INDUSTRIAL AUTOMATION PRODUCT GUIDE

INDUSTRIALAUTOMATIONPRODUCT GUIDE

ASEM S.p.A.

ASEM | Artegna | Headquarters Via Buia 433011 Artegna (UD) | ItaliaPhone: +39/0432-9671Fax: +39/0432-977465

ASEM | GiussanoVia Prealpi 13/A20833 Giussano (MB) | ItaliaPhone: +39/0362-859111Fax: +39/0362-859121

ASEM | GermanyWalbenstraße 4172127 Kusterdingen-WankheimPhone: +49 (0) 7071 7963 070Fax: +49 (0) 7071 7963 071

email: [email protected]: www.asem.it

SALES NETWORK

ITALYGERMANYSWITZERLANDAUSTRIASLOVENIAARGENTINABELGIUMBRAZILCZECH REPUBLICFRANCEGREECEHOLLANDMIDDLE EASTNORWAYPOLANDSPAINSWEDENTURKEYUNITED KINGDOM

V. 14

HMI SOLUTIONS

3

COMPANY _ 4

PRODUCT FAMILY PORTFOLIO _ 6

New ASeM STANDARDS _ 9

OPeN AUTOMATION SYSTeMS _ 10

UBIQUITY _ 10

PReMIUM HMI 4 _14

HMI25 _ 17

HMI30 _ 18

HMI600 _ 20

HMI700 _ 21

HMI1100 _ 22

HMI1200 _ 23

LP30-31 _ 24

RACK PC

PR4045 | PR4145 _ 76

PR4046 | PR4146 _ 77

VeSA PC

VPK300 _70

VPC15 _ 72

BOX PC FANLeSS

SMARTBOX _ 50

B-ONe 300 | B-ONe 300 wM _ 52

PB300_54

PB1200 _ 56

PB2000 _ 58

PB3000_60

MONITOR

MH _ 82

MT _ 84

MV15 _ 86

BOX PC PeRFORMANCe

PB1300 _ 62

PB650 _ 64

PB5000_66

CUSTOM LIGHT / FULL SOLUTIONS _ 88

SUPPORT & SeRVICeS _ 89

CONTACTS _ 90

ASeM operates in the Industrial Automation market designing and manufacturing a wide range of Industrial PCs, HMI and PAC (Programmable Automation Controller) solutions based on PC x86 and ARM Cortex hardware platforms.

ASEM reserves the right to apply modifications, corrections and/or improvements to the products and programs described, at its own discretion and at any time, without providing any advance notice to the users. Premium HMI®, NeTcore®, Ubiquity® are ASeM registered trademarks.

Table of content

PANeL PC PeRFORMANCe

OT1300 _ 40

FT650 | FT650-Te _ 42

HT5000_44

P-CAP MULTITOUCH TRUe FLAT_ 47

GLASS-FILM-GLASS _ 47

ALUMINUM TRUe FLAT_46

STAINLeSS STeeL TRUe FLAT_46

PANeL PC FANLeSS

OT600 _ 28

OT1100 _ 30

OT1200 _ 32

HT700 _ 34

HT2000 _ 36

HT3000 _ 38

Asem Digital Automation TechnologiesFounded in 1979 by Renzo Guerra, current President and CeO, ASeM S.p.A. is one of the leading european companies involved in the process of technological convergence and digital integration between Information Technology and Industrial Automation.

experienceSince 1979 ASeM has experienced the digital information technology evolution gaining a deep knowledge in the development of “Open PC Automation” systems.

Technical competencesLong experience and consolidated know-how in design, engineering and manufacturing of IPCs, HMI, Control and Remote Assistance Solutions.

wide product portfolioThe most complete range of Industrial PCs (Panel PC, Box PC, Rackmount PC, embedded solutions) integrated with HMI, Control and Remote Assistance software.

Customer oriented philosophyMarket driven approach with great attention to customer needs from the first contact to after-sales assistance.

Reliability and continuitySince 2000 ASEM is the italian leader and one of the first european companies in the Industrial PC market.

InnovationTechnological excellence continuity is ensured by annual investments of 10% of the turnover in R&D activities that involve 30% of the employees.

Leading the “Open PC Automation” philosophy in Italy, ASEM designs and manufactures systems and solutions based on open & standard PC architectures and embedded technologies. The company operates in the Industrial Automation market and plays an important role as a trusted partner offering complete solutions that integrate HMI, Control and Remote Assistance software within open and flexible architectures.

ASEM in figures: - € 22 million revenue in 2012- 130 employees- Headquarters in Artegna (UD) 5,200 sqm- Local manufacturing unit of 3,250 sqm in Artegna (UD)- R&D unit in Verona- R&D unit in Giussano (MB)- Sales unit in Germany

54

AzIeNDA

Company and markets Key winners

OT1100

| ATOM z5X0P |

| p.30 |

LP30-31

| p.24|

PB1300 PB650 PB5000

| CelM/PM | | P/C2D | | Core i3/i5/i7 - Celeron |

| p. 62 | | p. 64 | | p. 66 |

Ubiquity Ubiquity Router

| p. 10 | | p. 13 |

OT600

| LX800 |

| p. 28 |

OT1200 HT 700 HT 2000

| CelM | | ATOM e6xx | | ATOM D2550 dual core |

| p.32 | | p. 34 | | p. 36 |

OT1300 FT650 FT650-TE

| CelM/PM | | P/C2D | | P/C2D |

| p. 40 | | p. 42 | | p. 42 |

PB1200 PB2000 PB3000

| CelM | | ATOM D2550 dual core | | Core i3/i5/i7 - Celeron |

| p. 56 | | p. 58 | | p. 60 |

MH MT MV15

| p. 82 | | p. 84 | | p. 86 |

Software HMI HMI aRM HMI x86

| p. 14 | | p. 17 | | p. 20 |

VPK300 VPC15

| p. 70 | | p. 72 |

TFX Stainless Steel TFM Multitouch

HT5000

| Core i3/i5/i7 - Celeron |

| p. 46 || p. 44 | | p. 47 |

SMaRTBOX B-OnE PB300

| LX800 |

| p. 50 | | p. 52 | | p. 54 |

| ARM Cortex A8 |

VeSA PCs are compact, fanless, ergonomic systems providing installation flexibility and a stylish design. Based on ultra low voltage Atom processors, they are available with plastic or aluminium with polyester surface finishing front panel.

Low power consumption Panel PC systems, without ventilation, featuring Atom, Celeron ULV, Core i3, i5, i7 processors, with 6,5” to 21,5" LCDs and front panels in

Panel PC systems providing computing power and high graphics capabilities with Pentium M, Core 2 Duo and Core i3, i5, i7 processors, with 8,4” to 21,5” LCDs

Box PC systems based on Atom, Celeron ULV and Core i3, i5, i7 processors, for wall or DIN rail mounting.

Aluminium, Aluminium True Flat, Stainless Steel True Flat with resistive touch and Aluminium True Flat with retro-projected capacitive Multitouch.

and front panels in Aluminium, Aluminium True Flat, Stainless Steel True Flat with resistive touch and Aluminium True Flat with retro-projected capacitive Multitouch.

Hardware + software solutions to meet every visualization and supervision need.

Hardware + software solutions to meet control and industrial communication needs of plants and machinery.

Industrial LCD Monitors from 8,4” to 21,5”, for panel, VeSA or rack mounting. Available with aluminium, aluminium True Flat, stainless steel True Flat with resistive touchscreens and Aluminium True Flat with retro-projected capacitive Multitouch front panels.

Box PC systems based on Pentium M, Core 2 Duo, Core i3, i5, i7 processors, for wall or DIN rail mounting, that ensure high computing power and high level graphics.

| p. 76 |

| p. 77 |

| ATOM z5X0P |

| ATOM z5X0P || ATOM z5X0P |

| ATOM z5X0P |

| ARM Cortex A8 |

PR4146 | i3/i5/i7

4U 19” rack solutions, with a wide choice in terms of configurations, processors, motherboards and expansion slots. Intel Core i3, i5, i7 processors provide high computing power and high perfomance for data storage applications.

HT 3000

| Core i3/i5/i7 - Celeron |

| p. 38 |

7 8

PR4046 | i3/i5/i7

Remote assistance ease of use

Remote machine commissioning No additional hardware required

Application updates and maintenance Available for win 32/64 and win Ce platforms

PLCs and automation devices debug SS/TLS protocol encryption and use of certificates

Remote desktop, remote process viewer, file management, chat… Uses the existing internet connection

Preventive and predictive maintenance

UbiquityControl Center

Firewall Firewall

Firewall

Ethernet Devices

Serial Devices

PLC

PLC

VPN Tunnel

WAN WAN LAN

WIN 32/64WIN CE

UbiquityRuntime

UbiquityServer Infrastructure

Ubiquity’s remote connection diagram: access via VPN to the remote system and to the ethernet and Serial devices connected to the system sub-network

Control Center Domain

Runtime

Server Infrastructure

Ubiquity Control Center Control Center is installed and executed on the remote assistance PC and allows to manage the domain, the users and their privileges, and the connection with remote devices.

Ubiquity DomainUbiquity Domain is the “customer account” to make use of Ubiquity infrastructure and services.

Ubiquity Runtime The runtime is the software component installed and executed on the remote IPC/HMI/controller that supervises or controls the automation process. It requires neither additional hardware nor network configuration and it uses the existing Internet connection.

Runtime component is available in Basic and PRO versions for WIN CE and WIN 32/64 operating systems. The Basic version provides access to the IPC/HMI/remote controller and provides

Ubiquity Domain is available in three different versions: Single Entity-Single Access, Single Entity-Multi Access and Multi Entity-Multi Access. Single Entity Domains are

remote-desktop, remote task manager, remote file manager and chat with the remote operator. The PRO version enables also the access to all the automation devices (PLCs, drives, etc.) connected to the

accessible by users of one only company, Multi Entity Domains are accessible by users of different companies. Single Access Domains give access to Ubiquity

Ethernet or Serial subnetwork of the IPC/HMI/remote controller.

Ubiquity Server InfrastructureCommunication between Control Center and Runtime is ensured by a redundant server infrastructure built and maintained by ASeM which uses state-of-the-art security technologies for data exchange such as SSL/TLS, public key cryptography, safe, fault tolerant and redundant server farms to secure data privacy and adequacy.

Ubiquity 3 Runtime Windows CE Win32/64Basic Pro Basic Pro

Remote desktop, file & task management, chat, screenshot ■ ■ ■ ■VPN to the remote device ■ ■ ■ ■VPN with access to the Ethernet sub-network of the device/router No ■ No ■VPN with access to the Serial sub-network of the device/router No ■ No ■Integrated firewall ■ ■ ■ ■API to interface proprietary software applications ■ ■ ■ ■Runtime operations persistent log ■ ■ ■ ■Multiple connections from different Control Center ■ ■ ■ ■Structured Domain creation, users and remote devices management ■ ■ ■ ■Internet connection via PROXY for Control Center e Runtime ■ ■ ■ ■Functioning in local network without license ■ ■ ■ ■Runtime update procedure with automatic shutdown and restart of services ■ ■ No No

Ubiquity Domain typesSingle Entity-Single Access Single Entity-Multi Access Multi Entity-Multy Access

Domain accessible by Users of one company Users of one company Users of more companiesRemote assistance services enabled for One user per time More users at the same time More users at the same time

Runtime versions

Domain types infrastructure and services to one user at a time, Multi Access Domains give access to Ubiquity infrastructure and services to more users at the same time.

119 10

OPeN AUTOMATION SYSTeMSNew ASeM STANDARDS

UBIQUITYTHe New ASeM STANDARDS FOR PANeL PCs, HMI and MONITORS

VDC, in

GalvanicIsolation

+ +

- -

VDC, out

A UNIQUe CUT-OUT FOR eACH DIFFeReNT SIze OF LCD TO eNSURe:

• Interchangeability among different Panel PC, HMI and Monitor families

• Future mechanical compatibility

UNINTeRRUPTIBLe POweR SUPPLY INTeGRATeD IN THe INTeRNAL POweR PACK

• With external battery pack - rear of the system mounting

• With external battery pack - standalone wall mounting

FRONT PANeL AVAILABLe IN FOUR DIFFeReNT VARIANTS FOR ALL New FAMILIeS:

• Aluminum with USB port

• Aluminum True Flat with USB port

• Stainless steel True Flat

• Aluminium P-CAP Multitouch

ISOLATeD POweR SUPPLY wITH GALVANIC ISOLATION TO PReVeNT:

• Common mode noise at low/medium frequencies on the power supply line

• Ground loop noise

• Extra-voltage caused by lightning

AND TO GUARANTee

• Power supply with grounded positive terminal (e.g. Japan)

New ASeM STANDARDS

FOUR FRONT PANeL VARIANTS

NEW ASEMSTANDARDS

Aluminum P-CAP MultitouchAluminum True Flat with USB portStainless steel True FlatAluminum with USB port

ASEM has defined the new standards for Panel PC, Box PC and Monitor families to guarantee maximum flexibility, greater safety and the continuity essential in the industrial automation market.

• Non-volatile memory for system identification data storage

ASeM SYSTeM IDeNTITY

Proprietary VPNDifferently from VPNs based on the IP layer, Ubiquity VPN works on the data-link layer bringing concrete advantages:

Remote assistance PC becomes part of the remote host network using the same physical IP addresses

Remote assistant can use broadcast-based protocols

It is not necessary to configure the gateway of the remotely accessed devices. The remote assistant connection appears as a locally connected IP.

Full compatibility with the existing firewallsUbiquity Control Center and Ubiquity Runtime connection are automatically configured using outbound connections which are recognized as safe and therefore allowed by firewall policies.

Benefits: No need to configure

the end-user’s firewall and network. Only an outbound connection is necessary.

Ubiquity automatically uses enabled TCP and UDP protocols and can use HTTP, HTTPS or custom ports, ensuring compatibility with existing IT policies.

Remotation of Serial CommunicationUbiquity installs a virtual serial port on the Control Center PC. This virtual serial port can be mapped on a physical port of the remote device executing Ubiquity Runtime.

Benefits: Possibility to carry out

supervision and diagnostics tasks on remote serial devices.

Multi-clientUbiquity Runtime supports multiple concurrent connections from different supervisors whether with interactive session (remote desktop, file transfer, etc) or in VPN. Control Center can activate multiple interactive

sessions with different devices and only one VPN connection to a remote device.Benefits:

Maximum productivity being able to operate simultaneously on the same system.

UBIQUITY ROUTeR FAMILY

OPeN AUTOMATION SYSTeMS

1312

UBIQUITY Highlights

Industrial SecurityUbiquity infrastructure uses the highest network security standards, such as:

SSL/TLS protocol via UDP or TCP

Asymmetric cryptography

and X509 certificates for authentication sessions

Symmetric cryptography for data transimission

Message authentication codes (MAC) for data integrity.

Statistic and AuditUbiquity records and stores on the Domain all the remote access activities.

Benefits: The network administrator

can verify anytime the post-sales support workload, the accuracy of the jobs carried out and get statistics for customers, PCs and operators.

Integrated firewallUbiquity’s integrated firewall allows to control communication packets passing through the VPN. Introducing firewall policies, it is possible to filter Ethernet datagrams depending on communication protocols and target addresses.

The server infrastructure provides a library of policies that can be imported into the Domain and applied to devices and folders. Filtering rules can be assigned to single users or group of users.Benefits:

Increased security and bandwidth control

Increased flexibility in access permissions.

Access profiling and controlUbiquity allows the creation of an unlimited number of users, user groups, device groups, each with different access rules.Permissions can be flexibly configured up to the single device or folder: possibility to create local and global users, and sub-domains.

Benefits: Users can implement

their own organizational structure (made up of users, administrators, power-users, third parties, limited users, etc.) to reach in a flexible and controlled way all customers around the world

Access to remote devices is properly secured and restricted to the required personnel.

Remote desktopControl center includes remote desktop function.Benefits:

No need to activate RDP services or to install optional utilities like VNC.

File exchangeControl Center includes a complete tool to perform remote files download and upload.Benefits:

No need to open shared folders or to install optional utilities like FTP servers.

ChatControl Center and Runtime include a chat.Benefits:

Instead of using the phone to communicate with remote operators, the user can simply take advantage of Ubiquity chat and reduce costs.

Full support of Embedded platformsUbiquity Runtime is available for the following operative systems:

Windows XP, Vista, 7, 8 (32 and 64 bit)

Windows Embedded Standard 2009, Windows Embedded Standard 7E and 7P

Windows CE 5.0, 6.0, Windows Embedded Compact 7.0

Ubiquity Routers complete the range of Remote Assistance Solutions with a combined hardware + software solution that ensures remote access and remote monitoring functionalities on every automation device.

With the built-in 2G/3G/3G+ modem of RK11 and RM11 it is possible to reach and monitor also plants and automation networks without a wired Internet connection.

Ubiquity software creates a VPN between the Control Center PC and the router enabling access to automation devices connected via Ethernet and Serial ports. The features of Premium HMI, ASEM’s HMI software, enable additional remote monitoring functionalities that allow RM10 and RM11 to directly access controller’s memory and perform data sampling, archiving and monitoring for the eventual delivery of alerts and notifications.Ubiquity Routers bring remote assistance services on plants and machinery

where it would have not been possible to install the Ubiquity software solution, as automation systems with HMI/IPC/controller with operating system other than WIN 32/64 and WIN CE, machinery controlled only by serial devices without Ethernet interface and even machines and plants without a wired internet connection.Furthermore Ubiquity Routers separate the automation devices from the external Internet connection adding a further protection to the Local Area Network.

For further Information please check the Remote Assistance Solutions Catalogue or visit bit.ly/UBQENG

ROUTER

Ubiquity RK and RMRemote access and monitoring have no limits

HMI

Operating system

HW architecture

Software

HMI 1100

ARM

Win32/64

X86

Premium HMI 4, due to its new powerful graphics rendering engine, supports Microsoft ® XAML technologies and enables new sophisticated visualization techniques typical of the latest generation ”mobile” devices.All projects developed with the previous versions are fully compatible and can be automatically converted in the new version.PHMI 4 ensures maximum transversality between Win CE and Win 32/64 operating systems, and between PC/X86 and ARM hardware platforms.

WinCE

HMI 1200HMI 25 HMI 30 HMI 600 HMI 700

Highlights New visualization technologies Compatibility

• Integrated WEB Server • XAML graphic objects • Full compatibility with previous versions• Datalogger based on XML DB and SQL Server • New and powerful graphics rendering engine • Simple conversion of project’s graphics• Development of projects compatible with CFR21 Part 11 regulations

• 16 million colors graphic objects

• High quality vector graphics • Transparency effects

• Historical and dynamic trends • Sophisticated shading effects

• Communication drivers for common PLCs, inverters and temperature regulators

• New pointing gestures

• Mobile App for iOS and Android

PHMI 4 winCe runtime

Basic AdvancedMinimum RAM required 512MB 512MBI/O Bytes (Tags) 1024 4.096Alarms 512 2.048Data Loggers Max 2Multi-Drivers Max 2 Max 4SMS/e-mailsweb Server 2 User

PHMI 4 win32/64 runtime

Basic Pro AdvancedMinimum RAM required 1GB 1GB 1GBI/O Bytes (Tags) 2.048 2.048 4.096Alarms 2.048 2.048 2.048Data Loggers Only 2 and not on databaseMulti-Drivers Max 2 Max 2 Max 4SMS/e-mailsweb Server Max 2 connected VBA MultithreadingActiveX- OCXCFR21 part 11Power TemplatesNetworking RASSupporto applicazione Mobile

Trasversality and scalability

• Operating systems: WinCE and Win32/64

• Hardware platforms: PC/X86 and ARM


1514

PReMIUM HMI 4 PReMIUM HMI 4 RUNTIMe

FeATUReS | PLUS


1716

PReMIUM HMI 4 DRIVeRS HMI SOLUTIONS win Ce

HMI25HMI 25 is a cost-effective, entry level ARM-based

solution equipped with a 1GHz ARM Cortex A8

processor and Microsoft windows embedded

Compact 7 PRO operating system. It integrates the

different and advanced features of Premium HMI 4

software platform, in Basic and Advanced version,

and the remote assistance software ASeM Ubiquity.

HMI 25 is available with 4,3” and 7” wide 16 million

colors TFT LeD Backlight LCDs, 4 wires resistive

touchscreens and Aluminium and Aluminium True

Flat front panels.

