Indian Standrad

1

ETD

PROGRAMME OF WORK (AS ON 01 January 2012)

ELECTROTECHNICAL DEPARTMENT (ETD)

BUREAU OF INDIAN STANDARDS MANAK BHAVAN, 9 BAHADUR SHAH ZAFAR MARG

NEW DELHI – 110 002

2

ETD 1 BASIC ELECTROTECHNICAL STANDARDS SCOPE To prepare standards of general and common nature in the field of electrotechnology, such as voltages, current ratings and frequency, quantities and units, nomenclature, graphical symbols, basic marking and general requirements for enclosures of equipment.

Sl. No. IS Number/ DOC Number Title Reaffirm No. of Date Amd.

STANDARDS PUBLISHED

1 IS 1885(Part 1):1961 Electrotechnical vocabulary: Part 1 Fundamental Jul 2007 2 definitions

2 IS 1885(Part 9):1992 Electrotechnical Vocabulary: Part 9 Electrical Jul 2007 / IEC 60050(446):1983 relays (second revision) 3 IS 1885(Part 10):2008 Electrotechnical Vocabulary: Part 10 Power / IEC 60050(448):1995 system protection (second revision) 4 IS 1885(Part 11):1966 Electrotechnical vocabulary: Part 11 Electrical Jul 2007 measurements

5 IS 1885(Part 14):1967 Electrotechnical vocabulary:Part 14 Nuclear power Jul 2007 plants

6 IS 1885(Part 15):2008 Electrotechnical vocabulary: Part 15 Primary and / IEC 60050(482):2004 secondary cells and batteries (second revision) [Amalgamating IS 1885(Part 8):1986]

7 IS 1885(Part 16/Sec 1):1968 Electrotechnical vocabulary: Part 16 Lighting, Jul 2007 Section 1 General aspects

8 IS 1885(Part 16/Sec 2):1968 Electrotechnical vocabulary: Part 16 Lighting, Jul 2007 Section 2 General illumination, lighting fittings and lighting for traffic and signalling

9 IS 1885(Part 16/Sec 3):1967 Electrotechnical vocabulary: Part 16 Lighting, Jul 2007 Section 3 Lamps and auxiliary apparatus

10 IS 1885(Part 17):1979 Electrotechnical vocabulary: Part 17 Switchgear Jul 2007 and controlgear (first revision)

11 IS 1885(Part 27):2008 Electrotechnical Vocabulary: Part 27 Power / IEC 60050(551):1998 electronics (third revision) 12 IS 1885(Part 28):1993 Electrotechnical vocabulary: Part 28 Instrument Mar 2009 / IEC 60050(321):1986 transformers (first revision) 13 IS 1885(Part 29):1971 Electrotechnical vocabulary: Part 29 Mining terms Jul 2007

14 IS 1885(Part 30):1971 Electrotechnical vocabulary: Part 30 Overhead Jul 2007 transmission and distribution of electrical energy

15 IS 1885(Part 32):1993 Electrotechnical Vocabulary: Part 32 Electric Mar 2009 / IEC 60050(461):1984 cables (first revision) 16 IS 1885(Part 34):1972 Electrotechnical vocabulary: Part 34 Jul 2007

* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS

3

17 IS 1885(Part 35):1993 Electrotechnical vocabulary: Part 35 Rotating Mar 2009 / IEC 60050(411):1996 machinery (first revision) 18 IS 1885(Part 37):1993 Electrotechnical vocabulary: Part 37 Tariffs for Mar 2009 / IEC 60050(691):1973 electricity (first revision) 19 IS 1885(Part 38):1993 Electrotechnical vocabulary: Part 38 Power Mar 2009 / IEC 60050(421):1990 transformers and reactors (second revision)

20 IS 1885(Part 42):1993 Electrotechnical Vocabulary: Part 42 Power Mar 2009 / IEC 60050(436) :1990 capacitors (second revision) 21 IS 1885(Part 43):1977 Electrotechnical vocabulary: Part 43 Electrical Jul 2007 equipment used in medical practice

22 IS 1885(Part 49):1978 Electrotechnical vocabulary: Part 49 Industrial Jul 2007 process measurement and control

23 IS 1885(Part 51):1993 Electrotechnical vocabulary: Part 51 Industrial Jul 2007 / IEC 60050(841):1983 electro-heating 24 IS 1885(Part 53):1980 Electrotechnical vocabulary: Part 53 Mica Jul 2007 (superseding IS:1174)

25 IS 1885(Part 54):1993 Electrotechnical Vocabulary: Part 54 Insulators Mar 2009 / IEC 60050(471):1984 (first revision) 26 IS 1885(Part 55):1981 Electrotechnical vocabulary: Part 55 Electric fans Jul 2007

27 IS 1885(Part 57):2008 Electrotechnical vocabulary: Part 57 Circuit Theory / IEC 60050(131):2002 (second rrevision) 28 IS 1885(Part 60):1993 Electrotechnical Vocabulary: Part 60 Electrical Mar 2009 / IEC 60050(426):1990 apparatus for explosive atmospheres (first revision) 29 IS 1885(Part 61):1985 Electrotechnical vocabulary: Part 61 Nuclear Jul 2007 medical instruments

30 IS 1885(Part 62):1993 Electrotechnical vocabulary: Part 62 Solid Mar 2009 / IEC 60050(212):1990 insulating materials (first revision) 31 IS 1885(Part 69):1993 Electrotechnical Vocabulary: Part 69 Generation, Mar 2009 / IEC 60050(602):1983 transmission and distribution of electricity - 32 IS 1885(Part 70):1993 Electrotechnical Vocabulary: Part 70 Generation, Mar 2009 / IEC 60050(604):1987 transmission and distribution of electricity - 33 IS 1885(Part 71):1993 Electrotechnical Vocabulary: Part 71 Generation, Mar 2009 / IEC 60050(605):1983 transmission and distribution of electricity - 34 IS 1885(Part 72):2008 Electrotechnical Vocabulary : Part 72 Mathematics / IEC 60050 (101):1998 (first revision) 35 IS 1885(Part 73/Sec 1):1993 Electrotechnical vocabulary: Part 73 Physics and Mar 2009 / IEC60050(111-):1984 Chemistry, Section 1 Physical concepts 36 IS 1885(Part 73/Sec 2):1993 Electrotechnical Vocabulary: Part 73 Physics and Mar 2009 / IEC 60050(111-):1984 chemistry, Section 2 Electrotechnical concepts


4

37 IS 1885(Part 73/Sec 3):1993 Electrotechnical Vocabulary: Part 73 Physics and Mar 2009 / IEC 60050:(111-3):77 chemistry, Section 03 Concepts related to quantities and units

38 IS 1885(Part 74):1993 Electroechnical Vocabulary: Part 74 Electrical and Mar 2009 / IEC 60050(151): 1978 magnetic devices 39 IS 1885(Part 75):1993 Electrotechnical Vocabulary: Part 75 Automatic Mar 2009 / IEC 60050(351) 1975 40 IS 1885(Part 76):1993 Electrotechnical vocabulary: Part 76 Transducers Mar 2009 / IEC 60050(431):1980 41 IS 1885(Part 77):1993 Electrotechnical Vocabulary: Part 77 Overhead Mar 2009 / IEC 60050(466): 1990 42 IS 1885(Part 78):1993 Electrotechnical Vocabulary: Part 78 Genereation, Mar 2009 / IEC 60050(601):1985 transmission and distribution of electricity - 43 IS 1885(Part 79):1993 Electrotechnical Vocabulary: Part 79 Generation, Mar 2009 / IEC 60050(603):1986 transmission and distribution of electiricity - Power system planning and management

44 IS 1885(Part 80):1994 Electrotechnical vocabulary: Part 80 General terms Mar 2009 / IEC 60050(301):1983 on measurements in electricity 45 IS 1885(Part 81):1993 Electrotechnical vocabulary: Part 81 Electrical Mar 2009 / IEC 60050(302):1983 measuring instruments 46 IS 2032(Part 15):1976 Graphical symbols used in electrotechnology: Jul 2007 Part 15 Aircraft electrical symbols

47 IS 2032(Part 19):1977 Graphical symbols used in electrotechnology: Jul 2007 Part 19 Electrical equipment used in medical

48 IS 2032(Part 25):1980 Graphical symbols used in electrotechnology: Mar 2009 Part 25 Electrical installations in ships

49 IS 3599:1966 Methods of measurement of cooling medium Mar 2009 temperature for electrical apparatus

50 IS 3722(Part 1):1983 Letter symbols and signs used in electrical Jul 2007 | IEC 60027-1(1992) technology: Part 1 General guidance on symbols and subscripts

51 IS 3722(Part 2):1983 Letter symbols and signs used in electrical Jul 2007 | IEC 60273-1(92) technology: Part 2 Reference tables for symbols and subscripts

52 IS 5578:1984 Guide for marking of insulated conductors (first Mar 2011 1 | IEC 60391(1972) revision) 53 IS 7118:1973 Recommendations for direction of movement for Mar 2008

54 *IS 7691:1975 Frequencies for special power applications Mar 2009 | IEC 600113-1(71) 55 IS 8270(Part 1):1976 Guide for preparation of diagrams, charts and Mar 2009 | IEC 60113-1(71) tables for electrotechnology: Part 1 Definitions and classification

56 IS 8270(Part 2):1976 Guide for preparation of diagrams, charts and Mar 2009 | IEC 60113-2(71) tables for electrotechnology: Part 2 Item designation


5

57 IS 8270(Part 3):1977 Guide for preparation of diagrams, charts and Mar 2009 | IEC 60113-2(71) tables for electrotechnology: Part 3 General requirements for diagrams

58 IS 8270(Part 4):1977 Guide for preparation of diagrams, charts and Mar 2009 | IEC 60113-2(71) tables for electrotechnology: Part 4 Circuit diagrams 59 IS 8270(Part 5):1976 Guide for preparation of diagrams, charts and Mar 2009 | IEC 60113-2(71) tables for electrotechnology: Part 5 Interconnection diagrams and tables

60 IS 8270(Part 6):1983 Guide for preparation of diagrams, charts and Jul 2007 | IEC 60113-2(71) tables for electrotechnology: Part 6 Unit wiring diagrams and tables

61 IS 9409:1980 Classification of electrical and electronic Jul 2007 | IEC 61140 (2001) equipment with regard to protection against electric 62 IS 9499:1980 Conventions concerning electric and magnetic Mar 2009 | IEC 60375(72)2003 63 IS 9676:1980 Reference ambient temperature for electrical Mar 2009 equipment

64 IS 9677:1980 Guide for limits of temperature-rise of the windings Mar 2009 of electrical equipment when tested by different

65 IS 9678:1980 Methods of measuring temperature rise of Mar 2009 electrical equipment

66 IS 10381:1982 Terms (and their Hindi equivalents) commonly Mar 2009 used for name plates and similar data of electrical power equipment

67 IS 10580:1983 Service conditions for electrical equipment Jul 2007

68 IS 11353:1985 Guide for uniform system of marking and Jul 2007 | IEC 60445(1973) identification of conductors and apparatus 69 IS 11354:1985 Guide for identification by hour numbers of the Jul 2007 | IEC 60152(63) phase conductors of 3-phase electric systems 70 IS 11954:1987 Guide for colour coding of electrical mimic Mar 2009

71 IS 11955:1987 Preferred current ratings Mar 2009 | IEC 60059(1999) 72 IS 12032(Part 1):1987 Graphical symbols for diagrams in the field of Mar 2009 / IEC 60617-1(1985) electrotechnology: Part 1 General information, general index, cross reference table

73 IS 12032(Part 2):1987 Graphical symbols for diagrams in the field of Mar 2009 / IEC 60617-2(1983) electrotechnology: Part 2 Symbols elements, qualifying symbols and other symbols having general application

74 IS 12032(Part 3):1987 Graphical symbols for diagrams in the field of Mar 2009 / IEC 60617-3(1983) electrotechnology:Part 3 Conductors and connecting devices

75 IS 12032(Part 4):1987 Graphical symbols for diagrams in the field of Mar 2009 / IEC 60617-4(1984) electrotechnology: Part 4 Passive components


6

76 IS 12032(Part 6):1987 Graphical symbols for diagrams in the field of Mar 2009 / IEC 60617-6(1983) electrotechnology: Part 6 Production and conversion of electrical energy

77 IS 12032(Part 7):1987 Graphical symbols for diagrams in the field of Mar 2009 / IEC 60617-7(1983) electrotechnology: Part 7 Switchgear, controlgear and protective devices

78 IS 12032(Part 8):1987 Graphical symbols for diagrams in the field of Mar 2009 / IEC 60617-8(1983) electrotechnology: Part 8 Measuring instruments, lamps and signalling devices

79 IS 12032(Part 11):1987 Graphical symbols for diagrams in the field of Mar 2009 / IEC 60617-11(1983) electrotechnology: Part 11 Architectural and topographical installation plans and diagrams

80 IS 12360:1988 Voltage bands for electrical installations including Dec 2004 4 | IEC 60038(1983) preferred voltages and frequency (superseding 81 IS 60529:2001 Classification of Degrees of protection provided Jun 2009 / IS/IEC 60529:2001 by enclosures (IP Code) (Superceding IS FINALISED DRAFTS UNDER PRINT

1 DOC.ETD 1(6143) Electrotechnical Vocabulary : Part 111 Physics and / IS/IEC 60050-111 Chemistry [superseding IS 1885(Part 73/Sec 2 DOC.ETD 1(6144) Electrotechnical Vocabulary:Part 351 Control / IS/IEC 60050-351 Technology [superseding IS 1885(Part 75)] 3 DOC.ETD 1(6145) Electrotechnical Vocabulary Part 151 Electrical / IS/IEC 60050-151 and Magnetic Device [superseding IS 1885(Part 74)] 4 DOC.ETD 1(6151) Electrotechnical vocabulary: Part 841 Industrial / IS/IEC 600051-841 electroheat [superseding IS 1885(Part 51] DRAFT STANDARDS ISSUED IN WIDE CIRCULATION

1 DOC.ETD 1(6365) Electrotechnical Vocabulary - Part 300 : Electrical / IEC 60050-300 and electronic easurements and measuring instruments Part 311: General terms relating to measurements Part 312: General terms relating to electrical measurements Part 313: Types of electrical measuring instruments Part 314: Specific terms according to the type of instrument


7

ETD 2 SOLID ELECTRICAL INSULATING MATERIALS AND INSULATION SYSTEMS SCOPE To prepare standards: a) on solid electrical insulating materials. b) on guiding principles and on the philosophy of evaluation of insulation systems in general c) for functional test programmes and methods intended for evaluation of possible insulation systems and their suitability for use in electrical equipment. d) for classification of insulation systems based upon their capability to withstand the complex of the most important service determined by the conditions of the use of insulation in equipment.

Sl. No. IS Number/ DOC Number Title Reaffirm No. of Date Amd. STANDARDS PUBLISHED

1 IS 1175:1981 Methods for grading and classification of Oct 2006 | ISO 67 muscovite mica blocks, thins and films (first 2 *IS 1271:1985 Thermal evaluation and classification of electrical Oct 2006 | IEC 60085:1984 insulation (first revision) 3 IS 1576:1992 Solid pressboard for electrical purposes(first Apr 2008 1

4 IS 2259:1963 Methods of test for determination of insulation Oct 2010 1 | IEC 60167(1964) resistance of solid insulating materials 5 IS 2260:1973 Preconditioning, conditioning and testing of solid Apr 2008 electrical insulating materials (first revision)

6 IS 2448(Part 1):1963 Adhesive insulating tapes for electrical purposes: Oct 2010 5 Part 1 Tapes with cotton textile substrates

7 IS 2464:1963 Built-up mica for electrical purposes Apr 2008 1

8 IS 2584:1963 Method of test for electric strength of solid Oct 2006 1 insulating materials at power frequencies

9 IS 2824:2007 Method for the determination of the proof and the / IEC 60112:2003 comparative tracking indices of solid insulating materials (second revision)

10 IS 3352:1965 Varnished cotton cloth and tape for electrical Oct 2006 1

11 IS 3396:1979 Methods of test for volume and surface Oct 2006 resistivities of solid electrical insulating materials

12 IS 4248:1967 Non-ignitable and self-extinguishing boards (with Apr 2008 mineral base) for electrical purposes

13 IS 4249:1967 Classification and methods of tests for non- Apr 2008 1 ignitable and self-extinguishing properties of solid electrical insulating materials


8

14 IS 4486:1967 Recommended methods for the determination of Apr 2008 the permittivity and dielectric dissipation factor of electrical insulating materials at power, audio and radio frequencies including metre wavelengths

15 IS 4819:1968 Thin vulcanized fibre sheet (including leatheroid) for Oct 2006 electrical purposes - Specification

16 IS 4820:1968 Vulcanized fibre sheets for electrical purposes - Oct 2006 Specification

17 IS 5596:1970 Method of test for determining deleterious Oct 2010 substances in fibrous insulating materials

18 IS 5711:1970 Vulcanized fibre rods and tubes for electrical Apr 2008

19 IS 6230:1970 Woven asbestos tape for electrical insulating Apr 2008

20 IS 6659:1976 Electronic grade ceramic materials (first revision) Oct 2006

21 IS 7084:1973 Bitumen based filling compounds for electrical Mar 2008 1 purposes

22 IS 7571:1974 Methods of tests for ceramic for Oct 2010 telecommunication and allied purposes

23 IS 7755:1975 High tension insulating cotton tape Apr 2008 impregnated with bitumen based compound

24 *IS 7809(Part 1):1975 Pressure sensitive adhesive tapes for electrical Apr 2008 2 | IEC 60454-1(1974) purposes: Part 1 General requirements 25 IS 7809(Part 2):1977 Pressure sensitive adhesive tapes for electrical Oct 2006 1 | IEC 60454-2(1974) purposes: Part 2 Methods of test 26 IS 7809(Part 3/Sec 1):1986 Pressure sensitive adhesive tapes for electrical Oct 2006 1 | IEC 60454-2 purposes: Part 3 Requirements for individual materials, Section 1 Plasticized polyvinylchloride tapes with non-thermosetting adhesive (first

27 IS 7809(Part 3/Sec 2):1981 Pressure sensitive adhesive tapes for electrical Oct 2006 purposes: Part 3 Specifications for individual materials, Section 2 Requirements for polyester film tapes (PETP) with thermosetting adhesive

28 IS 7809(Part 3/Sec 3):1981 Pressure sensitive adhesive tapes for electrical Oct 2006 purposes: Part 3 Specifications for individual materials, Section 3 Polyester film tapes (PETP) with non-thermosetting adhesive

29 IS 7809(Part 3/Sec 4):1977 Pressure sensitive adhesive tapes for electrical Apr 2008 purposes: Part 3 Specifications for individual materials, Section 4 Cellulosic paper, creped with thermosetting adhesive

30 IS 7809(Part 3/Sec 5):1977 Pressure sensitive adhesive tapes for electrical Oct 2006 purposes: Part 3 Specifications for individual materials, Section 5 Cellulosic paper with thermosetting adhesive


9

31 * IS 8504(Part 1):1994 Guide for determination of thermal endurance Apr 2009 / IEC 60216-1 (1990) properties of electrical insulating materials : Part 1 General guidelines for ageing procedures & evaluation of test results (first revision)

32 *IS 8504(Part 2):1983 Guide for determination of thermal endurance Oct 2010 | IEC 60216-2(1974) properties of electrical insulating materials: Part 2 List of materials and available tests

33 IS 8504(Part 3):1994 Guide for determination of thermal endurance Apr 2009 | IEC 60216-3 properties of electrical insulating materials: Part 3 Statistical methods

34 *IS 8504(Part 4):1994 Guide for determination of thermal endurance Apr 2009 | IEC 60216-3 properties of electrical insulating materials: Part 4 Instructions for calculating the thermal endurance profile

35 IS 8516:2011 Electrical Insulating materials – Determination of / IEC 60426(2007) electrolytic corrosion caused by insulating materials – Test methods (first revision)

36 IS 8570:1977 Press paper for electrical purposes Oct 2006

37 IS 9043:1979 Method for grading (by size) of phlogopite mica Oct 2006 | ISO 444(1965) blocks, thins and splittings 38 IS 9044:1979 Method of measuring thickness of mica blocks, Oct 2006 | ISO 5972(1978) thins, films and splittings 39 IS 9045:1979 Thermal classification of phlogopite mica splittings Oct 2006 | ISO 5023(1977) 40 *IS 9299(Part 1):1979 Insulating materials based on built-up mica or Oct 2006 | IEC 60371-1(1972) treated mica paper: Part 1 Definitions and general requirements

41 *IS 9299(Part 2):1992 Insulating materials based on built-up mica or Apr 2008 | IEC 60371-2(1987) treated mica paper: Part 2 Methods of test (first 42 *IS 9299(Part 3/Sec 1):1979 Insulating materials based on built-up mica or Apr 2008 | IEC 60371-3-1(1973) treated mica paper: Part 3 Specifications for Individual materials, Section 1 Rigid mica material for commutator separators

43 *IS 9299(Part 3/Sec 2):1982 Insulating materials based on built-up mica or Oct 2006 treated mica paper: Part 3 Specifications for individual materials, Section 2 Moulding mica materials for electrical purposes

44 *IS 9299(Part 3/Sec 3):1982 Insulating materials based on built-up mica or Apr 2008 1 treated mica paper: Part 3 Specifications for individual materials, Section 3 Flexible mica flake tape for insulation of electrical machines

45 *IS 9299(Part 3/Sec 4):1982 Insulating materials based on built-up mica or Apr 2008 treated mica paper: Part 3 Specifications for individual materials, Section 4 Rigid mica materials for heating


10

46 *IS 9299(Part 3/Sec 5):1992 Insulating materials based on built up mica or Apr 2008 treated mica paper: Part 3 Specification for Individual materials, Section 5, Flexible mica materials in sheet form

47 *IS 9299(Part 3/Sec 6):1993 Insulating materials based on built-up mica or Apr 2008 1 treated mica paper: Part 3 Specifications for individual materials, Section 6 Glass backed mica paper with

48 *IS 9299(Part 3/Sec 7):1992 Insulating materials based on built-up mica or Apr 2008 treated mica paper: Part 3 Specification for individual material,

49 IS 9335(Part 1):1979 Cellulosic papers for electrical purposes: Part 1 Oct 2006 1 | IEC 60554-1(1977) Definitions and general requirements 50 IS 9335(Part 2):1998 Cellulosic papers for electrical purposes: Part 2 Oct 2006 / IEC 60554-2(2001) Methods of test (superseding IS:2188) 51 IS 9335(Part 3/Sec 1):1984 Cellulosic papers for electrical purposes: Part 3 Oct 2006 1 | IEC 60554-3-1 Specifications for individual materials, Section 1 General purposes electrical paper

52 IS 9335(Part 3/Sec 2):1985 Cellulosic papers for electrical purposes: Part 3 Oct 2006 | IEC 60554-3-2 Specifications for individual materials, Section 2 Capacitor paper

53 IS 9335(Part 3/Sec 3):1984 Cellulosic papers for electrical purposes: Part 3 Oct 2006 | IEC 60554-3-3(1980) Specifications for individual materials, Section 3 Crepe paper

54 IS 9335(Part 3/Sec 4):1984 Cellulosic papers for electrical purposes: Part 3 Oct 2006 | IEC 60554-3-4(1979) Specifications for individual materials, Section 4 Electrolytic capacitor paper

55 IS 9335(Part 3/Sec 5):1985 Cellulosic papers for electrical purposes: Part 3 Oct 2006 1 | IEC 60554-3-5 Specifications for individual materials, Section 5 Special papers

56 IS 9455:1980 Classification of muscovite mica blocks, thins and Oct 2006 1 films based on electrical properties

57 IS 9502:1980 Muscovite mica components for electronic Oct 2006 | ISO 5816-1(1979) 58 IS 9947:2011 Electrical Insulating materials used under severe / IEC 60587(2007) ambient conditions – Test methods for evaluating resistance to tracking and erosion (first revision)

59 *IS 10026(Part 1):1998 Insulating varnishes containing solvents: Part 1 May 2008 | IEC 60464-1(1976) Definitions and general requirements (first revision) 60 *IS 10026(Part 2):1999 Insulating varnishes containing solvents: Part 2 Aug 2009 | IEC 60464-2(19860 Methods of tests(first revision) 61 *IS 10026(Part 3/Sec 1):1999 Insulating varnishes containing solvents: Part 3 Feb 2009 | IEC 60464-3-1(1986) Specifications for individual materials, Section1Requirements for cold curing varnishes (first revision)

62 *IS 10026(Part 3/Sec 2):1999 Insulating varnishes containing solvents: Part 3 Jan 2009 | IEC 60464-3-2(1989) Specifications for individual materials, Section 2 Requirements for hot curing varnishes (first revision) * INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS

11

63 IS 10026(Part 3/Sec 3):1983 Insulating varnishes containing solvents: Part 3 Oct 2006 1 Specifications for individual materials, Section 3 Air drying varnishes with temperature index 130

64 IS 10026(Part 3/Sec 4):1983 Insulating varnishes containing solvents: Part 3 Oct 2006 1 Specifications for individual materials, Section 4 Baking varnishes with temperature index 120




68 IS 10026(Part 3/Sec 8):1986 Insulating varnishes containing solvents: Apr 2008 Part 3 Specifications for individual materials, Section 8 Baking varnishes with temperature index

69 IS 10026(Part 3/Sec 9):1986 Insulating varnishes containing solvents: Part 3 Apr 2008 Specifications for individual materials, Section 9 Baking varnishes with temperature index 130 for magnetic core sheets

70 IS 10163(Part 1):1982 Recommended methods of tests for the Apr 2008 | IEC 60377-1(1973) determination of dielectric properties of insulating materials at frequencies above 300 MHz: Part 1

71 IS 10192:1982 Synthetic resin bonded glass fibre (SRBGF) sheets Oct 2010 1 for electrical purposes

72 IS 10333:1982 Epoxy resin systems for cast resin insulated Apr 2008 power and control cable joints and terminations upto and including 11 kV

73 IS 10581:1983 Methods of test for determination of ionic Oct 2010 | IEC 60589(1977) impurities in electrical insulating materials by 74 IS 11182(Part 1):1984 Guide for evaluation of insulation systems of Oct 2006 | IEC 60505(1975) electrical equipment: Part 1 Identification, evaluation and ageing mechanisms

75 IS 11182(Part 2):1984 Guide for evaluation of insulation systems of Oct 2006 | IEC 60611(1978) electrical equipment: Part 2 Thermal endurance test 76 IS 11182(Part 3/Sec 1):1986 Guide for evaluation of insulation systems of Oct 2006 | IEC 60727-1(1982) electrical equipment: Part 3 Electrical endurance test procedures, Section 1 General considerations and evaluation procedures based on normal

77 IS 11182(Part 3/Sec 2):1996 Guide for evaluation of insulation systems of Oct 2006 | IEC 60727-2(1993) electrical equipments: Part 3 Electrical endurance test procedures Section 2 evaluation procedure based on extreme value distribution

78 IS 11182(Part 5):1993 Guide for evaluation of insulation system of Dec 2008 / IEC 60941(1988) electrical equipment: Part 5 Mechanical endurance functional tests * INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS

12

79 IS 11182(Part 6):1986 Guide for evaluation of insulation systems of Oct 2006 electrical equipment: Part 6 Performance evaluation based on service experience and

80 IS 11182(Part 7/Sec 1):1986 Guide for evaluation of insulation systems of Oct 2006 electrical equipment: Part 7 Multifactor functional testing, Section 1 Test procedures

81 IS 11221:1984 Recommended test methods for determining the Oct 2006 | IEC 60343(1970) relative resistance of insulating materials to breakdown by surface discharges

82 IS 11256(Part 1):1985 Method of test for determination of thermal Oct 2006 | IEC 60370(1971) endurance of insulating varnishes: Part 1 Electric 83 IS 11256(Part 2):1985 Method of test for determination of thermal Oct 2006 endurance of insulating varnishes: Part 2 Measurement of loss of mass

84 IS 11256(Part 3):1985 Methods of test for determination of thermal Oct 2006 | IEC 60290(1969) endurance of insulating varnishes: Part 3 Bond strength by helical coil method

85 IS 11297(Part 1):1985 Varnished fabrics for electrical purposes: Part 1 Oct 2006 1 Definitions and general requirements

86 IS 11297(Part 2):1988 Varnished fabrics for electrical purposes: Part 2 Oct 2010 Methods of tests

87 IS 11297(Part 3/Sec 1):1988 Varnished fabrics for electrical purposes: Part 3 Oct 2010 Specifications for individual materials, Section 1 Glass fabric backed varnished fabrics

88 IS 11298(Part 1):1985 Plastic films for electrical purposes: Part 1 Oct 2006 | IEC 60674-1(1980) Definitions and general requirements 89 IS 11298(Part 2):1999 Plastic films for electrical purposes: Part 2 Jan 2009 / IEC 60674-2(1988) Methods of test (first revision) 90 IS 11298(Part 3/Sec 1):1991 Plastic films for electrical purposes: Part 3 Oct 2010 Specifications for individual materials, Section 1 Polypropylene film for capacitors (first revision)

91 IS 11298(Part 3/Sec 2):1999 Plastic films for electrical purposes: Part 3 Jan 2009 Specifications for individual materials, Section 2 Metallized polypropylene films

92 IS 11298(Part 3/Sec 3):1998 Plastic films for electrical purposes:Part 3 Jul 2008 / IEC 60674-3-2 (1992) Specifications for individual materials,Section 3 Requirements for balanced biaxially oriented Polyethylene Terephalate(PET) films used for electrical insulation

93 IS 11298(Part 3/Sec 4):1998 Plastic films for electrical purposes: Part 3 Jul 2008 / IEC 60674-3-3(1992) Specification for individual materials, Section 4 Requirements for polycabonate (PC) films used or electrical insulation

94 IS 11298(Part 3/Sec 8):1998 Plastic films or electrical purposes: Part 3 Jul 2008 / IEC 60674-3-7(1992) Specification for individual materials, Section 8 Requirements for fluoroethylene (FEP) films used

95 IS 11298(Part 3/Sec 5-7):1998 Plastic Films for Electrical Purposes Part 3 Jul 2008 / IEC60674-3-4to6(1993 Specification for Individual Materials Section 5-7 Requirements for Polyimide Films * INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS

13

96 IS 11654(Part 1):1986 Flexible insulating sleeving: Oct 2006 | IEC 60684-1(1980) Part 1 Definitions and general requirements 97 IS 11654(Part 2):1986 Flexible insulating sleeving: Part 2 Methods of Oct 2006

98 IS 11654(Part 3/Sec 1):1988 Flexible insulating sleeving: Oct 2010 Part 3 Specifications for individual types of sleevings, Section 1 General purpose grade sleeving with temperature index 90

99 IS 11654(Part 3/Sec Flexible insulating sleevings: Oct 2010 Part 3 Specifications for individual types of sleevings, Section 103 General purpose grade sleeving with unilateral tolerances with temperature

100 IS 11654(Part 3/Sec Flexible insulating sleeving: Part 3 Specifications Oct 2010 1 for individual types of sleevings, Section 403 Glass textile sleeving with acrylic based coating - High breakdown strength

101 IS 11654(Part 3/Sec Flexible insulating sleeving: Part 3 Specifications Oct 2010 for individual types of sleevings, Section 404 Glass textile sleeving with acrylic based coating - Medium breakdown strength

102 IS 11654(Part 3/Sec Flexible insulating sleeving: Part 3 Specifications Oct 2010 for individual types of sleevings, Section 405 Glass textile sleeving with acrylic based coating - Lower breakdown strength

103 IS 11654(Part 3/Sec Flexible insulating sleeving: Part 3 Specifications Oct 2010 1 for individual type of sleevings, Section 406 Glass textile sleeving with PVC based coating - High breakdown strength

104 IS 11654(Part 3/Sec Flexible insulating sleeving: Part 3 Specifications Oct 2010 for individual type of sleevings, Section 407 Glass textile sleeving with PVC based coating - Medium breakdown strength

105 IS 11654(Part 3/Sec Flexible insulating sleeving: Part 3 Specifications Oct 2010 for individual type of sleevings, Section 408 Glass textile sleeving with PVC based coating - Lower breakdown strength

106 IS 11731(Part 1):1986 Methods of test for determination of flammability Oct 2006 | IEC 60107(1981) of solid electrical insulating materials when exposed to an igniting source: Part 1 Horizontal

107 IS 11731(Part 2):1986 Methods of test for determination of flammability Oct 2006 | IEC 60707(1981) of solid electrical insulating materials when exposed to an igniting source: Part 2 Vertical

108 IS 11755:1986 Method of test for determination of electrical Oct 2006 | IEC 60345(1971) resistance and resistivity of insulating materials at elevated temperatures

109 IS 11756:1986 Method of test for co-efficients of friction of Oct 2006 1 | IEC 60648(1979) plastic film and sheeting for use as electrical 110 IS 12316(Part 1):1988 Non-cellulosic papers for electrical purposes: Part Oct 2010 1 Definitions and general requirements * INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS

14

111 IS 12316(Part 2):1988 Non-cellulosic papers for electrical purposes: Part Oct 2010 2 Methods of test

112 IS 12316(Part 3/Sec 1):1988 Non-cellulosic papers for electrical purposes: Part Oct 2010 3 Requirements for individual materials, Section 1 Unfilled aramid (Aromatic Polyamide) Papers, calendared

113 IS 12316(Part 3/Sec 2):1988 Non-cellulosic papers for electrical purposes: Part Oct 2010 3 Requirements for individual materials, Section 2 Unfilled aramid (Aromatic Polyamide) Paper, uncalendered

114 IS 12317(Part 1):1988 Ceramic and glass insulating materials for Oct 2010 | IEC 60672-1(1980) telecommunication and allied purposes: Part 1 General requirements and classification of ceramic and glass insulating materials

115 IS 12747(Part 1):2011 Combined flexible materials for electrical insulation / IEC 60626-1(2009) - Part 1 Definition and general requirements (first revision )

116 *IS 12747(Part 2):1989 Combined flexible materials for electrical Oct 2010 | IEC 60626-2(1978) insulation: 117 *IS 12747(Part 3):1998 Combined flexible materials for electrical Nov 2008 / IEC 60626-3(1996) insulation: 118 IS 13066:1991 Prepreg based on glass woven fabric for electrical Oct 2006 applications

119 IS 13233:1991 Low voltage high current arc resistance test - Oct 2006 Method of test

120 IS 13335:1992 Muscovite mica scrap for mica paper Apr 2008

121 IS 13357:1992 Methods of grading and visual classification of Apr 2008 muscovite mica splittings

122 IS 13465(Part 1):2005 Resin based reactive compounds used for Apr 2010 / IEC 60455-1(1998) electrical insulation: Part 1 Definitions and general requirements (first revision)

123 IS 13465(Part 2):2005 Resin based reactive compounds used for Sep 2010 / IEC 60455-2(1998) electrical insulation: Part 2 Methods of test [first 124 IS 13465(Part 3/Sec 1):2006 Resin based reactive compounds used for Apr 2011 / IEC 60455-3-1(2003) electrical insulation - Part 3: Specification for individual materials - Section 1: Unfilled epoxy resinous compounds (first revision)

125 IS 13465(Part 3/Sec 2):2006 Resin based reactive compounds used for Apr 2011 / IEC 60455-3-2 electrical insulation - Part 3: Specification for individual materials - Section 2: Quartz filled epoxy resinous compounds [first revision]

126 IS 13465(Part 3/Sec 3):2006 Resin based reactive compounds used for Apr 2011 / IEC 60455-3-3 electrical insulation - Part 3: Specification for individual materials - Section 3: Unfilled polyurethane compounds [first revision) * INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS

15

127 IS 13465(Part 3/Sec 4):2006 Resin based reactive compounds used for Apr 2011 / IEC 60455-3-4 electrical insulation - Part 3: Specification for individual materials - Section 4: Filled polyurethane compounds (first revision)

128 IS 13465(Part 3/Sec 5):1998 Solventless polymerisable compounds used for May 2008 electrical insulation: Part 3 Specification for individual materials, Section 5 Epoxy phynol

129 IS 13465(Part 3/Sec 6):2006 Resin based reactive compounds used for Jul 2011 / IEC 60455-3-5(2001) electrical insulation - Part 3: Specification for individual materials - Section 6: Unsaturated polyester based impregnating resins

130 IS 13508:1992 Test procedure for measurement of loss of tangent Feb 2008 1 | IEC 60894(1987) angle of coils and bars for machine winding-guide 131 IS 13884:1993 Muscovite mica flakes and mica powder for Apr 2008 industrial applications

132 IS 14353:1996 Guide for determining compatibility between Oct 2006 enamelled winding wires and impregnating

133 IS 14672:1999 Method of test for high voltage, low current Aug 2009 dry arc resistance of solid electrical insulation

134 IS 15208:2002 Specification for unidirectional fibre glass tape Sep 2007

135 IS 15218(Part 1):2002 Electrical insulating materials - Determination of Oct 2007 the lonizing radiation: Part 1 Effects of radiation interaction and dosimetry

136 IS 15652:2006 Insulating mats for electrical purposes - Apr 2011 2 | IEC 61111(2002) Specification (Superseding IS: 5424) 137 IS 60371(Part 3/Sec 1):2006 Specification for insulating materials based on / IS/IEC 60371-3-1:06) mica – Part 3: Specification for individual materials – Sheet 1: Commutator separators and materials (first revision of IS 9299(Part 3/Sec 1)

FINALISED DRAFTS UNDER PRINT

1 DOC.ETD 2(6084) Electrical Insulation – Thermal Evaluation and designation (Second Revision of IS 1271)

2 DOC.ETD 2(6085) Specification for insulating materials based on mica – Part 1 : Definitions and general requirements [first revision of IS 9299(Part 1)]

3 DOC.ETD 2(6086) Specification for insulating materials based on mica – Part 2 : Methods of test (Second Revision of IS 9299(Part 2)

4 DOC.ETD 2(6090) Specification for insulating materials based on mica – Part 3: Specification for individual materials – Sheet 2 : Mica paper (first revision of IS

5 DOC.ETD 2(6091) Specification for insulating materials based on mica – Part 3: Specification for individual materials – Sheet 3 : Rigid mica materials for heating equipment (first revision of IS 9299(Part 3/Sec 3)


16

6 DOC.ETD 2(6092) Specification for insulating materials based on mica – Part 3: Specification for individual materials – Sheet 4 Polyester film-backed mica Paper with a B-stage epoxy Resin binder (first revision of IS 9299(Part 3/Sec 4)

7 DOC.ETD 2(6093) Specification for insulating materials based on mica – Part 3: Specification for individual materials – Sheet 5 : Glass-backed mica paper with an epoxy resin binder for post- Impregnation (VPI) (first revision of IS 9299(Part 3/Sec 5)

8 DOC.ETD 2(6094) Specification for insulating materials based on mica – Part 3: Specification for individual materials – Sheet 6 : Glass-backed mica paper With a B- stage epoxy resin binder (first revision of IS

9 DOC.ETD 2(6095) Insulating materials based on mica – Part 3 : Specification for individual materials – Sheet 7 : Polyester film mica paper with an epoxy resin binder for single conductor taping (first revision of IS 9299(Part 3/Sec 7)

10 DOC.ETD 2(6096) Insulating materials based on mica – Part 3 : Specification for individual materials – Sheet 8 : Mica paper tapes for flame-resistant security cables

11 DOC.ETD 2(6097) Insulating materials based on mica – Part 3 : Specification for individual materials – Sheet 9 : Moulding micanite

12 DOC.ETD 2(6176) Electrical insulating materials - Thermal endurance properties - Part 2: Determination of thermal endurance properties of electrical insulating materials - Choice of test criteria [First Revision of

13 DOC.ETD 2(6177) Electrical insulating materials - Thermal endurance properties - Part 3: Instructions for calculating thermal endurance characteristics [First Revision of IS 8504(Part 4)]

14 DOC.ETD 2(6178) Electrical insulating materials - Thermal endurance properties - Part 4-1: Ageing ovens - Single- chamber ovens

15 DOC.ETD 2(6179) Electrical insulating materials - Thermal endurance properties - Part 4-2: Ageing ovens - Precision ovens for use up to 300 °C

16 DOC.ETD 2(6180) Electrical insulating materials - Thermal endurance properties - Part 4-3: Ageing ovens - Multi-chamber ovens

17 DOC.ETD 2(6181) Electrical insulating materials - Thermal endurance properties - Part 5: Determination of relative thermal endurance index (RTE) of an insulating

18 DOC.ETD 2(6182) Electrical insulating materials - Thermal endurance properties - Part 6: Determination of thermal endurance indices (TI and RTE) of an insulating material using the fixed time frame method * INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS

17

19 DOC.ETD 2(6185) Electrical insulating materials – Properties of thermal endurance – Part 1: Ageing procedures and evaluation of test results [Second Revision of IS 8504(Part 1)](IEC 60216-1)

20 DOC.ETD 2(6270) Combined flexible materials for electrical insulation - Part 2 Method of test [First Revision of IS 12747(Part 2)]

DRAFT STANDARDS FINALIZED BUT NOT YET UNDER PRINT

1 DOC.ETD 2(6183) Varnishes used for electrical insulation - Part 3: Specifications for individual materials - Sheet 1: Ambient curing finishing varnishes [second revision of IS 10026(Pt 3/Sec. 1)]

2 DOC.ETD 2(6186) Varnishes used for electrical insulation – Part 1: Definition and general requirements [Second Revision of IS 10026(Part 1)] (IEC 60464-1)

3 DOC.ETD 2(6187) Varnishes used for electrical insulation – Part 2: Methods of test [Second Revision of IS 10026(Part 2)] (IEC 60464-2)

4 DOC.ETD 2(6188) Varnishes used for electrical insulation – Part 3: : Specifications for individual materials – Sheet 2: Hot curing impregnating varnishes [Second Revision of IS 10026(Part 3/Sec 2)] (IEC 60464-3-

5 DOC.ETD 2(6292) Combined flexible materials for electrical insulation – Part 3: Specifications for individual materials [First Revision of IS 12747(Part 3] * INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS

18

ETD 3 FLUIDS FOR ELECTROTECHNICAL APPLICATIONS SCOPE To prepare product specifications, test methods as well as maintenance and use guides for liquid and gaseous dielectric. Also to prepare specifications and maintenance and use guides for lubricants and control fluids for turbines, generators and control systems as well as to assist in the preparations of test methods for such fluids

Sl. No. IS Number/ DOC Number Title Reaffirm No. of Date Amd. STANDARDS PUBLISHED 1 *IS 335:1993 New insulating oils (fourth revision) Mar 2010 2

2 IS 1866:2000 Code of practice for maintenance and supervision Dec 2010 1 | IEC 60296(1982) of mineral insulating oil in equipment (third revision) 3 IS 6103:1971 Method of test for specific resistance (resistivity) Oct 2011 1 of electrical insulating liquids

4 IS 6104:1971 Method of test for interfacial tension of oil against Oct 2011 1 water by the ring method

5 IS 6262:1971 Method of test for power factor and dielectric Oct 2011 constant of electrical insulating liquids

6 IS 6792:1992 Method for determination of electric strength of Apr 2008 2 | IEC 60156(1963) insulating oils (first revision) 7 IS 6855:2003 Method of sampling for liquid dielectrics Oct 2008

8 IS 9434:1992 Guide for sampling and analysis of free and Apr 2008 | IEC 60567(1977) dissolved gases and oil from oil-filled electrical equipment (first revision)

9 IS 9960:1981 Electrical grade castor oil for use as capacitor Oct 2011 impregnant

10 IS 10593:2006 Mineral oil-impregnated electrical equipment in Sep 2011 / IEC 60599(1999) service - Guide to the interpretation of dissolved and free gases analysis (second revision)

11 IS 11549:1986 Impregnating oils and compounds for paper Apr 2008 insulated cables upto 33 kV

12 IS 11697:1986 Guide for determination of lightning impulse electric Oct 2011 strength of insulating liquids

13 IS 12026(Part 1):1986 Guide for the determination of the aromatic Oct 2011 | IEC 60590(1977) hydrocarbon content of new insulating oils: Part 1 Absorption chromatographic method

14 IS 12026(Part 2):1986 Guide for the determination of the aromatic Oct 2011 hydrocarbon content of new insulating oils: Part 2 Infra red spectrophotometric method

15 IS 12177:1987 Methods of tests for oxidative ageing of electrical Apr 2008 1 insulation of petroleum oils by the open beaker

16 IS 12422:1988 Test method for oxidation stability of inhibited Apr 2008 | IEC 60474(1977) mineral insulating oils


19

17 IS 12463:1988 Inhibited mineral insulating oils Apr 2008 1

18 IS 12475(Part 1):1988 Gassing of insulating liquid under electric stress Apr 2008 and ionization: Part 1 Method of determination of gassing rate under hydrogen atmosphere

19 IS 12475(Part 2):1988 Gassing of insulating liquids under electric stress Apr 2008 and ionization: Part 2 Method of determination of gassing rate under nitrogen atmosphere

20 IS 12958:1990 Oxidation stability of inhibited mineral insulating oil Oct 2011 1 by rotating bomb - Method of test

21 IS 13067:1991 Impregnants for power capacitors Oct 2011

22 IS 13072:1991 Sulphur hexafluoride for electrical purposes Oct 2011 / IEC 60376 (1971) 23 *IS 13155:1991 Method of test for carbon type analysis of mineral Oct 2011 oils by infra-red spectrophotometry

24 IS 13236:1991 Methods for counting and sizing particles in Oct 2011 / IEC 60970(1989) insulating liquids 25 IS 13503:1992 General classification of insulating liquids Apr 2008 / IEC 61039(1990) 26 IS 13567:1992 Determination of water in insulating liquids and in Apr 2008 oil-impregnated paper and pressboard by automatic coulometric Karl Fischer titration - Method of test

27 IS 13631:2000 Method of test for detection and determination of Apr 2008 1 | IEC 60666(1979) antioxidant additives in insulating oils 28 IS 15668:2006 Mineral insulating oils - Methods for the Jun 2011 / IEC 61198(1993) determination of 2-furfural and related compounds DRAFT STANDARDS ISSUED IN WIDE CIRCULATION

1 DOC.ETD 3(6251) Fluids for Electrotechnical Applications – Unused Mineral Insulating Oils for Transformers and Switchgear (Fifth Revision of IS 335)

2 DOC.ETD 3(6352) Insulating liquids - Specifications for unused synthetic organic esters for electrical purposes

3 DOC.ETD 3(6353) Classification of insulating liquids according to fire- point and net calorific value

4 DOC.ETD 3(6354) Synthetic organic esters for electrical purposes - Guide for maintenance of transformer esters in

5 DOC.ETD 3(6355) Specification for unused insulating mineral oils for cables with oil ducts

6 DOC.ETD 3(6356) Mineral oil-filled electrical equipment – Application of dissolved gas analysis (DGA) to factory tests on electrical equipment

7 DOC.ETD 3(6357) Insulating liquids - Contamination by polychlorinated biphenyls (PCBs) - Method of determination by capillary column gas


20

8 DOC.ETD 3(6358) Insulating liquids - Determination of the dielectric dissipation factor by measurement of the conductance and capacitance - Test method

9 DOC.ETD 3(6359) Mineral insulating oils - Determination of kinematic viscosity at very low temperatures

10 DOC.ETD 3(6360) Oil-filled electrical equipment – Sampling of gases and of oil for analysis of free and dissolved gases – guidance (Second Revision)

11 DOC.ETD 3(6361) Specification of technical grade Sulfur hexafluoride (SF6) for use In electrical equipment (First

12 DOC.ETD 3(6362) Insulating liquids – methods for counting and sizing particles (first revision)

13 DOC.ETD 3(6363) Classification of insulating liquids (first revision)


21

ETD 6 ELECTRICAL INSULATORS AND ACCESSORIES SCOPE To prepare standards regarding insulated bushing, insulators for overhead lines, insulators for sub-stations and jointing accessories which are integral parts of insulators


STANDARDS PUBLISHED

1 IS 283:1976 Porcelain insulators for telegraph and telephone Jul 2006 4 lines (third revision)

2 IS 731:1971 Porcelain insulators for overhead power lines with a Jul 2006 7 nominal voltage greater than 1000 V (second

3 IS 1441:1989 Insulator stalks for telegraph and telephone lines Apr 2009 (second revision)

4 IS 1445:1977 Porcelain insulators for overhead power lines with Apr 2009 5 a nominal voltage up to andincluding 1 000 V (second revision)

5 IS 2099:1986 Bushings for alternating voltages above 1 000 Apr 2008 2 Volts (second revision)

6 IS 2486(Part 1):1993 Metal fittings of insulators for overhead power lines Apr 2008 with nominal voltage greater than 1000 V - Specification : Part 1 General requirements and tests (first

7 IS 2486(Part 2):1989 Insulator fittings for overhead power lines with Apr 2009 | IEC 120 (1984) nominal voltage greater than1000 V - Specification :

8 IS 2486(Part 3):1974 Specification for Insulator fittings for overhead Jul 2006 | IEC 372-1 (1971) power lines with a nominal voltage greter than 1000 Volts: Part 3 Locking devices

9 IS 2486(Part 4):1981 Specification for Insulator fittings for overhead Jul 2006 | IEC 372-2 (1976) power lines with a nominal voltage greater than 1000 V: Part 4 Test for locking devices

10 IS 2544:1973 Porcelain post insulators for systems with nominal Jul 2006 4 | IEC 168 (1964) voltage greater than 1000 Volts (first revision) 11 IS 3188:1980 Characteristics of string insulator units (first Apr 2009

12 IS 3347(Part 1/Sec 1):1979 Dimensions for porcelain transformer bushings for Apr 2009 1 use in lightly polluted atmospheres: Part 1 Upto and including 1 kV, Section 1 Porcelain parts (first

13 IS 3347(Part 1/Sec 2):1979 Dimensions for porcelain transformer bushings for Apr 2009 3 use in lightly polluted atmospheres: Part 1 Up to and including 1 kV, Section 2 Metal parts (first

14 IS 3347(Part 2/Sec 1):1979 Dimensions for porcelain transformer bushings for Apr 2009 1 use in lightly polluted atmospheres: Part 2 3.6 kV bushings, Section 1 Porcelain Parts (first revision)


22

15 IS 3347(Part 2/Sec 2):1979 Dimensions for porcelain transformer bushings for Apr 2009 3 use in lightly polluted atmospheres: Part 2 3.6 kV bushings, Section 2 Metal parts (first revision)

16 IS 3347(Part 3/Sec 1):1988 Dimensions for porcelain transformer bushings for Apr 2009 use in lightly polluted atmospheres: Part 3 17.5 kV bushings, Section 1 Porcelain parts (second

17 IS 3347(Part 3/Sec 2):1982 Dimensions for porcelain transformer bushings for Apr 2009 2 use in lightly polluted atmospheres: Part 3 17.5 kV bushings, Section 2 Metal parts (first revision)

18 IS 3347(Part 4/Sec 1):1988 Dimensions for porcelain transformer bushings for Apr 2009 1 use in lightly polluted atmospheres: Part 4 24 kV bushings, Section 1 Porcelain parts (Second

19 IS 3347(Part 4/Sec 2):1982 Dimensions for porcelain transformer bushings for Apr 2009 3 use in lightly polluted atmospheres: Part 4 24 kV bushings, Section 2 Metal Parts (first revision)

20 IS 3347(Part 5/Sec 1):1979 Dimensions for porcelain transformer bushings for Apr 2009 1 use in lightly polluted atmospheres: Part 5 36 kV bushings, Section 1 Porcelain parts (second revision)

21 IS 3347(Part 5/Sec 2):1979 Dimensions for porcelain transformer bushings for Apr 2009 2 use in lightly polluted atmospheres: Part 5 36 kV bushings, Section 2 Metal parts (first revision)

22 IS 3347(Part 8/Sec 1):1988 Dimensions for procelain transformer bushings for Apr 2009 use in lightly polluted atmospheres: Part 8 52 kV bushings, Section 1 Porcelain parts

23 IS 3347(Part 8/Sec 2):1992 Dimensions for porcelain transformer bushings for Apr 2009 use in lightly polluted atmospheres: Part 8 52 kV bushings: Section 2 Metal parts

24 IS 4257(Part 1):1981 Dimensions for clamping arrangements for Apr 2009 1 porcelain transformer bushings: Part 1 For 12 kV to 36 kV bushings (first revision)

25 IS 4257(Part 2):1986 Dimensions for clamping arrangements for Apr 2009 porcelain transformer bushings: Part 2 For 72.5 kV and 123 kV bushings

26 IS 4318:1993 Solid core porcelain insulators for overhead traction Apr 2008 lines (first revision)

27 IS 5300:1969 Specification for porcelain guy strain insulators Apr 2009

28 IS 5350(Part 1):1970 Dimensions of indoor and outdoor porcelain post Apr 2009 2 | IEC 273 (1968) insulator and post insulator units for system with nominal voltage greater than 1000 V: Part 1 Indoor post insulators

29 **IS 5350(Part 2):1973 Dimensions of indoor and outdoor porcelain post Apr 2009 insulators and post insulator units for system with nominal voltage greater than 1000 V: Part 2 Outdoor cylindrical post insulators

30 IS 5350(Part 3):1971 Dimensions of indoor and outdoor porcelain post Apr 2009 3 | IEC 273 (1968) insulators and post insulator units for system with nominal voltages greater than 1000 V: Part 3 Outdoor pedestal post insulators * INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS

23

31 IS 5621:1980 Hollow insulators for use in electrical equipment Apr 2009 2 (first revision)

32 IS 7421:1988 Porcelain bushings for alternating voltage upto and Apr 2009 including 1000 V (first revision)

33 IS 7648:1975 Silicone compound for application on high voltage Apr 2009 porcelain insulators

34 IS 7935:1975 Insulator fittings for overhead power lines with a Jul 2006 3 nominal voltage upto and including 1000 V

35 IS 8263:1976 Methods for radio interference test on high voltage Apr 2009 insulators

36 IS 8269:1976 Methods for switching impulse tests on high Apr 2009 voltage insulators

37 IS 8603:2008 Dimensions for procelain transformers bushings Sep 2008 for use heavily polluted atmospheres 12/17.5kv, 24kv and 36 kv (first revision of IS 8603 (Part 1,2

38 IS 8603(Part 4):2003 Dimensions for porcelain transformers bushings Oct 2008 for use in heavily polluted atmospheres: Part 4 52 kV bushings

39 IS 8704:1995 Artificial pollution on high voltage insulators to be Oct 2011 | IEC 507 (1991) used on ac systems (first revision) 40 IS 8765:1978 Ceramic insulating materials for electrical Apr 2009 1

41 IS 9431:1979 Indoor post insulators of organic material for Apr 2009 systems with nominal voltages greater than 1 000 V upto and including 300 kV

42 IS 10136:1982 Code of practice for selection of disc insulator Jul 2006 fittings for highest system voltages of 72.5 kV

43 IS 10314:1982 Dimensions for ceramic bushings for terminals Jul 2006

44 IS 12676:1989 Oil impregnated paper insulated condenser Jul 2006 bushings - Dimensions and requirements

45 IS 13134:1992 Guide for the selection of insulators in respect of Apr 2008 pollution conditions

46 IS 13305:1992 Permissible limits of visual defects for insulating Apr 2008 porcelains for electrical circuits

47 IS 13312:1992 Dimensions of porcelain oil filled transformer Apr 2008 bushings (rated 52 kV) for medium polluted

48 IS 15137:2002 Metal Connecting Lugs for Porcelain Transformer Dec 2007 Bushings - Specification


24

ETD 7 LOW VOLTAGE SWITCHGEAR & CONTROLGEAR SCOPE To prepare standards for switchgear and controlgear such as circuit breakers, switches, contactors, starters, disconnectors, bus bars, fuse combination units and semiconductors connectors and any switchgear assemblies for voltages upto and including 1 000 V ac or 1 200 V dc


STANDARDS PUBLISHED

1 IS 1356(Part 1):1972 Electrical equipment of machine tools: Mar 2011 | IEC 60204-1 Part 1 Electrical equipment of machines for general use (second revision)

2 IS 2675:1983 Enclosed distribution fuseboards and cutouts for Mar 2011 voltages not exceeding 1000 V (second revision)

3 IS 5039:1983 Distribution pillars for voltages not Mar 2011 exceeding 1 000 volts (first revision)

4 IS 8588(Part 1):1977 Thermostatic bimetals: Mar 2008 1 Part 1 General requirements and methods of tests

5 IS 8623(Part 1):1993 Specification for low voltage switchgear Mar 2008 / IEC 60439-1(1985) and controlgear assemblies: Part 1 Requirements for type-tested and partially type tested assemblies (first revision)

6 IS 8623(Part 2):1993 Specification for low voltage switchgear Mar 2008 / IEC 60439-2(1987) and controlgear assemblies: Part 2 Particular requirements for busbar trunking systems (busways)-(first revision)

7 IS 8623(Part 3):1993 Low-voltage switchgear and controlgear Mar 2008 / IEC 60439-3(1990) assemblies: Part 3 Particular requirements for equipment where

8 IS 10027:2000 Composite units of air-break switches and rewirable Mar 2010 type fuses for voltages not exceeding 650 volt ac

9 IS 12021:1987 Specification for control transformers for Mar 2010 2 Switchgear and controlgear for voltages not exceeding 1000

10 IS 12640(Part 1):2008 Residual current operated circuit-breakers for / IEC 61008-1:1996 household and simililar uses : Part 1 circuit- breakers without integral overcurrent protection(RCCBs) (first revision)

11 IS 12640(Part 2):2008 Residual current operated circuit breakers for / IEC 61009-1:1996 household and similar uses: Part 2 circuit breakers with integral overcurrent protection(RCBOs) (First Revision)

12 IS 13032:1991 Miniature circuit breaker boards for Mar 2011 1 voltage upto and including 1 000 Volt ac

13 IS 13947(Part 5/Sec 2):2004 Low voltage switchgear and controlgear : Jun 2009 / IEC 60947-5-2(2000) Part 5 Control circuit devices and switching elements Section 2 Proximity switches


25

14 IS 14577:1998 Short-circuit current evaluation with special regard Jun 2008 / IEC 60363(1998) to rated short-circuit capacity of circuit-breakers in installations in ships

15 IS 14614:1998 Residual Current Operated Protective Mar 2008 / IEC 61543(1995) Devices (RCDs) for household and similar use - Electromagnetic compatibility.

