9.13.2012 8AM - 5PM

HILTON GARDEN INN

6165 LEVIS COMMONS BLVD.

PERRYSBURG, OH 43551

Presented by

See the latest innovations in

Industrial Automation and Controls

Seminars

SEPTEMBER 13, 2012 8 :00am - 5:00pm Presented by Electro-Mat ic Products

Visit electro-matic.com to fill out a registration form or contact Amy Tylutki via e-mail at aktylutki@electro-matic or phone at 248-442-2902HOW TO REGISTER

Automating with SIEMENS Limited to 12 attendees*NIAGRA ROOM 9/12 8:00am - 5:00pm, 9/13 8:00am - 12:30pmJoin us for a fast-paced, 2-day workshop to experience how you can be at the forefront of automation technology with engineering tools based on the revolutionary Totally Integrated Automation (TIA) Portal engineering sostware and networking solutions using PROFInet communications. Take part in hands-on demonstrations for programming graphics, system diagnostics, plant diagnostics, maintenance, engineering configuration and network administration.

UL/IEC WorkshopNIAGRA ROOM 1:00pm - 5:00pmThis workshop will cover the IEC standards and how they differ from UL. The new IEC 61439-1 standard will be discussed. You will walk away with the understanding on how to design your equipment to meet the IEC and CE standards. This will give you an advantage over your competition when pursuing export markets. Panel design and build topics will be covered to help you save time and money on your next project.

What’s New in SIEMENS ControlsLAWRENCE ROOM 9:30am - 10:30amIncrease savings by decreasing panel build time, wiring, and space. Learn how to use the latest in modularity and connectivity in Sirius IEC controls. Go modular with the new M200D Machine Mounted IP65 Motor Starters, perfect for palletized assembly operations. Explore Siemens new reduced size and cost SITOP Modular, Smart, and Compact power supply offering. Decrease troubleshooting time and utilize Sequential Start-up to reduce the size of the 24VDC power supply in your panel using the NEW SITOP PSE200U diagnostic module. Check out Siemens low cost unmanaged Ethernet switches. MUST SEE the all new 3SE6 RFID & Magnetic Codedsafety switch, ONLY 1 GATE SWITCH REQUIRED for CAT4 (SIL3) SAFETY! Rugged and resistant to cleaning agents with IP69K rating!

What’s New From SIEMENS - Automation InnovationsLAWRENCE ROOM 10:30am - 11:30amCome see the new products that have just been released and get a sneak-peek at future Automation Products from SIEMENS. New ProfiNet I/O modules, ET200Pro Safety PLC, increased functionality of the S7-300 line, and see the new Comfort line of HMI's.

SIEMENS Motion TechnologiesLAWRENCE ROOM 11:30am - 12:30amExperience how SIEMENS can help you with any of your motion control needs, from a 1hp single phase pump to a 1,500hp Dyno stand. Let us show you the complete line up of Siemens motion control and application examples from the industry leader in motion control - General Purpose VFD's, Servo, Field Mountable Drives, and Large Drives.

SIEMENS SIMATIC S7-1200 Compact PLC - New InnovationsLAWRENCE ROOM 1:00pm - 2:00pmThe SIMATIC S7-1200 controller is modular, compact, versatile, and a secure investment that fits a full range of applications. A scalable and flexible design, a communication interface that fulfills the highest standards of industrial communication and a full range of powerful integrated technology functions make this controller an integral part of a complete and comprehensive automation solution. Join us for a demonstration of the latest features of the S7-1200 hardware, the Basic Panels HMI, and the Totally Integrated Automation Portal programming sostware.

This is a 1.5-day event. Separate Registration is required. Limited to 12 attendees. You must register and attend the 9/12 event to be eligible for the 9/13 event. To register, please contact Amy Tylutki at aktylutki@electro-matic.com

How to Make the Transition from Fieldbus to EthernetLAWRENCE ROOM 2:00pm - 3:00pmThe trend of using Ethernet based automation systems is not a new one, however, not every company is building a new plant or expanding with a new line. So how can existing installations quickly gain the benefits that Ethernet brings to the plant floor? This session will reiterate the value of an Ethernet based control system while demonstrating several methods to easily integrate existing fieldbus systems such as devicenet and Profibus.

TIA Portal InnovationsLAWRENCE ROOM 3:00pm - 4:00pmJoin us for a live presentation where Siemens automation experts will demo a completely new dimension in engineering sostware efficiency revealing how it can increase your company's performance and profitability. Come and see first hand how engineering has been redefined to save you time, money and effort. A powerful, yet simple, engineering platform that gives your business a competitive edge.

