Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
Rev 2018.01
India Training CenterTraining Offer Catalog – 2021/22ENERGY MANAGEMENT
About The Training OfferThe Schneider Electric TSC Training Team design and deploy
training courses on the following offers:
Digital Energy Courses
• Power Metering
• Branch Circuit Power Metering – Overview
• Vigilohm Insulation Monitoring
• Ethernet Gateways & Energy Servers
• EcoStruxure™ Power Monitoring Expert
Power Products Courses
• Get to know Masterpact MTZ
• Discover Masterpact NT/NW
• Discover EasyPact CVS/MVS offer
• Get to know Compact NSX
• Com-Advanced functions of Micrologic
• Select, Implement and Commission Smart Panels
• TeSys T Motor Protection Relay
• TeSys U Motor Protection Relay
Home & Distribution Courses
• Acti9 Control & Monitoring
Power Systems Courses
• Easergy Sepam offer & Hands-on with SFT2841 software
• Easergy MiCOM Offer & Hands-on with Easergy Studio
software
Digital Energy Courses
Page 3Confidential Property of Schneider Electric |
1 Power Metering Overview
2 Branch Circuit Power Metering - Overview
3 Vigilohm Insulation Monitoring - Overview
4 Ethernet Gateway Link150/300 - Overview
5EcoStruxure™ Power Monitoring Expert –
Installation & Commissioning
Training Content
▪ The key features of a Power Metering system.
▪ The industry requirements for meter selection.
▪ Interpret the global competition for the respective metering
range.
▪ Distinguish the market movement for the offer level.
▪ To describe the various device models installation &
programming procedures.
▪ Complete the steps to configure the basic and advanced
details for the meters.
▪ Identify and verify the basic displays for the devices.
▪ Distinguish the steps to be addressed during installation
and avoid troubleshooting at later stage.
▪ Understand the procedure of viewing and verifying the
basic and advanced readings using Utility and Application
software.
▪ Communication & CT/PT wiring details will be explained
to enable participants to manage the site requirements.
▪ Basic troubleshooting will be introduced to understand the
possible cause of a common issue.
The Power Metering Technical Overview course provides participants
with the resources to successfully understand the complete range of
power metering products. They will be able to learn about the products
key features, industry requirements , key applications and
troubleshooting.
Power Metering - Overview
Page 4Confidential Property of Schneider Electric |
EMMET
In Class/Remote
6-8 Trainees
2 days
60% Theory
40% Hands-On
Target Audience
▪ Panel Builders , System Integrators
▪ End User’s , OEMs
▪ SE internal
Training Content
▪ Explain the key features of advanced meters such as
BCPM, EM4800
▪ Describe the various device models installation and
programming procedures.
▪ Complete the steps to configure the basic and advanced
details for the meters
▪ Identify and verify the basic displays for the devices.
▪ Distinguish the steps to be addressed during installation
and avoid trouble shooting at later stage.
▪ Understand the procedure of viewing and verifying the
basic and advanced readings using Utility and Application
software.
▪ Communication & CT/PT wiring details will be explained
to enable participants to manage the site requirements.
▪ Basic troubleshooting will be introduced to understand the
possible cause of a common issue.
The Basic Multi-Circuit metering Technical overview course provides
participants with the resources to successfully understand this range
of products. They will learn about the products main technical
characteristics, and how to install and program this product based on
the applications, capabilities and features.
Branch Circuit Power Metering -
Technical Overview
Page 5Confidential Property of Schneider Electric |
EMBCPM
In Class/Remote
6-8 Trainees
1 day
60% Theory
40% Hands-On
Target Audience
▪ Panel Builders , System Integrators
▪ End User’s , OEMs
▪ SE internal
Training Content
▪ Understand IT specificities.
▪ Know the global Vigilohm offer.
▪ Define the appropriate architecture according to customer
application.
▪ Implement the offer.
▪ Troubleshoot technical issues.
▪ This course will alternate between theory and practice
with labs to re-enforce the key points and get familiar with
the products.
The Vigilohm Insulation Monitoring Overview is designed to provide the
participants with the knowledge and ability to understand the principles
of permanent insulation monitoring in IT systems and to commission a
Vigilohm system.
Vigilohm Insulation Monitoring -
Overview
Page 6Confidential Property of Schneider Electric |
EMVIGIL
In Class/Remote
4-6 Trainees
1 day
60% Theory
40% Hands-On
Target Audience
▪ Panel Builders , System Integrators
▪ End User’s , OEMs
▪ SE internal
Training Content
▪ Learn about mounting and installation procedure for
gateways.
