Upload
others
View
20
Download
0
Embed Size (px)
Citation preview
Industrial
Page 127Page 127
Page 128
Industrial | Canvas
Loomstate
Pack Duck
100% cotton canvas straight off the loom hence the name “loomstate”. A natural cotton colour and comes in four weights. 8oz, 10oz, 12oz and 14oz. Ideal for promo bags, bank bags, artist sheets, dust covers, filter bags etc. Roll Width is 183cm/72” and roll length usually between 40-60 metres
Packduck Canvas is a proofed cotton canvas. Because Packduck Canvas is 100% cotton, shrinkage will occur when water is applied to the canvas.
For higher quality jobs it is recommended to use a Poly/Cotton blended canvas like our Supaproof range.
Packduck Canvas is ideal for jobs such as swag bags, tool bags, econo-horse covers, loose fit tarpaulins etc.
TECHNICAL SPECIFICATIONS
WEIGHT 8oz 10oz 12oz 14oz
WIDTH 183cm 183cm 183cm 183cm
BASE CLOTH 100% Cotton 100% Cotton 100% Cotton 100% Cotton 2/24 x 1/8 2/10 x 1/10 2/10 x 2/10 2/10 x 3/10
WEAVE 68 x 38 Threads 44 x 32 Threads 44 x 32 Threads 48 x 28 Threads
FABRICATION METHODS Sewing
FABRIC CARE OFPANZ Care Label OF-3
TECHNICAL SPECIFICATIONS
WIDTH 183cm
WEIGHT 15oz Raw Loomstate (Approx 18oz finished Proofed weight)
BASE CLOTH 100% Cotton (finished with waterproof coating)
WEAVE 2/10 x 3/10 48 x 28 Threads
SHRINKAGE Shrinkage will occur when water is applied
FABRICATION METHODS Sewing
FABRIC CARE OFPANZ Care Label OF-3
GREEN BLACKOLIVE NAVY
Jute100% natural woven fibre derived from Asia. Ideal for sack bags, horse covers, cow covers, bitumen covers etc. 36”/91cm wide and weight is 20oz/650gsm. Roll lengths are approx 100 metres.
Page 129
Industrial | Canvas
6oz supaproof® Poly/Cotton CanvasTECHNICAL SPECIFICATIONS
WIDTH 205cm
WEIGHT Loomstate 220gsm (6.5oz) Proofed 318gsm (9.4oz) +/- 30gsm
BASE CLOTH 65% Polyester / 35% Cotton
SHRINKAGE 2% - Warp
BREAKING FORCE Warp/Weft 1290N / 1000N (AS 2001.2.3)
TEAR STRENGTH Warp/Weft 40N / 32N (AS 2001.2.10)
HYDROSTATIC HEAD 1244.5mm (AS2001.2.17)
CONE TEST 0ml (24 Hours)
U/V STABILITY 5 Years
FABRICATION METHODS Sewing
FABRIC CARE OFPANZ Care Label OF-3
GREY BEIGEMAROON DARK GREENLIGHT GREYDARK NAVY
NAVY
LIGHT SAND
Supaproof® 6 is a light-weight (6.5oz basefabric, 9.4oz finished) premium finely woven 65/35 polyester/cotton specially engineered and impregnated utilizing the DDP Defab Duraproof Process.
Quality and weight balance is guaranteed with Supaproof® 6. Supaproof® 6 is tailored for very specific applications namely light-weight tent roofs & walls, awnings, flyovers and camper trailer walls and roofs.
• UV resistant• Water proof• Mildew resistant• Dimensionally stable
(shrinkage resistance)• Wide colour range selected
for the Australian and New Zealand market
• Defab Duraproof Process
Page 130
Industrial | Canvas
8oz supaproof® Poly/Cotton CanvasTECHNICAL SPECIFICATIONS
WIDTH 205cm
WEIGHT Loomstate 293gsm(8oz) Proofed 394gsm (11oz) +/- 30gsm
BASE CLOTH 65% Polyester / 35% Cotton
MAXIMUM SHRINKAGE 2% - warp
BREAKING FORCE Warp/Weft 2303N / 1547N (AS 2001.1.2)
TEAR STRENGTH Warp/Weft 72N / 46N (AS 2001.2.10)
HYDROSTATIC HEAD 1244.5mm (AS 2001.2.17)
CONE TEST 0ml (24 hours)
U/V STABILITY 5 Years
FABRICATION METHODS Sewing
FABRIC CARE OFPANZ Care Label OF-3
BLACK
DARK NAVY
ANTELOPE
MAROON
OLIVE
LIGHT GREY
BRUNSWICK GREEN
LIGHT SAND
DARK GREEN
KHAKI
NAVY
GREY BEIGE
Supaproof® 8 is a light -medium weight (8oz basefabric, 11oz finished) premium 65/35 polyester/cotton general purpose proofed canvas woven in Australia and impregnated utilizing the DDP Defab Duraproof Process.
Supaproof® 8 is highly breathable and is guaranteed to provide superior performance in the most arduous environmental conditions. The fabric demonstrates no crease whitening in fabrication assisting with end use applications and performance properties.
Supaproof® 8 is ideally suitable for annexe roofs and walls, camper trailer roofs, walls and caravan awnings, retractable covers, bags, satchels and loose covers.
• UV resistant• Water proof• Mildew resistant• Dimensionally stable (shrinkage resistance)• Wide colour range selected for the Australian
and New Zealand market• Defab Duraproof Process
Page 131
Industrial | Canvas
12oz supaproof® Poly/Cotton CanvasTECHNICAL SPECIFICATIONS
WIDTH 205cm
WEIGHT Loomstate 380gsm(12oz) Proofed 530gsm (15oz) +/- 30gsm
BASE CLOTH 52% Polyester / 48% Cotton
MAXIMUM SHRINKAGE 2.5% - warp
BREAKING FORCE Warp/Weft 2595N / 1874N (AS 2001.2.3)
TEAR STRENGTH Warp/Weft 119N / 69N (AS 2001.2.10)
HYDROSTATIC HEAD 1111.50mm (AS 2001.2.17)
CONE TEST 0ml (24 hours)
U/V STABILITY 5 Years
FABRICATION METHODS Sewing
FABRIC CARE OFPANZ Care Label OF-3
Supaproof® 12 is a medium weight (12oz basefabric, 15oz finished) two-fold warp and weft polyester/cotton waterproof general purpose proofed canvas woven in Australia and impregnated utilizing the DDP Defab Duraproof Process.
Supaproof® 12 is ideally suitable for general applications including supported covers, awnings, annexe roofing and walls, trailer covers, campervan roofs and walls, stall covers, swags, hats, bags and tent walls and roofs, agriculture covers and ground sheets.
