In-Duct High Pressure Nozzle HumidificationSystem - HP HVAC Series

Submittal Drawings

2560711-C l 13 SEP 2017

Date:

Job Name:

Contractor:

Contractor or Order No.:

Engineer:

Agent:

Agent P.O. No.:

Date Ordered:

Date Required:

Nortec Humidity (USA) Inc.2700 90th Street, Sturtevant, WI. 53177 Tel: 262.884.4669 E-mail: nortec@humidity.com

Nortec Humidity (Canada) Ltd.2740 Fenton Road, Ottawa, Ontario K1T3T7 Tel: 613.822.0335 Fax: 613.822.7964

1-866-NORTEC-1

HP Outlet(Use Supplied Hose)

Water Inlet (RG 3/4")(½" or 3/4" Barb FittingProvided)

51.2 in.1301 mm

19.7 in.500 mm

26.0 in.660 mm

HP Series

HP Pump Module - Dimensional Drawing

HP 100, 200VFD, 300, 500, 500VFD, 800, 800VFD, 1300VFD

PN PUMP August 31, 2017

HP Outlet(Use Supplied HP Hose)

Drain Connector (Ø 1.25 in. / 32 mm)Min. Diameter of Drain Hose: Ø 1.60 in. / 40 mm

Water Inlet (RG 3/4")(½" or 3/4" Barb Fitting Provided)

27.6 in.700 mm

33.9 in.860 mm

63.1 in.1602 mm

HP Series

HP RO 100, 200 VFD, 300, 500, 500 VFD

PN PUMP August 31, 2017

HP Pump Module - Dimensional Drawing

Note: See separate dimensional drawing for RO tank

Drain Connector (O 1.25 in. / 32 mm)Min. Diameter of Drain Hose: O 1.60 in / 40 mm

HP Outlet(Use Supplied HP Hose)

RO Bypass(Return to Tank)

RO Supply(From Tank)

RO Supply(To Tank)

55.1 in.1400 mm

27.6 in.700 mm

63.0 in.1601 mm

HP Series

HP RO 800 and HP RO 800 VFD

PN PUMP August 31, 2017

HP Pump Module - Dimensional Drawing

High Pressure Hose(By Nortec)

Wall Penetrations to Nozzle Manifold

Rubber Grommet(By Nortec)

Drain Connection

High Pressure WaterFrom Pump (3/8" or 1/4")

2.0 in.50 mm

1.6 in.40 mm

2.0 in.50 mm

9.1 in.230 mm

3.9 in.100 mm

3.1 in.80 mm

8.3 in.210 mm

3.4 in.86 mm

1.4 in.35 mm

R 0.2 in.4 mm

HP Series

Valve Assembly - 7 Stage (3 Staging Valves + 1 Drain)

PN 2582144 August 31, 2017

Drain Connection

High Pressure Hose (By Nortec)

High Pressure WaterFrom Pump (3/8" or 1/4")

2.0 in.50 mm

2.0 in.50 mm

2.0 in.50 mm

2.0 in.50 mm

9.1 in.230 mm9.8 in.250 mm

11.6 in.296 mm

3.1 in.80 mm

3.9 in.100 mm

4.7 in.119 mm

2.0 in.50 mm

1.4 in.35 mm

Ø 0.2 in.6 mm

HP Series

Valve Assembly - 15 Stage (4 Staging Valves + 1 Drain)

PN 2582146 August 31, 2017

Construction:

Inner Tube Polyester Elastomer

Reinforcement Tensile carbon steel wire, Brass plated

Cover Polyurethane

Temperature Range: -40°F to 208°F

-40°C to 98°C

Specifications

Hose ID: 1/16in (1.6mm) 1/8in (3.4mm) 1/4in (6.6mm) 3/8in (9.8mm)

Max Operating Pressure:

PSI 1,440 5,100 4,700 3,600

Bar 100 350 325 250

Min. Burst Pressure @ 20°C (68°F)

PSI 23.2 20.4 18.8 14.4

Bar 1.6 1.4 1.3 1

Min Bend Radius: 1.12in (30mm) 1.38in (35mm) 2.17in (55mm) 2.76in (70mm)

Properties:

•

• Excellent flexibility and flex fatigue

• Excellent resistance to chemicals and solvents

• UV and Ozone resistant

• Suitable for water based hydraulics up to 158°F (70°C)

• Excellent abrasion resistance• Low volumetric expansion for quick hydraulic response time• Static free - 100% electrical conductivity• Exceeds SAE 100 R1, R2, and DIN requirements• Min. flow resistance• Low weight per meter

Note: Only use Nortec supplied hose fittings.

