Page 1

2015

Distributor & End User Terms & Conditions IDX INCORPORATED

400 West Cedar Street El Dorado, Arkansas 71730

870-862-2051 800-643-1109 FAX# 870-862-3472

Web Site www.idxinc.com Email sales@idxinc.com

TERMS & CONDITIONS: Prices quoted are F.O.B. El Dorado, AR and are subject to change without notice.

SHIPPING: Orders received by noon will be shipped (if in stock) the following day, except next day or 2 day shipments.

DROP SHIPMENTS & SPECIAL HANDLING: Drop shipments will be charged a $10.00 special handling fee per shipment. Same day, next day, or international shipments requests will be charged a $25.00 special handling fee per shipment.

PAYMENT TERMS: Open account terms are granted to IDX distributors & OEM with established credit. If credit is not established, we accept VISA, Master Card, American Express, Discover Card, or Prepay check, wire transfer or authorized COD shipment. Include sufficient funds on check. Open account terms will be terminated in the event of consistent past due invoices or insufficient funds on check. IDX does not setup open accounts outside the continental United States. Terms are credit card or wire transfer. All “Custom X-Mark Site Specific Tokens, Custom Wickets Cards, Credit Card Reader orders” require a deposit of 50% with order and balance upon shipment.

LEAD TIME: Standard lead-time for all products in the IDX Price List, unless otherwise noted, is 3 to 4 weeks ARO.

MINIMUN BILLING NOT INCLUDING SHIPPING IS $25.00 PER INVOICE.

PRICING: Distributors should not advertise below 15% off the MSRP - Manufactures Suggested Selling Price.

RETURNS: A Return Material Authorization (RMA) number must be issued by IDX prior to the return of any goods. That number must be clearly marked on the outside of the box of returned merchandise. “Specials” may not be returned for credit. In order to be given the highest possible credit on returned goods, the original IDX invoice number must be supplied. All merchandise must be returned within 30 days of original IDX invoice date to receive maximum credit. A restocking fee of not less than 30% plus any repairs will apply. “No credit can be given if more than 12 months old” “No credit can be given if installed”

WARRANTY: IDX products, except for certain accessories and components, are warranted against defective materials and workmanship for one year from the date of manufacture. THERE ARE NO OTHER WARRANTIES, EXPRESSED OR IMPLIED. Defective units or parts should be returned to the factory with transportation prepaid. If inspection shows them to be defective, they will be repaired or replaced without charge, FOB factory. IDX DOES NOT assume any liability for damages during shipping. IDX DOES NOT warranty products where someone other than IDX has attempted to repair or have been modified or altered from the original manufactured specifications.

REPAIRS: IDX repairs 95% of all products that have been manufactured by IDX. IDX prefers that warranty repairs go through the Authorized IDX Distributor or OEM, since some OEM’S offer an extended warranty. The factory can handle non-warranty repairs direct, A Return Material Authorization (RMA) number needs to be issued by IDX prior to the return of any goods to be repaired. With the RMA# IDX can obtain the correct return shipping information via FedEx or UPS and contact information. TERMS for repairs are: Credit Card Only- NO COD’s Credit Card number is requested at time of issuing RMA#.

CANCELLATION: On Blanket orders, IDX reserves the right to manufacture all parts in advance for quantity specified on order. In the event of cancellation or change of specification, the customer will be held responsible for the cost involved. SPECIAL ORDER OR MODIFIED PRODUCTS ARE NOT CANCELABLE.

BLANKET ORDER POLICY: Blanket orders are designed to help our customers to obtain minimum quantity discount and better deliveries. Such an order will be accepted, subject to the following terms:

1. Total value shall be for a minimum of $5000.00. 2. Products may be combined as shown in each product group. Groups cannot be combined. 3. Scheduled shipments on blanket orders may be scheduled up to 12 months with 5 scheduled shipments. One re-

scheduling is permitted during the life of the order, providing written notice is given to IDX not less than 30 days prior to delivery.

4. The total quantity shall be released within one year of date of order. An invoice will be issued at blanket quantity discount, if the total order is not released for shipment within one year.

5. Special items shall not be grouped with standard items, regardless of any similarity.

Page 2

**PRICING SUBJECT TO CHANGE PER MARKET CONDITIONS** DESCRIPTION PAGE # DESCRIPTION PAGE #

Bill Acceptors & Credit Card Display Timers for Walls & Combo Vac Bill acceptors for Meters 11,15 Big Time Two Timer – BT912-M 32 Credit card add-on solutions 11,15 Big Time Two Timer w/Low Profile S/S Case BT912 33 Credit Card & Fleet Card solutions with back end 6,7,8 Big Time Vendor Timer – BT912-V 9 drops 31

Circuit Boards Jumbo Time Two Timer – BT922 34 Big Time Display Only (P900 & P900-2) 32 Giga Timer Multi Timer GIGA TIME 1200 21 Big Time Two Timer Relay Output (P912-) 32 Giga Timer Accessories GIGA TIME 1200 21 Big Time Multi Timer (P907) 32 Accessories for Big Time 34,35 Big Time Vendor Timer (P912-V) 32 Big Time Dryer Display Two Timer – DD910 31 Dryer Display (PD810) 32 Big Time Multi Timer – BT907 30 Dryer Display Timer (PD910) 32 Digital Displays only Jumbo Time Sign (P820-A) 32 Accessories for Displays 27-33 Jumbo Time Two Timer (P922) 32 Auto Teller – BS820A series 30

Coin Counters Big Time BT900- 30 Electronic (BD200) 27 Big Time Two Timer BT900-2 30 Interface 27,29 Digital Display for Automatic Blower / Dryer- DD810 30

Contact/Relay Module Jumbo Time Display – BS820 series 30 Bill Acceptor Isolated Pulse 11,15,33,39 Meter Box Digital Display LTT800- 30 Coin Pulse Splitter 38 Stainless Steel Covers for Displays 30,33 Current Transformer 38 Display Accessories Dry Contact Relay 36,39 Big Time EEPROM 33-35 Isolated Input Module for low pressure 35 Big Time Processor 33-35 Plug-In Relay 37 Big Time Special Program 33-34 PS200 3rd stack Relay 14,38 Big Time Enclosure 35 Vendor Relay 16,22,27,38 Little Two Timer EEPROM 21,33 Power Interface Relay for count-up & inhibit interface 20,31,39 Little Two Timer Processor 21,33

Credit Card Systems Snubbers 21 Credit Card Solution Count-Up Cellular 11,15 Terminal Strips 20 Credit Card Solution Pulse Cellular 11,15 Little Two Timer/ GT 200 Housing 21,35 Credit Card Solution mounted in S/S box 11,15 Big Time LED 33 Credit Card Solution for Venders MDB interface 11,15 Little Two Timer / GT 200 LED 21,33 Credit Card Readers with Backend systems 8 Programmer Corded - RC800 25,34 Credit Card Readers replacement parts 7,11 Programmer Wireless - IR800 25,32 Revalue & Kiosk Stations 9 Programmer Receiver - IRM800 21,25,34

Data Acquisition Electrical Accessories ScadaWash Controller 7,8 Hour Meters 24vac 38 Monitoring interface - WT-RAM 8 Double Pole Plug in relays 38 WI-FI Bridge 8 8 Pin Socket Base 19,26,27,29,36

Decals & Signs 11 Pin Socket Base 27,36 Big Time 33 Freeze Controls Jumbo Time 33 ZOLAR 37 Menu Signs 25 Foam Blower 37 Menu Sign Service Spots 26 Light Sensor 37 Meter Box 22,23,25 Temperature Probe 37 N1 Credit Card 11 Isolated Input Module for low pressure 37 Wicket Kiosk 8 Antifreeze Timer - AF411 27,37 Wicket Bay & Meter 7,8,25 Fuses

Demos and Tools Slow Blow for transformer 38 Crimping Tools 39 Slow Blow for GT 200 5amp 38 Lighted Sign Demo 39 Heaters Meter Box Demo 39 Meter Box 22 Thickness Gauge 39 Horn / Alerts Xeptor Test Stand 39 Coin Beeper & Last Alert 24/120 AC 27

Digital Clock Timers for Meter Boxes Last Alert AC 12 – 28VAC 21,28,29,33,36 GT 200 & GT 200-A Giga Time 20,36 Last Alert DC 12 – 28VDC 28,31,34,36 AT300 with AT300-DB3S7 Display 28 Giga Timer 1200 21,36 Options for GT200 Display Clock 20,32,36 LTT802 & GT 200 Accessories 20,32,36

Page 3

DESCRIPTION PAGE # DESCRIPTION PAGE # Lamps & LED’s SPECIAL TIMERS

LED Segments for Big Time & Jumbo Time 35 AF411 Antifreeze 37 LED Segments for Little Two Time/ GT 200 21,33,35 BT907DOYLE-U 31 Menu Signs Lamp 26 BT912DOYLE –U 31 Meter Box Lamp 22 BT912FRAGRA 30 Ultra Bright LED Segments for Big Time 35 BT912-LUCKY 30 Ultra Bright LED Segments for Jumbo Time 35 Extended Time AT411E-NRIS 10,29

Locks LTT802FRAGRA –REPLACEMENT GT200-A 30 Cam 22 LTT802-RYKO 30 Pin 22 SPECIALTY & D&H STYLE of TIMER AT300 28 Plug 19,22 LTT802-V 20 Puck 22 BT912 D&S 28 Screw 22 BT912IVS 28

Meter Boxes BT912 PREMIER 28 Accessories 15-18 Stainless Steel Bill Acceptor Meter 15,17 Big Time Covers & Enclosures 32,35 Cash Drawer 17 Menu Frames 25 Credit Card Meters 12-18 Lighted Frames 25 Meter Box Demos 37 Little Two Timer / GT 200 19,27,32 Options 15-17 Meter Box 14-17,35 Safe Style 14,15,17 Security Bars 19,21 Timemaster options 16 Xeptor Faceplate 14

Meter Box Accessories Switches Electronic Rotary Switches PS200 14-17 Electronic 10 Position PS200 15,16,27 Key Switches 19,22 PS200 Accessories 27 Locks 22 Key Switch 19,22,33 Rotary Switches 22 Knob 22 Push Button Switches 22 Rotary 8,10 & 12 Position 2 Stack 22 Terminals 22 Rotary 8 & 10 Position 3 Stack 22 Push Button Switches 22 Push Button Switch - Lighted 22 Decals 14,21 Push Button Controls GT 200 MUX 20 Cash Drawers 18 Telemetry Service Doors 19 Remote Monitoring WT-RAM 7 Vault Doors 19 WI-FI Bridge 7 Cash box MCB “DISCONTINUED” Modem N1 10

Motor Delays & Multiplexer Timer – Bay & Vacuum High Pressure Pump - MX1 MX2 MX3 37 Flat Pack – AT411E AT412 AT413 AT414 AT422 29 Low Pressure Pump - MX8 MX9 MX10 37 Plug In – AT402 28 Spot Free Pump - MX8 MX9 MX10 37 Time Machine replacement Timer AT300 28 Bladder Tank Replacement - MX8 MX9 MX10 37 AT411E-NR1S Extended time 10,29,37 Multi-Color Brush or Wax System - MX48 38 Timer - Display

Remote Control Meter Box - LTT800 / GT200 / GT1200 20,21,36,38 Cable 27,35 Wall Mount – BT900 BT900-2 BT907 BT912 BT922 30-32 IR800 Infrared Remote 27,35 AT300 add-on display 28 RC800 27,35 Timer – Non Display Remote Box 30,35 Accessories 25-29 IRM800 Receiver 21,34 Antifreeze AF411 27,37

Safes / Vault AT300 Specialty MFG & D&H replacement 28 Electronic Stainless Steel 19 AT411E-NRIS Extended Range Time 10,29 Accessories 19 Plug In - AT402 28

SKADAWash Two Timer - AT422 29 SCADAWash controller 7 Vacuum 115VAC or 24VAC - AT411E 29 Gateway add-on 7 Vacuum 220VAC or 24VAC - AT412E 29 Remote Cellular access 8 Vacuum w/ 24VAC for Coin Xeptor - AT413 29 Readers & Kits 8 Vacuum 220VAC w/ 24VAC for Coin Xeptor - AT414 29 Accessories 8 Tokens

Snubber & Terminal X-Mark Single Metal Coded Tokens 40 Meter Boxes 22 X-Mark Bi-Metal Coded Tokens 40 Power Surge Suppressor 23 X-Mark Tokens with Decals 40 X-Mark Hologram Flag with Eagle 40

Page 4

DESCRIPTION PAGE # DESCRIPTION PAGE # Transformers & Power Supplies Wire & Cable

220/208/120V x 24VAC 100 VA 36 Big Time to PC 34 220/208/120V x 24VAC 150 VA 36 Computer Cables 34 220/208/120V x 24VAC 40 VA 36 Credit Card Pulse wiring 3’ & 10’ N1 10 Power Supply 1A 12 VAC for Edge USA Tech 36 Credit Card Reader to Modem 10’ cat5 N1 10 Power Supply IR800 9VDC 36 LTT802/ GT 200 Wiring Harness 19,30 Power Supply Wicket Programming 5VDC 2amp 6,10,36 Meter Box Wiring Harness 13,14 Power Supply Night Access Controller 12VDC 10,36 Remote Wire 30 Power Supply Wicket ASGSRD 12VDC 10,36 Xeptor to PC 34 Power Supply Wicket Kiosk 24VDC 100W 36 Xeptor Wiring Harness 10

Wickets NTS Night Access & ASGARD Shielded cable 9 SCADA Controller on site 6 Xeptors SCADA Controller off site Gateway 6,7 Bill Acceptors 10 NTS Readers Credit, Wicket, Combo 7 X10 Series Coin/ Token Xeptors 12,13 NTS Kits 7 Electronic – Single Quarter Only MA602- F/C/A 11 NTS Wireless Bridges & Gateways 7 Electronic – 6 coin Non- Coded MA800CR0???? 11 NTS Wireless RAM 7 Electronic – 12 coin Non-Coded MA812CR0???? 11 Wicket Cards 7 Xeptors -Auto Entry NTS wiring 7 American- Changer Pay Station 13 NTS Accessories & Spare Parts 7 Hamilton - ACW 11,12

Wickets Stored Value Hamilton – ACW 4 11,12 Cards- Configuration / Program 7 Hamilton - GoldLine 11,12 Cards – Gift 7 Hamilton - HTK 12 Cards – Fleet 7 Exacta / Exacta One 12 Cards – Service 7 ICS 12 Cards – User 7 Standard Changer - Guardian 12 C Module WR88 to CPU interface 6,10 Unitec Portal 11,12 CD Box -Module 6,10 Unitec – Wash Select II 12 HV Box -Module 6,10 Xeptors - Specials LV Box -Module 6,10 Multi-output fixed - 6 13 MDB Box -Module 6,10 Multi-output fixed - 3 13 Programmer module WR88PM 6 Multi-output Field Programmable - 3 11,12,13 RS232 to USB adaptor 6,10 MA800 12VDC 11 Signs & Decals 6,7,10 X10 12VDC 12 Site License 6 Xeptors Venders Wiring Harness for CD / HV / LV/ MDB Modules C/F Laurel Metals 11,12 WR88 Reader 6 D&S Mfg 12 WR88 Parts 6,9 Xeptor Accessories

Wicket ASGARD Bill Acceptor Interface Module 10,33 ASGARD Entry Sys 9 Coin Counter Multi inputs 23 ASGARD Replacement parts 9 Coin Cup 13,20 Extend Range Timer AT411E-NR1S 9 Diverter Faceplate 13

Wicket KIOSK & Revalue Stations Faceplate – 2 “ Snap-In 13 IDX Wicket Kiosk Front & Rear Load 8 Faceplate – 2” (old style) 13 IDX Wicket Kiosk Code Entry 8 Personality Plug 13 IDX Wicket Kiosk w / Credit Card 8 Shoulder Screw 13 IDX Wicket Kiosk Credit Card ONLY 8 Thickness Clip 13 Options for Kiosk & Revalue Stations 8 MA19 replacement parts 13

Wicket TURBO Accessories Test Stand w/ 24V power supply 34 Wicket Jackpot Display 8,9 X-Mark Single Metal Coded Tokens 38 Wicket Redemption & Registration Center 8,9 X-Mark Bi-Metal Coded Tokens 38 Wicket Night Access Stand Alone Sys 8,9 X-Mark Tokens with Decals 39 Wicket Night Access Computer Control Sys 8,9 X-Mark Hologram Flag with Eagle 39 Wicket Night Access Controller only 9 Turbo Access Options 9,10 Turbo Access Replacement Parts 9,10

Page 5

NEW FOR 2015

MODEL NUMBER DESCRIPTION MSRP

DISC. CODE

**NEW REPLACEMENT TIMERS FOR SPECIALTY ** PATENTED TWO TIME SELECT- U.S.A. PATENT #5,371,681

AT300 NON DISPLAY TIMER DESIGNED TO FIT THE FOOT PRINT OF SPECIALTY Mfg & D&H NON DISPLAY 24VAC TIMER $129.95 E RELAY OUTPUT FOR LONGER LIFE, DIP SWITCH PROGRAMMING FOR TIME AND COINS ACCUMULATING FROM 2 SECOND’S TO 8.5 MINUTES PER COIN. ACCEPTS 256 COIN INPUTS WITHOUT RESETTING. STANDARD FEATURES INCLUDE: OPERATING VOLTAGES 12VDC/AC TO 28VAC 32VDC, RELAY HORN OUTPUT, LAST ALERT COIN, MOISTURE RESISTANT CASE, OPTIONAL DISPLAY MODEL #AT300-DB. SIZE AT300-2 AT300 WITH THE TWO TIMER FEATURE, OPERATING VOLTAGES 12VDC/AC TO 28VAC 32VDC $164.95 E AT300-QUAD DUAL- AT300-2 TWO TIMERS IN ONE CASE WITH 4 SEPARATE OUTPUTS $197.95 E AT300DB-3S7 DISPLAY 7-SEGMENT TO CONVERT THE AT300, AT300-2, AT300-QUAD NON-DISPLAY TIMER TO A DISPLAY TIMER. FITS $129.95 E THE SAME FOOT PRINT AS SPECIALTY 3 CHARTER DISPLAY. LC526-AC/DC LAST ALERT HORN MULTI VOLTAGE- 12 VDC/VAC TO 28VAC OR 36VDC STAINLESS STEEL DIAPHRAGM 2 WIRE HOOK $41.67 C UP - RED SIGNAL WIRE & BLACK COMMON TO BE USED W/ AT300 TIMER SERIES OR OTHERS MFG TIMERS **NEW VAULT READY METER BOXES WITH PUSH BUTTON SWITCHES**

