Upload
adelina-cirstea
View
2.425
Download
13
Tags:
Embed Size (px)
DESCRIPTION
Efficiency, reliability, safety and ease of use are the basic factors for a careful selection of a professional product. On the ground of these standards, Lavor PRO has conceived professional line high-pressure cleaners, in order to match, through high-tech products, perfect hygiene and clean with time/labour saving.
Citation preview
Main catalogue
2012/13
3
www.lavorpro.com
Lavor is on lineoffering a website rich with information about the company and its products. The site is easy to explore thanks to a navigation system organised around simple and straightforward steps, with continually updated data.
www.lavorpro.comalso features a B2B service enabled by accessing a reserved area after registering your own personal password. Orders are simple to make and send, ensured by the speed with which it is possible to consult our products and thanks to our “shopping basket” feature. The site also includes a series of instant icons to review and check the status of your order as well as see past orders.
www.lavorpro.comconnecting to the LAVOR PRO world is just a click away: information, products and news at the fingertips of every navigator.
Lavor PRO online
4
CL5 series
built in aluminum alloy; double body for easy disassembly
up to 21 l/min.
TPBH5 series
MPW5 series
extreme duty use.
Pumps and motorpumps
CL3 series
TPBH3 series
High-pressure cleaners
5
.
MP3 series
range.
MPBX2 series
MP2 series
components.
MPW3 series
extreme duty use
MPBX1 series
High-pressure cleaners
6
Efficiency, reliability, safety and ease of use are the basic factors for a careful selection of a professional product. On the ground of these standards, Lavor PRO has conceived professional line high-pressure cleaners, in order to match, through high-tech products, perfect hygiene and clean with time/labour saving.
Being Manufacturers: from experience to knowledge
in those who buy components to assemble products and manufacturers, who have a continuous R&D on all product components.
components entirely and this allows: to spread product knowledge, culture and experience inside the company; to check the entire manufacturing cycle; to adopt possible
adjusting product range design in real time.
What high pressure cleaner? Is it better pressure or delivery rate?
performances is the washing effectiveness.
volume processed by the pump in a unity of time) and pressure l/h water power on a surface). The higher the delivery rate,
delivery rate is as important as pressure.
What pump? Is it better a linear (crankshaft) or an axial one?
axial) and of the components used; for this reason Lavorwash decided to develop both technologies, taking into consideration a design that grants margin of safety and reliability.
What design? Is it better horizontal or vertical construction?
of the structure.The vertical development is much more ergonomic for the user, because machine moving and storing after use are much easier, but these benefits raise manufacturing cost.The horizontal development allows an easier pump service if needed, better stability and a lower manufacturing cost.
Cold water high-pressure cleaner
7
the rotation of an inclined wobble plate
are few moving elements.
a system of connecting rods and crankshaft. The
same level or linear) is perpendicular to the motor rotation axle.
and it has a better self priming.
motor, this allows a better thermal exchange
a drop in operating temperature of the motor and pump mechanical elements, granting a better reliability and longer life.
completely mechanical system, the thermal valve checks the
Releasing the gun trigger the pump stops
of the motor/pump group whenever the gun
seconds the machine shut down. Prevention, energy saving, top safety and pump longer life.
The electric motor transfers the same number of
supplied at the same operating pressure of the
areas far from the user.
supplied lowering the operating pressure of the
on areas near to the user.
is not necessary to have other external tanks that reduce movements.
The machine has two integrated detergent tanks, to supply two different chemical products with a
to have other external tanks that reduce movements.
The release of the gun trigger produces a strong counterstroke in the pump. This device amortizes this power with great benefit for the
pump components and for the user, because it removes all the vibrations.
is applied to lower the rotation of the connected pump. Low rotation speed of the components grant longer pump life.
operating pressure.
and for water saving.
Cold water high-pressure cleaner
8
Cold water high-pressure cleaner
Reno California LP Arizona LPOregon XPPartner LP LMX XP Garage LP Danubio LP Michigan LP Columbia LP
Page
Opera
ting p
ressu
re (m
ax pr
essu
re)
Opera
ting p
ressu
re (m
ax pr
essu
re)
Deliv
ery ra
te
Deliv
ery ra
te
Abso
rbed p
ower
RPM
Volta
ge
Max i
nlet w
ater
tempe
rature
Weigh
t with
pa
ckag
ing
Pack
aging
Piece
s for
palle
t
Code Model bar (max bar) psi (max psi) l/h GPM W RPM V - Hz °C Kg/lbs cm n°(cm x cm)
8.658.0003 RENO 1315 XP 10 130 (145) 1885(2102) 480÷900 2.1÷3.96 2600 2800 230 - 50 40 25/55 39x39 h 71 18(120-80)
8.664.0001C PARTNER 1210 LP 11 110 (130) 1595(1885) 345÷600 1.52÷2.64 2200 2800 230 - 50 40 14/31 47x32 h 27 49(120-100)
8.666.0001 CALIFORNIA 1109 LP 12 110 (140) 1595(2030) 345÷540 1.52÷2.38 2300 2800 230 - 50 40 29/64 60x38 h 72 12(120-80)
8.663.0001 OREGON 1509 XP 13 150 (190) 2175(2755) 345÷540 1.52÷2.38 2800 2800 230 - 50 40 29/64 34X38 h 100 18(120-80)
8.613.0001 LMX 1211 XP 14 50÷120 (150) 725÷1740(2175) 345÷660 1.52÷2.91 3300 2800 230 - 50 40 32/70 60x37,5 h 74 12(120x80)
8.613.0023 LMX 1509 XP 14 50÷150 (170) 725÷1740(2465) 345÷540 1.52÷2.38 3300 2800 230 - 50 40 32/70 60x37,5 h 74 12(120x80)
8.613.0015 LMX 2007 XP 14 50÷200 (220) 725÷2900(3190) 345÷420 1.52÷1.85 3300 2800 230 - 50 40 32/70 60x37,5 h 74 12(120x80)8.613.0028 LMX 1713 XP 14 50÷170 725÷2900 345÷780 1.52÷3.43 4700 2800 400 - 50 40 32/70 60x37,5 h 74 12(120x80)8.613.0003 LMX 2011 XP 14 50÷200 725÷2900 345÷660 1.52÷2.91 4700 2800 400 - 50 40 32/70 60x37,5 h 74 12(120x80)
8.665.0001 ARIZONA 1209 15 120 (150) 1740(2175) 345÷510 1.52÷2.23 2300 1450 230 - 50 40 24/53 60x38 h 72 12(120-80)
8.662.0001 GARAGE 1211 LP 16 30÷120(150) 435÷1740(2175) 345÷660 1.52÷2.91 3000 1450 230 - 50 40 30/66 60x40 h 40 20(120x80)
8.662.0002 GARAGE 1612 LP 16 30÷160 435÷2320 345÷720 1.52÷3.17 4000 1450 400 - 50 40 31/69 60x40 h 40 20(120x80)
8.659.0001 DANUBIO 1211 LP 17 30÷120(150) 435÷1740(2175) 345÷660 1.52÷2.91 3000 1450 230 - 50 40 36/79 75x40 h 62 9(120x80)
8.659.0009 DANUBIO 1510 LP 17 30÷150(160) 435÷2175(2320) 345÷540 1.52÷2.38 3000 1450 230 - 50 40 36/79 75x40 h 62 9(120x80)
8.659.0003 DANUBIO 1612 LP 18 30÷160 435÷2320 345÷720 1.52÷3.17 4000 1450 400 - 50 40 36/79 75x40 h 62 9(120x80)
8.659.0012 DANUBIO 1515 LP 18 30÷150 435÷2175 450÷900 1.98÷3.96 5000 1450 400 - 50 40 46/101 75x40 h 62 9(120x80)
8.659.0013 DANUBIO 2015 LP 18 30÷200 435÷2900 450÷900 1.98÷3.96 7000 1450 400 - 50 40 47/103 75x40 h 62 9(120x80)
8.657.0606 MICHIGAN 1211 LP 19 30÷125(150) 435÷1812(2175) 320÷660 1.41÷2.91 3000 1450 230 - 50 40 51/112 50x60 h 107 1 (120x80)
8.657.0619 MICHIGAN 1211 LP (*) 19 30÷125(150) 435÷1812(2175) 320÷660 1.41÷2.91 3000 1450 230 - 50 40 51/112 50x60 h 107 1 (120x80)
8.657.0601 MICHIGAN 1515 LP RA 19 30÷150 435÷2175 450÷900 1.98÷3.96 5000 1450 400 - 50 40 53/117 50x60 h 107 1 (120x80)
8.657.0609 MICHIGAN 1515 LP RA (*) 19 30÷150 435÷2175 450÷900 1.98÷3.96 5000 1450 400 - 50 40 53/117 50x60 h 107 1 (120x80)
8.657.0602 MICHIGAN 2015 LP RA 19 30÷200 435÷2900 450÷900 1.98÷3.96 7000 1450 400 - 50 40 55/121 50x60 h 107 1 (120x80)
8.657.0610 MICHIGAN 2015 LP RA (*) 19 30÷200 435÷2900 450÷900 1.98÷3.96 7000 1450 400 - 50 40 55/121 50x60 h 107 1 (120x80)
8.657.0603 MICHIGAN 2021 LP RA 19 30÷200 435÷2900 630÷1260 2.77÷5.55 9400 1450 400 - 50 40 75/165 50x60 h 107 1 (120x80)
8.657.0611 MICHIGAN 2021 LP RA (*) 19 30÷200 435÷2900 630÷1260 2.77÷5.55 9400 1450 400 - 50 40 75/165 50x60 h 107 1 (120x80)
8.657.0630 MICHIGAN 2515 LP RA 19 30÷250 435÷3600 450÷900 1.52÷3.96 8500 1450 400 - 50 40 75/165 50x60 h 107 1 (120x80)
8.657.0631 MICHIGAN 2515 LP RA (*) 19 30÷250 435÷3600 450÷900 1.52÷3.96 8500 1450 400 - 50 40 75/165 50x60 h 107 1 (120x80)
8.654.0001 COLUMBIA 1211 LP 20 30÷125(150) 435÷1812(2175) 345÷660 1.52÷2.91 3000 1450 230 - 50 40 47/103 55x62 h 58 12 (120x100)
8.654.0002 COLUMBIA 1515 LP RA 20 30÷150 435÷2175 345÷900 1.52÷3.96 5000 1450 400 - 50 40 47/103 55x62 h 58 12 (120x100)
8.654.0003 COLUMBIA 2015 LP RA 20 30÷200 435÷2900 450÷900 1.98÷3.96 7000 1450 400 - 50 40 50/110 55x62 h 58 12 (120x100)
8.654.0015 COLUMBIA 2021 LP RA 20 30÷200 435÷2900 630÷1260 2.77÷5.55 9400 1450 400 - 50 40 55/121 55x62 h 58 12 (120x100)
8.654.0034 HYPER C 1211 LP 22 30÷125 435÷1812 345÷660 1.52÷2.91 3000 1450 230 - 50 40 44/97 50x90 h 83 12 (120x100)
8.654.0033 HYPER C 1515 LP RA 22 30÷150 435÷2175 450÷900 1.98÷3.96 5000 1450 400 - 50 40 44/97 50x90 h 83 12 (120x100)
8.654.0023 HYPER C 2015 LP RA 22 30÷200 435÷2900 450÷900 1.98÷3.96 7000 1450 400 - 50 40 48/106 50x90 h 83 12 (120x100)
8.654.0031 HYPER C 2021 LP RA 22 30÷200 435÷2900 630÷1260 2.77÷5.55 9400 1450 400 - 50 40 53/117 50x90 h 83 12 (120x100)
8.654.0053 HYPER C 2515 LP RA 22 30÷250 435÷3600 450÷900 1.52÷3.96 8500 1450 400 - 50 40 53/117 50x90 h 83 12 (120-100)
8.626.0001 MCHPV 1211 LP 21 30÷120(150) 435÷1740(2175) 345÷660 1.52÷2.91 3000 1450 230 - 50 40 40/88 75x50 h 35 9(120x80)
8.626.0002 MCHPV 1515 LP RA 21 30÷150 435÷2175 345÷900 1.52÷3.96 5000 1450 400 - 50 40 45/99 75x50 h 35 9(120x80)
8.626.0003 MCHPV 2015 LP RA 21 30÷200 435÷2900 450÷900 1.98÷3.96 7000 1450 400 - 50 40 50/110 75x50 h 35 9(120x80)
NEW
NEW NEW NEW
(*) with hose reel
9
Cold water high-pressure cleaner
MCHPV LP
NEW
Magnum LP Thermic 9Thermic 5H Thermic 13HThermic 11HThermic 10 DIndependent 2800
Page
Opera
ting p
ressu
re (m
ax pr
essu
re)
Opera
ting p
ressu
re (m
ax pr
essu
re)
Deliv
ery ra
te
Deliv
ery ra
te
Abso
rbed p
ower
RPM
Volta
ge
Max i
nlet w
ater
tempe
rature
Weigh
t with
pa
ckag
ing
Pack
aging
Piece
s for
palle
t
Code Model bar (max bar) psi (max psi) l/h GPM W RPM V - Hz °C Kg/lbs cm n°(cm x cm)
8.626.0004 MCHPV 2021 LP RA 21 30÷200 435÷2900 630÷1260 2.77÷5.55 9400 1450 400 - 50 40 55/121 75x50 h 35 9(120x80)
8.626.0005 MCHPX 1211 LP 21 30÷120(150) 435÷1740(2175) 345÷660 1.52÷2.91 3000 1450 230 - 50 40 40/88 75x50 h 35 9(120x80)
8.626.0006 MCHPX 1515 LP RA 21 30÷150 435÷2175 345÷900 1.52÷3.96 5000 1450 400 - 50 40 45/99 75x50 h 35 9(120x80)
8.626.0007 MCHPX 2015 LP RA 21 30÷200 435÷2900 450÷900 1.98÷3.96 7000 1450 400 - 50 40 50/110 75x50 h 35 9(120x80)
8.626.0008 MCHPX 2021 LP RA 21 30÷200 435÷2900 630÷1260 2.77÷5.55 9400 1450 400 - 50 40 55/121 75x50 h 35 9(120x80)
8.651.0002 MAGNUM 2030 LP 23 30÷200 435÷2900 900÷1800 3.96÷7.94 13000 1450 400 - 50 40 150/330 128x75 h 123 1 (120x80)
8.601.0107 THERMIC 5H 24 30÷160 435÷2320 285÷570 1.26÷2.51 5 hp 3000 - 40 30/66 59x49 h 59 8 (120x80)
8.601.0148C INDEPENDENT 2800 25 30÷200 435÷2900 285÷630 1.26÷2.77 6,5 hp 3600 - 40 40/88 47x57 h 57 8 (120x80)
8.601.0134C THERMIC 9 26 30÷200 435÷2900 450÷780 1.98÷3.44 9 hp 3400 - 40 45/99 70x52 h 70 9 (120x80)
8.601.0111 THERMIC 10 D 27 30÷180 435÷2465 510÷1020 2.25÷4.49 10 hp 1600 - 40 95/209 103,73 h 100 1 (120x80)
8.601.0115 THERMIC 11H 28 30÷200 435÷2900 540÷1080 2.38÷4.76 11 hp 1700 - 40 64/141 104x66 h 90 1 (120x80)
8.601.0133 THERMIC 13H 2518 29 30÷250 435÷3625 510÷1080 2.38÷4.76 13cv 1700 - 40 61/134 100x66 h 92 8 (120x113)
8.664.0004C PARTNER 1210 LP 11 100 (130) 1450 (1885) 345÷600 1.52÷2.64 1700 3400 110/220~60 40 14/31 47x32 h 27 49(120-100)
8.663.0002 OREGON 1509 XP 13 130 (145) 1885 (2102) 480÷900 2.1÷3.96 2600 3400 220~60 40 25/55 38x39h71 18(120x80)
8.613.0005 LMX 1211M 14 100 (120) 1450 (1740) 450÷780 1.98÷3.44 3300 3400 220~60 40 32/70 60x37,5h74 12(120x80)
8.613.0026 LMX 160M 14 160 (200) 2320 (2900) 325÷510 1.43÷2.25 3300 1700 220~60 40 32/70 60x37,5h74 12(120x80)
8.613.0014 LMX 170T 14 50÷170 725÷2465 350÷800 1.54÷3.52 4700 1700 3ph 220~60 40 32/70 60x37,5h74 12(120x80)
8.613.0034 LMX 170T 14 50÷170 725÷2465 350÷800 1.54÷3.52 4700 1700 380~60 40 32/70 60x37,5h74 12(120x80)
8.665.0004 ARIZONA 1209 15 120 (150) 1740(2175) 345÷510 1.52÷2.23 2300 1700 220 - 60 40 24/53 60x38 h 72 12(120-80)
8.659.0002 DANUBIO 1211 17 120 (150) 1740÷2175 345÷660 1.52÷2.91 3000 1700 220~60 40 36/79 75x40h62 9(120x80)
8.659.0010 DANUBIO 1511 18 30÷150 435÷2175 345÷660 1.52÷2.91 4000 1700 3ph 220~60 40 36/79 75x40h62 9(120x80)
8.659.0027 DANUBIO 1511 18 30÷150 435÷2175 345÷660 1.52÷2.91 4000 1700 380~60 40 36/79 75x40h62 9(120x80)
8.659.0026 DANUBIO 2013 18 200 (230) 2900÷3335 450÷780 1.98÷3.44 6800 1700 3ph 220~60 40 36/79 75x40h62 9(120x80)
8.659.0028 DANUBIO 2013 18 200 (230) 2900÷3335 450÷780 1.98÷3.44 6800 1700 380~60 40 36/79 75x40h62 9(120x80)
8.657.0608 MICHIGAN 1211 19 120 (150) 1740÷2175 345÷660 1.52÷2.91 3000 1700 220~60 40 51/112 50x60h107 1(120x80)
8.657.0612 MICHIGAN 2013 19 200 (230) 2900÷3335 450÷780 1.98÷3.44 6800 1700 3ph 220~60 40 53/117 50x60h107 1(120x80)
8.657.0621 MICHIGAN 2013 19 200 (230) 2900÷3335 450÷780 1.98÷3.44 6800 1700 380~60 40 53/117 50x60h107 1(120x80)
8.654.0012 COLUMBIA 1211 20 100 (120) 1450 (1740) 450÷780 1.98÷3.44 3300 1700 220~60 40 47/103 55X62H58 12(120X100)
8.654.0014 COLUMBIA 2018 20 30÷200 435÷2900 540÷1080 2.38÷4.78 8400 1700 3ph 220~60 40 51/112 55X62H58 12(120X100)
8.654.0009 COLUMBIA 2018 20 30÷200 435÷2900 540÷1080 2.38÷4.78 8400 1700 380~60 40 51/112 55X62H58 12(120X100)
8.654.0049 COLUMBIA 2013 20 200 (230) 2900÷3335 450÷780 1.98÷3.44 6800 1700 3ph 220~60 40 51/112 55X62H58 12(120X100)
8.654.0050 COLUMBIA 2013 20 200 (230) 2900÷3335 450÷780 1.98÷3.44 6800 1700 380~60 40 51/112 55X62H58 12(120X100)
8.626.0009 MCHPV 1211 21 120 (150) 1740÷2175 345÷660 1.52÷2.91 3000 1700 220~60 40 40/88 75X50H35 9(120X80)
8.656.0021 MCHPV 2013 21 200 (230) 2900÷3335 450÷780 1.98÷3.44 6800 1700 3ph 220~60 40 50/110 75X50H35 9(120X80)
8.626.0010 MCHPV 2018 21 30÷200 435÷2900 540÷1080 2.38÷4.78 8400 1700 380~60 40 50/110 75X50H35 9(120X80)
8.626.0022 MCHPV 2018 21 30÷200 435÷2900 540÷1080 2.38÷4.78 8400 1700 3ph 220~60 40 50/110 75X50H35 9(120X80)
Hyper C LP
220V & 380V~60 Hz60Hz
10
Cold water high-pressure cleaner
Optional:
Accessoires pages).
high pressure for tough dirt
480 l/hhigh
900 l/hhigh
RENO
Accessory holder
Ergonomic handle
Hose-reel
Cable holder
Reno 1315
operat. pressure/max
operat. pressure/max
delivery rate
delivery rate
abs. power/voltage
detergent tank
inlet max temperature
machine dimensions
machine weight
11
Cold water high-pressure cleaner
Optional:
Accessoires pages).
suction with externalsuction probe.
connection + nozzle set: suction of the detergent and different angles of the jet,
Partner LPAccessory holder
Power cable holder
Lance with nozzle quick
Inlet quick coupling 3/8 M
Pressure adjusting knob
Shock absorbers
Integrateddetergent suction
Partner 1210 LP
operat. pressure/max
operat. pressure/max
delivery rate
delivery rate
abs. power/voltage
detergent tank
inlet max temperature
machine dimensions
machine weight
NEW
9
12
Cold water high-pressure cleaner
Optional:
8.666.0002
California LPErgonomic handle
Power cable holder
Hose reel(Available only
on 8.666.0002)
Pressure regulator
Detergent tank
connection.
California 1109 LP
operat. pressure/max
operat. pressure/max
delivery rate
delivery rate
abs. power/voltage
detergent tank
inlet max temperature
machine dimensions
machine weight
connection + nozzle set: suction of the detergent and different angles of the
NEW
13
Cold water high-pressure cleaner
Oregon 1509 XP
Operating pressure/max
Operating pressure/max
Delivery rate
Delivery rate
Absorbed power/voltage
Detergent tank 2 l.
connection.
Optional:
accessoires pages).
Detergent tank.connection + nozzle set: suction of the detergent and different angles of the
Accessory holder
Ergonomic handle
Power cable holder
Pressure adjusting knob
High-pressure hose reel
Oregon XP
steel pistons brass head
9
14
Cold water high-pressure cleaner
Optional:
Accessoires pages).
(three phase)
(single phase)
LMX XP
Accessory holder Power cable holder
Ergonomic handle
High-pressure hose-reel
LMX 1211 XP LMX 1509 XP LMX 2007 XP LMX 1713 XP LMX 2011 XP
operat. pressure/max
operat. pressure/max
delivery rate
delivery rate
abs. power/voltage 1ph 1ph
detergent tank
inlet max temperature
machine dimensions
machine weight
9
Pressure regulator
Detergent tank
15
Cold water high-pressure cleaner
brass linear. pump head
Power cable holder
Detergent tank
Glicerine pressure gauge
Ergonomic handle
Hose reel(Available only
on 8.665.0002)
Pressure regulator
1450
connection.
Arizona 1209 LP
operat. pressure/max
operat. pressure/max
delivery rate
delivery rate
abs. power/voltage
detergent tank
inlet max temperature
machine dimensions
machine weight
connection + nozzle set: suction of the detergent and different angles of the
NEW
9
Optional:
8.665.0002
16
Cold water high-pressure cleaner
GARAGE 1211 LP GARAGE 1612 LP
operat. pressure/max
operat. pressure/max
delivery rate
delivery rate
abs. power/voltage
detergent tank
inlet max temperature
machine dimensions
machine weight
1450
Varnished steel frame
Shock absorbersInlet quick coupling
3/8 M
Optional:
hose)
wheels and extended handle for
trolley version.
installationwall installation code set with wheels and
extended handle for trolley version
Trolley version
NEW
17
Cold water high-pressure cleaner
Optional:
brass linear pump head with
single phase
Power cable holder
Ergonomic handle
1450
DANUBIO 1211 LP DANUBIO 1510 LP
operat. pressure/max
operat. pressure/max
delivery rate
delivery rate
abs. power/voltage
detergent tank
inlet max temperature
machine dimensions
machine weight
Pressure adjusting knob
Glicerine pressure gauge
9
18
Cold water high-pressure cleaner
brass linear pump head with
Three phase
Power cable/hose holder
Ergonomic handle
1450
DANUBIO 1612 LP DANUBIO 1515 LP DANUBIO 2015 LP
operat. pressure/max
operat. pressure/max
delivery rate
delivery rate
abs. power/voltage
detergent tank
inlet max temperature
machine dimensions
machine weight
Pressure adjusting knob
Glicerine pressure gauge
Optional:
9
19
Cold water high-pressure cleaner
1450
MICHIGAN 1211 LP MICHIGAN 1515 LP MICHIGAN 2015 LP MICHIGAN 2021 LP MICHIGAN 2515 LP
operat. pressure/max
operat. pressure/max
delivery rate
delivery rate
abs. power/voltage
detergent tank
inlet max temperature
machine dimensions
machine weight
Ergonomic handle
Glicerine pressure gauge
Standard equipment:
Three ceramic pistons, brass linear pump head
.
Hose reel (optional)
Rotating coupling, soft
lance
8.657.0619
8.657.0609
8.657.0610
8.657.0611
8.657.0631
Lance with S/S pipe
pressure regulator
(three phase)
(three phase)
(single phase)
9
20
Cold water high-pressure cleaner
Optional:
Steel frame
Power cable holder
COLUMBIA 1211 LP COLUMBIA 1515 LP COLUMBIA 2015 LP COLUMBIA 2021 LP
operat. pressure/max
operat. pressure/max
delivery rate
delivery rate
abs. power/voltage
detergent tank
inlet max temperature
machine dimensions
machine weight
1450
Steel cover
9
21
Cold water high-pressure cleaner
Varnished steel frame
Shock absorbers
version:
Optional:
Brass head pump with total stop system
phase model).
MCHP LP
MCHPV 1211 LP MCHPV 1515 LP MCHPV 2015 LP MCHPV 2021 LP
operat. pressure/max
operat. pressure/max
delivery rate
delivery rate
abs. power/voltage
detergent tank
inlet max temperature
machine dimensions
machine weight
1450
1
2
3
only
Standard equipment:
Water inlet 3/4 " M
(three phase)
(three phase)
(single phase)
9
4
22
Cold water high-pressure cleaner
Optional:
suction with externalsuction probe.
HYPER C LP
Steel frame
Power cable holder
Hyper C 1211 LP Hyper C 1515 LP Hyper C 2015 LP Hyper C 2021 LP Hyper C 2515 LP
operat. pressure/max
operat. pressure/max
delivery rate
delivery rate
abs. power/voltage
detergent tank
inlet max temperature
machine dimensions
machine weight
1450
Steel cover
motor with water cooling for best pump coupling
exceptmod.1211
mod.1211
23
Cold water high-pressure cleaner
Optional:
Accessoires pages).
discharge.
MAGNUM 3317 LP
operat. pressure/max
operat. pressure/max
delivery rate
delivery rate
abs. power/voltage
detergent tank
inlet max temperature
machine dimensions
machine weight
1450
Tough wheels
Steel frame
Ergonomic handle
Front rotating wheels.
330 bar
24
Cold water high-pressure cleaner with combustion engine
Optional:
THERMIC 5H
Steel frame
Hose holderHonda
unleaded gasoline engine
Nozzles holder
THERMIC 5H
operating pressure
operating pressure
delivery rate
delivery rate
engine
engine type
Pump type
inlet max temperature
machine dimensions
machine weight
25
Steel frame
Hose holderunleaded gasoline engine
Nozzles holder
INDEPENDENT 2800
operating pressure
operating pressure
delivery rate
delivery rate
engine
engine type LAVOR
Pump type
inlet max temperature
machine dimensions
machine weight
connection.