PReMIUM HMI 4 SOFTwARe PLATFORM: • INTEGRATED WEB SERvER • DATALOGGER ON DB XML AND SQL SERvER • CFR21 PART 11 COMPLIANCE • HIGH LEvEL vECTOR GRAPHICS • HISTORICAL AND DyNAMIC TRENDS • WIDE RANGE OF COMMUNICATION DRIvERS • MOBILE APP FOR IOS AND ANDROID

UBIQUITY ReMOTe ASSISTANCe SOFTwARe INTeGRATeD: ReMOTe ACCeSS TO THe HMI’S eTHeRNeT AND SeRIAL SUB-NeTwORKS

UL 508 LISTeD COMPONeNT CeRTIFICATION

IP66K FRONT PANeL PROTeCTION RATING

Interface

Operating System

Win CE Win 32/64

Protocolli/dispositivi Seriale ethernet Add-on ARM x86 x86

Codesys, ELAU, KEB, PARKER,…

Rockwell DF1 and Data Highway

Rockwell ethernet IP

Applicon cards Applicon cards

B&R PVI with protocol INA2000 (1)

BACNeT IP

Beckhoff Twincat (ADS protocol) (2)

CANOpen Master NeTcoreX CANOpen Master

CANOpen Slave solo PDO NeTcoreX CANOpen Slave

KNX (eIBUS Konnex)

eLAP

Ge FANUC SNP-X

Hilscher DPM in PROFIBUS,CANOPeN, DeVICeNeT CIF cards

Hilscher MPI CIF card

Hilscher NeTLINK

Hilscher NeTX MPI NeTCoreX MPI

Hilscher NeTX PROFIBUS Slave NeTCoreX PROFIBUS SLAVe

Hitachi PLC serie H

IBH Softech

KeB DIN66109II

LeNze LeCOM AB

Lonworks

Mitsubishi MeLSeC A

Mitsubishi MeLSeC FX

Mitsubishi MeLSeC Q

Mistubishi FX3U TCP

Modbus RTU Master / Slave

Modbus TCP IP

Moeller SUCOM

OMRON FINS

OMRON Host Link

PANASONIC FP MewTOCOL

ROBOX

SAIA via SCOMM DLL

SAIA S-BUS

SCHNeIDeR UNITeLwAY SLAVe

SIeMeNS MPI PC ADAPTeR

SIeMeNS S5 CPU RS-232 to Current Loop Cverter

SIeMeNS S5 DK3864R

SIeMeNS S7 200 PPI

SIeMeNS S7 300/400 MPI COM port predisposition

SIeMeNS S7 TCP 300/400/1200 (4)

SIeMeNS SAPI S7 SIeMeNS CP5611, 5613, 5614, 5412 e SIeMATIC NeT

Aluminium front panel

Aluminium True Flat front panel

(3)

(1) requires PVI communication driver libraries from B&R (2) requires ADS communication driver libraries from Beckhoff (3) Only OT600/HMI600/Smartbox (4) communication with S7-1200 controllers is supported only with absolute addressing (no symbolic)

4,3” 7”wARM-A8

Alu 24VDC

512MB

Res 4Alu TF weC7

electrical characteristics

Mechanical characteristics

warranty & Approvals

Integrated system software

Premium HMI 4

Touchscreen Motherboard

CPU

Graphic

System memorySerial interfaces

Ethernet interfaces

USB interfaces

Mass storage

Battery

Buttons, leds and keys

Power supply Case

Front panel

Measurements mm

Temperature

Humidity UL

CE

Warranty

Operating System HMI Remote control

I/O Bytes (Tags) Alarms Data Loggers on SQL db for Ce Multi-Drivers SMS/e-mails web Server

System Size Type Resolution Colors Backlight Luminance Contrast Viewing angle L:R/U:L (typ.) Lifetime (min.)

Technology HM25 / HMI30 HMI25-TF / HMI30-TF

Model RTC watch-dog Buzzer

Processor Memory bus

Controller

Type / Size / Socket

Type Optoisolation

Type

Type

Internal / not removable external Access / Removable

Type Lifetime

Reset buttons LeDs

Type Input voltage Protections Power consumption μUPS (optional for HMI30) Type Material

Protection Construction Color

4,3” 5,7” 7”w 8,4” 10,4” 12,1” 15”15,6”

Operation Storage

Operation/Storage Marks Safety Certificate N°

emission Immunity Safety

Management Standard extended

windows embedded Compact 7 PRO (C7P) Premium HMI 4 runtimes (BASIC, ADVANCeD versions) ASeM Ubiquity runtime (PRO-eth version)

BASIC 1.024 512 Max 2 Max 2 No No

HMI25 4.3” Color LCD TFT 480x272 16M LeD 400 cd/m2 250:1 130°:90 50.000h

4 wires – analog - resistive Overlaminated with OCA (Optical Clear Adhesive)

HMI25 / HMI25-TF All-in-one, ASeM R132 Hardware with battery Time programmable Yes

ARM Cortex A8 – 1 GHz 400MHz

GPU with integrated LCD controller

512 MB, DDR3-800 / Soldered

1 x RS232/422/485 (DB15M) software selectable /compatible MPI 187Kbit/s (Siemens S7-300/S7-400) No

HMI25 / HMI25-TF 1 x 100Mbps (RJ45) with Link/Activity led

HMI25 / HMI25-TF 1 x USB 2.0 (rear, TYPe-A, host port, single channel software switch off)

NAND-FLASH: - 256 MB (Read Only) for O.S. eMMC 2 GB - 8 bit v. 4.4 compatible (File System organization)

Only for HMI30: SD/SDHC card slot V. 2.0 (push-push type)

Coin (CR2032 3V) removable 3 years

System Power / Removable Storage activity

Integrated on board, auto ranging 18÷36 VDC with 3 poles connector Anti-inversion polarity, over-voltage, fuse [email protected]” / 6.7w@7,0” / 7.0w@8,4” / 9.0w @10,4” / 14.0w @12.1” / 15.5w @15,0” Backup for microinterruption with supercapacitors • Max interruption: 500ms • First load: 3’ • Rear time: 30”

Panel mount Steel, zinc galvanization

HMI25 / HMI30 IP66K, enclosure type 4X (Indoor use only) Full Aluminium alloy -

Aluminium (w x H x D) 140 x 95 x 30 175 x 145 x 40 215 x 155 x 40 255 x 190 x 48.5 295 x 230 x 48.5 325 x 260 x 48.5 390 x 305 x 48.5420 x 265 x 48.5 0° ÷ +50°C -20° ÷ +60°C

80% (non-condensing) Conforms to UL-508 (1 UL - Standard for Industrial Control equipment) e356364

Conforms to eN 55022 Information technology equipment – Radio disturbance characteristics Conforms to eN 61000-3-2 – Limits for harmonic current emissions Conforms to EN 61000-3-3 – Limits of voltage fluctuation and flicker Conforms to eN 55024 Information technology equipment – Immunity characteristics Conforms to eN 60950-1 – Information technology equipment – Safety

By ASeM headquarters 12 months 18 / 24 / 36 months (optional)

ADVANCeD 4.096 2.048 Unlimited Max 4 Yes Max 2 client simultanously

HMI25 / HMI30 7” w Color LCD TFT 800x480 wVGA 16M LeD 500 400:1 70°:70°/60°:60° 40.000h

HMI30 5,7” Color LCD TFT 640x480 VGA 256K LeD 500 cd/m2 250:1 70°:70°/45°:55° 40.000h

System software characteristics

System Hardware characteristicsHMI30 8.4” Color LCD TFT 800x600 SVGA 16M LeD 250 600:1 75°:75°/60°:70° 50.000h

HMI30 / HMI30-TF All-in-one, ASeM R131 Hardware with battery Time programmable Yes

HMI30 / HMI30-TF 1 x 100Mbps (RJ45); 1 x 10/100Mbps (RJ45) with Link/Activity led

HMI30 / HMI30-TF 2 x USB 2.0 (rear, TYPe-A, host port, single channel software switch off)

5 wires – analog resistive

HMI30 10.4” Color LCD TFT 800x600 SVGA 16M LeD 400 700:1 80°:80°/60°:80° 50.000h

HMI30 12.1” Color LCD TFT 800x600 SVGA 16M LeD 500 800:1 80°:80°/80°:60° 100.000h

HMI30 15” Color LCD TFT 1024x768SXGA 16M LeD 450 700:1 80°:80°/70°:70° 40.000h

HMI30 12.1” Color LCD TFT 1024x768 SXGA 16M LeD 600 700:1 80°:80°/70°:70° 50.000h

HMI30 15,6” Color LCD TFT 1366x768 SwXGA 16M LeD 300 500:1 85°:85°/80°:80° 50.000h

weight (Kg) 0,7 0,9 1,2 1,4 1,8 2,1 3,3 3,2

Cutout (w x H) 131 x 86 164 x 134 204 x 144 243 x 179 283 x 219 313 x 249 378 x 294410 x 255

HMI25-TF / HMI30-TF IP66K, enclosure type 4X (Indoor use only) Aluminium alloy True Flat frame with polyester foil PANTONe Cool Grey 4C

True Flat Alu (w x H x D) 140 x 95 x 30 175 x 145 x 40 215 x 155 x 40 255 x 190 x 48.5 295 x 230 x 48.5 325 x 260 x 48.5 390 x 305 x 48.5420 x 265 x 48.5

enviromental characteristics

HMI SOLUTIONS


18

HMI SOLUTIONSHMI SOLUTIONS win Ce


Aluminium front panel

HMI 30 is an ARM-based solution with an excellent

price/performance ratio. It is equipped with a

1GHz ARM Cortex A8 with Microsoft windows

embedded Compact 7 PRO operating system.

It integrates the different and advanced features

of Premium HMI 4 software platform, in Basic and

Advanced version, and the remote assistance

software ASeM Ubiquity. HMI 30 is available with

16 million colors TFT LeD Backlight LCDs, with

sizes ranging from 5,7” to 15” in 4:3 aspect ratio,

and 7” and 15,6” in wide format, 4 wires resistive

touchscreens and Aluminium and Aluminium True

Flat front panels.

HMI30



eXTeRNAL-ACCeSS SD SLOT



FeATUReS | PLUS

15,6”

Res 5

15”12.1”10.4”5,7” 7”w 8,4”ARM-A8

Alu 24VDC

512MB

Res 4Alu TF weC7

20 21

HMI SOLUTIONS win Ce


For software detailsSee p.14

For hardware detailsSee p.28

HMI SOLUTIONS win Ce - win 32/64



HMI 600 is an entry-level, cost-effective

PC-based solution equipped with a 500

Mhz AMD GeODe LX800 processor and

Microsoft windows Ce 6.0 PRO operating

system. It integrates the different and

advanced features of Premium HMI 4

software platform, in Basic and Advanced

version, and the remote assistance

software ASeM Ubiquity.

HMI 600 is available with 256 K colors TFT

LeD Backlight LCDs, with sizes ranging

from 6,5” to 12,1” in 4:3 aspect ratio, 4

and 5 wires resistive touchscreens and

aluminium front panels.

HMI 700 is a PC-based solution with an

excellent price/performance ratio.

It is equipped with the Intel ATOM Tunnel

Creek platform, 1 GHz e640 and 1,6 GHz

e680 processors and Microsoft windows

embedded Compact 7 PRO operating

systems.

It integrates the different and advanced

features of Premium HMI 4 software

platform, in Basic and Advanced version,

and the remote assistance software

ASeM Ubiquity.

HMI 700 is available with 16 million

colors TFT LeD Backlight LCDs in 6,5”

and 15” in 4:3 aspect ratio and from 7”

to 18,5” in wide format, 5 wires resistive

touchscreens and aluminium and

aluminium true flat front panels.

HMI600 HMI700



IP65 FRONT PANeL PROTeCTION RATING





FeATUReS | PLUS

FeATUReS | PLUS

6,5” 8,4” 12,1” LX800Alu

24VDC12VDC Ce6MiniPCI

512MBRes 5Res 4

24VDCMiniPCIRes 5 Alu TF

2GBATOM-e6xx 1GB

18,5”w15,6”w15”12,1”x12,1”6,5” 7”w 8,4”

weC7

Alu






2322

HMI SOLUTIONS win 32/64HMI SOLUTIONS win 32/64

HMI1100 is a PC-based solution with an


It is equipped with Intel ATOM z5xxP

processors and Microsoft windows

embedded Standard (XP) operating systems.


features of Premium HMI 4 software platform,

in Basic and Advanced version.

HMI 1100 is available with 16 million colors

TFT LeD Backlight LCDs with sizes ranging

from 12,1” to 19” in 4:3 aspect ratio, 5 wires

resistive touchscreens and aluminium with

polyester finish surface front panels.

HMI 1200 is a PC-based solution with an


It is equipped with Ultra Low Voltage Intel

Celeron processors and Microsoft windows

embedded Standard (XP) operating systems.


features of Premium HMI 4 software platform,

in Basic and Advanced version.

HMI 1200 is available with 16 million colors

TFT LeD Backlight LCDs, from 8,4” to

19” in 4:3 aspect ratio, 5 wires resistive

touchscreens and aluminium with polyester

finish surface front panels.

2GB1GB

19”17”15”12,1”x8,4” 10,4” 12,1”

Alu

weS

Res 5 UPS24VDC

CelM

HMI1100 HMI1200




UL 6950-1 LISTeD COMPONeNT CeRTIFICATION


FeATUReS | PLUS

FeATUReS | PLUS

19”12,1” 15” 17”

Alu 24VDC

weS

MiniPCI

2GB1GB

Res 5

ATOM

Alu TF

FeATUReS | PLUS

The Panel PAC LP30/31 families combine HMI,

control and remote assistance features. Based

on windows embedded Compact 7 PRO, they

integrate the different and advanced features of

CODeSYS SoftPLC 3.5 Premium HMI 4 software

platform and the remote assistance software

ASeM Ubiquity.

LP30/31 are available with a wide range 16

million colors TFT LeD Backlight LCDs sizes, with

aluminium and aluminium true flat front panels.

Integrating CODeSYS SoftPLC, Panel PACs

LP30/31 are able to manage fieldbus master

etherCAT, Modbus TCP/IP, Modbus RTU (serial) e

CANopen (LP31) to control automation devices.

LP30/31 are an entry-level, cost-effective

solution that meets all automation requirements

previously solved with the traditional PLC +

Operator Panel architecture.

CODeSYS SOFTPLC FOR CONTROL APPLICATIONS: • FIELDBUS MASTER ETHERCAT, MODBUS TCP/IP, MODBUS RTU (SERIALE) E CANOPEN (LP31) • 64 KByTE RETENTIvE DATE MANAGED THROUGH MICROUPS

PReMIUM HMI 4 VISUALIzATION SOFTwARe PLATFORM

UBIQUITY ReMOTe ASSISTANCe SOFTwARe INTeGRATeD:ReMOTe ACCeSS TO THe HMI’S eTHeRNeT AND SeRIAL SUB-NeTwORKS

eXTeRNAL-ACCeSS SD SLOT



ARM-A8

Alu

uUPS24VDC weC7512MB

Res 5Res 4

Panel PAC Solutions


24


LP30LP31

System Software characteristics

Integrated system software

Operating System windows embedded Compact 7 PRO (C7P)SoftPLC CODeSYS SPv3.x runtimeHMI Premium HMI 4 runtimes (BASIC, ADVANCeD versions)Remote assistance ASeM Ubiquity runtime (PRO version)

CODeSYS SP v3.x Supported protocols etherCAT Master, MODBUS TCP Master, MODBUS RTU Master, CANOpen MasterRetentive dataCycle timeJitterCPU occupationPHMI variables sensedDatalogging intervalSoftMotion -

Premium HMI4 BASIC ADVANCeDI/O Bytes (Tags)AlarmsData Loggers on SQL db for CeMulti-DriversSMS/e-mailsweb Server

1.024 512

Max 2Max. 2

NONO

4.0962.048

UnlimitedMax. 4

YesMax 2 client simultanously

64Kbyte with automatic backup, on eMMC, at every system switch-off and/or loss of the power supply> 10ms± 3msmax 25%max 512> 15s (included write time on DB)No

LP30/311 x RS232/422/485 (DB15M) software selectableNo

System Hardware characteristicsDisplay LP30 LP30/31 LP30/31 LP30/31 LP30/31 LP30/31 LP30/31

Size 5,7" 7" w 8.4” 10.4” 12.1” 12.1” 15”Type Color LCD TFT Color LCD TFT Color LCD TFT Color LCD TFT Color LCD TFT Color LCD TFT Color LCD TFTResolution 640x480 VGA 800x480wVGA 800x600 SVGA 800x600 SVGA 800x600 SVGA 1024x768SXGA 1024x768SXGAColors 256k 16M 16M 16M 16M 16M 16MBacklight LeD LeD LeD LeD LeD LeD LeDLuminance 500 cd/m2 500 350 400 500 600 450Contrast 250:1 400:1 600:1 700:1 800:1 700:1 800:1Viewing angle L:R/U:L 70°:70°/45°:55° 70°:70°/70°:60° 75°:75°/60°:70° 80°:80°/60°:80° 80°:80°/80°:60° 80°:80°/70°:70° 80°:80°/65°:80°Lifetime (min.) 40.000h 40.000h 50.000h 50.000h 100.000h 50.000h 50.000h

Touchscreen Technology Overlaminated with OCA (Optical Clear Adhesive)LP3x 4 wires – analog – resistive 5 wires – analog resistiveLP3x-TF 4 wires – analog – resistive 5 wires – analog resistive

Motherboard LP30/LP30-TF LP31 / LP31-TFAll-in-one, ASeM R133Hardware with batteryTime programmableYes

Model All-in-one, ASeM R131RTC Hardware with batterywatch-dog Time programmableBuzzer Yes

CPU Processor ARM Cortex A8 – 1 GHz ARM Cortex A8 – 800 MHzMemory bus 400MHz 400MHz

Graphic Controller GPU with LCD controller integrated

System memory Type/Size/Socket 512 MB, DDR3-800 / SolderedSerial interfaces

TypeOptoisolation

ethernet interfaces Type LAN1 Ethernet 100 Mbps (RJ45) * LAN2 Ethernet 10/100 Mbps (RJ45) with activity LED

USB interfaces Type 2 x USB 2.0 (rear, TYPe-A, host port, single channel software switch off)

CAN interfaces LP30----

LP31FlexCAN integrated controller1 optoisolated channel (500V)1 x DB9MRemovable; 120ohm

CAN controllerChannelsConnectorsTerminations

Mass storage interfaces Internal / not remo-vable

NAND-FLASH (512 MB): - 256 MB (Read Only) for O.S.eMMC max 2 GB - 8 bit v. 4.4 compatible (optional)

SD/SDHC card slot V. 2.0 (push-push type)external Access / Removable

Battery Type Coin (CR1220 3V) removableLifetime 3 years

Buttons, leds and keys Reset buttons SystemLeDs Power / Removable Storage activity

electrical characteristicsPower supply Type Integrated on board, auto ranging

Optoisolation Only for LP31Input voltage 18÷36 VDC with 3 poles connectorProtections Anti-inversion polarity, over-voltage, fusePower consumption [email protected]” / 6.7w@7,0” / 7.0w@8,4” / 9.0w @10,4” / 14.0w @12.1” / 15.5w @15,0”μUPS Backup for microinterruption with supercapacitors • Max interruption: 500ms • First load: 3’ • Rearm time: 30”

Mechanical characteristicsCase Type Panel mount

Material Steel, zinc galvanization

Front panel LP3x LP3x-TF(note 2) Protection IP66, enclosure type 4X (Indoor use only) IP66, enclosure type 4X (Indoor use only)

Construction Aluminum alloy Aluminum alloy True Flat frame with polyester foilColor - PANTONe Cool Grey 4C

Measurements Aluminium (w x H x D) True Flat Alu (w x H x D) Cutout (w x H) weight (Kg) mm 5,7” 175 x 145 x 40 175 x 145 x 40 164 x 134 0,9

7”w 215 x 155 x 40 215 x 155 x 40 204 x 144 1,28,4” 255 x 190 x 48.5 255 x 190 x 48.5 243 x 179 1,410.4” 295 x 230 x 48.5 295 x 230 x 48.5 283 x 219 1,812.1” 325 x 260 x 48.5 325 x 260 x 48.5 313 x 249 2,115” 390 x 305 x 48.5 390 x 305 x 48.5 378 x 294 3,315,6” - - - -

environmental characteristicsTemperature Operation 0° ÷ +50°C

Storage -20° ÷ +60°C

Humidity Operation/Storage 80% (non-condensing)

warranty & ApprovalsCe emission Conforms to eN 55022 Information technology equipment – Radio disturbance characteristics

Conforms to eN 61000-3-2 – Limits for harmonic current emissionsConforms to EN 61000-3-3 – Limits of voltage fluctuation and flicker

Immunity Conforms to eN 55024 Information technology equipment – Immunity characteristicsSafety Conforms to eN 60950-1 – Information technology equipment – Safety

UL Marks pendingSafety Conforms to UL-508 (1 UL - Standard for Industrial Control equipment)Certificate N° e356364

warranty Management By ASeM headquartersStandard 12 monthsextended 18 / 24 / 36 months (optional)

LP30/3115,6”Color LCD TFT1366x768wXGA16MLeD300500:185°:85°/80°:80°50.000h

15,6”15”12,1”7” w 8,4” 10,4”5,7”

26 27

Panel PC Fanless

Panel PC Performance

Low power consumption Panel PC systems, without ventilation, featuring Atom, Celeron ULV, Core i3, i5, i7 processors, with 6,5” to 21,5” LCDs and front panels in Aluminium, Aluminium True Flat, Stainless Steel True Flat with resistive touch and Aluminium True Flat with retro-projected capacitive Multitouch.

Panel PC systems providing computing power and high graphics capabilities with Pentium M, Core 2 Duo and Core i3, i5, i7 processors, with 8,4” to 21,5” LCDs and front panels in Aluminium, Aluminium True Flat, Stainless Steel True Flat with resistive touch and Aluminium True Flat with retro-projected capacitive Multitouch.

