12
10. TA required (Please tick (√) the Appropriate box) The participant will be paid TA up to 3 rd A.C. by shortest route subjected to production of travel documents. Date : Signature of applicant Note : 1. This application form should reach QIP Office latest by 04.07.2013. 2. Application without the approved letter will not be entertained for the course 3. Please note that 100% attendance is compulsory in the course. SPONSORSHIP CERTIFICATE The applicant will be permitted to participate in the above programme, if selected. Further, I have personally talked to the applicant and he/she seemed to be sure to attend the course, in case the admission is offered to him/her. This is to certify that this institute is recognized by AICTE. Date : Signature Sponsoring Authority (Principal / Director) SEAL Objectives of the Course Stochastic modeling and optimization have become indispensable tools in providing efficient solution methodology for various industrial problems. The nature of workshop on “Industrial applications of stochastic modeling and optimization” is interdisciplinary as modeling and optimization can play an important role in solving many real world problems encountered in engineering, economics, management, planning, etc. The main objectives of this workshop are (i) to offer a comprehensive view of the state of art of stochastic modeling and applications of classical and nature inspired evolutionary techniques for solving the industrial problems encountered in computer, telecommunication, manufacturing and service organizations, and (ii) to stimulate new researches on stochastic modeling and optimization. In order to facilitate the awareness of importance of theory and applications of stochastic models and optimization techniques in industrial scenarios, the workshop will provide hands-on experience on MATLAB and virtual lab to solve the optimization and traffic flow problems of some real life problems. Course Contents Introduction to Stochastic Modeling Classical optimization techniques and applications Fuzzy, neuro-fuzzy and genetic techniques Stochastic modeling of manufacturing systems Queueing network and inventory models Supply chain management and optimization Performance modeling of traffic flow in computer and communication systems Stochastic programming and applications in solving industrial problems Software and hardware reliability models Applications of soft computing algorithms in engineering problems Development of algorithms based on optimization and stochastic programming using MATLAB Course Coordinator: Dr. Madhu Jain Associate Professor Department of Mathematics Indian Institute of Technology Roorkee Roorkee – 247 667, Uttarakhand, India Phones: 01332-285521(O), 285506(R), 9412811021 (M) Emails: [email protected], [email protected] AICTE SPONSORED SHORT TERM COURSE INDUSTRIAL APPLICATIONS OF STOCHASTIC MODELING AND OPTIMIZATION Organizing Department Department of Mathematics Indian Institute of Technology Roorkee ROORKEE – 247 667 12.08.2013 to 16.08.2013 QUALITY IMPROVEMENT PROGRAMME CENTRE INDIAN INSTITUTE OF TECHNOLOGY ROORKEE - 247 667 (Uttarakhand) Phone : (01332) 285241, 284341 Fax : (01332) 286691, 273560 Email : [email protected], [email protected] Yes No

INDUSTRIAL APPLICATIONS OF Organizing Department brochure 2013… · • Stochastic modeling of manufacturing systems • Queueing network and inventory models • Supply chain management

  • Upload
    others

  • View
    5

  • Download
    0

Embed Size (px)

Citation preview

Page 1: INDUSTRIAL APPLICATIONS OF Organizing Department brochure 2013… · • Stochastic modeling of manufacturing systems • Queueing network and inventory models • Supply chain management

10. TA required (Please tick (√) the Appropriate box)

The participant will be paid TA up to 3rd

A.C. by shortest route subjected to production of travel documents.

Date : Signature of applicant Note : 1. This application form should reach QIP Office latest by 04.07.2013. 2. Application without the approved letter will not be

entertained for the course 3. Please note that 100% attendance is compulsory in

the course.

SPONSORSHIP CERTIFICATE The applicant will be permitted to participate in the above programme, if selected. Further, I have personally talked to the applicant and he/she seemed to be sure to attend the course, in case the admission is offered to him/her. This is to certify that this institute is recognized by AICTE.

Date : Signature

Sponsoring Authority (Principal / Director)

SEAL

Objectives of the Course

Stochastic modeling and optimization have become indispensable tools in providing efficient solution methodology for various industrial problems. The nature of workshop on “Industrial applications of stochastic modeling and optimization” is interdisciplinary as modeling and optimization can play an important role in solving many real world problems encountered in engineering, economics, management, planning, etc. The main objectives of this workshop are (i) to offer a comprehensive view of the state of art of stochastic modeling and applications of classical and nature inspired evolutionary techniques for solving the industrial problems encountered in computer, telecommunication, manufacturing and service organizations, and (ii) to stimulate new researches on stochastic modeling and optimization. In order to facilitate the awareness of importance of theory and applications of stochastic models and optimization techniques in industrial scenarios, the workshop will provide hands-on experience on MATLAB and virtual lab to solve the optimization and traffic flow problems of some real life problems.

Course Contents • Introduction to Stochastic Modeling • Classical optimization techniques and applications • Fuzzy, neuro-fuzzy and genetic techniques • Stochastic modeling of manufacturing systems • Queueing network and inventory models • Supply chain management and optimization • Performance modeling of traffic flow in computer and

communication systems • Stochastic programming and applications in solving

industrial problems • Software and hardware reliability models • Applications of soft computing algorithms in

engineering problems • Development of algorithms based on optimization and

stochastic programming using MATLAB

Course Coordinator: Dr. Madhu Jain Associate Professor Department of Mathematics Indian Institute of Technology Roorkee Roorkee – 247 667, Uttarakhand, India Phones: 01332-285521(O), 285506(R), 9412811021 (M) Emails: [email protected], [email protected]

AICTE SPONSORED SHORT TERM COURSE

INDUSTRIAL APPLICATIONS OF

STOCHASTIC MODELING AND OPTIMIZATION

Organizing Department

Department of Mathematics

Indian Institute of Technology Roorkee ROORKEE – 247 667

12.08.2013 to 16.08.2013

QUALITY IMPROVEMENT PROGRAMME CENTRE INDIAN INSTITUTE OF TECHNOLOGY

ROORKEE - 247 667 (Uttarakhand) Phone : (01332) 285241, 284341 Fax : (01332) 286691, 273560 Email : [email protected], [email protected]

Yes No

Page 2: INDUSTRIAL APPLICATIONS OF Organizing Department brochure 2013… · • Stochastic modeling of manufacturing systems • Queueing network and inventory models • Supply chain management

General Information Indian Institute of Technology, Roorkee is organizing a course on “Industrial applications of stochastic modeling and optimization” from 12.08.2013 to 16.08.2013. The course is open to teachers from AICTE recognized engineering colleges. Only limited seats are available in this course. Merit and availability of funds will be taken into consideration while selecting candidates. The application on the enclosed form duly signed by the sponsoring authority, should reach QIP Office latest by 04.07.2013. The candidate will be informed of his/her selection in advance. Candidates admitted will be provided free lodging and boarding. The boarding and lodging arrangement for all the participants is made in Trainee Officer’s Hostel (CEC Guest House) / Khosla International House on twin sharing basis. Those participants not availing this facility will not be entitled to any rebate. Family accommodation is not available on campus. However, one may make his/her own arrangement in city hotels at his/her own expense. While boarding and lodging is given free, priority in admission will be given to participants who will bear TA on their own or charge the same to their respective institutes. If so, please mention the same in the application form. Applications on attached form with due sponsorship should be sent at the address given below. In case, sponsorship is likely to take time, one can send an advance photo copy, so as to reach before the due date, by fax or speed post. However, no candidate will be admitted without due sponsorship.

