its strength in this segment are better pricing and lower costs.
ROE
Net margin Asset turnover Leverage
25.2%
12.5%14.9% 14.1%
18.8%
9.1%
0%
5%
10%
15%
20%
25%
30%
CMEC Harbin Electirc Dongfang ElectricSinohydro CAMCE Shanghai Electric
9.1%
5.4%5.8%
3.3%
6.3%
3.5%
0%
1%
2%
3%
4%
5%
6%
7%
8%
9%
10%
CMEC Harbin Electirc Dongfang ElectricSinohydro CAMCE Shanghai Electric
0.69
0.50 0.47
0.72 0.70 0.67
0.0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
CMEC Harbin Electirc Dongfang ElectricSinohydro CAMCE Shanghai Electric
4.01
4.68
5.45 5.92
4.31 3.82
0.0
1.0
2.0
3.0
4.0
5.0
6.0
7.0
CMEC Harbin Electirc Dongfang ElectricSinohydro CAMCE Shanghai Electric
Premium ROE over peers
Highest gross margin among peers
Initiation of Coverage: China Machinery Engineering Corporation 14 February 2014 20
Figure 41: Comparison of overseas construction contracts gross margins
Note: CMEC and Harbin Electric’s gross profit = net revenue – COGS, i.e. net of business tax; Sinohydro, CAMCE, Dongfang Electric and Shanghai Electric’s gross profit = gross revenue – COGS, i.e. before business tax; Source: Company data
From the perspective of project bidding, CMEC has three major bidding processes: tender negotiation; tender invitation; and public bid invitation. CMEC favours tender negotiation which offers higher pricing. The concentration of suppliers for CMEC is relatively low; its top five suppliers accounted for around 13% of corresponding cost of sales during 2009-12, while its largest supplier only accounted for 4% of the total. As a result, CMEC has strong bargaining power over Chinese suppliers to help lower its own costs.
Figure 42: Comparison of three bidding processes
Type Competition Process Terms and conditions as % of track record
Tender negotiation Non-public invitation, no competition one-on-one Based on private negotiations 73.6
Tender invitation Targeted invitations to a defined group of contractors bid on price predetermined 16.0
Public bid invitation Open to public bidding by all contractors bid on price predetermined 10.4 Source: Company data
Strong working capital management
Unlike most Chinese contractors who have experienced rising receivable problems in China, CMEC maintains significant advance receipts as result of aggressively using export buyer’s credit (credit provided to foreign borrowers to finance imports of Chinese products). CMEC has barely used export seller’s credit, instead, using more export buyer’s credit, which has no default risk and thus provides better working capital. CMEC's advance receipts amounted to Rmb9.1bn as at 30 June 2013, which is 21% of the backlog on the same date. CMEC can assist project owners, in particular in developing countries, to obtain financing for infrastructure projects from Chinese financial institutions and development funds in two ways: export buyer’s credit and export seller’s credit. The Chinese government is providing increasing financial support to help developing countries with their infrastructure development under the ‘Going Global’ policy and ‘Supporting Developing Countries’ policy.
0%
5%
10%
15%
20%
25%
30%
2009 2010 2011 2012
CMEC Harbin Electirc Dongfang Electric Sinohydro CAMCE Shanghai electric
Good pricing and cheaper costs also contribute to higher margins
Buyer’s credit helps working capital
Initiation of Coverage: China Machinery Engineering Corporation 14 February 2014 21
Figure 43: Export credit amount from the Export-Import Bank of China
Figure 44: Advance receipts versus contract backlog
Source: Export-Import Bank of China Source: Export-Import Bank of China
Strong balance sheet and cash flow generating ability
CMEC’s has a strong balance sheet with low debt and rich cash in hand. Its net cash amount was close to its current market cap as at 13 February 2014. Furthermore, we believe CMEC has the ability to generate strong operating cash flow which may be used for potential acquisitions.
Figure 45: CMEC’s net cash Figure 46: Operating cash flow versus capex
Note: 2014/15E market cap represents market cap as at 13 February 2014; Source: Company data
Source: Company data
1,0281,239 1,300
1,7311,442
1,695 1,754149
174 183
295
326
439 425
0
500
1,000
1,500
2,000
2,500
2006 2007 2008 2009 2010 2011 2012
Export Sellers Export Buyers
US$ bn
CAGR = 19%
20%
27%
31%29%
21%
0%
5%
10%
15%
20%
25%
30%
35%
0
2
4
6
8
10
12
14
2009 2010 2011 2012 H113
Receipt in advance Receipts / Backlog
Rmb bn
-5,000
0
5,000
10,000
15,000
20,000
25,000
2009 2010 2011 2012 2013E 2014E 2015E
Total debt Net cash mkt cap at year end
Rmb m
(2,000)
(1,000)
0
1,000
2,000
3,000
4,000
5,000
6,000
7,000
8,000
2009 2010 2011 2012 2013E 2014E 2015E
Operating cash flow CAPEX
Rmb m
Net cash over the past four years
Initiation of Coverage: China Machinery Engineering Corporation 14 February 2014 22
Extensive global network
CMEC has a long history of EPC contract work and trading around the world, and it currently operates 13 affiliates and 26 foreign representative offices overseas, covering multiple industries including project contracting, trading, engineering design, international bidding, international exhibitions, international logistics and property management.
Figure 47: International coverage
Source: Company data, UBS
Experienced management team and project managers
CMEC's key asset is its experienced management team and project manager team. It has a strong technical team of 1,201 engineers, 704 of whom are designers, 19 certified architects, 20 certified budgeting specialists and 163 international project management professionals (IPMP) which account for 13.5% of the overall team (2 are level A, 7 are level B, 154 are level C). CMEC also has 131 project managers.
Good overseas track record
Key asset is experienced personnel
Initiation of Coverage: China Machinery Engineering Corporation 14 February 2014 23
Figure 48: Experienced senior management team
Role Experience Educational level Certificates
Sun Bai Chairman and Executive
Director
30+ years industry experience and
management experience
Master's degree in
economics
National senior economist
Zhang Chun President and Executive
Director
Over 21 years industry experience Bachelor’s degree in thermal
engineering
National senior engineer
Li Taifang Vice Chairperson and
Executive Director
Over 17 years financial
management experience
Postgraduate Member of Chinese Institution of Certified
Public Accountants, national senior economist
Jiao Hanzhou Vice president, in charge of
trading business
Almost 30 years of experience in
the machinery and equipment
industry, joined CMEC in 1982
Bachelor’s degree in electric
apparatus
Senior engineer
Jin Chunsheng Vice president, in charge of
international engineering
contracting business
Over 30 years of experience in the
machinery and equipment industry,
joined CMEC in 1982
Bachelor’s degree in
hydraulic machinery
Professorial engineer
Zhang Jianguo Vice president, in charge of
trade and other business
Joined CMEC in 1991 Master's degree in history Senior economist
Wang Dingning Vice president, in charge of
the general affairs
Joined CMEC in 2006 Graduated from the Party
School in economic
management
Senior political work specialist
Li Chaoyang Vice president, in charge of
international engineering
contracting business
Over 15 years of experience in the
machinery and equipment industry,
joined CMEC in 2005
Bachelor’s degree in
computer science and
application
Senior engineer
Zhou Yamin CFO Joined CMEC in 2011 Bachelor’s degree in
accounting
Member of Chinese Institution of Certified
Public Accountants, an international certified
practicing accountant and a senior
international finance manager
Chen Minjian Secretary to The Board Joined CMEC in 1978 Graduated from the
University of International
Business and Economics
Senior economist
Source: Company data
Rich contract backlog
CMEC’s contract backlog rose rapidly from US$3.7bn to US$7.1bn in 2009-12, implying a CAGR of 25%, while revenue from the construction contracts segment was US$2.1bn in 2012; this had a 3.3x backlog/revenue ratio. Furthermore, as at end-H113 CMEC had another US$11.8bn of contracts which had been signed but had not yet come into effect.
Figure 49: Contract backlog Figure 50: Signed contracts pending as at the end of H113
Source: Company data Source: Company data
0.0x
1.0x
2.0x
3.0x
4.0x
0
2,000
4,000
6,000
8,000
10,000
12,000
2009 2010 2011 2012 H113
Construction contracts revenue New contractBacklog Backlog/revenue
US$ m
PowerUS$4.8bn41%
TransportationUS$3.4bn28%
TelecommunicationsUS$0.1bn1%
Non-core sectorsUS$3.5bn30%
Backlog covers close to 3x of revenue
Initiation of Coverage: China Machinery Engineering Corporation 14 February 2014 24
Management strategy
Focusing on overseas
CMEC's overseas revenue exposure was around 90% in the past, much higher than normal transportation infrastructure contractors (such as CCCC, CRCC and CRG). The remaining around 10% domestic revenue mainly comes from domestic trading business.
Figure 51: Overseas revenue as % of total revenue comparison
Note: Overseas revenue includes all segments. Source: Company data
According to the Ministry of Commerce, CMEC ranked eleventh and twelfth in terms of overseas revenue and new contract revenue, respectively, in 2013. However, it was fourth and third respectively for power related overseas revenue and new contract revenue.
Figure 52: Top Chinese enterprises in contracted projects overseas in 2013
Rank Company
Overseas revenue
(US$ bn) Focusing Sector Company
Overseas new contract (US$ bn) Focusing Sector
1 ZTE 13.0 Telecommunication Huawei 13.9 Telecommunication
2 Huawei 9.2 Telecommunication China State Construction Engineering 11.2 Housing
3 China State Construction Engineering 5.7 Housing ZTE 9.0 Telecommunication
4 Sinohydro 5.3 Power Sinohydro 9.0 Power
5 China Harbour Engineering 3.4 Transportation China Gezhouba 8.2 Power
6 CITIC Construction 2.8 Housing China Harbour Engineering 6.0 Transportation
7 ZPMC 2.7 Manufacturing China Civil Engineering Construction 4.9 Transportation
8 China Gezhouba 2.4 Power CCCC 4.8 Transportation
9 China Road and Bridge 2.2 Transportation ZPMC 3.5 Manufacturing
10 SEPCOIII 2.2 Power Sinopec International 3.5 Petroleum
11 CMEC 2.1 Power China Road and Bridge 2.5 Transportation
12 Shanghai Electric 2.1 Power CMEC 2.3 Power
Source: Ministry of Commerce
Focusing on power
According to ENR’s top 225 international contractors list in 2012, CMEC ranked eighth in terms of revenue from the international power market. And CMEC's power projects delivered much higher gross margins than other projects (such as transporation and telecommunications).
