indeks apdn addendum - SKKMIGASskkmigas.go.id/images/upload/file/58f1dec0965b.pdf · ... usaha hulu migas yang berisi Daftar Barang Diwajibkan ... migas dan melampirkan dokumen pendukung,

i

ii

iii

ivDilarang mengutip, memperbanyak dan menterjemahkan sebagian atau seluruh isi buku tanpa izin tertulis dari Ditjen Migas

Copyright : Subdit Pengembangan Investasi Migas

BUKU APRESIASI PRODUKSI DALAM NEGERI(APDN) 2011 - ADENDUMoleh : Direktorat Jenderal Minyak dan Gas Bumi

i

BUKU APRESIASI PRODUKSI DALAM NEGERI (APDN)

Buku APDN adalah buku acuan penggunaan produksi dalam negeri pada kegiatan usaha hulu migasyang berisi Daftar Barang Diwajibkan, Daftar Barang Dimaksimalkan dan Daftar Barang Diberdayakanserta Daftar Kemampuan Produsen Dalam Negeri yang telah memiliki Surat Kemampuan UsahaPenunjang (SKUP) Migas.

KATEGORI DAFTAR BARANGBerdasarkan data dan informasi yang tercantum dalam SKUP Migas dan sesuai ketentuan yangberlaku, Ditjen Migas bersama BP Migas menyusun daftar barang yang dibagi menjadi 3 (tiga) kategori,yaitu : Daftar Barang Diwajibkan, Daftar Barang Dimaksimalkan dan Daftar Barang Diberdayakan yangditetapkan berdasarkan kriteria sebagai berikut :

• Daftar Barang Diwajibkan adalah daftar barang produksi dalam negeri yang memenuhipersyaratan kualitas (memiliki sertifikat produk dan sertifikat sistem manajemen) danmemiliki nilai TKDN + BMP 40% dan TKDN barang 25 %.

• Daftar Barang dimaksimalkan adalah daftar barang produksi dalam negeri yangmemenuhi persyaratan kualitas (memiliki sertifikat produk dan sertifikat sistemmanajemen) dan memiliki nilai TKDN + BMP < 40% dan TKDN barang 25 %.

• Daftar Barang Diberdayakan adalah daftar barang produksi dalam negeri yangmemenuhi persyaratan kualitas dan memiliki nilai TKDN barang < 25 %.

SKUP MIGASSKUP Migas adalah Surat Kemampuan Usaha Penunjang Migas yang diterbitkan oleh DirektoratJenderal Minyak dan Gas Bumi berdasarkan hasil penelitian dan penilaian kemampuan produksi dalamnegeri yang meliputi : status usaha, kemampuan produksi (hasil produksi, standar/mutu produk,kapasitas produksi, nilai TKDN dan BMP), kemampuan manajemen (mutu/lingkungan/K3), jaringanpemasaran dan pelayanan purna jual.Berdasarkan penelitian, dilakukan penilaian mampu/tidaknya perusahaan memproduksi barang didalam negeri yang ditetapkan berdasarkan skor yang ditunjukkan dengan rating sebagai berikut :

• Mampu dengan rating Bintang 1, apabila nilai 40 sd < 60• Mampu dengan rating Bintang 2, apabila nilai 60 sd < 80• Mampu dengan rating Bintang 3, apabila nilai 80• Tidak Mampu, apabila nilai < 40 (SKUP Migas tidak diterbitkan)

Dasar Hukum :• Undang Undang Nomor 22 Tahun 2001 Tentang Minyak dan Gas Bumi.• Peraturan Pemerintah Nomor 55 Tahun 2009 Tentang Perubahan Kedua Atas Peraturan

Pemerintah Nomor 35 Tahun 2004 Tentang Kegiatan Usaha Hulu Minyak dan Gas Bumi.• Peraturan Presiden Nomor 54 Tahun 2010 tentang Pengadaan Barang /Jasa Pemerintah• Peraturan Menteri ESDM Nomor 27 Tahun 2008 tentang Kegiatan Usaha Penunjang

Minyak dan Gas Bumi.

Manfaat :• Sebagai acuan penggunaan produksi dalam negeri pada pengadaan barang dan/atau

jasa di Kegiatan Usaha Hulu Migas• Sebagai acuan dalam pengendalian impor barang operasi di Kegiatan Usaha Hulu

Migas

i

ii

Tata Cara Pengajuan SKUP Migas :

Perusahaan mengajukan permohonan SKUP Migas, mengisi formulir data kemampuan usahapenunjang migas dan melampirkan dokumen pendukung, antara lain :

• Surat Keterangan Terdaftar (SKT) Migas• Surat Izin Usaha Industri• Persetujuan AMDAL atau UKL/UPL• Sertifikat Manajemen Mutu, Lingkungan, K3• Sertifikat Mutu Produk• Sertifikat TKDN dan BMP• Flow Proses Produksi• Struktur Organisasi• Record Pelayanan Purna Jual• Profil Perusahaan

Surat Permohonan ditujukan kepada :

Direktur Jenderal Minyak dan Gas BumiUp. Direktur Pembinaan Program Migas

Ruang Pelayanan Investasi MigasGedung Ditjen Migas (Plaza Centris) Lt. 1Jl. H.R. Rasuna Said Kav. B 5Jakarta Selatan 12910Telephone : +62.21.5268910 Ext. 172Faksimile : +62.21.5268980Email : [email protected]

ii

iii

iii

KEMENTERIAN ENERGI DAN SUMBER DAYA MINERALDIREKTORAT JENDERAL MINYAK DAN GAS BUMIDIREKTORAT PEMBINAAN PROGRAMMIGAS

SAMBUTAN

Sesuai amanat UU No. 22 Tahun 2001 tentang Minyak dan Gas Bumi, dalam upayamenumbuhkembangkan kemampuan nasional untuk lebih mampu bersaing di tingkatnasional, regional, dan internasional, Badan Usaha dan Bentuk Usaha Tetap harusmengutamakan pemanfaatan tenaga kerja setempat, barang, jasa, serta kemampuanrekayasa dan rancang bangun dalam negeri secara transparan dan bersaing.

Sehubungan dengan telah diterbitkannya Buku Apresiasi Produksi Dalam Negeri (APDN) padatanggal 6 Oktober 2010 dan Surat Edaran Penggunaan Buku APDN Migas dalam KegiatanPengadaan Barang dan Jasa KKKS oleh Deputi Umum BP Migas, Ditjen Migas melakukanpembaharuan terhadap Buku APDN dalam bentuk Adendum.

Adendum Buku APDN ini disusun berdasarkan hasil penelitian dan penilaian kemampuanprodusen dalam negeri dan berisi Daftar barang diwajibkan, dimaksimalkan dandiberdayakan serta 19 kemampuan produsen dalam negeri yang telah memiliki SuratKemampuan Usaha Penunjang (SKUP) Migas yang diterbitkan Ditjen Migas pasca penerbitanBuku APDN hingga Maret 2011.

Diharapkan dengan diterbitkannya Adendum Buku APDN ini dapat menjadi acuan dalampengadaan barang dan jasa di kegiatan usaha minyak dan gas bumi.

Semoga buku ini bermanfaat bagi industri minyak dan gas bumi dan memberikan kontribusimaksimal bagi peningkatan penggunaan produksi dalam negeri sehingga dapat meningkatkankapasitas migas nasional.

Jakarta, 21 April 2011

Direktur Pembinaan Program Migas

Heri Poernomo

iv

DAFTAR ISI

BUKU APRESIASI PRODUKSI DALAM NEGERI (APDN) .......................................................

SAMBUTAN DIREKTUR PEMBINAAN PROGRAMMIGAS ..................................................

DAFTAR ISI .........................................................................................................................

i

iii

iv

INDEKS BERDASARKAN NAMA PERUSAHAAN ……………………………………….………….....

INDEKS BERDASARKAN RATING PERUSAHAAN ……………………………………...................

INDEKS BERDASARKAN KIMAP……………………………………….…………..............................

DAFTAR BARANG BERDASARKAN KATEGORI PENGGUNAAN …………………………….....

Daftar Barang diwajibkan ....................................................................................

Daftar Barang dimaksimalkan .............................................................................

Daftar Barang diberdayakan ...............................................................................

DAFTAR PERUSAHAAN BERDASARKAN JENIS PRODUK ………………………………….…......

DATA KEMAMPUAN USAHA PENUNJANG MIGAS ………….………………........................

1

3

5

11

13

21

27

39

61

iv

1

2

1. Alphacon Valfi ndo, PT................................................................................................... 612. Bukaka Teknik Utama, PT ............................................................................................. 643. Cladtek BI Metal, PT ..................................................................................................... 674. FMC Santana Petroluem Equipment Indonesia, PT .................................................... 685. Hempel Indonesia, PT .................................................................................................. 716. Karya Deli Steelindo, PT ............................................................................................... 737. KHI Pipe Industries, PT ................................................................................................. 758. M-I Production Chemicals Indonesia, PT .................................................................... 779. Pertamina (Persero) , PT .............................................................................................. 7910. Prowell Energy Service, PT .......................................................................................... 8011. Sarana Adikarya Utama, PT ........................................................................................ 8212. Southern Tristar, PT ...................................................................................................... 8413. Steel Pipe Of Industri Indonesia, PT ............................................................................ 8814. Swarna Baja Pacifi c, PT ................................................................................................ 9015. Tesso Tetra Chemika, PT .............................................................................................. 9116. Torishima Guna Indonesia, PT ..................................................................................... 9317. TPCO Pan Asia, PT ........................................................................................................ 9418. Trafoindo Prima Perkasa, PT ........................................................................................ 9619. Trimulya Gemilang, PT .................................................................................................. 98

NAMA PERUSAHAAN

2

3

4

PERUSAHAAN RATING 2

Hempel Indonesia, PT ..................................... 2Karya Deli Steelindo, PT .................................. 2M-I Production Chemicals Indonesia, PT ....... 2Tesso Tetra Chemika, PT ................................ 2Trimulya Gemilang, PT .................................... 2

PERUSAHAAN RATING 3

Alphacon Valfi ndo, PT ..................................... 3Bukaka Teknik Utama, PT ............................... 3Cladtek BI Metal, PT ........................................ 3FMC Santana Petroluem Equipment Indonesia, PT .................................................. 3KHI Pipe Industries, PT ................................... 3Pertamina (Persero) , PT ................................ 3Prowell Energy Service, PT ............................. 3Sarana Adikarya Utama, PT ............................3Southern Tristar, PT ......................................... 3Steel Pipe Of Industri Indonesia, PT ............... 3Swarna Baja Pacifi c, PT .................................. 3Torishima Guna Indonesia, PT ........................ 3TPCO Pan Asia, PT .......................................... 3Trafoindo Prima Perkasa, PT .......................... 3

PERINGKAT PERUSAHAAN PENUNJANG MIGAS

4

PERUSAHAAN RATING 2

PERUSAHAAN RATING 3

5

6

BOLTS & NUTS

Double Ended Studs Southern Tristar, PT ....................................... 84

Heavy Hex Nut Southern Tristar, PT ....................................... 84 Studbolts and Nuts Southern Tristar, PT ....................................... 84

CABLE

Cable Trunking System Southern Tristar, PT ....................................... 84 Metal Framing System Southern Tristar, PT ....................................... 84 Metallic Cable Leader Southern Tristar, PT ....................................... 84 Metallic Cable Tray Southern Tristar, PT ....................................... 84

CASING, TUBING & ACCESSORIES

Casing TPCO Pan Asia, PT ........................................ 94

Tubing TPCO Pan Asia, PT ........................................ 94

Accessories TPCO Pan Asia, PT ........................................ 94

CATHODIC PROTECTION

Aluminium Alloy Anodes Southern Tristar, PT ....................................... 84 Aluminium Sacrifi cial Anode Trimulya Gemilang, PT .................................. 98 Anode Clamp Trimulya Gemilang, PT .................................. 98 Magnesium Alloy Anodes Southern Tristar, PT ....................................... 84 Zinc Alloy Anodes Southern Tristar, PT ....................................... 84 Zinc Sacrifi cial Anode Trimulya Gemilang, PT .................................. 98

KIMAP

CHEMICALS Base Oil ”SMOOTH FLUID SF-05” Pertamina (Persero) , PT .............................. 79

Defoamer Tesso Tetra Chemika, PT .............................. 91 Drilling starch, fermentation resistance Tesso Tetra Chemika, PT .............................. 91

Fluid loss reducer Tesso Tetra Chemika, PT .............................. 91 High temperature fl uid loss additive Tesso Tetra Chemika, PT .............................. 91 HT Filtrate reducer Tesso Tetra Chemika, PT .............................. 91 HTHP Filtration control agent Tesso Tetra Chemika, PT .............................. 91

Oil mud conditioner/thinnerTesso Tetra Chemika, PT .............................. 91

Shale stabilizer Tesso Tetra Chemika, PT .............................. 91 Shale stabilizer, Fluid loss control Tesso Tetra Chemika, PT .............................. 91 Solvent Based-Corrosion Inhibitor M-I Production Chemicals Indonesia, PT ..... 77 Solvent Based-Demulsifi er M-I Production Chemicals Indonesia, PT ..... 77

Solvent Based-paraffi n Solvent M-I Production Chemicals Indonesia, PT ..... 77 Solvent Based-Pour Point Depresant M-I Production Chemicals Indonesia, PT ..... 77 Solvent Based-Reverse Demulsifi er M-I Production Chemicals Indonesia, PT ..... 77

Water Based Reverse Demulsifi er M-I Production Chemicals Indonesia, PT ..... 77 Water Based-Biocide M-I Production Chemicals Indonesia, PT ..... 77

Water Based-Cleaner M-I Production Chemicals Indonesia, PT ..... 77

6

BOLTS & NUT

CABLE


CATHODIC PROTECTION

CHEMICAL

7

Water Based-Corrosion Inhibitor M-I Production Chemicals Indonesia, PT ..... 77 Water Based-Defoamer M-I Production Chemicals Indonesia, PT ..... 77 Water Based-H2S Scavenger M-I Production Chemicals Indonesia, PT ..... 77 Water Based-Scale Inhibitor M-I Production Chemicals Indonesia, PT ..... 77

MACHINERY ACCESSORIES & INSTRUMENT

Bearing Housing Karya Deli Steelindo, PT ................................ 73 Bushing Karya Deli Steelindo, PT ................................ 73 Flanges Karya Deli Steelindo, PT ................................ 73 Flexible Shaft Coupling Karya Deli Steelindo, PT ................................ 73 Impellers Karya Deli Steelindo, PT ................................ 73 Link Chain Karya Deli Steelindo, PT ................................ 73 Propeller Karya Deli Steelindo, PT ................................ 73

Sprocket Karya Deli Steelindo, PT ................................ 73 Tractor Shoe Karya Deli Steelindo, PT ................................ 73

PAINTS Acrylic Hempel Indonesia, PT ................................... 71 Alkyds Hempel Indonesia, PT ................................... 71

Epoxies Hempel Indonesia, PT ................................... 71

Fouling Control Hempel Indonesia, PT ................................... 71

KIMAP

Miscellaneous Hempel Indonesia ......................................... 71 Polysiloxane & Silicone Hempel Indonesia ......................................... 71

Zinc Silicate Hempel Indonesia, PT ................................... 71 PIPA

Bi Metal Corrosive Resistant Alloy Lined Pipe Cladtek BI Metal, PT ...................................... 67 Corrosive Resistant Alloy Pipe Cladtek BI Metal, PT ...................................... 67

External Coating Steel Pipe Of Industri Indonesia, PT ............. 88 KHI Pipe Industries, PT ................................. 75 Internal Coating Steel Pipe Of Industri Indonesia, PT ............. 88 KHI Pipe Industries, PT ................................. 75 Pipa ERW Steel Pipe Of Industri Indonesia, PT ............. 88

Pipa SpiralSwarna Baja Pacifi c, PT ................................ 90 Pipa Spiral DSAW Steel Pipe Of Industri Indonesia, PT ............. 88 Spiral DSAW & ERW Line Pipe for Oil & Gas Industries KHI Pipe Industries, PT ................................. 75 Spiral DSAW & ERW Pipe for Building Construction KHI Pipe Industries, PT ................................. 75 Spiral DSAW & ERW Pipe for pipe Pile KHI Pipe Industries, PT ................................. 75 Spiral DSAW & ERW Pipe for Water Line Pipe KHI Pipe Industries, PT ................................. 75 Weld Overlay Clad piping components (Pipe, Flange, Fitting, etc ) Cladtek BI Metal, PT ...................................... 67

7

MACHINERY ACCESSORIES & ACCESSORIES

PIPA

PAINTS

8

POMPA

Beam Balance Bukaka Teknik Utama, PT ............................. 64 Centrifugal double suction (split case) Torishima Guna Indonesia, PT ...................... 93 Centrifugal end suction Torishima Guna Indonesia, PT ...................... 93 Centrifugal multi stage Torishima Guna Indonesia, PT ...................... 93

Centrifugal Water Pump Karya Deli Steelindo, PT ................................ 73 Conventional Sarana Adikarya Utama, PT ......................... 82 Bukaka Teknik Utama, PT ............................. 64 Hydrostatic Pumping Unit Prowell Energy Service, PT ........................... 80

Mark two Model Bukaka Teknik Utama, PT ............................. 64 Mixed Flow vertical turbine Torishima Guna Indonesia, PT ...................... 93

TANK

Active Tank (Mud Tank) Bukaka Teknik Utama, PT ............................. 64 Degasser (Mud Gas Separator) Bukaka Teknik Utama, PT ............................. 64

Desilter Tank (Mud Tank) Bukaka Teknik Utama, PT ............................. 64 Mixing Tank (Mud Tank) Bukaka Teknik Utama, PT ............................. 64 Shaker Tank (Mud Tank) Bukaka Teknik Utama, PT ............................. 64 Slugging Pit (Mud Tank) Bukaka Teknik Utama, PT ............................. 64 Trip Tank (Mud Tank) Bukaka Teknik Utama, PT ............................. 64

KIMAP

TRANFORMATOR Transformator Instrumen Arus (Current Transformer/CT) Trafoindo Prima Perkasa, PT ........................ 96

Tranformator Tenaga dan Distribusi (Distribution & Power Transformer) jenis kering (dry type) Trafoindo Prima Perkasa, PT ........................ 96 Tranformator Tenaga dan Distribusi (Distribution & Power Transformer) jenis minyak (oil immerssed) Trafoindo Prima Perkasa, PT ........................ 96

Transformator Instrumen Tegangan (Voltage Transformer/VT) Trafoindo Prima Perkasa, PT ........................ 96

VALVE

Ball Valve Alphacon Valfi ndo, PT ................................... 61 Gate Valve Alphacon Valfi ndo, PT ................................... 61 Globe Valve Alphacon Valfi ndo, PT ................................... 61

Plug Valve Alphacon Valfi ndo, PT ................................... 61 Swing Check Valve Alphacon Valfi ndo, PT ................................... 61 Water Check Valve Alphacon Valfi ndo, PT ................................... 61

WIRELINE TOOL BOX

Tool Box Prowell Energy Service, PT ........................... 80

WIRELINE UNIT COMPLETE WITH POWER PACK

Cabin Mounted Prowell Energy Service, PT ........................... 80 Logging Truck Prowell Energy Service, PT ........................... 80

8

POMPA TRANSFORMATOR

TANK

VALVE

WIRELINE TOOL BOX

WIRELINE UNIT COMPLETE WITH POWER PACK

9

Skid Mounted Prowell Energy Service, PT ........................... 80 Trailer Mounted Prowell Energy Service, PT ........................... 80

WELLHEAD & X-MAS TREE Block Valve FMC Santana Petroluem Equipment Indonesia, PT ................................................ 68

Block X-Mas Tree FMC Santana Petroluem Equipment Indonesia, PT ................................................ 68

Casing Hanger FMC Santana Petroluem Equipment Indonesia, PT ................................................ 68

Choke Assembly (Adjustable and Possitive Choke FMC Santana Petroluem Equipment Indonesia, PT ................................................ 68

Conductor Sharing Wellhead SystemFMC Santana Petroluem Equipment Indonesia, PT ................................................ 68

Flange and Clamp Connection FMC Santana Petroluem Equipment Indonesia, PT ................................................ 68

Manual and Actuator Operated FMC Santana Petroluem Equipment Indonesia, PT ................................................ 68

Slip on Lock Bottom X Clamp Hup Top Connection FMC Santana Petroluem Equipment Indonesia, PT ................................................ 68

Slip on Lock Bottom X Flange Top Connection FMC Santana Petroluem Equipment Indonesia, PT ................................................ 68

Slip on Weld Bottom X Clamp Hub Top Connection FMC Santana Petroluem Equipment Indonesia, PT ................................................ 68

Slip on Weld Bottom X Flange Top Connection FMC Santana Petroluem Equipment Indonesia, PT ................................................ 68

KIMAP

Speed Loc II Clamp FMC Santana Petroluem Equipment Indonesia, PT ................................................ 68

Threaded Bottom X Clamp Hup Top Connection FMC Santana Petroluem Equipment Indonesia, PT ................................................ 68

Threaded Bottom X Flange Top Connection FMC Santana Petroluem Equipment Indonesia, PT ................................................ 68

Tubing Hanger FMC Santana Petroluem Equipment Indonesia, PT ................................................ 68

Unihead System FMC Santana Petroluem Equipment Indonesia, PT ................................................ 68

Annulus Packoff FMC Santana Petroluem Equipment Indonesia, PT ................................................ 68

Drilling Spool FMC Santana Petroluem Equipment Indonesia, PT ................................................ 68

Guidance Equipment FMC Santana Petroluem Equipment Indonesia, PT ................................................ 68

Landing Sub Assembly FMC Santana Petroluem Equipment Indonesia, PT ................................................ 68

MLS Casing Hanger FMC Santana Petroluem Equipment Indonesia, PT ................................................ 68

Running and Retrieving Tool FMC Santana Petroluem Equipment Indonesia, PT ................................................ 68

Subsea Casing Hanger FMC Santana Petroluem Equipment Indonesia, PT ................................................ 68

Subsea Running Tool FMC Santana Petroluem Equipment Indonesia, PT ................................................ 68

9

WELLHEAD & X-MAS TREE

10

Subsea Wear BushingFMC Santana Petroluem Equipment Indonesia, PT ................................................ 68

Subsea Wellhead FMC Santana Petroluem Equipment Indonesia, PT ................................................ 68

Temporary Abandonment Cap FMC Santana Petroluem Equipment Indonesia, PT ................................................ 68

Temporary Abandonment Cap FMC Santana Petroluem Equipment Indonesia, PT ................................................ 68

Tieback Sub Assembly FMC Santana Petroluem Equipment Indonesia, PT ................................................ 68

Adjustable/Positive Choke Sarana Adikarya Utama, PT ......................... 82

ANSI Flange and System Sarana Adikarya Utama, PT ......................... 82

API Gate Valve Oil & Gas Sarana Adikarya Utama, PT ......................... 82

Blow Out Preventer RAM & Anullar Sarana Adikarya Utama, PT .......................... 82

Casing Conductor & Accessories Group 1,2,3,4 Sarana Adikarya Utama, PT ......................... 82

Casing Head Sarana Adikarya Utama, PT ......................... 82

Casing Spool Sarana Adikarya Utama, PT ......................... 82

Companion Flange Sarana Adikarya Utama, PT ......................... 82

Expansion Spool Sarana Adikarya Utama, PT ......................... 82

Geothermal Casing Head Sarana Adikarya Utama, PT ......................... 82

Geothermal Valve Sarana Adikarya Utama, PT ......................... 82

KIMAP

Nipple, Elbow & Bull Plug Sarana Adikarya Utama, PT ......................... 82

Rotary Drill Stem Elements Sarana Adikarya Utama, PT ......................... 82

Solid Block X-mas TreeSarana Adikarya Utama, PT ......................... 82

Tubing SpoolSarana Adikarya Utama, PT ......................... 82

Unitized Wellhead Sarana Adikarya Utama, PT ......................... 82

Weld neck Flange Sarana Adikarya Utama, PT ......................... 82

X-Mas Tree Sarana Adikarya Utama, PT ......................... 82

10


11

12

13

13

DAFTAR BARANG DIWAJIBKAN

14

DAFTAR BARANG DIWAJIBKAN TERDIRI DARI :

1. Chemical 2. Electrical 3. Pipa 4. Pompa 5. Valve 6. Wellhead & X-Mas Tree

14

15

15

CHEMICAL

NO KIMAPProduk

Hasil Produk Jenis Produk Spesifikasi Standar

1

J-89 Chemicals

Base Oil ”SMOOTH FLUID SF-05”

Aniline Point (ºC) : 80 Min ASTM D 611Aromatic (%Mass) : 0.05 Max UV Spectro

Color ASTM : 1.5 Max ASTM D 1500

Copper Strip : No. 1 Max ASTM D 130

Density @ 60ºF (Kg/Lt) : 0.800 – 0.835 ASTM D 1298

Distillation Range (ºC) - IBP :175 Min

ASTM D 86Flash Point PMCC (ºC) : 75 Min ASTM D 93Pour Point (ºC) : 5 Max ASTM D 97

Sulfur (ppm) : 40 Max ASTM D 2622

Viscosity at 40ºC (cSt) : 2.5 – 3.5 ASTM D 445

2Drilling starch, fermentation resistance

• Appearance : Bubuk (Powder)• Warna : Putih – kecoklatan• pH 2 % larutan : 6.0 – 8.0• Bulk dens., gr/cm3 : 0.