▪ Prepare gateways and devices for wiring connections and
communications connections.
▪ Configure the gateways.
▪ Visualize real time data.
▪ Visualize historical data through its display and
dashboards.
▪ How to access diagnostics and maintenance pages.
▪ How to perform firmware upgrades.
▪ How to customize it.
The Link150 and EGX300 Technical Learning provides the trainee with
an overview of communication gateway range. Trainees will learn how
to wire and install the EGX, and how to configure it.
Ethernet Gateway Link150/300 –
Overview
Page 7Confidential Property of Schneider Electric |
EMEGX
In Class/Remote
6-8 Trainees
1 day
60% Theory
40% Hands-On
Target Audience
▪ Panel Builders , System Integrators
▪ End User’s , OEMs
▪ SE internal
Training Content
▪ Describe the server and software components of
EcoStruxure™ Power Monitoring Expert.
▪ Deploy a “standalone” EcoStruxure™ Power Monitoring
Expert server.
▪ Connect meters and devices to the system.
▪ Configure power meter devices with recommended
settings and parameters.
▪ Configure system events and device alarms.
▪ Design diagrams and custom data presentation screens.
▪ Organize an effective database maintenance plan.
▪ Configure the reporting interface.
The Power Monitoring Expert Installation & Commissioning course
provides participants with the resources to successfully commission a
“standalone” Power Monitoring Expert system. They will follow a standard
scope of work to collect information from the customer, prepare the server
and operating system, install Power Monitoring Expert and program the
software to meet the customer’s needs.
Page 8Confidential Property of Schneider Electric |
EMPME
In Class/Remote
4-6 Trainees
3 days
60% Theory
40% Hands-On
EcoStruxure™ Power Monitoring Expert –
Installation & Commissioning
Target Audience
▪ System Integrators
▪ End User’s , OEMs
▪ SE internal
Power Products Courses
Page 9Confidential Property of Schneider Electric |
1
Discover Masterpact NT/NW2
Discover EasyPact CVS/MVS offer3
Get to know Compact NSX4
Com-Advanced functions of Micrologic5
Select, implement and commission Smart Panels6
7TeSys T Motor Protection Relay
Technical Overview
TeSys U Motor Protection DOL Starter
Technical Overview8
Get to Know Masterpact MTZ
Training Content:
• Introduction
• The MTZ offer
• Technical improvements
• Discover the breaker
• Communication solutions & its programming using
Ecoreach software.
• The software offer
• Configure and operate
• Traceability features
• Substitution from M/NT/NW
• Troubleshooting
The Masterpact MTZ ACB Technical course provides
participants with the resources to successfully understand the
complete range. They will be able to learn about the products key
features, industry requirements, key applications and
troubleshooting.
Get to Know Masterpact MTZ
Page 10Confidential Property of Schneider Electric |
PTACBMTZ
In Class/Remote
6-8 Trainees
1.5 days
50% Theory
50% Hands-On
Target Audience
▪ Panel Builders , System Integrators
▪ End User’s , OEMs
▪ SE internal
Training Content
▪ Understand the customer’s expectations.
▪ Know the global ACB offer.
▪ Know the solutions provided by Masterpact.
▪ Define the appropriate architecture according to customer
application.
▪ Situate the product.
▪ Protection, measurement and alarming.
▪ Troubleshoot technical issues.
▪ The communication functions included in ACB offer via
Modbus serial and TCP/IP and it’s troubleshooting.
▪ How to wire and connect ULP & FDM 121/FDM 128, and
to set up its parameters using Ecoreach.
▪ The course will alternate between theory and practice,
with labs to re-enforce the key points and get familiar with
the products.
The LV Air circuit breakers training module is designed to provide the
participants with the aspects such as the selection of the appropriate
solution for each installation & configuration.
Discover Masterpact NT/NW
Page 11Confidential Property of Schneider Electric |
PTACBM
In Class/Remote
6-8 Trainees
1 day
70% Theory
30% Hands-On
Target Audience
▪ Panel Builders , System Integrators
▪ End User’s , OEMs
▪ SE internal
Training Content
▪ Understand the customer’s expectations.
▪ Be able to describe the basic functions of EasyPact
CVS/MVS
▪ Position EasyPact CVS/MVS in Partner Projects offer
▪ Be able to introduce EasyPact CVS/MVS to a customer
▪ Know the main competitors
▪ Know on-line documentation
The Discover EasyPact (CVS/MVS) offer training module is designed
to provide the participants with the aspects such as the selection of the
appropriate solution for each installation & configuration.