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
2009 2010 2011 2012 H113
CMEC CCCC CRCC CRG CSCI Sinohydro CAMCE
Main focus is overseas
47% of revenue in power, with significantly higher margins
Initiation of Coverage: China Machinery Engineering Corporation 14 February 2014 25
Figure 53: Top 10 international contractors in the global power market
2011 2012
Rank Company International revenue in power market
(US$ m) Country Company International revenue in power market
(US$ m) Country
1 Grupo Acs 4,049 Spain Abeinsa Sa 3,918 Spain 2 Abeinsa Sa 3,675 Spain Grupo Acs 3,422 Spain 3 Sinohydro 2,244 China Hyundai E&C 2,891 South Korea 4 VINCI 2,241 France Sinohydro 2,737 China 5 SEPCOIII 2,020 China VINCI 2,210 France 6 SEPCO 1,570 China SEPCOIII 2,099 China 7 Shanghai Electric 1,546 China SEPCO 1,880 China 8 CMEC 1,482 China CMEC 1,592 China 9 Metka 1,157 Greece SAMSUNG C&T 1,549 South Korea 10 Dongfang Electric 1,156 China Grupo Isolux Corsan Sa 1,537 Spain
Others 25,904 28,068 Total 47,043 51,902
Source: ENR, company data
Asset injection
We believe an asset injection from the parent company, SINOMACH, will benefit CMEC. According to CMEC’s IPO prospectus, SINOMACH intended to transfer all of its equity interest in China National Electric Engineering (CNEEC), China National Complete Engineering Corporation (CMCEC) and China National Automation Control System Corporation (CACS) to CMEC within three years after listing (before 2016). We estimate 2015 EPS accretion of 5% if injection of CNEEC and CMCEC can be completed by end of 2014E.
Figure 55: Non-listed SINOMACH subsidiaries under SINOMACH’s intention of injection
Business Geographical focus Revenue in 2011
(Rmb m) Revenue in H112
(Rmb m)
CNEEC Engineering contracting of power projects South-east Asia, China, Middle Asia, Africa 3,754 2,434
CMCEC Civil engineering projects and property development China 1,457 828
CACS Traditional automation technologies and supply of electrical
cables and wires and other related equipment
China 1,526 582
Source: Company data
In addition, SINOMACH has several listed assets, which may turn out to be good long-term assets to be acquired by CMEC.
Figure 56: SINOMACH’s listed assets
SINOMACH's listed assets Code Mkt cap (Rmb m) 2012 Net profit (Rmb m) 2012 Net gearing
CMEC 1829.HK 18,223 1,928 -189%
CAMCE 002051.SZ 12,139 635 -177%
YTO 0038.HK 3,179 349 0%
ZYS 002046.SZ 2,354 65 10%
Sinomach Auto 600335.SS 9,408 556 338%
Changlin 600710.SS 1,444 10 -7%
Linhai Power 600099.SS 1,157 0 -55%
Lanpec 601798.SS 4,230 105 4%
Erzhong Heavy 601268.SS 5,298 (2,889) 196%
Note: Above data as at 13 February 2014; YTO = YTO Group Corporation, ZYS = Luoyang Bearing Science & Technology Co.,Ltd., Sinomach Auto = Sinomach Automobile Co.,Ltd., Changlin = Changlin Company Limited, Lanpec = Lanpec Technologies Limited, Erzhong Heavy = China Erzhong Group Heavy Industries Co.,Ltd. Source: Company data, Bloomberg
Figure 54: Scenario analysis on asset injection
Funding cost
4.0% 4.5% 5.0% 5.5% 6.0%
Net
mar
gin
4% 4% 4% 3% 3% 3%
5% 5% 5% 4% 4% 3%
6% 6% 6% 5% 5% 4%
7% 7% 7% 6% 5% 5%
8% 8% 8% 7% 6% 5%
Source: UBS estimates
More assets from the parent company
Initiation of Coverage: China Machinery Engineering Corporation 14 February 2014 26
Financials
Profit and loss We expect CMEC to deliver a 15% reported net profit CAGR in 2013-15 on a 12% revenue CAGR.
Figure 57: Profit & loss table
(Rmb m) 2009 2010 2011 2012 2013E 2014E 2015E
Revenues 19,288 19,077 20,518 21,296 21,487 26,855 29,644
Cost of goods sold (17,528) (16,135) (16,859) (17,565) (17,635) (21,978) (24,348)
Gross profit 1,760 2,942 3,659 3,732 3,852 4,877 5,295
SGA (1,051) (1,096) (1,385) (1,565) (1,612) (2,014) (2,223)
EBIT 570 1,526 2,138 2,041 2,155 2,778 2,987
Income from associates 0 0 (0) (0) (0) - -
Finance income 353 412 402 583 791 826 893
Finance expenses (76) (386) (560) (30) (432) (31) (31)
Profit before taxes 835 1,561 1,987 2,616 2,601 3,590 3,866
Taxes (225) (429) (515) (688) (650) (897) (967)
Profit after tax 610 1,132 1,472 1,928 1,950 2,692 2,900
Minorities 3 4 3 (0) (0) (0) (0)
Net profit 614 1,136 1,475 1,928 1,950 2,692 2,899
Pre-x net profit 650 1,385 1,851 1,918 2,194 2,688 2,895
Revenue growth NA -1% 8% 4% 1% 25% 10%
EBIT margin 3% 8% 10% 10% 10% 10% 10%
EBIT growth NA 168% 40% -5% 6% 29% 8%
Net profit growth NA 85% 30% 31% 1% 38% 8%
Source: Company data, UBS estimates
New effective contracts is the major leading indicator for potential revenue growth. We estimate new effective contracts to grow 16%/11% YoY in 2014/2015 to US$3.9/US$4.3bn after retreating 23% YoY in 2013E, partly underpinned by strong signed contracts pending (US$11.8bn as at 30 June 2013). Power should remain the major new contract contributor, representing 44% of our estimated total effective new contracts in 2015, delivering growth rates of 15%/10% YoY in 2014E/2015E. In terms of regions, we expect traditional markets (Africa and Asia) to remain dominant, with South America becoming another rising star (for example, a potential a new railway project in Argentina). The company’s backlog at the end of H113 was US$7.1bn, which is equivalent to 3.3x 2012 construction revenue of Rmb13.2bn.
15% net profit CAGR in 2013-15E
New contracts to grow 16%/11% YoY in 2014E/2015E
Initiation of Coverage: China Machinery Engineering Corporation 14 February 2014 27
Figure 58: Newly effective contracts by segment Figure 59: Newly effective contracts growth rate
(US$ m) 2009 2010 2011 2012 2013E 2014E 2015E
Power 789 2,515 1,583 4,127 1,512 1,739 1,913
Transportation - 112 407 9 706 811 893
Telecommunications - - 209 11 370 425 468
Non-core sectors 312 328 28 218 773 927 1,066
Total 1,100 2,955 2,227 4,365 3,360 3,903 4,339
Source: Company data, UBS estimates
Source: Company data, UBS estimates
Looking into different business segments, we expect international engineering construction contracts to be the major revenue growth driver as we believe demand for power infrastructure in developing countries will grow quickly in the next few years.
Figure 60: Revenue breakdown Figure 61: Revenue growth for different segments
Source: Company data, UBS estimates Source: Company data, UBS estimates
The power segment, as the largest gross profit contributor, benefitted from high gross margins of 20.7%-27.2% in 2010-12. We estimate power’s premium gross margin to continue in 2014-15 at 22.1-22.4%. Unlike some Chinese peers, the performance matrix for CMEC management is profit and return, and we expect the gross margin of construction contracts to be slightly lower in 2014-15 and gradually decline later due to increasing competition among Chinese peers in overseas markets.
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
2009 2010 2011 2012 2013E 2014E 2015E
Power Transportation Telecommunications Non-core sectors
71%63% 59% 62%
72% 74% 74%
26%33% 37% 34%
23% 22% 22%
3% 4% 4% 4% 5% 4% 4%
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
2009 2010 2011 2012 2013E 2014E 2015EConstruction contracts Trading Others
-40%
-30%
-20%
-10%
0%
10%
20%
30%
40%
2010 2011 2012 2013E 2014E 2015E
Overall Construction contractsTrading Others
International engineering contracting to be the major revenue growth driver
Power gross margin to stay high
Initiation of Coverage: China Machinery Engineering Corporation 14 February 2014 28
Figure 62: Gross margin of different segments Figure 63: Gross margin of construction contacts in different sectors
Source: Company data, UBS estimates Source: Company data, UBS estimates
We estimate that SG&A as a percentage of revenue will stabilise around 7.5% of revenue in 2013-15 and that the EBIT margin will be around 10%.
Figure 64: Selling expenses and administrative expenses Figure 65: EBIT and EBITDA margin
Source: Company data, UBS estimates Source: Company data, UBS estimates
We forecast finance income (from interest income and finance income on receivables from customers) of Rmb826m/Rmb893m in 2014/2015, representing 30.7%/30.8% of reported net profit. We expect the forex loss to shrink to zero in 2014/2015 as we expect no Renminbi appreciation in 2014/2015, after a Rmb400m forex loss in 2013E.
0%
10%
20%
30%
40%
50%
60%
2009 2010 2011 2012 2013E 2014E 2015E
Overall Construction contracts
Trading Others
0%
5%
10%
15%
20%
25%
30%
35%
2009 2010 2011 2012 2013E 2014E 2015E
Telecommunications Non-core sectorsPower Transportation
0%
2%
4%
6%
8%
10%
0
500
1,000
1,500
2,000
2,500
2009 2010 2011 2012 2013E 2014E 2015E
Selling expenses Administrative expenses % of revenue
Rmb m
2%
4%
6%
8%
10%
12%
2009 2010 2011 2012 2013E 2014E 2015E
EBIT margin EBITDA margin
EBIT margin to stabilise
Finance income still significant, forex loss to ease
Initiation of Coverage: China Machinery Engineering Corporation 14 February 2014 29
Figure 66: Finance income breakdown Figure 67: Forex loss against Renminbi appreciation
Source: Company data, UBS estimates Source: Company data, UBS estimates
Balance sheet We estimate the balance sheet will remain strong and the company’s net cash position will continue in 2013-15, as we have not factored in the asset injection of CNEEC, CMCEC and CACS.
