3
I.I:B...r.II"... -------- - - -- - - - --- - - -- ------ [1] [2] EC- TYPE EXAMINATION CERTIFICA TE Equipment or Protective Systems intended for use in Potentially Explosive Atmospheres Directive 94/9/EC [3] Certificate Number: SP08ATEX3925 [4] [5] [6] [7] Equipment: Industrial vacuum c1eanertype I940T ATEX Applicant (manufacturer): Pullman Ermator AB Address: Industrivägen 10, SE-777 34 Smedjebacken, Sweden This equipment or protective system and any acceptable variation thereto is specified in the schedule to this certificate and the documents therein referred to. [8] SP, Notified Body No. 0402 in accordancewith Artic1e9 of the CouncilDirective94/9/ECof 23 March 1994, certifies that this equipment or protective system has been found to comply with the Essential Health and Safety Requirements relating to the design and construction of equipment and protective systems intended for use in potentially explosive atmospheres, given in Annex II to the Directive. The examination and test results are recorded in a confidential report No. P803505:A. [9] Compliance with the Essentiai Health and Safety Requirements has been assured by compliance with: EN 13463-1:2001 (SS-EN 13463-1 ed 1) [10] If the sign "X" is placed after the certificate number, it indicates that the equipment or protective system is subject to special conditions for safe use specified in the schedule to this certificate. [11] This EC Type examination certificate relates only to the design, examination and tests of the specified equipment or protective system in accordance to the Directive 94/9/EC. Further requirements of the Directive apply to the manufacturing process and supply of this equipment or protective system. This certificate does not cover these requirements. [12] The marking of the equipment or protective system shall inc1udethe following: Bor E~ ord October 2008 SP . fh~ical Research Institute of Sweden Ce l lcation ?~~ Peter Brerner CertificationOfficer SP ref.: 507901 Certificate issued by Notified Body No. 0402 SP Technical Research Institute of Sweden page 1(3) Postal address Phone! Fax Reg.number SP +46105165000 556464-6874 Box857 +4633135502 SE-50115 Borås SWEDEN E-mail! Internet [email protected] www.sp.se Swedish Notified Bodies are appointedby SWEDAC,the SwedishBoardfor Accred~ationand ConformityAssessment,underthe terms of Swedishlegislation. This certificatemay not be reproducedotherthan in full, exceptwith the prior writtenapproval bySP.

I.I:Br.II...990918 980918 980918 paQe 2(3) E-mail /tnternet [email protected] Swedish Notified Bodies are appointed by SWEDAC, the Swedish Board for Accred~ation and Conformity Assessment,

  • Upload
    others

  • View
    1

  • Download
    0

Embed Size (px)

Citation preview

Page 1: I.I:Br.II...990918 980918 980918 paQe 2(3) E-mail /tnternet info@so.se Swedish Notified Bodies are appointed by SWEDAC, the Swedish Board for Accred~ation and Conformity Assessment,

I.I:B...r.II"...--------- - - - - - - - -- - --- ------

[1]

[2]

EC- TYPE EXAMINATION CERTIFICA TE

Equipment or Protective Systems intended for use inPotentially Explosive Atmospheres

Directive 94/9/EC

[3] Certificate Number:

SP08ATEX3925[4]

[5]

[6]

[7]

Equipment: Industrial vacuum c1eanertype I940T ATEX

Applicant (manufacturer): Pullman Ermator AB

Address: Industrivägen 10, SE-777 34 Smedjebacken, Sweden

This equipment or protective system and any acceptable variation thereto is specified in theschedule to this certificate and the documents therein referred to.

[8] SP,NotifiedBodyNo. 0402 in accordancewith Artic1e9 of the CouncilDirective94/9/ECof 23March 1994, certifies that this equipment or protective system has been found to comply with theEssential Health and Safety Requirements relating to the design and construction of equipment andprotective systems intended for use in potentially explosive atmospheres, given in Annex II to theDirective.

The examination and test results are recorded in a confidential report No. P803505:A.

[9] Compliance with the Essentiai Health and Safety Requirements has been assured by compliancewith:

EN 13463-1:2001 (SS-EN 13463-1 ed 1)

[10] If the sign "X" is placed after the certificate number, it indicates that the equipment or protectivesystem is subject to special conditions for safe use specified in the schedule to this certificate.

[11] This EC Type examination certificate relates only to the design, examination and tests of thespecified equipment or protective system in accordance to the Directive 94/9/EC. Furtherrequirements of the Directive apply to the manufacturing process and supply of this equipment orprotective system. This certificate does not cover these requirements.

[12] The marking of the equipment or protective system shall inc1udethe following:

Bor

E~

ordOctober 2008

SP . fh~ical Research Institute of SwedenCe l lcation

?~~Peter BrernerCertificationOfficer SP ref.: 507901

Certificate issued by Notified Body No. 0402SP Technical Research Institute of Sweden

page 1(3)

Postaladdress Phone!Fax Reg.numberSP +46105165000 556464-6874Box857 +4633135502SE-50115 BoråsSWEDEN

[email protected]

SwedishNotifiedBodiesare appointedby SWEDAC,the SwedishBoardfor Accred~ationandConformityAssessment,underthe termsof Swedishlegislation.This certificatemay notbe reproducedotherthan in full, exceptwith the priorwrittenapprovalbySP.

