Upload
davin-whitenton
View
221
Download
1
Tags:
Embed Size (px)
Citation preview
Initial Provisioning (Spare parts Management)
04/10/231
AIRCRAFT MAINTENANCE
Section 6
“Plan your work and then work your plan.”
04/10/232
Production Planning and Control
Production Planning and ControlProduction planning and control (PP&C) is one
of the key organizations within M&E. It is the heart of the maintenance organization.
The PP&C organization is primarily responsible for planning and scheduling all aircraft maintenance activity within the airline.
Actually PP&C has three primarily functions: forecasting, planning and control.
04/10/233
Forecasting
Forecasting activities include the estimated maintenance workload for the long term and the short term based on the existing fleet and business plans and on any known changes in these for the forecast period.
Forecasting is concerned with the future workload of the M&E organization. It must take into account the routine maintenance requirements as well as all planned changes in the future operations relative to maintenance.
Any changes in fleet size and make up, changes in route structure, and changes in facilities, manpower, and skill requirements must be tracked.
Future plans must also accommodate aging and replacement of equipment, adding new equipment, and the planned incorporation of ADs and SBs.
04/10/234
Forecasting
Forecasts are usually made for the long and short term but often an intermediate term forecast is also made.
- Short-term forecasts are more detailed and usually
cover 1-2 years. These forecasts contain more definitive
plans with attention to actual manpower and budget
numbers. - Long-term. Larger airlines may also develop intermediate
forecasts for periods of 2 to 5 years.
04/10/235
Production Planning & ControlsPlanning involves the scheduling of upcoming
maintenance and includes the planning and scheduling of all manpower, parts, facilities, and time frame requirements for such maintenance: less than “A” check items, daily checks, 48-hour checks, transit checks, and letter checks (A, B, C, etc.).
These plans would include incorporation of SBs, SLs, and ADs as well as other modifications deemed necessary by the airline.
Coordination with flight operations and with ground handling and support activities is also included in the planning effort.
04/10/236
Feedback for planning
- What the planners need to know to adjust future plans are the following:1. The amount of time required to perform each task2. The amount of time lost in waiting for delivery of parts
and supplies3. The down time for unusual circumstances4. The additional time required for non-routine findings5. The variation in manpower availability6. Lost time due to parts robbing from other jobs (or from
the aircraft in check)
04/10/237
The need of Spares
10/04/238
An airline sells speed safety and regularityAn aircraft is a highly complex deviceIt is expected to operate at 99% + Technical
regularityIt is expected to fly up to 15 hours per day and
sometimes even moreIt is expected to fly 4000 hours per yearWithout a readily available stock of spares
these targets will not be metA two hours delay costs around 4000$. A
cancellation around 16,000$
Plus The damage to a company’s image
Reliability / Consumption Data
10/04/239
MTBF : Mean Time Between Failure
MTBUR : Mean Time Between Unscheduled removals
TAT : Turn Around Time
[Time in days from equipment failure to it being available, serviceable again to the airline]
MTBF = Number of Hard failures
Number of equipment hours flown
MTBUR = Number of removals of equipment considered faulty Number of equipment hours flown
In a given Fleet
Sources of Spares
10/04/2310
From the aircraft manufacturerOne stop shoppingGood pressure on suppliersReduced administration loadEquipment matches the aircraftMake up charged
From the equipment supplierNegotiate special dealsNo mark upHeavy administration
10/04/2311
From second hand dealersLow pricesImmediate availabilityDoubts on historyMay need early overhaul
Pooling SchemesReduced capital investmentPay from cash flowPossible availability problems
Sources of Spares
Different types of Spares
10/04/2312
No-Go Essential to be operational for the aircraft to
be dispatched
Go-If Can be failed and the aircraft allowed to be
dispatched if some reservations are met
Go Can be failed and the aircraft can be dispatched.
To be changed or repaired at the first
(sometimes defined) opportunity
Typical Figures for Spares Potential
10/04/2313
A320 Example :
Number of removable part numbers25000
Number of structure part numbers 15000Number of standard part numbers 9000Number of equipment part numbers
1100
How can Initial ProvisioningCost be reduced?