Intuitive user interface speeds learning and ongoing programming, editing Efficiency realized through working in ONE graphical interface/editor for all automation tasks Proven technology insures investment protection -- now and in the future

Industrial ID: RFID and Code Reading as a Competitive AdvantagePARLOR A 10:30am - 11:30amUnderstand how Industrial Identification technologies can improve your operations and processes while increasing data accuracy and reliability. Outperform your competition through track and trace capabilities, error proofing and asset management. Siemens offers Industrial Identification technologies including RFID and Code Reading Systems (1D and 2D barcodes) that are easily integrated into existing automation systems and PC driven process. Siemens has decades of experience developing and deploying Industrial Identification technologies to solve difficult applications. Bring your questions, challenging applications, or any other interests you may have to this seminar to see if Industrial Identification solutions are the right fit for you.

Open Solutions with SIEMENS PC Based AutomationPARLOR A 11:30am - 12:30amLearn how to boost productivity and lower your engineering costs using high quality, integrated hardware and sostware solutions for PC Based Automation from Siemens. With today's increasing needs for more open and high performance automation systems, Siemens will show you how to implement systems that maintain a high degree of ruggedness, system availability, and scalability. Seminar topic will include Siemens IPC's bundled with WinAC RTX PC Based control, WinCC HMI PC Based solutions, and ProfiNet I/O solutions, and the industries only truly PC Based safety solution. All supported and implemented using the Siemens TIA (Totally Integrated Automation) Portal programming environment.

SIEMENS Service and Support Web SitePARLOR A 1:00pm - 2:00pmLearn how to navigate the Service and Support website to get to the information you need when you need it. Examples of how to: download and create your own custom manuals, access the FAQ section, and downloading of updates. The mobile app version of this site will be discussed.

SINAMICS G120 Hands ON - The Universal VFD Limited to 12 attendees*PARLOR A 2:00pm - 4:00pmThe seminar will focus on features of the G120 such as modularity of design, integrated safety, and efficient in feed technology that make G120 drive more than the traditional general purpose drive. In addition to gaining product and application knowledge, attendees will gain an understanding of how to configure and commission the Sinamics G120 through hands-on exercises.

Seminars

Visit electro-matic.com to fill out a registration form or contact Amy Tylutki via e-mail at aktylutki@electro-matic or phone at 248-442-2902

HILTON GARDEN INN 6165 Levis Commons Boulevard Perrysburg, OH 43551

Wallmount EnclosuresAE, KS, CM, WM, EB, JB, KL, PK, GA, Slope Top, Push Button,Hygenic Design

Climate Control ProductsAir/Air & Air/Water Heat Exchangers,UL Type 12 ^ Type 4X Air Conditioners,Filter Fans, Thermoelectric Coolers, Heaters

TS8 Modular EnclosuresCarbon & Stainless Steel FreestandingFloormount, Disconnect, Networking

Power Distribution ProductsRi4Power, RiLine60

HMI ProductsCP-C, CP-L, CP-S & CP-XL Support Arms, Command Panel, Comfort Panel, TopConsole

See the latest products and videos and get copies of Rittal’s newest literature when touring the new Rittal Mobile Design Center. Getting hands-on with Rittal’s latest products couldn’t be easier.

Seminar and Tour Schedule

8:00am

8:30am

9:00am

9:30am

10:00am

10:30am

11:00am

11:30am

12:00pm

12:30pm

1:00pm

1:30pm

2:00pm

2:30pm

3:00pm

3:30pm

4:00pm

4:30pm

9.13 Niagra RoomCAPACITY: 40

Lawrence RoomCAPACITY: 40

Parlor ACAPACITY: 40

Rittal Mobile Design Center Tours

Automatingwith

Siemens

ALSO AN ALL DAYEVENT ON 9/12

REGISTRATION ISLIMITED TO 12

UL/IECWorkshop

What’s New inSIEMENS Controls

SIEMENS MotionTechnologies

What’s New inSIEMENS Automation

Open Solutions with SIEMENS PC Based

Automation

Industrial ID: RFID andCode Reading as a

Competitive Advantage

SIEMENS SIMATICS7-1200 Compact PLC

NEW Innovations

TIA Portal Innovations

How to Make theTransition from Fieldbus

to Ethernet

L U N C H

SIEMENS Service andSupport Web Site

SINAMICS G120 Hands OnThe Universal VFD

REGISTRATION ISLIMITED TO 12

Rittal Mobile DesignCenter Tour #2

Rittal Mobile DesignCenter Tour #3

Rittal Mobile DesignCenter Tour #4

Rittal Mobile DesignCenter Tour #1

HILTON GARDEN INN 6165 Levis Commons Boulevard Perrysburg, OH 43551

Rittal Mobile Design Center

Visit electro-matic.com for complete seminar descriptions, schedule and registration logMORE INFORMATION