INDEX• WELCOME DISPLAY• DEFAULT DISPLAY• MAIN DISPLAY• SYSTEM LAYOUT – P105 to P104• SYSTEM LAYOUT – P109 to P106• ROOMS P-109 to P-104 DISPLAY• CHANGE SET POINTS• MAIN DATA TRENDING• TEMP. DATA TRENDING• HUM. DATA TRENDING • ALARMS• A/C UNIT CONTROL

WELCOME DISPLAY

Touch any of these buttons to go to the project of your preference.

Touch this button to shutdown current application and access panel view configuration settings.

DEFAULT DISPLAY

Touch this button to Login.

There are 3 types of accounts:

•Administrator

•Power User

•Guest

This is the first display that it’s shown when you choose our project on the welcome screen. You have to Login to be able to access the other displays.

Indicates User. Default is shown when nobody is logged in.

Login Banner.Indicates you have to use Login Button to be able to access the other displays.

Touch this button to go back to Welcome Screen

Project Website

If this message is shown it means that one of the rooms’ alarm has been activated. (Refer to ALARMS button)

Touch this button to shutdown current application and access panel view configuration settings.

These buttons are shown once the user logs in. They allow access into other displays or to change the current user’s password is admin is logged on.

If this message is shown it means that one of the rooms’ alarm has been activated. (Refer to ALARMS button)

MAIN DISPLAYTouch this button to shutdown current application and access panel view configuration settings.

Indicates User.

Default is shown when nobody is logged in.

These buttons allow the Administrator or Power User to change the status of the system in each room.

Touching the layout allows user to go directly to the corresponding system layout.

Indicates room actual temperature and humidity reading.

Key shows how each component works.

Touch these buttons to display the respective page. Administrator is the only user with access to the Change Set Point Display and A/C Unit Control.

Touch these buttons to login or logout user.

SYSTEM LAYOUT

These buttons allow to visit the room shown and layout for others rooms.

SYSTEM LAYOUT

Key shows how each component works.

Touch these buttons to display the respective page. Administrator is the only user with access to the Change Set Point Display and A/C Unit Control.

Touch these buttons to login or logout user.

These buttons allow to visit the room shown and layout for others rooms.

These buttons allow the Administrator or Power User to change the status of the system in each room.

Touching the layout allows user to go directly to the corresponding system layout.

Indicates room actual temperature and humidity reading.

Shows room actual temperature and humidity reading with their respective set points.

Administrator can click on top of this area and it will direct him to the Change Set Point Display.

These buttons allow the Administrator or Power User to change the status of the system. Also indicates actual operator

This button allows Administrator or Power User to turn ON/OFF the room lights when system is in Remote.

ROOMS P-109 to P-104 DISPLAY

The layout shows what’s happening in that room.

Allows user to go directly to the system layout.

Touch these buttons to display the respective page. Administrator is the only user with access to the Change Set Point Display and A/C Unit Control.

Touch these buttons to login or logout user.

Touch this button to go to the Renewable Energy project.

Lets user know in what room display he is in. If this message is shown it means that the room’s alarm is activated.

CHANGE SET POINTS

This table shows week and weekends Temperature & Humidity Set Points for the different rooms. Administrator can enter the new Set Point.

Shows Temperature& Humidity recommended set point values.

Touch this button to restore default set point values.

NOTE: Administrator is the only user with access to change data in this display.

Touch these buttons to display the respective page. Administrator is the only user with access to the Change Set Point Display and A/C Unit Control.

Touch these buttons to login or logout user.

If this message is shown it means that the room’s alarm is activated.

MAIN DATA TRENDING

Touch these buttons to display the respective page. Administrator is the only user with access to the Change Set Point Display and A/C Unit Control.

Touch these buttons to login or logout user.

If this message is shown, it means that a room alarm is activated.

Touch any of these buttons to observe the temperatureor humidity data trending.

TEMP. DATA TRENDING

Touch these buttons to display the respective page. Administrator is the only user with access to the Change Set Point Display and A/C Unit Control.

Touch these buttons to login or logout user.

If this message is shown, it means that a room alarm is activated.

Trends Temperature Values.

It shows all the history of the Trending.

Touch this button to go back to main

HUM. DATA TRENDING

Touch these buttons to display the respective page. Administrator is the only user with access to the Change Set Point Display and A/C Unit Control.

Touch these buttons to login or logout user.

If this message is shown, it means that a room alarm is activated.

Trends Temperature Values.

It shows all the history of the Trending.

Touch this button to go back to main.

These buttons allow the Administrator or Power User to change the status of the system.

Touch these buttons to display the respective page. Administrator is the only user with access to the Change Set Point Display.

Touch these buttons to login or logout user.

Shows Alarms Summary. Actual Alarms are the ones blinking red and yellow.

ALARMS

Allows to have more visibility of the system.

Touch these buttons to display the respective room page.

This button stops blinking the alarm,but doesn’t resolve it.

This button let you sort the way to see the alarms.

A/C UNIT CONTROL

This button allows Administrator turn ON/OFF the A/C unit in rooms P-109 through P-106. The four rooms needs to be in Remote Mode.

These buttons let control the Variable Frequency Drive.

Allows to have more visibility of the system.

Touch these buttons to display the respective room page.

These buttons allows the Administrator to change the status of the system.

Touch these buttons to display the respective page. Administrator is the only user with access to the Change Set Point Display.

Touch these buttons to login or logout user.

Indicates if the a/c is ON/OFF. YELLOW = ON, WHITE = OFF