MB165-10P GIGA TIME METER IS COMPLETE WITH GT1200 MULTI TIME TIMER AND 12 SERVICES MESSAGES, LC525 ALERT HORN $2621.50 E 10 LIGHTED S/S PUSH BUTTONS, MUX BOARD, SWITCH BOARD, X10 COIN XEPTOR, HEATER, SNUBBER TERMINAL, 2 PUCK STYLE LOCKS, 10 GAUGE STAINLESS STEEL ENCLOSURE WITH HIDDEN HINGE TILT DOWN SERVER DOOR COIN VAULT READY WITH 3/8” X 1 3/8” SECURITY WRAP SIZE 16.125” w X 21.875”H x 8”D MB165-12P SAME FEATURES AS MB165-10P BUT WITH 12 LIGHTED S/S PUSH BUTTONS $2795.62 E MB165-10PV SAME AS THE MB165-10P SETUP TO MOUNT VALADATOR- OPTIONAL $2668.00 E MB165-12PV SAME AS THE MB165-12P SETUP TO MOUNT VALADATOR- OPTIONAL $2844.12 E

**NEW CASH DRAWER METER BOXES WITH S/S PUSH BUTTON SWITCHES**

MCD165-10P GIGA TIME METER IS COMPLETE WITH GT1200 MULTI TIME TIMER AND 12 SERVICES MESSAGES, LC525 ALERT HORN $3125.78 E 10 LIGHTED S/S PUSH BUTTONS, MUX BOARD, SWITCH BOARD, X10 COIN XEPTOR, HEATER, SNUBBER TERMINAL, 2 PUCK STYLE LOCKS, 10 GAUGE STAINLESS STEEL ENCLOSURE WITH HIDDEN HINGE TILT DOWN SERVER DOOR CASH DRAWER HAS A SECURITY RING AROUND THE PUCK STYLE LOCK. SECURITY WRAP 3/8” X 1 3/8” AROUND METER HOUSING: SIZE 16.125” W X34.25” H x 8”D MCD165-12P SAME FEATURES AS MCD165-10P BUT WITH 12 LIGHTED S/S PUSH BUTTONS $3302.10 E MCD165-10PV SAME AS THE MCD165-10P SETUP TO MOUNT VALADATOR- OPTIONAL $3172.28 E MCD165-12PV SAME AS THE MCD165-12P SETUP TO MOUNT VALADATOR- OPTIONAL $3348.60 E

**ASK ABOUT OTHER CONFIGURATION & OPTIONS FOR THE MB165 & MCD165 **

**NEW CREDIT CARD SOLUTIONS BY IDX**

CELLULAR WITH SMALLER FOOT PRINT, EASIER TO USE, SIMPLIFIED DESIGNS N1 IRISVPOSB IRIS ADD-ON CREDIT CARD READER, WIRELESS MODEM, ANTENNA & ISOLATED COIN SIGNAL WIRING HARNESS NO $731.11 A VERIZON PHONE OR CABLE CONNECTION REQUIRED. THE IRIS MODEM USES A CELLULAR SIGNAL TO GET AUTHORIZATION TO START THE DEVICE VOICE MODULE ALONG WITH THE DISPLAY WILL NOTIFY THE CARD HOLDER THAT THE TRANSACTION HAS BEEN APPROVED THEN THE COIN PULSES ARE SENT TO THE TIMER TO TURN ON THE BAY, AUTO TELLER, VENDER OR VACUUM. THE IRIS MODEM HAS A SMALLER FOOT PRINT SIZE 4.75”W x 3.75”H x 1.3”D HAS 2 MOUNTING OPTIONS MAGNETIC OR SCREW. INCLUDES DISPLAY THAT INFORMS THE OPERATOR OF STATUS ON IRIS MULTI-PULL MERCHANT ACCOUNT OPTIONS FOR CARD PROCESSING, VIEW ACTIVITY ONLINE, ALERTS IF MODEM IS OFF LINE AND WHEN IT RETURNS CARD ACCEPTANCE VIA ACCEPT MAG STRIP & or RFID CREDIT CARDS. NEW MULTI PRICING PULSE CONFIGURATION GREAT FOR VENDERS AND AUTO CASHIERS. N1 IRISVPOSB KIT 1 MOUNTED IN A STAINLESS STEEL ENCLOSURE WITH CUSTOM DECAL FOR LOCATION 12”W x 7.35”H x 2.5”D $989.43 A -KIT VERIZON WITH CARD READER THE TOTAL DEPTH IS 4.094”

Page 6

MODEL NUMBER DESCRIPTION MSRP

DISC. CODE

WICKETS™ NTS and SCADAWash™ SOLUTION

CREDIT CARD SOLUTION, DATA ACTUATION AND FLEET ACCOUNTS VIA CELLULAR SECURE GATEWAY SK-NTS KIT COMBO- WICKET NTS™ RFID READER AND “SMART CREDIT CARD READER” SK-NTS CCR-SMART $699.00 E COMBO WITH SK-WT RAM-NTS WIRELESS MODULE, DECAL AND WIRING HARNESS SK-NTS GATEWAY CELLULAR ACCESS POINT TO CLOUD SERVER COLLECTS & MANAGES CREDIT CARD DATA FOR WICKETS NTS™. $1999.00 A SK-NTS GATEWAY- CELLULAR ACCESS POINT TO CLOUD SERVER COLLECTS DATA FROM ALL CONNECTED DEVICES, $2499.00 A PLUS MONITOR CASH, CREDIT CARD, WICKET ACTIVATE, PRESSURES, TEMPERATURES, CHANGERS, IDX DISPLAY TIMERS, SERVICES AND ALLOWS END USER TO ADD VALUE TO THEIR WICKET CARDS SK-SCADAWASH SCADAWash™ IS THE CONTROLLER FOR WICKETS NTS™ RFID CARD & CREDIT CARD CONTROLLER THE STANDARD $4795.00 A MODEL INCLUDES A 12 TOUCH SCREEN, MOUNTED IN A CABINET, W/ WICKET READER, NTS SOFTWARE- STORES WICKET™ CARD BALANCES, ASGARD™ CONTROLS & COLLECT DATA USAGE DATA WIRELESSLY FROM EACH WT RAM-NTS VIA A WIRELESSLY. SCADAWash™ IS ALSO THE CREDIT CARD GATEWAY REQUIRES OPTIONAL SK-SCADA CELL AND THIS ALSO GIVES YOU REMOTE VIEWING OF WASH ACTIVITY. SK-SCADA CELL ADD-ON CELLULAR TRANSMITTER / RECEIVER FOR SCADAWash™ CONTROLLER $899.00 A WICKETS™ NTS and SCADAWash™ SOLUTION MONTHLY FEES FOR CELLULAR CONNECTION, CLOUD ACCESS TO SECURE GATEWAY SERVER AND BACKUP FILES SCADAWash™ & WICKETS NTS™ GATEWAY PLUS $59.95 PER MONTH PER LOCATION WICKETS NTS™ CREDIT CARD ONLY GATEWAY $39.95 PER MONTH PER LOCATION ` “WASH COMMANDER” SK-UWC UNIVERSAL WASH CONTROLLER IS DESIGNED TO REPLACE THE OLD ANTIQUATED AUTOMATIC WASH CONTROLLERS $7,500.00 A MOUNTED IN A NEMA4 ENCLOSURE IS A 12” TOUCH SCREEN CONTROLLER, INTERNAL POWER SUPPLY, USING IDX IO MODULE WITH 24 INPUTS & OUTPUTS, THE UWC FIRMWARE WILL ALLOW THE OWNER TO CONFIGURE HIS WASH CYCLES, ADJUST SPEEDS, DWELL TIMES, SET WEEP CONTROLS, MONITOR CHEMICAL USAGE AND MORE. SK-TC TUNNEL COMMANDER DESIGNED TO MEET THE MODERN TUNNEL WASH OWNERS AND INSTALLER NEEDS FOR $7,995.00 A EASY INTERFACE USING A 12” TOUCH SCREEN TO WASH COMMANDER SOFTWARE, 24 INPUTS AND OUTPUTS USING THE IDX IO MODULES, FIRMWARE WILL ALLOW THE OWNER TO CONFIGURE WASH CYCLES, SPECIALS, CONVEYOR SPEEDS, CHEMICAL USAGE, SIGNAGE, NOTIFY WHEN MAINTENANCE IS REQUIRED ON EACH PIECE OF EQUIPMENT, AUDIT FEATURES, REMOTE ACCESS BY OWNER IF EQUIPPED FOR CELLULAR OR ETHERNET AND MORE. SK-TC / 32 TUNNEL COMMANDER UP GRADED WITH 32 INPUTS & OUTPUTS WITH 12” TOUCH SCREEN $8,995.00 A SK-TC / 48 TUNNEL COMMANDER UP GRADED WITH 48 INPUTS & OUTPUTS WITH 15” TOUCH SCREEN $11,995.00 A SK-TC / 72 TUNNEL COMMANDER UP GRADED WITH 72 INPUTS & OUTPUTS WITH 15” TOUCH SCREEN $13,995.00 A SK-TC / 96 TUNNEL COMMANDER UP GRADED WITH 96 INPUTS & OUTPUTS WITH 15” TOUCH SCREEN $15,995.00 A

** ASK ABOUT OTHER OPTIONS AND CONFIGURATIONS** **ON THE WASH COMMANDER PRODUCT LINE** WATCH FOR ADDITIONAL NEW PRODUCTS LATER THIS YEAR BAY METERS, ENTRY SYSTEMS, CONTROLLERS, WIRELESS SOLUTIONS & MORE

Page 7

MODEL NUMBER DESCRIPTION MSRP

DISC. CODE

WICKETS™ SV, WICKET NTS™, ASGARD™, WICKET™ KIOSK FOR CAR WASH, LAUNDRY & AMUSEMENT- WICKET READERS & CARDS ALL WICKET READERS LISTED CAN BE MOUNTED INTO IDX METER BOXES FOR NO ADDITIONAL CHARGE WICKETS™ STORED VALUE SOLUTION WK-WR88 KIT-LV LOW VOLTAGE 12- 28VDC/VAC STORED VALUE WICKET READER WR88 RFID WITH WK-LV MODULE, $360.00 E DECAL AND WIRING HARNESS WK-WR88 KIT-HV HIGH VOLTAGE 90-277VAC STORED VALUE WICKET READER WR88 RFID WITH WK-LV MODULE, $360.00 E DECAL AND WIRING HARNESS WK-WR88 KIT-MDB MDB VENDING MACHINES- STORED VALUE WICKET READER WR88 RFID WITH WK-LV MODULE, $360.00 E DECAL AND WIRING HARNESS WK-WR88 KIT-CD CARD DISPLAY, IDX DISPLAY TIMERS- STORED VALUE WICKET READER WR88 RFID WITH WK-LV $360.00 E MODULE, DECAL AND WIRING HARNESS WICKETS™ STORED VALUE ACCESSORIES AND SPARE PARTS WR88 STORED VALUE RFID WICKET READER WITH CABLE AND RS232 END CAN BE ATTACHED TO ANY $250.00 E OF THE WICKET BOXES TO INTERFACE WITH 99% OF THE TIMERS & CONTROLLERS MADE FOR DIFFERENT INDUSTRIES U.S.A. PATENT #7,268,688,B2 WK-CD MODULE INTERFACE AND POWER MODULE FOR IDX DISPLAY TIMER WITH “CARD DISPLAY protocol” $135.00 E WK-HV MODULE PULSE INTERFACE AND POWER MODULE HIGH VOLTAGE 95VAC TO 270VAC FOR VACUUMS ETC $135.00 E WK-LV MODULE PULSE INTERFACE AND POWER MODULE LOW VOLTAGE 12 VAC / VDC TO 28VAC OR 34VDC NON $135.00 E IDX DISPLAY TIMERS OR OTHER MFG TIMERS WK-MDB INTERFACE AND POWER MODULE FOR STANDARD CHANGER MAKERS, REVALUE STATION $135.00 E MODULE AUTO TELLER, GLASS FRONT VENDORS & OTHER EQUIPMENT BS WR1 WICKET BAY INSTRUCTION SIGN 8.5”x11” UV COATED PLASTIC $25.11 D BS WR2 WICKET METER INSTRUCTION DECAL “TAP HERE” 1.5” x 1.5” $2.58 D WK 88PM COMPUTER INTERFACE TO PROGRAM WICKET READERS, CARDS, RE-VALUE CARDS, READ REPORT $695.00 D CARD & DEDUCT PREMIUM POINTS INCLUDES 5VDC POWER SUPPLY, DB9 TO SERIAL CABLE, SOFT- WARE, CARDS: 2- REPORT, 3- PROGRAMMING, 3- SERVICES SINGLE SITE, SINGLE INDUSTRY LICENSES ****OPTIONAL MULTI SITE LICENSING*** $100.00 NE

T

**** REPLACEMENT SITE LICENSING **** $50.00 NET

WK-WR88 BODY OUTER SHELL FOR WR88 READER WITH DECAL $20.46 A WK-WR88 ESC-M ESCUTCHEON RING BLACK UV STABILIZED FOR WR88 BODY $11.60 A WK-WR88 NUT NUT FOR WR88 SHELL $1.38 A WK-WR88WASHER WASHER (2 REQUIRED) FOR WR88 SHELL $0.79 A WK-WR S600 REPLACEMENT “W” DECALS FOR WICKET BODY $1.05 A WK-WR USBDB9 USB-SERIAL ADAPTOR 2.5’ CORD $26.80 A WK-C MODULE COMPUTER INTERFACE MODULE TO UPGRADE WR88 READER FIRMWARE $58.00 A TRA5DC-2 5 VOLT 2 AMP POWER SUPPLY FOR WR88 PM & WK-C MODULE $58.00 A WICKETS™ NTS and SCADAWash™ SOLUTION SK-SCADAWASH SCADAWash IS THE CONTROLLER FOR WICKETS NTS RFID CARD AND CREDIT CARD CONTROLLER $4795.00 A THE STANDARD MODEL INCLUDES A 12 TOUCH SCREEN, MOUNTED IN A CABINET, WITH WICKET READER, NTS SOFTWARE- STORES WICKET CARD BALANCES, ASGARD CONTROLS & COLLECT DATA USAGE DATA WIRELESSLY FROM EACH WT RAM-NTS VIA A WIRELESS MODEM PROVIDED. IF CREDIT CARD READERS ARE ATTACHED SCADAWash CONTROLLER IS THE GATEWAY TO THE MERCHANT ACCOUNT. IF EQUIPPED SCADAWash CAN BE VIEW REMOTELY OFF SITE BY THE OWNER. SK-SCADAWASH 15 SCADAWash WITH 15 “ TOUCH SCREEN $4995.00 A SK-SCADA CELL ADD-ON CELLULAR TRANSMITTER / RECEIVER FOR SCADAWash CONTROLLER $899.99 A

