INDEX [] · .50mm Pb equivalent at 75-130kVp under direct beam. GL (“Greenlite”) lead free material is 41% Pb equivalent at 75-130kVp under direct beam We offer a variety of different

PART # PAGE1........................192........................193........................194........................195........................196........................197........................198........................199........................2010......................2011......................2014......................2015......................2017......................2019......................20100.................6,19101..........11,19,20102.....11,19,20,21103....................17104..........11,19,20105.....17,18,19,26106...............17,19107.....................6108....................17109.....................6110...............17,19111..........17,19,20112..........11,19,20113.....17,19,20,26114..........17,19,20115......................6116.....17,19,20,26117.....17,19,20,26118.....17,19,20,26119....................12120....................17121............8,19,20122..........17,20,26123....................17

124......................6126..........17,20,26127...............15,20128...............18,19129...............18,19130...............18,19131..........18,19,20132...............12,20133...............12,20135....................21136..........18,19,20138..........18,19,20139..........18,20,26140...............18,19141....................18142....................18143....................18144....................18145............6,18,20146......................7148....................15149....................11150......................7151...............18,19152....................18153.................7,19154..........18,19,26158....................18160.....................7161.....................7162.....................7163....................12164....................12165....................12168....................21169..........18,19,20170....................22171...............19,22172....................22173....................22

174....................22175....................22176....................22180....................22181....................22182....................22183....................22184....................22185....................22186....................22191....................18192....................10193....................10194....................10195......................7196....................18199....................21201....................18203......................9204....................21205....................12207....................12208....................21209......................9211....................21218......................9219....................22221......................9300....................13301....................16302....................16303...............13,16304....................16305....................16306....................16307....................16308....................16309....................14401....................10405...............13,20

406....................20407...............13,20408...............13,20409....................13421....................15422....................20425....................15426....................15427......................9428......................8430......................8431......................9438......................7439......................7500....................23501....................23502....................23503....................23504....................24505....................24510....................23520....................22530....................22555....................24556...............23,24557...............23,24558...............23,24559...............23,24801-V.................26802-V.................25803-V.................25804-V.................25808-V.................26809-V.................26810-V.................26814-V.................26812-V.................26813-V.................26815-V.................26816-V............25,26

817-V.................26818-V............25,26822-V.................25823-V.................259025..................1420659................2421934................24CFI-683100........28CFI-683101........28CFI-683260........29CFI-683300........29CFI-683407........28CFI-683410........28CFI-683411........28CFI-683427........28CFI-683440........29CFI-683460........29CFI-683550........29 CFI-683565........29CFI-NST..............28CFI-TCV..............28CFI-AWCM.........27CFI-AWCF...........27CFI-LSFF.............27CFI-LSFM...........27CFI-SPLF.............27CFI-SPLM...........27CFI-MIBB-100....21CFI-MIBB-101....21

INDEX

TABL

E OF C

ONTE

NTS

TORSO AND BODY POSITIONERS

PAGE 6

EXTREMITY POSITIONERS

PAGE 8

HEAD & NECK POSITIONERS

PAGE 11

PEDIATRICS POSITIONERS

PAGE 15

GENERAL POSITIONERS

PAGE 17

MISCELLANEOUS ITEMS

PAGE 27

SPECIALTYPROCEDURE ITEMS /

TABLE PADSPAGE 21

WEIGHTEDIMMOBILIZATION

PAGE 23

VETERINARYPOSITIONING

PAGE 25


PAGE 6


PAGE 6


PAGE 8


PAGE 8


PAGE 11


PAGE 11


PAGE 15


PAGE 15

GENERAL POSITIONERS

PAGE 17

GENERAL POSITIONERS

PAGE 17


PAGE 23


PAGE 23


PAGE 25


PAGE 25


TABLE PADSPAGE 21


TABLE PADSPAGE 21

MISCELLANEOUS ITEMS

PAGE 27

MISCELLANEOUS ITEMS

PAGE 27

Our line of lead aprons are uniquely designed to help distribute the weight between the waist and the shoulders. HX lightweight material is 28% lighter than lead and still .50mm Pb equivalent at 75-130kVp under direct beam. GL (“Greenlite”) lead free material is 41% Pb equivalent at 75-130kVp under direct beam

We offer a variety of different aprons in 40 colors and designs available from X-Small to X-Large.

For more information see page 27.

Accurate measurements are made possible from a finished radiograph when the Macklin Radiographic Ruler is placed under patient anatomy prior to radiographic exposure. Can be used with fluoroscopy to accurately place invasive devices. Suggested range is 40 to 100 kVp. Supplied non-sterile.


FEATURED PRODUCT: LEAD APRONS

FEATURED PRODUCT: RADIOGRAPHIC RULER

Our X-Ray Markers clearly, easily, and effectively identify your radiographs. We offer different character sizes for spelling words up to six letters long. Our left and right positioning markers are available in either English or French. We also offer a large selection of both mounted and unmounted markers.


FEATURED PRODUCT: LEAD MARKERS

• Open-cell foam• Radiolucent• Fire-retardant• Economic general positioning

• Firm closed-cell foam• Resists fluid absorption/contamination• Certain parts may require gluing to obtain

complex dimenstions (Glue joints may attenuate)

• Frost-colored vinyl cover for standard foam positioning devices

• Heat-sealed to prevent fluid absorption/contamination (Not recommended for low KVP)

• Extremely durable blue vinyl cover for standard foam positioning devices

• Heat-sealed to prevent fluid absorption/contamination (Not recommended for low KVP) )

• Strong, state-of-the-art sprayed vinyl coating: withstands normal clinical use without tearing

• Very low attenuation and skid resistant• Resists contamination (Edges may show in low KVP)

PositionPerfect™ Patient Positioning Devices CFI Medical Solutions Position Perfect™ products ensure proper patient positioning, critical to

accurate diagnosis, and minimize the number of retakes, thereby reducing exposure, lowering imaging costs and increasing traffic through imaging suites.