PANeL PC

28

HMI600OT600+Premium HMI

See p.20

FeATUReS | PLUS

Fanless





Display

Touchscreen Optional

Motherboard

CPU

Graphic

System memory

Serial interfaces

ethernet interfaces

USB interfaces

Compact Flash slots

Mass storage interfacesexpansion slotsBattery


Power supply

Case

Front panel

Measurements mm

Temperature

Humidity

Ce

UL

warranty

Size Type Resolution Colors Pixel pitch Backlight Luminance Contrast Viewing angle L:R/U:L Lifetime (min.)Technology Light transimission Lifetime Linearity deviation Interface Glass Film GlassModel Hw monitor watch-dogProcessor Cache SocketController MemoryType Size SocketType UART Transfer rate OptoisolationType UART Transfer rate OptoisolationType ControllerType Transfer rateType optional ParallelTypeType Removable LifetimeReset button LeDs

Type Input voltage Power consumption

Type MaterialProtection Construction

6,5” 8,4” 12,1”

Operation StorageOperation/Storage

emission

Immunity SafetyMarks Safety Certificate N°Management Standard extended

6,5” Color LCD TFT 640 x 480 (VGA) 256K 0,207 x 0,207mm LeD 800cd/m2 600:1 80°:80°/70°:70° 50.000h4 wires – analog - resistive 80% ±2% 35mln activations < 1 % Serial NoAll-in-one, ASeM MB831-V Temperature monitor Time programmableAMD LX800 500MHz 128KB L2 Soldered on boardIntegrated on board Shared - 2MB÷128MB system selectableDDR PC2700 512 MB, 1 GB 1 x SODIMM module1 x RS232 (DB9M) 16550 compatible (FIFO 16 byte) 115Kbps max No1 x RS-232/422/485 (DB15M) / compatible MPI 187Kbit/s (Siemens S7-300/S7-400) 16550 compatible (FIFO 16 byte) 115Kbps max No1 x 10/100Mbps (RJ45) Intel 82551QM2 x USB 2.0 (rear, TYPe-A, host port, protected), 1 x USB 2.0 (front, TYPe-A, host port, protected) Up to480Mbit/s (high speed)1 x Type II (external access) 1 x Type II (internal access)1 x ATA/66 Master/Slave (dedicated for CF Slots)2 x MiniPCI type III

AA Lithium (3.6V) Yes 5 yearsYes Power

AT, Integrated on board, auto ranging 9÷36 VDC 10W – 13W basic configuration (without add-on)

Panel mount Steel, nickel treatmentIP65 Aluminum alloy

0° ÷ +50°C -20° ÷ +60°C80% (non-condensing)


Conforms to UL-60950-1 – Information technology equipment - Safety 2090306-e315863By ASeM headquarters 12 months 18 / 24 / 36 months (optional)

8,4” Color LCD TFT 800 x 600 (SVGA) 256K 0,213 x 0,213mm LeD 400cs/m2 370:1 60°:60°/45°:55° 70.000h5 wires – analog - resistive 80% ±2% 35mln activations < 1 % Serial No

Cutout (w x H) 176 x 149 213 x 179 292 x 239

12,1” Color LCD TFT 800 x 600 (SVGA) 256K 0,307 x 0,307mm LeD 500cd/m2 800:1 80°:80°/80°:60° 100.000h5 wires – analog - resistive 80% ±2% 35mln activations < 1 % Serial Optional

weight (Kg) 1,6 2,2 3,2

System characteristics

29

Dimensions (w x H x D) 201 x 168 x 68 240 x 202 x 73 321 x 262 x 73

OT600OT600 is an entry-level, cost-effective fanless

Panel PC family featuring a 500 MHz AMD

GeODe LX800 processor.

The all-in-one motherboard integrates two

USB 2.0 ports with rear access, one USB 2.0

port on front panel, one 10/100/1000 Mbps

ethernet, one RS232 serial interface, one

RS232/422/485 serial interface, one external-

access Compact Flash slot, 2 Mini PCI slots

for industrial fieldbus boards and up to 1 GB

SODIMM DDR memory module.

The OT600 family is available with 16 million

colors TFT LeD Backlight LCDs with 6,5”,

8,4”, 12,1” in 4:3 aspect ratio, 5 wires resistive

touchscreens, and aluminium front panels.

Figure 1: 2 Compact Flash slots

Figure 2: Plant supervision with Premium HMI

Figure 3: 2 MiniPCI slots

ALUMINIUM FRONT PANeL wITH USB MODULe

FIeLDBUSeS FOR INDUSTRIAL COMMUNICATION (OPTIONAL)

IP65 PROTeCTION RATING

6,5” 8,4” 12,1” LX800Alu

24VDC12VDC XP ProweSCe6MiniPCI

1GB512MBRes 5Res 4

PANeL PC

30

ATOM

24VDC w7 ProXP ProCe6 weSMiniPCI

InoxAlu19”12,1”x 15” 17” GFGRes 5 2GB1GB512MB

Fanless





12,1” Color LCD TFT 800 x 600 (SVGA) 16M 0,307 x 0,307mm LeD 500cd/m2 800:1 80°:80°/80°:60° 100.000h5 wires – analog - resistive 80% ±2% 35mln activations < 1 % Serial OptionalAll-in-one, ASeM MB991/B Voltages and temperature monitor Time programmableIntel® ATOM z510P 1.1GHz 400MHz 512KB L2 Intel® US15wPGMA500 integrated in Intel® US15wP Shared – 1MB, 4MB, 8MB system selectableDDR2 PC5300 512 MB, 1 GB, 2 GB 1 x SODIMM module1 x RS232 (DB9M) 16550 compatible (FIFO 16 byte) 115Kbps max No1 x RS-232/422/485 (DB15M) 16550 compatible (FIFO 16 byte) 115Kbps max No / Yes2 x 10/100/1000Mbps (RJ45) Intel 82574L2 x USB 2.0 (rear, TYPe-A, host port), 1 x USB 2.0 (front, TYPe-A, host port, protected), optional 3 x USB 2.0 (rear, TYPe-A, host port)Up to 480Mbit/s (high speed)1 x Type II (external access), 1 x Type I (internal access optional)1 x SATA12 x MiniPCICoin (CR2032 3V) Yes 5 yearsSystem / watch-dog Power

AT, Integrated on board, auto ranging 18÷36 VDC 23W@12,1”; 25W@15,0”; 27W@17,0” (ATOM 1.6GHz T/S 1GB RAM)

Panel mount Steel, zinc galvanizationOT1100 IP65 Aluminum alloy frame with polycarbonate foil PANTONe 429C

0° ÷ +50°C also with 24x7 HDD, 0° ÷ +45°C with 17” or 19”, +5° ÷ +45°C with standard HDD -20° ÷ +60°C

80% (non-condensing)

Conforms to eN 55022 Information technology equipment – Radio disturbance characteristics Conforms to eN 61000-3-2 – Limits for harmonic current emissions Conforms to EN 61000-3-3 – Limits of voltage fluctuation and flicker Conforms to eN 55024 Information technology equipment – Immunity characteristics Conforms to eN 60950-1 – Information technology equipment – SafetyBy ASeM headquarters 12 months 18 / 24 / 36 months (optional)


Notes

Display

Touchscreen Optional

Motherboard

CPU

Graphic

System memory

Serial interfaces

Optional (note 2)

ethernet interfaces

USB interfaces

Compact Flash slotsMass storage interfacesexpansion slotsBattery


Power supply

Case

Front panel (note 1)

Measurements mm

Temperature

Humidity

Ce

warranty

12

Size Type Resolution Colors Pixel pitch Backlight Luminance Contrast Viewing angle Lifetime (min.)Technology Light transimission Lifetime Linearity deviation Interface Glass film GlassModel Hw monitor watch-dogProcessor FSB Cache ChipsetController MemoryType Size SocketType UART Transfer rate OptoisolationType UART Transfer rate OptoisolationType ControllerType

Transfer rate

TypeParallelTypeType Removable LifetimeReset buttons LeDs


Type MaterialType Protection Construction Color

12,1” 15” 17”19”

Operation Storage

Operation/Storage

emission

Immunity Safety


31

Cutout (w x H) 315 x 250 370 x 295 435 x 335470 x 368

weight (Kg) 4,2 5,0 6,37,0

Aluminium (w x H x D) 335 x 270 x 54 390 x 315 x 54 455 x 355 x 58490 x 388 x 68

Stainless Steel (w x H x D) 335 x 270 x 54 398 x 315 x 54 455 x 355 x 58490 x 388 x 68

Intel® ATOM z530P 1.6GHz 533MHz 512KB L2 Intel® US15wP

OT1100-TFXIP66K Stainless Steel True Flat with polyester foilRAL 7035

17,0” Color LCD TFT 1280 x 1024 (SXGA) 16M 0,264 x 0,264mm LeD 350cd/m2 1000:1 85°:85°/80°:60° 50.000h

15,0” Color LCD TFT 1024 x 768 (XGA) 16M 0,297 x 0,297mm LeD 400cd/m2 600:1 80°:80°/80°:80° 50.000h

19” Color LCD TFT 1280 x 1024 (SXGA) 16M 0,294 x 0,294mm LeD 350cd/m2 1000:1 85°:85°/80°:60° 50.000h

with stainless steel front panel, touchscreen is mandatory and have no USB port on the frontRS-232/422/485 standard and optoisolated can be installed one alternative to the other

FeATUReS | PLUS

FRONT PANeL IN TwO DIFFeReNT VeRSIONS


IP65 OR IP66K (STAINLeSS STeeL) PROTeCTION RATING.

12,1” Color LCD TFT 1024 x 768 (XGA) 16M 0,240 x 0,240mm LeD 600cd/m2 700:1 80°:80°/70°:70° 50.000h

12,1”

OT1100The OT1100 fanless Panel PC family features

1 GHz z510P and 1,6 GHz z530P Intel ATOM

processors.

The all-in-one motherboard features two USB

2.0 ports with rear access, one USB 2.0 port on

front panel, two 10/100/1000 Mbps ethernet,

one RS232 serial interface, one RS232/422/485

serial interface, one external-access Compact

Flash slot, 2 Mini PCI slots for industrial fieldbus

boards and up to 2 GB SODIMM DDR2 memory

module.

The OT110 family is available with 16 million

colors TFT LeD Backlight LCDs with 12,1” and

15” in 4:3 aspect ratio, with 17” and 19” in 5:4

aspect ratio, 5 wires resistive touchscreens,

polyester finish aluminium front panel, and

stainless steel True Flat front panels.

Figure 1: extremely thin

Figure 2: Industrial fieldbus on MiniAPCI slot

Figure 3: Intel® Atom™ Technology


See p.22

33

PANeL PC

32

FanlessSystem characteristicsDisplay Size 8.4” 10,4” 12.1” 12.1” 15” 17” 19”

Type Color LCD TFT Color LCD TFT Color LCD TFT Color LCD TFT Color LCD TFT Color LCD TFT Color LCD TFTResolution 800x600 (SVGA) 800 x 600 (SVGA) 800x600 (SVGA) 1024x768 (XGA) 1024x768 (XGA) 1280 x 1024 (SXGA) 1280 x 1024 (SXGA)Colors 16M 16M 16M 16M 16M 16M 16MPixel pitch 0,213x0,213mm 0,264 x 0,264mm 0,307 x 0,307mm 0,240x0,240mm 0,297 x 0,297mm 0,264 x 0,264mm 0,294 x 0,294mmBacklight LeD LeD LeD LeD LeD LeD LeDLuminance 450cd/m2 400cd/m2 500cd/m2 600cd/m2 450cd/m2 350cd/m2 350cd/m2

Contrast 600:1 700:1 800:1 700:1 600:1 1000:1 1000:1Viewing angle L:R/U:L 80°:80°/80°:60° 80°:80°/60°:80° 80°: 80°/80°: 60° 80°:80°/70°:70° 80°:80°/80°:80° 85°:85°/80°:80° 85°:85°/80°:80°Lifetime 50.000h 50.000h 100.000h 50.000h 40.000h 50.000h 50.000h

Touchscreen Technology 5 wires – analog - resistiveOptional Light transimission 80% ±2%

Lifetime 35mln activationsLinearity deviation < 1 %Interface SerialGlass Film Glass Optional for 12”, 15” and 17”

Motherboard Model All-in-one, ASeM MB951/B Hw monitor Voltages and temperatures monitor watch-dog Time programmable

CPU Processor Intel® Celeron M 600MHz Intel® Celeron M 1GHz (373)FSB 400MHz 400MHz Cache 512KB L2 512KB L2Socket Socket 478 uFC-BGA Socket 478 uFC-BGAChipset Intel® 915GMe + ICH6M Intel® 915GMe + ICH6M

Graphic Controller GMA900 integrated in Intel® 915GMeMemory Shared - 64MB÷128MB system selectable

System memory Type DDR2 PC5300Size 512 MB, 1 GB, 2 GBSocket 1 x SODIMM module

Video interfaces Type 1 x VGA (DB15F)

Serial interfaces Type 1 x RS232 (DB9M)UART 16550 compatible (FIFO 16 byte)Transfer rate 115kbps maxOptoisolation No

Optional Type 1 x RS-232/422/485 (DB15M)(note 1) UART 16550 compatible (FIFO 16 byte)

Transfer rate 115Kbps maxOptoisolation No / Yes

Parallel interfaces Type 1 x SPP, ePP, eCP bidirectionalOptional (note 3) Connection DB25M

PS/2 interfaces Type 1 x PS/2 Keyboard / Mouse

ethernet interfaces Type 2 x 10/100/1000Mbps (RJ45)Controller Intel 82574L

USB interfaces Type 4 x USB 2.0 (rear, TYPe-A, host port, protected), 1 x USB 2.0 (front, TYPe-A, host port, protected),1 x USB 2.0 (internal, pin strip,host port, protected)

Transfer rate Up to 480Mbit/s (high speed)

Compact Flash slots Type 1 x Type I (internal access), 1 x Type II (external access)

Mass storage interfaces Serial 1 x SATA 1 1,5Gb/sParallel 1 x ATA/100 Master/Slave (dedicated for CF Slots)

expansion slots Type 1 x PC/104 Plus or 1 x PCI half size

Battery Type AA Lithium (3.6V)Removable YesLifetime 20 years

Buttons, leds and keys Reset buttons YesLeDs Front: Power / Rear: power, HDD, system fail, watch-dogFunction keys 4 programmable on front panel (optional), only for aluminum version excluded 19”

electrical characteristicsPower supply Type AT, Integrated on board, auto ranging

Input voltage 18÷36 VDCPower consumption 39w @ OT1200 15” Celeron M 600MHz, T/S, 512MB RAM, CF 512MB, No add-onUPS Optional


Material Steel, nickel treatment

Front panel Type OT1200 OT1200-TFXProtection IP65 IP66K

(note 2) Construction Aluminum alloy with polycarbonate foil Stainless Steel True Flat with polyester foilColor PANTONe 429C RAL 7035

Measurements Aluminium (w x H x D) Stainless Steel (w x H x D) Cutout (w x H) weight (Kg) mm 8,4” 250 x 210 x 87/103 - 230 x 190 3,1(note 3) 10,4” 300 x 245 x 87/103 - 280 x 225 4,0

12,1” 335 x 270 x 87/103 335 x 270 x 87/103 315 x 250 4,615” 390 x 315 x 87/103 398 x 315 x 87/103 370 x 295 5,317” 455 x 355 x 91/103 455 x 355 x 91/103 435 x 335 6,719” 490 x 388 x 97/113 490 x 388 x 97/113 470 x 368 7,3

environmental characteristicsTemperature Operation 0° ÷ +50°C also with 24x7 HDD, 0° ÷ +45°C with 17” or 19”, +5° ÷ +45°C with standard HDD

Storage +45°C with HDD

Humidity Operation/Storage 80% (non-condensing)warranty & ApprovalsCe emission Conforms to eN 55022 Information technology equipment – Radio disturbance characteristics



UL MarksSafety Conforms to UL-60950-1 – Information technology equipment - Safety Certificate N° 2090306-e315863


Notes1 RS-232/422/485 standard and optoisolated can be installed one alternative to the other2 with stainless steel front panel, touchscreen is mandatory and have no USB port on the front3 SL (SLIM) version is 86.5mm depth – parallel interface not available

OT1200The OT1200 fanless Panel PC family is equipped

with 600 MHz and 1GHz Intel Celeron Ultra Low

Voltage processors.

The all-in-one motherboard integrates four USB

2.0 ports with rear access, one USB 2.0 on the

front panel, two 10/100/1000 Mbps ethernet,

one RS232 serial interface, one external-access

Compact Flash slot, one additional standard

VGA video output and up to 2 GB SODIMM DDR2

memory module.

The OT1200 family is available with 8,4”, 10,4”

SVGA and XGA and 15" in 4:3 aspect ratio, 7” and

19” in 5:4 aspect ratio 16 million colors TFT LeD

Backlight LCDs, 5 wires resistive touchscreens,

aluminium with polyester finish

surface front panels and stainless

steel True Flat front panels for 17”

and 19” versions.


See p.23

FeATUReS | PLUS

STANDARD CUT-OUT FOR PANeL PCs AND MONITORS

PCI SLOTS FOR eXPANSION BOARDS


INTeGRATeD UPS (OPTIONAL)

UL 60950-1 ReCOGNIzeD COMPONeNT CeRTIFICATION


Figure 1: Stainless steel True Flat Front Panel

Figure 2: Communication ports and UPS

Figure 3: Slot PCI

CelM

InoxAlu

UPS24VDC

XP ProweSCe6

PCIPC/104Plus

19”17”15”10,4” 12,1” 12,1”x8,4” GFGRes 5

2GB1GB512MB

24VDCMiniPCIP-CAPGFGRes 5

PANeL PC

Fanless

34

HT-TFMProjective capacitive - 4 fingers - antiglare90% ± 3%100mln activation< 1%USB-

HT700-TFIP66Alluminium True Flat with polyester foilPANTONe Cool Gray 4CYes, with OCA (Optical Clear Adhesive)

HT700-TFMIP66KGlassBlackYes, with OCA (Optical Clear Adhesive)

HT700-TFXIP66KStainless steel True Flat with polyester foilRAL 7035Yes, with OCA (Optical Clear Adhesive)

NEW ASEMSTANDARDS

INOXAlu-TFMAlu TF

18,5”w15,6”w15”12,1”10,4”

2GBATOM-e6xx 1GB

6,5” 7”w 8,4”

weSweC7

Alu

HT700The new HT700 entry-level, cost-effective fanless

Panel PC family is equipped with 1 GHz e640 and

1,6 GHz e680 Intel Tunnel Creek processors.

The all-in-one motherboard integrates two rear-

access USB 2.0, one USB 2.0 on the IP66 front

panel, two 10/100/1000 Mbps ethernet with

“Jumbo Frame” and “Wake on Lan” support, one

RS232 serial interface, one rear-access Compact

Flash slot and 1GB and 2GB on-board memory

configurations with 800 MHz DDR2 chip.

HT700 family is compliant with the New ASeM

STANDARDS and it is available with 8,4”, 10,4”,

12,1” SVGA and XGA and 15”, 15,6” in 4:3

aspect ratio and 18,5” in 16:9 wide 16 million

colors TFT LeD Backlight LCDs. The front panels

are in aluminium and aluminium True Flat with 5

wires resistive touchscreens. wide versions are

available with glass True Flat front panels with

retro-projected capacitive Multitouch.

