IndustrialFloor and Wall Protective Coatings Systems

888.732.1270

CrownAccent ™

Products 328A “Stained Look” Surface That Lasts!

Recommended Use: When a stain appearanceis desired CrownAccent enhances the floor surface with extremely long wear resistance for commercial, institutional and residential environments.

System Description: A translucent polymerthat stains the cement and highlights the exposed aggregate. Creates a stylish fashion-forward appearance that is durable, attractive, economicaland easy to clean. Expect years of service. Easy to refinish and made to look new again.

Safety and Hygiene: Antimicrobial Crown-Silver ™ provides sanitary protection usingsilver-ion technology to control the growthof bacteria and fungi on floor surfaces. It isrecommended that CrownSilver™ be added toall CrownCrete™overlays and top coats whenthese conditions exist.

Recommended Use: CrownCrete™ floorsystems are ideal for use in indoor andoutdoor environments including industrial,manufacturing, packaging, warehousefacilities and shipping docks.

Fast Turn-Around: CrownCrete™providesextremely fast turn-around due to its rapidplacement characteristics and fast cure.In addition, the physical and adhesionproperties of CrownCrete™ exceedthose of conventional concrete.

Crown Exclusives:CrownSpatter & CrownCove

High Performance Polymer FloorOverlays With A Decorative Appearance

Learn What’s NewIn Crown Polymers

Product Innovations.

For More Information, Call Today!For M

CrownCrete E™

Fast turn around, seamless polymer concrete resurfacing overlays.

Safety and HygieneAntimicrobial CrownSilver ™provides sanitaryprotection using silver-ion technology to con-trol the growth of bacteria and fungi on floor and wall surfaces. It is recommended thatCrownSilver be added to all CrownCrete overlays and top coats when these conditionsexist.

™™

Where to UseCrownCrete™ floor systems are idealfor use in indoor and outdoor environmentsincluding meat, poultry, dairy, beverage andpharmaceutical processing plants in additionto processing and packaging facilities,commercial kitchens, freezers, coolers,warehouses and shipping docks.

Fast Turn-AroundCrownCrete™ provides extremely fastturn-around due to its rapid placementcharacteristics and fast cure. In addition,the physical and adhesion properties ofCrownCrete™ exceed those of conventionalconcrete.

System DescriptionCrownCrete E is a modified novolac epoxy polymer concrete resurfacing floor overlays areresistant to abrasion, impact, hot spillagesand chemicals common to the food industry.CrownCrete E is a durable enough to endurethermal shock, aggressive high pressuresteam cleaning, scrubbing and is ideal foruse wherever a sanitary environment is required.The material maybe applied as self-leveling or trowel system. A variety of surface finishes are available,ranging from smooth to various degrees of nonslip. Surface profiling can be tailored to individual environments.

™

Designed for meat, poultry, dairy, pharmaceutical beverage and food processing plants. Crown Polymers offers two type of Polymers-modified concrete overlays: CrownCrete E is modified novolac epoxy polymer concrete.CrownCrete U is a modified urethane polymer concrete.

System Description™CrownCrete U is a modified urethane concrete

system designed for high moisture areas, harshconditions with demanding environments. This polyurethane concrete resurfacing system is designed for high moisture areas andresistance to thermal shock. Urethane floors are formulated to withstand harsh and demanding environments. The material maybe applied as self-leveling or trowel system. It is the most desirable flooring system to be used in: food processing areas, production areas, bottling areas, cook/chill areas, commercial kitchens, pharmaceutical plants, wash areas, chemical processing areas, and loading/unloading vehicle areas.

CrownQuartz &CrownPro

CrownClear Epoxy™

Product 326

CrownPro™ 6,10 PolyureaProducts 333, 334

Wall SystemsStandard or Reinforced

CrownCote™

Product 401 Epoxy

CrownProCote™

Product 443 Polyurea

CrownFlake,™ CrownChips,™CrownHybrid,™ CrownBrindle™

Products SP632, 633, 644 & 645Create Those Special Atmospheres

Recommended Use:For concrete or wood or steel floors such as found in light manufacturing, production, storage, shipping, warehousingbalconies and ramps areas; laboratory, locker rooms, kitchens and eating areas, where abeautiful, durable, seamless surface is desirableon interior or outdoor uses.

System Description: The uniqueness of eachof these polymer overlays is the size andshape of the vinyl flakes within each system.They are available in four distinct mixtures,each with a different look designed to createa special mood within any environment.Standard and custom solid colors and blendsare available. Flakes are encapsulated in anepoxy base coat for superior adhesion. Topcoat options include epoxy, polyurethane orpolyurea. Durable safety walking surfacesexceed OSHA and ADA slip resistantrequirements.

concrete designed with colored quartzaggregate and top coated with an epoxy clearcoat or polyurea when UV resistance is required.Application methods include broadcast, slurry-broadcast, power or hand troweled. CrownQuartzcreates an industrial grade overlay with adecorative look. Useable on interior orexterior applications. Nearly no odor duringplacement with fast cure.