16 IS 60715:1981 Dimensions of Low-voltage swtichgear and / IS/IEC 60715:1981 controlgear - Standardized mounting on rails of mechanical support of electrical devices in switchgear and controlgear

17 IS 60898(Part 1):2002 Electrical Accessories - circuit breakers for over / IS/IEC 60898-1:2002 protection for household and similar installations Part 1 Circuit breakers for a.c. . operation ( Superseding IS 8828)

18 IS 60898(Part 2):2003 Electrical Accessories - circuit breakers for over / IS/IEC 60898-2:2003 protection for household and similar installations Part 2 Circuit breakers for a.c. and d.c. operation

19 IS 60947(Part 1):2004 Low voltage switchgear and controlgear: Part 1 / IS/IEC 60947-1:2004 General Rules (Superseding IS 13947(Part 1) (IEC 60947-1(2004))

20 IS 60947(Part 2):2003 Low voltage switchgear and controlgear: Part 2 / IS/IEC 60947-2:2003 Circuit breakers[Superseding IS 13947( Part 2 21 IS 60947(Part 3):1999 Low voltage switchgear and controlgear : Part 3 / IS/IEC 60947-3:1999 Switches, disconnectors, switch-disconnectors and fuse combination units [Superseding IS 13947(Part

22 IS 60947(Part 4/Sec 1):2000 Low-Voltage switchgear and controlgear: Part 4 / ISIEC 60947-4-1:2000 Contactors and motor starters,Section 1 Electromechanical contactors and motor starters[superseding IS 13947(Part 4/Sec 1)

23 IS 60947(Part 4/Sec 2):1999 Low voltage switchgear and controlgear: Part 4 / ISIEC 60947-4-2:1999 Contactors and motors starters Section 2 ac Semiconductor Motor Controllers and Starters

24 IS 60947(Part 4/Sec 3):1999 Low voltage switchgear and controlgear :Part 4 / ISIEC 60947-4-3:1999 Contactors and motor starters Section 3 AC semiconductor controllers and contactors for non- motor loads

25 IS 60947(Part 5/Sec 1):2003 Low-voltage switchgear and controlgear: - / ISIEC 60947-5-1:2003 Part 5 Control circuit devices and switching elements, Section 1 Electromechanical control circuit devices (Sperseding of IS 13947 Part 5/Sec


1 DOC.ETD 7(6082) Low-voltage switchgear and controlgear: / IS/IEC 60947-1:2007 Part 1 General rules (IEC 60947-1) 2 DOC.ETD 7(6083) Low voltage switchgear and controlgear : / IS/IEC60947-5-2:2007 Part 5 Control circuit devices and switching elements Section 2 Proximity switches (60947-5- * INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS

26


1 DOC.ETD 7(6079) Low voltage switchgear and controlgear :Part 4 Contactors and motor starters Section 3 AC semiconductor controllers and contactors for non- motor loads( IEC 60947-4-3)

2 DOC.ETD 7(6080) Low-Voltage switchgear and controlgear: Part 4 Contactors and Motor Starters,Section 2 AC Semiconductor Motor controllers and Starters (IEC 60947-4-2:2007)

DRAFT STANDARDS ISSUED IN WIDE CIRCULATION

1 DOC.ETD 7(6255) Low voltage switchgear and controlgear : Part 3 Switches, disconnectors, switch- disconnectors and fuse combination units (First Revision) (IEC 60947-3:2008, ED 3.0)

2 DOC.ETD 7(6256) Low-Voltage switchgear and controlgear: Part 4 Contactors and motor starters,Section 1 Electromechanical contactors and motor starters[superseding IS 13947(Part 4/Sec 1) (IEC 60947-4-1:2009, Ed 3.0)

3 DOC.ETD 7(6257) Amendment No. 1 to IS/IEC 60947-5-1:2003 Low- voltage switchgear and controlgear: - Part 5 Control circuit devices and switching elements, Section 1 Electromechanical control

4 DOC.ETD 7(6273) Low voltage switchgear and controlgear: Part 2 Circuit breakers (IEC 60947-2:2006) (first revision)

5 DOC.ETD 7(6311) Low voltage surge protective devices - Part 12 : Surge protective devices connected to low-voltage power distribution systems - Selection and application principles (IEC 61643-12:2008)

6 DOC.ETD 7(6312) Low voltage surge protective devices - Part 1: Surge protective devices connected to low-voltage power distribution systems (IEC 61643-1:2005)

DRAFT STANDARDS FORMULATED

1 DOC.ETD 7(6332) Draft Guidelines for application of aluminum conductors for low voltage switchgear and controlgear as per IS/IEC 60947-1

2 DOC.ETD 7(6334) Specification for control transformers for switchgear and controlgear for voltages not exceeding 1000


27

ETD 8 HIGH VOLTAGE SWITCHGEAR AND CONTROLGEAR SCOPE To prepare standards for switchgear and controlgear; such as circuit breakers, switches contactors, starters, disconnectors, busbars and any switchgear assemblies for voltages more than 1000 V ac


STANDARDS PUBLISHED

1 IS 3427:1997 A.C. Metal enclosed swtiichgear and controlgear for Sep 2007 1 / IEC 60298:1990 rated voltages above 1kV upto and including 52 kV(first revsion)

2 IS 5561:1970 Electric power connectors Sep 2007

3 IS 7567:1993 Automatic circuit reclosers(second revision) Sep 2007

4 IS 8084:1976 Interconnecting busbars for ac voltage above 1 kV Sep 2007 upto and including 36 kV

5 IS 9135:1979 Guide for testing of circuit breakers with respect to Sep 2007 out-of-phase switching

6 *IS 9920(Part 1):2002 High Voltage Switches - Part 1 : Switches for Sep 2007 / IEC 60265:1998 Rated Voltages Above 1 kV and Less Than 52 KV 7 IS 9920(Part 2):2001 High voltage switches : Part 2 High voltage Mar 2011 / IEC 60265-2:1988 switches for rated voltages of 52 kV and above 8 *IS 9920(Part 3):1982 Switches and switch isolators for voltages above Sep 2007 | IEC 60129:1975 1000 V: Part 3 Design and construction 9 *IS 9920(Part 4):1985 Switches and switch isolators for voltages above Sep 2007 | IEC 60129:1975 1000 V: Part 4 Type tests and routine tests 10 *IS 9921(Part 1):1981 Alternating current disconnectors (isolators) and Sep 2007 | IEC 60129:1975 earthing switches for voltages above 1000 V: Part 1 General and definitions

11 *IS 9921(Part 2):1982 Alternating current disconnectors (isolators) and Sep 2007 | IEC 60129:1975 earthing switches for voltages above 1000 V: Part 2 Rating

12 *IS 9921(Part 3):1982 Alternating current disconnectors (isolators and Sep 2007 | IEC 60129:1975 earthing switches for voltages above 1 000 V: Part 3 Design and construction

13 *IS 9921(Part 4):1985 Alternating current disconnectors (isolators) and Sep 2007 | IEC 60129:1975 earthing switches for voltages above 1000 V: Part 4 Type tests and routine tests

14 *IS 9921(Part 5):1985 Alternating current disconnectors (isolators) and Sep 2007 | IEC 60129:1975 earthing switches for voltages above 1 000 V: Part 5 Informations to be given with tenders, inquiries and orders

15 IS 10601:1983 Dimensions of terminals of high voltage switchgear Oct 2010 and controlgear


28

16 IS 12729:2004 Common specification for high voltage switchgear Sep 2007 / IEC 60694 :1996 and controlgear standards (first revsion ) 17 IS 13118:1991 General requirements for circuit breakers Sep 2007 / IEC 60056:1987 for voltages above 1 000 V (Superseding all Parts and Sections of IS 2516)

18 IS 13516:1993 Methods of synthetic testing of high voltage Apr 2008 / IEC 60427:1989 alternating current circuit breakers 19 IS 14657:1998 Gas-insulated metal-enclosed switchgear for rated Apr 2008 / IEC 61259:1994 voltage 72.5 kV and above - requirements for switching of bus-charging current by

20 IS 14658:1999 High-voltage alternating current circuit-breakers- Apr 2009 / IEC 61633:1995 Guide for short-circuit and switching test procedures for metal-enclosed and dead tank

21 IS 14659:1999 A.C. insulation-enclosed switchgear and controlgear Apr 2009 / IEC 60466:1987 for rated voltage above 1 kV and upto and including 38 kV

22 IS 14666:1999 High voltage alternating current switch fuse Apr 2009 / IEC 60420:1990 combinations 23 IS 14674:1999 High voltage alternating current circuit breakers- Apr 2009 / IEC 61166:1993 Guide for seismic qualifications of high-voltage alternating current circuit-breakers

24 IS 14786:2000 High voltage/ low voltage prefabricated substations Mar 2010 / IEC 61330:1995 25 IS 60470:2000 High Voltage Alternating Current Contactors and / IS/IEC 60470:2000 Contactor-Based Motor-Starters (superceeding IS 9046:1978 and IS 12661(Part 1):1988

26 IS 60517:1990 Gas insulated metal enclosed switchgear for rated Sep 2007 / IS/IEC 60517:1990 voltages of 72.5 KV and above 27 IS 62271(Part 102):2003 High-voltage swithgear and controlgear: / IS/IEC62271-102:2003 Part 102 High-voltage alternating current circuit breakers

28 IS 62271(Part 105):2002 High-voltage swithgear and controlgear: / IS/IEC62271-105:2002 Part 105 Alternating current switch-fuse 29 IS 62271(Part 200):2003 High-voltage switchgear and controlgear: Part 200 / IS/IEC62271-200:2003 AC Metal-Enclosed Switchgear and Controlgear for Rated Voltages Above 1 kV and Up To and

30 IS 62271(Part 201):2006 High-voltage switchgear and controlgear: Part 201 / IS/IEC62271-201:2006 AC Insulation Enclosed Switchgear and Controlgear for Rated Voltages Above 1 kV and Above 52 kV

31 IS 62271(Part 203):2003 High-voltage swithgear and controlgear: Part 203 / ISIEC 62271-203:2003 Gas-insulated metal-enlosed switchgear for rated voltages above 52 kV


1 DOC.ETD 8(6048) High-Voltage switchgear and controlgear: Part 207 / IS/IEC 62271-207 Seismic qualification for gas-insulated switchgear assemblies for rated voltages above 52 kV (IEC 62271-207)


29


1 DOC.ETD 8(6243) High-voltage swithgear and controlgear: / IEC 62271-1 :2007 Part 1 Common Specification (IEC 62271-1 :2007) (Superseding IS 12729)

2 DOC.ETD 8(6244) High-voltage swithgear and controlgear: / IEC 62271-100 :2008 Part 100 Alternating current Circuit Breakers(IEC 62271-100 :2008)

3 DOC.ETD 8(6245) High-voltage swithgear and controlgear: / IEC 62271-109 :2008 Part 109 Alternating current Series Capacitor by pass Switches (IEC 62271-109 :2008)


1 DOC.ETD 8(6281) High-voltage swithgear and controlgear: Part 111 Overhead, pad-mounted, dry valut, and submersible automatic circuit reclosures and fault interrupters for alternating current systems upto 38 kV (IEC 62271-111)

2 DOC.ETD 8(6309) High-voltage swithgear and controlgear: Part 104 Alternating current switches for rated voltage of 52 kV and above (IEC 62271-104:2009)

3 DOC.ETD 8(6341) High-voltage swithgear and controlgear: Part 202 Prefericated substation (Superseding IS 14786) (IEC 62271-202:2006) * INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS

30

ETD 9 POWER CABLES SCOPE To prepare standards for electric cables and their accessories, without limitations of voltage, current or form of construction but excluding cables for telecommunications and electronic equipment and such other cables as fall within the scope of other committees


STANDARDS PUBLISHED

1 IS 692:1994 Paper insulated lead-sheathed cables for rated Feb 2010 2 voltages upto and including 33 kV (third revision)

2 IS 694:2010 Polyvinyl chloride insulated sheathed and unsheathed cables with rigid and flexible conductor for rated voltages upto and including 450/750 V : Part 1 General requirements (fourth revision)

3 IS 694:1990 PVC Insulated cables for working voltages upto Feb 2010 5 | IEC 60227-1to5:1979 and including 1100 V (Third revision) 4 IS 1255:1983 Code of practice for installation and maintenance Nov 2011 of power cables upto and including 33 kV rating (second revision)

5 IS 1554(Part 1):1988 PVC insulated (heavy duty) electric cables: Part 1 Feb 2010 4 | IEC 60502:1983 For working voltages upto and including 1 100 V (third revision)

6 IS 1554(Part 2):1988 PVC insulated (heavy duty) electric cables:Part 2 Feb 2010 3 | IEC 60502:1983 For working voltages from 3.3kV upto and including 11 kV (Second revision)

7 IS 2465:1984 Cables for motor vehicles (second revision) Nov 2011 1

8 IS 2593:1984 Flexible cables for miners' cap lamps (first revision) Nov 2011 1

9 IS 3961(Part 1):1967 Recommended current ratings for cables: Part 1 Nov 2011 1 Paper insulated lead sheathed cables

10 IS 3961(Part 2):1967 Recommended current ratings for cables: Part 2 Nov 2011 2 PVC insulated and PVC sheathed heavy duty

11 IS 3961(Part 3):1968 Recommended current ratings for cables: Part 3 Nov 2011 1 Rubber insulated cables

12 IS 3961(Part 5):1968 Recommended current ratings for cables: Part 5 Nov 2011 PVC insulated light duty cables

13 IS 4289(Part 1):1984 Flexible cables for lifts and other flexible Nov 2011 | IEC 60245-5 connections: Part 1 Elastomer insulated cables 14 IS 4289(Part 2):2000 Flexible cables for lifts and other flexible Feb 2010 | IEC 60227-6:1985 Connections:Part 2 PVC insulated cables 15 IS 5819:1970 Recommended short-circuit ratings of high voltage Nov 2011 PVC cables


31

16 IS 5831:1984 PVC insulation and sheath of electric cables (first Nov 2011 2 | IEC 60502:1983 revision) 17 IS 5950:1984 Shot firing cables (for use other than in shafts) Nov 2011 (first revision)

18 IS 6380:1984 Elastomeric insulation and sheath of electric cables Nov 2011 1 | IEC 60502:1983 (first revison) 19 IS 6554:1983 Soldering ferrules of straight through joints (first Nov 2011 1 revision)

20 IS 7098(Part 1):1988 Cross-linked polyethylene insulated thermosplastic Feb 2010 3 | IEC 60502:1983 sheathed cables - Specification : Part 1 For working voltages upto and including 1 100 V (first

21 IS 7098(Part 2):1985 Crosslinked polyethylene insulated PVC sheathed Feb 2010 2 | IEC 60502:1983 cables: Part 2 For working voltages from 3.3 kV upto and including 33 kV (first revision)

22 IS 7098(Part 3):1993 Crosslinked polyethylene insulated thermoplastic Dec 2008 3 sheathed cables: Part 3 For working voltages from 66 kV upto and including 220 kV

23 *IS 8130:1984 Conductors for insulated electric cables and Nov 2011 | IEC 60228:1978 flexible cords (first revision) 24 IS 8308:1993 Compression type tubular in-line connectors for Dec 2008 aluminium conductors of insulated cables (first

25 IS 8309:1993 Compression type tubular terminal ends for Dec 2008 1 aluminium conductors of insulated cables (first

26 IS 8337:1976 Performance requirements of compression joints Feb 2010 1 of aluminium conductors in insulated cables

27 IS 8394:1977 Soldering and welding type terminal ends for Aug 2007 2 conductors of insulated cables

28 IS 8438:1987 Moulds of cast resin based straight through joints Aug 2007 for cables for voltages upto and including 1 100 V (first revision)

29 IS 9553:1987 Moulds suitable for cast resin based terminations Aug 2007 for cables for voltages upto and including 1 100 V (first revision)

30 IS 9646:1992 Moulds suitable for cast resin-based joints for Dec 2008 cables for voltages upto and including 1 100 V

31 IS 9857:1990 Welding cables (first revision) Feb 2010 1 | IEC 60245-6 32 IS 9968(Part 1):1988 Elastomer insulated cables:Part 1 For working Feb 2010 2 voltages upto and including 1 100 V (first revision) [superseeding IS 434(Parts 1 and 2)]

33 IS 9968(Part 2):2002 Specification for elastomer-insulated cables:Part 2 Aug 2007 2 For working voltages from 3.3 kV upto and including 33 kV (first revision) (superseding

34 IS 10418:1982 Drums for electric cables Nov 2011


32

35 IS 10435(Part 1):1983 Inverted type cable end boxes for outdoor Nov 2011 termination suitable for paper insulated cables : Part 1 Belted type, multi-core cables upto and

36 IS 10462(Part 1):1983 Fictitious calculation method for determination of Nov 2011 | IEC 60502:1978 dimensions of protective coverings of cables:Part 1 Elastomeric and thermoplastic insulated cables

37 IS 10462(Part 2):1991 Fictitious calculation method for determination of Nov 2011 | IEC 60055-2 dimensions of protective coverings of cables: Part 2 Paper insulated cables

38 IS 10606:1983 Cast iron joint boxes for tee and branch trouser Nov 2011 joints suitable for paper insulated cables for voltages upto and including 11 kV

39 IS 10810(Part 0):1984 Methods of test for cables: Part 0 General Nov 2011

40 IS 10810(Part 1):1984 Methods of test for cables: Part 1 Annealing test Nov 2011 for wires used in conductors

41 IS 10810(Part 2):1984 Methods of test for cables: Part 2 Tensile test for Nov 2011 aluminium wires

42 IS 10810(Part 3):1984 Methods of test for cables: Part 3 Wrapping test Nov 2011 for aluminium wires

43 IS 10810(Part 4):1984 Methods of test for cables: Part 4 Persulphate test Nov 2011 of conductor

44 IS 10810(Part 5):1984 Methods of test for cables: Part 5 Conductor Nov 2011 resistance test

45 IS 10810(Part 6):1984 Methods of test for cables: Part 6 Thickness of Nov 2011 thermoplastic and elastomeric insulation and

46 IS 10810(Part 7):1984 Methods of test for cables: Part 7 Tensile strength Nov 2011 and elongation at break of thermoplastic and elastomeric insulation and sheath

47 IS 10810(Part 8):1984 Methods of test for cables: Part 8 Breaking Nov 2011 strength and elongation at break for impregnated paper insulation

48 IS 10810(Part 9):1984 Methods of test for cables: Part 9 Tear resistance Nov 2011 for paper insulation

49 IS 10810(Part 10):1984 Methods of test for cables:Part 10 Loss of mass Nov 2011

50 IS 10810(Part 11):1984 Methods of test for cables:Part 11 Thermal ageing Nov 2011 in air

51 IS 10810(Part 12):1984 Methods of test for cables:Part 12 Shrinkage test Nov 2011

52 IS 10810(Part 13):1984 Methods of test for cables:Part 13 Ozone Nov 2011 resistance test

53 IS 10810(Part 14):1984 Methods of test for cables:Part 14 Heat shock test Nov 2011


33

54 IS 10810(Part 15):1984 Methods of test for cables:Part 15 Hot deformation Nov 2011

55 IS 10810(Part 16):1986 Methods of test for cables:Part 16 Accelerated Nov 2011 ageing test by oxygen pressure method

56 IS 10810(Part 17):1986 Methods of test for cables: Part 17 Tear resistance Nov 2011 test for heavy duty sheath

57 IS 10810(Part 19):1984 Methods of test for cables:Part 19 Bleeding and Nov 2011 blooming test

58 IS 10810(Part 20):1984 Methods of test for cables:Part 20 Cold bend test Nov 2011

59 IS 10810(Part 21):1984 Methods of test for cables:Part 21 Cold impact Nov 2011

60 IS 10810(Part 22):1984 Methods of test for cables:Part 22 Vicat softening Nov 2011

61 IS 10810(Part 23):1984 Methods of test for cables:Part 23 Melt-flow index Nov 2011

62 IS 10810(Part 24):1984 Methods of test for cables:Part 24 Water soluble Nov 2011 impurities test of insulating paper

63 IS 10810(Part 25):1984 Methods of test for cables:Part 25 Conductivity of Nov 2011 water extract test of insulating paper

64 IS 10810(Part 26):1984 Methods of test for cables:Part 26 pH value of Nov 2011 water extract test of insulating paper

65 IS 10810(Part 27):1984 Methods of test for cables:Part 27 Ash content Nov 2011 test of insulating paper

66 IS 10810(Part 28):1984 Methods of test for cables:Part 28 Water Nov 2011 absorption test (Electrical)

67 IS 10810(Part 29):1984 Methods of test for cables:Part 29 Environmental Nov 2011 stress cracking test

68 IS 10810(Part 30):1984 Methods of test for cables:Part 30 Hot set test Nov 2011

69 IS 10810(Part 31):1984 Methods of test for cables:Part 31 Oil resistance Nov 2011

70 IS 10810(Part 32):1984 Methods of test for cables:Part 32 Carbon content Nov 2011 test for polyethylene

71 IS 10810(Part 33):1984 Methods of test for cables:Part 33 Water Nov 2011 2 absorption test (Gravimetric)

72 IS 10810(Part 34):1984 Methods of test for cables:Part 34 Measurement of Nov 2011 thickness of metallic sheath

73 IS 10810(Part 35):1984 Methods of test for cables:Part 35 Determination Nov 2011 of tin in lead alloy for sheathing

74 IS 10810(Part 36):1984 Methods of test for cables:Part 36 Dimensions of Nov 2011 armouring material


34

75 IS 10810(Part 37):1984 Methods of test for cables:Part 37 Tensile strength Nov 2011 and elongation at break of armouring materials

76 IS 10810(Part 38):1984 Methods of test for cables:Part 38 Torsion test on Nov 2011 galvanized steel wires for armouring

77 IS 10810(Part 39):1984 Methods of test for cables:Part 39 Winding test on Nov 2011 galvanized steel strips for armouring

78 IS 10810(Part 40):1984 Methods of test for cables:Part 40 Uniformity of Nov 2011 1 zinc coating on steel armour

79 IS 10810(Part 41):1984 Methods of test for cables:Part 41 Mass of zinc Nov 2011 coating on steel armour

80 IS 10810(Part 42):1984 Methods of test for cables:Part 42 Resistivity test Nov 2011 1 of armour wires and strips and conductance test of armour (wires/strips)

81 IS 10810(Part 43):1984 Methods of test for cables:Part 43 Insulation Nov 2011

82 IS 10810(Part 44):1984 Methods of test for cables:Part 44 Spark test Nov 2011

83 IS 10810(Part 45):1984 Methods of test for cables:Part 45 High voltage Nov 2011

84 IS 10810(Part 46):1984 Methods of test for cables:Part 46 Partial Nov 2011

85 IS 10810(Part 47):1984 Methods of test for cables:Part 47 Impulse test May 2010 1

86 IS 10810(Part 48):1984 Methods of test for cables:Part 48 Dielectric power Nov 2011 factor test

87 IS 10810(Part 49):1984 Methods of test for cables:Part 49 Heating cycle Nov 2011

88 IS 10810(Part 50):1984 Methods of test for cables:Part 50 Bending test Nov 2011

89 IS 10810(Part 51):1984 Methods of test for cables:Part 51 Dripping test Nov 2011

90 IS 10810(Part 52):1984 Methods of test for cables:Part 52 Drainage test Nov 2011

91 IS 10810(Part 53):1984 Methods of test for cables:Part 53 Flammability Nov 2011

92 IS 10810(Part 54):1984 Methods of test for cables:Part 54 Static flexibility Nov 2011

93 IS 10810(Part 55):1986 Methods of test for cables:Part 55 Abrasion test Nov 2011

94 IS 10810(Part 56):1987 Methods of test for cables: Part 56 Accelerated Aug 2007 ageing by air-pressure method

95 IS 10810(Part 57):1987 Methods of test for cables: Part 57 Flexing test Aug 2007


35

96 IS 10810(Part 58):1998 Methods of test for cables: Part 58 Oxygen index Dec 2008

97 IS 10810(Part 59):1988 Methods of test for cables: Part 59 Determination May 2010 of the amount of halogen acid gas evolved during combustion of polymeric materials taken from

98 IS 10810(Part 60):1988 Methods of test for cables: Part 60 Thermal May 2010 stability of PVC insulation and sheath

99 IS 10810(Part 61):1988 Methods of test for cables: Part 61 Flame May 2010 1 retardant test

100 IS 10810(Part 62):1993 Methods of test for cables: Part 62 Fire resistance Dec 2008 test for bunched cables

101 IS 10810(Part 63):1993 Methods of test for cables: Part 63 Smoke density Dec 2008 of electric cables under fire conditions

102 IS 10810(Part 64):2003 Methods of test for cables :Part 64 Measurement Mar 2008 of temperature index

103 IS 10877:1984 Moulds suitable for cast resin based indoor Nov 2011 terminations for cables for voltages 3.3 kV and above and upto and including 11 kV

104 IS 11979:1987 Moulds for cast resin based straight through joints Aug 2007 for cables for working voltages from 3.3 kV upto and including 11 kV

105 IS 12909:1990 Power cables dimensions for moulds for cast resin Feb 2010 based outdoor terminations for cables for voltages above 1 100 volts and upto and including 11 000

106 IS 12943:1990 Brass glands for PVC cables Feb 2010

107 IS 13573:1992 Joints and terminations for polymeric cables for Dec 2008 2 | IEC 60502:1989 working voltages from 6.6 kV up to and including 33 kV - performance requirements and type tests

108 IS 13705:1993 Performance requirements and type test for Dec 2008 transition joint of cables for working voltages from 11 kV up to and including 33 kV

109 IS 14255:1995 Aerial bunched cables for working voltages upto Feb 2010 1 and including 1 100 volts- specification

110 IS 14494:1998 Elastomer insultated flexible cables for use in Dec 2008 mines (superseeding IS:691 and IS:1026)


1 DOC.ETD 9(5795) Specification for crosslinked polyethylene insulated thermoplastic sheathed cables: Part 2 For working voltages from 3.3 kV upto and including 33 kV (second revision)

2 DOC.ETD 9(5976) Specification for cable accessories for exturded power cable with rated voltage up to and including 3.3 kV (E) Part 1 Test requirements and test methods (first revision of IS 13573)


36

3 DOC.ETD 9(5977) Specification for cable accessories for exturded power cable with rated voltage up to and including 3.3 Kv (E) Part 2 Test requirements (First

4 DOC.ETD 9(5978) Specification for cable accessories for exturded power cable with rated voltage up to and including 3.3 kV (E) Part 3 Test methods (first revision of


1 DOC.ETD 9(5865) Halogen Free Flame Retardant Cables for Working Voltages up to and including 450/750 Volts - Specification

2 DOC.ETD 9(5882) Elastomer insultated flexible cables for use in mines (first revision of IS 14494)

3 DOC.ETD 9(5971) Specification for elastomer insulated cables with limited circuit integrity when affected by fire.

4 DOC.ETD 9(6037) Specification for recommended short circuit ratings of electric cables with rated voltage from 1.1 kV

5 DOC.ETD 9(6339) Specification for conductors for insulated electric cables and flexible cords (second revision of IS * INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS

37

ETD 10 PRIMARY CELLS AND BATTERIES SCOPE To prepare standards for cells and batteries particularly those relating to the specification, checking of their dimensions and characteristics and to provide guidance on matters of safety


STANDARDS PUBLISHED

1 IS 586:1976 Leclanche type dry batteries for Dec 2010 3 telecommunications,signalling and general purposes (third revision)

2 IS 2083:1991 Flashlights (second revision) Dec 2010 2

3 IS 2652:1976 Schedule of terminals for leclanche type primary Dec 2010 2 batteries (first revision)

4 *IS 6303:1984 General requirements and methods of tests for dry Dec 2010 6 | IEC 86-1(1972) cells and batteries 5 IS 6648:1972 Carbon electrodes for dry cells and batteries Dec 2010

6 *IS 8144:1997 Multipurpose dry batteries (first revision) Feb 2008 2 | IEC 86-2(1972) 7 *IS 9128:1999 Heavy duty dry batteries (first revision) Mar 2009 2

8 IS 11675:1986 Button cells - Silver oxide Mar 2009 | IEC 86-2(1982) 9 IS 15063:2001 Alkaline manganese dioxide cells Aug 2006 | IEC 86-2(1994) DRAFT STANDARDS FINALIZED BUT NOT YET UNDER PRINT

1 DOC.ETD 10(6275) Primary batteries – Part 4: Safety of lithium batteries [IEC 60086-4(2007)]

2 DOC.ETD 10(6276) Primary batteries – Part 5: Safety of batteries with aqueous electrolyte [IEC 60086-5(2005)]

3 DOC.ETD 10(6258) Primary Batteries Part 1: General (Second Revision of IS 6303)

4 DOC.ETD 10(6259) Primary Batteries: Part 2 Physical and electrical specification (Second Revision of IS 8144 and


38

ETD 11 SECONDARY CELLS AND BATTERIES SCOPE To prepare standards for all rechargeable cells and batteries (starter batteries, stationary batteries, traction batteries etc.)


STANDARDS PUBLISHED

1 IS 1145:1980 Lead-acid storage batteries for motor cycles, auto- Dec 2008 rickshaws and similar vehicles (second revision)

2 IS 1146:1981 Rubber and plastic containers for lead-acid storage Dec 2008 3 batteries (second revision)

3 *IS 1651:1991 Stationary cells and batteries, lead-acid type (with Sep 2007 1 tubular positive plates) (third revision) (superseding IS:541)

4 *IS 1652:1991 Stationary cells and batteries, lead-acid type with Sep 2007 2 plante positive plates (third revision) (superseding IS:541)

5 IS 2512:1978 Miners cap lamp batteries (lead-acid type) (first Dec 2008 3 revision)

6 IS 5154:1980 Lead-acid traction batteries (first revision) Dec 2008 2 | IEC 254(1967) 7 IS 6071:1986 Synthetic separators for lead-acid batteries (first Sep 2007 2 revision)

8 IS 6304:1992 Stationary batteries lead-acid type with pasted Sep 2007 1 positive plates (second revision)

9 IS 6848:1979 Lead-acid batteries for train lighting and Dec 2008 3 | IEC 77(1968) airconditioning services (first revision) 10 IS 7372:1995 Lead-acid storage batteries for motor vehicles Sep 2007 3 | IEC 95-1(1988) (first revision) 11 IS 7624:1990 Lead-acid starter batteries for diesel locomotives Dec 2008 | IEC 95-1(1980) and rail cars (first revision) 12 IS 7660:1988 Lead-acid batteries for electric locomotives and Dec 2008 electrical multiple units (first revision)

13 IS 8320:2000 General requirements and methods of test for lead- Jul 2010 acid storage batteries (second revision)

14 IS 9814:1981 Lead-acid storage batteries for marine use Dec 2008

15 IS 10893:1984 Sealed nickel-cadmium button type rechargeable Dec 2008 single cell

16 IS 10918:1984 Vented type nickel cadmium batteries Dec 2008 1 | IEC 623(1978)


39

17 IS 12013:1987 Lead-acid batteries for 110 volts train lighting Sep 2007 system with monobloc containers

18 IS 13300:1992 Nickel -cadmium aircraft batteries (aerobatic and Sep 2007 non-aerobatic)

19 IS 13315:1992 Nickel -cadmium batteries for electric locomotives Sep 2007 | IEC 623(1983) 20 IS 13369:1992 Stationary lead - acid batteries (with tubular Sep 2007 2 positive plates) in monobloc containers

21 IS 13514:1992 Lead-acid batteries for electric road vehicles Sep 2007 2

22 IS 13568:1992 Lead -acid light weight storage batteries for motor Sep 2007 1 cycles and similar vehicles fitted with ac circuitry

23 IS 13595:1992 Silver-oxide-zinc batteries for aircraft Sep 2007

24 IS 14217:1994 Miner's cap lamp batteries (alkaline type) Dec 2008

25 IS 14218:1994 Sealed cylindrical type rechargeable nickel Dec 2008 | IEC 285(1983) cadmium cells 26 IS 14257:1995 Lead-acid storage batteries for motor vehicles with Dec 2008 1 | IEC 95-1(1988) light weight and high cranking performance 27 IS 14782:2000 Code of practice for maintenance and testing of May 2010 large lead- acid batteries for generating systems and substations

28 IS 15549:2005 Stationary valve regulated lead acid batteries - Jun 2010 Specification

29 IS 15767:2008 Secondary Cells and Batteries Containing Alkaline / IEC 62259:2003 or other Non-Acid Electrolytes – Nickel-Cadmium Prismatic Secondary Single Cells with Partial Gas Recombination


1 DOC.ETD 11(6166) Stationary cells and batteries, lead-acid type (with tubular positive plates) - Specification (fourth revision of IS 1651)

2 DOC.ETD 11(6167) Stationary cells and batteries, lead-acid type with plante positive plates - Specification (fourth revision of IS 1652)

3 DOC.ETD 11(6204) Lead-acid traction batteries – Part 1: General requirements and methods of test [IEC 60254-

4 DOC.ETD 11(6205) Lead-acid traction batteries – Part 2: Dimensions of cells and terminals and marking of polarity on cells [IEC 60254-2(2008)

5 DOC.ETD 11(6206) Secondary batteries for the propulsion of electric road vehicles - Part 1: Test parameters [IEC


40

6 DOC.ETD 11(6207) Secondary batteries for the propulsion of electric road vehicles - Part 2: Dynamic discharge performance test and dynamic endurance test

7 DOC.ETD 11(6208) Secondary batteries for the propulsion of electric road vehicles Part 3: Performance and life testing (traffic compatible, urban use vehicles) [IEC


1 DOC.ETD 11(6367) Secondary cells and batteries containing alkaline or other non-acid electrolytes – Sealed nickel- cadmium prismatic Rechargeable single cells

2 DOC.ETD 11(6368) General purpose lead-acid batteries (valve- regulated types) – Part 1: general requirements, functional characteristics – Methods of test

3 DOC.ETD 11(6369) Secondary cells and batteries containing alkaline or other non-acid electrolytes – Portable sealed rechargeable single cells – Part 1: nickel-cadmium

4 DOC.ETD 11(6370) Secondary cells and batteries containing alkaline or other non-acid electrolytes – Portable sealed rechargeable single cells –Part 2: nickel-metal

5 DOC.ETD 11(6371) Secondary cells and batteries containing alkaline or other non-acid electrolytes – Secondary lithium cells and batteries for portable applications

6 DOC.ETD 11(6372) Secondary cells and batteries containing alkaline or other non-acid electrolytes – Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable

DRAFT STANDARDS APPROVED FOR WIDE CIRCULATION

1 DOC.ETD 11(6252) Lead -acid storage batteries for motor vehicles - Flooded type (Second Rrevision of IS 7372)

2 DOC.ETD 11(6253) Stationary lead acid storage batteries for motor vehicles - Valve regulated type * INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS

41

ETD 12 MEASURING EQUIPEMENT FOR BASIC ELECTRICAL QUANTITIES SCOPE To prepare standards for direct and indirect acting analogue and digital indicating and recording instruments and their accessories, also transducers having electrical inputs and outputs for measuring electrical quantities by any method on direct current and alternating current at distribution system frequencies and their harmonics To prepare standards for primary reference apparatus, operating on direct current and alternating current at distribution frequencies and their harmonics for the purpose of measurement, traceability and


1 IS 1248(Part 1):2003 Direct acting indicating analogue electrical Sep 2008 | IEC 600 51-1(1997) measuring instruments and their accessories: Part 1 General requirements (fourth revision)

2 IS 1248(Part 2):2003 Direct acting indicating analogue electrical Aug 2008 1 | IEC 600 51-2(1984) measuring instruments and their accessories: Part 2 Ammeters and voltmeters (third revision)

3 IS 1248(Part 3):2003 Direct acting indicating analogue electrical Dec 2008 1 | IEC 600 51-3(1984) measuring instruments and their accessories: Part 3 Wattmeters and varmeters (third revision)

4 IS 1248(Part 4):2003 Direct acting indicating analogue electrical Aug 2008 1 | IEC 600 51-4(1984) measuring instruments and their accessories: Part 4 Frequency meters (third revision)

5 IS 1248(Part 5):2003 Direct acting indicating analogue electrical Aug 2008 1 | IEC 600 51-5(1984) measuring instruments and their accessories: Part 5 Phase meters, power factor meters and synchroscope (third revision)

6 IS 1248(Part 6):2003 Direct acting indicating analogue electrical Aug 2008 | IEC 600 51-6(1984) measuring instruments and their accessories: Part 6 Ohmmeters (impedance meters) and conductance meters (third revision)

7 IS 1248(Part 7):2003 Direct acting indicating analogue electrical Aug 2008 1 | IEC 600 51-7(1984) measuring instruments and their accessories: Part 7 Multifunction instruments (third revision)

8 IS 1248(Part 8):2003 Direct acting indicating analogue electrical Sep 2008 1 | IEC 600 51-8(1984) measuring instruments and their accessories: Part 8 Accessories (third revision)

9 IS 1248(Part 9):2003 Direct acting indicating analogue electrical Dec 2008 | IEC 600 51-9(1988) measuring instruments and their accessories: Part 9 Test methods (third revision)

10 IS 1765:1980 Direct current potentiometers (second revision) Aug 2007 | IEC 60523:1975 11 IS 2419:1979 Dimensions for panel mounted indicating and Aug 2007 1 | IEC 60473(74) recording electrical instruments (first revision) 12 IS 2442:1963 dc moving coil galvanometers Jan 2010 1


42

13 *IS 2992:1987 Insulation resistance testers, hand operated Jan 2010 (magneto generator type) (second revision)

14 IS 3602:1966 Recommendations for the design of scales and Aug 2007 indexes for indicating instrumentsfor scales of 1 to 2 percent resolution

15 IS 3635:1966 Methods of test for resistance of metallic electrical Jan 2010 resistance material

16 IS 3636:1966 Method of test for temperature co-efficient of Jan 2010 precision resistor wires

17 IS 6236:1971 Direct recording electrical measuring instruments Jan 2010 | IEC 60258(1968) 18 IS 7889:1975 Vibration galvanometers Jan 2010

19 IS 7890:1975 Ballistic galvanometers Jan 2010

20 IS 7914:1975 Standard cells Jan 2010 3 | IEC 60428(1973) 21 IS 8143:1976 Plugs and keys for resistance boxes Jan 2010

22 IS 8160:1976 Tangent galvanometers Jan 2010 1

23 IS 8197:1976 Terminal markings for electrical measuring Jan 2010 instruments and their accessories

24 IS 8525:1977 Recommendations for design of linear scales and Aug 2007 indexes for indicating instruments to be read to 0.33-1.25 percent resolution.