CONSULT FACTOR FOR CUSTOM CONFIGURATION

Page 8

MODEL NUMBER DESCRIPTION MSRP

DISC. CODE

WICKETS™ NTS and SCADAWash™ SOLUTION SK-NTS KIT COMBO COMBO- WICKET NTS RFID READER AND “SMART CREDIT CARD READER” SK-NTS CCR-SMART $699.00 E WITH SK-WT RAM-NTS WIRELESS MODULE, DECAL AND WIRING HARNESS SK-NTS KIT-WR88 WICKET RFID READER SK-NTS W/SK-WT RAM-NTS WIRELESS MODULE, DECAL & WIRING HARNESS $419.30 E SK-NTS KIT-CD CARD DISPLAY MODULE SK-NTS CD FOR IDX DISPLAY TIMERS- WICKET READER RFID SK-NTS, $419.30 E WITH SK-WT RAM-NTS, DECAL AND WIRING HARNESS SK-NTS CTUP-KIT COUNT UP FOR COMBO- WICKET NTS KIT – REMOTE STOP BUTTON, DECAL , RELAY $75.00 E SK-NTS KIT-MDB MDB MODULE FOR GLASS FRONT VENDERS, AUTO TELLERS WITH MDB, AND REVALUE KIOSK $520.00 E WICKET READER RFID SK-NTS, WIRELESS MODULE SK-WT RAM-NTS, DECAL AND WIRING HARNESS SK-NTS –WR-LV?? MACHINE SPECIFIC WIRING HARNESS FOR LAUNDRY EQUIPMENT $??? A SK-NTS-WR-AUTO?? AUTO ENTRY MACHINE SPECIFIC WIRING HARNESS $??? A SK-NTS GATEWAY CELLULAR ACCESS POINT TO CLOUD SERVER COLLECTS & MANAGES CREDIT CARD FOR WICKETS NTS $1995.00 A SK-NTS GATEWAY- CELLULAR ACCESS POINT TO CLOUD SERVER COLLECTS DATA FROM ALL CONNECTED DEVICES, $2499.00 A PLUS MONITOR CASH, CREDIT CARD, WICKET ACTIVATE, PRESSURES, TEMPERATURES, CHANGERS, IDX DISPLAY TIMERS, SERVICES AND ALLOWS END USER TO ADD VALUE TO THEIR WICKET CARDS MONTHLY FEES FOR CELLULAR CONNECTION, CLOUD ACCESS TO SECURE SERVER AND YOUR BACKUP FILES SCADAWash & WICKETS NTS GATEWAY PLUS $59.95 PER MONTH PER LOCATION WICKETS NTS GATEWAY $39.95 PER MONTH PER LOCATION ` WICKETS NTS ACCESSORIES AND SPARE PARTS SK-NTS NTS RFID WICKET READER WITH CABLE AND RS232 END TO BE ATTACHED TO WT RAM-NTS $159.00 E WIRELESS MODULE WITH WIRING 9-28 VAC / VDC PATENT #7,268,688,B2 SK-NTS CCR-SMART NTS SMART CREDIT CARD READER W/CABLE & 6 PIN PLUG TO BE ATTACHED TO WT RAM-NTS $385.00 E SK-NTS-CCR -WRING SMART CARD READER WIRING HARNESS TO BE ATTACHED BETWEEN SMART READER & WT RAM-NTS $59.95 E SK-NTS CD NTS CARD DISPLAY MODULE TO CONNECT TO IDX DISPLAY TIMERS WITH CABLE AND RS232 END TO $135.00 E BE ATTACHED TO SK-WT RAM-NTS SK-WT RAM-NTS WIRELESS INTERFACE BETWEEN SCADA WASH OR NTS GATEWAY AND WICKET NTS CONTROLS $385.00 E SK-WT-RAM WIRING POWER & INTERFACE WIRING $59.95 E SK-WT-RAM ANTEN ANTENNA FOR SK-NTS RAM $66.95 E SK-NTS MDB INTERFACE AND POWER MODULE FOR STANDARD CHANGER MAKERS, REVALUE STATION $135.00 E AUTO TELLER, GLASS FRONT VENDORS & OTHER EQUIPMENT SK-BRIDGE WIRELESS ACCESS POINT MOUNTED IN INDUSTRIAL ENCLOSURE TO BOOST SIGNAL TO SCADAWash $295.00 E BS WR1 WICKET BAY INSTRUCTION SIGN 8.5”x11” UV COATED PLASTIC $25.11 D BS WR2 WICKET METER INSTRUCTION DECAL “TAP HERE” 1.5” x 1.5” $2.58 D WICKETS SV & NTS CARD WS1C??????? WICKETS SV & NTS STOCK CARD PRICING 1 - 50 $4.99 EACH A 100 – 1,000 $2.14 EACH A 1,100 – 5,000 $2.03 EACH A 5,100 – 24,000 $1.93 EACH A

STOCK CARDS ONLY SOLD IN LOTS OF 100 CARDS ONLY CUSTOM CARDS MINIMUM OF 1,000 SOLD IN LOTS OF 500 $2.32 EACH

ONE TIME ART-WORK CHARGE 1,000 cards $100.00 or 25,000 cards $350.00 REPLACEMENT SERVICE CARDS WS1P??????? PROGRAMMING CARD 6.66 A WSIR??????? REPORT CARD 6.66 A WSIS??????? SERVICE CARD 6.66 A WS1F??????? FLEET CARDS –STOCK CARDS SOLD IN LOTS OF 100 2.10 A

Page 9

MODEL NUMBER DESCRIPTION MSRP

DISC. CODE

WICKET™ COMPACT KIOSK FOR REVALUE & CARD DISPENSER by IDX Inc U.S.A. PATENT #4,998,612 / #5,121,824 / #7,268,688,B2 ALL MODELS INCLUDE, CPU, USER DISPLAY, WICKET READER LIGHTED SELECTION REV KIOSK RL #1 REVALUE KIOSK BY IDX - REAR LOAD - COINCO BILL ACCEPTOR $1-$20, CARD DISPENSED WITH NO $4499.00 A VALUE ON CARD, 100 CARD DISPENSER, USER MULTI LINE DISPLAY, 2 LIGHTED SELECTION BUTTONS ONE WICKET READER & CPU. REAR ACCESS PAINTED STEEL CASE opening size 20”H x 16”W x 12”D W/ 10 GAUGE STAINLESS STEEL PLATE & MULTI LANGUAGE INSTRUCTION DECAL 2” WIDER THAN CABINET REV KIOSK RL#1A SAME FEATURES AS MODEL REV KIOSK RL#1 INCLUDES N1 CREDIT CARD SOLUTION WITH SMART $5494.00 A CREDIT CARD READER. PRINTER IS OPTIONAL REV KIOSK FL #1 REVALUE KIOSK BY IDX- FRONT LOAD - COINCO BILL ACCEPTOR $1-$20, CARD DISPENSED WITH NO $4999.00 A VALUE ON CARD, MULTI LINE USER DISPLAY, 2 LIGHTED SELECTION BUTTONS, WICKET READER & CPU, STAINLESS STEEL CABINET 10 GAUGE W/FOLD DOWN DOOR, 2 PUCK STYLE LOCKS FOR SECURITY opening size 16 1/8””H x 21 7/8” W x 8”D & MULTI LANGUAGE INSTRUCTION DECAL REV KIOSK FL#1A SAME FEATURES AS MODEL REV KIOSK FL#1 INCLUDES N1CREDIT CARD SOLUTION WITH SMART $5994.00 A CREDIT CARD READER. PRINTER IS OPTIONAL KIOSK REVALUE & CARD DISPENSER NON-CASH MODELS REV KIOSK WVK IDX WICKET VALUE KIOSK WVK, NO CASH REQUIRED AT KIOSK TO ADD VALUE TO CUSTOMERS $3899.00 A WICKET CARD. PAYMENT IS RECEIVED OFF SITE AND KEY PAD AT WVK IS USED TO ADD VALUE TO THE CARD, WICKET READER, 7” TOUCH SCREEN, CELLULAR MODEM, CABINET 11 GAUGE S/S, FRONT ACCESS, FOLD DOWN DOOR WITH 2 CAM LOCKS, size 151/5” H x 11 1/4 ” W x 8” D REV KIOSK FL#1B REVALUE KIOSK BY IDX - FRONT LOAD –CREDIT CARD ACCEPTANCE ONLY INCLUDES N1 SMART CARD $5599.00 A READER TO ACCEPT MAG STRIP CREDIT CARDS, RFID CREDIT CARDS, CONTACT SMART CHIP CARD, NFC EQUIP SMART PHONES THAT HAVE ENABLED CREDIT CARD PAYMENT USING ISIS, GOGGLE WALLET etc. INCLUDES 100 CARD DISPENSER, USER MULTI LINE DISPLAY, 2 LIGHTED SELECTION BUTTONS, ONE WICKET READER, & CPU. **RECEIPT PRINTER OPTIONAL. STAINLESS STEEL 10 GAUGE ENCLOSURE opening size 16 1/8”H x 21 7/8”W x 8”D WRAPPED WITH A 3/8” S/S STRAP, 2 PUCK STYLE LOCK TO SECURE THE DOOR AND INSTRUCTION DECAL REV KIOSK RL#1B REVALUE KIOSK BY IDX - REAR LOAD –CREDIT CARD ACCEPTANCE ONLY INCLUDES N1 SMART CARD $5099.00 A READER TO ACCEPT MAG STRIP CREDIT CARDS, RFID CREDIT CARDS, CONTACT SMART CHIP CARD, NFC EQUIP SMART PHONES THAT HAVE ENABLED CREDIT CARD PAYMENT USING ISIS, GOGGLE WALLET, ETC. INCLUDES 100 CARD DISPENSER, USER MULTI LINE DISPLAY, 2 LIGHTED SELECTION BUTTONS, ONE WICKET READER, & CPU. **RECEIPT PRINTER OPTIONAL** REAR ACCESS PAINTED STEEL CASE opening size 20”H x 16”W x 12”D W/ 10 GAUGE STAINLESS STEEL PLATE 4” WIDER THAN OPENING AND INSTRUCTION DECAL OPTIONS FOR IDX WICKETS KIOSK STATIONS REVK- P RECEIPT PRINTER ADDED TO ANY IDX REV KIOSK STATION $697.00 A REV-VAL/CA UPGRADE TO ACCEPT CANADIAN BILLS $ 5,10,20, $250.00 A REV-VAL/ST1C UPGRADE TO GLOBAL NOTE ACCEPTANCE World Wide Bill acceptance $250.00 A REVK-CDECAL PERSONALIZED MACHINE DECALS / CUSTOM $195.00 A REVK-ART ART WORK FOR CUSTOM DECALS ONE TIME CHARGE PER DESIGN $150.00 NET

CONTACT IDX FOR KIOSK IN OTHER COUNTRIES WICKET PRODUCTS FOR PROMOTION & LOYALTY PROGRAMS U.S.A. PATENT #4,998,612 / #5,121,824 / #7,268,688,B2 WICKET- WICKET JACKPOT DISPLAY IS DESIGNED TO REWARD YOUR LOCAL CUSTOMERS AS IT $1069.00 D JACKPOT AND MAKE IT FUN TO WASH AT YOUR CAR WASH WICKET- WICKET REGISTRATION CENTER IS THE FIRST SELF SERVICE INFORMATION GATHER CENTER $1069.00 D REGISTRATION THIS WILL GIVE THE CAR WASH OWNER A TRUE DATA BASE OF HIS CUSTOMERS WICKET- WICKET REDEMPTION CENTER IS WHERE YOUR WILL BE ABLE TO CONVERT POINTS $1069.00 D REDEMPTION INTO BONUS BUCKS WITH OUT THE OWNER HAVING TO BE AROUND

Page 10

MODEL NUMBER DESCRIPTION MSRP

DISC. CODE

WICKET PRODUCTS FOR PROMOTION & LOYALTY PROGRAMS U.S.A. PATENT #4,998,612 / #5,121,824 / #7,268,688,B2 WICKET- REGIS WICKET REGISTRATION/ REDEMPTION COMBO CENTER IS THE FIRST SELF SERVICE $1539.00 D /REDEMPTION SYSTEM TO TRULY PROMOTE THE CAR WASH AS IT GATHERS THE END USERS INFORMATION AND IT IS ABLE TO CONVERT THE CUSTOMERS POINTS INTO BONUS BUCKS AND GIVE THE WICKET CARD HOLDER THEIR BIRTHDAY BUCKS WITH OUT THE OWNER HAVING TO BE AROUND WICKET-BALANCE WICKET BALANCE STATION IS DESIGNED FOR REMOTE VIEWING WICKET CARD BALANCE IT $1069.00 D STATION MOUNTED IN A LOW PROFILE STAINLESS STEEL CASE WITH A WR88 READER REQUIRES 24VAC SECURITY ACCESS CONTROLS USED FOR DOORS, GATES, PARKING, CAR WASH, PRESSURES WASHERS , LAUNDRY, ETC U.S.A. PATENT #7,268,688,B2 WK-ASGARD ASGARD IS AN ENTRY CONTROL SYSTEM THAT CAN MANAGE RESTRICTED ACCESS DEVICES $1558.00 D LIKE DOORS, PARKING GARAGES, GATES, AUTOMATIC CARWASHES. INCLUDED IS SOFTWARE TO MANAGE UP TO 12 DEVICES BY TIME AND DATE AS WELL AS WICKET CARD NUMBER. 1 – WR88PM PROGRAM MODULE W/ POWER SUPPLY, 1-WR88 READER,1 - ALUMINUM ENCLOSURE, 1- NIGHT ACCESS CONTROLLER, 1-USB TO SERIAL CONNECTORS, 1-12VDC TRANSFORMER, 50’ SHIELDED CABLE, & 1-“TAP HERE” DECAL. ***REQUIRES A COMPUTER TO OPERATE NOT SUPPLIED BY IDX*** SECURITY ACCESS CONTROLS FOR DOORS, GATES, PARKING etc WK-ASGARD-KIT INCLUDES 1-WR88 READER, 1-ALUMINUM ENCLOSURE, 1-NIGHT ACCESS CONTROLLER, 1-USB $699.50 D TO SERIAL CONNECTORS, 1-12VDC TRANSFORMER, 50’ SHIELDED CABLE & 1-“TAP HERE” DECAL SECURITY ACCESS CONTROLS FOR CAR WASH, PRESSURES, etc U.S.A. PATENT #7,268,688,B2 WK ASGARD-D ASGARD-D IS A TIMED CONTROL SYSTEM THAT CAN MANAGE AND CONTROL CAR WASH USAGE $1558.00 D LIKE BILLING FOR USAGE AT AN AUTO DEALER OR WASH CLUB. INCLUDES SOFTWARE THAT CAN MANAGE UP TO 12 DEVICES BY TIME AND DATE AS WELL AS WICKET CARD NUMBER. 1 – WR88PM PROGRAM MODULE W/ POWER SUPPLY, 1-WR88 READER,1 – ACCESS CONTROLLER WITH SPECIAL INTERNAL PULSE RELAY, 1-USB TO SERIAL CONNECTORS, 1- EXTENDED TIME TIMER, 1-12VDC TRANSFORMER, 50’ SHIELDED CABLE, & 1-“TAP HERE” DECAL. ****REQUIRES A COMPUTER TO OPERATE NOT SUPPLIED BY IDX**** WK ASGARD-D INCLUDES 1-WR88 READER, 1-NIGHT ACCESS CONTROLLER W/ SPECIAL INTERNAL RELAY, 1-USB $699.50 D KIT 1 TO SERIAL CONNECTORS, 1-12VDC TRANSFORMER, 50’ SHIELDED CABLE & 1-“TAP HERE” DECAL ASGARD™ REPLACEMENT PARTS & ACCESSORIES

WK-NAC12VSA NIGHT ACCESS CONTROLLER FOR STAND ALONE SYSTEM $495.95 B WK-NAC12VTA NIGHT ACCESS CONTROLLER FOR COMPUTER / REGISTERED CUSTOMERS $495.95 B WK-NAC ALB NIGHT ACCESS DOOR MOUNTED ALUMINUM ENCLOSURE $21.27 A WK-WR88 BODY OUTER SHELL FOR WR88 READER WITH DECAL $20.46 A WK-WR88 ESC-M ESCUTCHEON RING BLACK UV STABILIZED FOR WR88 BODY $11.60 A WK-WR88 NUT NUT FOR WR88 SHELL $1.38 A WK-WR88WASHER WASHER (2 REQUIRED) FOR WR88 SHELL $0.79 A MB199-51 CONTROL CABLE / 2 TWISTED PAIRS OF SHIELDED ALL COPPER CABLE sold by the foot $1.16 A TRA12VDC 12 VOLT DC POWER ADAPTOR FOR NIGHT ACCESS SYSTEMS $24.95 A AT411E-NR1S EXTENDED RANGE TIMER FOR ASGARD CONTROLS $116,58 C WICKETS™ SV REPLACEMENT PARTS & ACCESSORIES

WK-WR S600 REPLACEMENT “W” DECALS FOR WICKET BODY $1.05 A WK-WR USBDB9 USB-SERIAL ADAPTOR 2.5’ CORD $26.80 A WK-C MODULE COMPUTER INTERFACE MODULE TO UPGRADE WR88 READER FIRMWARE $58.00 A

Page 11

MODEL NUMBER DESCRIPTION MSRP

DISC. CODE

WICKETS™ SV REPLACEMENT PARTS & ACCESSORIES TRA5DC-2 5 VOLT 2 AMP POWER SUPPLY FOR WR88 PM & WK-C MODULE $32.37 A TRA12VDC 12 VOLT DC POWER ADAPTOR FOR NIGHT ACCESS SYSTEMS $24.95 A BT/LTT199-1 CABLE HOOK UP BETWEEN DISPLAY AND COMPUTER RS232 TO DB9 SERIAL $20.00 A WR88 STORED VALUE WICKET READER $250.00 E WK-CD MODULE INTERFACE AND POWER MODULE FOR IDX DISPLAY TIMER WITH “CARD DISPLAY protocol” $135.00 E WK-HV MODULE PULSE INTERFACE AND POWER MODULE HIGH VOLTAGE 95VAC TO 270VAC FOR VACUUMS ETC $135.00 E WK-LV MODULE PULSE INTERFACE AND POWER MODULE LOW VOLTAGE 12 VAC / VDC TO 28VAC OR 34VDC NON $135.00 E IDX DISPLAY TIMERS OR OTHER MFG TIMERS WK-MDB MODULE INTERFACE AND POWER MODULE FOR STANDARD CHANGER MAKERS, REVALUE STATION $135.00 E AUTO TELLER, GLASS FRONT VENDORS & OTHER EQUIPMENT BILL ACCEPTOR FOR METER BOXES

ALL BILL ACCEPTORS LISTED CAN BE MOUNTED IN METER BOXES FOR NO ADDITIONAL CHARGE

BCMEI2400 MARS 2400 SERIES BILL ACCEPTOR – 24VAC – WILL ACCEPT U.S. BILL $1, $2, & $5 $555.50 A BCMEI2600 MARS 2612 SERIES BILL ACCEPTOR – 24VAC – WILL ACCEPT U.S. BILL $1, $5, $10, & $20 $654.61 A BCVL62R44US COIN CO VANTAGE SERIES BILL ACCEPTOR –24VAC- WILL ACCEPT U.S. BILLS $1, $5, $10, & $20 $449.00 A BCVP64B47US COIN CO VANTAGE SERIES BILL ACCEPTOR –12VDC/24VAC - WILL ACCEPT U.S. BILLS $1, $5, $10, & $449.00 A $20 PROGRAMABLE, INCLUDES 24 VAC TO 12 VDC POWWER SUPPLY MA70-V ISOLATED 24VAC POWER SUPPLY AND DISABLE RELAY MODULE FOR BILL ACCEPTORS $33.50 C OTHER MFG CREDIT CARD CONTROLS AND SPARE PARTS CAN BE MOUNTED IN IDX METERS