Cold water high-pressure cleaner with combustion engine
Optional:
26
Cold water high-pressure cleaner with combustion engine
THERMIC 9
THERMIC 9
Operating pressure/max
Operating pressure/max
Delivery rate
Delivery rate
LAVOR
Pump type
connection.
Optional:
hose holder
Tough wheels
Steel frame
Nozzles
Pressure regulation
27
cylinder, air cooled.
between engine and pump.
Pneumatic wheels
Steel frame
Electrical start with engine functions control
Lombardini Diesel engine
THERMIC 10 D
operating pressure
operating pressure
delivery rate
delivery rate
engine
engine type
Pump type
inlet max temperature
machine dimensions
machine weight
Cold water high-pressure cleaner with combustion engine
Optional:
Standard equipment:
Rotating coupling, soft
lance
28
Cold water high-pressure cleaner with combustion engine
between engine and pump.
THERMIC 11H
THERMIC 11H
operating pressure
operating pressure
delivery rate
delivery rate
engine 11 hp
engine type
Pump type
inlet max temperature
machine dimensions
machine weight
Tough wheels
Steel frame
Honda unleaded gasoline engine
Standard equipment:
Rotating coupling, soft
lance
Optional:
29
Cold water high-pressure cleaner with combustion engine
between engine and pump.
THERMIC 13H
THERMIC 13H
operating pressure
operating pressure
delivery rate
delivery rate
engine
engine type
Pump type
inlet max temperature
machine dimensions
machine weight
Honda unleaded gasoline engine
Steel frame
Tough wheels
Standard equipment:
Rotating coupling, soft
lance
Optional:
30
The hot water high-pressure cleaner is the best tool for tough or non water-soluble dirt removal.
ideal in several sectors like agriculture, food industry and primary and secondary building.
Excellent for machines washing like: tools, engines, farm tractors and means of transport (oily dirt); removal or animal and vegetable residuals (stables and food industry), washing of heavy building
perfect hygienising effect.
Why a hot water high-pressure cleaner?
whenever it is necessary to degrease oily or particularly tough
on some kind of dirt), because heat assists dirt degrease.
cleaning fixed costs.
The boiler
of the pump; the difference between inlet and outlet water temperature is technically indicated like DeltaT.Boiler dimensions, in other words coil and gas oil consumption, determine the thermal power of the burner.
cleaners with higher delivery rates have more powerful burners: to grant the best operating temperature in each working condition. All our boilers have thermal output very high, near
What changes among high-pressure cleaners with similar performances?
and tear and to continuous use, that raises progressively with the increase of manufacturing components specifications or moving up from a model to the next class one.
Hot water high-pressure cleaner
31
the rotation of an inclined wobble plate
are few moving elements.
a system of connecting rods and crankshaft. The
same level or linear) is perpendicular to the motor rotation axle.
and it has a better self priming.
motor, this allows a better thermal exchange
operating temperature of the motor and pump mechanical elements, granting a better reliability and longer life.
Releasing the gun trigger the pump stops
down of the motor/pump group whenever the gun trigger is
the machine shut down. Prevention, energy saving, top safety and pump longer life.
with intelligent shut down:
of the motor/pump group whenever the gun trigger is pulled and
or there are leakages in the pressure circuit, the machine shuts
Prevention, energy saving, top safety and pump longer life.
The electric motor transfers the same number of
are supplied at the same operating pressure of
areas far from the user.
supplied lowering the operating pressure of the
on areas near to the user.
The release of the gun trigger produces a strong counterstroke in the pump. This device amortizes this power with great benefit for the
pump components and for the user, because it removes all the vibrations.
operating pressure.
and for water saving.
supply the antiscale product inside the header tank
electronic elements) protects the coil from scale formation; the use of the chemical product inside the circuit is the only efficient solution against scale.
obtain low temperatures inside the pump avoiding greasy deposit formation that would block the pump.
burner avoiding dry operation of the gasoil pump.
running parameters of the machine grant the best compromise among performance, result of the cleaning task and ecological footprint. The relation between water temperature and boiler fuel consumption is optimized.
Hot water high-pressure cleaner
32
opera
ting p
ressu
re (m
ax pr
essu
re)
opera
ting p
ressu
re (m
ax pr
essu
re)
deliv
ery ra
te
deliv
ery ra
te
abso
rbed p
ower
rpm volta
ge
outle
t tem
p.
fuel c
onsu
mptio
n
diese
l tank
antis
cale
tank
heat
outpu
t
pack
aging
pack
aging
weig
ht
pag bar psi l/h GPM usa W RPM V °C l/h - gal/h l - gal l - gal kW cm Kg - lbs
8.699.0015 VULCANO 74 34 - - - - 300 - 230~50 max 140° 5,6 - 1.5 18 - 4.8 - 74 94x65x90 60 - 132
8.625.0001 MISSISSIPPI 1310 XP 35 30÷130 435÷1885 330÷600 1.45÷2,64 3000 2800 230~50 max 90° 2,83 - 0.75 14 - 3.7 - 38 80x55x83 65 - 143
8.625.0002 MISSISSIPPI 1310 XP DP 35 30÷130 435÷1885 330÷600 1.45÷2,64 3000 2800 230~50 max 90° 2,83 - 0.75 14 - 3.7 - 38 80x55x83 65 - 143
8.620.0601 NPX 1211 XP 36 30÷120 435÷1740 330÷660 1.45÷2.91 3200 2800 230~50 max 140° 4,72 - 1.25 18 - 4.8 - 58 94x65x90 113 - 248.6
8.620.0602 NPX 1511 XP 36 30÷150 435÷2175 330÷660 1.45÷2.91 4000 2800 400~50 max 140° 4,72 - 1.25 18 - 4.8 - 58 94x65x90 114 - 250.8
8.620.0617 NPX 1813 XP 36 30÷180 435÷2610 400÷780 1.76÷3.43 6300 2800 400~50 max 140° 4,72 - 1.25 18 - 4.8 - 58 94x65x90 115 - 253
8.627.0001C TORRENS 1211 LP 37 30÷110 435÷1595 330÷660 1.45÷2.91 3000 1450 230 - 50 max 140° 3,78 - 1 18 - 4.8 - 42 94x65x90 120 - 264
8.627.0002C TORRENS 1515 LP 37 30÷150 435÷2175 450÷900 1.98÷3.96 5500 1450 400 - 50 max 140° 5,6 -1.48 18 - 4.8 - 74 94x65x90 130 - 286
8.627.0003C TORRENS 2015 LP 37 30÷200 435÷2900 450÷900 1.98÷3.96 7300 1450 400 - 50 max 140° 5,6 - 1.48 18 - 4.8 - 74 94x65x90 132 - 290.4
8.630.0001 TEXAS 1209 LP 38 30÷120 435÷1740 330÷510 1.45÷2.23 2600 1450 230 - 50 max 140° 3,3 - 0.87 16 - 4.3 - 36 73x50x100 72 - 158
8.630.0002 TEXAS 1510 LP 38 30÷150 435÷2175 330÷600 1.45÷2.6 3000 1450 230 - 50 max 140° 3,8 - 1 16 - 4.3 - 42 73x50x100 74 - 163
8.630.0003 TEXAS 1612 LP 39 30÷160 435÷2320 330÷690 1.45÷3 4200 1450 400 - 50 max 140° 3,8 - 1 16 - 4.3 - 42 73x50x100 80 - 176
8.630.0003 TEXAS 2014 LP 39 30÷200 435÷2900 450÷840 1.98÷3.7 6000 1450 400 - 50 max 140° 3,8 - 1 16 - 4.3 - 42 73x50x100 82 - 180
8.621.0947 LKX 1310 LP 40 30÷110 435÷1595 330÷660 1.45÷2.91 3000 1450 230~50 max 140° 4,72 - 1,25 18 - 4.8 - 58 94x65x90 120 - 264
8.621.0968 LKX 1713 LP RA 41 30÷170 435÷2465 450÷750 1.98÷3.30 4700 1450 400~50 max 140° 5,6 - 1.5 18 - 4.8 - 74 94x65x90 130 - 286
8.621.0934 LKX 1515 LP RA 41 30÷150 435÷2175 450÷900 1.98÷3.96 5500 1450 400~50 max 140° 5,6 - 1.5 18 - 4.8 - 74 94x65x90 130 - 286
8.621.0935 LKX 2015 LP RA 41 30÷200 435÷2900 450÷900 1.98÷3.96 7300 1450 400~50 max 140° 5,6 - 1.5 18 - 4.8 - 74 94x65x90 132 - 290.4
8.622.0901 TEKNA 1515 LP RA 42 30÷150 435÷2175 450÷900 1.98÷3.96 5500 1450 400~50 max 140° 4,72 - 1.25 22 - 5.8 2,4 - 0.6 58 130x78x108 160 - 352
8.622.0902 TEKNA 2015 LP RA 42 30÷200 435÷2900 450÷900 1.98÷3.96 7300 1450 400~50 max 140° 4,72 - 1.25 22 - 5.8 2,4 - 0.6 58 130x78x108 165 - 363
8.622.0921 TEKNA 2021 LP RA 42 30÷200 435÷2900 630÷1260 2.77÷5.55 9700 1450 400~50 max 140° 6,6 - 1,75 22 - 5.8 2,4 - 0.6 88 130x78x108 180 - 396
8.621.0921 HYPER L 1211 LP 43 30÷110 435÷1595 345÷660 1.52÷2.91 3000 1450 230~50 max 140° 4,72 - 1.25 18 - 4.8 - 58 94x65x90 124 - 272.8
8.621.0907 HYPER L 1515 LP RA 44 30÷150 435÷2175 345÷900 1.52÷3.96 5500 1450 400~50 max 140° 5,6 - 1,5 18 - 4.8 - 74 94x65x90 135 - 297
8.621.0908 HYPER L 2015 LP RA 44 30÷200 435÷2900 450÷900 1.98÷3.96 7300 1450 400~50 max 140° 5,6 - 1,5 18 - 4.8 - 74 94x65x90 136 - 299.2
8.621.0928 HYPER L 2021 LP RA 44 30÷200 435÷2900 630÷1260 2.77÷5.55 9700 1450 400~50 max 140° 5,6 - 1,5 18 - 4.8 - 74 94x65x90 136 - 299.2
8.623.0905 HYPER T 2015 LP 45 30÷200 435÷2900 450÷900 1.98÷3.96 7300 1450 400~50 max 140° 6.6 - 1.75 22 - 5.8 2.4 - 0.6 88 130x78x108 166 - 365.2
8.623.0928 HYPER T 2515 LP 45 30÷250 435÷3600 450÷900 1.98÷3.96 8700 1450 400~50 max 140° 6.6 - 1.75 22 - 5.8 2.4 - 0.6 88 130x78x108 181 - 398.2
8.623.0902 HYPER T 2021 LP 45 30÷200 435÷2900 630÷1260 2.77÷5.55 9700 1450 400~50 max 140° 6.6 - 1.75 22 - 5.8 2.4 - 0.6 88 130x78x108 181 - 398.2
8.624.0601 HHPV 1211 LP 46 30÷120 435÷1740 345÷660 1.52÷2.91 3000 1450 230 - 50 max 140° 4,72 - 1.25 20 - 5.3 - 58 87x55x184 178 - 392
8.624.0602 HHPV 1515 LP 46 30÷150 435÷2175 345÷900 1.52÷2.91 5500 1450 400 - 50 max 140° 4,72 - 1.25 20 - 5.3 - 58 87x55x184 178 - 392
8.624.0603 HHPV 2015 LP 46 30÷200 435÷2900 450÷900 1.98÷3.96 7300 1450 400 - 50 max 140° 4,72 - 1.25 20 - 5.3 - 58 87x55x184 178 - 392
8.624.0604 HHPV 2021 LP 46 30÷200 435÷2900 630÷1260 2.77÷5.55 9700 1450 400 - 50 max 140° 4,72 - 1.25 20 - 5.3 - 58 87x55x184 178 - 392
8.624.0609 HHPX 1211 LP 46 30÷120 435÷1740 345÷660 1.52÷2.91 3000 1450 230 - 50 max 140° 4,72 - 1.25 20 - 5.3 - 58 87x55x184 178 - 392
8.624.0610 HHPX 1515 LP 46 30÷150 435÷2175 345÷900 1.52÷2.91 5500 1450 400 - 50 max 140° 4,72 - 1.25 20 - 5.3 - 58 87x55x184 178 - 392
8.624.0611 HHPX 2015 LP 46 30÷200 435÷2900 450÷900 1.98÷3.96 7300 1450 400 - 50 max 140° 4,72 - 1.25 20 - 5.3 - 58 87x55x184 178 - 392
Vulcano Mississippi XP Tekna LPTexas LP LKX LPNPX XP Torrens LP
Hot water high-pressure cleaners
NEW
33
opera
ting p
ressu
re (m
ax pr
essu
re)
opera
ting p
ressu
re (m
ax pr
essu
re)
deliv
ery ra
te
deliv
ery ra
te
abso
rbed p
ower
rpm volta
ge
outle
t tem
p.
fuel c
onsu
mptio
n
diese
l tank
antis
cale
tank
heat
outpu
t
pack
aging
pack
aging
weig
ht
pag bar psi l/h GPM usa W RPM V °C l/h - gal/h l - gal l - gal kW cm Kg - lbs
8.624.0612 HHPX 2021 LP 46 30÷200 435÷2900 630÷1260 2.77÷5.55 9700 1450 400 - 50 max 140° 4,72 - 1.25 20 - 5.3 - 58 87x55x184 178 - 392
8.629.0001 HHPX RC 47 30÷120 435÷1740 345÷660 1.52÷2.91 97001400700
230 - 50 40°/60° 6700 W - - - 80x50x170 135 - 297
8.601.0113 THERMIC 5 HW 48 30÷100 435÷1450 300÷600 1,32÷ 2,64 5hp 3000 - max 90° 2.83 - 0,75 6 - 1.6 - 38 60x70x77 109 - 239.8
8.601.0099 THERMIC 10 HW 49 30÷170 435÷2465 1020 4,49 10hp 1700 - max 140° 4.72 - 1.25 30 - 7.9 - 58 68x99x74 160 - 352
8.601.0052 THERMIC 17 HW 50 30÷200 435÷2900 1320 5,82 17hp 1700 - max 140° 5.6 - 1.5 40 - 10.5 - 74 113x76x85 240 - 528
8.601.0160 THERMIC 17 HW silence 51 30÷200 435÷2900 1320 5,82 17hp 1700 - max 140° 5.6 - 1.5 40 - 10.5 - 74 113x76x85 245 - 539
8.625.0003 MISSISSIPPI 1310 35 130 (150) 1885 (2175) 330÷600 1.45÷2,64 3000 3400 220~60 max 90° 2.83 - 0,75 14 - 3.7 - 38 80x55x83 65 - 143
8.620.0608 NPX 1211 36 100 (120) 1450 (1740) 450÷780 1.98÷3.44 3300 3400 220~60 max 140° 3,78 - 1 18 - 4.8 - 42 94x65x90 113 - 249
8.620.0618 NPX 1511 36 150 (170) 2175 (2465) 450÷780 1.98÷3.44 4000 3400 3ph 220~60 max 140° 3,78 - 1 18 - 4.8 - 42 94x65x90 113 - 249
8.620.0619 NPX 1511 36 150 (170) 2175 (2465) 450÷780 1.98÷3.44 4000 3400 380~60 max 140° 3,78 - 1 18 - 4.8 - 42 94x65x90 113 - 249
8.621.0965 LKX 1211 40 110 (150) 1595 (2175) 345÷660 1.52÷2.91 3000 1700 220~60 max 140° 3,78 - 1 18 - 4.8 - 42 94x65x90 120 - 264
8.621.0909 LKX 2013 41 200 (210) 2900 (3045) 450÷780 1.98÷3.44 7300 1700 3ph 220~60 max 140° 3,78 - 1 18 - 4.8 - 74 94x65x90 130 - 286
8.621.0966 LKX 2013 41 200 (210) 2900 (3045) 450÷780 1.98÷3.44 7300 1700 380~60 max 140° 3,78 - 1 18 - 4.8 - 74 94x65x90 130 - 286
8.622.0905 TEKNA 1211 42 100 (120) 1450 (1740) 345÷660 1.51÷2.91 3300 1700 220~60 max 140° 4.7 - 1.24 18 - 4.8 2.4 58 125x69x87 113 - 249
8.622.0906 TEKNA 2013 42 30÷200 435÷2900 390÷780 1.98÷3.44 7000 1700 3ph 220~60 max 140° 5.7 - 1.51 18 - 4.8 2.4 74 125x69x87 114 - 251
8.622.0916 TEKNA 2013 42 30÷200 435÷2900 390÷780 1.98÷3.44 7000 1700 380~60 max 140° 5.7 - 1.51 18 - 4.8 2.4 74 125x69x87 114 - 251
8.623.0906 HYPER T 2018 45 30÷200 435÷2900 540÷1080 4.78÷9.56 8700 1700 3ph 220~60 max 140° 6.6 - 1.75 22 - 5.9 2.4 88 94x65x90 166 - 365
8.623.0924 HYPER T 2018 45 30÷200 435÷2900 540÷1080 4.78÷9.56 8700 1700 380~60 max 140° 6.6 - 1.75 22 - 5.9 2.4 88 94x65x90 166 - 365
Thermic 10 HW Thermic 17 HWThermic 17Thermic 5 HWHHPX-RC LPHHP LPHyper L LP Hyper T LP
Hot water high-pressure cleaners
NEWNEW
220V & 380V~60 Hz60Hz
34
Portable boiler
Optional:
to connect any cold high pressure cleaner to the Vulcano.
thermal efficiency steel coil.
switch presence.
Vulcano 74
Inlet quick coupling3/8 M
Control panel
Oulet quick coupling3/8 M Big wheels
Heavy frame
VULCANO 74
operat. pressure allowed
operat. pressure allowed
delivery rate allowed
delivery rate allowed
abs. power/voltage 1 ph
diesel tank
max temp. inlet/outlet
fuel consumption
heat output
machine dimensions
machine weight
35
Hot water high-pressure cleaner
Mississippi XP
MISSISSIPPI 1310 XP MISSISSIPPI 1310 XP DP
operat. pressure/max
operat. pressure/max
delivery rate
delivery rate
abs. power/voltage 1 ph 1 ph
diesel tank/detergent tank
max temp. inlet/outlet
fuel consumption/heat output
machine dimensions
machine weight
thermal efficiency steel coil.
valve.
Temperature regulation gauge
Ergonomic handle
Accessory holderPower cable holder
Optional:
Accessoires pages).
33
36
Hot water high-pressure cleaner
Optional:
Vertical burner with high thermal efficiency steel coil.
gauge.
NPX XP
Lance/gun holder
Panel with analogic controls
Accessories holderPower cable holder
Heavy frame
NPX 1211 XP NPX 1511 XP NPX 1813 XP
operat. pressure/max
operat. pressure/max
delivery rate
delivery rate
abs. power/voltage 1 ph
diesel tank/detergent tank
max temp. inlet/outlet
fuel consumption/heat output
machine dimensions
machine weight
33
37
Hot water high-pressure cleaner
thermal efficiency steel coil.
gauge.
Heavy frame
Torrens LP
Lance/gun holder
Panel with analogic controls
Torrens 1211 LP Torrens 1515 LP Torrens 2015 LP
operat. pressure/max
operat. pressure/max
delivery rate
delivery rate
abs. power/voltage 1 ph
diesel tank/detergent tank
max temp. inlet/outlet
fuel consumption/heat output
machine dimensions
machine weight
1450
Ergonomic handle
38
Hot water high-pressure cleaner
Texas LP(single phase)
Panel with analogic controls
Lance/gun holder
Tough wheels
Hose-reel(OPTIONAL)
Glicerine pressureùgauge
Pressure regulator
Texas 1209 LP Texas 1510 LP
operat. pressure/max
operat. pressure/max
delivery rate
delivery rate
abs. power/voltage 1 ph 1 ph
diesel tank/detergent tank
max temp. inlet/outlet
fuel consumption/heat output
machine dimensions
machine weight
1450
Optional:
tank and/or antiscale device.
Vertical burner with high thermal efficiency steel coil.
gauge with patented system..
holder
NEW
39
Hot water high-pressure cleaner
Texas LP(three phase)
Panel with analogic controls
Lance/gun holder
Tough wheels
Hose-reel(OPTIONAL)
Glicerine pressureùgauge
Pressure regulator
Texas 1612 LP Texas 2014 LP
operat. pressure/max
operat. pressure/max
delivery rate
delivery rate
abs. power/voltage
diesel tank/detergent tank
max temp. inlet/outlet
fuel consumption/heat output
machine dimensions
machine weight
1450
Optional:
tank and/or antiscale device.
Vertical burner with high thermal efficiency steel coil.
gauge with patented system..
holder
NEW
40
Hot water high-pressure cleaner
Optional:
tank and/or antiscale device.
Vertical burner with high thermal efficiency steel coil.
Heavy frame
Lance/gun holder
Panel with analogic controls
LKX 1310 LP
operat. pressure/max
operat. pressure/max
delivery rate
delivery rate
abs. power/voltage 1 ph
diesel tank/detergent tank
max temp. inlet/outlet
fuel consumption/heat output
machine dimensions
machine weight
1450
Ergonomic handle
gauge with high sensitive stainless steel sensor.
.
33
LKX LP(single phase)
41
Hot water high-pressure cleaner
Optional:
tank and/or antiscale device.
Vertical burner with high thermal efficiency steel coil.
gauge.
LKX LP(three phase) Accessory holder
Power cable holder
Panel with analogic controls
Ergonomic handle
Heavy frame
LKX 1713 LP LKX 1515 LP LKX 2015 LP
operat. pressure/max
operat. pressure/max
delivery rate
delivery rate
abs. power/voltage
diesel tank/detergent tank
max temp. inlet/outlet
fuel consumption/heat output
machine dimensions
machine weight
1450
Standard equipment:
Rotating coupling, soft
lance
33
42
Hot water high-pressure cleaner
Ergonomic handle
Optional: hose-reel
Heavy frame
Optional:
thermal efficiency steel coil.
burner.
Low voltage main switch
Tekna LP
Accessory holder Power cable holder
TEKNA 1515 LP TEKNA 2015 LP TEKNA 2021 LP
operat. pressure/max
operat. pressure/max
delivery rate
delivery rate
abs. power/voltage
diesel tank/detergent tank/antiscale
max temp. inlet/outlet
fuel consumption/heat output
machine dimensions
machine weight
1450
Standard equipment:
Rotating coupling, soft
lance
33
43
Hot water high-pressure cleaner
Optional:
Vertical burner with high thermal efficiency steel coil.
Auxiliary motor for burner air cooling and mechanical two ways fuel pump.
gauge with high sensitive stainless steel sensor.
.
Hyper L(single phase)
Easy access to main mechanical components
HYPER L 1211 LP
operat. pressure/max
operat. pressure/max
delivery rate
delivery rate
abs. power/voltage 1 ph
diesel tank/detergent tank
max temp. inlet/outlet
fuel consumption/heat output
machine dimensions
machine weight
1450
Impact and weather resistant, single piece polypropylene cover
Lance/gun holder
44
Hot water high-pressure cleaner
Optional:
motor with: water cooling
interchangeable with some other pump manufacturer.
best pump coupling.
Hyper L(three phase)
Panel with analogic controls
Heavy frame
HYPER L 1515 LP HYPER L 2015 LP HYPER L 2021 LP
operat. pressure/max
operat. pressure/max
delivery rate
delivery rate
abs. power/voltage
diesel tank/detergent tank
max temp. inlet/outlet
fuel consumption/heat output
machine dimensions
machine weight
1450Easy access to main mechanical components
Standard equipment:
Rotating coupling, soft
lance
45
Hot water high-pressure cleaner
Easy access to main mechanical components
inlet water filter
Optional:
hose and gun vibrations
model).
Hyper T
HYPER T 2015 LP HYPER T 2021 LP HYPER T 2515 LP
operat. pressure/max
operat. pressure/max
delivery rate
delivery rate
abs. power/voltage
diesel tank/detergent tank/antiscale
max temp. inlet/outlet
fuel consumption/heat output
machine dimensions
machine weight
1450
Impact and weather resistant, polypropylene and polyethylene
only
best pump coupling.
tank and antiscale device.
Standard equipment:
Rotating coupling, soft
lance
33
46
Hot water high-pressure cleaner
Optional:
insulation protection/heating
system
scale device
version:
air coolingdosing pump.
bearing water cooled motor.
HHP LP
HHPV 1211 LP RA HHPV 1515 LP RA HHPV 2015 LP RA HHPV 2021 LP RA
Operating pressure/max
Operating pressure/max
Delivery rate
Delivery rate
Absorbed power/voltage 1 ph
Diesel tank/detergent
Fuel consumption/heat output
1450
protection cover
Easy access to main mechanicalcomponents
Auxiliary motor for burner
Varnished steel or stainless steel structure
Stainless steel fixing base support
Lance, gun high pressurehose support
Closing with locker
Optional Rotating Booms code. 6.608.0032
47
Hot water high-pressure cleaner
Environmentfriendly
Optional:
not included)
insulation protection/heating
system
detergent and wax regulator
cover, mechanical coin operating
of softened or demineralized water
HHPX-RC
HHPX-RC
Operating pressure/max
Operating pressure/max
Delivery rate
Delivery rate
Absorbed power/voltage
Burner absorbed power
Detergent tank/wax tank
1450
system it is possible to choose among different washing programs directly from the gun without stopping the cleaning task and saving a lot of time.
Easy access to main mechanicalcomponents
Electric boiler: no emissions in the environment, very low set
up and service cost
stainless steel structure
Stainless steel fixing base support
Lance, gun highpressure support
4 programs:1 Prewash cycle with shampoo (hot water, low pressure)2 HP washing (hot water, high pressure)3 Wax (hot water, low pressure)4 Final rinse (cold water, high pressure)
Closing with locker
NEW
48
with manual start. engine.
sturdy alternator.
Thermic 5 HWHot water self-contained unit Tough steel main frame
Diesel tank for burner
Manual start Honda unleaded
gasoline engine (tank 2,5 l.)
Hot water high-pressure cleaner with combustion engine
THERMIC 5HW
operat. pressure/max
operat. pressure/max
delivery rate
delivery rate
engine
engine type / Pump type
diesel tank 6 l. / 1.6 gal
max temp. inlet/outlet
fuel consumption/heat output
machine dimensions
machine weight
Optional:
Accessoires pages).
49
Optional:
chemical)
cylinder, air cooled. engine functions control.
sturdy alternator. regulator.
Thermic 10 HWHot water self-contained unit
Tough steel main frame
Electrical start
LombardiniDiesel engine
Unique diesel tank for engine and burner
Hot water high-pressure cleaner with combustion engine
THERMIC 10HW
operat. pressure/max
operat. pressure/max
delivery rate
engine
engine type / Pump type
diesel tank
max temp. inlet/outlet
fuel consumption/heat output
machine dimensions
machine weight
50
Optional:
diesel engine with electric start.
regulator.
function led and automatic
Thermic 17 HWHot water self-contained unit with integrated electric generator
Tough steel main frame
Unique diesel tank for engine and burner.
Electrical start
Flow rate regulation
LombardiniDiesel engine
Socket tool max 1,5 kW
Hot water high-pressure cleaner with combustion engine
Thermic 17 HW
operat. pressure/max
operat. pressure/max
delivery rate
engine
engine type / Pump type
diesel tank
max temp. inlet/outlet
fuel consumption/heat output
machine dimensions
machine weight
51
Optional:
generator
diesel engine with electric start.
regulator.
function led and automatic
Thermic 17 HW silence
Tough steel main frame
Unique diesel tank for engine and burner.