The Power of Selection CFI offers a vast selection of latex-free imaging accessories to meet your exact needs, as well as

custom product ordering engineered specifically to your own requirements. To custom order a product, fill out the forms located throughout this catalog and fax or mail them to:

CFI Medical Solutions 14241 Fenton Road Fenton, MI 48430 Fax: 810.750.5310

Standard Foam

Ultra Foam (-UF)

Standard Vinyl Cover (-8)

Heavy Duty Vinyl Cover (-20)

Scancoat Black & White (-SCB; -SCW)

HealthCare Fabric (HCF) • Light-weight; 4-way stretch properties• Soft, comfortable feel• Anti-Bacterial; Anti-Fungal• Black

Send sales requests to: [email protected] order requests to: [email protected]

-UF Ultra Foam -8 Standard Vinyl Cover -SCB Scancoat Black-20 Heavy Duty Vinyl CoverLEGEND: -SCW Scancoat WhiteP 810.750.5300F 810.750.5310

CFI Medical SolutionsContour Fabricators Inc.

[email protected]

-8 -SCW-SCB-UF-20 -8 -SCW-SCB-UF-20

-8 -SCW-SCB-UF-20 -8 -SCW-SCB-UF-20

-8 -SCW-SCB-UF-20

-SCW-SCB

-8 -SCW-SCB

-SCW-SCB

-UF-20

-HCF

-HCF-HCF

-HCF

-HCF

-HCF Healthcare Fabric

A

BC

“ A (height)

“ B (width)

“ C (length)

-8 -SCW-SCB-UF-20

Rectangle

Wedge Other

Cylinder

DimensionsType

Sketch your custom product here:

TORSO & BODY POSITIONERS

Torso Block[Part #100- 7”H x 16”W x 12”L]• Dorsal spine support• Lumbar spine support

Bolsters[Part #115- 5”H x 7”W x 15”L][Part #124- 6.6”H x 9”W x 18”L]• Knee and back support• Myelogram needle stabilizer

Spinal Wedges[Part #145- 7”H x 7”W x 21.25”L]• Oblique spine support

(Note: see more wedges on page 18)

Angular Bolsters[Part #107- 7.25”H x 12.5”W x 21”L]

[Part #109- 7.25”H x 12.5”W x 15”L]• Torso and aortogram• Mammography procedures

Please send CFI a completed copy of this page explaining your product needs. A CFI representative will contact

you to provide a quote or to obtain additional details if necessary. Fax completed page to 810.750.5310 or call at 810.750.5300. The following configurations may be available based on the shape of the part:

CUSTOM PRODUCT ORDERINGSend sales requests to: [email protected] order requests to: [email protected]

P 810.750.5300F 810.750.5310


[email protected]

-8 -SCW-SCB-UF-20

-SCW-SCB

-8 -SCW-SCB

-SCW-SCB

-UF-20-HCF -HCF

-8 -SCW-SCB-UF-20 -SCW-SCB-HCF

Cylinders[Part #146- 6”D x 12”L][Part #153- 4.25”D x 12”L]• Abdominal compression

during kidney biopsies

Myelography Block[Part #150- 14”H X 22”W X 10”L]• Abdomen elevation for

proper contrast flow

Lumbar Supports[Part #160- 3”H x 10”W x 10”L][Part #161- 4”H x 10”W x 10”L][Part #162- 5”H x 10”W x 10”L]• Spine positioning

Rounded Shoulder Support[Part #438- 9.5”H x 17”W x 20.75”L]• Provides comfort when patients

must extend arms out of the field of view while lying supine

Winged Shoulder Support[Part #439- 10.3”H x 19”W x 14.6”L]• Provides comfort when

patients must extend arms out of the field of view while lying supine

Cardiac Support[Part # 195- 14”H x 28”W x 16”L]• Cardiac procedures

-UF -SCB -SCW -UF -SCB -SCW

-UF Ultra Foam -8 Standard Vinyl Cover -SCB Scancoat Black-20 Heavy Duty Vinyl CoverLEGEND: -SCW Scancoat White -HCF Healthcare Fabric

-UF -SCB -SCW -UF -SCB -SCW

A

A

BC

BC

“ A (height)

“ B (width)

“ C (length)

-8 -SCW-SCB-UF-20

Rectangle

Wedge Other

Cylinder

DimensionsType

-HCF



Lateral Finger Block R. Hand[Part #428- 3.2”H x 6”W x 6.25”L]

• Positions fingers and wrist in a lateral plane. Excellent for individual finger studies

Dual Oblique Finger Block[Part #430- 3.13”H x 10.88”W x 5”L]• Right and left oblique hand

imaging

Lateral Finger Block L. Hand[Part #429- 3.2”H x 6”W x 6.25”L]

• Positions fingers and wrist in a lateral plane. Excellent for individual finger studies

Please send CFI a completed copy of this page explaining your product needs. A CFI representative will contact you

to provide a quote or to obtain additional details if necessary. Fax completed page to 810.750.5310 or call at 810.750.5300. The following configurations may be available based on the shape of the part:


Oblique Finger Block[Part #121- 3.13”H x 5.5”W x 5”L]• Right and left oblique hand

imaging

Dual Lateral Finger Block[Part #431- 3.25”H x 5.94”W x 12”L]• Positions fingers and wrist in

a lateral plane. Excellent for individual finger studies on both hands simultaneously