Discover EasyPact (CVS/MVS) offer
Page 12Confidential Property of Schneider Electric |
PTACBE
In Class/Remote
6-8 Trainees
1 day
70% Theory
30% Hands-On
Target Audience
▪ Panel Builders
▪ End User’s , OEMs
▪ SE internal
Training Content
▪ The Compact NSX offer range.
▪ How to use and select the CB complying with customer's
needs.
▪ To know the accessories and how to assemble them.
▪ The Protection-Metering/alarming offers.
▪ How to set up protection, metering, alarming parameters
▪ The Communication offer.
▪ How to wire and connect ULP & FDM 121/FDM 128, and
to set up its parameters using Ecoreach.
The Compact NSX offer training module is designed to provide the
participants with the aspects such as the selection of the appropriate
solution for each installation & configuration.
Get to Know Compact NSX
Page 13Confidential Property of Schneider Electric |
PTMCCB
In Class/Remote
6-8 Trainees
1 day
70% Theory
30% Hands-On
Target Audience
▪ Panel Builders , System Integrators
▪ End User’s , OEMs
▪ SE internal
Training Content
▪ The Micrologic range including Micrologic, I/O and IFE
Com modules.
▪ How to use Micrologic.
▪ How to set-up and use advanced functions of Micrologic.
▪ How to update a firmware.
▪ How to use I/O IFE predefined parameters.
▪ How to present Com Architecture (IFE -I/O) : ULP,
Modbus, Ethernet.
▪ How to use Ecoreach software.
▪ The course will alternate between theory and practice,
with labs to re-enforce the key points and get familiar with
the products.
The Com-Advanced functions of Micrologic training module is designed
to provide the participants with the aspects such as the selection of the
appropriate Micrologic and its communication features for each
installation & configuration.
Com-Advanced functions of Micrologic
Page 14Confidential Property of Schneider Electric |
PTCOMADV
In Class/Remote
6-8 Trainees
1 day
70% Theory
30% Hands-On
Target Audience
▪ Panel Builders , System Integrators
▪ End User’s , OEMs
▪ SE internal
Training Content
▪ The Smart Panel concept.
▪ Select the right Smart Panel architecture.
▪ Understand and provide appropriate solution for
selection, installation of devices/components in Smart
Panel.
▪ Physically assemble the components for creating the
network topology.
▪ Implement protection setting using various commission
tools.
▪ Implement global communication settings.
▪ Device firmware baseline, firmware upgradation &
parameter settings of components using Ecoreach tool.
▪ Diagnostic and troubleshooting tips.
▪ The course will alternate between theory and practice,
with labs to re-enforce the key points and get familiar with
the products.
The Smart Panels training module is designed to provide the
participants with the aspects such as the selection of appropriate
architecture and its communication features for each installation &
configuration.
Select, Implement and Commission
Smart Panels
Page 15Confidential Property of Schneider Electric |
PTSMPNL
In Class/Remote
6-8 Trainees
2 days
60% Theory
40% Hands-On
Target Audience
▪ Panel Builders , System Integrators
▪ End User’s , OEMs
▪ SE internal
Training Content
▪ To get to know about TeSys T offer, to be able specify
reference.
▪ To know which protection functions are provided by
TeSys T.
▪ To know how to measure and monitor critical values.
▪ To know different ways to control your motor.
▪ To be able to install and wire TeSys T power and control
circuit.
▪ To be able to configure TeSys T using SoMove.
▪ The communication functions included in TeSys T for
various industrial communication network’s. Technical
overview on TeSys T custom logic programming.
▪ To be able to communicate with PLC on different
Industrial communication protocols (on request) *
▪ The course will alternate between theory and practice,
with labs to re-enforce the key points and get familiar with
the products.
The TeSys T Motor Protection Relay training module is designed
to provide the participants with the aspects such as the selection of the
appropriate solution for each installation, configuration. Protection,
Monitoring , Control, Diagnostic & troubleshooting.
TeSys T Motor Protection Relay –
Technical Overview
Page 16Confidential Property of Schneider Electric |
PTCTRT
In Class/Remote
4-8 Trainees
2 days* (Each comm protocol
Modbus, CANOpen,
Profibus, Ethernet)
1 day more.
70% Theory
30% Hands-On
Target Audience
▪ Panel Builders , System Integrators
▪ End User’s , OEMs
▪ SE internal
Training Content
▪ To get to know about TeSys U offer and product range
▪ To know the functionality and composition of TeSys U
assembly
▪ To be able to use accessories, communication and control
option
▪ To use TeSys U hardware configuration
▪ To be able to provide configuration, monitoring, control,
diagnostic
▪ To know working with SoMove software
▪ To be able to communicate with PLC on different
Industrial communication protocols (on request) *
▪ The course will alternate between theory and practice,
with labs to re-enforce the key points and get familiar with
the products.