• UV resistant• Water proof• Mildew resistant• Dimensionally stable (shrinkage resistance)• Wide colour range selected for the Australian
and New Zealand market• Defab Duraproof Process
BLACK
DARK NAVY
ANTELOPE
MAROON
OLIVE
LIGHT GREY
BRUNSWICK GREEN
LIGHT SAND
DARK GREEN
KHAKI BEIGEGREY
NAVY
Page 132
Industrial | Canvas
Camperfield® Annexe Awning CanvasTECHNICAL SPECIFICATIONS
WIDTH 220cm
COMPOSITION 100% Polyester
MASS 350gsm
MAXIMUM SHRINKAGE 3% - warp
TENSILE STRENGTH Warp/Weft 2300N / 1700N (AS 2001.1.2)
TEAR STRENGTH Warp/Weft 90N / 60N (AS 2001.2.10)
HYDROSTATIC HEAD 2039mm (20kPa)
LIGHT FASTNESS 7-8
FABRICATION METHODS Sewing
FABRIC CARE OFPANZ Care Label OF-3
When outdoor protection needs to be capable of handling the roughest and toughest a sunburnt country has to offer, Camperfield® offers external protection fabrics for caravan annex walls and fixed awnings that are the strongest, most durable available in the market.
22704
22501
22511
22526
22553
22709
22503
22512
22547
22555
22728
22509
22516
22549
22731
22510
22522
22551
• Woven from 100% high strength polyester yarns• Woven and finished in Australia for Australian and New Zealand conditions• 100% blockout from the suns harmful UV rays• UV resistant• Highly rot, mould, mildew and water resistant• Available in a range of balanced back coating in both light sand and grey backing
Page 133
Industrial | Canvas
tearlok® Bison II
tearlok® Bison II is an incredibly high strength heavy weight 100% core spun canvas fabric, with a two way rip stop woven construction with a square design grid.
tearlok® Bison II is manufactured using the superior DDP (Defab Duraproofing Process) coupled with the latest advancements in weaving technology. When outdoor protection needs to adjust to constantly altering weather, road or terrain conditions, Bison II guarantees a canvas that will ensure protection from the toughest and the most arduous conditions (18oz proofed).
tearlok® Bison II is ideal for applications such as heavy duty long haul road transport tarpaulins, utility and 4WD covers, heavy duty horse rugs & blankets, industrial covers & curtains, shipping /rail transport covers.
TECHNICAL SPECIFICATIONS
WIDTH 205cm
WEIGHT 615gsm
BASE CLOTH 52% Polyester / 48% Cotton (100% Corespun-Ripstop)
SHRINKAGE Warp/Weft 1.6% / 0.3%
TENSILE STRENGTH Warp/Weft 2165N / 2620N (AS 2001.2.3)
TEAR STRENGTH Warp/Weft 239N / 186N (AS 2001.2.10)
HYDROSTATIC HEAD >122mbar / 12.2kpa / 1220mm (AS2001.2.17)
CONE TEST 0ml (24 Hours) (AS 20014.2.18)
U/V STABILITY 5 Years
RUB FASTNESS Dry 4/5—Wet 4/5 (AS 2001.4.3)
FABRICATION METHODS Sewing
FABRIC CARE OFPANZ Care Label OF-3
ROYAL ANTELOPE SLATE BLACK
Key Benefits:• Guaranteed 5 years• Environmentally friendly• Easy to care and maintain
Key Features:
• Australian Made
• High Tear resistance /Highly abrasive resistant two way Rip Stop Construction
• Highly waterproof /Superior hydrostatic water resistance
• Completely breathable /Guaranteed not to sweat
• Exclusive DDP (Defab Duraproofing Process)
• Dimensionally Stable /Shrinkage resistance
• Mould, Rot and Mildew Resistant
• Crease Whitening Resistant /Optimum fabric colour fastness
• Maximum UV Stability /Effective light and heat control
Page 134
Industrial | Canvas
ROYAL ANTELOPE SLATE BLACK
tearlok® boulder
tearlok® Boulder is a medium weight 52/48 polyester cotton proofed canvas fabric with a tearlok square (ripstop) construction made of high tensile corespun yarn, to give it additional tear and tensile strength.
tearlok® Boulder is engineered using the DDP (Defab Duraproofing Process) coupled with the latest advancements in weaving technology. (12oz loomstate / 15oz proofed)
tearlok® Boulder is tailored for a myriad of medium to heavy weight applications including, fixed frame canopies, trailer, utility and 4WD covers, machinery covers, industrial curtains/partitions, temporary fabric structures, hire tarpaulins, heavy duty seat covers, horse and livestock covers and rugs and general canvas goods.
TECHNICAL SPECIFICATIONS
WIDTH 205cm
WEIGHT 550gsm
BASE CLOTH 52% Polyester / 48% Cotton (Corespun-Ripstop Thread Only)
SHRINKAGE Warp/Weft 0.33% / 0.33%
TENSILE STRENGTH Warp/Weft 1955N / 1420N (AS 2001.2.3)
TEAR STRENGTH Warp/Weft 181N / 168N (AS 2001.2.10)
HYDROSTATIC HEAD >300mbar / 30kpa / 3000mm (AS2001.2.17)
CONE TEST 0ml (24 Hours) (AS 20014.2.18)
U/V STABILITY 5 Years
RUB FASTNESS Dry 4/5—Wet 4/5 (AS 2001.4.3)
FABRICATION METHODS Sewing
FABRIC CARE OFPANZ Care Label OF-3
Key Benefits:• Guaranteed 5 years
• Environmentally friendly
• Easy to care and maintain
Key Features:• Australian Made
• Highly waterproof (Superior hydrostatic water resistance)
• Completely breathable /Guaranteed not to sweat
• Exclusive DDP (Defab Duraproofing Process)
• Dimensionally Stable /Shrinkage resistance
• Mould, Rot and Mildew Resistant
• Crease Whitening Resistant /Optimum fabric colour fastness
• Maximum UV Stability /Effective light and heat control
Page 135
Industrial | Canvas
SLATE GREY BLACK
MX Canvas
MX CANVAS is a blended Polycotton Canvas purposely designed for use as an automotive aftemarket seat cover material.
Used extensively by Farmers and Tradies to protect the original seat covers from wear and tear.
Available in:
8oz and 12oz weights.
TECHNICAL SPECIFICATIONS
WIDTH 203cm
WEIGHT 380gsm
BASE CLOTH 65% Polyester / 35% Cotton 2/20 x 2/20
MAXIMUM SHRINKAGE 2% Warp 0.4% Weft
TENSILE STRENGTH Warp/Weft 1981N / 1177N (AS2001.2.3)
TEAR STRENGTH Warp/Weft 59N / 42N (AS2001.2.10)
HYDROSTATIC HEAD 740mm (AS 2001.2.17)
CONE TEST 0ml / 24 hours (AS2001.2.18)
SPRAY RATING 80% (AS2001.2.16)
LIGHT FASTNESS 7/8 (AS2001.4.21)
U/V STABILITY 2 Years
FABRICATION METHODS Sewing
FABRIC CARE OFPANZ Care Label OF-3
Page 136
Industrial | PE
WHITE
WHITE
NATURAL
BLUE/SILVER
BLUE
BEIGE OLIVE
Genlene Budget
Genlene Premium
GENLENE BUDGET is an economically priced polyethylene coated fabric.