Safety thermoplastic hose to work at higher operating pressures

HP Series

High Pressure Flex Hose

PN 2300058, 2300059, 2300060 August 17, 2017

Nozzle

lbs/hr 5.5 9.9 13.2

l/hr 2.5 4.5 6

Capacity

lbs/hr 3.74 - 5.5 7.7 - 11 9.9 - 14.3

l/hr 1.7 - 2.5 3.5-5.0 4.5-6.5

Working Pressure

PSI 507.63 - 1015.26 507.63 - 1015.26 507.63 - 1015.26

Bar 35-70 35-70 35-70

Material 316 Stainless Steel 316 Stainless Steel 316 Stainless Steel

Thread 12/24 UNC/2A 12/24 UNC/2A 12/24 UNC/2A

Non-Drip Valve Standard Standard Standard

Filter Optional Optional Optional

Requirements for Conductivity μS/cm* 5 < EC < 1000 5 < EC < 1000 5 < EC < 1000

Specifications

*Lower conductivity results in longer service life and a lower risk for blockage

Nortec HP nozzles are specifically designed to atomize water without the use of impingement

pins or compressed air. Water under pressure is sprayed though an orifice which produces

droplets between 5 and 10 microns in size. The nozzles are constructed from 316SS to ensure

durability and long life. The nozzles also have a built-in anti-drip check valve to prevent

dripping after the system has shut down.

Nozzle

O-Ring

Anti-Drip Valve Spring

Anti-Drip Valve Plug

Nozzle Body

O-Ring

HP Series

HP Nozzles

PN 103160000, 103150000, 103180000 Aug. 31, 2017

Mounting Bracket Set, Top/Bottom(Includes Hardware)

Mounting Rod(Includes Hardware)

Support Bracket Clamp, Narrow(Includes Rubber Insert)

Support Bracket Clamp, Broad(Includes Rubber Insert)

Nozzle Manifold Line(Number of Lines Based on Capacity)

HP Hose ConnectionFrom Valve Block

Rubber Insert

HP Series

HP Typical Manifold Installation

August 31, 2017

H = Height

0.4 in.10 mm

2.0 in.50 mm

2.0 in.50 mm

0.2 in.5 mm

0.9 in.22 mm

Description Height (in) Height (mm)

Mounting Rod, 0.5m 19.7 500

Mounting Rod, 1.0m 39.4 1000

HP Series

HP Nozzle Manifold - Mounting Rod

PN 500040500, 500040505 August 31, 2017

1/4" Manifold Base Connection

1/4" HP Hose Connection

L = Length 1.3 in.33 mm

7.9 in.200 mm

1.2 in.30 mm

Description Length (in) Length (mm) Nozzle Qty.

Extension Bracket 562 24.0 610 3

Extension Bracket 762 31.9 810 4

Extension Bracket 962 40.0 1015 5

Extension Bracket 1162 48.0 1220 6

HP Series

HP Nozzle Manifold - Extension Assembly

PN 500040050, 500040055, 500040060, 500040065 August 31, 2017

HP Series

HP Nozzle Manifold - Base Assembly

PN 500040075, 500040080, 500040085, 500040090 August 31, 2017

Description Length (in) Length (mm) Nozzle Qty.

Base Bracket 420 19.5 495 3

Base Bracket 620 25.4 645 4

Base Bracket 820 33.1 840 5

Base Bracket 1020 41.1 1045 6

1/4" HP Hose Connection

1.3 in.33 mm

L = Length

1.2 in.30 mm

0.5 in.12 mm

7.9 in.200 mm

Top/Bottom Brackets

Note: Kit also includes 2x Adhesive Pads for Bottom Bracket, 2x Bolts M2x25, 2x Washers, 4x Self

Tapping Screws for Top Bracket

2.0 in.50 mm

3.0 in.75 mm

3.9 in.100 mm

Ø 0.3 in.7 mm

1.0 in.26 mm

3.0 in.76 mm

10.4 in.264 mm

10.0 in.254 mm

7.4 in.187 mm

6.5 in.165 mm

7.1 in.180 mm

HP Series

HP Slave Control Panel Dimensional Drawing

PN 2582135, 2582136, 2582137 August 31, 2017

RO Bypass(Return to Tank)

RO Supply(To Tank)

RO Supply (To Pump)

RO Tank Drain

31.1 in.790 mm

55.3 in.1405 mm

49.2 in.1250 mm

33.9 in.860 mm

37.8 in.961 mm

52.2 in.1326 mm

33.9 in.860 mm

27.6 in.700 mm

HP Series

HP RO Tank 500L (RTN 500)

PN 150515000 August 31, 2017