About Roorkee

Roorkee is located at the foothills of Himalayas in the Uttarakhand State. The Railway Station is on the main line of Northern Railways having direct links to Delhi, Mumbai, Calcutta, Amritsar, Jodhpur and Ganganagar. The place is also within easy reach from Delhi by road (180 km) and is located on Delhi - Haridwar and Delhi - Dehradun bus routes. Roorkee is ideally located near several tourist places like Dehradun (70 km), Mussoorie (100 km), Haridwar (32 km) and Rishikesh (52 km).

List of Additional Short Term Courses during 2013-2014

Sl. No.

Name of Course Coordinator

Department Course Title Duration

1. Dr. Pradeep Kumar

Mech. & Ind. Engineering

Quality Management: Issues, Tools and Techniques

Postponed

2. Dr. Madhu Jain

Mathematics Industrial Applications of Stochastic Modeling and Optimization

Aug. 12-16, 2013

3. Dr. M.K. Barua Dr. Usha Lenka

Management Studies

Thesis/Technical writing”

Aug.19-23, 2013

4. Dr. Akshay Dvivedi Dr. A.K. Sharma Dr. Inderdeep Singh

Mech. & Ind. Engineering

Finish Machining: A State-of-the-Art

Sept. 2-6, 2013

5. Dr. Zilur Rahman Dr. Vinay Sharma Dr. Rajat Agrawal

Management Studies

Case Based Learning in Business & Management

Oct. 7-11, 2013

6. Dr. Pramod Agarwal Dr. Mukesh Kumar Pathak

Electrical Engineering

Mutli Level Inverter and Its Applications

Oct.28 -Nov. 01, 2013

7. Dr. Gaurav Raheja Prof. M. Parida

Arch. & Planning & Civil Engineering

Planning Strategies for Accessibility and Universal Design

Nov. 11-15, 2013

8. Dr. K.L. Yadav Dr. Partha Roy

Physics & Biotechnology

Recent Advances in Biomaterials and Nanobiotechnology

Dec. 2-06, 2013

9. Dr. Rajib Chowdhury Dr. R. Jayaganthan

Civil Engineering & Met. & Mat. Engineering

Introduction to Modeling and Simulation

Dec. 9-13, 2013

10. Dr. S.H. Upadhyay Dr. S.P. Harsha Prof. Satish C. Sharma

Mech. & Ind. Engineering

Modelling and Simulation of Dynamical Systems

Dec. 30-Jan 03, 2014

11. Dr. Indra Vir Singh Dr. B.K. Mishra

Mech. & Ind. Engineering

Modeling and Simulations using Finite Element Methods

Jan. 7-11, 2014

12. Dr. Rajib Lochan Dhar Dr. Santosh Rangnekar

Management Studies

Strategic Human Resource Management (SHRM) for effective performance

Feb. 3-7, 2014

Application Form for Short Term Course (STC)

on “INDUSTRIAL APPLICATIONS OF STOCHASTIC

MODELING AND OPTIMIZATION” Duration : 12.08.2013 to 16.08.2013

(You may get this form enlarged by Xeroxing on A4 Size paper or download

Application Form from website : www.iitr.ernet.in for submission of your application)

1. Name : Ms./Mr./Dr. (In Block Letters)

2. Designation :

3. Age (Years) :

4a. Residential address with pin code, telephone no., mobile Tel : Mobile :

4b. Complete official mailing address : (Including name of state and pin code number)

Email : Phone (Off.) Fax :

4c. Name of the Institute where employed :

4d. Name of the Department

5. Academic Qualification (degree onwards):

6. Specialization :

7. Teaching Experience in Years :

8. Subjects taught related to this STC 9. No. of STCs attended so far

At Roorkee .......... At other places ........ Total ..........

After Completion, Please Mail to : Dr. Rama Bhargava Coordinator Q.I.P. Centre, I.I.T. Roorkee ROORKEE – 247667 (Uttarakhand) Phone : (01332) 285241 & 284341 Fax : (01332) 286691, 273560 Email : [email protected]

Affix Passport Size Photograph

Page 3: INDUSTRIAL APPLICATIONS OF Organizing Department brochure 2013… · • Stochastic modeling of manufacturing systems • Queueing network and inventory models • Supply chain management

10. TA required (Please tick (√) the Appropriate box)

The participant will be paid TA up to 3rd

A.C. by shortest route subjected to production of travel documents.

Date : Signature of applicant Note : 1. This application form should reach QIP Office latest by 04.07.2013. 2. Application without the approved letter will not be

entertained for the course 3. Please note that 100% attendance is compulsory in

the course.

SPONSORSHIP CERTIFICATE The applicant will be permitted to participate in the above programme, if selected. Further, I have personally talked to the applicant and he/she seemed to be sure to attend the course, in case the admission is offered to him/her. This is to certify that this institute is recognized by AICTE.

Date : Signature

Sponsoring Authority (Principal / Director)

SEAL

Objectives of the Course: To help those who are pursuing / about to register themselves for the Ph.D. degree To help teachers of UG and PG programs in management and engineering institutes To establish and strengthen links with research institutes and organizations working in the area of Management research.