HAMIL 100-0127 HAMILTON DAN SYSTEM METER BOX CONTROLS MB155 & MCD155 SERIES ONLY $1545.21 A WASH GEAR SE WASH GEAR METER BOX CONTROLS MB150, MB155, MCD150, & MCD155 SERIES $2200.00 A N1 IRIS-VP0SB IN ONE TECHNOLOGIES READER & IRIS CELLULAR TRANSMITTER PULSE INTERFACE ACCEPTS $731.11 A MAG STRIP, RFID , NFC AND CONTACT CREDIT CARDS WITH VERIZON CELLULAR N1 IRIS-VPOSB KIT2 IN ONE IRIS-VPOSB MOUNTED IN S/S CASE W/ CUSTOM DECAL SIZE 12”W x 7.35”H x 2.5”D W/READER 4.094”D $989.43 A N1 IRIS-VP0SB MDB IN ONE TECHNOLOGIES READER & IRIS CELLULAR TRANSMITTER VENDING INTERFACE $731.11 A N1 IRIS-VP0SB GSM IN ONE TECHNOLOGIES READER & IRIS CELLULAR TRANSMITTER PULSE INTERFACE ACCEPTS $731.11 A MAG STRIP, RFID, NFC AND CONTACT CREDIT CARDS WITH AT&T CELLULAR N1 IRIS-VPOSB KIT3 IN ONE IRIS-VPOSB MOUNTED IN S/S CASE WITH CUSTOM DECAL WITH AT&T CELLULAR $989.43 A N1 IRIS CT UP KIT IN ONE-IRIS COUNT UP KIT FROM PULSE – MA79 RELAY, STOP BUTTON, HARNESS & STOP DECAL $75.00 E N1 ICS-ANT-0 1 IN ONE MAG MOUNT ANTENNA $27.78 A N1 ICS-ANT-03 IN ONE HIGH GAIN STUB MOUNT ANTENNA W/ 3’ CABLE 66.67 A N1 ICS-VPOSB2 IN ONE SMART CARD READER IN BLACK $250.00 A N1 ICS-LAN-01 IN ONE SECURE LAN DONGLE REQUIRES SPECIAL MODEM $250.00 A N1 ICS-WIFI-01 IN ONE SECURE WIFI DONGLE REQUIRES SPECIAL MODEM $250.00 A N1 IRIS-MODEM IN ONE CELLULAR IRIS COMPACT MODEM $488.89 A MBWH-N1 WIRING HARNESS FOR N1-38600 SERIES --KIT 1/ KIT 2/KIT01/KIT02 PULSE OUT / CARD READER $61.32 D MBWH-N1-HIBIT WIRING HARNESS FOR POWER SUPPLY FOR IRIS MODEMS USED IN AUTOMATICS TO INHIBIT $65.32 D IRIS ACCEPTANCE / STOP CARD ACCEPTANCE AT READER REQUIRES MA79 FOR INHIBIT HI MBWH-N1 IRIS WIRING HARNESS W/POWER SUPPLY FOR IRIS MODEMS N1-KIT 1/ KIT 2/KIT01/KIT02 PULSE $61.32 D OUT / CARD READER MA79 POWER RELAY USED W/ COUNT-UP CREDIT CARD SYSTEMS TO HANDLE LOAD POWER AND FOR $33.50 C INHIBIT CIRCUIT IN AUTOMATICS, LAUREL VENDERS, & etc DEC-N1-C DECAL FOR N1 38600 KIT 2, N1 ICS-VPOSB-KIT 02, AND N1 IRIS-VPOSB KIT $46.15 D

Page 12

MODEL NUMBER DESCRIPTION MSRP

DISC. CODE

ELECTRONIC COIN “XEPTORS”

ELECTRONIC SINGLE COIN “XEPTORS” ALL IDX COIN ACCEPTORS CAN BE MOUNTED INTO METER BOXES FOR NO ADDITIONAL CHARGES

MA601 ULTIMATE GEMINI TWIN ***OBSOLETE*** REPLACED BY MA602-F or MA602-C MA610 ULTIMATE GEMINI ***OBSOLETE*** NO REPLACEMENT AVAILABLE MA602-F GEMINI TWIN II THE ULTIMATE SOLID STATE COIN “XEPTOR” STAND. QUARTER ONLY W/ BENT COIN $167.23 C RELEASE, COIN SENSE OPTICS, 2” WIDE STAINLESS STEEL FACEPLATE & 4 WIRE RELAY OUTPUT MA602-A GEMINI TWIN II THE ULTIMATE SOLID STATE COIN “XEPTOR - INSERT ONLY- $151.95 C MA602-C GEMINI TWIN II THE ULTIMATE SOLID STATE COIN “XEPTOR MOUNTED IN MA20 FACE PLATE $175.57 C MULTI COIN ELECTRONIC COIN “XEPTORS” U.S. 5,046,841; AUS. – 619,639; CAN. – 1,313,806; U.K. – 2,227,347 MA800CR0C30F HAWK SOLID STATE MULTI-METAL / MULTI-COIN “XEPTOR” WITH MA19 SNAP-IN STAINLESS STEEL $191.95 C FACEPLATE. THE OEM’S DREAM “XEPTOR” W/ IT’S FIELD PROGRAMMABLE, MULTI-NATIONAL COIN CAPABILITY AND ACCEPTS 6 DIFFERENT SIZES OF COINS OR TOKENS WITH DIFFERENT VALUES. IT’S EXCLUSIVE ELECTRONIC DESIGN OFFERS A BENT COIN RELEASE IN AN ELECTRONIC “XEPTOR” TO MAKE COIN JAMS A THING OF THE PAST. THIS “XEPTOR” OFFER A MULTI-COLOR INDICATOR LED FOR OPERATIONAL STATUS & FIELD DIAGNOSTICS. MA800CR0C34F HAWK “XEPTOR” WITH COIN CREDIT OPTICS AND MA19 SNAP-IN STAINLESS STEEL FACEPLATE. $221.99 C MA800CR0C30A HAWK “XEPTOR” SET UP TO ACCEPT COINS SIZED FROM 1.130” TO 0.888” WITHOUT FACEPLATE $176.67 C MA800CR0C34A HAWK “XEPTOR” WITH COIN CREDIT OPTICS AND SIZED FROM 1.130” TO 0.888” LESS FACEPLATE $219.99 C MA800CR0C30C HAWK “XEPTOR” SET UP TO ACCEPT COINS SIZED FROM 1.130” TO 0.888” WITH MA20 “OLD STYLE” $200.29 C 2 “ WIDE FACEPLATE MA800CH0C30A HAWK “XEPTOR” SET UP FOR HAMILTON ACW4 WIRING HARNESS $189.95 C MA800CL0030A HAWK “XEPTOR” SET UP TO ACCEPT COINS SIZED FROM 1.130” TO 0.952” WIRED FOR LAUREL $269.00 C ELECTRONIC VENDORS MA800CR0D70F HAWK “XEPTOR” SET UP FOR EURO COINS $2, $1, $0.50 & $0.20 AND MA19 SNAP-IN STAINLESS $191.95 C STEEL FACEPLATE MA800CR0H70F HAWK “XEPTOR” SET UP TO ACCEPT AUSTRALIA’S AND NEW ZEALAND’S $1 AND $2 COINS $191.95 C MA800CR0H30F HAWK “XEPTOR” SET UP TO ACCEPT BRITISH 1POUND AND 50 PENCE COINS $191.95 C MA803CM0??0A HAWK MULTI-OUTPUT / MULTI-COIN “XEPTOR” WITH 3 SEPARATE COIN SIGNALS AND ACCEPTS 6 $259.95 C DIFFERENT COINS. CAN PRE-SORT COINS IF OPTIONAL #DD-1050 DIVERTER DRIVER & OPTIONAL #MA19-D SNAP-IN FACE PLATE IS ADDED. MA803DM0??0F HAWK MULTI-OUTPUT / MULTI-COIN “XEPTOR” WITH DIVERTER, 3 SEPARATE COIN SIGNALS AND $398.38 C ACCEPTS UP TO 6 DIFFERENT COINS. ALSO INCLUDES THE SAME FEATURES AS OTHER MA800’S MA803SG0??0A HAWK MULTI-OUTPUT / MULTI-COIN “XEPTOR” SET UP FOR HAMILTON GOLD LINE W/ HARNESS $259.95 C MA803SG0??4A HAWK MULTI-OUTPUT / MULTI-COIN “XEPTOR” WITH COIN CREDIT OPTICS SET UP FOR HAMILTON $293.29 C GOLD LINE WIRING HARNESS MA803CZ0??0A HAWK MULTI-OUTPUT / MULTI-COIN “XEPTOR” SET UP FOR HAMILTON ACW4 WIRING HARNESS $259.95 C MA803CZ0??4A HAWK MULTI-OUTPUT / MULTI-COIN “XEPTOR” WITH COIN CREDIT OPTICS SET UP FOR HAMILTON $319.95 C ACW4 WIRING HARNESS MA803SM0C34F HAWK MULTI-OUTPUT / MULTI-COIN “XEPTOR” WITH COIN CREDIT OPTICS SET UP FOR UNITEC $335.15 C WITH PORTAL WIRING HARNESS MA800SP0C30F HAWK 6 COIN MUILT-COIN “XEPROR” 12VDC INPUT VOLTAGE RELAY OUTPUT W/ MA19 FACE PLATE $208.33 C MA812CR0??0F HAWK 12 COIN MULTI-COIN “XEPTOR” WITH MA19 SNAP-IN STAINLESS STEEL FACEPLATE. SAME $239.44 C FEATURES AS THE MA800 BUT WILL ACCEPT UP TO 12 DIFFERENT COIN TYPES OF DIFFERENT SIZES AND DENOMINATIONS MA812CR0??4F HAWK 12 COIN MULTI-COIN “XEPTOR” WITH MA19 SNAP-IN STAINLESS STEEL FACEPLATE. WITH $269.48 C COIN CREDIT OPTICS

Page 13

MODEL NUMBER DESCRIPTION MSRP

DISC. CODE

X10 SERIES “XEPTORS®”

FOR SITE SPECIFIC CODED X-MARK® TOKEN PATENT U.S. 5,046,841; AUS. 619,639; CAN. 1,313,806; U.K. 2,227,347

ALL ACCEPTORS LISTED CAN BE MOUNTED INTO METER BOXES FOR NO ADDITIONAL CHARGE

X10CR??030F EAGLE OPTICALLY ENCODED TOKEN “XEPTOR” ® WITH MA19 SNAP-IN STAINLESS STEEL FACE- $228.58 C PLATE SOARS HIGH ABOVE THE REST WITH ITS MULTI COIN / TOKEN CAPABILITY. IDEAL FOR MIXING PROMOTIONAL TOKENS WITH STANDARD ONES & THE CONVENIENCE OF MIXING OLD TOKENS NEW ONES DURING CHANGEOVER PERIOD. ITS EXCLUSIVE ELECTRONIC DESIGN OFFERS A COIN W/RELEASE LEVER IN AN ELECTRONIC CODED “XEPTOR” TO MAKE JAMS A THING OF THE PAST. THIS “XEPTOR” OFFERS X-MARK® OPTICALLY ENCODED TOKENS & A MULTI-COLOR INDICATOR LED FOR OPERATIONAL STATUS & FIELD DIAGNOSTICS X10CR??030C EAGLE OPTICALLY ENCODED TOKEN “XEPTOR”. WITH OLD STYLE 2” FACE PLATE $236.92 C X10CH??030A EAGLE OPTICALLY ENCODED TOKEN “XEPTOR” FOR HAMILTON ACW4 WITH RETROFIT WIRING $226.58 C HARNESS & PLUG X10CR????4F EAGLE OPTICALLY ENCODED TOKEN “XEPTOR” WITH COIN CREDIT OPTICS AND SNAP-IN MA19 $258.62 C STAINLESS FACE PLATE X10CM????0A EAGLE OPTICAL ENCODED TOKEN MULTI-OUTPUT “XEPTOR” WITH 3 SEPARATE COIN SIGNALS, 6 $286.58 C DIFFERENT COINS. IDEAL FOR AUTO CASHIERS OR ADD DIVERTER OUTPUT #DD-1050 & OPTIONAL MA19-D SNAP-IN FACEPLATE TO PRESORT COINS X10SH5AC34A EAGLE OPTICAL ENCODED TOKEN MULTI-OUTPUT “XEPTOR” WITH 3 SEPARATE COIN SIGNALS, 6 $328.25 C DIFFERENT COINS SET FOR HAMILTON HTK AUTO CASHIER WITH 75/150 CODE ANGLE X10CM5AC34F EAGLE OPTICAL ENCODED TOKEN MULTI-OUTPUT “XEPTOR” WITH 3 SEPARATE COIN SIGNALS, 6 $348.62 C DIFFERENT COINS SET UP FOR STANDARD CHANGER MAKERS “GUARDIAN” AUTO CASHIER X10DM5AC34R XEPTOR SET UP FOR UNITEC “WASH SELECT II” WITH DIVERTER OUTPUT, 3 SEPARATE COIN $435.01 C SIGNALS, WIRING CONNECTIONS AND WITH COIN CREDIT OPTICS W/ 75/150 CODE X10DM39C34R XEPTOR SET UP WITH 39 CODE SET TO BE USED IN UNITEC “WASH SELECT II” W/ 45/135 CODE $435.01 C X10DM5AC36R XEPTOR SET UP FOR STANDARD CHANGER “GUARDIAN” WITH DIVERTER OUTPUT, 3 SEPARATE $435.01 C COIN SIGNALS, INHIBIT CIRCUIT AND WITH COIN CREDIT OPTICS WITH 75/150 CODE ANGLE X10DM39C36R XEPTOR SET UP FOR STANDARD CHANGER “GUARDIAN” WITH DIVERTER OUTPUT, 3 SEPARATE $435.01 C COIN SIGNALS, INHIBIT CIRCUIT AND WITH COIN CREDIT OPTICS WITH 45/135 CODE ANGLE X10SG????0A EAGLE OPTICALLY ENCODED TOKEN MULTI-OUTPUT “XEPTOR” SET UP FOR HAMILTON GOLD LINE $286.58 C ACW WITH PLUG X10SG5AC34A EAGLE OPTICALLY ENCODED TOKEN MULTI-OUTPUT “XEPTOR” W/COIN CREDIT OPTICS SETUP $328.25 C FOR HAMILTON GOLD LINE ACW WITH PLUG WITH 75/150 CODE ANGLE X10SG39C34A EAGLE OPTICALLY ENCODED TOKEN “XEPTOR” SET UP W/ 39 CODE ANGLE SET FOR GOLD LINE $328.25 C W/COIN CREDIT OPTICS AND PLUG WITH 45/135 CODE ANGLE X10CZ????0A EAGLE OPTICALLY ENCODED TOKEN MULTI-OUTPUT “XEPTOR” SET UP FOR HAMILTON ACW4 WITH $286.58 C PLUG X10CZ????4A EAGLE OPTICALLY ENCODED TOKEN MULTI-OUTPUT “XEPTOR” W/COIN CREDIT OPTICS SETUP $316.58 C FOR HAMILTON ACW4 WITH PLUG

Page 14

MODEL NUMBER DESCRIPTION MSRP

DISC. CODE

X10 SERIES “XEPTORS®”