Figure 68: Total cash versus total debt Figure 69: Net gearing
Source: Company data, UBS estimates Source: Company data, UBS estimates
Figure 70: Balance sheet
(Rmb m) 2010 2011 2012 2013E 2014E 2015E
Net tangible fixed assets 345 392 444 478 503 517 Net intangible fixed assets 112 1,668 1,851 1,912 1,973 2,034 Net working capital -5,329 -6,177 -8,290 -6,884 -5,954 -6,034 Other long-term liabilities -324 -132 -62 -62 -62 -62 Total invested capital -5,196 -4,249 -6,057 -4,556 -3,541 -3,544 Investments/other assets 6,311 5,218 4,539 4,664 6,475 7,334 Total capital employed 1,115 968 -1,518 108 2,934 3,789 Net (cash)/debt -3,243 -4,785 -11,801 -11,907 -11,090 -12,193 Provisions 393 380 366 366 366 366 Minority Interests -4 -6 -3 -2 -2 -1 Shareholders’ Funds 3,969 5,380 9,920 11,652 13,661 15,618 Total capital employed 1,115 968 -1,518 108 2,934 3,789 Fixed asset growth NA 13% 13% 8% 5% 3% Capital employed growth NA -13% NA NA 2609% 29%
Source: Company data, UBS estimates
0%
2%
4%
6%
8%
0
200
400
600
800
1,000
2009 2010 2011 2012 2013E 2014E 2015E
Interest incomeFinance income on receivables from customers% of avg. receivable% of avg. cash
Rmb m
25
332
505 400
- -
0.0%
3.3%
5.0%
1.0%
2.9%
-0.7%
0.0%
-1%
0%
1%
2%
3%
4%
5%
6%
0
100
200
300
400
500
600
2009 2010 2011 2012 2013E 2014E 2015EForeign exchange net loss Rmb/USD appreciation
Rmb m
-5,000
0
5,000
10,000
15,000
20,000
25,000
2009 2010 2011 2012 2013E 2014E 2015ETotal cash Total debt
Rmb m
-250%
-200%
-150%
-100%
-50%
0%
2009 2010 2011 2012 2013E 2014E 2015E
Net cash position to continue in 2013-15E, without taking into account of acquisitions
Initiation of Coverage: China Machinery Engineering Corporation 14 February 2014 30
Advance receipts amounted to Rmb12.7bn at the end of 2012, and declined to Rmb9.2bn at the end of H113. We expect advance receipts to remain at high levels during 2013-15 as the company increasingly uses export buyer’s credit.
Figure 71: Advance receipts versus backlog Figure 72: Construction contracts and as % of revenue
Source: Company data, UBS estimates
Source: Company data, UBS estimates
Figure 73: Net working capital
(Rmb m) 2010 2011 2012 2013E 2014E 2015E
Accounts receivable 4,919 6,427 5,510 5,560 6,958 7,685
Inventory 175 212 226 227 282 313
Other current assets 8,447 7,521 10,111 9,473 9,524 9,576
Accounts payable (9,605) (9,671) (10,943) (11,492) (12,068) (12,673)
Other short term liabilities (9,265) (10,666) (13,193) (10,651) (10,651) (10,936)
Net working capital (5,329) (6,177) (8,290) (6,884) (5,954) (6,034)
Days of receivables 94 114 94 94 95 95
Days of Inventory 3 4 4 4 4 4
Days of payables 217 209 227 238 200 190
Days of NWC (102) (110) (142) (117) (81) (74)
Source: Company data, UBS estimates
Cash flow We estimate operating cash to improve significantly from 2015 as more new contracts are signed in terms of export buyer’s credit, hence significant advance receipts.
20%
27%
31%29%
21%20% 18%
0%
5%
10%
15%
20%
25%
30%
35%
0
2
4
6
8
10
12
14
2009 2010 2011 2012 2013E 2014E 2015E
Receipt in advance Receipts / Backlog
Rmb bn
0%
5%
10%
15%
20%
25%
30%
35%
0
1,000
2,000
3,000
4,000
5,000
6,000
7,000
8,000
2009 2010 2011 2012 2013E 2014E 2015E
Construction contracts as % of revenue
Rmb m
Advance receipts to remain high
OpCF to turn strong in 2015E
Initiation of Coverage: China Machinery Engineering Corporation 14 February 2014 31
Figure 74: Cash flow
Rmb m 2010 2011 2012 2013E 2014E 2015E
EBIT 1,526 2,138 2,041 2,155 2,778 2,987
Depreciation 41 72 99 107 116 126
Change in working cap 4,291 1,434 5,037 (1,531) (2,741) (779)
Other operating (139) (306) 110 (324) 7 7
Operating cash flow 5,718 3,338 7,287 407 161 2,341
Interest 358 348 550 760 795 862
Taxes paid (445) (683) (603) (650) (897) (967)
Capex (21) (925) (309) (202) (202) (202)
Free cash flow 5,610 2,079 6,925 314 (144) 2,035
Net acquisitions / disposals 3 1 5 0 0 0
Dividends (common) (273) (698) (354) (675) (682) (942)
Dividends (preferred) 0 0 0 0 0 0
Share issues / buybacks 0 0 3,012 457 0 0
Other NA (168) (2,633) (305) 26 26
Cash flow (inc)/dec in net debt NA 1,214 6,955 (208) (800) 1,119
Capex/sales 0.1% 4.5% 1.4% 0.9% 0.8% 0.7%
Net debt to equity -81.7% -88.9% -119.0% -102.2% -81.2% -78.1%
Source: Company data, UBS estimates
Return on capital We estimate ROE to be around 20% during 2013-15.
Figure 75: ROCE/ROE decomposition
2010 2011 2012 2013E 2014E 2015E
Asset turnover -367.2% -434.5% -413.3% -404.9% -663.4% -836.8%
EBIT margin 8.0% 10.4% 9.6% 10.0% 10.3% 10.1%
EBIT ROIC -29.4% -45.3% -39.6% -40.6% -68.6% -84.3%
Taxes 72.5% 74.1% 73.7% 75.0% 75.0% 75.0%
Returns on invested capital -21.3% -33.5% -29.2% -30.5% -51.5% -63.2%
IC as % of Capital employed -466.0% -453.4% 1875.6% 752.9% -266.1% -105.4%
Returns on other invested capital -3.7% -6.4% 0.4% -5.1% 0.2% 0.2%
Other assets/CE 566.0% 553.4% -1775.6% -652.9% 366.1% 205.4%
Returns on capital employed 78.3% 116.6% -554.1% -195.9% 137.8% 67.0%
Leverage 33.3% 25.0% -4.3% -8.9% 15.0% 28.8%
Minorities 109.8% 108.2% 104.8% 103.4% 102.9% 102.5%
Exceptional 100.0% 100.0% 100.0% 100.0% 100.0% 100.0%
ROE 28.6% 31.6% 25.2% 18.1% 21.3% 19.8%
ROE (adjusted) 34.9% 39.6% 25.1% 20.3% 21.2% 19.8% Source: Company data, UBS estimates
Initiation of Coverage: China Machinery Engineering Corporation 14 February 2014 32
Valuation
Price target derivation We initiate coverage of CMEC with a Buy rating and price target of HK$8.10, which implies 10.0x/9.2x 2014E/2015E PE. We derive our 12-month price target by applying PE multiples on 2014E EPS. We apply a 7% PE multiple discount on listed Korean E&C companies to arrive at our target multiple of 10.0x as we believe Korean E&C companies are the closest peers. The discount to the price target implied PE for Korean E&C companies is to reflect CMEC being strong on projects backed by the Chinese government, while it is still weaker than Korean peers in commercial markets.
Figure 76: Price target derivation
EPS
2014E EPS (Rmb) 0.65
EPS CAGR (2013-15E) 15%
PE (x)
Target 2014 PE (x) 10.0
Historical PE avg. (x) 7.5
Premium/(discount) 33%
Korean E&C (PT implied) 10.7
Premium/(discount) -7%
Rating/PT
Price target (HK$) 8.10
Current price (HK$) 5.65
Upside/(downside) 43%
Rating Buy
Other financials
New contract CAGR (2013-15E) 13.6%
Net margin 2014E 10.0%
Net gearing 2014E -132%
ROE 2014E 21.3% Source: UBS estimates
CMEC is now trading slightly below its historical mean in terms of both forward PE and forward P/BV. We expect a re-rating as we believe growth will resume in 2014-15 after a weak 2013.
Figure 77: 12-month forward PE Figure 78: 12-month forward P/BV
Source: Company data, UBS estimates Source: Company data, UBS estimates
0
2
4
6
8
10
12
Dec-
12
Jan-
13
Feb-
13
Mar
-13
Apr-1
3
May
-13
Jun-
13
Jul-1
3
Aug-
13
Sep-
13
Oct
-13
Nov
-13
Dec-
13
Jan-
14
Forward 12 m PE -1 S.D. Mean +1 S.D.
0.0
0.5
1.0
1.5
2.0
2.5
Dec-
12
Jan-
13
Feb-
13
Mar
-13
Apr-1
3
May
-13
Jun-
13
Jul-1
3
Aug-
13
Sep-
13
Oct
-13
Nov
-13
Dec-
13
Jan-
14
Forward 12 m P/BV -1 S.D. Mean +1 S.D.
Initiate with a Buy rating and price target of HK$8.10
Initiation of Coverage: China Machinery Engineering Corporation 14 February 2014 33
Comparables Our price target of HK$8.10 implies 2014E/2015E PE of 10.0x/9.2x, which is at a premium to most Hong Kong-listed Chinese construction companies (CCCC, CRCC and CRG), although at a discount to CSCI. We think this is reasonable as CMEC benefits more from its high overseas exposure and proven track record.
Korea-listed E&C companies
Korean E&C companies include Hyundai E&C (000720.KS), Daelim Industrial (000210.KS), Samsung Engineering (028050.KS), Hyundai Development (012630.KS) and GS E&C (006360.KS). According to UBS estimates, Korean E&C companies are trading at 2014/2015 PE of 23.4x/9.5x on abnormal earnings growth given some were loss making in 2012-13.
HK-listed construction companies
Chinese construction companies listed in Hong Kong include CCCC (1800.HK), CRCC (1186.HK), CRG (0390.HK), CSCI (3311.HK) and MCC (1618.HK). According to Bloomberg and UBS estimates, Hong Kong listed Chinese construction companies are trading at average 2014E/2015E PE of 7.3x/6.5x, on an average earnings CAGR of 15% over 2013-15E.
A-share listed construction companies
Major A-share listed construction companies with overseas exposure include Sinohydro (601669.SS), CREC (600528.SS), CAMCE (002051.SZ), Shenzhen Tagen (000090.SZ), Zhejiang Southeast Space Frame (002135.SZ) and China Haisum (002116.SZ). According to Wind, this group of companies trades at average 2014E/2015E PE of 10.7x/8.6x, on an average earnings CAGR of 21% in 2013-15E. The closest comparable with CMEC in the A-share market is CAMCE, which is trading at 13.0x/10.7x PE in 2014E/2015E.