GENLENE BUDGET is a suitable fabric for Ground sheets, Construction drop sheets, packaging, pattern making and various economical covers.
Because it is economically priced it is ideal for those one off throw away covers or protective sheets
GENLENE PREMIUM is an economically priced polyethylene coated fabric.
GENLENE PREMIUM is a suitable fabric for Ground sheets, Tent floors, Construction drop sheets, packaging and various economical covers.
TECHNICAL SPECIFICATIONS
WIDTH 183cm
WEIGHT 150gsm
BASE CLOTH 1000 Denier
WEAVE 12 x12
U/V STABILITY 1 Year minimum
FABRICATION METHODS Hot Wedge, Hot Air Welding & Sewing
FABRIC CARE OFPANZ care label OF-1
TECHNICAL SPECIFICATIONS
WIDTH 183cm
WEIGHT 150gsm
BASE CLOTH 1000 Denier
WEAVE 12 x12
U/V STABILITY 1 Year minimum
FABRICATION METHODS Hot Wedge, Hot Air Welding & Sewing
FABRIC CARE OFPANZ care label OF-1
Page 137
Industrial | PE
WHITE WHITE/SILVER GREEN BLUE
LiteCover
LITECOVER is a high grade PE Polyethylene coated fabric, Litecover has good yarn uniformity with minimal distortion.
LITECOVER is recommended for “STATIONARY” covers such as Fixed Frame Covers, Boat storage covers, Stack covers, Ground sheets, Building tarps etc.
TECHNICAL SPECIFICATIONS
WIDTH 205cm All Colours / 366cm Silver White only
WEIGHT 250gsm
BASE CLOTH 1300 Denier
WEAVE 14 x 14
COATING 50 Micron face and back
TEAR STRENGTH Warp/Weft 270 / 260 N JIS1096C
TENSILE STRENGTH Warp/Weft 1500 / 1450 N JIS1096A
U/V STABILITY 3 Year minimum
FLEXING 200,000 cycles minimum
FABRICATION METHODS Hot Wedge, Hot Air welding & Sewing
FABRIC CARE OFPANZ care label OF-1
Page 138
Industrial | PE
WHITEGREEN BLUEOLIVE
Maxlite
MAXLITE is a wide width premium polyethylene coated fabric woven on sultzer looms. This allows for maximum yarn uniformity and no moisture for best adhesion and U/V efficiency.
MAXLITE has recently been improved using Metallocene Polyethylene (mPE) resins which allow for easier welding and greater resistance to Water Capilary.
MAXLITE is an ideal fabric for large cost effective static covers, e.g. Haycovers, Boat Storage Covers, Fumigation covers and other stationary Tarpaulins.
TECHNICAL SPECIFICATIONS
WIDTH 366cm
WEIGHT 285gsm
BASE CLOTH 1500 Denier
WEAVE 14 x 14
COATING 50 Micron face and back
TEAR STRENGTH Warp/Weft 300 / 300 N JIS1096C
TENSILE STRENGTH Warp/Weft 1650 / 1600 N JIS1096A
U/V STABILITY 3 Year minimum
FLEXING 200,000 cycles minimum
FABRICATION METHODS Hot Wedge, Hot Air welding & Sewing
FABRIC CARE OFPANZ care label OF-1
Page 139
Industrial | PE
Maxspan
Solarpro
MAXSPAN is a super strength wide width 366cm high grade PE coated fabric woven on the Sultzer loom.
This allows for ideal yarn uniformity with minimal, if any, distortion, and no moisture for best adhesion.
MAXSPAN is highly recommended for Fixed Framed Roof Structures and Stationary Covers.x
Solarpro is a high grade translucent polyethylene primarily for the horticulture market.
Solarpro will allow 85% light transmission to filter through therefore giving it a real greenhouse effect.
TECHNICAL SPECIFICATIONS
WIDTH 366cm
WEIGHT 320gsm
BASE CLOTH 3000 Denier
WEAVE 16 x 16 (Double layer 8 x 8)
COATING 65 Micron face and back
TEAR STRENGTH Warp/Weft 420 / 410 N JIS1096C
TENSILE STRENGTH Warp/Weft 2000 / 1900 N JIS1096A
U/V STABILITY 5 Year minimum
FABRICATION METHODS Hot Wedge, Hot Air welding & Sewing
FABRIC CARE OFPANZ care label OF-1
TECHNICAL SPECIFICATIONS
WIDTH 183cm & 270cm
WEIGHT 180gsm
BASE CLOTH 1100 Denier
WEAVE 10 x 10
U/V STABILITY 5 Year Limited
FABRICATION METHODS Hot Wedge, Hot Air Welding & Sewing
FABRIC CARE OFPANZ care label OF-1
WHITE/SILVER GREEN
Page 140
Industrial | PE
Alumi/Black
PE 366
ALUMI/BLACK PE is a high grade Polyethylene coated fabric.
ALUMI/BLACK PE is a two toned fabric, Black on the underside with an Aluminium Foil coating on the topside.
The Aluminium Foil offers an excellent heat refelective surface making it ideal for produce bin covers, surfboard covers or any other cover that requires the heat to be reflected away.
Because the aluminium coating is not hot air weldable there is a 30mm strip on one egde of the material with no aluminium coating to allow the joining of another sheet.
PE 366 is a medium grade polyethylene coated fabric with good yarn uniformity.
PE 366 is recommended for static covers such as Boat Storage covers, Stack Covers,Ground Sheets, Fumigation covers etc.
TECHNICAL SPECIFICATIONS
WIDTH 180cm + 30mm weldable edge
WEIGHT 190gsm
BASE CLOTH 1000 Decitex HDPE
WEAVE 10 x 10
COATING 40 Micron face and back LDPE
TEAR STRENGTH Warp/Weft 95 / 70 N JIS1096C
TENSILE STRENGTH Warp/Weft 550 / 550 N JIS1096A
U/V STABILITY 2 Year minimum
FABRICATION METHODS Hot Wedge, Hot Air welding on edge seam & Sewing
FABRIC CARE OFPANZ care label OF-1
TECHNICAL SPECIFICATIONS
WIDTH 366cm
WEIGHT 280gsm
BASE CLOTH 1200 Denier
WEAVE 16 x 16
U/V STABILITY 2 Year minimum
FABRICATION METHODS Hot Wedge, Hot Air welding & Sewing
FABRIC CARE OFPANZ care label OF-1
WHITEBLUE
Page 141
Industrial | Polyester
Industrial | PE
PE Repair Tape
CAMOUFLAGE PU
PE Repair Tape is uniquely designed for repairing Polyethylene material.