Course Contents i. Writing the first and final draft

ii. Editing and formatting issues iii. How to select the right journal vi. Submission and publication process

Submission of manuscripts Dealing with reviewers and editors’ comments Checking proofs Transferring copyrights Understanding the game of journal impact factors

vi. Issues on ethics and plagiarism in publications vi. Strategies and steps of writing

Structure of the manuscript How to write a review of literature Presentation of data How to present data in a Table or Graph Stylistic issues, how to select and cite references

Course Coordinator(s):

Dr. Mukesh Kumar Barua Assistant Professor Department of Management Studies Indian Institute of Technology, Roorkee Ph: 01332-28-5678 (O) 9359460608 (M) Email: [email protected] Dr . Usha Lenka Assistant Professor Indian Institute of Technology, Roorkee Ph: 01332-28-5816 (O) 9458947098 (M) Email: [email protected]

AICTE SPONSORED

SHORT TERM COURSE

“Thesis / Technical Writing”

Organizing Department

Department of Management Studies Indian Institute of Technology Roorkee

ROORKEE - 247667

August 19-23, 2013

QUALITY IMPROVEMENT PROGRAMME CENTRE INDIAN INSTITUTE OF TECHNOLOGY

ROORKEE - 247 667 (Uttarakhand) Phone : (01332) 285241, 284341 Fax : (01332) 286691, 273560 Email : [email protected], [email protected]

Yes No

Page 4: INDUSTRIAL APPLICATIONS OF Organizing Department brochure 2013… · • Stochastic modeling of manufacturing systems • Queueing network and inventory models • Supply chain management

General Information Indian Institute of Technology, Roorkee is organizing a course on “Thesis / Technical Writing” from 19.08.2013 to 23.08.2013. The course is open to teachers from AICTE recognized management and engineering colleges. Only limited seats are available in this course. Merit and availability of funds will be taken into consideration while selecting candidates. The application on the enclosed form duly signed by the sponsoring authority, should reach QIP Office latest by 04.07.2013. The candidate will be informed of his selection in advance. Candidates admitted will be provided free lodging and boarding. The boarding and lodging arrangement for all the participants is made in Trainee Officer’s Hostel (CEC Guest House) / Khosla International House on twin sharing basis. Those participants not availing this facility will not be entitled to any rebate. Family accommodation is not available on campus. However, one may make his/her own arrangement in city hotels at his/her own expense. While boarding and lodging is given free, priority in admission will be given to participants who will bear TA on their own or charge the same to their respective institutes. If so, please mention the same in the application form. Applications on the attached form with due sponsorship should be sent at the address given below. In case, sponsorship is likely to take time, one can send an advance photocopy, so as to reach before the due date, by fax or speed post. However, no candidate will be admitted without due sponsorship.

About Roorkee

Roorkee is located at the foothills of Himalayas in the Uttarakhand State. The Railway Station is on the main line of Northern Railways having direct links to Delhi, Mumbai, Calcutta, Amritsar, Jodhpur and Ganganagar. The place is also within easy reach from Delhi by road (180 km) and is located on Delhi - Haridwar and Delhi - Dehradun bus routes. Roorkee is ideally located near several tourist places like Dehradun (70 km), Mussoorie (100 km), Haridwar (32 km) and Rishikesh (52 km).

List of Additional Short Term Courses during 2013-2014

Sl. No.

Name of Course Coordinator

Department Course Title Duration

1. Dr. Pradeep Kumar

Mech. & Ind. Engineering

Quality Management: Issues, Tools and Techniques

Postponed

2. Dr. Madhu Jain

Mathematics Industrial Applications of Stochastic Modeling and Optimization

Aug. 12-16, 2013

3. Dr. M.K. Barua Dr. Usha Lenka

Management Studies

Thesis/Technical writing”

Aug.19-23, 2013

4. Dr. Akshay Dvivedi Dr. A.K. Sharma Dr. Inderdeep Singh

Mech. & Ind. Engineering

Finish Machining: A State-of-the-Art

Sept. 2-6, 2013

5. Dr. Zilur Rahman Dr. Vinay Sharma Dr. Rajat Agrawal

Management Studies

Case Based Learning in Business & Management

Oct. 7-11, 2013

6. Dr. Pramod Agarwal Dr. Mukesh Kumar Pathak

Electrical Engineering

Mutli Level Inverter and Its Applications

Oct.28 -Nov. 01, 2013

7. Dr. Gaurav Raheja Prof. M. Parida

Arch. & Planning & Civil Engineering

Planning Strategies for Accessibility and Universal Design

Nov. 11-15, 2013

8. Dr. K.L. Yadav Dr. Partha Roy

Physics & Biotechnology

Recent Advances in Biomaterials and Nanobiotechnology

Dec. 2-06, 2013

9. Dr. Rajib Chowdhury Dr. R. Jayaganthan

Civil Engineering & Met. & Mat. Engineering

Introduction to Modeling and Simulation

Dec. 9-13, 2013

10. Dr. S.H. Upadhyay Dr. S.P. Harsha Prof. Satish C. Sharma

Mech. & Ind. Engineering

Modelling and Simulation of Dynamical Systems

Dec. 30-Jan 03, 2014

11. Dr. Indra Vir Singh Dr. B.K. Mishra

Mech. & Ind. Engineering

Modeling and Simulations using Finite Element Methods

Jan. 7-11, 2014

12. Dr. Rajib Lochan Dhar Dr. Santosh Rangnekar

Management Studies

Strategic Human Resource Management (SHRM) for effective performance

Feb. 3-7, 2014

Application Form for Short Term Course (STC)

on “Thesis / Technical Writing”

Duration : 19.08.2013 to 23.08.2013

(You may get this form enlarged by Xeroxing on A4 Size paper or download

Application Form from website : www.iitr.ernet.in for submission of your application)

1. Name : Ms./Mr./Dr. (In Block Letters)

2. Designation :

3. Age (Years) :

4a. Residential address with pin code, telephone no., mobile Tel : Mobile :

4b. Complete official mailing address : (Including name of state and pin code number)

Email : Phone (Off.) Fax :

4c. Name of the Institute where employed :

4d. Name of the Department

5. Academic Qualification (degree onwards):

6. Specialization :

7. Teaching Experience in Years :

8. Subjects taught related to this STC 9. No. of STCs attended so far

At Roorkee .......... At other places ........ Total ..........

After Completion, Please Mail to : Dr. Rama Bhargava Coordinator Q.I.P. Centre, I.I.T. Roorkee ROORKEE – 247667 (Uttarakhand) Phone : (01332) 285241 & 284341 Fax : (01332) 286691, 273560 Email : [email protected]

Affix Passport Size Photograph

Page 5: INDUSTRIAL APPLICATIONS OF Organizing Department brochure 2013… · • Stochastic modeling of manufacturing systems • Queueing network and inventory models • Supply chain management

10. TA required (Please tick (√) the Appropriate box)

The participant will be paid TA up to 3rd

A.C. by shortest route subjected to production of travel documents.