Global construction companies
Major global listed construction companies with exposure in the power segment include Acs (ACS.SM), Jacobs Engineering Group (JEC.N), WorleyParsons (WOR.AX) and Abengoa (ABG.A). According to Bloomberg and UBS estimates, this group of companies trades at average 2014E/2015E PE of 15.4x/12.2x, on an average earnings CAGR of 8% over 2013-15E.
Figure 79: Implied multiples
2014E 2015E
Implied PE (x) 10.0 9.2
Implied P/BV (x) 1.9 1.7
Implied dividend yield 3.6% 3.9%
ROE 21% 20%
Implied EV/EBITDA (x) 5.3 4.6
Source: UBS estimates
HK listed peers
A-share peers
Global peers
Initiation of Coverage: China Machinery Engineering Corporation 14 February 2014 34
Figure 80: Valuation
Name Ric code Mkt cap Price PE (x) P/BV (x) Div. Yld (%) ROE (%) EPS CAGR
(US$ bn) (LC) 2013E 2014E 2015E 2013E 2014E 2015E 2013E 2014E 2015E 2013E 2014E 2015E 2013-15E
HK-listed
CMEC 1829.HK 3.0 5.65 8.4 6.8 6.3 1.6 1.3 1.2 3.7 5.2 5.6 20.3 21.2 19.8 15%
CCCC 1800.HK 12.0 5.76 5.8 4.9 4.5 0.9 0.7 0.6 3.6 5.0 5.4 13.8 14.3 13.9 13%
CRCC 1186.HK 10.7 6.75 6.3 5.7 5.2 0.8 0.7 0.6 2.6 2.9 3.1 13.7 13.4 13.0 9%
CRG 0390.HK 9.5 3.47 6.9 5.9 5.4 0.7 0.6 0.6 2.3 2.6 2.8 10.4 10.9 10.8 12%
CSCI 3311.HK 7.1 14.12 20.7 15.6 13.3 3.6 3.1 2.6 1.5 1.9 2.3 18.4 21.1 21.4 25%
Sinopec Engineering 2386.HK 5.6 9.78 8.3 6.8 5.8 1.5 1.3 1.1 3.6 4.4 5.2 28.5 21.0 20.9 19%
MCC* 1618.HK 5.0 1.35 7.0 5.6 5.3 0.5 0.4 0.4 1.1 1.7 4.0 6.8 7.7 7.8 15%
Average 9.1 7.3 6.5 1.4 1.2 1.0 2.6 3.4 4.1 16.0 15.7 15.4 15%Weighted average 8.6 7.0 6.3 1.3 1.1 0.9 2.7 3.4 3.9 15.0 14.9 14.7 14%A-share
Sinohydro** 601669.SS 4.4 2.82 5.8 5.1 4.5 0.8 0.7 0.7 4.3 4.8 5.2 14.1 14.5 14.6 14%
CAMCE** 002051.SZ 2.0 19.05 14.7 13.0 10.7 2.4 2.2 1.9 1.8 2.0 2.4 16.5 16.8 17.6 18%
Shenzhen Tagen** 000090.SZ 0.6 6.64 12.4 10.6 8.1 1.1 1.0 0.9 NA NA 0.0 8.9 9.4 11.0 24%
China Haisum** 002116.SZ 0.5 14.58 18.7 14.3 11.4 4.3 3.5 2.8 1.5 1.9 2.2 23.3 24.4 24.6 28%
Average 12.9 10.7 8.6 2.2 1.9 1.6 2.5 2.9 2.5 15.7 16.3 17.0 21%Weighted average 9.5 8.2 6.8 1.5 1.3 1.1 3.1 3.5 3.9 14.9 15.3 15.8 17%Global
Hyundai E&C 000720.KS 5.8 56500.00 12.5 11.2 8.9 1.3 1.2 1.1 0.9 1.2 1.6 10.5 10.7 12.3 19%
Daelim Industrial 000210.KS 2.8 85600.00 -120.1 15.4 6.7 0.6 0.7 0.6 0.1 0.6 1.2 -0.5 4.5 9.6 NA
Samsung Engineering 028050.KS 2.8 75100.00 -3.9 30.8 12.2 2.1 2.8 2.4 0.3 0.8 2.0 -54.5 9.1 19.6 NA
Hyundai Development 012630.KS 1.8 25800.00 -9.1 29.8 11.7 0.8 0.9 0.9 0.8 1.6 1.6 -9.3 3.0 7.3 NA
GS E&C 006360.KS 1.4 30100.00 -2.2 30.1 8.1 0.4 0.5 0.5 0.0 0.3 1.3 -19.7 1.6 5.9 NA
Acs ACS SM 11.5 26.70 12.5 10.9 11.0 3.0 2.7 2.4 4.3 4.9 4.9 23.9 24.5 21.9 7%
Jacobs Engineering JEC.N 7.8 60.25 15.5 16.3 13.9 1.6 1.8 1.6 0.0 0.0 0.0 10.7 10.8 11.3 15%
WorleyParsons WOR.AX 3.4 15.57 18.7 14.3 12.9 2.9 1.8 1.8 3.8 4.9 5.4 15.6 12.4 13.7 -4%
Abengoa* ABG.A 3.4 3.45 26.3 20.0 11.1 1.5 1.6 1.3 2.2 2.3 2.0 5.8 8.1 11.9 12%
Average -5.5 19.9 10.7 1.6 1.5 1.4 1.4 1.8 2.2 -1.9 9.4 12.6 10%Weighted average 3.0 16.2 11.1 2.0 1.8 1.7 1.9 2.3 2.6 7.2 13.4 14.8 8%Overall
Median 8.3 10.9 8.1 1.1 1.0 0.9 2.0 2.2 2.4 10.7 10.9 12.3 14%
Average 3.8 12.8 8.6 1.5 1.4 1.2 2.1 2.6 2.9 8.1 12.4 13.7 13%
Weighted average 6.6 10.6 8.3 1.5 1.3 1.2 2.4 3.0 3.3 11.7 13.8 14.2 12%
Above data as at 13 February 2014. Source: *Bloomberg, **Wind, UBS estimates
Initiation of Coverage: China Machinery Engineering Corporation 14 February 2014 35
Appendix
Company background Figure 81: Shareholder structure
Source: Company data
SINOMACH NSSF H share
China Machinery Engineering Corporation(CMEC, 1829.HK)
Trading Business
International Engineering Contracting Business
Other Businesses
CMEC Engineering C.A. (Venezuela)
China Machinery Engineering
Argentina S.A.
CMEC Nigeria Development
Zhongnan
CMEC International Engineering
China Machinery R&D
CMEC Senegal S.A.
2.18%77.99% 19.83%
100%
100%
50%
100%
100%
99.9%
100%
China National Electric Engineering
(CNEEC)
China National Automation
Control System(CACS)
China National Complete
Engineering(CMCEC)
100%
100%
100%
Unlisted SINOMACH subsidiaries under SINOMACH’s intention of injection to CMEC
China CAMC Engineering
(CAMCE, 002051.SZ)
YTO Group(00038.HK,
601038.SS)
ZYS (002046.SZ)
SINOMACH Automobile (600335.SS)
Changlin (600710.SS)
Linhai Power (600099.SS)
Lanpec (601798.SS)
Erzhong Heavy (601268.SS)
Initiation of Coverage: China Machinery Engineering Corporation 14 February 2014 36
Projects Figure 82: Representative completed power projects
Project
Completion
date Brief description
Contract value
(US$ m)
Thermal Power
Thermal power stations in Turkey Dec-11 CMEC contracted with a private Turkish conglomerate for two EPC projects in relation to two
thermal power stations with an installed capacity of 1 x 600 MW each in the power plant situated
in Catalagzi, Turkey. These two EPC projects were the largest thermal power projects undertaken
by a PRC contractor outside China at the time and represented the first export from China of a 600
MW supercritical thermal power unit.
613
Thermal power station in Pakistan Jul-10 CMEC contracted with a leading industrial conglomerate in Pakistan for an EPC project in relation
to a thermal power station with an installed capacity of 200+ MW in Sahiwal, Pakistan.
161
Thermal power station in Malaysia Sep-10 CMEC contracted with a Kuala Lumpur-listed enterprise for an EPC project in relation to a thermal
power station with an installed capacity of 2 x 135 MW in Sarawak, Malaysia. Prior to this project,
it had completed two projects in Kuching, Sarawak, Malaysia in relation to the construction of two
thermal power stations with an installed capacity of 2 x 50 MW and 2 x 55 MW, respectively.
201
Thermal power station in Indonesia Nov-09 CMEC contracted with the Indonesian government for an EPC project in relation to a thermal
power station with an installed capacity of 2 x 115 MW in Sumatera, Indonesia.
224
Expansion project for turbo-gas
power plant in Malabo, the
Republic of Equatorial Guinea
2012 CMEC contracted with the government of the Republic of Equatorial Guinea for an EPC expansion
project in relation to a turbo-gas power plant in Malabo, the Republic of Equatorial Guinea. The
project involved the installation of three single cycle turbo-gas generators with a total installed
capacity of 126MW. At the time, the total installed capacity of the operating power plant in the
European region of Malabo was only 28MW. The design and construction involved in the
expansion work under the project will complement the electric grid and city network to be
completed, to provide power supply for the whole of Malabo City.
124
Hydropower
Hydropower station in India Jul-11 CMEC contracted with a stated-owned electricity company in India for an EPC project in relation to
a hydropower station in India which includes 6x39 MW turbine hydrogenerator units and other
auxiliary machinery.
65
Hydropower station in the Republic
of Congo
Nov-10 CMEC contracted with the government of the Republic of Congo for an EPC project in relation to a
hydropower station with an installed capacity of 120 MW in Brazzaville, the Republic of Congo. It
was the largest engineering project undertaken by a Chinese contractor in the Republic of Congo at
the time and the largest hydropower station in the Republic of Congo built.
307
Power transformation stations and transmission lines
Power infrastructure in the Republic
of Angola
Oct-10 CMEC contracted with an Angolan state-owned enterprise for two EPC projects in relation to
two15kV power transformation stations and 60kV transmission lines as well as the household
electricity lines in Luanda, the capital of Angola.
39
Power transformation station in the
Republic of Equatorial Guinea
May-11 CMEC contracted with the government of the Republic of Equatorial Guinea for an EPC project in
relation to a 66kV power transformation station in Malabo, Equatorial Guinea.
81
Transmission lines and power
transformation project in Sudan
Jun-11 CMEC contracted with the government of Sudan for an EPC project in relation to 220kV
transmission lines and three 220/33/11kV power transformation substations respectively.