PE Repair Tape is a translucent tape allowing the colour of the PE you cover to show through giving an almost invisible repair.
Simply cut to length and stick over a tear to repair.
Available in:
50mm Wide x 20m length
100mm Wide x 20m length
TECHNICAL SPECIFICATIONS
WIDTH 150cm
WEIGHT 320gsm
BASE CLOTH 100% Polyester 600d x 600d
COATING PVC Coating on underside
WATERPROOFNESS 100%
U/V STABILITY 1 Year
FABRICATION METHODS Sewing
FABRIC CARE OFPANZ Care Label OF-4
TECHNICAL SPECIFICATIONS
WIDTH 150cm
WEIGHT 430gsm
BASE CLOTH 100% Polyester 900d x 900d
COATING PU Coating on underside
WATERPROOFNESS 800mm (AATCC 127)
U/V STABILITY 1 Year
FABRICATION METHODS Sewing
FABRIC CARE OFPANZ Care Label OF-4
NAVYBLACK
CAMOUFLAGE PU is a 900d Polyester with a “Jungle Green” Camouflage print.
CAMOUFLAGE PU has a 800mm PU coating for high water resistance making it an ideal choice for Gun Bags and Gear Bags.
Cortex is a durable woven Polyester fabric with a PVC backing for luggage and bag manufacturing.
NOTE: Cortex should not be used for outdoor covers.
Page 142
Industrial | Polyester
Commander
Commander is a Solution dyed U/V stabilised Polyester fabric with a 1000mm PU backing for high water repellancy.
Commander is a durable light weight choice for boat covers, storage covers, furniture covers etc.
TECHNICAL SPECIFICATIONS
WIDTH 200cm
WEIGHT 240gsm
BASE CLOTH 100% Solution Dyed Polyester
COATING PU Coating on underside
WATERPROOFNESS 1000mm minimum (AATCC 127)
TEAR STRENGTH Warp/Weft 76 / 67N
ABRASION RESISTANCE 20,000 cycles (Martindale ISO 12847-2)
U/V STABILITY 3 Year Limited
COLOUR FASTNESS 4/5 (AATCC 16E)
FABRICATION METHODS Sewing
FABRIC CARE OFPANZ Care Label OF-4
LIGHT GREY NAVY BLACKMARINEBEIGE CHARCOAL
Page 143
Industrial | PVC
Clear Pvc No F/R 0.3Mm
Clearview
Our Clear PVC 0.3mm is a lightweight clear suitable for small jobs like clear site file pockets to protect documents or for wall pocket storage etc.
Note: Clear PVC 0.3mm is not F/R (refer to Genclear for F/R quality)
CLEARVIEW is a Calandered Clear PVC.
CLEARVIEW is ideal for vertical screening. (Note: Clearview has no F/R additive, refer to Genclear for F/R quality)
Available 150cm wide in the following thicknesses: 0.70mm
TECHNICAL SPECIFICATIONS
WIDTH 127cm
THICKNESSES 0.3mm
U/V STABILITY 2 Years minimum / QUV 500hours
SHRINK RATE 4% Warp / 2% Weft (approximate only)
FIRE RETARDANT N/A
FLEXING 200,000 cycles minimum AS-1441.6
COLD CRACK -9°C
FABRICATION METHODS Hot Wedge, Hot Air or High Frequency Welding: Sewing: Adhesive
FABRIC CARE OFPANZ Care Label OF-6
TECHNICAL SPECIFICATIONS
WIDTH 150cm
THICKNESSES 0.7mm
U/V STABILITY 2 Years minimum
SHRINK RATE 4%
FLEXING 200,000 cycles minimum
COLD CRACK -9°C
FABRICATION METHODS Hot Wedge, Hot Air or High Frequency Welding: Sewing: Adhesive
FABRIC CARE OFPANZ Care Label OF-6
Page 144
Industrial | PVC
Genclear F/R
Tigertint F/R
GENCLEAR is a Calandered Clear PVC with added Fire Retardancy for your safety.
Available 150cm wide in the following thicknesses: 0.5mm, 0.70mm, 1.0mm
Tigertint is a Smoke Grey tinted Clear PVC ideal for reducing glare and creating privacy.
TECHNICAL SPECIFICATIONS
WIDTH 150cm
THICKNESSES 0.5mm / 0.7mm / 1.0mm
U/V STABILITY 2 Years minimum
SHRINK RATE 4% Warp / 2% Weft (Approximate Only)
FIRE RETARDANT AS/NZS1530.2 / ASTM-D568
FLEXING 200,000 cycles minimum AS-1441.6
COLD CRACK -9°C
FABRICATION METHODS Hot Wedge, Hot Air or High Frequency Welding: Sewing: Adhesive
FABRIC CARE OFPANZ Care Label OF-6
TECHNICAL SPECIFICATIONS
WIDTH 150cm
THICKNESSES 0.7mm
U/V STABILITY 2 Years minimum
SHRINK RATE 4%
FIRE RETARDANT AS1530.2 / ASTM-D568
FLEXING 200,000 cycles minimum
COLD CRACK -9°C
FABRICATION METHODS Hot Wedge, Hot Air or High Frequency Welding: Sewing: Adhesive
FABRIC CARE OFPANZ Care Label OF-6
Page 145
Industrial | PVC
Achilles Japan 3S
ACHILLES JAPAN 3S is a calandered Clear PVC with a double polished finish.
ACHILLES JAPAN 3S is an ideal clear PVC for vertical screening.
Available 137cm wide in the following thicknesses:
0.50mm x 30m roll
0.75mm x 25m roll
TECHNICAL SPECIFICATIONS
WIDTH 137cm
U/V STABILITY 2 Years minimum
SHRINK RATE 2% - 4% approx.
THICKNESSES 0.5mm 0.75mm
TEAR STRENGTH 36.8N Warp / 36.7N Weft 61.6N Warp / 61.4N Weft
TENSILE STRENGTH 142N Warp / 126N Weft 183.6N Warp / 167.7N Weft
COLD CRACK -25°C
FABRICATION METHODS Hot Wedge, Hot Air or High Frequency Welding: Sewing: Adhesive
FABRIC CARE OFPANZ Care Label OF-6
Page 146
Industrial | PVC
AK 520
AK 520 PVC is an economically priced medium weight PVC coated Polyester material.
AK 520 should not be used for permanent exposure outdoors, the principal end use for AK 520 PVC is for Gym Mats, Tackle Pads, Mattress Covers, internal machinery covers etc.