System characteristicsDisplay Size 6.5” 7” 8.4” 10.4” 12.1” 12.1” 15.0” 15.6” 18.5”

Type Color LCD TFT Color LCD TFT Color LCD TFT Color LCD TFT Color LCD TFT Color LCD TFT Color LCD TFT Color LCD TFT Color LCD TFTResolution 640x480 (VGA) 800x480 (wVGA) 800x600 (SVGA) 800x600 (SVGA) 800x600 (SVGA) 1024x768 (SXGA) 1024x768 (XGA) 1366x768 (wXGA) 1366x768 (wXGA)Colors 16.2M 16.2M 16.2M 16.2M 16.2M 16.2M 16.2M 16.7M 16.7MPixel pitch 0,207x0,207mm 0,1905x0,1905mm 0,213x0,213mm 0,264x0,264mm 0,3075x0,3075mm 0,3075 x 0,3075mm 0,297x0,297mm 0,252x0,252mm 0,300x0,300mmBacklight LeD LeD LeD LeD LeD LeD LeD LeD LeDLuminance 800cd/m2 400cd/m2 450cd/m2 400cd/m2 500cd/m2 600cd/m2 450cd/m2 300cd/m2 300cd/m2

Contrast 600:1 1000:1 600:1 700:1 800:1 700:1 700:1 500:1 1000:1Viewing angle L:R/U:L 80°:80°/ 70°:70° 80°:80°/ 80°:80° 80°: 80°/80°: 60° 80°: 80°/60°: 80° 80°: 80°/80°: 60° 80°: 80°/70°: 70° 80°: 80°/70°: 70° 85°: 85°/80°: 80° 170° H, 160° vLifetime (min.) 50.000h 50.000h 50.000h 50.000h 100.000h 50.000h 100.000h 50.000h 50.000h

Touchscreen Type HT, HT-TF, HT-TFXOptional Technology 5 wires – analog - resistive

Light transimission 80% ±2%Lifetime 35mln activationsLinearity deviation < 1 %Interface SerialGlass Film Glass Optional

Motherboard Model All-in-one, ASeM MB931Hw monitor Temperature monitorwatch-dog Time programmable

CPU Processor Intel® Atom™ e640 1.00GHz Intel® Atom™ e680 1.6GHzCache 512KB L2 512KB L2Platform controller Intel® eG20T Intel® eG20THUB

Graphic Controller Integrated in microprocessor, 320MHz Integrated in microprocessor, 400MHzMemory DVMT max 512MB DVMT max 512MB

System memory Type DDR2 800Size 1 GB, 2 GBSocket memory down



Transfer rate 187.5kbps maxOptoisolation optional

ethernet interfaces Type 2 x 10/100/1000Mbps (RJ45)Controller 1 PHY: Realtek RTL8211e + MAC: Integrated into Intel eG20TController 2 Intel 82574LJumbo frames/WOL Yes/Yes

USB interfaces Type 2 x USB 2.0 (rear, TYPe-A, host port, protected), 1 x USB 2.0 (front, TYPe-A, host port, protected) Transfer rate Up to 480Mbit/s (high speed)

Compact Flash slots Type 1 x Type I (external access)

Mass storage interfaces Type 1 x SATA II, 3Gb/s

expansion slots Type 2 x MiniPCI

Battery Type Lithium ½AA size (3.6V)Removable YesLifetime 2.5 years

Buttons, leds Reset buttons System / watch-dogand keys LeDs Power / Storage / watch-dog / System error

electrical characteristicsPower supply Type AT, Integrated on board

Input voltage 18÷32 VDCPower consumption MAX 48w @ 24VUPS Optional with batteries kit for rear system or detached mouting (wall), 227 x 41.8 x 73.5 mm (w x H x D)



Front panel Type HT700Protection IP66

(note 1) Construction Full aluminum alloyColor -Touchscreen Optional

Measurements (w x H x D) (w x H x D) TFM (w x H x D) Cutout (w x H) weight (Kg)mm 6,5” 200 x 175 x 69,4 200 x 175 x 69,4 - 192 x 167 TBD

7” 215 x 167 x 69,4 215 x 167 x 69,4 - 207 x 1598,4” 250 x 210 x 66,6 250 x 210 x 66,6 - 230 x 19010,4” 300 x 245 x 66.6 300 x 245 x 66,6 433 x 281 x 76/102 280 x 22512,1” 335 x 270 x 66,6 335 x 270 x 66,6 - 315 x 25015” 390 x 315 x 66,6 390 x 315 x 66,6 503 x 321 x 76/102 370 x 29515,6” 430 x 275 x 66,6 430 x 275 x 66,6 - 410 x 25518,5” 500 x 320 x 68,6 500 x 320 x 68,6 582 x 368 x 76/102 480 x 300

environmental characteristicsTemperature Operation 0° ÷ +50°C without HDD, 5° ÷ +45°C with HDD



warranty & ApprovalsUL Marks

Safety Conforms to UL-508 (1 UL - Standard for Industrial Control equipment)Certificate N° 20130926-e356364

Ce emission Conforms to eN 55022 Information technology equipment – Radio disturbance characteristicsConforms to eN 61000-3-2 – Limits for harmonic current emissionsConforms to EN 61000-3-3 – Limits of voltage fluctuation and flicker



Notes1 with True Flat front panel, touchscreen is mandatory. Stainless Steel front panel have no USB port on the front2 RS-232/422/485 standard and optoisolated can be installed one alternative to the other

Figure 1: Optional UPS

Figure 2: CF Slot

Figure 3: embedded design

HMI700HT700+Premium HMI

See p.21

New ASeM STANDARDS COMPLIANT: • STANDARD CUT-OUT FOR PANEL PCs AND MONITORS • FRONT PANEL IN FOUR DIFFERENT vERSIONS • GALvANICALLy ISOLATED POWER SUPPLy • FIELDBUS FOR INDUSTRIAL COMMUNICATION (OPTIONAL) • INTEGRATED UPS (OPTIONAL)


IP66 OR IP66K (STAINLeSS STeeL AND P-CAP MULTITOUCH) PROTeCTION RATING

HT700-TFX (w x H x D)----335 x 270 x 66.6398 x 315 x 66.6--

FeATUReS | PLUS

PANeL PC

36

UPS24VDC

XP ProweSweC7 w7 Pro

PCIePCIMiniPCI

4GB2GB1GB

Fanless

21,5”w19”18,5”w17”15,6”w15”12,1”X10,4” 12,1”

System characteristicsDisplay Size 10.4” 12.1” 12.1” 15.0” 15.6” 17” 18.5” 19” 21.5”

Type Color LCD TFT Color LCD TFT Color LCD TFT Color LCD TFT Color LCD TFT Color LCD TFT Color LCD TFT Color LCD TFT Color LCD TFTResolution 800x600 (SVGA) 800x600 (SVGA) 1024x768 (SXGA) 1024x768 (XGA) 1366x768 (wXGA) 1280x768 (SXGA) 1366x768 (wXGA) 1280x768 (SXGA) 1920x1080 (FHD)Colors 16.2M 16.2M 16.2M 16.2M 16.7M 16.7M 16.7M 16.7M 16.7MPixel pitch 0,264x0,264mm 0,3075x0,3075mm 0,3075 x 0,3075mm 0,297x0,297mm 0,252x0,252mm 0,264x0,264mm 0,300x0,300mm 0,294x0,294mm 0,248x0,248mmBacklight LeD LeD LeD LeD LeD LeD LeD LeD LeDLuminance 400cd/m2 500cd/m2 600cd/m2 450cd/m2 300cd/m2 300cd/m2 300cd/m2 350cd/m2 300cd/m2

Contrast 700:1 800:1 700:1 700:1 500:1 1000:1 1000:1 1000:1 5000:1Viewing angle L:R/U:L 80°: 80°/60°: 80° 80°: 80°/80°: 60° 80°: 80°/70°: 70° 80°: 80°/70°: 70° 85°: 85°/80°: 80° 85°:85° / 80°:80° 170° / 160° 85°: 85°/80°: 80° 178° / 178°Lifetime (min.) 50.000h 100.000h 50.000h 100.000h 50.000h 50.000h 50.000h 50.000h 50.000h

Touchscreen Type HTOptional Technology 5 wires – analog - resistive

Light transimission 80% ±2%Lifetime 35mln activationsLinearity deviation < 1 %Interface SerialGlass Film Glass


CPU Processor Intel® Atom™ dual core D2550 1,86GHzCache 512KB L2Platform controller Intel® NM10HUB

Graphic Controller Integrated in microprocessor, 640MHzMemory

System memory Type DDR3 800/1066Size 1 GB, 2 GB, 4 GBSocket 1 x SODIMM




ethernet interfaces Type 2 x 10/100/1000Mbps (RJ45)Controller 2 x Intel 82574LJumbo frames/WOL Yes/Yes

USB interfaces Type 4 x USB 2.0 (rear, TYPe-A, host port, protected), 1 x USB 2.0 (front, TYPe-A, host port, protected), 1 x USB 2.0 (rear, TYPe-A, host port, protected optional with serial multistandard interface)Transfer rate Up to 480Mbit/s (high speed)

Video output Type 1 x VGA or 1 x DVI-I

Compact Flash slots Type

Mass storage interfaces Type 1 x SATA II, 3Gb/s

expansion slots Type

Battery Type Lithium CR20032 (3V)Removable YesLifetime 5 years


electrical characteristicsPower supply Type AT isolated

Input voltagePower consumption Max 60w @ 24VUPS Optional with batteries kit for rear system or detached mouting (wall), 227 x 41.8 x 73.5 mm (w x H x D)



Front panel Type HT2000Protection IP66

(note 1) Construction Aluminum alloyColor -Touchscreen Optional

Measurements HT2000 S0/S1 (w x H x D) HT2000-TF S0/S1 (w x H x D) Cutout (w x H) weight (Kg)mm 10.4” 300 x 245 x 76/102 280 x 225 TBD

12,1” 335 x 270 x 76/102 315 x 25015” 390 x 315 x 76/102 370 x 29515.6” 430 x 275 x 76/102 410 x 25517” 455 x 355 x 78/104 435 x 33518.5” 500 x 320 x 78/104 480 x 30019” 490 x 388 x 78/104 470 x 36821.5” 579 x 367 x 80/106 559 x 347

environmental characteristicsTemperature Operation








Notes1 with True Flat front panel, touchscreen is mandatory. Stainless Steel front panel have no USB port on the front2 RS-232/422/485 standard and optoisolated can be installed one alternative to the other

Optional for 12.1”, 15” and 17”

Dynamic Video Memory Technology, memory dimension is selected by operating system, max 512MB

1 x Type I (external access, bootable), 1 x Type I optional (external access not bootable)

18÷36 VDC (18÷32 VDC with UPS)

HT2000-TFIP66Aluminum True Flat with polyester foilPANTONe Cool Gray 4CYes, with OCA (Optical Clear Adhesive)

0° ÷ +50°C also with 24x7 HDD, +5° ÷ +45°C with standard HDD

300 x 245 x 76/102335 x 270 x 76/102390 x 315 x 76/102430 x 275 x 76/102455 x 355 x 78/104500 x 320 x 78/104490 x 388 x 78/104579 x 367 x 80/106

HT2000-TFM S0/S1 (w x H x D)---433 x 281 x 76/102-503 x 321 x 76/102582 x 368 x 76/102-

New ASeM STANDARDS COMPLIANT: • STANDARD CUT-OUT FOR PANEL PCs AND MONITORS • FRONT PANEL IN FOUR DIFFERENT vERSIONS • GALvANICALLy ISOLATED POWER SUPPLy • FIELDBUS FOR INDUSTRIAL COMMUNICATION (OPTIONAL) • INTEGRATED UPS (OPTIONAL)



Projective capacitive - 4 fingers - antiglare90% ± 3%100mln activation< 1%USB-

HT2000-TFXIP66KStainless steel True Flat with polyester foilRAL 7035Yes, with OCA (Optical Clear Adhesive)

HT2000-TFMIP66KGlassBlackYes, with OCA (Optical Clear Adhesive)

HT2000-TFX S0/S1 (w x H x D)-335 x 270 x 76/102398 x 315 x 76/102-455 x 355 x 78/104-490 x 388 x 78/104-

S0: 2 x MiniPCI on board

S1: 2 x MiniPCI on board, 1 x PCI/PCIe x1 for max 3w half size card

HT2000The new fanless HT2000 Panel PC family offers an excellent price/performance ratio and is equipped with the Intel Cedar Trail platform with 1,86GHz Dual Core D2550 third generation ATOM processor.The all-in-one motherboard integrates four rear-access USB 2.0, one USB 2.0 on the IP66 front panel, two 10/100/1000 Mbps Ethernet with “Jumbo Frame” and “wake on Lan” support, one RS232 serial interface, one rear-access CFast SATA II slot and up to 4 GB DD3 SODIMM 1066 Mhz memory modules.HT2000 family is compliant with the New ASeM STANDARDS and it is available with 10,4”, 12,1” - SVGA and XGA - 15” in 4:3 aspect ration, 17” and 19” in 5:4 aspect ratio, 15,6”, 18,5” and 21,5” in

NEW ASEMSTANDARDS

ATOM-D2550

16:9 wide 16 million colors TFT LeD Backlight LCDs. The front panels are in aluminium and aluminium True Flat with 5 wires resistive touchscreens. wide versions are available with glass True Flat front panels with retro-projected capacitive Multitouch.

Figure 1: extremely thin


Figure 3: Motherboard 953

P-CAPGFGRes 5

INOXAlu-TFMAlu TFAlu

FeATUReS | PLUS

PANeL PC

38

Fanless

38

HT3000

UPS24VDC

XP ProweSw7 Pro

PCIePCIMiniPCI

16GB8GB4GB2GB

21,5”w19”18,5”w17”15,6”w15”12,1”X12,1”

NEW ASEMSTANDARDS

i7i5i3CeL

System characteristicsDisplay Size 12.1” 12.1” 15.0” 15.6” 17” 18.5” 19” 21.5”

Type Color LCD TFT Color LCD TFT Color LCD TFT Color LCD TFT Color LCD TFT Color LCD TFT Color LCD TFT Color LCD TFTResolution 800x600 (SVGA) 1024x768 (SXGA) 1024x768 (XGA) 1366x768 (wXGA) 1280x768 (SXGA) 1366x768 (wXGA) 1280x768 (SXGA) 1920x1080 (FHD)Colors 16.2M 16.2M 16.2M 16.7M 16.7M 16.7M 16.7M 16.7MPixel pitch 0,3075x0,3075mm 0,240 x 0,240mm 0,297x0,297mm 0,252x0,252mm 0,264x0,264mm 0,300x0,300mm 0,294x0,294mm 0,248x0,248mmBacklight LeD LeD LeD LeD LeD LeD LeD LeDLuminance 500cd/m2 600cd/m2 450cd/m2 300cd/m2 350cd/m2 300cd/m2 350cd/m2 300cd/m2

Contrast 800:1 700:1 700:1 500:1 1000:1 1000:1 1000:1 5000:1Viewing angle L:R/U:L 80°: 80°/80°: 60° 80°: 80°/70°: 70° 80°: 80°/70°: 70° 85°: 85°/80°: 80° 85°:85° / 80°:80° 170° / 160° 85°: 85°/80°: 80° 178° / 178°Lifetime (min.) 100.000h 50.000h 100.000h 50.000h 50.000h 50.000h 50.000h 50.000h


Lifetime 35mln activationsLinearity deviation < 1 %Interface SerialGlass Film Glass Optional for 12.1”, 15” and 17”


CPU Processor Intel® Celeron 1047Ue1.4GHz2 / 22MB Smart Cache17w / 64bit / 22nmIntel® HM76

FrequencyCore / Threads

CacheTDP / IS / TechnologyPlatform controller HUB

Graphic Controller Intel® HD Graphics, 650MHz integrated in microprocessor Celeron™Intel® HD Graphics 4000, 650MHz integrated in microprocessor Core™

Memory Dynamic Video Memory Technology, memory dimension is selected by operating system, max 512MB

System memory Type DDR3 800/1066Size 2 GB, 4 GB, 8 GB, 16 GBSocket 2 x SODIMM




PS/2 interfaces Type 1 x PS/2 Keyboard/Mouse

ethernet interfaces Type 3 x 10/100/1000Mbps (RJ45)Controller 2 x Intel 82574L; 1 x Intel 82579Jumbo frames/WOL Yes/Yes

USB interfaces Type 2 x USB 3.0 (rear, TYPe-A, host port, protected), 2 x USB 2.0 (rear, TYPe-A, host port, protected), 1 x USB 2.0 (front, TYPe-A, host port, protected), 1 x USB 2.0 (rear, TYPe-A, host port, protected optional with serial multistandard interface)

Transfer rate USB 3.0 up to 5Gbit/s (super speed), UBS 2.0 up to 480Mbit/s (high speed)


Compact Flash slots Type 1 x Type I (external access, bootable) with SATA II interface

Mass storage interfaces Type 1 x SATA III, 6Gbps, 1 x mSATA III, 6Gbps

expansion slots Type S0: 2 x MiniPCI on board

S1: 2 x MiniPCI on board, 1 x PCI or 1 x PCIe x4 for max 3w half size cardBattery Type Lithium CR20032 (3V)

Removable YesLifetime 5 years


electrical characteristicsPower supply Type AT, Isolated

Input voltage 18÷36 VDC (18÷32 VDC with UPS)Power consumption TBDUPS Optional with batteries kit for rear system or detached mounting, 227 x 41.8 x 73.5 mm (w x H x D)



Front panel Type HT3000 HT3000-TF HT3000-TFM(note 1) Protection IP66 / NeMA 4 IP66 / NeMA 4 IP66K

Construction Aluminum alloy Aluminum True Flat with polyester foil GlassColor - PANTONe Cool Gray 4C BlackTouchscreen Optional Yes, with OCA (Optical Clear Adhesive) Yes, with OCA (Optical Clear Adhesive)

Measurements HT3000 S0/S1 (wxHxD) Cutout (wxH) weight (Kg)mm 12,1” 335 x 270 x 76/119 315 x 250 TBD

15” 390 x 315 x 76/119 370 x 29515.6” 430 x 275 x 76/119 410 x 25517” 455 x 355 x 78/121 435 x 33518.5” 500 x 320 x 78/121 480 x 30019” 490 x 388 x 78/121 470 x 36821.5” 579 x 367 x 80/123 559 x 347

environmental characteristicsTemperature Operation 0° ÷ +50°C also with HDD 24x7, 5° ÷ +45°C with standard HDD



warranty & ApprovalsUL Marks warranty Management By ASeM headquarters

Standard 12 monthsextended 18 / 24 / 36 months (optional)

Safety Conforms to UL-508 (1 UL - Standard for Industrial Control equipment)Certificate N° Pending

Ce emission Conforms to eN 55022 Information technology equipment – Radio disturbance characteristics NotesConforms to eN 61000-3-2 – Limits for harmonic current emissions 1 with True Flat front panel, touchscreen is mandatory.

Stainless Steel front panel have no USB port on the front2 RS-232/422/485 standard and optoisolated can be installed one alternative to the other

Conforms to EN 61000-3-3 – Limits of voltage fluctuation and flickerImmunity Conforms to eN 55024 Information technology equipment – Immunity characteristicsSafety Conforms to eN 60950-1 – Information technology equipment – Safety

Intel® Celeron™ 1020e2.2GHz2 / 22MB Smart cache35w / 64bit/ 22nmIntel® HM76

Intel® Core™ i3 3120Me2.4GHz2 / 43MB Smart cache35w / 64bit/ 22nmIntel® HM76



New ASeM STANDARDS COMPLIANT: • STANDARD CUT-OUT FOR PANEL PCs AND MONITOR S • FRONT PANEL IN FOUR DIFFERENT vERSIONS • GALvANICALLy ISOLATED POWER SUPPLy • FIELDBUS FOR INDUSTRIAL COMMUNICATION (OPTIONAL) • INTEGRATED UPS (OPTIONAL)

UL 508 LISTeD COMPONeNT CeRTIFICATION (PeNDING)


HT3000-TFM S0/S1 (wxHxD)--433 x 281 x 89/119-503 x 321 x 91/121-582 x 368 x 93/123


HT3000-TFX S0/S1 (wxHxD)335 x 270 x 89/119398 x 315 x 89/119-455 x 355 x 91/121-490 x 388 x 91/121-

HT3000-TFXIP66KStainless Steel True Flat with polyester foilRAL 7035Yes, with OCA (Optical Clear Adhesive)

HT3000-TF S0/S1 (wxHxD)335 x 270 x 76/119390 x 315 x 76/119430 x 275 x 76/119455 x 355 x 78/121500 x 320 x 78/121490 x 388 x 78/121579 x 367 x 80/123

The new fanless HT3000 Panel PC family is equipped with the Intel Ivy Bridge platform and 17 or 35 watt third generation Core i7, Core i5, Core i3 and Celeron Dual Core processors based on the 22 nm manufacturing process. To date, HT3000 Panel PCs reach the highest performance with a Fanless system.

The all-in-one motherboard integrates two USB 3.0 and two rear access USB 2.0, one USB 2.0 on the IP66 front panel, three 10/100/1000 Mbps ethernet with “Jumbo Frame” and “Wake on Lan” support, one RS232 serial interface, one rear-access CFast SATA II slot, an additional standard VGA or DVI-I output, one connector for the installation of a 2,5" SATA III HDD or SSD and up to 16 GB of RAM memory with two 1600 Mhz DD3 SODIMM modules

HT3000 family is compliant with the New ASeM STANDARDS and it is available with 16 million colors TFT LeD Backlight LCDs with 12,1” (SVGA e XGA) and 15” in 4:3 aspect ratio, with 17” and 19” in 5:4 aspect ratio, with 15,6”, 18,5”, 21,5” in wide 16:9 aspect ratio. The front panels are in aluminium and aluminium True Flat with 5 wires resistive touch-screen. wide versions are available with glass True Flat front panels with retro-projected capacitive Multitouch.To meet different price/performance needs, HT3000 Panel PCs are available with 5 different processors..