Cross-Table Lateral Leg Block[Part #203- 10”H x 14”W x 16”L]• Used for comparative studies

of legs

Adjustable Leg Positioner B [Part #221- 14.75”W Adjustable

Height] [Coated]• Infinite adjust ability through

a patented strap system

Leg Brace[Part #427- 7”H x 10”W x 10”L]• Contoured cavity keeps legs

in place• Used with a cast for comfort

Adjustable Leg Positioner A[Part #218- 6”H x 14.5”W x 20”L] [Coated]• Allows the patient’s legs to be

adjusted to 3 different heights• Radiused based

Knee Arthography Block[Part #209- 8”H x 12”W x 10”L]• Facilitates immobilization and

effective knee flexion during arthrography


-SCW-SCB-SCW-SCB-UF

Leg Immobilizer[Part #401- 6”H x 14”W x 16”L]• Positions and immobilizes

lower extremities during venogram or arteriogram exams

Leg Rest with Knee CutoutsPart #192- SMALL 5” x 18” x 15”Part #193- MEDIUM 7” x 13” x 17.5”Part #194- LARGE 10” x 24” x 18”

FEATURED ITEM: LEAD MARKERS[Call your CFI Sales Representative for part #’s and pricing]• Different character sizes for spelling words• Left and right markers available in english or french• Mounted Markers• Unmounted Markers

P 810.750.5300F 810.750.5310


[email protected]

-8 -SCW-SCB-UF-20

-8 -SCW-SCB-UF-20

-8 -SCW-SCB-UF-20

-8 -SCW-SCB-UF-20

-8 -SCW-SCB-UF-20

-HCF

-HCF-HCF

P 810.750.5300F 810.750.5310


[email protected]

A

BC

“ A (height)

“ B (width)

“ C (length)

-8 -SCW-SCB-UF-20

Rectangle

Wedge Other

Cylinder

DimensionsType

-HCF

-HCF



Basal Block[Part #101- 7”H x 16”W x 12”L]• Skull work as well as lateral

knees, ankles, and legs

AP-PA Head Holder[Part #102- 6.75”H x 11.75”W x 10”L]• Holds patient’s head in several

positions allowing multiple shots

Pressure Block[Part #104- 5.5”H x 7.3”W x 10”L]• Special procedure skull work

Circular Discs[Part #112- 1.5”H x 7” Diameter][Part #149- 2.5”H x 7” Diameter]• Lifts the skull to properly

position the spine

CUSTOM PRODUCT ORDERING

Please send CFI a completed copy of this page explaining your product needs. A CFI representative

will contact you to provide a quote or to obtain additional details if necessary. Fax completed page to 810.750.5310 or call at 810.750.5300. The following configurations may be available based on the shape of the part:

Send sales requests to: [email protected] order requests to: [email protected]

-8 -SCW-SCB-UF-20


-8 -SCW-SCB-UF-20

-SCW-SCB-UF -SCW-SCB

-HCF-HCF

-8 -SCW-SCB-UF-20 -SCW-SCB-HCF -UF

Concave Discs[Part #163- 1.5”H x 7” Diameter][Part #164- 2.5”H x 7” Diameter][Part #165- 3”H x 7” Diameter]• General skull work

Head and Neck Rest[Part #119- 6”H x 7”W x 11”L]• Special procedure skull work• Therapy and emergency

situations

Cervical Head Rest[Part #133- 4.25”H x 4.75”W x 8”L]• General skull work

Head and Neck Support[Part #132- 6.5”H x 10”W x 12”L]• General skull work

Oblique Cervical Skull Block[Part #205- 8”H x 12”W x 10”L]• Positions skull comfortably at 45˚

oblique spine

4-in-1 Lateral Skull Cube[Part #207]• Flip cube to appropriate height• [5”] [6”] [7”] [8”]

P 810.750.5300F 810.750.5310


[email protected]

-SCW-SCB-UF

-SCW-SCB

-SCW-SCB

-UF

-SCW-SCB

-SCW-SCB

-UF-8-HCF

Head Paddle[Part #300- 7” Diameter X 1.5”H] [Packaged in pairs]• Thick foam pads are attached

to rigid plastic bases

Head-Ends™[Part #303- 6”H x 8”W x 9.7”L][Packaged in pairs]• Unique skull immobilization• 15lb weights fastened to vinyl

covered foam pads

Waters Positioner[Part #405- 7.4”H x 12.4”W x 8”L}• Laminographs of the orbital and

facial bones

Dual Lateral Skull Block[Part #407- 4”W x 11.75”H x 12”L}• Both right & left lateral views• Used for trauma• Routine skull work

AP-PA Head Immobilizer[Part #408- 7”H x 11”W x 9.25”L]• Immobilize traumatized patients• Excellent for E. R. use• Can be taped to a table

AP Head Immobilizer[Part #409- 5”H x 9.75”W x 16”L]• Includes a Velcro strap• Used for positioning or

immobilization

P 810.750.5300F 810.750.5310


[email protected]


Head-Ends™ Replacement Kit[Part #309- 6”W x 8”H x 3”L]• Two vinyl covered pads are

mounted to rigid plywood backing with pre-drilled screw holes for replacement

Coronal Head Holder[Part #9025- 7”H x 16”W x 12”L]• Allows patients to rest

comfortably in prone position• Made of clear 1/4” acrylic with

two coated foam pads

Accurate measurements are made possible from a finished radiograph when the Macklin Radiographic Ruler is placed under patient anatomy prior to radiographic exposure. Can be used with fluoroscopy to accurately place invasive devices. Suggested range is 40 to 100 kVp. Supplied non-sterile.Possible applications include:

• Placing vena cava filters • Measuring the location of incompetent perforating veins from a fixed external point • Assessing in-situ grafts post-op to ensure that all perforating veins have been ligated • Locating a stenosis relative to bifurcations or bony landmarks • Locating external sphincter prior to prostatic balloon dilation