25 IS 8945:1987 Electrical measuring instruments for explosive gas Jan 2010 atmospheres (first revision)

26 IS 9051:1979 Specification for Rheostats Jan 2010 1

27 *IS 9223:1989 Portable earth resistance meters (first revision) Jan 2010

28 IS 9249(Part 1):1979 Safety requirements for indicating and recording Aug 2007 | IEC 60414(1973) electrical measuring instruments and their accessories: Part 1 Common safety requirements for instruments

29 IS 9249(Part 2):1982 Safety requirements for indicating and recording Aug 2007 | IEC 60414((1973) electrical measuring instruments and their accessories: Part 2 Safety requirements for instruments using a mains supply

30 IS 10659:1983 Specification for Direct current bridges for Aug 2007 | IEC 60564(1977) measuring resistance (superseding IS:1565) 31 IS 11067:1984 Direct current standard resistors Aug 2007


43

32 IS 11212:1985 Direct current resistive volt ratio boxes Aug 2007

33 IS 11287:1985 Bridge insulation testers (Magneto generator type) Aug 2007

34 *IS 11994:1986 Portable insulation resistance tester (mains Aug 2007

35 IS 12312:1987 Inductive voltage dividers Jan 2010 | IEC 60618 36 *IS 14570:1998 Electrical measuring transducers for converting Aug 2007 / IEC 60688:1992 AC electrical quantities to to analogue or digital 37 IS 14571:1998 Electrical measuring Instruments X-Y recorders. Jul 2008 / IEC 61028(1991) FINALISED DRAFTS UNDER PRINT

1 DOC.ETD 12(6141) Panel mounted equipment - electrical measuring instrument - dimensions for panel mounting IEC

2 DOC.ETD 12(6168) Elctrical measuring transducers for converting a.c. electrical quantities or analogue or digital signals IEC 60688 (Superseding IS 14570)

3 DOC.ETD 12(6169) Electrical safety in low voltage distribution system up to 1000 V a.c. and 1500 V d.c. equipment for testing, measuring or monitorin or protective measurs - Part 1: Gnral requirments IEC 61557-1

4 DOC.ETD 12(6170) Electrical safety in low voltage distribance systems UP to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring or protective measures Part 2 Insulation resistance IEC 61557-2(Superseding IS 11994)

5 DOC.ETD 12(6190) Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment dor testing, measuring or monitoring or protective measures - Part 5: Resistance to earth IEC 61557-5 (Superseding IS 9223)


44

ETD 13 EQUIPMENT FOR ELECTRICAL ENERGY MEASUREMENT TARIFF AND LOAD CONTROL SCOPE To prepare international standards for equipment for electrical energy measurement, tariff - and load control, customer information, payment, local and/or remote data exchange, using electromechanical and/or electronic, technologies for applications ranging from electrical energy generation to residential. The standards may include requirements and test methods to cover mechanical, environmental, electrical, safety, metrology dependability aspects as well as


1 IS 1766:1998 Time swtiches for metering and load control Oct 2008 | IEC 61038:1992 (second revision) 2 IS 7700:1975 Quadrature phase-shifting voltage transformers Sep 2010

3 IS 8530:1977 Maximum demand indicators (class 1) Sep 2010 | IEC 60211:1966 4 IS 9792(Part 1):2005 Guide for testing, calibration and maintenance of Jan 2010 ac electricity meters: Part 1Single phase whole current watthour meters, Class 2 (first revision)

5 IS 11426(Part 1):2006 Alternating current precision electricity meters for Apr 2011 testing purposes: Part 1 Requirements for electromechanical meters (first revision) 6 IS 11448:2000 Application guide for ac electricity meters(first revision) Jul 2010

7 IS 12346:1999 Testing equipment for ac electrical energy meters Jul 2009 | IEC 60736:1982 (first revision) 8 **IS 13010:2002 AC watt-hour meters, Class 0.5, 1 and 2(first revision) Sep 2007 2 | IEC 60521:1988 9 **IS 13779:1999 AC static watthour meters (Class 1 and 2) Oct 2009 4 | IEC 61036:1996 (first revision) 10 IS 14372:1996 Volt-ampere hour meters for full power factor range Sep 2009 [superseding IS:722(Part 7/Sections 1, 2 and 3)-

11 IS 14415:1997 Volt-Amphere hour meters for restricted power Dec 2007 | IEC 60211:1996 factor range - specification [superseding IS:722 12 IS 14451(Part 1):1998 Telemetering of consumption and demand: Jan 2008 | IEC 60338:1970 Part 1 Impulse transmitting and receiving devices 13 IS 14451(Part 2):1999 Telemetering for Consumption and Demands Part 2 Jul 2009 | IEC 60338:1970 Direct digital transfer of meter values 14 **IS 14697:1999 ac static transformer operated watthour and var- Oct 2009 3 | IEC 60687:1992 hour meters, class 0.2S and .5S-Specification 15 IS 15707:2006 Testing, evaluation, installation and maintenance of ac electricity meters - Code of Practice


45

16 IS 15884:2010 Alternating current direct connected static pre- payment meters for active energy (Class 1 & 2) -

17 IS 15959:2011 Electricity Metering - Data Exchange for meter reading, tariff and load control - Companion


1 DOC.ETD 13(5997) Electricity Metering Data exchange for meter reading, tariff and load control- Part 21 direct local data exchange (IEC 62056-21:2002)

2 DOC.ETD 13(5998) Electricity metering Data exchange for meter reading tariff and load control -Part 42 Physical layer services and procedures for connection- oriented asynchronous data exchange. (IEC 62056-

3 DOC.ETD 13(6165) Electricity Metering - Data Exchange for meter reading, tariff and load control Part 47 COSEM transport layers for IPv4 networks

4 DOC.ETD 13(6229) Electricity Metering - Data exchange for meter reading tariff and load control Part 1 Terms relate to data exchange with metering equipment using DLMS/COSEMV (IEC 62051-1:2004)

5 DOC.ETD 13(6235) Electricity metering Data exchange for meter reading tariff and load control -Part 46 Data link layer using HDLC protocol (IEC 62056-46:2007)

6 DOC.ETD 13(6236) Electricity metering Data exchange for meter reading tariff and load control -Part 53 COSEM application layer'(IEC 62056-53:2006)

7 DOC.ETD 13(6237) Electricity metering Data exchange for meter reading tariff and load control -Part 61 Object identification system (OBIS)" (IEC 62056-61:2006)

8 DOC.ETD 13(6238) Electricity metering Data exchange for meter reading tariff and load control -Part 62 Interface Classes' (IEC 62056-62:2006)


1 DOC.ETD 13(6042) Electricity Metering Equipment (AC)- particular requirements - static meter for active energy classes (1&2) ( Second Revision of IS 13779)

2 DOC.ETD 13(6043) Electricity Mrtering Equipment (AC)- Particular Requirements - electromechanical Meters active Energy, Classes 0.5, 1 and 2 ( Second Revision of IS 13010)

3 DOC.ETD 13(6044) Electricity Metering Equipment (AC)- Particular Requirements :static Transformer operated Multi- Energy (classes 0.2S, 0.55 and 1.0S) ( First Revision of IS 14697)

4 DOC.ETD 13(6113) Electricity metering equipment ac - general requirements, tests and tests conditions * INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS

46

ETD 14 ELECTRICAL WIRING ACCESSORIES SCOPE To prepare standards for electrical wiring accessories ; such as lamp

holders, switches, plugs and socket- outlets, connecting devices and conduits and their accessories for electrical installations


STANDARDS PUBLISHED

1 IS 371:1999 Ceiling roses (third revision) Mar 2010 4

2 IS 1258:2005 Bayonet lamp holders (fourth revision) Jun 2010 3 | IEC 61184(1997) 3 IS 1293:2005 Plugs and socket outlets of rated voltage upto and Jun 2010 5 | IEC 60884-1 (2002) including 250 volts and rated current upto and including 16 amperes - Specification (third revision)

4 IS 2412:1975 Link clips for electrical wiring (first revision) May 2007 2

5 IS 3010(Part 1):1965 Appliance-connectors and appliance-inlets (non- Apr 2009 6 reversible three-pin type): Part 1 Appliance connectors

6 IS 3010(Part 2):1965 Appliance-connectors and appliance-inlets(non- Apr 2009 5 reversible three-pin type): Part 2 Appliance inlets

7 IS 3323:1980 Bi-pin lampholders for tubular fluorescent lamps Oct 2007 1 | IEC 60400(1972) (first revision) 8 IS 3324:1982 Holders for starters for tubular fluorescent lamps Jun 2008 | IEC 400(1972) 9 IS 3419:1989 Fittings for rigid non-metallic conduits (second revision) May 2007

10 **IS 3480:1966 Flexible steel conduits for electrical wiring May 2007 1

11 IS 3837:1976 Accessories for rigid steel conduits for electrical May 2007 1 wiring (first revision)

12 *IS 3854:1997 Switches for domestic and similar purposes Jul 2007 6 | IEC 60669-1(1998) (second revision) 13 IS 4160:2005 Interlocking switch socket outlets - Specification Jun 2010 | IEC 60884-2-6 (1997) (first revision) 14 IS 4649:1968 Adaptors for flexible steel conduits May 2007

15 IS 6896:1973 Connectors (two-way) for railway coach wiring May 2007 1

16 IS 6965:1979 Switches for use in railway coaching stock (first May 2007 2 revision)


47

17 IS 8200:1976 Toggle switches used in traction application Jun 2008

18 *IS 9537(Part 1):1980 Conduits for electrical installations: Part 1 General Nov 2010 1 | IEC 60614-1(1978) requirements 19 **IS 9537(Part 2):1981 Conduits for electrical installations:Part 2 Rigid May 2007 3 steel conduits (superseding IS:1653)

20 **IS 9537(Part 3):1983 Conduits for electrical installations: Part 3 Rigid May 2007 1 | IEC 60614-2-2(1980) plain conduits of insulating materials (superseding 21 **IS 9537(Part 4):1983 Conduits for electrical installations: Part 4 Pliable May 2007 self-recovering conduits of insulating materials

22 *IS 9537(Part 5):2000 Conduits for a electrical installations: Part 5 Jun 2010 | IEC 60614-2-3(1990) Pliable conduits of insulating material (Superseding IS

23 IS 9537(Part 6):2000 Conduit for electrical installations: Part 6 Pliable Mar 2010 | IEC 60614-2-6(1992) conduits of metal or composit materials 24 IS 9537(Part 8):2003 Conduits for electrical instalations Part 8 Rigid non Apr 2008 threadable conduits of aluminium alloy

25 IS 10276(Part 1):1982 Edison screw lampholders : Jun 2008 | IEC 60238(1975) Part 1 Requirements and tests 26 IS 10276(Part 2):1982 Edison screw lampholders : Jun 2008 | IEC 60238(1975) Part 2 Standard data sheets for lamp holders and gauges

27 IS 11037:1984 Electronic type fan regulators Aug 2010 3

28 IS 14763:2000 Conduit for electrical purposes, outside diameters Mar 2010 | IEC 60423(1993) of conduits for electrical installations and threads for conduits and fittings

29 IS 14768(Part 1):2000 Conduit fittings for electrical installations :Part 1 Nov 2007 | IEC 61035-1(1990) General requirements 30 IS 14768(Part 2):2003 Conduit fittings for electrical installations : Part 2 Feb 2008 | IEC 61035-2-1(1993) Metal conduit fittings (superseding IS 2667) 31 IS 14772:2000 Enclosures for accessories for household and May 2007 | IEC 60670-1(1989) similar fixed electrical installations (Superseding IS 5133(Part 1 and 2)

32 IS 14927(Part 1):2001 Cable trunking and ducting systems for electrical Aug 2007 1 | IEC 61084-1(1991) installations :Part 1 General requirements 33 IS 14927(Part 2):2001 Cable trunking and ducting systems for electrical May 2007 | IEC 61084-2-1(1996) installations: Part 2 Cable trunking and ducting systems instended for mounting on walls or

34 IS 14930(Part 1):2001 Conduit systems for electrical installations : May 2007 3 | IEC 61386-1(1996) Part 1 General requirements 35 IS 14930(Part 2):2001 Conduit systems for electrical installations : May 2007 2 | IEC 61386-2(1995) Part 2 Particular requirements for conduit system buried underground

36 IS 15368:2003 Cable reels for household and similar purposes Jul 2008


48

37 IS 15787:2008 Switch- socket outlets (Non-Interlock Type) | IEC 60884-2-3 (1989) 38 IS 60309(Part 1):2002 Plugs, socket-outlets and couplers for industrial Oct 2007 / IEC 60309-1(1999) purposes: Part 1 General requirements (first 39 IS 60309(Part 2):2002 Plugs, socket-outlets and couplers for industrial Oct 2007 / IEC 60309-2(1999) purposes: Part 2 Dimensional interchangeability requirements for pin and contact-tube accessories

40 IS 60320(Part 1):2001 Appliance couplers for household and similar Nov 2007 / IEC 60320-1(2001) general purposes Part 1 General requirements 41 IS 60320(Part 2/Sec 2):1998 Appliance couplers for household and similar Nov 2007 / IEC 60320-2-2(1998) general purposes part 2-2 Interconnection couplers for household and similar equipment

42 IS 60320(Part 2/Sec 3):2007 Appliance couplers for household and similar Nov 2007 | IEC 60320-2-3(1998) general purposes- part 2-3 Appliance coupler with a degree of protection higher IPXO

43 IS 61058(Part 1):2001 Switches for Appliances: Part 1 General Sep 2007 / IS/IEC 61058-1(2000) Requirement (IEC 61058-1) DRAFT STANDARDS ISSUED IN WIDE CIRCULATION

1 DOC.ETD 14(6277) Conduit Systems For Cable Management - Part 1 : / IEC 61386-1 General Requirements 2 DOC.ETD 14(6278) Conduit Systems For Cable Management - Part 21 / IEC 61386-21 : Rigid Conduit Systems 3 DOC.ETD 14(6279) Conduit Systems For Cable Management - Part 22 / IEC 61386-22 : Pliable Conduit Systems 4 DOC.ETD 14(6280) Conduit Systems For Cable Management - Part 23 / IEC 61386-23 : Flexible Conduit Systems


49

ETD 15 ROTATING MACHINERY SCOPE To prepare standards on rotating electrical machines like induction, synchronous, motors, generators, dc machines and turbines including carbon brushes for electrical machines (with the exception of traction machines and rotating machinery coming under the purview of other Committees)


1 IS 325:1996 Three-phase induction motors(first revision) Jan 2007 3 | IEC 60034-1(1983) 2 IS 900:1992 Code of practice for installation and maintenance Feb 2008 of induction motors (Second revision)

3 IS 996:2009 Specification for single phase ac induction motors 1 for general purpose (third revision)

4 IS 1231:1974 Dimensions of three-phase foot-mounted induction Feb 2008 4 | IEC 60072 (1971) motors (third revision) 5 IS 2223:1983 Dimensions of flange mounted ac induction motors Jan 2007 2 | IEC 60072 (1971) (first revision) 6 IS 2253:1974 Designation for types of construction and Jan 2007 | IEC 34-7(1972) mounting arrangement of rotating electrical machines (first revision)

7 IS 2254:1985 Dimensions of vertical shaft motors for pumps Jan 2007 (second revision)

8 IS 2968:1964 Dimensions of slide rails for electric motors Jan 2007 1

9 IS 2972(Part 1):1979 Textile motors: Part 1 Loom motors (first revision) Jan 2007 2

10 IS 2972(Part 2):1979 Textile motors: Part 2 Card motors (first revision) Jan 2007 1

11 IS 2972(Part 3):1979 Textile motors: Part 3 Spinning frame motors (first Jan 2007 revision)

12 IS 4029:2010 Guide for testing three-phase induction motors (first revision)

13 IS 4665(Part 1):1984 Portable electric motor-operated tools: Part 1 Jan 2007 1 General requirements and tests (first revision)

14 IS 4665(Part 2):1984 Portable electric motor-operated tools:Part 2 Jan 2007 Specific requirements for tools

15 IS 4758:1968 Method of measurement of noise emitted by Jan 2007

16 IS 4889:1968 Method of determination of efficiency of rotating Jan 2007 3 | IEC 2 D electrical machines 17 IS 5422:1996 Turbine type generators (first revision) Jan 2007 | IEC 60034-3(1988) * INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS

50

18 IS 6362:1995 Designation of methods of cooling of rotating Jan 2007 / IEC 60034-6:1991 electrical machines 19 IS 7132:1973 Guide for testing synchronous machines Jan 2007 | IEC 60034-1(1969) 20 IS 7306:1974 Methods for determining synchronous machine Jan 2007 | IEC 60034-4(1967) quantities from tests 21 IS 7538:1996 Three-phase squirrel cage induction motors for Jan 2007 2 centrifugal pumps for agricultural applications (first revision)

22 IS 7572:1974 Guide for testing single-phase ac and universal Jan 2007

23 IS 7816:1975 Guide for testing insulation resistance of rotating Jan 2007 2 machines

24 IS 8151:1976 Single-speed three-phase induction motors for Jan 2007 2 driving lifts

25 IS 8223:1999 Dimensions and output series for rotating electrical Apr 2009 | IEC 60072-2(1990) machines (first revision) 26 IS 8789:1996 Values of performance characteristics for three- Jan 2007 1 phase induction motors (first revision)

27 *IS 9283:1995 Motors for submersible pump sets (first revision) Jan 2007 3

28 IS 9320:1979 Guide for testing of direct current (dc) machines Jan 2007 1

29 IS 9582(Part 1):1980 Single-phase electric motors for definite purposes: Mar 2009 1 Part 1 Domestic laundry machine motors

30 IS 9628:1980 Three-phase induction motors with type of Mar 2009

31 IS 9670:1980 Direct current micro motors for cassette tape Mar 2009 recorders and other applications

32 IS 9919:1999 Guide for selection and use of carbon brushes for Feb 2008 applications in rotating electrical machines

33 IS 10534:1983 Method of measurement of airborne noise emitted Jan 2007 by gas turbine installations

34 IS 11537:1985 Centrifugal switch for single phase induction Jan 2007

35 IS 12065:1987 Permissible limits of noise level for rotating Mar 2009 1 | IEC 60034-9 electrical machines 36 IS 12066:1987 Three-phase induction motors for machine tools Mar 2009

37 IS 12075:2008 Mechanical vibration of rotating electrical machines with shaft heights 56 mm and higher- measurement, evaluation and limits of vibration


51

38 IS 12615:2011 Energy Efficient Three Phase Squirrel Cage Induction Motors (Second Revision)

39 IS 12642:1989 Brush-holders for slip rings group R-Type RA Mar 2009 | IEC 60778 40 IS 12998(Part 1):1991 Method f measurement of airborne noise emitted Feb 2008 / ISO 1680-1:1986 by rotating machinery: Part 1 Engineering method for free field conditions over a reflecting plane

41 IS 12998(Part 2):1991 Method of measurement of airborne noise emitted Feb 2008 / ISO 1680-2:1986 by rotating machinery: Part 2 Survey method 42 IS 13079:1991 Stepping Motors Jan 2007

43 IS 13107:1991 Guide for measurement of winding resistance of an Feb 2008 / IEC 60279(1969) ac machine during operation at alternating voltage 44 IS 13364(Part 1):1992 Specification for ac generators driven by Feb 2008 | IEC 60034-1 reciprocating internal combustion engine: Part 1 45 IS 13364(Part 2):1992 Specification for ac generators driven by Feb 2008 | IEC 60341(1983) reciprocating internal combustion engine: Part 2 Rated above 20 kVA and upto 1250 kVA

46 IS 13466:1992 Specification for brushes for electrical machines Feb 2008 | IEC 60136, 467, 773 [superseding IS:3003 (Parts 3 and 4)-1977] 47 IS 13525:1992 Flexible conductors for carbon brushes Feb 2008

48 IS 13529:1992 Guide on effects of unbalanced voltages on the Feb 2008 | IEC 600892(1987) performance of three-phase cage induction motors 49 IS 13555:1993 Guide for selection and application of three-phase Mar 2009 ac induction motors for different types of driven

50 IS 13584:1993 Specification for brush materials for electrical Mar 2009 | IEC 413(1972) machinery [Superseding IS 3003(Part 2):1977] 51 IS 13586:1993 Definitions and nomenclature for carbon brushes, Mar 2009 | IEC 276(1968) brush holders, commutators and slip rings for rotating electrical machinery (superseding IS:3003(Part 1)-1977)

52 IS 13937(Part 1):1994 Statistical method of determining and verifying Jan 2007 / ISO 7574-1:1985 standard noise emission values of machinery and equipment: Part 1 General conditions and

53 IS 13937(Part 2):1994 Statistical method of determining and verifying Jan 2007 / ISO 7574-2:1985 standard noise emission values of machinery and equipment: Part 2 Methods of stated values for individual machines

54 IS 13937(Part 3):1994 Statistical method of determining and verifying Jan 2007 / ISO 7574-3:1985 standard noise emission values of machinery and equipment: Part 3 Simple (transition) method for stated values for batches of machines

55 IS 13937(Part 4):1994 Statistical method of determining and verifying Jan 2007 / ISO 7574-1985 standard noise emission values of machinery and equipment: Part 4 Methods for stated values for batches of machines


52

56 IS 14195:1994 Brush-holders for electrical machines guide to the Jan 2007 / IEC 61015(1990) measurement of the static thrust applied to brush 57 IS 14196:1994 Definitions and terminology of brush-holders for Jan 2007 / IEC 60560(1977) electrical machines 58 IS 14197:1994 Code for model acceptance tests of hydraulic Jan 2007 1 / IEC 60193:1965 59 IS 14198(Part 1):1994 Rules for steam turbines thermal acceptance tests Jan 2007 / IEC 60953-1:1990 - Method A 60 IS 14198(Part 2):1994 Rules for steam turbines thermal acceptance Jan 2007 / IEC 60953-2:1990 tests - Method B 61 IS 14205(Part 1):1994 Steam turbines Part 1 Specification Jan 2007 / IEC 60045-1:1991 62 IS 14222:1995 Impulse withstand levels of rotating ac machines Jan 2007 / IEC 60034-15:1990 with form wound stator coils 63 IS 14376:1996 Brush holders for electrical machines Jan 2007 | IEC 136(1986) 64 IS 14377:1996 Induction motors for fan used in air-conditioning Jan 2007 and ventilation

65 IS 14568(Part 2):1998 Dimensions and output series for rotating electrical Jul 2008 / IEC 60072-2(1990) machines Part 2 Frame numbers 355 to 1000 and flange numbers 1180 to 2360

66 IS 14569:1999 Commutators for electrical machines Feb 2009

67 IS 14578:1999 Three-phase induction motors for use in nuclear Mar 2009 1 power plants

68 IS 14582:1998 Single-phase small a.c. electric motors for Mar 2008 1 centrifugal pumps for agricultural applications

69 IS 14889:2000 Copper tamping powder for carbon brushes Dec 2010

70 IS 15429:2004 Storage, installation and maintenance of DC Jun 2009 motors -

71 IS 15664:2006 Gas turbines - Acceptance tests Apr 2011 / ISO 2314(1989) 72 IS 15665:2006 Gas turbines - Vocabulary Apr 2011 / ISO 11086(1996) 73 IS 15666(Part 1):2006 Gas turbines - Procurement - Part 1: General Apr 2011 / ISO 3977-1(1997) introduction and definitions 74 IS 15666(Part 2):2006 Gas turbines - Procurement - Part 2: Standard Apr 2011 / ISO 3977-2(1997) reference conditions and ratings 75 IS 15666(Part 3):2006 Gas turbines - Procurement - Part 3: Design Apr 2011 / ISO 3977-3(2004) requirements 76 IS 15666(Part 4):2006 Gas turbines - Procurement - Part 4: Fuels and Apr 2011 / ISO 3977-4(2002) environment


53

77 IS 15666(Part 5):2006 Gas turbines - Procurement - Part 5: Applications Apr 2011 / ISO 3977-5(2001) for petroleum and natural gas industries 78 IS 15666(Part 7):2006 Gas turbines - Procurement - Part 7: Technical Apr 2011 / ISO 3977-5(2002) information 79 IS 15666(Part 8):2006 Gas turbines - Procurement - Part 8: Inspection, Apr 2011 / ISO 3977-8(2002) testing, installation and commissioning 80 IS 15666(Part 9):2006 Gas turbines - Procurement - Part 9: Reliability, Apr 2011 / ISO 3977-9(1999) availability, maintainability and safety 81 IS 15667:2006 Gas turbines - Data acquisition and trend Apr 2011 / ISO 19860(2005) monitoring system requirements for gas turbine 82 IS 15880:2009 Three phase cage induction motors when fed from IGBT converters - Application Guide

83 IS 15881:2009 Three phase cage induction motors specifically designed for IGBT converter supply

84 IS 15999(Part 2/Sec 1):2011 Rotating Electrical Machines Part 2 Method of Tests Section 1 Standard Methods for Determining Losses and Efficiency from Tests (Excluding Machines for Traction Vehicles)

85 IS 60034(Part 1):2004 Rotating electrical machines - Part 1 Rating and / IS/IEC 60034-1(2004) performance 86 IS 60034(Part 5):2000 Rotating electrical machines - Part 5: Degrees of / IS/IEC 60034-5(2000) protection provided by the integral design of rotating electrical machines (IP code) - Classification (Superseding IS 4691)

87 IS 60034(Part 8):2002 Rotating electrical machines - Part 8: Terminal / IS/IEC 60034-8(2002) markings and direction of rotation (Superseding IS 4728)

88 IS 60041:2000 Field acceptance tests to determine the hydraulic Jun 2010 / IS/IEC 60041(2000) performance of turbines, storage pumps and pump turbines


1 DOC.ETD 15(5941) Motors for Submersible Pumpsets - Specification (second revision of IS 9283)


1 DOC.ETD 15(6294) Electric Traction Lifts Part 10 Poly Phase Electric Motors for Driving Electric Traction Lifts


54

ETD 16 TRANSFORMERS SCOPE To prepare standards on power and distribution transformers, reactors, on-load tap changers, etc, without limitation on voltage or power. Transformer accessories and voltage stablizers, testing transformers and furnace transformers are included. (Instrument transformers, welding transformers and traction transformers are excluded)

Sl. No. IS Number/ DOC Number Title Reaffirm No. of Date Amd. STANDARDS PUBLISHED 1 *IS 1180(Part 1):1989 Outdoor type three-phase distribution transformers Jul 2008 1 upto and including 100 kVA 11 kV:Part 1 Non- sealed type (third revision)

2 *IS 1180(Part 2):1989 Outdoor type three-phase distribution transformers Jul 2008 upto and including 100 kVA 11 kV:Part 2 Sealed type (first revision)

3 IS 2016(Part 2):2010 Power Transformers - Part 2 Temperature rise (first revision)

4 *IS 2026(Part 1):1977 Power transformers: Part 1 General (first revision) Jul 2011 3 | IEC 60076(1977) 5 IS 2026(Part 3):2009 Power Transformers - Part 3 Insulaiton levels, / IEC 60076-3 (2000) dielectric tests and external clearances in air (third revision)

6 IS 2026(Part 4):1977 Power transformers: Part 4 Terminal Jul 2011 2 | IEC 60076(1977) marking,tappings and connections (first revision) 7 *IS 2026(Part 5):1994 Power Transformer: Part 5 Transformer/Reactor Jul 2011 | IEC 60076-3-1(1987) bushings minimum external clearance in air - Specification

8 IS 2026(Part 7):2009 Power Transformers - Part 7 Loading guide for oil / IEC 60076-7(2005) immersed power transformers 9 IS 2026(Part 10):2009 Power Transformers - Part 10 Determination of sound levels

10 IS 2026(Part 8):2009 Power Transformers - Part 8 Application guide

11 IS 2772:1982 Non-flameproof mining transformers for use below Jul 2011 ground (first revision)

12 IS 3151:1982 Earthing transformers (first revision) Jul 2011 | IEC 60289(1968) 13 IS 3639:1966 Fittings and accessories for power transformers Jul 2011

14 IS 5142:1969 Continuously variable voltage auto transformers Jul 2011 2

15 IS 5553(Part 1):1989 Reactors: Part 1 General Jul 2008 | IEC 60289(1988)


55

16 IS 5553(Part 2):1990 Reactors: Part 2 Shunt reactors Jul 2008 | IEC 60 289(1988) 17 IS 5553(Part 3):1990 Reactors: Part 3 Current limiting reactors and Jul 2008 | IEC 60289(1988) neutral earthing reactors 18 IS 5553(Part 4):1990 Reactors: Part 4 Damping reactors Nov 2009 | IEC 60289(1988) 19 IS 5553(Part 5):1989 Reactors: Part 5 Tuning reactors Nov 2009 | IEC 60289(1988) 20 IS 5553(Part 6):1991 Reactors: Part 6 Earthing transformers (Neutral Jul 2011 | IEC 60289(1988) couplers) 21 IS 5553(Part 7):1990 Reactors: Part 7 Arc supression reactors Nov 2009 | IEC 60289(1988) 22 IS 5553(Part 8):1990 Reactors: Part 8 Smoothing reactors Nov 2009 | IEC 60289(1988) 23 IS 6600:1972 Guide for loading of oil immersed transformers Jul 2011

24 IS 8447:1989 Manually operated voltage regulators for domestic Jul 2008 1 use (first revision)

25 IS 8448:1989 Automatic line voltage correctors (step type for Jul 2008 2 domestic use) (first revision)

26 IS 8468:1977 On-load tap changers Jul 2011 1

27 IS 8478:1977 Application guide for on-load tap changers Jul 2011

28 IS 9147:1979 Cable sealing boxes for oil immersed transformers Jul 2011 suitable for paper insulated lead sheathed cables for highest system voltages from 12 kV upto and including 36 kV

29 IS 9815(Part 1):1994 Servo-motor operated automatic line voltage Nov correctors: Part 1 Correctors for single phase applications (second revision)

30 IS 10028(Part 1):1985 Code of practice for selection, installation and Jul 2011 maintenance of transformers: Part 1 Selection

31 IS 10028(Part 2):1981 Code of practice for selection, installation and Jul 2011 maintenance of transformers; Part 2 Installation (superseding IS:1886)

32 IS 10028(Part 3):1981 Code of practice for selection, installation and Jul 2008 1 maintenance of transformers: Part 3 Maintenance (superseding IS:1886)

33 IS 10161:1982 Moving coil voltage regulators Jul 2011

34 IS 10561:1983 Application guide for power transformers Jul 2011 | IEC 606 (1978) 35 IS 11171:1985 Dry type power transformers Jul 2011 | IEC 60726(1982) * INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS

56

36 IS 11333:1985 Flameproof dry type transformers for use in mines Jul 2011

37 IS 12977:1990 Arc furnance transformers Nov 2009

38 IS 13956:1994 Testing transformers Nov 2009

39 IS 13964:1994 Methods of measurement of transformer and Nov 2009 | IEC 551 (1976) reactor sound levels

40 IS 61558(Part 1):1997 Safety of power Transformer,power supply units July 2008 / IS/IEC 61558-1(1997) and similar: Part 1 General requirement and test 41 IS 61558(Part 2/Sec 6):1997 Safety of power Transformers, power supply units April 2008 / IS/IEC 61558-2-6(97) and similar: Part 2 particular requirements, Section 6 Safety Isolating transformers for general use

42 IS 61558(Part 2/Sec 7):2007 Safety of power Transformers, power supply units / IS/IEC 61558-2-7(07) and similar part 2-7: Particulars requirements for transformers for toys


1 DOC.ETD 16(6058) Power Transformers - Part 1 General (first revision of IS 2026(Part 1)

2 DOC.ETD 16(6061) Power Transformers - Part 5 Ability to withstand short circuit (first revision of IS 2026(Part 5)


1 DOC.ETD 16(6117) Outdoor type three-phase distribution transformers up to and including 100 KVA, 33 KV Part 1 Non- seald type [Fourth Revision of IS 1180(Part 1)]

2 DOC.ETD 16(6118) Outdoor type three-phase distribution transformers up to and including 200 KVA, 33 KV Part 2: Seald type [Second Revision of IS 1180(Part 2 )]


57

ETD 18 INDUSTRIAL PROCESS MEASUREMENT AND CONTROL SCOPE To prepare standards for systems and elements used for industrial process measurement and control concerning continuous and batch To coordinate the standardization of those features of related elements which affect suitability for integration into such systems operating with electrical, pneumatic, hydraulics mechanical or other systems of measurements and/or control


1 IS 2053:1974 Thermocouple pyrometers (first revision) Sep 2008

2 *IS 2054:1962 Reference tables for nickel/chromium- Sep 2010 2 nickel/aluminium thermocouples

3 *IS 2055:1962 Reference tables for platinum/rhodium-platinum Sep 2010 2 thermocouples

4 *IS 2056:1962 Reference tables for copper-constant Sep 2010 2

5 *IS 2057:1962 Reference tables for iron-constant thermocouples Sep 2010 2

6 IS 2711:1979 Direct reading pH meters (second revision) Sep 2008 1

7 IS 2806:1992 Guide to electrical resistance thermometry (first Apr 2008 revision)

8 IS 2848:1986 Industrial platinum resistance thermometer sensors May 2006 (first revision)

9 IS 3624:1987 Pressure and vacuum gauges (second revision) Apr 2008

10 IS 3944:1982 Methods for determination of flowtime by use of Sep 2010 flow cups (first revision)

11 IS 4309:1979 Method of measurement on direct reading pH Sep 2008 meters (first revision)

12 IS 5883:1970 Nickel resistance thermometer elements Sep 2008

13 *IS 6720:1972 Reference tables for plantinum/30 percent Sep 2008 rhodium-platinum/6 percent rhodium thermocouples

14 IS 6804:1972 Glass electrodes for direct reading pH meters Sep 2008

15 IS 7358:1984 Thermocouples (first revision) Sep 2010

16 IS 7722:1975 Analogue pneumatic signals for process control Sep 2008 systems


58

17 IS 7728:1984 Analogue dc current signals for process control Sep 2010 systems (first revision)

18 *IS 7988:1976 Reference tables for chromel-kopel thermocouples Sep 2008

19 IS 8018:1976 Platinum and platinum alloy wires for thermocouple Sep 2008 elements

20 IS 8457:1977 Tyre pressure gauges for automobiles (Pocket Sep 2008

21 IS 8493:1977 Analogue dc voltage signals for industrial process Sep 2010 measurements and control systems

22 IS 8495(Part 1):1977 Ceramic components for thermocouples and Sep 2008 resistance thermometers: Part 1 Terminal blocks

23 IS 8784:1987 Thermocouple compensating cable (second Apr 2008

24 IS 8824(Part 1):1978 Electrical moisture meters: Part 1 For foodgrains Sep 2008 1

25 IS 8824(Part 2):1988 Electrical moisture meters: Part 2 For jute Sep 2010 (conductivity type)

26 IS 8935:1985 Electric solenoid operated actuators (first revision) Sep 2010

27 IS 8992:1978 Test methods for induction furnaces Mar 2011 | IEC 60396(1972) with submerged channels 28 IS 9021:1978 General test conditions for industrial Mar 2011 | IEC 60398(1972) electro-heating equipment 29 IS 9029:1978 Methods of tests for batch furnaces with Mar 2011 1 | IEC 60397(1972) metallic heating resistors 30 **IS 9050:1979 Nominal dimensions of cylindrical machines Mar 2011 | IEC 60239(1967) graphite electrodes with threaded sockets and connecting pins for use in electric arc furnaces.

31 IS 9080(Part 1):1979 Safety requirements in electro-heat installations: Mar 2011 Part 1 General requirements

32 **IS 9080(Part 2/Sec 1):1979 Safety requirements in electro-heat installations: Mar 2011 | IEC 60519-2(1975) Part 2 Particular requirements for resistance heating equipment, Section 1 Protection in direct resistance heating installations

33 **IS 9080(Part 2/Sec 2):1980 Safety requirements in electro-heat Mar 2011 installations: Part 2 Particular requirements for resistance heating equipment , Section 2 Protection in indirect

34 **IS 9080(Part 2/Sec 3):1981 Safety requirements in electro-heat installations: Mar 2011 | IEC 60519-2(1975) Part 2 Particular requirements for resistance heating equipment, Section 3 Protection in potassium and sodium nitrate and nitrite bath furnaces


59

35 **IS 9080(Part 2/Sec 4):1981 Safety requirements in electro-heat Mar 2011 | IEC 60519-2(1975) installations: Part 2 Particular requirements for resistance heating equipment, Section 4 Protection in installations used for

36 **IS 9080(Part 4):1981 Safety requirements in electro-heat installations: Mar 2011 | IEC 60519-4(1977) Part 4 Particular requirements for arc furnace installations.

37 IS 9319:1979 Electronic self-balancing potentiometric indicators Sep 2008 and recorders

38 IS 9334:1986 Electric motor operated actuators (first revision) May 2006

39 IS 9347:1979 Charts for recording instruments May 2006

40 IS 9463:1980 Electronic self-balancing bridge indicators and Sep 2008 recorders

41 IS 10098:1982 General requirements for electric Mar 2011 | IEC 60240(1967) infra-red emitters for heating purposes. 42 **IS 10122:1982 Methods of tests for crucible induction furnaces Mar 2011 | IEC 60545(1979) 43 IS 10144:1982 Electronic speed limiters for diesel vehicles Sep 2008 1

44 *IS 10189(Part 1):1982 Industrial process control valves: Part 1 General Sep 2008 requirements and tests

45 *IS 10189(Part 2/Sec 1):1993 Industrial process control valves: Part 2 Flow Sep 2008 | IEC 60534-2-1(1978) capacity, Section 1 Sizing equations for incompressible fluid flow under installed conditions

46 **IS 10189(Part 2/Sec 2):1993 Industrial process control valves: Part 2 Flow Sep 2008 | IEC60534-2-2(1980) capacity SectIon 2 Sizing equations for compressible fluid flow under installed conditions

47 IS 10189(Part 2/Sec 1):2000 Industrial process control valves Part2/Sec 1 Flow Sep 2008 / IEC 60534-2-1:1998 Capacity-sizing Equations for fluid flow under Installed conditions (superseding of IS 10189(Part

48 **IS 10215:1982 Methods of tests for submerged arc furnaces Mar 2011 | IEC 60683(1980) 49 IS 10398:1982 Zener barrier for intrinsically safe process control May 2006 instruments

50 *IS 10625:1983 Reference tables for nickel/chromium- Sep 2010 copper/nickel (chromel-constantan) thermocouples

51 IS 10639:1983 Disappearing filament type optical pyrometers May 2006

52 IS 11222:1985 Dials, scales and indexes for indicating analogue Sep 2010 measuring instruments

53 IS 11692:1986 Method of tests for electro-slag remelting furnaces Feb 2008 | IEC 27(CO)60


60

54 IS 11712:1986 Safety requirements for Feb 2008 | IEC 27(CO)1959 electro-slag remelting furnaces. 55 **IS 12051:1987 Reference tables for nickel-chromium-silicon Sep 2008 (Nicrosil/Nisil) Type N Thermocouples

56 IS 12188:1987 Electric direct-arc melting furnaces Feb 2008

57 IS 12434:1988 Coating/plating thickness tester, destructive type Sep 2008

58 IS 12554(Part 1):1988 Non-destructive coating thickness testing Sep 2008 instruments: Part 1 Eddy current instruments

59 IS 12554(Part 2):1999 Non-destructive coating thickness testing Aug 2004 instruments: Part 2 Magnetic instruments

60 IS 12555:1988 Signal conditioning devices for process control Sep 2008

61 IS 12556:1988 Binary direct voltage signals for process Sep 2008 measurement and control systems

62 IS 12579:1988 Base-metal mineral insulated thermocouple cables Sep 2008 and thermocouples

63 IS 13122(Part 1):1993 Transmitters for use in industrial process control May 2006 systems: Part 1 Methods for evaluating the performance

64 IS 13122(Part 2):1991 Transmitters for use in industrial process control May 2006 systems: Part 2 Guidance, installation, inspection and routine testing

65 IS 13211:1991 Vapour pressure dial-type thermometers May 2006

66 IS 13263:1992 Methods of test for plasma equipment for Sep 2008 | IEC 60680(1980) electroheat installations. 67 IS 13673(Part 1):1993 Expression of performance of elctro chemical Sep 2008 analyzers :Part 1 General

68 IS 13673(Part 2):1993 Expression of performance of electrochemical Sep 2008 1 analyzers :Part 2 pH values

69 IS 13673(Part 3):1993 Expression of performance of electrochemical Sep 2008 analyzers: Part 3 Electrolytic conductivity

70 IS 13673(Part 4):1998 Expression of performance of electrochemical Dec 2008 analyzers :Part 4 Standard for measuring oxygen dissolved in water

71 IS 13673(Part 5):1999 Expression of performance of electrochemical Feb 2009 analyzers :Part 5 Oxidation reduction potential or retard potential

72 IS 14254(Part 1):2003 Programmable controller: Part 1 General Mar 2011 / IEC 61131-1(2003) information 73 IS 14254(Part 2):2003 Programmable Controllers: Part 2 Equipment May 2006 / IEC 61131-2(2003) Requirements and Tests (first revision)


61

74 *IS 60519(Part 1):1984 Safety in electro-heat installations: Nov 2010 / IEC 60519-1:1984 Part 1General requirements [Superseding IS 9080 ( Part 1)].

75 IS 60519(Part 3):1988 Safety in electroheat installations: Nov 2010 / IEC 60519-3:1988 Part 3 Particular requirements for induction and conduction heating and induction melting installations [Superseding IS 9080 (Part 3 )].

76 IS 60519(Part 5):1980 Safety in electroheat installation : Nov 2010 / IEC 60519-5:1980 Part 5 Plasma installations 77 *IS 60519(Part 9):1987 Safety in electroheat installations: Nov 2010 / IEC 60519-9:1980 Part 9 Particular requirements for high frequency dielectric heating installations

78 IS 60534(Part 2/Sec 3):1997 Industrial - process control valves - Part 2/Sec 3 Oct 2008 / IEC 60534-2-3 :1997 flow capacity test procedures 79 IS 61308:1994 High frequency dielectric heating installations -Test Nov 2010 / IEC 61308:1994 methods for the determination of power 80 IS 61508(Part 0):2000 Functional safety of / (IEC 61508-0:2005) electrical/electronic/programmable electronic Nov 2008 safety - related system - Part 0: Functional Safety

81 IS 61508(Part 1):2000 Functional safety of electrical/electronic/ Oct 2008 / IEC 61508-1:2000 progrtammable elctronic safety - related system - Part 1 General requirement

82 IS 61508(Part 2):2000 Functional safety of electrical/electronic/ Oct 2008 / (IEC 61508-2:2000) /programmable electronic safety - related system – Part 2 requirement for electrical/Electronic/ programmable electronic

83 IS 61508(Part 3):1998 Functional safety of electrical/electronic/ Oct 2008 / (IEC 61508-3:1998) programmable electronic safety - related system – Part 3 software

84 IS 61508(Part 4):1998 Functional safety of electrical/electronic/ Dec 2008 / (IEC 61508-4:1998) programmable electronic safety - related system – Part 4 Definitions and

85 IS 61508(Part 5):1998 Functional safety of electrical/electronic/ Oct 2008 / (IEC 61508-5:1998) programmable electronic safety - related system – Part 5 Examples of

86 IS 61508(Part 6):2000 Functional safety of electrical/electronic/ Dec 2008 / (IEC 61508-6:2000) programmable electronic safety - related system – Part 6 Guidelines on the

87 IS 61508(Part 7):2000 Functional safety of electrical/electronic/ Jan 2009 / IEC 61508-7:2000) programmable electronic safety - related system – Part 7 Over view of

88 IS 61511(Part 1):2003 Functional safety of electrical/electronic/ Jan 2009 / (IEC 61511-1:2003) programmable electronic safety - related system – Part 1 Framework, definitions, System, hardware and software

89 IS 61511(Part 2):2003 Functional safety - safety instrumented systems Oct 2008 / IEC 61511-2:2003 for the process industry sector Part 2 Guidelines for the Applications


62

90 IS 61511(Part 3):2003 Functional safety - safety instrumented systems Jan 2009 / IEC 61511-3:2003 for the process industry sector - Part 3 Guidance for the determination of the required safety

91 IS 62264(Part 1):2003 Enterprise control system Integration Part 1 Models July 2008 / IEC 62264-1:2003 and Terminology 92 IS 62264(Part 2):2004 Enterprise control system Integration Part 2 July 2008 / IEC 62264-2:2004 Objects Models Attributes DRAFT STANDARDS ISSUED IN WIDE CIRCULATION

1 DOC.ETD 18(5614) Safety in electroheat installations: Part 2 Particular requirements for resistance [IEC 60519-

2 DOC.ETD 18(5615) Safety in electroheat installations: Part 4 Particular requirements for arc furnace installations [IEC 60519-4(2000)]

3 DOC.ETD 18(5616) Safety in electroheat installations: Part 11 Particular requirements for installations for electromagnetic stirring, transport or pouring of metal liquids[IEC 60519-11(1997)]

4 DOC.ETD 18(5617) Test methods for crucible induction furnaces [IEC 60646(1992)]

5 DOC.ETD 18(5671) Industrial Process Control Valves - Part 1Control Valve Terminology and General Considerations [First revision of IS 10189(Part 1)] (IEC 60534-

6 DOC.ETD 18(5675) Industrial Process Control - Safety of Analyser Houses (IEC 61285:2004)


1 DOC.ETD 18(5612) Safety in electroheat installations: Part 1 General requirements [first revision of IS 60519 (Part 1):1984/

2 DOC.ETD 18(5613) Safety in electroheat installations: Part 9 Particular requirements for high frequency dielectric heating installations [first revision of IS 60519 (Part 9):1987/


63

ETD 19 HIGH VOLTAGE ENGINEERING SCOPE To prepare standards for high voltage testing techniques and for different types of tests belonging there to such as high voltage ac, dc and impulse tests and high current impulse tests, definitions and basic principles of insulation coordination and insulation levels To prepare appllication guides recommending the insulation levels in relation to possibilities of over-voltage protection devices. The work also includes formulation of standards for clearances and creepage

Sl. No. IS Number/ DOC Number Title Reaffirm No. of Date Amd. STANDARDS PUBLISHED 1 *SP 39 : 1987 Special publication-Guide for insulation Mar 2011 coordination within low voltage systems

2 IS 1876:2005 Voltage measurement by means of standard air Oct 2010 / IEC 60052:2002 gaps(first revision) 3 IS 2071(Part 1):1993 High voltage test- techniques: Part 1 General Aug 2008 / IEC 60060-1:1989 definitions and test requirements (second revision). 4 *IS 2071(Part 3):1976 Methods of high voltage testing: Part 3 Measuring Mar 2011 devices (first revision)

5 **IS 2165(Part 1):1977 Insulation coordination: Mar 2011 1 | IEC 60071-1:1976 Part 1 Phase to earth insulation coordination principles and rules (second revision)

6 **IS 2165(Part 2):1983 Insulation coordination: Part 2 Phase to phase Mar 2011 | IEC 60071-3:1982 insulation coordination principles and rules 7 *IS 3716:1978 Application guide for insulation coordination (first Mar 2011 2 | IEC 60071-2:1976 revision) 8 *IS 8690:1977 Application guide for measuring Mar 2011 devices for high voltage testing

9 IS 15382(Part 1):2003 Insulation coordination for equipment within low Sep 2008 / IEC 60664-1(2002) voltage system: Part 1 Principles requirements and 10 IS 15382(Part 2/Sec 1):2003 Insulation coordination for equipment within low Sep 2008 / IEC 60664-2-1(1977) voltage system : Part 2 Appication guide, Section 1 Dimensioning procedure worksheets and dimensioning examples

11 IS 15382(Part 3):2006 Insulation coordination for equipment within low Aug 2011 / IEC 60664-3(2003) voltage system: Part 3 Use of coatings, potting or moulding for protection against pollution

12 IS 15382(Part 4):2003 Insulation coordination for equipment within low Sep 2008 / IEC 60664-4(1997) voltage system: Part 4 Consideration of high frequency voltage stress

13 IS 15638(Part 1):2006 Instruments and software used for measurement in Feb 2011 / IEC 61083-1(2001) high voltage impluse tests: Part 1 Requirements for instruments( Superseeding IS 11349)

14 IS 15638(Part 2):2006 Instruments and software used for measurements Feb 2011 / IEC 61083-2(1996) in high voltage impulse tests: Part 2 Evaluation of software used for the determination of the parameters of impulse waveforms (Superseeding


64


1 DOC.ETD 19(5833) High Voltage test-techniques Part 3: Definitions and requirement for on-site testing (IEC 60060-3)

2 DOC.ETD 19(6212) Insulation Coordination - Part 2 Application guide (IEC 60071-2:1996)

3 DOC.ETD 19(6222) Insulation Coordination - Part 1 Definitions, parinciples and rules (IEC 60071-1:2006)

4 DOC.ETD 19(5429) High voltage test techniques - Partial discharge measurements (IEC 60270:2000) (Superseeding IS 6209)


1 DOC.ETD 19(6331) High voltage test techniques - Part 2 Measuring systems (IEC 60060-2:2010) * INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS

65

ETD 20 ELECTRICAL INSTALLATIONS SCOPE To prepare standards for safety and related matters in designing, erection and maintenance of electrical installations from the point of view of safety and good practice that would, amongst other things, promote compatibility between such standards and those concerning The work includes electrical installations in buildings for different occupancies and outdoor sites of temporary or permanent nature and also installations in the ships NOTE- The standards to be prepared will not cover codes pertaining to individual equipment


1 SP 30 : 2011 National Electrical Code (first revision)

2 SP 31 : 1986 Special Publication-Chart on treatment for electric- Mar 2011 shock

3 IS 732:1989 Code of practice for electrical wiring installations Mar 2010 (third revision)

4 IS 2309:1989 Code of practice for protection of buildings Mar 2010 1 and

5 IS 2551:1982 Danger notice plates (first revision) Mar 2010

6 IS 3043:1987 Code of practice for earthing Mar 2011 2

7 IS 4648:1968 Guide for electrical layout in residential buildings Aug 2007

8 IS 5216(Part 1):1982 Recommendations on safety procedures and Mar 2010 practices

9 IS 5216(Part 2):1982 Recommendations on safety procedures and Mar 2010 practices in electrical work: Part 2 Life saving techniques (first revision)

10 IS 7689:1989 Guide for the control of undesirable static Mar 2010 electricity

11 IS 7752(Part 1):1975 Guide for improvement of power factor in Mar 2011 consumer installation: Part 1 Low and medium

12 IS 8061:1976 Code of practice for design, installation and Mar 2011 maintenance of service lines upto and including

13 IS 8437(Part 1):1992 Guide on effects of current passing through human Aug 2007 / IEC 60479-1:1984 body: Part 1General aspects(first revision) 14 IS 8437(Part 2):1992 Guide on effects of current passing through human Aug 2007 / IEC 60479-2:1987 body : Part 2 Special aspects (first revision). 15 IS 8884:1978 Code of practice for the installation of electric bells Aug 2007 and call systems


66

16 IS 8923:1978 Warning symbol for dangerous voltages Mar 2010

17 IS 8969:1978 Code of practice for installation and maintenance Mar 2011 of impulse and electronic master and slave electric clock systems

18 IS 10118(Part 1):1982 Code of practice for selection, installation and Mar 2011 maintenance of switchgear and controlgear : Part 1 General

19 IS 10118(Part 2):1982 Code of practice for selection, installation and Mar 2011 maintenance of Switchgear and controlgear : Part 2 Selection

20 IS 10118(Part 3):1982 Code of practice for selection, installation and Mar 2011 maintenance of switchgear and controlgear : Part 3 Installation

21 IS 10118(Part 4):1982 Code of practice for selection, installation and Mar 2011 maintenance of switchgear and controlgear : Part 4 Maintenance

22 IS 10242(Part 1/Sec 1):1997 Electrical installations in ships: Part 1 General, Sep 2007 | IEC 60092-101:1980 Section 1 Definitions and general requirements 23 *IS 10242(Part 2/Sec 1):1982 Electrical installations in ships: Part 2 System Mar 2009 | IEC 60092-201:1980 design, Section 1 General 24 IS 10242(Part 2/Sec 2):1983 Electrical installations in ships: Part 2 System Sep 2007 | IEC 60092-202:1980 design, Section 2 Protection 25 IS 10242(Part 2/Sec 4):1993 Electrical installationss in ships: Part 2 System Mar 2009 | IEC 60092-204:1987 design, Sec 4 Electric and electrohydraulic steering 26 IS 10242(Part 3/Sec 1):1983 Electrical installations in ships: Part 3 Equipment, Sep 2007 | IEC 60092-301:1980 Section 1 Generators and motors 27 IS 10242(Part 3/Sec 2):1984 Electrical installations in ships: Part 3 Equipment, Sep 2007 | IEC 60092-302:1980 Section 2 Switchgear and controlgear assemblies 28 IS 10242(Part 3/Sec 3):1984 Electrical installations in ships: Part 3 Equipment, Sep 2007 | IEC 60092-303:1980 Section 3 Transformers for power and lighting 29 IS 10242(Part 3/Sec 4):1987 Electrical installations in ships: Part 3 Equipment, Sep 2007 | IEC 60092-304:1980 Section 4 Semi-conductor convertors 30 IS 10242(Part 3/Sec 5):1990 Electrical installations inn ships: Part 3 Equipment, Sep 2007 | IEC 60092-305:1980 Section 5 Accumulators (storage) batteries 31 IS 10242(Part 3/Sec 6):1986 Electrical installations in ships: Part 3 Equipment, Sep 2007 | IEC 60092-306:1980 Section 6 Luminaires and accessories 32 IS 10242(Part 3/Sec 7):1990 Electrical installations in ships:Part 3 Equipment, Sep 2007 | IEC 60092-307:1980 Section 7 Heating and cooking appliances 33 IS 10242(Part 3/Sec 10):1992 Electrical installations in ships: Part 3 Equipment, Mar 2009 | IEC 60092-350 Section 10 General construction and test requirements for low voltage shipboard power cables

34 IS 10242(Part 3/Sec 11):1986 Electrical installations in ships: Part 3 Equipment, Sep 2007 | IEC 60092-35:1983 Section 11 Insulating materials for shipboard power cables


67

35 IS 10242(Part 3/Sec 12):1986 Electrical installations in ships: Part 3 Equipment, Sep 2007 | IEC 60092-352:1979 Section 12 Choice and installation of cables for low voltage systems

36 IS 10242(Part 3/Sec 13):1992 Electrical installations in ships: Part 3 Equipment, Sep 2007 | IEC 60092-353:1988 Section 13 Single and multicore cables with extruded solid insulation for rated voltage 0.6/1 kV

37 IS 10242(Part 3/Sec 19):1990 Electrical installations in ships: Part 3 Equipment, Sep 2007 | IEC 60092-359:1987 Section 19 Sheathing materials for telecommunication and power shipboard cables

38 IS 10242(Part 3/Sec 23):1987 Electrical installations in ships: Part 3 Equipment, Sep 2007 | IEC 60092-373:1977 Section 23 Shipboard telecommunication cables and radio frequency cables: Shipboard flexible coaxial cables

39 IS 10242(Part 3/Sec 24):1987 Electrical installations in ships: Part 3 Equipment, Sep 2007 | IEC 60092-374:1977 Section 24 Shipboard telecommunication cables and radiofrequency cables: Telephone cables for non-essential communication services

40 IS 10242(Part 3/Sec 25):1987 Electrical installations in ships: Part 3 Equipment, Sep 2007 | IEC 60092-375:1977 Section 25 Shipboard telecommunication cables and radio frequency cables: General instrumentation, control and communication cables

41 IS 10242(Part 3/Sec 26):1987 Electrical installations in ships: Part 3 Equipment, Sep 2007 | IEC 60092-376:1983 Section 26 Shipboard telecommunication cables: Shipboard multicore cables for control circuits

42 IS 10242(Part 4):1992 Electrical installations in ships: Part 4 Installation Sep 2007 | IEC 60092-401:1980 and test of completed installation 43 IS 10242(Part 5/Sec 1):1993 Electrical installations in ships: Part 5 Special Mar 2009 | IEC 60092-501:1984 features, Sec 1 Electric propulsion plant 44 *IS 10242(Part 5/Sec 2):1997 Electrical installations in ships: Part 5 Special Sep 2007 | IEC 60092-502:1999 features, Section 2 Tankers 45 IS 10242(Part 5/Sec 3):1993 Electrical installations in ships: Part 5 Special Mar 2009

| IEC 60092-503:1975 features Sec 3 ac supply system with voltage in the range above 1 kV up to and including 11 kV

46 IS 10242(Part 5/Sec 4):1998 Electrical installations in ships : Part 5 Special Dec 2008 | IEC 60092-504:2001 features, Section 4 Control and instruments 47 IS 13234:1991 Guide for short circuit current calculations ln Aug 2007 / IEC 60909:1988 three-phase ac systems(superseding IS 5728) 48 IS 13235:1991 Calculation of the effects of short-circuit currents Aug 2007 / IEC 60865:1986 Superseding IS 5728:1970) 49 IS 14479:1997 Electromagnetic compatibility of electrical and Sep 2007 | IEC 60 533:1999 electronic installation in ships DRAFT STANDARDS FORMULATED

1 DOC.ETD 20(5838) Revision of IS 732 Electrical Wiring Installations

2 DOC.ETD 20(6447) Protection against lightning : Part 1General principles (IEC 62305-1)


68

3 DOC.ETD 20(6449) Protection against lightning : Part 3 Physical damage to structures and life hazard (IEC 62305-3)

4 DOC.ETD 20(6450) Protection against lightning : Part 4 Electrical and electronic systems within structures (IEC 62305-4) * INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS

69

ETD 21 ELECTRIC WELDING EQUIPMENT SCOPE To prepare standards on the construction, performance, testing and safety requirements for electric welding equipment and accessories for both arc and resistance type


STANDARDS PUBLISHED

1 IS 1851:1997 Single Operator type arc welding Sep 2007 | ISO 700:1982 transformers (third revision) 2 IS 2635:1997 dc electric welding generators (third revision) Sep 2007

3 IS 2641:1989 Electrical welding accessories (first revision) Jun 2010

4 IS 4559:1993 Single operator rectifier type dc arc Mar 2009 | ISO 700:1982 welding power source (second revision) 5 IS 4804(Part 1):1968 Resistance welding equipment : Jun 2010 Part 1 Single phase transformers

6 IS 4804(Part 2):1968 Resistance welding equipment: Jun 2010 1 Part 2 Single phase rocker-arm spot welding

7 IS 4804(Part 3):1969 Resistance welding equipment: Jun 2010 1 Part 3 Single phase spot and projection welding machines

8 IS 4804(Part 4):1973 Resistance welding equipment: Jun 2010 Part 4 Single phase stationary, press type roll-spot and seam welding machines

9 IS 6008:1989 Single operator ac/dc arc welding Mar 2009 | IEC 700:1982 power source (first revision) 10 IS 7931(Part 1):1975 Automatic and semi-automatic welding equipment Mar 2009 with self-adjusting arcs (MIG/MAG processes) : Part 1

11 IS 7931(Part 2):1975 Automatic and semi-automatic welding equipment Mar 2009 1 with self-adjusting arcs (MIG/MAG Processes): Part 2 Transformer rectifier power source

12 IS 7931(Part 3):1975 Automatic and semi-automatic welding equipment Mar 2009 1 with self-adjusting arcs (MIG/MAG Processes): Part 3 Welding gun and ancillary equipment

13 IS 8804:1993 Plugs, sockets and terminal arrangements Mar 2009 | IEC 501:1975 and welding cable connectors for manual welding equipment (first revision)

14 IS 9604:1994 Tungsten-inert gas (TIG) welding equipment Mar 2009

15 IS 13339:1992 Multi-operator type arc welding transformers Sep 2007


70

ETD 22 ELECTRICAL APPARATUS FOR EXPLOSIVE ATMOSPHERES SCOPE To prepare guidelines and requirements for electrical apparatus for use where there is a hazard due to the possible presence of ignitable gas, vapour liquid particles or dust in the atmosphere.