System Description: An epoxy polymer

CrownQuartz™

A Popular Industrial Floor

Recommended Use: For virtually any environ-ment including institutional, manufacturingor assembly. Excellent for dry or continualwet environments with medium traffic usage.Adjustable surface profiles.

email: info@crownpolymers.comwww.crownpolymers.com

Indicates a Crown Polymers Exclusive

CrownShield®

50, 40, 28 & 40-2Products 320, 321, 322, 323Best All Around Floor System

Recommended Use: Used in toughheavy-duty industrial and manufacturingapplications.

System Description: A family of high buildpigmented epoxy polymers designed for avariety of environmental exposures. Curableon substrate temperatures from 28°F – 110°F(-2°C – 43°C), speed of cure from 2–12 hours.Applied as thin coatings or thick epoxypolymer concrete overlays. The finished floorappearance can be a solid color or randomflaked. Ideal for applications where time isof the essence.

CrownShield® SLProduct 315A Crown Polymers Exclusive!

Recommended Use: Ideal for light to heavy-duty commercial or industrial concretesurfaces requiring releveling or a thickeroverlayment.

System Description: Self-leveling 1/8” or3/16” epoxy polymer concrete overlay thatbecomes a monolithic part of the concrete.A dense aggregate filled overlay withhigh physical strength properties designedfor interior or exterior use. The finishedappearance when left as a smooth surfacehas a high reflective gloss, or a reduced glosswhen textured. Add color flakes and a cleartop coat to change from a tough industrialsurface to a highly decorative finish.

CrownPro™SolventShieldProduct 351A High-Tech Protector

Recommended Use: For environmentswhere solvent resistance is desirable.

System Description:Two componentNovolac/aliphatic epoxy formula is a 100%solids, low odor, applied as a coating orepoxy polymer concrete that becomes a monolithicpart of the concrete. Also available as a ESD system.

CrownWear™20 EPC-LTCProduct 202Low Temp Cure Down To 20°F (-7°C)

Recommended Use: For freezers,cold storage or outdoor environments.

System Description: Two component,100% solids, epoxy polymer concrete.

CrownPro™AcidShieldProduct 350Superior Acid Protection

Recommended Use: For environmentswhere acid spills occur and acidresistance is desirable.

System Description: Two component,100% solids, low odor, novolac epoxycoating or epoxy polymer concrete.

CrownPro™EPC TempShieldProduct 356Protects Up To 450°F (232°C)

Recommended Use: Protects concrete andtile substrates from hot , dry or liquidenvironments and withstands thermal changes.Use where industrial protection is needed onfloors, drains and containment areas.

System Description: CrownPro EPCTempShield is an epoxy polymer concrete,100% solids, non-shrink, low odor duringapplication that becomes a monolithicpart of the clean concrete. It may betroweled on flat, graded or vertical surfaces.

Designed Specifically forIndustrial and CommercialFacilities

High Performance Protection forNew or Restored Concrete Floors

CrownPro™AcidShiecidShiecProduct 350

erior Acid Protection

ecommendeded d UsUsU e: For environronr mentststacid spillsspillsspill occur and acidnce isisi desirarar ble.

m Descrcrc irir pipi titit on: TwTwT o component,t,tsolidsdsd ,s,s low odor,r,r novolac epoxyxyxg or epoxyoxyox polymer concrerer te.

CrownShield® SL

Recommendeded d UsUsU e: For frfrf eezereezer rs,rs,rcold storagoragor e or outdoor environronr ments.ts.t

SySyS steystey m Descrcrc irir pipi titit on: TwTwT o component,t,t100% solidsdsd ,s,s epoxyxyx polymer concrerer te.

Protectstst concrerer te and, dry or liquid

environments and withstands thermal changes.Use where industrial protection is needed onfloors, drains and containment areas.

CrownPro EPCTempShield is an epoxy polymer concrete,100% solids, non-shrink, low odor duringapplication that becomes a monolithicpart of the clean concrete. It may betroweled on flat, graded or vertical surfaces.

idShield

CrownPro™

AcidShield

CrownPro™ SparkShield &CrownLiquidCopper™PrimerProduct 353 & 352Reliable self-leveling ESD Protection

Recommended Use: For floor environmentswhere there is danger of static electricity

System Description: CrownLiquidCopper is applied as a self-leveling epoxy polymer concreteoverlay and top coated with CrownPro SparkShield.The combination of the two products creates a highquality ESD system that complies with NFPA StaticDissipating Standards. The 2mm thick overlay alsoprovides a tough wear surface that typically is applied at 3,000 ft2/hr.