TECHNICAL SPECIFICATIONS
WIDTH 205cm
WEIGHT 520gsm
BASE CLOTH Polyester 550 Decitex
WEAVE 8 x 8 per cm
COATING PVC paste coated
SURFACE FINISH Satin Face
TEAR STRENGTH Warp/Weft 250 / 200 N
TENSILE STRENGTH Warp/Weft 1100 / 840 N/ 5cm
U/V STABILITY 2 year minimum
FIRE RETARDANT N/A
ADHESION 75 N per 2.5cm
FLEXING 250,000 cycles minimum
TEMPERATURE RANGE -30 / +70 degC
FABRICATION METHODS Hot Wedge, Hot Air or High Frequency Welding: Sewing: Adhesive
FABRIC CARE OFPANZ Care Label OF-1
ROYAL BLUE
Page 147
Industrial | PVC
Allcover
Allcover is a quality mid-range PVC and is ideal for gym mats, punch bags, tackle bags and so much more.
TECHNICAL SPECIFICATIONS
WIDTH 205cm
WEIGHT 620gsm
BASE CLOTH Polyester 1100 Decitex
WEAVE 8 x 8 per cm
COATING PVC paste coated
SURFACE FINISH High Gloss Lacquer
TEAR STRENGTH Warp/Weft 580 / 420 N
TENSILE STRENGTH Warp/Weft 2400 / 2000 N/ 5cm
U/V STABILITY 2 year minimum
ADHESION 75 N per 5cm
FLEXING 300,000 cycles minimum
TEMPERATURE RANGE -30 / +70 degC
FABRICATION METHODS Hot Wedge, Hot Air or High Frequency Welding: Sewing: Adhesive
FABRIC CARE OFPANZ Care Label OF-1
ROYAL BLUE BLACK MATT BLACK FLUORO YELLOW
Page 148
Industrial | PVC
Genlon 400
GENLON 400 is a woven polyester fabric with a flexible PVC coating on both sides.
GENLON 400 is an ideal fabric for banners, lightweight covers, aprons, sport and promotional products etc.
TECHNICAL SPECIFICATIONS
WIDTH 183cm
WEIGHT 480gsm
BASE CLOTH Polyester 233 Decitex
WEAVE 9 x 9 per cm
COATING PVC laminate coated
SURFACE FINISH Gloss finish
TEAR STRENGTH Warp/Weft 170 / 145 N
TENSILE STRENGTH Warp/Weft 780 / 590 N/ 5cm
U/V STABILITY 2.5 year minimum
FIRE RETARDANT N/A
ADHESION 40 N per 5cm
FLEXING 400,000 cycles minimum
TEMPERATURE RANGE -30 / +70 degC
FABRICATION METHODS Hot Wedge, Hot Air or High Frequency Welding: Sewing: Adhesive
FABRIC CARE OFPANZ Care Label OF-1
WHITE
HIVIS ORANGE
GREY YELLOWBLUE BLACK RED DARK GREEN
Page 149
Industrial | PVC
Genlon 600
GENLON 600 is a high quality PVC coated polyester fabric with a superior flexible PVC coating on both sides.
GENLON 600 is a very versatile PVC commonly used for boat covers, fixed frame awnings, banners and other medium weight cover requirements.
TECHNICAL SPECIFICATIONS
WIDTH 205cm
WEIGHT 600gsm
BASE CLOTH Polyester 550 Decitex
WEAVE 8 x 8 per cm
COATING PVC paste coated
SURFACE FINISH High Gloss ROWACRYL protective finish
TEAR STRENGTH Warp/Weft 250 / 200 N
TENSILE STRENGTH Warp/Weft 1100 / 840 N/ 5cm
U/V STABILITY 3 year minimum
FIRE RETARDANT N/A
ADHESION 90 N per 5cm
FLEXING 400,000 cycles minimum
TEMPERATURE RANGE -30 / +70 degC
FABRICATION METHODS Hot Wedge, Hot Air or High Frequency Welding: Sewing: Adhesive
FABRIC CARE OFPANZ Care Label OF-1
WHITE
GREY
ROYAL BLUE NAVY BLUE BLACK
DARK GREEN YELLOWDARK GREY BEIGE ORANGE RED
Page 150
Industrial | PVC
Covertex F/R
Covertex is a woven polyester fabric with a flexible PVC coating on both sides.
Covertex is a very versatile PVC making it an ideal choice for many applications such as tarpaulins and general covers, banners, gym mats, and with the added bonus of being FIRE RETARDANT.
TECHNICAL SPECIFICATIONS
WIDTH 250cm
WEIGHT 650gsm
BASE CLOTH Polyester 1100 Decitex
WEAVE 8 x 8 per cm
COATING PVC Blade/Knife coated
SURFACE FINISH Acrylic protective finish
TEAR STRENGTH Warp/Weft 280 / 250 N
TENSILE STRENGTH Warp/Weft 2500 / 2100 N/ 5cm
U/V STABILITY 3 year minimum
FIRE RETARDANT AS1530.2
ADHESION >100 N per 5cm
TEMPERATURE RANGE -30 / +70 deg C
FABRICATION METHODS Hot Wedge, Hot Air or High Frequency Welding: Sewing: Adhesive
FABRIC CARE OFPANZ Care Label OF-1
WHITE 9003 RED 3002 BLUE 5002YELLOW 1003
ALUMINIUM R7038SBLACK 9005
GREEN 6005 LIGHT GREY 7004 DARK GREY 6023
Page 151
Industrial | PVC
Polystar Premium
Polystar Premium is a woven polyester fabric with a flexible PVC coating on both sides.
Polystar Premium is a very versatile PVC making it the ideal choice for medium weight covers and tarpaulins and with a wide width of 250cm fabrication cost can also be kept to a minimum. (note: White also available at 300cm)
TECHNICAL SPECIFICATIONS
WIDTH 250cm all colours / 300cm White only
WEIGHT 720gsm
BASE CLOTH Polyester 1100 Denier / 1220 Decitex
WEAVE 8 x 8 per cm
COATING PVC paste coated
SURFACE FINISH High Gloss ROWACRYL protective finish
TEAR STRENGTH Warp/Weft 490/430 N
TENSILE STRENGTH Warp/Weft 3500 / 3100 N/ 5cm
U/V STABILITY 3 year minimum
FIRE RETARDANT AS/NZS 1530.2
ADHESION 110 N per 5cm
FLEXING 400,000 cycles minimum
TEMPERATURE RANGE -30 / +70 degC
FABRICATION METHODS Hot Wedge, Hot Air or High Frequency Welding: Sewing: Adhesive
FABRIC CARE OFPANZ Care Label OF-1
YELLOW
KELLY GREEN
RED
WHITE
LIGHT BLUE
LEMON YELLOW
ROYAL BLUE EMERALD GREEN
ORANGE CANDY RED
DARK GREEN LIGHT GREY
BEIGE
DARK GREY
BLACK
Page 152
Industrial | PVC
Express 900
EXPRESS 900 is a superwide PVC coated Panama weave polyester.