STANDARDS PUBLISHED

1 IS 3682:1966 Flameproof ac motors for use in mines Jan 2007 1

2 IS 4051:1967 Code of practice for installation and maintenance Oct 2011 of electrical equipment in mines

3 IS 5571:2009 Guide for selection and installation of electrical | IEC 60079-14(2002) equipment in hazardous areas (other than mines (third revision)

4 IS 5572:2009 Classification of hazardous areas (other than | IEC 60079-10(2002) mines) having flammable gases and vapours for electrical installation (third revision of IS 5572)

5 IS 5679:1986 Miners' cap lamp assemblies (incorporating lead Oct 2011 1 acid type batteries) (first revision)

6 *IS 7693:2004 Electrical apparatus for explosive gas atmospheres Apr 2009 1 / IEC 60079-6(1995) - Oil immersion "o" (first revision) 7 *IS 7820:2004 Electrical apparatus for explosive gas atmospheres May 2009 / IEC 60079-4(1975) - Method of test for ignition temperatures (first 8 IS 9559:1980 Guide for selection of electrical and electronic Oct 2011 equipment for coal mines

9 *IS 9570:1980 Classification of flammable gases or vapours Oct 2011 | IEC 60079-12 (1978) with air according to their maximum experimental safe gaps and minimum igniting currents

10 *IS 9735:2003 Electrical apparatus for explosive gas atmospheres Dec 2008 1 / IEC 60079-1-1(2002) - Flameproof enclosures "d" Method of test for ascertainment of maximum experimental safe gap

11 IS 9836:1981 Exploders Oct 2011

12 *IS 11064:1984 Guide for construction and use of rooms or Oct 2011 | IEC 60079-13(1982) buildings protected by pressurization for installation of electrical apparatus for explosive gas

13 IS 12315(Part 2):1988 Methods of determining the minimum ignition Apr 2008 | IEC 61241-2-1 temperature of dusts: Part 2 Dust cloud in a furnace at a constant temperature

14 *IS 14774(Part 1):2000 Resistance trace heating in potentially explosive Apr 2010 | IEC 62086-1 atmospheres: Part 1 General and testing 15 IS 14774(Part 2):2000 Resistance trace heating in potentially explosive Apr 2010 | IEC 62086-2 atmospheres: Part 2 Informative application guide for design, installation and maintenance * INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS

71

16 IS 15142:2002 Guide to the use of electrical apparatus for Sep 2007 potentially explosive atmospheres in the presence of combustible dusts

17 *IS 60079:2004 Electrical apparatus for explosive gas Aug 2010 / IEC 60079-0(2004) atmospheres: 18 IS 60079(Part 1):2007 Explosive atmospheres : Part 1 Equipment / IEC 60079-1(2007) protection by flameproof enclosures "d" (superseding IS 2148:2004 )

19 IS 60079(Part 2):2007 Explosive atmospheres: Part 2 Equipment / IEC 60079-2 (2007) protection by pressurized enclosure "p" (superseding IS 7389:2004)

20 IS 60079(Part 5):2007 Explosive atmospheres: Part 5 Equipment / IEC 60079-5 (2007) protection by powder filling "q" (superseding IS 7724:2004) 21 IS 60079(Part 7):2006 Explosive atmospheres: Part 7 Equipment / IEC 60079-7 (2006) protection by increased safety "e" (superseding IS 6381:2004) 22 IS 60079(Part 11):2006 Explosive atmospheres: Part 11 Equipment / IEC 60079-11(2006) protection by intrinsic safety "i" (superseding IS 5780:2002) 23 IS 60079(Part 15):2005 Electrical apparatus for explosive gas atmospheres / IEC 60079-15(2005) : Part 15 Construction, test and marking of type of protection "n" electrical apparatus (superseding IS 8289)

24 IS 60079(Part 16):1990 Electrical apparatus for explosive gas April 2008 / IEC 60079-16 (1990) atmospheres: Part 16 Artificial ventilation for the protection of analyzer(s) houses

25 IS 60079(Part 17):2007 Explosive atmospheres : Part 17 Electrical / IEC 60079-17 (2007) installations inspection and maintenance 26 *IS 60079(Part 18):2004 Electrical apparatus for explosive gas atmospheres / IEC 60079-18:2004 : Part 18 Construction, test and marking of type of protection encapsulation "m" electrical apparatus

27 IS 60079(Part 19):2006 Explosive atmospheres : Part 19 Repair, / IEC 60079-19(2006) overhaul and reclamation 28 *IS 60079(Part 20):1996 Electrical apparatus for explosive gas atmospheres / IEC 60079-20 (1996) : Part 20 Data for flammable gases and vapours relating to the use of electrical apparatus

29 IS 60079(Part 25):2003 Electrical apparatus for explosive gas atmospheres Nov 2010 / IEC 60079-25(2003) : Part 25 Intrinsically safe systems 30 IS 61241(Part 0):2004 Electrical apparatus for use in the presence of May 2009 combustible dust: Part 0 General requirements (Superseding IS 14154(Part 1) : 1996

31 IS 61241(Part 1):2000 Electrical apparatus for use in the presence of April 2009 combustible dust: Part 1: Protection by enclosures “tD” (Superseding IS 12315-1:1998)

32 IS 61241(Part 10):2004 Electrical apparatus for use in the presence of April 2009 combustible dust: Part 10 : Classification of areas where combustible dusts are or may be present


72

33 IS 61241(Part 11):2005 Electrical apparatus for use in the presence of May 2009 combustible dust: Part 11 Protection by intrinsic safety “iD”

34 IS 61241(Part 14):2004 Electrical apparatus for use in the presence of May 2009 combustible dust: Part 14 Selection and installation (Superseding IS 14154(Part 2) : 1997 & IS 13408-1 : 1992)

35 IS 61241(Part 18):2004 Electrical Apparatus for Use in the Presence of May 2009 Combustible Dust: Part 18 Protection by Encapsulation

36 IS 61241(Part 2/Sec 3):1994 Electrical apparatus for use in the presence of April 2009 / IEC 61241-2-3(1994) combustible dust: Part 2 Test methods, Section 3 Method for determining minimum ignition energy of dust/air mixtures


1 DOC.ETD 22(5901) Electrical apparatus for use in the presence of / IEC 61241-2-1(1994) combustible dust: Part 2 Test methods, Section 1 Method for determining the minimum ignition temperatures of dust

2 DOC.ETD 22(5903) Electrical apparatus for use in the presence of / IEC 61241-4 (2004) combustible dust: Part 4 Type of protection “pD” 3 DOC.ETD 22(5912) Explosive atmospheres: Part 6 Equipment / IEC 60079-6 (2007) protection by oil immersion "o" (superseding IS 4 DOC.ETD 22(6103) Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases

5 DOC.ETD 22(6104) Explosive atmospheres - Part 29-2: Gas detectors - selection, installations, use and maintenance of detectors for flammable gases and oxygen

6 DOC.ETD 22(6232) Explosive Atmospheres. Part 0: Equipment - / IS/IEC 60079-0(2007) General Requirements (first revision) 7 DOC.ETD 22(6261) Explosives Atmospheres Part 31 Equipment / IS/IEC 60079-31 Dust Ignition Protection By Enclosures"T" 8 DOC.ETD 22(6262) Explosive Atmospheres Part 20 material / IS/IEC 60079-20-1 Characteristics For Gas and Vapour Classification Section 1 Test Methods and Data(Superseding IS 7820, IS 9570, IS 9735, IS/IEC 60079-20)

9 DOC.ETD 22(6263) Explosive Atmospheres Part 26 Equipment With / IS/IEC 60079-26 Equipment Protection Level EPL "Ga" 10 DOC.ETD 22(6264) Explosive Atmospheres Part 27 Fieldbus / IS/IEC 60079-27 Intrisically Safe Concept (FISCO) 11 DOC.ETD 22(6265) Explosive Atmospheres Part 28 Protection of / IS/IEC 60079-28 Equipment And Transmission Systems Using Optical Radiation

12 DOC.ETD 22(6266) Explosive Atmospheres Part 30 Electrical / IS/IEC 60079-30-1 Resistance Trace Heating Section 1 General And Testing Requirements (Superseding IS 14774 (Part


73

13 DOC.ETD 22(6267) Explosives Atmospheres Part 30 Electrical / IS/IEC 60079-30-2 Resistance Trace Heating Section 2 Application Guide for Design , Installation And Maintenance (Superseding IS 14774 (Part 2)

14 DOC.ETD 22(6268) Explosive Atmospheres Part 18 Equipment / IS/IEC 60079-18 Protection By Encapsulation "m" (first revision) DRAFT STANDARDS ISSUED IN WIDE CIRCULATION

1 DOC.ETD 22(6400) Explosive Atmospheres – Part 10-2: Classification / IEC 60079-10- (2009) of areas –Combustible dust atmospheres 2 DOC.ETD 22(6401) Explosive Atmospheres - Part 13: Equipment / IEC 60079-13 (2010) protection by pressurized room "p" 3 DOC.ETD 22(6402) Explosive Atmospheres - Part 15: Equipment / IEC 60079-15 (2010) protection by type of protection "n" 4 DOC.ETD 22(6403) Explosive Atmospheres - Part 19: Equipment / IEC 60079-19 (2010) repair, overhaul and reclamation 5 DOC.ETD 22(6404) Explosive Atmospheres - Part 25: Intrinsically safe / IEC 60079-25 (2010) electrical systems 6 DOC.ETD 22(6405) Explosive Atmospheres Part 29-4: Gas detectors - / IEC 60079-29-4(2009) Performance requirements of open path detectors for flammable gases

7 DOC.ETD 22(6406) Electrical apparatus for use in the presence of / IEC 61241-2-2(1994) combustible dust - Part 2 : Test methods – Section 2: Method for determining the electrical resistivity of dust in layers


1 DOC.ETD 22(6191) Code of practice for electrical and electronic equipments for belowground coal mines


74

ETD 23 ELECTRIC LAMPS AND THEIR AUXILIARIES SCOPE To prepare standards for all types of electric lamps, caps and their auxiliaries (luminaires are excluded)


STANDARDS PUBLISHED

1 IS 418:2004 Tungsten filament lamps for domestic and similar Mar 2009 2 | IEC 60064(1993) general lighting purposes (fourth revision) 2 IS 897:1982 Tungsten filament electric lamps for railway rolling Mar 2010 3 stock (second revision)

3 IS 1534(Part 1):1977 Ballasts for fluorescent lamps: Jul 2006 5 | IEC 82(1973) Part 1 For switch start circuits (second revision) 4 IS 1569:1976 Capacitors for use in tubular fluorescent Jul 2006 1 | IEC 566 high pressure mercury and low pressure sodium vapour discharge lamp circuits ( first revision)

5 IS 1901:1978 Visual indicator lamps (first revision) Oct 2007 1

6 IS 2215:2006 Starters for fluorescent lamps (third revision) Jun 2010 | IEC 60155 (1993) 7 IS 2261:1975 Lamps for flashlights (first revision) Dec 2010 1

8 IS 2262:1963 Transformers for high voltage luminous discharge Jul 2006 tubes

9 IS 2407:1963 Photometric integrators Oct 2007

10 IS 2418(Part 1):1977 Tubular fluorescent lamps for general lighting Dec 2010 7 | IEC 81(1974) service: Part 1 Requirements and tests (first revision) 11 IS 2418(Part 2):1977 Tubular fluorescent lamps for general lighting Jul 2006 3 | IEC 81(1974) service : Part 2 Standard lamp data sheets (first revision)

12 IS 2418(Part 3):1977 Tubular fluorescent lamps for general lighting Jul 2006 1 | IEC 61-1(1969) service : Part 3 Dimensions of G-5and G-13 bi-pin caps (first revision)

13 IS 2418(Part 4):1977 Tubular fluorescent lamps for general lighting Oct 2007 | IEC 61-3(1969) service: Part 4 Go and no-go gauges for G-5 and G-13 bi-pin caps (first revision)

14 IS 2592:1980 Lamps for lighting on board ships (first revision) Oct 2007 15 IS 2596:2004 Bulbs (lamps) for miners cap lamps (second revision) Sep 2009

16 IS 6616:1982 Ballasts for high pressure mercury vapour lamps Jul 2006 1 | IEC 262(1969) (first revision)


75

17 IS 6701:1985 Tungsten filament miscellaneous electric lamps Jul 2006 2 | IEC 61-1(1969) (first revision) 18 IS 7013:1981 Radio dial lamps (first revision) Oct 2007

19 IS 7027:1984 Transistorized ballasts for fluorescent lamps Jul 2006 | IEC 452(1982) (first revision) 20 IS 8685:1977 Aircraft lamps Jul 2006 | IEC 60434 (1973) 21 IS 8901:1978 Lamps for aerodrome lighting fittings Jul 2006 1

22 IS 8913:1978 Methods of measurement of lamp cap temperature Oct 2007 | IEC 360(1971) 23 IS 9206:1979 Dimensions of caps for tungsten filament Dec 2007 2 | IEC 60061-1(1972) general service electric lamps 24 IS 9589:1980 Electric lamps for railway signalling Oct 2007

25 IS 9900(Part 1):1981 High pressure mercury vapour lamps: Oct 2007 4 | IEC 188(1974) Part 1 Requirements and test (Superseding IS:2183 and IS:7023)

26 IS 9900(Part 2):1981 High pressure mercury vapour lamps: Part 2 Oct 2007 1 | IEC 188(1974) Standard lamp data sheets (superseding IS 2183 & IS 7023) 27 IS 9900(Part 3):1981 High pressure mercury vapour lamps : Oct 2007 | IEC 188(1974) Part 3 Dimensions of lamp caps (superseding IS:2183 and IS:7023)

28 IS 9900(Part 4):1981 High pressure mercury vapour lamps : Oct 2007 | IEC 61-3(1969) Part 4 Go and no-go gauges of lamp caps (superseding IS:2183 and IS:7023)

29 IS 9974(Part 1):1981 High pressure sodium vapour lamps : Oct 2007 4 | IEC 662(1980) Part 1 General requirements and tests 30 IS 9974(Part 2):1981 High pressure sodium vapour lamps : Oct 2007 2 | IEC 662(1980) Part 2 Standard lamp data sheets 31 IS 11980:1987 Lamp (bulb) cycle dynamo Oct 2007

32 IS 12449(Part 1):1988 Starting devices (other than glow starters): Jun 2008 1 | IEC 60926 Part 1 General and safety requirements 33 IS 12449(Part 2):1988 Starting devices (other than glow starters): Jun 2008 1 | IEC 60927 Part 2 Performance requirements 34 IS 12897:2001 Filaments for general service lamps-Guide Mar 2011 1 (first revision)

35 IS 12948:1990 Tungsten halogen lamps (non-vehicle) Jul 2006 | IEC 60357(1982) 36 IS 13021(Part 1):1991 AC supplied electronic ballasts for tubular Dec 2010 1 | IEC 60928(1990) florescent lamps: Part 1 General and safety requirement


76

37 IS 13021(Part 2):1991 AC supplied electronic ballasts for tubular Dec 2010 2 | IEC 60929(1990) florescent lamps: Part 2 Performance requirements 38 IS 14897:2000 Glass bulb designation system for lamps-Guide Dec 2010 | IEC 60887(1988) 39 IS 15111(Part 1):2002 Self ballasted lamps for general lighting services : Jan 2007 4 | IEC 60968(1988) Part 1 Safety requirements 40 IS 15111(Part 2):2002 Self ballasted lamps for general lighting services : Feb 2007 7 | IEC 60969(1988) Part 2 Performance requirements 41 IS 15518(Part 1):2004 Safety requirements for incandescent lamps : Aug 2009 2 | IEC 60432-1 (1999) Part 1 Tungsten filament lamps for domestic and similar general lighting purposes

42 IS 15687(Part 1):2006 Single-capped fluorescent lamps: Part 1 Safety | IEC 61199 (1999) requirements 43 IS 15882:2009 Ballasts for discharge lamps (excluding tubular fluorescent lamps) - Performance requirements [Superseding IS 6616 :1982]

44 IS 15885(Part 1):2011 Safety of lamp controlgear: Part 1 General requirements

45 IS 15885(Part 2/Sec 1):2011 Safety of lamp controlgear: Part 2 Particular requirements, Sec 1 Starting devices (other than glow starters

46 IS 15885(Part 2/Sec 3):2011 Safety of lamp controlgear: Part 2 Particular requirements, Sec 3 ac supplied electronic ballasts for fluorescent lamps

47 IS 15885(Part 2/Sec 8):2011 Safety of lamp controlgear: Part 2 Particular requirements, Sec 8 Ballasts for fluorescent

48 IS 15885(Part 2/Sec 9):2000 Safety of lamp controlgear: Part 2 Particular requirements, Sec 9 Ballasts for discharge lamps (excluding fluorescent lamps)

49 IS 15906:2010 Measurement of mercury level in fluorescent


1 DOC.ETD 23(5842) Single-capped fluorescent lamps: Part 2 Performance requirements

2 DOC.ETD 23(5880) Capacitor for tubular fluorescent lamps: Part 1 Safety requirements

3 DOC.ETD 23(5881) Capacitor for tubular fluorescent lamps: Part 2 Performance requirements

4 DOC.ETD 23(5943) Ballasts for tubular fluorescent lamps - Performance requirements

5 DOC.ETD 23(5963) ac supplied electronic ballasts for tubular fluorescent lamps - Performance requirements

6 DOC.ETD 23(5965) Auxiliaries for lamps - Starting devices (other than glow starters) - Performance requirements


77

7 DOC.ETD 23(6298) Self Ballasted LED-Lamps for General Lighting Services Part 1 Safety Requirements

8 DOC.ETD 23(6299) Self Ballasted LED-Lamps for General Lighting Services Part 1 Performance Requirements

9 DOC.ETD 23(6300) Led Modules for General Lighting- Safety

10 DOC.ETD 23(6301) Led Modules for General Lighting Part 2 Performance Requirements

11 DOC.ETD 23(6302) Lamp Control gear Part 2 Particular Requirements. Section 13 D.C. or A.C. Supplied Electronic Controlgear For Led Modules

12 DOC.ETD 23(6303) DC or AC Supplied Electronic Control Gear for LED Modules - Performance Requirements

13 DOC.ETD 23(6340) Photobiological Safety of Lamp and Lamp

14 DOC.ETD 23(6407) General Lighting - LEDs and LED Modules - Terms and Definitions


1 DOC.ETD 23(6304) Method of Measurement of Lumen Maintenance of Solid State Light (LED) Sources

2 DOC.ETD 23(6062) Double-capped fluorescent lamps for general lighting service - Specification: Part 2 Performance requirements [second revision of IS

3 DOC.ETD 23(6075) Metal halide lamps

4 DOC.ETD 23(6310) Method Of Electrical And Photometric Measurements Of Solid- State Lighting (Led) * INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS

78

ETD 24 ILLUMINATION ENGINEERING AND LUMINAIRES SCOPE To prepare codes of practice for interior and exterior lighting and standards for luminaires (including luminaires for use in hazardous area, aviation lighting, emergency lighting etc.


STANDARDS PUBLISHED

1 SP 72 : 2010 National Lighting Code Apr 2010

2 IS 1944(Part 5):1981 Code of practice for lighting of public thoroughfare: Mar 2008 Part 5 Lighting for grade separated junctions,

3 IS 1944(Part 6):1981 Code of practice for lighting of public thoroughfare: Mar 2008 Part 6 Lighting for towns and city centres and

4 IS 1944(Part 7):1981 Code of practice for lighting of public thoroughfare: Mar 2008 Part 7 Lighting for roadswith special requirements (Group F)

5 IS 1944(Part 1 & 2):1970 Code of practice for lighting of public thoroughfare: Mar 2008 2 Parts 1 and 2 For main and secondary roads

6 IS 2672:1966 Code of practice for library lighting May 2010

7 IS 3528:1966 Waterproof electric lighting fittings May 2010

8 IS 3553:1966 Watertight electric lighting fittings May 2010

9 IS 3646(Part 1):1992 Code of practice for interior illumination: Mar 2008 Part 1 General requirements and recommendations

10 IS 3646(Part 2):1966 Code of practice for interior illumination: Part 2 Mar 2008 Schedule of illumination and glare index

11 IS 3646(Part 3):1968 Code of practice for interior illumination: Part 3 Mar 2008 Calculation of coefficients of utilization by the BZ method

12 IS 4347:1967 Code of practice for hospital lighting May 2010

13 IS 5077:1969 Decorative lighting outfits May 2010 1

14 IS 6665:1972 Code of pratice for industrial lighting May 2010

15 IS 7537:1974 Road traffic signals Mar 2008


79

16 IS 7569:1987 Cast acrylic sheets for use in luminaires (first Mar 2008

17 IS 7678:1975 Method of photometric testing of incandescent Mar 2008 type luminaires for general lighting service

18 IS 7785(Part 1):1975 Elevated type aerodrome lighting fittings: Part 1 Mar 2008 General requirements

19 IS 7785(Part 2):1976 Elevated type aerodrome lighting fittings: Mar 2008 Part 2 Fixed focus high intensity bi-directional runway edge lighting fittings

20 IS 7785(Part 3):1976 Elevated type aerodrome lighting fittings: Mar 2008 Part 3 Low intensity runway edge lighting fittings

21 IS 7785(Part 4/Sec 1):1981 Elevated type aerodrome lighting fittings: Mar 2008 Part 4 Angle of approach lights, Section 1 Visual approach slope indicators

22 IS 7785(Part 5/Sec 1):1981 Elevated type aerodrome lighting fittings: Mar 2008 Part 5 Approach lighting fittings, Section 1 High intensity elevated approach lighting fittings

23 IS 7785(Part 6/Sec 1):1981 Elevated type aerodrome lighting fittings: Mar 2008 Part 6 Taxiway lights, Section 1 Low intensity omni-directional elevated taxiway lighting fittings

24 IS 8030:1976 Luminaires for hospitals Mar 2008 | IEC 162(1972) 25 IS 9583:1981 Emergency lighting units Mar 2008 | IEC 598-2-22(1980) 26 *IS 10322(Part 1):1982 Luminaires: Part 1 General requirements May 2010 | IEC 598-1(1979) 27 IS 10322(Part 2):1982 Luminaires: Part 2 Constructional requirements May 2010 | IEC 598-1(1979) 28 IS 10322(Part 3):1984 Luminaires:Part 3 Screw and screwless May 2010 terminations

29 IS 10322(Part 4):1984 Luminaires: Part 4 Methods of tests May 2010 | IEC 598-1(1979) 30 IS 10322(Part 5/Sec 1):1985 Luminaires: Part 5 Particular requirements, May 2010 2 | IEC 60598-2-1(1979) Section 1 General purpose luminaires 31 IS 10322(Part 5/Sec 2):1985 Luminaires: Part 5 Particular requirements, May 2010 1 | IEC 60598-2-2(1979) Section 2 Recessed luminaires 32 IS 10322(Part 5/Sec 3):1987 Luminaires:Part 5 Particular requirements, May 2010 4 | IEC 60598-2-3(1979) Section 3 Luminaires for road and street lighting (superseding IS:2149)

33 IS 10322(Part 5/Sec 4):1987 Luminaires: Part 5 Particular requirements, May 2010 1 | IEC 60598-2-4(1979) Section 4 Portable general purpose luminaires 34 IS 10322(Part 5/Sec 5):1987 Luminaires: Part 5 Particular requirements, May 2010 1 | IEC 60598-2-5 Section 5 Flood lights (superseding IS:1947)


80

35 IS 10894:1984 Code of practice for lighting of educational May 2010

36 IS 10947:1984 Code of practice for lighting for ports and harbours May 2010

37 IS 11071(Part 1):1984 Inset type aerodrome lighting fittings: May 2010 Part 1 General requirements and tests

38 IS 11071(Part 2):1984 Inset type aerodrome lighting fittings: May 2010 Part 2 Runway centre line lighting fittings

39 IS 11071(Part 3):1984 Inset type aerodrome lighting fittings: May 2010 Part 3 Approach lighting fittings

40 IS 11071(Part 4):1984 Inset type aerodrome lighting fittings: May 2010 Part 4 Touchdown zone lighting fittings

41 IS 11116:1984 Code of practice for lighting for airport aprons May 2010

42 IS 11472(Part 1):1985 Artificial day light for the assessment of colours: Mar 2008 Part 1 Illuminant for colour matching and colour appraisal

43 IS 11472(Part 2):1985 Artificial day light for the assessment of colours: Mar 2008 Part 2 Viewing conditions for graphic arts industry

44 IS 12290:1987 Isolating transformers for airport lighting Mar 2008

45 IS 12291:1987 Constant current regulators for airport systems Mar 2008

46 IS 12309(Part 1):1988 Code of practice for installation and maintenance Mar 2008 of aerodrome lighting fittings: Part 1 Installation

47 IS 12309(Part 2):1988 Code of practice for installation and maintenance Mar 2008 of aerodrome lighting fittings: Part 2 Maintenance

48 IS 13383(Part 1):1992 Methods of photometry of luminaires: May 2010 Part 1 For use in interior lighting

49 IS 13383(Part 2):1992 Methods of photometry of luminaires: Oct 2010 1 Part 2 For road and street lighting

50 IS 13383(Part 3):1992 Methods of photometry of luminaires: May 2010 Part 3 For flood lighting


1 DOC.ETD 24(5797) Luminaires: Part 1 General requirements and tests / IEC 60598-1(2003-10) [first revision of IS 10322 (Part 1 to Part 4)] 2 DOC.ETD 24(5994) Luminaires: Part 5 Particular requirements, Sec 2 Recessed luminaires [first revision of IS 10322 (Part 5/Sec 2)]

3 DOC.ETD 24(6038) Luminaires: Part 5 Particular requirements, Sec 1 Fixed general purpose luminaires [first revision of IS 10322 (Part 5/Sec 1)]


81

4 DOC.ETD 24(6039) Luminaires: Part 5 Particular requirements, Sec 3 Luminaires for road and street lighting [first revision of IS 10322 (Part 5/Sec 3)]

5 DOC.ETD 24(6120) Luminaires: Part 5 Particular requirements, Sec 4 Portable General Purpose [first revision of IS 10322 (Part 5/Sec 4)]

6 DOC.ETD 24(6121) Luminaires: Part 5 Particular requirements, Sec 5 Flood lighting [first revision of IS 10322 (Part 5/Sec 5)]

7 DOC.ETD 24(6122) Luminaires: Part 5 Particular requirements, Sec 6 Hand lamps

8 DOC.ETD 24(6123) Luminaires: Part 5 Particular requirements, Sec 7 Lighting chains

9 DOC.ETD 24(6124) Luminaires: Part 5 Particular requirements, Sec 8 Emergency lighting


1 DOC.ETD 24(6305) Led Luminaires for General Lighting purposes Part 1 - Safety Requirements

2 DOC.ETD 24(6306) Luminaires Performance Part 2 Particular Requirements Section 1: LED Luminaire

3 DOC.ETD 24(6351) Luminaires Performance Part 1 : General Requirements * INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS

82

ETD 25 LIFTS AND ESCALATORS SCOPE To prepare standards and codes of practice for electrically operated lifts and escalators, including equipment and components


1 IS 4591:1968 Code of practice for installation and maintenance Feb 2007 of escalators

2 IS 8216:1976 Guide for inspection of lift wire ropes Feb 2007

3 IS 14665(Part 1):2000 Electric traction lifts :Part 1 Outline dimensions Oct 2010 (superseeding IS 3534:1976)

4 IS 14665(Part 2/Sec 1 & Electric traction lifts :Part 2 Code of prtactice for Oct 2010 1 installation , operation and maintenance, Section 1 Passengers and goods lifts (Superseeding IS 1860:1980) ,Section 2 Service lifts (superseeding IS 6620:1972)

5 IS 14665(Part 3/Sec 1 & Electric traction lifts :Part 3 Safety rules , Section May 2010 1 1 Passenger and goods lifts (superseeding IS 4666:1980), Section 2 Service lifts (superseeding IS 6383:1971)

6 IS 14665(Part 4/Sec 1-9):2001 Electric traction lifts :Part 4 Components, Section Jun 2006 1 1 Lift buffers (superseding IS 9803:1981), Section 2 Lift guide rails and guide shoes (superseding IS 10191:1982 and IS 11615:1986,Section 3 Lift car frame, car counterweight and suspension (superseding IS 11706:1986), Section 4 Lift safety gears and governors (superseding IS 9878:1981), Section 5 Lift retiring cam (superseding IS 10448:1983), Section 6 Lift doors, locking devices and contacts (superseding IS 7759:1975 and 11633:1986), Section 7 Lift machines and brakes (superseding IS 10913:1984), Section 8 Lift wire ropes, Section 9 Controller and operating devices

7 IS 14665(Part 5):1999 Electric traction lifts:Part 5 Inspection manual Mar 2009

8 IS 14671:1999 Code of practice for instalation and maintenance Mar 2009 of hydraulic lifts

9 IS 15259:2002 Installation and maintenance of home lifts - Code Nov 2007 of practice

10 IS 15330:2003 Code of practice for installation and maintenance Mar 2008 of lifts for handicapped persons

11 IS 15785:2007 Code of practice for installation and maintenance of lifts without conventional machine rooms


83


1 DOC.ETD 25(6319) Construction and Installation of Escalators and Passenger Conveyors


1 DOC.ETD 25(6105) Electric traction lifts: Part 10 Poly phase electric motors for driving electric traction lifts * INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS

84

ETD 28 SOLAR PHOTOVOLTAIC ENERGY SYSTEMS SCOPE To prepare standards for systems of photovoltaic conversion of solar energy into electrical energy and for all the elements in the entire photovoltaic energy systems In this context, the concept photovoltaic energy systems includes the entire field from light input to solar cell and including the interface with the electrical system(s) to which energy is supplied


1 IS 12762(Part 1):2010 Photovoltaic devices: Part 1 Measurement of / IEC 60904-1:2006 photovoltaic current-voltage characteristics [first revision)

2 *IS 12762(Part 2):1993 Photovotaic devices: Part 2 Requirements for Apr 2009 / IEC 60904-2(1989) reference solar cells 3 *IS 12762(Part 3):1998 Photovoltaic devices: Part 3 measurement Apr 2009 / IEC 60904-3(1989) principles for terrestrial (PV) solar devices with reference spectral irradiance data

4 IS 12762(Part 5):2010 Photovoltaic devices: Part 5 Determination of the / IEC 60904-5:1993 equivalent cell temperature (ECT) of photovoltaic

5 IS 12762(Part 8):2000 Photovoltaic devices: Part 8 Measurement of / IEC 60904-8:1998) spectral response of a photovoltaic (PV) device 6 IS 12762(Part 9):2010 Photovoltaic devices: Part 9 Solar simulator / IEC 60904-9:2007 performance requirments 7 IS 12762(Part 10):2010 Photovoltaic devices: Part 10 Methods of linearity / IEC 60904-10:1998 measurment 8 IS 12763:1989 Procedures for temperature and irradiance Jan 2010 / IEC 60891(1987) corrections to measured I-V characteristics of crystaline silicon photovoltaic devices

9 *IS 12834:1989 Solar photovoltaic energy systems-Terminology Jan 2010

10 **IS 14153:1994 Guide for general description of photovoltaic (PV) Apr 2009 power generating systems

11 IS 14244:1995 Characteristic parameters of stand alone Jan 2010 / IEC 61194(1992) photovoltaic (PV) systems 12 IS 14286:2010 Crystalline silicon terrestrial photovoltaic (PV) / IEC 61215:2005 modules - Design qualification and type approval (first revision)

13 IS 61683:1999 Photovoltaic systems - Power conditioners - / IEC 61683:1999 Procedure for measuring efficiency 14 IS 61701:1995 Salt mist corrosion testing of photovoltaic (PV) / IEC 61701:1995) 15 IS 61724:1998 Photovoltaic system performance monitoring - / IEC 61724:1998 Guidelines for measurment, data exchange and analysis


85

16 IS 61725:1997 Analytical expression for daily solar profiles Jan 2010 / IS/IEC 61725(1997) 17 IS 61730(Part 1):2004 Photovoltaic (PV) module safety qualification: / IEC 61730-1:2004) Part 1 Requirements for construction 18 IS 61730(Part 2):2004 Photovoltaic (PV) module safety qualification: / IEC 61730-2:2004) Part 2 Requirements for testing 18 IS 61829:1995 Crystalline silicon photovoltaic (PV) array - On Feb 2010 / IEC 61829 : 1995 site FINALISED DRAFTS UNDER PRINT

1 DOC.ETD 28(6016) Solar photovoltaic energy systems - Terms and symbols (first revision of IS 12834) (IEC/TS 61836 2007:)

2 DOC.ETD 28(6018) Photovoltaic devices: Part 7 Computation of spectral mismatch error introduced in the testing of a photovoltaic device (IEC 60904-7 : 2008 )

3 DOC.ETD 28(6025) Thin-film terrestrial photovoltaic (PV) modules - Design qualification and type approval (IEC 61646 : 2008 )

4 DOC.ETD 28(6296) Photovoltaic devices Part 3 Measurement principles for terrestrial (PV) solar devices with reference spectral irradiance data (first revision of IS 12762 (Part 3)

5 DOC.ETD 28(6297) Procedures for temperature and irradiance corrections to measured I-V characteristics of crystaline silicon photovoltaic devices

6 DOC.ETD 28(6295) Photovoltaic devices: Part 2 Requirements for reference solar cells (first revision of IS 12762 (Part 2))


1 DOC.ETD 28(6414) Photovoltaic Systems - Power Conditioners - / IEC 61683(1999-11) Procedure for Measuring Efficiency 2 DOC.ETD 28(6415) Concentrator Photovoltaic (CPV) Modules And / IEC 62108(2007-12) Assemblies Design Qualification And Type 3 DOC.ETD 28(6416) Balance-Of-System Components For Photovoltaic / IEC 62093 (2005) Systems - Design Qualification Natural 4 DOC.ETD 28(6417) Safety Of Power Converters For Use in / IEC 62109-1(2010) Photovoltaic 5 DOC.ETD 28(6418) Safety Of Power Converters For Use In / IEC 62109-2 (2011) Photovoltaic Power Systems - Part 2: Particular Requirements For Inverters

6 DOC.ETD 28(6419) Photovoltaic (Pv) Stand-Alone Systems -Design / IEC 62124 (2010) Verification 7 DOC.ETD 28(6031) Photovoltaic (PV) systems - Characteristics of the utility interface (IEC 61727 : 2004)


86

ETD 29 POWER CAPACITORS SCOPE To prepare standards for power capacitors such as series and shunt capacitors for power systems, self-healing and non-self-healing power capacitors with metallized dielectric, ac motor capacitors,capacitors for inductive heating plants,voltage grading capacitors,coupling capacitors,energy storage capacitors etc. NOTE - The standards for capacitors used in electronic circuits are


1 IS 1709:1984 Capacitors for electric fan motors (first revision) Mar 2011 2 | IEC 252:1975 2 IS 2993:1998 A.C. motor capacitors (second revision) Jul 2008 / IEC 60252:1993 3 IS 9251:1979 Capacitors for inductive heat generating plants Mar 2011 1 | IEC 60110:1973 operating at frequencies between 40 and 24 000 Hz 4 IS 9348:1998 Coupling capacitor and capacitor dividers Jul 2008 / IEC 60358:1990 5 IS 9835(Part 1):2001 Series capacitors for power systems: Jan 2011 / IEC 60143-1:1992 Part 1 General performance testing and rating- Safety requirements - guide for installation (first revision)

6 IS 11530:1985 Voltage grading capacitor Mar 2011 | IEC 60358 :1990 7 IS 11548:1986 Capacitors for surge protection for use in Mar 2011 1 voltage system above 650 V and upto 33 kV

8 IS 12672:1989 Internal fuses and internal overpressure Mar 2011 / IEC 60593:1977 disconnectors for shunt capacitors 9 IS 12677:1989 Internal fuses for series capacitors Mar 2011 | IEC 60595:1977 10 IS 12730:1989 Internal fuses and internal overpressure Mar 2011 | IEC 60594:1977 disconnectors 11 IS 13203:1991 Method for verifying accuracy of tan-delta Mar 2011 | IEC 60996:1989 measuremnts 12 IS 13340:1993 Shunt capacitors for the self-healing type for ac Apr 2008 2 | IEC 60831-1:1988 power systems having rated voltage upto and 13 IS 13341:1992 Requirements for ageing test, self-healing test and Apr 2008 1 | IEC 60831-2:1988 destruction test on shunt capacitors of the self- healing type for ac power systems having a rated voltage upto and including 650 V

14 IS 13580:1992 Internal fuses and internal overpressure Apr 2008 | IEC 60594:1977 disconnectors for power electronic capacitors


87

15 IS 13585(Part 1):1994 Shunt capacitors of non- self- healing type for ac Aug 2009 1 | IEC 60931-1:1989 power systems having a rated voltage upto and including 650 V: Part 1 General

16 IS 13648:1993 Power electronics capacitors Apr 2008 | IEC 61071-1:1991 17 IS 13666:1993 Energy storage capacitors Sep 2008

18 IS 13925(Part 1):1998 Shunt capacitors for ac power systems having a Dec 2008 2 | IEC 60871-1:1987 rated voltage above 1000 V : Part 1General performance, testing and rating safety requirements - Guide for installation and operation

19 IS 13925(Part 2):2002 Shunt capacitors for ac power systems having a Mar 2007 / IEC60871-2:1999 rated voltage above 1000 V : Part 2 Endurance testing (first revision)

20 IS 13925(Part 3):2002 Shunt capacitors for ac power systems having a Mar 2007 / IEC 60871-3:1996 rated voltage above 1000 V: Part 3 Protection of shunt capacitors and shunt capacitors banks.

21 IS 15395:2003 Industrial ac net- work affected by harmonics- Oct 2008 / IEC 61642 :1997 application of filters and shunt capacitors 22 IS 15406(Part 1):2003 Capacitors for microwave ovens: Part 1 General Oct 2008 / IEC 61270-1:1996 FINALISED DRAFTS UNDER PRINT

1 DOC.ETD 29(6197) A,C motor capacitors - Part 2: Motor start capacitors (third revision of IS 2993) (IEC 60252-

2 DOC.ETD 29(6198) Shunt capacitors for AC power systems having a rated voltage above1 000V - Part 1 General (first revision of IS 13925(Part 1) (IEC 60871-1:2005

3 DOC.ETD 29(6199) Shunt capacitors for the self-healing type for ac power systems having rated voltage upto and including 1 000 V - Part 1 General performance, testing and rating - safety requirements - Guide for installation and operation (first revision of IS 13340 (Part 1) (IEC 60831-1:2002)

4 DOC.ETD 29(6200) Shunt capacitors of the self-healing type for ac systems having a rated voltage upto and including 1 000 V - Part 2 Ageing test self-healing upto and destruction test (first revision of IS 13340 (Part 2) (IEC 60831-2:1995)

5 DOC.ETD 29(6201) A,C motor capacitors - Part 1 : General - performance, testing and rating - Motor start capacitors safety requirements - Guide for installation and operation (third revision of IS

6 DOC.ETD 29(6202) Shunt capacitors of the non-self-healing type for ac systems having a rated voltage upto and including 1 000 V - Part 1 General - performance, - Guide for installation and operation (first revision of IS 13585 (Part 1) (IEC 60931-1:1996)


88

7 DOC.ETD 29(6203) Series capacitors for power systmes - Part 3 : Internal fuses (IEC 60143-3:1998)

8 DOC.ETD 29(6224) Shunt capacitors of the non-self-healing type for ac systems having a rated voltage upto and including 1 000 V - Part 3 Internal fuses (IEC

9 DOC.ETD 29(6225) Shunt capacitors of the non-self-healing type for ac systems having a rated voltage upto and including 1 000 V - Part 2 Ageing test and destruction test (IEC 60931-2:1996)

10 DOC.ETD 29(6226) Shunt capacitors for AC power systems having a rated voltage above1 000V - Part 4 Internal fusses (IEC 60871-4:2005 * INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS

89

ETD 30 SURGE ARRESTERS SCOPE To prepare standards on surge arresters and their accessories, application guide for surge arrestors for different locations


STANDARDS PUBLISHED 1 *IS 3070(Part 3):1993 Lightning arresters for alternating current systems Apr 2009 | IEC 60099-4:1991 :Part 3 Metal oxide surge-arresters without gaps 2 IS 15086(Part 1):2001 Surge arresters: Part 1 Non-linear resistor type Jul 2011 / IEC 60099-1:1991 gapped surge arresters for a.c. systems [Superseding IS 3 IS 15086(Part 3):2003 Surge arresters: Part 3 Artificial pollution testing of Jul 2008 | IEC 60099-3:1990 surge arresters 4 IS 15086(Part 5):2001 Surge arresters : Part 5 Selection and application Jul 2011 / IEC 60099-5:1996 recommendations (Superseading IS 4004) * INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS

90

ETD 31 POWER ELECTRONICS SCOPE To prepare standards regarding equipment and their components for electronic power switching NOTE 1 - Components which are comprised within the scope include electronic devices NOTE 2- The scope does not include telecommunication apparatus other than convertors for power supplies to such apparatus, nor does it include power supplies for electrical measurement NOTE 3- The standards for inverters for photovoltaic energy systems are excluded NOTE 4- Converters for HVDC systems are excluded


1 IS 2511:1963 Specification for Polycrystalline semiconductor Mar 2011 2 | IEC 60119(1960) rectifier stacks 2 IS 3136:1965 Specification for Polycrystalline semiconductor Mar 2011 | IEC 60119(1960) rectifier equipment 3 IS 3895:1966 Specification for Monocrystalline semiconductor Mar 2011 | IEC 60146(1963) rectifier cells and stacks 4 IS 4540:1968 Specification for Monocrystalline semiconductor Mar 2011 | IEC 60146(1963) rectifier assemblies and equipment 5 IS 6619:1972 Specification for Safety code for semiconductor Mar 2011 rectifier equipment

6 IS 7204(Part 1):1974 Specification for Stabilized power supplies dc Mar 2011 output:

7 IS 7204(Part 2):1980 Specification for Stabilized power supplies dc Mar 2011 | IEC 60478-2(1975) output: 8 IS 7204(Part 3):1980 Specification for Stabilized power supplies dc Mar 2011 | IEC 60478-3(1976) output: Part 3 Radio frequency interference tests 9 IS 7204(Part 4):1980 Specification for Stabilized power supplies dc Mar 2011 | IEC 60478-4(1976) output: Part 4 Tests other than radio-frequency interference.

10 IS 7788:1975 Specification for Single-phase traction power Mar 2011 | IEC 60411(1973) converters 11 IS 11260(Part 1):1985 Specification for Stabilized power supplies ac Mar 2011 | IEC 60686(1980) output: 12 IS 11260(Part 2):1985 Specification for Stabilized power supplies ac Mar 2011 | IEC 60686 (1980) output: 13 IS 13314:1992 Solid state invertors run from storage batteries - Apr 2008 Specification * INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS

91

14 IS 14256:1995 Rating specification for semiconductor power Mar 2010 | IEC 61136-1(1992) converters for adjustable speed electric drive systems - particularly for DC motor drives.