Figure 1: Aluminium P-CAP Multitouch front panel

Figure 2: Close up network

Figure 3: Motherboard 1151


P-CAPGFGRes 5

FeATUReS | PLUS

PANeL PC

40

Performance

41

STANDARD CUT-OUT FOR PANeL PCs AND MONITORS

PCI SLOT FOR eXPANSION BOARDS





System characteristicsDisplay Size 8.4” 10,4” 12.1” 12.1” 15” 17” 19”

Type Color LCD TFT Color LCD TFT Color LCD TFT Color LCD TFT Color LCD TFT Color LCD TFT Color LCD TFTResolution 800x600 (SVGA) 800 x 600 (SVGA) 800x600 (SVGA) 1024x768 (XGA) 1024x768 (XGA) 1280 x 1024 (SXGA) 1280 x 1024 (SXGA)Colors 16M 16M 16M 16M 16M 16M 16MPixel pitch 0,213x0,213mm 0,264 x 0,264mm 0,307 x 0,307mm 0,240x0,240mm 0,297 x 0,297mm 0,264 x 0,264mm 0,294 x 0,294mmBacklight LeD LeD LeD LeD LeD LeD LeDLuminance 450cd/m2 400cd/m2 500cd/m2 600cd/m2 450cd/m2 350cd/m2 350cd/m2

Contrast 600:1 700:1 800:1 700:1 600:1 1000:1 1000:1Viewing angle L:R/U:L 80°:80°/80°:60° 80°:80°/60°:80° 80°: 80°/80°: 60° 80°:80°/70°:70° 80°:80°/80°:80° 85°:85°/80°:80° 85°:85°/80°:80°Lifetime 50.000h 50.000h 100.000h 50.000h 40.000h 50.000h 50.000h


Lifetime 35mln activationsLinearity deviation < 1 %Interface SerialGlass Film Glass Optional for 12”, 15” and 17”

Motherboard Model All-in-one, ASeM MB951/B Hw monitor Voltages and temperatures monitor watch-dog Time programmable

CPU Processor Intel® Celeron M 600MHz Intel® Celeron M 1GHz (373)FSB 400MHz 400MHz Cache 512KB L2 512KB L2Socket Socket 478 uFC-BGA Socket 478 uFC-BGAChipset Intel® 915GMe + ICH6M Intel® 915GMe + ICH6M

Graphic Controller GMA900 integrated in Intel® 915GMeMemory Shared - 64MB÷128MB system selectable

System memory Type DDR2 PC5300Size 512 MB, 1 GB, 2 GBSocket 1 x SODIMM module

Video interfaces Type 1 x VGA (DB15F)



Transfer rate 115Kbps maxOptoisolation No / Yes

Parallel interfaces Type 1 x SPP, ePP, eCP bidirectionalOptional (note 3) Connection DB25M

PS/2 interfaces Type 1 x PS/2 Keyboard / Mouse

ethernet interfaces Type 2 x 10/100/1000Mbps (RJ45)Controller Intel 82574L

USB interfaces Type 4 x USB 2.0 (rear, TYPe-A, host port, protected), 1 x USB 2.0 (front, TYPe-A, host port, protected),1 x USB 2.0 (internal, pin strip,host port, protected)


Compact Flash slots Type 1 x Type I (internal access), 1 x Type II (external access)

Mass storage interfaces Serial 1 x SATA 1 1,5Gb/sParallel 1 x ATA/100 Master/Slave (dedicated for CF Slots)

expansion slots Type 1 x PC/104 Plus or 1 x PCI half size

Battery Type AA Lithium (3.6V)Removable YesLifetime 20 years

Buttons, leds and keys Reset buttons YesLeDs Front: Power / Rear: power, HDD, system fail, watch-dogFunction keys 4 programmable on front panel (optional), only for aluminum version excluded 19”

electrical characteristicsPower supply Type AT, Integrated on board, auto ranging

Input voltage 18÷36 VDCPower consumption 39w @ OT1300 15” Celeron M 600MHz, T/S, 512MB RAM, CF 512MB, No add-onUPS Optional


Material Steel, nickel treatment

Front panel Type OT1300 OT1300-TFXProtection IP65 IP66K

(note 2) Construction Aluminum alloy with polycarbonate foil Stainless Steel True Flat with polyester foilColor PANTONe 429C RAL 7035

Measurements Aluminium (w x H x D) Stainless Steel (w x H x D) Cutout (w x H) weight (Kg) mm 8,4” 250 x 210 x 87/103 - 230 x 190 3,1(note 3) 10,4” 300 x 245 x 87/103 - 280 x 225 4,0

12,1” 335 x 270 x 87/103 335 x 270 x 87/103 315 x 250 4,615” 390 x 315 x 87/103 398 x 315 x 87/103 370 x 295 5,317” 455 x 355 x 91/103 455 x 355 x 91/103 435 x 335 6,719” 490 x 388 x 97/113 490 x 388 x 97/113 470 x 368 7,3

environmental characteristicsTemperature Operation 0° ÷ +50°C also with 24x7 HDD, 0° ÷ +45°C with 17” or 19”, +5° ÷ +45°C with standard HDD

Storage +45°C with HDD


warranty & ApprovalsCe emission Conforms to eN 55022 Information technology equipment – Radio disturbance characteristics



UL MarksSafety Conforms to UL-60950-1 – Information technology equipment - Safety Certificate N° 2090306-e315863


Notes1 RS-232/422/485 standard and optoisolated can be installed one alternative to the other2 with stainless steel front panel, touchscreen is mandatory and have no USB port on the front3 SL (SLIM) version is 86.5mm depth – parallel interface not available

OT1300The OT1300 Panel PC family is equipped with

1,5 GHz Intel Celeron and 1,73 and 2 GHz Intel

Pentium M processors

The all-in-one motherboard integrates four rear

access USB 2.0, one USB 2.0 port on the front

panel, two 10/100/1000 Mbps ethernet, one

RS232 serial interface, one external-access

Compact Flash slot , one additional standard

VGA video output and up to 2 GB SODIMM

DDR2 memory module.

The OT1300 family is available with 8,4”, 10,4”,

12,1” - SVGA and XGA - 15” in 4:3 aspect ratio

and 17”,19” 5:4 aspect ratio 16 million colors

TFT LeD Backlight LCDs, 5 wires resistive

touchscreens, aluminium with polyester finish

surface front panels and stainless steel True

Flat front panels for 12,1”, 15”, 17” and 19”

versions.


Figure 2: Slot PCI

Figure 3: Intel Celeron M and Pentium M up to 2GHz micropro-

cessors

FeATUReS | PLUS

PMCelM

24VDC

InoxAlu

PCIPC/104Plus

XP ProweSCe5 Ce6

GFGRes 5

2GB1GB512MB

19”17”15”10,4” 12,1” 12,1”x8,4”

PANeL PC

42

FeATUReS | PLUS

Performance


Notes

System characteristicsDisplay

Touchscreen

Motherboard

CPU

Raid

Graphic

System memory

Video interfaces

Serial interfaces

Optional (note 1)

Parallel interfaces Optional

PS/2 interfaces

ethernet interfaces

USB interfaces

Compact Flash slots

Mass storage interfaces

Optical device interfaces

expansion slots

Battery


Power supply

Case

Front panel (note 2)

Keyboard module Te version

Measurements mm

Temperature

Humidity

Ce

UL

warranty

12



Size Type Resolution Colors Pixel pitch Backlight Luminance Contrast Viewing angle L:R/U:L Lifetime (min.)

Technology Light transimission Lifetime Linearity deviation Interface Glass Film Glass

Model Hw monitor watch-dog

Processor

FSB Cache Socket Chipset

Controller Raid mode

Controller Memory

Type Size Socket

Type

Type UART Transfer rate Optoisolation


Type Connection

Type

Type Controller

Type Transfer rate

Type

Serial Parallel

Type

Type alternativeType Removable Lifetime

Reset button LeDs

TypeInput voltage

Power consumption

Type Material


Type Layout Function keys

H1(H2) 12,1” 15” 17” 19”

H3 12,1” 15” 17” 19”

H4 12,1” 15” 17” 19”

Operation Storage

Operation/Storage

emission

Immunity Safety

Marks Safety Certificate N° Management Standard extended

RS-232/422/485 standard and optoisolated and parallel port can be installed one alternative to the otherswith stainless steel front panel, touchscreen is mandatory and have no USB port on the front

12,1” Color LCD TFT 800 x 600 (SVGA) 16.2M 0,307 x 0,307mm LeD 500cd/m2 800:1 80°: 80°/80°: 60° 100.000h

5 wires – analog - resistive 80% ±2% 35mln activations < 1 % Serial Optional

All-in-one, ASeM MB1021/GA Voltages and temperatures monitor Time programmable

Intel® Core 2 DuoT6400 2GHz 800MHz 2MB L2 Socket P Intel® 965GMe + ICH8eM

Integrated only for H2, H3 and H4 versions 0,1

GMA X3100 integrated in Intel® 965GMe Shared – up to 256MB system selectable

DDR2 PC5300 1 GB, 2 GB, 4GB 2 x SODIMM module

1 x VGA (DB15F - max resolution 2048x1536QXGA 60Hz) , 1 x DVI-D (single link – max resolution 1600x1200 UXGA)

2 x RS232 (DB9M) 16550 compatible (FIFO 16 byte) 115Kbps max No

1 x RS-232/422/485 (DB15M) 16550 compatible (FIFO 16 byte) 115Kbps max No / Yes

1 x SPP, ePP, eCP bidirectional DB25M

1 x PS/2 Keyboard, 1 x PS/2 Mouse

2 x 10/100/1000Mbps (RJ45) Intel 82566MM, Intel 82574L

4 x USB 2.0 (rear, TYPe-A, host port, protected), 2 x USB 2.0 (front, TYPe-A, host port, protected), 2 x USB 2.0 (internal pin strip, host port, protected) Up to 480Mbit/s (high speed)

1 x Type II (external access)

3 x SATA 2 3Gb/s 1 x ATA/100 Master/Slave (dedicated for CF Slot)

AA Lithium (3.6V) Yes 20 years

Yes Power, HDD activity, LAN, Alarm fans/temperature

Auto ranging 110÷230VAC 140w 18÷36 VDC 140w (optional) 65w @ FT650 H1, 15”, T/S, Core 2 Duo 2,4GHz, 1GB RAM, CF

Panel mount Steel, nickel treatment

IP65 Aluminum with polycarbonate foil PANTONe 429C

Membrane, alphanumeric US-International F1-F12, directions and control keys

0° ÷ +50°C also with 24x7 HDD, +5° ÷ +45°C with standard HDD -20° ÷ +60°C



Conforms to UL-60950-1 – Information technology equipment - Safety 20120524-e315863 By ASeM headquarters 12 months 18 / 24 / 36 months (optional)

15” Color LCD TFT 1024 x 768 (XGA) 16M 0,297 x 0,297mm LeD 450cd/m2 700:1 80°: 80°/70°: 70° 100.000h

12.1” XGA Color LCD TFT 1024 x 768 (XGA) 16.2M 0,240x0,240mm LeD 600cd/m2 700:1 80°: 80°/70°: 70° 50.000h

17” Color LCD TFT 1280 x 1024 (SXGA) 16.7M 0,264 x 0,264mm LeD 350cd/m2 1000:1 85°: 85°/80°: 80° 50.000h

19” Color LCD TFT 1280 x 768 (SXGA) 16.7M 0,294 x 0,294mm LeD 350cd/m2 1000:1 85°: 85°/80°: 80° 50.000h

H3 / H4 / H1-Te / H2-Te / H3-Te / H4-Te 1 x DVD-Rw

H1 / H2 -

H1 / H1-Te / H2 / H2-Te - -

H3 / H3-Te 2 x PCI half size 1 x PCI, 1 x PCI-e x4 half size on riser card

H4 / H4-Te 3 x PCI, 1 x PCI-e x4 half size on riser card

IP66KStainless Steel True Flat with polyester foilRAL 7035

FT650 355 x 270 x 81 (99) 425 x 305 x 81 (99) 455 x 355 x 81 (99)

490 x 388 x 91 (109)355 x 270 x 137 425 x 305 x 137 455 x 355 x 137 490 x 388 x 147355 x 270 x 175 425 x 305 x 175 455 x 355 x 175 490 x 388 x 185

FT650-Te 360 x 400 x 81 (99) 425 x 440 x 81 (99) 455 x 485 x 81 (99)

-360 x 400 x 137 425 x 440 x 137 455 x 485 x 137

-360 x 400 x 175 425 x 440 x 175 455 x 485 x 175

-

FT650 335 x 250 405 x 285 435 x 335 470 x 368

335 x 250 405 x 285 435 x 335 470 x 368

335 x 250 405 x 285 435 x 335 470 x 368

FT650-Te 335 x 380 405 x 420 435 x 465

-

335 x 380 405 x 420 435 x 465

-

335 x 380 405 x 420 435 x 465

-

FT650 6,0 7,9 8,9 9,9

7,6 9,5

10,5 11,5

8,8 10,7 11,5 12,5

FT650-Te 9,0

11,0 13,0

-

10,5 12,0 14,0

-

11,7 13,2 15,2

-

Dimensions (w x H x D) Cutout (w x H) weight (Kg)FT650-TFX

- 455 x 355 x 81 490 x 388 x 91

- -

455 x 355 x 137 490 x 388 x 147

- -

455 x 355 x 175 490 x 388 x 185

Intel® Core 2 DuoT9300 2,5GHz800MHz6MB L2Socket PIntel® 965GMe + ICH8eM

Intel® Core 2 DuoT9500 2,6GHz800MHz6MB L2Socket PIntel® 965GMe + ICH8eM

Intel® Core 2 DuoT6600 2,2GHz 800MHz 2MB L2 Socket P Intel® 965GMe + ICH8eM


Type FT650 / FT650-Te FT650-TFX

FT650 Panel PC family is equipped with 2GHz and 2,6

GHz Intel Core 2 Duo processors with cache from 2 MB

to 6 MB.

The all-in-one motherboard integrates four rear-

access USB 2.0, one USB 2.0 port on the front panel,

two 10/100/1000 Mbps ethernet, one RS232 serial

interface, one rear-access Compact Flash slot, RAID

0,1 functionality, one expansion connector for industrial

fieldbus boards, one additional standard vGA o DvI-D

video output and up to 4 GB of RAM memory with two

DDR2 SODIMM modules.

The motherboard also features a connector for the

installation of a backplane with different configuration of

PCI and PCI express expansion slots.

The FT650 family is available with 12,1” - SVGA and

XGA - 15” in 4:3 aspect ratio and 17”, 19” in 5:4 aspect

ratio 16 million colors TFT LeD Backlight LCDs, 5 wires

resistive touchscreens, aluminium with polyester finish

surface front panels and stainless steel True Flat front

panels for 17” and 19” versions.

The front panel of FT650-Te integrates an alphanumeric

membrane keyboard with 12 function keys.

FT650FT650-Te

RAID 0,1 CONTROLLeR ON-BOARDFRONT PANeL wITH eXTeNDeD KeYBOARD (FT650-Te)FIeLDBUSeS FOR INDUSTRIAL COMMUNICATION (OPTIONAL)UL 60950-1 ReCOGNIzeD COMPONeNT CeRTIFICATIONIP65 OR IP66K (STAINLeSS STeeL) PROTeCTION RATING.

Figure 1: Version without the keyboard

Figure 2: 4 PCI/PCIe slots in the H4 version

Figure 3: Intel® Core 2 Duo

microprocessors and 965GMe chipset

220VAC24VDCPCIePCI

InoxAlu

w7 ProXP ProweS

GFGRes 5

4GB2GB1GB

19”12,1” 15” 17”

C2DCel

PANeL PC

Performance

45

16GB

44

HT5000

UPS220VAC24VDC

XP ProweSw7 Pro

PCIePCIMiniPCI

8GB4GB2GB

21,5”w19”18,5”w17”15,6”w15”12,1”X12,1”

NEW ASEMSTANDARDS

i7i5i3CeL

Intel® Core™ i3 3120Me2,4GHz2 / 43MB Smart cache35w / 64bit/ 22nmIntel® QM77



Intel® Core™ i7 3610Qe2,3GHz4 / 86MB Smart cache45w / 64bit/ 22nmIntel® QM77

New ASeM STANDARDS COMPLIANT: • STANDARD CUT-OUT FOR PANEL PCs AND MONITOR • FRONT PANEL IN FOUR DIFFERENT vERSIONS • GALvANICALLy ISOLATED POWER SUPPLy • FIELDBUS FOR INDUSTRIAL COMMUNICATION (OPTIONAL) • INTEGRATED UPS (OPTIONAL)


IP66 OR IP66K PROTeCTION RATING

HT5000-TFM (wxHxD)--433 x 281 x TBD-503 x 321 x TBD-582 x 368 x TBD


HT5000-TFX (wxHxD)335 x 270 x TBD398 x 315 x TBD-455 x 355 x TBD-490 x 388 x TBD-

HT5000-TFXIP66KStainless Steel True Flat with polyester foilRAL 7035Yes, with OCA (Optical Clear Adhesive)

HT5000-TF (wxHxD)335 x 270 x TBD390 x 315 x TBD430 x 275 x TBD455 x 355 x TBD500 x 320 x TBD490 x 388 x TBD579 x 367 x TBD

The new HT5000 Panel PC family is equipped with the Intel Ivy Bridge platform and 17 or 35 watt third generation Core i7, Core i5, Core i3 and Celeron Dual Core processors, based on the 22 nm manufacturing process.

The all-in-one motherboard integrates two USB 3.0 and two USB 2.0 with rear access, one USB 2.0 on the IP66 front panel, three 10/100/1000 Mbps ethernet with “Jumbo Frame” and “Wake on Lan” support, RAID 0,1 support, one connector for the on-board installation of a mSATA III SSD, one RS232 serial interface, one rear-access CFast SATA II slot, an additional standard VGA or DVI-I output and up to 16 GB of RAM memory with two 1600 Mhz DDR3 SODIMM modules.

In S3 and S4 versions, the motherboard also integrates a connector for the installation of a backplane with different configuration of PCI and PCI Express expansion slots. HT5000 family is compliant with the New ASeM STANDARDS and it is available with 12,1” - SVGA and XGA - 15” in 4:3 aspect ratio, 17” and 19” in 5:4 aspect ratio, 15,6”, 18,5” and 21,5” in 16:9 wide 16 million colors TFT LeD Backlight LCDs. The front panels are in aluminium and aluminium True Flat with 5 wires resistive touchscreens. wide versions are available with glass True Flat front panels with retro-projected capacitive Multitouch.HT5000 Panel PCs are available with 220-110 VAC or 24 VDC input voltage.

Figure 1: Aluminium front panel

Figure 2: Close up RAM

Figure 3: Close up Network


System characteristicsDisplay Size 12.1” 12.1” 15.0” 15.6” 17” 18.5” 19” 21.5”

Type Color LCD TFT Color LCD TFT Color LCD TFT Color LCD TFT Color LCD TFT Color LCD TFT Color LCD TFT Color LCD TFTResolution 800x600 (SVGA) 1024x768 (SXGA) 1024x768 (XGA) 1366x768 (wXGA) 1280x768 (SXGA) 1366x768 (wXGA) 1280x1024 (SXGA) 1920x1080 (FHD)Colors 16.2M 16.2M 16.2M 16.7M 16.7M 16.7M 16.7M 16.7MPixel pitch 0,3075x0,3075mm 0,240 x 0,240mm 0,297x0,297mm 0,252x0,252mm 0,264x0,264mm 0,300x0,300mm 0,294x0,294mm 0,248x0,248mmBacklight LeD LeD LeD LeD LeD LeD LeD LeDLuminance 500cd/m2 600cd/m2 450cd/m2 300cd/m2 350cd/m2 300cd/m2 350cd/m2 300cd/m2

Contrast 800:1 700:1 700:1 500:1 1000:1 1000:1 1000:1 5000:1Viewing angle L:R/U:L 80°: 80°/80°: 60° 80°: 80°/70°: 70° 80°: 80°/70°: 70° 85°: 85°/80°: 80° 85°:85° / 80°:80° 170° / 160° 85°: 85°/80°: 80° 178° / 178°Lifetime (min.) 100.000h 50.000h 100.000h 50.000h 50.000h 50.000h 50.000h 50.000h


Lifetime 35mln activationsLinearity deviation < 1 %Interface SerialGlass Film Glass Optional for 12.1”, 15” and 17”


CPU Processor Intel® Celeron 1020e2,2GHz2 / 22MB Smart Cache35w / 64bit / 22nmIntel® QM77



Raid Controller Integrated in platform controller HUBRaid mode 0,1









USB interfaces Type 2 x USB 3.0 (rear, TYPe-A, host port, protected), 2 x USB 2.0 (rear, TYPe-A, host port, protected), 1 x USB 2.0 (front, TYPe-A, host port, protected), 1 x USB 2.0 (rear, TYPe-A, host port, protected optional with serial multistandard interface)






S1: 2 x MiniPCI on board, 1 x PCI or 1 x PCIe x4S3: 2 x MiniPCI on board, 2 x PCI, 1 x PCIe x4 or 1 x PCI, 2 x PCIe x1




Input voltage 18÷36 VDC or 110÷230 VAC autorangingPower consumption TBDUPS Optional with 24VDC power supply, 12V batteries kit for rear system or detached mounting, 227 x 41.8 x 73.5 mm (w x H x D)



Front panel Type HT5000 HT5000-TF HT5000-TFM(note 1) Protection IP66 / NeMA 4 IP66 / NeMA 4 IP66K

Construction Aluminum alloy Aluminum True Flat with polyester foil GlassColor - PANTONe Cool Gray 4C BlackTouchscreen Optional Yes, with OCA (Optical Clear Adhesive) Yes, with OCA (Optical Clear Adhesive)

Measurements HT5000 S0/S1 (wxHxD) Cutout (wxH) weight (Kg)mm 12,1” 335 x 270 x TBD 315 x 250 TBD

15” 390 x 315 x TBD 370 x 29515.6” 430 x 275 x TBD 410 x 25517” 455 x 355 x TBD 435 x 33518.5” 500 x 320 x TBD 480 x 30019” 490 x 388 x TBD 470 x 36821.5” 579 x 367 x TBD 559 x 347




warranty & ApprovalsUL Marks warranty Management By ASeM headquarters

Standard 12 monthsextended 18 / 24 / 36 months (optional)


Ce emission Conforms to eN 55022 Information technology equipment – Radio disturbance characteristics NotesConforms to eN 61000-3-2 – Limits for harmonic current emissions 1 with True Flat front panel, touchscreen is mandatory.

Stainless Steel front panel have no USB port on the front2 RS-232/422/485 standard and optoisolated can be installed one alternative to the other

Conforms to EN 61000-3-3 – Limits of voltage fluctuation and flickerImmunity Conforms to eN 55024 Information technology equipment – Immunity characteristicsSafety Conforms to eN 60950-1 – Information technology equipment – Safety

P-CAPGFGRes 5

FeATUReS | PLUS

PANeL PC INDUSTRIAL AUTOMATION

46

47

Asem realizes the best true flat front panel

through a special manufacturing process

which takes place in a clean room to avoid

environmental contamination such as dust or

airborne microbes. The process consists in

gluing a thin polyester film on the touchscreen

and then fix the two components within the

front panel.

Figure 1: Panel detail

Figure 2: Integrated power-on Led

Standard technologyGFG technology

Aluminum True Flat Front Panel Projected Capacitive Multitouch Front Panel

Spaces dots Glass substrate (0,2 mm)

Conductive coating (ITO)

Glass substrateFFC or FPC tail

Stainless Steel True Flat Front Panel

All new IPC and monitor families are available

with the new generation ASeM Multitouch

front panels in 15.6”, 18.5” and 21.5” screen

sizes with 16:9 aspect ratio.