EXPRESS 900 is traditionally made for the truck side curtain market but also finds its way into heavy covers and screens.
TECHNICAL SPECIFICATIONS
WIDTH 330cm
WEIGHT 900gsm
BASE CLOTH Polyester 2 x 1100 Decitex
COATING PVC Paste Coated
SURFACE FINISH High Gloss ROWACRYL protective finish face and back
TEAR STRENGTH Warp/Weft 600 / 600 N
TENSILE STRENGTH Warp/Weft 4100 / 3600 N/ 5cm
U/V STABILITY 3 year minimum
ADHESION 90 N per 5cm
FLEXING 400,000 cycles minimum
TEMPERATURE RANGE -30º/+70ºC
FABRICATION METHODS Hot Wedge, Hot Air or High Frequency Welding: Sewing: Adhesive
FABRIC CARE OFPANZ Care Label OF-1
WHITE 900
Page 153
Industrial | PVC
Sauleda Panama
A high quality and durable Panama woven PVC coated textile. Whilst specifically designed for the fabrication of Truck Curtainsider panama has also been used when the need for a heavy and/or durable cover is required.
TECHNICAL SPECIFICATIONS
WIDTH 300cm
WEIGHT 900gsm
BASE CLOTH Polyester AT 1100 Decitex
SURFACE FINISH Lacquered Face and Back
TEAR STRENGTH Warp/Weft 800 / 500 N
TENSILE STRENGTH Warp/Weft 4000 / 3500 N/ 5cm
U/V STABILITY 3 year minimum
ADHESION 100 N per 5cm
TEMPERATURE RANGE -30º/+70ºC
FABRICATION METHODS Hot Wedge, Hot Air or High Frequency Welding: Sewing: Adhesive
FABRIC CARE OFPANZ Care Label OF-1
YELLOW 1003
WHITE 6396
RED 3020
MID BLUE 5005 COBALT 5002
GREEN 6026ORANGE 2004
LIGHT BLUE 5015 ROYAL 5010
RED 3002
NAVY 5013
DARK GREEN 6938
GREY 7038
BLACK 6949
Page 154
Industrial | PVC
Suntex Translucent
SUNTEX is a translucent PVC fabric for Structures, Shade Sails and Awnings that request higher light transmission and UV blocking.
SUNTEX’s surface contains a PVDF treatment which allows for less contamination on the surface and higher Durability, Weatherability and Ease of Cleaning.
• Excellent UV Blocking
• 45% Light Transmission
• Superior Durability and Weatherability
• Hot Air /Hot Wedge / HF Weldable
TECHNICAL SPECIFICATIONS
WIDTH 204cm
WEIGHT 800gsm
BASE CLOTH Polyester 833 Decitex 150TPM Anti Wicking
WEAVE 8 x 8 per cm
COATING PVC paste coated
SURFACE FINISH Top: PVDF Back: Acrylic Lacquer
TEAR STRENGTH Warp/Weft 380 / 445 N ASTM D751
TENSILE STRENGTH Warp/Weft 2090 / 2010 N/ 5cm ASTM D751
U/V STABILITY 10year Limited
ADHESION 107 N per 5cm ASTM D751
LIGHT TRANSMISSION 45%
U/V BLOCKING UV-R 98.4% KS K 0850:2014
UV-A 98.0% KS K 0850:2014
UV-B 99.9% KS K 0850:2014
FIRE RETARDANT AS1530.2 (FI Index =1) / CPAI-84
TEMPERATURE RANGE -20 / +70 deg C
FABRICATION METHODS Hot Wedge, Hot Air or High Frequency Welding: Sewing: Adhesive
FABRIC CARE OFPANZ Care Label OF-1
Page 155
Industrial | PVC
Tarpstop Ripstop™
Tarpstop RipstopTM is a woven polyester ripstop weave with a flexible PVC coating on both sides.
Tarpstop RipstopTM is ideal for heavy duty tarpaulins and transport covers
TECHNICAL SPECIFICATIONS
WIDTH 205cm
WEIGHT 670gsm
BASE CLOTH Polyester 1100 Decitex
WEAVE 9 x 9 per cm / Ripstop 1.5 x 1.5 per cm
COATING PVC paste coated
SURFACE FINISH High Gloss ROWACRYL protective finish
TEAR STRENGTH Warp/Weft 700 / 600 N
TENSILE STRENGTH Warp/Weft 2800 / 2300 N
U/V STABILITY 3 year minimum
FIRE RETARDANT N/A
ADHESION 90 N per 5cm
FLEXING 400,000 cycles minimum
TEMPERATURE RANGE -30 / +70 deg C
FABRICATION METHODS Hot Wedge, Hot Air or High Frequency Welding: Sewing: Adhesive
FABRIC CARE OFPANZ Care Label OF-1
LIGHT BLUE ROYAL BLUE EMERALD GREEN DARK GREEN
WHITE COBALT BLUE
GREY YELLOWRED
Page 156
Industrial | PVC
Durastop Ripstop
DURASTOP RIPSTOP is a woven polyester ripstop weave with a PVC coating on both sides.
DURASTOP RIPSTOP is ideal for heavy duty tarpaulins, transport covers, roll over bin covers, hire tarps and general PVC covers.
TECHNICAL SPECIFICATIONS
WIDTH 250cm
WEIGHT 670gsm
BASE CLOTH Polyester 1100 Decitex
WEAVE 9 x 9 per cm / Ripstop 1.7 x 1.7 per cm
COATING Spread/Blade Coated
SURFACE FINISH High Gloss Acrylic protective finish
TEAR STRENGTH Warp/Weft 400 / 300 N
TENSILE STRENGTH Warp/Weft 3000 / 2800 N/ 5cm
U/V STABILITY 3 year minimum
FIRE RETARDANT N/A
ADHESION 100 N per 5cm
FLEXING 400,000 cycles minimum
TEMPERATURE RANGE -30 / +70 deg C
FABRICATION METHODS Hot Wedge, Hot Air or High Frequency Welding: Sewing: Adhesive
FABRIC CARE OFPANZ Care Label OF-1
WHITE 9003 YELLOW 1003 RED 3002 GREEN 6005 BLUE 5002 DARK GREY 7016LIGHT GREY 7004
Page 157
Industrial | PVC
Trident Premium Ripstop™
Trident Premium RipstopTM is a premium woven polyester ripstop weave fabric with a superior flexible PVC coating on both sides.
Trident Premium RipstopTM is a superior Ripstop PVC making it the first choice for heavy duty covers where quality, strength and durability are prime requirements.