FEATURED ITEM: RADIOGRAPHIC RULER

-SCW-SCB-8 -SCW-SCB-UF-20-HCF

Infant (425) Includes:Up to 3 Months

Child (426) Includes:4 months to 3 yearsDescription


Infantainer[Part #421- 9.29”H x 13.25”W x 25”L]• Completely immobilizes child for lateral and AP radiology.• Made of lightweight Plexiglas™ with adjustable Velcro closures• Vertical and horizontal cassette holders

Child AP-PA Head Holder[Part #127- 6.75”W x 7”H x 11”L]• Comfortably holds head in

multiple positions allowing multiple shots

Child Myelography Block[Part #148- 10”W x 8”H x 14”L]• Elevates abdomen for proper

contrast media flow

The Complete Hugger UnitPart# 425 [Up to 3 month old]Part #426 [4 months up to 3 years old] Provides womb-like warmth and

security during immobilization. The Hugger Complete includes one of each of the following items: foam insert, Plexiglas™ base, head restraint, body wrap with arm straps, and leg straps. Available in infant and small children sizes. The chart to the right describes what parts come with each unit.

Foam Insert

Plexiglas Base

Head Restraint

Body Wrap w/arm straps

Leg Straps

425-A

425-B

425-C

425-D

425-E

426-A

426-B

426-C

426-D

426-E

NOTE: Parts can be ordered individually


-SCW-SCB-UF

-SCW-SCB-UF -SCW-SCB-UF

Pediatric Dual Oblique FingerBlock[Part #301- 1.63”H x 6.38”W x 2.38”L]• Separation of fingers for

overhead lateral views of both hands or individual finger studies

Pediatric Dual Lateral Finger Block[Part #302- 2.25”H x 4”W x 8”L]• 45˚ oblique for both hands

for comparative studies or individual finger studies

AP-PA Head Immobilizers[Part #304- Infant 6”H x 6”W x 8”L][Part #305- Child 6.5”H x 7.5”W x 9.5”L]• Both infant and child AP-PA head

immobilizers provide AP-PA views

Pediatric General Compression Band[Part #306- 0.5”H x 8”W x 30”L]• Place over any area for

extremities, torso, and lateral skulls

Pediatric Sand Bag Kit[Part #307- 7.5”W x 18”H] [Set of 3]• Heat-sealed frost vinyl cover

prevents contamination and resists staining.

• Bags are 7lbs. each

Pediatric AP-PA Hand/Foot Immobilizer[Part #308- 1.44”H x 11.25”W x 6”L]• For use with 8” x 10” cassette• Vinyl components are heat-

sealed

Part #16 Pediatric Kit12 pieces, 8 part numbersIncludes: (1) 301 pediatric dual oblique finger block 1.63”H x 6.38”W x 2.38”L; (2) 302 pediatric dual lateral finger block 2.25”H x 4”W x 8”L; (2) 303 pediatric head ends; (1) 304 head immobilizer infant 6”H x 6”W x 8”L; (1) 305 head immobilizer child 6.5”H x 7.5”W x 9.5”L; (1) 306 pediatric general compression band 0.5”H x 8”W x 30”L; (3) 307 pediatric sand bag kit set of (3) 7.5”W x 18”H; (1) 308 pediatric AP-PA hand/foot immobilizer 1.44”H x 11.25”W x 6”L

P 810.750.5300F 810.750.5310


[email protected]

A

A

BC

BC

“ A (height)

“ B (width)

“ C (length)

-8 -SCW-SCB-UF-20

Rectangle

Wedge Other

Cylinder

DimensionsType

-HCF


GENERAL POSITIONERS

Please send CFI a completed copy of this page explaining your product needs. A CFI representative will contact you to provide a quote or

to obtain additional details if necessary. Fax completed page to 810.750.5310 or call at 810.750.5300. All rectangle and wedge blocks (excluding part #154) are available in the following configurations:

Part #103 Rectangle[3”H x 8”W x 12”L]

Part #126 Rectangles (4)(1) 0.5”H x 4”W x 6”L(1) 1”H x 4”W x 6”L(1) 1.5”H x 4”W x 6”L(1) 2”H x 4”W x 6”L

Part #122 22˚ WedgesSet of 2[3.5”H x 7”W x 8”L]

Part #114 Rectangle[2”H x 7.5”W x 9.5”L]

Part #108 45˚ Wedge[5”H x 5”W x 15”L]

Part #111 45˚ Wedge[6.75”H x 6.75”W x 7.25”L]

Part #110 45˚ WedgesSet of 2[3”H x 3”W x 7.25”L]

Part #117 16˚ WedgesSet of 2[2.5”H x 7”W x 8”L]


Part #105 18.75˚Wedges (Set of 2)[3.75”H x 9”W x 8”L]

Part #106 45˚ Wedge[3”H x 7.5”W x 10”L]

Part #113 12˚ Wedges[2.25”H x 9.5”W x 7.25”L]

Part #116 34˚ WedgesSet of 2[3”H x 4”W x 7”L]

Part #118 45˚ Wedge[7”H x 7”W x 7”L]

Part #120 18˚ Wedge[2.5”H x 8”W x 7”L]

Part #123 33˚ Wedge[6.6”H x 9”W x 12”L]


Part #128 13.5˚ Wedge[3”H x 10”W x 10”L]

Part #158 15˚ WedgesSet of 2 [3”H x 11”W x 7”L]]

Part #169 DecubitusBlock[3”H x 7.5”W x 10”L]

Part #141 45˚ SpinalWedge[9”H x 9”W x 30”L]

Part #136 12.5˚ Wedge[2.25”H x 8”W x 10”L]

Part #129 21˚ Wedge[4.6”H x 10”W x 10”L]

Part #138 21˚ Wedge[3.75”H x 8”W x 10”L]

Part #130 45˚ Wedge[10”H x 10”W x 10”L]