Projected Capacitive Touchscreen Technology

allows new operating concepts such as zoom,

swipe or rotate gestures (even with gloves)

which are now being increasingly adopted

in the factory automation. New P-CAP front

panels are made of a robust aluminium frame

and a tempered glass surface in a completely

true-flat design that gives maximum resistance

to environmental influences and facilitates

cleaning.

Spaces dots PeT hard-coated Film

Conductive coating (ITO)

Glass substrateFFC or FPC tail

Touchscreen Glass-Film-Glass Technology

The option Glass-Film-Glass (GFG) for 12”,

15” and 17” touchscreen is available for

most of the ASeM IPCs and monitors.

In GFG touchscreen, there is an additional

thin glass (0,2 mm) on the touch surface that

provides greater resistance to scratches

and products cleaning.

Panel PCs with Stainless Steel True Flat

front panels do not have a USB on the

front, which makes them particularly used in

pharmaceutical and food & beverage industry.

48 49

Box PCs Fanless

Box PC Performance

Box PC systems based on Atom, Celeron ULV and Core i3, i5, i7 processors, for wall or DIN rail mounting.

Box PC systems based on Pentium M, Core 2 Duo, Core i3, i5, i7 processors, for wall or DIN rail mounting, that ensure high computing power and high level graphics.

50

BOX PC

FeATUReS | PLUS

FanlessSystem characteristicsMotherboard

CPU

Graphic

System memory

Video interfaces

Serial interfaces

ethernet interfaces

USB interfaces

Compact Flash slots


expansion slots

Battery


Power supply

Case

Measurements mm

Temperature

Humidity

Ce

UL

warranty






Processor Cache Socket

Controller Memory

Type Size Socket

Type



Type Controller

Type Transfer rate

Type

OptionalParallel

Type

Type Removable Lifetime

Reset buttons LeDs


Type Material

Operation Storage

Operation/Storage


Marks Safety Certificate N°


All-in-one, ASeM MB831-V Temperature monitor Time programmable

AMD LX800 500MHz 128KB L2 Soldered on board

Integrated on board Shared - 2MB÷128MB system selectable

DDR PC2700 512 MB, 1 GB 1 x SODIMM module

1 x VGA (DB15F)


1 x RS-232/422/485 (DB15M) / compatible MPI 187Kbit/s (Siemens S7-300/S7-400) 16550 compatible (FIFO 16 byte) 115Kbps max No

1 x 10/100Mbps (RJ45) Intel 82551QM

3 x USB 2.0 (rear, TYPe-A, host port) Up to 480Mbps (high speed)

1 x Type II (external access),

1 x Type II (internal access)

1 x ATA/66 Master/Slave

2 x MiniPCI type III/


System / watch-dog Power

AT, integrated on board, auto ranging9÷36 VDC 6W basic configuration (without add-on)

wall and DIN rail mount Steel, zinc galvanization

0° ÷ +50°C -20° ÷ +60°C



Conforms to UL-60950-1 – Information technology equipment - Safety 2090306-e315863


Dimensions (w x H x D) 221 x 163,1 x 61,1

weight (Kg) 1,3

51

SMARTBOXSmartbox is an entry-level, cost-

effective fanless box PC family

equipped with a 500 MHz AMD GeODe

LX800 processor.

The all-in-one motherboard integrates

three USB 2.0, one 10/100/1000 Mbps

ethernet, one RS232 serial interface,

one RS232/422/485 serial interface,

one external-access Compact Flash

slot, a standard VGA video output, 2

Mini PCI slots for industrial fieldbus

boards and up to 1 GB SODIMM DDR

memory module.

Figure 1: Communication boards for industrial fieldbus

Figure2: Slot for Compact Flash



wALL MOUNT OR DIN RAIL INSTALLATION

LX800 MiniPCI 24VDC12VDC XP ProweSCe61GB512MBwALLDIN RAIL

52

BOX PC


CPU (note1)

Graphic

Video interfaces

System memory

Serial interfaces

Optional note 2

ethernet interfaces

USB interfaces

Optional note 1

Compact Flash slots


expansion slots

Battery


Power supply

Case

Measurements mm

Temperature

Humidity

Ce

warranty

1

2






Processor FSB Cache Chipset

Controller Memory

Type alternativeType Size Socket



Type ControllerFeatures

Type Transfer rate

TypeTransfer rate

Type

Parallel

Serial

Type

Type RemovableLifetimeReset buttons LeDsSwitches


Type Material Top enclosure

Operation Storage

Operation/Storage



B-One 300 wMe available only with CPU ATOM z530P 1.6GHz

RS-232/422/485 and optional 2 x USB ports have to be ordered together

All-in-one, ASeM MB972 Temperature monitor Time programmable


GMA500 integrated in Intel® US15wP Shared – 1MB, 4MB, 8MB system selectable

1 x VGA (max resolution) 1 x DVI-I (single link – max resolution 1600x1200 UXGA)

DDR2 PC5300 512 MB, 1 GB, 2 GB 1 x SODIMM module

1 x RS232 (DB9M) 16550 compatible (FIFO 16 byte) 115Kbps max DC

1 x RS-232/422/485 (DB15M) 16550 compatible (FIFO 16 byte) 115Kbps max No

2 x 10/100/1000Mbps (RJ45) Intel 82574LJumbo Frames and magic packet (Wake on LAN support)

2 x USB 2.0 (rear, TYPe-A, host port)Up to 480Mbps (high speed)

1 x Type I (external access)

1 x ATA/66 Master/Slave1 x SATA 2 3Gbps Master/Slave

Coin (CR2032 3V) Yes 2 years

System reset / watch-dog Power, HDD, system fail, watch-dogPower-on (only on B-one D version)

0° ÷ +50°C, 0° ÷ +45°C with 24x7 HDD, +5° ÷ +45°C with standard HDD -20° ÷ +60°C





Dimensions (w x H x D) 215 x 148 x 62

weight (Kg) 1.8

53

B-one 300 D4 x USB 2.0 (rear, TYPe-A, host port, 2 on the front) Up to 480Mbps (high speed)

B-one 300 D / B-one 300 wM-

B-one 300 wMe2 x MiniPCI

B-one 300 w / B-one 300 wMe2 x USB 2.0 (rear, TYPe-A, host port)Up to 480Mbps (high speed)

B-one 300 DATX with push buttorn, integrated on board, auto ranging220 VAC with external power supply30w @ ATOM 1.1GHz 1GB RAM, 1GB CF, No USB, no add-on

B-one 300 w / B-one 300 wMeAT, iIntegrated on board, auto ranging18÷36 VDC35w @ B-One 300 wMe ATOM 1.6GHz 512MB RAM

B-one 300 DDesktopAluminiumextruded aluminium black anodization

B-one 300 w / B-one 300 wePanel or DIN rail mountSteel, paintedextruded aluminium black anodization

Notes

FeATUReS | PLUS

FIeLDBUSeS FOR INDUSTRIAL COMMUNICATION (B-ONe 300-wMe)

DeSKTOP (B-ONe 300-D), wALL MOUNT OR DIN RAIL (B-ONe 300-wM) INSTALLATION

Figure 1: wall mount version (B-ONe 300 wM)

Figure 2: Rear connectors

Figure 3: Intel® Atom z5XXP Microprocessors

B-ONe 300-DB-ONe 300-wMThe fanless B-ONe300 Box PC family

is equipped with 1 GHz z510P and 1,6

GHz z530P Intel ATOM processors.


two USB 2.0, two 10/100/1000 Mbps


one RS232/422/485 serial interface, one

internal-access Compact Flash slot, a

standard VGA or DVI-I output and up to

2 GB SODIMM DDR2 memory module.

24VDC220VACATOM MiniPCI w7weSCe6DIN RAILwALLDeSK 2GB1GB512MB

54

BOX PC


CPU (note 1)

Graphic

Video interfaces

System memory

Serial interfaces

Optional

ethernet interfaces

USB interfaces

Compact Flash slots


expansion slots

Battery


Power supply

Case

Measurements mm

Temperature

Humidity

Ce

warranty

1







Controller Memory

Type

Type Size Socket



Type Controllerwake-on-Lan

Type Transfer rate

Type

Serial

Type


Reset buttons LeDs


Type Material Top enclosure

Operation Storage

Operation/Storage



PB300-e version is available only with ATOM z530P 1.6GHz




1 x VGA (DB15F - max resolution 1280x1024 SXGA) , optional 1 x DVI-I (single link – max resolution 1600x1200 UXGA)



1 x RS-232/422/485 (DB15M) 16550 compatible (FIFO 16 byte) 115Kbps max No

2 x 10/100/1000Mbps (RJ45) Intel 82574LYes

2 x USB 2.0 (rear, TYPe-A, host port), optional 2 x USB 2.0 (rear, TYPe-A, host port) Up to 480Mbps (high speed)

1 x Type I (external access)

1 x SATA II 3Gb/s Master/Slave

2 x MiniPCI


System reset / watch-dog Power, HDD, watchdog, System error

AT, integrated on board, auto ranging 18÷32 VDC 6.7w @ PB300 ATOM 1.1GHz 1GB RAM 1GB CF, no add-on, no USB 25w fully loaded

Panel mount and optional kit for DIN rail mount Steel, zinc galvanization with holes. Completely closed as optional






Aluminium (w x H x D) 220 x 150 x 50

weight (Kg) 1,9

55

Notes

FeATUReS | PLUS



The fanless PB300 Box PC family is

equipped with 1 GHz z510P and 1,6

GHz z530P Intel ATOM processors.


two USB 2.0, two 10/100/1000 Mbps



slot two Mini PCI slots for industrial

communication boards, one standard

VGA or DVI-I video output and up to 2

GB SODIMM DDR2 memory module.

PB300

Figure 1: Completely closed mechanic


Figure 3: Intel® Atom Processors

ATOM MiniPCI 24VDC w7weSCe62GB1GB512MBwALLDIN RAIL

56

BOX PC

FeATUReS | PLUS


CPU

Graphic

Video interfaces

System memory

Serial interfaces

Optional (note 1)

Parallel interfaces Optional (note2)

PS/2 interfaces

ethernet interfaces

USB interfaces

Compact Flash slots


expansion slots

Battery


Power supply

Case

Measurements mm (note 2)

Temperature

Humidity

Ce

UL

warranty

1

2


Processor FSB CacheSocket Chipset

Controller Memory

Type

Type Size Socket



Type Connection

Type

Type Controller

Type Transfer rate

Type

Parallel Serial

Type


Reset buttons LeDs

Type Input voltage Power consumptionUPS

Type Material

Operation Storage

Operation/Storage




RS-232/422/485 standard and optoisolated can be installed one alternative to the other

SL (SLIM) version is 73.2mm depth – parallel interface not available

All-in-one, ASeM MB951/B Voltages and temperatures monitor Time programmable

Intel® Celeron M 600MHz 400MHz 512KB L2 Socket 478 uFC-BGA Intel® 915GMe + ICH6M

GMA900 integrated in Intel® 915GMe Shared - 64MB÷128MB system selectable

1 x VGA (DB15F - max resolution 2048x1536 QXGA)

DDR2 PC5300512 MB, 1 GB, 2 GB 1 x SODIMM module




1 x PS/2 Keyboard / Mouse

2 x 10/100/1000Mbps (RJ45) Intel 82574L

4 x USB 2.0 (rear, TYPe-A, host port, protected),1 x USB 2.0 (internal, pin strip, host port, protected) Up to 480Mbit/s (high speed)

1 x Type I (internal access), 1 x Type II (external access)

1 x SATA 1 1,5Gb/s 1 x ATA/100 Master/Slave (dedicated for CF Slots)

1 x PC/104 Plus or 1 x PCI half size


System / watch-dog Power, HDD, system fail, watch-dog

AT, integrated on board, auto ranging 18÷36 VDC 19w @ PB1200 Celeron M 600MHz 512MB RAM Optional

wall and DIN rail mount Steel, nickel treatment






Intel® Celeron M 1GHz (373) 400MHz 512KB L2 Socket 478 uFC-BGA Intel® 915GMe + ICH6M


weight (Kg) 2,0

57





Notes

PB1200The fanless PB1200 Panel PC family

is equipped with 600 MHz and

1GHz Intel Celeron Ultra Low Voltage

processors.


four USB 2.0, two 10/100/1000 Mbps



slot, one standard VGA video output

and up to 2 GB SODIMM DDR2

memory module






Figure 1: Optional UPS module

Figure 2: Communication cards for industrial fieldbus

Figure 3: PCI slot

CelM PCIPC/104Plus UPS24VDC XP ProweSCe5 Ce62GB1GB512MBwALLDIN RAIL

58

BOX PC


CPU

Graphic

System memory

Serial interfaces

Optional (note 1)

ethernet interfaces

USB interfaces

Video Output

Compact Flash slots


expansion slots

Battery


Power supply

Case

Measurements mm

Temperature

Humidity

Ce

UL

warranty

1





Notes


Processor Cache Platform HUB

Controller Memory

Type Size Socket



Type Controller

Type Transfer rate

Type

Type

OptionalType

Type


Reset buttons LeDs

Type Input voltage Power consumption UPS

Type Material

PB2000 / S0PB2000 / S1

Operation Storage

Operation/Storage






Intel® Atom™ dual core D2550 1,86 GHz 512KB L2 Intel® NM10

Integrated in microprocessor, 640MHz Dynamic Video Memory Technology, memory dimension is selected by operating system, max 512MB

DDR3 500/1066 1 GB, 2 GB, 4 GB 1 x SODIMM module


1 x RS-232/422/485 (DB15M) 16550 compatible (FIFO 16 byte) 187.5Kbps max optional

2 x 10/100/1000Mbps (RJ45) 2 x Intel 82574L) Yes/Yes

4 x USB 2.0 (TYPe-A, host port), 1 x USB 2.0 (TYPe-A, host port, protected optional with serial multistandard interface) Up to 480Mbps (high speed)

1 x VGA or 1 x DVI-I

1 x Type I (external access, bootable),

1 x Type I (external access not bootable)

1 x SATA II, 3Gb/s

S0: 2 x MiniPCI on board

S1: 2 x MiniPCI on board, 1 x PCI/PCIe x 1 for max 3w half size card

Lithium CR2032 (3V) Yes 5 years

System / watch-dog Power / Stronger / watch-dog / System-error

AT, isolated18÷36 VDC (18÷32 VDC with UPS) TBD Optional with batteries kit for rear system or detached mounting, 227 x 41.8 x 73.5 mm (w x H x D)

wall and DIN rail mount Steel, zinc galvanization

0° ÷ +50°C also with HDD 24x7, 5° ÷ +45°C with standard HDD -10° ÷ +60°C



Conforms to UL-508 (1 UL – Standard for Industrial Control equipment) 20130926-e356364


Dimensions (w x H x D) 304 x 215 x 63 304 x 215 x 89

weight (Kg) TBD

59

New ASeM STANDARDS COMPLIANT: • GALvANICALLy ISOLATED POWER SUPPLy • FIELDBUS FOR INDUSTRIAL COMMUNICATION (OPTIONAL) • INTEGRATED UPS (OPTIONAL)



FeATUReS | PLUS

NEW ASEMSTANDARDS

PB2000The new fanless PB2000 Panel PC

family offers an excellent price/

performance ratio and is equipped

with the Intel Cedar Trail platform

with 1,86GHz Dual Core D2550 third

generation ATOM processor.


four USB 2.0, two 10/100/1000 Mbps

Ethernet with “Jumbo Frame” and

“wake on Lan” support, one RS232

serial interface, a standard VGA or

DVI-I video output, one external-

access CFast SATA II slot and up to 4

GB DD3 SODIMM 1066 Mhz memory

modules.

Figure 1: PCI/PCIe Slot


Figure 3: 1 PCI slot

XP ProweSw7 Pro4GB2 GB1GBATOM-D2550 UPS24VDC PCIePCIMiniPCI

60

BOX PC

Fanless

61

16GB8GB4GB2GBi7i5i3CeL

System characteristicsMotherboard Model All-in-one, ASeM MB1151

Hw monitor Temperature monitorwatch-dog Time programmable

CPU Processor Intel® Celeron 1047Ue1.4GHz2 / 22MB Smart Cache17w / 64bit / 22nmIntel® HM76











USB interfaces Type 2 x USB 3.0 (TYPe-A, host port, protected), 2 x USB 2.0 (TYPe-A, host port, protected), 1 x USB 2.0 (TYPe-A, host port, protected), 1 x USB 2.0 (TYPe-A, host port, protected optional with serial multistandard interface)






S1: 2 x MiniPCI on board, 1 x PCI or 1 x PCIe x4 for max 3w half size cardBattery Type Lithium CR20032 (3V)

Removable YesLifetime 5 years



Input voltage 18÷36 VDC (18÷32 VDC with UPS)Power consumption TBDUPS Optional with batteries kit for rear system or detached mounting, 227 x 41.8 x 73.5 mm (w x H x D)



Measurements Dimensions (wxHxD) weight (Kg)mm S0 339 x 246 x 76 TBD

S1 339 x 246 x 106 TBDenvironmental characteristicsTemperature Operation 0° ÷ +50°C also with HDD 24x7, 5° ÷ +45°C with standard HDD







Intel® Celeron™ 1020e2.2GHz2 / 22MB Smart cache35w / 64bit/ 22nmIntel® HM76




FeATUReS | PLUS


Notes1 with True Flat front panel, touchscreen is mandatory.Stainless Steel front panel have no USB port on the front2 RS-232/422/485 standard and optoisolated can be installed one alternative to the other




NEW ASEMSTANDARDS

PB3000The new fanless PB3000 Panel PC family is equipped with the Intel Ivy Bridge platform and 17 or 35 watt third generation Core i7, Core i5, Core i3 and Celeron Dual Core processors, based on the 22 nm manufacturing process. To date, PB3000 Box PCs reach the highest performance with a Fanless system.The all-in-one motherboard integrates two USB 3.0 and two USB 2.0 ports, three 10/100/1000 Mbps ethernet with “Jumbo Frame” and “Wake on Lan” support, one RS232 serial interface, a standard VGA or DVI-I video output, one external-access CFast SATA II slot and up to 16 GB of RAM memory with two 1600 Mhz DD3 SODIMM modules.To meet different price/performance needs, PB3000 Box PC are available with 5 different processors.

Figure 1: Motherboard MB1151

Figure 2: Chassis

Figure 3: Close up network

XP ProweSw7 Pro

UPS24VDCPCIePCIMiniPCI

62

BOX PC

PerformanceSystem characteristicsMotherboard

CPU

Graphic

Video interfaces

System memory

Serial interfaces

Optional (note 1)


PS/2 interfaces

ethernet interfaces

USB interfaces

Compact Flash slots


expansion slots

Battery


Power supply

Case

Measurements mm

Temperature

Humidity

Ce

UL

warranty

1


Processor FSB CacheSocket Chipset

Controller Memory

Type

Type Size Socket



Type Connection

Type

Type Controller

Type Transfer rate

Type

Parallel Serial

Type


Reset button LeDs

Type Input voltage Power consumptionUPS

Type Material

Operation Storage

Operation/Storage





All-in-one, ASeM MB951/B Voltages and temperature monitor Time programmable

Intel® Celeron M 373 1,5GHz 400MHz 1MB L2 Socket 478 uFC-BGA Intel® 915GMe + ICH6M

GMA900 integrated in Intel® 915GMe Shared - 64MB÷128MB system selectable

1 x VGA (DB15F - max resolution 2048x1536 QXGA)






2 x 10/100/1000Mbps (RJ45) Intel 82574L


1 x Type I (internal access), 1 x Type II (external access)

1 x SATA 1 1,5Gb/s 1 x ATA/100 Master/Slave (dedicated for CF Slots)

1 x PC/104 Plus or 1 x PCI half size


System / watch-dog Power, HDD, system fail, watch-dog

AT, integrated on board, auto ranging 18÷36 VDC 40w @ PB1300 Pentium M 2GHz 1GB RAMOptional


0° ÷ +50°C without HDD, +5° ÷ +45°C with 24x7 HDD -20° ÷ +60°C





Intel® Pentium M 760 2GHz 533MHz 2MB L2 Socket 478 uFC-BGA Intel® 915GMe + ICH6M

Dimensions (w x H x D) 252 x 190 x 96-160

weight (Kg) 2,0

63





Notes

Intel® Pentium M 740 1,73GHz 533MHz 2MB L2 Socket 478 uFC-BGA Intel® 915GMe + ICH6MPB1300

The PB1300 Box PC family is

equipped with 1,5 GHz Intel

Celeron and 1,73 GHz and 2 GHz

Intel Pentium M processors.

The all-in-one motherboard

integrates four USB 2.0, two

10/100/1000 Mbps ethernet, one

RS232 serial interface, a standard

VGA video output , one external-

access Compact Flash slot, and up

to 2 GB SODIMM DDR2 memory

module.