-

3 Fluid loss reducer

• Appearance : Bubuk (Powder) • Warna : Coklat tua - hitam• pH 2 % larutan : 7.0 – 9.0• Bulk dens., gr/cm3 : 0.60 – 0

-

4 High temperature f luid loss additive

• Appearance : Bubuk (Powder)• Warna : Putih Kekuningan• pH 2 % larutan : 7.0 – 9.5• Bulk dens, gr/cm3 :

-

5 HT Filtrate reducer

• Appearance : Bubuk (Powder)• Warna : Coklat tua – hitam• pH 2 % larutan : 3.0 – 7.0• Bulk dens., gr/cm3 : 0.60 – 0.

-

6 HTHP Filtration control agent

• Appearance : Bubuk (Powder)• Warna : Coklat tua – hitam• pH 2 % larutan : 3.0 – 7.0• Bulk dens., gr/cm3 : 0.60 – 0.8

-

7 Shale stabilizer, Fluid loss control

• Appearance : Bubuk (Powder)• Warna : Coklat tua - hitam• pH 2 % larutan : 7.0 – 9.0• Bulk dens., gr/cm3 : 0.60 – 0

-

16

ELECTRICAL

16

NO KIMAPProduk


1

F-65 Transformator

Transformator Instrumen Arus (Current Transformer/CT) Max : 1.000 A IEC 44-1, SPLN

76

2Tranformator Tenaga dan Distribusi (Distribution & Power Transformer) jenis kering (dry type)

25 KvA s/d 2.500 KvA Max : 24 kV

IEC 726, NEMA ST 20

3Tranformator Tenaga dan Distribusi (Distribution & Power Transformer) jenis minyak (oil immerssed)


IEC 76, SPLN 50, ANSI-C 571200,

NEMA ST 20

4 Transformator Instrumen Tegangan (Voltage Transformer/VT) Max : 24 KV IEC 44-2

17

17

PIPA

NO KIMAPProduk


1

G-74 Pipa

Pipa ERW

Lipe Pipe Minyak dan Gas Grade : B, X42, X52 (API 5 L)Diameter : 3 – 8 InchPanjang : 6 – 12 mKetebalan : 5,49 – 8,18 mmGrade : B, X42, X52 (API 5 L)

API 5 L, SNI, ASTM A 252, ASTM A 53

2

Pipe Pile Untuk pancangDiameter : 1/2 – 8 InchPanjang : 6 – 12 mKetebalan : 2,65 – 8,18 mm


3

Untuk saluran air (black steel & galvanized) Diameter : 1/2 – 8 InchPanjang : 6 – 12 mKetebalan : 2,65 – 8,18 mm


4 Pipa Spiral DSAW

Pipe Line Minyak dan Gas Bumi Grade : B ,X42, X52, X65Diameter : 8 – 80 InchKetebalan : 6,35 – 25,4 mmPanjang : 6 – 12 m Grade : B ,X42, X52, X65

ASTM A 252, BS 4360,

AWW C200BS 4360

AWW C200

5 Spiral DSAW & ERW Line Pipe for Oil & Gas Industries

Grade B, X42, X46, X52, X56, X60, X65, X70

Size as Specify in API Spec. 5L or Customer Spec

API Spec 5L, SNI

6 Spiral DSAW & ERW Pipe for Building Construction

Grade 2,3Size as Specify in ASTM A-252 BS Spec. or Customer Spec.

ASTM A-252, BS 4360

7 Spiral DSAW & ERW Pipe for pipe Pile

Size as Specify in ASTM A-134 BS 4360 Spec. or Customer Spec.

ASTM A-134, BS 4360

8 Spiral DSAW & ERW Pipe for Water Line Pipe

Size as Specify in AWWA C-200, ASTM A53, DIN 2460, BS 3601, BS 534 Spec. or Customer Spec.

AWWA C-200, ASTM A53, DIN 2460,

BS 3601, BS 534

18

POMPA

18

NO KIMAPProduk


1B-34

Pompa

Conventional

Model : C40 – C912 , API Torque Rating : 40.000 – 912.000 in.lbs, Polished Rod Capacity : 7.600 lbs – 36.500 lbs, Stroke Length : 42 – 168 in

API SPEC 11E

2 Conventional • C25-53-30 to C3648-470-300 API Spec 11E

3

B-30

Centrifugal double suction (split case)

Nozzle Diameter : up to 800 mm Q : up to 9,000 m3/hr H : up to 220 m. JIS/ANSI/API

4 Centrifugal end suction Nozzle Diameter : up to 400 mm Q : up to 2,000 m3/hr H : up to 300 m. JIS/ANSI/API

5 Centrifugal multi stage Nozzle Diameter : up to 300 mm Q : up to 1,500 m3/hr H : up to 2000 m. JIS/ANSI/API

19

19

VALVE

NO KIMAPProduk


1

G-75 Valve

Ball Valve

Carbon Steel Rating : 150-600 Max size : 24”

API 6D, ANSI B 16.34, ANSI B 16.5,ANSI B16.10, ANSI B16.11, ANSI B1.20.1, ANSI B31.3API 594,

2 Carbon Steel Rating : 900 Max size : 16”


4

Globe Valve



6 Carbon Steel Rating 1500 Max size : 16”

7

Swing Check Valve




10

Gate Valve




13 Water Check Valve Carbon Steel Rating : 150-600 Max size 36”

14 Plug Valve Carbon Steel Rating : 150-600 Max size 12”

20

20


NO KIMAPProduk


1

A-09 Wellhead & X-Mas Tree

- Block Valve • Size: 2 1/16” to 7 1/16”Pressure: 2.000 to 15.000 PSI API Spec 6A

2 - Unihead System • Size: 9” – 13 5/8”• Pressure: 5.000 to 10.000 PSI API Spec. 6A

3 ANSI Flange and System • SIZE- NOM 1/2" to 24"• Class 150 PSI to 500 PSI API Spec 6A

4 Casing Head • SIZE-4.1/16" to 21.1/4"• Pressure Rating-2000 psi to 10000 psi API Spec 6A

5 Casing Spool SIZE-4.1/16" to 21.1/4"• Pressure Rating-2000 psi to 15000 psi API Spec 6A

6 Companion Flange • SIZE- 2" to 20"• Pressure Rating-2000 psi to 5000 psi API Spec 6A

7 Expansion Spool • SIZE-7.1/16" to 21.1/4"• Pressure Rating-2000 psi to 5000 psi API Spec 6A

8 Geothermal Casing Head • SIZE-4.1/16" to 21.1/4“• Pressure Rating-2000 psi to 5000 psi API Spec 6A

9 Nipple, Elbow & Bull Plug • SIZE-2" to 4.1/2"• Pressure Rating-2000 psi to 5000 psi API Spec 6A

10 Tubing Spool• SIZE-4.1/16" to 13.5/8”• Pressure Rating-2000 psi to 15000 psi• PSL 1-4

API Spec 6A

11 Unitized Wellhead • SIZE-7.1/16" to 21.1/4"• Pressure Rating-2000 psi to 15000 psi API Spec 6A

12 Weld neck Flange • SIZE- 2" to 20"• Pressure Rating-2000 psi to 5000 psi API Spec 6A

21

DAFTAR BARANGDIMAKSIMALKAN

21

22

DAFTAR BARANG DIMAKSIMALKAN TERDIRI DARI :

1. Chemical2. Casing, Tubing & Accesories3. Pipa4. Pompa5. Weelhead

22

23

CHEMICAL

23


PIPA

NO KIMAPProduk

Hasil Produk Jeis Produk Spesifikasi Standar

1

J-89 Chemicals

Defoamer

• Appearance : Bubuk (Powder)• Warna : Coklat tua - Hitam• pH 2% larutan : 9.5 – 11.5• Bulk dens, gr/cm3 : 0.65 – 0

-

Shale stabilizer

• Appearance : Bubuk (Powder)• Warna : Putih – Kekuningan• pH 2 % larutan : 6.5 – 8.5• Bulk dens., gr/cm3 : 0.60

-2

NO KIMAPProduk


1

A-04

Carbon Steel Casing

Heat Treatment API Connection 4 1/2” – 13 3/8”M65, L80, C95, T95.1, P110, N80Q API 5CT

2 Heat Treatment PremiumConnection

4 1/2” - 13 3/8”M65, L80, C95, T95.1, P110, N80Q API 5CT

3

Carbon Steel Tubing

Heat Treatment API Connection

2 3/8” - 13 3/8” M65, L80, C95, T95.1, P110, N80Q API 5CT

4 Heat Treatment Premium Connection

2 3/8” - 13 3/8” M65, L80, C95, T95.1, P110, N80Q API 5CT

NO KIMAPProduk


1 G-74 Pipa Pipa Spiral

Pipe Pile untuk pancang- Diameter : 8 - 120 Inch- Panjang : 6 - 45 m- Ketebalan : 6 - 20 mm

SNI, ASTM A 252, JIS A 5525

24


POMPA

NO KIMAPProduk


1


Adjustable/Positive Choke

• SIZE-2" to 4.1/16"• Pressure Rating-2000 psi to 10000 psi API Spec 6A

2 API Gate Valve Oil & Gas

• SIZE-2.1/16" to 5.1/8"• Pressure Rating-2000 psi to 10000 psi API Spec 6A

3 Geothermal Valve • SIZE-2" to 20"• Pressure Rating-300 psi to 5000 psi API Spec 6A

4 Solid Block X-mas Tree


5

X-mas Tree


6 • SIZE-7.1/16" to 16"• Pressure Rating-2000 psi to 5000 psi API Spec 6A

NO KIMAPProduk


1

B-26 Pompa

Beam Balance

Model : B25 – B57, API Torque Rating : 25.000 – 57.000 in.lbs, Polished Rod Capacity : 5.300 lbs – 7.600 lbs, Stroke Length : 30 – 54 in

API SPEC 11E

2 Mark two Model

Model : M114 – M1280, API Torque Rating : 114.000 – 1.280.000 in.lbs, Polished Rod Capacity : 14.300 lbs – 42.700 lbs, Stroke Length : 64 – 216 in

API SPEC 11E

24

25

25

NO KIMAP

Produk


1

G-75 Valve

Ball Valve

Stainlees Steel Rating : 150-600 Max size : 24”

API 6D, ANSI B 16.34, ANSI B 16.5,ANSI B16.10, ANSI B16.11, ANSI B1.20.1, ANSI B31.3API 594

2 Alloy Steel Rating : Rating : 900 Max size : 16”

3 Stainles Steel Rating : 900 Max size : 16”

4 Alloy Steel Rating : 1500 Max size : 16”

5 Stainlees Steel Rating 1500 Max size : 16”

6

Globe Valve

Stainlees Steel Rating 150-600 Max size : 20”

7 Alloy Steel Rating 900 Max size : 16”

8 Stainles Steel Rating 900 Max size : 16”


10

Swing Check Valve





14

Gate Valve





18 Water Check Valve

Stainlees Steel Rating : 150-600 Max size 36”

19Plug Valve Stainles Steel

Rating : 150-600 Max size 12”

VALVE

26

26

27

27

DAFTAR BARANGDI BERDAYAKAN

28

DAFTAR BARANG DIBERDAYAKANTERDIRI DARI :

1. Bolt & Nut2. Casing, Tubing & Accessories3. Cathodic Protection4. Chemical5. Electrical6. Machinery Accessories7. Paints8. Pipa9. Pompa10. Tank 11. Wellhead & X-Mas Tree

28

29

BOLT & NUT

NO KIMAPProduk


1

H-80 Bolts & Nuts

Double Ended Studs

Diameter : ½ s.d 4 inch Material : Carbon Steel, Stainless Steel, Alloy Steel Grade : B7, B7M, L7, L7M B16, B8, B8M, 8T Lapisan : - Cadmium plated, Zinc

plated, Fluorocarbon coated

ASTM A193, ASTM A194

2 Heavy Hex Nut

Diameter : ½ s.d 4 inch Material : Carbon Steel, Stainless Steel, Alloy Steel Grade : 2H, 2HM, 7, 7M, 4, 4M, 8, 8M Lapisan : - Cadmium plated, Zinc plated,

Fluorocarbon coated

ASTM A194

3 Studbolts and Nuts

Diameter : ½ s.d 4 inch Material : Carbon Steel, Stainless Steel,

Alloy Steel Grade : B7, B7M, L7, L7M B16, B8, B8M, 8T

Lapisan : - Cadmium plated, Zinc plated, Fluorocarbon coated

ASTM A193, ASTM A194

NO KIMAPProduk


1

A-04

Carbon Steel Casing

Non Heat Treatment API Connection 4 1/2” - 13 3/8” H40, J55,K55,N80 API 5CT

2 Non Heat Treatment Premium Connection 4 1/2” - 13 3/8” H40, J55,K55,N80 API 5CT

6Carbon Steel

Tubing

Non Heat Treatment API Connection 2 3/8” - 4 1/2” H40, J55,K55,N80 API 5CT

7 Non Heat Treatment Premium Connection 2 3/8” - 4 1/2” H40, J55,K55,N80 API 5CT

Casing & Tubing Accessories

Coupling 2 3/8” - 13 3/8” H40, J55,K55,N80 API 5CT,API 5B

Cross Over 2 3/8” - 13 3/8” H40, J55,K55,N80 API 5CT,API 5B

Pup Joint 2 3/8” - 13 3/8” H40, J55,K55,N80 API 5CT,API 5B


29

30

CATHODIC PROTECTION

NO KIMAPProduk


1

E-61 Cathodic Protection

Aluminium Alloy Anodes

• Platform,• Jetty & Wharf• Bracelet, Tank, and Hull Anodes

• DNV-RP-B401• NACE• AS 2239-1993

2 Aluminium Sacrificial Anode

• Platform and Structural Anodes• Marine Pilling Anodes• Hull Anodes –Welded• Hull Anodes – Bolted• Bracelet Anodes• Client Spec

• MIL-A-18001• DNV-RP-B401• DNV-RP-F103• ISO15589-2• NACE RP0387• NACE RP0492• NACE TM0910• BS 7361 Pt 1• NACE RP0775

3 Anode Clamp Anode Connection System -

Magnesium Alloy Anodes Type : Pipeline and Tank Bottom NACE4

5 Zinc Alloy Anodes Type : Tank and Rod MIL-18001-H

6 Zinc SacrificialAnode

• Hull Anodes –Welded• Hull Anodes – Bolted• Client Spec


30

31

CHEMICAL

31

NO KIMAPProduk


1

J-89 Chemical

Oil mud Conditioner /Thinner

• Appearance : Cairan jernih/keruh• Warna : Kuning• pH 1% larutan : 6.5 – 7.5• Density, gr/cm3 : 0.92 – 0.97• Viscosity, cP : < 300• Kelaru

-

2Solvent Based-Corrosion Inhibitor

- Specific Gravity : 0.90-1.20 g/ml- Flash Point : ≥ 145°F

ASTM B244API RP45

Solvent Based-Demulsifier


ASTM D96, D93API RP453

4Solvent Based-Paraffin Solvent

- Specific Gravity : 0.90-1.30 g/ml- Flash Point : ≥ 89.6°F


Solvent Based-Pour Point Depresant



6Solvent Based-Reverse Demulsifier

- Specific Gravity : 0.90-1,20 g/ml- Flash Point : ≥ 212°F

ASTM D96EPA418.OSAPI RP45

Water Based Reverse Demulsifier

- Specific Gravity : 0.90-1.30 g/ml- pH : 3.2-4.0

ASTM D96, D97API RP45 7

8Water Based-Biocide

- Specific Graviity : 0.90-1.20 g/ml- pH : 3.5-7.0

ASTM D1510-02a, API RP45

Water Based-Cleaner


ASTM D1287API RP459

10Water Based-Corrosion Inhibitor


ASTM B244 , D1287

API RP45

Water Based-Defoamer


ASTM D892, D1287

API RP4511

Water Based-H2S Scavenger

- Specific Gravity : 0.90-1.20 g/ml- pH : 10-11.5

ASTM D4294API RP4512

13 Water Based-Scale Inhibitor


ASTM B659API RP45

32

ELECTRICAL

32

NO KIMAPProduk


1

F-68

Cable

Cable Trunking System - NEMA

2 Metal Framing System - NEMA

3 Metallic Cable Leader - NEMA

4 Metallic Cable Tray - NEMA

5 Wireline Tool Box Tool Box Client spec.

DNV offshore Container 271, BS

EN 12.079, SNI

6

Wireline Unit Complete withPower pack

Cabin Mounted

Drum Capacity: Wire 0.092” s/d 15/32”, Wire Length 0000-25000ft, Power Pack: Engine 40Hp s/d 250Hp, Safety Device Rig Safe Zone1, Zone4


EN 12.079, SNI

7 Logging Truck



EN 12.079, SNI

8 Skid Mounted



EN 12.079, SNI

9 Trailer MountedDrum Capacity: Wire 0.092” s/d 15/32”, Wire Length 20000-25000ft, Power Pack: Engine 40Hp s/d 250Hp, Safety Device Rig Safe Zone1, Zone3


EN 12.079, SNI

33

33

MACHINERY ACCESSORIES

NO KIMAPProduk


1

D-58

Machinery Accessories &

Instrument

Propeller Ø 28” – Ø 50”Stainless Steel -

2 Bearing Housing

Ø 1 ½” – Ø 6”Cast Iron (C.I), Graded and Alloy Cast Iron Material, Cast Steel Material, and Spheroid Graphitic ( S.G) Iron Material

JIS, ASTM

3 BushingOD 188 x ID 100 x LG 407 mmOD 210x ID 150 x LG 662 mmMaterial : Stainless Steel

JIS

4 Flanges Ø 3/8” s.d Ø 15”Stainless Steel ASME

5 Flexible Shaft Coupling 90 mm s.d 630 mmMaterial : Cast Iron -

6 Impellers Ø 120 mm - Ø 1000 mmMaterial : SUS 316

API, ANSI, JIS, ASTM, BS

7 Link Chain OD 200 x ID 50 x LG 25 mmLow Alloy Steel JIS, ASTM

8 Sprocket Diamater 1200 mmMaterial Alloy Steel JIS, ASTM, ANSI, BS

9 Tractor Shoe

PC 200 : 500 mm, 600 mm, 700 mm, 800 mm, 900 mm.PC 300: 600mm, 800 mm, 900D63E : 510 mmD3C : 400 mm, 460 mm, 600 mm Material : Alloy Steel

-

34

PAINTS

34

NO KIMAPProduk


1

J-86 Cat & Thinner

AcrylicAcrylic Hempatex Enamel 56360

2 Acrylic HempatexHi build 46410 -

3

Alkyds

Alkyd Hempalin Enamel 52140 -

4 Alkyd Hempalin primer 12050 -

5 Modyfied Alkyd Hempalin primer HB 13200 -

6

Epoxies

Abrasion resistant epoxy Hempadur Multi Strenght 45751/3 -

7 Epoxy Hempadur 15570 -

8 Epoxy Hempadur Quatro 17634 -

9 Epoxy Mastic Hempadur mastic 54881/3 -

10 Epoxy Prime Hempadur 15552 -

11 Epoxy Prime Hempadur primer 15300 -

12 Epoxy Sealer/Tie Coat Hempadur 45182 -

13 Glass Flake Epoxy Hempadur Multi strength GF 35870 -

14 Pure Epoxy Tank Lining Hempadur 15400 -

15 Pure Epoxy Tank Lining Hempadur 15500 -

16 Solvent Free Epoxy Hempadur multi strength 35530 -

17 Solvent Free Epoxy Hempadur spray guard 35490 -

18 Universal Primer Hempadur 17630/3 -

19 Zinc Epoxy Hempadur Zinc 15360 -


21

Fouling Control

Fouling release Hempasil 77100 -

22 Fouling release Hempasil 77500 -

23 Self Polishing Antifouling Hempel’s Antifouling Globic Range 8190K/2K/5K/7K -

24 Self Polishing Antifouling Hempel’s Antifouling NCT Range 8190M/0N/5M/5N -

25 Self Polishing Antifouling Hempel’s Antifouling Oceanic Range 8492K/5K -

26 Self Polishing Antifouling Hempel’s Antifouling Olympic Range 86900/50 -

27 Miscellaneous Chlorinated Rubber Hempatex Hi build 46330 -

28

Polysiloxane & Silicone

Polysiloxane Hempaxane 55000 -

29 Polysiloxane Hempel’s Silicone Aluminium 56910 -

30 Silicone Hempel’s Silicone Acrylic 56940 -

31 Silicone Hempel’s Silicone Zinc 16900 -

32

Zinc Silicate

Inorganic Zinc Silicate Hempel’s galvosil 15700 -

33 Inorganic Zinc Silicate empel’s Galvosil 15780 -

34 Inorganic Zinc Silicate Hempel’s Shop primer 15890 -

35

POMPA

PIPA

NO KIMAP

Produk


1

G-74 Pipa

External Coating

• Diameter 4 – 80 Inch• 3 Layer Polyethylene• Fusion Bonded Epoxy• Coaltar Epoxy• Wrapping Tape

CAN/CSA-Z245-21-02CAN/CSA-Z245-20-02AWWA C210AWWA C214

2 Internal Coating• Diameter 4 – 80 Inch• Cement Lining• Coaltar Epoxy

AWWA C205AWWA C210

3 Bi Metal Corrosive Resistant Alloy Lined Pipe

Base Material: API 5L X52, X60 X65, X70, DNV 415, 450CRA Material: SS316L,SS 904L, Alloy 825, Alloy 625Dia : 4” – 42”

API Spec 5LC

4 Corrosive Resistant Alloy Pipe

Grade 304/304L, 316/316L, 904L, Alloy 825, Alloy 625Dia 4”-26”

API Spec 5LC

5Weld Overlay Clad piping Components (Pipe, Flange, Fitting, etc )

Overlay Material:SS316L, SS347, Alloy 200, 400, Alloy 825, Alloy 625, Duplex 2209, etc

API Spec 5LC

6 Pipa Spiral DSAW

Pipe Line dan Pipe PileUntuk pancang & saluran air Grade : 1,2,3 Diameter : 8 -120 InchKetebalan : 4 - 25.4 mmPanjang : 6 - 12 m Grade : 1,2,3

ASTM A 252, BS 4360, AWW C200BS 4360AWW C200

NO KIMAPProduk

Jenis Produk Spesifikasi Standar

1 B-26 Pompa Hydrostatic Pumping Unit

Pressure range 0-10.000 Psi, Fluid deliver 0-100 liter/menit

DNV offshore Container 271, BS EN 12.079, SNI

2

B-30

Machinery Accessories & Instrument

Centrifugal Water Pump

Size Range : Ø 4”/4” - Ø 6”/6”Heads : 49 m / 160.8 FeetCapacities: to 155 m³ / hrPower: to17 (kW)Rotation: 1200 – 2600 (rpm)Material: Cast Iron and Stainless Steel 316

ANSI

3 Pompa Mixed Flow vertical turbine

Nozzle Diameter : up to 800 mm Q : up to 6,000 m3/hr H : up to 70 m.