Electrical start
Flow rate regulation
LombardiniDiesel engine
Hot water high-pressure cleaner with combustion engine
Thermic 17 HW silence
operat. pressure/max
operat. pressure/max
delivery rate
engine
engine type / Pump type
diesel tank
max temp. inlet/outlet
fuel consumption/heat output
machine dimensions
machine weight
52
h.p. n
ozzle
0.30
h.p. n
ozzle
0.35
h.p. n
ozzle
0.40
h.p. n
ozzle
0.45
h.p. n
ozzle
0.50
h.p. n
ozzle
0.55
h.p. n
ozzle
0.60
h.p. n
ozzle
0.70
h.p. n
ozzle
0.75
h.p. n
ozzle
0.90
h.p. n
ozzle
0.30
h.p. n
ozzle
0.35
h.p. n
ozzle
0.40
h.p. n
ozzle
0.45
h.p. n
ozzle
0.50
h.p. n
ozzle
0.55
h.p. n
ozzle
0.60
h.p. n
ozzle
0.70
h.p. n
ozzle
0.75
h.p. n
ozzle
0.85
h.p. n
ozzle
0.30
h.p. n
ozzle
0.35
h.p. n
ozzle
0.40
h.p. n
ozzle
0.45
h.p. n
ozzle
0.50
h.p. n
ozzle
0.55
h.p. n
ozzle
0.60
h.p. n
ozzle
0.70
h.p. n
ozzle
0.75
h.p. n
ozzle
0.90
rotar
y noz
.-0.04
0
rotar
y noz
.-0.04
5
rotar
y noz
.-0.05
0
rotar
y noz
.-0.05
5
rotar
y noz
.-0.06
0
rotar
y noz
.-0.06
5
rotar
y noz
.-0.07
0
rotar
y noz
.-0.09
0
3.10
3.00
27
3.10
3.00
37
3.10
3.00
28
3.10
3.00
34
3.10
3.00
29
3.10
3.00
30
3.10
3.00
31
3.10
3.00
25
3.10
3.00
70
3.10
3.00
33
3.10
3.00
47
3.10
3.00
48
3.10
3.00
49
3.10
3.00
50
3.10
3.00
51
3.10
3.00
52
3.10
3.00
53
3.10
3.00
55
3.10
3.00
56
3.10
3.00
58
3.10
3.00
18
3.10
3.00
20
3.10
3.00
09
3.10
3.00
16
3.10
3.00
17
3.10
3.00
19
3.10
3.00
21
3.10
3.00
67
3.10
3.00
68
3.10
3.00
69
3.74
9.02
00*
3.74
9.02
01*
3.74
9.02
02*
3.74
9.02
03*
3.74
9.02
04*
3.74
9.02
05*
3.74
9.02
06*
3.74
9.02
63*
O O OO O O
O O OO O O
O O OO O O
O O OO O O
O O OO O O
O O OO O O
O O OO O O
O O OO O
O O OO O O
O O OO O O
O O OO O O O
O O O OO O O O
O O O OO O O
O O OO O O
O O OO O O
O O OO O O
O O OO O OO O O
O O OO O O
O O OO O O
O O OO O O
O O OO OO O
O OO O O
O O OO O
O O OO O O
O O OO O O
O O OO O O
O O OO O O
O O OO O O
O OO O O
O O OO O O
O O OO O O
O O OO O O
O O OO O O
nozzle 0° nozzle 15° nozzle 25°
Rotary nozzle* G1/4”F with S/S body and seat/nozzle in highly shock-resistant tungsten carbide * 1/4”M/M 24 Extension set for rotary nozzle: codes 3.749.0320 + 3.749.0004
High-pressure cleaner
Hig
h-pr
essu
re c
lean
erH
igh-
pres
sure
cle
aner
53
RENO 1315
PARTNER LP
CALIFORNIA 1109 LP
OREGON 1509 XP
LMX 1211 XP/ 1509 XP
LMX 2007 XP
LMX 1713 XP/ 2011 XP
ARIZONA 1209 LP
GARAGE 1211 LP/ 1612 LP
DANUBIO 1211 LP
DANUBIO 1510 LP/ 1612 LP
DANUBIO 1515 LP
DANUBIO 2015 LP
MICHIGAN 1211 LP
MICHIGAN 1515 LP RA
MICHIGAN 2015 LP RA
MICHIGAN 2021 LP RA
MICHIGAN 2515 LP RA
COLUMBIA 1211 LP RA
COLUMBIA 1515 LP RA
COLUMBIA 2015 LP RA
COLUMBIA 2021 LP RA
MCHP 1211 LP
MCHP 1515 LP
MCHP 2015 LP
MCHP 2021 LP
HYPER C 1211 LP
HYPER C 1515 LP RA
HYPER C 2015 LP RA
HYPER C 2021 LP RA
HYPER C 2515 LP RA
MAGNUM 2030 LP
MAGNUM 3317 LP
THERMIC 5H
INDEPENDENT 2800
THERMIC 9
THERMIC 10 D
THERMIC 11H
THERMIC 13H 2518
MISSISSIPI 1310 XP
MISSISSIPI 1310 XP DP
NPX 1211 XP
NPX 1511 XP
NPX 1813 XP
TORRENS 1211 LP
TORRENS 1515 LP
TORRENS 2015 LP
TEXAS 1209 LP
TEXAS 1510 LP RA
TEXAS 1612 LP RA
TEXAS 2014 LP RA
LKX 1310 LP
LKX 1713 LP
LKX 1515 LP
LKX 2015 LP
TEKNA 1515 LP
TEKNA 2015 LP
TEKNA 2021 LP
HYPER L 1211 LP
HYPER L 1515 LP RA
HYPER L 2015 LP RA
HYPER L 2021 LP RA
HYPER T 2015 LP
HYPER T 2021 LP
HYPER T 2515 LP
HHP 1211 LP
HHP 1515 LP
HHP 2015 LP
HHP 2021 LP
HHPX-RC
THERMIC 5 HW
THERMIC 10 HW
THERMIC 17 WW/Silence
6.00
1.00
82
Gun
1/4
" - M
22
S6.
001.
0076
Gun
S’0
9 - w
ith q
uick
con
nect
ion
S
6.60
1.00
02G
un R
L 37
3/8"
M -
M22
with
pre
ssur
e re
gula
tor
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
3.70
0.00
36G
un 3
/8"
- M22
S
SS
SS
SS
SS
SS
SS
OO
OO
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
6.00
1.00
89G
un S
’10
Y - w
ith q
uick
con
nect
ion
SS
SS
3.70
0.00
36G
un 3
/8»
- M22
S3.
700.
0025
*G
un R
L 30
3/8"
M -
1/4"
F O
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
O3.
700.
0022
Gun
RL
55 3
/8"M
- M
24S
SS
6.60
1.00
01G
un P
RO S
’10
3/8
"M -
with
qui
ck c
onne
ctio
nS
SS
SO
OO
SS
SS
SS
SS
SS
SS
SS
SS
SO
SS
6.60
1.00
03G
un P
RO S
’10
3/8
"M -
with
radi
o co
ntro
l and
lanc
eS
4.61
8.00
49H
. P. h
ose
8 m
- 3/
8" M
22 -
Ø 1
/4"
SS
SS
SS
SS
SS
4.61
8.01
43H.
P. ho
se 1
0 m
- 3/8
" - Ø
5/1
6" w
ith ro
tating
coup
ling 3
/8" -
310
bar
SS
SS
SS
SS
SS
SO
OO
OS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
4.61
8.01
53H.
P. ho
se 2
0 m
- 3/8
" - Ø
5/1
6" w
ith ro
tating
coup
ling 3
/8" -
310
bar
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
O4.
618.
0012
H. P
. hos
e 10
m -
3/8"
- 3/
8" -
Ø 5
/16"
- 31
0 ba
rS
SS
SS
S4.
618.
0056
H. P
. hos
e 20
m -
3/8"
- Ø
5/1
6" -
400
bar
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
O4.
618.
0057
H. P
. hos
e 20
m -
3/8"
- Ø
3/8
" - 4
00 b
arO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
4.61
8.00
58H.
P. h
ose
for f
ood
indu
stry
10 m
-3/8
"- Ø
3/8
" - 4
00 b
arO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
4.61
8.00
59H
. P. s
team
hos
e - 3
/8"
- Ø 3
/8"
MA
X 13
5°C
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
O4.
618.
0128
H. P
. hos
e 8
m -
Ø 1
/4S
S4.
618.
0020
H. P
. hos
e 10
m -
3/8"
- Ø
5/1
6 - 4
00 b
ar 5
/16'
'S
4.61
8.00
53H
. P. h
ose
10 m
- 3/
8" -
Ø 1
/4 -
210
bar
SS
S4.
018.
0003
H. P
. hos
e 8
m -
Ø 1
/4S
4.61
8.00
50H
. P. h
ose
10 m
- 3/
8" -
3/8"
- Ø
3/8
" - 4
00 b
arS
S4.
018.
0105
H. P
. hos
e 10
m -
3/8"
- 1/
4"F
- Ø 1
/4"
- 210
bar
S4.
618.
0166
H. P
. hos
e 10
m -
1/4»
- 23
0 ba
rS
4.01
8.00
95
H. P
. hos
e 6
m -
quic
k co
uplin
gS
6.60
8.00
19H
ose
reel
kit
for N
PXO
OO
O6.
608.
0018
Hos
e re
el k
it fo
r LK
XO
OO
OO
OO
OO
O6.
608.
0010
Hos
e re
el k
it fo
r TE
KNA
OO
OO
OO
OO
OO
O6.
608.
0022
Hos
e re
el k
itO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
O
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
O
OO
6.60
8.00
53H
ose
reel
kit
for
MIC
HIG
AN
OO
OO
OO
OO
O6.
608.
0017
Hos
e re
el k
it fo
r C
OLU
MBI
AO
OO
OO
OO
OO
6.60
8.00
21H
ose
reel
kit
for
DA
NU
BIO
OO
OO
6.60
8.00
57H
ose
reel
kit
for
GA
RAG
EO
3.74
9.04
81A
utom
atic
hos
e re
el w
ithou
t hos
eO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
3.74
9.04
82A
utom
atic
hos
e re
el w
ith h
ose
20 m
3/8
"O
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
6.60
2.00
35Pr
ofes
sion
al fi
xed
brus
h M
22O
OO
OO
OO
OO
OO
OO
XX
XX
OO
OO
OX
XX
OO
OO
OO
OX
XO
OO
OO
OO
OO
OO
OO
OX
XX
XX
OX
XX
XX
XX
XX
XX
OX
6.60
2.00
36Pr
ofes
sion
al r
otar
y br
ush
M22
OO
OO
OO
OO
OO
OO
OX
XX
XO
OO
OO
XX
XO
OO
OO
OO
XX
OO
OO
OO
OO
OO
OO
OO
XX
XX
XO
XX
XX
XX
XX
XX
XO
X6.
603.
0004
Rota
ry b
rush
M22
OO
OO
OO
OO
OO
OO
OX
XX
XO
OO
OO
XX
XO
OO
OO
OO
XX
OO
OO
OO
OO
OO
OO
OO
XX
XX
XO
XX
XX
XX
XX
XX
XO
X
3.10
0.00
433/
8» M
rot
atin
g qu
ick
coup
ling
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
SO
SO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
SS
3.74
9.02
58M
24 3
/8"M
rot
atin
g qu
ick
coup
ling
SS
3.10
0.00
233/
8"- 3
/8"
hose
cou
plin
gO
OO
OO
OO
OO
OO
4.60
6.00
533/
8"- M
22 h
ose
coup
ling
OO
OO
OO
OO
OO
OO
4.00
6.00
621/
4" -
M22
hos
e co
uplin
gO
OO
O3.
100.
0018
1/2"
- 3/8
” ho
se c
oupl
ing
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
O
Acc
esso
ries
S =
stand
ard
equi
pmen
t O
= o
ptio
nal
Ø =
in c
ombi
natio
n w
ith M
24 n
ippl
e co
de 3
.749
.032
0
X =
with
ada
pter
cod
e 3.
749.
0476
* =
in c
ombi
natio
n w
ith la
nce
3.50
1.00
30/3
1/32
- 3.
501.
0025
/26/
27 -
3.70
1.00
20
54
RENO 1315
PARTNER LP
CALIFORNIA 1109 LP
OREGON 1509 XP
LMX 1211 XP/ 1509 XP
LMX 2007 XP
LMX 1713 XP/ 2011 XP
ARIZONA 1209 LP
GARAGE 1211 LP/ 1612 LP
DANUBIO 1211 LP
DANUBIO 1510 LP/ 1612 LP
DANUBIO 1515 LP
DANUBIO 2015 LP
MICHIGAN 1211 LP RA
MICHIGAN 1515 LP R
MICHIGAN 2015 LP RA
MICHIGAN 2021 LP RA
MICHIGAN 2515 LP RA
COLUMBIA 1211 LP
COLUMBIA 1515 LP RA
COLUMBIA 2015 LP RA
COLUMBIA 2021 LP RA
MCHP 1211 LP
MCHP 1515 LP
MCHP 2015 LP
MCHP 2021 LP
HYPER C 1211 LP E
HYPER C 1515 LP RA
HYPER C 2015 LP RA
HYPER C 2021 LP RA
HYPER C 2515 LP RA
MAGNUM 2030 LP
MAGNUM 3317 LP
THERMIC 5H
INDEPENDENT 2800
THERMIC 9
THERMIC 10 D
THERMIC 11H
THERMIC 13H 2518
MISSISSIPI 1310 XP
MISSISSIPI 1310 XP DP
NPX 1211 XP
NPX 1511 XP
NPX 1813 XP
TORRENS 1211 LP
TORRENS 1515 LP
TORRENS 2015 LP
TEXAS 1310 LP
TEXAS15150 LP RA
TEXAS 1612 LP RA
TEXAS 2015 LP RA
LKX 1310 LP
LKX 1515 LP
LKX 1713 LP
LKX 2015 LP
TEKNA 1515 LP
TEKNA 2015 LP
TEKNA 2021 LP
HYPER L 1211 LP
HYPER L 1515 LP RA
HYPER L 2015 LP RA
HYPER L 2021 LP RA
HYPER T 2015 LP
HYPER T 2021 LP
HYPER T 2515 LP
HHP 1211 LP
HHP 1515 LP
HHP 2015 LP
HHP 2021 LP
HHPX-RC
THERMIC 5 HW
THERMIC 10 HW
THERMIC 17 HW/Silence
3.70
1.00
15m
m.7
00 1
/8"F
hig
h/lo
w pr
ess.
(for d
eterg
ent s
uctio
n) la
nce
SS
SS
SS
SS
SS
OS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
3.70
8.00
01m
m.7
00 la
nce
with
noz
zle-
hold
er 1
/8"F
S
6.60
2.00
26M
22 h
igh/
low
pre
ss. (
for
dete
rgen
t suc
tion)
lanc
eS
6.60
2.00
38M
22 la
nce
with
noz
zle-
hold
erS
6.00
2.03
22M
22 la
nce
with
noz
zle q
uick
conn
ectio
n +
5.01
2.02
81 5
noz
zles
SS
SS
SS
6.00
2.03
25M
22 la
nce
with
noz
zle q
uick
conn
ectio
n +
5.01
2.02
82 5
noz
zles
S6.
602.
0049
high
/low
pre
ss. (
for
dete
rgen
t suc
tion)
S/S
lanc
e 1/
4" M
O
1O
1O
1O
1O
1O
1O
1O
1O
1O
1O
1O
2O
2O
2O
2O
1O
1O
1O
1O
1O
2O
2O
2O
1O
1O
1O
1O
1O
1O
1O
2O
2O
1O
1O
1O
1O
1O
1O
2O
2O
1O
1O
1O
1O
1O
2O
1O
2O
2O
2O
2O
1O
2O
2O
2O
2O
2O
2O
2O
2O
2O
2O
1O
2O
26.
602.
0050
S/S
lanc
e w
ith n
ozzl
e-ho
lder
1/4
" M
mm
.170
0 O
1O
1O
1O
1O
1O
1O
1O
1O
1O
1O
1O
2O
2O
2O
2O
1O
1O
1O
1O
1O
2O
2O
2O
1O
1O
1O
1O
1O
1O
1O
2O
2O
1O
1O
1O
1O
1O
1O
2O
2O
1O
1O
1O
1O
1O
2O
1O
2O
2O
2O
2O
1O
2O
2O
2O
2O
2O
2O
2O
2O
2O
2O
1O
2O
23.
701.
0020
mm
105
0 - M
24 S
/S la
nce
with
noz
zle-
hold
erS
S3.
701.
0021
mm
105
0 - 1
/4"
M S
/S la
nce
with
noz
zle-
hold
erS
6.60
2.00
43m
m 9
00 la
nce
with
qui
ck c
onne
ction
1/8"
F w
ithou
t was
her
SS
SO
OO
SS
SS
SS
SS
6.60
2.00
44m
m 9
00 la
nce
with
qui
ck c
onne
ctio
n1/8
"F w
ith w
ashe
rS
SS
SS
OO
OS
SS
SS
SS
S
6.60
2.00
06M
22 Tu
rbo
lanc
e Ro
tom
ax 1
O6.
602.
0040
mm
500
M22
turb
o la
nce
045
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
6.60
2.00
41m
m 5
00 M
22 tu
rbo
lanc
e 05
5O
ØO
Ø6.
602.
0042
mm
500
M22
turb
o la
nce
07O
O6.
602.
0048
mm
700
1/4
” qu
ick
coup
ling
lanc
e O
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
O
3.74
9.02
95Tu
rbo
lanc
e no
zzle
UR
20 0
45 1
/4"
FO
3O
3O
3O
3O
3O
3O
3O
3O
3O
3O
3O
33.
749.
0466
Turb
o la
nce
nozz
le U
R 20
055
1/4
" F
O3
O3
O3
O3
O3
O3
O3
O3
O3
O3
3.74
9.04
67Tu
rbo
lanc
e no
zzle
UR
20 0
70 1
/4”
FO
3O
3O
3O
3O
36.
608.
0049
Sand
bla
sting
hea
d ki
t 040
with
pro
be
O3
O3
O3
O3
O3
O3
O3
O3
O3
O3
O3
6.60
8.00
50Sa
nd b
lasti
ng h
ead
kit 0
50 w
ith p
robe
O
3O
3O
3O
3O
3O
3O
3O
3O
3O
36.
608.
0051
Sand
bla
sting
hea
d ki
t 070
with
pro
be
O3
O3
O3
O3
6.60
2.00
03In
dire
ct fo
am la
nce
M22
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
O6.
602.
0051
Foam
inje
ctor
lanc
e w
ith r
egul
ator
and
pla
sticb
bot
tleO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
3.10
3.00
353/
8» P
rofe
ssio
nal p
ipe
clea
ning
noz
zle
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
6.60
8.00
4710
m -
Prof
essio
nal p
ipe
clean
ing
kit w
ith q
uick
con
necti
onO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
O6.
608.
0048
20 m
- Pr
ofes
siona
l pip
e cle
anin
g ki
t with
qui
ck c
onne
ction
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
6.60
8.00
5410
m -
Prof
essi
onal
pip
e cl
eani
ng k
itO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
O6.
608.
0055
20 m
- Pr
ofes
sion
al p
ipe
clea
ning
kit
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
3.10
2.00
11W
ater
filte
r 3/
4» F
- 3/
4» M
80
mic
rons
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
O
6.60
2.00
21S/
S ho
ses/
guns
qui
ck c
oupl
ing
seO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
6.60
8.00
033/
8 - 3
/8 b
rass
hos
es/g
uns
quic
k co
uplin
g se
tO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
6.60
8.00
021/
4 - 1
/4 b
rass
hos
es/g
uns
quic
k co
uplin
g se
tO
6.60
2.00
27M
22 0
40 W
idia
san
d-bl
astin
g la
nce
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
6.60
2.00
28M
22 0
50 W
idia
san
d-bl
astin
g la
nce
OØ
OØ
6.60
2.00
29M
22 0
75 W
idia
san
d-bl
astin
g la
nce
OO
S =
stand
ard
equi
pmen
t O
= o
ptio
nal
Ø =
in c
ombi
natio
n w
ith M
24 n
ippl
e co
de 3
.749
.032
0
X =
with
ada
pter
cod
e 3.
749.
0476
O1
= in
com
bina
tion
with
M22
nip
ple
cod.
4.0
06.0
099
O
2 =
in c
ombi
natio
n w
ith q
uick
con
nect
ion
code
3.7
49.0
474
O3
= in
com
bina
tion
with
lanc
e co
de 6
.602
.004
8
* =
in c
ombi
natio
n w
ith la
nce
3.50
1.00
30/3
1/32
- 3.
501.
0025
/26/
27 -
3.70
1.00
20
Hig
h-pr
essu
re c
lean
erH
igh-
pres
sure
cle
aner
Acc
esso
ries
55
Floor Cleaning Lance
Code 6.602.0020
operat. pressure 250 bar - 3625 psi
allowed pressure 280 bar - 4060 psi
operat. delivery rate 1200 l/h - 5,3 GPM
nominal temperature 160° C
nozzle dimension .060
Motorized head
Code 3.749.0196
operat. pressure 220 bar - 3190 psi
allowed pressure 250 bar - 3625 psi
operat. delivery rate 1260 l/h - 5,56 GPM
nominal temperature 90° C
min. diameter Ø 40 mm
nozzle type 2 x M4
Rotary Floor Cleaning Lance
Code 3.749.0188
operat. pressure 250 bar - 3625 psi
allowed pressure 280 bar - 4060 psi
operat. delivery rate 2400 l/h - 10,59 GPM
nominal temperature 80° C
nozzle type 1/4 Npt M
Motorized head
Floor Cleaning Lance
Rotary Floor Cleaning Lance
S/S prolonged adjustable probe Ø 21 for sand-blasting.
Sand-blasting head** nozzle G1/4”F max. 400 bar with internal tungsten carbide conveyor.
3.749.02073.749.02083.749.02093.749.0210
** Sand-blasting heads are not supplied with nozzles.Use them in combination with:code 3.749.0432 - 15050 nozzlecode 3.749.0433 - 15045 nozzlecode 3.749.0434 - 15040 nozzle
sand-blasting head nozzle max. 400 barround sand-blasting head nozzle max. 400 barextended sand-blasting head nozzle max. 400 barS/S prolonged adjustable probe
FOR EACH MODELS
High-pressure cleaner
56
Code Inlet Outlet Max. pressure Flow rate Temperature
A B bar psi MPa l/m GPM °C
3.703.0023 M22 Ø14 280 4061 28 30 7.93 160 320
3.703.0024 1/4” M 280 4061 28 30 7.93 160 320
3.703.0009 1/4” M 280 4061 28 30 7.93 160 320
Code Description Thread Type
3.103.0035 3/8”M 0.55
3.103.0105 3/8”M 0.55
3.103.0106 3/8”M 0.55
3.103.0107 0.55
3.103.0... 0.55
Code Pressure Flow rate Length Coupling Temperature
bar psi MPa l/m GPM mm A B °C
3.701.0025 250 3625 25 40 10.5 550 M22 Ø14 150 302
Code Pressure Flow rate Length Coupling Temperature
bar psi MPa l/m GPM mm A B °C
6.602.0052 250 3625 25 20 5.29 500 160 320
Water flow adjuster coupling
Pipe cleaning nozzles
Stainless steel floor cleaning lance with wheels (without nozzles)
Double lance with regulator knob
High-pressure cleaner
A
A
A
B
B
B
57
Code Pressure Flow rate Length Coupling Temperature
bar psi MPa l/m GPM min. mm max. mm A °C
3.749.0488 250 3625 25 40 10.5 2000 5000 3/8”M 150 302
Code Max. pressure Length Inlet Outlet Max. temperature
bar psi MPa m °C
4.618.0058 400 5801 40 10 150
Code Max. pressure Length Inlet Outlet Max. temperature
bar psi MPa m °C
4.618.0059 400 5801 40 10 135
Gun with extensible telescopic lance
Food hose R2 with rubber hose bend Ø 3/8”
Steam hose R2 with rubber hose bends Ø 3/8”
For food industry
For food industry
Code : 4.018.0067
Spare hose
Code : 3.100.0021
Coupling 1/4”M-1/4”M
Code : 3.100.0022
Coupling 1/4”M-3/8”M
Code : 6.002.0322Extension pipe
A:3/8”M
Quick coupling
+ +
High-pressure cleaner
Quick coupling code: 4.607.0275 + adapter for nozzle 1/4” code: 3.100.0032Quick coupling code: 4.607.0275 + adapter for nozzle 1/8” code: 3.100.0338
58
Wet & dry vacuum cleaners
Power, air suction, depressure: which technical data is mostimportant?
motor power and depression. Air
diameter, the least
Power motor is expressed in Watt and it is not proportional to vacuumefficiency!
Fixed or tilting trolley, which one to choose?
What kind of tank material is to be preferred?
What safety vacuum cleaners are?
59
Wet & dry vacuum cleaners
Power tool socket
M Class certificate for vacuum cleaner
H Class certificate for vacuum cleaner
*OEL
Number of motors:
motors there are in
depressure is steady whenever the motors are
Anti electrostatic current device
neutralizes on the user with small and
Paper collector filter
Cloth filter
Cartridge filter
area.
usable.