TECHNICAL SPECIFICATIONS
WIDTH 205cm
WEIGHT 690gsm
BASE CLOTH Polyester 1100 Decitex
WEAVE 9 x 9 per cm / Ripstop 1 x 1 per cm
COATING PVC paste coated
SURFACE FINISH High Gloss ROWACRYL protective finish
TEAR STRENGTH Warp/Weft 700 / 600 N
TENSILE STRENGTH Warp/Weft 2800 / 2300 N/ 5cm
U/V STABILITY 3 year minimum
FIRE RETARDANT N/A
ADHESION 90 N per 5cm
FLEXING 400,000 cycles minimum
TEMPERATURE RANGE -30 / +70 deg C
FABRICATION METHODS Hot Wedge, Hot Air or High Frequency Welding: Sewing: Adhesive
FABRIC CARE OFPANZ Care Label OF-1
LIGHT GREEN
NAVY BLUE
DARK GREEN
BLACKLIGHT BLUE
GREY
ROYAL BLUE
DARK GREY
WHITE
YELLOW ORANGE RED
Page 158
Industrial | PVC
Widestop Ripstop™
Widestop RipstopTM is an extension of our Trident Ripstop product PVC coated Polyester ripstop yarn. And with an impressive width of 330cm will help minimise the need for extra fabrication time.
Widestop ripstopTM is ideal for heavy duty Tarps and Covers and especially good for roll over bin covers where the extra width allows for no joins.
TECHNICAL SPECIFICATIONS
WIDTH 330cm
WEIGHT 690gsm
BASE CLOTH Polyester 1100 Decitex
WEAVE 9 x 9 per cm / Ripstop 1 x 1 per cm
COATING PVC paste coated
SURFACE FINISH High Gloss ROWACRYL protective finish
TEAR STRENGTH Warp/Weft 700 / 600 N
TENSILE STRENGTH Warp/Weft 2800 / 2300 N/ 5cm
U/V STABILITY 3 year minimum
FIRE RETARDANT N/A
ADHESION 90 N per 5cm
FLEXING 400,000 cycles minimum
TEMPERATURE RANGE -30 / +70 deg C
FABRICATION METHODS Hot Wedge, Hot Air or High Frequency Welding: Sewing: Adhesive
FABRIC CARE OFPANZ Care Label OF-1
ROYAL BLUE DARK GREENWHITE
Page 159
Industrial | PVC
Vertex
Vertex is a reinforced translucent PVC designed for vertical screening whilst continuing to maximise the amount of light transferring through.
Vertex is a wide 250cm with a ripstop weave pattern for additional tear resistance.
TECHNICAL SPECIFICATIONS
WIDTH 250cm
WEIGHT 560gsm
BASE CLOTH Polyester 1100 Decitex
WEAVE 3.5cm x 3.5cm Ripstop
COATING Clear PVC paste coated
TEAR STRENGTH Warp/Weft 250 / 230 N
TENSILE STRENGTH Warp/Weft 1350 / 1350 N/ 5cm
U/V STABILITY 3 year minimum
ADHESION 115 N per 5cm
FLEXING 400,000 cycles minimum
TEMPERATURE RANGE -20 / +70 degC
FABRICATION METHODS Hot Wedge, Hot Air or High Frequency Welding: Sewing: Adhesive
FABRIC CARE OFPANZ Care Label OF-1
Page 160
Industrial | Mesh
Breezeway
Breezeway Extra
BREEZEWAY is a PVC coated mesh ideal for replacing outdoor furniture mesh, bottom panels on Marine squabs, breather panels on gym mats and so much more.
Available in Black and White.
BREEZEWAY EXTRA is a 2500mm wide durable PVC coated Polyester Mesh ideal for Truck Debris covers, Sandpit covers, bottom panel on marine squabs and much more.
Available in Black only.
TECHNICAL SPECIFICATIONS
WIDTH 137cm
WEAVE 16 x 12
BASE CLOTH Polyester 1100 Decitex
COATING PVC
U/V STABILITY 3 year minimum
TEMPERATURE RANGE -30º/+70ºC
FABRICATION METHODS Hot Wedge, Hot Air or High Frequency Welding: Sewing
FABRIC CARE OFPANZ Care Label OF-1
TECHNICAL SPECIFICATIONS
WIDTH 250cm
WEAVE 16 x 12
BASE CLOTH Polyester 1100 Decitex
COATING PVC
U/V STABILITY 3 year minimum
TEMPERATURE RANGE -30º/+70ºC
FABRICATION METHODS Hot Wedge, Hot Air or High Frequency Welding: Sewing
FABRIC CARE OFPANZ Care Label OF-1
Page 161
Industrial | Mesh
Ferrari® 392 Mesh
Ferrari® 492-S2 Mesh
FERRARI 392 MESH is a multi-purpose heavy duty PVC coated polyester mesh ideal for architectural screens, separation screens, stock crate covers, enclosure pens etc.
Available in: Black
Ferrari’s exclusive Précontraint® technology holds the textile under tension in both warp and weft directions throughout the manufacturing process, ensuring higher levels of dimensional stability and tensile strength, less elongation and a flatter base cloth.
This enables a more substantial protective coating to be placed on top of the yarn without increasing overall thickness, creating a flatter, lighter textile subject to less deformation under tension. The finished textile delivers exceptional levels of strength and longevity.
Précontraint 492-S2 is suitable for a wide variety of applications ranging from catamaran trampolines to outdoor shade structures. Finished on both sides with a weldable acrylic lacquer for protection and ease of fabrication, the textile offers resistance to weathering, strength and reliability in an attractive, open mesh.
TECHNICAL SPECIFICATIONS
WIDTH 180cm
WEIGHT 820gsm
BASE CLOTH Polyester HT 1100 Decitex
SURFACE FINISH PVC Coating
TEAR STRENGTH Warp/Weft 600 / 600 N
TENSILE STRENGTH Warp/Weft 3000 / 3000 N/ 5cm
U/V STABILITY 3 year minimum
ADHESION 80 N per 5cm
POROSITY ± 27%
WIND EFFICIENCY 81%
FLAME RETARDANCY M2/NFP 92-507 • TEST 2/NFPA 701 • CSFM T19 • B1/DIN 4102-1 • G1/GOST 30244-94 • M2/UNE 23.727 •VKF 5.3/SN 198898 • Schwerbrennbar Q1-Tr1/ONORM B 3800-1
TEMPERATURE RANGE -30º/+70ºC
FABRICATION METHODS Hot Wedge, Hot Air or High Frequency Welding: Sewing: Adhesive
FABRIC CARE OFPANZ Care Label OF-1
TECHNICAL SPECIFICATIONS
WIDTH 180cm
WEIGHT 1050gsm
BASE CLOTH Polyester HT 3300 Decitex
SURFACE FINISH Formula S fluorinated varnish weldable
TEAR STRENGTH Warp/Weft 1800 / 1800 N
TENSILE STRENGTH Warp/Weft 5000 / 5000 N/ 5cm
U/V STABILITY 3 year minimum
ADHESION 120 N per 5cm
POROSITY ± 31%
WIND EFFICIENCY 78%
FLAME RETARDANCY M2/NFP 92-507 • B1/DIN 4102-1 • G1/GOST 20244-94
TEMPERATURE RANGE -30º/+70ºC
FABRICATION METHODS Hot Wedge, Hot Air or High Frequency Welding: Sewing: Adhesive
FABRIC CARE OFPANZ Care Label OF-1
Available in: White
Page 162
Industrial | Mesh
Trampoline Mesh
Trampoline Mesh Fabric is a 100% woven polypropylene mesh.