JIS/ANSI/API

35

36

TANK

NO KIMAP

Produk


1

E-61 Tank

Active Tank (Mud Tank) Kapasitas : 72,56 Bbls - 400 Bbls, Material : ASTM A 36 or JIS SS 400

ASME SECTION VIII DIV. 1

2 Degasser (Mud Gas Separator)

Dimensi : Diameter : 30 - 48”panjang Shell to Shell 108 – 212”Material A 516 Gr. 70


3 Desilter Tank (Mud Tank) Kapasitas : 48,37 Bbls, Material : ASTM A 36 or JIS SS 400


4 Mixing Tank (Mud Tank) Kapasitas : 66,51 Bbls, Material : ASTM A 36 or JIS SS 400


5 Shaker Tank (Mud Tank) Kapasitas : 72,56 Bbls - 400 Bbls, Material : ASTM A 36 or JIS SS 400


6 Slugging Pit (Mud Tank) Kapasitas : 55,42 Bbls, Material : ASTM A 36 or JIS SS 400


7 Trip Tank (Mud Tank) Kapasitas : 55,42 Bbls, Material : ASTM A 36 or JIS SS 400


36

NO KIMAPProduk


1

G-75 Valve

Ball Valve Alloy Steel Rating : 150-600 Max size : 24”

API 6D, ANSI B 16.34, ANSI B 16.5,ANSI B16.10, ANSI B16.11, ANSI B1.20.1, ANSI B31.3API 594

2Globe Valve

Alloy Steel Rating : 150-600 Max size : 20”


4Swing Check Valve

Alloy Steel Rating : 150-600 Max size : 24”


6Gate Valve

Alloy SteelRating : 150-600 Max size : 36”


8 Water Check Valve Alloy Steel Rating : 150-600 Max size 36”

9 Plug Valve Alloy Steel Rating : 150-600 Max size 12”

VALVE

37


NO KIMAPProduk


1

A-09 Wellhead & X- Mas Tree

Blow Out Preventer RAM & Anullar • 3.1/16” to 29.1/2” 15.000 psi API Spec 16A

2 • Subsea Casing Hanger • Size: 18 ¾” X 7” to 18 ¾” X 13 3/8” OD Casing API Spec 17D

3 • Subsea Running Tool

• Temporary Guide Base Running• Permanent Guide Base Running• 30” Manual Wellhead Running Tool• 18 ¾” Manual Wellhead Running Tool• Casing Hanger Manual Running Tool• 13 3/8” Casing Hangger Running Tool• 9 5/8” Casing Hanger Running Tool• 18 ¾” Pac

API Spec 17D

4 • Subsea Wear Bushing• 18 ¾” Housing Wear Bushing• 18 ¾” X 7” to 18 ¾” X 13 3/8” Wear Bushing

API Spec 17D

5 • Subsea Wellhead • 30” Low Pressure Wellhead• 18 ¾” High Pressure Wellhead API Spec 17D

6 - Block X-Mas Tree • Size: 2 1/16” to 7 1/16”Pressure: 2.000 to 15.000 PSI API Spec 6A

7 - Casing Hanger • Size: 11” X 7” / 5 ½” / 4 ½” / 3 ½” to 21¼” X 13 3/8”OD CSG API Spec. 6A

8 - Choke Assembly (Adjustable and Possitive Choke

• Size: 2 1/16” to 7 1/16”• Pressure: 2.000 to 15.000PSI API Spec 6A

9 - Conductor Sharing Wellhead System

• 2 in 1• 3 in 1 API Spec. 6A

10 - Flange and Clamp Connection • Size: 7 1/6” to 21 ¼” X 7 1/16” to 21 ¼” • Pressure: 2.000 to 15.000 PSI API Spec. 6A

11 - Manual and Actuator Operated • Size: 2 1/16” to 7 1/16”• Pressure: 2.000 to15.000 PSI API Spec 6A

12 - Slip on Lock Bottom X Clamp HupTop Connection

• Size: 7” to 20”• Pressure: 2.000 top 5.000 PSI API Spec. 6A

13 - Slip on Lock Bottom X Flange Top Connection

• Size: 7” to 20”• Pressure: 2.000 to 5.000 PSI API Spec. 6A

14 - Slip on Weld Bottom X Clamp Hub Top Connection


15 - Slip on Weld Bottom X Flange Top Connection


37

38


NO KIMAPProduk


16


- Speed Loc II Clamp• Size : 21 ¼”, 11”, 13 5/8”• Pressure : 3.000 PSI, 5.000 Psi, 10.000 PSI

API Spec 6A

17 - Threaded Bottom X Clamp Hup Top Connection


18 - Threaded Bottom X Flange Top Connection


19 - Tubing Hanger

• Size: Single T.H. Assy. 7 1/16” X 5 ½” / 4 ½” / 3 ½” / 2 7/8” / 2 3/8” to 13 5/8” X 7” / 5 ½” / 4 ½” / 3 ½” / 2 7/8” / 2 3/8”

• Size: Dual T.H. Assy. 7 1/16” X 2 3/8” X 2 3/8” to 13 5/8” X 5 ½” X 5 ½” / 4 ½” / 3 ½” / 2 7/8” / 2 3/8”

API Spec. 6A

20 • Annulus Packoff • 18 ¾” API Spec 17D

21 • Drilling Spool • Drilling Spool• Drilling Riser API Spec 17D

22 • Guidance Equipment • Temporary Guide Base Assembly• Permanent Guide Base Assembly API Spec 17D

23 • Landing Sub Assembly • Size: 9 5/8” to 20” Landing Sub API Spec 17D

24 • MLS Casing Hanger • Size: 13 3/8” X 9 5/8” to 30” X 20” OD Casing API Spec 17D

25 • Running and Retrieving Tool• T.A. Cap Running and Retriving Tool• 9 5/8” to 20” Washout Tool• 9 5/8” Hanger Recess Clean Out Tool

API Spec 17D

26 • Temporary AbandonmentCap • 18 ¾” API Spec 17D

27 • Temporary Abandonment Cap

• 13 3/8” to 20” Temporary Abandonment Cap API Spec 17D

28 • Tieback Sub Assembly • 9 5/8” to 20” Tieback Sub Assembly API Spec 17D

29 Casing Conductor & AccessoriesGroup 1,2,3,4 - API Spec 5CT

30 Rotary Drill Stem Elements

• Drill Stem job• Drill Collar• Threading for Rotary Shouldered Connection

API Spec 6A

38

39

40

DAFTAR PERUSAHAAN BERDASARKAN JENIS PRODUK

1. Daftar Perusahaan - Bolt & Nut2. Daftar Perusahaan - Cathodic Protection3. Daftar Perusahaan - Casing, Tubing & Accessories4. Daftar Perusahaan - Chemical5. Daftar Perusahaan - Electrical6. Daftar Perusahaan - Machinery Accessories7. Daftar Perusahaan - Paints8. Daftar Perusahaan - Pipa9. Daftar Perusahaan - Pompa10. Daftar Perusahaan - Tank11. Daftar Perusahaan - Valve 12. Daftar Perusahaan - Wellhead & X-Mas Tree

40

41

DAFTAR PERUSAHAAN BOLT & NUT

NO KIMAPProduk

Nama Perusahaan Rating TKDN BMP Kapasitas


1

H-80 Bolts & Nuts

Double Ended Studs


Alloy Steel Grade : B7, B7M, L7, L7M B16, B8,

B8M, 8T Lapisan : - Cadmium plated, Zinc plated,

Fluorocarbon coated

ASTM A193,ASTM A194

Southern Tristar, PT 3 400

Ton/tahun

2 Heavy Hex Nut


Alloy Steel Grade : 2H, 2HM, 7, 7M, 4, 4M, 8,

8M Lapisan : - Cadmium plated, Zinc

plated, Fluorocarbon coated

ASTM A194 Southern Tristar, PT 3 400

Ton/tahun

3 Studbolts and Nuts


Alloy Steel Grade : B7, B7M, L7, L7M B16, B8,

B8M, 8T Lapisan : - Cadmium plated, Zinc plated,

Fluorocarbon coated

ASTM A193,ASTM A194


Ton/tahun

DAFTAR PERUSAHAAN CATHODIC PROTECTION

NO KIMAPProduk Nama

Perusahaan Rating TKDN BMP KapasitasHasil Produk Jenis Produk Spesifikasi Standar

1

E-61 Cathodic Protection


• Platform,• Jetty & Wharf• Bracelet, Tank, andHull Anodes

• DNV-RP-B401• NACE• AS 2239-1993


Ton/tahun

2 Aluminium Sacrificial Anode

• Platform and Structural Anodes

• Marine Pilling Anodes

• Hull Anodes –Welded• Hull Anodes – Bolted• Bracelet Anodes• Client Spec


Trimulya Gemilang, PT 2 150 Ton/Bln

3 Anode Clamp Anode Connection System



4 Magnesium Alloy Anodes

Type : Pipeline and Tank Bottom NACE Southern

Tristar, PT 3 500 Ton/tahun

5 Zinc Alloy Anodes Type : Tank and Rod MIL-18001-H Southern Tristar, PT 3 500

Ton/tahun

6 Zinc Sacrificial Anode

• Hull Anodes –Welded• Hull Anodes – Bolted• Client Spec



41

42

DATA PERUSAHAAN CASING, TUBING & ACCESSORIES

42

NO KIMAP

ProdukNama


1

A-04

Casing

Heat Treatment API Connection EUE8RD, NUE, Mod EUE, STC, LTC,BTC, API Modified

4 1/2” – 13 3/8” N80.Q, R95, M65, L80.1, L80 13CR, C90.1, C95, T95.1, C110, P110, Q125, PSL 1, 2 dan 3, TP80T, TP110T(T),TP125T(T), TP130T(T), TP90H, TP100H, TP110H, TP155P,TP80S(S), TP90S(S), TP95S(S),TP110S(S), TP110TS(S),3Cr&13Cr, TP110-3Cr, TP80-13Cr,TP110 Sup 13Cr, TP140V, TP155V

API 5CT TPCO Pan Asia, PT 3 26,2

120.000 Ton/Tahun.

Memiliki fasilitas

Heat Treatment

2

Heat Treatment Premium Connection TP-G2, TP-G3, TP-CQ(EX), TP-FJ, TP-NF, TP-JC, TP-TS, TP-QR, TP-HT, TP-LC, TP-BM, TP-PEAK

4 1/2” - 13 3/8” N80.Q, R95, M65, L80.1, L80 13CR, C90.1, C95,T95.1, C110, P110, Q125, PSL 1,2 dan 3, TP80T, TP110T(T),TP125T(T), TP130T(T), TP90H,TP100H, TP110H, TP155P,TP80S(S), TP90S(S), TP95S(S),TP110S(S), TP110TS(S),3Cr&13Cr, TP110-3Cr, TP80-13Cr, TP110 Sup 13Cr,TP140V, TP155V


120.000 Ton/Tahun.

Memiliki fasilitas

Heat Treatment

3

Non Heat Treatment API Connection EUE8RD, NUE, Mod EUE, STC, LTC,BTC, API Modified

4 1/2” - 13 3/8” H40, J55,K55,N80 API 5CT TPCO Pan Asia, PT 3 16,42 120.000

Ton/Tahun

4

Non Heat Treatment Premium Connection TP-G2, TP-G3, TP-CQ(EX), TP-FJ, TP-NF, TP-JC, TP-TS, TP-QR, TP-HT, TP-LC, TP-BM, TP-PEAK


Ton/Tahun

5

Tubing

Heat Treatnent API Connection EUE8RD, NUE,Mod EUE, STC, LTC,BTC, API Modified

2 3/8” - 4 1/2” N80.Q, R95, M65,L80.1, L80 13CR, C90.1, C95,T95.1, C110, P110, Q125, PSL 1,2 dan 3, TP80T, TP110T(T),TP125T(T), TP130T(T), TP90H,TP100H, TP110H, TP155P,TP80S(S), TP90S(S), TP95S(S),TP110S(S), TP110TS(S),3Cr&13Cr, TP110-3Cr, TP80-13Cr,TP110 Sup 13Cr, TP140V,TP155V


120.000 Ton/Tahun.

Memiliki fasilitas

Heat Treatment

6

Heat Treatment Premium Connection TP-G2, TP-G3, TP-CQ(EX), TP-FJ, TP-NF, TP-JC, TP-TS, TP-QR, TP-HT, TP-LC, TP-BM, TP-PEAK

2 3/8” - 4 1/2” TP-G2, TP-G3, TP-CQ(EX), TP-FJ, TP-NF, TP-JC,TP-TS, TP-QR, TP-HT, TP-LC,TP-BM, TP-PEAK, H40,J55,K55,N80


120.000 Ton/Tahun.

Memiliki fasilitas

Heat Treatment

7

Non Heat Treatment API Connection EUE8RD, NUE, Mod EUE, STC, LTC,BTC, API Modified


Ton/Tahun

8

Non Heat Treatment Premium Connection TP-G2, TP-G3, TP-CQ(EX), TP-FJ, TP-NF, TP-JC, TP-TS,TP-QR, TP-HT, TP-LC, TP-BM, TP-PEAK


Ton/Tahun

9

Casing & Tubing

Accessories

Coupling 2 3/8” - 13 3/8” API

5CT,API 5B

TPCO Pan Asia, PT 3

120,000Ton/Tahun

10 Cross Over 2 3/8” - 13 3/8” API

5CT,API 5B

TPCO Pan Asia, PT 3

120,000Ton/Tahun

11 Pup Joint 2 3/8” - 13 3/8” API

5CT,API 5B

TPCO Pan Asia, PT 3

120,000Ton/Tahun

43

DAFTAR PERUSAHAAN CHEMICAL

43

NO KIMAPProduk

Nama Perusahaan Rating TKDN BMP KapasitasHasil

Produk Jenis Produk Spesifikasi Standar

1

J-89 Chemical

Base OilSMOOTH FLUIDSF-05

Aniline Point (ºC) : 80 Min ASTM D 611

Pertamina (Persero) , PT 3 66,63 3,00

1.753.714 Barrels/Ye

ar

2 Aromatic (%Mass) : 0.05 Max UV Spectro

3 Color ASTM : 1.5 Max ASTM D 1500

4 Copper Strip : No. 1 Max ASTM D 130

5 Density @ 60ºF (Kg/Lt) : 0.800 – 0.835 ASTM D 1298

6 Distillation Range (ºC) - IBP :175 Min ASTM D 86

7 Flash Point PMCC (ºC) : 75 Min ASTM D 93

8 Pour Point (ºC) : 5 Max ASTM D 97

9 Sulfur (ppm) : 40 Max ASTM D 2622

10 Viscosity at 40ºC (cSt) : 2.5 – 3.5 ASTM D 445

11 Defoamer

• Appearance : Bubuk (Powder)• Warna : Coklat tua - hitam• pH 2% larutan : 9.5 – 11.5• Bulk dens, gr/cm3 : 0.65 – 0

-

Tesso Tetra Chemika, PT 2

28,62

-

500 Ton / Tahun

12Drilling starch, fermentation resistance

• Appearance : Bubuk (Powder)• Warna : Putih – kecoklatan• pH 2 % larutan : 6.0 – 8.0• Bulk dens., gr/cm3 : 0.

89,54 1500 Ton / Tahun

13 Fluid loss reducer


- 87,87 500 Ton / Tahun

44

DAFTAR PERUSAHAAN CHEMICAL

44

NO KIMAPProduk



14

J-89 Chemical

High temperature fluid loss additive

• Appearance : Bubuk (Powder)• Warna : Putih Kekuningan• pH 2 % larutan : 7.0 – 9.5• Bulk dens, gr/cm3 :

-

Tesso Tetra Chemika, PT 2

84,79 500 Ton / Tahun

15 HT Filtrate reducer

• Appearance : Bubuk (Powder)• Warna : Coklat tua – hitam• pH 2 % larutan : 3.0 – 7.0• Bulk dens., gr/cm3 : 0.60 – 0.

- 68,09 300 Ton / Tahun

16 HTHP Filtration control agent

• Appearance : Bubuk (Powder)• Warna : Coklat tua – hitam• pH 2 % larutan : 3.0 – 7.0• Bulk dens., gr/cm3 : 0.60 – 0.8

- 52,86 300 Ton / Tahun

17 Oil mud conditioner/thinner

• Appearance : Cairan jernih/keruh• Warna : Kuning• pH 1% larutan : 6.5 – 7.5• Density, gr/cm3 : 0.92 – 0.97• Viscosity, cP : < 300• Kelaru

- 9,40 1200 Ton / Tahun

18 Shale stabilizer

• Appearance : Bubuk (Powder)• Warna : Putih – kekuningan• pH 2 % larutan : 6.5 – 8.5• Bulk dens., gr/cm3 : 0.60

- 34,68 200 Ton / Tahun

19 Shale stabilizer, Fluid loss control


- 47,44 500 Ton / Tahun

20 Solvent Based-Corrosion Inhibitor

- Specific Gravity : 0.90-1.20 g/ml- Flash Point : ≥ 145�F

ASTM B244API RP45

M-I Production Chemicals

Indonesia, PT2 - - 5.760

ton/tahun

21 Solvent Based-Demulsifier


ASTM D96, D93

API RP45

22Solvent

Based-paraffin Solvent

- Specific Gravity : 0.90-1.30 g/ml- Flash Point : ≥ 89.6�F

ASTM D96, D97

API RP45

23Solvent Based-

Pour Point Depresant


ASTM D96, D97

API RP45

24Solvent Based-

Reverse Demulsifier

- Specific Gravity : 0.90-1,20 g/ml- Flash Point : ≥ 212�F

ASTM D96EPA418.OSAPI RP45

25Water Based

Reverse Demulsifier


ASTM D96, D97

API RP45

26 Water Based-Biocide

- Specific Graviity : 0.90-1.20 g/ml- pH : 3.5-7.0


27 Water Based-Cleaner


ASTM D1287

API RP45

28 Water Based-Corrosion Inhibitor


ASTM B244 , D1287

API RP45

29 Water Based-Defoamer


ASTM D892, D1287

API RP45

30 Water Based-H2S Scavenger

- Specific Gravity : 0.90-1.20 g/ml- pH : 10-11.5

ASTM D4294

API RP45

31 Water Based-Scale Inhibitor


ASTM B659API RP45

45

45

DAFTAR PERUSAHAAN ELECTRICAL

NO KIMAPProduk



1

F-65 Transformator

Transformator Instrumen Arus (Current Transformer/CT)

Max : 1.000 A IEC 44-1, SPLN 76

Trafoindo Prima Perkasa,

PT3 47,05 24.000

Unit/Tahun

2

Tranformator Tenaga dan Distribusi (Distribution & Power Transformer) jenis kering (dry type)


IEC 726, NEMA ST 20


PT3 44,64 3000

MVA/Tahun

3

Tranformator Tenaga dan Distribusi (Distribution & Power Transformer) jenis minyak (oil immerssed)


IEC 76, SPLN 50, ANSI-C

571200, NEMA ST 20


PT3 46,88 3000

MVA/Tahun

4

Transformator Instrumen Tegangan (Voltage Transformer/VT)

Max : 24 KV IEC 44-2Trafoindo

Prima Perkasa, PT

3 46,07 24.000 Unit/Tahun

5

F-68

Cable

Cable Trunking System - NEMA Southern

Tristar, PT 3 450 Ton/tahun

6 Metal Framing System - NEMA Southern Tristar, PT 3 450

Ton/tahun

7 Metallic Cable Leader - NEMA Southern Tristar, PT 3 450

Ton/tahun

8 Metallic Cable Tray - NEMA Southern Tristar, PT 3 450

Ton/tahun

9 Wireline Tool Box Tool Box Client spec.

DNV offshore Container 271, BS EN 12.079,

SNI

Prowell Energy Service, PT 3 20 unit /

tahun

10

Wireline Unit Complete with

Power pack

Cabin Mounted

Drum Capacity:Wire 0.092” s/d 15/32”, Wire Length 20000-25000ft, Power Pack: Engine 40Hp

s/d 250Hp, Safety Device Rig Safe

Zone1, Zone4


SNI

Prowell Energy Service, PT 3 8 unit / tahun

11 Logging Truck

Drum Capacity: Wire 0.092” s/d 15/32”, Wire Length 20000-

25000ft, Power Pack: Engine 40Hp s/d 250Hp, Safety Device Rig Safe

Zone1, Zone5


SNI


12 Skid Mounted

Drum Capacity: Wire 0.092” s/d 15/32”,

Wire Length 20000-25000ft, Power Pack: Engine 40Hp


Zone1, Zone2


SNI


13 Trailer Mounted

Drum Capacity: Wire 0.092” s/d 15/32”,Wire Length 20000-25000ft, Power Pack: Engine 40Hp