HEPA filter
Multipurpose washable filter
Filter shaker
AUTOMATIC ON/OFF
60
Vacuum cleaners
F = FixedR = Tilting
P = PlasticI = S/S
E = Tool socket
S = Filter shaker
H = Dust class HL = Dust class LM = Dust class M
Nomenclature
WhisperSahara Ares IW Zeus IFKronos IF Domus IF Domus IR Taurus PR
Code Model Page
Volta
ge
Motor
powe
r
Colum
n de
presio
n
Air su
ction
Tank
capa
city
Noise
leve
l
Pack
aging
L x l x
H
Pack
aging
weig
ht
Pack
aging
weig
ht
Piece
s for
palle
t
V - Hz W / W max kPa/mmH2O l/s l dB (A) cm kg lbs N°
8.223.0001 SAHARA 62 230V - 50Hz 1000 / 1200 26 / 2660 52 l/s 13 l 69 dB (A) 45x39x40 7 15 20
8.214.0501 WHISPER V8 63 230V - 50Hz 1100 / 1300 27 / 2700 56 l/s 15 l 55 dB (A) 49x39x42 9,5 20 20
8.225.0002 ARES IW 64 230V - 50Hz 1200 / 1400 22 / 2200 53 l/s 20 l 75 dB (A) 38x37x81 11 24 18
8.222.0522 KRONOS IF 65 230V - 50Hz 1200 / 1400 24 / 2400 54 l/s 35 l 71 dB (A) 47x47x62 11,5 25 18
8.215.0501 ZEUS IF 66 230V - 50Hz 1200 / 1400 24 / 2400 53 l/s 50 l 71 dB (A) 64x54x92 21,5 47 4
8.216.0502 DOMUS IF 67 230V - 50Hz 2000 / 2400 24 / 2400 108 l/s 78 l 74 dB (A) 75x60x103 30,5 67 4
8.213.0501 DOMUS IR 68 230V - 50Hz 2000 / 2400 24 / 2400 108 l/s 78 l 74 dB (A) 75x60x103 33,5 74 4
8.212.0508 TAURUS PR 69 230V - 50Hz 3000 / 3600 24 / 2400 162 l/s 77 l 76 dB (A) 75x60x103 32,5 71 4
61
Vacuum cleaners
Kronos IF ESM Zeus PF ESMTaurus IR Domus IR ESH Apollo IF Solaris IF Costellation
Code Model Page
Volta
ge
Motor
powe
r
Colum
n de
presio
n
Air su
ction
Tank
capa
city
Noise
leve
l
Pack
aging
L x l x
H
Pack
aging
weig
ht
Pack
aging
weig
ht
Piece
s for
palle
t
V - Hz W / W max kPa/mmH2O l/s l dB (A) cm kg lbs N°
8.212.0501 TAURUS IR 70 230V - 50Hz 3000 / 3600 24 / 2400 162 l/s 78 l 76 dB (A) 75x60x103 34,5 76 4
8.222.0534 KRONOS IF ESM 71 230V - 50Hz 1200 / 1400 24 / 2400 54 l/s 35 l 71 dB (A) 47x47x62 11 24 18
8.215.0525 ZEUS PF ESM 72 230V - 50Hz 1200 / 1400 24 / 2400 53 l/s 50 l 71 dB (A) 64x54x92 20 44 4
8.213.0514 DOMUS IR ESH 73 230V - 50Hz 2000 / 2400 24 / 2400 108 l/s 78 l 74 dB (A) 75x60x103 33,5 74 4
8.220.0501 APOLLO IF 74 230V - 50Hz 1200 / 1400 24 / 2400 53 l/s 50 l 71 dB (A) 64x54x92 24 53 4
8.221.0508 SOLARIS IF 75 230V - 50Hz 2200 / 2400 24 / 2400 108 l/s 78 l 74 dB (A) 75x60x103 37 82 4
8.221.0501 COSTELLATION IR 76 230V - 50Hz 2200 / 2400 24 / 2400 108 l/s 78 l 74 dB (A) 75x60x103 37 82 4
8.225.0009 ARES IW 64 110-120V - 50-60Hz 1200 / 1400 21,6 / 2200 53 l/s 20 l 75 dB (A) 38x37x81 11 24 18
8.222.0527 KRONOS IF 65 110-120V - 50-60Hz 1200 / 1400 23,6 / 2400 54 l/s 35 l 71 dB (A) 47x47x62 11,5 25 18
8.215.0506 ZEUS IF 66 110-120V - 50-60Hz 1200 / 1400 21,6 / 2200 53 l/s 50 l 71 dB (A) 64x54x92 21,5 47 4
8.216.0526 DOMUS IF 67 110-120V - 50-60Hz 2000 / 2400 22 / 2240 108 l/s 78 l 74 dB (A) 75x60x103 30,5 67 4
8.213.0516 DOMUS IR 68 110-120V - 50-60Hz 2000 / 2400 22 / 2240 108 l/s 78 l 74 dB (A) 75x60x103 33,5 74 4
Special voltage 220V & 380V~60 Hz60
Hz
62
69 dB (A)
Silenced
Dry vacuum cleaners
Standard Accessories:
5.209.0077 ø 35 - 2,5 m
3.753.0077 ø 35
3.753.0103 ø 35
3.754.0005 ø 35
3.754.0015 ø 35
3.754.0016 ø 35
3.754.0004 ø 35motor holder
Sahara
Accessory holder
Ergonomic handle
Shock and overturnproof design
300 mm
200 mm
280 mm
140 mm
SAHARA
Code 8.223.0001
N° / motor type
52 l/s
total volume / dust 13 l. / 8 l.
drain type manual
10 m
550/1000 mm
63
Standard Accessories:
5.209.0077 ø 35 - 2,5 m
3.753.0077 ø 35
3.753.0103 ø 35
3.754.0005 ø 35
3.754.0015 ø 35
3.754.0016 ø 35
3.754.0004 ø 35
holder
Whisper
Accessory holder
Full collector filter indicator.
Triple filtering system
Overturn proof
55 dB (A)
Ultrasilenced
300 mm
200 mm
280 mm
140 mm
WHISPER V8
Code 8.214.0501
N° / motor type
56 l/s
15 l. / 10 l.
drain type manual
10 m
550/1000 mm
Dry vacuum cleaners
64
Standard Accessories:
5.209.0077 ø 35 - 2,5 m
3.753.0077 ø 35
3.753.0009 ø 35
3.754.0005 ø 35
3.754.0015 ø 35
3.754.0004 ø 35
3.754.0168 ø 35
3.754.0169
3.754.0170
2x 491 mm
300 mm
300 mm
300 mm
300 mm
200 mm
140 mm
Ares IW
S/S tank
Shock proof trolley.
ARES IW
Code 8.225.0002
N°/motor type
by-pass
53 l/s
20 l. / 14 l. / 16 l.
standard
7 m
Wet & Dry vacuum cleaners
61
65
Wet & Dry vacuum cleaners
Standard Accessories:
5.209.0077 ø 35 - 2,5 m
3.753.0077 ø 35
3.753.0009 ø 35
3.754.0005 ø 35
3.754.0015 ø 35
3.754.0168 ø 35
3.754.0169
3.754.0170
2x 491 mm
300 mm
300 mm
300 mm
300 mm
250 mm
Kronos IF
S/S tank
Shock proof trolley.
Quick connection
KRONOS IF
Code 8.222.0522
N°/motor type
by-pass
54 l/s
35 l. / 18 l. / 20 l.
standard
7 m
61
66
Standard Accessories:
5.209.0021 ø 40 - 2,5 m
6.205.0126 ø 40
3.754.0048 ø 40
3.754.0049 ø 40
3.754.0185 ø 40
3.754.0169
3.754.0170
640 mm
670 mm
300 mm
300 mm
300 mm
250 mm
Zeus IF
Quick connection
S/S tank
Shock proof trolley.
Professionalclosing hook
ZEUS IF
Code 8.215.0501
N°/motor type
by-pass
53 l/s
50 l. / 21 l. / 35 l.
hose Ø 28 mm
10 m
Wet & Dry vacuum cleaners
61
67
Wet & Dry vacuum cleaners
Standard Accessories:
5.209.0021 ø 40 - 2,5 m
6.205.0126 ø 40
3.754.0048 ø 40
3.754.0049 ø 40
3.754.0083 ø 40
3.754.0084
3.754.0085
640 mm
670 mm
400 mm
400 mm
400 mm
250 mm
Domus IF
DOMUS IF
Code 8.216.0502
N°/motor type
by-pass
108 l/s
78 l. / 35 l. / 48 l.
hose Ø 28 mm
10 m
Shock proof trolley.
S/S tank
Quick connection
Professionalclosing hook
61
68
Standard Accessories:
5.209.0021 ø 40 - 2,5 m
6.205.0126 ø 40
3.754.0048 ø 40
3.754.0049 ø 40
3.754.0083 ø 40
3.754.0084
3.754.0085
640 mm
670 mm
400 mm
400 mm
400 mm
250 mm
Shock proof trolley.
Domus IR
S/S tank
Tank release
DOMUS IR
Code 8.213.0501
N°/motor type
by-pass
108 l/s
78 l. / 35 l. / 48 l.
10 m
Quick connection
Professionalclosing hook
Wet & Dry vacuum cleaners
61
69
Wet & Dry vacuum cleaners
Standard Accessories:
5.209.0021 ø 40 - 2,5 m
6.205.0126 ø 40
3.754.0048 ø 40
3.754.0049 ø 40
3.754.0083 ø 40
3.754.0084
3.754.0085
640 mm
670 mm
400 mm
400 mm
400 mm
250 mm
Taurus PR
Shock proof trolley.
Shock proof tank (PP)
TAURUS PR
Code 8.212.0508
N°/motor type
by-pass
162 l/s
t 77 l. / 34 l. / 47 l.
10 m
Tank release
Quick connection
Professionalclosing hook
70
Standard Accessories:
5.209.0021 ø 40 - 2,5 m
6.205.0126 ø 40
3.754.0048 ø 40
3.754.0049 ø 40
3.754.0083 ø 40
3.754.0084
3.754.0085
640 mm
670 mm
400 mm
400 mm
400 mm
250 mm
Taurus IR
Quick connection
Shock proof trolley.
Professionalclosing hook
S/S tank Tank release
TAURUS IR
Code 8.212.0501
N°/motor type
by-pass
162 l/s
78 l. / 35 l. / 48 l.
10 m
Wet & Dry vacuum cleaners
71
Wet & Dry vacuum cleaners
Kronos IF-ESM
Quick connection
Filter shaker S/S tank
Shock proof trolley.
KRONOS IF ESM
Code 8.222.0534
N°/motor type
by-pass
54 l/s
35 l. / 18 l. / 20 l.
M
standard
7 m
AUTOMATIC ON/OFF
Standard Accessories:
5.209.0127 ø 40 - 4 m
6.205.0126 ø 40
3.754.0048 ø 40
3.754.0049 ø 40
3.754.0185 ø 40
3.754.0169
3.754.0170
640 mm
670 mm
250 mm
300 mm
300 mm
300 mm
SPECIAL DUSTSFILTER
72
Zeus PF ESM
Quick connection
Filter shaker
Shock proof trolley
Shock proof tank (PP)
ZEUS PF ESM
Code 8.215.0525
N°/motor type
by-pass
53 l/s
50 l. / 21 l. / 35 l.
M
standard
10 m
AUTOMATIC ON/OFF
Standard Accessories:
5.209.0127 ø 40 - 4 m
6.205.0126 ø 40
3.754.0048 ø 40
3.754.0049 ø 40
3.754.0185 ø 40
3.754.0169
3.754.0170
640 mm
670 mm
250 mm
300 mm
300 mm
300 mm
SPECIAL DUSTSFILTER
Wet & Dry vacuum cleaners
73
Wet & Dry vacuum cleaners
Domus IR - ESH
Quick connection
Shock proof trolley.
Professionalclosing hook
S/S tank Tank release
Filter shaker
DOMUS IR ESH
Code 8.213.0514
N°/motor type
by-pass
108 l/s
78 l. / 35 l. / 48 l.
standard
10 m
AUTOMATIC ON/OFF
Standard Accessories:
5.209.0127 ø 40 - 4 m
6.205.0126 ø 40
3.754.0048 ø 40
3.754.0049 ø 40
3.754.0183 ø 40
3.754.0084
3.754.0085
640 mm
670 mm
250 mm
400 mm
400 mm
400 mm
SPECIAL DUSTSFILTER
74
Standard Accessories:
6.205.0129 ø 40 - 2,5 m
6.205.0132 ø 40
5.209.0143 ø 40
640 mm
670 mm
240 mm
Apollo IF
Quick connection
Shock proof trolley.
Professionalclosing hook
External detergent tank
S/S tank
90 mm
APOLLO IF
Code 8.220.0501
N°/motor type
53 l/s
50 l. / 21 l. / 35 l.
3,5 bar
11 l.
hose Ø 28 mm
Vacuum cleaners - Injection extraction
75
Vacuum cleaners - Injection extraction
Standard Accessories:
6.205.0129 ø 40 - 2,5 m
6.205.0132 ø 40
5.209.0143 ø 40
640 mm
670 mm
240 mm
90 mm
Solaris IF
Quick connection
Shock proof trolley.
Professionalclosing hook
External detergent tank
S/S tank
SOLARIS IF
Code 8.221.0508
N°/motor type
108 l/s
78 l. / 35 l. / 48 l.
2x 48w - 0,7-1,2 l/min
5 bar
25 l.
hose Ø 28mm
76
Vacuum cleaners - Injection extraction
Standard Accessories:
6.205.0129 ø 40 - 2,5 m
6.205.0132 ø 40
5.209.0143 ø 40
640 mm
670 mm
240 mm
90 mm
Costellation IR
Quick connection
Shock proof trolley.
Professionalclosing hook
S/S tank
Tank release
External detergent tank
COSTELLATION IR
Code 8.221.0501
N°/motor type
108 l/s
78 l. / 35 l. / 48 l.
2 x 48w - 0,7-1,2 l/min
5 bar
11 l.
77
Saha
ra
Whi
sper
V8
Are
s IW
Kro
nos
IF
Zeus
IF
Dom
us IF
Dom
us IR
Taur
us P
R
Taur
us IR
Kro
nos
IF E
SM
Zeus
PF
ESM
Dom
us IR
ESH
Apo
llo IF
Sola
ris
IF
Cost
ella
tion
IR
5.209.0021 O O O5.209.00775.209.01275.209.0082 O O O O O6.205.0126
3.753.0019 O O O O O O O O
3.753.0020 O O O O O O O O6.205.0109 extension pipe O O
3.753.0039 O O O O O O O O
3.753.0084 Ø 35 – 1m. PVC extensible O O O O3.753.0103 O O
3.754.0048 O O O3.754.0005
3.754.0049 Ø 40 - round brush O O O3.754.0015 Ø 35 - round brush
3.754.0083 O O O O3.754.0168 O O3.754.0185
3.754.0084 O O O O3.754.0169 O O
3.754.0085 wet tool 400mm O O O O3.754.0170 wet tool 300mm
3.754.0086 O O O O O O O O3.754.0171 O O O O O
3.754.0046 O O O O O O O O3.752.0028 O O O O3.754.0208 O O O3.754.0047 O O O O O O O O3.752.0118 O O O O3.754.0209 O O O
Wet & dry vacuum cleaners
Accessories
78
Saha
ra
Whi
sper
V8
Are
s IW
Kro
nos
IF
Zeus
IF
Dom
us IF
Dom
us IR
Taur
us P
R
Taur
us IR
Kro
nos
IF E
SM
Zeus
PF
ESM
Dom
us IR
ESH
Apo
llo IF
Sola
ris
IF
Cost
ella
tion
IR
3.753.0038 O O O O O O O O3.753.0063 O O O O3.753.0050 O O O
0.110.0062 O O O O0.911.0210 O O O O0.911.0211 O O O O
6.205.01296.205.0130 O O O6.205.0131 O O O
6.205.0132
5.209.01435.209.0142
3.753.0077
3.754.0016 O O3.754.0205 O O O O
3.754.0004 Ø 35 – 140 mm nozzle O
3.754.0080 O O O O
3.754.0081 O O O O
0.110.0021 O O O O O O
0.110.0020 O O O O O O O O
5.509.0039 O6.205.00085.212.0043 O5.209.0105 O
Wet & dry vacuum cleaners
Accessories
79
Saha
ra
Whi
sper
V8
Are
s IW
Kro
nos
IF
Zeus
IF
Dom
us IF
Dom
us IR
Taur
us P
R
Taur
us IR
Kro
nos
IF E
SM
Zeus
PF
ESM
Dom
us IR
ESH
Apo
llo IF
Sola
ris
IF
Cost
ella
tion
IR
5.509.1405 O O O O O O
5.212.0093 O O O O O O5.212.0094 O O
5.212.0022 O O O O O O O O O O5.212.0023 O O5.212.0048 O O O
5.212.0006 O O O O3.752.00933.752.0085
3.752.0092 O3.752.0086 O
5.212.0010 O O O O5.212.0034 O O O O O O
5.212.0020 O O O O
5.212.0021 O O O O O
3.752.0073 O O3.752.0082 O O O O O
6.205.0011 O
6.205.0106 O O6.205.0107 O
Multipurpose washable filters
Wet & dry vacuum cleaners
Accessories
80
Industrial Wet & Dry Vacuum Cleaners
When working conditions and dirt type are extreme, dangerous or difficult to manage, then the VLP range is the solution to all the problems. Innovative filtering systems, liquid waste management, toughness construction and (for some models) the possibility to work with dangerous dusts, set new standards in the industrial sector regarding extensive working expectation, productivity, filtering capacity and efficiency.
Why wider filtering area is not making automatically a better machine?
And with this issue, we are the best.
When either more airflow or more depressure is necessary?
What are safety vacuums?
81
Industrial Wet & Dry Vacuum Cleaners
Cyclonic vacuuming system (international copyright)
very low.
Pneumatic filter shaker (international copyright)
Automatic liquid draining
not in use, the
it is possible to push
Antistatic machines and accessories
ATEX (ATmospheres EXplosibles) vacuum certificate
TYPE 22 vacuum certificate
potential explosive air/dust mixture.
will be installed
amendments is
the user.
Compressed air operating vacuum
*OEL it is a value
Type of explosive atmospheres G area 0,1 and 2D area 20,21 and 22
82
Industrial Wet & Dry Vacuum Cleaners
S = Universal (motor)D = Induction (motor)P = Pneumatic
Liters(tank)
n° Motor
x 100 =2400 W
Filter shaker
Dust classM = Single phase (motor)T = Tri-Phase (motor)V = Varnishing (tank)X = S/S (tank)
Nomenclature
SMV77 2-24SMX77 2-24SMV77 3-36SMX77 3-36
SMV50 2-24 SMSMX50 2-24
DMX80 1-22 DTX 80 1-30
Code Model Abs
. Pow
er
Colu
mn
depr
essio
n
Noi
se le
vel
V~Hz (Ph) W kPa l/s l dB(A) cm² cm L x l x H kg lbs n°
0.056.0001 SMV77 2-24 84 230 V~50 Hz (1Ph) 2000 24 kPa 108 l/s 77 l. 74 dB(A) 4300 cm² 70x91x141 66 145,5 1
0.056.0002 SMX77 2-24 84 230 V~50 Hz (1Ph) 2000 24 kPa 108 l/s 77 l. 74 dB(A) 4300 cm² 70x91x141 66 145,5 1
0.056.0003 SMV77 3-36 84 230 V~50 Hz (1Ph) 3000 24 kPa 162 l/s 77 l. 76 dB(A) 4300 cm² 70x91x141 67 147,7 1
0.056.0004 SMX77 3-36 84 230 V~50 Hz (1Ph) 3000 24 kPa 162 l/s 77 l. 76 dB(A) 4300 cm² 70x91x141 67 147,7 1
0.044.0201 SMV50 2-24 SM 85 230 V~50 Hz (1Ph) 2400 22.6 kPa 83 l/s 50 l. <70 dB(A) 15000 cm² 70x90x151 79,6 175,4 1
0.044.0102 SMX50 2-24 85 230 V~50 Hz (1Ph) 2400 22.6 kPa 83 l/s 50 l. <70 dB(A) 15000 cm² 70x90x151 79,6 175,4 1
NEW
83
Industrial Wet & Dry Vacuum Cleaners
DTX100 1-30 DTX50 1-30 Ex TYPE22DTX70 1-30 SH DTX70 1-30 Ex TYPE22
Code Model Abs
. Pow
er
Colu
mn
depr
essio
n
Noi
se le
vel
V~Hz (Ph) W kPa l/s l dB(A) cm² cm L x l x H kg lbs n°
0.045.0031 DMX 80 1-22 86 230 V~50 Hz 2200 32 kPa 97 l/s 80 <74 dB(A) 4300 cm² 50x50x140 80 176 1
0.045.0032 DTX 80 1-30 86 400 V~50 Hz (3Ph) 3000 32 kPa 97 l/s 80 <74 dB(A) 4300 cm² 50x50x140 85 187 1
0.045.0203 DTV70 1-30 SH 87 400 V~50 Hz (3Ph) 3000 31.4 kPa 89 l/s 70 l. <74 dB(A) 12000 cm² 70x90x202 141,4 311,7 1
0.045.0004 DTX100 1-30 88 400 V~50 Hz (3Ph) 3000 31.4 kPa 89 l/s 100 l. <74 dB(A) 15000 cm² 70x90x202 141,4 311,7 1
0.045.0219 DTX50 1-30 Ex TYPE 22 89 400 V~50 Hz (3Ph) 2600 22.6 kPa 89 l/s 50 l. <74 dB(A) 15000 cm² 70x90x152 103 227,1 1
0.045.0217 DTX70 1-30 Ex TYPE 22 89 400 V~50 Hz (3Ph) 2600 31.4 kPa 89 l/s 70 l. <74 dB(A) 24000 cm² 70x90x202 141,4 311,7 1
84
Industrial Wet & Dry Vacuum Cleaners
Optional:
Standard Accessories:
SMV 77SMX 77
Accessory storagefacility
Manual filtershaker
Non-overturning steel structure.
SMV:Epoxy varnishing
SMX:AISI 304 Stainless SteelSteering polyurethane
antistain wheels with brake
SMV77 2-24 SMX77 2-24 SMV77 3-36 SMX77 3-36
0.056.0001 0.056.0002 0.056.0003 0.056.0004
2000 2000 3000 3000
n° / type motor
108 l/s 108 l/s 162 l/s 162 l/s
77 l / 45 l / 50 l 77 l / 45 l / 50 l 77 l / 45 l / 50 l 77 l / 45 l / 50 l
noise level
7,5 m 7,5 m 7,5 m 7,5 m
85
Industrial Wet & Dry Vacuum Cleaners
SMV 50 SMSMX 50
Accessory storagefacility
Automatic filter shaker
Non-overturning steel structure.
Collector tanklifting lever
SMV:Epoxy varnishingSMX:AISI 304 Stainless Steel
Steering polyurethane antistain
wheels with brake
Optional:
Standard Accessories:
SMV50 2-24 SM SMX50 2-24
0.044.0201 0.044.0102
2400 2400
n° / type motor
83 l/s 83 l/s
50 l / 30 l / 35 l 50 l / 30 l / 35 l
noise level
10 m 10 m
86
Industrial Wet & Dry Vacuum Cleaners
DMX80 1-22 DTX80 1-30
0.045.0031 0.045.0032
2200 3000
n° / type motor
97 l/s 97 l/s
80/36/49 lt 80/36/49 lt
noise level
10 m 10 m
motor.
DMX80DTX80
Turbine room
Professional closing hooks
Steel frame
Epoxy varnishing
Steering wheels with brake
Stainless steel
Drain hose
Optional:
Kit 6.205.0115
ø 40
ø 40
ø 40
Carpet tool
640 mm
670 mm
400 mm
400 mm
400 mm
400 mm
Standard accessories:
ø 40 - 3 m
ø 40250 mm
NEW
87
Industrial Wet & Dry Vacuum Cleaners
DTV 70 SH
Optional:
DTV70 1-30 SH
0.045.0203
3000
n° / type motor
89 l/s
70 l / 45 l / 60 l
noise level
10 m
Accessory storagefacility
Automatic filter shaker
Non-overturning steel structure.
Collector tanklifting lever
DMV: Epoxy varnishingDMX: AISI 304 Stainless Steel
Steering polyurethane antistain
wheels with brake
Standard Accessories:
88
Industrial Wet & Dry Vacuum Cleaners
DTX100 1-30
0.045.0004
3000
n° / type motor
89 l/s
100 l / 70 l / 90 l
noise level
10 m
DTX100 1-30
Accessory storagefacility
Automatic filter shaker
Non-overturning steel structure.
Steering polyurethane antistain wheels with brake
Optional:
Standard Accessories:
No return valve
AISI 304 Stainless Steel
Collector tank lifting lever
Water unloadvalve
89
Industrial Wet & Dry Vacuum Cleaners
Optional:
DTX ExType 22
ATEX - TYPE 22 DTX50 1-30 Ex TYPE 22 DTX70 1-30 Ex TYPE 22
0.045.0219 0.045.0217
2600 2600
n° / type motor
89 l/s 89 l/s
50 l / 30 l / 35 l 70 l / 45 l / 60 l
noise level
10 m 10 m
Accessory storagefacility
Automatic filter shaker
Non-overturning steel structure.
Collector tanklifting lever
AISI 304 Stainless Steel
Standard Accessories:
AISI 304 Stainless Steel
90
SMV
77
2-2
4
SMX
77
2-2
4
SMV
77
3-3
6
SMX
77
3-3
6
SMV
50
2-2
4 S
M
SMX
50
2-2
4
DTV
70
1-3
0 S
H
DTX
100
1-3
0
DTX
50
1-3
0 E
x T
YPE2
2
DTX
70
1-3
0 E
x T
YPE2
2
0.144.0028 O O O
0.144.0045 O O O O O O
0.144.0046 O O O O O O
0.144.0033 O O O
0.144.0034 O
0.144.0035 O
0.144.0036 O
0.144.0037 O
0.144.0038 O
0.144.0039 O O
5.212.0034 O O O O
5.212.0021 O O O O
Accessories
Industrial Wet & Dry Vacuum Cleaners
3.09
9.10
770.
144.
0047
3.75
3.00
50 (E
VA C
ON
D. Ø
38
- min
5 m
. or m
ult.,
max
30
m.)
0.14
4.00
473.
099.
1077
0.14
4.00
111
- 2 -
3 - 5
- 6
- 7 -
9 - 1
0 - 1
1 - 1
2 - 1
3 - 1
4
3.09
9.10
770.
144.
0047
3.75
3.00
50 (E
VA C
ON
D. Ø
38
- min
5 m
. or m
ult.,
max
30
m.)
--
-4
3.09
9.10
770.
144.
0002
3.75
3.00
51 (E
VA C
ON
D. Ø
50
- min
5 m
. or m
ult.,
max
30
m.)
0.14
4.00
023.
099.
1077
0.14
4.00
111
- 2 -
3 - 5
- 6
- 7 -
9 - 1
0 - 1
1 - 1
2 - 1
3 - 1
4
3.09
9.10
770.
144.
0001
3.75
3.00
53 (P
UR A
NTIS
T. Ø
50
- min
5 m
. or m
ult.,
max
20
m.)
0.14
4.00
013.
099.
1077
0.14
4.00
111
- 2 -
3 - 5
- 6
- 7 -
9 - 1
0 - 1
1 - 1
2 - 1
3 - 1
4
3.09
9.10
770.
144.
0002
3.75
3.00
54 (P
UR A
NTIO
IL Ø
50
- min
5m
. or m
ult.,
max
60
m.)
0.14
4.00
023.
099.
1077
0.14
4.00
111
- 2 -
3 - 5
- 6
- 7 -
9 - 1
0 - 1
1 - 1
2 - 1
3 - 1
4
-0.
144.
0008
3.09
9.10
770.
144.
0047
3.75
3.00
50 (E
VA C
ON
D. Ø
38
- min
5 m
. or m
ult.,
max
30
m.)
0.14
4.00
473.
099.
1077
0.14
4.00
111
- 2 -
3 - 5
- 6
- 7 -
9 - 1
0 - 1
1 - 1
2 - 1
3 - 1
4
0.14
4.00
24-
2x -
3.09
9.10
772x
- 0.
144.
0047
3.75
3.00
50 (E
VA C
ON
D. Ø
38
- min
5 m
. or m
ult.,
max
30
m.)
2x -
0.1
44.0
047
2x -
3.09
9.10
772x
- 0.
144.
0011
1 - 2
- 3
- 5 -
6 - 7
- 9
- 10
- 11
- 12
- 13
- 14
-0.
144.
0008
3.09
9.10
770.
144.
0002
3.75
3.00
51 (E
VA C
ON
D. Ø
50
- min
5 m
. or m
ult.,
max
30
m.)
0.14
4.00
023.
099.
1077
0.14
4.00
111
- 2 -
3 - 5
- 6
- 7 -
9 - 1
0 - 1
1 - 1
2 - 1
3 - 1
4
--
-0.
144.
0007
3.75
3.00
52 (P
UR A
NTIS
T. Ø
40
- min
5 m
. or m
ul.,
max
20
m.)
0.14
4.00
03-
-15
- 16
0.14
4.00
24-
-2x
- 0.