Part #139 45˚ Wedge[7”H x 7”W x 10”L]

Part #140 27˚ Wedge[6”H x 10”W x 10”L]

Part #105 20˚Wedges (Set of 2)[4”H x 11”W x 7”L]

Part #196 & Part #20135˚/ 55˚ Wedge[9.75”H x 6.75”W x 24”L][11”H x 7”W x 30”L]

Part #191 45˚ Wedge[7”H x 7”W x 24”L]

Part #145 45˚ SpinalWedge[7”H x 7”W x 24”L]


Part #142 Rectangle[3”H x 4.75”W x 9.5”L]

Part #143 Rectangle[4.75”H x 4.75”W x 9.5”L]

Part #144 45˚ Wedge[7”H x 7”W x 14”L]


Part #152 DecubitisBlock[3”H x 14”W x 18”L]

Part #154 Thin MatsSet of 2[.25”H x 18”W x 24”L][Only available in raw foam]

P 810.750.5300F 810.750.5310


[email protected]

-8 -SCW-SCB-UF-20

-SCW-SCB-UF

-8 -SCW-SCB-UF-20

-8 -SCW-SCB-UF-20

-8 -SCW-SCB-UF-20

-SCW-SCB-UF

-SCW-SCB-UF

-SCW-SCB-UF

-HCF

-HCF

-HCF

-HCF

Part #1 Deluxe Kit13 pieces, 9 part numbers Includes: (2) 110 wedges 3”H x 3”W x 7.25”L; (1) 111 wedge 6.75”H x 6.75”W x 7.25”L; (1) 112 circular disc 1.5”H x 7”D; (2) 113 wedges 2.25”H x 9.5”W x 7.25”L; (1) 114 rectangle 2”H x 7.5”W x 9.5”L; (1) 151 decubitus block 4”H x 18”W x 24”L; (2) 153 cylinders 12”H x 4.25”D; (2) 154 thin mattresses .25”H x 18”W x 24”L; (1) 171 table pad 1”H x 24”W x 10”L (NOTE: part #154 is always uncovered raw foam and part #171 is never coated)

Part #2 Large Kit8 pieces, 7 part numbers Includes: (1) 100 torso block 7”H x 16”W x 12”L; (1) 101 basilar block 7”H x 16”W x 12”L; (1) 102 adult AP-PA head holder; (1) 104 pressure block 5”H x 7.3”W x 10”L; (2) 105 wedges 3.75”H x 9”W x 8”L; (1) 106 wedge 6.6”H x 6.6”W x 12”L; (1) 169 rectangle 3”H x 7.5”W x 10”L

Part #3 Small Kit7 pieces, 5 part numbers Includes: (2) 110 wedges 3”H x 3”W x 7.25”L; (1) 111 wedge 6.75”H x 6.75”W x 7.25”L; (1) 112 circular disc 1.5”H x 7”D; (2) 113 wedges 2.25”H x 9.5”W x 7.25”L; (1) 114 rectangle 2”H x 7.5”W x 9.5”L

Part #4 Kit A7 pieces, 5 part numbers Includes: (1) 112 circular disc 1.5”H x 7”D; (1) 114 rectangle 2”H x 7.5”W x 9.5”L; (2) 116 wedges 3”H x 4”W x 7”L; (2) 117 wedges 2.5”H x 7”W x 10”L; (1) 118 wedge 7”H x 7”W x 7”L

Part #5 Kit B8 pieces, 6 part numbers Includes: (1) 112 circular disc 1.5”H x 7”D; (1) 114 rectangle 2”H x 7.5”W x 9.5”L; (2) 116 wedges 3”H x 4”W x 7”L; (2) 117 wedges 2.5”H x 7”W x 10”L; (1) 118 wedge 7”H x 7”W x 7”L; (1) 121 oblique finger block

Part #6 Kit C5 pieces, 5 part numbers Includes: (1) 100 torso block 7”H x 16”W x 12”L; (1) 102 adult AP-PA head holder; (1) 104 pressure block 5”H x 7.3”W x 10”L; (1) 114 rectangle 2”H x 7.5”W x 9.5”L; (1) 121 oblique finger block

Part #7 Kit D4 pieces, 4 part numbers Includes: (1) 128 wedge 3”H x 10”W x 10”L; (1) 129 wedge 4.6”H x 10”W x 10”L; (1) 130 wedge 10”H x 10”W x 10”L; (1) 140 wedge 6”H x 10”W x 10”L

Part #8 Kit E10 pieces, 10 part numbers Includes: (1) 101 basilar block 7”H x 16”W x 12”L; (1) 102 adult AP-PA head holder; (1) 104 pressure block 5”H x 7.3”W x 10”L; (1) 128 wedge 3”H x 10”W x 10”L; (1) 129 wedge 4.6”H x 10”W x 10”L;(1) 130 wedge 10”H x 10”W x 10”L; (1) 131 square 4”H x 10”W x 10”L; (1) 136 wedge 2.25”H x 8”W x 10”L; (1) 138 3.75”H x 8”W x 10”L; (1) 140 wedge 6”H x 10”W x 10”L


-SCW-SCB-UF

-SCW-SCB-UF

-SCW-SCB-UF

-SCW-SCB-UF

-SCW-SCB-UF

-SCW-SCB-UF

-8 -SCW-SCB-UF-20-HCF

Part #9 Rectangle Kit12 pieces, 1 part numberIncludes: (12) 126 [3] .5”H x 4”W x 6”L [3] 1”H x 4”W x 6”L [3] 1.5”H x 4”W x 6”L [3] 2”H x 4”W x 6”L