Zone1, Zone3


SNI


46

46

DATA PERUSAHAAN MACHINERY ACCESSORIES

NO KIMAPProduk


Hasil Produk


1

D-58

Machinery Accessories& Instrument

Propeller Ø 28” – Ø 50”Stainless Steel - Karya Deli

Steelindo, PT 2 +/- 9600 pcs / thn

2 Bearing Housing

Ø 1 ½” – Ø 6”Cast Iron (C.I), Graded and Alloy

Cast Iron Material, Cast Steel Material, and Spheroid Graphitic

(S.G) Iron Material

JIS, ASTM Karya Deli Steelindo, PT 2 +/- 3000 set /

thn

3 BushingOD 188 x ID 100 x LG 407 mmOD 210x ID 150 x LG 662 mm

Material : Stainless Steel JIS Karya Deli


4 Flanges Ø 3/8” s.d Ø 15”Stainless Steel ASME Karya Deli


5 Flexible Shaft Coupling

90 mm s.d 630 mmMaterial : Cast Iron - Karya Deli

Steelindo, PT 2 +/- 1800 set / thn

6 Impellers Ø 120 mm - Ø 1000 mmMaterial : SUS 316

API, ANSI, JIS, ASTM,

BS

Karya Deli Steelindo, PT 2 +/- 2400 pcs /

thn

7 Link Chain OD 200 x ID 50 x LG 25 mmLow Alloy Steel JIS, ASTM Karya Deli

Steelindo, PT 2 +/- 3000 meter / thn

8 Sprocket Diamater 1200 mmMaterial Alloy Steel

JIS, ASTM, ANSI, BS

Karya Deli Steelindo, PT 2 +/- 60 ton /

thn

9 Tractor Shoe

PC 200 : 500 mm, 600 mm, 700 mm, 800 mm, 900 mm.PC 300: 600mm, 800 mm,

900 mmD63E : 510 mmD3C : 400 mm, 460 mm,

600 mm Material : Alloy Steel

- Karya Deli Steelindo, PT 2 +/- 42000 set

/ thn

47

DATA PERUSAHAAN PAINTS

47

NO KIMAPProduk


ProdukJenis

Produk Spesifikasi Standar

1

J-86 Cat & Thiner

AcrylicAcrylic Hempatex Enamel 56360 -

Hempel Indonesia, PT 2 2,10

5,5 Juta Ltr/ Tahun

2 Acrylic Hempatex Hi build 46410 -

3

Alkyds

Alkyd Hempalin Enamel 52140 -

4 Alkyd Hempalin primer 12050 -

5 Modyfied Alkyd Hempalin primer HB 13200 -

6

Epoxies

Abrasion resistant epoxy Hempadur Multi Strenght 45751/3 -

7 Epoxy Hempadur 15570 -

8 Epoxy Hempadur Quatro 17634 -

9 Epoxy Mastic Hempadur mastic 54881/3 -

10 Epoxy Prime Hempadur 15552 -

11 Epoxy Prime Hempadur primer 15300 -

12 Epoxy Sealer/Tie Coat Hempadur 45182 -

13 Glass Flake Epoxy Hempadur Multi strength GF 35870 -

14 Pure Epoxy Tank LiningHempadur 15400 -

15 Pure Epoxy Tank LiningHempadur 15500 -

16 Solvent Free Epoxy Hempadurmulti strength 35530 -

17 Solvent Free Epoxy Hempadurspray guard 35490 -

18 Universal Primer Hempadur 17630/3 -



48

48

NO KIMAPProduk



21

J-86 Cat & Thiner

Fouling Control

Fouling release Hempasil 77100 -

Hempel Indonesia, PT 2 - 2,10 5,5 Juta Ltr/

Tahun

22 Fouling release Hempasil 77500 -

23Self Polishing Antifouling Hempel’s

Antifouling Globic Range 8190K/2K/5K/7K

-

24Self Polishing Antifouling Hempel’s

Antifouling NCT Range 8190M/0N/5M/5N

-

25 Self Polishing Antifouling Hempel’sAntifouling Oceanic range 8492K/5K -

26 Self Polishing Antifouling Hempel’sAntifouling Olympic range 86900/50 -

27 Miscellaneous Chlorinated Rubber Hempatex Hi build 46330 -

28


Polysiloxane Hempaxane 55000 -

29 Polysiloxane Hempel’s Silicone Aluminium 56910 -

30 Silicone Hempel’s Silicone Acrylic 56940 -

31 Polysiloxane & Silicone

Silicone Hempel’s Silicone Zinc 16900 -

32

Zinc Silicate

Inorganic Zinc Silicate Hempel’s galvosil 15700 -

33 Inorganic Zinc Silicate empel’s Galvosil 15780 -

34 Inorganic Zinc Silicate Hempel’s Shop primer 15890 -

DATA PERUSAHAAN PAINTS

49

49

DATA PERUSAHAAN PIPA

NO KIMAP

ProdukNama

Perusahaan Rating TKDN BMP KapasitasHasil


1

G-74 Pipa

Pipa Coating

External Coating

- Diameter 4 – 80 Inch- 3 Layer Polyethylene- Fusion Bonded Epoxy- Coaltar Epoxy- Wrapping Tape

Steel Pipe Of Industri

Indonesia, PT3 80.000

Ton/Tahun

2

- Bonded Asbestos Felt Wrap- Coal Tar Enamel, Fibrous- Glass Mat & Bonded Double

- Asbestos Flet Mat- Coal Tar Enamel & Bonded - Double Asbestos- Asphalt Coating, Dipping or Painting

- Polyethylene or Polyvinyl Tape Coating

- Epoxy Coating- Fusion Bounded Epoxy- Three Layer Polyethylene- Three Layer Polyprophylene

KHI Pipe Industries, PT

3

Internal Coating

- Diameter 4 – 80 Inch- Cement Lining- Coaltar Epoxy


Indonesia, PT3 80.000

Ton/Tahun

4

Centrifugally Spun Cement/Mortar Lining- Internal Paint Epoxy Coating

KHI Pipe Industries, PT

5Bi Metal Corrosive Resistant Alloy Lined Pipe

Base Material: API 5L X52, X60 X65, X70, DNV 415, 450CRA Material: SS316L,SS 904L, Alloy 825, Alloy 625 Dia : 4” – 42”

API Spec 5LC Cladtek BI Metal, PT 3 6,9 1 Km/Hari

6 Corrosive Resistant Alloy Pipe

Grade 304/304L, 316/316L, 904L, Alloy 825, Alloy 625Dia 4”-26”

API Spec 5LC Cladtek BI Metal, PT 3 15,64 0,5

Km/Hari

7

Weld Overlay Clad piping components (Pipe, Flange, Fitting, etc )

Overlay Material:SS316L, SS347, Alloy 200, 400, Alloy 825, Alloy 625, Duplex 2209, etc

API Spec 5LC Cladtek BI Metal, PT 3 13 20 M2/Hari

8 Pipa Spiral

Pipe Pile untuk pancang- Diameter : 8 - 120 Inch- Panjang : 6 - 45 m- Ketebalan : 6 - 20 mm

SNI, ASTM A 252, JIS A 5525 Swarna Baja Pacific, PT 3 32,95

120.000 Ton/Tahun

9

Pipa ERW

Lipe Pipe Minyak dan Gas Grade: B, X42, X52 (API 5 L)Diameter : 3 – 8 InchPanjang : 6 – 12 mKetebalan : 5,49 – 8,18 mmGrade : B, X42, X52 (API 5 L



Indoenesia, PT3 48,47 54.000

Ton/Tahun

10

Pipe Pile Untuk pancangDiameter : 1/2 – 8 InchPanjang : 6 – 12 mKetebalan : 2,65 – 8,18 mm




Ton/Tahun

11

Untuk saluran air (black steel & galvanized) Diameter : 1/2 – 8 InchPanjang : 6 – 12 mKetebalan : 2,65 – 8,18 mm




Ton/Tahun

50

DATA PERUSAHAAN PIPA

50

NO KIMAP

ProdukNama



12

G-74 Pipa

Pipa Spiral DSAW

Pipe Line Minyak dan Gas Bumi Grade : B ,X42, X52, X65Diameter : 8 – 80 InchKetebalan : 6,35 – 25,4 mmPanjang : 6 – 12 m Grade : B ,X42, X52, X65

ASTM A 252, BS 4360, AWW C200

BS 4360AWW C200



Ton/Tahun

13 Pipa Spiral DSAW

Pipe Line dan Pipe Pile Untuk pancang & saluran air Grade : 1,2,3 Diameter : 8 -120 InchKetebalan : 4 - 25.4 mmPanjang : 6 - 12 m Grade : 1,2,3

ASTM A 252, BS 4360, AWW C200

BS 4360AWW C200


Indoenesia, PT3 120.000

Ton/Tahun

14Spiral DSAW & ERW Line Pipe for Oil &Gas Industries

Grade B, X42, X46, X52, X56, X60, X65, X70

Size as Specify in API Spec. 5L or Customer Spec

API Spec 5L, SNI KHI Pipe Industries, PT 3 48,67 200.000

Ton/Tahun

15Spiral DSAW & ERWPipe for BuildingConstruction

Grade 2,3Size as Specify in ASTM A-252 BS Spec. or Customer Spec.

ASTM A-252, BS 4360 KHI Pipe Industries, PT 3 48,37 200.000

Ton/Tahun

16 Spiral DSAW & ERW Pipe for pipe Pile


ASTM A-134, BS 4360 KHI Pipe Industries, PT 3 48,82 200.000

Ton/Tahun

17Spiral DSAW & ERW Pipe for Water Line Pipe


AWWA C-200, ASTM A53, DIN 2460, BS 3601, BS 534

KHI Pipe Industries, PT 3 48,51 200.000

Ton/Tahun

51

DATA PERUSAHAAN POMPA

51

NO KIMAP

ProdukNama



1

B-26

Pompa

Beam Balance

Model : B25 – B57, API TorqueRating : 25.000 – 57.000 in.lbs, Polished Rod Capacity : 5.300 lbs –

7.600 lbs, Stroke Length : 30 – 54"

API SPEC 11E Bukaka Teknik Utama, PT 3 29,74

720 Unit/Tahun

2 Mark two Model

Model : M114 – M1280, API Torque Rating : 114.000 – 1.280.000” lbs, Polished Rod Capacity :

14.300 lbs – 42.700 lbs,Stroke Length : 64 – 216 i"


720 Unit/Tahun

3Hydrostatic

PumpingUnit

Pressure range 0-10.000 Psi, Fluid deliver 0-100 liter/menit


SNI

Prowell Energy Service, PT 3 5 unit /

tahun

4

B-30


Size Range : Ø 4”/4” - Ø 6”/6”Heads : 49 m / 160.8 FeetCapacities: to 155 m³ / hrPower: to17 (kW)Rotation: 1200 – 2600 (rpm)Material: Cast Iron and Stainless

Steel 316

ANSI Karya Deli Steelindo, PT 2 +/- 1200

unit / thn

5 Centrifugal double suction (split case)

Nozzle Diameter : up to 800 mm Q: up to 9,000 m3/hr H : up to 220 m. JIS/ANSI/API

Torishima Guna

Indonesia, PT3 74,61

100 Unit/tahun

6 Centrifugal end suction

Nozzle Diameter : up to 400 mm Q:up to 2,000 m3/hr H : up to 300 m. JIS/ANSI/API

Torishima Guna


4000 Unit/tahun

7 Centrifugal multi stage

Nozzle Diameter : up to 300 mm Q: up to 1,500 m3/hr H : up to 2000 m. JIS/ANSI/API

Torishima Guna


300 Unit/tahun

8 Mixed Flow vertical turbine

Nozzle Diameter : up to 800 mm Q:up to 6,000 m3/hr H : up to 70 m. JIS/ANSI/API

Torishima Guna

Indonesia, PT3 100

Unit/tahun

9

B-34

Conventional • C25-53-30 to C3648-470-300 API Spec 11ESarana

Adikarya Utama, PT

3 54,26 1000 Unit /th

10 Conventional

Model : C40 – C912 , API Torque Rating : 40.000 – 912.000 in.lbs, Polished Rod Capacity :

7.600 lbs – 36.500 lbs, Stroke Length : 42 – 168 "


720 Unit/Tahun

52

DATA PERUSAHAAN TANK

NO KIMAPProduk



1

E-61 Tank

Active Tank

Kapasitas : 72,56 Bbls - 400 Bbls, Material : ASTM A 36 or JIS SS 400


Bukaka Teknik Utama, PT 3 24

Unit/Tahun

2 DegasserDimensi : Diameter : 30 - 48”Panjang Shell to Shell 108 –212”Material A 516 Gr. 70



Unit/Tahun

3 Desilter TankKapasitas : 48,37 Bbls, Material : ASTM A 36 or

JIS SS 400



Unit/Tahun

4 Mixing TankKapasitas : 66,51 Bbls, Material : ASTM A 36 or JIS SS 400



Unit/Tahun

5 Shaker TankKapasitas : 72,56 Bbls – 400 bls, Material : ASTM A 36 or JIS SS 400



Unit/Tahun

6 Slugging PitKapasitas : 55,42 Bbls, Material : ASTM A 36 or JIS SS 400



Unit/Tahun

7 Trip TankKapasitas : 55,42 Bbls, Material : ASTM A 36 or JIS SS 400



Unit/Tahun

NO KIMAPProduk Nama



1

G-75 Valve

Ball Valve


API 6D, ANSI B 16.34, ANSI B 16.5,ANSI B16.10, ANSI B16.11, ANSI B1.20.1,ANSI B31.3API 594,

Alphacon Valfindo, PT 3 49,67

2112 pcs/thn 2 Alloy Steel

Rating : 150-600 Max size : 24”Alphacon

Valfindo, PT 3 15,73

3 Stainlees Steel Rating : 150-600 Max size : 24”




2640 pcs/thn

5 Alloy Steel Rating : Rating : 900 Max size : 16”


6 Stainles Steel Rating : Rating 900 Max size : 16”




8 Alloy Steel Rating : Rating 1500 Max size : 16”




10

Globe Valve



11 Alloy Steel Rating : 150-600 Max size : 20”


12 Stainlees Steel Rating 150-600 Max size : 20”


Alphacon Valfindo, PT 3 55,8313 Carbon Steel

Rating : 900 Max size : 16”

DATA PERUSAHAAN VALVE

52

53

DATA PERUSAHAAN VALVE

NO KIMAP

ProdukNama



14

G-75 Valve

Globe Valve

Alloy Steel Rating 900 Max size : 16”


Alphacon Valfindo, PT 3 16,35 2640 pcs/thn









19

Swing CheckValve





21 StainleesSteel Rating : 150-600 Max size : 24”














28

Gate Valve






30 Stainlees Steel Rating : 150-600 Max size : 36”














37

Water CheckValve

Carbon Steel Rating : 150-600 Max size 36”



38 Alloy Steel Rating : 150-600 Max size 36”


39 Stainlees Steel Rating : 150-600 Max size 36”


40

Plug Valve

Carbon Steel Rating : 150-600 Max size 12”



41 Alloy Steel Rating : 150-600 Max size 12”


42 Stainles Steel Rating : 150-600 Max size 12”


53

54

NO KIMAPProduk



1


Blow Out Preventer RAM &

Anullar• 3.1/16” to 29.1/2” 15.000 psi • API Spec

16A

Sarana Adikarya Utama

3 250 Unit /th

2 • Subsea Casing Hanger

• Size: 18 ¾” X 7” to 18 ¾” X 13 3/8” OD Casing

API Spec 17D

FMC Santana Petroluem Equipment

Indonesia, PT

3 4,35 30 Unit/Thn

3 • Subsea Running Tool

• Temporary Guide Base Running• Permanent Guide Base Running• 30” Manual Wellhead Running

Tool• 18 ¾” Manual Wellhead

Running Tool• Casing Hanger Manual RunningTool

• 13 3/8” Casing Hangger Running Tool

• 9 5/8” Casing Hanger Running Tool

• 18 ¾” Pac

API Spec 17D


Indonesia, PT

3 4,35 30 Unit/Thn

4 • Subsea Wear Bushing

• 18 ¾” Housing Wear Bushing• 18 ¾” X 7” to 18 ¾” X 13 3/8”

Wear Bushing

API Spec 17D


Indonesia, PT

3 4,35 30 Unit/Thn

5 • Subsea Wellhead • 30” Low Pressure Wellhead• 18 ¾” High Pressure Wellhead

API Spec 17D


Indonesia, PT

3 4,35 30 Unit/Thn

6 - Block Valve • Size: 2 1/16” to 7 1/16”Pressure: 2.000 to 15.000 PSI API Spec 6A


Indonesia, PT

3 36,12 4,35 250 U/Thn.

7 - Block X-Mas Tree

• Size: 2 1/16” to 7 1/16”Pressure: 2.000 to 15.000 PSI API Spec 6A


Indonesia, PT

3 4,35 250 U/Thn.

8 - Casing Hanger• Size: 11” X 7” / 5 ½” / 4 ½”

/ 3 ½” to 21 ¼” X 13 3/8” OD CSG

API Spec. 6A


Indonesia, PT

3 4,35 3.200 Unit/Thn

9- Choke Assembly

(Adjustable and Possitive Choke

• Size: 2 1/16” to 7 1/16”• Pressure: 2.000 to 15.000PSI API Spec 6A


Indonesia, PT

3 4,35 3.200 Unit/Thn

10- Conductor

Sharing Wellhead System

• 2 in 1• 3 in 1 API Spec.

6A


Indonesia, PT

3 4,35 3.200 Unit/Thn

11 - Flange and Clamp Connection

• Size: 7 1/6” to 21 ¼” X 7 1/16” to 21 ¼”

• Pressure: 2.000 to 15.000 PSIAPI Spec.

6A


Indonesia, PT

3 4,35 3.200 Unit/Thn

12 - Manual and Actuator Operated

• Size: 2 1/16” to 7 1/16”• Pressure: 2.000 to15.000 PSI API Spec 6A


Indonesia, PT

3 4,35 3.200 Unit/Thn

DATA PERUSAHAAN WELLHEAD & X-MAS TREE

54

55


NO KIMAPProduk Nama


13


- Slip on Lock Bottom X Clamp Hup Top

Connection

• Size: 7” to 20”• Pressure: 2.000 top 5.000 PSI API Spec.

6A


Indonesia, PT

3 4,35 3.200 Unit/Thn

14- Slip on Lock Bottom

X Flange Top Connection

• Size: 7” to 20”• Pressure: 2.000 to 5.000 PSI API Spec.

6A


Indonesia, PT

3 4,35 3.200 Unit/Thn

15- Slip on Weld Bottom

X Clamp Hub Top Connection


6A


Indonesia, PT

3 4,35 3.200 Unit/Thn

16- Slip on Weld Bottom

X Flange Top Connection


6A


Indonesia, PT

3 4,35 3.200 Unit/Thn

17 - Speed Loc II Clamp• Size : 21 ¼”, 11”, 13 5/8”• Pressure : 3.000 PSI, 5.000 Psi, 10.000 PSI

API Spec 6A


Indonesia, PT

3 4,35 3.200 Unit/Thn

18- Threaded Bottom X

Clamp Hup Top Connection

• Size: 7” to 20”• Pressure: 2.000 to 5.000 PSI

API Spec. 6A


Indonesia, PT

3 4,35 3.200 Unit/Thn

19- Threaded Bottom X

Flange Top Connection

• Size: 7” to 20”• Pressure: 2.000 to 5.000 PSI

API Spec. 6A


Indonesia, PT

3 4,35 3.200 Unit/Thn

20 - Tubing Hanger

• Size: Single T.H. Assy. 7 1/16” X 5 ½” / 4 ½” / 3 ½” / 2 7/8” / 2 3/8” to 13 5/8” X 7” / 5 ½” / 4 ½” / 3 ½” / 2 7/8” / 2 3/8”

• Size: Dual T.H. Assy. 7 1/16” X 2 3/8” X 2 3/8” to 13 5/8” X 5 ½” X 5 ½” / 4 ½” / 3 ½” / 2 7/8” /2 3/8”

API Spec. 6A


Indonesia, PT

3 4,35 3.200 Unit/Thn

21 - Unihead System • Size: 9” – 13 5/8”• Pressure: 5.000 to 10.000 PSI

API Spec. 6A


Indonesia, PT

3 51,23 4,35 3.200 Unit/Thn

22 • Annulus Packoff • 18 ¾” API Spec 17D


Indonesia, PT

3 4,35 30 Unit/Thn

23 • Drilling Spool • Drilling Spool• Drilling Riser

API Spec 17D


Indonesia, PT

3 4,35 30 Unit/Thn

24 • Guidance Equipment • Temporary Guide Base Assembly• Permanent Guide Base Assembly

API Spec 17D


Indonesia, PT

3 4,35 30 Unit/Thn

25 • Landing Sub Assembly • Size: 9 5/8” to 20” Landing Sub API Spec

17D


Indonesia, PT

3 4,35 30 Unit/Thn

55

56

56


NO KIMAPProduk



26


• MLS Casing Hanger • Size: 13 3/8” X 9 5/8” to 30” X 20” OD Casing API Spec 17D


Indonesia, PT

3 4,35 30 Unit/Thn

27 • Running and Retrieving Tool

• T.A. Cap Running and Retriving Tool

• 9 5/8” to 20” Washout Tool

• 9 5/8” Hanger Recess Clean Out Tool

API Spec 17D


Indonesia, PT

3 4,35 30 Unit/Thn

28 • Temporary Abandonment Cap • 18 ¾” API Spec 17D


Indonesia, PT

3 4,35 30 Unit/Thn

29 • Temporary Abandonment Cap

• 13 3/8” to 20” TemporaryAbandonment Cap API Spec 17D


Indonesia, PT

3 4,35 30 Unit/Thn

30 • Tieback Sub Assembly

• 9 5/8” to 20” Tieback Sub Assembly API Spec 17D


Indonesia, PT

3 4,35 30 Unit/Thn

31Casing Conductor & AccessoriesGroup

1,2,3,4- API Spec 5CT Sarana Adikarya

Utama 3 2000 Unit /th

32 Adjustable / Positive Choke

• SIZE-2" to 4.1/16"• Pressure Rating-2000 psi

to 10000 psiAPI Spec 6A Sarana Adikarya

Utama 3 37,67 2000 Unit /th

33 ANSI Flange and System

• SIZE- NOM 1/2" to 24"• Class 150 PSI to 500 PSI API Spec 6A Sarana Adikarya


34 API Gate Valve Oil & Gas

• SIZE-2.1/16" to 5.1/8"• Pressure Rating-2000 psi to 10000 psi API Spec 6A Sarana Adikarya