144.
0003
3.75
3.00
52 (P
UR A
NTIS
T. Ø
40
- min
5 m
. or m
ul.,
max
20
m.)
2x -
0.14
4.00
03-
-15
- 16
-0.
144.
0008
3.09
9.10
770.
144.
0001
3.75
3.00
53 (P
UR A
NTIS
T. Ø
50
- min
5 m
. or m
ult.,
max
20
m.)
0.14
4.00
013.
099.
1077
0.14
4.00
111
- 2 -
3 - 5
- 6
- 7 -
9 - 1
0 - 1
1 - 1
2 - 1
3 - 1
4
-0.
144.
0008
3.09
9.10
770.
144.
0002
3.75
3.00
54 (P
UR A
NTIO
IL Ø
50
- min
5m
. or m
ult.,
max
60
m.)
0.14
4.00
023.
099.
1077
0.14
4.00
111
- 2 -
3 - 5
- 6
- 7 -
9 - 1
0 - 1
1 - 1
2 - 1
3 - 1
4
--
3.09
9.12
680.
144.
0052
3.75
3.00
87 (P
UR C
ON
D. Ø
70
- min
5m
. or m
ult.,
max
20
m.)
0.14
4.00
523.
099.
1268
-8
0.14
4.00
50
(Opt
iona
l)
0.15
6.00
19
(stan
dard
)
(stan
dard
)
Ø 7
0 m
m
Ø 5
0 m
m
Ø 5
0 m
mac
cess
orie
s pag
e 93
acce
ssor
ies p
age
93SM
V 50
2-2
4 SM
SMX
50 2
-24
DTV
70 1
-30
SH
DTX
100
1-30
DTX
50 1
-30
EX T
YPE2
2
DTX
70 1
-30
EX T
YPE2
2
SMV7
7 2-
24
SMX7
7 2-
24
SMV7
7 3-
36
SMX7
7 3-
36
EVA
CO
ND
UC
TIV
E
light
ness
and
flex
ibili
tyPU
R A
NTI
STAT
IC
light
ness
and
m
oder
ate
flexi
bilit
y
PUR
OIL
PRO
OF
Ant
ista
tic, o
il an
d ab
rasi
on p
roof
Acc
esso
ries
91
Indu
stri
al W
et &
Dry
Vac
uum
Cle
aner
sIn
dust
rial
Wet
& D
ry V
acuu
m C
lean
ers
SMV 77 2-24
SMX 77 2-24
SMV 77 3-36
SMX 77 3-36
SMV50 2-24 SM
SMX50 2-24
DTV 70 1-30 SH
DTX100 1-30
DTX50 1-30 Ex TYPE22
DTX70 1-30 Ex TYPE22
0.14
4.00
40w
asha
ble
filte
r 1 m
icron
(prim
ary-
stand
ard)
SS
SS
0.14
4.00
82w
asha
ble
filte
r 1 m
icron
(prim
ary-
High
er)
S
0.14
4.00
84He
pa fi
lter (
seco
ndar
y-sta
ndar
d)S
SS
0.14
4.00
83He
pa fi
lter (
seco
ndar
y-Hi
gher
)S
0.14
4.00
42da
nger
ous d
ust b
ag fi
lter (
1x 0
.144
.003
4 +
1x 0
.144
.003
5 +
1x 0
.144
.003
9 re
ques
ted)
O
0.14
4.00
43sm
all s
crap
tool
bag
filte
r (1x
0.1
44.0
034
+ 1x
0.1
44.0
035
requ
este
d)O
0.15
6.00
05ov
en c
ompl
ete
kit Ø
40
(flex
/ext
ensio
n pi
pe)
OO
OO
0.15
6.00
16kit
3 p
ieces
ove
n ex
tensio
n pi
pe Ø
40x
100c
mO
OO
O0.
156.
0026
heat
resis
tant
ext
.100
% in
sula
te Ø
40x
100c
mO
OO
O0.
156.
0027
heat
resis
tant
ext
.50%
insu
late
Ø 4
0x10
0cm
OO
OO
0.15
6.00
28he
at re
sista
nt e
xt. n
ot in
sula
te Ø
40x
100c
mO
OO
O0.
156.
0025
steel
flex
ove
n pi
peO
OO
O0.
156.
0022
heat
resis
tant
inox
tool
cm
40
Ø 4
0O
OO
O
0.15
6.00
03he
at re
sista
nt o
ven
filte
rO
OO
O
0.15
6.00
04te
flon
filte
rO
OO
O
5.50
9.00
39clo
th fi
lter
SS
SS
0.15
6.00
07ste
el jo
int c
oupl
ing
Ø 5
0O
OO
OO
OO
OO
0.15
6.00
08ste
el jo
int c
oupl
ing
Ø 7
0O
OO
OO
0.15
6.00
09ste
el jo
int c
oupl
ing
Ø 4
0O
OO
OO
OO
OO
Acc
esso
ries
S =
stand
ard
equi
pmen
t O
= o
ptio
nal
S =
stand
ard
equi
pmen
t O
= o
ptio
nal
SMV 77 2-24
SMX 77 2-24
SMV 77 3-36
SMX 77 3-36
SMV50 2-24 SM
SMX50 2-24
DTV70 1-30 SH
DTX100 1-30
DTX50 1-30 Ex TYPE22
DTX70 1-30 Ex TYPE22
0.15
6.00
21sta
inle
ss st
eel c
hip
bask
etO
OO
O
0.15
6.00
18ste
el re
ducti
on m
m 7
0-40
OO
OO
0.15
6.00
19ste
el re
ducti
on m
m 7
0-50
SS
SS
0.15
6.00
01ste
el c
yclo
ne c
one
OO
OO
0.15
6.00
02“L
” ste
el p
ipe
Ø 5
0 L 1
200
OO
OO
0.15
6.00
14ex
tens
ion
steel
pip
e 50
cm
Ø 5
0O
OO
O
0.15
6.00
12ny
lon
oven
cou
plin
gO
OO
O
0.14
4.00
85S/
S ta
nk w
ith p
ump
230V
50H
Z a
nd c
hip
bask
etO
0.14
4.00
86sta
inle
ss st
eel c
hip
bask
et fo
r tan
k w
ith p
ump
O
Acc
esso
ries
92
Indu
stri
al W
et &
Dry
Vac
uum
Cle
aner
sIn
dust
rial
Wet
& D
ry V
acuu
m C
lean
ers
93
Industrial Wet & Dry Vacuum Cleaners
1 0.144.0012 Ø 50 - steel double curve with joint coupling
2 0.144.0013 Ø 50 - steel extension with joint coupling
3 0.144.0014 Ø 50 - steel flat lance mm 500
4 0.156.0006 Ø 40 - steel flat lance mm 500
5 0.144.0021 Ø 50 - antistatic rubber conic lance
6 0.144.0022 Ø 50 - antistatic rubber conic bend lance
7 0.144.0015 Ø 50 - antistatic rubber round lance
8 0.144.0051 Ø 70 - antistatic rubber round lance
9 0.144.0019 Ø 50 - antistatic rubber suction lance
10 0.144.0026 Ø 50 - dust inox floor tool
11 0.144.0027 Ø 50 - wet inox floor tool
12 0.144.0025 Ø 50 - dust oval tool
13 0.144.0017 Ø 50 - PVC flat lance
14 0.144.0018 Ø 50 - PVC round brush
15 3.754.0048 Ø 40 - PVC flat lance
16 3.754.0049 Ø 40 - PVC round brush
Accessories
94
Single disc machines
Which are key components in a single disc machine?
The procedure to choose the right product for specific application must take into consideration of: the weight (that is the pressure over the brush), the surface to work, the RPM / type of construction of the motor and the transmission type.Generally speaking, the lower is the rotation speed, the most effective is the pressure over the brush and deeper is dirt removal.With the increasing of rotation speed, lower is the effect of the pressure over the floor.Different accessories combinations, rotation speed and motor power can provide the solution for any application: from dewaxing or deep scrub, up to polishing or buffing; from the crystallization up to spray cleaning; also carpet cleaning or sanding. Please see application chapter on the next pages.
How much power is necessary?
There is not a set rule, if not the common sense: higher is the friction over the floor (a combination of type of working, type of surface and type of accessory used), the higher will be the power request to the motor. So more powerful is the motor, the harder the job being able to be done.
The power is nothing without a control….
Together with its construction simplicity there are the worst danger for the operator who has to control the machine for long working sessions.Only the perfect components and weights distribution on the machine allows a perfect balanced and ergonomic working posture, without any vibration and any strange effort to keep it in place.A cheap construction (less strength) not considering the perfect ergonomic for the user, further to the waste of money (less productivity), it’s a serious danger for the health!
95
Single disc machines
Satellite planetary gearbox trnsmission:Up to 400 RPM the reduction and transmission system is made with satellite planetary gear.
Grants continuous power, long life and noiselessness of the machine.
Belt transmission:When the rotation speed is more than 1000 RPM, the necessary traction torque decreases and technically it is a better solution because it damps
the vibration of the rotary motion; assembling procedure and maintenance are easier.
Brush speed:Means Rotation Per Minute of the brush.
Vacuum system:Working at very high speed, a very fine dust is produced on the floor; it is collected in a collector tank, avoiding spreading in surrounding areas.
Pressure regulator:In order to obtain the best effect, it is possible to regulate the brush pressure on the floor.
SDM= Single Disc Machine
Transmission: G = gearbox / B = belt
RPM brush (1/10)
Scrubbing width
W motor (1/10)
SDM 35 G 15-100
Nomenclature
Application
Page
Code
Ø b
rush
Strip
ping
synt
hetic
floo
r (PV
C)
Strip
ping
cor
k pr
esen
t floo
r (lin
oleu
m)
Wet
scru
bbing
/bas
ic cle
aning
of s
tones
, tile
s and
lino
(sens
itive fl
oors)
Wet
scru
bbin
g/ba
sic c
lean
ing
of sy
n-th
etic
or n
on se
nsiti
ve fl
oors
pvc
Crys
talliz
ing
Carp
et sh
ampo
oing
Sand
ing
woo
d
Sand
ing
woo
d
Spra
y cle
anin
g
Spra
y po
lishi
ng a
nd b
uffin
g
SDM 35G 15-100 97 0.055.0201 330 - 13”
SDM 45G 15-130 97 0.055.0203 430 - 17”
SDM 45G 15-180 97 0.055.0204 430 - 17”
SDM 53G 15-180 97 0.055.0206 505 - 20”
SDM 45G 35-180 97 0.055.0207 430 - 17”
96
Single disc machines
Page
Abs
orbe
d po
wer
Scru
bbin
g w
idth
Brus
h sp
eed
Brus
h co
ntac
t pre
ssur
e
Han
dle
pack
agin
g di
men
sion
s
Han
dle
pack
agin
g w
eigh
t
Han
dle
pack
agin
g w
eigh
t
Body
pac
kagi
ng d
imen
sion
s
Body
pac
kagi
ng w
eigh
t
Body
pac
kagi
ng w
eigh
t
Piec
es fo
r pa
llet
Code Model W mm-inch RPM g/cm2 L x l x H cm Kg lbs L x l x H
cm Kg lbs n°
0.055.0201 SDM 35G 15-100 550 330 - 13" 154 36,7 38x13x109 5,50 12,12 42x38x25 19,50 42,99 24
0.055.0203 SDM 45G 15-130 1300 430 - 17" 154 40,8 38x14x114 6,80 14,99 56x46x31 41,00 90,38 16
0.055.0204 SDM 45G 15-180 1800 430 - 17" 154 41,3 38x14x114 6,80 14,99 56x46x31 42,00 92,59 16
0.055.0206 SDM 53G 15-180 1800 505 - 20" 154 34,9 38x14x114 6,80 14,99 56x46x31 48,00 105,82 12
0.055.0207 SDM 45G 35-180 1800 430 - 17" 350 44,3 38x14x114 6,80 14,99 56x46x31 46,50 102,51 16
SDM 45/53SDM 35
NEWNEW
97
Single disc machines
SDM 35 GSDM 45 GSDM 53 G
154
SDM 35G 15-100 SDM 45G 15-130 SDM 45G 15-180 SDM 45G 35-180 SDM 53G 15-180
code 0.055.0201 0.055.0203 0.055.0204 0.055.0207 0.055.0206
type low speed low speed low speed medium speed medium speed
brush speed 154 RPM 154 RPM 154 RPM 350 RPM 154 RPM
scrubbing width 330 mm 430 mm 430 mm 430 mm 505 mm
voltage 230V / 50HZ 230V / 50HZ 230V / 50HZ 230V / 50HZ 230V / 50HZ
abs. power 1000 W 1300 W 1800 W 1800 W 1800 W
transmission satellite planetary gearbox
brush contact pressure 36,7 g/cm² 40,8 g/cm² 41,3 g/cm² 44,3 g/cm² 34,9 g/cm²
noise level 54 dB(A) 54 dB(A) 54 dB(A) 56 dB(A) 54 dB(A)
cable lenght 10 m 12 m 15 m 15 m 15 m
body height 220 mm 280 mm 280 mm 280 mm 280 mm
dimensions / weight 42x34x112 cm / 28 Kg 54,2x42,5x120 cm / 36Kg 54,2x42,5x120 cm / 37 Kg 54,2x42,5x120 cm / 38 Kg 62,5x50,5x120 cm / 41 Kg
OPTIONALTank
OPTIONALbrush
Powerful andnoiseless motor
Ergonomic handle withintegrated safety controls
Strong handle joint
stripping.
and light.
Optional:
0.955.0001-10 l detergent tank0.955.0002 spray system
Accessories and brushes are not included. For available accessories refer to accessories pages.
planetary gearbox
350ModeiSDM 45G 35-180
NEW
98
Single disc machines
Description Code Models Strip
ping
synt
hetic
floo
r (PV
C)
Strip
ping
cor
k pr
esen
t floo
r (li
nole
um)
Wet
scru
bbing
/bas
ic cle
aning
of s
tones
, tile
s and
lino
(sens
itive fl
oors)
Wet
scru
bbin
g/ba
sic c
lean
ing
of
synt
hetic
or n
on se
nsiti
ve fl
oors
pvc
Crys
talliz
ing
Carp
et sh
ampo
oing
Sand
ing
woo
d
Sand
ing
cem
ent
Spra
y cle
anin
g
Spra
y po
lishi
ng a
nd b
uffin
g
BrushesCarpet brush 0.955.0013 SDM 35G xCarpet brush 0.955.0014 SDM 45G xCarpet brush 0.955.0020 SDM 53G xScrubbing brush PP 0,6 mm 0.955.0006 SDM 35G x xScrubbing brush PP 0,6 mm 0.955.0007 SDM 45G x xScrubbing brush PP 0,6 mm 0.955.0008 SDM 53G x xTynex brush 0.955.0003 SDM 35G x xTynex brush 0.955.0004 SDM 45G x xTynex brush 0.955.0005 SDM 53G x x
Pad Holder0.955.0015 SDM 35G x x x x x0.955.0016 SDM 45G x x x x x x x0.955.0021 SDM 53G x x x x x x0.955.0017 SDM 45G 40-160 x x
Abrasive Disc Holder 0.955.0022 SDM 45G x x
Special DiscCarborondum disc 0.955.0027 SDM 45G x
PadsPad micro fiber 5 pcs 6.508.0115 SDM 35G xPad micro fiber 2 pcs 6.508.0116 SDM 45G xPad beige 5 pcs 6.508.0032 SDM 45 G 40-160 xPad red 5 pcs 6.508.0117 SDM 35G x xPad red 5 pcs 6.508.0118 SDM 45G x xPad red 5 pcs 6.508.0119 SDM 53G x xPad green 5 pcs 6.508.0037 SDM 35G x xPad green 5 pcs 6.508.0039 SDM 45G x xPad green 5 pcs 6.508.0120 SDM 53G x xPad black 5 pcs 6.508.0044 SDM 35G xPad black 5 pcs 6.508.0046 SDM 45G xPad black 5 pcs 6.508.0123 SDM 53G xPad silver Inox 5 pcs 6.508.0121 SDM 45G xPad silver Inox 5 pcs 6.508.0122 SDM 53G x
0.955.0023 SDM 45G x0.955.0024 SDM 45G x
Vidia disc GR24 0.955.0026 SDM 45G xVidia disc GR36 0.955.0025 SDM 45G x
Accessories
X = suitable
99
Single disc machines
Strip
ping
synt
hetic
floo
r (PV
C).
Strip
ping
cor
k pr
esen
t floo
r (li
nole
um).
Wet-
scru
bbin
g/ba
sic cl
eani
ng o
f sto
nes,
tiles a
nd li
no (s
ensit
ive fl
oors)
Wet-
scru
bbin
g/ba
sic cl
eani
ng o
f sy
nthe
tic o
r non
-sens
itive
floo
rs (P
VC)
Crys
talliz
ing
Carp
et sh
ampo
oing
Sand
ing
woo
d
Sand
ing
cem
ent
Spra
y cle
anin
g
Spra
y po
lishi
ng a
nd b
uffin
g
10 l chemical tank 0.955.0001 SDM 35G 15-100 O O O O O
SDM 45G 15-130 O O O O O
SDM 45G 15-180 O O O O O
SDM 53G 15-180 O O O O O
Spray system 0.955.0002 SDM 35G 15-100 O O
SDM 45G 15-130 O O
SDM 45G 15-180 O
SDM 53G 15-180 O
SDM 45G 35-180 O O
Detergent LCN-800F 3.697.0023 4 X 5 litres
LCN-800 3.697.0024 4 X 5 litres
LCB-740F 3.697.0031 4 X 5 litres
LCB-900WR 3.697.0030 4 X 5 litres
LCN-600SVF 3.697.0033 4 X 5 litres
LCN-700 3.697.0035 4 X 5 litres
LCN-680AL 3.697.0025 4 X 5 litres
LCN-650 3.697.0026 4 X 5 litres
LCN-640WM 3.697.0027 4 X 5 litres
S = standard equipment O = optional available
Accessories
100
SCL floor scrubber-driers
Direct experience of professional people has resulted in Lavor PRO floor scrubbers range: easy to handle, powerful, efficient, carefully conceived and designed by using top-quality materials.
Why cilindric brush?High speed rotation for a polishing effect; great dirt degrease in floors with grout ; possibility to link together the sweeping function; the rotation direction assists forwarding in models without traction.
Why disc brush?
for persistent dirt: the special setting of the brush plate allows a balanced gripping effect, assisting easy use in the non traction models. Complete cleaning also next to walls is possible and the compact washing element lower at the sides is studied to scrub also under edges.
How a squeegee should be designed?The shape and the material used grant a perfect drying in every condition, also on floors with grout or when quick U turns are necessary.The floating body can stay in the machine operating space (compact / room saving) The manual adjusting system grants a perfect drying on each kind of floors.
How long do battery charges last?It is impossible to determine exactly how long a battery charge lasts and so how long a machine can work in autonomy.Battery autonomy changes depending on type of surface, dirt quantity, brush type and way in which traction system is used (speed and slope).Battery life is made up of number of charge cycles (also incomplete), if use conditions, charge and service are perfectly observed. Manufacturing technology diversifies numbers of cycles, service needed, use/charge conditions and performances.
101
SCL floor scrubber-driers
brushes:The scrubbing group meets different cleaning
path need with 1, 2 or 3 disc brushes.
:Scrubbing group offer 1 or 2 roller brush solutions together with the sweeping capability.
Bristles of different material allows perfect cleaning in any conditions, (carpet and parquet included).
release: This system allows the automatic connection of the disc brush and a quick release toolless.
release: The fittings and releasing of brushes is toolless. Ordinary cleaning maintenace are simple and quick for anybody.
The pressure of brushes on the floor is made by the heavy brush plate that follows irregularity on the floor and gives
always the top pressure without any adjustment still with shorter bristles.
:Our two discs scrubbing groups have a belt (and reduction gear with a quick release elastic joint) transmission that further to prevent vibrations,
they grant the same brush rotation speed (so the same cleaning effect on the two sides) in any dirt or floor condition.
Together with the reliable mechanical solution faucet, this system reduce chemical consumption and avoid solution waste. The flow is open
only when brush is working, there is no accidental leak with machine stopped. The system is protected by a filter with easy maintenance.
To avoid dampness problem in the collection tank, our scrubber dryers have: antifoam devices, filters, decantation rooms, and liquids level sensors
(stopping the machine when the higher limit is reached). All these precautions grant the best efficiency and components longer life.
The space (length X width) needed to make a U-turn is the min. width in which it is possible to work with the machine. The smaller this room is, the higher
the machine output, because less maneuvering is needed. The technical features of our floor scrubber driers (the front wheel shaft is close to the rear one in the walk behind models and the tight steering radius of ride-on ones) grant the minimum room for U-turns. On each ride-on models there is an automatic device that lowers speed when turning, raising the safety level also for inexperienced users.
Some models are equipped with integrated battery charger, other ones have the predisposition only. It is possible to charge batteries in different rooms,
without coming back to the same place.
Standard integrated battery is built with a maintenance free technology and it does not require restrictions about the place for battery
charging. The non stop research allow to use always up-to-date batteries that combined with appropriate battery charger grant machine top performances.
Useful to check work sessions and to plan stops for battery charging. Best output and investment protection.
It informs when the autonomy is finishing , allowing the end of the cleaning task (stopping brushes first and then the rest). It prevents damages to the
batteries, preventing the complete discharge with any kind of technologies.
no-stop and separate control of water quantity and chemical product concentration with automatic and delayed stop of the supply when the machine stops (Automatic Detergent Measuring System).