PATENT U.S. 5,046,841; AUS. 619,639; CAN. 1,313,806; U.K. 2,227,347

FOR SITE SPECIFIC CODED X-MARK® TOKEN

X10CB5AC30A EAGLE OPTICALLY ENCODED TOKEN MULTI-OUTPUT “XEPTOR” SETUP FOR AMERICAN PAY $286.58 C STATION W/ CODE SET 75/150 X10CB5AC34A EAGLE OPTICALLY ENCODED TOKEN MULTI-OUTPUT “XEPTOR” WITH COIN CREDIT OPTICS SETUP $328.25 C FOR AMERICAN PAY STATION W/ CODE SET 75/150 X10CB39C34A AMERICAN PAY STATION MODEL WITH COIN CREDIT OPTICS SETUP W/ CODE SET 35/145 $328.25 C X10N3??C70F EAGLE OPTICALLY ENCODED TOKEN “XEPTOR” WITH 3 SEPARATE OUTPUT WIRES, EACH W/ ONLY $477.62 C 1 PULSE PER OUTPUT. X10N6??C70F EAGLE OPTICALLY ENCODED TOKEN “XEPTOR” WITH 6 SEPARATE OUTPUT WIRES, EACH W/ ONLY $477.62 C 1 PULSE PER OUTPUT. ACCESSORIES FOR ALL IDX MULTI-COIN “XEPTORS” PP-CWHR PERSONALITY PLUG FOR HAMILTON ACW WITH RELAY OUTPUT FOR IDX MA800 & X10 “XEPTORS” $13.25 C PP-CWR PERSONALITY PLUG WITH RELAY OUTPUT FOR IDX MA800 & X10 “XEPTORS” $9.93 C PP-CWRFRAG PERSONALITY PLUG FOR MA800 & X10 “XEPTORS” INSTALLED IN FRAGRAMATIC VAC WITH PLUG $13.25 C PP-CWRIVS PERSONALITY PLUG FOR MA800 & X10 “XEPTORS” INSTALLED IN IVS / GINSAN VAC WITH PLUG $13.25 C PP-CWR3 PERSONALITY PLUG DESIGNED Fragramatics FOR IDX MA800 & X10 “XEPTORS” WITH 3 WIRES $9.93 C PP-CWRL PERSONALITY PLUG WITH RELAY OUTPUT FOR IDX MA800 & X10 “XEPTORS” IN LAUREL VENDORS $13.25 C PP-CWRNRI3 PERSONALITY PLUG WITH 3 RELAY MODULE OUTPUT FOR IDX X10NR “XEPTORS” $210.00 C PP-CWRNRI6 PERSONALITY PLUG WITH 6 RELAY MODULE OUTPUT FOR IDX X10NR “XEPTORS” $210.00 C PP-MO PERSONALITY PLUG FOR MULTI-OUTPUT IDX MA800 & X10 “XEPTORS” $13.25 C PP-MOB PERSONALITY PLUG TO BE USED IN AMERICAN “PAY STATION” WITH MA800 & X10 “XEPTORS” $13.25 C PP-MOSG PERSONALITY PLUG FOR MULTI-OUTPUT IDX MA800 & X10 “XEPTORS” IN HAMILTON’S “GOLD LINE” $13.25 C PP-MOZ PERSONALITY PLUG FOR MULTI-OUTPUT IDX MA800 & X10 “XEPTORS” IN HAMILTON’S ACW4 $13.25 C MA19 SNAPPY 2” SNAP-IN FACEPLATE FITS STANDARD 2” WIDE FOOTPRINT. REDUCES COIN JAMS FROM $41.85 B MISALIGNED METER BOX DOORS AND ACCEPTOR. ALLOWS THE OPERATOR TO REMOVE THE ACCEPTOR WITHOUT UNSCREWING THE XEPTOR” FROM THE METER DOOR. INTERCHANGES WITH MOST OTHER “MANUFACTURER’S ELECTRONIC ACCEPTORS. MA19-D SNAPPY 2” SNAP-IN FACEPLATE WITH COIN DIVERTER INSTALLED DIVERTS $71.85 B MA19-DR SNAPPY 2” SNAP-IN FACEPLATE WITH COIN DIVERTER INSTALLED ON UNITEC X10DM SERIES $71.85 B MA19-DIVITRFP DIVERTER PLATE FOR MA19-D & MA19-DR $5.82 B MA19-EXITCHUTE SNAP IN EXIT CHUTE FOR MA19, MA19-D, & MA19-DR $1.94 B MA19-INLETCHUT INLET CHUTE FOR MA19, MA19-D, & MA19-DR $3.64 B HT401 XEPTOR MOUNTING STUD ROUNDED SHOULDERS $1.15 C MLX10STOP THICKNESS CLIP FOR MA602, MA800 & X10 XEPTORS $3.43 C MA20 2” WIDE “OLD STYLE” FACEPLATE FOR X10, & MA800 “XEPTORS” $36.93 B MA20-C COIN CHUTE FOR MA20 OR MA19 FACEPLATE FOR METERS MB150 & MCD150 $6.08 B MA21 2” WIDE STAINLESS STEEL FACEPLATE FOR MA601 “XEPTORS” $36.12 B MB199-22 PLASTIC COIN CATCHER FOR MA19, MA20, & MA21 2” WIDE FACEPLATES $2.50 D METER BOXES FOR VAULTS / SAFES PATENT HIDDEN HINGED FRONT DOOR - U.S.A. PATENT #4,998,612 & #5,121,824 MB100 COIN METER FOR SAFE- SIZE 8”W x 11”H x 5.75”D - FULLY WIRED, INDICATOR LIGHT, WITH 8 $309.91 B POSITION SELECTOR SWITCH, CAM LOCKS WITH 1 KEY, BACK PANEL DRILLED AND TAPPED FOR TIMER, COUNTER, HEATER OR LAST COIN ALERT. MBP100 COIN METER FOR SAFE- SIZE 8”W x 11”H x 5.75”D - TO BE USED WITH PIN LOCK FULLY WIRED, $356.66 B INDICATOR LIGHT, W/ 8 POSITION SELECTOR SWITCH, BACK PANEL DRILLED & TAPPED FOR TIMER, COUNTER, HEATER OR LAST COIN ALERT. MB150 BIG BOX COIN METER FOR SAFE – SIZE 9.5”W x 14H x 8”D – ERGONOMICALLY LAID OUT, FULLY $490.53 B WIRED, 8 POSITION SELECTOR SWITCH, INDICATOR LIGHT, 2 CAM LOCKS WITH KEYS, BACK PANEL DRILLED & TAPPED FOR COUNTER, HEATER OR LAST COIN ALERT.

Page 15

MODEL NUMBER DESCRIPTION MSRP

DISC. CODE

METER BOXES FOR VAULTS / SAFES PATENT HIDDEN HINGED FRONT DOOR - U.S.A. PATENT #4,998,612 & #5,121,824 MB155 BIG BOX COIN METER SAFE STYLE – SIZE 11.5”W x 15.5”H x 8”D – ERGONOMICALLY LAID OUT, $595.00 B FULLY WIRED, 10 POSITION SELECTOR SWITCH, INDICATOR LIGHT, 2 CAM LOCKS W/KEYS, BACK PANEL DRILLED & TAPPED FOR COUNTER, HEATER OR LAST COIN ALERT. HINGED LIFT OUT DOOR WITH SHROUD OVER BILL ACCEPTOR. MB155V BIG BOX COIN METER FOR BILL ACCEPTOR SETUP FOR SAFE – SIZE 11.5”W x 15.5”H x 8” D– $671.78 B ERGONOMICALLY LAID OUT, FULLY WIRED, 10 POSITION SELECTOR SWITCH, INDICATOR LIGHT, 2 CAM LOCKS WITH KEYS, BACK PANEL DRILLED & TAPPED FOR COUNTER, HEATER OR LAST COIN ALERT. HINGED LIFT OUT DOOR WITH SHROUD OVER BILL ACCEPTOR. VAULT / SAFE READY BIG BOX METER BOXES WITH HIGH SECURITY WRAP MB155W BIG BOX COIN METER SAFE STYLE – SIZE 11.5”W x 15.5H” x 8”D W/ 3/8” STAINLESS STEEL WRAP, $706.11 B ERGONOMICALLY LAID OUT, FULLY WIRED, 10 POSITION SELECTOR SWITCH, INDICATOR LIGHT, 2 CAM LOCKS WITH KEYS, BACK PANEL DRILLED & TAPPED FOR COUNTER, HEATER OR LAST COIN ALERT. HINGED LIFT OUT DOOR WITH MOUNTING HOLES FOR PS200 MB155WV BIG BOX COIN METER FOR BILL ACCEPTOR SETUP FOR SAFE – SIZE 11.5”W x 15.5”H x 8”D – WITH $776.97 B 3/8” STAINLESS STEEL WRAP, ERGONOMICALLY LAID OUT, FULLY WIRED, 10 POSITION SELECTOR SWITCH, INDICATOR LIGHT, 2 CAM LOCKS WITH KEYS, BACK PANEL DRILLED & TAPPED FOR COUNTER, HEATER AND LAST COIN ALERT. HINGED LIFT OUT DOOR WITH SHROUD OVER BILL ACCEPTOR AND MOUNTING HOLES FOR PS200.

BIG TIME & GIGA TIME METER BOXES WITH HIGH SECURITY WRAP COMPLETELY WIRED TO TIMER, X10, 10 POSITION ROTARY AND DECAL

MB160-BT BIG TIME COIN METER IS COMPLETE WITH BT912-M TWO TIMER, LC525 ALERT HORN, X10 COIN $1618.00 E XEPTOR, FULLY WIRED, 10 POSITION SELECTOR SWITCH, MB199-8 HEATER, ST301 SNUBBER TERMINAL, MULTI LANGUAGE INSTRUCTION DECAL, 10 GAUGE STAINLESS STEEL METER & DOOR, 2 PUCK STYLE LOCKS W/KEYS MOUNTED TO TILT DOWN SERVICE DOOR, 3/8” X 1 3/8” SECURITY WRAP, SIZE 21.875”W x 16.125”H x 8”D VAULT READY MB160-GT GIGA TIME COIN METER IS COMPLETE W/ GT1200 MULTI TIME TIMER, LC525 ALERT HORN, X10 $1664.00 E COIN XEPTOR, FULLY WIRED, 10 POSITION SELECTOR SWITCH, MB199-8 HEATER, ST301 SNUBBER TERMINAL, MULTI LANGUAGE INSTRUCTION DECAL, 10 GAUGE STAINLESS STEEL METER & DOOR, 2 PUCK STYLE LOCKS W/KEYS MOUNTED TO TILT DOWN SERVICE DOOR, 3/8” X 1 3/8” SECURITY WRAP, SIZE 21.875”W x 16.125”H x 8”D VAULT READY OPTIONS FOR MB160 METERS -12 REPLACE 2 STACK 10 POSITION ROTARY W 2 STACK 12 POSITION ROTARY & FUNCTION DECAL $310.53 E -BV CONVERT DOOR , DECAL AND WIRING TO ADD BILL ACCEPTOR $36.50 E -O ABOVE MB160 METER BOX WITHOUT WIRING & 10 POSITION ROTARY SWITCH PS200 ELECTRONIC 10 POSITION ROTARY SWITCH $375.00 B MA72-P RELAY OUTPUT MODULE FOR PS200 TO ADD 3RD STACK $33.50 C BCMEI2400 MARS 2400 SERIES BILL ACCEPTOR – 24VAC – WILL ACCEPT U.S. BILL $1, $2, & $5 $555.50 A BCMEI2600 MARS 2612 SERIES BILL ACCEPTOR – 24VAC – WILL ACCEPT U.S. BILL $1, $5, $10, & $20 $654.61 A BCVL62R44US COIN CO VANTAGE SERIES BILL ACCEPTOR –24VAC- WILL ACCEPT U.S. BILLS $1, $5, $10, & $20 $449.00 A MA70-V ISOLATED 24VAC POWER SUPPLY AND DISABLE RELAY MODULE FOR BILL ACCEPTORS $33.50 C DEC160 MULTI LANGUAGE INSTRUCTION DECAL FOR MB160-BT & MB160-GT $49.42 B DEC160-BV BILL ACCEPTOR INSET FOR THE MB160 METERS $22.97 B HAMIL 100-0127 HAMILTON DAN SYSTEM METER BOX CONTROLS MB155 & MCD155 SERIES ONLY $1545.21 A WASH GEAR WASH GEAR METER BOX CONTROLS MB150, MB155, MCD150, & MCD155 SERIES $2200.00 A N1 IRIS VPOS IN ONE TECHNOLOGIES READER, CELLULAR TRANSMITTER PULSE INTERFACE & RFID/NFC READER $731.11 A CONNECTION VIA VERIZION, GSM ( AT&T, ROGERS & OTHERS), EITHERNET W/DIFFERENT MODELS MBWH-N1 WIRING HARNESS W/POWER SUPPLY FOR N1 38660KIT 1 PULSE OUT / CREDIT CARD READER $61.32 D MA79 RELAY MODULE TO CARRY LOAD IN COUNT UP MODE OR FOR INHIBIT ISOLATION $33.50 C

Page 16

MODEL NUMBER DESCRIPTION MSRP

DISC. CODE

CASH DRAWER METER BOXES MCD100 COIN METER WITH CASH DRAWER (HOLDS 700 COINS) – SIZE 8”W x 15.5”H x 5.75”D – FULLY WIRED, $537.25 B INDICATOR LIGHT, WITH 8 POSITION SELECTOR SWITCH, CAM LOCK AND KEY, BACK PANEL DRILLED & TAPPED FOR TIMER, COUNTER, HEATER, OR LAST COIN ALERT. ALSO INCLUDES SCREW LOCK FOR CASH DRAWER AND KEY. MCDP100 COIN METER W/ PIN LOCK CASH DOOR (HOLDS C0INS) & CAM LOCK SERVICE DOOR FULLY WIRED, $522.20 B INDICATOR LIGHT 8 POSITION SELECTOR SWITCH, BACK PANEL DRILLED & TAPPED FOR TIMER, COUNTER, HEATER, OR LAST COIN ALERT. PIN LOCK (MB199-7) NOT INCLUDED– SIZE 8” x 15.5” x 5.75”. MCD150 BIG BOX COIN METER W/CASH DRAWER (HOLDS 2800 COINS) – SIZE 9.5”W x 20”H x 8D” – INCLUDES $713.61 B SERVICE DOOR, SECURITY BAR OVER CASH DRAWER SCREW LOCK W/ 1 KEY, & HIGH SECURITY PUCK LOCK W/KEYS, 2 CAM LOCKS W/KEYS ON SERVICE DOOR, ERGONOMICALLY LAID OUT, FULLY WIRED, 8 POSITION SELECTOR SWITCH, BACK PANEL DRILLED AND TAPPED FOR COUNTER, HEATER & LAST COIN ALERT. HINGED LIFT OUT SERVICE DOOR W/ MOUNTING HOLES FOR PS200 MCD155 BIG BOX COIN METER WITH CASH DRAWER (HOLDS 4,000 COINS) – SIZE 11.5”W x 21.75”H x 8”D $946.75 B ERGONOMICALLY LAID OUT, FULLY WIRED, 10 POSITION SELECTOR SWITCH, INDICATOR LIGHT, 2 CAM LOCKS WITH KEYS, SECURITY RING AROUND PUCK LOCK ON CASH DRAWER, BACK PANEL DRILLED & TAPPED FOR COUNTER, HEATER AND LAST COIN ALERT. HINGED LIFT OUT SERVICE DOOR WITH MOUNTING HOLES FOR PS200 MCD155V BIG BOX COIN METER FOR BILL ACCEPTORS W/CASH DRAWER (HOLDS 4,000 COINS) $999.00 B – SIZE 11.5”W x 21.75”H x 8”D – SERVICE DOOR WITH SHROUD TO PROTECT BILL ACCEPTOR. ERGONOMICALLY LAID OUT, FULLY WIRED, 10 POSITION SELECTOR SWITCH, INDICATOR LIGHT, 2 CAM LOCKS WITH KEYS, SECURITY RING AROUND PUCK LOCK ON CASH DRAWER, BACK PANEL DRILLED & TAPPED FOR COUNTER, HEATER AND LAST COIN ALERT. HINGED LIFT OUT SERVICE DOOR WITH MOUNTING HOLES FOR PS200 OPTIONAL MODIFICATION FOR METER BOXES (TO SPECIFY AN OPTION, ADD APPROPRIATE SUFFIX TO BASIC MODEL NUMBER) -3 REPLACE 2 STACK 8 POSITION ROTARY (MB199-2M) WITH 3 STACK 8 POSITION ROTARY SWITCH $56.92 B (MB199-3M) -10 REPLACE 8 POSITION 2 STACK ROTARY & 12 LUG TERMINAL WITH 10 POSITION 2 STACK ROTARY & $75.58 B 16 LUG TERMINAL -10F REPLACE 8 POS. 2 STACK SWITCH & 12 LUG TERMINAL W/ 10 POS. STACK SWITCH, METAL FANNING $99.04 B STRIP & 16 LUG TERMINAL -13 REPLACE 8 POSITION 2 STACK ROTARY & 12 LUG TERMINAL WITH 10 POSITION 3 STACK SWITCH & $121.53 B 16 LUG TERMINAL -13F REPLACE 8 POSITION 2 STACK ROTARY & 12 LUG TERMINAL WITH 10 POSITION 3 STACK SWITCH, $146.53 B METAL FANNING STRIP & 16 LUG TERMINAL THE ABOVE OPTIONS AVAILABLE ON MBWH WIRING HARNESS ONLY -C STAINLESS STEEL WELDED COLLAR FOR METER BOXES $46.15 B -D DIXMOR TIMER HOLE IN SERVICE DOOR $24.43 B -F FANNING STRIP FOR QUICK DISCONNECT ON WIRING HARNESS $18.95 B -G GIGA TIME HOLE IN SERVICE DOOR ON MB155, MBW155, MCD155, MCD155W ONLY $18.46 B -L LITTLE TWO TIMER HOLE IN SERVICE DOOR $18.46 B -O ABOVE 100 & 150 METER BOXES WITHOUT WIRING OR 8 POSITION ROTARY SWITCH <30.77> B -O ABOVE 155 SERIES OF METER BOXES WITHOUT WIRING OR 10 POSITION ROTARY SWITCH <56.92> B -T TIME MASTER HOLE IN SERVICE DOOR WITH STAINLESS STEEL BRACKET $24.43 B (TO SPECIFY AN ACCESSORY, ADD APPROPRIATE MODEL NUMBER AS A SEPARATE LINE ITEM) MBLTT LITTLE TWO TIMER HOLE IN SERVICE DOOR (SPECIALS) $18.46 B MBTM5W SMALL TIME MASTER WINDOW $12.00 B MBTM5B BRACKET USED FOR MOUNTING TIME MASTER ON SERVICE DOOR $12.61 B MBTM5H HORN FOR TIME MASTER $23.00 B MBQ1 QUICK DISCONNECT ON WIRING TO REMOVE SERVICE DOOR $23.07 B MBXH LIGHT AND HOLE FOR X-TRA TIME $10.00 B PS200 PermaSwitch™ PS200 10 POSITION ELECTRONIC SWITCH INTERCHANGEABLE W/ ROTARY SWITCH $375.00 B MA72-P RELAY OUTPUT MODULE FOR PS200 $33.50 C

