Igniter Solutions

For more than a century, the Coen® and Hamworthy Combustion® brands have stood for

the most advanced science and technology in oil and gas combustion. Today, Coen and

Hamworthy Combustion are part of John Zink Hamworthy Combustion, where we combine

our technological expertise, vast resources and industry experience to provide the world’s

most advanced selection of innovative combustion solutions. These solutions include proven

igniter systems for virtually any combustion application, all designed to deliver effective,

efficient performance while meeting your requirements for reliable burner light-off, boiler

warm-up and low opacity.

Proven Igniter Solutions from John Zink Hamworthy Combustion.

Our FyrBolt™ gas and oil igniters deliver reliable burner light-off and excellent flame stability with minimal

maintenance. FyrBolt igniters have no moving parts to wear out and are equipped with fixed-position, high-energy or

high-tension spark systems.

FyrBolt comes in several sizes and capacities to meet your ignition needs. FyrBolt igniters provide a large ignition flame that

will reliably ignite your main fuel and the flame is easily detected with our optical flame scanners or flame ionization rod.

FyrBolt at a Glance

+ Capacity range: 0.35 to 35 MMBtu/hr (0.1 to 10 MW)

+ NFPA Class 1, 2 or 3 operation

+ Non-retractable, low maintenance

FyrBolt: Reliable Ignition for any Boiler, any Burner, any Fuel

FyrBolt Gas Igniter

+ High-energy or high-tension sparks system

+ Reliable light-off and flame monitoring

+ Designed to minimize airflow obstructions in the burner

Oil fired FyrStorm igniters

FyrStorm: Reliable Burner Ignition and Boiler Warm Up

FyrStorm™ oil and gas ignition and warm-up systems provide superior combustion performance, easy installation and low

maintenance. The igniters may be installed as complete assemblies for new burners, or as retrofit components for upgrading

existing igniter equipment. Designed to produce a clean burning flame, opacity with the FyrStorm smokeless oil igniter is

typically less than 10% even on a cold boiler startup.

The igniter assembly is designed to minimize airflow obstructions in the burner and can be located either in the air annulus zone

or the center of the burner. The igniter can be used for routine light-off of main burners and as a boiler warm-up gun. It is often

configured as a Class 1 igniter, with the additional functions of stabilizing the main burner flame and extending the turndown

range of the main burner.

Retractable or Fixed OptionsFyrStorm igniters are available as either a retractable design, which provides longer life for the firing-end components, or as

non-retractable igniters, which have fewer moving parts.

Flexible Components OptionFyrStorm igniters are available with flexible components to permit operation in tangentially fired boilers by fitting into the

existing tilting buckets without modification.

FyrStorm at a Glance

+ Capacity range: 10 to 200 MMBtu/hr (3 to 60 MW)

+ Wide turndown ratio

+ Fires a variety of gas and liquid fuels

+ Direct electric spark ignition of heavy oil

+ Minimal cooling air when out of service

+ Easy maintenance

+ Bearings with graphite packing eliminate binding

+ Adjustable insertion depth

+ Flame detection by flame rod or optical scanner

FyrStorm Warm-up Gun

FyrBall™ gas or oil igniter systems are cost-effective, high-performance upgrades to the original oil-fired sidewall igniter

equipment on tangentially fired boilers. Using our proprietary smokeless technology, FyrBall igniter systems can help you

overcome problems such as high opacity, soot and carbon buildup in the horn and fouled flame rods.

FyrBall produces the optimum fuel injection pattern to match the aerodynamics of the igniter horn, delivering a clean flame

that burns all of the fuel and minimizes the production of soot. Additional benefits include improved reliability of the flame

detection and spark equipment, reduced opacity and reduction of unburned fuel carryover into the backpass of the furnace.

FyrBall: Reliable Sidewall Ignition for Tangentially Fired Boilers

FyrBall at a Glance

+ Capacity range: 2 to 20 MMBtu/hr (.05 to 6 MW)

+ NFPA Class 1, 2 or 3 operation

+ Reliable light-off

+ Low opacity, typically less than 10% at startup

+ Reduced igniter maintenance

+ High-energy electric ignition system

+ Flame detection by flame rod or optical scanners

FyrBall igniters for tangentally fired boiler

Today’s industrial enterprises are challenged to expand capacity while meeting ever-increasing safety, efficiency

and performance standards. Through our Coen and Hamworthy Combustion brand products, John Zink Hamworthy

Combustion is world-renowned for reliability, efficiency and innovation in combustion system applications and

installations. We have been an innovative force in combustion systems – delivering technological expertise, design

excellence, practical application and quality research and development with proven performance. Today, we continue

the advancement of combustion equipment and technology to meet existing and emerging challenges in markets

around the globe.

Contact us today to learn more about innovative igniter systems and ancillary products to improve the safety and

performance of your operation.

Experience

PWR-13031

For Coen and Hamworthy parts and maintenance contact: The Americas: +1 650 522 2100 All Other: +44 (0)1202 662700

johnzinkhamworthy.com

United StatesCanadaInternational Headquarters Latin America

Coen Sistemas en Combustión, S.A. de C.V.Av. Juarez No. 40-106Col. Ex-Hacienda de Santa MonicaTlalnepantla Edo. de Mexico C.P. 54050Mexico

T: +52 55 5384 1390F: +52 55 5384 1162

+Hamworthy Combustion Engineering Co. Ltd.Fleets CornerPoole, Dorset BH17 0LAUnited Kingdom

T: +44 (0)1202 662700 F: +44 (0)1202 665333

+ Hamworthy Combustion Asia-Pacific, A registered business of Koch Chemical Technology Group Singapore Pte. Ltd.260 Orchard Road, #11-01/09 The Heeren 238855 Singapore

T: +65 6732 7555F: +65 6835 2031

++ John Zink Company LLC11920 East Apache StreetTulsa, Oklahoma 74116 United States of America T: +1 918 234 1800F: +1 918 234 2700

Europe Middle EastAfrica, India Asia-Pacific

©2013 John Zink Company LLC. JOHN ZINK HAMWORTHY COMBUSTION is a trademark of John Zink Company LLC. COEN is a registered trademark of Coen Company Inc in the U.S. and other countries worldwide. FYRBALL, FYRSTORM and FYRBOLT are trademarks of Coen Company, Inc. HAMWORTHY COMBUSTION is a registered trademark of Hamworthy Combustion Engineering Limited in the U.S. and other countries worldwide.