102
SCL floor scrubber-driers
E = ELECTRICB = BATTERYBT = BATTERY with TRACTIONCS = Scrubbing and Sweeping unit
Page
Pow
er s
uppl
y
Brus
hes
Scru
bbin
g w
idth
Sque
egee
wid
th
Max
wor
king
cap
acity
Det
erge
nt ta
nk c
apac
ity
Reco
very
tank
cap
acity
Pack
agin
g
Wei
ght
Wei
ght
pcs
x pa
llet
Code Model V n° mm mm m2/h - ft2/h l/gal l/gal L x l x Hcm / inc kg lbs n°
8.501.0501 Sprinter 104 230V/50HZ 1 290 320 1015-10925 2,8/0,74 5,6/1,48 116x40x36 / 46x16x14 19 42 10
8.501.0508 Crystal Clean 105 230V/50HZ 1 290 320 1015-10925 2,8/0,74 5,6/1,48 116x40x36 / 46x16x14 20 42 15
8.511.0001 106 230V/50HZ 1 350 420 1225-13185 15/3,97 16/4,23 72x47x62 / 29x18x24 41,4 91 6
8.518.0004 107 230V/50HZ 1 360 460 1260-13562 11/2,91 12/3,17 81x56x80 / 32x22x32 46 101 1
8.518.0003 Quick 36B 107 12V 1 360 460 1260-13562 11/2,91 12/3,17 81x56x80 / 32x22x32 65 143 1
8.524.3002 108 230V/50HZ 1 450 800 1575-16952 25/6,61 28/7,39 106x50x88/42x20x35 73 161 1
8.524.0002 Speed 45B 108 24V 1 450 800 1575-16952 25/6,61 28/7,39 106x50x88/42x20x35 58 128 1
8.524.1002 Speed 45B 108 24V 1 450 800 1575-16952 25/6,61 28/7,39 106x50x88/42x20x35 58 128 1
8.515.3300 109 230V/50HZ 1 450 800 1800-19375 44/11,63 50/13,21 121x58x121/48x23x48 94 207 1
8.515.3302 109 230V/50HZ 1 500 800 2000-21527 44/11,63 50/13,21 121x58x121/48x23x48 96 211 1
8.515.1305 Free 45B 109 24V 1 450 800 1800-19375 44/11,63 50/13,21 121x58x121/48x23x48 99 218 1
8.515.0305 Free 45B 109 24V 1 450 800 1800-19375 44/11,63 50/13,21 121x58x121/48x23x48 163 359 1
SCL= Scrubber Drier model
R= Restyling scrubbing width
Nomenclature
Sprinter Crystal Clean Multimatic Quick FreeSpeed Easy-RNext Midi-R
NEW NEW NEW
103
SCL floor scrubber-driers
Page
Pow
er s
uppl
y
Brus
hes
Scru
bbin
g w
idth
Sque
egee
wid
th
Max
wor
king
cap
acity
Det
erge
nt ta
nk c
apac
ity
Reco
very
tank
cap
acity
Pack
agin
g
Wei
ght
Wei
ght
pcs
x pa
llet
Code Model V n° mm mm m2/h - ft2/h l/gal l/gal L x l x Hcm / inc kg lbs n°
8.515.1309 Free 45BT 109 24V 1 450 800 1800-19375 44/11,63 50/13,21 121x58x121/48x23x48 100 220 1
8.515.0309 Free 45BT 109 24V 1 450 800 1800-19375 44/11,63 50/13,21 121x58x121/48x23x48 164 362 1
8.515.1310 Free 50B 109 24V 1 500 800 2000-21527 44/11,63 50/13,21 121x58x121/48x23x48 101 222 1
8.515.0310 Free 50B 109 24V 1 500 800 2000-21527 44/11,63 50/13,21 121x58x121/48x23x48 165 364 1
8.515.1311 Free 50BT 109 24V 1 500 800 2000-21527 44/11,63 50/13,21 121x58x121/48x23x48 102 224 1
8.515.0311 Free 50BT 109 24V 1 500 800 2000-21527 44/11,63 50/13,21 121x58x121/48x23x48 166 366 1
8.525.3002 110 230V/50HZ 1 500 800 2000-21527 55/14,52 65/17,17 111x61x103/44x24x41 120 264 1
8.525.2003 Next 50B 110 24V 1 500 800 2000-21527 55/14,52 65/17,17 111x61x103/44x24x41 104 229 1
8.525.1205 Next 50BT 110 24V 1 500 800 2000-21527 55/14,52 65/17,17 111x61x103/44x24x41 114 251 1
8.525.4005 Next 50BT 110 24V 1 500 800 2000-21527 55/14,52 65/17,17 111x61x103/44x24x41 114 251 1
8.525.4006 Next 55BT 110 24V 1 550 800 2200-24210 55/14,52 65/17,17 111x61x103/44x24x41 120 264 1
8.525.1206 Next 55BT 110 24V 1 550 800 2200-24210 55/14,52 65/17,17 111x61x103/44x24x41 120 264 1
8.525.4007 Next 66BT 110 24V 2 660 800 2640-28416 55/14,52 65/17,17 111x61x103/44x24x41 130 186 1
8.525.1208 Next 66BTA 110 24V 2 660 800 2640-28416 55/14,52 65/17,17 111x61x103/44x24x41 133 193 1
8.516.0403 111 24V 1 450 800 2025-21796 67/17,70 77/20,35 143x76x127 / 56x30x50 125 275 1
8.516.0406 111 24V 1 500 800 2250-24218 67/17,70 77/20,35 143x76x127 / 56x30x50 128 282 1
8.516.0407 111 24V 2 550 800 2475-26640 67/17,70 77/20,35 143x76x127 / 56x30x50 131 289 1
8.516.0415 111 24V 2 660 800 2970-31968 67/17,70 77/20,35 143x76x127 / 56x30x50 140 308 1
8.517.0102 Midi-R 66BT 112 24V 2 660 900 3762-40493 88/23,25 91/24,04 156x82x128 / 61x33x51 183 403 1
8.517.0105 Midi-R 75BT 112 24V 2 750 900 4275-46015 88/23,25 91/24,04 156x82x128 / 61x33x51 183 403 1
8.515.0329 Hyper F 50BT 113 24V 1 500 800 2000-21527 44/11,63 50/13,21 121x58x121/48x23x48 102 224 1
8.516.0429 114 24V 2 660 800 2970-31968 67/17,70 77/20,35 143x76x127 / 56x30x50 109 240 1
8.517.0107 Hyper M 75BT 115 24V 2 750 900 4275-46015 88/23,25 91/24,04 156x82x128 / 61x33x51 183 403 1
8.574.2001 Comfort XS 75 essential 116 24V 2 750 900 3750-40364 110/29,06 130/34,34 152x97x154 / 59x39x61 220 484 1
8.574.3001 Comfort XS 75 116 24V 2 750 900 3750-40364 110/29,06 130/34,34 152x97x154 / 59x39x61 300 660 1
8.574.1001 Comfort XS 75 UP 117 24V 2 750 900 3750-40364 110/29,06 130/34,34 152x97x154 / 59x39x61 223 491 1
8.574.1002 Comfort XS 85 UP 117 24V 2 820 1000 6100-65660 110/29,06 130/34,34 152x97x154 / 59x39x61 233 513 1
8.575.0002 Comfort S-R 66 118 24V 2 660 900 4620-49729 140/36,99 150/39,63 200x118x171 / 79x46x67 325 716 1
8.575.0001 Comfort S-R 82 118 24V 2 820 1000 5740-61784 140/36,99 150/39,63 200x118x171 / 79x46x67 345 760 18.575.0005 Comfort S-R 75 Cs 119 24V 2 750 1000 5250-56510 140/36,99 150/39,63 200x118x171 / 79x46x67 410 904 18.578.0003 Comfort M87 120 36V 2 870 1110 6090-65552 200/52,84 210/55,48 200x118x171 / 79x46x67 432 952 18.578.0004 Comfort M102 120 36V 2 1020 1250 7140-76854 200/52,84 210/55,48 200x118x171 / 79x46x67 462 1018 1
8.572.0001 Comfort L102 121 36V 2 1020 1250 7140-76854 280/73,97 315/83,22 230x135x181 / 91x53x71 585 1289 1
8.572.0002 Comfort L122 121 36V 3 1220 1450 8540-91923 280/73,97 315/83,22 230x135x181 / 91x53x71 635 1400 1
Comfort S-R Comfort S-R CS Comfort M Comfort LComfort XSHyper F - E - M
NEW
104
SCL floor scrubber-driers
Optional:
64 x 100 ml cod. 0.010.0014
5.509.0007 Stationary plate
4.012.0154Main electric cable 7 m
0.010.0012 4 x ml 100 concentrated detergent
required 200 mm forward and reverse washing
Sprinter
Detergent solution cap
Structure built with durable materials
Ergonomic handleCable holder
Traceless wheels
Detergent tank
Recovery tank
SPRINTER
code 8.501.0501
power supply 230V / 50 Hz
scrubbing / squeegee width 290 / 320 mm
max working capacity 1015 m2/h
detergent tank capacity 2,8 l / 0,74 gal
recovery tank capacity 5,6 l / 1,48 gal
traction mechanical
RPM / pressure on the brushes 1000 / 7 kg / 15,43 lbs
brush motor power 200W
dB (A) 68
depression / vacuum motor 1428 mmH2O/800W
dimensions / weight 37x35x113cm/13kg
1- Brush motor2- Vacuum motor 3- Detergent solution flow4- Dirty liquid flow
2
3 4
1
200
mm
Standard accessories:
6.505.0002 PP brush ø100
6.505.0001 Squeegee
290mm
320 mm
Watch the video on youtube: www.youtube.com/lavorpro
105
SCL floor scrubber-driers
Optional:
64 x 100 ml cod. 0.010.0014
5.509.0007 Stationary plate
4.012.0154Main electric cable 7,5 m
0.010.0012 4 x ml 100 concentrated detergent
required: 200 mm both forward and reverse washing
Crystal Clean
Detergent solution cap
Structure built with durable materials
Ergonomic handle
Non-marking wheels
Detergent solution tank
Recovery tank
CRYSTAL CLEAN
Code 8.501.0508
Power supply 230V / 50 Hz
Scrubbing/squeegee width 290 / 320 mm
Max working capacity 1015 m2/h
Detergent tank capacity 2,8 l / 0,74 gal
Recovery tank capacity 5,6 l / 1,48 gal
Traction mechanical
RPM/pressure on the brushes 1000 / 7 kg / 15,43 lbs
Motor brush power 200W
Db (A) 68
Depression/vacuum motor power 1428 mmH2O/800W
Dimensions/weight 37x35x113cm/13kg
1- Motor brush2- Vacuum motor 3- Detergent solution flow4- Dirty liquid flow
2
3 4
1
200
mm
Standard accessories:
6.505.0002 PP brush ø100
5.509.0394 Soft brush ø100
6.505.0001 Squeegee
290mm
290mm
320 mm
NEW
Watch the video on youtube: www.youtube.com/lavorpro
106
SCL floor scrubber-driers
5.509.0007 Pedana di stazionamento
4.012.0154Cavo elettrico di alimentazione 7 m
Optional:
emptying free brush
SCL Multimatic
Reclining handle with control switches
Detergent solution regulation
Brush pressure regulation
External tool connection
Removable recovery tank
Detergent solution tank
MULTIMATIC 35E
code 8.511.0001
power supply 230V / 50 Hz
scrubbing / squeegee width 350 / 420 mm
max working capacity 1225 m2/h
detergent tank capacity 15 l
recovery tank capacity 16 / 17 l
traction mechanical
RPM / pressure on the brushes 700 / 19 kg / 42 lbs
brush motor power 600W
detergent solution system mechanical/by-pass
depression / vacuum motor 1570 mmH2O/950W
dimensions / weight 129x43x125cm/36kg
Standard accessories:
4.508.0080 PP brush ø100
4.508.0082 Tynex brush ø100
5.511.0532 injection-extraction tool kit
4.508.0081 Soft brush ø100
5.509.0108 Squeegee
5.509.0017Carpet tool without hole
5.509.0038Carpet tool with hole
350mm
350mm
350mm
420 mm
420 mm
420 mm
4.512.0068 extension electric cable 15 m with schuko plug
107
SCL floor scrubber-driers
Optional:
Standard accessories:5.511.1346 PP brush
5.511.1411 Soft brush
5.511.1412 Moderate abrasive brush
5.511.1413 Abrasive brush
4.508.1040 Front squeegee strip
4.508.1041 Rear squeegee strip
0.108.0045Battery charger 12V - 6A
0.107.0050 Battery 12V - 55A C20
0.108.0025
ø360mm
ø360mm
ø360mm
ø360mm
537x50 mm
590x50 mm
Reclining handle with control switches
service of the components
selection (automatic start-stop with solenoide valve)
SCL Quick 36
Drayn hole system
Detergent solution
Adjustable detergent solution
Inspection windowSquee-gee lifting lever
Removable recovery tank
Brush
QUICK 36E QUICK 36B
code 8.518.0004 8.518.0003
power supply 230V / 50 Hz 12V
scrubbing / squeegee width 360 / 460 mm 360 / 460 mm
max working capacity 1260 m2/h 1260 m2/h
detergent tank capacity 11 l / 2,91 gal 11 l / 2,91 gal
recovery tank capacity 12-13 l / 3,2 gal 12-13 l / 3,2 gal
traction mechanical mechanical
RPM / pressure on the brushes 130 / 18 kg / 40 lbs 150 / 18 kg / 40 lbs
brush motor power 370W 250W
detergent solution system mech./solenoide valve mech./solenoide valve
depression / vacuum motor 850 mmH2O/400W 650 mmH2O/250W
dimensions / weight 120x43x97cm / 38kg 120x43x97cm / 38kg + 19kg battery
1,5 m
4.512.0068 extension electric cable 15 m with shuko plug
Pad
Pad holder
Watch the video on youtube: www.youtube.com/lavorpro
108
SCL floor scrubber-driers
Reclining handle with control lever
(45B code 5.511.1714)
on request (only 45B)
water tank
Solution watertank
Recovery tank withvisual inspection
Easy access to the recovery tank
Brush
SPEED 45E SPEED 45B
Code 8.524.3002 8.524.0002
Power supply 230V / 50 Hz 24V DC (2x12V 55Ah maintenance-free batteries - included)
Scrubbing / squeegee width 450 / 800 mm 450 / 800 mm
Max working capacity 1575 m²/h 1575 m²/h
Detergent tank capacity 25 l / 6,61 gal 25 l / 6,61 gal
Recovery tank capacity 25-28 l / 6,61 gal 25-28 l / 6,61 gal
Traction mechanical mechanical
RPM / pressure on the brushes 140 / 25 kg 150 / 25 kg
Brush motor power 550W 400W
Detergent solution system mech./solenoid valve mech./solenoid valve
Vacuum motor 400W 370W
Dimensions / weight 106x50x88cm / 65kg 106x50x88cm / 50kg
Speed 45
Optional:
Standard accessories:
5.511.1688 PP brush
4.508.0468 Front squeegee blade
4.508.0467 Rear squeegee blade
0.108.0042Battery charger 24V - 10A
0.107.0061 Gel battery 12V - 50Ah C5
0.108.0025
ø430 mm
830 mm
870 mm
1,5 m
5.511.1711 Soft brush
5.511.1712 Moderate abrasive brush
5.511.1713 Abrasive brush
ø430mm
ø430mm
ø430mm
cable 15 m with Shuko plug
Pad
5.511.1095Pad holder
Recovery tank drain hose withadjustable flow system
Indicator of the solution water tank fill level
NEW
109
SCL floor scrubber-driers
floor type with “V” squee-gee
service of the components regulation
SCL Compact Free
Vacuum filter and floater
Detergent solution tank
Recovery tank
Brush plate
Control panel: operator presence safety system
Low level battery indicator: brush/vacuum and traction
progressive cut off
FREE 45E FREE 50E FREE 45B FREE 50B FREE 45BT FREE 50BT
code 8.515.3300 8.515.3302 8.515.0305 8.515.0310 8.515.0309 8.515.0311
power supply 230V 230V 24V 24V 24V 24V
scrubbing / squeegee width 450 / 800 mm 500 / 800 mm 450 / 800 mm 500 / 800 mm 450 / 800 mm 500 / 800 mm
max working capacity 1800 m2/h 2000 m2/h 1800 m2/h 2000 m2/h 1800 m2/h 2000 m2/h
detergent tank capacity 44 l / 11,63 gal 44 l / 11,63 gal 44 l / 11,63 gal 44 l / 11,63 gal 44 l / 11,63 gal 44 l / 11,63 gal
recovery tank capacity 50-60 l / 13,21-16 gal 50-60 l/13,21-16 gal 50-60 l/13,21-16 gal 50-60 l/13,21-16 gal 50-60 l/13,21-16 gal 50-60 l/13,21-16 gal
traction mechanical mechanical mechanical mechanical automatic automatic
RPM / pressure on the brushes 150/26 kg /57,26 lbs 150/30 kg / 66,07 lbs 150/20 kg / 44,05 lbs 150/24 kg / 52,86 lbs 150/20 kg / 44,05 lbs 150/24 kg / 52,86 lbs
brush motor power 550W 550W 250W 250W 250W 250W
detergent solution system mechanical/manual mechanical/manual mechanical/manual mechanical/manual mechanical/manual mechanical/manual
depression / vacuum motor 1700mmH2O/1000W 1700mmH2O/1000W 1280mmH2O/480W 1280mmH2O/480W 1280mmH2O/480W 1280mmH2O/480W
dimensions / weight 116x46x98cm / 80kg 116x51x98cm / 82kg 116x46x98cm / 85kg 116x51x98cm / 87kg 116x46x98cm / 86kg 116x51x98cm / 88kg
0.108.0042 Battery charger 220/240V-24V-12A
Optional:
Standard accessories:
PP brush
Squeegee strip
0.108.00251,5 m
Pad
brushes
pad holder
Version without Gel battery on request:
8.515.1305 Free 45B8.515.1310 Free 50B8.515.1309 Free 45BT8.515.1311 Free 50BT
2 x 0.107.0054 Spiracell battery 12V - 75A
110
SCL floor scrubber-driers
code 5.511.1742 B/BT models 5.511.1751 BTA models
water tankFront/rear lighting system (OPTIONAL) code 5.511.1774 BT models 5.511.1724 B models
(only for model 66 BTA)
Next
Recovery tank with visual inspection
Clean watertank
Front led lighting(optional)
User friendly control panel
Automatic brush lifting(only model 66 BTA)
Automatic detergent measuring system
Big size traction wheels
NEXT 50 E * NEXT 50 BT NEXT 55 BT NEXT 66 BTA
Code 8.525.3002 8.525.1205 8.525.1206 8.525.1208
Power supply 230V / 50 Hz 24V (**) 24V (**) 24V (**)
Scrubbing/squeegee width 500 / 800 mm 500 / 800 mm 550 / 800 mm 660 / 800 mm ( with actuator)
Max speed/working capacity 4,5 km/h - 2000 m2/h 4,5 km/h - 2000 m2/h 4,5 km/h - 2200 m2/h 4,5 km/h - 2640 m2/h
Detergent tank capacity 55 l / 14,52 gal 55 l / 14,52 gal 55 l / 14,52 gal 55 l / 14,52 gal
Recovery tank capacity 55-65 l / 14,52-17,17 gal 55-65 l / 14,52-17,17 gal 55-65 l / 14,52-17,17 gal 55-65 l / 14,52-17,17 gal
Traction motor mechanical / - automatic / 200W automatic / 200W automatic / 200W
RPM - pressure on the brushes 150 - 26 kg 150 - 33 kg 150 - 33 kg 150 - 40 kg
Brush motor power 550W 600W 600W 750W
Detergent solution system mechanical mech./solenoid valve mech./solenoid valve mech./solenoid valve
Vacuum motor power 400W 370W 370W 370W
Dimensions/weight 128x57x106cm/120 kg 128x57x106cm/114 kg 128x71x106cm/120 kg 128x71x106cm/133 kg
Next 50/55
Next 66
* Not included solenoid valve and hour meter(**) Available also in 220V version with AC/DC inverter and mechanical traction
Options: Battery charger on board set code 5.511.1723Models without battery charger and without automatic detergent measuring system available:
8.525.4005 Next 50 BT
8.525.4006 Next 55 BT
8.525.4007 Next 66 BT
odels with mechanical traction without battery charger, without solenoid valve, without hour meter, without automatic detergent measuring system available:
8.525.2003 Next 50 B
NEW
111
SCL floor scrubber-driers
without tools.
squeegee.
the wheel.
Self levelling brush plate
Solution tank filling cap
Recovery tank
Detergent solution tank
Handlebar with control lever
EASY-R 45BT EASY-R 50BT EASY-R 55 BT EASY-R 66 BT
Code 8.516.0403 8.516.0406 8.516.0407 8.516.0415
Power supply 24V 24V 24V 24V
Scrubbing/squeegee width 450 / 800 mm 500 / 800 mm 550 / 800 mm 660 / 800 mm
Max speed/working capacity 4,5 km/h - 2025 m2/h 4,5 km/h - 2250 m2/h 4,5 km/h - 2475 m2/h 4,5 km/h - 2970 m2/h
Detergent solution tank capacity 67 l / 17,70 gal 67 l / 17,70 gal 67 l / 17,70 gal 67 l / 17,70 gal
Recovery tank capacity 77-95 l / 20,35-25 gal 77-95 l / 20,35-25 gal 77-95 l / 20,35-25 gal 77-95 l / 20,35-25 gal
Traction type/traction motor power automatic / 200W automatic / 200W automatic / 200W automatic / 200W
RPM - pressure on the brushes 150 - 31 kg / 68,28 lbs 150 - 35 kg / 72,68 lbs 150 - 45 kg / 68,28 lbs 150 - 24 kg/ 52,86 lbs
Brush motor power 600W 600W 600W 600W
Detergent solution system mech./solenoide valve mech./solenoide valve mech./solenoide valve mech./solenoide valve
Depression/vacuum motor power 1280mmH2O / 480W 1280mmH2O / 480W 1280mmH2O / 480W 1280mmH2O / 480W
Machine dimensions/weight 129x56x102cm/94kg 132x56x102cm/97kg 132x61x102cm/100kg 132x73x102cm/109kg
Optional:
Pads
Batteries
Brushes
Pad holders
6.505.0012 high grip wheels
Standard accessories:PP brushes
Squeegee blades
SCL 45/50
SCL 55/60
0.108.0001Battery charger
112
SCL floor scrubber-driers
.
detergent solution.
SCL Midi-R
Self levelling brush plate
Detergent solution tank capRecovery tank
Detergent solution tank
Direct brake on wheel
Squeegee
User friendly control panel
forward speed setting, scrubbing and vacuuming selectors, battery charge indicator, traction direction indicator, key main switch
without tools.
batteries
MIDI-R 66BT MIDI-R 75BT
code 8.517.0102 8.517.0105
power supply 24V 24V
scrubbing / squeegee width 660 / 900 mm 750 / 900 mm
max speed / working capacity 5,7 km/h - 3762 m2/h 5,7 km/h - 4275 m2/h
detergent tank capacity 88 l / 23,25 gal 88 l / 23,25 gal
recovery tank capacity 91-95 l / 24,04-25 gal 91-95 l / 24,04-25 gal
traction motor automatic / 300W automatic / 300W
RPM - pressure on the brushes 150 - 43,5kg/95,9lbs 150 - 48,5 kg/ 107,48 lbs
brush motor power 1000W 1000W
detergent solution system mech./solenoide valve mech./solenoide valve
depression / vacuum motor 1733mmH2O / 550W 1733mmH2O / 550W
dimensions / weight 133x73x117cm/153kg 133x80x117cm/153kg
Optional:
Pad
Batteries
Brushes
Pad holder
Standard accessories:
PP brushes
Squeegee strip
0.108.0002Battery charger
113
SCL floor scrubber-driers
floor type with “V” squee-gee
service of the components regulation
Hyper F
Vacuum filter and floater
User friendly control panel
Detergent solution tank
Softgrip polyurethane wheels
Polyurethanesqueegee
Self levelling brush plate
Recovery tank
Hyper F 50BT
code 8.515.0329
power supply 24V
scrubbing/squeegee width 500 / 800 mm
max working capacity 2000 m2/h
detergent tank capacity 44 l / 11,63 gal
recovery tank capacity stop/total 50-60 l/13,21-16 gal
traction automatic
RPM/pressure on the brushes 150/20 kg/44,10 lbs
brush motor power 250W
detergent solution system mechanical/manual
depression/vacuum motor 1280mmH2O/480W
dimensions/weight 116x51x98cm / 88kg
Optional:
Standard accessories:
PP brushe code 5.511.1097
Front PUR squeegee strip 4.508.1178
Rear PUR squeegee strip 4.508.1177
Battery charger 0.108.0042
Spiracell battery 12V - 75A
2 x 0.107.0054
Pad
brushes
pad holder
NEW
WithPolyurethanesqueegee and
wheels
114
SCL floor scrubber-driers
without tools.
proof.
solution filter
forward speed setting, scrubbing and vacuuming selectors, battery charge indicator, traction direction indicator, key main switch
Self levelling brush plate
Detergent solution tank capRecovery tank
Detergent solution tank
User friendly control panel
Hyper E 66BT
code 8.516.0326
power supply 24V
scrubbing/squeegee width 660 / 800 mm
max working capacity 4,5 km/h - 2970 m2/h
detergent tank capacity 67 l / 17,70 gal
recovery tank capacity stop/total 77-95 l / 20,35-25 gal
traction automatic / 200W
RPM/pressure on the brushes 150 - 43,5 kg/95,9 lbs
brush motor power 600W
detergent solution system mech./solenoide valve
depression/vacuum motor 1280 mmH2O / 480W
dimensions/weight 132x73x102cm/109kg
Optional:
Pad
Batteries
brushes
pad holder
Standard accessories:
Softgrip polyurethane wheels
Polyurethanesqueegee
NEW
WithPolyurethanesqueegee and
wheels
PP brushes code 5.511.1105
Front PUR squeegee strip 4.508.1178
Rear PUR squeegee strip 4.508.1177
Battery charger 0.108.0048
115
SCL floor scrubber-driers
without tools.
proof.
solution filter
Hyper M
Self levelling brush plate
Recovery tank
Detergent solution tank
Softgrip polyurethane wheels
Polyurethane squeegee
User friendlyontrol panel
forward speed setting, scrubbing and vacuuming selectors, battery charge indicator, traction direction indicator, key main switch
Hyper M 75BT
code 8.517.0107
power supply 24V
scrubbing/squeegee width 750 / 900 mm
max working capacity 5,7 km/h - 4275 m2/h
detergent tank capacity 88 l / 23,25 gal
recovery tank capacity stop/total 91-95 l / 24,04-25 gal
traction automatic / 300W
RPM/pressure on the brushes 150 - 43,5kg/95,9lb
brush motor power 1000W
detergent solution system mech./solenoide valve
depression/vacuum motor 1733mmH2O / 550W
dimensions/weight 133x80x117cm/153kg
Optional:
Pad
Batteries
brushes
pad holder
Standard accessories:
Detergent solution tank cap
NEW
WithPolyurethanesqueegee and
wheels
PP brushes code 5.511.1168
Front PUR squeegee strip 4.508.0901
Rear PUR squeegee strip 4.508.0900
Battery charger 0.108.0049
116
SCL floor scrubber-driers
compartment. cover and filter.
COMFORT XS 75 Essential COMFORT XS 75
Code 8.574.2001 8.574.3001
Power supply 24V 24V
Scrubbing/squeegee width 750 / 900 mm 750 / 900 mm
Max speed/working capacity 5 km/h - 3750m2/h 5 km/h - 3750m2/h
Detergent solution tank capacity 110 l 110 l
Recovery tank capacity 130 / 155 l 130 / 155 l
Traction type/traction motor power anteriore-front / 600W anteriore-front / 600W
RPM - pressure on the brushes 150 / 50 kg 150 / 50 kg
Brush motor power 1000W 1000W
Max gradient empty/full tank 13 / 10% 13 / 10%
Depression/vacuum motor power 1734 mmH2O / 480W 1734 mmH2O / 480W
Machine dimensions/weight 146x81x138cm/168kg 146x81x138cm/300kg
Optional:
Tubular batteriesand brush plate lifting/lowering system
0.108.0002Battery charger
Traction control pedal
Front traction wheel
Detachable control panel
Recovery tank
Solution water dosing lever
Seat with operator safety device
Detergent solution tank
Recovery tank inspection cover and filter
Standard accessories:PP brushes
Squeegee blades
Pads
Brushes
Only code 8.574.3001
Pad holders
117
SCL floor scrubber-driers
compartment.
battery charger.
cover and filter. brush plate lifting/lowering system
squeegee lifting while reverse going.
COMFORT XS 75 UP COMFORT XS 82 UP
Code 8.574.1001 8.574.1002
Power supply 24V 24V
Scrubbing/squeegee width 750 / 900 mm 860 / 1000 mm
Max speed/working capacity 5 km/h - 3750m2/h 5 km/h - 4100m2/h
Detergent solution tank capacity 110 l 110 l
Recovery tank capacity 130 / 155 l 130 / 155 l
Traction type/traction motor power Front motorwheel/600W Front motorwheel/600W
RPM - pressure on the brushes 150 / 50 kg 150 / 50 kg
Brush motor power 1000W 1000W
Max gradient empty/full tank 13 / 10% 13 / 10%
Depression/vacuum motor power 1734mmH2O / 480W 1734mmH2O / 480W
Machine dimensions/weight 146x81x138cm/168kg 146x81x138cm/175kg
Recovery tank
Detergent solution tank
Non-marking wheels
Standard accessories:PP brushes
Squeegee blades
Optional:
Seat with operator safety device
Recovery tank inspection cover and filter
Traction control pedal
Front traction wheel
Detachable control panel
Solution water dosing lever
Tubular batteries
Pads
Brushes
Pad holders
118
SCL floor scrubber-driers
SCL Comfort S-R
Front traction wheel
Detergent solutionregulator
Recovery tank
Traceless wheels
Detergent solution tank
squeegee lifting while reverse going.
provided with large opening protected by quick locking cap.
window for cleaning and easy ordinary maintenance.
Inspection window
Advancement pedal
User friendly control panel
COMFORT S-R 66 COMFORT S-R 82
code 8.575.0002 8.575.0001
power supply 24V 24V
scrubbing / squeegee width 660 / 900 mm 820 / 1000 mm
max speed / working capacity 7 km/h - 4620m2/h 7 km/h - 5740m2/h
detergent tank capacity 140 l / 36,99 gal 140 l / 36,99 gal
recovery tank capacity 150-180l/39,6-47,6gal 150-180l/39,6-47,6gal
traction motor front wheel / 900W front wheel / 900W
RPM - pressure on the brushes 150 - 60 kg/132lb 150 - 80 kg/176lb
brush motor power 1000W 1000W
max gradient empty / full tank 10 / 7% 10 / 7%
depression / vacuum motor 1734mmH2O / 550W 1734mmH2O / 550W
dimensions / weight 175x77x149cm/238kg 175x93x149cm/258kg
Optional:
Pad
Tube batteriesGel batteries
Brushes
Pad holder
Standard accessories:
PP brushes
Squeegee strip
0.108.0003Battery charger+ Smartcard
119
SCL floor scrubber-driers
SCL Comfort S-R 75 CS
Front traction wheel
Detergent solution regulatorRecovery tank
Stainless Steel scrubbing and sweeping unit
Detergent solution tank
extremely durable and easy maintenance.
components. window for cleaning and easy ordinary maintenance.
Inspection window
Advancement pedal
User friendly control panel
COMFORT S-R 75CS
code 8.575.0005
power supply 24V
scrubbing / squeegee width 750 / 1000 mm
max speed / working capacity 7 km/h - 5250m2/h
detergent tank capacity 140 l / 36,99 gal
recovery tank capacity 150-180l/39,6-47,6gal
traction motor front wheel / 900W
RPM - pressure on the brushes 730 - 50 kg/110lb
brush motor power 2x 750W
max gradient empty / full tank 10 / 7%
depression / vacuum motor 1734mmH2O / 550W
dimensions / weight 175x93x149cm/323kg
Optional:
Tube batteriesGel batteries
Standard accessories:
Squeegee strip
0.108.0003Batttery charger+ Smartcard
3.099.1464Flexible hose pipe fill & rinse tank 3 m
3.602.0056 Rear brush PP ø150 mm - sp 0,5 mm
3.602.0057 Front brush PP ø150 mm - sp 0,7 mm
680mm
680mm
120
SCL floor scrubber-driers
SCL Comfort M
User friendly control panel
Front traction wheel
Detergent solution regulator
Easy access to electrical components
Recovery tank
Detergent solution tank
Automatic device for squeegee lifting while reverse going
with large opening protected by quick locking cap.
high performance batteries reduce stop machine.