220
Power transmission and
transformation engineering project
in the Republic of Congo
2012 CMEC contracted with the government of the Republic of Congo for the construction work of a
power transmission and transformation EPC project. The project was a follow-up of the Imboulou
hydropower station project and involved connecting the Imboulou hydropower station, a completed
project in which it also acted as the contractor, with several small power stations to construct the
“major power channel” between Ponite-Noire, Brazzaville and Ouesso in the Republic of Congo.
This project is designed to supply power for the capital and surrounding areas, to greatly reduce
power shortages in the Republic of Congo. The scope of works for this project included: design,
construction, equipment procurement, installation, testing, staff training, guidance on commercial
operation and spare parts provision.
514
Source: Company data
Initiation of Coverage: China Machinery Engineering Corporation 14 February 2014 37
Figure 83: Representative ongoing power projects
Project
Commencement
date
Expected
completion date Brief description
Contract value
(US$ m)
Thermal Power
Thermal power stations in Turkey Feb-11 Jun-14 CMEC contracted with a private Turkish enterprise for an EPC project in
relation to a thermal power station with an installed capacity of 2 x
135 MW.
245
Thermal power stations in Sri Lanka
(Phases I and II)
Jul-07 Apr-14 CMEC contracted with the government of Sri Lanka for two EPC
projects in relation to a thermal power plant on Kalpitiya Peninsula, Sri
Lanka in two phases. Phase I involved the construction of one thermal
power station with an installed capacity of 1 x 300 MW, and phase II
involved the construction of two thermal power stations each with an
installed capacity of 2 x 300 MW. It was the largest cooperative project
between China and Sri Lanka and the largest government infrastructure
project in Sri Lanka at the time.
1,346
Thermal power station in Brest and
Vitebsk, the Republic of Belarus
Feb-11 Jan-14 CMEC contracted with two state-owned power enterprises for two EPC
projects in relation to two thermal power stations, each with an
installed capacity of 427 MW, in Brest and Vitebsk.
746
Power plant project in Salah Al-din, Iraq May-17 CMEC contracted with the government of Iraq for an EPC project in
relation to a power plant in Salah AL-din, Iraq, which was situated 16
km from the southeast of Samarra, Salah AL-din, Iraq and north of
Tigris River. CMEC was responsible for the construction of two gas
turbine generators with capacity of 630MW each. The scope of work
involved all construction works, including, but not limited to, land
levelling, surveying, design, provision of parts for the formation of a
complete set of generator (including gas turbines, boilers, generators
and ancillary equipment) with an installed capacity of 2×630MW,
construction, installation and testing, as well as the construction and
installation of ancillary buildings and facilities. It is the largest
generator in terms of installed capacity to be built in Iraq at present.
1,299
Hydropower
Hydropower station in Pakistan Apr-08 Jun-16 CMEC formed a consortium with Chinese state-owned enterprise
specialised in hydropower infrastructure construction, and contracted
with the Pakistani government for an EPC project in relation to a
hydropower station with an installed capacity of 972 MW in
Muzaffarabad, Pakistan. Its consortium partner was responsible for the
construction of civil engineering works at Nauseri, Thotha and Agar
Nullah while CMEC was responsible for the procurement and
installation of the machinery and electrical equipment as well as the
design of the metallic structure of the hydropower station.
497
Hydropower station in Myanmar Oct-10 Dec-13 CMEC contracted with the government of Myanmar for an engineering
contracting project in relation to a hydropower station with an installed
capacity of 3x40 MW in Myanmar.
51
Power transformation stations and
transmission lines
Power transmission and transformation
station in the Republic of Chad
Oct-11 Jan-14 CMEC contracted with the government of the Republic of Chad for an
EPC project in relation to a 90kV loop transmission line, four sets of
90/15kV power substations and a distribution network.
130
Reconstruction and expansion of
electricity grid in the Republic of Angola
(Phases I and II)
Nov-08 Mar-13 CMEC contracted with an Angolan state-owned enterprise for an EPC
project in relation to the restructuring and expansion of the electricity
grid in Luanda in two phases. The restructuring and expansion work
involved eight power transformation stations, 60kV transmission lines
in a total distance of 37.5 km, 125 substations with capacity of 1,000
KVA each and other residential electricity supply systems.
177
Source: Company data
Initiation of Coverage: China Machinery Engineering Corporation 14 February 2014 38
Figure 84: Representative completed transportation and telecommunications projects
Project Completion date Brief description
Contract value
(US$ m)
Transportation
Shipbuilding projects in Germany Jan-10 CMEC contracted with a German company for two projects in relation to the design and
construction of two 4,250 TEU (twenty-foot equivalent unit) container vessels respectively.
These vessels were approximately 261 meters’ long and weighed approximately 50,000
tonnes.
124
Railway project in the Republic of
Angola
May-09 CMEC contracted with an Angolan railway company for two EPC projects in relation to the
redevelopment and reconstruction of three railroads spanning from Bongo-Baia, Luanda
Harbor Area and Viana-Baia.
116
Shipbuilding projects in the
Republic of Angola
Dec-10 CMEC contracted with the government of the Republic of Angola for three projects in
relation to the design and procurement of 3,000 canoes.
118
Highway reconstruction and
asphalt paving in the Republic of
Congo
Oct-11 CMEC contracted with the government of the Republic of Congo for an EPC project in
relation to a highway reconstruction and asphalt paving construction. The highway was 125
km long and situated in North Congo running across Obouya, Boundji and Okoya and linked
the Republic of Congo with the Republic of Gabon. CMEC was responsible for site clearance,
earthworks, road construction, bridge construction, drainage structures, the incorporation of
signal transmission facilities, the construction of schools and medical centres in the suburban
area extending from the highway and the placement of gas stations every 100 km along the
highway.
124
Telecommunications
Telecommunications projects in
the Republic of Angola
Mar-11 CMEC contracted with an Angolan telecommunications enterprise for four EPC projects of
the Next Generation Network (NGN) in Angola; this was a packet-based network that
offered telecommunications services. The NGN project covered 15 states of Angola.
275
Source: Company data
Figure 85: Representative ongoing transportation and telecommunications projects
Project
Commencement
date
Expected
completion date Brief description
Contract value
(US$ m)
Transportation
Highway construction in the
Republic of Cote d’Ivoire
Nov-11 Dec-15 CMEC contracted with the government of the Republic of Cote d’Ivoire
for an EPC project in relation to the construction of a 23km highway.
CMEC was responsible for site clearance, earthworks, road construction,
bridge construction, drainage structures, tollbooths construction, the
incorporation of signal transmission facilities, etc.
135
Reconstruction of the Naypyidaw
Airport in Myanmar
Jan-11 Jul-14 CMEC contracted with the government of Myanmar for an EPC project
in relation to the expansion of the Naypyidaw Airport of Myanmar to
handle 3.5 million passengers annually. CMEC was responsible for: (i)
the procurement of building materials for the construction of the
terminals; (ii) the procurement, installation, examination, adjustment
and transfer of part of the mechanical and electrical equipment of the
terminals; and (iii) the construction of the terminals, walkways, elevated
highway and approach road.
95
Highway reconstruction and asphalt
paving in the Republic of Congo
Dec-11 Mar-15 CMEC contracted with the government of the Republic of Congo for an
EPC project in relation to a highway reconstruction. The highway is 87
km long and ran across Okoyo, Lekety and the Gabonese border and
links the Republic of Congo with the Republic of Gabon.
91
Telecommunications
2.5G network expansion and
3G network project in Bangladesh
Jan-12 Jan-14 CMEC contracted with a Bangladeshi telecommunications enterprise for
an EPC project in relation to the expansion of a 2.5G network and the
construction of a 3G network in Bangladesh.
211
Source: Company data
Initiation of Coverage: China Machinery Engineering Corporation 14 February 2014 39
Figure 86: Representative completed other projects
Project
Completion
date Brief description
Contract value
(US$ m)
Reinforcement of water supply
network in the Republic of Angola
(Phase I)
Oct-10 CMEC contracted with the government of the Republic of Angola for phase I of an EPC project in
relation to the reinforcement of the water supply system in Huambo, Angola which involved the
construction of 20 water stations, water supply pipes and connecting pipelines to individual
households.
10
Expansion of alkali mine in Turkey
(Phase III)
Aug-11 CMEC formed a consortium with a PRC enterprise and contracted with a Turkish enterprise for
phase III of an EPC project as a follow-up project in relation to the expansion of an alkali mine in
Beypazari, Turkey with 16 vertical wells and 16 horizontal wells. CMEC completed the first two
phases of the project which involved the construction of 30 pits.
16
Construction of 1,000 residential
units in Hulhumale, Maldives
2012 CMEC contracted with the government of the Republic of Maldives for the construction of 1,000
residential units in Hulhumale. 76
Source: Company data
Figure 87: Representative ongoing other projects
Project
Commencement
Date
Expected
completion date Brief description
Contract value
(US$ m)
Water supply system enhancement in
the Republic of Congo
Nov-08 Apr-14 CMEC contracted with the government of the Republic of Congo for an
EPC project in relation to the enhancement of the water supply system
of Brazzaville, capital of the Republic of Congo. CMEC was responsible
for the repairs of the old water plant and the construction of a new
water plant to increase production capacity.
305
Reconstruction of water supply
network in the Republic of Angola
(Phase II)
Oct-09 Jun-13 CMEC contracted with the government of the Republic of Angola for
phase II of an EPC project as a follow-up project in relation to a water
supply network in Luanda, the Republic of Angola.
70
Cement plant in the Republic of
Yemen
May-09 Dec-14 CMEC contracted with the government of the Republic of Yemen for an
EPC project in relation to the expansion of a cement factory by setting
up a clinker production line with a daily clinker capacity of 2,500
tonnes as well as a 32 MW power station.
134
Source: Company data
Regulatory Figure 88: Critical process of international engineering contracting business
Source: Company data
Achieved intention
Signed memorandum of understanding
Signed formal contract
Signed and pending to be
effective
Newly effective contract/Backlog
Commencement of project
Received advance payment from project
owner
Effective
Revenue recognized to completion
As at Jun 30 2013, signed contracts pending to be
effective was USD11.8bn
Newly effective contract value was USD1.2bn in H113.
As at Jun 30 2013, the backlog value was USD7.1bn
As at Jun 30 2013, receipt in advance was
Rmb9.2bn
Initiation of Coverage: China Machinery Engineering Corporation 14 February 2014 40
Figure 89: Engineering contracting industry chain
Source: Company data
Planning
• Positioning the local industry development of the project, and planning for the industrial structure, spatial layout, impact of economic and social environment etc.