CrownPro™ SparkShield™& CrownLiquidCopper

CrownCove™

Fast Around Corners & Straightaways

Recommended Use: A polymer precastfloor- to-wall cove system is used for com-mercial, retail, institutional, and industrialapplications with selected floor polymer orcementitious overlays. Its seamless designstops water, chemicals, insects, bacteria,debris, dirt and floor cleaning solutions frompuddling or seeping into the floor-to-walljuncture. It's decorative and industrial tough.Placement is cost effective and faster thanhand trowel methods – and always looks thesame from start to finish.

System Description: A Crown exclusive.The cove system is a precast polymer basemolding available in both 4 and 6-inch (100and 150 mm) heights, with pre-formed piecesthat create inside and outside corners.When CrownCove is coated or overlaidwith polymers, the finished cove providesa uniform, seamless, integral floor-to-walljuncture; producing the most sanitary andeasily maintained floors available.

CrownSilver™

Safety and Hygiene

Product Description: Antimicrobial Crown-Silver provides sanitary protection usingsilver-ion technology to control the growthof bacteria and fungi on floor and wall surfaces.It is recommended that CrownSilver be addedto all overlays and top coats when theseconditions exist.

CrownCote™ Vapor BarrierProduct 303Stop Vapor Transmission

Recommended Use: To stop vapor transmis-sion through concrete floors when overlayedwith hardwood floors, tile, carpet and CrownPolymers overlays.

Product Description: Ultra low viscositymodified 100% solids, non-solvent epoxy.Penetrates into the concrete, seals off, andprevents vapor transmission to the surface.Warranty available.

CrownFlex™MembraneProduct 304 Adds Extra Moisture and Vibration Protection

Load Bearing Control Joint SealersCrownFlex™Joint Sealer Gel GradeProduct 501 Non-sag consistency

CrownFlex™Joint SealerProduct 505 Pourable or Pumpable

CrownFlex™EVACrack, Expansion Joint & Water-Stop

Recommended Use: Waterproof seal forexpansion and isolation joints, includingmoving cracks in concrete. Stops watertransfer and allows natural thermal move-ments or vibrations above and below thewater line.

System Description: A composite ofCrownFlex EVA, closed cell pre-formed foam,and CrownFlex Joint Sealer, a flexible epoxy.Each joint is designed to provide approxi-mately a 100% safety factor in movementand waterproofing.

CrownCant™

CrownCorner™ Protectors

Escherichia coli Test Results.A.Control Sample E-Coli 24 hours no treatment.B. CrownSilver™ E-Coli 24 hours 99.999% control.Note: Staphylococcus aureus: Same results.

A. B.

Vapor and MoistureProtection

Improve Floor Longevity WithCrown Polymers Support Products

CrownCove™CrownCove™CrownCove

Fast Around Corners & Straightaways

Recommended UsUsU e: A polymer precrecr aecaec stfloor-floor-floor to-wall cove system isisi used for com-merciarciar l retaretaret il institutional and industrialtrialtr

CrownCant™

CrownCorner™CrownCorner™CrownCorner Protectors

CrownCove™

CrownShield SL 315™

Limited Warranty

Crown Polymers, Corp. warrants its products to be free of manufacturing defects, to be of good quality,and that they will meet Crown Polymers current published physical properties when applied inaccordance with Crown Polymers written directions and tested in accordance with ACI, ASTM andCrown Polymers Standards. Product proved to be defective will be replaced. There are no other warranties byCrown Polymers, Corp. of any nature whatsoever, expressed or implied, including any warranty ofmerchantability or fitness for a particular purpose in connection with this product. Crown Polymers, Corp. shall not be liable for damages of any sort, including remote or consequential damages, resulting from anyclaimed breach of any warranty, whether expressed or implied, from any other cause whatsoever.Crown Polymers will not be responsible for use of this product in a manner to infringe on any patent held by others.

All registered trademarks are of Crown Polymers, Corp. unless otherwise noted. © Crown Polymers, Corp., 2015 Printed in the USA

Call for the location ofyour nearest Crown Polymersrepresentative.888.732.1270 Toll Free

Crack Repair, Patching, Regrading & Leveling Product Systems Comply with ASTM C881.

For more information on Crown Polymers products and systems please contact us by telephone or email.

Crown Polymers, Corp.8550 W. Desert Inn Rd., Ste. 102-125Las Vegas, NV 89117