Inspection window
Advancement pedal
COMFORT M87 COMFORT M102
code 8.578.0003 8.578.0004
power supply 36V 36V
scrubbing / squeegee width 870 / 1110 mm 1020 / 1250 mm
max speed / working capacity 7 km/h - 6090m2/h 7 km/h - 7140m2/h
detergent tank capacity 200 l / 52,84 gal 200 l / 52,84 gal
recovery tank capacity 210-240l/55,5-63,4gal 210-240l/55,5-63,4gal
traction motor front wheel / 900W front wheel / 900W
RPM - pressure on the brushes 150 - 90 kg/198lb 150 - 120 kg/264lb
brush motor power 1500W 1500W
max gradient empty / full tank 10 / 8% 10 / 8%
depression / vacuum motor 1800mmH2O / 600W 1800mmH2O / 600W
dimensions / weight 190x96x145cm/345kg 190x112x145cm/375kg
Optional:
Pad
Tube batteriesGel batteries
Brushes
Pad holder
Standard accessories:
PP brushes
Squeegee strip
0.108.0003Battery charger+ Smartcard
121
SCL floor scrubber-driers
SCL Comfort L
Traceless wheels
Recovery tank
Detergent solution tank
with large opening protected by quick locking cap. regulator
squeegee lifting while reverse going.
components.
steering radius.
Anti foam system
COMFORT L102 COMFORT L122
code 8.572.0001 8.572.0002
power supply 36V 36V
scrubbing / squeegee width 1020 / 1250 mm 1220 / 1450 mm
max speed / working capacity 7 km/h - 7140m2/h 7 km/h - 8540m2/h
detergent tank capacity 280 l / 73,97 gal 280 l / 73,97 gal
recovery tank capacity 315-340l/83,2-89,8gal 315-340l/83,2-89,8gal
traction motor on 3 wheels/3x600W on 3 wheels/3x600W
RPM - pressure on the brushes 150 - 120 kg/264lb 150 - 170 kg/374lb
brush motor power 1500W 3x 1000W
max gradient empty / full tank 15 / 14% 15 / 14%
depression / vacuum motor 1800mmH2O / 600W 1800mmH2O / 600W
dimensions / weight 222x112x169cm/535kg 222x128x169cm/585kg
Optional:
Pad
Tube batteriesGel batteries
Brushes
Pad holder
Standard accessories:
PP brushes
Squeegee strip
0.108.0003Battery charger+ Smartcard
Shock proof bar
SCL L 102
SCL L 122
122
SCL floor scrubber-driers
S = standard equipment O = optional
* = double brush **= triple brush
Sprin
ter
Crys
tal C
lean
Nex
t 50B
T
Nex
t 55B
T
Nex
t 66B
T *
6.505.0002 roller brush PP Ø 100/290 mm sec. 0,4 S S
6.505.0009 roller brush soft type Ø 100/290 mm sec. 0,12 with carpet tool O
5.509.0394 roller brush soft type Ø 100/290 mm 0,12 S
3.602.0056 roller brush PP Ø 150/680 mm sec. 0,5 rear position S
3.602.0057 roller brush PP Ø 150/680 mm sec. 0,7 front position S
4.508.0080 roller brush PP Ø 100/350 mm sec. 0,3 S
4.508.0081 roller brush soft type Ø 100/350 mm O
4.508.0082 roller brush abrasive type Ø 100/350 mm O
5.511.1101 disc brush PP Ø 275 / 10.5" S
5.511.1105 disc brush PP Ø 330 / 13" S S S S
5.511.1168 disc brush PP Ø 356 / 14" S S
5.511.1346 disc brush PP Ø 360 / 14" S
5.511.1411 disc brush PP Ø 360 / 14" sec. 0,3 soft type O
5.511.1412 O
5.511.1413 O
5.511.1109 disc brush PP Ø 406 / 16" S S S
5.511.1093 disc brush PP Ø 431 / 17" S S S
5.511.1688 disc brush PP Ø 431 / 17" S
5.511.1097 disc brush PP Ø 483 / 19" S S S S
5.511.1113 disc brush PP Ø 533 / 21" S
5.511.1102 disc brush Ø 265 / 10.5" abrasive type O
5.511.1106 disc brush Ø 330 / 13" abrasive type O O O O
5.511.1246 disc brush Ø 356 / 14" abrasive type O O
5.511.1110 disc brush Ø 406 / 16" abrasive type O O O
5.511.1094 disc brush Ø 431 / 17" abrasive type O O O
5.511.1713 disc brush Ø 431 / 17" abrasive type O
5.511.1098 disc brush Ø 483 / 19" abrasive type O O O O
5.511.1114 disc brush Ø 533 / 21" abrasive type O
Sprin
ter
Crys
tal C
lean
Nex
t 50B
T
Nex
t 55B
T
Nex
t 66B
T *
5.511.1103 O5.511.1107 O O O O5.511.1129 O
5.511.1592 O O
5.511.1111 O O O
5.511.1095 O O O O
5.511.1099 O O O O
5.511.1115 O
6.508.0050 pad locker for pad holder O O O O O O O O O O O O O O O O O O O O
Brushes
Pad holder
123
SCL floor scrubber-driers
Sprin
ter
Crys
tal C
lean
Nex
t 50B
T
Nex
t 55B
T
Nex
t 66B
T *
6.508.0095 Beige - (10 pz) Ø 280 mm/11” O
6.508.0030 Beige - (5 pz) Ø 340 mm/13,5” O O O O
6.508.0143 Beige - (5 pz) Ø 381 mm/15” O O O
6.508.0031 Beige - (5 pz) Ø 406 mm/16” O O O
6.508.0032 Beige - (5 pz) Ø 431 mm/17” O O O O
6.508.0034 Beige - (5 pz) Ø 483 mm/19” O O O O
6.508.0035 Beige - (5 pz) Ø 533 mm/21” O
6.508.0096 green - (10 pz) Ø 280 mm/11” O
6.508.0037 green - (5 pz) Ø 340 mm/13,5” O O O O
6.508.0144 green - (5 pz) Ø 381 mm/15” O O O
6.508.0038 green - (5 pz) Ø 406 mm/16” O O O
6.508.0039 green - (5 pz) Ø 431 mm/17” O O O O
6.508.0041 green - (5 pz) Ø 483 mm/19” O O O O
6.508.0042 green - (5 pz) Ø 533 mm/21” O
6.508.0097 black - (10 pz) Ø 280 mm/11” O
6.508.0044 black - (5 pz) Ø 340 mm/13,5” O O O O
6.508.0141 black - (5 pz) Ø 381 mm/15” O O O
6.508.0045 black - (5 pz) Ø 406 mm/16” O O O
6.508.0046 black - (5 pz) Ø 431 mm/17” O O O O
6.508.0048 black - (5 pz) Ø 483 mm/19” O O O O
6.508.0049 black - (5 pz) Ø 533 mm/21” O
6.508.0126 red - (5 pz) Ø 381 mm/15” O
6.508.0133 brown - (5 pz) Ø 381 mm/15” O
Abrasive pad for pad holder
S = standard equipment O = optional
* = double brush **= triple brush
124
SCL floor scrubber-driers
Sprin
ter
Crys
tal C
lean
Nex
t 50B
T
Nex
t 55B
T
Nex
t 66B
TA *
6.505.0001 front and rear squeegee strip kit S S
4.508.0949 front or rear type S
4.508.1040 front mm 537x2,5 S
4.508.1041 rear mm 590x3 S
4.508.0468 front mm 830x3 S S S S S S S S S
4.508.0467 rear mm 870x4 S S S S S S S S S
4.508.1523 rear mm 900x4 S
4.508.1524 front mm 860x4 S
4.508.0646 front mm 925x4 S S S S S
4.508.0605 rear mm 950x5 S S S S S
4.508.1196 front mm 1027x3 S S
4.508.1195 rear mm 1150x4 S S
4.508.0215 front mm 1110x4 S
4.508.0214 rear mm1185x6 S
4.508.0217 front mm 1270x4 S
4.508.0216 rear mm 1345x6 S
4.508.0219 front mm 1500x4 S
4.508.0218 rear mm 1580x6 S
4.508.1058 front mm 537x2,5 PUR oil proof O
4.508.1059 rear mm 590x3 PUR oil proof O
4.508.1178 front mm 830x3 40sh PUR oil proof O O O O O O O O O
4.508.1177 rear mm 870x4 40sh PUR oil proof O O O O O O O O O
4.508.1525 rear mm 900x4 40sh PUR oil proof O
4.508.1526 front mm 860x4 40sh PUR oil proof O
4.508.0901 front mm 925x4 40sh PUR oil proof O O O O O
4.508.0900 rear mm 950x5 40sh PUR oil proof O O O O O
4.508.1251 front mm 1027x3 PUR oil proof O O
4.508.1252 rear mm 1150x4 PUR oil proof O O
4.508.1166 front mm 1110x4 PUR oil proof O
4.508.1165 rear mm 1185x6 PUR oil proof O
4.508.1167 front mm 1270x4 33sh PUR oil proof O
4.508.0897 rear mm 1345x6 33sh PUR oil proof O
4.508.1169 front mm 1500x4 PUR oil proof O
4.508.1168 rear mm 1580x6 PUR oil proof O
0.010.0014 concentrated floor detergent (64 pieces x 100ml) O O
5.509.0007 stationary plate with brushes protection system S S
5.509.0017 carpet tool without hole S
5.509.0038 carpet tool with hole S
5.511.0532 injection/extraction tool kit O
5.509.0310 flexible pipe front connection O
3.754.0007 floor tool Ø 37mm - cm 25 O
3.754.0008 floor tool Ø 37 - cm 10 O
3.753.0005 extension pipe 0,50 m Ø 37 O
6.505.0012 “high grip“ wheels kit mm160x45 O O O O
4.512.0068 O O O O O O O O
5.511.1742 batteries trolley O O
5.511.1751 batteries trolley O
3.099.1464 flexible hose pipe "fill & rinse" tank mm3000 O O O O O O O O O O O O O O O O O O O O O O O O
Accessories
Squeegee strip
125
SCL floor scrubber-driers
S = standard equipment O = optional (1) = n° battery
Qui
ck 3
6B
Spee
d 45
B
Nex
t 50B
T
Nex
t 55B
T
Nex
t 66B
TA (*
)
Com
fort
XS75
0.107.0050 Spiralcell battery 12V - 52Ah C5 - 55Ah C20 with quick connection S(1)
0.107.0061 Gel battery 12V MFPF50 - 50Ah C5 S(2) O(2) O(2)
0.107.0054 Spiralcell battery 12V - 75Ah YTS 5.5 O(2) S(2) S(2) O(2) O(2) O(2) O(2)
0.107.0063 Gel battery 12V MFP105 - 105Ah C5 O(2) O(2) O(2)
0.107.0002 Tube battery 12V - 118Ah C5 - 157Ah C20 O(2) O(2) O(2) O(2) O(2) O(2) O(2) O(2) O(2) O(2)
6.505.0019 Gel battery 12V-110Ah C5-M6F O(2) O(2) O(2) O(2)
0.107.0031 Battery poles kit M6 M (+ -) O(2) O(2) O(2) O(2)
0.107.0004 Tube battery 6V - 180Ah C5 - 240Ah C20 O(4) O(4) O(4) O(4)
0.107.0033 Gel battery 6V-180Ah C5 M8 O(4) O(4) O(4) O(4)
0.107.0047 Battery poles kit M8 M (+ -) O(4) O(4) O(4) O(4)
0.107.0034 Tube battery 6V - 240Ah C5 O(4) O(4) O(4)
0.107.0008 Tube battery in tray 24V - 525Ah C5 O(1) O(1)
0.107.0009 Tube battery in tray 36V - 360Ah C5 O(1)
0.107.0010 Tube battery in tray 36V - 525Ah C5 O(1)
0.107.0011 Gel battery in tray 24V - 400Ah C5 O(1) O(1)
0.107.0012 Gel battery in tray 36V - 320Ah C5 O(1)
0.107.0013 Gel battery in tray 36V - 400Ah C5 O(1)
0.107.0058 VRLA battery 6V - 200Ah C20 - 175 Ah C5 O(4) S(4) O(4)
0.108.0045 on board 12V - 6A S
0.108.0051 separate booster charger kit 12V - 30A O
0.108.0042 LWS 5 - 220/240V - 24V - 12A without plug S S S
0.108.0059 LWS - 24V - 12A S S S
0.108.0054 on board 24V - 20A S
5.511.1723 on board 24V - 12A Set O O O
5.511.1494 on board 24V - 12A O O O O
5.511.1641 Kit battery charger O S O
5.511.1495 on board 24V - 25A O O
0.108.0001 LWS 1 - 12/24V - 12A O O O O O O O O O
0.108.0002 LWS 2 - 12/24V - 25A O O O O O
0.108.0003 LWS 2 - 24/36V - 60A O O O O
0.108.0006 24V - 60 A tube battery smartcard O O
0.108.0007 24V - 50A gel battery smartcard O O
0.108.0008 36V - 50A tube battery smartcard O O
0.108.0009 36V - 50A gel battery smartcard O O O
0.108.0010 36V - 60A tube battery smartcard O
0.108.0025 S S S
0.108.0026 USA plug cable for integrated battery charger 1,5 m O O O
0.108.0027 UK plug cable for integrated battery charger 1,5 m O O O
0.108.0028 AUS plug cable for integrated battery charger 1,5 m O O O
0.108.0050 Battery charger / PC cable connection without software O O O O O O O O O O O O
0.108.0053 CD-ROM software Data Reader "Battery charger - PC" O O O O O O O O O O O O
Battery charger
SMARTCARD:
battery charger, they set automatically propre battery recharge curve (vital function for perfomances and battery life).
Battery charger:Battery chargers are supplied already preset if requested together with batteries. If the charger is ordered alone, it is necessary to specify the setting desired. Before first recharging procedure is always important to check the proper setting of the charger.
Batteries
126
Sweepers
Is it better a petrol engine driven or a battery powered model?
The use of a petrol engine implies the presence of exhaust gasses and therefore the machine must be used only in outside areas or in areas where the operator is not exposed at such risk. The battery models can be used also inside. From the technical and qualitative point of view the sweepers do exactly the same cleaning task, but the petrol engine machine can work nonstop (it is only necessary to fill up the tank with petrol), while the electric models, once the battery is empty, need to be re-charged (an average of 8-10 hours of charge, if battery is completely worn-out)
How should the brush be?
In the sweepers, there are two types of bushes: the first one rotates with a perpendicular axle to the floor (this is the one called “side brush”), it is useful to move dirt into the collecting area and to reach dirt near borders or under edges; the second one rotates with a parallel axle to the floor (this is the one called “main brush”); it rotates counterclockwise (opposite) to the forward direction of machine and collects dirt into the collection tank. The brushes differ in the shape (round flat the “side brush” and cylindrical the “main brush”), in the type of bristles (the way bristles are arranged on the brush body), in the body material (that accordingly to options, provides resistance still in humid enviroment or competitive construction) and in the bristle material /diameter/shape.Generally, the stiffer and rougher the bristles are, the better they collect the heaviest dirt adherent to the floor (typically wet leaves). The more flexible and thinner the bristles are, the better they collect light and thin dirt . To have a better scraping action, it is necessary to add steel bristle to the PPL ones. To collect very thin dirt, it is necessary to use only short round PPL bristles. As a consequence of motorization (petrol engine or electric one) and so of indoor or outdoor use, the walk behind models have stiffer or softer bristles, to adapt in best way possible to the type of dirt typically found in the working area.
How long do battery charges last?
It is impossible to determine exactly how long a battery charge lasts. Battery autonomy changes depending on type of surface, dirt quantity, brush type and way in which traction system is used (speed and slope).Battery life is made up of number of charge cycles (also incomplete), if use conditions, charge and service are perfectly observed. Manufacturing technology diversifies numbers of cycles, service needed, use/charge conditions and performances.
Which king ofbattery technology?
Batteries have different prices and so it is important to know their features in order to choose the best one as far as the operator’s needs or habits are concerned.They divide into two families according to the necessity of
recurrent acid solution refilling.Acid lead batteries (Pb-Acid), need
refilling, because during the charge cycle a lot of gasses are
generated (for this reason a specific and aired room
is necessary for safe working) and the
solution vaporizes: it is necessary to
add distilled water before the submerged lead parts that are
no more covered
with water begin to oxidize (compromised
efficiency). VRLA batteries (Valve
Regulated Lead Acid) are airtight, this means that gasses generated during the charge cycle are rearranged inside the
battery: refilling is not necessary, it is possible to charge them in any room and they can be carried without risk.Acid lead batteries divide themselves into categories depending on the thickness of plate they are built of: if the plate is plane, the resistance to discharge is lower and few charge cycles are necessary, if the plate is tubular (or armed, recognizable opening the battery cap and verifying that the plate is made up of a lot of cylinders side by side instead of a thin leaf sheet) there is a higher resistance to discharge and to charge cycles.
127
Sweepers
VRLA batteries divide themselves depending on the condition (liquid or gel) of the acid solution (that enables energy exchange) and on the way it is kept inside the battery: if it is liquid and kept by a spongy and filamentous material, the battery is called AGM; if it is a gel solution inside a membrane,
of products completely different in features and value and it is very important to know the manufacturing details to couple the right battery charger (it is not sure that any battery charger is suited and get a better result than the ones in our range that are specific for our batteries) and to come up to the working expectations.Whatever technology may be it is important to know that batteries have a common effect of self discharge (different for each type of manufacturing technology) and so it is important a recurrent charge (each three months approximately) if they are unused for long periods of time. Batteries suffer from incomplete charge cycle (except “pure lead” technology) and so it is necessary to charge them at the end of the working day (our battery charger is going to supply only the necessary energy and the charge cycle is going to finish earlier). It is also important not to cut off the charge before the battery charger has finished the cycle (green light). Respecting these simple rules, the best result and the best machine output will be obtained.
Waste is conveyed with a small push in the front part of the machine. It allows the collection of heavy waste but limiting dustraising.
Waste is conveyed, rotating on the main brush, into the back part of the machine; this allows an optimization of the collection capacity because the complete volume of the
tank is used. The machine is easy to handle because the weight is balanced on the wheel back axis.
The system allows a fast brush replacing, an easy/fast service and easy access to driving elements
.
The circular section grants a high resistance, stillness, reliability and it doesnt need service.
It is a system protecting bristles during machine stop or whenever it is not necessary to use it.
It can be found in the main brush area. Together with the mechanical action, it conveys waste and dust that are collected
into the tank through the right filters supplied.
As well as traditional vacuum system, a vacuum system can be found in the lateral brush/es collection area.
Dust dispersion outside the machine is limited also before the main collection area is reached.
Dust rubbing at high speed against sweeper metal parts creates a magnetic field that neutralizes on the user with small and annoying
discharges also through plastic material. This certified system removes this phenomenon on the machine, granting best comfort and safety for the user.
The main brush collection area is delimited by protections (flaps) touching the ground, better vacuum effect. Whith a big residual
is possible to raise the flap collecting it rather than keep going pushing it on the floor
It clears filter from dust without touching it or opening the sweeper; the vacuum efficiency is kept at max, granting the best comfort and
output for the user.
128
Sweepers
BSW 651 M SWL 700 STSWL 700 ET SWL 900 ET SWL 900 ST
Page
Type
Tracti
on
Main
brush
widt
h
Main
brush
+ 2
side
brus
hes
Colle
ctor t
ank
Max w
orking
capa
city
Pack
aging
Weigh
t with
pack
aging
Weigh
t with
pack
aging
Pcs x
palle
t
Main
brush
+ 1
side
bru
sh
Code Model mm / inc mm / inc mm / inc lt/gal m2 / foot2 L x l x H cm / inc
kg lbs n°
0.042.0101 BSW 651 M 130 manual Manual 500/19,68 700/27,56 - 40/10,58 1500/16146 79x76x46/31x29x18 25 55 5
0.061.0001 SWL 700 ET 131 electric Mechanical 510/20,08 680/26,77 - 45/11,89 2620/28201 126x63x85/50x25x34 78 172 1
0.061.0002 SWL 700 ST 131 gasoline motor Mechanical 510/20,08 680/26,77 - 45/11,89 2620/28201 126x63x85/50x25x34 77 169 1
0.061.0003 SWL 900 ET 132 electric Mechanical 710/27,95 880/34,64 - 60/15,85 3700/39826 126x83x85/50x33x34 89 196 1
0.061.0004 SWL 900 ST 132 gasoline motor Mechanical 710/27,95 880/34,64 - 60/15,85 3700/39826 126x83x85/50x33x34 97 213 1
NEW
NEWNEW NEW NEW
129
Sweepers
SWL R 850 ETSWL R 1000 STSWL R 1000 ET
SWL R 1000 ST Bin-UpSWL R 1000 ET Bin-Up
Page
Type
Tracti
on
Main
brush
widt
h
Main
brush
+ 2
side
brus
hes
Colle
ctor t
ank
Max w
orking
capa
city
Pack
aging
Weigh
t with
pack
aging
Weigh
t with
pack
aging
Pcs x
palle
t
Main
brush
+ 1
side
bru
sh
Code Model mm / inc mm / inc mm / inc lt/gal m2 / foot2 L x l x H cm / inc
kg lbs n°
0.061.0005 SWL R 850 ET 133 electric hydraulic 650/25,59 850/33,46 - 55/14,53 4900/52743 115x80x120/45x31x47 186 409 1
0.061.0006 SWL R 1000 ET 134 electric hydraulic 700/27,56 920/36,22 1230/48,42 62/16,38 6200/66735 143x91x114/56x36x45 260 572 1
0.061.0007 SWL R 1000 ST 134 gasoline motor hydraulic 700/27,56 920/36,22 1230/48,42 62/16,38 8280/89124 143x91x114/56x36x45 300 660 1
0.061.0008 SWL R 1000 ET BINUP 135 electric hydraulic 700/27,56 920/36,22 1230/48,42 62/16,38 6200/66735 163x91x114/66x36x45 310 682 1
0.061.0009 SWL R 1000 ST BINUP 135 gasoline motor hydraulic 700/27,56 920/36,22 1230/48,42 62/16,38 8280/89124 163x91x114/66x36x45 350 770 1
NEW
NEW NEW
130
Sweepers
medium surfaces.lock.
BSW 651 M
Tilting handle
Heavy duty steel frame
Traceless wheels
Shock proof frame
Die casting brush arm
BSW 651 M
code 0.042.0101
main brush width 500mm / 19,68inc
main brush + 1 side brush width 700mm / 27,56inc
collector tank/emptying system 40 lt -10,58 gal / manual
max working capacity 1500 m2/h - 16146 ft2
traction manual
brushes transmission elastic belt
pressure on the brushes regulable
side brush lifting arm system
dust-laying system direct
frame material steel
dimension / weight 79 x 76 x 46 cm/25 kg
Standard accessories:
0.942.0050
0.942.0037
500 mm
300 mm
NEW
131
Sweepers
regulation.
OPTIONALcode 0.961.0028
SWL 700 STTraction lever
Suction selection lever Honda motor type4 Hp gasoline 1,4 lt.
Reclining handle
Heavy duty steel frame
Side brush mechanical engagement
Wide collector tank
SWL 700 ET SWL 700 ST
code 0.061.0001 0.061.0002
main brush width 510mm / 20,08 inc 510mm / 20,08 inc
main brush + 1 side brush width 680mm / 26,77 inc 680mm / 26,77 inc
collector tank 45 lt / 11,89 gal 45 lt / 11,89 gal
max working capacity 2620m2/h-28201 ft2 2620m2/h-28201 ft2
traction mechanical mechanical
max speed 4 km/h-2,49mile/h 4 km/h-2,49 mile/h
motor type / power 12V / 400W Honda 4 HP / 2,9kW
filtering surface 2 m2 / 21,53 ft2 2 m2 / 21,53 ft2
pressure on the brushes regulable regulable
filter shaker electric manual
dimension / weight 126x63x85cm / 78kg 126x63x85cm /77kg
position 700 ST.
Standard accessories:
0.961.0008 PP
0.961.0005 PP
0.961.0001 paper filter 14 μm
Batteries
Battery charger
Optional:
0.961.0018
filter
0.961.0016
5μm
Flap raise system
NEW
(electric version)
132
Sweepers
SWL 900 ET SWL 900 ST
code 0.061.0003 0.061.0004
main brush width 710mm / 27,95 inc 710mm / 27,95 inc
main brush + 1 side brush width 880mm / 34,64 inc 880mm / 34,64 inc
collector tank 60 lt / 15,85 gal 60 lt / 15,85 gal
max working capacity 3700m2/h-39826 ft2 3700m2/h-39826 ft2
traction mechanical mechanical
max speed 4 km/h-2,49mile/h 4 km/h-2,49mile/h
motor type / power 12V / 400W Honda 4 HP / 2,9kW
filtering surface 3,02 m2 / 32,50 ft2 3,02 m2 / 32,50 ft2
pressure on the brushes regulable regulable
filter shaker electric manual
dimension / weight 126x83x85 cm / 89 kg 126x83x85 cm / 97 kg
OPTIONALcode 0.961.0028
regulation.
Heavy duty steel frame
Traction lever
Honda motor type 4 Hp gasoline tank 3,6 lt.
Reclining handle
SWL 900 ST
NEW
Suction selectionlever
Side brush mechanical engagement
Flap raise system
position900 ST.
(electric version)
Standard accessories:
0.961.0009 PP
0.961.0005 PP
0.961.0002 paper filter 14 μm
Batteries
Battery charger
Optional:
0.961.0019
filter
0.961.0017
5μm
133
Sweepers
SWL R 850 ET
code 0.061.0005
main brush width 650mm / 25,59 inc
main brush + 1 side brush 850mm / 33,46 inc
collector tank 55 lt / 14,53 gal
max working capacity 4900m2/h-52743 ft2
traction / limiting gradient front wheels / 14%
max speed 5,8km/h-3,60mile/h
motor type / power 12V / 1670 W (5 motors)
filtering surface 4 m2 / 43,06 ft2
pressure on the brushes regulable
filter shaker electric
dimension / weight 115x80x120cm/186 kg
Easy to use machine drives
Suction selection lever
of the components, thus resulting in totally safe quick changes of direction
Shock proof structure
Flashing light
Large filtering surface
Wide collector tank
Heavy duty steel frame
distributed on 5 cartridge filters fitted with electronic filter shaker.
central brush and side brush without tools
NEW
Flap raise system
Standard accessories:
0.961.0010 PP
0.961.0006 PP
0.961.0003 x 5 paper filter 14 μm
Batteries
Battery charger
Optional:
134
Sweepers
SWL R 1000 ET SWL R 1000 ST
code 0.061.0006 0.061.0007
main brush width 700mm / 27,56 inc 700mm / 27,56 inc
main brush + 1 side brush 920mm / 36,22 inc 920mm / 36,22 inc
main brush + 2 side brushes 1230mm / 48,42 inc 1230mm / 48,42 inc
collector tank 62 lt / 16,38 gal 62 lt / 16,38 gal
max working capacity 6200m2/h-66736 ft2 8280m2/h-89125 ft2
traction / limiting gradient rear wheels / 12% front wheel / 14%
max speed 5,8km/h-3,60mile/h 5,8km/h-3,60mile/h
motor type / power 24V / 1150W Honda 5,5 HP / 4,1kW
filtering surface 6 m2 / 64,6 ft2 6 m2 / 64,6 ft2
filter shaker electric electric
dimension / weight 143x91x114cm/260kg 143x91x114cm/300kg
Optional:
on request
code: 0.961.0024
code: 0.961.0025
Easy to use machine drives
ST versionHONDA 5,5 HP motor type gasoline tank 3,6 lt.