FeATUReS | PLUS






Figure 1: Industrial fieldbus

Figure 2: PCI slot

Figure 3: Intel® Celeron M and Pentium M

Processors up to 2GHz

PMCelM PCIPC/104Plus

UPS24VDC XP ProweSCe5 Ce6

2GB1GB512MBwALLDIN RAIL

64

BOX PC

PerformanceSystem characteristicsMotherboard

CPU

Raid

Graphic

Video interfaces

System memory

Serial interfaces

Optional (note 1)


PS/2 interfaces

ethernet interfaces

USB interfaces

Compact Flash slots


Optional device interfaces

expansion slots

Battery


Power supply

Case

Measurements mm

Temperature

Humidity

Ce

UL

warranty

1


ProcessorFSB Cache Socket Chipset

Controller Raid mode

Controller Memory

Type

Type Size Socket



Type Connection

Type

Type Controller

Type Transfer rate

Type

Serial Parallel

TypeType alternative


Reset button LeDs

Type Input voltage

Power consumption

Type Material

H1 (H2)H3H4

Operation Storage

Operation/Storage


Marks

Safety Certificate N°


RS-232/422/485 standard and optoisolated and parallel port can be installed one alternative to the others

All-in-one, ASeM MB1021/GA Voltages and temperature monitor Time programmable

Intel® Core 2 Duo T6400 2GHz 800MHz 2MB L2 Socket P Intel® 965GMe + ICH8eM

Integrated,only for H2, H3 and H4 version 0,1

GMA X3100 integrated in Intel® 965GMe Shared – up to 256MB system selectable

1 x VGA (DB15F - max resolution 2048x1536QXGA 60Hz), 1 x DVI-D (single link – max resolution 1600x1200 UXGA)

DDR2 PC5300 1 GB, 2 GB, 4GB 2 x SODIMM module





2 x 10/100/1000Mbps (RJ45) Intel 82566MM, Intel 82574L


1 x Type II (external access)

H1 / H2 H3 / H4

- 1 x DVD-Rw


System / watch-dog Power, HDD activity, LAN, Alarm fans/temperature

Auto ranging 110÷230VAC 140w 18÷36 VDC 140w (optional)45w @ PB650 H1 Core 2 Duo T8300 2GHz 1GB RAM







Dimensions (w x H x D) 370 x 236 x 60,5 (78,5) 370 x 236 x 117 370 x 236 x 160

weight (Kg) 4,8 6,4 8,0





Notes

H1 / H2 3 x SATA 2 3Gb/s 1 x ATA/100 Master/Slave (dedicated for CF Slot)

H3 / H4 3 x SATA 2 3Gb/s 1 x ATA/100 Master/Slave (dedicated for CF Slot) 1 x FDD,1 x DVD-Rw

H3 2 x PCI half size 1 x PCI, 1 x PCI-e x4 half size on riser card

H1 / H2 --

H4 3 x PCI, 1 x PCI-e x4 half size on riser card

Intel® Core 2 Duo T6600 2,2GHz 800MHz 2MB L2 Socket P Intel® 965GMe + ICH8eM

Intel® Core 2 Duo T9300 2,5GHz800MHz6MB L2Socket PIntel® 965GMe + ICH8eM

Intel® Core 2 Duo T9500 2,6GHz800MHz6MB L2Socket PIntel® 965GMe + ICH8eM

FeATUReS | PLUS

RAID 0,1 CONTROLLeR ON-BOARD

PCI/PCIe SLOTS FOR eXPANSION BOARDS




Figure 1: 4 PCIPCIe slots in the H4 version

Figure 2: Optional optical drives

Figure 3: Intel Core 2 Duo Microprocessors and 965GMe chipset

PB650The PB650 Box PC family is equipped with a 2 GHz to 2,6 GHz Intel Core 2 Duo processors with a cache memory ranging from 2 MB to 6 MB.The all-in-one motherboard integrates four USB 2.0, two 10/100/1000 Mbps ethernet, one RS232 serial interface, one external-access Compact Flash slot, RAID 0,1 functionality, one expansion connector for industrial fieldbus boards, one standard VGA o DVI-D video output and up to 4 GB of RAM memory with two DD3 SODIMM modules.

In H3 and H4 versions, the motherboard also integrates a connector for the installation of a backplane with different configurations of PCI and PCI Express expansion slots.

PCIePCI 220VAC24VDC

C2DCel

w7 ProXP ProweS

4GB2GB1GBwALLDIN RAIL

66

BOX PC

67

16GB8GB4GB2GBi7i5i3CeL

Performance

UPS220VAC24VDC




Intel® Core™ i7 3610Qe2,3GHz4 / 86MB Smart cache45w / 64bit/ 22nmIntel® QM77

System characteristicsMotherboard Model All-in-one, ASeM MB1151

Hw monitor Temperature monitorwatch-dog Time programmable

CPU Processor Intel® Celeron 1020e2,2GHz2 / 22MB Smart Cache35w / 64bit / 22nmIntel® QM77



Raid Controller Integrated in platform controller HUBRaid mode 0,1









USB interfaces Type 2 x USB 3.0 (TYPe-A, host port, protected), 2 x USB 2.0 (TYPe-A, host port, protected), 1 x USB 2.0 (TYPe-A, host port, protected), 1 x USB 2.0 (TYPe-A, host port, protected optional with serial multistandard interface)






S1: 2 x MiniPCI on board, 1 x PCI or 1 x PCIe x4S3: 2 x MiniPCI on board, 2 x PCI, 1 x PCIe x4 or 1 x PCI, 2 x PCIe x1




Input voltage 18÷36 VDC or 110÷230 VAC autorangingPower consumption TBDUPS Optional with 24VDC power supply, 12V batteries kit for rear system or detached mounting, 227 x 41.8 x 73.5 mm (w x H x D)

Mechanical characteristicsCase Type wall or Din Rail Mount


Measurements Dimensions (w x H x D) weight (Kg)mm S0 TBD TBD

S1 TBD








67

FeATUReS | PLUS


Notes1 with True Flat front panel, touchscreen is mandatory.Stainless Steel front panel have no USB port on the front2 RS-232/422/485 standard and optoisolated can be installed one alternative to the other

RAID 0,1 CONTROLLeR ON-BOARD




NEW ASEMSTANDARDS

PB5000The new PB5000 Box PC family is compliant with the New Asem Standard and it is equipped with the Intel Ivy Bridge platform and 17 or 35 watt third generation Core i7, Core i5, Core i3 and Celeron Dual Core processors, based on the 22 nm manufacturing process. The all-in-one motherboard integrates two USB 3.0 and two USB 2.0, three 10/100/1000 Mbps Ethernet with “Jumbo Frame” and “wake on Lan” support, RAID 0,1 functionality, one connector for the on-board installation of a mSATA III SSD, one RS232 serial interface, one external-access CFast SATA II slot, one standard VGA or DVI-I video output, connectors for the installation of two 2,5” SATA III HDDs or SSDs and up to 16 GB of RAM memory with two 1600 MHz SODIMM DDR3 modules.In S1 and S3 versions, the motherboard also integrates a connector for the installation of a backplane with different configurations of PCI and PCI express expansion slots. HT5000 Box PC are available with 220-110 VAC or 24 VDC input voltage.

Figure 1: Chassis

Figure 2: Close up Network

Figure 3: Close up RAM

XP ProweSw7 Pro

PCIePCIMiniPCI

Vesa PC

69

VeSA PCs are compact, fanless, ergonomic systems providing installation flexibility and a stylish design. Based on ultra low voltage Atom processors, they are available with plastic or aluminium with polyester surface finishing front panels.

68

70

FANLeSS

BOX PC

FeATUReS | PLUS

VeSA PC


Touchscreen

Motherboard

CPU

Graphic

System memory

Serial interfaces

ethernet interfaces VPK300-1L

VPK300-2L

USB interfaces

Compact Flash slots


Battery

Power supply

Case

Measurements mm

Temperature

Humidity

Ce

warranty





Size Type Resolution Colors Pixel pitch Backlight Luminance Contrast Viewing angle L:R/U:L (typ) Lifetime (min.)

Technology Light transimission MTBF Linearity deviation Interface



Controller Memory

Type Size Socket


Type Controller

Type Transfer rate

Type

Transfer rate

Type

Paralle


Type Input voltage Max current Power consumption

Type Material Protection Color

8,4”

Operation Storage

Operation/Storage

emission

Immunity Safety


8,4” Color LCD TFT 800 x 600 (SVGA) 256K 0,213 x 0,213mm LeD 400cd/m2 400:1 60°: 60°/45°:45° 70.000h

4 wires – analog - resistive 80% ±5% @ 550nm 35mln touches < 1 % Serial




DDR2 PC5300 512 MB, 1 GB Soldered on board


1 x 10/100/1000Mbps (RJ45) Intel 82574L

2 x 10/100/1000Mbps (RJ45) Intel 82574L

5 x USB 2.0 (rear, TYPe-A, host port), 1 x USB 2.0 (internal, TYPe-A, host port), 1 x USB 2.0 (internal for USB dongle key) Up to 480Mbit/s (high speed)

1 x Type I internal access

1 x ATA/66 Master (dedicated for CF Slot)


Integrated on board, auto ranging 18÷36 VDC 1,6 A 20W basic configuration (with 5USB peripherals)

For VeSA 75 arm mounting Plastic IP65 frontal Grey

0° ÷ +45°C -20° ÷ +60°C





weight (Kg) 1,8

71


VPK300VPK300 is equipped with 1,1 GHz

z510P or 1,6 GHz z530P Intel Atom

processors. The all-in-one motherboard

integrates five external-access USB

2.0, one RS232 serial interface, one

internal-access Compact Flash slot,

two 10/100/1000 Mbps ethernet and up

to 1 GB RAM.

VPK300 is available with 256K colors TFT

8,4” LeD Backlight LCD in 4:3 aspect

ratio, 4 wires resistive touchscreen

and thermoplastic chassis with VeSA

mounting.

SMALL FORM FACTOR

SUITABLe FOR TeST & MeASUReMeNT AND DeSK VISUALIzATION

VeSA MOUNTING AND INSTALLATION


Figure 2: Plastic case with table stand

Figure 3: Intel Atom Microprocessors

8,4” VeSA 24VDCATOM w7XPeCe6Plastic1GB512MBRes 4

FANLeSS

BOX PCVeSA PC

72



15” Color LCD TFT 1024 x 768 (XGA) 16M 0,297 x 0,297mm LeD 400cd/m2 600:1 80°:80°/80°:80° 50.000h

5 wires – analog - resistive 80% ±2% 35mln activations < 1 % Serial

All-in-one, ASeM MB991/B Temperature monitor Time programmable


GMA500 integrated in Intel® US15wP 1-4-8MB shared




2 x 10/100/1000Mbps (RJ45) Intel 82574L

2 x USB 2.0 (rear, TYPe-A, host port, protected), 2 x USB 2.0 (front, TYPe-A, host port, protected) Up to 480Mbit/s (high speed)

1 x Type II (internal access – remove rear cover before)

1 x SATA1

2 x MiniPCI


System / watch-dog Power / HDD activityPower / HDD activity / watch-dog / Alarms

Left, Right, Left&Right Predisposition 2 x 4 matrix, holes Ø22 Customizable

Compact, 86 keys, US-international, anti-glare protection emergency stop button, hole Ø22

Integrated on board, auto ranging 18÷36 VDC 25w @ VPC15 15” ATOM z530P 1.6GHz T/S 512MB RAM

For VeSA 75-100 / RITTAL CP-S / ROLeC TARAPLUS arm mountingSteel painted RAL 7035 / 7024

IP65 Aluminum alloy with polycarbonate foil RAL 7035

0° ÷ +45°C -20° ÷ +60°C




Dimensions (w x H x D) 400 x 335 x 60 150 x 335 x 60 400 x 180 x 37

weight (Kg) 9,0 2,0 3,0

Display

Touchscreen

Motherboard

CPU

Graphic

System memory

Serial interfaces

Optional (note 1)

ethernet interfaces

USB interfaces

Compact Flash slots


expansion slots

Battery


Side Modules Optional

Keyboard Module Optional

Power supply

Case

Front panel

Measurements mm

Temperature

Humidity

Ce

warranty

1

Size Type Resolution Colors Pixel pitch Backlight Luminance Contrast Viewing angle Lifetime (min.)

Technology Light transimission MTBF Linearity deviation Interface



Controller Memory

Type Size Socket



Type Controller

Type Transfer rate

Type

Parallel

Type


Reset button LeDs frontalLeDs rear

Position Buttons and leds Labelling

Layout Predisposition

Type Input voltagePower consumption

Type Meterial Color


VPC Side module Keyboard

Operation Storage

Operation/Storage

emission

Immunity Safety






Notes

73

VPC15VPC15 is equipped with 1,1 GHz z510P

and 1,6 GHz z530P Intel Atom processors.


two rear-access USB 2.0, two USB 2.0 on

the front panel, two 10/100/1000 Mbps


one RS232/422/485 serial interface, one

internal-access Compact Flash slot and up

to 2 GB SODIMM DDR2 memory module.

VPC15 is available with 15” 4:3, 16 million

colors TFT LeD Backlight LCD, 5 wires

resistive touchscreen and aluminium with

polyester finish surface front panel.

FeATUReS | PLUS


VeSA MOUNTING AND INSTALLATION

OPTIONAL SIDe MODULeS AND KeYBOARD

VeSA 75/100, RITTAL CP-S e ROLeC TARAPLUS COMPLIANT


Figure 2: Optional side modules with buttons predisposition

Figure 3: Simple mounting system

15” ATOM MiniPCI

ROLeCRITTALVeSA 24VDC w7XPeCe6Alu

2GB1GB512MBRes 5

74 75

Rack PC4U 19” rack solutions, with a wide choice in terms of configurations, processors, motherboards and expansion slots. Intel Core i3, i5, i7 processors provide high computing power and high perfomance for data storage applications.

76 77

Rack 19” PR4x46 systems are equipped with third generation Intel Pentium and Core i3, i5 and i7 processors. The motherboard integrates three PCI slots, two x16 PCIe slots, two x4 PCIe slots, four USB 3.0, eight USB 2.0, two 10/100/1000 Mbps ethernet, one RS232/422/485 multistandard serial interface, DVI and HDMI video output, audio I/O, up to 32MB system memory and the possibility to install up to two 3,5” SATA III disks also in RAID 0,1 functionality.PR4146 has the same technical features of PR4046 but a reduced cabinet depth.

PR4046 / PR4146

RID220VAC4U ATX 16GB8GB4GB PCIePCI XP Prow7 Pro

System characteristicsMotherboard

CPU

Graphic

System memory

Video interfaces

PS/2 interfaces

Serial interfaces

ethernet interfaces

USB interfaces

Audio interfaces


expansion slots

Power supply

Optional

Case

Measurements

Temperature

Humidity

Ce

warranty






Processor Frequency Bus/Core ratio Cache Socket Chipset

Controller Memory

Type Size Socket

Type

Type


Type Controller

Type Transfer rate

Type

TypeRaid

Type

Type Input voltage

Type

Dimensions (w x H x D) weight

Operation Storage24/7

Operation/Storage



ATX format, CL630-CRM Temperature monitor Time programmable

Intel® Pentium™ G20303 GHz2 / 23MB Intel Smart Cache55w / 64bit/ 22nmIntel® C216 express Chipset

Intel® HD Graphics @650MHzIntel Dynamic Video Memory Technology

DDR3 1066/1333/1600 SDRAM 4 GB, 8 GB, 16GB, 32GB 4 x DIMM modules

1 x DVI-I, 1 x DVI-D, 1 x HDMI (digital max resolution 1920x1200 wUXGA, analog max resolution 2048x1536 QXGA)


1 x RS232/422/485 (DB9M), 2 x RS232 (DB9M on bracket)16550 compatible (FIFO 16 byte)115Kbps maxNo

2 x 10/100/1000Mbps (RJ45) Intel 82579LM, Intel 82574L

4 x USB 3.0 (rear, TYPe-A, host port - 2 on front), 6 x USB 2.0 (2 on rear, 2 on front, 2 on brackets, TYPe-A, host port) USB 3.0 up to 5Gbit/s (super speed), UBS 2.0 up to 480Mbit/s (high speed)

Mic IN, Line IN, Line OUT (configurable)

4 x SATA II 3Gb/s, 2 x SATA II 6Gb/s 0, 1, 10, 5 on SATA II

3 x PCI full size (32bit, 33MHz, Rev.2.3) * 2 x PCIe x16 (1 x16 se Gen3 / 2 x8 se Gen2) * 2 x PCIe x4 (1 x4 Gen2, 1 x1/x4 Gen2)

AT/ATX 110÷230 VAC 400w autoranging 110÷230 VAC 650w autoranging 90÷265 VAC 2 x 500w autoranging, redundant (only for PR4045)

4U 19” rack mount nickel steel chassis

PR4046 PR4146 483 x 177.8 x 503 mm 483 x 177.8 x 454 mm 13 Kg 13 Kg

0° ÷ +50°C -20° ÷ +60°CYes80% (non-condensing)



Intel® Core™ i3-32403,4 GHz2 / 43MB Intel Smart Cache55w / 64bit/ 22nmIntel® C216 express Chipset

Intel® Core™ i5-3470S2,96 GHz4 / 46MB Intel Smart Cache65w / 64bit/ 22nmIntel® C216 express Chipset

Intel® Core™ i73,1 GHz4 / 88MB Intel Smart Cache65w / 64bit/ 22nmIntel® C216 express Chipset

Intel® HD Graphics 2500 @650MHzIntel Dynamic Video Memory Technology



i7i5i3P

RACK PC

System characteristicsMotherboard

CPU

Graphic

System memory

Video interfaces

PS/2 interfaces

Serial interfaces

Parallel interfaces

ethernet interfaces

USB interfaces

Audio interfaces


expansion slots

Power supply

Optional

Case

Measurements

Temperature

Humidity

Ce

warranty






Processor Frequency Bus/Core ratio Cache Socket Chipset

Controller Memory

Type Size Socket

Type

Type


Type Connection

Type Controller

Type Transfer rate

Type

TypeRaid

Type

Type Input voltage

Type

Dimensions (w x H x D) weight

Operation Storage24/7

Operation/Storage



ATX format, DS3076-S-S Temperature monitor Time programmable

Intel® Core i3-2100 3,1GHz 31 3MB L2 Socket LGA1155 Intel® Q67-PCH express Chipset

Intel® HD Graphics 2000 @850MHz, integrated in processor Shared – Up to 128MB fixed and 256MB dynamic

DDR3 1066/1333 SDRAM 2 GB, 4 GB, 8GB, 16GB 4 x DIMM modules

1 x DVI-I (max resolution 1920x1200 wUXGA), 1 x DisplayPort (max resolution 2560x1600 wQXGA)




2 x 10/100/1000Mbps (RJ45) Intel 82579LM, Intel 82574L

10 x USB 2.0 (rear, TyPE-A, host port - 2 on front), 1 x USB-dongle (internal, TyPE-A, host port), 1 x USB 2.0 for flashdrive, 2 x USB 2.0 internal on connector Up to 480Mbits (high speed)

Mic IN, Line IN, Line OUT (configurable)

4 x SATA II 3Gb/s, 2 x SATA II 6Gb/s 0, 1, 10, 5 on SATA II

4 x PCI full size (32bit, 33MHz, Rev.2.3), 1 x PCIe x16 (16 Lanes, Gen2), 1 x PCIe x16 (4 Lanes, Gen2), 1 x PCIe x8 (1 Lane, Gen2)

AT/ATX 110÷230 VAC 400w autoranging 90÷265 VAC 2 x 500w autoranging, redundant (only for PR4045)

4U 19” rack mount nickel steel chassis

PR4045 PR4145 483 x 177.8 x 503 mm 483 x 177.8 x 454 mm 13 Kg 13 Kg

24/7, 0° ÷ +40°C -20° ÷ +60°CYes






Rack 19” PR4x45 systems are equipped with

second generation Intel Core i3, i5 and i7

processors. The motherboard integrates four

PCI slots, two x16 PCIe slots, one x8 PCIe

slot, ten USB 2.0, two 10/100/1000 Mbps

ethernet, two RS232 serial interfaces, DVI and

Display Port video output, one parallel port,

audio I/O, up to 16MB system memory and

the possibility to install up to two 3,5” SATA III

disks also in RAID 0,1 functionality.

PR4145 has the same technical features of

PR4045 but a reduced cabinet depth.

PR4045 / PR4145

RID220VAC4U ATX 4GB2GB1GB PCIePCI XP Proi7i5i3

78 79

MonitorIndustrial LCD Monitors from 8,4” to 21,5”, for panel, VeSA or rack mounting. Available with aluminium, aluminium True Flat, stainless steel True Flat with resistive touchscreens and aluminium True Flat with retro-projected capacitive Multitouch front panels.

MONITOR

8180

The USB standard allows the connection of 127 devices through a tree structure obtained by means of a USB HUB. The USB communication has tight timing that must be respected.each HUB device introduces a delay in the propagation of the signals which creates a limit of 5 HUB connected consecutively.The remote installation is a complex process which also intro-duces a delay in the transmission of signals and is fully equiva-lent to the connection of the maximum number allowed by the standard USB HUB.For these reasons configurations with external USB HUB are not allowed.

Standard USB and remotation

The remoting system developed by ASeM is based on the serialization of video and USB signals. The signals are made more robust and transmitted differentially through an ethernet cable. The remoting kit consists of a local transmission module, located near the PC, and a remote receiver module integrated into the ASeM monitor. This technology allows the transmission of high-quality signals at a distance of up to 40 meters, using the auto-equalization to compensate losses and delays caused by the distance.