Page 17

MODEL NUMBER DESCRIPTION MSRP

DISC. CODE

**NEW** HIGH SECURITY METER BOXES WITH HEAVY DUTY WRAP COMPLETELY WIRED TO GIGA TIME 1200 TIMER, LAST ALERT HORN X10, HEATER, SNUBBER TERMINAL AND CUSTOM DECAL PATENT HIDDEN HINGED FRONT DOOR - U.S.A. PATENT #4,998,612 & #5,121,824 ROTARY SWITCH VAULTED READY HIGH SECURITY MODLES MB165 HIGH SECURITY METER IS COMPLETE W/ GIGA TIMER 1200 MULTI TIME TIMER, SCROLLING SERVICE $1699.99 E MESSAGES, LC525 ALERT HORN, X10 COIN XEPTOR, FULLY WIRED, W/ 8 POSITION ROTARY, SWITCH, SNUBBER TERMINAL HEATER, CUSTOM DECAL , 10 GAUGE STAINLESS STEEL METER AND TILT DOWN SERVICE DOOR, 2 PUCK STYLE LOCKS W / KEYS MOUNTED ON SERVICE DOOR WITH HIDDEN HINGE, 3/8” X 1 3/8” SECURITY WRAP, SIZE 16.25 ”W x 28” H x 8”D VAULT READY MB165-10 SAME FEATURES AS MB165 WITH 10 POSITION ROTARY SWITCH $1779.99 E MB165-12 SAME FEATURES AS MB165 WITH 12 POSITION ROTARY SWITCH $2092.57 E LIGHTED PUSH BUTTON VAULTED READY HIGH SECURITY METERS MB165-10P GIGA TIME COIN METER IS COMPLETE W/ GT1200 MULTI TIME TIMER, LC525 ALERT HORN, X10 $2621.50 E COIN XEPTOR, FULLY WIRED, WITH 10 LIGHTED S/S PUSH BUTTONS , MUX BOARD , SWITCH BOARD, HEATER, ST301 SNUBBER TERMINAL, CUSTOM DECAL , 10 GAUGE STAINLESS STEEL METER, 2 PUCK STYLE LOCKS W / KEYS MOUNTED ON TILT DOWN SERVICE DOOR WITH HIDDEN HINGE, 3/8” X 1 3/8” SECURITY WRAP, SIZE 16.25 ”W x 28” H x 8”D VAULT READY MB165-11P SAME FEATURES AS MB165-GT 10P BUT WITH 11LIGHTED S/S PUSH BUTTONS $2709.56 E MB165-12P SAME FEATURES AS MB165-GT 10P BUT WITH 12LIGHTED S/S PUSH BUTTONS $2797.62 E MB165-13P SAME FEATURES AS MB165-GT 10P BUT WITH 13LIGHTED S/S PUSH BUTTONS $2997.62 E MB165-14P SAME FEATURES AS MB165-GT 10P BUT WITH 14 LIGHTED S/S PUSH BUTTONS $3085.68 E ROTARY SWITCH CASH DRAWER METER BOXES MCD165 GIGA TIME COIN METER IS COMPLETE W/ GT1200 MULTI TIME TIMER, SCROLLING SERVICE $2204.47 E MESSAGES, LC525 ALERT HORN, X10 COIN XEPTOR, FULLY WIRED, WITH 8 POSITION 2 STACK ROTARY SWITCH, SNUBBER TERMINAL, HEATER, CUSTOM DECAL , 10 GAUGE STAINLESS STEEL METER, 2 PUCK STYLE LOCKS W / KEYS MOUNTED ON TILT DOWN SERVICE DOOR WITH HIDDEN HINGE, CASH DRAWER WITH AMERICAN LOCK AND WELDED SECURITY RING (HOLDS 6,000+ COINS) 3/8” X 1 3/8” SECURITY WRAP, SIZE 16.25 ”W x 34.25” H x 8”D MCD165-10 SAME FEATURES AS MCD165 BUT WITH 10 POSITION ROTARY SWITCH $2284.47 E MCD165-12 SAME FEATURES AS MCD165 BUT WITH 12 POSITION ROTARY SWITCH $2595.05 E LIGHTED PUSH BUTTON HIGH SECURITY CASH DRAWER MODLES MCD165-10P GIGA TIME COIN METER IS COMPLETE W/ GT1200 MULTI TIME TIMER, LC525 ALERT HORN, X10 $3125.98 E COIN XEPTOR, FULLY WIRED, WITH 10 LIGHTED S/S PUSH BUTTONS , MUX BOARD , SWITCH BOARD, HEATER, ST301 SNUBBER TERMINAL, CUSTOM DECAL , 10 GAUGE STAINLESS STEEL METER, 2 PUCK STYLE LOCKS W / KEYS MOUNTED ON TILT DOWN SERVICE DOOR WITH HIDDEN HINGE, CASH DRAWER WITH AMERICAN LOCK AND WELDED SECURITY RING (HOLDS 6,000+ COINS) 3/8” X 1 3/8” SECURITY WRAP, SIZE 16.25 ”W x 34.25” H x 8”D MCD165-11P SAME FEATURES AS MB165-GT 10P BUT WITH 11LIGHTED S/S PUSH BUTTONS $3214.04 E MCD165-12P SAME FEATURES AS MB165-GT 10P BUT WITH 12LIGHTED S/S PUSH BUTTONS $3302.10 E MCD165-13P SAME FEATURES AS MB165-GT 10P BUT WITH 13LIGHTED S/S PUSH BUTTONS $3524.00 E MCD165-14P SAME FEATURES AS MB165-GT 10P BUT WITH 14 LIGHTED S/S PUSH BUTTONS $3612.06 E OPTIONS 165 METERS -V CONVERT DOOR, DECALE AND WIRING TO ADD BILL ACCEPTOR $46.50 E -S UP GRADER WITH HIGH SECURITY STAINLESS STEEL PUCK LOCK EACH $72.96 E ** OTHER SIZES AND OPTIONS AVAILABLE - CONSULT IDX**

Page 18

MODEL NUMBER DESCRIPTION MSRP

DISC. CODE

METER BOX ACCESSORIES MSD100 REPLACEABLE SERVICE DOOR FOR MB & MCD METER BOXES WITH 1 CAM LOCK 7.875”W x 10.875”H $98.58 B MSDP100 REPLACEABLE SERVICE DOOR FOR MBP, MCDP, OR MCDA METER BOXES. LOCK NOT INCLUDED. $96.44 B MSD150 REPLACEABLE SERVICE DOOR FOR MB150 METER BOX. INCLUDES 2 CAM LOCKS. 9.25” x 13.75” H $143.65 B MSD155 REPLACEABLE SERVICE DOOR FOR MB155 METER BOX. INCLUDES 2 CAM LOCKS. 11.125 ”W x 15.25”H $165.05 B MSD155V REPLACEABLE SERVICE DOOR FOR MB155 BILL ACCEPTOR METER BOX. INCLUDES 2 CAM LOCKS. $241.83 B MSD155-VA-LOCK- SECURITY BAR DOOR LOCK BAR FOR MB155V METERS USED WITH PUCK STYLE LOCK (LOCK NOT $99.83 A KIT INCLUDED) MSD160-BT REPLACEABLE SERVICE DOOR FOR MB160 METER BOX. INCLUDES 2 PUCK LOCKS. 21.375”W x 15.875”H $374.71 B MSD160-GT REPLACEABLE SERVICE DOOR FOR MB160 METER BOX. INCLUDES 2 PUCK LOCKS. $351.13 B MSD165-??? REPLACEABLE SERVICE DOOR FOR MB165 PUSH BUTTON METER BOX. INCLUDES 2 PUCK LOCKS. $???? B MBS SHELL ONLY LESS SERVICE DOOR & WIRING HARNESS FOR MB100 METER BOX – SIZE 8”Hx11”Wx 5.75” $207.86 B MBPS SHELL ONLY LESS SERVICE DOOR & WIRING HARNESS FOR MBP100 METER BOX FOR PIN LOCK $229.30 B SIZE 8”W x 11”H x 5.75”D MBS150 SHELL ONLY LESS SERVICE DOOR & WIRING HARNESS FOR MB150 METER BOX – SIZE 9.5”H x 14”W x 8” $315.00 B MBS155 SHELL ONLY LESS SERVICE DOOR & WIRING HARNESS FOR MB155 & MB155V METER BOXES $413.04 B SIZE 11.25”W x 15.5”H x 8”D MBS155W SHELL ONLY LESS SERVICE DOOR & WIRING HARNESS FOR MB155 & MB155V METER BOXES $483.43 B SIZE 11.25”W x 15.5”H x 8”D WITH 3/8” SECURITY WRAP MBS160 SHELL ONLY LESS SERVICE DOOR & WIRING HARNESS FOR MB160 METER BOXES & IDX REVALUE $699.41 B KIOSK. SIZE 21.875” W x 16.063” H x 8” D WITH 3/8” x 1 3/8” SECURITY WRAP MBS165 SHELL ONLY LESS SERVICE DOOR & WIRING HARNESS FOR MB165 METER BOXES & IDX REVALUE $787.15 B KIOSK. SIZE 16.125” W x 21.875H x 8” D WITH 3/8” x 1 3/8” SECURITY WRAP MCDS SHELL WITH CD (CASH DRAWER) & CAM LOCK ONLY, LESS SERVICE DOOR & WIRING HARNESS $414.50 B FOR MCD METER BOX. SIZE 8”W x 15.5”H x 5.75”D MCDPS SHELL WITH VDP (VAULT DOOR) ONLY- LESS PIN LOCKS, LESS SERVICE DOOR & WIRING HARNESS $410.89 B FOR MCDP METER BOX SIZE 8”W x 15.5”H x 5.75”D MCDS150 SHELL & CASH DRAWER (CD150) LESS PUCK LOCK, SECURITY BAR, SERVICE DOOR & WIRING $570.83 B HARNESS FOR MCD150 METER BOX SIZE 9.5” W x 20”H x 8”D MCDS155 SHELL W/ CASH DRAWER & PUCK LOCK, LESS SERVICE DOOR & WIRING HARNESS FOR MCD155 $630.00 B OR MCD155V METER BOX. SIZE 11.25”W x 21.5”H x 8”D MCDS165 SHELL W/ CASH DRAWER & PUCK LOCK, LESS SERVICE DOOR & WIRING HARNESS FOR MCD165 $???? B OR MCD165V METER BOX. SIZE 16.125”W X 34.25”H x 8”D MBWH WIRING HARNESS FOR 100 SERIES METER BOXES WITH 8 POSITION 2 STACK ROTARY SWITCH $53.42 B MBWH-10 WIRING HARNESS FOR 100 SERIES METER BOXES WITH 10 POSITION 2 STACK ROTARY SWITCH $91.27 B MBWH-10F WIRING HARNESS FOR 100 SERIES METER BOXES WITH 10 POSITION 2 STACK ROTARY SWITCH $112.31 B WIRED TO FANNING STRIP MBWH-10/3 WIRING HARNESS FOR 100 SERIES METER BOXES WITH 10 POSITION 3 STACK ROTARY SWITCH $152.89 B MBWH-150 WIRING HARNESS FOR 150 SERIES METER BOXES WITH 8 POSITION 2 STACK ROTARY SWITCH $55.97 B MBWH-150/10 WIRING HARNESS FOR 150 & 155 SERIES METER BOXES W/10 POSITION 2 STACK ROTARY SWITCH $96.55 B MBWH-150/10/3 WIRING HARNESS FOR 150 & 155 SERIES METER BOXES W/10 POSITION 3 STACK ROTARY SWITCH $152.89 B MBWH-150/10F WIRING HARNESS FOR 150 & 155 SERIES METER BOXES W/ 10 POS. 2 STACK ROTARY SWITCH $117.92 B WIRED TO FANNING STRIP MBWH-150/12 WIRING HARNESS FOR 150 & 155 SERIES METER BOXES W/12 POSITION 2 STACK ROTARY SWITCH $288.08 B MBWH-150/3 WIRING HARNESS FOR 150 & 155 SERIES METER BOXES W/8 POSITION 3 STACK ROTARY SWITCH $83.69 B MBWH-150/3F WIRING HARNESS FOR 150 & 155 SERIES METER BOXES W/8 POSITION 3 STACK ROTARY SWITCH $101.64 B & METAL FANNING STRIP MBWH-150/F WIRING HARNESS FOR 150 & 155 SERIES METER BOXES W/ 8 POSITION 2 STACK ROTARY SWITCH $74.92 B & METAL FANNING STRIP MBWH-160/10 WIRING HARNESS FOR 160 SERIES METER BOXES WITH 10 POSITION 2 STACK ROTARY SWITCH & $134.83 B ST301 SNUBBER TERMINAL MBWH-2F WIRING HARNESS FOR 100 SERIES METER BOXES WITH 8 POSITION 3 STACK ROTARY SWITCH & $74.16 B METAL FANNING STRIP MBWH-PUSH WIRING HARNESS FOR 19MM LIGHTED PUSH BUTTON SWITCH $13.25 B

BUTTON WIRING

Page 19

MODEL NUMBER DESCRIPTION MSRP

DISC. CODE

METER BOX ACCESSORIES MBWH-3 WIRING HARNESS FOR 100 SERIES METER BOXES WITH 8 POSITION 3 STACK ROTARY SWITCH $80.57 B MBWH-3F WIRING HARNESS FOR 100 SERIES METER BOXES WITH 8 POSITION 3 STACK ROTARY SWITCH $101.94 B FANNING STRIP MBWH-N1 WIRING HARNESS W/POWER SUPPLY FOR N1 38660KIT 1 PULSE OUT CREDIT CARD READER $61.32 D MBWH-PS WIRING HARNESS FOR 100 SERIES METER BOXES WITH PS200 ELECTRONIC SWITCH $59.04 B MBWH-PSF WIRING HARNESS FOR 100 SERIES METER BOXES WITH PS200 ELECTRONIC SWITCH & METAL $85.09 B FANNING STRIP MBWH-PSF/150 WIRING HARNESS FOR 150 & 155 METER BOXES WITH PS200 ELECTRONIC SWITCH & METAL $85.09 B FANNING STRIP MCB ***DISCONTINUED* CD SCREW LOCK CASH DRAWER FOR MCD100 METER BOX WITH SCREW LOCK $81.14 B VDP VAULT DOOR FOR MCDP100 PIN LOCK METER BOX $73.60 B VAL PUCK LOCK VAULT DOOR FOR MCDA100 METER BOXES ROUND COVER $81.14 B CD150 SCREW LOCK CASH DRAWER WITH LOCK FOR MCD150 METER BOX $122.18 B CD155 PUCK LOCK CASH DRAWER WITH PUCK LOCK FOR MCD155 AND MCD155V METER BOX $274.15 B CD165 PUCK LOCK CASH DRAWER WITH PUCK LOCK FOR MCD165 AND MCD165V METER BOX $???? B MSD155-VA-LOCK- SECURITY BAR DOOR LOCK BAR FOR MB155V METERS USED WITH STYLE LOCK (LOCK NOT $99.83 A KIT INCLUDED) SAFES KEYLESS & KEY STYLE SAFES WS1 ELECTRONIC STAINLESS STEEL SAFE. DOOR HAS NO LOCKS TO OIL, OR KEYS TO LOSE. $581.48 A BREAKAWAY HANDLE. 3/8” THICK STAINLESS STEEL DOOR ATTACHED TO REMOVABLE CASH DRAWER (HOLDS 5000+ COINS - $1,250.00). SIZE 8”H x 8” W x 12”D WITH 8”H x 12” W PLATE WS1-DRAWER STAINLESS STEEL SAFE DRAWER FOR WS1 $312.50 A WS1-SHELL STAINLESS STEEL SHELL WITH ELECTRONICS FOR WS1 SAFE $333.34 A WS1-SOLENOID 24VAC SOLENOID FOR WS1 SAFE $C/F A MB199-23 ELECTRONIC KEY SWITCH LOCK – N/O CONTACTS- WITH 2 KEYS $44.15 A DS1 CONSULT FACTORY FOR PRICING C/F DS1-DRAWER CONSULT FACTORY FOR PRICING C/F DS1-SHELL CONSULT FACTORY FOR PRICING C/F MB199-17 MEDICO LOCK WITH 1 KEY FOR DS1 SAFE $42.44 A SS84315 “T” HANDLE 3/8” HEX KEY ALLEN WRENCH FOR DS1 SAFE $25.64 C MODEL #WS1 MODEL #DS1