Front lighting system (OPTIONAL)
of the components, thus resulting in totally safe quick changes of direction
SWL R 1000 ST
Shock proof structure
Large filtering surface
Wide collector tank
Complete left side brush (OPTIONAL)
Heavy duty steel frame
distributed on 6 cartridge filters fitted with electronic filter shaker.
NEW
Standard accessories:
0.961.0011 PP
0.961.0007 PP
0.961.0004 x 6 paper filter 14 μm
135
Sweepers
SWL R 1000 ET BIN-UP SWL R 1000 ST BIN-UP
code 0.061.0008 0.061.0009
main brush width 700mm / 27,56 inc 700mm / 27,56 inc
main brush + 1 side brush 920mm / 36,22 inc 920mm / 36,22 inc
main brush + 2 side brushes 1230mm / 48,42 inc 1230mm / 48,42 inc
collector tank 62 lt / 16,38 gal 62 lt / 16,38 gal
refuse container lifting height 6200m2/h-66736 ft2 8280m2/h-89125 ft2
max working capacity rear wheels / 12% front wheel / 14%
traction / limiting gradient 5,8km/h-3,60mile/h 5,8km/h-3,60mile/h
max speed 24V / 1150W Honda 5,5 HP / 4,1kW
motor type / power 6 m2 / 64,6 ft2 6 m2 / 64,6 ft2
filtering surface / filter shaker electric electric
dimension / weight 163x91x114cm/310kg 163x91x114cm/350kg
SWL R 1000 ST
Comfortable control panel
Shock proof structure
Large filtering surface
Refuse container lifting h max 1,1 m
Heavy duty steel frame
distributed on 6 cartridge filters fitted with electronic filter shaker.
drives.Unload device for tank
emptying into dust containers up to 110 cm height
Optional:
on request
code: 0.961.0024
code: 0.961.0025
Complete left side brush (OPTIONAL)
NEW
Standard accessories:
0.961.0011 PP
0.961.0007 PP
0.961.0004 x 6 paper filter 14 μm
136
Sweepers
BSW
651
M
SWL
700
ST
SWL
900
ST
SWL
R 10
00 S
T
0.961.0001 paper panel filter 14 micron S S0.961.0002 paper panel filter 14 micron S S
0.961.0016 polyester panel filter 5 micron O O0.961.0018 Hepa panel filter O O0.961.0017 polyester panel filter 5 micron O O0.961.0019 Hepa panel filter O O0.961.0003 cartridge paper filter 14 micron S0.961.0004 cartridge paper filter 14 micron S S S S
0.961.0020 cartridge polyester filter 20 micron O0.961.0024 cartridge polyester filter 20 micron O O O O0.961.0025 Hepa cartridge filter O O O O
0.942.0037 PP side brush S0.961.0005 PP side brush S S S S0.961.0006 PP side brush S0.961.0007 PP side brush S S S S0.961.0023 mixed steel side brush O O O O
0.942.0050 PP main brush S
0.961.0008 PP - moplen body main brush - bristle d. 0,5 mm S S0.961.0009 PP - moplen body main brush - bristle d. 0,5 mm S S0.961.0010 PP - moplen body main brush - bristle d. 0,5 mm S0.961.0011 PP - moplen body main brush - bristle d. 0,5 mm S S S S0.961.0012 mixed steel - moplen body main brush O O0.961.0013 mixed steel - moplen body main brush O O0.961.0014 mixed steel - moplen body main brush O0.961.0015 mixed steel - moplen body main brush O O O O0.961.0021 left side arm brush (with brush) O0.961.0022 left side arm brush (with brush) O O O O
0.961.0026 trolley for collector tank set (SWL 700) O O0.961.0027 trolley for collector tank set (SWL 900) O O0.961.0029 steel collector tank O O O O0.961.0028 side brush protection O O O O0.961.0030 side brush protection O O O O
Accessories
S = standard equipment O = optional
137
Sweepers
Code Floor sweepers battery Code Battery charger
0.107.0002 Tube battery 12V - 118Ah C5 - 157Ah C20 O1 O1 0.108.0001 LWS 1 - 12/24V - 12A
0.107.0004 Tube battery 6V - 180Ah C5 - 240Ah C20 (add 1x5.511.0561) O2 O2 0.108.0002 LWS 2 - 12/24V - 25A
0.107.0033 Gel battery 6V-180Ah C5 M8 (add 1x5.511.0561) O2 O2 0.108.0002 LWS 2 - 12/24V - 25A
0.107.0002 Tube battery 12V - 118Ah C5 - 157Ah C20 O2 0.108.0001 LWS 1 - 12/24V - 12A
0.107.0004 Tube battery 6V - 180Ah C5 - 240Ah C20 O4 O4 0.108.0002 LWS 2 - 12/24V - 25A
0.107.0033 Gel battery 6V-180Ah C5 M8 O4 O4 0.108.0002 LWS 2 - 12/24V - 25A
0.107.0034 Tube battery 6V - 240Ah C5 O4 O4 0.108.0002 LWS 2 - 12/24V - 25A
Accessories
S = standard equipment O = optional (1)-(2)= n° batteries
138
Steam generators
GV is suitable to degrease and sanificate any object or surface in an easy, ecological and definitive way .
GV range is made up of electric generators producing saturated steam at 10 atm pressure and 180°C temperature.It is ideal for food and baking industry, for private and institutional use, for pharmaceutical and mechanical industry, for dairy factories, for building sectors and so on.
Performances: temperature, steam production and pressure
The same remarks about pressure and delivery rate made for high-pressure cleaners, have to be taken into consideration also for steam generators; in this case, the important difference is the physical relationship (and so not subjective or debatable) that exists between steam pressure and its temperature: to a fixed pressure values correspond right and univocal temperature. Knowing these values it is easy to identify the ones (like us) who show the right double relation between pressure and temperature.
Outlet steam temperature (not
boiler temperature, that is higher) is important because
there are natural limits (about 140°C) under which it is not possible to talk about
sanification and so the purpose that led to the machine purchase (clearly wrong) could be unattended.
Is it better a steam generator or a hot water high-pressure cleaner?
As far as the choice is concerned, the aspects to be considered are the analysis of the task that must be done and all the elements that make up the cost of the operation, i.e. working speed (labour cost) and (more and more important) waste treatment (waste disposal cost).As far as the working speed is considered, it is important the whole cleaning procedure and not only the effective washing time: with the high-pressure cleaner it is not possible an indoor washing, unless there is a filled in collection system, instead it is necessary to move the washing phase outside; with the steam generator it is not necessary to move outside,
139
Steam generators
it is possible to wash the part exactly where it is, because the water generated can be easily dried.Steam at 180°C allow to degrease dirt also without the use of heavy chemical products. If they are necessary to speed up the washing task, it is very important to consider the cost of draining away dirty water.The danger of chemical products used is generally proportional to the effectiveness against increasing dirt tenacity.If we wash with the high-pressure cleaner we produce from 10 to 21 litres of polluted water, that must be collected and drained following the current regulation: in a single wash of a couple of hours 2,5 tons of dirty water is produced!If we wash with a steam generator, the most powerful machine produces 37 litres per hour, with the most part of the liquid that evaporates, with a two hour wash the remaining dampness and disinfecting product is very low!Analyzing all these subjects it is clear that in particular circumstances (lack of purification plant for water treatment), the steam generator is more advantageous of a high-pressure cleaner. On the other side, rinsing speed is the consequence to the delivery rate that hits dirt, so if only the washing phase is considered, high-pressure cleaner is faster.Steam can be considered water with a related dampness very, very low (superheated steam is just hot air and it doesn’t have a significant mechanical action…), with an outlet temperature much higher (180°C) than a high-pressure cleaner: this means that the mechanical power is lower than the one of water, but the degreasing power of steam is much higher.
The temperature is set-up by an electronic regulator: it allows to obtain damp steam (low temperature) if our application needs a stronger
kinetic energy; or saturated steam if the application needs a little water waste on the surface.A lower temperature produces a set lower working pressure accordingly to the steam physic law.
Steam pressure gauge:
different phases inside the boiler: raising, achievement of maximum pressure and working
pressure during use..
Discharge valve: Allows a complete discharge of the boiler (not possible even through gun use). In this way it is possible to remove water and limestone residual
inside the boiler and from the coil surface. This valve maybe opened only when the boiler is not hot, and it is recommended to accomplish regularly.
The boiler is refilled by a water pump that gets water from an external water tank. This system allows an unlimited autonomy, because it is not
necessary to turn off the steam generator and wait a lower temperature to refill with water. An automatic control recharges the boiler when necessary. In some models there is an acoustic signal advising about low water level inside the water tank.
Detergent:Thanks to the presence of a secondary tank and pump, we can add chemical product to steam flow, favoring the breakup and the dust removing
speed. It is necessary to use specific chemical product to be mixed with steam and they must not be hazardous when vaporized (recommended: LCB-880DP)
Integrated vacuum: Dirt is vacuumed inside a tank integrated in the machine
Min. granted pressure:Performances of single phase or vacuuming steam generators, normally, decrease consistently while continuous duty.
Some models are equipped with integrated battery charger, other ones have the predisposition only. It is possible to charge batteries in different rooms,
without coming back to the same place.
Standard integrated battery is built with a maintenance free technology and it does not require restrictions about the place for battery
charging. The non stop research allow to use always up-to-date batteries that combined with appropriate battery charger grant machine top performances.
With our technology, steam is at 6 bar (158°C) even after 5 minutes of continuous work: performances much higher than any other machine of the same category. After closing the steam gun, steam pressure and temperature return to top values in few seconds
= steam production
140
Steam generators
GV Etna 3000 GV 3,3 M plus GV Vesuvio Kolumbo(Diesel steam generator)
Page
Absor
bed p
ower
Suctio
n moto
r
Max p
ressur
e
Steam
prod
uction
Max T
empe
rature
Heati
ng an
d activ
ation
time r
equir
ed
Water
tank
capa
city
Deter
gent
tank c
apaci
ty
Pack
aging
L x l x
H
Pack
aging
weig
ht
Pack
aging
weig
ht
Piece
s for
palle
t
Code Model W W bar Kg/h °C min l lmm
L x l x hkg lbs n°
8.451.0005 GV ETNA 3000 141 3000 1100 6 3,25 158 4-7 5 5 750x600x1030 41,4 91,27 28.450.0010 GV 3.3M PLUS 142 3300 - 9 4,62 175 7-10 5 5 595x435x650 37 81,57 28.452.0010 GV VESUVIO 10 143 10000 - 10 15 180 9-10 25 5 1300x780x1080 130 290,41 18.452.0002 GV VESUVIO 18 143 18000 - 10 22,5 180 7-10 25 5 1300x780x1080 134 295,41 18.452.0001 GV VESUVIO 30 143 30000 - 10 37,5 180 7-10 25 5 1300x780x1080 134 295,41 18.628.0002 KOLUMBO 144 350 - 10 37,5 178 2 25 25 1300x780x1080 134 295,41 18.628.0010 KOLUMBO CORDLESS 144 350 - 10 37,5 178 2 25 25 1300x780x1080 140 308,64 18.628.0011 KOLUMBO 2WAY 144 350 - 10 47 178 2 25 25 1300x780x1080 134 295,41 1
NEW
NEW
NEW
141
Vacuum steam generator
continuously. and detergents mixed with steam.
5.212.0021.
Drain hose
Powerful vacuum motor
Boiler 3 kW inox AISI 304 Thickness 25/10
Recovery tank capacity 64 l
Stainless steel bodyAISI 304
Ready steam warning light
Low water level warning light
Chemical or water selector
Chemical/water pump
Steam regulation
Blower available
Wheels suitable for food processing area
Tank for detergents and water
GV Etna 3000
Code 8.451.0005
Abs. power 3 Kw / 230V - 50Hz (Ph1)
Max pressure/temperature 6 bar / 158° C
Steam production 3.5 Kg/h
Boiler type/volume inox AISI 304 / 4 l. - Thickness 25/10
Water tank/deterg. tank capacity 5 l. / 5 l.
Vacuum motor 1100 W
Depression 20.39 kPa / 2000 mmH20
Air flow 220 m3/h
Cable lenght 6 m
Noise level 73 dB(A)
Dimensions / weight 630x540x880 / 32 Kg - 70.54 lbs
Standard accessories:
4mt
3000 W
NEW
Watch the video on youtube: www.youtube.com/lavorpro
142
GV 3,3M PLUS
code 8.450.0010
abs. power 3.3 Kw / 230V - 50Hz (Ph1)
max pressure 9 bar
steam production 4.62 Kg/h
max temperature 175° C
boiler type/volume inox AISI 304 / 3.6 l
water tank capacity 5 l
detergent tank capacity 5 l
heating and activation time req. 7-10 min
cable lenght 2.4 m
noise level <80 dB(A)
dimensions / weight 620x400x860 / 34 Kg - 74.95 lbs
Steam generators
Optional:
5.409.0101m 10 flexible hose with gun and detergent switch
5.409.0107m 15 flexible hose with gun and detergent switch
a temperature of 175°C.
tension control.
time required: 7 min.
and detergents mixed with steam.
GV 3,3 M plus
Chemical tank
S/S AISI 304
Steam regulation
Wheels suitable for use in food processing area
Water tank
Standard accessories:
143
GV Vesuvio10 bar180° C
GV Vesuvio 10 GV Vesuvio 18 GV Vesuvio 30
Code 8.452.0010 8.452.0002 8.452.0001
Absorbed power 10 Kw / 400V - 50Hz (Ph3) 18 Kw / 400V - 50Hz (Ph3) 30 Kw / 400V - 50Hz (Ph3)
Max pressure 10 bar 10 bar 10 bar
Steam production 15 Kg/h 22,5 Kg/h 37,5 Kg/h
Max temperature 180° C 180° C 180° C
Boiler type/volume inox AISI 304 / 18 l. inox AISI 304 / 18 l. inox AISI 304 / 18 l.
Water tank capacity 25 l. 25 l. 25 l.
Detergent tank capacity 5 l. 5 l. 5 l.
Heating and activation time required 9 min 7 min 6 min
Cable lenght 2.7 m 2.7 m 2.7 m
Noise level 72 dB(A) 72 dB(A) 72 dB(A)
Dimensions / weight 700x1130x800/100 Kg-222.22 lbs 700x1130x800/100 Kg-222.22 lbs 700x1130x800/100 Kg-222.22 lbs
refilled and detergents mixed with
steam.
Optional:
Control panel: ON-OFF main switch, indicator lamp,
thermoregulator, water and warning light (with buzzer),
boiler activating key, gun activating key
Chemical tank
Water tank
Non-marking wheels suitable for use in food processing area
Standard accessories:
Heating and activation timerequired: 6 min.
6.402.0087Steam gun with hose 6 m.
6.402.0085Steam gun with hose 10 m.
6.402.0067S/S glass wiper mm 350
6.402.0088Floor scraping lance
6.402.00646 holes triangular brush (without small brushes)
6.402.00657 holes triangular brush(without small brushes)
Replaces GV 18/30
Stainless steel body AISI 304
Steam generator
NEW
Watch the video on youtube: www.youtube.com/lavorpro
144
thermal efficiency steel coil.
burner.
refilled
for use with 2 gunswith detergent delivery controlled by the gun
KOLUMBO KOLUMBO CORDLESS KOLUMBO 2way
Code 8.628.0002 8.628.0010 8.628.0011
1Ph 110~120V, 220~240V / 50,60Hz 1x12V DC 75Ah C5 1Ph 110~120V, 220~240V / 50,60Hz
Connected Load 350 W 350 W 350 W
Fuel / water tank 25 / 25 lt 25 / 25 lt 25 / 25 lt
Burner Fuel Diesel Diesel Diesel
Fuel Consumption 3,0 lt/hr 3,0 lt/hr 3,78 lt/hr
Pre-heating time 5 min. 5 min. 5 min.
Steam Production 37,5 kg/h 37,5 kg/h 47 kg/h
Steam Pressure 10 bar 10 bar 10 bar
Steam Temperature 178°C 178°C 178°C
Machine dimensions 90(L)×65(B)×80(H) cm 90(L)×65(B)×80(H) cm 90(L)×65(B)×80(H) cm
Machine weight 122 kg - 268 lbs 140 kg - 308 lbs 122 kg - 268 lbs
Ergonomic handle
Heavy frame
Water tank
Accessory holder
Diesel tank
Integrateddetergent tank
Steam generators
NEW
With double gunsfor two operators
Only Kolumbo cordlessstandard on board
Standard accessories:
6 mt.
Watch the video on youtube: www.youtube.com/lavorpro
145
Steam generators
1 5.211.0068 Steam / suction handle complete with hose S2 3.754.0215 Glass wiper for small rectangular nozzle 230 mm S3 3.754.0196 Glass wiper for small rectangular nozzle 150 mm S4 3.754.0197 Brush for small rectangular nozzle S5 3.754.0194 Small rectangular nozzle steam/suction S6 3.754.0109 Bristle connection for accessory holder brush S7 3.754.0108 Glass wiper connection for accessory holder brush S8 3.754.0110 Carpet connection for accessory holder brush S9 3.754.0192 Accessory holder brush steam/suction S10 3.754.0204 Round suction brush S11 5.209.0126 Steam/suction nozzle for chairs S12 3.754.0005 Suction flat lance S13 3.754.0195 Accessory connection with steam/suction nozzle S14 6.402.0071 Small nylon bristles brush Ø 30 S15 6.402.0008 Small brass bristles brush Ø 30 S16 6.402.0073 Small stainless steel bristles brush Ø 30 S17 3.753.0085 S18 5.209.0151 Flexible suction hose S
Accessories
1
11
9
10
18
5
6
7
8
12
13
2
14
3
15
16
4
17G
V 3,
3 M
plu
s
1 3.754.0228 rectangular brush S2 3.754.0229 triangular brush S3 3.754.0230 turbo lance with nozzle S4 3.754.0231 nylon bristle brush Ø 28 S5 3.754.0232 brass bristle brush Ø 28 S6 3.754.0233 steel bristle brush Ø 28 S7 3.754.0234 nylon bristle brush Ø 50 S8 6.402.0096 triangular nylon bristle brush S9 3.099.0126 cloth for triangular brush S10 6.402.0095 steam scraper S11 3.754.0235 steam glass wiper S12 5.409.0256 3 mt flexible hose + gun and detergent switch S13 3.753.0111 steam extension hose S14 3.754.0250 brush-joint S
1
119
10
5 6
78
12
13
14
2
3
4
S = standard equipment O = optional
146
Steam generators
S = standard equipment O = optional
GV
Vesu
vio
30
1 6.402.0080 Steam gun with hose (3,5 m) O O O S S1 6.402.0087 Steam gun with hose (6 m) S S S* O O1 6.402.0085 Steam gun with hose (10 m) O O O O O1 6.402.0093 Steam gun with hose (15 m) O O O O O1 6.402.0090 Steam gun with hose (20 m) O O O O O2 6.402.0092 Straight lance mm 750 without nozzle O O O O O3 6.402.0081 Straight lance mm 175 without nozzle O O O S S4 6.402.0082 Curved lance mm 250 without nozzle S S S* S S5 6.402.0083 Straight lance mm 425 without nozzle O O O S S6 6.402.0046 Black plastic scraper l. 50 O O O S S7 6.402.0047 Stainless steel bristles brush Ø 30 S S S* S S8 6.402.0048 Brass bristles brush Ø 30 S S S* S S9 6.402.0045 Nylon bristles brush Ø 30 S S S* S S10 6.402.0069 Glass wiper O O O S S11 6.405.0197 Coupling for tanks Ø 40 O O O O O12 6.402.0094 O O O O O13 6.402.0097 Lance with flat nozzle O O O O O14 6.402.0098 Brass bristles brush Ø 80 O O O O O- 4.407.0077 Nozzle Ø 2,9 mm (2 pz.) S- 4.407.0079 Nozzle Ø 3,75 mm (2 pz.) S S S* S- 0.107.0054 Spiralcell battery 12V - 75Ah YTS 5.5 S
1
321213
4
5
6 9 7 8
10
11
Accessories
*= Two pieces
14
147
Chemicals & Sprayers
In order to complete the chemical products supply and to allow a better applicability and effectiveness, the sprayers are the perfect solution when supply wideness, use versatility and dosage saving are taken into consideration.
They are split into three different categories: pre-compression, pneumatic charge and continuous pneumatic charge.Pre-compression sprayers don’t need any separate air compressor, because the integrated manual pump is used to compress the tank and vaporize the product. They work at low pressures, they use plastic materials for easy moving, lightness and perfectly resistant to chemical products, thanks also to FPM seals (Viton).
Pneumatic charge sprayers need to be connected to an air compressor to charge the tank and allow the product vaporization without the connection to the air compressor. They work at high-pressures and so they use capacious steel or stainless steel tanks to allow a greater working autonomy.
Continuous pneumatic foam sprayers need a permanent connection to an air compressor; in this way air mixes with the chemical product producing a soft and voluminous foam that persists on surfaces: with a little chemical product, it is possible to treat wider areas or tough dirt (also on ceilings, inclined and/or slippery walls). They work at high-pressure and so they use capacious steel or stainless steel tanks to allow a greater working autonomy.
The chemical product spraying is a finishing phase of cleaning task with other machines. The choice of the right product considering the kind of cleaning task grants the best result, complying with the environment and the machine that sprays the chemical product. Our chemical products range has been conceived complying with the strictest rules protecting the environment and avoiding the indiscriminating use of products damaging the environment. The right measuring and respect of the instructions we suggest are the best balance of the economical and technical needs of each up-to-date and aware cleaning task.
Page
Prod
uct
Capa
city
Rech
argin
g
Work
ing pr
essu
re
Categ
ory
Single
pack
aging
we
ight
Single
pack
aging
we
ight
Single
pack
aging
dim
ensio
ns
Piece
s for
palle
t
Palle
t dim
ensio
ns
Code Model liters bar kg lbscm
L x l x HN°
cm L x l x H
0.006.0012 COMPREX NP10 148 Sprayer 10,75 Manual 3 Belt 2,3 kg 5 22x22x57 70 120x80x235
0.006.0011 COMPREX NP12 148 Sprayer 14,85 Manual 3 Trolley 4,9 kg 11 38x38x55 24 120x80x233
0.006.0002 SPRAY NV24 149 Sprayer 24 Pneumatic 6 Trolley 17 kg 38 34x34x82 18 102x102x215
0.006.0004 SPRAY NX24 149 Sprayer 24 Pneumatic 6 Trolley 13 kg 29 34x34x82 18 102x102x215
0.006.0003 SPRAY NV50 149 Sprayer 50 Pneumatic 6 Trolley 27 kg 60 47x47x107 12 141x107x205
0.006.0005 SPRAY NX50 149 Sprayer 50 Pneumatic 6 Trolley 20 kg 44 47x47x107 12 141x107x205
0.006.0007 FOAMJET SV24 150 Foam sprayer 24 Air operating 6 Trolley 17 kg 38 34x34x82 18 102x102x215
0.006.0009 FOAMJET SX24 150 Foam sprayer 24 Air operating 6 Trolley 13 kg 29 34x34x82 18 102x102x215
0.006.0008 FOAMJET SV50 150 Foam sprayer 50 Air operating 6 Trolley 27 kg 60 47x47x107 12 141x107x205
0.006.0010 FOAMJET SX50 150 Foam sprayer 50 Air operating 6 Trolley 20 kg 44 47x47x107 12 141x107x205
148
Chemicals & Sprayers
COMPREX NP10 COMPREX NP12
code 0.006.0012 0.006.0011
volume 10,75 l 14,85 l
max detergent capacity 8,50 l 12,00 l
residue < 0,25 l < 0,25 l
gasket type VITON chemicals use VITON chemicals use
detergent temperature range min 1°C - max 40° C min 1°C - max 40° C
recharging manual manual
working pressure - flow 3 bar - 1100cc / min. 3 bar - 1100cc / min.
safety system discharge valve discharge valve
hose type anti-freeze anti-freeze
hose / lance lenght 1150 mm / 650 mm 1800 mm / 1050 mm
dimension / weight 21x21x55 cm / 1,8 kg - 3,96 lbs 35x26x95 cm / 3,8 kg - 8,37 lbs
Standard accessories:
450 mm 600 mm
650 mm
Comprex
Comprex NP12
Comprex NP10
Discharge valve
Discharge valve
Tilting handle
Chemicals use gasket type
Manual recharging
Anti freeze hose type
149
SPRAY NV24 SPRAY NX24 SPRAY NV50 SPRAY NX50
code 0.006.0002 0.006.0004 0.006.0003 0.006.0005
capacity/model 24 l/painted 24 l/S/S 50 l/painted 50 l/S/S
working pressure 6 bar 6 bar 6 bar 6 bar
safety valve max 8 bar max 8 bar max 8 bar max 8 bar
pressure indicator pressure gauge pressure gauge pressure gauge pressure gauge
level indicator external column external column external column external column
recharging pneumatic pneumatic pneumatic pneumatic
pressure regulator manual manual manual manual
gun connection 1/4" G-F 1/4" G-F 1/4" G-F 1/4" G-F
hose type rilsan rilsan rilsan rilsan
hose / lance lenght 10 mt / 600 mm 10 mt / 600 mm 10 mt / 900 mm 10 mt / 900 mm
dimension / weight 28x32x75 cm / 15 kg - 33,06 lbs 28x32x75 cm / 11 kg - 24,25 lbs 45x42x100 cm / 25 kg - 55,11 lbs 45x42x102 cm / 18 kg - 39,68 lbs
Standard accessories:Spray
600 mm
Spray 24
10 m
900 mm
Spray 50
10 m
Detergent level indicator
Pressure gauge
Outlet quick coupling
S/S and painted version
code 0.906.0030
code 0.906.0031
code 0.906.0084
code 0.906.0084
Chemicals & Sprayers
150
FOAMJET SV24 FOAMJET SX24 FOAMJET SV50 FOAMJET SX50
code 0.006.0007 0.006.0009 0.006.0008 0.006.0010
capacity/model 24 l/painted 24 l/S/S 50 l/painted 50 l/S/S
working pressure 6 bar 6 bar 6 bar 6 bar
safety valve max 8 bar max 8 bar max 8 bar max 8 bar
pressure indicator pressure gauge pressure gauge pressure gauge pressure gauge
level indicator external column external column external column external column
recharging air operating air operating air operating air operating
pressure regulator manual manual manual manual
gun connection 1/4" G-F 1/4" G-F 1/4" G-F 1/4" G-F
hose type rilsan rilsan rilsan rilsan
hose / lance lenght 10 mt / 600 mm 10 mt / 600 mm 10 mt / 900 mm 10 mt / 900 mm
dimension / weight 28x32x75 cm / 15 kg - 33,06 lbs 28x32x75 cm / 11 kg - 24,25 lbs 45x42x100 cm / 25 kg - 55,11 lbs 45x42x102 cm / 18 kg - 39,68 lbs
Standard accessories:Foamjet
600 mm
Foamjet 24
10 m
900 mm
Foamjet 50
10 m
Detergent level indicator
Pressure gauge
Outlet quick coupling
S/S and painted version
Lance support
code 0.906.0035
code 0.906.0036
code 0.906.0084
code 0.906.0084
Chemicals & Sprayers
Goods travel at buyer’s risk.
Images and technical specifications of products and accessories
are not binding and can be modified without notice.
7.1
99.1
117-
12-2
011
LAVORWASH S.p.A. J.F.Kennedy, 12 - 46020 Pegognaga (MN) Italy - Tel. +39 0376 55431 - Fax +39 0376 558927