Page 2: I.I:Br.II...990918 980918 980918 paQe 2(3) E-mail /tnternet info@so.se Swedish Notified Bodies are appointed by SWEDAC, the Swedish Board for Accred~ation and Conformity Assessment,

[13] Schedule

[14] EC-TYPE EXAMINATION CERTIFICATE No. SP08ATEX3925

[15] Description of equipment

The vacuum c1eaneris supplied by compressed air. It comprises mainly of a floor mouthpiece, hose,container and an ejector. The parts are mounted on a chassis with dissipative wheels. For situationswhere earthing can not be guaranteed by the dissipative wheels and earthed dissipative floors, the c1eaneris equipped with an earth connection facility indended to be connected to earth, to conduct awayelectrostatic charges

The c1eaneris designed for use in explosive dust atmospheres zon 21. The mouthpiece inlet, and theinterior of the hose and the container, is designed for zone 20. The c1eaneris not intended to be used forsuc1dngflammab1eliquids or other liquids.

Data

Tamb:-20°C to +60 °CThis temperature range applies also for the compressed air, supplying the c1eaner.

[16] Report No.

P803505:A

[17] Special conditions for safe use

None

[18] Essentiai health and safety requirements

Additional requirements not applicable.

[19] Drawings and documents

Description

Bruksanvisning för I940T ATEX1712. Strukturregister

JB3000T SugaggregatL1000 EjektorSlangnippelDistanslockTopplockMotorhus

Schedule to Certificate No. SP 08ATEX3925

SP Technical Research Institute of Sweden

Noro

~

Postaladdress Phone/ Fax Reg.numberSP +46105165000 556464-6874Box857 +4633 135502SE-50115BoråsSWEDEN

Pages159

111111

Date

081006

2008 w072008 w382006 w39990918980918980918

paQe2(3)

E-mail/ [email protected]

SwedishNotifiedBodiesareappointedby SWEDAC,the SwedishBoardfor Accred~ationandConformityAssessment,under the terms of Swedishlegisiation.This certificatemay notbe reproducedotherthan in full, exceptwith the priorwrittenapprovalbySP.

Number Issue

Rev 9-

1201024 0011349002 -

134911O 001751205751206760206

Page 3: I.I:Br.II...990918 980918 980918 paQe 2(3) E-mail /tnternet info@so.se Swedish Notified Bodies are appointed by SWEDAC, the Swedish Board for Accred~ation and Conformity Assessment,

Schedule to Certificate No. SP 08ATEX3925

SP Technical Research Institute of Swedenpage 3(3)

NoM

B;

Postaladdress Phone/ Fax Reg.numberSP +46105165000 556464-6874Box857 +4633 1355 02SE.50115 BoråsSWEDEN

E-mail/ [email protected]

SwedishNotilied Bodiesare appointedby SWEDAC,the SwedishBoardlor AccreditationandConiormityAssessment,underthe terms01Swedishlegisiation.This certilicatemay not be reproducedother than in lull, except with the priorwrittenapprovalbySP.

Bottenplatta 801109UH 2000094 - 000415 1Stödring VLT940 980205 - 980406 1Distansskruv 931210 - 981214 1Kåpisolering 350-7 9708071A - 030416 1Serienummerdeka1 120717 00 2007 w27 1

Dammfilter ATEX montage 200700092 - 2008w37 1Filterkorg23B 771101 - 980907 1Filterring23B 890201 - 980907 1Dammfilter ATEX 200600707 00 2006 w38 1Tätningsring 1351007 00 2007 w30 1Kopparbleck 200800135 001 2008 w14 1

Tank inkl stålscoop 200600684 00 2008 w14 1Slangintag 200600682 00 2006 w38 1C07P 2004037/AB - 051003 1Rörböj 2" 200800136 00 2008 w14 1Tvåhålstank N55-2 2000195A - 031106 1Clamp for 406B 930515/B - 050628 1Pwnppackning 921008 - 990830 1Förstärkningsplatta 200600003 1 2005 wO1 1

Vagn ESD 1223024 01 2007 w47 1Chassi 406B 2001026 - 010217 1Chassi406B 2001027 - 010217 1Jordanvisning självhäftande 9657 001 2007 w27 1Dekal, maskinen skall anslutas till j ord 200800263 001 2008 w41 1

Handle CO12 8303061A - 050513 1Verktygskorg 1342005 01 2007w30 1

W4 expanderring 1324017 00 2008 w06 1W5 expandermutter (M45) 1324019 00 2006 w06 1W6 expanderhylsa 1324020 00 2008 w06 1

ESD sugslang med hyls 200800137 00 2008 w15 1A37B ändhylsa (38mm) 1334008 02 070820 1Insatsrör 200800139 00 2008 w15 1

Golvmunstycke ATEX, komplett 200800035 00 2008 w05 1Golvmunstycke ATEX, svets 200800032 00 2008 w05 1Frontplåt 200800033 02 080922 1Bakplåt 200800034 02 080922 1Topplåt 200800036 02 080922 1Spännare 200800037 00 2008 w05 1Rör 200800038 02 080922 1Sida 200800040 00 2008 w50 1Spännare, svets 200800041 00 2008 w05 1Hjul till ESD450 2001070 - 010503 1