Page 20

MODEL NUMBER DESCRIPTION MSRP

DISC. CODE

DIGITAL CLOCK TIMER FOR METER BOXES “CARD DISPLAY PROTOCOL™” STANDARD, U.S. PATENT #5,371,681

LITTLE TWO TIMER™ LTT802 LITTLE TWO TIMER *** OBSOLETE *** REPLACED WITH GT 200 LTT802-HP LITTLE TWO TIMER *** OBSOLETE *** REPLACED WITH GT 200 LTT802-FHP LITTLE TWO TIMER *** OBSOLETE *** REPLACED WITH GT 200 GIGIA TIME™ GT 200 THE NEW GIGA TIMER GT200 IS A COMPACT DIRECT FIELD REPLACEMENT MULTI-FEATURE $299.96 E DISPLAY TIMER WHICH HAS MANY FEATURES INCLUDING INDUSTRY STANDARD METER BOX FOOT PRINT, MULTI-VALUE TIMING W/ COUNT-DOWN OR UP MODE, IDX “CARD-DISPLAY PROTOCOL” & IDX PATENTED TWO TIME SELECT FEATURE. THIS NEW MODEL EXHIBIT’S 20% + REDUCTION IN POWER CONSUMPTION OVER THE LTT802 SERIES AND SIMILAR DISPLAY TIMERS. 2-YEAR WARRANTY ON STANDARD HIGH OUTPUT LEDS. - ALL WITH 3 BRIGHTNESS SETTINGS THAT ARE FIELD PROGRAMMABLE. THE LED’S BRIGHTEN UP WHEN THE TIMER SCENES COIN ACTIVITY AND AT THE LAST MINUTES OF TIME. THE 3 FIELD PROGRAMMABLE MESSAGES HAVE BEEN EXPANDED TO 127 CHARACTERS EACH. MONETARY VALUES ARE SELECTED DURING PROGRAMMING FROM $ or € AND COIN BASE IS 0.05 / 0.25 / 0.50 / 1.00. STANDARD OPERATING VOLTAGE IS 24VAC / 12VDC / 12VAC / 24VDC / 34VDC WITH A 3 AMP FUSED RELAY OUTPUT. HORN OUTPUT SELECTABLE EITHER 10 SECONDS OR FOR THE FULL LAST MINUTE. ACCOUNTING FEATURES ARE TOTAL COIN COUNT, TOTAL RUN TIME SEPARATED BY THE 2 TIME SELECT MODE “A” & “B” TIMES. SIZE 3.35”W x 3.80”H x 3.15”D GT 200-A GT 200 TWO TIMER W/ PATENT PENDING “LUCKY TIME”, LATCH / UNLIMITED TIME PROGRAM $374.96 E INCLUDES THE DISABLE FEATURE COIN /BILL ACCEPTOR WHILE IN THE UNLIMITED MODE OR IF OUTPUT FAILS. ADDITIONAL INPUTS ARE BILL ACCEPTANCE, CREDIT CARD PULSE, 4 TIME INPUT SERVICES, WITH 2 OPTIONAL INPUTS FOR SPECIAL FEATURES. ADDITIONAL ACCOUNTING FEATURES - TOTAL BILL COUNTS IN DOLLARS, TOTAL CREDIT CARD COUNTS IN DOLLARS & CENTS AND TOTAL TIME FOR EACH OF THE ADDITIONAL SERVICES FEATURES IN HOURS & MINUTES. **SPECIAL** GIGA TIMER DIGITAL CLOCK TIMERS FOR METER BOXES LTT802V THE FIRST DIGITAL DISPLAY TIMER DESIGNED TO CONTROL UP TO 7 DIFFERENT ELECTRONIC $428.26 E VENDOR SHELVES. DESIGNED TO BE MOUNTED IN THE STANDARD 2”W x 3”H HOLE PATTERN METER BOX. COIN BEEPER OUTPUT IS INCLUDED. IF PRODUCT IS EMPTY, COIN XEPTOR IS DISABLED & SCROLLS “’PRODUCT NAME’ IS EMPTY MAKE A DIFFERENT SELECTION”. SCROLLS PRICING & PRODUCT NAME (PROGRAMMABLE- 30 DIFFERENT CHARACTERS FOR EACH PRODUCT, SUN LIGHT READABLE LED’S - INCLUDES –A OPTION. SIZE 3.35”W x 3.80”H x 3.15”D MA-VEND12DC WIRING & 12VDC POWER INTERFACE MODULE FOR LAUREL ELECTRONIC DROP SHELF VENDOR, 1 $58.00 C PER SHELF REQUIRED MA-VEND24AC WIRING & 24VAC POWER INTERFACE MODULE FOR LAUREL ELECTRONIC DROP SHELF VENDOR, 1 $58.00 C PER SHELF REQUIRED GT 200-A MULTI –TIME 10 TIMER WITH UP TO 10 DIFFERENT 32 CHARATOR SCROLLING MESSAGES $374.96 E IDEAL FOR COMBO VAC,PET WASHES OR BAYS THAT NEED MULTIPLE SERVICES AT DIFFERENT TIME RATES. COIN IN BEEPER OUTPUT, BILL AND CREDIT CARD INPUTS PUSH BUTTON CONTROLS GT 200 MUX MULTI PLES ASSLEMABLY FOR UPTO 12 LIGHTED PUSH BUTTONS WITH 13 RELAY OUTPUTS, $365.00 C FOR 12 SERVICE FUNCTIONS AND 1 MOTOR STARTER- PROGRAMMED WITH DIP SWITCHS, PUSH BUTTON BOARD, AND SERIAL CONNECTION FOR GT 200-A OR GT1200 GIGA TIMERS GT 200 M-BOX SWITCH BOX FOR GT 200 MUX $33I.66 C GT 200 MSB SWITCH BOARD FOR GT 200 MUX WITH 12 BUTTON CONNECTORS AND SERIAL CONNECTOR $75.00 C *** CONSULT FACTORY FOR DIFFERENT CONFIGUARATIOND***

Page 21

MODEL NUMBER DESCRIPTION MSRP

DISC. CODE

Giga Time™ U.S. PATENT #5,371,681

ULTIMATE IN MULTI TIME DISPLAY TIMERS FOR METERS OR VACUUMS GIGA TIMER-1200 GIGA TIME IS THE ULTIMATE IN MULTI TIME TIMER TECHNOLOGY. SUPER ULTRA BRIGHT RED LEDS, $594.24 E 1”H x 5.5”W OPENING EASIER TO READ SCROLLING LETTERS BECAUSE OF THE DUAL ROW LED LETTERING, 4 STANDARD SETTINGS FOR TIME AND/OR COINS ON 4 DIFFERENT SERVICE INPUTS, 2 OPTIONAL TIME/COIN PROGRAMMING SETTINGS, 12 PROGRAMMABLE SERVICES 30 CHARACTER SERVICE MESSAGES, SERVICES LIKE “WASH / RINSE / TRIPLE FOAM / etc”, GIGA TIME – “LATCH TIME, BONUS TIME, UNLIMITED TIME, MEGA TIME” WHAT EVER NAME YOU CALL IT, “LUCKY TIME™” PROGRAM, COIN IN BEEP, PROGRAMMABLE LENGTH ON LAST COIN ALERT FROM 1 SECOND TO THE FULL LAST “CARD DISPLAY PROTOCOL”™, 1 COIN &/OR TOKEN INPUT, 1 BILL INPUT, SEPARATE RETRIEVABLE COUNTS, HORN OUTPUT, REMOTE RESET INPUT WIRE, CREDIT CARD SERIAL PORT, PROGRAM PORT FOR RC800 REMOTE OR WT RAM , SIZE 3.125”H x 5.875”W X 1.78”D. ACCESSORY MODULES FOR GIGA TIMER GT1200 & GT200 LC LAST ALERT HORN MULTI VOLTAGE 9-34 AC/DC 2-YEAR WARRANTY $41.67 C LC521-AC LAST MINUTE ALERT PLUG-IN TYPE, USES DS508 SOCKET (A/C TYPE FOR 24VAC ONLY) $80.00 C DS508 PLUG IN BASE FOR LC521-AC HORN $5.83 C LC525-AC SAME AS LC521-AC W/ NO PLUG-IN HOUSING. INCLUDES “L” BRACKET FOR MOUNTING. $41.67 C ACCESSORY PARTS FOR LTT802, GIGA TIMER GT1200 & GT200 GIGA -1200MP STAINLESS STEEL MOUNTING PLATE SIZE 3.125”H x 6.94”W $11.69 B GIGA –WHP1 GIGA TIMER #1 POWER WIRING HARNESS $16.59 C GIGA –WHP2 GIGA TIMER #2 POWER WIRING HARNESS $16.59 C GIGA –WHP3 GIGA TIMER #3 POWER WIRING HARNESS $16.59 C GIGA –WHP4 GIGA TIMER #4 POWER WIRING HARNESS $16.59 C GIGA TIMER-13 GIGA TIMER RED ENCLOSURE LESS MOUNTING BRACKET $40.95 C IRM800 INFRARED RECEIVER FOR IR800 TO CONVERT IDX DISPLAYS / DISPLAY TIMERS FOR USE WITH $53.82 B INFRARED REMOTE CONTROL. LTT8H STAINLESS STEEL ENCLOSURE WITH LIFT OUT DOOR & CAM LOCK SIZE – 6” H x 5 .563” W x 5” D $100.00 B LTT10 RED ACRYLIC LENS FOR FACE OF THE LTT800 & LTT802 $4.95 C LTT11 LTT HOUSING – COMPLETE (RED LEXAN®) $10.00 C LTT11-FC LTT HOUSING FRONT COVER WITH 4 POSTS (RED LEXAN) $6.66 C LTT11-H LTT HOUSING LESS FRONT COVER (RED LEXAN) $8.33 C LTT20 EEPROM WITH MESSAGE PLUG-IN $20.00 C LTT30 MICROPROCESSOR CHIP FOR LTT800 & LTT802 $68.33 C LTT41-P1 WIRING HARNESS FOR P-1 HOOK-UP ON LTT SERIES $15.31 B LTT41-P3 WIRING HARNESS FOR P-3 HOOK-UP ON LTT SERIES WITH DISABLE (-D) OPTION $15.31 B LTT41-P3S WIRING HARNESS FOR P-3 HOOK-UP ON LTT SERIES WITH ALL OPTIONS $16.85 B LTT51 HIGH OUTPUT LED SEGMENT FOR LTT800 & LTT802 $21.67 C

GT200

Page 22

MODEL NUMBER DESCRIPTION MSRP

DISC. CODE

SPARE PARTS FOR METER BOXES MB199-S STAINLESS STEEL SECURITY BAR FOR MB100, MBP100, MCD100, & MCP100 METER BOXES $23.08 B MB199-S150 STAINLESS STEEL SECURITY BAR FOR MB150 & MCD150 METER BOXES $24.36 B MB199-S155 STAINLESS STEEL SECURITY BAR FOR MB155, MCD155, MB155V, & MCD155V METER BOXES $27.22 B MB199-S155W STAINLESS STEEL SECURITY BAR FOR MB155W, MCD155W, MB155WV, & MCD155WV METER BOXES $32.54 B MB199-2M METAL 2 STACK 8 POSITION ROTARY SWITCH $35.90 B MB199-2M10 METAL 2 STACK 10 POSITION ROTARY SWITCH $84.00 B MB199-2M12 METAL 2 STACK 12 POSITION ROTARY SWITCH $C/F B MB199-3M METAL 3 STACK 8 POSITION ROTARY SWITCH $56.78 B MB199-3M10 METAL 3 STACK 10 POSITION ROTARY SWITCH $129.95 B MB199-3 TUBULAR CAM LOCK WITH 1 KEY $15.38 A MB199-3K KEY FOR TUBULAR CAM LOCK $5.00 A MB199-3S MEDICO TUBULAR CAM LOCK WITH 1 KEY FOR HIGHER SECURITY $43.50 A MB199-3V TUBULAR CAM LOCK WITH 1 KEY AND SPECIAL KEY NUMBERS $15.38 A MB199-4 TUBULAR SCREW LOCK WITH 1 KEY $18.93 A MB199-4K KEY FOR TUBULAR SCREW LOCK $5.00 A MB199-4-150 LONG SHANK TUBULAR SCREW LOCK WITH 1 KEY FOR MCD150 $18.93 A

***FOR SPECIAL ORDER KEY NUMBERS OR LOCKS ADD $5.00 EACH*** $5.00 NET

MB199-4N NUT & CLIP TO BE MOUNTED IN METER BOX FOR SCREW LOCK $2.30 D MB199-7 WILSON BUCHANAN PIN LOCK WITH 1 KEY $19.68 A MB199-7K KEY FOR WILSON BUCHANAN PIN LOCK $5.00 A MB199-7P WILSON BUCHANAN PIN LOCK WITH PIN INCLUDED $21.59 A MB199-8 HEATER, 24 VAC, 25 WATTS $12.50 D MB199-9 12 LUG TERMINAL STRIP 20 AMP $3.25 D MB199-10 18 LUG TERMINAL STRIP 20 AMP $6.50 D MB199-12 POINTER KNOB FOR 8 OR 10 POSITION ROTARY SWITCHES $3.85 D MB199-13 AMERICAN LOCK 2000 SERIES WITH 2 KEYS $45.30 A MB199-13I AMERICAN LOCK INSERT WITH 2 KEYS $22.83 A MB199-13K KEY FOR AMERICAN LOCK 2000 SERIES (SPECIAL ORDER) $5.00 A MB199-13M AMERICAN LOCK 2000 SERIES MOUNTED ON METER BOX $45.30 A MB199-13SS STAINLESS STEEL HIGH SECURITY PUCK STYLE LOCK WITH 2 KEYS $114.30 A MB199-14 ***OBSOLETE*** MB199-14L ***OBSOLETE*** MB199-15 SET OF CIRCULAR SPOTS FOR MB 199-14 (13 SERVICE SPOTS & 5 PRICE) $8.79 D MB199-16 SET OF CIRCULAR SPOTS FOR DEC100 & DEC200 $12.49 D MB199-17 MEDICO LOCK WITH 1 KEY (PLUG ONLY) $42.44 A MB199-17K MEDICO KEY FOR MB199-17 (PLUG LOCK) $8.46 A MB199-18 MEDICO SCREW LOCK WITH 1 KEY $44.15 A MB199-19A AMBER INDICATOR LIGHT 120VAC $4.71 B MB199-19G GREEN INDICATOR LIGHT 120 VAC $4.71 B MB199-19R RED INDICATOR LIGHT 120 VAC $4.71 B MB199-20A AMBER INDICATOR LIGHT 24 VAC $3.30 B MB199-20G GREEN INDICATOR LIGHT 24 VAC $3.30 B MB199-20R RED INDICATOR LIGHT 24 VAC $3.30 B MB199-22 PLASTIC COIN CATCHER $2.50 B MB199-23 ELECTRONIC KEY SWITCH LOCK – N/O CONTACTS- WITH 2 KEYS $44.15 A MB199-51 CONTROL CABLE / 2-TWISTED PAIRS OF SHIELDED ALL COPPER CABLE sold by the foot $1.16 A PUSH BUTTONS LIGHTED MB199-PRW-16G 16 MM GREEN LIGHTED S/S PUSH BUTTON W/WIRES & CONNECTOR FOR GT-PUSH BUTTON BOARD $23.08 D MB199-PRW-16R 16 MM RED LIGHTED S/S PUSH BUTTON W/WIRES & CONNECTOR FOR GT-PUSH BUTTON BOARD $29.23 D MB199-SWL19G 19 MM GREEN LIGHTED S/S PUSH BUTTON PUSH ON OR SOLDER ENDS $47.92 D MB199-SWL19R 19 MM RED LIGHTED S/S PUSH BUTTON PUSH ON OR SOLDER ENDS $47.92 D MBWH-PUSH WIRING HARNESS FOR 19MM LIGHTED PUSH BUTTON SWITCH $13.25 B BUTTON WIRING

Page 23

MODEL NUMBER DESCRIPTION MSRP

DISC. CODE

TERMINAL STRIPS SNUBBERS & SNUBBER TERMINAL BLOCKS

MBI99-26 12 LUG TERMINAL STRIP 30 AMP $4.95 B MB199-27 14 LUG TERMINAL STRIP 30 AMP $5.95 B MB199-28 16 LUG TERMINAL STRIP 30 AMP $6.95 B ST1.0 1.0 µF AND 4.7 OHM ¼ WATT RESISTOR $1.00 C ST022 .022 µF AND 100 OHM ¼ WATT RESISTOR $1.00 C ST047 .047 µF AND 20 OHM ¼ WATT RESISTOR $1.00 C ST39 SNUBBER TERMINAL $1.00 C ST100 12 POSITION TERMINAL BLOCK WITH BUILT IN SNUBBERS TO ELIMINATE VOLTAGE SPIKING $20.00 C ST200 14 POSITION TERMINAL BLOCK WITH BUILT IN SNUBBERS TO ELIMINATE VOLTAGE SPIKING $28.35 C ST300 16 POSITION TERMINAL BLOCK WITH BUILT IN SNUBBERS TO ELIMINATE VOLTAGE SPIKING $29.95 C ST301 SAME AS ST300 PLUS COIN SIGNAL BLOCK ON BILL ACCEPTOR LINE FOR VAC UP SYSTEMS $38.28 C ST316 16 POSITION TERMINAL BLOCK WITH 16 SNUBBERED TERMINALS $41.66 C ST500 BLUE VARISTOR CLAMP OFF AT 130 $1.00 C ST510 RED VARISTOR CLAMP OFF AT 390 $1.00 C CP105 1.0 µF 250 VOLT CAPACITOR $1.00 C DECALS FOR METER BOXES DEC100 MULTI COLORED SERVICE DOOR DECAL THAT COVERS AND PROTECTS FOR 8 POSITION SWITCH $40.87 D DEC100-10 MULTI COLORED SERVICE DOOR DECAL THAT COVERS AND PROTECTS FOR 10 POSITION SWITCH $40.87 D DEC100-C CUSTOM DECALS FOR THE MB100 / MBP100 /MCD100 / MCDP100 METER BOXES $46.15 D DEC150 MULTI COLORED SERVICE DOOR DECAL THAT COVERS AND PROTECTS FOR 8 POSITION SWITCH $46.82 D DEC150-10 MULTI COLORED SERVICE DOOR DECAL THAT COVERS AND PROTECTS FOR 10 POSITION SWITCH $46.82 D DEC150-C CUSTOM DECALS FOR THE MB150 / MCD150 METER BOXES $52.30 D DEC155 MULTI COLORED SERVICE DOOR DECAL THAT COVERS AND PROTECTS FOR 10 POSITION SWITCH $47.57 D FOR MB155, MB155W & MCD155 METERS DEC155V MULTI COLORED SERVICE DOOR DECAL THAT COVERS AND PROTECTS FOR 10 POSITION SWITCH & $47.57 D BILL ACCEPTOR FOR MB155V, MB155WV & MCD155V METERS DEC155-VPET MULTI COLORED FULL FACE SERVICE DOOR DECAL FOR MCD155V METER SET UP FOR PET WASH $47.57 D DEC155-C CUSTOM DECAL FOR THE MB155 / MB155V / MCD155 /MCD155V METER BOXES $58.46 D DEC160 MULTI LANGUAGE INSTRUCTION DECAL FOR MB160-BT & MB160-GT $49.42 D DEC160-BV BILL ACCEPTOR INSET FOR THE MB160 METERS $22.97 D DEC165-C CUSTOM DECAL FOR MB165 METERS $C/F D DEC315 CUSTOM NAME INSERTS FOR DEC100, DEC150 & DEC155 $C/F D (300 PIECES MINIMUM ORDER PLUS ONE TIME ART/PLATE CHARGE OF $150.00) DEC200 MULTI COLORED SERVICE DOOR DECAL THAT COVERS AND PROTECTS FOR 8 POSITION SWITCH $35.85 D SET UP FOR “DON R HAVENS” METERS WITH 1 OR 2 COIN XEPTORS DECPS200 MULTI COLORED PermaSwitch PS200® DECAL WITH SERVICE SPOTS ONLY $21.97 D MB199-14 *******DISCONTUNED******** MB199-15 SET OF CIRCULAR SPOTS & PRICES FOR MB199-14 AND MB199-14L $8.79 D MB199-16 SET OF CIRCULAR SPOTS & PRICES FOR DEC100, DEC150, DEC155, & DEC200 $12.49 D DECALS FOR METER BOXES BS WR2 WICKET METER BOX DECAL “ TAP CARD HERE” SIZE 1.5” x 1.5” $2.58 D BS200/15 SET OF 15 CIRCULAR SPOTS (0.65”) FOR DECPS200 $13.84 D BS200-WS 0.65” ORANGE “WASH/SOAP” SPOT FOR METER DECALS $0.93 D BS200-ABD 0.65” BLUE “AIR BLOW DRY” SPOT FOR METER DECALS $0.93 D BS200-RN 0.65” WHITE “RINSE” SPOT FOR METER DECALS $0.93 D BS200-HW 0.65” GREEN “HIGH PRESSURE WAX” SPOT FOR METER DECALS $0.93 D BS200-CCP 0.65” GREEN “CLEAR COAT PROTECTANT” SPOT FOR METER DECALS $0.93 D BS200-FW 0.65” GREEN “LOW PRESSURE FOAM WAX” SPOT FOR METER DECALS $0.93 D BS200-OFF 0.65” RED “OFF” SPOT FOR METER DECALS $0.93 D BS200-STP 0.65” RED “STOP” SPOT FOR METER DECALS $0.93 D BS200-ET 0.65” YELLOW “ENGINE/TIRE CLEANER” SPOT FOR METER DECALS $0.93 D