35 Casing Head• SIZE-4.1/16" to 21.1/4"• Pressure Rating-2000 psi to 10000 psi

API Spec 6A Sarana Adikarya Utama 3 45,89 2000 Unit

/th

36 Casing Spool• SIZE-4.1/16" to 21.1/4"• Pressure Rating-2000 psi to 15000 psi

API Spec 6A Sarana Adikarya Utama 3 45,8 2000

Unit/th

37 Companion Flange• SIZE- 2" to 20"• Pressure Rating-2000 psi to 5000 psi


/th

38 Expansion Spool• SIZE-7.1/16" to 21.1/4"• Pressure Rating-2000 psi to 5000 psi


/th

57


57

NO KIMAPProduk



39


Geothermal Casing Head

• SIZE-4.1/16" to 21.1/4"• Pressure Rating-2000 psi to 5000 psi

API Spec 6ASarana

Adikarya Utama, PT

3 45,89 2000 Unit /th

40 Geothermal Valve• SIZE-2" to 20"• Pressure Rating-300 psi to 5000 psi

API Spec 6ASarana

Adikarya Utama, PT

3 37,67 2000 Unit /th

41 Nipple, Elbow & Bull Plug

• SIZE-2" to 4.1/2"• Pressure Rating-2000 psi to 5000 psi

API Spec 6ASarana

Adikarya Utama, PT

3 44,4 2000 Unit /th

42 Rotary Drill Stem Elements

• Drill Stem job• Drill Collar• Threading for Rotary Shouldered connection

API Spec 6ASarana

Adikarya Utama, PT

3 2000 Unit /th

43 Solid Block X-mas Tree

• SIZE-2.1/16" to 5.1/8"• Pressure Rating-2000 psi to 15000 psi

API Spec 6ASarana

Adikarya Utama, PT

3 38,18 2000 Unit /th

44 Tubing Spool

• SIZE-4.1/16" to 13.5/8”• Pressure Rating-2000 psi to 15000 psi

• PSL 1-4

API Spec 6ASarana

Adikarya Utama, PT

3 45,8 2000 Unit/th

45 Unitized Wellhead• SIZE-7.1/16" to 21.1/4"• Pressure Rating-2000 psi to

15000 psiAPI Spec 6A

Sarana Adikarya

Utama, PT 3 45,89 2000 Unit

/th

46Weld neck

Flange• SIZE- 2" to 20"• Pressure Rating-2000 psi to 5000 psi

API Spec 6ASarana

Adikarya Utama, PT

3 44,4 2000 Unit /th

47 X-mas Tree• SIZE-2.1/16" to 4.1/16"• Pressure Rating-2000 psi to 15000 psi

API Spec 6ASarana

Adikarya Utama, PT

3 37,67 2000 Unit /th

48 X-mas Tree• SIZE-7.1/16" to 16"• Pressure Rating-2000 psi to 5000 psi

API Spec 6ASarana

Adikarya Utama, PT

3 37,67 2000 Unit /th

58

58

5955

6056

61

KEMENTERIAN ENERGI DAN SUMBER DAYA MINERAL DIREKTORAT JENDERAL MINYAK DAN GAS BUMI

KEMAMPUAN USAHA PENUNJANG MIGAS PT ALPHACON VALFINDO

STATUS USAHA : Akte Pendirian Perusahaan No. 265 oleh Notaris Drs.H. Saidus Sjahar, SH., pada tanggal 31 Desember 1990 di

Jakarta Surat Persetujuan Penanaman Modal Dalam Negeri No. 203/I/PMDN/1992 tanggal 8 Juli 1992 di Jakarta Surat Izin Usaha Industri No. 025/Banten 01-14/ILMEA/ b/Iz.00.03/X/2001 tanggal 10 Oktober 2001 oleh Dinas

Perindustrian, Perdagangan dan Koperasi di Serang Surat Keterangan Terdaftar No. 996/SKT/Daf/DMT/2008 tanggal 31 Oktober 2008. Surat Kemampuan Usaha Penunjang (SKUP) Migas No. 16744/19.07/DMB/2010 tanggal 7 Juni 2010.

SISTEM MANAJEMEN :

Sistem Manajemen Mutu : - ISO : 9001:2000 No. 09/QM/100 tanggal 18 Februari 2009 oleh KAN berlaku sampai dengan 17 Februari 2012 - API Specification Q1 No. Q1-1071 tanggal 3 Mei 2010 oleh American Petroleum Institute berlaku sampai dengan

tanggal 3 Mei 2013 - ISO/TS 29001 No. TS-0951 Design and Manufacture of Valves tanggal 3 Mei 2010 oleh American Petroleum

Institute berlaku sampai dengan tanggal 3 Mei 2013 - APIQR No. 1271 ISO 9001:2008 Design and Manufacture of Valves tanggal 3 Mei 2010 oleh American Petroleum

Institute berlaku sampai dengan tanggal 3 Mei 2013 Sistem Manajemen Lingkungan : HSEMS Manual Sistem Manajemen Keselamatan Kerja : -

KEMAMPUAN PRODUKSI DALAM NEGERI:

HASIL PRODUKSI

JENIS PRODUK SPESIFIKASI STANDAR PRODUK

SERTIFIKAT PRODUK

%TKDN

KAPASITAS CARBON

STEEL

ALLOY

STEEL

STAINLEES

STEEL

Valve Ball Valve Rating : 150-600

Max size : 24” API 6D

ANSI B 16.34

ANSI B 16.5 ANSI B16.10

ANSI B16.11 ANSIB1.20.1 ANSI B31.3

API 6D License 6D-0805

49,67 15,73 21,64 Terlampir


42,05 20,01 26,11


44,40 17,13 23,05

Globe Valve Rating : 150-600 Max size : 20”

API 600

BS 1873 ANSI B16.34

ANSI B 16.10 ANSI B16.5 ANSI B16.25

API 598

API 600 License 600-0053API 602 License 602-003

50,72 15,95 22,04


55,83 16,35 23,01


55,87 14,64 20,39

Swing Check Valv

Rating : 150-600 Max size : 24”

API 600

BS 1868 ANSI B 16.10 ANSI B16.5

ANSI B16.47 ANSI B16.25

API 598

API 6D License 6D-0805API 600 License 600-0053

56,02 14,68 20,45


60,67 17,10 24,46


56,99 14,78 20,66

Rating : 900 Max Size : 16”

48,29 16,81 23,04

PERINGKAT

NILAI BMP

62


HASIL PRODUKSI


SERTIFIKAT PRODUK

%TKDN KAPASITAS

CARBON

STEEL

ALLOY

STEEL

STAINLEES

STEEL

Gate Valve Rating : 150 – 600

Max Size : 36”

API 600

ANSI B16.34 ANSI B 16.10 ANSI B16.5


ANSIB1.20.1 API 598

API 600 License 600-0053API 602 License 602-003API 6D License 6D-0805

48,69 14,53 19,80


48,29 16,81 23,04


49,52 14,35 19,58

Wafer Check Valve

Rating : 150 – 600 Max Size : 36”

API 6D

API 594

ANSI B 16.34 ANSI B 16.5


ANSIB1.20.1 ANSI B31.3


50,20 13,71 18,62

Plug Valve Rating : 150 – 600 Max Size : 12”

API 6D

ANSI B 16.34 ANSI B 16.5

ANSI B16.10

ANSI B16.11 ANSIB1.20.1 ANSI B31.3


55,16 11,29 18,92

Kantor Pusat/ Pemasaran : Wisma GKBI 39th Floor, Suite 3901 Jl. Jend. Sudirman No. 28, Jakarta Telepon : (021) 57998190, 5670838; Faksimili : (021) 57998080, 5670839 E-Mail : [email protected] Penanggung Jawab : Leon Wijaya (Managing Director) Contact Person : Agent

Pabrik:Jl. Raya Rangkas Bitung Km. 8,5 Ds. Majasari Kec. Jawilan, Kab. Serang-Banten Telp. (0254) 480 566, 480 909, 480 408, Fax. (0254) 480 565, 480 708

63

Lampiran :

Hasil Produksi Max size

% TKDN Kapasitas/Tahun (Pcs) Rating Carbon

SteelAlloy Steel

StainleesSteel 2" - 4" 8" - 10" 12" - 14" 16" - 20" 24" 28" - 30" 32' - 36"

Ball Valve 150 - 600 24“ 49,67 15,73 21,64

26.400 7.920 5.280 2.640 2.112 528 264

900 16“ 42,05 20,01 26,11

1500 16“ 44,40 17,13 23,05

Gate Valve

150 - 600 36” 48,69 14,53 19,80

900 16” 48,29 16,81 23,04

1500 16” 49,52 14,35 19,58

Globe Valve

150 - 600 20” 50,72 15,95 22,04

900 16” 55,83 16,35 23,01

1500 16” 55,87 14,64 20,39

Plug Valve 150 - 600 12” 55,16 11,29 18,92

Swing Check Valve

150 - 600 24” 56,02 14,68 20,45

900 16” 60,67 17,10 24,46

1500 16” 56,99 14,78 20,66

Wafer Check Valve 150 - 600 36” 50,20 13,71 18,62

64


KEMAMPUAN USAHA PENUNJANG MIGAS PT. BUKAKA TEKNIK UTAMA

STATUS USAHA : Akta Pendirian Perusahaan No. 149 oleh h. Bebasa D. L., SH tanggal 25 Oktober 1978 di Jakarta Surat Ijin Usaha Industri No. 801/T/INUSTRI/1994, tanggal 24 Oktober 1994, oleh Menteri Perindustrian Surat Keterangan Terdaftar (SKT) Migas No. 796/SKT/DU.12/DMT/2008 Tanggal 28 Agustus 2008 Surat Kemampuan Usaha Penunjang (SKUP) Migas No. 28456/19.07/DMB/2010 tanggal 9 November 2010

SISTEM MANAJEMEN : Sistem Manajemen Mutu ISO 9001:2008 No. 0527, tanggal 17 Desember 2007, oleh AP Quality Registrar, berlaku

sampai dengan 17 Desember 2010. Sistem Manajemen Lingkungan : ISO-14001:2004, No. QS5120, tanggal 27 Desember 2010, oleh Worldwide Quality

Assurance, berlaku sampai 17 Desember 2010. Sistem Manajemen Keselamatan Kerja : OHSAS 18001:2007, No. 37323/A/0001/UK/En, tanggal 20 November 2009,

oleh UKAS Management Systems, berlaku sampai dengan 19 November 2012.

KEMAMPUAN PRODUKSI DALAM NEGERI :

1. Kemampuan Produksi Barang

HASIL PRODUKSI JENIS PRODUK SPESIFIKASI STANDAR PRODUK SERTIFIKAT

PRODUK TKDN KAPASITAS

Pumping Unit Conventional

Model : C40 – C912 API Torque Rating : 40.000 – 912.000 in.lbs Polished Rod Capacity : 7.600 lbs – 36.500 lbs Stroke Length : 42 – 168 in

API SPEC 11E API SPEC 11E No. 11E-0049 tanggal 13 Juni 2007 diterbitkan oleh American Petroleum Institute, berlaku sampai dengan 17 Desember 2010

61,09 % 720Unit/Tahun

Mark two Model

Model : M114 – M1280API Torque Rating : 114.000 – 1.280.000 in.lbs Polished Rod Capacity : 14.300 lbs –42.700 lbs Stroke Length : 64 – 216 in

-

Beam Balance

Model : B25 – B57 API Torque Rating : 25.000 – 57.000 in.lbs Polished Rod Capacity : 5.300 lbs – 7.600 lbs Stroke Length : 30 – 54 in

-

Mud Tank ( Tangki Lumpur ) Slugging Pit

Kapasitas : 55,42 Bbls, Material : ASTM A 36 or JIS SS 400


24 Unit/Tahun

Mixing Tank Kapasitas : 66,51 Bbls, Material : ASTM A 36 or JIS SS 400

Active Tank Kapasitas : 72,56 Bbls - 400 Bbls, Material : ASTM A 36 or JIS SS 400

Desilter Tank Kapasitas : 48,37 Bbls, Material : ASTM A 36 or JIS SS 400

Trip Tank Kapasitas : 55,42 Bbls, Material : ASTM A 36 or JIS SS 400

Shaker Tank Kapasitas : 72,56 Bbls - 400 Bbls, Material : ASTM A 36 or JIS SS 400

Mud Gas Sparator Degasser Dimensi : Diameter : 30 - 48” panjang Shell to Shell 108 – 212” Material A 516 Gr. 70

PERINGKAT

NILAI BMP

65

2. Kemampuan Produksi Jasa

KELOMPOK JASA BIDANG JASA KEMAMPUAN JASA SPESIFIKASI STANDAR TKDN KAPASITAS

Jasa Non Konstruksi

Pemeliharaan dan pengoperasian

Pemeliharaan dan pengoperasian Pumping Unit

API Spesification API SPEC 11E

- 1800Unit/Tahun

Kantor Pusat dan Pabrik : Kantor Cabang : Jl. Raya Cibinong Km 19,5 Jl. Raya Kulim Km. 9Cileungsi Kab. Bogor 16820, Jawa Barat Duri Riau Telepon : 021-8232323, Ext 322 Telepon : 0765-560789 Fax : 021-8231769 Fax : 0765-560388 E-mail : [email protected] E-mail : [email protected] : www.bukaka.com Website : www.bukaka.comPenanggung Jawab Utama : Ir. Achmad Kalla Contact Person : Indra Mahkota Penanggung Jawab Produksi : Setyadi Contact Person : Abdul Malik Abidin

66

Model Conventional MODEL C40-76-42 C57-95-48 C80-109-48 C114-143-64 C114-143-74 C114-119-100

Crank Counter Balance Conventional Conventional Conventional Conventional Conventional Conventional

API Torque Rating 40,000 in.lbs. 57,000 in.lbs. 80,000 in.lbs. 114,000 in.lbs. 114,000 in.lbs. 114,000 in.lbs.

Polished Rod Capacity 7,600 lbs. 9,500 lbs. 10,900 lbs. 14,300 lbs. 14,300 lbs. 11,900 lbs.

Stroke Length 42” 48” 48” 64” 74” 100”

MODEL C 160-173-74 C160-173-100 C228-173-100 C228-213-86 C320-256-100 C456-213-120




Stroke Length 74” 100” 100” 86” 100” 120”

MODEL C456-305-120 C456-256-144 C640-305-144 C640-305-168 C912-365-144 C912-365-168




Stroke Length 120” 144” 144” 168” 144” 168”

Model Mark II MODEL M114-143-64 M114-143-74 M160-173-100 M228-173-100 M228-213-86 M228-256-120

Crank Counter Balance Mark II Mark II Mark II Mark II Mark II Mark II



Stroke Length 64” 74” 74” 86” 100” 120”

MODEL M320-256-100 M320-305-120 M456-305-120 M456-256-144 M640-305-144 M640-305-168

Crank Counter Balance Mark II Mark II Mark II Mark II Mark II Mark II



Stroke Length 100” 120” 120” 144” 144” 168”

MODEL M912-365-144 M912-365-168 M912-365-216 M1280-427-216

Crank Counter Balance Mark II Mark II Mark II Mark II

API Torque Rating 912,000 in.lbs. 912,000 in.lbs. 912,000 in.lbs. 1,280,000 in.lbs.

Polished Rod Capacity 36,500 lbs. 36,500 lbs. 36,500 lbs. 42,700 lbs.

Stroke Length 144” 168” 216” 216”

67


KEMAMPUAN USAHA PENUNJANG MIGAS PT. CLADTEK BI METAL MANUFACTURING

STATUS USAHA : Akta Pendirian Perusahaan, Notaris Siti Masnuroh, SH No. 24, tanggal 12 April 2007, di Jakarta. PerusahaanPenanaman Modal Asing (PMA), berdasarkan Surat Persetujuan Kepala BKPM tentang Surat Persetujuan

Penanaman modal No.24/K1/I/PMA/2007 dikeluarkan oleh BKPM tanggal 5 April 2007. Surat Ijin Usaha Industri No.41/INDUSTRI/PMA/VIII/2008 oleh Otorita Pengembangan Daerah Industri Pulau Batam

tanggal 13 Agustus 2008. Surat Keterangan Terdaftar (SKT) Migas : No. 0050/SKT-03/DMT/2010 tanggal 23 Agustus 2010 Surat Kemampuan Usaha Penunjang (SKUP) Migas No. 24416/19.07/SKUP/DMB/2010 tanggal 28 September 2010

SISTEM MANAJEMEN : Sistem Manajemen Mutu :

- ISO 9001 : 2008 No.0990 tanggal 26 April 2010 oleh Badan American Petroleum Institute Quality Registrar berlaku sampai dengan 26 April 2013.

- ISO/TS 29001 Nomor: TS-0600 tanggal 26 April 2010 oleh Badan American Petroleum Institute Quality Registrar berlaku sampai 26 April 2013.

- API Specification Q1 Nomor : Q1-0767 tanggal 26 April 2010 oleh Badan American Petroleum Institute Quality Registrar berlaku sampai 26 April 2013.

Sistem Manajemen Lingkungan : -Sistem Manajemen Keselamatan Kerja : -


HASILPRODUKSI JENIS PRODUK SPESIFIKASI STANDAR

PRODUKSERTIFIKAT


Pipe & Accessories

Corrosive Resistant Alloy Pipe

Grade 304/304L, 316/316L, 904L, Alloy 825, Alloy 625 Dia 4”-26”

API Spec 5LC API Spec 5LC No. lisensi 5LC-0019 tgl 26 April 2010 berlaku s/d 26 April 2013

0,5Km/Hari

Bi Metal Corrosive Resistant Alloy Lined Pipe

Base Material: API 5L X52, X60 X65, X70, DNV 415, 450CRA Material: SS316L,SS 904L, Alloy 825, Alloy 625 Dia : 4” – 42”

API Spec 5LD API Spec 5LD No. lisensi 5LD-0007 tgl 26 April 2010, berlaku s/d 26 April 2013.

1 Km/Hari

Weld Overlay Clad piping components(Pipe, Flange, Fitting, etc )

Overlay Material: SS316L, SS347, Alloy 200, 400, Alloy 825, Alloy 625, Duplex 2209, etc

API Spec 5LD API Spec 5LD No. lisensi 5LD-0007 tgl 26 April 2010, berlaku s/d 26 April 2013.

20 M2/Hari

Kantor Pusat/ Pemasaran : Jl. Tenggiri, Batu Ampar, Batam 29452 Telepon : (0778) 414137 / 413808 Faksimili : (0778) 413168 E-Mail : [email protected] / [email protected] Jawab : Gordon Ross (Group General Manager)

Pabrik:Jl. Tenggiri, Batu Ampar, Batam 29452 Telepon : (0778) 414137 / 413808 Faksimili : (0778) 413168 E-Mail : [email protected] / [email protected] Jawab : Gordon Ross (Group General Manager)

PERINGKAT

NILAI BMP

68


KEMAMPUAN USAHA PENUNJANG MIGAS PT. FMC SANTANA PETROLEUM EQUIPMENT INDONESIA

STATUS USAHA : Akte Pendirian Perusahaan, Notaris Juliaan Nimrod Siregar, SH No. 20, tanggal 20 Maret 1985, di Jakarta Perusahaan Penanaman Modal Asing (PMA), berdasarkan surat keputusan Ketua BKPM No.

46/T/PERTAMBANGAN/1986 Tanggal 25 April 1986 tentang Ijin Usaha Tetap Surat Keterangan Terdaftar (SKT) Migas : No. 0004/SKT-03/DMT/2010 tanggal 28 Januari 2010 Surat Kemampuan Usaha Penunjang (SKUP) Migas No. 27514/19.07/SKUP/DMB/2010 tanggal 29 Oktober 2010

SISTEM MANAJEMEN : Sistem Manajemen Mutu : ISO 9001:2000 No. 51132-2009-AQ-SNG-UKAS tanggal 24 April 2009 oleh badan

sertifikasi Det Norske Veritas Management System Certificate berlaku sampai dengan 24 Desember 2011 Sistem Manajemen Lingkungan : ISO 14001:2004 No. 79327-2010-AE-SNG-UKAS tanggal 18 Agustus 2010 oleh

badan sertfikasi Det Norske Veritas Management System Certificate berlaku sampai dengan 18 Agustus 2013 Sistem Manajemen Keselamatan Kerja : OHSAS 18001:2007 No. 3779328-2010-HSO-SNG-DNV tanggal 18 Agustus

2101 oleh badan sertifikasi Det Norske Veritas Management System Certificate berlaku sampai dengan 18 Agustus 2013

KEMAMPUAN PRODUKSI DALAM NEGERI : HASIL

PRODUKSI JENIS PRODUK SPESIFIKASI STANDAR PRODUK

SERTIFIKAT PRODUK

TKDN (%) KAPASITAS

Surface Wellhead Equipment and X-Mas Tree

Casing Head/Starter Head/Branden Head - Slip on Weld Bottom X

Flange Top Connection

- Slip on Weld Bottom X Clamp Hub Top Connection

- Slip on Lock Bottom X Flange Top Connection

- Slip on Lock Bottom X Clamp Hup Top Connection

- Threaded Bottom X Flange Top Connection

- Threaded Bottom X Clamp Hup Top Connection

- Unihead System

- Conductor Sharing Wellhead System

Tubing Head Spool - Flange and Clamp

Connection

- Casing Hanger

- Tubing Hanger

Gate Valve - Speed Loc II Clamp

- Manual and Actuator Operated

Size: 7” to 20” Pressure: 2.000 to

5.000 PSI


5.000 PSI


5.000 PSI

Size: 7” to 20” Pressure: 2.000 top

5.000 PSI


5.000 PSI


5.000 PSI

Size: 9” – 13 5/8” Pressure: 5.000 to

10.000 PSI

2 in 1 3 in 1

Size: 7 1/6” to 21 ¼” X 7 1/16” to 21 ¼”

Pressure: 2.000 to 15.000 PSI

Size: 11” X 7” / 5 ½” / 4 ½” / 3 ½” to 21 ¼” X 13 3/8”OD CSG

Size: Single T.H. Assy. 7 1/16” X 5 ½” / 4 ½” / 3 ½” / 2 7/8” / 2 3/8” to 13 5/8” X 7” / 5 ½” / 4 ½” / 3 ½” / 2 7/8” / 2 3/8”

API Spec. 6A

API Spec 16A

API Spec 6A No Lisensi 6A-0040.8 tgl 15 Oct 2008 berlaku s/d 15 Oct 2011

API Spec 16 A No Lisensi 16A-0005 tgl 15 Oct 2008 berlaku s/d 15 Oct 2011

51,23

51,23

3.200 Unit/Thn

PERINGKAT

NILAI BMP 4,35 %

69

HASIL PRODUKSI


SERTIFIKAT PRODUK

TKDN (%)

KAPASITAS

MudlinesSuspendion System (MLS)/Wellhead Equipment

- Choke Assembly (Adjustable and Possitive Choke)

- Block Valve

- Block X-Mas Tree

Drilling Spool - Drilling Equipment for

Drilling Contractor

MLS Casing Hanger

Landing Sub Assembly

Temporary Abandonment Cap

Tieback Sub Assembly

Running and Retrieving Tool

Guidance Equipment

Subsea Wellhead

Subsea Casing Hanger

Annulus Packoff

Temporary Abandonment Cap

Subsea Wear Bushing

Subsea Running Tool

Size: Dual T.H. Assy. 7 1/16” X 2 3/8” X 2 3/8” to 13 5/8” X 5 ½” X 5 ½” / 4 ½” / 3 ½” / 2 7/8” / 2 3/8”

Size : 21 ¼”, 11”, 13 5/8”

Pressure : 3.000 PSI, 5.000 Psi, 10.000 PSI

Size: 2 1/16” to 7 1/16”

Pressure: 2.000 to15.000 PSI

Size: 2 1/16” to 7 1/16”

Pressure: 2.000 to 15.000PSI

Size: 2 1/16” to 7 1/16” Pressure: 2.000 to 15.000 PSI

Size: 2 1/16” to 7 1/16” Pressure: 2.000 to 15.000 PSI

Drilling Spool Drilling Riser

Size: 13 3/8” X 9 5/8” to 30” X 20” OD Casing

Size: 9 5/8” to 20” Landing Sub

13 3/8” to 20” Temporary Abandonment Cap

9 5/8” to 20” Tieback Sub Assembly

T.A. Cap Running and Retriving Tool

9 5/8” to 20” Washout Tool

9 5/8” Hanger Recess Clean Out Tool

Temporary Guide Base Assembly

Permanent Guide Base Assembly

30” Low Pressure Wellhead

18 ¾” High Pressure Wellhead

Size: 18 ¾” X 7” to 18 ¾” X 13 3/8” OD Casing

18 ¾”

18 ¾”

18 ¾” Housing Wear

API Spec 17D

API Spec 17D

API Spec 17D Sertifikat No. 17D-0004.4 Tgl. 15 Oktober 2008 s/d 15 Oktober 2011

API Spec 17D Sertifikat No. 17D-0004.4 Tgl. 15 Oktober 2008 s/d 15 Oktober 2011

36,12% 250U/Thn.