Consulting
• Providing consulting service of engineering construction project decisions and management to government departments, project owners and other types of customers, including early project proposal consultation, survey and design consultation, issuing investment project feasibility study report etc.
Design
• Comprehensive analysis of the conditions of technology and resources required for the construction of the project, prepare the project design documents, and provide related services which includes schematic design and technical design etc.
Procurement
• Engagement of subcontractor and selection of suitable suppliers• Collecting and procuring construction materials, production facilities and equipments required
for the construction of the project• Following up on the entire procurement process
Construction
• Depending on specific project, carrying out new-build, expansion or alteration, which involve road paving, port reinforcing, infrastructure construction, installation of equipment and other related construction work
Maintenance/Operation
• Engineering maintenance includes testing and repairing for the completed projects and periodic maintenance
• Engineering operation includes the models of BOT, PFI, PPP etc., taking BOT as an example, this model means” Build-Operate-Transfer”, represents a concept of complete project financing, also called “Concessional financing”
EPC
CMEC
Sinohydro
CCCC/CRCC/CRG/CSCI
Initiation of Coverage: China Machinery Engineering Corporation 14 February 2014 41
Initiation of Coverage: China Machinery Engineering Corporation 14 February 2014 42
China Machinery Engineering Corporation (1829.HK)
Income statement (Rmbm) 12/10 12/11 12/12 12/13E % ch 12/14E % ch 12/15E 12/16E 12/17ERevenues 19,077 20,518 21,296 21,487 0.9 26,855 25.0 29,644 32,757 36,121Gross profit 2,942 3,659 3,732 3,852 3.2 4,877 26.6 5,295 5,684 6,164EBITDA (UBS) 1,567 2,210 2,140 2,262 5.7 2,894 27.9 3,113 3,278 3,514Depreciation & amortisation (41) (72) (99) (107) 8.1 (116) 8.9 (126) (135) (145)EBIT (UBS) 1,526 2,138 2,041 2,155 5.6 2,778 28.9 2,987 3,143 3,369Associates & investment income 0 0 0 0 0.0 0 - 0 0 0Other non-operating income 19 10 12 12 0.0 12 0.0 12 12 12Net interest 358 348 550 760 38.0 795 4.6 862 934 1,010Exceptionals (incl goodwill) (342) (508) 12 (326) - 5 - 5 5 5Profit before tax 1,561 1,987 2,616 2,601 -0.6 3,590 38.0 3,866 4,094 4,397Tax (429) (515) (688) (650) 5.5 (897) -38.0 (967) (1,023) (1,099)Profit after tax 1,132 1,472 1,928 1,950 1.2 2,692 38.0 2,900 3,070 3,298Preference dividends and Minorities 4 3 0 0 0.0 0 0.0 0 0 0Extraordinary items 0 0 0 0 - 0 - 0 0 0Net earnings (local GAAP) 1,136 1,475 1,928 1,950 1.2 2,692 38.0 2,899 3,070 3,297Net earnings (UBS) 1,385 1,851 1,918 2,194 14.4 2,688 22.5 2,895 3,066 3,293Tax rate (%) 27.5 25.9 26.3 25.0 -4.9 25.0 0.0 25.0 25.0 25.0
Per share (Rmb) 12/10 12/11 12/12 12/13E % ch 12/14E % ch 12/15E 12/16E 12/17EEPS (UBS, diluted) 0.42 0.56 0.58 0.53 -7.9 0.65 22.5 0.70 0.74 0.80EPS (local GAAP, diluted) 0.34 0.45 0.58 0.47 -18.6 0.65 38.0 0.70 0.74 0.80EPS (UBS, basic) 0.42 0.56 0.58 0.53 -7.9 0.65 22.5 0.70 0.74 0.80Net DPS (Rmb) 0.21 0.11 0.20 0.17 -18.6 0.23 38.0 0.25 0.26 0.28Book value per share 1.20 1.63 2.47 2.82 14.4 3.31 17.2 3.79 4.28 4.82Average shares (diluted) 3,300.00 3,300.00 3,321.64 4,125.40 24.2 4,125.70 0.0 4,125.70 4,125.70 4,125.70
Balance sheet (Rmbm) 12/10 12/11 12/12 12/13E % ch 12/14E % ch 12/15E 12/16E 12/17ECash and equivalents 5,079 5,171 12,089 12,145 0.5 11,329 -6.7 12,431 13,483 14,571Other current assets 13,541 14,160 15,847 15,259 -3.7 16,765 9.9 17,574 18,473 19,441Total current assets 18,620 19,331 27,936 27,404 -1.9 28,094 2.5 30,005 31,956 34,012Net tangible fixed assets 345 392 444 478 7.6 503 5.1 517 523 519Net intangible fixed assets 112 1,668 1,851 1,912 3.3 1,973 3.2 2,034 2,096 2,157Investments / other assets 6,311 5,218 4,539 4,664 2.8 6,475 38.8 7,334 8,300 9,338Total assets 25,388 26,608 34,770 34,459 -0.9 37,044 7.5 39,891 42,875 46,026Trade payables & other ST liabilities 18,870 20,337 24,137 22,143 -8.3 22,719 2.6 23,608 24,537 25,464Short term debt 576 160 134 134 0.00 134 0.00 134 134 134Total current liabilities 19,446 20,497 24,271 22,277 -8.2 22,853 2.6 23,742 24,670 25,598Long term debt 1,260 226 155 105 -32.3 105 0.0 105 105 105Other long term liabilities 717 512 427 427 0.0 427 0.0 427 427 427Preferred shares 0 0 0 0 - 0 - 0 0 0Total liabilities (incl pref shares) 21,423 21,234 24,852 22,809 -8.2 23,385 2.5 24,274 25,202 26,130Common s/h equity 3,969 5,380 9,920 11,652 17.5 13,661 17.2 15,618 17,673 19,896Minority interests (4) (6) (3) (2) 16.2 (2) 19.3 (1) (1) (1)Total liabilities & equity 25,388 26,608 34,770 34,459 -0.9 37,044 7.5 39,891 42,875 46,026
Cash flow (Rmbm) 12/10 12/11 12/12 12/13E % ch 12/14E % ch 12/15E 12/16E 12/17ENet income (before pref divs) 1,136 1,475 1,928 1,950 1.2 2,692 38.0 2,899 3,070 3,297Depreciation & amortisation 41 72 99 107 8.1 116 8.9 126 135 145Net change in working capital 4,291 1,434 5,037 (1,531) - (2,741) -79.0 (779) (937) (1,078)Other operating 163 23 170 (9) - (9) -0.9 (9) (9) (9)Operating cash flow 5,631 3,003 7,234 516 -92.9 58 -88.7 2,237 2,259 2,355Tangible capital expenditure (16) (50) (98) (100) -2.5 (100) 0.0 (100) (100) (100)Intangible capital expenditure (6) (874) (211) (102) 51.7 (102) 0.0 (102) (102) (102)Net (acquisitions) / disposals 3 1 5 0 - 0 - 0 0 0Other investing (2,259) 195 (2,566) 10 - 10 - 10 10 10Investing cash flow (2,277) (728) (2,870) (192) 93.3 (192) 0.0 (192) (192) (192)Equity dividends paid (273) (698) (354) (675) -90.5 (682) -1.1 (942) (1,015) (1,074)Share issues / (buybacks) 0 0 3,012 457 -84.8 0 - 0 0 0Other financing 100 20 0 0 - 0 - 0 0 0Change in debt & pref shares (411) (1,432) (98) (50) 48.98 0 - 0 0 0Financing cash flow (583) (2,110) 2,560 (268) - (682) -154.5 (942) (1,015) (1,074)Cash flow inc/(dec) in cash 2,770 165 6,924 56 -99.2 (817) - 1,102 1,052 1,088FX / non cash items (45) (73) (5) 0 100.0 0 - 0 0 0Balance sheet inc/(dec) in cash 2,726 92 6,919 56 -99.2 (817) - 1,102 1,052 1,088Source: Company accounts, UBS estimates. (UBS) metrics use reported figures which have been adjusted by UBS analysts.
Initiation of Coverage: China Machinery Engineering Corporation 14 February 2014 43
China Machinery Engineering Corporation (1829.HK)
Valuation (x) 12/10 12/11 12/12 12/13E 12/14E 12/15E 12/16E 12/17EP/E (local GAAP, diluted) - - - 9.3 6.8 6.3 5.9 5.5P/E (UBS, diluted) - - - 8.3 6.8 6.3 5.9 5.5P/CEPS - - - 7.9 6.5 6.0 5.7 5.3Equity FCF (UBS) yield % - - - 2.3 (0.2) 11.7 11.8 12.4Net dividend yield (%) - - - 3.8 5.2 5.6 5.9 6.3P/BV x - - - 1.6 1.3 1.2 1.0 0.9EV/revenues (core) - - - 0.3 0.3 0.2 0.2 0.1EV/EBITDA (core) - - - 2.8 2.3 2.1 1.7 1.3EV/EBIT (core) - - - 2.9 2.4 2.2 1.8 1.3EV/OpFCF (core) - - - 2.9 2.4 2.2 1.7 1.3EV/op. invested capital - - - NM 4.4 2.0 1.3 0.8
Enterprise value (Rmbm) 12/10 12/11 12/12 12/13E 12/14E 12/15E 12/16E 12/17EMarket cap. - - - 18,199 18,224 18,224 18,224 18,224Net debt (cash) (1,667) (4,014) (8,293) (11,854) (11,499) (11,642) (12,719) (13,789)Buy out of minorities - - 4 3 2 2 1 1Pension provisions/other - - 0 0 0 0 0 0Total enterprise value - - - 6,348 6,728 6,584 5,507 4,436Non core assets (1) 0 0 0 0 0 0 0Core enterprise value - - - 6,348 6,727 6,584 5,507 4,436
Growth (%) 12/10 12/11 12/12 12/13E 12/14E 12/15E 12/16E 12/17ERevenue -1.1 7.6 3.8 0.9 25.0 10.4 10.5 10.3EBITDA (UBS) 158.1 41.0 -3.2 5.7 27.9 7.6 5.3 7.2EBIT (UBS) 167.7 40.1 -4.5 5.6 28.9 7.5 5.2 7.2EPS (UBS, diluted) 112.9 33.7 2.9 -7.9 22.5 7.7 5.9 7.4Net DPS 156.2 -49.3 89.3 -18.6 38.0 7.7 5.9 7.4
Margins & Profitability (%) 12/10 12/11 12/12 12/13E 12/14E 12/15E 12/16E 12/17EGross profit margin 15.4 17.8 17.5 17.9 18.2 17.9 17.4 17.1EBITDA margin 8.2 10.8 10.0 10.5 10.8 10.5 10.0 9.7EBIT margin 8.0 10.4 9.6 10.0 10.3 10.1 9.6 9.3Net earnings (UBS) margin 7.3 9.0 9.0 10.2 10.0 9.8 9.4 9.1ROIC (EBIT) 68.0 205.3 <-500 (305.6) 182.6 88.9 73.2 62.9ROIC post tax 49.3 NM NM NM NM 66.6 54.9 47.1ROE (UBS) 39.6 39.6 25.1 20.3 21.2 19.8 18.4 17.5
Capital structure & Coverage (x) 12/10 12/11 12/12 12/13E 12/14E 12/15E 12/16E 12/17ENet debt / EBITDA NM NM NM NM NM NM NM NMNet debt / total equity (81.8) (89.0) NM NM (81.2) (78.1) (74.9) (72.0)Net debt / (net debt + total equity) NM NM NM NM NM NM NM NMNet debt/EV - - - NM NM NM NM NMCapex / depreciation % 43.0 99.8 161.5 146.2 128.4 114.4 103.2 94.0Capex / revenue % 0.1 0.2 0.5 0.5 0.4 0.3 0.3 0.3EBIT / net interest NM NM NM NM NM NM NM NMDividend cover (UBS) 2.0 5.2 2.8 3.2 2.9 2.9 2.9 2.9Div. payout ratio (UBS) % 50.4 19.1 35.2 31.1 35.1 35.0 35.0 35.0
Revenues by division (Rmbm) 12/10 12/11 12/12 12/13E 12/14E 12/15E 12/16E 12/17EOthers 19,077 20,518 21,296 21,487 26,855 29,644 32,757 36,121Total 19,077 20,518 21,296 21,487 26,855 29,644 32,757 36,121
EBIT (UBS) by division (Rmbm) 12/10 12/11 12/12 12/13E 12/14E 12/15E 12/16E 12/17EOthers 1,526 2,138 2,041 2,155 2,778 2,987 3,143 3,369Total 1,526 2,138 2,041 2,155 2,778 2,987 3,143 3,369Source: Company accounts, UBS estimates. (UBS) metrics use reported figures which have been adjusted by UBS analysts.