Date : Signature of applicant Note : 1. This application form should reach QIP Office latest by 12.07.2013. 2. Application without the approved letter will not be

entertained. 3. Please note that 100% attendance is compulsory in

the course.

SPONSORSHIP CERTIFICATE The applicant will be permitted to participate in the above programme, if selected. Further, I have personally talked to the applicant and he/she seemed to be sure to attend the course, in case the admission is offered to him/her. This is to certify that this institute is recognized by AICTE.

Date : Signature

Sponsoring Authority (Principal / Director)

SEAL

Objectives of the Course • To introduce the need for novel machining and finishing

processes • To introduce the challenges in machining and finishing of

novel materials • To discuss various advanced machining and finishing

processes • To acquaint the participants with tools used in research

for Design of Experiments • To expose the participants to the modeling of machining

processes using FEM • To discuss various methods of surface quality

measurement • To encourage and motivate the participants to pursue

research in the field of advanced machining and finishing

Course Contents • Challenges in machining and finishing processes • Key issues in machining and finishing of novel materials • Advanced machining and finishing Processes • Material removal processes: Hybrid variants of different

newer machining processes including – ultrasonic machining, electric discharge based machining, electrochemical machining and laser beam machining

• Finishing Processes: Abrasive flow machining and its hybrid variants, electrochemical honing, other hybrid finishing processes.

• Tools for Design of Experiments • Modeling of machining processes using FEM • Surface quality assessment • Research potential in the field of advanced machining

and finishing • Laboratory demonstration, Field visit • Group Discussion.

Course Coordinator(s): Dr. Akshay Dvivedi, Assistant Professor

Phone - +91-1332-285428 (O), 9411176136 (M) Email: [email protected]

Dr. Apurbba Kumar Sharma, Associate Professor, Phone - +91-1332-285421 (O), 9411100286 (M) Email: [email protected]

Dr. Inderdeep Singh, Associate Professor, Phone - +91-1332-285177 (O), 9897689021 (M) Email: [email protected]

Department of Mechanical and Industrial Engineering, Indian Institute of Technology Roorkee

AICTE SPONSORED SHORT TERM COURSE

FINISH MACHINING: A STATE-OF-THE-ART

Organizing Department

Mechanical and Industrial Engineering Indian Institute of Technology Roorkee

Roorkee – 247667

02.09.2013 to 06.09.2013

QUALITY IMPROVEMENT PROGRAMME CENTRE INDIAN INSTITUTE OF TECHNOLOGY ROORKEE

ROORKEE - 247 667 (Uttarakhand) Phone : (01332) 285241, 284341 Fax : (01332) 286691, 273560 Email : [email protected] [email protected]

Yes No

Page 6: INDUSTRIAL APPLICATIONS OF Organizing Department brochure 2013… · • Stochastic modeling of manufacturing systems • Queueing network and inventory models • Supply chain management

General Information Indian Institute of Technology Roorkee, Roorkee is organizing a course on “Finish Machining: A state-of-the-art” from 02.09.2013 to 06.09.2013. The course is open to teachers from AICTE recognized engineering colleges approved by AICTE. Only limited seats are available in this course. Merit and availability of funds will be taken into consideration while selecting candidates. The application on the enclosed form duly signed by the sponsoring authority, should reach QIP Office latest by

12.07.2013. The candidate will be informed of his selection in advance.

Candidates admitted will be provided free lodging and boarding. The boarding and lodging arrangement for all the participants is made in Trainee Officer’s Hostel / IIT Guest House on twin sharing basis. Those participants not availing this facility will not be entitled to any rebate. Family accommodation is not available on campus. However, one may make his/her own arrangement in city hotels at his/her own expense. While boarding and lodging is given free, admission is also given to participants who will bear TA on their own or charge the same to their respective institutes. If so, please mention the same in the application form. Applications on attached form with due sponsorship should be sent at the address given below. In case, sponsorship is likely to take time, one can send an advance photo copy so as to reach before the due date by fax or speed post. However, no candidate will be admitted without due sponsorship.

About Roorkee

Roorkee is located at the foothills of Himalayas in the Uttarakhand State. The Railway Station is on the main line of Northern Railways having direct links to Delhi, Mumbai, Calcutta, Amritsar, Jodhpur and Ganganagar. The place is also within easy reach from Delhi, by road (180 km) and is located on Delhi - Haridwar and Delhi - Dehradun bus routes. Roorkee is ideally located near several tourist places like Dehradun (70 km), Mussoorie (100 km), Hardwar (32 km) and Rishikesh (52 km).

List of Additional Short Term Courses during 2013-2014

Sl.

No. Name of Course Coordinator

Department Course Title Duration

1. Dr. Pradeep Kumar

Mech. & Ind. Engineering

Quality Management: Issues, Tools and Techniques

Postponed

2. Dr. Madhu Jain

Mathematics Industrial Applications of Stochastic Modeling and Optimization

Aug. 12-16, 2013

3. Dr. M.K. Barua Dr. Usha Lenka

Management Studies

Thesis/Technical writing”

Aug.19-23, 2013

4. Dr. Akshay Dvivedi Dr. A.K. Sharma Dr. Inderdeep Singh

Mech. & Ind. Engineering

Finish Machining: A State-of-the-Art

Sept. 2-6, 2013

5. Dr. Zilur Rahman Dr. Vinay Sharma Dr. Rajat Agrawal

Management Studies

Case Based Learning in Business & Management

Oct. 7-11, 2013

6. Dr. Pramod Agarwal Dr. Mukesh Kumar Pathak

Electrical Engineering

Mutli Level Inverter and Its Applications

Oct.28 -Nov. 01, 2013

7. Dr. Gaurav Raheja Prof. M. Parida

Arch. & Planning & Civil Engineering

Planning Strategies for Accessibility and Universal Design

Nov. 11-15, 2013

8. Dr. K.L. Yadav Dr. Partha Roy

Physics & Biotechnology

Recent Advances in Biomaterials and Nanobiotechnology

Dec. 2-06, 2013

9. Dr. Rajib Chowdhury Dr. R. Jayaganthan

Civil Engineering & Met. & Mat. Engineering

Introduction to Modeling and Simulation

Dec. 9-13, 2013

10. Dr. S.H. Upadhyay Dr. S.P. Harsha Prof. Satish C. Sharma

Mech. & Ind. Engineering

Modelling and Simulation of Dynamical Systems

Dec. 30-Jan 03, 2014

11. Dr. Indra Vir Singh Dr. B.K. Mishra

Mech. & Ind. Engineering

Modeling and Simulations using Finite Element Methods

Jan. 7-11, 2014

12. Dr. Rajib Lochan Dhar Dr. Santosh Rangnekar

Management Studies

Strategic Human Resource Management (SHRM) for effective performance

Feb. 3-7, 2014

Application Form for

Short Term Course (STC) on

FINISH MACHINING: A STATE-OF-THE-ART

Duration : 02.09.2013 to 06.09.2013

(You may get this form enlarged by Photocopying on A4 Size paper, or download the Application Form from website : www.iitr.ernet.in)

1. Name : Ms./Mr./Dr. (In Block Letters)

2. Designation :

3. Age (Years) :

4a. Residential address with pin code, telephone no., mobile Tel : Mobile :

4b. Complete official mailing address : (Including name of state and pin code number)

Email : Phone (Off.) Fax :

4c. Name of the Institute where employed :

4d. Name of the Department

5. Academic Qualification (degree onwards):

6. Specialization :

7. Teaching Experience in Years :

8. Subjects taught related to this STC 9. No. of STCs attended so far

At Roorkee .......... At other places ........ Total ..........