30 U/Thn.

70

HASIL PRODUKSI


SERTIFIKAT PRODUK

TKDN (%)

KAPASITAS

Bushing 18 ¾” X 7” to 18 ¾” X

13 3/8” Wear Bushing

Temporary Guide Base Running

Permanent Guide Base Running

30” Manual Wellhead Running Tool

18 ¾” Manual Wellhead Running Tool

Casing Hanger Manual Running Tool

13 3/8” Casing Hangger Running Tool

9 5/8” Casing Hanger Running Tool

18 ¾” Packoff Running Tool

Single Trip Running Tool

Universal Wear Bushing Running Tool

18 ¾” Bottom Seated Test Plug

18 ¾” Cement Clean Out Tool

Temporary Abandonment Cap Running Tool

Emergency Hang Off Tool

Landing Sub Emergency Hang Off Tool

Adapter Sub Emergency Hang Off Tool

KEMAMPUAN PRODUKSI JASA KELOMPOK

JASA BIDANG JASA KEMAMPUAN JASA SPESIFIKASI STANDAR TKDN KAPASITAS

Jasa Perbaikan dan Perawatan Produk-produk Fluid Control

- Chiksan Original Swivel Joints - Chiksan Cementing & Circulating Hoses - FMC Swing Joints - Dynetor Connector - Weco Original Wing Unions - Weco Integral Pup Joints - Weco Butterfly Valve, Operators &

Actuators - Weco Plug Valve, Operators & Actuators - Chiksan Mud Mixing Guns - FMC Flowline Check Valves - FMC Manifolds - FMC Pressure Relief Valves

Client Spec. - Hydrill - API Spec. 6A - API Spec. 16A

API Spec 6A

API Spec 16 A

1.000 Set/Th

Kantor Pusat dan Pabrik : Kantor Cabang : Jalan Raya Cakung Cilincing Km. 2,5 Ruko Balikpapan Baru, Little China Block AB5 No.2 Jakarta Utara 14010 Balikpapan Kalimantan Timur Telephon : (021) 4404151 Telepon : (0542) 878690 Fax : (021) 4400311 Fax : (0542) 874986 Email : [email protected] Penanggung Jawab : Howard Short Website : www.fmctechologies.com Contac Person : Sinar Sembiring & Mustofa Penanggung Jawab : Howard Short Contact Person : Nuly Nazlia

71


KEMAMPUAN USAHA PENUNJANG MIGAS PT. HEMPEL INDONESIA

STATUS USAHA : Akta Pendirian Perusahaan, NotarisMoendjiati Soegito, SH No. 3, tanggal 5 Desember 2001, di Jakarta. PerusahaanPenanaman Modal Asing (PMA), berdasarkan Surat Persetujuan Persetujuan Presiden RI No. B-

47/Pres/B/72 tanggal 5 Mei 1972. Surat Ijin Usaha Industri No.217/T/INDUSTRI/2002 oleh Badan Koordinasi Penanaman Modal tanggal 9 Agustus 2002. Surat Keterangan Terdaftar (SKT) Migas : - Surat Kemampuan Usaha Penunjang (SKUP) Migas No. 495/19.07/SKUP/DMB/2011 tanggal 10 Januari 2011


- ISO 9001 : 2000 No.SNG 0160170/C tanggal 28 Oktober 2008 oleh Lloyds Registrar Quality Assurence Limited berlaku sampai dengan 31 Oktober 2011.

- QS-Certifikat of Assement-EC No.MED-D-841 tanggal 7 Juli 2007 oleh DNV, berlaku s.d. 07 Juli 2011. Sistem Manajemen Lingkungan : ISO 14001 : 2004 No. SNG 0190029/C tanggal 21 November 2008 oleh Lloyds Register Quality Assurence Limited berlaku sampai 20 November 2011Sistem Manajemen Keselamatan Kerja : -


HASIL PRODUKSI JENIS PRODUK

Spesifikasi TKDN KAPASITAS Kekentalan

(Vol. Solid) Ketebalan

(DFT)

Cat & Thinner FOULING CONTROL

Self Polishing Antifouling - Hempel’s Antifouling Globic Range

8190K/2K/5K/7K- Hempel’s Antifouling NCT

Range 8190M/0N/5M/5N- Hempel’s Antifouling Oceanic range

8492K/5K - Hempel’s Antifouling Olympic range

86900/50 Fouling release - Hempasil 77500 Fouling release - Hempasil 77100

57 + 1 %

55 + 1 %

57 + 1 %

52 + 1 %

69 + 1 %

70 + 1 %

80 mikron-150 mikron




150 mikron

150 mikron

50 mikron-150 mikron 50 mikron 10 mikron- 20 mikron

40 Mikron 120 mikron

25 mikron 35 mikron

5,5 Juta Ltr/tahun

ZINC SILICATE

Inorganic Zinc Silicate - Hempel’s galvosil 15700 - empel’s Galvosil 15780 - Hempel’s Shop primer 15890

64 + 1 %61 + 1 %28 + 1 %


Silicone - Hempel’s Silicone Zinc 16900 - Hempel’s Silicone Acrylic 56940 Polysiloxane - Hempel’s Silicone Aluminium 56910 - Hempaxane 55000

54 + 1 %70 + 1 %

35 + 1 %84 + 1 %

PERINGKAT

NILAI BMP

72

HASIL PRODUKSI JENIS PRODUK

Spesifikasi TKDN KAPASITAS Kekentalan

(Vol. Solid) Ketebalan

(DFT)

EPOXIES

Zinc Epoxy - Hempadur Zinc 15360 - Hempadur Zinc 17360 Pure Epoxy Tank Lining - Hempadur 15400 - Hempadur 15500 Abrasion resistant epoxy - Hempadur Multi Strenght 45751/3 Solvent Free Epoxy - Hempadur spray guard 35490 - Hempadur multi strength 35530 Epoxy Mastic - Hempadur mastic 54881/3 Epoxy - Hempadur Quatro 17634 - Hempadur 15570 Epoxy Sealer/Tie Coat - Hempadur 45182 Glass Flake Epoxy - Hempadur Multi strength GF 35870 Universal Primer - Hempadur 17630/3 Epoxy Primer - Hempadur primer 15300 - Hempadur 15552

50 + 1 %65 + 1 %

48 + 1 % 68 + 1 %

68 + 1 %

100 % 100 %

77 + 1 %

72 + 1 % 54 + 1 %

46 + 1 %

87 + 1 %

69 + 1 %

51 + 1 %42 + 1 %

15 mikron-50 mikron 40 mikron-50 mikron

80 mikron-125 mikron 100 mikron


100 mikron 200 mikron-300 mikron

125 mikron-200 mikn

125 mikron 100 mikron

75 mikron-25 mikron

350 mikron

150miron

25 miron-7 mikron 40 mikron

30 mikron 40 mikron

75 mikron

75 mikron-125 mikron 35 mikron


ALKYDS

Alkyd - Hempalin Enamel 52140 - Hempalin primer 12050 Modyfied Alkyd - Hempalin primer HB 13200

46 + 1 %49 + 1 %

44 + 1 %

ACRYLICS

Acrylic - Hempatex Hi build 46410 - Hempatex Enamel 56360

42 + 1 %33 + 1 %

MISCELLANEOUS

Chlorinated Rubber - Hempatex Hi build 46330 42 + 1 %

Kantor Pusat/ Pemasaran : Jl. Raya Sultan Agung Km 27 Pondok Ungu, Bekasi 17132 Telepon : (021) 8843385 (Hunting) Faksimili : (021) 8840820, 88953605 E-Mail : indonesia.id.hempel.com Penanggung Jawab : Jeyakumar Lakshminarayan (President Direktur)

73


KEMAMPUAN USAHA PENUNJANG MIGAS PT. KARYA DELI STEELINDO

STATUS USAHA : Akta Pendirian Perusahaan No. 14 Jhon Langsung, SH tanggal 16 Juli 1999 di Medan Surat Ijin Usaha Sesuai Bidang Usaha No. 56/02/IZ/ILMK/X/1999 oleh Kepala Kantor Wilayah Departemen

Perindustrian dan Perdagangan Propinsi Sumatra Utara tanggal 7 Oktober 1999 Surat Keterangan Terdaftar (SKT) Migas : - Surat Kemampuan Usaha Penunjang (SKUP) Migas No. 27512/19.07/SKUP/DMB/2010 tanggal 29 Oktober 2010

SISTEM MANAJEMEN : Sistem Manajemen Mutu : - Sistem Manajemen Lingkungan : - Sistem Manajemen Keselamatan Kerja : -


HASIL PRODUKSI JENIS PRODUK SPESIFIKASI STANDAR

PRODUK SERTIFIKAT


Machinery Accessories

&Instrument


Size Range : Ø 4”/4” - Ø 6”/6” Heads : 49 m / 160.8 Feet Capacities: to 155 m³ / hr Power: to17 (kW) Rotation: 1200 – 2600 (rpm) Material: Cast Iron and Stainless Steel 316

ANSI +/- 1200 unit / thn

ImpellersØ 120 mm - Ø 1000 mmMaterial : SUS 316

API, ANSI, JIS, ASTM,

BS+/- 2400 pcs / thn

Bushing

OD 188 x ID 100 x LG 407 mmOD 210x ID 150 x LG 662 mm Material : Stainless Steel

JIS +/- 3600 pcs / thn

Bearing Housing

Ø 1 ½” – Ø 6” Cast Iron (C.I), Graded and Alloy Cast Iron Material, Cast Steel Material, and Spheroid Graphitic (S.G) Iron Material

JIS, ASTM +/- 3000 set / thn

Tractor Shoe

PC 200 : 500 mm, 600 mm, 700 mm, 800 mm, 900 mm. PC 300: 600mm, 800 mm, 900 D63E : 510 mm D3C : 400 mm, 460 mm, 600 mmMaterial : Alloy Steel

- +/- 42000 set / thn

PERINGKAT

NILAI BMP

74


PRODUK SERTIFIKAT


Machinery Accessories

&Instrument

Flexible Shaft Coupling

90 mm s.d 630 mm Material : Cast Iron - +/- 1800 set / thn

Flanges Ø 3/8” s.d Ø 15” Stainless Steel ASME +/- 6000 pcs / thn

Sprocket Diamater 1200 mm Material Alloy Steel

JIS, ASTM, ANSI, BS +/- 60 ton / thn

Propeller Ø 28” – Ø 50” Stainless Steel - +/- 9600 pcs / thn

Link ChainOD 200 x ID 50 x LG 25 mm Low Alloy Steel

JIS, ASTM +/- 3000 meter / thn

Kantor dan Pabrik : Jl. Pulau Tanah Masa No. 168 Kawasan Industri Medan II Mabar- Medan Telepon : (061) 6871451 Fax : (061) 6871452 E-Mail : [email protected] : www.karyadeli.com Penanggung Jawab Utama : Lintong Go (Direktur Utama) Penanggung Jawab Produksi : Chun Kiat ( Manager Produksi) Contact Person : Ronny Wijaya

75


KEMAMPUAN USAHA PENUNJANG MIGAS PT KHI PIPE INDUSTRIES STATUS USAHA :

Akta Pendirian Perusahaan No. 40 oleh Notaris Imas Fatimah, SH,M.Kn tanggal 20 Mei 2010 di Jakarta Surat Ijin Usaha Industri No. 031/M/SK/IMLDE/II/92 tanggal 20 Pebruari 1992 di Jakarta Surat Keterangan Terdaftar (SKT) Migas No.0235/SKT-02/DMT/2010 Tgl. 08 Juni 2010. Surat Kemampuan Usaha Penunjang (SKUP) Migas No. 29577/19.07/SKUP/DMB/2010 tanggal 23 November

2010

SISTEM MANAJEMEN : Sistem Manajemen Mutu : ISO 9001:2008 No. Sertifikat 30276 Oleh ABS Quality Evaluation tgl. 23 Nopember 1993

berlaku s.d. 22 Nopember 2011. Sistem Manajemen Lingkungan : - Sistem Manajemen Keselamatan Kerja : -


HASIL PRODUKSI JENIS PRODUK SPESIFIKASI STANDAR PRODUK SERTIFIKAT PRODUK TKDN KAPASITAS

Pipe

Spiral DSAW & ERW Line Pipe for Oil & Gas Industries

Grade B, X42, X46, X52, X56, X60, X65, X70 Size as Specify in API Spec. 5L or Customer Spec

API Spec 5L SNI

API Spec 5LNo Sertifikat : 5L-0203.1Tgl. 17 Desember2003 Masa Berlaku : 17 Juni 2012

48,67%-54,90%

200.000Ton/Tahun

Spiral DSAW & ERW Pipe for Water Line Pipe


AWWA C-200 ASTM A53 DIN 2460 BS 3601 BS 534

- 48,51%

Spiral DSAW & ERW Pipe for pipe Pile


ASTM A-134 BS 4360

- 48,82%

Spiral DSAW & ERW Pipe for BuildingConstruction

Grade 2,3 Size as Specify in ASTM A-252 BS Spec. or Customer Spec.

ASTM A-252 BS 4360

ASTM A 252-98 No. Sertifikat : BVJKT/403012 Tgl. 17 Januari 2003

48,37%

JasaCoating

ExternalProtection

Bonded Asbestos Felt Wrap

Coal Tar Enamel, Fibrous Glass Mat & Bonded Double Asbestos Flet Mat

Coal Tar Enamel & Bonded Double Asbestos

Asphalt Coating, Dipping or Painting

Polyethylene or Polyvinyl Tape Coating

Epoxy Coating Fusion Bounded Epoxy Three Layer Polyethylene

Three Layer Polyprophylene

AWWA C203 AWWA C205 BSS 534

- - 450.000 m2/Tahun

Internal Coating Centrifugally Spun Cement/Mortar Lining

Internal Paint Epoxy Coating

- -

PERINGKAT

NILAI BMP

76

HASIL PRODUKSI JENIS PRODUK SPESIFIKASI STANDAR PRODUK SERTIFIKAT PRODUK TKDN KAPASITAS

JasaCoating

Concrete Weight External Pipe

Concrete Density 140-190 PCF

Concrete Thickness max 8 inch corresponding to max dia. 56 inch

Compression Strength of 6.000 psi corresponding to density 190 pcf.

ASTM C33 BS 3148 BS 1881

- - 360.000 m2/Tahun

Kantor Pusat/ Pemasaran : Pabrik :Kawasan Industri Cilegon, Banten Telepon : 021 – 392 438, 391 020 Fax : 021 – 392 083 Contact Person : Hidi Kuat Purwono

Gedung Krakatau Steel Lt. 7 Jl. Jend. Gatot Subroto Kav. 54, Jakarta 12950 Telepon : (021) 521 2761 Fax : (021) 520 4002 Website : http://www.kbj.co.idContact Person : Ir. Purwono Widodo

77


KEMAMPUAN USAHA PENUNJANG MIGAS PT. M-I PRODUCTION CHEMICALS INDONESIA

STATUS USAHA : Akta Pendirian Perusahaan, Notaris Yuliana Sianipar, SH No. 3, tanggal 19 Nopember 1997, di Bogor. PerusahaanPenanaman Modal Asing (PMA), berdasarkan Surat Persetujuan Kepala BKPM No.586/I/PMA/1997

dikeluarkan oleh BKPM tanggal 24 Oktober 1997. Surat Ijin Usaha Industri No.433/T/INDUSTRI/2000 oleh Badan Koordinasi Penanaman Modal tanggal7 Juli 2000. Surat Keterangan Terdaftar (SKT) Migas No. 0680/SKT-02/DMT/2010 tanggal4 Oktober 2010. Surat Kemampuan Usaha Penunjang (SKUP) Migas No. 31593/19.07/SKUP/DMB/2010 tanggal 16 Desember 2010

SISTEM MANAJEMEN : Sistem Manajemen Mutu ISO 9001 : 2008 No.QEC25421 tanggal 20 Februari 2009 oleh SAI Global berlaku sampai

dengan 25 September 2011. Sistem Manajemen Lingkungan : - Sistem Manajemen Keselamatan Kerja : -


HASIL PRODUKSI JENIS PRODUK Properties Specsifikasi Method KAPASITAS

Chemical Solvent Based-Demulsifier

- Specific Gravity - Flash Point

0.90-0.98 g/ml 104°F

ASTM D96, D93 API RP45

5.760 ton/tahun

Solvent Based-Reverse Demulsifier


0.90-1,20 g/ml 212°F

ASTM D96 EPA418.OS API RP45

Solvent Based-Corrosion Inhibitor


0.90-1.20 g/ml 145°F

ASTM B244 API RP45

Solvent Based-Pour Point Depresant


0.86-0.98 g/ml 104°F


Solvent Based-paraffin Solvent


0.90-1.30 g/ml 89.6°F


Water Based Reverse Demulsifier

- Specific Gravity - pH

0.90-1.30 g/ml 3.2-4.0


Water Based-Corrosion Inhibitor


0.90-1.20 g/ml 6.8-7.5

ASTM B244 , D1287 API RP45

Water Based-Scale Inhibitor


0.90-1.20 g/ml 3.5-4.5

ASTM B659 API RP45

PERINGKAT

NILAI BMP

78

HASIL PRODUKSI JENIS PRODUK Properties Specsifikasi Method KAPASITAS

Chemical Water Based-Biocide

- Specific Graviity - pH

0.90-1.20 g/ml 3.5-7.0


Water Based-Defoamer


0.90-1.30 g/ml 7.0-8.5


Water Based-Cleaner


0.90-1.30 g/ml 3.5-7.0

ASTM D1287 API RP45

Water Based-H2S Scavenger


0.90-1.20 g/ml 10-11.5

ASTM D4294 API RP45

Kantor / Pabrik : Jl. Jababeka XVII E, Blok U Kav. No. 27 A Cikarang Industrial Estate, Bekasi 17530 Telepon : (021) 8900305, 89105701 / 02 Faksimili : (021) 8900289 E-Mail : [email protected] Website : www.miswaco.com Penanggung Jawab : Roger W. Kidder (Direktur) Contact Person : Suryadi

79


KEMAMPUAN USAHA PENUNJANG MIGAS PT PERTAMINA (Persero)

STATUS USAHA : Akta Pendirian Perusahaan : KepMen HAM No. C-24025 HT.01.01 tahun 2003 Surat Ijin Usaha Industri : KepMen ESDM No 1566 K/10/MEM/2008 Tanggal 21 April 2008 Surat Kemampuan Usaha Penunjang (SKUP) Migas No. 31640/19.07/SKUP/DMB/2010 tanggal 14 Desember

2010

SISTEM MANAJEMEN : Sistem Manajemen Mutu ISO 9001:2008 No. 01-100021158 tanggal 26 Januari 2010 oleh TUV Rheinland Cert

GmbH berlaku sampai dengan 20 Januari 2012 Sistem Manajemen Lingkungan : ISO 14001 : 2004 No. 01-104021158 tanggal 11 Januari 2010 oleh TUV

Rheinland Cert GmbH berlaku sampai dengan 17 November 2012. Sistem Manajemen Keselamatan Kerja : BS OHSAS 18001:2007 No. 01-113021158 tanggal 29 Desember 2009

oleh TUV Rheinland Cert GmbH berlaku sampai dengan 28 Desember 2012. Sistem Akreditasi Laboratorium ISO/IEC 17025:2005 No. LP-134-IDN tanggal 22 Desember 2006 oleh Komite

Akreditasi Nasional berlaku sampai dengan 21 Desember 2010.


HASIL PRODUKSI

JENIS PRODUK SPESIFIKASI STANDAR SERTIFIKAT PRODUK

TKDN KAPASITAS (Drum/Tahun)

Chemicals (Drilling Fluid)

Base Oil ”SMOOTH FLUID SF-05”

Density @ 60ºF (Kg/Lt) : 0.800 –

0.835 ASTM D

1298 66,63%

1.753.714Barrels/Year

Flash Point PMCC (ºC) : 75 Min ASTM D 93

Viscosity at 40ºC (cSt) : 2.5 – 3.5 ASTM D 445

Aromatic(%Mass) : 0.05 Max UV Spectro

Distillation Range (ºC) - IBP

: 175 Min ASTM D 86

Pour Point (ºC)

: 5 Max ASTM D 97

Aniline Point (ºC) : 80 Min ASTM D 611

Color ASTM : 1.5 Max ASTM D 1500

Copper Strip : No. 1 Max ASTM D 130

Sulfur (ppm) : 40 Max ASTM D 2622

Kantor Pusat/ Pemasaran : PT. PERTAMINA (Persero) Jl. MEDAN MERDEKA TIMUR No. 1A Jakarta Pusat 10110 Telepon : (021) 3816717, 500000, 79173000; Faksimili : (021) 381500200, 7972177 E-Mail : [email protected] Penanggung Jawab : Direktur Utama Contact Person : VP Niaga PT. PERTAMINA (Persero) Email : [email protected]

Pabrik/Kilang:Refinery Unit V Balikpapan Jl. Yos Sudarso No. 1 Balikpapan Telp. (0542)733011 , Fax. (0542) 514149

PERINGKAT

NILAI BMP 3,00 %

80


KEMAMPUAN USAHA PENUNJANG MIGAS PT. PROWELL ENERGI SERVICE

STATUS USAHA : Akta Pendirian Perusahaan, Notaris Rohana Frieta, SH No. 1, tanggal 7 Pebruari 2007, di Jakarta. Surat Ijin Usaha Industri No.503.15/097/BPPT/IUI-00/IX/2010 oleh Badan Pelayanan Perizinan Terpadu tanggal 20

September 2010. Surat Keterangan Terdaftar (SKT) Migas : No. 0043/SKT-03/DMT/2010 tanggal 9 Agustus 2010 Surat Kemampuan Usaha Penunjang (SKUP) Migas No. 31952/19.07/SKUP/DMB/2010 tanggal 16 Desember 2010

SISTEM MANAJEMEN : Sistem Manajemen Mutu : ISO 9001 : 2000 No.6183c tanggal 12 Agustus 2008 oleh European Quality Assurance

Limited berlaku sampai dengan tanggal 11 Agustus 2011. Sistem Manajemen Lingkungan : -

Sistem Manajemen Keselamatan Kerja : OHSAS 18001 : 2007 Nomor : 1020c tanggal 15 Agustus 2008 oleh EQA (ASIA) PTE LTD berlaku sampai dengan tanggal 15 Agustus 2011.