Initiation of Coverage: China Machinery Engineering Corporation 14 February 2014 44
Forecast returns
Forecast price appreciation +43.4%
Forecast dividend yield 5.2%
Forecast stock return +48.6%
Market return assumption 9.6%
Forecast excess return +39.0%
Statement of Risk
We see major industry related risk being slow down of global infrastructure spending, Renminbi appreciation and overseas regulatory risks. Key company specific risk is competition from Chinese peers (especially sister company CAMEC).
Initiation of Coverage: China Machinery Engineering Corporation 14 February 2014 45
Required Disclosures
This report has been prepared by UBS Securities Co. Limited, an affiliate of UBS AG. UBS AG, its subsidiaries, branches and affiliates are referred to herein as UBS.
For information on the ways in which UBS manages conflicts and maintains independence of its research product; historical performance information; and certain additional disclosures concerning UBS research recommendations, please visit www.ubs.com/disclosures. The figures contained in performance charts refer to the past; past performance is not a reliable indicator of future results. Additional information will be made available upon request. UBS Securities Co. Limited is licensed to conduct securities investment consultancy businesses by the China Securities Regulatory Commission.
Analyst Certification: Each research analyst primarily responsible for the content of this research report, in whole or in part, certifies that with respect to each security or issuer that the analyst covered in this report: (1) all of the views expressed accurately reflect his or her personal views about those securities or issuers and were prepared in an independent manner, including with respect to UBS, and (2) no part of his or her compensation was, is, or will be, directly or indirectly, related to the specific recommendations or views expressed by that research analyst in the research report.
UBS Investment Research: Global Equity Rating Definitions
UBS 12-Month Rating
Definition Coverage1IB Services2
Buy FSR is > 6% above the MRA. 44% 36% Neutral FSR is between -6% and 6% of the MRA. 45% 35% Sell FSR is > 6% below the MRA. 11% 23% UBS Short-Term Rating
Definition Coverage3IB Services4
Buy Stock price expected to rise within three months from the time the rating was assigned because of a specific catalyst or event.
less than 1%
less than 1%
Sell Stock price expected to fall within three months from the time the rating was assigned because of a specific catalyst or event.
less than 1%
less than 1%
Source: UBS. Rating allocations are as of 31 December 2013. 1:Percentage of companies under coverage globally within the 12-month rating category. 2:Percentage of companies within the 12-month rating category for which investment banking (IB) services were provided within the past 12 months. 3:Percentage of companies under coverage globally within the Short-Term rating category. 4:Percentage of companies within the Short-Term rating category for which investment banking (IB) services were provided within the past 12 months.
KEY DEFINITIONS: Forecast Stock Return (FSR) is defined as expected percentage price appreciation plus gross dividend yield over the next 12 months. Market Return Assumption (MRA) is defined as the one-year local market interest rate plus 5% (a proxy for, and not a forecast of, the equity risk premium). Under Review (UR) Stocks may be flagged as UR by the analyst, indicating that the stock's price target and/or rating are subject to possible change in the near term, usually in response to an event that may affect the investment case or valuation. Short-Term Ratings reflect the expected near-term (up to three months) performance of the stock and do not reflect any change in the fundamental view or investment case. Equity Price Targets have an investment horizon of 12 months.
EXCEPTIONS AND SPECIAL CASES: UK and European Investment Fund ratings and definitions are: Buy: Positive on factors such as structure, management, performance record, discount; Neutral: Neutral on factors such as structure, management, performance record, discount; Sell: Negative on factors such as structure, management, performance record, discount. Core Banding Exceptions (CBE): Exceptions to the standard +/-6% bands may be granted by the Investment Review Committee (IRC). Factors considered by the IRC include the stock's volatility and the credit spread of the respective company's debt. As a result, stocks deemed to be very high or low risk may be subject to higher or lower bands as they relate to the rating. When such exceptions apply, they will be identified in the Company Disclosures table in the relevant research piece.
Research analysts contributing to this report who are employed by any non-US affiliate of UBS Securities LLC are not registered/qualified as research analysts with the NASD and NYSE and therefore are not subject to the restrictions contained in the NASD and NYSE rules on communications with a subject company, public appearances, and trading securities held by a research analyst account. The name of each affiliate and analyst employed by that affiliate contributing to this report, if any, follows.
UBS Securities Co. Limited: Robin Xu.
Initiation of Coverage: China Machinery Engineering Corporation 14 February 2014 46
Company Disclosures
Company Name Reuters 12-month rating Short-term rating Price Price date
China Machinery Engineering Corporation 1829.HK Not Rated N/A HK$5.65 13 Feb 2014
Source: UBS. All prices as of local market close. Ratings in this table are the most current published ratings prior to this report. They may be more recent than the stock pricing date
Unless otherwise indicated, please refer to the Valuation and Risk sections within the body of this report.
China Machinery Engineering Corporation (HK$)
01
-Jan
-09
01
-Ap
r-0
9
01
-Ju
l-0
9
01
-Oct
-09
01
-Jan
-10
01
-Ap
r-1
0
01
-Ju
l-1
0
01
-Oct
-10
01
-Jan
-11
01
-Ap
r-1
1
01
-Ju
l-1
1
01
-Oct
-11
01
-Jan
-12
01
-Ap
r-1
2
01
-Ju
l-1
2
01
-Oct
-12
01
-Jan
-13
01
-Ap
r-1
3
01
-Ju
l-1
3
01
-Oct
-13
01
-Jan
-14
0.00
2.00
4.00
6.00
8.00
Price Target (HK$) Stock Price (HK$)
No Rating
Source: UBS; as of 13 Feb 2014
Initiation of Coverage: China Machinery Engineering Corporation 14 February 2014 47
Global Disclaimer This document has been prepared by UBS Securities Co. Limited, an affiliate of UBS AG. UBS AG, its subsidiaries, branches and affiliates are referred to herein as UBS.
This document is for distribution only as may be permitted by law. It is not directed to, or intended for distribution to or use by, any person or entity who is a citizen or resident of or located in any locality, state, country or other jurisdiction where such distribution, publication, availability or use would be contrary to law or regulation or would subject UBS to any registration or licensing requirement within such jurisdiction. It is published solely for information purposes; it is not an advertisement nor is it a solicitation or an offer to buy or sell any financial instruments or to participate in any particular trading strategy. No representation or warranty, either express or implied, is provided in relation to the accuracy, completeness or reliability of the information contained in this document (‘the Information’), except with respect to Information concerning UBS. The Information is not intended to be a complete statement or summary of the securities, markets or developments referred to in the document. UBS does not undertake to update or keep current the Information. Any opinions expressed in this document may change without notice and may differ or be contrary to opinions expressed by other business areas or groups of UBS. Any statements contained in this report attributed to a third party represent UBS's interpretation of the data, information and/or opinions provided by that third party either publicly or through a subscription service, and such use and interpretation have not been reviewed by the third party.
Nothing in this document constitutes a representation that any investment strategy or recommendation is suitable or appropriate to an investor’s individual circumstances or otherwise constitutes a personal recommendation. Investments involve risks, and investors should exercise prudence and their own judgement in making their investment decisions. The financial instruments described in the document may not be eligible for sale in all jurisdictions or to certain categories of investors. Options, derivative products and futures are not suitable for all investors, and trading in these instruments is considered risky. Mortgage and asset-backed securities may involve a high degree of risk and may be highly volatile in response to fluctuations in interest rates or other market conditions. Foreign currency rates of exchange may adversely affect the value, price or income of any security or related instrument referred to in the document. For investment advice, trade execution or other enquiries, clients should contact their local sales representative.
The value of any investment or income may go down as well as up, and investors may not get back the full amount invested. Past performance is not necessarily a guide to future performance. Neither UBS nor any of its directors, employees or agents accepts any liability for any loss (including investment loss) or damage arising out of the use of all or any of the Information.
Any prices stated in this document are for information purposes only and do not represent valuations for individual securities or other financial instruments. There is no representation that any transaction can or could have been effected at those prices, and any prices do not necessarily reflect UBS's internal books and records or theoretical model-based valuations and may be based on certain assumptions. Different assumptions by UBS or any other source may yield substantially different results.
Research will initiate, update and cease coverage solely at the discretion of UBS Investment Bank Research Management. The analysis contained in this document is based on numerous assumptions. Different assumptions could result in materially different results. The analyst(s) responsible for the preparation of this document may interact with trading desk personnel, sales personnel and other parties for the purpose of gathering, applying and interpreting market information. UBS relies on information barriers to control the flow of information contained in one or more areas within UBS into other areas, units, groups or affiliates of UBS. The compensation of the analyst who prepared this document is determined exclusively by research management and senior management (not including investment banking). Analyst compensation is not based on investment banking revenues; however, compensation may relate to the revenues of UBS Investment Bank as a whole, of which investment banking, sales and trading are a part.