After Completion, Please Mail to : Dr. Rama Bhargava Coordinator Q.I.P. Centre, I.I.T. Roorkee ROORKEE – 247667 (Uttarakhand) Phone : (01332) 285241, 284341 Fax : (01332) 273560 Email : [email protected]

Affix Passport Size Photograph

Page 7: INDUSTRIAL APPLICATIONS OF Organizing Department brochure 2013… · • Stochastic modeling of manufacturing systems • Queueing network and inventory models • Supply chain management

9. Probability of your (a) (b) Attending the course, If admitted. (Please tick (√) the (c) (d) Appropriate box) 10. TA required (Please tick (√) the Appropriate box)

The participant will be paid TA up to 3rd

A.C. by shortest route subjected to production of travel documents.

Date : Signature of applicant Note : 1. This application form should reach QIP Office latest by 30.08.2013. 2. Please do not come to Roorkee to attend the

course unless you have received admission letter or intimation from us for the same. No applicant will be admitted to the course on the spot.

3. Please note that in the course 100% attendance is

compulsory. 4. Application without the approved letter will not be

entertained for the course.

SPONSORSHIP CERTIFICATE The applicant will be permitted to participate in the above programme, if selected. Further, I have personally talked to the applicant and he/she seemed to be sure to attend the course, in case the admission is offered to him/her. This is to certify that this institute is recognized by AICTE.

Date : Signature

Sponsoring Authority (Principal / Director)

SEAL

Objectives of the Course The course aims to equip teachers of management schools with the power of case based learning. The course w3ill discuss multidisciplinary cases and will help teachers to explore different perspectives of same cases. The course will also illustrate writing skills for cases. The course will cover detailed analyses, presentation skills for cases ranging from General Management, Strategic Management, Marketing Management, Business environment, Knowledge Management, HRM and Operations Management.

Course Contents

• Importance of case based learning • Linkage of case based learning and theoretical

understanding • Case presentation and Analysis methodology • Case presentation, analysis and discussions in

following areas with the help of interdisciplinary cases (i) Strategic Management (ii) Business Environment (iii) Marketing Management (iv) Knowledge Management (v) Human Resource Management (vi) Operations / Supply Chain Management

• Case Writing Exercises

Course Coordinators: Dr. Z. Rahman Dr. Vinay Sharma Dr. Rajat Agrawal

Email: [email protected], [email protected],

[email protected] Ph.: 01332 – 285081, 285175, 285737

AICTE SPONSORED

SHORT TERM COURSE

Case Based Learning in Business & Management

Organizing Department

Management Studies Indian Institute of Technology

Roorkee

07.10.2013 to 11.10.2013

QUALITY IMPROVEMENT PROGRAMME CENTRE INDIAN INSTITUTE OF TECHNOLOGY

ROORKEE - 247 667 (Uttarakhand) Phone : (01332) 285241 & 284341 Fax : 01332 – 286691, 273560 Email : [email protected]

100% 90-100%

80-90% 70-80%

Yes No

Page 8: INDUSTRIAL APPLICATIONS OF Organizing Department brochure 2013… · • Stochastic modeling of manufacturing systems • Queueing network and inventory models • Supply chain management

General Information Indian Institute of Technology, Roorkee is organizing a course on “Case Based Learning in Business & Management” from 07.10.13 to 11.10.13. The course is open to teachers from AICTE recognized management and engineering colleges approved by AICTE. Only limited seats are available in this course. Merit and availability of funds will be taken into consideration while selecting candidates. The application on the enclosed form duly signed by the sponsoring authority, should reach QIP Office latest by 30.08.2013. The candidate will be informed of his selection in advance. Candidates admitted will be provided free lodging and boarding. The boarding and lodging arrangement for all the participants is made in Trainee Officer’s Hostel / IIT Guest House on twin sharing basis. Those participants not availing this facility will not be entitled to any rebate. Family accommodation is not available on campus. However, one may make his/her own arrangement in city hotels at his/her own expense. While boarding and lodging is given free, admission is also given to participants who will bear TA on their own or charge the same to their respective institutes. If so, please mention the same in the application form. Applications on attached form with due sponsorship should be sent at the address given below. In case, sponsorship is likely to take time, one can send an advance photo copy so as to reach before the due date by fax or speed post. However, no candidate will be admitted without due sponsorship.

About Roorkee

Roorkee is located at the foothills of Himalayas in the Uttarakhand State. The Railway Station is on the main line of Northern Railways having direct links to Delhi, Mumbai, Calcutta, Amritsar, Jodhpur and Ganganagar. The place is also within easy reach from Delhi, by road (180 km) and is located on Delhi - Haridwar and Delhi - Dehradun bus routes. Roorkee is ideally located near several tourist places like Dehradun (70 km), Mussoorie (100 km), Hardwar (32 km) and Rishikesh (52 km).

List of Additional Short Term Courses during 2013-2014

Sl. No.