15 IS 15199(Part 1):2002 Power convertors: installed on board railway rolling Sep 2007 / IEC 61287-1(1995) stock - Part 1 Characteristics and test methods 16 IS 15199(Part 2):2002 Power convertors: installed on board railway rolling Sep 2007 / IEC 61287-2(2001) stock - Part 2 Additional technical information


1 DOC.ETD 31(6125) Uninterruptible power systems (UPS) : Part 1 General and safety requirements, Section 1 UPS used in operator access area

2 DOC.ETD 31(6126) Uninterruptible power systems (UPS) : Part 1 General and safety requirements, Section 2 General and safety requirements for UPS used in restricted access locations

3 DOC.ETD 31(6127) Uninterruptible power systems (UPS) : Part 2 electromagnetic compatibility (EMC) requirements

4 DOC.ETD 31(6128) Uninterruptible power systems (UPS):Part 3 Methods of specifying the performance and test


1 DOC.ETD 31(6432) Uninterruptible power systems (UPS) : Part 1 / IEC 62040-1 (2008) General and safety requirements, 2 DOC.ETD 31(6433) Uninterruptible power systems (UPS) : Part 3 / IEC 62040-3 (2011) Method of specifying the performance and test * INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS

92

ETD 32 ELECTRICAL APPLIANCES SCOPE To prepare standards for electrical appliances for household and similar purposes, including associated controls


STANDARDS PUBLISHED

1 SP 48 : 1991 Guide for requirements and testing of electric irons Mar 2009

2 SP 49 : 1991 Guide for requirements and testing of Mar 2009 electric immersion water heaters

3 SP 50 : 1991 Guide for requirements and testing of electric radiators Mar 2009

4 SP 51 : 1991 Guide for requirements and testing of electric stoves Mar 2009

5 IS 302(Part 1):2008 Safety of household and similar electrical | IEC 60335-1(2006) appliances: Part 1 General requirements (sixth revision) 6 IS 302(Part 2/Sec 2):1997 Safety of household and similar electrical Mar 2009 1 | IEC 60335-2-2(1993) appliances: Part 2 Particular requirements, Section 2 Vacuum cleaners

7 IS 302(Part 2/Sec 3):2007 Safety of household and similar electric | IEC 60335-2-3(2002) appliances: Part 2 Particular requirements, Sec 3 Electric iron (first revision)

8 IS 302(Part 2/Sec 4):1993 Safety of household and similar electrical Mar 2009 1 | IEC 60335-2-4(1984) appliances: Part 2 Particular requirements, Section 4 Spin extractors

9 IS 302(Part 2/Sec 6):2009 Safety of household and similar electrical | IEC 60335-2-6(1986) appliances: Part 2 Particuar requirements, Section 6 Cooking ranges, cooking tables, ovens and similar appliances (first revision)

10 IS 302(Part 2/Sec 7):2009 Safety of household and similar electrical Mar 2009 2 | IEC 60335-2-7(1984) appliances: Part 2 Particular requirements, Section 7 Domestic electric clothes washing machines

11 IS 302(Part 2/Sec 8):1994 Safety of household and similar electrical Mar 2009 1 | IEC 60335-2-8(1987) appliances: Part 2 Particular requirements, Section 8 Electric shavers, hair clippers and similar applications

12 IS 302(Part 2/Sec 9):2009 Safety of household and similar electrical | IEC 60335-2-9(1986) appliances: Part 2 Particular requirements: Section 9 Electric toasters, grills, roastors and similar appliances (first revision)

13 IS 302(Part 2/Sec 11):1994 Safety of household and similar electrical Mar 2009 1 | IEC 60335-2-11(1976) appliances: Part 2 Particular requirements, Section 11 Tumbler dryers

14 IS 302(Part 2/Sec 12):1993 Safety of household and similar electrical Mar 2009 1 | IEC60335-2-12(1987) appliances: Part 2 Particular requirements, Section 12 Warming plates and similar appliances


93

15 IS 302(Part 2/Sec 13):1994 Safety of household and similar electrical Mar 2009 1 | IEC 60335-2-13(1987) appliances :Part 2 particular requirements, Section 13 Frying pans, deep fat fryers and similar appliances

16 IS 302(Part 2/Sec 14):2009 Safety of household and similar electrical | IEC 60335-2-14(1984) appliances: Part 2 Particular requirements, Section 14 Electric kitchen machines (first revision)

17 IS 302(Part 2/Sec 15):2009 Safety of household and similar electrical | IEC 60335-2-15(1986) appliances: Part 2 Particular requirements: Section 15 Appliances for heating liquids (first revision)

18 IS 302(Part 2/Sec 21):2011 Safety of household and similar electrical | IEC 60335-2-21(1989) appliances: Part 2 Particular requirements, Section 21 Stationary storage type electric water heater (first revision)

19 IS 302(Part 2/Sec 23):2009 Safety of household and similar electrical | IEC 60335-2-23(1986) appliances: Part 2 Particular requirements, Section 23 Appliances for skin and hair care (first revision)

20 IS 302(Part 2/Sec 24):1994 Safety of household and similar electrical Mar 2009 | IEC 60335-2-24(1992) appliances: Part 2 Particular requirements, Sec 24 Refrigerators, food freezers and ice makers

21 IS 302(Part 2/Sec 25):1994 Safety of household and similar electrical Mar 2009 1 | IEC 60335-2-25(1988) appliances: Part 2 Particular requirements, Section 25 Microwave ovens

22 IS 302(Part 2/Sec 26):1994 Safety of household and similar electrical Mar 2009 1 | IEC 60335-2-26(1994) appliances: Part 2 Particular requirements, Section 26 Clocks 23 IS 302(Part 2/Sec 30):2007 Safety of household and similar electrical | IEC 60335-2-30(2002) appliances: Part 2 Particular requirements, Section 30 Room heaters (first revision)

24 IS 302(Part 2/Sec 31):2009 Safety of household and similar electrical | IEC 60335-2-31 2002) appliances: Part 2 Particular requirements, Section 31 Range Hoods

25 IS 302(Part 2/Sec 32):1994 Safety of household and similar electrical Mar 2009 1 | IEC 60335-2-32(1993) appliances: Part 2 Particular requirements: Section 32 Massage appliances

26 IS 302(Part 2/Sec 35):2011 Safety of household and similar electrical | IEC 60335-2-35(1991) appliances: Part 2 Particular requirements, Section 35 Electric instantaneous water heater(first revision)

27 IS 302(Part 2/Sec 45):1994 Safety of household and similar electrical Mar 2009 1 | IEC 60335-2-45(1986) appliances: Part 2 Particular requirements, Sec 45 Electric heating tools

28 IS 302(Part 2/Sec 46):1993 Safety of household and similar electrical Mar 2009 | IEC 60335-2-46(1986) appliances: Part 2 Particular requirements, Section 46 Electric steam cookers

29 IS 302(Part 2/Sec 59):1999 Safety of household and similar electrical Mar 2009 | IEC 60335-2-59(1990) appliances : Part 2 Particular requirements, Sec 59 Insect killers 30 IS 302(Part 2/Sec 76):1999 Safety of household and similar electrical Mar 2009 | IEC 60335-2-76(1997) appliances Part 2 Particular requirements, Section 76 Electric fence energizers * INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS

94

31 IS 302(Part 2/Sec 201):2008 Safety of household and similar electrical | IEC 60335-2-74(2002) appliances: Part 2 Particular requirements, Section 201 Electric immersion water heaters (first revision)

32 IS 302(Part 2/Sec 202):1992 Safety of household and similar electrical Mar 2009 2 appliances: Part 2 Particular requirements, Section 202 Electric stoves

33 IS 302(Part 2/Sec 203):1994 Safety of household and similar electrical Mar 2009 1 appliances: Part 2 Particular requirements: Section 203 Electric call bells and buzzers for indoor use

34 IS 302(Part 2/Sec 204):1994 Safety of household and similar electrical Mar 2009 1 appliances: Part 2 Particular requirements: Section 204 Electric water boilers

35 IS 302(Part 2/Sec 206):1994 Safety of household and similar electrical Mar 2009 1 appliances: Part 2 Particular requirements: Section 206 Electric coffee machines

36 IS 302(Part 2/Sec 207):1994 Safety of household and similar electrical Mar 2009 1 appliances: Part 2 Particular requirements, Sec 207 Electric hot plates

37 IS 302(Part 2/Sec 208):1994 Safety of household and similar electrical Mar 2009 1 appliances: Part 2 Particular requirements, Sec 208 Single walled baking ovens

38 IS 302(Part 2/Sec 209):1996 Safety of household and similar electrical Jul 2010 2 appliance: Part 2 Particular requirements , Section 209 Portable low speed food grinding machines

39 IS 302(Part 2/Sec 80):2003 Safety of household and similar electrical Sep 2008 | IEC 60335-2-80 appliances: Part 2 Particular requirements, Section 80 Fans(Superseding IS 12155:1967)

40 IS 365:1983 Electric hot plates (second revision) Mar 2009 3 | IEC 60302-2-6(1982) 41 * IS 366:1991 Electric irons (fourth revision) Apr 2008 6 | IEC 60311(1988) 42 IS 367:1993 Electric kettles and jugs for household Mar 2009 | IEC 60530(1975) and similar use (fourth revision) 43 * IS 368:1992 Electric immersion water heaters (fourth revision) Mar 2009 1

44 * IS 369:1992 Electric radiators (third revision) Feb 2011 2 | IEC 60675 45 * IS 374:1979 Electric ceiling type fans and regulators (third revision) Sep 2010 6

46 * IS 555:1979 Electric table type fans and regulators (third revision) Jul 2010 2

47 IS 959:1994 Electric soldering irons (second revision) Mar 2009


95

48 * IS 1169:1967 Electric pedestal type fans and regulators (first revision) Mar 2009 6

49 IS 1287:1993 Electric toasters (third revision) Mar 2009 | IEC 60442(1973) 50 IS 1401:2008 Protection of persons and equipment by / IEC 61032 : 1997 enclosures - Probes for verification (second revision) 51 IS 1415:1966 Electric hand lamps (revised) Aug 2011 2

52 IS 1416:1972 Safety transformers (first revision) Aug 2011 3

53 * IS 2082:1993 Stationary storage type electric water heaters (third Nov 2009 5 | IEC 60379(1982) revision) 54 IS 2268:1994 Electric call bells and buzzers for indoor use Mar 2009 (second revision)

55 IS 2312:1967 Propeller type ac ventilating fans (first revision) Jul 2010 8 | IEC 60665(1981) 56 IS 2994:1992 Electric stoves (second revision) Mar 2009

57 IS 2997:1964 Air circulator type electric fans and regulators Jul 2010 8

58 IS 3017:1985 Thermostats for use with electric water heaters Aug 2011 5 | IEC 60730(1982) (first revision) 59 IS 3412:1994 Electric water boilers (second revision) Mar 2009

60 IS 3481:1966 Electric portable lamp stands and brackets Mar 2009 5

61 IS 3588:1987 Electric axial flow fans (first revision) Aug 2009 1

62 IS 3724:1966 Cartridge type heating elements (non-embedded type) Aug 2011 4

63 * IS 3725:1966 Resistance wires, tapes and strips for heating elements Jan 2011 3

64 IS 3963:1987 Roof extractor units (first revision) Aug 2009 1

65 IS 4158:1985 Solid embedded type electric heating elements Aug 2011 4 (first revision)

66 IS 4159:2002 Mineral filled sheathed heating elements Mar 2007 2 | IEC 60335-2-73(1994) (third revision) 67 IS 4165:1991 Thermostats for general purpose electric ovens Aug 2011 | IEC 60730(1982) (first revision) 68 IS 4250:1980 Domestic Electric food mixers (liquidizers and Dec 2009 9 grinders) and Centrifugal Juicers (first revision)


96

69 * IS 4283:1981 Hot air fans (first revision) Aug 2009 3

70 IS 4327:1967 Electric fans and regulators for use in ships Aug 2009 4

71 IS 4894:1987 Centrifugal fans (first revision) Aug 2009

72 IS 5159:1969 Mains-operated electric shavers Aug 2011 2

73 IS 5161:1969 Flexible electric heating pads for domestic use Aug 2011 4

74 IS 5579:1985 Neon testers (first revision) Aug 2011 1

75 IS 5790:1985 Domestic electric cooking ovens (first revision) Sep 2009 3 | IEC 60350 76 IS 6272:1987 Industrial cooling fans (man coolers) (first revision) Aug 2009 2

77 IS 6290:1986 Steam irons (first revision) Aug 2011 5 | IEC 60311(1970) 78 IS 6365:1971 Laboratory electric ovens Aug 2011 5

79 IS 6390(Part 2):1992 Domestic electrical clothes washing machines: Mar 2009 Part 2 Requirements for tumbler dryers

80 IS 6446:1986 Mica insulated heating elements (first revision) Dec 2009 5

81 IS 6680:1992 Railway carriage fans (first revision) Aug 2009 | IEC 60342-1 82 IS 7137:1973 Portable, hand held mains-operated electric massagers Aug 2011 2

83 IS 7154:1994 Mains-operated electric hair-dryers (first revision) Mar 2009 1

84 IS 7603:1975 Low speed food grinding machines Jul 2010 3

85 IS 8506:1977 Laboratory electric resistance furnaces Aug 2011

86 * IS 8978:1992 Electric instantaneous water heaters (second revision) Dec 2009 2

87 IS 8985:1978 Single walled baking ovens Aug 2011 1

88 IS 10436:1983 Electric frying pans and deep fat fryers Apr 2008 2 | IEC 60335-2-13 89 IS 10975:1984 Electric gas lighters Aug 2011 1


97

90 IS 11676:1995 Microwave ovens for household and similar purposes Aug 2011 | IEC 60705(1988) 91 IS 11879:1986 Electric steam cookers Aug 2011 2

92 IS 12289:1988 Hand held electric engraving tools Mar 2009 | IEC 60745-1 93 IS 13231:1991 Warming plates Aug 2011

94 IS 13368:1992 Method of test for double inlet Aug 2009 centrifugal fans (industrial type)

95 IS 13588:1993 Spring operated impact test apparatus and calibration Mar 2009 / IEC 60817(1984) 96 IS 13886:1993 Bimetallic thermostats and thermal Mar 2009 | IEC 60730(1892) cutouts for use with electric irons 97 IS 14144:1994 Electric coffee makers Mar 2009 1 | IEC 60661(1980) (Superseding IS 3514) 98 IS 14145:1994 Mains operated clocks Apr 2008 (superseding IS 5160)

99 IS 14155:1994 Domestic electric clothes washing machines Mar 2009 1 | IEC 60456(1974) for domestic use [Superseding IS 6390(Part 1):1983

100 IS 15644:2006 Safety of electric toys Aug 2011 / IEC 62115(2003) 101 IS 60730(Part 1):1999 Automatic electrical controls for household and / IEC 60730-1 : 1999 similar use: Part 1 General requirements


1 DOC.ETD 32(5891) Propeller type ac ventilating fans - Specification (second revision of IS 2312)

2 DOC.ETD 32(5892) Specification for air circulator type electric fans regulators (first revision of IS 2997)

3 DOC.ETD 32(5893) Electric fans and regulators for use in ships- Spec ification (first revision of IS 4327)

4 DOC.ETD 32(6116) Cartridge type heating elements (non-embedded type) - Specification (first revision of IS 3724)

5 DOC.ETD 32(6325) Automatic electric controls for household and similar use Part 2 Particular requirements for temperature sensing controls 6 DOC.ETD 32(6333) Draft Indian Standard For Electric Instantaneous Water Heaters (Third Revision of IS 8978)


98

DRAFT STANDARDS APPROVED FOR WIDE CIRCULATION

1 DOC.ETD 32(5432) Electric pedestal type fans and regulators (second revision of IS 1169)

2 DOC.ETD 32(5433) Electric table type fans and regulators (fourth revision of IS 555)

3 DOC.ETD 32(6130) Safety of household and similar electrical appliances: Part 2 Particular requirements: Section 25 Microwave ovens including Combination Microwave Ovens (first revision of IS 302-2-25)


1 DOC.ETD 32(5996) Specification for Table wall, Pedestal type fans and Regulators

2 DOC.ETD 32(6408) Household and similar electrical appliances : Part 1 General requirements (IEC 60335-1)

3 DOC.ETD 32(6442) Electric immersion water heaters (fifth revision of IS 368) 4 DOC.ETD 32(6477) Household electric direct acting room heaters – Performance requirements (fourth revision of IS 369) * INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS

99

ETD 33 WINDING WIRES SCOPE To prepare standards for wires for electrical winding irrrespective of conductor material, shape or type of covering taking into account the needs in the fields of electrotechnology


STANDARDS PUBLISHED

1 IS 482:1981 Reels for covered round electrical winding wires Feb 2010 (third revision)

2 IS 2069:1991 Drums for covered winding wires and strips for Feb 2010 electrical purpose (second revision)

3 IS 4685(Part 1):1968 Varnish bonded glass-fibre covered copper Feb 2010 1 conductors: Part 1 Round wires

4 IS 5825:1993 Test procedure for the determination of the Jun 2008 / IEC 60172(1987) temperature index of enamelled winding wires (first revision)

5 IS 6162(Part 1):1971 Paper covered aluminium conductors : Part 1 Jun 2008 4 | IEC 60111 Round conductors 6 IS 6162(Part 2):1971 Paper covered aluminium conductors:Part 2 Jun 2008 5 | IEC 60111 Rectangular conductors 7 IS 6181:1971 Varnish bonded glass-fibre braided rectangular Jun 2008 1 copper conductors

8 IS 7391(Part 1):1974 Cotton covered copper conductors : Part 1 Round Jun 2008 2 | IEC 60182 conductors 9 IS 7391(Part 2):1974 Cotton covered copper conductors : Part 2 Jun 2008 Rectangular conductors (superseeding IS:2068)

10 IS 7404(Part 1):1991 Paper covered copper conductors : Part 1 Round Feb 2010 conductors [superseeding IS:3454) (first revision)

11 IS 7576:1974 Bunched enamelled copper conductors with silk Jun 2008 | IEC 60317-1 covering 12 IS 8572:1993 Paper covered flexible/stranded copper conductors Jun 2008 for transformer leads (first revision)

13 IS 8783(Part 1):1995 Winding wires for submersible motors Part 1: Feb 2010 1 Conductor data (first revision)

14 IS 8783(Part 2):1995 Winding wires for submersible motors Part 2: Feb 2010 1 Materials for dielectric and jacket (first revision)

15 IS 8783(Part 3):1995 Winding wires for submersible motors Part 3: Feb 2010 2 Methods of tests (first revision)

16 IS 8783(Part 4/Sec 1):1995 Winding wires for submersible motors Part 4: Feb 2010 1 Specifications for individual wires, Section 1 HR PVC insulated wires (first revision)


100

17 IS 8783(Part 4/Sec 2):1995 Winding wires for submersible motors Part 4: Feb 2010 Specifications for individual wires Section 2 Crosslinked polyethylene insulated and polyamide jacketed wires (first revision)

18 IS 8783(Part 4/Sec 3):1995 Winding wires for submersible motors Part 4: Feb 2010 1 Specifications for individual wires, Section 3 Polyester and polypropylene insulated winding wires (first revision)

19 IS 9148:1979 Tape wrapped rectangular and square copper wires Feb 2010 1 with a temperature index of 220

20 IS 9778:1981 Guide for evaluation of thermal endurance of Feb 2010 1 varnish bonded glass-fibre covered rectangular copper conductors

21 IS 10031:1981 Taper barrelled delivery spools for covered round Feb 2010 | IEC 60264-3(1973) electrical winding wires 22 IS 11174:1984 Aromatic polyamide paper covered rectangular and Feb 2010 square copper wires with temperature index 200

23 IS 11184:1984 Enamelled and varnish bonded glass fibre covered Feb 2010 1 round copper wires

24 IS 11395:1985 Tape wrapped round copper wires with temperature Feb 2010 index of 220

25 IS 11597:1986 Polyester tape wrapped, varnish bonded glass-fibre Feb 2010 covered rectangular paper conductors

26 IS 13343:1992 Guide for evaluation of thermal endurance of Aug 2008 enamelled and varnish bonded glass covered copper conductors

27 *IS 13730(Part 0/Sec 1):1993 Specifications for particular types of winding wires: Jun 2008 / IEC 60317-0-1 Part 0 General requirements, Section 1 Enamelled round copper wire

28 IS 13730(Part 0/Sec 2):2011 Specifications for particular types of winding wires: / IEC 60317-0-2:2005 Part 0 General requirements, Section 2 Enamelled rectangular copper wire (first revision)

29 *IS 13730(Part 0/Sec 3):1994 Specifications for particular typses of winding Feb 2010 wires: Part 0 General requirements, Section 3 Enamelled round aluminium wire

30 IS 13730(Part 0/Sec 4):2011 Specifications for particular types of winding / IEC 60317-0-4:2006 wires: Part 0 General requirements, Section 4 Glass fibre wound resin of varnish impregnated bare or enamelled rectangular copper wire (First

31 IS 13730(Part 0/Sec 5):2003 Specifications for particular types of winding wires: Mar 2008 / IEC 60317-0-5(2000) Part 0 General requirements, Section 5 glass fibre braided, bare or enamelled rectangular copper wire

32 IS 13730(Part 1):1993 Specifications for particular types of winding wires: Jun 2008 / IEC 60317-1(1990) Part 1 Polyvinyl acetal enamelled round copper wire, class 105 [superseeds IS 4800(Part 4):1968]

33 *IS 13730(Part 2):1996 Specifications for particular types of winding wires Dec 2011 / IEC 60317-2(1990) Part 2: Solderable polyurethane enamlled round copper wire, class 130, with a bonding layer. * INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS

101

34 *IS 13730(Part 3):1996 Specifications for particular types of winding wires Dec 2011 / IEC 60317-3(1990) Part 3 polyester enamelled round copper wire, 35 IS 13730(Part 4):1993 Specifications for particular types of winding wires: Jun 2008 / IEC 60317-4(1990) Part 4 Solderable polyurethane enamelled round copper wire, class 130 [Superseeds IS 4800(Part 6):1968]

36 IS 13730(Part 6):1994 Specifications for particular types of winding wires Feb 2010 : Part 6 Oleo-resinous enamelled round aluminium wire, Class 180 [Superseeds IS 4800(Part 7):1970]

37 IS 13730(Part 7):1993 Specifications for particular types of winding Jun 2008 / IEC 60317-7(1990) wiresC Part 7 Polyimide enamelled round copper wire Class 220 [superseeds IS 4800(Part 11):1981]

38 IS 13730(Part 8):1996 Specifications for particular types of winding wires: Dec 2006 / IEC 60317-8(1990) Part 8 polyesterimide enamelled round copper wire class 180

39 IS 13730(Part 9):1994 Specifications for particular types of winding wires Feb 2010 :Part 09 Polyester enamelled round aluminium wire, Class 130

40 IS 13730(Part 13):1993 Specifications for particular types of winding wires: Jun 2008 / IEC 60317-13(1990) Part 13 Polyester or polyesterimide overcoated with polyamide-imide enamelled round copper wire, Class 200

41 IS 13730(Part 15):1994 Specifications for particular types of winding wires Feb 2010 : Part 15 Polyesterimide enamelled round aluminium wire, Class 180

42 IS 13730(Part 16):1996 Specifications for particular types of winding wires: Dec 2011 / IEC 60317-16 (1990) Part 16 Polyester enamelled rectangular copper wire, Class 155

43 IS 13730(Part 17):1996 Specifications for particular types of winding wires: Dec 2011 / IEC 60317-17 (1990) Part 17 Polyvinyl acetal enamelled rectangular copper wire, Class 105

44 IS 13730(Part 20):1993 Specifications for particular types of winding wires: Jun 2008 / IEC 60317-20(1990) Part 20 Solderable polyurethane enamelled round copper wire, Class 155

45 IS 13730(Part 26):1996 Specifications for particular types of winding wires: Jun 2008 / IEC 60317-26 (1990) Part 26 Polyamide-imide enamelled round copper wire, Class 200

46 IS 13730(Part 27):1997 Specifications for particular types of winding wires: Jun 2008 / IEC 60317-27(1990) Part 27 Paper covered rectangular copper wire 47 IS 13730(Part 28):1997 Specifications for particular types of winding wires: Jun 2008 / IEC 60317-28(1990) Part 28 Polyesterimide enamelled rectangular copper wire, Class 180

48 IS 13730(Part 29):1996 Specifications for particular types of winding wires: Jun 2008 / IEC 60317-29(1990) Part 29 Polyester or polyesterimide overcoated with polyamide-imide enamelled rectangular copper wire, Class 200

49 IS 13730(Part 31):1997 Specifications for particular types of winding wires: Jun 2008 / IEC 60317-31(1990) Part 31 Glass-fibre wound, polyester or polyesterimide varnish- treated, bare or enamelled rectangular copper wire, temperature index 180 * INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS

102

50 IS 13730(Part 32):1997 Specifications for particular types of winding wires: Jun 2008 / IEC 60317-32(1990) Part 32 Glass-fibre wound, polyester or polyesterimide varnish-treated, bare or enamelled rectangular copper wire, temperature index 155

51 IS 13730(Part 33):1997 Specifications for particular types of winding Jun 2008 / IEC 60317-33 (1990) wieres: Part 33 Glass-fibre wound, silicone varnish-treated bare or enamelled rectangular copper wire, temperature index 200

52 IS 13730(Part 34):2000 Specifications for particular types of winding wires: Feb 2010 / IEC 60317-34(1997) Part 34 Polyester enamelled round copper wire, Class 130 (first revision)

53 IS 13730(Part 39):2005 Specifications for particular types of wires: Part 39 Oct 2010 / IEC 60317-39:1992 Glass-fibre braided polyester or polyesterimide varnish-treated, bare or enamelled rectrangular copper wire, temperature index 180

54 IS 13730(Part 43):2005 Specifications for particular types of wires: Part 43 Oct 2010 / IEC 60317-43:1997 Aromatic polyimide tape wrapped round copper wire, class 240

55 IS 13730(Part 44):2005 Specifications for particular types of wires: Part Nov 2010 / IEC 60317-44:1997 44 Aromatic polyimide tape rapped rectangular copper wire, class 240

56 IS 13730(Part 45):1999 Specifications for particular type of winding wires : Mar 2009 Part 45 Polyester enamelled round copper wire ,

57 IS 13730(Part 48):2005 Specifications for particular types of wires: Part Oct 2010 / IEC 60317-48:1999 48 Glass fibre wound resin or varnish impregnated bare or enamelled round copper wire, temperature

58 IS 13730(Part 49):2005 Specifications for particular types of wires: Part 49 Oct 2010 / IEC 60317-49:1999 Glass fibre wound resin or varnish impregnated bare or enamelled round copper wire, temperature

59 IS 13730(Part 50):2005 Specifications for particular types of wires: Part 50 Oct 2010 / IEC 60317-50:1999 Glass fibre wound resin or varnish impregnated bare or enamelled round copper wire, temperature

60 IS 13730(Part 53):2005 Specifications for particular types of wires: Part 53 Oct 2010 / IEC 60317-53:1999 Aromatic polyamide (aramid ) tape wrapped rectangular copper wire, temperature index 220

61 IS 13778(Part 1):1993 Methods of tests for winding wires: Part 1 General Jun 2008 1 / IEC 60851-1:1985 62 IS 13778(Part 2):1993 Methods of tests for winding wires: Part 2 Jun 2008 / IEC 60851-2:1985 Determination of dimensions 63 IS 13778(Part 3):1993 Methods of tests for winding wires: Part 3 Jun 2008 2 / IEC 60851-3(1985) Mechanical properties 64 IS 13778(Part 4):1994 Methods of tests for winding wires: Part 4 Feb 2010 1 / IEC 60851-4:1985 Chemical properties 65 IS 13778(Part 5):1993 Methods of tests for winding wires: Part 5 Electrical Jun 2008 1 / IEC 60851-5(1985) properties 66 IS 13778(Part 6):2011 Methods of tests for winding wires: Part 6 Thermal / IEC 60851-6:1985 properties (first revision) * INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS

103

67 IS 14841(Part 2/Sec 1):2000 Packaging of winding wires: Part 2 Cylindrical Feb 2010 / IEC 60264-2-1:1989 barrelled delivery spools Section 1 Basic dimensions 68 IS 14841(Part 2/Sec 2):2000 Packaging of winding wires: Part 2 Cylindrical Feb 2010 / IEC 60264-2-2:1990 barrelled delivery spools, Section 2 Specification for returnable spools made from thermoplastic

69 IS 14841(Part 3/Sec 1):2000 Packaging of winding wires: Part 3 Taper barrelled Feb 2010 / IEC 60264-3-1:1999 delivery spools, Section 1 basic dimensions 70 IS 14841(Part 3/Sec 2):2000 Packaging of winding wires: Part 3 Taper barrelled Feb 2010 / IEC 60264-3-2:1999 delivery spools, Section 2 Specification for returnable spools made from thermoplastic material

71 IS 14841(Part 3/Sec 3):2000 Packaging of winding wires: Part 3 Taper barrelled Feb 2010 / IEC 60264-3-3:1990 delivery spools, Section 3 Specification for non- returnable spools made from thermoplastic material

72 IS 14841(Part 3/Sec 4):2000 Packaging of winding wires: Part 3 Taper barrelled Feb 2010 / IEC 60264-3-4:1999 delivery spools, Section 4 basic dimensions of containers for taper barrelled delivery spools

73 IS 14841(Part 4/Sec 1):2000 Packaging of winding wires: Part 4 Methods of test, Feb 2010 / IEC 60264-4-1:1997 Section 1 Delivery spools made from thermoplastic material


1 DOC.ETD 33(6066) Winding Wires Test methods Part 1: General (IEC 60851-1)

2 DOC.ETD 33(6068) Specifications for particular types of winding wires: Part 0 General requirements, Section 3 Enamelled round aluminium wire (First Revision)(IEC 60317-0-3:2004)

3 DOC.ETD 33(6154) Specification for particular types or winding wires - Part 0-1: General requirement - Enamelled round copper wire IEC 60317-0-1

4 DOC.ETD 33(6157) Specifications for particular types of winding wires part 0-5: General requirments - Glass fibre braided, resin or varnish impregnated, bare or enamelled rectangular copper wire IEC 60317-0-5

5 DOC.ETD 33(6158) Specifications for particulatar types of winding wires Part 0-6: General requirements Glass-fibre wound resin or varnish impregnated,bare or enamelled round copper wire IEC 60317-0-6

6 DOC.ETD 33(6215) Specification for particulars types of winding wires – Part 2: Solderable polyurethane enamelled round copper wire, class 130, with a bounding layer (first revision) [ IEC 60317-2:2000]

7 DOC.ETD 33(6216) Specification for particulars types of winding wires – Part 3: Polyester enamelled round copper wire, class 155 (firstr revision) [IEC 60317-3:2004] * INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS

104

8 DOC.ETD 33(6247) Specifications for particular types of winding wires Part 0-3: General requirements – Enamelled round aluminium wire [First Revision of IS 13730 (Part 0/Sec 3):1994] IEC 60317-0-5:2008]

9 DOC.ETD 33(6248) Winding wires – Test methods - Part 3: Mechanical properties [First Revision of IS 13778 (Part 3):1993] IEC 60851-3:2009]

10 DOC.ETD 33(6249) Winding wires – Test methods - Part 5: Electrical properties [First Revision of IS 13778 (Part 5):1993] [IEC 60851-5:2008]

11 DOC.ETD 33(6250) Specifications for particular types of winding wires Part 12: Polyvinyl acetal enamelled round copper wire, class 120 [IEC 60317-12:2010]


1 DOC.ETD 33(6337) Winding Wires – Test methods – Part 2 : Determination of dimensions (First Revision)

2 DOC.ETD 33(6373) Packaging of winding wires – Part 3-1: Taper barrelled delivery spools – Basic dimensions

3 DOC.ETD 33(6374) Packaging of winding wires – Part 4-1: Methods of test – Delivery spools made from thermoplastic

4 DOC.ETD 33(6375) Specifications for particular types of winding wires – Part 3: Polyester enamelled round copper wire, class 155

5 DOC.ETD 33(6376) Specifications for particular types of winding wires – Part 4: Solderable polyurethane enamelled round copper wire, class 130

6 DOC.ETD 33(6377) Specifications for particular types of winding wires – Part 8: Polyesterimide enamelled round copper wire, class 180 * INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS

105

ETD 34 INSTRUMENTS TRANSFORMERS SCOPE To prepare standards and application guides for instrument Sl. No. IS Number/ DOC Number Title Reaffirm No. of Date Amd. STANDARDS PUBLISHED

1 IS 2705(Part 1):1992 Current transformers: Part 1 General requirements Aug 2007 1 | IEC 60185(1966) (second revision) 2 IS 2705(Part 2):1992 Current transformers: Part 2 Measuring current Aug 2007 | IEC 60185(1966) transformers (second revision) 3 IS 2705(Part 3):1992 Current transformers: Part 3 Protective current Aug 2007 | IEC 60185(1966) transformers (second revision) 4 IS 2705(Part 4):1992 Current transformers: Part 4 Protective current Aug 2007 | IEC 60185(1966) transformers for special purpose applications (second revision)

5 IS 3156(Part 1):1992 Voltage transformers: Part 1 General requirements Aug 2007 1 | IEC 60186(1987) (second revision) 6 IS 3156(Part 2):1992 Voltage transformers: Part 2 Measuring voltage Aug 2007 | IEC 60186(1987) transformers (second revision) 7 IS 3156(Part 3):1992 Voltage transformers: Part 3 Protective voltage Aug 2007 | IEC 60186(1987) transformers (second revision) 8 IS 3156(Part 4):1992 Voltage transformers: Part 4 Capacitor voltage Aug 2007 | IEC 60186(1987) transformers (second revision) 9 IS 4146:1983 Application guide for voltage transformers (first Sep 2006 revision)

10 IS 4201:1983 Application guide for current transformers (first Sep 2006 revision)

11 IS 5547:1983 Application guide for capacitor voltage Sep 2006 transformers (first revision)

12 IS 6949:1973 Summation current transformers Sep 2006

13 IS 11322:1985 Method for partial discharge measurement in Sep 2006 | IEC 44-4 (1980) instrument transformers FINALISED DRAFTS UNDER PRINT

1 DOC.ETD 34(6106) Instrument transformers: Part 1 Current

2 DOC.ETD 34(6107) Instrument transformers: Part 2 Inductive voltage transformers


106


1 DOC.ETD 34(6320) Instrument Transformers. Part 3 Combined / IEC 60040-3 (2002) Transformers 2 DOC.ETD 34(6321) Instrument Transformers. Part 5 Capacitor voltage / IEC 60040-5 (2004) Transformers 3 DOC.ETD 34(6322) Instrument Transformers. Part 6 : Requirements / IEC 60040-6 (2003) for protective current transformers 4 DOC.ETD 34(6323) Instrument Transformers. Part 7 Electronic / IEC 60040-7 (2002) Voltage Transformers 5 DOC.ETD 34(6324) Instrument Transformers.Part 8 Electronic Current / IEC 60040-8 (2002) Transformers * INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS

107

ETD 35 POWER SYSTEM RELAYS SCOPE To prepare standards for power systems relays including those incorporating solid state devices, also taking into account combination of relays and devices to form schemes for power systems including control equipment associated with that protection NOTE - Relays used in electronic equipment are excluded


1 IS 3231(Part 0):1986 Electrical relays for power system protection: Part Feb 2009 0 General introduction and list of parts (first

2 IS 3231(Part 1/Sec 1):1986 Electrical relays for power system protection: Part Sep 2011 1 General requirements, Section 1 Contact performance (first revision)

3 IS 3231(Part 1/Sec 2):1986 Electrical relays for power system protection: Part Sep 2011 1 General requirements, Section 2 Insulation tests (first revision)

4 IS 3231(Part 1/Sec 3):1986 Electrical relays for power system protection: Part Sep 2011 | IEC 255-4 (1976) 1 General requirements, Section 3 High frequency disturbance test for static relays (first revision)

5 IS 3231(Part 2/Sec 1):1987 Electrical relays for power system protection: Part Sep 2011 | IEC 255-1-00 2 Requirements for principal families, Section 1 All or nothing relays

6 IS 3231(Part 2/Sec 2):1987 Electrical relays for power system protection: Part Sep 2011 2 Requirements for principal families, Section 2 General requirements for measuring relays

7 IS 3231(Part 2/Sec 3):1987 Electrical relays for power system protection: Part Sep 2011 | IEC 255-8 (1978) 2 Requirements for principal families, Section 3 General requirements for thermal relays

8 IS 3231(Part 3/Sec 1):1987 Electrical relays for power system protection: Part Sep 2011 1 | IEC 255-3 (1971) 3 Requirements for particular group of relays, Section 1 Non-specified time or independent specified time measuring relays

9 IS 3231(Part 3/Sec 2):1987 Electrical relays for power system protection: Part Sep 2011 | IEC 255-4 (1976) 3 Requirements for particular group of relays, Section 2 Dependent specified time measuring

10 IS 3231(Part 3/Sec 3):1987 Electrical relays for power system protection:Part Sep 2011 | IEC 255-13(1980) 3 Requirements for particular group of relays, Section 3 Biased (percentage) differential relays

11 IS 3231(Part 3/Sec 4):1987 Electrical relays for power system protection: Part Sep 2011 | IEC 255-12 (1980) 3 Requirements for particular group of relays, Section 4 Directional relays and power relays

12 IS 3231(Part 3/Sec 5):1987 Electrical relays for power system Protection: Part Sep 2011 | IEC255-16 (1982) 3 Requirements for particular group of relays, Section 5 Impedance measuring relays

13 IS 3637:1966 Gas operated relays Sep 2011 1


108

14 IS 3638:1966 Application guide for gas operated relays Sep 2011 1

15 IS 3842(Part 1):1967 Application guide for electrical relays for ac Sep 2011 systems: Part 1


17 IS 3842(Part 3):1966 Application guide for electrical relays for ac Sep 2011 1 systems: Part 3 Phase unbalance relays including negative

18 IS 3842(Part 4):1966 Application guide for electrical relays for ac Sep 2011 1 systems: Part 4








26 IS 4483(Part 1):1968 Preferred panel cutout dimensions for electrical Sep 2011 relays: Part 1 Flush mounting IDMTL relays

27 IS 5834(Part 1):1994 Electrical timer relays for industrial purposes (Part Feb 2009 1) Pneumatic (first revision)

28 IS 5834(Part 2):1993 Electrical timer relays for industrial purposes (Part Apr 2008 1 2) Motorized (first revision)

29 IS 5834(Part 3):1981 Electrical timer relays for industrial purposes (Part Feb 2009 2 3) Electronic

30 IS 8686:1977 Static protective relays Sep 2011 | IEC 255-4 31 IS 8714:1978 Electrical protective relays for use in siesmic Sep 2011

32 IS 9124:1979 Guide for maintenance and field testing of Sep 2011 1 electrical relays

33 IS 9994:1981 Potential relays for capacitor start-capacitor run Sep 2011 hermetic compressors

34 IS 10075:1981 Start relay and overload protector for resistance Sep 2011 start induction run hermetic compressors


109

35 IS 12083(Part 1):1986 Electrical relays: Part 1 Contact performance Sep 2011 | IEC 255-0-20 (1974) 36 IS 12083(Part 2):1986 Electrical relays: Part 2 Insulation tests Sep 2011 | IEC 255-5 (1977) 37 IS 14122:1994 Built in thermal protection for electric motors rated Sep 2011 | IEC 60034-11(1978) up to 660 V ac 38 ISQC 160000 : 1988 Electrical relays:Part 1 tests and measurement Feb 2009 / IECQC 60255-7:1978 procedures for electromechanical all-or-nothing 39 ISQC 160000 : 1988 Electrical relays:Part 2 Applications of the IEC Feb 2009 / IECQC 60255-10:1979 quality assessment systems for electronic components to all-or-nothing relays

40 ISQC 160100 : 1988 Electrical relays, sectional specification: Feb 2009 / IECQC 160100:1983 Electromechanical all-or-nothing relays of assessed quality

41 ISQC 160101 : 1988 Electrical relays, blank detail specification: Feb 2009 / IECQC 160101:1993 electromechanical all-or-nothing relays of assessed quality, test schedules 1, 2 and 3 * INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS

110

ETD 36 TOOLS AND EQUIPMENTS FOR LIVE WORKING

SCOPE To prepare standard on electrical and mechanical characteriistics as well as reliability requirements for tools and eqipment used in connections with work on energized electrical systems


STANDARDS PUBLISHED 1 *IS 13770:1993 Insulating foam-filled tubes and solid rods for live Dec 2009 / IEC 60855:1985 working 2 *IS 13771:1993 Conductive clothing for live working at nominal Dec 2009 / IEC 60895:1987 voltage up to 800 kV ac 3 *IS 13772:1993 Hand tools for live working up to 1000 V ac and Dec 2009 1 / IEC 60900:1989 1500 V dc 4 IS 13773:1993 Sleeves of insulating material for live working Dec 2009 / IEC 60984:1990 5 *IS 13774:1993 Specification for gloves and mitts of insulating Dec 2009 / IEC 60903:1988 materials for live working 6 IS 13961:1994 Insulating poles (insulating sticks) and universal Dec 2009 / IEC 60832:1988 tool attachments (fittings) for live working 7 *IS 14956:2001 Live working - Minimum approach distances - Jun 2011 / IEC 61472:1998 method of calculation 8 IS 14957:2001 Aerial devices with insulating boom used for live Jun 2011 / IEC 61057:1991 working 9 IS 14981:2001 Live working - Earthing or earthing and short- Jun 2011 / IEC 61219:1993 circuiting equipment using lances as a short- circuiting device - lance earthing

10 IS 14993:2001 Saddles, pole clamps (stick clamps) and Jun 2011 / IEC 61236:1993 accessories for live working 11 *IS 14994:2001 Live working - Guidelines for quality assurance Jun 2011 / IEC 61318:1994 12 *IS 15405(Part 1):2003 Live Working - flame resistance materials for Nov 2008 / IEC 61482-1:2002 clothing for thermal protection of working thermal hazards of an electric arc Part 1 Test Methods

13 IS 15407:2003 Live working - Guidelines for dielectric testing of Nov 2008 / IEC 61278:1997 tools and equipment 14 IS 15416:2003 Live working - Terminology for tools equipments Dec 2008 / IEC 60743:2001 and devices (Superceding IS 13985) DRAFT STANDARDS ISSUED IN WIDE CIRCULATION

1 DOC.ETD 36(6392) Live Working - Insulating Foam-Filled Tubes and Solid Rods Part 1: Tubes and Rods of a Circular Cross-Section (first revision of IS 13370)


111

2 DOC.ETD 36(6393) Live Working - Conductive Clothing for use at Nominal Voltage Up to 800 Kv A.C. and +/- 600 Kv D.C. (first revision of IS 13371)

3 DOC.ETD 36(6394) Live Working - Hand Tools for use up to 1000 V A.C. and 1500 V D.C. (first revision of IS 13372)

4 DOC.ETD 36(6395) Live Working - Gloves of Insulating Material (first revision of IS 13374)

5 DOC.ETD 36(6396) Live Working - Minimum Approach Distances for a.c. Systems in the Voltage Range 72,5 Kv To 800 Kv - A Method of Calculation (first revision of IS

6 DOC.ETD 36(6397) Live Working - Conformity Assessment Applicable to Tools, Devices and Equipment (first revision of IS 14994)

7 DOC.ETD 36(6398) Live Working - Protective Clothing Against the Thermal Hazards of an Electric Arc - Part 1-1: Test Methods - Method 1: Determination of the Arc Rating (Atpv or Ebt50) of Flame Resistant Materials for Clothing (first revision of IS 15405)

8 DOC.ETD 36(6399) Live Working - Protective Clothing Against the Thermal Hazards of an Electric Arc - Part 1-2: Test Methods - Method 2: Determination of Arc Protection Class of Material and Clothing by using a Constrained and Directed Arc (Box Test) (first revision) * INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS

112

ETD 37 CONDUCTORS AND ACCESSORIES FOR OVERHEAD LINES SCOPE To prepare standards for conductors and accessories for overhead power lines and codes of practice for the design, installation and maintainance or overhead power lines


STANDARDS PUBLISHED

1 IS 398(Part 1):1996 Aluminium conductors for overhead transmission Sep 2007 1 | IEC 60889:1987 purposes: Part 1 Aluminium stranded conductors (third revision)

2 IS 398(Part 2):1996 Aluminium conductors for overhead transmission Sep 2007 3 | IEC 889 :1987 purposes: Part 2 Aluminium conductors, galvanized steel reinforced (third revision)

3 IS 398(Part 3):1976 Aluminium conductors for overhead transmission Jul 2009 3 purposes: Part 3 Aluminium conductors, aluminized steel reinforced (second revision)

4 IS 398(Part 4):1994 Aluminium conductors for overhead transmission Jul 2009 1 | IEC 60208:1966 purposes: Part 4 Aluminium alloy stranded conductors (aluminium magnesium silicon type)

5 IS 398(Part 5):1992 Aluminium conductors for overhead transmission Sep 2007 2 purposes: Part 5 Aluminium conductors, galvanized steel reinforced for extra high voltage (400 kV and above) (first revision)

6 IS 1778:1980 Reels and drums for bare conductors (first Jul 2009 1 revision) (superseding IS:2889)

7 IS 2121(Part 1):1981 Conductors and earth wire accessories for Sep 2007 overhead power lines: Part 1 Armour rods, binding wires and tapes for conductors (first revision)

8 IS 2121(Part 2):1981 Conductors and earth wire accessories for Sep 2007 overhead power lines: Part 2 Mid span joints and repair sleeves for conductors (first revision)

9 IS 2121(Part 3):1992 Conductors and earthwire accessories for Sep 2007 overhead power lines: Part 3 Accessories for earthwire (first revision)

10 IS 2121(Part 4):1991 Conductors and earth wire accessories for Sep 2007 overhead power lines : Part 4 Non-tension joints

11 IS 2532:1965 Hard-drawn copper wire for telegraph and telephone Sep 2007 purposes

12 IS 2665:1964 Cadmium-copper wire for telegraph and telephone Sep 2007 4 purposes

13 IS 3402:1965 Cadmium-copper conductors for overhead railway Sep 2007 1 traction

14 IS 3476:1986 Trolley and contact wire for electric traction (first Jul 2009 revision) * INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS

113

15 IS 5613(Part 1/Sec 1):1985 Code of practice for design, installation and Sep 2007 maintenance of overhead power lines: Part 1 Lines upto and including 11 kV, Section 1 Design (first revision)

16 IS 5613(Part 1/Sec 2):1989 Code of practice for design, installation and Sep 2007 maintenance of overhead power lines: Part 1 Lines upto and including 11 kV, Section 2 Installation and maintenance (first revision)

17 IS 5613(Part 2/Sec 1):1985 Code of practice for design, installation and Sep 2007 1 maintenance of overhead power lines: Part 2 Lines above 11 kV and upto and including 220 kV, Section 1 Design (first revision)

18 IS 5613(Part 2/Sec 2):1985 Code of practice for design, installation and Sep 2007 3 maintenance of overhead power lines: Part 2 Lines above 11 kV and upto and including 220 kV, Section 2 Installation and maintenance (first

19 IS 5613(Part 3/Sec 1):1989 Code of practice for design, installation and Jul 2009 1 maintenance of overhead power lines: Part 3 400 kV lines, Section 1 Design

20 IS 5613(Part 3/Sec 2):1989 Code of practice for design, installation and Jul 2009 maintenance of overhead power lines: Part 3 400 kV lines, Section 2 Installation and maintenance

21 IS 9511:1980 Earth knobs for neutral conductors Jul 2009

22 IS 9708:1993 Stockbridge vibration dampers for overhead power Mar 2009 lines (first revision)

23 IS 10162:1982 Spacers and spacer dampers for twin horizontal Sep 2007 1 bundle conductors

24 IS 12048:1987 Helically formed fittings for overhead lines upto 33 Sep 2007

25 IS 14214:1994 Annealed stranded copper conductors for electric Jul 2009 traction


1 DOC.ETD 37(5817) Specification for Steel Reels and Drums for Bare Conductor * INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS

114

ETD 39 FUSES SCOPE To prepare standards regarding specification for all types of fuses, with the object of determining : a) The characteristics which are essential in specifying the conditions for installation and operation of the fuses b) The requirements to be met by the fuses and the tests designed to ascertain their compliance with such requirements as well as the procedures to be followed for these tests c) Markings To prepare for these fuses standards, standard values of: 1) Characteristics, rated voltages, currents and breaking capacities: 2) Dimensions in connections with the fixing and interchangeability of high voltage and low voltage fuses


1 IS 2086:1993 Carriers and bases used in rewirable type electric Mar 2009 1 fuses for voltages upto 650 V(third revision) (Superseding IS 8724)

2 IS 8187:1976 D-type fuses Mar 2011 1 | IEC 269-3(1973) 3 IS 9385(Part 1):1979 High voltage fuses:Part 1 Current limiting fuses Sep 2007 | IEC 282-1(1979) 4 IS 9385(Part 2):1980 High voltage fuses:Part 2 Expulsion and similar Sep 2007 | IEC 282-2(1970) fuses (superseding IS:5792) 5 IS 9385(Part 3):1980 High voltage fuses:Part 3 Application guide for Sep 2007 | IEC 282-2(1970) high voltage fuses 6 IS 9385(Part 4):1983 High voltage fuses:Part 4 Determination of short- Sep 2007 circuit

7 IS 9385(Part 5):1983 High voltage fuses:Part 5 Types and dimensions Mar 2011 | IEC 282-1A(1978) of 8 IS 9402:1980 High voltage fuses for the external protection of Sep 2007 | IEC 549(1976) shunt power capacitors 9 IS 9926:1981 Fuse wires used in rewirable type electric fuses Mar 2011 upto 650 volts

10 IS 10624:1983 High voltage fuse-links for motor circuit applications Mar 2011 | IEC 644(1979) 11 IS 12534:1988 Application guide for the selection of high voltage Sep 2007 fuses for transformer circuit applications

12 IS 13703(Part 1):1993 Low voltage Fuses for voltages not exceeding Mar 2009 / IEC 60269-1(1986) 1000 V ac or 1500 V dc: Part 1 General requirements [superseding IS 9224 (Part 1):1979]

13 IS 13703(Part 2/Sec 1):1993 Low voltage fuses for voltages not exceeding Mar 2009 / IEC 60269-2(1986) 1000 V ac or 1500 V dc: Part 2 Fuses for use by authorized persons, Section 1 Supplementary requirements [superseding IS 9224 (Part 2):1979]


115

14 IS 13703(Part 2/Sec 2):1993 Low voltage fuses for voltages not exceeding Mar 2009 / IEC 60269-2-1(1987) 1000 V ac or 1500 V dc: Part 2 Fuses for use by authorized persons, Section 2 Examples of standardized fuses

15 IS 13703(Part 4):1993 Low voltage fuses for voltages not exceeding 1000 Mar 2009 / IEC 60269-4(1986) V ac or 1500 V dc: Part 4 Supplementary requirements for fuse- links for the protectlon of semiconductor devices [superceding IS 9224 (Part 4):1980]

16 IS 60127(Part 1):2006 Miniture fuses: Part 1 Definitions for miniature fuses and / IEC 60127-1(2006) general requirements for miniature fuse links(first revision) 17 IS 60127(Part 2):2003 Ministure fuses : Part 2 Cartridge fuse links (first revision) / IS/IEC 60127-2:2003 18 IS 60127(Part 4):2005 Miniature fuses: Part 4 Universal modular fuse / IEC 60127-4(2005) Link (UMF) 19 IS 60127(Part 5):1988 Miniature fuses: Part 5 Guidelines for quality assessment of miniature fuse-links

20 IS 60127(Part 6):1994 Miniature fuses: Part 6 Fuse holders for miniature Sep 2007 / IEC 60127-6:1994 cartridge fuse links 21 IS 60691:1993 Thermal links - requirements and application guide Sep 2007 / IEC 60691:1993 DRAFT STANDARDS FINALIZED BUT NOT YET UNDER PRINT

1 DOC.ETD 39(6164) High - voltage fuses - Part 2: Expulsion fuses IEC 60282-2 : 2008 (Superseding IS 9385 (Part 2) :1980


1 DOC.ETD 39(6159) Thermal links - Requirements and application guide IEC 60691:2002 (Superseding IS/IEC 691:1993) 2 DOC ETD 39(6428) Low-voltage fuses – Part 4: Supplementary requirements for fuse-links for the protection of semiconductor devices 3 DOC ETD 39 (6429) Low-voltage fuses – Part 5: Guidance for the application of low-voltage fuses 4 DOC ETD 39 (6430) Low-voltage fuses – Part 6: Supplementary requirements for fuse-links for the protection of solar photovoltaic energy systems 5 DOC ETD 39 (6431) High-voltage fuses – Part 1: Current-limiting fuses * INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS

116

ETD 40 HVDC POWER SYSTEMS SCOPE To prepare standards and guidelines on equipment and performance of high- voltage d.c(HVDC) Transmission Systems


STANDARDS PUBLISHED

1 IS 2165(Part 5):2005 Insulation coordination:Part 5 Procedures for high- Dec 2010 / IEC 60071-5:2002 voltage direct current (HVDC) converter stations 2 IS 14801:2000 Terminology for high voltage direct Jun 2010 / IEC 60633(1998) current ( HVDC ) transmission. 3 IS 14902(Part 1):2001 Performance of high-voltage d.c (HVDC) systems Jan 2011 / IEC 60919-1(1988) : Part 1 4 IS 14902(Part 2):2001 Performance of high-voltage d.c (HVDC) systems Jan 2011 / IEC 60919-2(1991) : Part 2 5 IS 14902(Part 3):2005 Performance of high -voltage direct current Dec 2010 / IEC 60919-3:1999 (HVDC) systems:Part 3 Dynamic conditions 6 IS 14911(Part 1):2001 Thyristor valves for high-voltage direct current Jan 2011 / IE 60700-1(1998) (HVDC) power transmission: Part 1 Electrial 7 IS 15597:2005 Determination of power losses in high voltage Dec 2010 / IEC 61803:1999 direct current (HVDC) converter stations 8 IS 15617:2005 Power electronics for electrical transmission and Dec 2010 / IEC 61954:2003 distribution systems-Testing of thyristor valves for static var compensations


1 DOC.ETD 40(6313) Performance of high-voltage direct current (HVDC) systems with line-commutated converters – Part 1: Steady-state conditions’ [First Revision of IS 14902 (Part 1)] IEC 60619-1(2010)

2 DOC.ETD 40(6314) Performance of high-voltage direct current (HVDC) systems with line-commutated converters – Part 2: Faults and switching [First Revision of IS 14902 (Part 2)] IEC 60619-2:2008

3 DOC.ETD 40(6315) Performance of high-voltage direct current (HVDC) Systems with line-commutated converters – Part 3: Dynamic conditions [First Revision of IS 14902 (Part 3)] IEC 60619-3:2009

4 DOC.ETD 40(6316) High-voltage direct current (HVDC) installations – system tests IEC 61975:2010

5 DOC.ETD 40(6317) High-voltage direct current (HVDC) systems – Guidebook to the specification and design evaluation of a.c. filters IEC 62001:2009 6 DOC.ETD 40(6318) Voltage sourced converter (VSC) Valves for high- voltage direct current (HVDC) Power transmission – electrical testing IEC 62501:2009 * INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS

117

ETD 42 WIND TURBINES SCOPE To prepare Indian standards for wind turbines that convert wind energy into electrical energy. These standards address design requirements, engineering integrity, measurement techniques and test procedures. Their purpose is to provide a basis for design, quality assurance and certification. The standards are concerned with all subsystems of wind turbines, such as mechanical and internal electrical systems, support structures and control and protection systems. They are intended to be used together with appropriate

Sl. No. IS Number/ DOC Number Title Reaffirm No. of Date Amd. DRAFT STANDARDS ISSUED IN WIDE CIRCULATION

1 DOC.ETD 42(6420) Wind turbines – Part 1: Design requirements (IEC 60014-1(2005)

2 DOC.ETD 42(6421) Wind turbines – Part 13: Measurement of mechanical loads IEC 60014-13:2001

3 DOC.ETD 42(6422) Wind turbines – Part 21: Measurement and assessment of power quality characteristics of grid connected wind turbines [IEC 61400-21:]

4 DOC.ETD 42(6423) Wind turbines – Part 24: Lightning protection [IEC 61400-24:]

5 DOC.ETD 42(6424) Electrotechnical Vocabulary – Part 415: Wind Turbine Generator Systems [IEC 60050-415:1999] * INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS

118

ETD 43 Standardization of environmental aspects for electrical and electronic SCOPE To prepare the necessary guidelines, basic standards, in the environmental area, in close cooperation with product committees, which remain autonomous in dealing with the environmental aspects relevant to their products; To liaise with product committees in the elaboration of environmental requirements of product standards in order to foster common technical approaches and solutions for similar problems and thus assure consistency in standards.