Part #10 Kit F6 pieces, 6 part numbers Includes: (1) 101 basilar block 7”H x 16”W x 12”L; (1) 102 adult AP-PA head holder; (1) 104 pressure block 5”H x 7.3”W x 10”L; (1) 131 square 4”H x 10”W x 10”L; (1) 136 wedge 2.25”H x 8”W x 10”L; (1) 138 wedge 3.75”H x 8”W x 10”L

Part #11 Special Procedure Skull Kit4 pieces, 4 part numbers Includes: (1) 405 waters positioner; (1) 406 ear laminograph block; (1) 407 dual lateral skull block; (1) 408 AP-PA head immobilizer

Part #14 Ortho Kit5 pieces, 5 part numbersIncludes: (1) 102 adult AP-PA head holder; (1) 121 oblique finger block; (1) 133 cervical head rest; (1) 145 wedge 7”H x 7”W x 21.25”L; (1) 169 rectangle 3”H x 7.5”W x 10”L

Part #15 Kit I7 pieces, 7 part numbers Includes: (1) 127 child AP-PA head holder; (1) 132 head/neck support 6.5”H x 10”W x 12”L; (1) 133 cervical head rest; (1) 136 wedge 2.25”H x 8”W x 10”L; (1) 138 wedge 3.75”H x 8”W x 10”L; (1) 139 wedge 7”H x 7”W x 10”L; (1) 169 rectangle 3”H x 7.5”W x 10”L

Part #17 Routine X-Ray Kit10 pieces, 7 part numbers Includes: (1) 112 circular disc 1.5”H x 7”D; (1) 114 rectangle 2”H x 7.5”W x 9.5”L; (2) 116 wedges 3”H x 4”W x 7”L ; (2) 117 wedges 2.5”H x 7”W x 10”L; (1) 118 wedge 7”H x 7”W x 7”L; (1) 121 oblique finger block; (2) 122 wedges 3.5”H x 7”W x 8”L

Part #19 Standard R&F Kit8 pieces, 7 part numbers Includes: (1) 111 wedge 6.75”H x 6.75”W x 7.25”L; (1) 112 circular disc 1.5”H x 7”D; (2) 113 wedges 2.25”H x 9.5”W x 7.25”L; (1) 114 rectangle 2”H x 7.5”W x 9.5”L; (1) 121 oblique finger block; (1) 133 cervical head rest; (1) 145 wedge 7”H x 7”W x 21.25”L

Part #422 Block Hanger KitProvides fast on/off the wall storage of Position Perfect™ positioning aids. The kit includes Velstick and 8 Velcoins for adhesion.

P 810.750.5300F 810.750.5310


[email protected]

SPECIALTY ITEMS / TABLE PADS

E-Z Strap[Part #135- 1.5” x 30’ roll]• White Velcro• Hook & loop• May be washed and sterilized

Restraint Belt[Part #168- 5”W x 72”L]• Secures patient to table or

chair• May be washed and sterilized

Decubitus Block with Film Casette Holder[Part #204- 12”H x 18”W x 22”L]• Support and spine correction

for laterals and decubitus

Weight-Bearing Cassette Holder[Part #199- 2”H x 12”W x 18”L]• Facilitates longitudinal arch

and lateral projection studies

Auto-Traction Strap[Part #208- 50”L with 14” [Adjustable Wrist Straps]• Images cervical vertebrae• Supine position and lateral view• Patient applies equal traction by

extending legs

Slapper™ Non-slipCassette Holder[Part #211- 3.25”H x 10”W x 16.25”L]• Cross-table laterals• Adapts to all cassette sizes• Lightweight

[Part #CFI-MIBB-100 Body Band includes 2 brackets and 1 band.][Part #CFI-MIBB-101 Body Band only. 61 1/2”L, 8 1/2”W tapers to 4” (10 cm).]Used with most standard x-ray tables and upright wall buckey units. The brackets are manufactured from stainless steel, the band is made of 100% water resistant, washable nylon and velcro. Reusable. Supplied non-sterile.

• Assists in securing patient to table • Restraint device for un-cooperative or pediatric patients • Immobilizes for proper and precise positioning • Radiolucent

BODY BAND

P 810.750.5300F 810.750.5310


[email protected]


G F A

B

E

D

C = THICKNESS

A B

G

C

D E F

Foam PadOnly

-20

Cover Onlywith closure

-8

Pad & StandardCover

Pad & HeavyDuty Cover

Size

Part # Size Application-20

Foam Type:Cover/Coating:

170

171

172

173

174

175

176

180

181

182

183

184

185

186

170-180

171-181

172-182

173-183

174-184

175-185

176-186

170-20

171-20

172-20

173-20

174-20

175-20

176-20

1.5”H x 21”W x 42”L

1”H x 24”W x 72”L

1.25”H x 26”W x 78”L

1.5”H x 27”W x 78”L

1”H x 21”W x 42”L

1”H x 24”W x 60”L

1”H x 27”W x 78”L

STANDARD TABLE PADS AND COVERS

NOTE: Covers ordered seperately have zipper closure.

[Part #219- 7”Diameter x 16” Long]Invented by Radiology TechnologistA simple, low cost, easy to use alternative to the Merchant Board. Extends the patient’s reach by approximately

6 inches. The Sunrise Extender is an easy to clean, vinyl covered foam cylinder with two evenly spaced straps. On the end of each strap is a detachable extrusion which clips into any size cassette. The Sunrise Extender requires no installation, saving your facility hundreds of dollars!

PREMIUM HEAVY DUTY TABLE PADS

520

530

1”H X 24”W X 72”L

1”H X 19”W X 72”L

Grommets are located at the top for hanging. Cross-hair centering helps to easily position the patient. Also available without grommets.

SUNRISE EXTENDER

CUSTOM PART ORDER FORM

P 810.750.5300F 810.750.5310


[email protected]

A (height)

B (width)

C (weight in lbs.)

Vinyl

Yes No

Foam

DimensionsType

Grommet

B

A

C = Weight(in lbs.)