Name of Course Coordinator

Department Course Title Duration

1. Dr. Pradeep Kumar

Mech. & Ind. Engineering

Quality Management: Issues, Tools and Techniques

Postponed

2. Dr. Madhu Jain

Mathematics Industrial Applications of Stochastic Modeling and Optimization

Aug. 12-16, 2013

3. Dr. M.K. Barua Dr. Usha Lenka

Management Studies

Thesis/Technical writing”

Aug.19-23, 2013

4. Dr. Akshay Dvivedi Dr. A.K. Sharma Dr. Inderdeep Singh

Mech. & Ind. Engineering

Finish Machining: A State-of-the-Art

Sept. 2-6, 2013

5. Dr. Zilur Rahman Dr. Vinay Sharma Dr. Rajat Agrawal

Management Studies

Case Based Learning in Business & Management

Oct. 7-11, 2013

6. Dr. Pramod Agarwal Dr. Mukesh Kumar Pathak

Electrical Engineering

Mutli Level Inverter and Its Applications

Oct.28 -Nov. 01, 2013

7. Dr. Gaurav Raheja Prof. M. Parida

Arch. & Planning & Civil Engineering

Planning Strategies for Accessibility and Universal Design

Nov. 11-15, 2013

8. Dr. K.L. Yadav Dr. Partha Roy

Physics & Biotechnology

Recent Advances in Biomaterials and Nanobiotechnology

Dec. 2-06, 2013

9. Dr. Rajib Chowdhury Dr. R. Jayaganthan

Civil Engineering & Met. & Mat. Engineering

Introduction to Modeling and Simulation

Dec. 9-13, 2013

10. Dr. S.H. Upadhyay Dr. S.P. Harsha Prof. Satish C. Sharma

Mech. & Ind. Engineering

Modelling and Simulation of Dynamical Systems

Dec. 30-Jan 03, 2014

11. Dr. Indra Vir Singh Dr. B.K. Mishra

Mech. & Ind. Engineering

Modeling and Simulations using Finite Element Methods

Jan. 7-11, 2014

12. Dr. Rajib Lochan Dhar Dr. Santosh Rangnekar

Management Studies

Strategic Human Resource Management (SHRM) for effective performance

Feb. 3-7, 2014

Application Form for Short Term Course (STC)

on “Case Based Learning in Business &

Management” Duration : 7.10.2013 to 11.10.2013

(You may get this form enlarged by Xeroxing on A4 Size paper or download Application Form from website : www.iitr.ernet.in for

submission of your application)

1. Name : Ms./Mr./Dr. (In Block Letters)

2. Designation :

3. Age (Years) :

4a. Residential address with pin code, telephone no., mobile

Tel : Mobile :

4b. Complete official mailing address : (Including name of state and pin code number)

Email : Phone (Off.) Fax :

4c. Name of the Institute where employed :

4d. Name of the Department

5. Academic Qualification (degree on wards):

6. Specialization :

7. Teaching Experience in Years : 8. Subjects taught related to this STC

9. No. of STCs Attended so far

At Roorkee .......... At other places ........ Total ..........

After Completion, Please Mail to : Dr. Rama Bhargava Coordinator Q.I.P. Centre, I.I.T. Roorkee ROORKEE – 247667 (Uttarakhand) Phone : (01332) 285241 & 284341 Fax : (01332) 273560 Email : [email protected]

Affix Passport Size Photograph

Page 9: INDUSTRIAL APPLICATIONS OF Organizing Department brochure 2013… · • Stochastic modeling of manufacturing systems • Queueing network and inventory models • Supply chain management

10. TA required (Please tick (√) the Appropriate box)

The participant will be paid TA up to 3rd

A.C. by shortest route subjected to production of travel documents.

Date : Signature of applicant Note : 1. This application form should reach QIP Office latest by 30.08.2013. 2. Application without the approved letter will not be

entertained. 3. Please note that 100% attendance is compulsory in

the course.

SPONSORSHIP CERTIFICATE The applicant will be permitted to participate in the above programme, if selected. Further, I have personally talked to the applicant and he/she seemed to be sure to attend the course, in case the admission is offered to him/her. This is to certify that this institute is recognized by AICTE.

Date : Signature

Sponsoring Authority (Principal / Director)

SEAL

Objectives of the Course Power electronic converters are now employed in almost every industrial as well as domestic application ranging from few watts to several megawatts. Pulse width modulated (PWM) inverters are now integral part of applications such as adjustable speed drive system, traction system, high voltage DC (HVDC) system, active power filters etc. Generally, two-level inverters used in high power and high voltage applications, suffer from the drawback of generating large common mode voltages, more switching losses etc.

Multilevel inverters (MLI) have emerged as a viable alternative over the conventional two-level inverters in high voltage, high power applications due to reduced voltage stress across the power switches, low dv/dt stress, low EMI emissions and better harmonic spectrum of output voltage and current. During the last two decades, MLI has been researched, developed and implemented in high voltage and high power applications. With the development and advances in switching speed and capacity of the power semiconductor devices, various topologies of MLI are developed.

The aim of the proposed course is to discuss the various topologies of Multilevel Inverters. Different control schemes such as Sinusoidal PWM and Space Vector PWM techniques will be dealt to improve performance of the MLI.

Course Contents

a. An overview of Multi Level Inverter - 1

b. Three-Phase Two Level Inverter - 1

c. PWM Techniques for Two-Level Inverter - 2

d. Space Vector Modulation in Two-Level Inverter - 2

e. Multilevel Inverter Topologies - 3

f. PWM Techniques for Multilevel Inverter - 2

g. Space Vector Modulation in Multilevel Inverter - 1

h. Multilevel inverter based Active Power Filter - 2

i. Multilevel Inverter for AC Motor Drive - 2

j. Multi-level converters - 2

Few laboratory demonstrations/simulations will be organized during course.

Course Coordinator(s): Dr. Pramaod Agarwal, Professor Ph: 01332-285069 (O), 01332-274104 (R) Email: [email protected]

Dr. Mukesh Kumar Pathak, Associate Professor Ph: 01332-285220 (O), 01332-285320(R) Email: [email protected] Department of Electrical Engineering, Indian Institute of Technology Roorkee

AICTE SPONSORED SHORT TERM COURSE

Multi Level Inverter and Its Applications

Organizing Department

Electrical Engineering Indian Institute of Technology Roorkee

Roorkee – 247667

28.10.2013 to 01.11.2013

QUALITY IMPROVEMENT PROGRAMME CENTRE INDIAN INSTITUTE OF TECHNOLOGY ROORKEE

ROORKEE - 247 667 (Uttarakhand) Phone : (01332) 285241, 284341 Fax : (01332) 286691, 273560 Email : [email protected] [email protected]

Yes No

Page 10: INDUSTRIAL APPLICATIONS OF Organizing Department brochure 2013… · • Stochastic modeling of manufacturing systems • Queueing network and inventory models • Supply chain management

General Information Indian Institute of Technology Roorkee, Roorkee is organizing a course on “Multi Level Inverter and Its Applications” from 28.10.2013 to 01.11.2013. The course is open to teachers from AICTE recognized engineering colleges approved by AICTE. Only limited seats are available in this course. Merit and availability of funds will be taken into consideration while selecting candidates. The application on the enclosed form duly signed by the sponsoring authority, should reach QIP Office latest by

30.08.2013. The candidate will be informed of his selection in advance.

Candidates admitted will be provided free lodging and boarding. The boarding and lodging arrangement for all the participants is made in Trainee Officer’s Hostel / IIT Guest House on twin sharing basis. Those participants not availing this facility will not be entitled to any rebate. Family accommodation is not available on campus. However, one may make his/her own arrangement in city hotels at his/her own expense. While boarding and lodging is given free, admission is also given to participants who will bear TA on their own or charge the same to their respective institutes. If so, please mention the same in the application form. Applications on attached form with due sponsorship should be sent at the address given below. In case, sponsorship is likely to take time, one can send an advance photo copy so as to reach before the due date by fax or speed post. However, no candidate will be admitted without due sponsorship.