Sl. No. IS Number/ DOC Number Title Reaffirm No. of Date Amd. DRAFT STANDARDS ISSUED IN WIDE CIRCULATION

1 DOC.ETD 43(6326) Electrotechnical products – Determination of levels of six regulated substances (lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers) [IEC

2 DOC.ETD 43(6327) Environmentally conscious design for electrical and electronic products [IEC 62430(2009)]

3 DOC.ETD 43(6328) Guidance for evaluation of products with respect to substance-use restrictions in electrical and electronic products’ [IEC 62476(2010)]

4 DOC.ETD 43(6329) Environmental Information on Electrical and Electronic Equipment (EIEEE) [IEC/PAS

5 DOC.ETD 43(6330) Electrotechnical Products – Determination of Restricted Substances – Sampling Procedure – Guidelines [IEC/PAS 62596:2009] * INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS

119

ANNEX 1 STANDARDS WITHDRAWN / SUPERSEDED Sl. No. IS Number/ DOC Number Title

1 IS 13:1949 Methods for grading processed mica (tentative) (withdrawn) 2 IS 14:1949 Classification of processed muscovite mica (tentative) (withdrawn) 3 IS 203:1984 Dry batteries for flashlights (fourth revision) 4 IS 267:1976 Inert cells (third revision) 5 IS 268:1976 Leclanche type sack cells (second revision) 6 IS 282:1982 Hard-drawn copper conductors for overhead power transmission (second revision) 7 IS 302(Part 2/Sec Safety of household and similar electrical appliances: Part 2 205):1994 Particular requirements, Sec 205 Steam irons 8 IS 350:1968 Organic, baking, impregnating, insulating varnishes for electrical purposes (first revision) (with Amendments No. 1 to 3) 9 IS 351:1952 Insulated varnish, baking, bitumen type (with Amendments No. 1 and 2)- (withdrawn) 10 IS 352:1973 Air-drying insulating varnishes for electrical purposes (first revision )- (withdrawn) 11 IS 353:1952 Insulating varnish, non-alcoholic, clear, air-drying (withdrawn) 12 IS 370:1954 Reversible type two-pin plugs and socket-outlets without earthing connections (tentative) (withdrawn) 13 IS 375:1963 Marking and arrangement for switchgeasr bus-bars, main connections and auxiliary wiring (revised) (superseded by IS: 5578 and IS:11353) 14 IS 395:1962 Lead-acid storage battery for motor vehicles (superseded by IS: 15 IS 396:1953 Bare annealed high-conductivity copper wire for electrical machinery and apparatus (tentative) (withdrawn) 16 IS 434(Part 1):1964 Rubber-insulated cables: Part 1 With copper conductor (revised) (superseded by IS: 9968) 17 IS 434(Part 2):1964 Rubber-insulated cables: Part 2 With aluminium conductors (revised) (supersededby IS: 9968) 18 IS 449:1962 Enamelled high-conductivity annealed round copper wire (oleoresinous enamel) (revised) (withdrawn) 19 IS 450:1964 Cotton covered round copper conductors (revised) [superseded by IS 7391(Part 1)] 20 IS 541:1954 Stationary, accumulators, lead-acid type (superseded by IS: 1651 and IS: 1652) 21 IS 556:1960 Leclanche type radio batteries (withdrawn) 22 IS 585:1962 Voltages and frequency for transmission and distribution systems (revised) (Amendments No. 1 to 5) (superseded by IS:12360-1988) 23 IS 691:1984 Flexible trailing cables for use in coal mines (first revision) 24 IS 693:1965 Varnished cambric insulated cables (revised) (with Amendments No. 1 to 5) (withdrawn) 25 IS 722(Part 2):1977 AC electricity meters:Part 2 Single-phase whole-current watt hour meters, Class2 (first revision)

120

Sl. No. IS Number/ DOC Number Title

26 IS 722(Part 3):1988 AC electricity meters: Part 3 Three-phase whole current and transformer operated and single-phase transformer operated watthour meters, class 2(second revision)

27 IS 722(Part 5):1980 AC electricity meters: Part 5 Volt-ampere hour meters for restricted power factor range, class 3.5 (first revision) 28 IS 722(Part 6):1980 AC electricity meters: Part 6 Var-hour meters, class 2.5 (first 29 IS 722(Part 7/Sec AC electricity meters: Part 7 Volt-ampere hour meters for full power 1):1987 factor range, Section 1 General requirements (first revision) 30 IS 722(Part 7/Sec AC electricity meters: Part 7 Volt-ampere hour meters for full power 2):1987 factor range, Section 2 Vector sum VAh meters (first revision) 31 IS 722(Part 7/Sec AC electricity meters: Part 7 Volt-ampere hour meters for full power 3):1987 factor range, Section 3 Arithmatic sum VAh meters (first revision) 32 IS 722(Part 8):1972 AC electricity meters: Part 8 Single-phase 2-wire whole current watthour meter (class 1.0) 33 IS 722(Part 9):1972 AC electricity meters: Part 9 Three-phase whole current and transformer operated watthour meters and single-phase two-wire transformer operated watthour meters (class 1.0) 34 IS 985:1962 Lead-acid storage batteries for motor vehicles (special) (revised) (supersded by IS:7372) 35 IS 1025:1957 Glossary of terms for primary cells and batteries [superseded by IS: 1885 (Part15) 36 IS 1026:1984 Flexible trailing cables for use in quarries and metalliferous mines (first revision) 37 IS 1027:1968 Paper insulated cables for use in mines (superseded by IS: 692) 38 IS 1087:1957 Single pole 5-ampere tumbler switches for AC/DC (withdrawn) 39 IS 1119:1957 Reversible protected type two-pin plugs and sockets with earthing connections (withdrawn) 40 IS 1147:1957 Glossary of terms for secondary cells and batteries [superseded by IS: 1885 (Part 8)] 41 IS 1174:1957 Definitions for mica terms [superseded by IS:1885(Part 53)] 42 IS 1336:1959 Recommendations for the colour of push-buttons [superseded by IS: 6875 (Part 2)] 43 IS 1496:1959 Transformers used in vibrator power supplies (withdrawn) 44 IS 1565:1966 Electrical apparatus comprising resistors (revised) (superseded by IS:10659 andIS:11067) 45 IS 1567:1960 Metal-clad switches(current rating not exceeding 100 amperes); (superseded by IS:2607 and IS:4064) 46 IS 1591:1960 Glossary of terms for cables, conductors and accessories [superseded by IS:1885(Part 32)] 47 IS 1594:1960 Metric sizes of copper wires and conductors for electrical purposes (withdrawn) 48 IS 1595:1967 Enamelled round copper wire with high mechanical properties 49 IS 1596:1977 Polyethylene insulated cables for working voltages upto and including 1100 V (second revision) (withdrawn) 50 IS 1653:1972 Rigid steel conduits for electrical wiring (second revision) (withdrawn){Superseded by IS 9537(Part 2)}

121


51 IS 1666:1961 Paper-covered rectangular copper conductors for transformer windings [superseded by IS:7404(Part 2)] 52 IS 1753:1967 Aluminium conductors for insulated cables (first revision) (withdrawn) (see IS:8130) 53 IS 1777:1978 Industrial luminaires with metal reflectors (first revision) 54 IS 1818:1972 Alternating current isolators (disconnectors) and earthing swithces (first revision) (Amendments No. 1 and 2) (withdrawn) 55 IS 1822:1967 AC motor starters of voltage not exceeding 1000 volts [(first revision)- (withdrawn)] 56 IS 1846:1992 Lead-acid aircraft batteries (aerobatic and non-aerobatic) (first 57 IS 1860:1980 Code of Practice for installation, operation and maintennannce of electric passenger and goods lifts (first revision) 58 IS 1885(Part 8):1986 Electrotechnical vocabulary: Part 8 Secondary cells and batteries (first revision) (superseding 59 IS 1886:1961 Code of practice for installation and maintenance of transformers (first revision) [superseded by IS:10028(Part 2 and 3) 60 IS 1913(Part 1):1978 General and safety requirements for luminaires: Part 1 Tubular fluorescent lamps (second revision) 61 IS 1947:1980 Flood lights (first revision) (withdrawn) 62 IS 1951:1961 Polyvinylchloride sleeving for electrical purpose 63 IS 2032(Part 1):1962 Graphical symbols used in electrotechnology: Part 1 Classification and definitions of diagrams and charts [superseded by IS:8270(Part 64 IS 2032(Part 2):1962 Graphical symbols used in electrotechnology: Part 2 Kind of current distribution systems and methods of connection (withdrawn) 65 IS 2032(Part 3):1962 Graphical symbols used in electrotechnology: Part 3 Circuit elements and variability (withdrawn) 66 IS 2032(Part 4):1964 Graphical Symbols used in electrotechnolgy: Part 4 Rotating machines and transformers [superseded by IS 2032(Part 26) and IS 2032 (Part 28)] 67 IS 2032(Part 5):1965 Graphical symbols used in electrotechnology: Part 5 Generating stations and substations (withdrawn) 68 IS 2032(Part 6):1965 Graphical symbols used in electrotechnology: Part 6 Motor starters (withdrawn) 69 IS 2032(Part 7):1974 Graphical symbols used in electrotechnology: Part 7 Switchgear and auxiliaries(first revision) (withdrawn) 70 IS 2032(Part 10):1969 Graphical symbols used in electrotechnology: Part 10 Measuring instruments (withdrawn) 71 IS 2032(Part 11):1969 Graphical symbols used in electrotechnology: Part 11 Electrical installations in buildings (withdrawn) 72 IS 2032(Part 18):1976 Graphical symbols used in electrotechnology: Part 18 Symbols and connection diagrams for integrating meters (withdrawn) 73 IS 2032(Part 21):1977 Graphical symbols used in electrotechnology: Part 21 Electrical welding equipment (withdrawn) 74 IS 2032(Part 22):1978 Graphical symbols used in electrotechnology: Part 22 Instrument transformers (withdrawn) 75 IS 2032(Part 23):1978 Graphical symbols used in electrotechnology: Part 23 Instruments for process measurement and control (withdrawn)

122


76 IS 2032(Part 26):1982 Graphical symbols used in electrotechnology: Part 26 Rotating machines (withdrawn) 77 IS 2032(Part 27):1982 Graphical symbols used in electrotechnology: Part 27 Relays 78 IS 2032(Part 28):1983 Graphical symbols used in electrotechnology: Part 28 Transformers (withdrawn) 79 IS 2068:1962 Cotton covered rectangular copper conductors [superseded by IS: 7391 (Part 2)] 80 IS 2070:1962 Methods of impulse voltage testing (superseded by IS:2071) 81 IS 2071(Part 2):1974 Methods of high voltage testing: Part 2 Test procedures (first 82 IS 2120:1963 15-ampere tumbler switches (revised) (with amendments No. 1 and 2) (superseded by IS: 3854) 83 IS 2147:1962 Degrees of protection provided by enclosures for low voltage switchgear and controlgear [(superseded by IS 13947: (Part 1):1993]

84 IS 2148:2004 Electrical apparatus for explosive gas atmospheres - Flameproof enclosures "d" (third revision) 85 IS 2149:1970 Luminaires for street lighting (first revision) (withdrawn)[Superseded by IS 10322 (Part 5/Section 3)] 86 IS 2183:1973 Schedule for high pressure mercury vapour lamps (first revision) with Amendment No. 1) [superseded by IS:9900(Part 1) to (Part 4) 87 IS 2188:1962 Methods of test for paper for electrical purposes (withdrawn) 88 IS 2206(Part 1):1984 Flameproof electric lighting fittings: Part 1 Well-glass and bulkhead types (first revision) 89 IS 2206(Part 2):1976 Flameproof electric lighting fittings: Part 2 Fittings using glass tubes 90 IS 2206(Part 3):1989 Flameproof electric lighting fittings: Part 3 Fittings using plastic tubes (Group I only) 91 IS 2206(Part 4):1987 Flameproof electric lighting fittings: Part 4 Portable flameproof hand lamps 92 IS 2208:1962 HRC cartridge fuse links for voltage above 650 volts [(superseded by IS:9224(Part 2)] 93 IS 2274:1963 Code of practice for electrical wiring installations (system voltage exceeding 650 volts) (superseded by IS:732) 94 IS 2448(Part 2):1968 Adhesive insulating tapes for electrical purposes: Part 2 Tapes with PVC substrates (Amendment No.1 to 3)- (withdrawn) 95 IS 2493:1963 Well glass lighting fittings for use underground in mines (non- flameproof types)(withdrawn) 96 IS 2509:1973 Rigid non-metallic conduits for electrical installations (first revision) (withdrawn) (superseded by IS 9537(Part 3) 97 IS 2516(Part 1/Sec Circuit-breakers: Part 1 General and definitions, Section 2 For 2):1980 voltages above 1000V ac (first revision) (Superseded by IS 98 IS 2516(Part 1/Sec Circuit breakers: Part 1 General and definitions, Section 3 Voltages 3):1972 above 11 kV 99 IS 2516(Part 2/Sec Circuit breakers: Part 2 Rating, Section 2 For voltages above 1 000 2):1980 V ac (first revision) (Superseded by IS 13118:1991) 100 IS 2516(Part 3/Sec Circuit breakers : Part 3 Design and construction, Section 2 for 2):1980 Voltages above1 000 V ac (first revision) (Superseded by IS

123


101 IS 2516(Part 4/Sec Circuit breakers: Part 4 Type tests and routine tests, Section 2 For 2):1980 voltages above 1 000 V ac (first revision) (superseded by IS 102 IS 2516(Part 5/Sec Circuit breakers: Part 5 Information to be given with enquiries 2):1980 tenders and orders and rules for transport erection and maintenance, Section 2 For volages above 1 000 V ac (first revision) (superseded

103 IS 2516(Part 1&2/Sec Circuit breakers: Part 1 & 2 Requirements and tests: 1):1985 Section 1 Voltages not exceedding 1 000 V ac or 1 200 V dc (second revision) [superseded by IS 13947(Part 2):1993] 104 IS 2576:1975 Dry batteries for transistor radio receivers (first revision) 105 IS 2607:1967 Air-break isolators for voltages not exceeding 1 000 volts (first revision) (superseded by IS:4064)

106 IS 2659:1964 Enamelled round copper wire for elevated temperatures (withdrawn) 107 IS 2667:1988 Fittings for rigid steel conduits for electrical wiring (first revision) [Superseded by IS 14768(Part 2):2003] 108 IS 2834:1998 Shunt capacitors for power systems (second revision){uperseded by IS 13925(Part 1)} 109 IS 2889:1964 Drums for trolley and contact wire (withdrawn) 110 IS 2959:1985 Contactors for voltages not exceeding 1 000 V ac or 1 200 V dc (first revision) [superseded by IS 13947 (Part 4/Section 1)]

111 IS 2982:1965 Copper conductors in insulated cables and cords (withdrawn) (see 112 IS 3003(Part 1):1977 Carbon brushes for electrical machines: Part 1 Definitions and nomenclature (first revision) 113 IS 3003(Part 2):1977 Carbon brushes for electrical machines: Part 2 Test methods for brush materials(first revision) (superseded by IS 13584:1992) 114 IS 3003(Part 3):1978 Carbon brushes for electrical machines: Part 3 Dimensions and requirements (first revision) (Superseded by IS 13466:1992) 115 IS 3003(Part 4):1978 Carbon brushes for electrical machines: Part 4 Dimensions of chamfers, bevels and terminations (first revision) (Superseded by IS 116 IS 3035(Part 1):1965 Thermoplastic insulated weatherproof cables: Part 1 PVC insulated and PVC sheathed (amalgamated with IS:694) (withdrawn) 117 IS 3035(Part 2):1965 Thermoplastic insulated weatherproof cables: Part 2 Polyethylene insulated, taped or untaped, braided and compounded (withdrawn) 118 IS 3035(Part 3):1967 Thermoplastic insulated weatherproof cables: Part 3 Polyethlene sheathed (amalgamated with IS:1596) (withdrawn) 119 IS 3070(Part 1):1985 Lightning arresters for alternating current systems: Part 1 Non-linear resistor type lightning arresters (second revision){Superseded by IS 15086(Part 1)}

120 IS 3070(Part 2):1966 Expulsion type lightning arresters (Amendment No. 1) (withdrawn) 121 IS 3072:1975 Code of practice for installation and maintenance of switchgear[(first revision)-(withdrawn)] 122 IS 3106:1966 Code of practice for selection, installation maintenance of fuses [(voltage not exceeding 650 volts)- (withdrawn)] 123 IS 3107:1974 Portable multi purpose direct acting electrical indicating instruments (first revision) 124 IS 3202:1965 Code of practice for climate proofing of electrical equipment (withdrawn)

124


125 IS 3287:1965 Industrial lighting fittings with plastic reflectors 126 IS 3347(Part 6/Sec Dimensions for porcelain transformer bushings for use in lightly 1):1977 polluted atmospheres: Part 6 72.5 kV bushings, Section 1 Porcelain 127 IS 3347(Part 6/Sec Dimensions for porcelain transformer bushings for use in lightly 2):1982 polluted atmospheres: Part 6 72.5 kV bushings, Section 2 Metal 128 IS 3347(Part 7/Sec Dimensions for porcelain transformer bushings for use in lightly 1):1977 polluted atmospheres: Part 7 123 kV bushings, Section 1 Porcelain 129 IS 3347(Part 7/Sec Dimensions for porcelain transformer bushings for use in lightly 2):1982 polluted atmospheres: Part 7 123 kV bushings, Section 2 Metal parts 130 IS 3454:1966 Paper-covered round copper conductors [superseded by IS:7404 131 IS 3482:1966 Electric saucepans (withdrawn) 132 IS 3514:1966 Electric coffee percolators (non-regulator t ype) (Superseded by IS 14144:1994) 133 IS 3534:1976 Outline dimensions of electric lifts (first revision) 134 IS 3682:1966 Flameproof ac motors for use in mines 135 IS 3765:1966 Varnish impregnated cotton sleevings for electrical purposes 136 IS 3855(Part 1):1978 Rectangular and square enamelled copper conductors: Part 1 Thickness of enamel coating (first revision) 137 IS 3855(Part 2):1979 Rectngular and square enamelled copper condutors: Part 2 Methods of tests (first revision) 138 IS 3855(Part 3):1978 Rectangular and square enamelled copper conductors: Part 3 Wires with high mechanical properties (first revision) 139 IS 3855(Part 4):1981 Rectangular and square enamelled copper conductors: Part 4 Wires with temperature index 155 (first revision) 140 IS 3855(Part 5):1984 Rectangular and square enamelled copper conductors: Part 5 Wires with temperature index 180 (first revision) 141 IS 3914:1967 Code of practice for selection of ac induction motor starters [(voltage not exceding 1 000 volts- (withdrawn)] 142 IS 3961(Part 4):1968 Recommended current ratings for cables: Part 4 Polyethylene insulated cables 143 IS 4004:1985 Application guide for non-linear resistor type surge arresters for alternating current system (first revision) { Superseded by IS 15086(Part 5)} 144 IS 4012:1967 Dust-proof electric lighting fittings 145 IS 4013:1967 Dust-tight electric lighting fittings 146 IS 4047:1967 Heavy duty air-break switches and composite units of air-break switches and fuses for voltages not exceeding 1000 volts (superseded by IS:4064)

147 IS 4064(Part 1):1978 Air-break switches, air break disconnectors, air-break switch disconnectors andfuse-combination units for voltages not exceeding 1000V ac or 1200V dc: Part 1 General requirements (revised) [superseded by IS 13947 (Part 3):1993]

125


148 IS 4064(Part 2):1978 Air-break switches,air-break disconnectors,air-break switch disconnectors and fuse-combination units for voltages not exceeding 1000 V ac or 1200V dc: Part 2 Specific requirements for the direct switching of individual motors(withdrawn)

149 IS 4237:1982 General requirements for switchgear and controlgear for voltages not exceeding1 000 volts ac or 1 200 volts dc (first revision) [superseded by IS 13947(Part 1):1993] 150 IS 4268:1992 Air depolarized primary wet cells (second revision) 151 IS 4288:1988 PVC insulated (heavy duty) electric cables with solid aluminium conductors for voltages upto and including 1100 V (second revision) 152 IS 4615:1968 Switch- socket outlets (non-interlocking type)( Withdrawn) 153 IS 4666:1980 Electric passenger and goods lifts (first revision) 154 IS 4685(Part 2):1984 Varnish bonded glass-fibre covered copper conductors: Part 2 Rectangular conductors (first revision) 155 IS 4691:1985 Degrees of protection provided by enclosure for rotating electrical machines (first revision) (withdrawn) 156 IS 4710:1968 Switches and switch-isolators above 1000 V but not exceeding 11000 V (Amendment No. 1) (withdrawn) 157 IS 4718:1968 Multiple paper-covered round copper conductors [superseeds IS:7404 (Part 1)] 158 IS 4722:2001 Rotating electrical machines (second revision) (withdrawn) 159 IS 4728:1975 Terminal marking and direction of rotation for rotating electrical machinery (first revision) (withdrawn) 160 IS 4729:1975 Measurement and evaluation of vibration of rotating electrical machines (Superseded by IS 12075:1987)) 161 IS 4800(Part 1):1968 Enamelled round winding wires: Part 1 Conductors data 162 IS 4800(Part 2):1968 Enamelled round winding wires: Part 2 Maximum overall diameters 163 IS 4800(Part 3):1968 Enamelled round winding wires: Part 3 Methods of tests 164 IS 4800(Part 4):1968 Enamelled round winding wires: Part 4 Wires with high mechanical properties [superseeds IS 13730(Part 1):1993/IEC 317-1(1880)] 165 IS 4800(Part 5):1968 Enamelled round winding wires: Part 5 Wires for elevated temperatures (superseeding IS:2659) 166 IS 4800(Part 6):1968 Enamelled round winding wires: Part 6 Wires with self-fluxing properties [uperseeds IS 13730(Part 4):1993/IEC 317-4(1990)] 167 IS 4800(Part 7):1970 Enamelled round winding wires: Part 7 Wires with good dielectric properties under humid conditions [superseeds IS 13730(Part 6):1994] 168 IS 4800(Part 8):1970 Enamelled round winding wires: Part 8 Wires for use in refrigeration systems 169 IS 4800(Part 9):1971 Enamelled round winding wires: Part 9 Wires with temperature index 170 IS 4800(Part 10):1977 Enamelled round winding wires: Part 10 Self bonding wires 171 IS 4800(Part 11):1981 Enamelled round winding wires: Part 11 Wires with temperature index 220 [superseeds IS 13730(Part 7):1993/IEC 317-7(1990)] 172 IS 4800(Part 12):1986 Enamelled round winding wires; Part 12 Self bonding wires heat or solvent bonding enamelled round copper wires with temperature index 173 IS 4800(Part 13):1989 Enamelled round winding wires: Part 13 Dual coated wires with temperature index200

126


174 IS 4800(Part 14):1991 Enamelled round winding wires: Part 14 Wires with temperature index 155 [superseeded by IS 13730(Part 20):1993/IEC 317-20(1990)] 175 IS 4817:1968 Rubber-insulated cables for mines (with amendments No. 1 and 2) (withdrawn) 176 IS 4821:1968 Cable glands and cable sealing boxes for use in mines 177 IS 4850:1968 Application guide for expulsion-type lightning arresters (withdrawn) 178 IS 4949:1968 2 Amp switches for domestic and similar purposes(Superseded by IS 3854) 179 IS 5124:1969 Code of practice for installation and maintenance of ac induction motor starters [(voltage not exceeding 1 000 V)-(withdrawn)]

180 IS 5133(Part 1):1969 Boxes for enclosure of the electrical accessories:Part 1 Steel and cast iron boxes(Superseded by IS 14772) 181 IS 5133(Part 2):1969 Boxes for the enclosure of electrical accessories:Part 2 Boxes made of insulating material (Superseded by IS 14772) 182 IS 5160:1969 Mains-operated synchronous clocks (Superseded by IS 14145:1994) 183 IS 5424:1969 Rubber mats for electrical purpose (Superseded by IS 184 IS 5728:1970 Guide for short-circuit calculations (Superseded by IS 13234:1991) 185 IS 5755:1970 Mineral insulated aluminium sheathed cables with aluminium conductors (withdrawn) 186 IS 5780:2002 Electrical apparatus for explosive gas atmospheres - Intrinsic safety 'l' (second revision) 187 IS 5792:1970 High voltage expulsion and similar fuses (superseded by 188 IS 5833:1970 Flameproof air-break electrically operated gate-end boxes 189 IS 5908:1970 Method of measurement of electrical installations in buildings 190 IS 5959(Part 1):1970 Polyethylene insulated and PVC sheathed (heavy duty) electric cables (Part 1) For working voltages up to and including 1100 volts 191 IS 5959(Part 2):1970 Polythylene insulated and PVC sheathed (heavy duty) electric cables (Part 2) For working voltages from 3.3 kV up to and including 192 IS 5987:1970 Code of practice for selection of switches [(voltage not exceeding 1000 V)-(withdrawn)] 193 IS 6160:1971 Rectangular conductors for electrical machines 194 IS 6209:1982 Methods for partial discharge measurement (first revision) 195 IS 6381:2004 Electrical apparatus for explosive gas atmospheres - Increased safety "e" (first revision) 196 IS 6383:1971 Electric service lifts 197 IS 6390(Part 1):1983 Domestic electric clothes washing machines (first revision) (Superceded by IS 14155:1994) 198 IS 6390(Part 3):1992 Domestic electrical clothes washing machines: Part 3 Requirements for spin extractors (Superseded by IS 14155:1994) 199 IS 6474:1984 Polyethylene insulation and sheath of electric cables (first revision) 200 IS 6538:1971 Three-pin plugs made of resilient material (Withdrawn) 201 IS 6539:1972 Intrinsically safe magneto telephones for use in hazardous

127


202 IS 6585:1972 Screwless terminal and electrical connections for lighting fittings [supersededby IS:10322(Part 3)] 203 IS 6620:1972 Code of practice for installation, operation and maintenance of electric service lifts 204 IS 6789:1972 Bolted flameproof cable coupler and adaptors 205 IS 6875(Part 1):1973 Control switches(switching devices for control and auxiliary circuits includingcontactor relays)for voltages upto and including 1000V ac & 1200V dc: Part 1 General requirements [superseded by IS 13947(Part 5/Section 1)]

206 IS 6875(Part 2):1973 Control switches(switching devices for control and auxiliary circuits including contactor relays)for voltages upto and including 1000V ac and 1200V dc: Part 2Push-buttons and related control switches [Supresded by IS13947(Part 5/Section1)]

207 IS 6875(Part 3):1980 Control switches(switching devices for control and auxiliary circuits includingcontactor relays)for voltages upto and including 1 000 V ac and 1200 V dc : Part 3 Rotary control switches [superseded by IS 13947(Part 5/Section 1)]

208 IS 6946:1973 Flexible (pliable) non-metalic conduits for electrical installations [Superseded by IS 9537(Part 5)] 209 IS 7023:1973 Methods of tests for high pressure mercury vapour lamps [superseded by IS 9900 (Part 1) to (Part 4)] 210 IS 7153:1973 Domestic electric controls for household appliances (withdrawn) 211 IS 7218:1974 Dry batteries for hearing aids 212 IS 7253:1974 Dry batteries for photoflash equipment 213 IS 7389:2004 Pressurized enclosures of electrical equipment for use in hazardous area (second revision)(Superseded by IS/IEC 60079-2(2007) 214 IS 7389(Part 1):1976 Pressurized enclosures of eletrical apparatus for use in explosive atmospheres: Part 1 Pressurized enclosures with no internal source of flammable gas or vapour (first revision)

215 IS 7404(Part 2):1991 Paper covered copper conductors : Part 2 Rectangular conductors (first revision) (superseeding IS: 1666) 216 IS 7724:2004 Electrical Apparatus for explosive gas atmospheres - Powder filling 'q' (first revision) (Superseded by IS/IEC 60079-5(2007) 217 IS 7733:1975 Code of practice for electrical wiring installations in hospitals 218 IS 7759:1975 Lift door locking devices and contacts 219 IS 7987:1976 Guide for selection of high voltage ac circuit breakers (withdrawn) 220 IS 8224:1976 Electric lighting fittings for division 2 areas 221 IS 8239:1976 Classification of maximum surface temperatures of electrical equipment for use in explosive atmospheres (superseded by IS 222 IS 8240:1976 Guide for electrical equipment for explosive atmosphere (superseded by IS 13346:1992) 223 IS 8241:1976 Method of marking for identifying electrical equipment for explosive atmospheres(superseded by IS 13346:1992)

128


224 IS 8264:1976 Air-drying and anti-tracking insulating varnishes for electrical purposes [superseded by IS 10026 (Part 3)] 225 IS 8289:1976 Electrical equipment with type of protection 'n' 226 IS 8544(Part 1):1977 Motor starters for voltages not exceeding 1 000 V: Part 1 Direction line ac starters [superseded by IS 13947 (Part 4/Section 1):1993] 227 IS 8544(Part 2):1977 Motor starters for voltages not exceeding 1 000 V : Part 2 Star-delta starters [superseded by IS 13947 (Part 4/Section 1):1993] 228 IS 8544(Part 3/Sec Motor starters for voltages not exceeding 1000 V : 1):1979 Part 3 Rheostatic motor starters, Section 1 General requirements [superseded by IS 13947 (Part 4/Section 1):1993]

229 IS 8544(Part 3/Sec Motor starters for voltages not exceeding 1 000 V: 2):1979 Part 3 Rheostatic motor starters, Section 2 Additional requirements for ac rheostatic motor controllers [superseded by IS 13947 (Part 4/Section 1):1993]

230 IS 8544(Part 4):1979 Motor starters for voltages not exceeding 1 000 V: Part 4 Reduced voltage ac starters: two step auto-transformer starters [superseded by IS 13947 (Part 4/Section 1);1993] 231 IS 8603(Part 1):1977 Dimensions for porcelain transformer bushings for use in heavily polluted atmospheres: Part 1 12 kV and 17.5 kV bushings 232 IS 8603(Part 2):1977 Dimensions for porcelain transformer bushings for use in heavily polluted atmospheres: Part 2 24 kV buhsings 233 IS 8603(Part 3):1977 Dimensions for porcelain transformer bushings for use in heavily polluted atmospheres: Part 3 36 kV bushings 234 IS 8724:1978 Dimensions of carrier and bases used in rewirable fuses [superseded by IS:2086] 235 IS 8783:1978 PVC insulated winding wires for submersible motors for 85 C operation 236 IS 8828:1996 Circuit-breakers for over current protection for household and similar installations (second revision) 237 IS 9046:1978 AC contactors of voltage above 1000 V upto and including 11000 V 238 IS 9080(Part 3):1979 Safety requirements in electro-heat installations: Part 3 Particular requirements for mains and medium frequency induction furnace installations (Superseded by IS/IEC 60519-3:1988)

239 IS 9166:1979 Spark test apparatus for intrinsically safe circuits 240 IS 9224(Part 1):1979 Low voltage fuses: Part 1 General requirements [superseded by IS 13703 (Part 1):1993] 241 IS 9224(Part 2):1979 Low voltage fuses: Part 2 Supplementary requirements for fuses for industrial applications (superseding IS:2208) [superseded by IS 13703 (part 2/Section 1):1993] 242 IS 9224(Part 4):1980 Low voltage fuses: Part 4 Supplementary requirements for fuse- links for the protection of semiconductor devices [superseded by IS 13703 (Part 4):1993] 243 IS 9628:1980 Three-phase induction motors with type of protection 'n'Superseded by IS/IEC 60079-15(2005) 244 IS 9803:1981 Buffers for electric passenger and goods lifts

129


245 IS 9878:1981 Safety gears and governors for electric passenger and goods lifts 246 IS 10051:1981 PVC insulated winding wires for submersible motors for 105 degree centrigrade operation 247 IS 10114:1982 Enamelled and varnish bonded glass covered rectangular copper 248 IS 10191:1982 Car and counterweight guide rails, guide rail supports and fastenings for lifts 249 IS 10406:1983 Intrinsically safe transformers primarily for bell signalling circuits 250 IS 10448:1983 Retiring cam for electric passenger and goods lifts 251 IS 10452(Part 1):1983 Methods of tests for covered conductors for electrical equipment: Part 1 Paper covered and cotton covered conductors 252 IS 10452(Part 2):1983 Methods of tests for covered conductors for electrical equipment: Part 2 Fibrous covered conductors 253 IS 10542:1983 Safety requirements for refrigerators and food freezers for household and similr purposes [Superceded by IS 302(Part 2/Sec 24):1994]

254 IS 10810(Part 18):1984 Methods of test for cables:Part 18 Colour fastness to day light 255 IS 10913:1984 Brakes for electric passenger and goods lifts 256 IS 11005:1984 Dust tight ignition proof enclosures of electrical equipment 257 IS 11039:1983 Requirements for mounting on rails in switchgear and controlgear installations (Sprseded by IS/IEC 60715:1981 258 IS 11349:1985 Oscilloscopes and peak voltmeters for impulse tests 259 IS 11426:1985 Specification for Alternating Current Precision Kilowatt-hour Meters of Glass 0.5 for Testing Purposes 260 IS 11576:1986 Barlow's wheel 261 IS 11599:1986 Portable ac clip-on-ammeters 262 IS 11615:1986 Car and counterweight guide shoes for electric passenger and goods 263 IS 11633:1986 Lift doors 264 IS 11706:1986 General requirements of car-frame for electric passangers and goods 265 IS 12155:1987 General and safety requirements for fans and regulators for household and similar purposes 266 IS 12315(Part 1):1988 Methods of determining the minimum ignition temperature of dusts: Part 1 Dust layer on a heated surface at a constant temperature (Superseded by IS/IEC 61241-1(2000)) 267 IS 12661(Part 1):1988 High voltae motor-starter: Part 1 Direct-on-line (full voltage) ac starters 268 IS 12784(Part 1):1989 Electrical measuring transducers for converting ac electrical quantities into dc electrical quantities- specification Part 1 General 269 IS 12788:1989 PVC covered wires overcoated with nylon for submerssible motors 270 IS 12802:1989 Temperature rise measurement of rotating electrical machines (withdrawn) 271 IS 12819:1989 Transformer oil feed stock (TOFS) base stock (TOBS) (Withdrawn) 272 IS 12824:1989 Type of duty and classes of rating assigned to rotating electrical machines (withdrawn) 273 IS 12956:1990 Sealed cylindrical type rechargeable nickel cadmium cells (tentative standard withdrawn. Regular standrd being prepaired) 274 IS 12974:1990 Semiconductor contactors(Superceded by IS/IEC 60947-4-1:2000

130


275 IS 13346:2004 Electrical apparatus for explosive gas atmospheres - General requirements(first revision) 276 IS 13408(Part 1):1992 Code of practice for the selection, installation and maintenance of electrical apparatus for use in potentially explosive atmospheres(other than mining application or explosive processing manufacture): Part 1 General recommendations(Superseded by

277 IS 13947(Part 1):2004 Low-voltage switchgear and controlgear: Part 1 General rules (superseding IS 2147 & 4237) 278 IS 13947(Part 2):1993 LV Switchgear and controlgear: Part 2 Circuit breakers (superseding IS 2516 & its parts) 279 IS 13947(Part 3):1993 Low-voltage switchgear and controlgear: Part 3 Switches, disconnectors,switch-disconnectors and fuse combination unit (superseding IS 4064 (part 1 &2)

280 IS 13947(Part 4/Sec Low-Voltage switchgear and controlgear: Part 4 Contactors and 1):1993 motor starters,Section 1 Electromechanical contactors and motor starters[superseding IS 2959 and 8544 (all parts)] 281 IS 13947(Part 5/Sec Low-voltage switchgear and controlgear: 1):2004 Part 5 Control circuit devices and switching elements, Section 1 Electromechanical control circuit devices (first revision){Superseding IS 6875 (All parts)}

282 IS 13985:1994 Terminology for tools and equipment to be used in live working(superceeded by IS 15416) 283 IS 14154(Part 1):1996 Electrical apparatus with protection by enclosure for use in the presence of combustible dusts: Part 1 Specification for apparatus (Superseded by IS/IEC 61241-0(2004)) 284 IS 14154(Part 2):1997 Electrical apparatus with protection by enclosure for use in presence of combustible dust: Part 2 Guide to selection, installation and maintenance (Superseded by IS/IEC 61241-14(2004)) 285 IS 14390:1996 Var-hour meters, Class 3.0 [Superseding IS 722 (Part 6):1980] 286 IS 15451:2004 Electrical apparatus for explosive gas atmospheres - Encapsulation

131

ANNEX 2

ASPECT WISE POSITION OF STANDARDS

PRODUCT 819 METHODS OF TEST 222 CODE OF PRACTICES 160 TERMINOLOGY 58 DIMENSION 47 SYMBOLS 19 OTHERS 73

TOTAL : 1398

132

ANNEX 3

EQUIVALENT STANDARDS/DOCUMENTS Sl. No. IS Number/ DOC Number Title ISO/IEC

DUAL NUMBER STANDARDS 1 DOC.ETD 11(6253) Stationary lead acid storage batteries for motor vehicles - Valve regulated type 2 DOC.ETD 11(6367) Secondary cells and batteries containing alkaline or other non-acid electrolytes – Sealed nickel- cadmium prismatic Rechargeable single cells

3 DOC.ETD 11(6368) General purpose lead-acid batteries (valve-regulated types) – Part 1: General requirements, functional characteristics – Methods of test

4 DOC.ETD 11(6369) Secondary cells and batteries containing alkaline or other non-acid electrolytes –Portable sealed rechargeable single cells – Part 1: nickel-cadmium 5 DOC.ETD 11(6370) Secondary cells and batteries containing alkaline or other non-acid electrolytes – Portable sealed rechargeable single cells –Part 2: nickel-metal hydride 6 DOC.ETD 11(6371) Secondary cells and batteries containing alkaline or other non-acid electrolytes – Secondary lithium cells and batteries for portable applications

7 DOC.ETD 11(6372) Secondary cells and batteries containing alkaline or other non-acid electrolytes – Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in 8 DOC.ETD 33(6337) Winding Wires – Test methods – Part 2 : Determination of dimensions (First Revision) 9 DOC.ETD 33(6373) Packaging of winding wires – Part 3-1: Taper barrelled delivery spools – Basic dimensions

10 DOC.ETD 33(6374) Packaging of winding wires – Part 4-1: Methods of test – Delivery spools made from thermoplastic materials 11 DOC.ETD 33(6375) Specifications for particular types of winding wires – Part 3: Polyester enamelled round copper wire, class 155 12 DOC.ETD 33(6376) Specifications for particular types of winding wires – Part 4: Solderable polyurethane enamelled round copper wire, class 130

13 DOC.ETD 33(6377) Specifications for particular types of winding wires – Part 8: Polyesterimide enamelled round copper wire, class 180 14 DOC.ETD 7(6082) Low-voltage switchgear and controlgear: IS/IEC 60947-1:2007 15 DOC.ETD 7(6083) Low voltage switchgear and controlgear IS/IEC60947-5-2:2007 :Part 5 Control circuit devices and switching elements Section 2 Proximity

133

Sl. No. IS Number/ DOC Number Title ISO/IEC 16 DOC.ETD 3(6352) Insulating liquids - Specifications for unused synthetic organic esters for electrical purposes 17 DOC.ETD 3(6353) Classification of insulating liquids according to fire-point and net calorific value 18 DOC.ETD 3(6354) Synthetic organic esters for electrical purposes - Guide for maintenance of transformer esters in equipment 19 DOC.ETD 3(6355) Specification for unused insulating mineral oils for cables with oil ducts 20 DOC.ETD 3(6356) Mineral oil-filled electrical equipment – Application of dissolved gas analysis (DGA) to factory tests on electrical equipment

21 DOC.ETD 3(6357) Insulating liquids - Contamination by polychlorinated biphenyls (PCBs) - Method of determination by capillary column gas chromatography

22 DOC.ETD 3(6358) Insulating liquids - Determination of the dielectric dissipation factor by measurement of the conductance and capacitance - Test method

23 DOC.ETD 3(6359) Mineral insulating oils - Determination of kinematic viscosity at very low temperatures 24 DOC.ETD 3(6360) Oil-filled electrical equipment – Sampling of gases and of oil for analysis of free and dissolved gases – guidance (Second Revision)

25 DOC.ETD 3(6361) Specification of technical grade Sulfur hexafluoride (SF6) for use In electrical equipment (First Revision)

26 DOC.ETD 3(6362) Insulating liquids – methods for counting and sizing particles (First Revision) 27 DOC.ETD 3(6363) Classification of insulating liquids (First Revision) 28 IS 1401:2008 Protection of persons and equipment by IEC 61032 : 1997 enclosures - Probes for verification (second revision) 29 IS 1876:2005 Voltage measurement by means of IEC 60052:2002 standard air gaps(first revision) 30 IS 1885(Part 9):1992 Electrotechnical Vocabulary: Part 9 IEC 60050(446):1983 Electrical relays (second revision) 31 IS 1885(Part 10):2008 Electrotechnical Vocabulary: Part 10 IEC 60050(448):1995 Power system protection (second 32 IS 1885(Part 15):2008 Electrotechnical vocabulary: Part 15 IEC 60050(482):2004 Primary and secondary cells and batteries (second revision) [Amalgamating IS 1885(Part 8):1986]

33 IS 1885(Part 27):2008 Electrotechnical Vocabulary: Part 27 IEC 60050(551):1998 Power electronics (Third Revision)

134

Sl. No. IS Number/ DOC Number Title ISO/IEC 34 IS 1885(Part 28):1993 Electrotechnical vocabulary: Part 28 IEC 60050(321):1986 Instrument transformers (first revision) 35 IS 1885(Part 32):1993 Electrotechnical Vocabulary: Part 32 IEC 60050(461):1984 Electric cables (first revision) 36 IS 1885(Part 35):1993 Electrotechnical vocabulary: Part 35 IEC 60050(411):1996 Rotating machinery (first revision)

37 IS 1885(Part 37):1993 Electrotechnical vocabulary: Part 37 IEC 60050(691):1973 Tariffs for electricity (first revision) 38 IS 1885(Part 38):1993 Electrotechnical vocabulary: Part 38 IEC 60050(421):1990 Power transformers and reactors (second revision) 39 IS 1885(Part 42):1993 Electrotechnical Vocabulary: Part 42 IEC 60050(436) :1990 Power capacitors (second revision) 40 IS 1885(Part 51):1993 Electrotechnical vocabulary: Part 51 IEC 60050(841):1983 Industrial electro-heating 41 IS 1885(Part 54):1993 Electrotechnical Vocabulary: Part 54 IEC 60050(471):1984 Insulators (First revision) 42 IS 1885(Part 57):2008 Electrotechnical vocabulary: Part 57 IEC 60050(131):2002 Circuit Theory (Second Rrevision) 43 IS 1885(Part 60):1993 Electrotechnical Vocabulary: Part 60 IEC 60050(426):1990 Electrical apparatus for explosive atmospheres (first revision)

44 IS 1885(Part 62):1993 Electrotechnical vocabulary: Part 62 IEC 60050(212):1990 Solid insulating materials (first revision) 45 IS 1885(Part 69):1993 Electrotechnical Vocabulary: Part 69 IEC 60050(602):1983 Generation, transmission and distribution of electricity - Generation 46 IS 1885(Part 70):1993 Electrotechnical Vocabulary: Part 70 IEC 60050(604):1987 Generation, transmission and distribution of electricity - operation 47 IS 1885(Part 71):1993 Electrotechnical Vocabulary: Part 71 IEC 60050(605):1983 Generation, transmission and distribution of electricity - Substations 48 IS 1885(Part 72):2008 Electrotechnical Vocabulary : Part 72 IEC 60050 (101):1998 Mathematics (First Revision) 49 IS 1885(Part 73/Sec Electrotechnical vocabulary: Part 73 IEC60050(111-):1984 1):1993 Physics and Chemistry, Section 1 Physical concepts

50 IS 1885(Part 73/Sec Electrotechnical Vocabulary: Part 73 IEC 60050(111-):1984 2):1993 Physics and chemistry, Section 2 Electrotechnical concepts 51 IS 1885(Part 73/Sec Electrotechnical Vocabulary: Part 73 IEC 60050:(111-3):77 3):1993 Physics and chemistry, Section 03 Concepts related to quantities and units

52 IS 1885(Part 74):1993 Electroechnical Vocabulary: Part 74 IEC 60050(151): 1978 Electrical and magnetic devices 53 IS 1885(Part 75):1993 Electrotechnical Vocabulary: Part 75 IEC 60050(351) 1975 Automatic control

135

Sl. No. IS Number/ DOC Number Title ISO/IEC

54 IS 1885(Part 76):1993 Electrotechnical vocabulary: Part 76 IEC 60050(431):1980 Transducers 55 IS 1885(Part 77):1993 Electrotechnical Vocabulary: Part 77 IEC 60050(466): 1990 Overhead lines 56 IS 1885(Part 78):1993 Electrotechnical Vocabulary: Part 78 IEC 60050(601):1985 Genereation, transmission and distribution of electricity – General

57 IS 1885(Part 79):1993 Electrotechnical Vocabulary: Part 79 IEC 60050(603):1986 Generation, transmission and distribution of electiricity - Power system planning and management

58 IS 1885(Part 80):1994 Electrotechnical vocabulary: Part 80 IEC 60050(301):1983 General terms on measurements in electricity

59 IS 1885(Part 81):1993 Electrotechnical vocabulary: Part 81 IEC 60050(302):1983 Electrical measuring instruments 60 IS 2026(Part 3):2009 Power Transformers - Part 3 Insulaiton IEC 60076-3 (2000) levels, dielectric tests and external clearances in air (third revision) 61 IS 2026(Part 7):2009 Power Transformers - Part 7 Loading IEC 60076-7(2005) guide for oil immersed power 62 IS 2026(Part 8):2009 Power Transformers - Part 8 Application guide 63 IS 2071(Part 1):1993 High voltage test- techniques: Part 1 IEC 60060-1:1989 General definitions and test requirements (second revision).

64 IS 2165(Part 5):2005 Insulation coordination:Part 5 IEC 60071-5:2002 Procedures for high- voltage direct current (HVDC) converter stations 65 IS 2824:2007 Method for the determination of the IEC 60112:2003 proof and the comparative tracking indices of solid insulating materials

66 IS 2993:1998 A.C. motor capacitors (second revision) IEC 60252:1993 67 IS 3427:1997 A.C. Metal enclosed swtiichgear and IEC 60298:1990 controlgear for rated voltages above 1kV upto and including 52 kV(first

68 IS 5825:1993 Test procedure for the determination of IEC 60172(1987) the temperature index of enamelled winding wires (first revision) 69 IS 6362:1995 Designation of methods of cooling of IEC 60034-6:1991 rotating electrical machines 70 IS 6991:1985 Radiographic cassettes IEC 60406(1975) 71 * IS 7693:2004 Electrical apparatus for explosive gas IEC 60079-6(1995) atmospheres - Oil immersion "o" (first revision) 72 * IS 7820:2004 Electrical apparatus for explosive gas IEC 60079-4(1975) atmospheres - Method of test for ignition temperatures (first revision)

136

Sl. No. IS Number/ DOC Number Title ISO/IEC 73 IS 8437(Part 1):1992 Guide on effects of current passing IEC 60479-1:1984 through human body: Part 1General aspects(first revision)

74 IS 8437(Part 2):1992 Guide on effects of current passing IEC 60479-2:1987 through human body : Part 2 Special aspects (first revision). 75 * IS 8504(Part 1):1994 Guide for determination of thermal IEC 60216-1 (1990) endurance properties of electrical insulating materials : Part 1 General guidelines for ageing procedures & evaluation of test results (first revision)

76 IS 8516:2011 Electrical Insulating materials – IEC 60426(2007) Determination of electrolytic corrosion caused by insulating materials – Test methods (First Revision)

77 IS 8623(Part 1):1993 Specification for low voltage switchgear IEC 60439-1(1985) and controlgear assemblies: Part 1 Requirements for type-tested and partially type tested assemblies

78 IS 8623(Part 2):1993 Specification for low voltage switchgear IEC 60439-2(1987) and controlgear assemblies: Part 2 Particular requirements for

79 IS 8623(Part 3):1993 Low-voltage switchgear and controlgear IEC 60439-3(1990) assemblies: Part 3 Particular requirements for equipment where unskilled persons have access for their use.