For financial instruments admitted to trading on an EU regulated market: UBS AG, its affiliates or subsidiaries (excluding UBS Securities LLC) acts as a market maker or liquidity provider (in accordance with the interpretation of these terms in the UK) in the financial instruments of the issuer save that where the activity of liquidity provider is carried out in accordance with the definition given to it by the laws and regulations of any other EU jurisdictions, such information is separately disclosed in this document. For financial instruments admitted to trading on a non-EU regulated market: UBS may act as a market maker save that where this activity is carried out in the US in accordance with the definition given to it by the relevant laws and regulations, such activity will be specifically disclosed in this document. UBS may have issued a warrant the value of which is based on one or more of the financial instruments referred to in the document. UBS and its affiliates and employees may have long or short positions, trade as principal and buy and sell in instruments or derivatives identified herein; such transactions or positions may be inconsistent with the opinions expressed in this document.
Initiation of Coverage: China Machinery Engineering Corporation 14 February 2014 48
United Kingdom and the rest of Europe: Except as otherwise specified herein, this material is distributed by UBS Limited to persons who are eligible counterparties or professional clients. UBS Limited is authorised by the Prudential Regulation Authority and regulated by the Financial Conduct Authority and the Prudential Regulation Authority. France: Prepared by UBS Limited and distributed by UBS Limited and UBS Securities France S.A. UBS Securities France S.A. is regulated by the ACP (Autorité de Contrôle Prudentiel) and the Autorité des Marchés Financiers (AMF). Where an analyst of UBS Securities France S.A. has contributed to this document, the document is also deemed to have been prepared by UBS Securities France S.A. Germany: Prepared by UBS Limited and distributed by UBS Limited and UBS Deutschland AG. UBS Deutschland AG is regulated by the Bundesanstalt fur Finanzdienstleistungsaufsicht (BaFin). Spain: Prepared by UBS Limited and distributed by UBS Limited and UBS Securities España SV, SA. UBS Securities España SV, SA is regulated by the Comisión Nacional del Mercado de Valores (CNMV). Turkey: Distributed by UBS Limited. No information in this document is provided for the purpose of offering, marketing and sale by any means of any capital market instruments and services in the Republic of Turkey. Therefore, this document may not be considered as an offer made or to be made to residents of the Republic of Turkey. UBS AG is not licensed by the Turkish Capital Market Board under the provisions of the Capital Market Law (Law No. 6362). Accordingly, neither this document nor any other offering material related to the instruments/services may be utilized in connection with providing any capital market services to persons within the Republic of Turkey without the prior approval of the Capital Market Board. However, according to article 15 (d) (ii) of the Decree No. 32, there is no restriction on the purchase or sale of the securities abroad by residents of the Republic of Turkey. Poland: Distributed by UBS Limited (spolka z ograniczona odpowiedzialnoscia) Oddzial w Polsce. Russia: Prepared and distributed by UBS Securities CJSC. Switzerland: Distributed by UBS AG to persons who are institutional investors only. Italy: Prepared by UBS Limited and distributed by UBS Limited and UBS Italia Sim S.p.A. UBS Italia Sim S.p.A. is regulated by the Bank of Italy and by the Commissione Nazionale per le Società e la Borsa (CONSOB). Where an analyst of UBS Italia Sim S.p.A. has contributed to this document, the document is also deemed to have been prepared by UBS Italia Sim S.p.A. South Africa: Distributed by UBS South Africa (Pty) Limited, an authorised user of the JSE and an authorised Financial Services Provider. Israel: This material is distributed by UBS Limited. UBS Limited is authorised by the Prudential Regulation Authority and regulated by the Financial Conduct Authority and the Prudential Regulation Authority. UBS Securities Israel Ltd is a licensed Investment Marketer that is supervised by the Israel Securities Authority (ISA). UBS Limited and its affiliates incorporated outside Israel are not licensed under the Israeli Advisory Law. This Material is being issued only to and/or is directed only at persons who are Qualified Investors within the meaning of the Israeli Advisory Law, and this material must not be relied on or acted upon by any other persons. Saudi Arabia: This document has been issued by UBS AG (and/or any of its subsidiaries, branches or affiliates), a public company limited by shares, incorporated in Switzerland with its registered offices at Aeschenvorstadt 1, CH-4051 Basel and Bahnhofstrasse 45, CH-8001 Zurich. This publication has been approved by UBS Saudi Arabia (a subsidiary of UBS AG), a Saudi closed joint stock company incorporated in the Kingdom of Saudi Arabia under commercial register number 1010257812 having its registered office at Tatweer Towers, P.O. Box 75724, Riyadh 11588, Kingdom of Saudi Arabia. UBS Saudi Arabia is authorized and regulated by the Capital Market Authority to conduct securities business under license number 08113-37. United States: Distributed to US persons by either UBS Securities LLC or by UBS Financial Services Inc., subsidiaries of UBS AG; or by a group, subsidiary or affiliate of UBS AG that is not registered as a US broker-dealer (a ‘non-US affiliate’ ) to major US institutional investors only. UBS Securities LLC or UBS Financial Services Inc. accepts responsibility for the content of a document prepared by another non-US affiliate when distributed to US persons by UBS Securities LLC or UBS Financial Services Inc. All transactions by a US person in the securities mentioned in this document must be effected through UBS Securities LLC or UBS Financial Services Inc., and not through a non-US affiliate. Canada: Distributed by UBS Securities Canada Inc., a registered investment dealer in Canada and a Member-Canadian Investor Protection Fund, or by another affiliate of UBS AG that is registered to conduct business in Canada or is otherwise exempt from registration. Brazil: Except as otherwise specified herein, this material is prepared by UBS Brasil CCTVM S.A. to persons who are eligible investors residing in Brazil, which are considered to be: (i) financial institutions, (ii) insurance firms and investment capital companies, (iii) supplementary pension entities, (iv) entities that hold financial investments higher than R$300,000.00 and that confirm the status of qualified investors in written, (v) investment funds, (vi) securities portfolio managers and securities consultants duly authorized by Comissão de Valores Mobiliários (CVM), regarding their own investments, and (vii) social security systems created by the Federal Government, States, and Municipalities. Hong Kong: Distributed by UBS Securities Asia Limited. Singapore: Distributed by UBS Securities Pte. Ltd. [mica (p) 107/09/2013 and Co. Reg. No.: 198500648C] or UBS AG, Singapore Branch. Please contact UBS Securities Pte. Ltd., an exempt financial adviser under the Singapore Financial Advisers Act (Cap. 110); or UBS AG, Singapore Branch, an exempt financial adviser under the Singapore Financial Advisers Act (Cap. 110) and a wholesale bank licensed under the Singapore Banking Act (Cap. 19) regulated by the Monetary Authority of Singapore, in respect of any matters arising from, or in connection with, the analysis or document. The recipients of this document represent and warrant that they are accredited and institutional investors as defined in the Securities and Futures Act (Cap. 289). Japan: Distributed by UBS Securities Japan Co., Ltd. to institutional investors only. Where this document has been prepared by UBS Securities Japan Co., Ltd., UBS Securities Japan Co., Ltd. is the author, publisher and distributor of the document. Distributed by UBS AG, Tokyo Branch to Professional Investors (except as otherwise permitted) in relation to foreign exchange and other banking businesses when relevant. Australia: 1) Distributed by UBS AG (Holder of Australian Financial Services License No. 231087) and/or UBS Securities Australia Ltd (Holder of Australian Financial Services License No. 231098). The Information in this document has been prepared without taking into account any investor’s objectives, financial situation or needs, and investors should, before acting on the Information, consider the appropriateness of the Information, having regard to their objectives, financial situation and needs. If the Information contained in this document relates to the acquisition, or potential acquisition of a particular financial product by a ‘Retail’ client as defined by section 761G of the Corporations Act 2001 where a Product Disclosure Statement would be required, the retail client should obtain and consider the Product Disclosure Statement relating to the product before making any decision about whether to acquire the product. 2) Clients of UBS Wealth Management Australia Ltd: This notice is distributed to clients of UBS Wealth Management Australia Ltd ABN 50 005 311 937 (Holder of Australian Financial Services Licence No. 231127), Chifley Tower, 2 Chifley Square, Sydney, New South Wales, NSW 2000, by UBS Wealth Management Australia Ltd. This Document contains general information and/or general advice only and does not constitute personal financial product advice. As such the content of the Document was prepared without taking into account the objectives, financial situation or needs of any specific recipient. Prior to making any investment decision, a recipient should obtain personal financial product advice from an independent adviser and consider any relevant offer documents (including any product disclosure statement) where the acquisition of financial products is being considered. UBS AG is authorised to provide financial product advice in relation to foreign exchange contracts in Australia, and as such UBS AG is responsible for all general advice on foreign exchange and currencies contained herein. New Zealand: Distributed by UBS New Zealand Ltd. The information and recommendations in this publication are provided for general information purposes only. To the extent that any such information or recommendations constitute financial advice, they do not take into account any person’s particular financial situation or goals. We recommend that recipients seek advice specific to their circumstances from their financial advisor. Dubai: The research distributed by UBS AG Dubai Branch is intended for Professional Clients only and is not for further distribution within the United Arab Emirates. Korea: Distributed in Korea by UBS Securities Pte. Ltd., Seoul Branch. This document may have been edited or contributed to from time to time by affiliates of UBS Securities Pte. Ltd., Seoul Branch. Malaysia: This material is authorized to be distributed in Malaysia by UBS Securities Malaysia Sdn. Bhd (253825-x). India: Prepared by UBS Securities India Private Ltd. 2/F, 2 North Avenue, Maker Maxity, Bandra Kurla Complex, Bandra (East), Mumbai (India) 400051. Phone: +912261556000 SEBI Registration Numbers: NSE (Capital Market Segment): INB230951431, NSE (F&O Segment) INF230951431, BSE (Capital Market Segment) INB010951437.
The disclosures contained in research documents produced by UBS Limited shall be governed by and construed in accordance with English law.
UBS specifically prohibits the redistribution of this document in whole or in part without the written permission of UBS and UBS accepts no liability whatsoever for the actions of third parties in this respect. Images may depict objects or elements that are protected by third party copyright, trademarks and other intellectual property rights. © UBS 2014. The key symbol and UBS are among the registered and unregistered trademarks of UBS. All rights reserved.