About Roorkee

Roorkee is located at the foothills of Himalayas in the Uttarakhand State. The Railway Station is on the main line of Northern Railways having direct links to Delhi, Mumbai, Calcutta, Amritsar, Jodhpur and Ganganagar. The place is also within easy reach from Delhi, by road (180 km) and is located on Delhi - Haridwar and Delhi - Dehradun bus routes. Roorkee is ideally located near several tourist places like Dehradun (70 km), Mussoorie (100 km), Hardwar (32 km) and Rishikesh (52 km).

List of Additional Short Term Courses during 2013-2014

Sl. No.

Name of Course Coordinator

Department Course Title Duration

1. Dr. Pradeep Kumar

Mech. & Ind. Engineering

Quality Management: Issues, Tools and Techniques

Postponed

2. Dr. Madhu Jain

Mathematics Industrial Applications of Stochastic Modeling and Optimization

Aug. 12-16, 2013

3. Dr. M.K. Barua Dr. Usha Lenka

Management Studies

Thesis/Technical writing”

Aug.19-23, 2013

4. Dr. Akshay Dvivedi Dr. A.K. Sharma Dr. Inderdeep Singh

Mech. & Ind. Engineering

Finish Machining: A State-of-the-Art

Sept. 2-6, 2013

5. Dr. Zilur Rahman Dr. Vinay Sharma Dr. Rajat Agrawal

Management Studies

Case Based Learning in Business & Management

Oct. 7-11, 2013

6. Dr. Pramod Agarwal Dr. Mukesh Kumar Pathak

Electrical Engineering

Mutli Level Inverter and Its Applications

Oct.28 -Nov. 01, 2013

7. Dr. Gaurav Raheja Prof. M. Parida

Arch. & Planning & Civil Engineering

Planning Strategies for Accessibility and Universal Design

Nov. 11-15, 2013

8. Dr. K.L. Yadav Dr. Partha Roy

Physics & Biotechnology

Recent Advances in Biomaterials and Nanobiotechnology

Dec. 2-06, 2013

9. Dr. Rajib Chowdhury Dr. R. Jayaganthan

Civil Engineering & Met. & Mat. Engineering

Introduction to Modeling and Simulation

Dec. 9-13, 2013

10. Dr. S.H. Upadhyay Dr. S.P. Harsha Prof. Satish C. Sharma

Mech. & Ind. Engineering

Modelling and Simulation of Dynamical Systems

Dec. 30-Jan 03, 2014

11. Dr. Indra Vir Singh Dr. B.K. Mishra

Mech. & Ind. Engineering

Modeling and Simulations using Finite Element Methods

Jan. 7-11, 2014

12. Dr. Rajib Lochan Dhar Dr. Santosh Rangnekar

Management Studies

Strategic Human Resource Management (SHRM) for effective performance

Feb. 3-7, 2014

Application Form for Short Term Course (STC)

on

Multi Level Inverter and Its Applications

Duration : 28.10.2013 to 01.11.2013

(You may get this form enlarged by Photocopying on A4 Size paper, or download the Application Form from website : www.iitr.ernet.in)

1. Name : Ms./Mr./Dr. (In Block Letters)

2. Designation :

3. Age (Years) :

4a. Residential address with pin code, telephone no., mobile Tel : Mobile :

4b. Complete official mailing address : (Including name of state and pin code number)

Email : Phone (Off.) Fax :

4c. Name of the Institute where employed :

4d. Name of the Department

5. Academic Qualification (degree onwards):

6. Specialization :

7. Teaching Experience in Years :

8. Subjects taught related to this STC 9. No. of STCs attended so far

At Roorkee .......... At other places ........ Total ..........

After Completion, Please Mail to : Dr. Rama Bhargava Coordinator Q.I.P. Centre, I.I.T. Roorkee ROORKEE – 247667 (Uttarakhand) Phone : (01332) 285241, 284341 Fax : (01332) 273560 Email : [email protected]

Affix Passport Size Photograph

Page 11: INDUSTRIAL APPLICATIONS OF Organizing Department brochure 2013… · • Stochastic modeling of manufacturing systems • Queueing network and inventory models • Supply chain management

10. TA required (Please tick (√) the Appropriate box)

The participant will be paid TA up to 3rd

A.C. by shortest route subjected to production of travel documents.

Date : Signature of applicant Note : 1. This application form should reach QIP Office latest by 16.09.2013. 2. Application without the approved letter will not be

entertained for the course 3. Please note that 100% attendance is compulsory in the

course.

SPONSORSHIP CERTIFICATE The applicant will be permitted to participate in the above programme, if selected. Further, I have personally talked to the applicant and he/she seemed to be sure to attend the course, in case the admission is offered to him/her. This is to certify that this institute is recognized by AICTE.

Date : Signature

Sponsoring Authority (Principal / Director)

SEAL

Objectives of the Course

Universal Design is a concept that advocates and supports an applied intention of coexistence and inclusion for all. As a user ourselves, how many times did we experience exclusion through built environment and transport system designs? And at what times did we feel comforted by space especially when we were physically weak, impaired or had a permanent disability? This course makes a sincere effort in extending these questions into a rational knowledge base, which is mandated by the laws of Govt. of India and the United Nations towards inclusion. Based upon an intense research and professional experience in the field of accessibility design, this course is backed by strong theoretical foundations supported by practical field based illustrations to create accessible built environments for public use along with supporting transport infrastructure.