80 IS 9335(Part 2):1998 Cellulosic papers for electrical IEC 60554-2(2001) purposes: Part 2 Methods of test (superseding IS:2188) 81 IS 9348:1998 Coupling capacitor and capacitor IEC 60358:1990 82 * IS 9735:2003 Electrical apparatus for explosive gas IEC 60079-1-1(2002) atmospheres - Flameproof enclosures "d" Method of test for ascertainment of maximum experimental safe gap (first revision)

83 IS 9835(Part 1):2001 Series capacitors for power systems: IEC 60143-1:1992 Part 1 General performance testing and rating- Safety requirements - guide for installation (first revision)

84 * IS 9920(Part 1):2002 High Voltage Switches - Part 1 : IEC 60265:1998 Switches for Rated Voltages Above 1 kV and Less Than 52 KV

85 IS 9920(Part 2):2001 High voltage switches : Part 2 High IEC 60265-2:1988 voltage switches for rated voltages of 52 kV and above (First revision) 86 IS 9947:2011 Electrical Insulating materials used IEC 60587(2007) under severe ambient conditions – Test methods for evaluating resistance to tracking and erosion (First Revision)

137

Sl. No. IS Number/ DOC Number Title ISO/IEC 87 IS 10189(Part 2/Sec Industrial process control valves IEC 60534-2-1:1998 1):2000 Part2/Sec 1 Flow Capacity-sizing Equations for fluid flow under Installed conditions (superseding of IS 10189(Part 2/Sec 1):1992

88 IS 10593:2006 Mineral oil-impregnated electrical IEC 60599(1999) equipment in service - Guide to the interpretation of dissolved and free gases analysis (second revision)

89 IS 11182(Part 5):1993 Guide for evaluation of insulation IEC 60941(1988) system of electrical equipment: Part 5 Mechanical endurance functional tests 90 IS 11298(Part 2):1999 Plastic films for electrical purposes: IEC 60674-2(1988) Part 2 Methods of test (first revision) 91 IS 11298(Part 3/Sec Plastic films for electrical purposes:Part IEC 60674-3-2 (1992) 3):1998 3 Specifications for individual materials,Section 3 Requirements for balanced biaxially oriented Polyethylene Terephalate(PET) films used for electrical insulation

92 IS 11298(Part 3/Sec Plastic films for electrical purposes: IEC 60674-3-3(1992) 4):1998 Part 3 Specification for individual materials, Section 4 Requirements for polycabonate (PC) films used or

93 IS 11298(Part 3/Sec Plastic films or electrical purposes: Part IEC 60674-3-7(1992) 8):1998 3 Specification for individual materials, Section 8 Requirements for fluoroethylene (FEP) films used for

94 IS 11298(Part 3/Sec 5- Plastic Films for Electrical Purposes IEC60674-3-4to6(1993 7):1998 Part 3 Specification for Individual Materials Section 5-7 Requirements for Polyimide Films

95 IS 12032(Part 1):1987 Graphical symbols for diagrams in the IEC 60617-1(1985) field of electrotechnology: Part 1 General information,general index,cross reference table

96 IS 12032(Part 2):1987 Graphical symbols for diagrams in the IEC 60617-2(1983) field of electrotechnology: Part 2 Symbols elements, qualifying symbols and other symbols having general

97 IS 12032(Part 3):1987 Graphical symbols for diagrams in the IEC 60617-3(1983) field of electrotechnology:Part 3 Conductors and connecting devices 98 IS 12032(Part 4):1987 Graphical symbols for diagrams in the IEC 60617-4(1984) field of electrotechnology: Part 4 Passive components 99 IS 12032(Part 6):1987 Graphical symbols for diagrams in the IEC 60617-6(1983) field of electrotechnology: Part 6 Production and conversion of electrical

138

Sl. No. IS Number/ DOC Number Title ISO/IEC 100 IS 12032(Part 7):1987 Graphical symbols for diagrams in the IEC 60617-7(1983) field of electrotechnology: Part 7 Switchgear, controlgear and protective devices

101 IS 12032(Part 8):1987 Graphical symbols for diagrams in the IEC 60617-8(1983) field of electrotechnology: Part 8 Measuring instruments, lamps and signalling devices

102 IS 12032(Part 11):1987 Graphical symbols for diagrams in the IEC 60617-11(1983) field of electrotechnology: Part 11 Architectural and topographical installation plans and diagrams

103 IS 12640(Part 1):2008 Residual current operated circuit- IEC 61008-1:1996 breakers for household and simililar uses : Part 1 circuit-breakers without integral overcurrent protection(RCCBs) (First Revision)

104 IS 12640(Part 2):2008 Residual current operated circuit IEC 61009-1:1996 breakers for household and similar uses: Part 2 circuit breakers with integral overcurrent protection(RCBOs)

105 IS 12672:1989 Internal fuses and internal overpressure IEC 60593:1977 106 IS 12729:2004 Common specification for high voltage IEC 60694 :1996 switchgear and controlgear standards (first revsion ) 107 IS 12747(Part 1):2011 Combined flexible materials for IEC 60626-1(2009) electrical insulation - Part 1 Definition and general requirements (First 108 * IS 12747(Part 3):1998 Combined flexible materials for IEC 60626-3(1996) electrical insulation: Part 3 Specifications for individual

109 IS 12762(Part 1):2010 Photovoltaic devices: Part 1 IEC 60904-1:2006 Measurement of photovoltaic current- voltage characteristics [first revision) 110 * IS 12762(Part 2):1993 Photovotaic devices: Part 2 IEC 60904-2(1989) Requirements for reference solar cells 111 * IS 12762(Part 3):1998 Photovoltaic devices: Part 3 IEC 60904-3(1989) measurement principles for terrestrial (PV) solar devices with reference 112 IS 12762(Part 5):2010 Photovoltaic devices: Part 5 IEC 60904-5:1993 Determination of the equivalent cell temperature (ECT) of photovoltaic (PV) devices by the open-circuit voltage method

113 IS 12762(Part 8):2000 Photovoltaic devices: Part 8 IEC 60904-8:1998) Measurement of spectral response of a photovoltaic (PV) device 114 IS 12762(Part 9):2010 Photovoltaic devices: Part 9 Solar IEC 60904-9:2007 simulator performance requirements 115 IS 12762(Part 10):2010 Photovoltaic devices: Part 10 Methods IEC 60904-10:1998 of linearity measurements

139

Sl. No. IS Number/ DOC Number Title ISO/IEC 116 IS 12763:1989 Procedures for temperature and IEC 60891(1987) irradiance corrections to measured I-V characteristics of crystaline silicon

117 IS 12998(Part 1):1991 Method f measurement of airborne ISO 1680-1:1986 noise emitted by rotating machinery: Part 1 Engineering method for free field conditions over a reflecting plane

118 IS 12998(Part 2):1991 Method of measurement of airborne ISO 1680-2:1986 noise emitted by rotating machinery: Part 2 Survey method

119 IS 13072:1991 Sulphur hexafluoride for electrical IEC 60376 (1971) 120 IS 13107:1991 Guide for measurement of winding IEC 60279(1969) resistance of an ac machine during operation at alternating voltage 121 IS 13118:1991 General requirements for circuit IEC 60056:1987 Breakers for voltages above 1 000 V

122 IS 13234:1991 Guide for short circuit current IEC 60909:1988 calculations ln three-phase ac systems(superseding IS 5728) 123 IS 13235:1991 Calculation of the effects of short- IEC 60865:1986 circuit currents Superseding IS 124 IS 13236:1991 Methods for counting and sizing IEC 60970(1989) particles in insulating liquids 125 IS 13465(Part 1):2005 Resin based reactive compounds used IEC 60455-1(1998) for electrical insulation: Part 1 Definitions and general requirements

126 IS 13465(Part 2):2005 Resin based reactive compounds used IEC 60455-2(1998) for electrical insulation: Part 2 Methods of test [first revision] 127 IS 13465(Part 3/Sec Resin based reactive compounds used IEC 60455-3-1(2003) 1):2006 for electrical insulation - Part 3: Specification for individual materials - Section 1: Unfilled epoxy resinous

128 IS 13465(Part 3/Sec Resin based reactive compounds used IEC 60455-3-2 2):2006 for electrical insulation - Part 3: Specification for individual materials - Section 2: Quartz filled epoxy resinous compounds [first revision)

129 IS 13465(Part 3/Sec Resin based reactive compounds used IEC 60455-3-3 3):2006 for electrical insulation - Part 3: Specification for individual materials - Section 3: Unfilled polyurethane

130 IS 13465(Part 3/Sec Resin based reactive compounds used IEC 60455-3-4 4):2006 for electrical insulation - Part 3: Specification for individual materials - Section 4: Filled polyurethane

140

Sl. No. IS Number/ DOC Number Title ISO/IEC 131 IS 13465(Part 3/Sec Resin based reactive compounds used IEC 60455-3-5(2001) 6):2006 for electrical insulation - Part 3: Specification for individual materials - Section 6: Unsaturated polyester based impregnating resins

132 IS 13503:1992 General classification of insulating liquids IEC 61039(1990) 133 IS 13516:1993 Methods of synthetic testing of high IEC 60427:1989 voltage alternating current circuit 134 IS 13588:1993 Spring operated impact test apparatus IEC 60817(1984) and calibration 135 IS 13703(Part 1):1993 Low voltage Fuses for voltages not IEC 60269-1(1986) exceeding 1000 V ac or 1500 V dc: Part 1 General requirements [superseding IS 9224 (Part 1):1979]

136 IS 13703(Part 2/Sec Low voltage fuses for voltages not IEC 60269-2(1986) 1):1993 exceeding 1000 V ac or 1500 V dc: Part 2 Fuses for use by authorized persons, Section 1 Supplementary requirements [superseding IS 9224 (Part 2):1979]

137 IS 13703(Part 2/Sec Low voltage fuses for voltages not IEC 60269-2-1(1987) 2):1993 exceeding 1000 V ac or 1500 V dc: Part 2 Fuses for use by authorized persons, Section 2 Examples of standardized fuses

138 IS 13703(Part 4):1993 Low voltage fuses for voltages not IEC 60269-4(1986) exceeding 1000 V ac or 1500 V dc: Part 4 Supplementary requirements for fuse- links for the protectlon of semiconductor devices

139 * IS 13730(Part 0/Sec Specifications for particular types of IEC 60317-0-1 1):1993 winding wires: Part 0 General requirements, Section 1 Enamelled round copper wire

140 IS 13730(Part 0/Sec Specifications for particular types of IEC 60317-0-2:2005 2):2011 winding wires: Part 0 General requirements, Section 2 Enamelled rectangular copper wire (First Revision)

141 IS 13730(Part 0/Sec Specifications for particular types of IEC 60317-0-4:2006 4):2011 winding wires: Part 0 General requirements, Section 4 Glass fibre wound resin of varnish impregnated bare or enamelled rectangular copper wire (First Revision)

142 IS 13730(Part 0/Sec Specifications for particular types of IEC 60317-0-5(2000) 5):2003 winding wires: Part 0 General requirements, Section 5 glass fibre braided, bare or enamelled rectangular copper wire

141


143 IS 13730(Part 1):1993 Specifications for particular types of IEC 60317-1(1990) winding wires: Part 1 Polyvinyl acetal enamelled round copper wire, class 105 [supersedes IS 4800(Part 4):1968] 144 * IS 13730(Part 2):1996 Specifications for particular types of IEC 60317-2(1990) winding wires Part 2: Solderable polyurethane enamlled round copper wire, class 130, with a bonding layer. 145 * IS 13730(Part 3):1996 Specifications for particular types of IEC 60317-3(1990) winding wires Part 3 polyester enamelled round copper wire, class 155 146 IS 13730(Part 4):1993 Specifications for particular types of IEC 60317-4(1990) winding wires: Part 4 Solderable polyurethane enamelled round copper wire, class 130 [Supersedes IS 4800(Part 6):1968]

147 IS 13730(Part 7):1993 Specifications for particular types of IEC 60317-7(1990) winding wiresC Part 7 Polyimide enamelled round copper wire Class 220 [supersedes IS 4800(Part 11):1981]

148 IS 13730(Part 8):1996 Specifications for particular types of IEC 60317-8(1990) winding wires: Part 8 polyesterimide enamelled round copper wire class 180

149 IS 13730(Part 13):1993 Specifications for particular types of IEC 60317-13(1990) winding wires: Part 13 Polyester or polyesterimide overcoated with polyamide-imide enamelled round copper wire, Class 200

150 IS 13730(Part 16):1996 Specifications for particular types of IEC 60317-16 (1990) winding wires: Part 16 Polyester enamelled rectangular copper wire, Class 155

151 IS 13730(Part 17):1996 Specifications for particular types of IEC 60317-17 (1990) winding wires: Part 17 Polyvinyl acetal enamelled rectangular copper wire, Class 105

152 IS 13730(Part 20):1993 Specifications for particular types of IEC 60317-20(1990) winding wires: Part 20 Solderable polyurethane enamelled round copper wire, Class 155

153 IS 13730(Part 26):1996 Specifications for particular types of IEC 60317-26 (1990) winding wires: Part 26 Polyamide-imide enamelled round copper wire, Class 200 154 IS 13730(Part 27):1997 Specifications for particular types of IEC 60317-27(1990) winding wires: Part 27 Paper covered rectangular copper wire 155 IS 13730(Part 28):1997 Specifications for particular types of IEC 60317-28(1990) winding wires: Part 28 Polyesterimide enamelled rectangular copper wire, Class 180

142


156 IS 13730(Part 29):1996 Specifications for particular types of IEC 60317-29(1990) winding wires: Part 29 Polyester or polyesterimide overcoated with polyamide-imide enamelled rectangular copper wire, Class 200

157 IS 13730(Part 31):1997 Specifications for particular types of IEC 60317-31(1990) winding wires: Part 31 Glass-fibre wound, polyester or polyesterimide varnish- treated, bare or enamelled rectangular copper wire, temperature

158 IS 13730(Part 32):1997 Specifications for particular types of IEC 60317-32(1990) winding wires: Part 32 Glass-fibre wound, polyester or polyesterimide varnish-treated, bare or enamelled rectangular copper wire, temperature

159 IS 13730(Part 33):1997 Specifications for particular types of IEC 60317-33 (1990) winding wieres: Part 33 Glass-fibre wound, silicone varnish-treated bare or enamelled rectangular copper wire, temperature index 200

160 IS 13730(Part 34):2000 Specifications for particular types of IEC 60317-34(1997) winding wires: Part 34 Polyester enamelled round copper wire, Class 130 (first revision)

161 IS 13730(Part 39):2005 Specifications for particular types of IEC 60317-39:1992 wires: Part 39 Glass-fibre braided polyester or polyesterimide varnish- treated, bare or enamelled rectrangular copper wire, temperature index 180

162 IS 13730(Part 43):2005 Specifications for particular types of IEC 60317-43:1997 wires: Part 43 Aromatic polyimide tape wrapped round copper wire, class 240 163 IS 13730(Part 44):2005 Specifications for particular types of IEC 60317-44:1997 wires: Part 44 Aromatic polyimide tape rapped rectangular copper wire, class 240

164 IS 13730(Part 48):2005 Specifications for particular types of IEC 60317-48:1999 wires: Part 48 Glass fibre wound resin or varnish impregnated bare or enamelled round copper wire, temperature index



167 IS 13730(Part 53):2005 Specifications for particular types of IEC 60317-53:1999 wires: Part 53 Aromatic polyamide (aramid ) tape wrapped rectangular copper wire, temperature index 220

143

Sl. No. IS Number/ DOC Number Title ISO/IEC 168 * IS 13770:1993 Insulating foam-filled tubes and solid IEC 60855:1985 rods for live working 169 * IS 13771:1993 Conductive clothing for live working at IEC 60895:1987 nominal voltage up to 800 kV ac 170 * IS 13772:1993 Hand tools for live working up to 1000 V IEC 60900:1989 ac and 1500 V dc

171 IS 13773:1993 Sleeves of insulating material for live IEC 60984:1990 working 172 * IS 13774:1993 Specification for gloves and mitts of IEC 60903:1988 insulating materials for live working 173 IS 13778(Part 1):1993 Methods of tests for winding wires: Part IEC 60851-1:1985 1 General 174 IS 13778(Part 2):1993 Methods of tests for winding wires: Part IEC 60851-2:1985 2 Determination of dimensions 175 IS 13778(Part 3):1993 Methods of tests for winding wires: Part IEC 60851-3(1985) 3 Mechanical properties 176 IS 13778(Part 4):1994 Methods of tests for winding wires: Part IEC 60851-4:1985 4 Chemical properties 177 IS 13778(Part 5):1993 Methods of tests for winding wires: Part IEC 60851-5(1985) 5 Electrical properties 178 IS 13778(Part 6):1993 Methods of tests for winding wires: Part IEC 60851-6:1985 6 Thermal properties 179 IS 13925(Part 2):2002 Shunt capacitors for ac power systems IEC60871-2:1999 having a rated voltage above 1000 V : Part 2 Endurance testing (first revision)

180 IS 13925(Part 3):2002 Shunt capacitors for ac power systems IEC 60871-3:1996 having a rated voltage above 1000 V: Part 3 Protection of shunt capacitors and shunt capacitors banks.

181 IS 13937(Part 1):1994 Statistical method of determining and ISO 7574-1:1985 verifying standard noise emission values of machinery and equipment: Part 1 General conditions and definitions

182 IS 13937(Part 2):1994 Statistical method of determining and ISO 7574-2:1985 verifying standard noise emission values of machinery and equipment: Part 2 Methods of stated values for

183 IS 13937(Part 3):1994 Statistical method of determining and ISO 7574-3:1985 verifying standard noise emission values of machinery and equipment: Part 3 Simple (transition) method for stated values for batches of machines

184 IS 13937(Part 4):1994 Statistical method of determining and ISO 7574-1985 verifying standard noise emission values of machinery and equipment: Part 4 Methods for stated values for

144

Sl. No. IS Number/ DOC Number Title ISO/IEC 185 IS 13947(Part 5/Sec Low voltage switchgear and controlgear IEC 60947-5-2(2000) 2):2004 : Part 5 Control circuit devices and switching elements Section 2 Proximity

186 IS 13961:1994 Insulating poles (insulating sticks) and IEC 60832:1988 universal tool attachments (fittings) for live working

187 IS 14195:1994 Brush-holders for electrical machines IEC 61015(1990) guide to the measurement of the static thrust applied to brush 188 IS 14196:1994 Definitions and terminology of brush- IEC 60560(1977) holders for electrical machines 189 IS 14197:1994 Code for model acceptance tests of IEC 60193:1965 hydraulic turbines 190 IS 14198(Part 1):1994 Rules for steam turbines thermal IEC 60953-1:1990 acceptance tests - Method A

191 IS 14198(Part 2):1994 Rules for steam turbines thermal IEC 60953-2:1990 acceptance tests - Method B 192 IS 14205(Part 1):1994 Steam turbines Part 1 Specification IEC 60045-1:1991 193 IS 14222:1995 Impulse withstand levels of rotating ac IEC 60034-15:1990 machines with form wound stator coils 194 IS 14244:1995 Characteristic parameters of stand IEC 61194(1992) alone photovoltaic (PV) systems 195 IS 14254(Part 1):2003 Programmable controller: Part 1 General IEC 61131-1(2003) information (first revision) 196 IS 14254(Part 2):2003 Programmable Controllers: Part 2 IEC 61131-2(2003) Equipment Requirements and Tests (first revision) 197 IS 14286:2010 Crystalline silicon terrestrial IEC 61215:2005 photovoltaic (PV) modules - Design qualiication and type approval (first revision)

198 IS 14568(Part 2):1998 Dimensions and output series for IEC 60072-2(1990) rotating electrical machines Part 2 Frame numbers 355 to 1000 and flange numbers 1180 to 2360

199 * IS 14570:1998 Electrical measuring transducers for IEC 60688:1992 converting AC electrical quantities to to analogue or digital signals

200 IS 14571:1998 Electrical measuring Instruments X-Y IEC 61028(1991) recorders. 201 IS 14577:1998 Short-circuit current evaluation with IEC 60363(1998) special regard to rated short-circuit capacity of circuit-breakers in 202 IS 14614:1998 Residual Current Operated Protective IEC 61543(1995) Devices (RCDs) for household and similar use - Electromagnetic

145

Sl. No. IS Number/ DOC Number Title ISO/IEC 203 IS 14657:1998 Gas-insulated metal-enclosed IEC 61259:1994 switchgear for rated voltage 72.5 kV and above - requirements for switching of bus-charging current by

204 IS 14658:1999 High-voltage alternating current circuit- IEC 61633:1995 breakers- Guide for short-circuit and switching test procedures for metal- enclosed and dead tank circuit-breakers

205 IS 14659:1999 A.C. insulation-enclosed switchgear and IEC 60466:1987 controlgear for rated voltage above 1 kV and upto and including 38 kV 206 IS 14666:1999 High voltage alternating current switch IEC 60420:1990 fuse combinations 207 IS 14674:1999 High voltage alternating current circuit IEC 61166:1993 breakers- Guide for seismic qualifications of high- voltage alternating current circuit-

208 IS 14786:2000 High voltage/ low voltage prefabricated IEC 61330:1995 substations 209 IS 14801:2000 Terminology for high voltage direct IEC 60633(1998) current ( HVDC ) transmission. 210 IS 14841(Part 2/Sec Packaging of winding wires: Part 2 IEC 60264-2-1:1989 1):2000 Cylindrical barrelled delivery spools Section 1 Basic dimensions

211 IS 14841(Part 2/Sec Packaging of winding wires: Part 2 IEC 60264-2-2:1990 2):2000 Cylindrical barrelled delivery spools, Section 2 Specification for returnable spools made from thermoplastic material

212 IS 14841(Part 3/Sec Packaging of winding wires: Part 3 Taper IEC 60264-3-1:1999 1):2000 barrelled delivery spools, Section 1 basic dimensions 213 IS 14841(Part 3/Sec Packaging of winding wires: Part 3 Taper IEC 60264-3-2:1999 2):2000 barrelled delivery spools, Section 2 Specification for returnable spools made from thermoplastic material

214 IS 14841(Part 3/Sec Packaging of winding wires: Part 3 Taper IEC 60264-3-3:1990 3):2000 barrelled delivery spools, Section 3 Specification for non-returnable spools made from thermoplastic material

215 IS 14841(Part 3/Sec Packaging of winding wires: Part 3 Taper IEC 60264-3-4:1999 4):2000 barrelled delivery spools, Section 4 basic dimensions of containers for taper barrelled delivery spools

216 IS 14841(Part 4/Sec Packaging of winding wires: Part 4 IEC 60264-4-1:1997 1):2000 Methods of test, Section 1 Delivery spools made from thermoplastic material

217 IS 14902(Part 1):2001 Performance of high-voltage d.c IEC 60919-1(1988) (HVDC) systems : Part 1 Steady state conditions.

146

Sl. No. IS Number/ DOC Number Title ISO/IEC 218 IS 14902(Part 2):2001 Performance of high-voltage d.c IEC 60919-2(1991) (HVDC) systems : Part 2 Faults and switching.

219 IS 14902(Part 3):2005 Performance of high -voltage direct IEC 60919-3:1999 current (HVDC) systems:Part 3 220 IS 14911(Part 1):2001 Thyristor valves for high-voltage direct IE 60700-1(1998) current (HVDC) power transmission: Part 1 Electrial Testing 221 * IS 14956:2001 Live working - Minimum approach IEC 61472:1998 distances - method of calculation 222 IS 14957:2001 Aerial devices with insulating boom used IEC 61057:1991 for live working 223 IS 14981:2001 Live working - Earthing or earthing and IEC 61219:1993 short-circuiting equipment using lances as a short-circuiting device - lance

224 IS 14993:2001 Saddles, pole clamps (stick clamps) and IEC 61236:1993 accessories for live working 225 * IS 14994:2001 Live working - Guidelines for quality IEC 61318:1994 assurance plans 226 IS 15086(Part 1):2001 Surge arresters: Part 1 Non-linear IEC 60099-1:1991 resistor type gapped surge arresters for a.c. systems [Superseding IS 3070(Part 1)]

227 IS 15086(Part 5):2001 Surge arresters : Part 5 Selection and IEC 60099-5:1996 application recommendations (Superseading IS 4004)

228 IS 15199(Part 1):2002 Power convertors: installed on board IEC 61287-1(1995) railway rolling stock - Part 1 Characteristics and test methods

229 IS 15199(Part 2):2002 Power convertors: installed on board IEC 61287-2(2001) railway rolling stock - Part 2 Additional technical information

230 IS 15382(Part 1):2003 Insulation coordination for equipment IEC 60664-1(2002) within low voltage system: Part 1 Principles requirements and test 231 IS 15382(Part 2/Sec Insulation coordination for equipment IEC 60664-2-1(1977) 1):2003 within low voltage system : Part 2 Appication guide, Section 1 Dimensioning procedure worksheets and dimensioning examples

232 IS 15382(Part 3):2006 Insulation coordination for equipment IEC 60664-3(2003) within low voltage system: Part 3 Use of coatings, potting or moulding for protection against pollution

233 IS 15382(Part 4):2003 Insulation coordination for equipment IEC 60664-4(1997) within low voltage system: Part 4 Consideration of high frequency voltage stress

147

Sl. No. IS Number/ DOC Number Title ISO/IEC 234 IS 15395:2003 Industrial ac net- work affected by IEC 61642 :1997 harmonics- application of filters and shunt 235 * IS 15405(Part 1):2003 Live Working - flame resistance IEC 61482-1:2002 materials for clothing for thermal protection of working thermal hazards of an electric arc Part 1 Test Methods

236 IS 15406(Part 1):2003 Capacitors for microwave ovens: Part 1 IEC 61270-1:1996 General 237 IS 15407:2003 Live working - Guidelines for dielectric IEC 61278:1997 testing of tools and equipment 238 IS 15416:2003 Live working - Terminology for tools IEC 60743:2001 equipments and devices (Superceding IS 13985)

239 IS 15597:2005 Determination of power losses in high IEC 61803:1999 voltage direct current (HVDC) converter stations

240 IS 15617:2005 Power electronics for electrical IEC 61954:2003 transmission and distribution systems- Testing of thyristor valves for static var compensations

241 IS 15638(Part 1):2006 Instruments and software used for IEC 61083-1(2001) measurement in high voltage impluse tests: Part 1 Requirements for instruments( Superseding IS 11349)

242 IS 15638(Part 2):2006 Instruments and software used for IEC 61083-2(1996) measurements in high voltage impulse tests: Part 2 Evaluation of software used for the determination of the parameters of impulse waveforms (Superseding IS 11349)

243 IS 15644:2006 Safety of electric toys IEC 62115(2003) 244 IS 15664:2006 Gas turbines - Acceptance tests ISO 2314(1989) 245 IS 15665:2006 Gas turbines - Vocabulary ISO 11086(1996) 246 IS 15666(Part 1):2006 Gas turbines - Procurement - Part 1: ISO 3977-1(1997) General introduction and definitions 247 IS 15666(Part 2):2006 Gas turbines - Procurement - Part 2: ISO 3977-2(1997) Standard reference conditions and 248 IS 15666(Part 3):2006 Gas turbines - Procurement - Part 3: ISO 3977-3(2004) Design requirements

249 IS 15666(Part 4):2006 Gas turbines - Procurement - Part 4: ISO 3977-4(2002) Fuels and environment 250 IS 15666(Part 5):2006 Gas turbines - Procurement - Part 5: ISO 3977-5(2001) Applications for petroleum and natural gas industries

251 IS 15666(Part 7):2006 Gas turbines - Procurement - Part 7: ISO 3977-5(2002) Technical information

148

Sl. No. IS Number/ DOC Number Title ISO/IEC 252 IS 15666(Part 8):2006 Gas turbines - Procurement - Part 8: ISO 3977-8(2002) Inspection, testing, installation and commissioning

253 IS 15666(Part 9):2006 Gas turbines - Procurement - Part 9: ISO 3977-9(1999) Reliability, availability, maintainability and safety 254 IS 15667:2006 Gas turbines - Data acquisition and ISO 19860(2005) trend monitoring system requirements for gas turbine installations 255 IS 15668:2006 Mineral insulating oils - Methods for the IEC 61198(1993) determination of 2-furfural and related compounds 256 IS 15767:2008 Secondary Cells and Batteries IEC 62259:2003 Containing Alkaline or other Non-Acid Electrolytes – Nickel-Cadmium Prismatic Secondary Single Cells with Partial Gas Recombination

257 IS 60034(Part 1):2004 Rotating electrical machines - Part 1 IS/IEC 60034-1(2004) Rating and performance 258 IS 60034(Part 5):2000 Rotating electrical machines - Part 5: IS/IEC 60034-5(2000) Degrees of protection provided by the integral design of rotating electrical

s machines (IP code) - Classification (Superseding IS 4691)

259 IS 60034(Part 8):2002 Rotating electrical machines - Part 8: IS/IEC 60034-8(2002) Terminal markings and direction of rotation (Superseding IS 4728)

260 IS 60041:2000 Field acceptance tests to determine the IS/IEC 60041(2000) hydraulic performance of turbines, storage pumps and pump turbines 261 * IS 60079:2004 Electrical apparatus for explosive gas IEC 60079-0(2004) atmospheres: Part 0 General requirements (superseding IS 13346)

262 IS 60079(Part 1):2007 Explosive atmospheres : Part 1 IEC 60079-1(2007) Equipment protection by flameproof enclosures "d" (superseding IS 263 IS 60079(Part 2):2007 Explosive atmospheres: Part 2 IEC 60079-2 (2007) Equipment protection by pressurized enclosure "p" (superseding IS

264 IS 60079(Part 5):2007 Explosive atmospheres: Part 5 IEC 60079-5 (2007) Equipment protection by powder filling "q" (superseding IS 7724:2004)

265 IS 60079(Part 7):2006 Explosive atmospheres: Part 7 IEC 60079-7 (2006) Equipment protection by increased safety "e" (superseding IS 6381:2004) 266 IS 60079(Part 11):2006 Explosive atmospheres: Part 11 IEC 60079-11(2006) Equipment protection by intrinsic safety "i" (superseding IS 5780:2002)

149


267 IS 60079(Part 15):2005 Electrical apparatus for explosive gas IEC 60079-15(2005) atmospheres : Part 15 Construction, test and marking of type of protection "n" electrical apparatus (superseding IS 8289)

268 IS 60079(Part 16):1990 Electrical apparatus for explosive gas IEC 60079-16 (1990) atmospheres: Part 16 Artificial ventilation for the protection of 269 IS 60079(Part 17):2007 Explosive atmospheres : Part 17 IEC 60079-17 (2007) Electrical installations inspection and maintenance 270 * IS 60079(Part 18):2004 Electrical apparatus for explosive gas IEC 60079-18:2004 atmospheres : Part 18 Construction, test and marking of type of protection encapsulation "m" electrical apparatus (Superseding IS 15451)

271 IS 60079(Part 19):2006 Explosive atmospheres : Part 19 IEC 60079-19(2006) Repair, overhaul and reclamation 272 * IS 60079(Part 20):1996 Electrical apparatus for explosive gas IEC 60079-20 (1996) atmospheres : Part 20 Data for flammable gases and vapours relating to the use of electrical apparatus

273 IS 60079(Part 25):2003 Electrical apparatus for explosive gas IEC 60079-25(2003) atmospheres : Part 25 Intrinsically safe systems 274 IS 60127(Part 1):2006 Miniture fuses: Part 1 Definitions for IEC 60127-1(2006) miniature fuses and general requirements for miniature fuse 275 IS 60127(Part 2):2003 Ministure fuses : Part 2 Cartridge fuse IS/IEC 60127-2:2003 links (First Revision) 276 IS 60127(Part 4):2005 Miniature fuses: Part 4 Universal IEC 60127-4(2005) modular fuse Link (UMF) 277 IS 60127(Part 6):1994 Miniature fuses: Part 6 Fuse holders for IEC 60127-6:1994 miniature cartridge fuse links 278 IS 60309(Part 1):2002 Plugs, socket-outlets and couplers for IEC 60309-1(1999) industrial purposes: Part 1 General requirements (first revision)

279 IS 60309(Part 2):2002 Plugs, socket-outlets and couplers for IEC 60309-2(1999) industrial purposes: Part 2 Dimensional interchangeability requirements for pin and contact-tube accessories (first revision)

280 IS 60320(Part 1):2001 Appliance couplers for household and IEC 60320-1(2001) similar general purposes Part 1 General requirements 281 IS 60320(Part 2/Sec Appliance couplers for household and IEC 60320-2-2(1998) 2):1998 similar general purposes part 2-2 Interconnection couplers for household and similar equipment

150

Sl. No. IS Number/ DOC Number Title ISO/IEC 282 IS 60371(Part 3/Sec Specification for insulating materials IS/IEC 60371-3-1:06) 1):2006 based on mica – Part 3: Specification for individual materials – Sheet 1: Commutator separators and materials (First Revision of IS 9299(Part 3/Sec 1)

283 IS 60470:2000 High Voltage Alternating Current IS/IEC 60470:2000 Contactors and Contactor-Based Motor- Starters (superceeding IS 9046:1978 and IS 12661(Part 1):1988

284 IS 60517:1990 Gas insulated metal enclosed IS/IEC 60517:1990 switchgear for rated voltages of 72.5 285 * IS 60519(Part 1):1984 Safety in electro-heat installations: IEC 60519-1:1984 Part 1General requirements [Superseding IS 9080 ( Part 1)]. 286 IS 60519(Part 3):1988 Safety in electroheat installations: IEC 60519-3:1988 Part 3 Particular requirements for induction and conduction heating and induction melting installations [Superseding IS 9080 (Part 3 )].

287 IS 60519(Part 5):1980 Safety in electroheat installation : IEC 60519-5:1980 Part 5 Plasma installations 288 * IS 60519(Part 9):1987 Safety in electroheat installations: IEC 60519-9:1980 Part 9 Particular requirements for high frequency dielectric heating

289 IS 60529:2001 Classification of Degrees of protection IS/IEC 60529:2001 provided by enclosures (IP Code) (Superceding IS 12063:1987) 290 IS 60534(Part 2/Sec Industrial - process control valves - Part IEC 60534-2-3 :1997 3):1997 2/Sec 3 flow capacity test procedures 291 IS 60691:1993 Thermal links - requirements and IEC 60691:1993 application guide 292 IS 60715:1981 Dimensions of Low-voltage swtichgear IS/IEC 60715:1981 and controlgear - Standardized mounting on rails of mechanical support of electrical devices in switchgear and controlgear installations(Superseding IS

293 IS 60730(Part 1):1999 Automatic electrical controls for IEC 60730-1 : 1999 household and similar use: Part 1 General requirements 294 IS 60898(Part 1):2002 Electrical Accessories - circuit breakers IS/IEC 60898-1:2002 for over protection for household and similar installations Part 1 Circuit breakers for a.c. . operation (

295 IS 60898(Part 2):2003 Electrical Accessories - circuit breakers IS/IEC 60898-2:2003 for over protection for household and similar installations Part 2 Circuit breakers for a.c. and d.c. operation

296 IS 60947(Part 1):2004 Low voltage switchgear and controlgear: IS/IEC 60947-1:2004 Part 1 General Rules (Superseding IS 13947(Part 1) (IEC 60947-1(2004))

151

Sl. No. IS Number/ DOC Number Title ISO/IEC 297 IS 60947(Part 2):2003 Low voltage switchgear and controlgear: IS/IEC 60947-2:2003 Part 2 Circuit breakers[Superseding IS 13947( Part 2 ):1993]

298 IS 60947(Part 3):1999 Low voltage switchgear and controlgear IS/IEC 60947-3:1999 : Part 3 Switches, disconnectors, switch-disconnectors and fuse combination units [Superseding IS

299 IS 60947(Part 4/Sec Low-Voltage switchgear and controlgear: ISIEC 60947-4-1:2000 1):2000 Part 4 Contactors and motor starters,Section 1 Electromechanical contactors and motor starters[superseding IS 13947(Part

300 IS 60947(Part 4/Sec Low voltage switchgear and controlgear: ISIEC 60947-4-2:1999 2):1999 Part 4 Contactors and motors starters Section 2 ac Semiconductor Motor Controllers and Starters

301 IS 60947(Part 4/Sec Low voltage switchgear and controlgear ISIEC 60947-4-3:1999 3):1999 :Part 4 Contactors and motor starters Section 3 AC semiconductor controllers and contactors for non-motor loads

302 IS 60947(Part 5/Sec Low-voltage switchgear and ISIEC 60947-5-1:2003 1):2003 controlgear: - Part 5 Control circuit devices and switching elements, Section 1 Electromechanical control circuit

303 IS 61058(Part 1):2001 Switches for Appliances: Part 1 General IS/IEC 61058-1(2000) Requirement (IEC 61058-1) 304 IS 61241(Part 2/Sec Electrical apparatus for use in the IEC 61241-2-3(1994) 3):1994 presence of combustible dust: Part 2 Test methods, Section 3 Method for determining minimum ignition energy of dust/air mixtures

305 IS 61308:1994 High frequency dielectric heating IEC 61308:1994 installations -Test methods for the determination of power output. 306 IS 61508(Part 0):2000 Functional safety of (IEC 61508-0:2005) electrical/electronic/programmable electronic safety - related system - Part 0: Functional Safety

307 IS 61508(Part 1):2000 Functional safety of IEC 61508-1:2000 electrical/electronic/progrtammable elctronic safety - related system - Part 1 General requirement

308 IS 61508(Part 2):2000 Functional safety of (IEC 61508-2:2000) electrical/electronic/programmable electronic safety - related system - Part 2 requirement for electrical/Electronic/programmable electronic safety - related systems

152


309 IS 61508(Part 3):1998 Functional safety of (IEC 61508-3:1998) electrical/electronic/programmable electronic safety - related system - Part 3 software requirements

310 IS 61508(Part 4):1998 Functional safety of (IEC 61508-4:1998) electrical/electronic/programmable electronic safety - related system - Part 4 Definitions and abbreviations

311 IS 61508(Part 5):1998 Functional safety of (IEC 61508-5:1998) electrical/electronic/programmable electronic safety - related system - Part 5 Examples of Methods for the determinations of safety integrity levels

312 IS 61508(Part 6):2000 Functional safety of (IEC 61508-6:2000) electrical/electronic/programmable electronic safety - related system - Part 6 Guidelines on the applications

313 IS 61508(Part 7):2000 Functional safety of IEC 61508-7:2000) electrical/electronic/programmable electronic safety - related system - Part 7 Over view of techniques and

314 IS 61511(Part 1):2003 Functional safety of (IEC 61511-1:2003) electrical/electronic/programmable electronic safety - related system - Part 1 Framework, definitions,System, hardware and software requirements

315 IS 61511(Part 2):2003 Functional safety - safety instrumented IEC 61511-2:2003 systems for the process industry sector Part 2 Guidelines for the 316 IS 61511(Part 3):2003 Functional safety - safety instrumented IEC 61511-3:2003 systems for the process industry sector - Part 3 Guidance for the determination of the required safety

317 IS 61558(Part 1):1997 Safety of power Transformer,power IS/IEC 61558-1(1997) supply units and similar: Part 1 General requirement and test 318 IS 61558(Part 2/Sec Safety of power Transformers, power IS/IEC 61558-2-6(97) 6):1997 supply units and similar: Part 2 particular requirements, Section 6 Safety Isolating transformers for

319 IS 61558(Part 2/Sec Safety of power Transformers, power IS/IEC 61558-2-7(07) 7):2007 supply units and similar part 2-7: Particulars requirements for transformers for toys

320 IS 61683:1999 Photovoltaic systems - Power IEC 61683:1999 conditioners - Procedure for measuring efficiency

153

Sl. No. IS Number/ DOC Number Title ISO/IEC 321 IS 61701:1995 Salt mist corrosion testing of IEC 61701:1995) photovoltaic (PV) modules 322 IS 61724:1998 Photovoltaic system performance IEC 61724:1998 monitoring - Guidelines for measurment, data exchange and analysis 323 IS 61725:1997 Analytical expression for daily solar IS/IEC 61725(1997) 324 IS 61730(Part 2):2004 Photovoltaic (PV) module safety IEC 61730-2:2004) qualification: Part 2 Requirments for testing 325 IS 61829:1995 Crystalline silicon photovoltaic (PV) IEC 61829 : 1995 array - On site measurment of I-V characteristics

326 IS 62264(Part 1):2003 Enterprise control system Integration IEC 62264-1:2003 Part 1 Models and Terminology 327 IS 62264(Part 2):2004 Enterprise control system Integration IEC 62264-2:2004 Part 2 Objects Models Attributes 328 IS 62271(Part 102):2003 High-voltage swithgear and controlgear: IS/IEC62271-102:2003 Part 102 High-voltage alternating

329 IS 62271(Part 105):2002 High-voltage swithgear and controlgear: IS/IEC62271-105:2002 Part 105 Alternating current switch-fuse 330 IS 62271(Part 200):2003 High-voltage switchgear and IS/IEC62271-200:2003 controlgear: Part 200 AC Metal-Enclosed Switchgear and Controlgear for Rated Voltages Above 1 kV and Up To and

331 IS 62271(Part 201):2006 High-voltage switchgear and IS/IEC62271-201:2006 controlgear: Part 201 AC Insulation Enclosed Switchgear and Controlgear for Rated Voltages Above 1 kV and

332 IS 62271(Part 203):2003 High-voltage swithgear and controlgear: ISIEC 62271-203:2003 Part 203 Gas-insulated metal-enlosed switchgear for rated voltages above 52

333 ISQC 160000 : 1988 Electrical relays:Part 1 tests and IECQC 60255-7:1978 measurement procedures for electromechanical all-or-nothing relays

334 ISQC 160000 : 1988 Electrical relays:Part 2 Applications of IECQC 60255-10:1979 the IEC quality assessment systems for electronic components to all-or- nothing relays

335 ISQC 160100 : 1988 Electrical relays, sectional specification: IECQC 160100:1983 Electromechanical all-or-nothing relays

336 ISQC 160101 : 1988 Electrical relays, blank detail IECQC 160101:1993 specification: electromechanical all-or- nothing relays of assessed quality, test

Total : DUAL NUMBER STANDARDS = 336

154


EQUIVALENT STANDARDS 1 IS 302(Part 1):2008 Safety of household and similar IEC 60335-1(2006) electrical appliances: Part 1 General requirements (sixth revision) 2 IS 302(Part 2/Sec Safety of household and similar IEC 60335-2-2(1993) 2):1997 electrical appliances: Part 2 Particular requirements, Section 2 Vacuum cleaners and water suction cleaning appliances

3 IS 302(Part 2/Sec Safety of household and similar electric IEC 60335-2-3(2002) 3):2007 appliances: Part 2 Particular requirements, Sec 3 Electric iron (first 4 IS 302(Part 2/Sec Safety of household and similar IEC 60335-2-4(1984) 4):1993 electrical appliances: Part 2 Particular requirements, Section 4 Spin extractors 5 IS 302(Part 2/Sec Safety of household and similar IEC 60335-2-6(1986) 6):2009 electrical appliances: Part 2 Particuar requirements, Section 6 Cooking ranges, cooking tables, ovens and similar appliances (First Revision)

6 IS 302(Part 2/Sec Safety of household and similar IEC 60335-2-7(1984) 7):2009 electrical appliances: Part 2 Particular requirements, Section 7 Domestic electric clothes washing machines

7 IS 302(Part 2/Sec Safety of household and similar IEC 60335-2-8(1987) 8):1994 electrical appliances: Part 2 Particular requirements, Section 8 Electric shavers, hair clippers and similar appliances

8 IS 302(Part 2/Sec Safety of household and similar IEC 60335-2-9(1986) 9):2009 electrical appliances: Part 2 Particular requirements: Section 9 Electric toasters, grills, roastors and similar appliances (First Revision)

9 IS 302(Part 2/Sec Safety of household and similar IEC 60335-2-11(1976) 11):1994 electrical appliances: Part 2 Particular requirements, Section 11 Tumbler

10 IS 302(Part 2/Sec Safety of household and similar IEC60335-2-12(1987) 12):1993 electrical appliances: Part 2 Particular requirements, Section 12 Warming plates and similar appliances

11 IS 302(Part 2/Sec Safety of household and similar IEC 60335-2-13(1987) 13):1994 electrical appliances :Part 2 particular requirements, Section 13 Frying pans, deep fat fryers and similar appliances

12 IS 302(Part 2/Sec Safety of household and similar IEC 60335-2-14(1984) 14):2009 electrical appliances: Part 2 Particular requirements, Section 14 Electric kitchen machines (First Revision)

13 IS 302(Part 2/Sec Safety of household and similar IEC 60335-2-15(1986) 15):2009 electrical appliances: Part 2 Particular requirements: Section 15 Appliances for heating liquids (First Revision)

155


14 * IS 302(Part 2/Sec Safety of household and similar IEC 60335-2-21(1989) 21):2011 electrical appliances: Part 2 Particular requirements, Section 21 Stationary storage type

15 IS 302(Part 2/Sec Safety of household and similar IEC 60335-2-23(1986) 23):2009 electrical appliances: Part 2 Particular requirements, Section 23 Appliances for skin and hair care (First Revision)

16 IS 302(Part 2/Sec Safety of household and similar IEC 60335-2-24(1992) 24):1994 electrical appliances:Part 2 Particular requirements, Sec 24 Refrigerators, food freezers

17 IS 302(Part 2/Sec Safety of household and similar IEC 60335-2-25(1988) 25):1994 electrical appliances: Part 2 Particular requirements, 18 IS 302(Part 2/Sec Safety of household and similar IEC 60335-2-26(1994) 26):1994 electrical appliances: Part 2 Particular requirements, Section 26 Clocks

19 IS 302(Part 2/Sec Safety of household and similar IEC 60335-2-30(2002) 30):2007 electrical appliances: Part 2 Particular requirements, 20 IS 302(Part 2/Sec Safety of household and similar IEC 60335-2-31 2002) 31):2009 electrical appliances: Part 2 Particular requirements, Section 31 Range Hoods 21 IS 302(Part 2/Sec Safety of household and similar IEC 60335-2-32(1993) 32):1994 electrical appliances: Part 2 Particular requirements: 22 * IS 302(Part 2/Sec Safety of household and similar IEC 60335-2-35(1991) 35):2011 electrical appliances: Part 2 Particular requirements, Section 35 Electric instantaneous water heater(First Revision

23 IS 302(Part 2/Sec Safety of household and similar IEC 60335-2-45(1986) 45):1994 electrical appliances: Part 2 Particular requirements, 24 IS 302(Part 2/Sec Safety of household and similar IEC 60335-2-46(1986) 46):1993 electrical appliances: Part 2 Particular requirements, 25 IS 302(Part 2/Sec Safety of household and similar IEC 60335-2-59(1990) 59):1999 electrical appliances : Part 2 Particular requirements , Section 59 Insect killers 26 IS 302(Part 2/Sec Safety of household and similar IEC 60335-2-76(1997) 76):1999 electrical appliances Part 2 Particular requirements,

27 IS 302(Part 2/Sec Safety of household and similar IEC 60335-2-74(2002) 201):2008 electrical appliances: Part 2 Particular requirements, Section 201 Electric immersion water heaters

28 IS 302(Part 2/Sec Safety of household and similar IEC 60335-2-80 80):2003 electrical appliances: Part 2 Particular requirements, Sec 80 Fans (Superseding IS 12155:1987)

29 IS 325:1996 Three-phase induction motors(first IEC 60034-1(1983) 30 IS 365:1983 Electric hot plates (second revision) IEC 60302-2-6(1982)

156

Sl. No. IS Number/ DOC Number Title ISO/IEC 31 * IS 366:1991 Electric irons (fourth revision) IEC 60311(1988)

32 IS 367:1993 Electric kettles and jugs for household IEC 60530(1975) 33 * IS 369:1992 Electric radiators (third revision) IEC 60675 34 IS 398(Part 1):1996 Aluminium conductors for overhead IEC 60889:1987 transmission purposes: Part 1 Aluminium stranded conductors (third 35 IS 398(Part 2):1996 Aluminium conductors for overhead IEC 889 :1987 transmission purposes: Part 2 Aluminium conductors, galvanized steel reinforced (third revision)

36 IS 398(Part 4):1994 Aluminium conductors for overhead IEC 60208:1966 transmission purposes: Part 4 Aluminium alloy stranded conductors (aluminium magnesium silicon type)

37 IS 418:2004 Tungsten filament lamps for domestic IEC 60064(1993) and similar general lighting purposes (fourth revision)

38 IS 586:1976 Leclanche type dry batteries for telecommunications,signalling and general purposes (third revision) 39 IS 694:1990 PVC Insulated cables for working IEC 60227-1to5:1979 voltages upto and including 1100 V 40 IS 1175:1981 Methods for grading and classification ISO 67 of muscovite mica blocks, thins and films (first revision) 41 IS 1231:1974 Dimensions of three-phase foot- IEC 60072 (1971) mounted induction motors (third 42 IS 1248(Part 1):2003 Direct acting indicating analogue IEC 600 51-1(1997) electrical measuring instruments and their accessories: Part 1 General requirements (fourth revision)

43 IS 1248(Part 2):2003 Direct acting indicating analogue IEC 600 51-2(1984) electrical measuring instruments and their accessories: Part 2 Ammeters and voltmeters (third revision)

44 IS 1248(Part 3):2003 Direct acting indicating analogue IEC 600 51-3(1984) electrical measuring instruments and their accessories: Part 3 Wattmeters and varmeters (third revision)

45 IS 1248(Part 4):2003 Direct acting indicating analogue IEC 600 51-4(1984) electrical measuring instruments and their accessories: Part 4 Frequency meters (third revision)

46 IS 1248(Part 5):2003 Direct acting indicating analogue IEC 600 51-5(1984) electrical measuring instruments and their accessories: Part 5 Phase meters, power factor meters and synchroscope (third revision)

157


47 IS 1248(Part 6):2003 Direct acting indicating analogue IEC 600 51-6(1984) electrical measuring instruments and their accessories: Part 6 Ohmmeters (impedance meters) and conductance meters (third revision)

48 IS 1248(Part 7):2003 Direct acting indicating analogue IEC 600 51-7(1984) electrical measuring instruments and their accessories: Part 7 Multifunction instruments (third revision)

49 IS 1248(Part 8):2003 Direct acting indicating analogue IEC 600 51-8(1984) electrical measuring instruments and their accessories: Part 8 Accessories (third revision)

50 IS 1248(Part 9):2003 Direct acting indicating analogue IEC 600 51-9(1988) electrical measuring instruments and their accessories: Part 9 Test methods (third revision)

51 IS 1258:2005 Bayonet lamp holders (fourth revision) IEC 61184(1997) 52 * IS 1271:1985 Thermal evaluation and classification of IEC 60085:1984 electrical insulation (first revision) 53 IS 1287:1993 Electric toasters (third revision) IEC 60442(1973) 54 IS 1293:2005 Plugs and socket outlets of rated IEC 60884-1 (2002) voltage upto and including 250 volts and rated current upto and including 16 amperes - Specification (third revision)

55 IS 1356(Part 1):1972 Electrical equipment of machine tools: IEC 60204-1 Part 1 Electrical equipment of machines 56 IS 1534(Part 1):1977 Ballasts for fluorescent lamps: IEC 82(1973) Part 1 For switch start circuits (second revision) 57 IS 1554(Part 1):1988 PVC insulated (heavy duty) electric IEC 60502:1983 cables: Part 1 For working voltages upto and including 1 100 V (third revision)

58 IS 1554(Part 2):1988 PVC insulated (heavy duty) electric IEC 60502:1983 cables:Part 2 For working voltages from 3.3kV upto and including 11 kV (Second revision)

59 IS 1569:1976 Capacitors for use in tubular fluorescent IEC 566 high pressure mercury and low pressure sodium vapour discharge lamp circuits ( first revision)

60 IS 1709:1984 Capacitors for electric fan motors (first IEC 252:1975 revision) 61 IS 1765:1980 Direct current potentiometers (second IEC 60523:1975 revision) 62 IS 1766:1998 Time swtiches for metering and load IEC 61038:1992 control (second revision) 63 IS 1851:1997 Single Operator type arc welding ISO 700:1982 transformers (third revision)

158

Sl. No. IS Number/ DOC Number Title ISO/IEC 64 IS 1866:2000 Code of practice for maintenance and IEC 60296(1982) supervision of mineral insulating oil in equipment (third revision)

65 IS 2016(Part 2):2010 Power Transformers - Part 2 Temperature rise (first revision) 66 * IS 2026(Part 1):1977 Power transformers: Part 1 General IEC 60076(1977) (first revision)

67 IS 2026(Part 4):1977 Power transformers: Part 4 Terminal IEC 60076(1977) marking,tappings and connections (first revision) 68 * IS 2026(Part 5):1994 Power Transformer: Part 5 IEC 60076-3-1(1987) Transformer/Reactor bushings minimum external clearance in air -

69 * IS 2082:1993 Stationary storage type electric water IEC 60379(1982) heaters (third revision) 70 ** IS 2165(Part 1):1977 Insulation coordination: IEC 60071-1:1976 Part 1 Phase to earth insulation coordination principles and rules (second revision)

71 ** IS 2165(Part 2):1983 Insulation coordination: Part 2 Phase to IEC 60071-3:1982 phase insulation coordination principles and rules

72 IS 2215:2006 Starters for fluorescent lamps (third IEC 60155 (1993) revision) 73 IS 2223:1983 Dimensions of flange mounted ac IEC 60072 (1971) induction motors (first revision) 74 IS 2253:1974 Designation for types of construction IEC 34-7(1972) and mounting arrangement of rotating electrical machines (first revision)

75 IS 2259:1963 Methods of test for determination of IEC 60167(1964) insulation resistance of solid insulating materials 76 IS 2312:1967 Propeller type ac ventilating fans (first IEC 60665(1981) revision) 77 IS 2418(Part 1):1977 Tubular fluorescent lamps for general IEC 81(1974) lighting service: Part 1 Requirements and tests (first revision)

78 IS 2418(Part 2):1977 Tubular fluorescent lamps for general IEC 81(1974) lighting service : Part 2 Standard lamp data sheets (first revision)

79 IS 2418(Part 3):1977 Tubular fluorescent lamps for general IEC 61-1(1969) lighting service : Part 3 Dimensions of G-5and G-13 bi-pin caps (first revision) 80 IS 2418(Part 4):1977 Tubular fluorescent lamps for general IEC 61-3(1969) lighting service: Part 4 Go and no-go gauges for G-5 and G-13 bi-pin caps (first revision)

159

Sl. No. IS Number/ DOC Number Title ISO/IEC 81 IS 2419:1979 Dimensions for panel mounted IEC 60473(74) indicating and recording electrical instruments (first revision)