Available in:197cm wide Black & Blue394cm wide Black & Blue
TECHNICAL SPECIFICATIONS
WIDTH 197cm & 394cm
WEIGHT 270gsm
BASE CLOTH 100% Polypropylene
FINISH Tentered & Calendered
TENSILE STRENGTH Warp/Weft 2201N / 1934N (ASTM D-4632 GRAB METHOD)
TEAR STRENGTH Warp/Weft 836N / 822N (ASTM D-4533)
BURST STRENGTH 825 PSI (ASTM D 3786)
PUNCTURE RESISTANCE 190 lbs / 86kgf (ASTM D 4833)
ABRASION RESISTANCE 95% Strength Retained at 5000 Hrs (ASTM D 4886)
U/V STABILITY 75% Strength Retained at 5000 Hrs (ASTM D G154)
FABRICATION METHODS Sewing
BLACK BLUE
Tex Mesh
A wide open mesh allowing plenty of visibility.
Ideal for fixing as protective Bird netting in and around milking sheds whilst still allowing for plenty of natural light through.
Note: Tex Mesh MUST only be installed as a FIXED mesh installation.
This product is not suitable for high abrasion applications i.e Transport covers etc
Colour: Black
TECHNICAL SPECIFICATIONS
WIDTH 250cm
WEIGHT 210gsm
BASE CLOTH Polyester 2200 x 2200 dTex (2 x 1100 dTex)
WEAVE 6 x 6 per cm Knitted
COATING PVC coated
TEAR STRENGTH Warp/Weft 142 / 115 N
TENSILE STRENGTH Warp/Weft 1452 / 1507 N
U/V STABILITY 2 year minimum
TEMPERATURE -30 / +70
FABRICATION METHODS High Frequency Welding: Sewing
FABRIC CARE OFPANZ Care Label OF-1
Page 163
Industrial | Mesh
I-Mesh
Non Slip Matting Per Mesh
I-MESH is a revolutionary way to eyelet material.
I-MESH is a knitted Polyethylene with a breaking force of 195kg (Much stronger than a conventional eyelet).
I-MESH is folded in half over the fabric and sewn into place offering multiple tie off points along your fabric.
Ideally suited for Tarps, Debris Covers, Sandpit Covers and so much more.
Colour: Black
NON SLIP MATTING PER MESH is a Phthalate free Non-Slip expanded foam mesh ideal for use on boats, caravans and camping as a non slip surface.
Because NON SLIP MATTING PER MESH is free of heavy metals it is also ideal to use around areas such as Hospitals, preschools, dental surgery and any applications involving food.
Standards Reached:
“OEKO-TEX” European environmental protection certificate -class-1, BABY use grade.
“ROHS” regulation (directive 2002/95/EC)
“REACH” European commission (EC)
“FDA” USA standard requirements, test by SGS.
“Heavy metal free”, test by SGS/TUV
“Toxic free”, test by SGS/TUV
Biodegradation – ISO14855/ASTM D6400
Available in:
BLUE 150cm wide (50m rolls)
Page 164
Industrial | EVA
EF750 Eva Food Grade
EF750 is a EFM (Evironmentally Friendly Material) made from EVA.
• 30% lighter than PVC• Higher Flexibility and Anti-Cracking• Superior High Frequency weldability• FDA Certified (FDA21 CFR 177.1350)
Suitable for:
• Drinking water liners/bladders• Grain covers• Food containment• Covers in the Food industry
Reversible Blue/White colour
TECHNICAL SPECIFICATIONS
WIDTH 210cm
WEIGHT 670gsm
BASE CLOTH 833 Decitex H/T Polyester
SURFACE FINISH EVA Reversible Food Grade (FDA 21 CFR 177.1350)
TEAR STRENGTH Warp/Weft 485 / 560 N
TENSILE STRENGTH Warp/Weft 2370 / 2230 N
U/V STABILITY 3 year minimum
TEMPERATURE RANGE -20º/+50ºC
ROLL LENGTH 30m
FABRICATION METHODS Hot Wedge: Hot Air or High Frequency Welding: Sewing
FABRIC CARE OFPANZ Care Label OF-1
Page 165
Industrial | Closed Cell Foam
P-FoamP-Foam is a cross-linked, expanded foam based on polyethylene polymer resin.
It is available in 30 kg/m3 Density
P-Foam performs particularly well where thermal insulation is critical, such as underlay and headliners, or cost-effectiveness is important, such as packaging.
Key features:
• Consistent quality• Thermoforming ability• Meets REACH regulations• Workability• Used in many high-end brands
Sheet size is 2000mm x 1000mm
Available in:
Blue and Black 3mm, 6mm, 9mm, 12mm, 20mm, 25mm, 30mm, 40mm, 50mm
Page 166
Industrial | Leather
Indian Leather Strapping
INDIAN LEATHER STRAPPING is a natural leather hide of dyed chrome leather used for making strapping.
Hides will vary usually from approx12sqft to 21sqft
3.5 - 4.5mm Thickness variation
Industrial | Equestrian
Page 167
Horse Cover Lining RW500
Horse Cover Lining White RW 500
HORSE COVER LINING RW500 is a needled punched recycled wool lining for horsecovers.
500gsm x 1600mm wide (30m rolls)
HORSE COVER LINING White RW500 is a needled punched recycled wool lining for horsecovers.
500gsm x 1600mm wide (30m rolls)
Page 168
Industrial | Equestrian
Girth Sponge
Cavallino Tearlok Breeze
GIRTH SPONGE is a neoprene fabric with a knitted polyester tricot backing, and soft PVC embossed surface, traditionally used as a outer padding for a girth strap on horses
GIRTH SPONGE has also found it’s way into many other applications.
Available in: Black and Brown.4.0mm thick x 137cm Wide
Cavallino Tearlok Breeze is a summer weight horse cover canvas.
TECHNICAL SPECIFICATIONS
WIDTH 205cm
WEIGHT 273gsm
BASE CLOTH 65% Polyester / 35% Cotton
TENSILE STRENGTH Warp/Weft 1145N / 1055N (AS 2001.2.3)
TEAR STRENGTH Warp/Weft 104N / 109N (AS 2001.2.10)
U/V STABILITY 5 Years
FABRICATION METHODS Sewing
FABRIC CARE OFPANZ Care Label OF-5