Foam Silica Sand BagsFoam silica sand bags are double stitched to extend the life of the bag[NOTE: All sand bags are available without grommets]Part #500- 7”W x 7”L, 3lbs. [includes grommets] Part #501- 6”W x 17”L, 7lbs. [includes grommets]Part #502- 7”W x 24”L, 12lbs. [no grommets] Part #503- 11.5”W x 11.5”L, 13lbs. [no grommets]

Vinyl Silica Sand BagsHeavy-duty vinyl, silica sand bags, cleanable, heat-sealed to prevent leakage[NOTE: All sand bags are available without grommets]Part #556- 7”W x 7”L, 3lbs. [includes grommets] Part #557- 6”W x 17”L, 7lbs. [includes grommets]Part #558- 7”W x 24”L, 12lbs. [no grommets] Part #559- 11.5”W x 11.5”L, 13lbs. [no grommets]

Foam Silica Sand Bag Kit[Part #510] 7 pieces, 4 part numbersIncludes: (2) 500-[7”W x 7”L 3lbs.]; (2) 501-[6”W x 17”L 7lbs.]; (2) 502-[7”W x 24”L 12lbs.]; (1) 503-[11.5”W x 11.5”L 13lbs.]

WEIGHTED IMMOBILIZATION

Please send CFI a completed copy of this page explaining your product needs. A CFI representative will contact you to provide a quote or to

obtain additional details if necessary. Fax completed page to 810.750.5310 or call at 810.750.5300. NOTE: All sand bags are available without grommets.


NOTE: Max weight of sand bag dependant on size


Vinyl Silica Sand Bag Kit[Part #555] 7 pieces, 4 part numbersIncludes: (2) 556-[7”W x 7”L 3lbs.]; (2) 557-[6”W x 17”L 7lbs.]; (2) 558-[7”W x 24”L 12lbs.]; (1) 559-[11.5”W x 11.5”L 13lbs.]

Cervical Sand Bags[Part #504- 11” x 11” 10lbs. each]Packaged in sets of 2Durable nylon construction, bacteria and odor resistant, non-absorbent, and easily cleaned.

Femoral Weights[Note: The following products contain lead and are NOT MRI compatible]Provides localized pressure on the cut-down site of patients following catherization studiesMade of durable double layered vinyl. Will not leak and are easily cleaned.Part #505- 3”W x 9”L 5lbs.Part #21934- 5”W x 9”L 8lbs.Part #20659- 6”W x 17”L 10lbs.

P 810.750.5300F 810.750.5310


[email protected]

A

BC

“ A (height)

“ B (width)

“ C (length)

-8 -SCW-SCB-UF-20

Rectangle

Wedge Other

Cylinder

DimensionsType

-HCF

-8


-20

-8-20

-8-20

Body Cradles[Part #802-V-Large: 8”H x 16”W x 24”L][Part #803-V-Small: 6”H x 12”W x 18”L]Radiolucent body cradles provide fullbody positionings and support for bothsmall and large breeds

Skull PositionerPart #804-VLarge: [6.5”H x 7.5”W x 10.5”L]Radiolucent skull positioners provide head positioning and support for small or large breeds for AP-PA lateral views

Bolster[Part #816-V 7”H x 10”W x 18”L]Used for general head or body position-ing for a wide variety of imaging views

Large U-Block[Part #818-V- 7.25”H x 14”W x 11”L]Used for general head or body position-ing for a wide variety of imaging views

Vet Echo Mattress[Part #822-V 6”H x 18”W x 39”L]Mattress with cutout used for ultrasound procedures. Made with heavy, durable cover

VETERINARY POSITIONING

Please send CFI a completed copy of this page explaining your product needs. A CFI representative will contact you to provide a quote or to obtain additional details if necessary. Fax completed page to 810.750.5310 or call at

810.750.5300. The following alternatives may be available based on the shape of the part:

CUSTOM PRODUCT ORDERING

Feline Neuter BlockPart #823-V[3.53”H x 9.07”W x 25.20”L] [Coated]Device used to immobilize cats and other small animals during neutering procedures. Comes standard coated Scancoat Black

-UF Ultra Foam -8 Standard Vinyl Cover -SCB Scancoat Black-20 Heavy Duty Vinyl CoverLEGEND: -SCW Scancoat White

-8-20-8-20

-8-20

-8-20

ID# 810-V Large Vet Set16 pieces, 7 part numbersIncludes: (1) 117 Set of 2 wedges 2.5”H x 7”W x 10”L; (2) 118 wedge 7”H x 7”W x 7”L; (1) 122 Set of 2 wedges 3.5”H x 7”W x 8”L; (2) 139 wedges 7”H x 7”W x 10”L; (1) 801-V; (1) 812-V; (1) 813-V

ID# 814-V Everyday Vet Set9 pieces, 6 part numbersIncludes: (1) 116 Set of 2 wedges 3”H x 4”W x 7”L; (1) 154 Set of 2 thin mattresses .25”H x 18”W x 24”L; (1) 815-V; (1) 816-V; (1) 817-V; (1) 818-V

19˚ TriangleSet of 2 [Part #815-V 3”H x 7”W x 8”L]Wedges and rectangles are used for corrective positioning of the skull, torso, and extremities

Rectangle SetSet of 4 [Part #813-V 1”H x 4”W x 4”L]

ID# 808-V General Vet Kit16 pieces, 5 part numbersIncludes: (1) 117 Set of 2 wedges 2.5”H x 7”W x 10”L; (2) 118 wedges 7”H x 7”W x 7”L; (2) 139 wedges 7”H x 7”W x 10”L; (2) 126 sets of 4 rectangles; (1) 801-V