82 IS 2486(Part 2):1989 Insulator fittings for overhead power IEC 120 (1984) lines with nominal voltage greater than1000 V - Specification : Part 2 Dimensional requirements (second revision)

83 IS 2486(Part 3):1974 Specification for Insulator fittings for IEC 372-1 (1971) overhead power lines with a nominal voltage greter than 1 000 Volts: Part 3 Locking devices

84 IS 2486(Part 4):1981 Specification for Insulator fittings for IEC 372-2 (1976) overhead power lines with a nominal voltage greater than1 000 V: Part 4 Test for locking devices

85 IS 2511:1963 Specification for Polycrystalline IEC 60119(1960) semiconductor rectifier stacks 86 IS 2544:1973 Porcelain post insulators for systems IEC 168 (1964) with nominal voltage greater than 1000 Volts (first revision) 87 IS 2705(Part 1):1992 Current transformers: Part 1 General IEC 60185(1966) requirements (second revision)

88 IS 2705(Part 2):1992 Current transformers: Part 2 Measuring IEC 60185(1966) current transformers (second revision) 89 IS 2705(Part 3):1992 Current transformers: Part 3 Protective IEC 60185(1966) current transformers (second revision) 90 IS 2705(Part 4):1992 Current transformers: Part 4 Protective IEC 60185(1966) current transformers for special purpose applications (second revision)

91 IS 3017:1985 Thermostats for use with electric water IEC 60730(1982) heaters (first revision) 92 * IS 3070(Part 3):1993 Lightning arresters for alternating IEC 60099-4:1991 current systems :Part 3 Metal oxide surge- arresters without gaps for ac systems

93 IS 3136:1965 Specification for Polycrystalline IEC 60119(1960) semiconductor rectifier equipment 94 IS 3151:1982 Earthing transformers (first revision) IEC 60289(1968) 95 IS 3156(Part 1):1992 Voltage transformers: Part 1 General IEC 60186(1987) requirements (second revision) 96 IS 3156(Part 2):1992 Voltage transformers: Part 2 Measuring IEC 60186(1987) voltage transformers (second revision) 97 IS 3156(Part 3):1992 Voltage transformers: Part 3 Protective IEC 60186(1987) voltage transformers (second revision) 98 IS 3156(Part 4):1992 Voltage transformers: Part 4 Capacitor IEC 60186(1987) voltage transformers (second revision)

160

Sl. No. IS Number/ DOC Number Title ISO/IEC 99 IS 3231(Part 1/Sec Electrical relays for power system IEC 255-4 (1976) 3):1986 protection: Part 1 General requirements, Section 3 High frequency disturbance test for static relays (first revision)

100 IS 3231(Part 2/Sec Electrical relays for power system IEC 255-1-00 1):1987 protection: Part 2 Requirements for principal families, Section 1 All or nothing relays

101 IS 3231(Part 2/Sec Electrical relays for power system IEC 255-8 (1978) 3):1987 protection: Part 2 Requirements for principal families, Section 3 General requirements for thermal relays

102 IS 3231(Part 3/Sec Electrical relays for power system IEC 255-3 (1971) 1):1987 protection: Part 3 Requirements for particular group of relays, Section 1 Non-specified time or independent specified time measuring relays

103 IS 3231(Part 3/Sec Electrical relays for power system IEC 255-4 (1976) 2):1987 protection: Part 3 Requirements for particular group of relays, Section 2 Dependent specified time measuring

104 IS 3231(Part 3/Sec Electrical relays for power system IEC 255-13(1980) 3):1987 protection:Part 3 Requirements for particular group of relays, Section 3 Biased (percentage) differential relays

105 IS 3231(Part 3/Sec Electrical relays for power system IEC 255-12 (1980) 4):1987 protection: Part 3 Requirements for particular group of relays, Section 4 Directional relays and power relays

106 IS 3231(Part 3/Sec Electrical relays for power system IEC255-16 (1982) 5):1987 Protection: Part 3 Requirements for particular group of relays, Section 5 Impedance measuring relays

107 IS 3323:1980 Bi-pin lampholders for tubular IEC 60400(1972) fluorescent lamps (first revision) 108 IS 3324:1982 Holders for starters for tubular IEC 400(1972) fluorescent lamps (first revision) 109 * IS 3716:1978 Application guide for insulation IEC 60071-2:1976 coordination (first revision) 110 IS 3722(Part 1):1983 Letter symbols and signs used in IEC 60027-1(1992) electrical technology: Part 1 General guidance on symbols and subscripts (first revision)

111 IS 3722(Part 2):1983 Letter symbols and signs used in IEC 60273-1(92) electrical technology: Part 2 Reference tables for symbols and subscripts (first revision)

161

Sl. No. IS Number/ DOC Number Title ISO/IEC 112 * IS 3854:1997 Switches for domestic and similar IEC 60669-1(1998) purposes (second revision) 113 IS 3895:1966 Specification for Monocrystalline IEC 60146(1963) semiconductor rectifier cells and stacks 114 IS 4029:2010 Guide for testing three-phase induction motors (First Revision) 115 IS 4159:2002 Mineral filled sheathed heating elements IEC 60335-2-73(1994) 116 IS 4160:2005 Interlocking switch socket outlets - IEC 60884-2-6 (1997) Speification (first revision) 117 IS 4165:1991 Thermostats for general purpose electric IEC 60730(1982) ovens (first revision)

118 IS 4289(Part 1):1984 Flexible cables for lifts and other IEC 60245-5 flexible connections: Part 1 Elastomer insulated cables (first revision)

119 IS 4289(Part 2):2000 Flexible cables for lifts and other IEC 60227-6:1985 flexible Connections:Part 2 PVC 120 IS 4540:1968 Specification for Monocrystalline IEC 60146(1963) semiconductor rectifier assemblies and equipment 121 IS 4559:1993 Single operator rectifier type dc arc ISO 700:1982 welding power source (second revision) 122 IS 4889:1968 Method of determination of efficiency IEC 2 D of rotating electrical machines 123 IS 5154:1980 Lead-acid traction batteries (first IEC 254(1967) 124 IS 5350(Part 1):1970 Dimensions of indoor and outdoor IEC 273 (1968) porcelain post insulator and post insulator units for system with nominal voltage greater than 1000 V: Part 1 Indoor post insulators

125 IS 5350(Part 3):1971 Dimensions of indoor and outdoor IEC 273 (1968) porcelain post insulators and post insulator units for system with nominal voltages greater than 1000 V: Part 3 Outdoor pedestal post insulators

126 IS 5422:1996 Turbine type generators (first revision) IEC 60034-3(1988) 127 IS 5553(Part 1):1989 Reactors: Part 1 General IEC 60289(1988) 128 IS 5553(Part 2):1990 Reactors: Part 2 Shunt reactors IEC 60 289(1988) 129 IS 5553(Part 3):1990 Reactors: Part 3 Current limiting IEC 60289(1988) reactors and neutral earthing reactors 130 IS 5553(Part 4):1990 Reactors: Part 4 Damping reactors IEC 60289(1988) 131 IS 5553(Part 5):1989 Reactors: Part 5 Tuning reactors IEC 60289(1988) 132 IS 5553(Part 6):1991 Reactors: Part 6 Earthing transformers IEC 60289(1988) (Neutral couplers) 133 IS 5553(Part 7):1990 Reactors: Part 7 Arc supression IEC 60289(1988) 134 IS 5553(Part 8):1990 Reactors: Part 8 Smoothing reactors IEC 60289(1988)

162

Sl. No. IS Number/ DOC Number Title ISO/IEC 135 IS 5571:2009 Guide for selection and installation of IEC 60079-14(2002) electrical equipment in hazardous areas (other than mines (third revision)

136 IS 5572:2009 Classification of hazardous areas (other IEC 60079-10(2002) than mines) having flammable gases and vapours for electrical installation (third revision of IS 5572)

137 IS 5578:1984 Guide for marking of insulated IEC 60391(1972) conductors (first revision) 138 IS 5790:1985 Domestic electric cooking ovens (first IEC 60350 revision) 139 IS 5831:1984 PVC insulation and sheath of electric IEC 60502:1983 cables (first revision) 140 IS 6008:1989 Single operator ac/dc arc welding IEC 700:1982 power source (first revision) 141 IS 6162(Part 1):1971 Paper covered aluminium conductors : IEC 60111 Part 1 Round conductors 142 IS 6162(Part 2):1971 Paper covered aluminium IEC 60111 conductors:Part 2 Rectangular 143 IS 6236:1971 Direct recording electrical measuring IEC 60258(1968) instruments 144 IS 6290:1986 Steam irons (first revision) IEC 60311(1970) 145 * IS 6303:1984 General requirements and methods of IEC 86-1(1972) tests for dry cells and batteries 146 IS 6380:1984 Elastomeric insulation and sheath of IEC 60502:1983 electric cables (first revison) 147 IS 6616:1982 Ballasts for high pressure mercury IEC 262(1969) vapour lamps (first revision) 148 IS 6680:1992 Railway carriage fans (first revision) IEC 60342-1 149 IS 6701:1985 Tungsten filament miscellaneous IEC 61-1(1969) electric lamps(first revision) 150 IS 6792:1992 Method for determination of electric IEC 60156(1963) strength of insulating oils (first revision)

151 IS 6848:1979 Lead-acid batteries for train lighting and IEC 77(1968) airconditioning services (first revision) 152 IS 7027:1984 Transistorized ballasts for fluorescent IEC 452(1982) lamps (first revision)

153 IS 7098(Part 1):1988 Cross-linked polyethylene insulated IEC 60502:1983 thermosplastic sheathed cables - Specification : Part 1 For working voltages upto and including 1 100 V

154 IS 7098(Part 2):1985 Crosslinked polyethylene insulated PVC IEC 60502:1983 sheathed cables: Part 2 For working voltages from 3.3 kV upto and including 33 kV (first revision)

155 IS 7132:1973 Guide for testing synchronous IEC 60034-1(1969)

163

Sl. No. IS Number/ DOC Number Title ISO/IEC 156 IS 7204(Part 2):1980 Specification for Stabilized power IEC 60478-2(1975) supplies dc output: Part 2 Rating and performance . 157 IS 7204(Part 3):1980 Specification for Stabilized power IEC 60478-3(1976) supplies dc output: Part 3 Radio frequency interference tests

158 IS 7204(Part 4):1980 Specification for Stabilized power IEC 60478-4(1976) supplies dc output: Part 4 Tests other than radio-frequency interference. 159 IS 7306:1974 Methods for determining synchronous IEC 60034-4(1967) machine quantities from tests 160 IS 7372:1995 Lead-acid storage batteries for motor IEC 95-1(1988) vehicles (first revision) 161 IS 7391(Part 1):1974 Cotton covered copper conductors : IEC 60182 Part 1 Round conductors 162 IS 7576:1974 Bunched enamelled copper conductors IEC 60317-1 with silk covering 163 IS 7624:1990 Lead-acid starter batteries for diesel IEC 95-1(1980) locomotives and rail cars (first revision) 164 * IS 7691:1975 Frequencies for special power IEC 600113-1(71) 165 IS 7788:1975 Specification for Single-phase traction IEC 60411(1973) power converters 166 * IS 7809(Part 1):1975 Pressure sensitive adhesive tapes for IEC 60454-1(1974) electrical purposes: Part 1 General requirements

167 IS 7809(Part 2):1977 Pressure sensitive adhesive tapes for IEC 60454-2(1974) electrical purposes: Part 2 Methods of 168 IS 7809(Part 3/Sec Pressure sensitive adhesive tapes for IEC 60454-2 1):1986 electrical purposes: Part 3 Requirements for individual materials, Section 1 Plasticized polyvinylchloride tapes with non-thermosetting adhesive

169 IS 7914:1975 Standard cells IEC 60428(1973) 170 IS 8030:1976 Luminaires for hospitals IEC 162(1972) 171 * IS 8130:1984 Conductors for insulated electric cables IEC 60228:1978 and flexible cords (first revision) 172 * IS 8144:1997 Multipurpose dry batteries (First revision) IEC 86-2(1972) 173 IS 8187:1976 D-type fuses IEC 269-3(1973) 174 IS 8223:1999 Dimensions and output series for IEC 60072-2(1990) rotating electrical machines (first

175 IS 8270(Part 1):1976 Guide for preparation of diagrams, IEC 60113-1(71) charts and tables for electrotechnology: Part 1 Definitions and classification

176 IS 8270(Part 2):1976 Guide for preparation of diagrams, IEC 60113-2(71) charts and tables for electrotechnology: Part 2 Item designation 177 IS 8270(Part 3):1977 Guide for preparation of diagrams, IEC 60113-2(71) charts and tables for electrotechnology: Part 3 General requirements for

164

Sl. No. IS Number/ DOC Number Title ISO/IEC 178 IS 8270(Part 4):1977 Guide for preparation of diagrams, IEC 60113-2(71) charts and tables for electrotechnology: Part 4 Circuit diagrams

179 IS 8270(Part 5):1976 Guide for preparation of diagrams, IEC 60113-2(71) charts and tables for electrotechnology: Part 5 Interconnection diagrams and 180 IS 8270(Part 6):1983 Guide for preparation of diagrams, IEC 60113-2(71) charts and tables for electrotechnology: Part 6 Unit wiring diagrams and tables 181 * IS 8504(Part 2):1983 Guide for determination of thermal IEC 60216-2(1974) endurance properties of electrical insulating materials: Part 2 List of materials and available tests

182 IS 8504(Part 3):1994 Guide for determination of thermal IEC 60216-3 endurance properties of electrical insulating materials: Part 3 Statistical methods 183 * IS 8504(Part 4):1994 Guide for determination of thermal IEC 60216-3 endurance properties of electrical insulating materials: Part 4 Instructions for calculating the thermal endurance

184 IS 8530:1977 Maximum demand indicators (class 1) IEC 60211:1966 185 IS 8685:1977 Aircraft lamps IEC 60434 (1973) 186 IS 8686:1977 Static protective relays IEC 255-4 187 IS 8704:1995 Artificial pollution on high voltage IEC 507 (1991) insulators to be used on ac systems 188 IS 8804:1993 Plugs, sockets and terminal IEC 501:1975 arrangements and welding cable connectors for

189 IS 8913:1978 Methods of measurement of lamp cap IEC 360(1971) temperature rise 190 IS 8992:1978 Test methods for induction furnaces IEC 60396(1972) with submerged channels 191 IS 9021:1978 General test conditions for industrial IEC 60398(1972) electro-heating equipment 192 IS 9029:1978 Methods of tests for batch furnaces IEC 60397(1972) with 193 IS 9043:1979 Method for grading (by size) of ISO 444(1965) phlogopite mica blocks, thins and 194 IS 9044:1979 Method of measuring thickness of mica ISO 5972(1978) blocks, thins, films and splittings 195 IS 9045:1979 Thermal classification of phlogopite ISO 5023(1977) mica splittings

196 ** IS 9050:1979 Nominal dimensions of cylindrical IEC 60239(1967) machines graphite electrodes with threaded sockets and connecting pins for use in electric arc furnaces.

165

Sl. No. IS Number/ DOC Number Title ISO/IEC 197 ** IS 9080(Part 2/Sec Safety requirements in electro-heat IEC 60519-2(1975) 1):1979 installations:Part 2 Particular requirements for resistance heating equipment, Section 1 Protection in direct resistance heating installations

198 ** IS 9080(Part 2/Sec Safety requirements in electro-heat IEC 60519-2(1975) 3):1981 installations: Part 2 Particular requirements for resistance heating equipment, Section 3 Protection in potassium and sodium nitrate and nitrite bath furnaces

199 ** IS 9080(Part 2/Sec Safety requirements in electro-heat IEC 60519-2(1975) 4):1981 installations: Part 2 Particular requirements for resistance heating equipment, Section 4 Protection in installations used for drying varnishes and other similar

200 ** IS 9080(Part 4):1981 Safety requirements in electro-heat IEC 60519-4(1977) installations: Part 4 Particular requirements for arc furnace installations.

201 IS 9206:1979 Dimensions of caps for tungsten IEC 60061-1(1972) filament 202 IS 9249(Part 1):1979 Safety requirements for indicating and IEC 60414(1973) recording electrical measuring instruments and their accessories: Part 1 Common safety requirements for

203 IS 9249(Part 2):1982 Safety requirements for indicating and IEC 60414((1973) recording electrical measuring instruments and their accessories: Part 2 Safety requirements for instruments using a mains supply

204 IS 9251:1979 Capacitors for inductive heat generating IEC 60110:1973 plants operating at frequencies between 40 and 24 000 Hz 205 * IS 9299(Part 1):1979 Insulating materials based on built-up IEC 60371-1(1972) mica or treated mica paper: Part 1 Definitions and general requirements 206 * IS 9299(Part 2):1992 Insulating materials based on built-up IEC 60371-2(1987) mica or treated mica paper: Part 2 Methods of test (first revision) 207 * IS 9299(Part 3/Sec Insulating materials based on built-up IEC 60371-3-1(1973) 1):1979 mica or treated mica paper: Part 3 Specifications for individual materials, Section 1 Rigid mica material for

208 IS 9335(Part 1):1979 Cellulosic papers for electrical IEC 60554-1(1977) purposes: Part 1 Definitions and general 209 IS 9335(Part 3/Sec Cellulosic papers for electrical IEC 60554-3-1 1):1984 purposes: Part 3 Specifications for individual materials, Section 1 General purposes electrical paper

210 IS 9335(Part 3/Sec Cellulosic papers for electrical IEC 60554-3-2 2):1985 purposes: Part 3 Specifications for individual materials, Section 2 Capacitor

166

Sl. No. IS Number/ DOC Number Title ISO/IEC 211 IS 9335(Part 3/Sec Cellulosic papers for electrical IEC 60554-3-3(1980) 3):1984 purposes: Part 3 Specifications for individual materials, Section 3 Crepe

212 IS 9335(Part 3/Sec Cellulosic papers for electrical IEC 60554-3-4(1979) 4):1984 purposes: Part 3 Specifications for individual materials, Section 4 Electrolytic capacitor paper

213 IS 9335(Part 3/Sec Cellulosic papers for electrical IEC 60554-3-5 5):1985 purposes: Part 3 Specifications for individual materials, Section 5 Special 214 IS 9385(Part 1):1979 High voltage fuses:Part 1 Current IEC 282-1(1979) limiting fuses 215 IS 9385(Part 2):1980 High voltage fuses:Part 2 Expulsion and IEC 282-2(1970) similar fuses (superseding IS:5792) 216 IS 9385(Part 3):1980 High voltage fuses:Part 3 Application IEC 282-2(1970) guide for high voltage fuses 217 IS 9385(Part 5):1983 High voltage fuses:Part 5 Types and IEC 282-1A(1978) dimensions of fuse-links for current limiting fuses 218 IS 9402:1980 High voltage fuses for the external IEC 549(1976) protection of shunt power capacitors 219 IS 9409:1980 Classification of electrical and IEC 61140 (2001) electronic equipment with regard to protection against electric shock 220 IS 9434:1992 Guide for sampling and analysis of free IEC 60567(1977) and dissolved gases and oil from oil- filled electrical equipment (first revision) 221 IS 9499:1980 Conventions concerning electric and IEC 60375(72)2003 magnetic circuits 222 IS 9502:1980 Muscovite mica components for ISO 5816-1(1979) electronic equipment 223 * IS 9537(Part 1):1980 Conduits for electrical installations: Part IEC 60614-1(1978) 1 General requirements 224 ** IS 9537(Part 3):1983 Conduits for electrical installations: Part IEC 60614-2-2(1980) 3 Rigid plain conduits of insulating materials (superseding IS:2509) 225 * IS 9537(Part 5):2000 Conduits for a electrical installations: IEC 60614-2-3(1990) Part 5 Pliable conduits of insulating material (Superseding IS 6946) 226 IS 9537(Part 6):2000 Conduit for electrical installations: Part IEC 60614-2-6(1992) 6 Pliable conduits of metal or composit materials 227 * IS 9570:1980 Classification of flammable gases or IEC 60079-12 (1978) vapours with air according to their maximum experimental safe gaps and minimum igniting currents

228 IS 9583:1981 Emergency lighting units IEC 598-2-22(1980) 229 IS 9857:1990 Welding cables (first revision) IEC 60245-6

167

Sl. No. IS Number/ DOC Number Title ISO/IEC 230 IS 9900(Part 1):1981 High pressure mercury vapour lamps: IEC 188(1974) Part 1 Requirements and test (Superseding IS:2183 and IS:7023)

231 IS 9900(Part 2):1981 High pressure mercury vapour lamps: IEC 188(1974) Part 2 Standard lamp data sheets (superseding IS: 2183 and IS: 7023) 232 IS 9900(Part 3):1981 High pressure mercury vapour lamps : IEC 188(1974) Part 3 Dimensions of lamp caps (superseding IS:2183 and IS:7023)

233 IS 9900(Part 4):1981 High pressure mercury vapour lamps : IEC 61-3(1969) Part 4 Go and no-go gauges of lamp caps 234 * IS 9920(Part 3):1982 Switches and switch isolators for IEC 60129:1975 voltages above 1000 V: Part 3 Design and construction 235 * IS 9920(Part 4):1985 Switches and switch isolators for IEC 60129:1975 voltages above 1000 V: Part 4 Type tests and routine tests 236 * IS 9921(Part 1):1981 Alternating current disconnectors IEC 60129:1975 (isolators) and earthing switches for voltages above 1000 V: Part 1 General and definitions 237 * IS 9921(Part 2):1982 Alternating current disconnectors IEC 60129:1975 (isolators) and earthing switches for voltages above 1000 V: Part 2 Rating 238 * IS 9921(Part 3):1982 Alternating current disconnectors IEC 60129:1975 (isolators and earthing switches for voltages above 1 000 V: Part 3 Design and construction 239 * IS 9921(Part 4):1985 Alternating current disconnectors IEC 60129:1975 (isolators) and earthing switches for voltages above 1000 V: Part 4 Type tests and routine tests 240 * IS 9921(Part 5):1985 Alternating current disconnectors IEC 60129:1975 (isolators) and earthing switches for voltages above 1 000 V: Part 5 Informations to be given with tenders, inquiries and orders

241 IS 9974(Part 1):1981 High pressure sodium vapour lamps : IEC 662(1980) Part 1 General requirements and tests 242 IS 9974(Part 2):1981 High pressure sodium vapour lamps : IEC 662(1980) Part 2 Standard lamp data sheets 243 * IS 10026(Part 1):1998 Insulating varnishes containing IEC 60464-1(1976) solvents: Part 1 Definitions and general requirements (first revision) 244 * IS 10026(Part 2):1999 Insulating varnishes containing IEC 60464-2(19860 solvents: Part 2 Methods of tests(first

168

Sl. No. IS Number/ DOC Number Title ISO/IEC 245 * IS 10026(Part 3/Sec Insulating varnishes containing IEC 60464-3-1(1986) 1):1999 solvents: Part 3 Specifications for individual materials, Section1Requirements for cold curing varnishes

246 * IS 10026(Part 3/Sec Insulating varnishes containing IEC 60464-3-2(1989) 2):1999 solvents: Part 3 Specifications for individual materials, Section 2 Requirements for hot curing varnishes (first revision)

247 IS 10031:1981 Taper barrelled delivery spools for IEC 60264-3(1973) covered round electrical winding wires

248 IS 10098:1982 General requirements for electric IEC 60240(1967) infra-red emitters for heating 249 ** IS 10122:1982 Methods of tests for crucible induction IEC 60545(1979) furnaces 250 IS 10163(Part 1):1982 Recommended methods of tests for IEC 60377-1(1973) the determination of dielectric properties of insulating materials at frequencies above 300 MHz: Part 1 General

251 * IS 10189(Part 2/Sec Industrial process control valves: Part 2 IEC 60534-2-1(1978) 1):1993 Flow capacity, Section 1 Sizing equations for incompressible fluid flow under installed conditions

252 ** IS 10189(Part 2/Sec Industrial process control valves: Part 2 IEC60534-2-2(1980) 2):1993 Flow capacity SectIon 2 Sizing equations for compressible fluid flow under installed conditions 253 ** IS 10215:1982 Methods of tests for submerged arc IEC 60683(1980) furnaces 254 IS 10242(Part 1/Sec Electrical installations in ships: Part 1 IEC 60092-101:1980 1):1997 General, Section 1 Definitions and general requirements (first revision) 255 * IS 10242(Part 2/Sec Electrical installations in ships: Part 2 IEC 60092-201:1980 1):1982 System design, Section 1 General 256 IS 10242(Part 2/Sec Electrical installations in ships: Part 2 IEC 60092-202:1980 2):1983 System design, Section 2 Protection 257 IS 10242(Part 2/Sec Electrical installations in ships: Part 2 IEC 60092-204:1987 4):1993 System design, Sec 4 Electric and electrohydraulic steering gear 258 IS 10242(Part 3/Sec Electrical installations in ships: Part 3 IEC 60092-301:1980 1):1983 Equipment, Section 1 Generators and motors 259 IS 10242(Part 3/Sec Electrical installations in ships: Part 3 IEC 60092-302:1980 2):1984 Equipment, Section 2 Switchgear and controlgear assemblies 260 IS 10242(Part 3/Sec Electrical installations in ships: Part 3 IEC 60092-303:1980 3):1984 Equipment, Section 3 Transformers for power and lighting

169


261 IS 10242(Part 3/Sec Electrical installations in ships: Part 3 IEC 60092-304:1980 4):1987 Equipment, Section 4 Semi-conductor convertors 262 IS 10242(Part 3/Sec Electrical installations inn ships: Part 3 IEC 60092-305:1980 5):1990 Equipment, Section 5 Accumulators (storage) batteries

263 IS 10242(Part 3/Sec Electrical installations in ships: Part 3 IEC 60092-306:1980 6):1986 Equipment, Section 6 Luminaires and accessories 264 IS 10242(Part 3/Sec Electrical installations in ships:Part 3 IEC 60092-307:1980 7):1990 Equipment, Section 7 Heating and cooking appliances 265 IS 10242(Part 3/Sec Electrical installations in ships: Part 3 IEC 60092-350 10):1992 Equipment, Section 10 General construction and test requirements for low voltage shipboard power cables

266 IS 10242(Part 3/Sec Electrical installations in ships: Part 3 IEC 60092-35:1983 11):1986 Equipment, Section 11 Insulating materials for shipboard power cables

267 IS 10242(Part 3/Sec Electrical installations in ships: Part 3 IEC 60092-352:1979 12):1986 Equipment, Section 12 Choice and installation of cables for low voltage systems

268 IS 10242(Part 3/Sec Electrical installations in ships: Part 3 IEC 60092-353:1988 13):1992 Equipment, Section 13 Single and multicore cables with extruded solid insulation for rated voltage 0.6/1 kV

269 IS 10242(Part 3/Sec Electrical installations in ships: Part 3 IEC 60092-359:1987 19):1990 Equipment, Section 19 Sheathing materials for telecommunication and power shipboard cables

270 IS 10242(Part 3/Sec Electrical installations in ships: Part 3 IEC 60092-373:1977 23):1987 Equipment, Section 23 Shipboard telecommunication cables and radio frequency cables: Shipboard flexible coaxial cables

271 IS 10242(Part 3/Sec Electrical installations in ships: Part 3 IEC 60092-374:1977 24):1987 Equipment, Section 24 Shipboard telecommunication cables and radiofrequency cables: Telephone cables for non-essential communication

272 IS 10242(Part 3/Sec Electrical installations in ships: Part 3 IEC 60092-375:1977 25):1987 Equipment, Section 25 Shipboard telecommunication cables and radio frequency cables: General instrumentation, control and

273 IS 10242(Part 3/Sec Electrical installations in ships: Part 3 IEC 60092-376:1983 26):1987 Equipment, Section 26 Shipboard telecommunication cables: Shipboard multicore cables for control circuits

170

Sl. No. IS Number/ DOC Number Title ISO/IEC 274 IS 10242(Part 4):1992 Electrical installations in ships: Part 4 IEC 60092-401:1980 Installation and test of completed installation

275 IS 10242(Part 5/Sec Electrical installations in ships: Part 5 IEC 60092-501:1984 1):1993 Special features, Sec 1 Electric propulsion plant 276 * IS 10242(Part 5/Sec Electrical installations in ships: Part 5 IEC 60092-502:1999 2):1997 Special features, Section 2 Tankers 277 IS 10242(Part 5/Sec Electrical installations in ships: Part 5 IEC 60092-503:1975 3):1993 Special features Sec 3 ac supply system with voltage in the range above 1 kV up to and including 11 kV

278 IS 10242(Part 5/Sec Electrical installations in ships : Part 5 IEC 60092-504:2001 4):1998 Special features, Section 4 Control and instruments 279 IS 10276(Part 1):1982 Edison screw lampholders : IEC 60238(1975) Part 1 Requirements and tests 280 IS 10276(Part 2):1982 Edison screw lampholders : IEC 60238(1975) Part 2 Standard data sheets for lamp holders and gauges 281 * IS 10322(Part 1):1982 Luminaires: Part 1 General requirements IEC 598-1(1979) 282 IS 10322(Part 2):1982 Luminaires: Part 2 Constructional IEC 598-1(1979) requirements 283 IS 10322(Part 4):1984 Luminaires: Part 4 Methods of tests IEC 598-1(1979) 284 IS 10322(Part 5/Sec Luminaires: Part 5 Particular IEC 60598-2-1(1979) 1):1985 requirements,

285 IS 10322(Part 5/Sec Luminaires: Part 5 Particular IEC 60598-2-2(1979) 2):1985 requirements, 286 IS 10322(Part 5/Sec Luminaires:Part 5 Particular IEC 60598-2-3(1979) 3):1987 requirements, Section 3 Luminaires for road and street 287 IS 10322(Part 5/Sec Luminaires: Part 5 Particular IEC 60598-2-4(1979) 4):1987 requirements, Section 4 Portable general purpose 288 IS 10322(Part 5/Sec Luminaires: Part 5 Particular IEC 60598-2-5 5):1987 requirements, Section 5 Flood lights (superseding

289 IS 10436:1983 Electric frying pans and deep fat fryers IEC 60335-2-13 290 IS 10462(Part 1):1983 Fictitious calculation method for IEC 60502:1978 determination of dimensions of protective coverings of cables:Part 1 Elastomeric and thermoplastic insulated

291 IS 10462(Part 2):1991 Fictitious calculation method for IEC 60055-2 determination of dimensions of protective coverings of cables: Part 2 Paper insulated cables

292 IS 10561:1983 Application guide for power transformers IEC 606 (1978)

171

Sl. No. IS Number/ DOC Number Title ISO/IEC 293 IS 10581:1983 Methods of test for determination of IEC 60589(1977) ionic impurities in electrical insulating materials by extraction with liquids 294 IS 10624:1983 High voltage fuse-links for motor circuit IEC 644(1979) applications 295 IS 10659:1983 Specification for Direct current bridges IEC 60564(1977) for measuring resistance (superseding IS:1565) 296 IS 10918:1984 Vented type nickel cadmium batteries IEC 623(1978) 297 * IS 11064:1984 Guide for construction and use of IEC 60079-13(1982) rooms or buildings protected by pressurization for installation of electrical apparatus for explosive gas

298 IS 11171:1985 Dry type power transformers IEC 60726(1982) 299 IS 11182(Part 1):1984 Guide for evaluation of insulation IEC 60505(1975) systems of electrical equipment: Part 1 Identification, evaluation and ageing mechanisms

300 IS 11182(Part 2):1984 Guide for evaluation of insulation IEC 60611(1978) systems of electrical equipment: Part 2 Thermal endurance test procedure 301 IS 11182(Part 3/Sec Guide for evaluation of insulation IEC 60727-1(1982) 1):1986 systems of electrical equipment: Part 3 Electrical endurance test procedures, Section 1 General considerations and evaluation procedures based on normal

302 IS 11182(Part 3/Sec Guide for evaluation of insulation IEC 60727-2(1993) 2):1996 systems of electrical equipments: Part 3 Electrical endurance test procedures Section 2 evaluation procedure based on extreme value distribution

303 IS 11221:1984 Recommended test methods for IEC 60343(1970) determining the relative resistance of insulating materials to breakdown by surface discharges

304 IS 11256(Part 1):1985 Method of test for determination of IEC 60370(1971) thermal endurance of insulating varnishes: Part 1 Electric strength 305 IS 11256(Part 3):1985 Methods of test for determination of IEC 60290(1969) thermal endurance of insulating varnishes: Part 3 Bond strength by 306 IS 11260(Part 1):1985 Specification for Stabilized power IEC 60686(1980) supplies ac output: Part 1Ratings and performance . 307 IS 11260(Part 2):1985 Specification for Stabilized power IEC 60686 (1980) supplies ac output: Part 2 Tests 308 IS 11298(Part 1):1985 Plastic films for electrical purposes: IEC 60674-1(1980) Part 1 Definitions and general

172

Sl. No. IS Number/ DOC Number Title ISO/IEC 309 IS 11322:1985 Method for partial discharge IEC 44-4 (1980) measurement in instrument 310 IS 11353:1985 Guide for uniform system of marking IEC 60445(1973) and identification of conductors and apparatus terminals

311 IS 11354:1985 Guide for identification by hour numbers IEC 60152(63) of the phase conductors of 3-phase electric systems 312 IS 11530:1985 Voltage grading capacitor IEC 60358 :1990 313 IS 11654(Part 1):1986 Flexible insulating sleeving: IEC 60684-1(1980) Part 1 Definitions and general 314 IS 11675:1986 Button cells - Silver oxide IEC 86-2(1982) 315 IS 11676:1995 Microwave ovens for household and IEC 60705(1988) similar purposes 316 IS 11692:1986 Method of tests for electro-slag IEC 27(CO)60 remelting furnaces 317 IS 11712:1986 Safety requirements for IEC 27(CO)1959 electro-slag remelting furnaces. 318 IS 11731(Part 1):1986 Methods of test for determination of IEC 60107(1981) flammability of solid electrical insulating materials when exposed to an igniting source: Part 1 Horizontal specimen

319 IS 11731(Part 2):1986 Methods of test for determination of IEC 60707(1981) flammability of solid electrical insulating materials when exposed to an igniting source: Part 2 Vertical specimen

320 IS 11755:1986 Method of test for determination of IEC 60345(1971) electrical resistance and resistivity of insulating materials at elevated temperatures

321 IS 11756:1986 Method of test for co-efficients of IEC 60648(1979) friction of plastic film and sheeting for use as electrical insulation

322 IS 11955:1987 Preferred current ratings IEC 60059(1999) 323 IS 12026(Part 1):1986 Guide for the determination of the IEC 60590(1977) aromatic hydrocarbon content of new insulating oils: Part 1 Absorption

324 IS 12065:1987 Permissible limits of noise level for IEC 60034-9 rotating electrical machines

325 IS 12075:2008 Mechanical vibration of rotating electrical machines with shaft heights 56 mm and higher-measurement, evaluation and limits of vibration

326 IS 12083(Part 1):1986 Electrical relays: Part 1 Contact IEC 255-0-20 (1974) performance 327 IS 12083(Part 2):1986 Electrical relays: Part 2 Insulation tests IEC 255-5 (1977) 328 IS 12289:1988 Hand held electric engraving tools IEC 60745-1

173

Sl. No. IS Number/ DOC Number Title ISO/IEC 329 IS 12312:1987 Inductive voltage dividers IEC 60618 330 IS 12315(Part 2):1988 Methods of determining the minimum IEC 61241-2-1 ignition temperature of dusts: Part 2 Dust cloud in a furnace at a constant temperature

331 IS 12317(Part 1):1988 Ceramic and glass insulating materials IEC 60672-1(1980) for telecommunication and allied purposes: Part 1 General requirements and classification of ceramic and glass insulating materials

332 IS 12346:1999 Testing equipment for ac electrical IEC 60736:1982 energy meters (first revision)

333 IS 12360:1988 Voltage bands for electrical installations IEC 60038(1983) including preferred voltages and frequency (superseding IS:585) 334 IS 12422:1988 Test method for oxidation stability of IEC 60474(1977) inhibited mineral insulating oils 335 IS 12449(Part 1):1988 Starting devices (other than glow IEC 60926 starters): 336 IS 12449(Part 2):1988 Starting devices (other than glow IEC 60927 starters): 337 IS 12615:2011 Energy Efficient Three Phase Squirrel Cage Induction Motors (Second 338 IS 12642:1989 Brush-holders for slip rings group R- IEC 60778 Type RA 339 IS 12677:1989 Internal fuses for series capacitors IEC 60595:1977 340 IS 12730:1989 Internal fuses and internal overpressure IEC 60594:1977 disconnectors for capacitors for inductive heat generating plants

341 * IS 12747(Part 2):1989 Combined flexible materials for IEC 60626-2(1978) electrical insulation: Part 2 Methods of test 342 IS 12948:1990 Tungsten halogen lamps (non-vehicle) IEC 60357(1982) 343 ** IS 13010:2002 AC watt-hour meters, Class 0.5, 1 and IEC 60521:1988 2(first revision) 344 IS 13021(Part 1):1991 AC supplied electronic ballasts for IEC 60928(1990) tubular florescent lamps: Part 1 General and safety requirements 345 IS 13021(Part 2):1991 AC supplied electronic ballasts for IEC 60929(1990) tubular florescent lamps: Part 2 Performance requirements 346 IS 13203:1991 Method for verifying accuracy of tan- IEC 60996:1989 delta measurements 347 IS 13263:1992 Methods of test for plasma equipment IEC 60680(1980) for

348 IS 13315:1992 Nickel -cadmium batteries for electric IEC 623(1983) locomotives

174

Sl. No. IS Number/ DOC Number Title ISO/IEC 349 IS 13340:1993 Shunt capacitors for the self-healing IEC 60831-1:1988 type for ac power systems having rated voltage upto and including 650 V

350 IS 13341:1992 Requirements for ageing test, self- IEC 60831-2:1988 healing test and destruction test on shunt capacitors of the self-healing type for ac power systems having a rated voltage upto and including 650 V

351 IS 13364(Part 1):1992 Specification for ac generators driven IEC 60034-1 by reciprocating internal combustion engine: Part 1 Rated up to 20 kVA 352 IS 13364(Part 2):1992 Specification for ac generators driven IEC 60341(1983) by reciprocating internal combustion engine: Part 2 Rated above 20 kVA and upto 1250 kVA

353 IS 13466:1992 Specification for brushes for electrical IEC 60136, 467, 773 machines [superseding IS:3003 (Parts 3 and 4)-1977] 354 IS 13508:1992 Test procedure for measurement of loss IEC 60894(1987) of tangent angle of coils and bars for machine winding-guide

355 IS 13529:1992 Guide on effects of unbalanced IEC 600892(1987) voltages on the performance of three- phase cage induction motors

356 IS 13573:1992 Joints and terminations for polymeric IEC 60502:1989 cables for working voltages from 6.6 kV up to and including 33 kV - performance requirements and type tests

357 IS 13580:1992 Internal fuses and internal IEC 60594:1977 overpressure disconnectors for power electronic capacitors 358 IS 13584:1993 Specification for brush materials for IEC 413(1972) electrical machinery [Superseding IS 3003(Part 2):1977] 359 IS 13585(Part 1):1994 Shunt capacitors of non- self- healing IEC 60931-1:1989 type for ac power systems having a rated voltage upto and including 650 V: 360 IS 13586:1993 Definitions and nomenclature for carbon IEC 276(1968) brushes, brush holders, commutators and slip rings for rotating electrical machinery (superseding IS:3003(Part 1)-

361 IS 13631:2000 Method of test for detection and IEC 60666(1979) determination of antioxidant additives in insulating oils

362 IS 13648:1993 Power electronics capacitors IEC 61071-1:1991 363 ** IS 13779:1999 AC static watthour meters (Class 1 and 2) IEC 61036:1996 364 IS 13886:1993 Bimetallic thermostats and thermal IEC 60730(1892) cutouts for use with electric irons

175


365 IS 13925(Part 1):1998 Shunt capacitors for ac power systems IEC 60871-1:1987 having a rated voltage above 1000 V : Part 1General performance, testing and rating safety requirements - Guide for installation and operation (superseding

366 IS 13964:1994 Methods of measurement of IEC 551 (1976) transformer and reactor sound levels 367 IS 14122:1994 Built in thermal protection for electric IEC 60034-11(1978) motors rated up to 660 V ac 368 IS 14144:1994 Electric coffee makers IEC 60661(1980) (Superseding IS 3514) 369 IS 14155:1994 Domestic electric clothes washing IEC 60456(1974) machines for domestic use [Superseding IS 6390(Part 1):1983 and IS 6390 (Part 3): 1992]

370 IS 14218:1994 Sealed cylindrical type rechargeable IEC 285(1983) nickel cadmium cells 371 IS 14256:1995 Rating specification for semiconductor IEC 61136-1(1992) power converters for adjustable speed electric drive systems - particularly for DC motor

372 IS 14257:1995 Lead-acid storage batteries for motor IEC 95-1(1988) vehicles with light weight and high cranking performance

373 IS 14376:1996 Brush holders for electrical machines IEC 136(1986) 374 IS 14415:1997 Volt-Amphere hour meters for restricted IEC 60211:1996 power factor range - specification [superseding IS:722 (Part 5):1980 375 IS 14451(Part 1):1998 Telemetering of consumption and IEC 60338:1970 demand: Part 1 Impulse transmitting and 376 IS 14451(Part 2):1999 Telemetering for Consumption and IEC 60338:1970 Demands Part 2 Direct digital transfer of meter values

377 IS 14479:1997 Electromagnetic compatibility of IEC 60 533:1999 electrical and electronic installation in 378 ** IS 14697:1999 ac static transformer operated watthour IEC 60687:1992 and var-hour meters, class 0.2S and .5S-Specification

379 IS 14763:2000 Conduit for electrical purposes, outside IEC 60423(1993) diameters of conduits for electrical installations and threads for conduits and fittings

380 IS 14768(Part 1):2000 Conduit fittings for electrical IEC 61035-1(1990) installations :Part 1 General 381 IS 14768(Part 2):2003 Conduit fittings for electrical IEC 61035-2-1(1993) installations : Part 2 Metal conduit fittings (superseding IS 2667)

176

Sl. No. IS Number/ DOC Number Title ISO/IEC 382 IS 14772:2000 Enclosures for accessories for IEC 60670-1(1989) household and similar fixed electrical installations (Superseding IS 5133(Part 1 383 * IS 14774(Part 1):2000 Resistance trace heating in potentially IEC 62086-1 explosive atmospheres: Part 1 General and testing requirements 384 IS 14774(Part 2):2000 Resistance trace heating in potentially IEC 62086-2 explosive atmospheres: Part 2 Informative application guide for design, installation and maintenance

385 IS 14897:2000 Glass bulb designation system for IEC 60887(1988) lamps-Guide 386 IS 14927(Part 1):2001 Cable trunking and ducting systems IEC 61084-1(1991) for electrical installations :Part 1 General requirements

387 IS 14927(Part 2):2001 Cable trunking and ducting systems for IEC 61084-2-1(1996) electrical installations: Part 2 Cable trunking and ducting systems instended for mounting on walls or ceilings

388 IS 14930(Part 1):2001 Conduit systems for electrical IEC 61386-1(1996) installations : 389 IS 14930(Part 2):2001 Conduit systems for electrical IEC 61386-2(1995) installations : Part 2 Particular requirements for

390 IS 15063:2001 Alkaline manganese dioxide cells IEC 86-2(1994) 391 IS 15086(Part 3):2003 Surge arresters: Part 3 Artificial IEC 60099-3:1990 pollution testing of surge arresters 392 IS 15111(Part 1):2002 Self ballasted lamps for general lighting IEC 60968(1988) services : Part 1 Safety requirements

393 IS 15111(Part 2):2002 Self ballasted lamps for general lighting IEC 60969(1988) services : Part 2 Performance requirements

394 IS 15518(Part 1):2004 Safety requirements for incandescent IEC 60432-1 (1999) lamps : Part 1 Tungsten filament lamps for domestic and similar general lighting purposes

395 IS 15652:2006 Insulating mats for electrical purposes - IEC 61111(2002) Specification (Superseding IS: 5424) 396 IS 15687(Part 1):2006 Single-capped fluorescent lamps: Part 1 IEC 61199 (1999) Safety requirements 397 IS 15787:2008 Switch- socket outlets (Non-Interlock IEC 60884-2-3 (1989) 398 IS 60320(Part 2/Sec Appliance couplers for household and IEC 60320-2-3(1998) 3):2007 similar general purposes- part 2-3 Appliance coupler with a degree of protection higher IPXO

Total : EQUIVALENT STANDARDS = 398

177

ANNEX 4 BILINGUAL STANDARDS


1 IS 12762(Part 9):2010 Photovoltaic devices: Part 9 Solar simulator performance requirements

178

ANNEX 5

MEMBERSHIP STATUS OF INDIA ON TECHNICAL COMMITTEES AND SUBCOMMITTEES OF IEC

IEC/TC/SC Title of IEC/TC/SC Membership Status

Corresponding National Mirror Committee

TC 1 Terminology Observer ET 01

TC 2 Rotating machinery Participant ET 15

TC 3 Information structures, documentation and graphical symbols

Observer ET 01

SC 3C Graphical symbols for use on equipment Observer ET 01

SC 3D Data sets for libraries Observer No Committee

TC 4 Hydraulic turbines Participating ET 15

TC 5 Steam Turbines (IN STAND BY) Observer ET 15

TC 7 Overhead electrical conductors Participant ET 37

TC 8 Systems aspects for electrical energy Participating ET 01

TC 9 Electrical equipment and systems for railways Observer Committee disbanded in 1999

TC 10 Fluids for electrotechnical applications Observer ET 03

TC 11 Overhead lines Participant ET 37

TC 13 Electrical energy measurement, tariff- and load control

Participant ET 13

TC 14 Power transformers Participant ET 16

TC 15 Solid electrical insulating materials Observer ET 02

TC 16 Basic and safety principles for man-machine interface, marking and identification

Observer ET 01

TC 17 Switchgear and controlgear Participant ET 07/ET 08

SC 17A High-voltage switchgear and controlgear Participant ET 08

179

SC 17B Low-voltage switchgear and controlgear Participant ET 07

SC 17C High-voltage switchgear and controlgear assemblies

Participant ET 08

SC 17D Low-voltage switchgear and controlgear assemblies

Participant ET 07

TC 18 Electrical installations of ships and of mobile and fixed offshore units

Observer ET 20

SC 18A Cables and cable installations Observer ET 20

TC 20 Electric cables Participant ET 09

TC 21 Secondary cells and batteries Participant ET 11

SC 21A Secondary cells and batteries containing alkaline or other non-acid electrolytes

Participant ET 11

TC 22 Power electronic systems and equipment Observer ET 31

SC 22E Stabilized power supplies Observer ET 31

SC 22F Power electronics for electrical transmission and distribution systems

Participant ET 40

SC 22G Adjustable speed electric drive systems incorporating semiconductor power con

Observer ET 31

TC 23 Electrical accessories Observer ET 14

SC 23A Cable management systems Observer ET 14

SC 23B Plugs, socket-outlets and switches Participant ET 14

SC 23C World-wide plug and socket-outlet systems Observer ET 14

SC 23E Circuit-breakers and similar equipment for household use

Participant ET 07

SC 23F Connecting devices Observer ET 14

SC 23G Appliance couplers Observer ET 14

SC 23H Industrial, plugs and socket-outlets Observer ET 14

SC 23J Switches for appliances Observer ET 14

180

TC 25 Quantities and units, and their letter symbols Observer ET 01

TC 26 Electric welding Observer ET 21

TC 27 Industrial electroheating equipment Observer ET 18

TC 28 Insulation co-ordination Participant ET 19

TC 31 Equipment for explosive atmospheres Participant ET 22

SC 31G Intrinsically-safe apparatus Participant ET 22

SC 31J Classification of hazardous areas and installation requirements

Participant ET 22

TC 32 Fuses Participant ET 39

SC 32A High-voltage fuses Participant ET 39

SC 32B Low-voltage fuses Participant ET 39

SC 32C Miniature fuses Observer ET 39

TC 33 Power capacitors Participant ET 29

TC 34 Lamps and related equipment Participant ET 23

SC 34A Lamps Participant ET 23

SC 34B Lamp caps and holders Participant ET 14

SC 34C Auxiliaries for lamps Participant ET 23

SC 34D Luminaires Participant ET 24

TC 35 Primary cells and batteries Participant ET 10

TC 36 Insulators Participant ET 06

SC 36A Insulated bushings Participant ET 06

SC 36B Insulators for overhead lines Participant ET 06

SC 36C Insulators for substations Participant ET 06

TC 37 Surge arresters Participant ET 30

SC 37A Low-voltage surge protective devices Participant ET 07

181

SC 37B Specific components for surge arresters and surge protective devices

Participant ET 07

TC 38 Instrument transformers Participant ET 34

TC 42 High-voltage testing techniques Participant ET 19

TC 44 Safety of machinery – Elect. Aspects Observer No Committee

TC 45 Nuclear instrumentation Observer No Committee

SC 45A Instrumentation and control of nuclear facilities Observer No Committee

SC 45B Radiation protection instrumentation Observer No Committee

TC 55 Winding wires Participant ET 33

TC 59 Performance of household and similar electrical appliances

Observer ET 32

SC 59A Electric dishwashers Observer ET 32

SC 59C Heating appliances Participant ET 32

SC 59D Home laundry appliances Participant ET 32

SC 59F Floor treatment appliances Observer ET 32

SC 59L Small household appliances Participant ET 32

TC 61 Safety of household and similar electrical appliances

Participant ET 32

SC 61B Safety of microwave ovens Observer ET 32

SC 61E Safety of electrical commercial catering equipment

Observer ET 32

SC 61H Safety of electrically-operated farm appliances Observer ET 32

SC 61J Electrical motor-operated cleaning appliances for industrial use

Observer ET 32

TC 64 Electrical installations and protection against electric shock

Observer ET 20

TC 65 Industrial-process measurement, control and automation

Observer ET 18

182

SC 65A System aspects Observer ET 18

SC 65B Devices & process analysis Observer ET 18

TC 70 Degrees of protection provided by enclosures Observer ET 01

TC 72 Automatic controls for household use Observer ET 32

TC 73 Short-circuit currents Observer ET 20

TC 78 Live working Observer ET 36

TC 79 Alarm systems Observer No Committee

TC 81 Lightning protection Observer ET 20

TC 82 Solar photovoltaic energy systems Participant ET 28

TC 85 Measuring equipment for electrical and electromagnetic quantities

Observer ET 12/LITD 8

TC 88 Wind turbines Participant ET 42

TC 94 All-or-nothing electrical relays Participant ET 35

TC 95 Measuring relays and protection equipment Participant ET 35

TC 96 Transformers, reactors, power supply units and similar products for low voltage up to 1100 V

Participant ET 16

TC 109 Insulation co-ordination for low-voltage equipment

Observer No Committee

TC 111 Environmental standardization for electrical and electronic products and systems

Participant ET 43

TC 112 Evaluation and qualification of electrical insulating materials and systems

Participant ET 02

TC 113 Nanotechnology standardization for electrical and electronic products/systems

Observer No Committee

TC 116 Safety of motor-operated electric tools Observer No Committee

ISO/TC 43/SC 1 Noise Observer ET 15

ISO/TC 44 Welding and allied processes Observer ET 21

183

ISO/TC 117 Industrial Fans Observer ET 32

ISO/TC 178 Lifts, escalators and moving walks Participant ET 25

Documents

Indian Standrad