Course Contents • Sensitization to Diverse User Needs including

Persons with disabilities • Accessibility Design Standards • Conducting Access Audit(s) • Barrier Free Urban Public Transportation • Research Methodologies for Accessible

Transportation • Universal Design : from Theory to Application • Enabling Environments in Rural Context • Improving Access through Technology • Persons with Disabilities Act, India : A Legislative

perspective • Universal Design Research and Best Practices • Field visit for Access Audit(s)

Course Coordinator(s):

Dr. Gaurav Raheja Assistant Professor, Department of Architecture & Planning Indian Institute of Technology Roorkee Roorkee – 247 667 (U.K), India Email: [email protected] Ph.: 01332 – 285709, +91 - 94120 25455

Dr. M.Parida Professor Department of Civil Engineering & Head, Centre for Transportation Systems (CTRANS) Indian Institute of Technology Roorkee Roorkee – 247 667 (U.K), India Email: [email protected] Ph.: 01332 – 285448, +91 - 98374 23963

AICTE SPONSORED

SHORT TERM COURSE

PLANNING STRATEGIES FOR ACCESSIBILITY &

UNIVERSAL DESIGN

Organizing Department

Architecture & Planning &

Civil Engineering, CTRANS Indian Institute of Technology Roorkee

ROORKEE – 247 667

11.11.2013 to 15.11.2013

QUALITY IMPROVEMENT PROGRAMME CENTRE INDIAN INSTITUTE OF TECHNOLOGY

ROORKEE - 247 667 (Uttarakhand) Phone : (01332) 285241, 284341 Fax : (01332) 286691, 273560 Email : [email protected], [email protected]

Yes No

Page 12: INDUSTRIAL APPLICATIONS OF Organizing Department brochure 2013… · • Stochastic modeling of manufacturing systems • Queueing network and inventory models • Supply chain management

General Information

Indian Institute of Technology, Roorkee is organizing a course on “Planning Strategies for Accessibility & Universal Design” from 11.11.2013 to 15.11.2013. The course is open to teachers from AICTE recognized architecture, engineering, design and management colleges. Only limited seats are available in this course. Merit and availability of funds will be taken into consideration while selecting candidates. The application on the enclosed form duly signed by the sponsoring authority, should reach QIP Office latest by 16.09.2013. The candidate will be informed of his/her selection in advance.

Candidates admitted will be provided free lodging and boarding. The boarding and lodging arrangement for all the participants is made in Trainee Officer’s Hostel (CEC Guest House) / Khosla International House on twin sharing basis. Those participants not availing this facility will not be entitled to any rebate. Family accommodation is not available on campus. However, one may make his/her own arrangement in city hotels at his/her own expense. While boarding and lodging is given free, priority in admission will be given to participants who will bear TA on their own or charge the same to their respective institutes. If so, please mention the same in the application form. Applications on attached form with due sponsorship should be sent at the address given below. In case, sponsorship is likely to take time, one can send an advance photo copy, so as to reach before the due date, by fax or speed post. However, no candidate will be admitted without due sponsorship.

About Roorkee

Roorkee is located at the foothills of Himalayas in the Uttarakhand State. The Railway Station is on the main line of Northern Railways having direct links to Delhi, Mumbai, Calcutta, Amritsar, Jodhpur and Ganganagar. The place is also within easy reach from Delhi by road (180 km) and is located on Delhi - Haridwar and Delhi - Dehradun bus routes. Roorkee is ideally located near several tourist places like Dehradun (70 km), Mussoorie (100 km), Haridwar (32 km) and Rishikesh (52 km).

List of Additional Short Term Courses during 2013-2014

Sl. No.

Name of Course Coordinator

Department Course Title Duration

1. Dr. Pradeep Kumar

Mech. & Ind. Engineering

Quality Management: Issues, Tools and Techniques

Postponed

2. Dr. Madhu Jain

Mathematics Industrial Applications of Stochastic Modeling and Optimization

Aug. 12-16, 2013

3. Dr. M.K. Barua Dr. Usha Lenka

Management Studies

Thesis/Technical writing”

Aug.19-23, 2013

4. Dr. Akshay Dvivedi Dr. A.K. Sharma Dr. Inderdeep Singh

Mech. & Ind. Engineering

Finish Machining: A State-of-the-Art

Sept. 2-6, 2013

5. Dr. Zilur Rahman Dr. Vinay Sharma Dr. Rajat Agrawal

Management Studies

Case Based Learning in Business & Management

Oct. 7-11, 2013

6. Dr. Pramod Agarwal Dr. Mukesh Kumar Pathak

Electrical Engineering

Mutli Level Inverter and Its Applications

Oct.28 -Nov. 01, 2013

7. Dr. Gaurav Raheja Prof. M. Parida

Arch. & Planning & Civil Engineering

Planning Strategies for Accessibility and Universal Design

Nov. 11-15, 2013

8. Dr. K.L. Yadav Dr. Partha Roy

Physics & Biotechnology

Recent Advances in Biomaterials and Nanobiotechnology

Dec. 2-06, 2013

9. Dr. Rajib Chowdhury Dr. R. Jayaganthan

Civil Engineering & Met. & Mat. Engineering

Introduction to Modeling and Simulation

Dec. 9-13, 2013

10. Dr. S.H. Upadhyay Dr. S.P. Harsha Prof. Satish C. Sharma

Mech. & Ind. Engineering

Modelling and Simulation of Dynamical Systems

Dec. 30-Jan 03, 2014

11. Dr. Indra Vir Singh Dr. B.K. Mishra

Mech. & Ind. Engineering

Modeling and Simulations using Finite Element Methods

Jan. 7-11, 2014

12. Dr. Rajib Lochan Dhar Dr. Santosh Rangnekar

Management Studies

Strategic Human Resource Management (SHRM) for effective performance

Feb. 3-7, 2014

Application Form for Short Term Course (STC)

on “Planning Strategies for Accessibility & Universal Design”

Duration: 11.11.2013 to 15.11.2013

(You may get this form enlarged by Xeroxing on A4 Size paper or download Application Form from website : www.iitr.ernet.in for submission of your

application)

1. Name : Ms./Mr./Dr. (In Block Letters)

2. Designation :

3. Age (Years) :

4a. Residential address with pin code, telephone no., mobile Tel : Mobile :

4b. Complete official mailing address : (Including name of state and pin code number)

Email : Phone (Off.) Fax :

4c. Name of the Institute where employed :

4d. Name of the Department

5. Academic Qualification (degree onwards):

6. Specialization :

7. Teaching Experience in Years :

8. Subjects taught related to this STC 9. No. of STCs attended so far

At Roorkee .......... At other places ........ Total ..........

After Completion, Please Mail to : Dr. Rama Bhargava Coordinator Q.I.P. Centre, I.I.T. Roorkee ROORKEE – 247667 (Uttarakhand) Phone : (01332) 285241 & 284341 Fax : (01332) 286691, 273560 Email : [email protected]

Affix Passport Size Photograph