ID# 809-V Small Animal Kit12 pieces, 3 part numbersIncludes: (1) 105 Set of 2 wedges 2.5”H x 7”W x 10”L; (1) 113 Set of 2 12° cranial wedges 2.25”H x 9.5”W x 7.25”L; (2) 126 Set of 4 rectangles

VETERINARY KITS

P 810.750.5300F 810.750.5310


[email protected]

AWCM Weight AdjusterPart #CFI-AWCM

• Shoulder pads for comfort • Attaches in front w/ velcro • HX lightweight material

AWCF Weight AdjusterPart #CFI-AWCF

• GL (“Greenlite”) lead free material

• Criss-cross closure straps

LSFF Black Belt Front Protection ApronPart #CFI-LSFF

• HX lightweight material • GL (“Greenlite”) lead free • Velcro shoulder closure

LSFM Black Belt Front Protection ApronPart #CFI-LSFM

• 6” wide black belt • Buckles in front • Velcro shoulder closure

SPLF Economy ApronPart #CFI-SPLF

• Front tie straps • Criss-cross tie in front • HX lightweight material

SPLM Economy ApronPart #CFI-SPLM

• Front tie straps • Criss-cross tie in front • GL (“Greenlite) lead free

MISCELLANEOUS PRODUCTS

CFI has recently expanded its product line to offer adjustable, lightweight lead aprons, apron racks, mobile X-Ray barriers, radiology department sanitizing agents, and a host of other great products for your everyday needs. If you’re looking for a specific item not listed in this catalog, please contact us at (810) 750-5300 or fax us at (810) 750-5310.

FEATURED ITEM: LEAD APRONS


Deluxe Mobile Apron RackPart #CFI-683407

• Durable, long lasting finish • Smooth rolling • Heavy guage steel

Budget Saver Mobile ApronRackPart #CFI-683427

• Stores up to 10 aprons • Powder coated • Economically priced

R/H Folding Wall Mounted RackPart #CFI-683100

• Stores up to 5 aprons • Swing out for easy access • Folds flush to the wall

L/H Holding Wall Mounted RackPart #CFI-683101

• Stores up to 5 aprons • Swing out for easy access • Folds flush to the wall

Six Peg RackPart #CFI-683410

• Inexpensive but effective • Electro static powder coated • Requires minimal space

Eight Peg RackPart #CFI-683411

• Inexpensive but effective • Electro static powder coated • Requires minimal space

NST Thyroid CollarPart #CFI-NST

• More flexible • One size fits all • Fully adjustable • Large protection area

TCV Thyroid CollarsPart #CFI-TCV

• One size fits all • Fully adjustable • Large protection area • More flexible

P 810.750.5300F 810.750.5310


[email protected]

Scrubbles Apron CleanerPart #CFI-683550

• Enzyme active formula • Safely cleans radiology stains • Developed for aprons

Scrubbles RX Apron CleanerPart #CFI-683440

• FDA approved • Kills 99.9% of germs • Multi-purpose sanitizer

Lead GlovesPart #CFI-683300

• .50 Pb equivalency • Vinyl outer coverings

“Incredible” Lead GlassesPart #CFI-683260

• Lightweight acrylic frame • .50mm lens lead protection • Lens size 61mm

Mobile BarrierPart #CFI-683460

• Powder coated steel frame • 2.0mm lead equivalent • 4 hospital grade casters

Mobile CurtainPart #CFI-683565

• Adjustable height 36” to 56” • 24”H x 24”W tall lead vinyl

curtain

14241 Fenton RoadFenton, MI 48430

P. 810.750.5300F. 810.750.5310

[email protected]

World HeadquartersFenton Road - Fenton, MI

Research & TechnologyFenway Circle - Fenton, MI

CSYSPPConsumables Manufacturing - China

CFI MEDICAL SOLUTIONS HAS EMERGED AS A GLOBAL LEADER

IN THE DEVELOPMENT & MANUFACTURING OF CUTTING

EDGE MEDICAL ACCESSORIES. FOUNDED IN 1974 IN GRAND

BLANC, MICHIGAN, CFI HAS EXPANDED ITS OPERATIONS

INTERNATIONALLY TO INCLUDE THREE MANUFACTURING

FACILITIES, TOTALING OVER 200,000 SQUARE FEET OF FLOOR

SPACE.

• Engineering and Design (software: Pro Engineer, AutoCAD, SurfCam)

• Research and Development• CNC Saw Equipment• CNC Machining and Routering• CNC 2-Axis Cutting and

Sewing• Sealing: RF, Heat, Impulse,

Ultrasonic• Vacuum Forming• Compression Forming• Urethane Molding• Carbon Fiber• In-House Machine Building• Custom Tool and Die Creation

• Engineering and Design (software: Pro Engineer, AutoCAD, SurfCam)

• Research and Development• CNC Saw Equipment• CNC Machining and Routering• CNC 2-Axis Cutting and

Sewing• Sealing: RF, Heat, Impulse,

Ultrasonic• Vacuum Forming• Compression Forming• Urethane Molding• Carbon Fiber• In-House Machine Building• Custom Tool and Die Creation

CFI MEDICAL SOLUTIONS HAS EMERGED AS A GLOBAL LEADER

IN THE DEVELOPMENT & MANUFACTURING OF CUTTING

EDGE MEDICAL ACCESSORIES. FOUNDED IN 1974 IN GRAND

BLANC, MICHIGAN, CFI HAS EXPANDED ITS OPERATIONS

INTERNATIONALLY TO INCLUDE THREE MANUFACTURING

FACILITIES, TOTALING OVER 200,000 SQUARE FEET OF FLOOR

SPACE.

Documents

INDEX [] · .50mm Pb equivalent at 75-130kVp under direct beam. GL (“Greenlite”) lead free material is 41% Pb equivalent at 75-130kVp under direct beam We offer a variety of different