The TeSys U Motor Protection DOL module training is designed to
provide the participants with the aspects such as the selection of the
Appropriate solution for each installation, configuration. Protection,
Monitoring ,Control, Diagnostic & troubleshooting.
Page 17Confidential Property of Schneider Electric |
TeSys U Motor Protection DOL Starter –
Technical Overview
PTCTRU
In Class/Remote
4-8 Trainees
1.5 days* (Each comm protocol
Modbus, CANOpen,
Profibus, Ethernet)
0.5 day more.
70% Theory
30% Hands-On
Target Audience
▪ Panel Builders , System Integrators
▪ End User’s , OEMs
▪ SE internal
Home & Distribution Courses
Page 18Confidential Property of Schneider Electric |
1 Acti9 Control & Monitoring
Training Content
▪ The Acti9 offer.
▪ The concept and its applications.
▪ Integration in supervision system.
▪ To understand and provide appropriate solution for
selection, installation, configuration. protection,
measurements, diagnostic & troubleshooting.
▪ The communication functions included in Smartlink.
▪ Sizing of 24V DC power supply.
▪ The course will alternate between theory and practice,
with labs to re-enforce the key points and get familiar with
the products.
The Acti9 control & Monitoring Training module is designed to provide
Smart Solution with Acti9 communication system as well as Control
and Monitoring solution with "SMARTLINK" at MCB level. The practical
skills and knowledge to be able to promote Smartlink solution with
Acti9 MCB in smart city.
Acti9 Control & Monitoring
Page 19Confidential Property of Schneider Electric |
PTFDR
In Class/Remote
6-8 Trainees
1 day
60% Theory
40% Hands-On
Target Audience
▪ Panel Builders , System Integrators
▪ End User’s , OEMs
▪ SE internal
Power Systems Courses
Page 20Confidential Property of Schneider Electric |
1Easergy Sepam offer & Hands-on with SFT2841
software
2Easergy MiCOM Offer & Hands-on with Easergy
Studio software
Training Content
Easergy SEPAM SOLUTION
• Sepam Offer
• Presentation of the range
• Sepam 10, 20, 40, 80 series
• Functions & Characteristics
MODULARITY
• Modular architecture
• Additional modules
• Communication module
PERFORMANCE
• Electrical characteristics
• Different functions available
• Protection for different Applications
SIMPLICITY
• Commissioning
• User friendly
• Sepam Software/Tools SFT2841 , CET850 , IED Scout.
• Implementation of Substation protocol IEC61850
The Easergy Sepam Protection Relay training module is designed
to provide the participants with the aspects such as the selection of the
appropriate solution for each installation, configuration. Protection,
Monitoring , Control, Diagnostic & troubleshooting.
Easergy Sepam offer & Hands-on with
SFT2841 software– Technical Overview
Page 21Confidential Property of Schneider Electric |
ENPSEPM
In Class/Remote
4-8 Trainees
2 days.
60% Theory
40% Hands-On
Target Audience
▪ Panel Builders , System Integrators
▪ End User’s , OEMs
▪ SE internal
Training Content
Easergy MiCOM SOLUTION
• MiCOM Offer
• Presentation of the range
• MiCOM P20, P30 & P40 series
• Functions & Characteristics
MODULARITY
• Modular architecture
• Additional modules
• Communication module
PERFORMANCE
• Electrical characteristics
• Different functions available
• Protection for different Applications
SIMPLICITY
• Commissioning
• User friendly
• MiCOM Software/Tools – Easergy Studio
• Implementation of Substation protocol IEC61850
The Easergy MiCOM Protection Relay training is designed to
provide the participants with the aspects such as the selection of the
Appropriate solution for each installation, configuration. Protection,
Monitoring ,Control, Diagnostic & troubleshooting.
Page 22Confidential Property of Schneider Electric |
Easergy MiCOM Offer & Hands-on with
Easergy Studio software– Technical Overview
Target Audience
▪ Panel Builders , System Integrators
▪ End User’s , OEMs
▪ SE internal
ENPMICM
In Class/Remote
4-8 Trainees
2 days.
60% Theory
40% Hands-On
Contact us
9th Floor, DLF Building No. 10, Tower C,
DLF Cyber City, Phase II
Gurgaon - 122002
Haryana, India