1. Produksi Barang

HASIL PRODUKSI

JENIS PRODUK SPESIFIKASI STANDAR PRODUK SERTIFIKAT


Wireline Unit Complete with Power pack

Skid Mounted

Trailer Mounted

Cabin Mounted

Logging Truck

Drum Capacity: - Wire 0.092” s/d 15/32” - Wire Length 20000-25000ft

Power Pack: - Engine 40Hp s/d 250Hp - Safety Device Rig Safe, Zone1, Zone2

Mengacu pada : - DNV offshore Container 2.7.1 - BS EN 12.079 - SNI 13-6984-2004 & 13-6985-2004 - Client spec.

8 unit / tahun

6 unit / tahun

8 unit / tahun

4 unit / tahun

Pumping Unit Hydrostatic Pumping Unit

- Pressure range 0-10.000 Psi - Fluid deliver 0-100 liter/menit

5 unit / tahun

Wireline Tool Box

Tool Box Client spec. 20 unit / tahun

PERINGKAT

NILAI BMP

81

2. Produksi Jasa

KELOMPOK JASA

BIDANG JASA KEMAMPUAN JASA SPESIFIKASI STANDAR TKDN KAPASITAS

Non Konstruksi Pengoperasiandan perawatan

Wireline Unit : - Engine Overhaul - Rekondisi Pneumatic Hydraulic System - Rekondisi rangka struktur - Rebuild dan modifikasi Struktur - Modifikasi ukuran drum - Upgrade spesifikasi - Performance Test - Modifikasi Lifting

Client spec. Mengacu pada : - DNV offshore Container 2.7.1 - BS EN 12.079 - SNI 13-6984-2004 & 13-6985-2004 - Client spec.

± 20 unit / tahun

Kantor Pusat/ Pemasaran : The Bellagio Office Park, 2nd Floor - #1 Kawasan Mega Kuningan Barat VII, Kav. E4-3 Setiabudi – Jakarta 12950 Telepon : (021) 3001 9992 / 3 Faksimili : (021) 3002 0915 E-Mail : [email protected] : www.prowell-energy.comPenanggung Jawab : Ermin S. Nasution (Direktur Utama)

Pabrik:Delta Silicone, Jalan Kamper No.6, Cikarang Kel. Sukaresmi, Cikarang Barat – Bekasi Telepon : (021) 8990 2270 Faksimili : (021) 8990 2307 Email : [email protected] Jawab : Erwan Sutrisno (Fabrication Manager)

82


KEMAMPUAN USAHA PENUNJANG MIGAS PT. SARANA ADIKARYA UTAMA

STATUS USAHA : Akta Pendirian Perusahaan, Notaris Kartini Muljadi, SH No. 154, tanggal 27 Maret 1984, di Jakarta.

Perusahaan Penanaman Modal Dalam Negeri, berdasarkan Surat Persetujuan Kepala BKPM tentang Perubahan Status Perusahaan PMA menjadi PMDN No.97/III/PMDN/1989 dikeluarkan oleh BKPM tanggal 17 Februari 1989.

Surat Ijin Usaha Tetap tentang Pemberian Ijin Usaha Ketua Badan Koordinasi Penanaman Modal No. 65/T/INDUSTRI/1991 dikeluarkan oleh Ketua BKPM atas nama Menteri Perindustrian pada tanggal 1 Maret 1991.

Surat Keterangan Terdaftar (SKT) Migas : No. 163/SKT/DU.13/DMT/2009 tanggal 12 Februari 2009 Surat Kemampuan Usaha Penunjang (SKUP) Migas No. 27513/19.07/SKUP/DMB/2010 tanggal 29 Oktober 2010


ISO 9001:2008 No. 0175 tanggal 26 Oktober 2009 oleh badan sertifikasi APIQR (American Petroleum Institute Quality Registrar) berlaku sampai dengan 24 November 2011.

API Specification Q1 No. Q1-0974 tanggal 26 Oktober 2009 oleh badan sertifikasi API (American Petroleum Institute) berlaku sampai dengan 24 November 2011.

Mutu ISO/TS 29001 No. TS-0855 tanggal 26 Oktober 2009 oleh badan sertifikasi API (American Petroleum Institute) berlaku sampai dengan 24 November 2011.

Sistem Manajemen Lingkungan : - Sistem Manajemen Keselamatan Kerja : -


HASIL PRODUKSI

JENIS PRODUK

SPESIFIKASI STANDAR PRODUK

SERTIFIKAT PRODUK TKDN KAPASITAS

Wellhead & X-mas Tree

Casing Head SIZE-4.1/16" to 21.1/4" Pressure Rating-2000 psi to

10000 psi

API Spec 6A API Spec 6A No. lisensi 6A-0276 tgl 14 May 2009 berlaku s/d 24 November 2011.

.

.

45,89 % 2000 Unit /th

Casing Spool SIZE-4.1/16" to 21.1/4" Pressure Rating-2000 psi to

15000 psi

45,80 % 2000 Unit/th

Tubing Spool

SIZE-4.1/16" to 13.5/8” Pressure Rating-2000 psi to

15000 psi PSL 1-4

45,80 % 2000 Unit/th

X-mas Tree SIZE-2.1/16" to 4.1/16" Pressure Rating-2000 psi to

15000 psi

37,67 % 2000 Unit /th

Unitized Wellhead

SIZE-7.1/16" to 21.1/4" Pressure Rating-2000 psi to

15000 psi

45,89 % 2000 Unit /th

API Gate Valve Oil & Gas


10000 psi

37,67 % 2000 Unit /th

Adjustable/Positive Choke

SIZE-2" to 4.1/16" Pressure Rating-2000 psi to

10000 psi

37,67 % 2000 Unit /th

Nipple, Elbow & Bull Plug

SIZE-2" to 4.1/2" Pressure Rating-2000 psi to

5000 psi

44,40 % 2000 Unit /th

Solid Block X-mas Tree


15000 psi

38,18 % 2000 Unit /th

PERINGKAT

NILAI BMP

83


KEMAMPUAN PRODUKSI JASA

KELOMPOK JASA


NonKonstruksi

Pemeliharaan dan pengoperasian

Perbaikan dan pembuatan komponen baru untuk

Wellhead & X-mas Tree & accessories BOP Drilling Spool & Adapter Drill Collar Drill Stem Sub Threading for Rotary Shouldered Connection Pumping Unit Assembly

APISpecification

API Spec 16A API Spec 6A API Spec 16A API Spec 7-1 API Spec 7-1 API Spec 11E

1000Unit/thn

300 Unit/thn 200 Unit/thn

1500Unit/thn

1500Unit/thn

300 unit/thn

Kantor Pusat/ Pemasaran : Pabrik :Paramita Industrial Estate, Cicadas, Gunung Putri, Bogor, Indonesia Telepon : (021) 867 0901/0902 Fax : (021) 867 2290 E-Mail : [email protected] : http://www.sauwellheads.comPenanggung Jawab : A. Iman Santoso

Graha Paramita 1st floor, Jalan Denpasar Raya Blok D-2 Kav 8 Kuningan, Jakarta 12940, Indonesia Telepon : (021) 526 5165 Fax : (021) 526 5166/67 E-Mail : [email protected] : http://www.sauwellheads.comPenanggung Jawab : Franky Setiadi (Direktur Utama) Contact Person : Terence Wahyudi / Sebastian Umboh

HASIL PRODUKSI

JENIS PRODUK

SPESIFIKASI STANDAR PRODUK


Geothermal Casing Head

SIZE-4.1/16" to 21.1/4" Pressure Rating-2000 psi to 5000 psi

45,89 % 2000 Unit /th

Expansion Spool

SIZE-7.1/16" to 21.1/4" Pressure Rating-2000 psi to 5000 psi

45,80 %

2000 Unit /th

X-Mas Tree SIZE-7.1/16" to 16" Pressure Rating-2000 psi to 5000 psi

37,67 %

2000 Unit /th

Geothermal Valve

SIZE-2" to 20" Pressure Rating-300 psi to 5000 psi

37,67 %

2000 Unit /th

ANSI Flange and System

SIZE- NOM 1/2" to 24" Class 150 PSI to 500 PSI

44,40 %

2000 Unit /th

CompanionFlange

SIZE- 2" to 20" Pressure Rating-2000 psi to 5000 psi

44,40 %

2000 Unit /th

Weld neck Flange

SIZE- 2" to 20" Pressure Rating-2000 psi to 5000 psi

44,40 %

2000 Unit /th

Rotary Drill StemElements

Drill Stem job Drill Collar Threading for Rotary Shouldered connection

API Spec 7-1 API Spec 7-1 No. lisensi 7-1-0425 tgl 14 May 2009 berlaku s/d 24 November 2011.

2000 Unit /th

Pumping Unit Conventional C25-53-30 to C3648-470-300

API Spec 11E API Spec 11E No. lisensi 11E-0510 tgl 14 May 2009 berlaku s/d 24 November 2011.

54,26 %

1000 Unit /th

Blow Out Preventer RAM & Anullar

3.1/16” to 29.1/2” 15.000 psi API Spec 16A API Spec 16A No.

lisensi 16A-0071 tgl 14 May 2009 berlaku s/d 24 November 20011

250 Unit /th

Casing or TubingCoupling / Accessories/Threader

Group 1,2,3,4 API Spec 5CT

API Spec 5CT No. lisensi 16A-0071 tgl 14 May 2009 berlaku s/d 24 November 2011

2000 Unit /th

84


KEMAMPUAN USAHA PENUNJANG MIGAS PT. SOUTHERN TRISTAR

STATUS USAHA : Akte Pendirian Perusahaan No.13 oleh Notaris Maria Rahmawati Gunawan, SH., tanggal 23 Juli 2009 di Jakarta Surat Persetujuan Penanaman Modal Asing (PMA) No. 504/I/PMA/1995 oleh BKPM tanggal 19 September 1995 di

Jakarta. Surat Keterangan Terdaftar Migas No. 258/SKT/DU.3/DMT/2009 tanggal 6 Maret 2009 Surat Kemampuan Usaha Penunjang (SKUP) Migas No. 7485/19.07/SKUP/DMB/2011 tanggal 22 Maret 2011

SISTEM MANAJEMEN : Sistem Manajemen Mutu ISO 9001:2008 No. JKT0500219 tanggal 30 Agustus 2010 oleh badan sertifikasi Lloyd’s

Register berlaku sampai dengan 29 Agustus 2013 Sistem Manajemen Lingkungan : - Sistem Manajemen Keselamatan Kerja : -


HASIL PRODUKSI JENIS PRODUK SPESIFIKASI STANDAR SERTIFIKAT PRODUK

TKDN KAPASITAS

Sacrificial Anodes


Type : Platform, Jetty & Wharf, Bracelet, Tank, and Hull Anodes

NACE DNV RP

B401 AS 2239-

1993

500Ton/tahun

Zinc Alloy Anodes

Type : Tank and Rod MIL-18001-H

Magnesium Alloy Anodes

Type : Pipeline and Tank Bottom

NACE

Bolt - Nut and Fasteners

Heavy Hex Nut Diameter : ½ s.d 4 inch Material : Carbon Steel, Stainless Steel, Alloy Steel

Grade : 2H, 2HM, 7, 7M, 4, 4M, 8, 8M

Lapisan : - Cadmium plated - Zinc plated - Fluorocarbon coated

ASTM A194 400Ton/tahun

Tommy Bar Hole Nuts Diameter : ½ s.d 4 inch Material : Carbon Steel, Stainless Steel, Alloy Steel


ASTM A 193 ASTM A 194

Studbolts and Nuts

Diameter : ½ s.d 4 inch Material : Carbon Steel, Stainless Steel, Alloy Steel

Grade : B7, B7M, L7, L7M, B16, B8, B8M, 8T


Double Ended Studs

PERINGKAT

85

HASIL PRODUKSI JENIS PRODUK SPESIFIKASI STANDAR SERTIFIKAT PRODUK

TKDN KAPASITAS

Cable Support System

Metallic Cable Leader

Lampiran 1 NEMA 450Ton/tahun

Metallic Cable Tray

Cable TrunkingSystem

Metal Framing System

Kantor Pusat dan Pabrik I : Pabrik II :Cikarang Industrial Estate, Jl. Jababeka III H TOB Blok C No. 17J, Cikarang Bekasi 17550

Jl. Engku Putri Batam Centre Blok D2 No. 11 Executive Industrial Park Batam 29434

Telepon : (021) 893 5162, 898 40238 Telepon : (0778) 7482263 Fax : (021) 893 5163 Fax : (0778) 7482262 E-Mail : [email protected] E-Mail : [email protected] Website : ptsts.com Website : - Penanggung Jawab : Ukanda (Direktur) Penanggung Jawab : Rusmiyati (Factory Manager) Contact Person : I Gede Priamada (Marketing Manager) Martin ( Production Manager)

Contact Person : Rusmiyati

86

Lampiran 1


Cable Support System

Metallic Cable Leader Manufacturing Standard

NEMA Straight

Flat Bar Model FB ; Tinggi 38 s.d 100 mm

C Open Model CPL ; Tinggi 75 s.d 150 mm

C Inward Model CI ; Tinggi 75 s.d 150 mm

Heavy Duty Return Flange Type Ladder

Model HL ; Tinggi 75 s.d 160 mm

Heavy Duty Aluminium Ladder Model AI ; Tinggi 155 mm

Heavy Duty Corrugated Trough Model CT ; Tinggi 100 s.d 150 mm

Knock-Down Type Ladder Model KFL ; Tinggi 75 s.d 150 mm

Horizontal Elbow All Model ; Type Fitting LFB ; Width 150 s.d 900 mm

Crossover All Model ; Type Fitting LCO ; Width 150 s.d 900 mm

Tee All Model ; Type Fitting LUET ; Width 150 s.d 900 mm

Flexible Risers All Model ; Type Fitting FR ; Width 150 s.d 900 mm

Angle Risers All Model ; Type Fitting LIR dan LOR ; Width 150 s.d 900 mm

Arc Risers All Model ; Type Fitting LAIR dan LAOR ; Width 150 s.d 900 mm

Reducers All Model ; Type Fitting LLR, LCR, dan LRR ; Width 150 s.d 900 mm

Cable Ladder Accessories All Model ; Type Fitting LSSP, LHASP, LVASP, LSD, dan LOR ; Width 150 s.d 900 mm

Metallic Cable Tray

Straight

Light Duty Tray Model NRF ; Width ST50 s.d ST900 mm

Medium Duty Tray Model MRF ; Width ST50 s.d ST900 mm

Heavy Duty Tray Model HRF ; Width ST50 s.d ST900 mm

Fitting

Flat Bend All Model ; Type Fitting TFB ; Width 50 s.d 900 mm

Equal Tee All Model ; Type Fitting TET ; Width 50 s.d 900 mm

Cross Over All Model ; Type Fitting TCO ; Width 50 s.d 900 mm

Angle Risers

Inside Risers All Model ; Type Fitting TVI ; Width 50 s.d 900 mm

Outside Risers All Model ; Type Fitting TVO ; Width 50 s.d 900 mm

Sweep Type Risers

Inside Risers All Model ; Type Fitting TSI ; Width 50 s.d 900 mm

Outside Risers All Model ; Type Fitting TSO ; Width 50 s.d 900 mm

Concentric Reducer All Model ; Type Fitting TCR ; Width 50 s.d 900 mm

Reducers

Left Hand Reducer All Model ; Type Fitting TLR ; Width 100 s.d 900 mm

Right Hand Reducer All Model ; Type Fitting TRR ; Width 100 s.d 900 mm

Cable Tray Accessories All Model ; Type Fitting TSCP, THAC, TVAC, TFCP, TSD, TFD, TSFC, TCCU, TCC, TCC2, dan THDC ; Width 150 s.d 900 mm

87


Cable Trunking System

Floor Distribution System

Underfloor Ducting System Model UD ; Width DST50 s.d DST375 mm

Flushfloor Trunking System Model FT ; H 60 mm; Width DST 155 s.d DST 405 mm

Model FT ; H 28 mm; Width DST 100 s.d DST 300 mm

Cable Trunking

Light Duty Model NP ; Width TST 50 s.d TST 900 mm

Heavy Duty Cable Ducting System

Model HD ; Width TST 50 s.d TST 900 mm

Metal Framing Systems

Channel Model MC : 2/12, 2/12A, 3, 5, dan 5A

Cantilever Supports BMS 4 dan BMS 5

Concrete Inserts MC 5CI, MPVC41, MPVC End Cap, MPVC21, dan MPVC31

Fitting and Brackets

Flat Plate Fittings Model MF

Z Fittings Model MF

U Fittings Model MF

Clamps and Hangers

Pipe Clamps Type A Model MS AC

Saddle Clamps Model MS BC

Lighting Fittings Panjang 3 m

Wire Basket Tray Model WMB 30 ; Width 50 s.d 300 mm

Model WMB 60 ; Width 50 s.d 500 mm

PVC Corrosion Resistant System Model PVCP 60 dan 100 ; Width 100 s.d 500 mm

Model PVNP 60 dan 100 ; Width 100 s.d 500 mm

88


KEMAMPUAN USAHA PENUNJANG MIGAS PT. STEEL PIPE INDUSTRY OF INDONESIA

STATUS USAHA : Akta Pendirian Perusahaan No. 109 oleh Notaris Djojo Muljadi, SH tanggal 30 Januari 1971 di Jakarta Perusahaan Penanaman Modal Dalam Negeri (PMDN), berdasarkan Akte No.30 yang dikeluarkan oleh Notaris

Zuraida Zein SH pada Tahun 1992 Surat Ijin Usaha Industri No. 742/Sekr/ Sp.PMDN/1972 dikeluarkan oleh BKPM tanggal 10 November 1986 di Jakarta Surat Keterangan Terdaftar (SKT) Migas : No. 941/SKT/DU.5/DMT/2009 tanggal 16 oktober 2009 Surat Kemampuan Usaha Penunjang (SKUP) Migas No. 31641/19.07/SKUP/DMB/2010 tanggal 14 Desember 2010

SISTEM MANAJEMEN : Sistem Manajemen Mutu ISO 9001:2008 No. QEC21829 Badan Sertifikasi: SAI Global Certification Services Pty Ltd

Masa berlaku 29 Mei 2009 sampai dengan 17 Mei 2012 Sistem Manajemen Lingkungan : - Sistem Manajemen Keselamatan Kerja : -



PRODUK SERTIFIKAT PRODUK TKDN KAPASITAS

Pipa Baja Pipa ERW

Pipa Spiral DSAW

- Line Pipe Untuk Minyak dan Gas Bumi

Diameter : 3 – 8 Inch Panjang : 6 – 12 m Ketebalan : 5,49 – 8,18 mm Grade : B, X42, X52

(API 5 L)

Untuk saluran air (black steel & galvanized) Diameter : 1/2 – 8 Inch Panjang : 6 – 12 m Ketebalan : 2,65 – 8,18 mm

- Pipe Pile Untuk pancang

Diameter : 1/2 – 8 Inch Panjang : 6 – 12 m Ketebalan : 2,65 – 8,18 mm

- Pipe Line Untuk Minyak dan Gas Bumi

Diameter : 8 – 80 Inch Ketebalan : 6,35 – 25,4 mmPanjang : 6 – 12 m Grade : B ,X42, X52,

X65

API 5 L

SNI

SNI

SNI

ASTM A 252

ASTM A 53

API 5 L

API Spec. 5L No. 5L-0475 Oleh American Petroleum Institute (API), tanggal 8 Agustus 2008, berlaku sampai dengan 8 Pebruari 2012

SNI Nomor 07- 0537 - 1989 Oleh Kementerian Perindustrian, tanggal 24 Februari 2009, berlaku sampai dengan 23 Februari 2013



API Spec. 5L No. 5L-0313 Oleh American Petroleum Institute (API), tanggal 4 Nopember 2008, berlaku sampai dengan 4 Mei 2012

47,60 %

-

48,96 %

11,66 - 49,08 %

54.000 Ton/Tahun

120.000 Ton/Tahun

PERINGKAT

NILAI BMP

89


HASIL PRODUKSI JENIS RODUK SPESIFIKASI STANDAR PRODUK SERTIFIKAT


Coating Pipe External Coating

Internal Coating

- Pipe Line dan Pipe Pile Untuk pancang & saluran air

Diameter : 8 -120 Inch Ketebalan : 4 - 25.4 mm Panjang : 6 - 12 m Grade : 1,2,3

- Diameter 4 – 80 Inch - 3 Layer Polyethylene - Fusion Bonded Epoxy - Coaltar Epoxy - Wrapping Tape

- Diameter 4 – 80 Inch - Cement Lining - Coaltar Epoxy

ASTM A 252 BS 4360

AWW C200

CAN/CSA-Z245-21-02CAN/CSA-Z245-20-02

AWWA C210 AWWA C214

AWWA C205 AWWA C210

-

-

10,53 – 48,28 %

-

-

80.000 Ton/Tahun

Kantor Pusat : Pabrik / WorkshopUnit I :Jl. Rungkut Industri I No. 28-32 Surabaya 60292 Telp : (031) 8434865, 8439503 Fax : (031) 8431348, 8420723 Email : - Penanggung Jawab : Indra Tri T

Unit II :Jl. Rungkut Industri I No. 10 Surabaya 60290 Telp : (031) 8439555 - 8439666 Fax : (031) 8431348, 8420723

Email : - Penanggung Jawab : Nico Gunawan

Unit III : Jl. Mastrip No.860- Ds. Warugunung, Surabaya 60221 Telp : (031) 7661362 Fax : (031) 7661610 Email : [email protected] Jawab : Teguh Waskito

Unit IV : Jl. Kabupaten, Ds. Cangkring Kec Beji - Pasuruan Telp : (0343) 656523 - 25 Fax : (0343) 656526 - 658135

Email : [email protected] Jawab : Budi Dwi Santoso

Jl. Kalibutuh No. 189 – 191 Surabaya 60173 Telepon : (031) 5320921 – 5316921 - 5320320 Fax : (031) 5310712 - 5320290 E-Mail : [email protected] : www.spindo.comPenanggung Jawab : Soediarto Soerjoprahono (Direktur) Contact Person : Gong Handiman Utomo