ASeM Remotation

MONITOR

New ASeM STANDARDS COMPLIANT: • STANDARD CUT-OUT FOR PANEL PCs AND MONITORS • FRONT PANEL IN FOUR DIFFERENT vERSIONS • 24 DC POWER SUPPLy WITH GALvANIC ISOLATION




P-CAPGFGRes 5

FeATUReS | PLUS

82

System characteristicsDisplay Size 8.4” 10.4” 12.1” 12.1”XGA 15.0” 15.6” 17” 18.5” 19” 21,5”

Type Color LCD TFT Color LCD TFT Color LCD TFT Color LCD TFT Color LCD TFT Color LCD TFT Color LCD TFT Color LCD TFT Color LCD TFT Color LCD TFTResolution 800x600 (SVGA) 800x600 (SVGA) 800x600 (SVGA) 1024x768 (XGA) 1024x768 (XGA) 1366x768 (wXGA) 1280x1024 (SXGA)1366x768 (wXGA) 1280x1024 (SXGA)1920x1080 (FHD)Colors 16.2M 16.2M 16.2M 16.2M 16.2M 16.7M 16.7M 16.7M 16.7M 16.7MPixel pitch 0,213 x 0,213mm 0,264x0,264mm 0,3075x0,3075mm0,240 x 0,240mm 0,297x0,297mm 0,252x0,252mm 0,264 x 0,264mm 0,300x0,300mm 0,294 x 0,294mm 0,300x0,300mmBacklight LeD LeD LeD LeD LeD LeD LeD LeD LeD LeDLuminance 450cd/m2 400cd/m2 500cd/m2 600cd/m2 450cd/m2 300cd/m2 350cd/m2 300cd/m2 350cd/m2 300cd/m2

Contrast 600:1 700:1 800:1 700:1 700:1 500:1 1000:1 1000:1 1000:1 5000:1Viewing angle L:R/U:L(typ) 80°:80°/80°:60° 80°:80°/60°:80° 80°:80°/80°:60° 80°:80°/70°:70° 80°:80°/70°:70° 85°:85°/80°:80° 85°:85°/80°:80° 170° H, 160° v 85°:85°/80°:80° 178°/178°Lifetime 50.000h 50.000h 100.000h 50.000h 50.000h 50.000h 50.000h 50.000h 50.000h 50.000h

Video Inputs Type 1 x VGA (DB15F), 1 x DVI-D single link (optional)

Touchscreen Technology 5 wires – analog - resistive Projective capacitive - 4 fingers - antiglareOptional Light transimission 80% ±2% 90% ± 3%

Lifetime 35mln activations 100mln activationsLinearity deviation < 1 % < 1%Interface USB, Serial (optional) USBGlass Film Glass Optional only for 12.1”, 15” and 17” aluminum front panel -

Serial interfaces Type 1 x RS232 (DB9M) for touchscreenOptional UART 16550 compatible (FIFO 16 byte)

Transfer rate 115kbps maxOptoisolation No

USB interfaces Type 2 x USB 2.0 (rear, TYPe-A, host port, protected), 1 x USB 2.0 (front, TYPe-A, host port, protected), 1 x USB 2.0 (rear, TYPe-B, client port(rear, TYPe-B, client port – HUB/touchscreen input)


Buttons, leds LeDs Powerand keys OSD Yes, by 3 buttons on rear

electrical characteristicsPower supply Input voltage 18÷32 VDC not isolated or110÷230VAC autoranging

Power consumption [email protected]”, [email protected]”



Front panel TypeProtectionConstructionColorTouchscreen

Measurements MH (w x H x D) Cutout (w x H) weight (Kg)mm 8,4” 250 x 210 x 64 230 x 190 3,1

10,4” 300 x 245 x 64 280 x 225 3,912,1” 335 x 270 x 64 315 x 250 4,615” 390 x 315 x 64 370 x 295 5,315,6” 430 x 275 x 64 410 x 255 6,017” 455 x 355 x 66 435 x 335 6,718,5” 500 x 320 x 64 480 x 300 7,319” 490 x 388 x 66 470 x 368 7,321,5” 579 x 367 x 68 559 x 347 8,4

environmental characteristicsTemperature Operation 0° ÷ +45°C



warranty & ApprovalsUL Marks cULus Listed





MHThe new MH monitor family is compliant

with the New ASeM STANDARDS and it is

available with 8,4”, 10,4”, 12,1” - SVGA e

XGA - 15” in 4:3 aspect ratio, 17” and 19” in

5:4 aspect ratio, 15,6”, 18,5” and 21,5” in 16:9

wide 16 million colors TFT LeD Backlight

LCDs.

The front panels are in aluminium and True Flat

aluminium with 5 wires resistive touchscreens.

wide versions are available with glass True

Flat with retro-projected capacitive Multitouch

touchscreen front panels. The 12,1”, 15”,

17” and 19” versions are also available with

stainless steel True Flat front panels.

MH monitors are equipped with a standard

VGA and DVI-D input video, 220÷110 VAC

or 18÷36 VDC input voltage with or without

galvanic isolation, one front-access USB 2.0

and two rear-access USB 2.0.

Stainless steel TrueFlat Front Panel

MH-TFM (w x H x D)----430 x 275 x 64-500 x 320 x 64-579 x 367 x 68

MH-TF (w x H x D)250 x 210 x 64300 x 245 x 64335 x 270 x 64390 x 315 x 64430 x 275 x 64455 x 355 x 66500 x 320 x 64490 x 388 x 66579 x 367 x 68

MH-TFX (w x H x D)--335 x 270 x 64398 x 315 x 64-455 x 355 x 66-490 x 388 x 66-

MHIP66Full Alluminium alloy-optional

MH-TFIP66Alluminium True Flat with polyester foilPANTONe Cool Gray 4CYes, with OCA (Optical Clear Adhesive)

MH-TFMIP66KGlassBlackYes, with OCA (Optical Clear Adhesive)

MH-TFXIP66KStainless steel True Flat with polyester foilRAL 7035Yes, with OCA (Optical Clear Adhesive)

83

220VAC24VDCDVI

21,5”w18,5”w17”

VGA Panel

15”12,1”10,4”8,4” 15,6”w

NEW ASEMSTANDARDS

MONITOR

System characteristics15” Color LCD TFT 1024 x 768 (XGA) 16M 0,297 x 0,297mm LeD 450cd/m2 700:1 80°:80°/70°:70° 50.000h

12.1” XGA Color LCD TFT 1024x768 (XGA) 16.2M 0,240x0,240mm LeD 600cd/m2 700:1 80°:80°/70°:70° 50.000h

12,1” Color LCD TFT 800 x 600 (SVGA) 16.2M 0,307 x 0,307mm LeD 500cd/m2 800:1 80°:80°/80°:60° 100.000h

17” Color LCD TFT 1280 x 1024 (SXGA) 16M 0,264 x 0,264mm CCFL 4 lamps 300cd/m2 1000:1 80°:80°/80°:80° 50.000h

19” Color LCD TFT 1280 x 1024 (SXGA) 16M 0,294 x 0,294mm LeD350cd/m2 1000:1 85°:85°/80°:80° 50.000h





Display

Video inputs

Touchscreen

USB interfaces

Buttons and leds

Remotation MT-R

Power supply

Case

Front panel

Measurements mm

Temperature

Humidity

Ce

warranty

8,4” Color LCD TFT 800 x 600 (SVGA) 256K 0,213 x 0,213mm LeD 400cd/m2 370:1 60°:60°/45°:55° 70.000h

1 x VGA (DB15F) , 1 x DVI-D single link

5 wires – analog – resistive 80% ±2% 35mln activations < 1 % USB

Optional only for 12,1", 15" and 17" Aluminium Front Panel

2 x USB 2.0 (rear, TYPe-A, host port), 1 x USB 2.0 (front, TYPe-A, host port, protected),1 x USB 2.0 (rear, TYPe-B, client port - HUB/touchscreen input) Up to 480Mbit/s (high speed)

Power Yes, by 3 buttons on the back

Serialization of video and USB signals 15m, 20m. 30m, 40m CAT 5e, CAT7

18÷32 VDC not isolated or 110÷240 VAC autoranging

Panel mount Steel, nickel treatment

MT

IP65 Full Aluminum alloy -

optional

0° ÷ +45°C -20° ÷ +60°C




Size Type Resolution Colors Pixel pitch Backlight Luminance Contrast Viewing angle (typ.) Lifetime (min.)

Type

Technology Light transimission Lifetime Linearity deviation Interface

Glass Film Glass

Type

Transfer rate

LeDs OSD

Type Max length Cables type

Input voltage

Type Material

Type


Touchscreen

8,4” 12,1” 15” 17” 19”

Operation Storage

Operation/Storage



MT-TFX

IP66K Stainless Steel True Flat with polyester foil RAL 7035

Yes, with OCA (Optical Clear Adhesive)

Aluminium (w x H x D) 250 x 210 x 103 335 x 270 x 103 390 x 315 x 103 455 x 355 x 103 490 x 388 x 103

Stainless Steel (w x H x D) - 335 x 270 x 103 398 x 315 x 103 455 x 355 x 103 -

Cutout (w x H) 230 x 190 315 x 250 370 x 295 435 x 335 470 x 368

weight (Kg) 3,1 4,6 5,3 6,7 7.3

84 85

MTThe MT monitor family is available with

8,4", 12,1" - SVGA and XGA - 15” in 4:3

aspect ratio, 17” and 19” in 5:4 aspect

ratio 16 million colors TFT LeD Backlight

LCDs, aluminium with polyester finish

surface front panels and 5 wires resistive

touch-screens.

The 12,1”, 15”, 17” and 19” versions

feature stainless steel True Flat front

panels.

MT monitors are equipped with a

standard VGA and DVI-D input video,

220÷110 VAC or 18÷36 VDC input

voltage with or without galvanic isolation,

one front-access USB 2.0 and two rear-

access USB 2.0.

MT monitors family can

be equipped with an

internal remotation

module that allows to

reach up to 40 meters

VGA and USB connections.

FeATUReS | PLUS

UP TO 40 MeTReS (MT-R) USB AND VIDeO SIGNALS ReMOTATION.

FRONT PANeL IN TwO DIFFeReNT VeRSIONS



Figure 2: Remotation kit with integrated receiver module

GFG 220VACPanel InoxAlu DVIVGA Yes 24VDCRes 5

19”12,1”X 15” 17”12,1”8,4”

86

MONITOR


Video inputs

Touchscreen

USB interfaces

Buttons and leds

Remotation optional note 1

Side Modules optional

Keyboard Module optional

Power supply

Case

Front panels monitor and modules

Measurements

Temperature

Humidity

Ce

warranty

1

Size Type Resolution Colors Pixel pitch Backlight Luminance Contrast Viewing angle (typ.) Lifetime (min.)

Type

Technology Light transmission Lifetime Linearity deviation Interface

Type

Transfer rate

LeDs OSD

Type Max length Cables type

Position Buttons and leds Labeling

Layout Predisposition

Input voltage

Type Material Color


Monitor Side modules Keyboard

Operation Storage

Operation/Storage



Granted USB 1.1 using remotation, no external USB HUB admitted

15” Color LCD TFT 1024 x 768 (XGA) 16M 0,297 x 0,297mm CCFL 4 lamps 400cd/m2 400:1 150° H, 135° v 35.000h

1 x VGA (DB15F)

5 wires – analog – resistive 80% ±2% 35mln activations < 1 % USB2 x USB 2.0 (rear, TYPe-A, host port), 2 x USB 2.0 (front, TYPe-A, host port, protected),1 x USB 2.0 (rear, TYPe-B, client port - HUB input)Up to 480Mbits (high speed)

Power/Status Yes, by 3 buttons on the back

Serializaion of video and USB signals 15m, 20m. 30m, 40m CAT 5e, CAT7

Left, Right, Left&Right Predisposition 2 x 4 matrix, holes Ø22 Customizable

Compact, 86 keys, US-international, anti-glare protection emergency stop button, hole Ø22

24 VDC

For VeSA 75-100 / RITTAL CP-S / ROLeC TARAPLUS arm mounting Steel painted RAL 9006 / 7024

IP65 frontal Aluminum alloy with polycarbonate foil Pantone 429C

0° ÷ +45°C -0° ÷ +60°C








Notes

87

Dimensions (w x H x D) - mm 400 x 335 x 50 150 x 335 x 50 400 x 180 x 37

weight - Kg 8,0 2,0 3,0

FeATUReS | PLUS

MV15MV15 monitor is available with 15" in

4:3 aspect ratio 16 million colors TFT

LeD Backlight LCD, aluminium with

polyester finish surface front panel and

5 wires resistive touchscreen .

MV15 monitor integrates a standard

VGA video inuput, 18÷36 VDC input

voltage, two front-access USB 2.0 and

two rear-access USB 2.0.

The MV15 monitor can be equipped

with an internal remotation module

that allows to reach up to 40 meters

USB and VGA connections and has

the possibility to combinine a keypad

module and two side modules to install

buttons, switches, signal lamps and /

or emergency command.

UP TO 40 MeTReS USB AND VIDeO SIGNAL INTeGRATeD ReMOTATION.

OPTIONAL SIDe MODULeS AND KeYBOARD

VeSA 75/100, RITTAL CP-S e ROLeC TARAPLUS COMPLIANT

IP65 FRONT PROTeCTION RATING

Figure 1: Remotation kit with integrated receiver module

Figure 2: Two USB ports on the front panel

Figure 3: Simple mounting system

Yes15” VeSA Alu VGA 24VDCRes 5

Custom solutions

Custom light solutionCustom-light services provide different levels of customization of ASEM standard products:

Aesthetic custom-light, such as:• removal or substitution of the ASEM trademark with a label showing the brand and/or logo of the customer;• customization of front film with silkscreen printing of client brands and/or logotype;

Mechanical custom-light, such as:• personalization of the shape and/or thickness of the front panel;• customizations of keyboard layout on the front panel;

Electronic custom-light, such as:• creation of a different backplane;• addition of communication interfaces and/or modification of the standard configuration;

The customizations described do not involve structural changes to standard products, and meet the typical needs of OEMs and System Integrators who want to offer their own solutions to the market with a homogeneous representation of the brand. Custom-light solutions can be implemented relatively quickly and for low volume.

Custom full solutionThe custom-full services include the creation of new platforms and solutions based on client specifications. With reference to that, ASEM does not normally give away the intellectual property of custom projects, as their realization is solely dedicated to ASEM serial production.

Custom full services include the following development activities:

Mechanical custom-full, such as:• creation of a new mechanical solution, also with plastic parts, that uses existing electronic cards and/or motherboards;

Electronic custom full, such as:• development of new motherboards and/or electronic cards;

Complete custom-full, such as:• development of a new system or solution that includes the design of plastic and mechanical components as well as electronic boards.

The custom-full activity normally involves a subsequent production, also delayed in time, of a total amount of at least one thousand pieces.

Customer oriented philosophyThe customer oriented philosophy of ASEM is highlighted with attention and constant care of customer needs, thanks to a complete and qualified pre and after sales service. All internal processes are aimed at customer satisfaction, which is the center of all business activity to ensure an excellent level of product quality and operational flexibility that can respond quickly to changing market demands.

ASEM ensures the quality of product and process by adopting a systematic and rigorous management system for quality in compliance with UNI EN ISO 9001:2000 (VISION).The quality system, introduced in 1999, is certified by Moody International Certification, is constantly updated to improve the effectiveness and efficiency of company operations.

Customer careThe customer care service is led by a team of technical specialists able to respond with immediacy and clarity to customers needs, not only by telephone and via the Internet, but also through on-site visits and technical training courses. To optimize the process of care and repair of systems and to minimize response time, ASEM offers some effective services:- THE "HELP DESK PHONE" SERVICE which can be accessed by dialing the number 0432-967250, operating from Monday to Friday from 09:00 to 12:30 and from14:00 to 17:30. A qualified technician provides initial and timely technical assistance, or starts the procedure for returning the product (Return Material Authorization). Based on needs and the type of support required, the call may be routed to the most suitable ASEM specialist.- THE "HELP DESK ON-LINE" SERVICE allows access to the ASEM customer care directly online, through the company website www.asem.it. This easy and quick tool allows to request the technical assistance service individually and the RMA for any repair service, with real-time monitoring of the request status.In addition to these services, you can send any request for hardware, firmware and software support to the e-mail address [email protected].

SupportASEM assists its clients with complete hardware and software-related consultancy for Premium HMI® and CoDeSys applications It also offers timely and effective firmware-related assistance service with the creation of ad hoc "images" of the operating system. The advantage is to reduce the storage space required to install the operating systems (Microsoft Windows® CE, Window ® XP and Windows® XP Embedded, Linux and real time OS applications), keeping only the essential components for the proper functioning of the industrial PCs and integration with key external applications. The exclusive plus given by the ASEM service is to integrate, on customers' specific needs, also proprietary components.

Light

Full

SERVICES CUSTOM SERVICES

Soluzioni Custom Support & Service

Le soluzioni custom-lightLe soluzioni custom-light prevedono vari livelli di persona-lizzazione di prodotti standard a catalogo: custom-light estetici, quali ad esempio:• eliminazione o sostituzione dell'etichetta con marchio ASEM con una che riporta marchio e/o logotipo del cliente;• personalizzazione della pellicola frontale con serigrafia di marchi e/o logotipi del cliente;

custom-light meccanici, quali ad esempio:• personalizzazione della forma e/o spessore del pannello frontale;• personalizzazione del layout di tastiera sul pannello frontale;

custom-light elettronici, quali ad esempio:• realizzazione di un diverso backplane;• aggiunta di interfacce di comunicazione e/o modifica alla configurazione standard.

Le personalizzazioni descritte non implicano modifiche strutturali ai prodotti standard e soddisfano esigenze tipiche degli OEMs e System Integrators che desiderano offrire al mercato le proprie soluzioni con una rappresenta-zione omogenea del marchio.Le soluzioni custom-light possono essere realizzate in tempi relativamente brevi e per volumi non elevati.

Le soluzioni custom fullLe soluzioni custom-full prevedono la realizzazione di nuove piattaforme e sistemi integrati su specifiche delcliente. A riguardo si precisa che normalmente ASEM non cede la proprietà intellettuale dei progetti custom, in quanto la realizzazione degli stessi è esclusivamente finalizzata alla successiva produzione di serie.

Le soluzioni custom-full prevedono le seguenti attività di sviluppo:

custom-full meccanici, quali ad esempio:• realizzazione di una nuova soluzione meccanica, anche con particolari in plastica, che preveda l'utilizzo di mother-boards e/o schede elettroniche esistenti;

custom-full elettronici, quali ad esempio:• sviluppo di nuove motherboards e/o schede elettroniche;

custom-full completi, quali ad esempio:• sviluppo di un nuovo sistema o soluzione che preveda la progettazione di componenti meccanici, plastici e schede elettroniche.

L'attività di custom-full prevede normalmente una succes-siva produzione, anche dilazionata nel tempo, di una quantità complessivamente non inferiore al migliaio di pezzi.

SERVIZI CUSTOM

Customer Oriented PhilosophyProviding great customer service by paying constant attention to every customer need, thanks to a complete and qualified pre and post sales service, is the founding base of ASEM customer oriented philosophy. Ensuring the highest level of customer satisfaction is the core company's activity. All internal processes aim to ensure an excellent product quality and a higher degree of flexibility, in order to be responsive to the ever-changing market needs. To ensure product and process quality, ASEM has adopted the standard UNI EN ISO 9001:2008 (VISION) for its quality management system. Introduced in 1999 and certificated by Intertek Moody Certification, the standard sets out the require-ments of a quality management system to ensure that products and services consistently meet customer’s requirements, and that quality is consistently improved.

SupportASEM provide its customers with a complete consul-ting activity which involves hardware and software for Premium HMI, ASEM UBIQUITY and CODESYS. It also includes a prompt and efficient firmware assistance service with the creation on custom "image" of the operating system, which allows to shrink the memory space needed for the installation of the operative systems (Microsoft Windows® CE, Windows® XP e Windows® XP Embedded, Windows® 7, Windows® 7 Embedded, Linux applicative e OS real time) maintaining only the necessary components for the proper functioning of the industrial PC and the integration with the main applicative software. The added value of ASEM service is the possibility to integrate, upon request and according to customer’s need, also proprietary components.

Customer careThe customer care service is led by a team of technical specialists able to respond with immediacy and clarityto customers needs, not only by telephone and via theInternet, but also with on-site visits and technicaltraining courses. To optimize the process of care and repairof systems and to minimize response time, ASEM offerssome effective services:

- THE "HELP DESK PHONE" SERVICE can be accessed dialing the number +39/0432/967250, operatingfrom Monday to Friday from 09:00 to 12:30 and from14:00 to 17:30. A qualified technician provides initial assistance, or starts the procedure for repairing or replacing the product (Return Material Authorization).Based on needs and the type of support required, the call may be turned to the most suitable ASEM specialist.

- THE "HELP DESK ON-LINE" SERVICE allows access tothe ASEM customer care service directly online, through the company website www.asem.it. This easy and quick tool allows to request technical assistance for any repair service, with real-time monitoring of the request status.In addition to these services, you can send any requestfor hardware, firmware and software support to the e-mail address [email protected].

9809792

88

INDUSTRIALAUTOMATIONPRODUCT GUIDE

ASEM S.p.A.

ASEM | Artegna | Headquarters Via Buia 433011 Artegna (UD) | ItaliaPhone: +39/0432-9671Fax: +39/0432-977465

ASEM | GiussanoVia Prealpi 13/A20833 Giussano (MB) | ItaliaPhone: +39/0362-859111Fax: +39/0362-859121

ASEM | GermanyWalbenstraße 4172127 Kusterdingen-WankheimPhone: +49 (0) 7071 7963 070Fax: +49 (0) 7071 7963 071

email: [email protected]: www.asem.it

SALES NETWORK

ITALYGERMANYSWITZERLANDAUSTRIASLOVENIAARGENTINABELGIUMBRAZILCZECH REPUBLICFRANCEGREECEHOLLANDMIDDLE EASTNORWAYPOLANDSPAINSWEDENTURKEYUNITED KINGDOM

V. 14

Documents

INDUSTRIAL AUTOMATION PRODUCT GUIDE