10/04/2314
Lease spares Join pool scheme as a user only Purchase only as need arises Spares included in a larger support scheme from a third
part or airline service provider
CASH FLOW
Pooling
10/04/2315
Basic principle is to take advantage of scale effects. The larger the fleet the smaller the expenditure per aircraft on spares becomes. Members contribute spares or capital
However at about 20 aircraft the effect begin to become less noticeable
Demand is random and so the pool may empty a particular time
Not all prospective candidates are welcome in a pool
Costs may be high. 1/365 of book value per day is common and this may be higher for longer leases by occasional users
Repair costs are to be added
Lease and Exchange Schemes
10/04/2316
Spares are leased against a fixed percentage of their cost in much the same way as are aircraft. However, because of the higher risk and administration load, required rates are higher. -1.6% - 1.7% - per month is normal
At the end of the lease the equipment does not belong to the airline
Instead of repairing and item a serviceable unit is given in exchange
The exchange unit may be newer or older than that for which it is exchanged. There may be cash/cost adjustments
Maybe difficult in some areas of the world due to extra customs charges
Lease Schemes
Exchange Schemes
Package Schemes
10/04/2317
The major players – big airlines, airframe manufactures and engine companies are looking at spares repair and leasing packages. A “spares by the hour” approach
User would pay a fixed or pre-determinable fee ensuring replacement of failed items by serviceable ones
Main Advantage areReduced capital expenditureEasier budgetingReduced administrationReduced risk from random need for sparesSometimes attached to an overall support scheme,
particularly by airlines – “Big Brother”
Non availability of Spares
10/04/2318
Loss of serviceExtension of overhaul downtimesCost of spares loaned or purchased
hurriedlyLease of aircraftDamage to company image
A.O.G. System
10/04/2319
Literally it means the aircraft cannot operate because of damage or an equipment failure
Often used when the aircraft is close to such a condition
The manufacturer is expected to react within a minimum period of time to advise of and take action
It costs much more than normal shippingIt occasionally carries a surchargeIts abuse costs the industry a lot of money – The
innocent pay for the guilty
A.O.G. Aircraft On Ground
Parts and Materials InformationApproved parts is one that meets approved
design data applicable to the part and having been manufactured and subsequently maintained in accordance with the requirements of the State of Design, Manufacture or Registry, as applicable.
Standard parts are approved parts conforming to national or industry accepted standard.
Parts and material acceptance: The process of evaluating parts and material for acceptance involves establishing that the part/material is authentic, conforms to the relevant type design, customers order, physical state and accompanying release documents.
04/10/2320
Parts and Materials InformationUnapproved Parts: These are parts that
do not meet the criteria, they also include parts improperly returned to service.
Original Equipment Manufacturer (OEM) parts
OEMs are the primary source of approved parts
04/10/2321
Parts Manufacturer Approval (PMA)Parts Manufacturer Approval (PMA) is a
combined design and production approval for modification and replacement articles. It allows a manufacturer to produce and sell these articles for installation on type certificated products.
FAA Orders 8110.42 and 8120.2 prescribe the approval procedures for FAA personnel and guides applicants in the approval process.
04/10/2322
OEM vs PMA
Compatibility, Price and AvailabilityCustomer BasesThe AirlinesThe Cargo CarriersThe MilitaryThe Commercial and Business OperatorsThe GA Community
04/10/2323
OEM vs PMA
The Battle Wages OnThe war between the PMAs and the OEMs is
a heated one. And even though there seems to be revenue enough to go around today, more contenders and products enter the market every year, causing everyone to worry about their own market share. Ironically, there are even some cases of combatants defecting.
04/10/2324
Approved technical stores
Approved technical stores comprise of Quarantine and Bonded stores.
Quarantine stores Quarantine Store - Incoming: Provide
storage for incoming material and parts. Quarantine store – Unserviceable: Provide
storage for parts and material awaiting investigation and dispatch for repair.
Bonded stores Bonded store: Provide storage of parts and
material that have been proved authentic.
04/10/2325
Approved Technical Stores The approved technical stores will be
contained in the user manual which could be a stand alone document or part of the GMM/TPPM/MPM / MCM and will address the following:a ) Quarantine and Bonded stores;
b) Incoming and outgoing inspections;
c) Shelf/storage life;
d) Records control;
e) Parts identification ( markings);
f) Storage of instruments, tools, rubber items etc;
g) Segregation of parts and materials in the bonded store;
h) Storage facility;
i) Special storage. 04/10/2326
Parts and Material Authenticity EvaluationInvolves establishing that the parts and material
conforms to approved design specifications, and have retained the essential properties assumed in the design as qualified by the supporting documents.
Information on the supporting documents shall include the following: a) The authority under which they are issued; b) Reference identification for the purposes of traceability; c) Name, address and approval reference of the issuing organization;
04/10/2327
Parts and Material Authenticity Evaluation
d) Work order, contract or invoice number; e) Quantity, description, part numbers and, if applicable, serial numbers of the parts; f) Relevant information concerning any shelf life limitations, special storage condition requirements, compliance or non-compliance with any airworthiness directives, etc; g) The signature and approval reference of the person issuing the document; and h) Whether the part is new or used.
04/10/2328
Materialsand
PartsManageme
nt
04/10/2329
Tags
04/10/2330
More Details
More information please going through “Aviation Maintenance Management, chapter 16 Materiel Support” by Harry A. Kinnison, Ph.D.
or Any questions please contact
04/10/2331
04/10/2332