Kantor Cabang : Jl. Pangeran Jayakarta No. 55 – Jakarta 10730 Telp : (021) 6012361 Fax : (021) 6240313 Email : - Penanggung Jawab : Ibnu Susanto (Direktur Utama) Contact Person : Hardiman Utomo

90


KEMAMPUAN USAHA PENUNJANG MIGAS PT SWARNA BAJAPACIFIC

STATUS USAHA : Akta Pendirian Perusahaan No. 59 oleh Notaris Misahardi Wilamarta, SH tanggal 13 Mei 2009 di Jakarta Perusahaan Penanaman Modal Dalam Negeri (PMDN) Surat Ijin Usaha Industri No. 240/T/INDUSTRI/1995 dikeluarkan oleh Menteri Negara Penggerak Dana

Investasi/Badan Koordinasi Penanaman Modal tanggal 8 Mei 1995 di Jakarta Surat Keterangan Terdaftar (SKT) Migas : No. 401/SKT/DU.08/DMT/2009 tanggal 28 April 2009 Surat Kemampuan Usaha Penunjang (SKUP) Migas No. 6768/19.07/SKUP/DMB/2011 tanggal 16 Maret 2011

SISTEM MANAJEMEN :Sistem Manajemen Mutu ISO 9001:2008 No. 18134/A/0001/UK/En Badan Sertifikasi: URS U K A S Quality Management Masa berlaku 24 Agustus 2009 sampai dengan 23 Agustus 2012Sistem Manajemen Lingkungan : Sistem Manajemen Keselamatan Kerja : -


HASIL PRODUKSI

JENIS PRODUK SPESIFIKASI STANDAR


Pipa Baja Pipa Spiral Pipe pile untuk pancang - Diameter : 8 - 120 Inch - Panjang : 6 - 45 m - Ketebalan : 6 - 20 mm

SNI Nomor : 07-0071-1987

ASTM A 252

JIS A 5525

SNI Nomor 0624/Bd/SNI-AS/IV/1995 Oleh Kepala Badan Penelitian Badan danPengembangan IndustriKementerianPerindustrian,tanggal 18 April 1995

32,95% 27.168 Ton/Tahun

Kantor Pusat: Kantor Pusat/ Pabrik/ Pemasaran : Jl. Pangeran Jayakarta 85 BO Jakarta - 10730 Telepon : (021) 628-1923,27

Jl. Raya Serang Km. 28 Kec. Balaraja Kab. Tangerang-Banten Telepon : (021) 5951178

Fax : (021) 628-1932 Fax : (021) 5951191 E-Mail : [email protected] E-Mail : - Website : http://www.swarnabaja.com Website : http://www.swarnabaja.com Contact Person : Jonet Darmono Contact Person : Dan Hartojo

PERINGKAT

NILAI BMP

91


KEMAMPUAN USAHA PENUNJANG MIGAS PT. TESSO TETRA CHEMIKA

STATUS USAHA : Akta Pendirian Perusahaan No. 31 oleh Ny Ratna Komala Komar, SH tanggal 6 Juli 1999 di Jakarta Surat Ijin Usaha Industri No. 503.15/042/BPPT/IUI-01/V/2010 oleh Bupati Bekasi Tanggal 21 Mei 2010 Surat Keterangan Terdaftar (SKT) Migas No. 838/SKT/DU/DMT/2008 Tanggal 8 September 2008 Surat Kemampuan Usaha Penunjang (SKUP) Migas No. 24417/19.07/SKUP/DMB/2010 tanggal 28 September 2010

SISTEM MANAJEMEN : Sistem Manajemen Mutu ISO 9001:2008 No. Cert.: AU QEC21861 tanggal 5 Januari 2010 oleh Badan Sertifikasi SAI

GLOBAL, berlaku sampai dengan 15 Februari 2013 Sistem Manajemen Lingkungan : - Sistem Manajemen Keselamatan Kerja : -



SERTIFIKAT PRODUK

TKDN ( % )

KAPASITAS (Ton/Tahun)

Chemical Drilling starch, fermentation resistance TESSODRIL DSF

High temperature fluid loss additive TESSODRIL FLA-HT

Shale stabilizer TESSODRIL SHI 65 K

HT Filtrate reducer TESSODRIL FCO-HT

HTHP Filtration control agent TESSODRIL BS FLO 70

Shale stabilizer, Fluid loss control TESSODRIL SHI 40

Appearance : Bubuk (Powder) Warna : Putih – kecoklatan pH 2 % larutan : 6.0 – 8.0 Bulk dens., gr/cm3 : 0.45 – 0.75 Kelarutan : Larut dalam air App. Viscosity, cP : 9 max API fluid loss, mL : 10 max

Appearance : Bubuk (Powder) Warna : Putih – kekuningan pH 2 % larutan : 6.5 – 8.5 Bulk dens., gr/cm3 : 0.60 – 0.80 Kelarutan : Larut dalam air API fluid loss, mL : max. 9 (DFCP-5)

Appearance : Bubuk (Powder) Warna : Coklat tua - hitam pH 2% larutan : 9.5 – 11.5 Bulk dens, gr/cm3 : 0.65 – 0.85 Kelarutan : Sebagian larut dalam air

Appearance : Bubuk (Powder) Warna : Coklat tua – hitam pH 2 % larutan : 3.0 – 7.0 Bulk dens., gr/cm3 : 0.60 – 0.80 Kelarutan : Tidak larut dalam air Appearance : Bubuk (Powder) Warna : Coklat tua - hitam pH 2 % larutan : 7.0 – 9.0 Bulk dens., gr/cm3 : 0.60 – 0.90 Kelarutan : Sebagian larut dalam air Appearance : Bubuk (Powder) Warna : Coklat tua - hitam pH 2 % larutan : 7.5 – 9.5 Bulk dens, gr/cm3 : 0.55 – 0.80 Kelarutan : Sebagian larut dalam air

89,54

84,79

34,68

68,09

52,86

47,44

1500

200

500

300

500

500

PERINGKAT

NILAI BMP

92


PRODUK SERTIFIKAT

PRODUK TKDN ( % )

KAPASITAS (Ton/Tahun)

Fluid loss reducer TESSPAC LV

Oil mud conditioner/thinner - TESSODRIL BS 1304 - TESSODRIL BS 1305 - TESSODRIL BS 1306 - TESSODRIL BS

1307

Defoamer - TESSODRIL BS 1903 - TESSODRIL BS 1904 - TESSODRIL BS 1907

TESSODRIL BS 1900

Appearance : Bubuk (Powder) Warna : Putih kekuningan pH 2 % larutan : 7.0 – 9.5 Bulk dens, gr/cm3 : 0.65 – 0.80 App viscosity, cP : 8.5 max API fluid loss, mL : 37 max Kelarutan : Larut dalam air

Appearance : Cairan jernih/keruh Warna : Kuning pH 1% larutan : 6.5 – 7.5 Density, gr/cm3 : 0.92 – 0.97 Viscosity, cP : < 300 Kelarutan : Tidak larut dalam air

Appearance : Emulsi Warna : Putih – kekuningan pH 2 % larutan : 5.5 – 8.0 Density., gr/cm3 : 0.90 – 1.00 Viscosity, cP : 400 - 1200 Kelarutan : Dalam air membentuk emulsi

28,62

87,87

9,40

500

1200

1200

Kantor dan Pabrik : Jl. Industri Selatan 2 Blok JJ Kav. 4 Jababeka Indusrial Estate Cikarang Bekasi 17550 Telepon : (021) 89830665 Fax : (021) 89830686 E-Mail : [email protected] & [email protected] : www.tesso.com Penanggung Jawab : Uce Niel Kurniandar (Direktur Utama) Contact Person : Dini Hadini

93


KEMAMPUAN USAHA PENUNJANG MIGAS PT TORISHIMA GUNA INDONESIA

STATUS USAHA : Akta Pendirian Perusahaan No. 35 oleh Notaris Thomas Gonawan, SH tanggal 27 Pebruari 1998 di Jakarta Perusahaan Penanaman Modal Asing (PMA), berdasarkan Surat Persetujuan Tetap Penanaman Modal Asing

No. 185/II/PMA/1997 dikeluarkan oleh BKPM tanggal 15 Oktober 1997 Surat Ijin Usaha Industri No. 221/M/SK/IMLDE/XII/90 tanggal 12 Desember 1990 di Jakarta Surat Kemampuan Usaha Penunjang (SKUP) Migas No. 25341/19.07/SKUP/DMB/2010 tanggal 6 Oktober 2010

SISTEM MANAJEMEN : Sistem Manajemen Mutu : ISO 9001:2008 No. Sertifikat QEC21852 Oleh SAI GLOBAL tgl. 1 Desember 1998

berlaku s.d. 8 May 2011. Sistem Manajemen Lingkungan : ISO 14001:2004 No. CEM20260 Oleh SAI GLOBAL tgl. 24 February 2010

berlaku s.d. 10 March 2013 Sistem Manajemen Keselamatan Kerja : -



PRODUK SERTIFIKAT


Pompa

a. Centrifugal

END SUCTION : Nozzle Diameter : up to 400 mm; Q : up to 2,000 m3/hr; H : up to 300 m.

JIS/ANSI/API - 51,94% 4000

Unit/tahun

MULTI STAGE :Nozzle Diameter : up to 350 mm; Q : up to 1,500 m3/hr; H : up to 2000 m.

JIS/ANSI/API - 47,95% 300

Unit/tahun

DOUBLE SUCTION (SPLIT CASE) :Nozzle Diameter : up to 800 mm; Q : up to 9,000 m3/hr; H : up to 220 m.

JIS/ANSI/API - 74,61% 100

Unit/tahun

b. Mixed Flow

VERTICAL TURBINE :Nozzle Diameter : up to 800 mm; Q : up to 6,000 m3/hr; H : up to 70 m.

JIS/ANSI/API - - 100Unit/tahun

Kantor Pusat/ Pabrik/ Pemasaran : Pulogadung Industrial Estate Jl. Rawa Sumur Timur No. 1 Jakarta Timur 13930 Telepon : (021) 460 3963 Fax : (021) 460 3937 E-Mail : [email protected] : http://www.torishimaguna.com Contact Person : Ridwan Setiadi

PERINGKAT

NILAI BMP

94


KEMAMPUAN USAHA PENUNJANG MIGAS PT TPCO PAN ASIA

STATUS USAHA : Akta Pendirian Perusahaan No. 12 oleh Notaris Sinawar Widjono, Oei, SH tanggal 8 April 2008 di Batam Perusahaan Penanaman Modal Asing (PMA), berdasarkan Surat Persetujuan No. 90/K1/I/PMA/2007 dikeluarkan

oleh Ketua BKPM tanggal 19 Desember 2007 di Jakarta Surat Ijin Usaha Industri No. 01.KH/2/I/PMA/Industri/2010 oleh Badan Pengusahaan Kawasan Perdagangan dan

Pelabuhan Bebas Batam tanggal 23 April 2010 di Batam Surat Keterangan Terdaftar (SKT) Migas No.0016/SKT-03/DMT/2011 oleh Direktorat Jenderal Minyak dan Gas

Bumi tanggal 02 Maret 2011 di Jakarta Surat Kemampuan Usaha Penunjang (SKUP) Migas No. 5771/19.07/SKUP/DMB/2011 tanggal 22 Maret 2011


- ISO 9001:2008 No. Registrasi 1210, diterbitkan oleh American Petroleum Institute berlaku sampai dengan 29 November 2013

- API Spesification Q1, No. Registrasi Q1-1005 diterbitkan oleh American Petroleum Institute berlaku sampai dengan 29 November 2013

- ISO/TS 29001 No. Registrasi TS-0886 diterbitkan oleh American Petroleum Institute berlaku sampai dengan 29 November 2013

Sistem Manajemen Lingkungan : - Sistem Manajemen Keselamatan Kerja : -




Casing,Tubing & Accessories

Casing & Tubing API Steel Grades

- Group 1

- Group 2

- Group 3

- Group 4

- PSL Special Grades - High Collapse

- Steam Injection Service

- Perforating Gun Tube

- High Collapse + Sour Service

- Deep Well Service API Connections

Casing Size : 4 1/2” – 13 3/8” Tubing Size : 2 3/8” – 4 1/2” Range : R1, R2 dan R3

H40, J55,K55,N80.1, N80.Q, R95

M65, L80.1, L80 13Cr, C90.1, C95, T95.1, C110

P110

Q125

PSL 1,2 and 3

TP80T, TP110T(T), TP125T(T), TP130T(T) TP90H, TP100H, TP110H TP155P TP80S(S), TP90S(S), TP95S(S), TP110S(S), TP110TS(S) 3Cr&13Cr TP110-3Cr, TP80-13Cr, TP110 Sup 13Cr. TP140V, TP155V CRA Material EUE8RD, NUE, Mod EUE, STC, LTC,BTC, APIModified

API 5CT API 5B

API 5CT & TPCO (Mill Proprietary)

API 5B

API 5CT No. Lisensi 5CT-1224, diterbitkan oleh American Petroleum Institute, berlaku sampai dengan 29 November 2013

Carbon Steel Casing High grade :

- API Connection : 26,21 %

- Premium Connection : 25,95 %

Low grade : - API

Connection : 16,42 %


Carbon Steel Tubing High grade :

- API Connection : 26,20 %


Low grade : - API

Connection : 16,56 % - Premium

Connection : 16,40 %

120.000 Ton/Tahun

PERINGKAT

NILAI BMP -

95




Premium Connections

Accessories Coupling Pup Joint Cross Over

TP-G2 TP-G3 TP-CQ TP-CQ(EX) TP-FJ TP-NF TP-JC TP-TS TP-QR TP-HT TP-LC TP-BM TP-PEAK

Size, Grades and connection as mention above

TPCOProprietary Grade API 5B

API 5CT API 5B TPCOProprietary

120,000 Ton/Tahun

Kantor Representative : Kantor Pusat/Pabrik :Jl. Patimura, Kel. Kabil, Kec. Nongsa, BatamTelepon : (0778) 711199 Fax : (0778) 711399Website : www.tpcopanasia.com Contact Person : Ow Choong Hon (Direktur)

Sahid Office Boutique, Unit A Lt. 1 Jl. Jend. Sudirman Kav. 86 Telepon : (021) 57851867 Fax : (021) 57851868 E-Mail : [email protected] Person : Galih Indrasna

96


KEMAMPUAN USAHA PENUNJANG MIGAS PT TRAFOINDO PRIMA PERKASA

STATUS USAHA : Akta Pendirian Perusahaan No. 2 oleh Notaris Trisnawati Mulia, SH tanggal 2 November 2000 di Jakarta Perusahaan Penanaman Modal Dalam Negeri (PMDN) Surat Ijin Tetap Usaha Industri No. 110/M/SK/IMLDE/VI/90 oleh Menteri Perindustrian Republik Indonesia tanggal 27

Juni 1990 di Jakarta Surat Keterangan Terdaftar (SKT) Migas No. 683/SKT/DU.6/DMT/2009 tanggal 15 Juli 2009 Surat Kemampuan Usaha Penunjang (SKUP) Migas No. 20872/19.07/SKUP/DMB/2010 tanggal 19 Agustus 2010

SISTEM MANAJEMEN : Sistem Manajemen Mutu ISO 9001:2008 No. QEC22216 tanggal 23 Februari 2009 oleh badan sertifikasi SAI Global

Certification Services berlaku sampai dengan 14 Januari 2012 di Jakarta Sistem Manajemen Lingkungan AS/NZS ISO 14001:2004 No. CEM20294 tanggal 30 Maret 2009 oleh badan sertifikasi

SAI Global Certification Services berlaku sampai dengan 6 April 2012 Sistem Manajemen Keselamatan Kerja OHSAS 18001:2007 No.OHS20195 tanggal 14 Juli 2006 oleh badan sertifikasi

SAI Global berlaku sampai dengan 17 Maret 2012




Transformator Tranformator Tenaga dan Distribusi (Distribution & Power Transformer) :

LMK No. Sertifikat 97.065.A/SP/10 Tanggal 19 Maret 2010 oleh Jasa Sertifikasi PT. PLN (Persero) berlaku sampai dengan tanggal 31 Maret 2011

Lampiran 1

a. Jenis Minyak (oil immerssed)


IEC 76 SPLN 50 ANSI-C 571200

NEMA ST 20

3.000 MVA/Tahun

b. Jenis Kering (dry type)


IEC 726 NEMA ST 20

Tranformator Instrument CT/VT (Instrument Transformer CT/VT)

a. Transformator Instrumen Arus (CurrentTransformer/CT)

Max : 1.000 A IEC 44-1 SPLN 76

24.000 Unit/Tahun

b. Transformator Instrumen Tegangan (Voltage Transformer/VT)

Max : 24 KV IEC 44-2

KEMAMPUAN JASA DALAM NEGERI:


Jasa Pengoperasian dan Pemeliharaan

Repair dan maintenance transformer

Semua merek transformator

PERINGKAT

NILAI BMP

97

Lampiran 1

JENIS PRODUK SPESIFIKASI STANDAR NILAI TKDN (%) No TANDA SAH

Transformator Distribusi 3 Fase 100 kVA, 20 kV – 400 V, 50 Hz, YNynO, Cu-Cu

SPLN 50 : 1997 43,51 557/SJ.IND.7/TKDN/I10 15 Januari 2010

160 kVA, 20 kV – 400 V, 50 Hz, YNynO, Cu-Cu

43,58

200 kVA, 20 kV – 400 V, 50 Hz, YNynO, Cu-Cu

42,94

Transformator Distribusi 1 Fase 50 kVA, 11,547 kV – 231/462 V, 50 Hz, lio

SPLN 95 : 1994 46,88 558/SJ.IND.7/TKDN/I10 15 Januari 2010

Transformator Distribusi 3 Fase 25 kVA, 20 kV – 400 V, 50 Hz, Yzn5, Cu-Cu

SPLN 50 : 1997 42,70 742/SJ.IND.7/TKDN/I10 20 April 2010

50 kVA, 20 kV – 400 V, 50 Hz, Yzn5, Cu-Cu

42,74

100 kVA, 20 kV – 400 V, 50 Hz, Yzn5, Cu-Cu

41,02

160 kVA, 20 kV – 400 V, 50 Hz, Yzn5, Al-Al

47,05

200 kVA, 20 kV – 400 V, 50 Hz, Dyn5, Al-Al

44,64


42,87


41,81


42,78


43,38


40,51

Transformator Distribusi 3 Fase 25 kVA, 20 kV – 400 V, Yzn-5 SPLN D3.002-1 : 2007

46,07 742/SJ.IND.7/TKDN/I10 20 April 2010 50 kVA, 20 kV – 400 V, Yzn-5 45,33

100 kVA, 20 kV – 400 V, Yzn-5 46,30 160 kVA, 20 kV – 400 V, Yzn-5 45,83 200 kVA, 20 kV – 400 V, Dyn-5 30,34 250 kVA, 20 kV – 400 V, Dyn-5 28,36 315 kVA, 20 kV – 400 V, Dyn-5 29,59 400 kVA, 20 kV – 400 V, Dyn-5 28,35 630 kVA, 20 kV – 400 V, Dyn-5 32,75

1000 kVA, 20 kV – 400 V, Dyn-5 37,90

Kantor Pusat/ Pemasaran : Jl. Hayam Wuruk No. 4 FX, Jakarta Pusat Telepon : (021) 3850703 Faksimili : (021) 3850702 E-Mail : [email protected] Web: www.trafoindonesia.com Penanggung Jawab : Ir. Karnadi Kuistono (Direktur Utama) Contact Person : Perry Sihotang (Staff HRD)

Pabrik: Jl. Siliwangi, Kel. Alam Jaya, Kec. Jatiuwung, Tangerang Telp. (021) 5903801, Fax. (021) 5900616, Email: [email protected] Jawab : Ir. Purno Suryawan

98


KEMAMPUAN USAHA PENUNJANG MIGAS PT. TRIMULYA GEMILANG

STATUS USAHA : Akte Pendirian Perusahaan, Notaris Darmawan Tjoa, S.H.,S.E. No. 2, tanggal 06 Nopember 2002, di Jakarta. Perusahaan Perseroan Terbatas, berdasarkan Keputusan Menteri Kehakiman dan Hak Asasi Manusia Republik

Indonesia No. C-09475 HT.01.01.TH.2003 Tanggal 30 April 2003 tentang Pengesahan Akta Pendirian Perseroan Terbatas.

Surat Keterangan Terdaftar (SKT) Migas : No. 1169/SKT/Daf/DMT/2008 tanggal 05 Desember 2010 Surat Kemampuan Usaha Penunjang (SKUP) Migas No. 32112/19.07/SKUP/DMB/2010 tanggal 17 Desember 2010

SISTEM MANAJEMEN : Sistem Manajemen Mutu : - Sistem Manajemen Lingkungan : - Sistem Manajemen Keselamatan Kerja : -


PRODUKSI JENIS PRODUK SPESIFIKASI STANDAR PRODUK SERTIFIKAT PRODUK TKDN (%) KAPASITAS

Cathodic Protection

Aluminium Sacrificial Anode

Platform and Structural Anodes Marine Pilling Anodes Hull Anodes –Welded Hull Anodes – Bolted Bracelet Anodes Client Spec

MIL-A-18001 DNV-RP-B401 DNV-RP-F103 ISO15589-2 NACE RP0387 NACE RP0492 NACE TM0910 BS 7361 Pt 1 NACE RP0775

150 Ton/Bln

Zinc Sacrificial Anode Hull Anodes –Welded Hull Anodes – Bolted Client Spec

150 Ton/Bln

Anodeclamp Anode Connection System 300 Unit/Bln

Kantor Pusat : Pabrik : Crown Palace Blok C25 Kawasan Industri Jababeka 3, Jalan Prof. Dr. Soepomo SH No. 231 Cluster New TOB Blok B2E Jakarta 12870 Cikarang - Bekasi Telepon : (021) 83787466 - 68 Telepon : (021) 89842685 Fax : (021) 83787469 Fax : (021) 89842684 Email : - [email protected] Penanggung Jawab : Sarbini - [email protected] Contact Person : Sarbini Website : www.trimulyagemilang.com Email : [email protected] Penanggung Jawab : Wawan Junaedi Contact Person : Irwan Sutarya

PERINGKAT

NILAI BMP

99

100

101

Untuk Informasi lebih lanjutAnda dapat menghubungi :

Direktorat Pembinaan Program MigasGedung Dirjen Migas (Plaza Centris) Lt. 6

Jl. HR. Rasuna Said Kav. B-5Jakarta - Indonesia

Telp. 021-5268910 (Hunting) ext. 191, 172, 177Fax. 021-5268980

www.migas.esdm.co.id

Documents

indeks apdn addendum - SKKMIGASskkmigas.go.id/images/upload/file/58f1dec0965b.pdf · ... usaha hulu migas yang berisi Daftar Barang Diwajibkan ... migas dan melampirkan dokumen pendukung,