Page 24

MODEL NUMBER DESCRIPTION MSRP

DISC. CODE

DECALS FOR METER BOXES BS200-EC 0.65” YELLOW “ENGINE CLEANER” SPOT FOR METER DECALS $0.93 D BS200-TC 0.65” YELLOW “TIRE CLEANER” SPOT FOR METER DECALS $0.93 D BS200-FB 0.65” BLUE “FOAM BRUSH” SPOT FOR METER DECALS $0.93 D BS200-PS 0.65” PINK “PRESOAK” SPOT FOR METER DECALS $0.93 D BS200-SFR 0.65” ROSEMAN RED “SPOT FREE RINSE” SPOT FOR METER DECALS $0.93 D BS200-MCB 0.65” BLUE “MULTI-COLOR FOAM BRUSH” SPOT FOR METER DECALS $0.93 D BS200-MCP 0.65” GREEN “MULTI-COLOR FOAM PROTECTANT” SPOT FOR METER DECALS $0.93 D BS513 1 ¾” x 2 1/8” “DOLLARS ONLY” DECAL FOR METER BOXES $3.65 D BS514 1 ¾” x 2 1/8” “QUARTERS OR DOLLARS” DECAL FOR METER BOXES $3.65 D BS515 1 ¾” x 2 1/8” “TOKENS OR DOLLARS” LEXAN DECAL FOR METER BOXES $3.65 D BS516 1 ¾” x 2 1/8” “TOKEN / QUARTER / DOLLAR” LEXAN DECAL FOR METER BOXES $3.65 D BS517 7 ½” x 11 ½” LEXAN “EXTRA TIME” SIGN FOR MOUNTING IN BAY $18.83 D BS518 1 ¾” x 2 1/8” “TOKEN ONLY” LEXAN DECAL FOR METER BOXES $3.65 D BS519 2” x 3” “X-TRA TIME” DECAL FOR METER BOX $3.65 D BS520 3” x 3” “LAST COIN ALERT” DECAL FOR METER BOX $3.65 D BS521 1 ¾” x 2 1/8” “QUARTERS ONLY” LEXAN DECAL FOR METER BOXES $3.65 D BS522 1 ¾” x 2 1/8” “TOKEN & QUARTERS” LEXAN DECAL FOR METER BOXES $3.65 D BS523-ABD 7/8” BLUE “AIR BLOW DRY” SPOT FOR METER DECALS $0.68 D BS523-WS 7/8” ORANGE “WASH/SOAP” SPOT FOR METER DECALS $0.68 D BS523-RN 7/8” WHITE “RINSE” SPOT FOR METER DECALS $0.68 D BS523-HW 7/8” GREEN “HIGH PRESSURE WAX” SPOT FOR METER DECALS $0.68 D BS523-CCP 7/8” GREEN “CLEAR COAT PROTECTANT” SPOT FOR METER DECALS $0.68 D BS523-FW 7/8” GREEN “LOW PRESSURE FOAM WAX” SPOT FOR METER DECALS $0.68 D BS523-OFF 7/8” RED “OFF” SPOT FOR METER DECALS $0.68 D BS523-STP 7/8” RED “STOP” SPOT FOR METER DECALS $0.68 D BS523-ET 7/8” YELLOW “ENGINE/TIRE CLEANER” SPOT FOR METER DECALS $0.68 D BS523-EC 7/8” YELLOW “ENGINE CLEANER” SPOT FOR METER DECALS $0.68 D BS523-TC 7/8” YELLOW “TIRE CLEANER” SPOT FOR METER DECALS $0.68 D BS523-FB 7/8” BLUE “FOAM BRUSH” SPOT FOR METER DECALS $0.68 D BS523-PS 7/8” PINK “PRESOAK” SPOT FOR METER DECALS $0.68 D BS523-SFR 7/8” ROSEMAN RED “SPOT FREE RINSE” SPOT FOR METER DECALS $0.68 D BS523-BNK 7/8” DARK BLUE BLANK FOR METER DECALS $0.68 D BS523-MCB 7/8” BLUE “MULTI-COLOR FOAM BRUSH” SPOT FOR METER DECALS $0.68 D BS523-MCP 7/8” GREEN “MULTI-COLOR FOAM PROTECTANT” SPOT FOR METER DECALS $0.68 D BS524 7/8” “LAST COIN ALERT” INSERT FOR DEC100 OR DEC150 DECAL $0.68 D BS525 7/8” CIRCULAR INSERT FOR DEC100 “TOKENS OR QUARTERS” $0.68 D BS526 7/8” CIRCULAR INSERT FOR DEC100 “TOKENS ONLY” $0.68 D BS530 SET OF 5 PRICE SPOTS FOR MB199-14 & MB199-14L $2.77 D BS532 SET OF 6 PRICE SPOTS FOR DEC100, DEC150, DEC155, & DEC200 DECALS $7.40 D BS532-12L SET OF 12 PRICE SPOTS FOR DEC100, DEC150, DEC155, & DEC200 DECALS FROM $0.50 THRU $3.25 $14.80 D BS532-12H SET OF 12 PRICE SPOTS FOR DEC100, DEC150, DEC155, & DEC200 DECALS FROM $2.25 THRU $5.00 $14.80 D METER BOX PRICE SPOTS BS532-050 2 1/8” “50¢” PRICE SPOT FOR DEC100, DEC150, DEC155 & DEC200 DECALS $1.76 D BS532-075 2 1/8” “75¢” PRICE SPOT FOR DEC100, DEC150, DEC155 & DEC200 DECALS $1.76 D BS532-100 2 1/8” “$1.00” PRICE SPOT FOR DEC100, DEC150, DEC155 & DEC200 DECALS $1.76 D BS532-125 2 1/8” “$1.25” PRICE SPOT FOR DEC100, DEC150, DEC155 & DEC200 DECALS $1.76 D BS532-150 2 1/8” “$1.50” PRICE SPOT FOR DEC100, DEC150, DEC155 & DEC200 DECALS $1.76 D BS532-175 2 1/8” “$1.75” PRICE SPOT FOR DEC100, DEC150, DEC155 & DEC200 DECALS $1.76 D BS532-200 2 1/8” “$2.00” PRICE SPOT FOR DEC100, DEC150, DEC155 & DEC200 DECALS $1.76 D BS532-225 2 1/8” “$2.25” PRICE SPOT FOR DEC100, DEC150, DEC155 & DEC200 DECALS $1.76 D BS532-250 2 1/8” “$2.50” PRICE SPOT FOR DEC100, DEC150, DEC155 & DEC200 DECALS $1.76 D BS532-275 2 1/8” “$2.75” PRICE SPOT FOR DEC100, DEC150, DEC155 & DEC200 DECALS $1.76 D BS532-200 2 1/8” “$2.00” PRICE SPOT FOR DEC100, DEC150, DEC155 & DEC200 DECALS $1.76 D BS532-225 2 1/8” “$2.25” PRICE SPOT FOR DEC100, DEC150, DEC155 & DEC200 DECALS $1.76 D

Page 25

MODEL NUMBER DESCRIPTION MSRP

DISC. CODE

METER BOX PRICE SPOTS BS532-250 2 1/8” “$2.50” PRICE SPOT FOR DEC100, DEC150, DEC155 & DEC200 DECALS $1.76 D BS532-275 2 1/8” “$2.75” PRICE SPOT FOR DEC100, DEC150, DEC155 & DEC200 DECALS $1.76 D BS532-300 2 1/8” “$3.00” PRICE SPOT FOR DEC100, DEC150, DEC155 & DEC200 DECALS $1.76 D BS532-325 2 1/8” “$3.25” PRICE SPOT FOR DEC100, DEC150, DEC155 & DEC200 DECALS $1.76 D BS532-350 2 1/8” “$3.50” PRICE SPOT FOR DEC100, DEC150, DEC155 & DEC200 DECALS $1.76 D BS532-375 2 1/8” “$3.75” PRICE SPOT FOR DEC100, DEC150, DEC155 & DEC200 DECALS $1.76 D BS532-400 2 1/8” “$4.00” PRICE SPOT FOR DEC100, DEC150, DEC155 & DEC200 DECALS $1.76 D BS532-425 2 1/8” “$4.25” PRICE SPOT FOR DEC100, DEC150, DEC155 & DEC200 DECALS $1.76 D BS532-450 2 1/8” “$4.50” PRICE SPOT FOR DEC100, DEC150, DEC155 & DEC200 DECALS $1.76 D BS532-475 2 1/8” “$4.75” PRICE SPOT FOR DEC100, DEC150, DEC155 & DEC200 DECALS $1.76 D BS532-500 2 1/8” “$5.00” PRICE SPOT FOR DEC100, DEC150, DEC155 & DEC200 DECALS $1.76 D STAINLESS STEEL LIGHTED MENU FRAMES MS302 STAINLESS STEEL SELECTIVE LIGHTED FRAME FOR 8 POSITION ROTARY SWITCH WITH CAM LOCK $381.45 B AND REMOVABLE DOOR (USE WITH MS100 OR MS100-W) 8 INDIVIDUAL 24VAC LIGHTS TO ILLUMINATE EACH SPOT WHEN CUSTOMER TURNS THE ROTARY SWITCH MS302-8HGP REPLACEMENT LIGHTED PANEL FOR MS302 LIGHTED 8 POSITION MENU FRAME $168.30 B MS302-10 STAINLESS STEEL SELECTIVE LIGHTED FRAME FOR 10 POSITION ROTARY SWITCH WITH CAM LOCK $426.82 B AND REMOVABLE DOOR (USE WITH MS150 OR MS150-W) 10 INDIVIDUAL 24VAC LIGHTS TO ILLUMINATE EACH SPOT WHEN CUSTOMER TURNS THE ROTARY SWITCH MS302-10HGP REPLACEMENT LIGHTED PANEL FOR MS302-10 LIGHTED 10 POSITION MENU FRAME $168.30 B MS302-O “OLIVATOR”™ LED LIGHTED INSERT FOR THE MS302 LIGHTED MENU SIGN. THE LED’S LIGHT OUT $132.62 B FROM THE CENTER TO EACH FUNCTION THAT IS ON, DRAWING ATTENTION TO EACH FUNCTION SELECTED. THE BRIGHT LED’S WILL ENHANCE THE APPEARANCE OF YOUR BAY. EASILY CAN BE RETROFIT ABLE TO THE MS302 STAINLESS SIGN. STAINLESS STEEL MENU FRAME MS400-R1 STAINLESS STEEL FRAME (24”W x 36”H) FOR MENU SIGN (2 PARTS WITH TABS) DESIGNED TO $73.30 B ACCEPT BOTH THE MS100B-W AND MS100-10W MENU SIGNS MOUNTING TABS ON OUTSIDE MS400-R2 STAINLESS STEEL FRAME (24”W x 36”H) FOR MENU SIGN (2 PARTS WITH TABS) DESIGNED TO $73.30 B ACCEPT BOTH THE MS100B-W AND MS100-10W MENU SIGNS MOUNTING TABS ON INSIDE MS400-T REPLACEMENT TOP FOR MS400-R1 & MS400-R2 $55.62 B 8 POSITION LEXAN ® BAY MENU SIGNS MS100B-W 8 POSITION BAY MENU SIGN WITH WARNING INSERT FOR WINDOW – SIZE 23.5” W x 35.5”H. $64.31 D SPOTS (MS200) USES 8 CIRCULAR SPOTS SAME COLORED SAME AS METER DECALS (BS523) WITH LAMINATED INSTRUCTION SPOTS WHICH ARE ADHESIVE TO BACK OF MENU SIGN. CAN BE MOUNTED INSIDE MS302 LIGHTED FRAME OR MS400 STAINLESS STEEL FRAME. MS100B 8 POSITION BAY MENU SIGN HAS WINDOW TO VIEW BIG TIME (BT800B OR BT902). CAN BE $60.65 D MOUNTED INSIDE MS302 LIGHTED FRAME. SAME AS MS100W EXCEPT FOR WINDOW. 10 POSITION LEXAN ® BAY MENU SIGNS MS100-W10 10 POSITION BAY MENU SIGN WITH WARNING INSERT FOR WINDOW – SIZE 23.5”W x 35.5”H- $78.00 D USES 10 CIRCULAR SPOTS (MS200) COLORED SAME AS METER DECALS (DECPS200) WITH LAMINATED INSTRUCTION SPOTS WHICH ARE ADHESIVE TO BACK OF MENU SIGN. CAN BE MOUNTED INSIDE MS302-10 LIGHTED FRAME OR MS400 FRAME. MS100-10 10 POSITION BAY MENU SIGN HAS WINDOW TO VIEW BIG TIME (BT800B OR BT902). CAN BE $74.78 D MOUNTED INSIDE MS302-10 LIGHTED FRAME. SAME AS MS100-W10 EXCEPT FOR WINDOW. WICKET BAY INSTRUCTION SIGN BS WR1 WICKET BAY INSTRUCTION SIGN SIZE 8.5”H x 11”W UV PROTECTED PLASTIC $25.11 D

Page 26

MODEL NUMBER DESCRIPTION MSRP

DISC. CODE

INSTRUCTION SPOTS FOR MS100B, MS100B-W, & MS150-W MS200-ABD BLUE “AIR BLOW DRY ” INSTRUCTION SPOT $2.82 D MS200-WS ORANGE “WASH/SOAP” INSTRUCTION SPOT $2.82 D MS200-RN WHITE “RINSE” INSTRUCTION SPOT $2.82 D MS200-HW GREEN “HIGH PRESSURE WAX” INSTRUCTION SPOT $2.82 D MS200-LFW GREEN “LOW PRESSURE FOAM WAX” INSTRUCTION SPOT $2.82 D MS200-CCP GREEN “CLEAR COAT PROTECTANT” SPOT $2.82 D MS200-OFF RED “OFF” INSTRUCTION SPOT $2.82 D MS200-STP RED “STOP” INSTRUCTION SPOT $2.82 D MS200-ET YELLOW “ENGINE/TIRE CLEANER” INSTRUCTION SPOT $2.82 D MS200-EC YELLOW “ENGINE CLEANER” INSTRUCTION SPOT $2.82 D MS200-TC YELLOW “TIRE CLEANER” INSTRUCTION SPOT $2.82 D MS200-FB BLUE “FOAM BRUSH” INSTRUCTION SPOT $2.82 D MS200-PS PINK “PRESOAK” INSTRUCTION SPOT $2.82 D MS200-SFR ROSEMAN RED “SPOT FREE RINSE” INSTRUCTION SPOT $2.82 D MS200-BNK BLUE BLANK INSTRUCTION SPOT $2.82 D SPECIAL INSTRUCTION SPOTS FOR MS100B, MS100B-W, & MS150-W MS201-EC GREEN “ENGINE CLEANER” INSTRUCTION SPOT $2.82 D MS201-FW YELLOW “FOAM WAX” INSTRUCTION SPOT $2.82 D MS201-FB ORANGE “FOAM BRUSH” INSTRUCTION SPOT $2.82 D MS201-WS PINK “WASH/SOAP” INSTRUCTION SPOT $2.82 D MS201-FLW YELLOW “FOAMING LEMON WAX” INSTRUCTION SPOT $2.82 D MS201-RG WHITE “RINSE AND GO” INSTRUCTION SPOT $2.82 D MS201-TB GREEN “TIRE BRUSH” INSTRUCTION SPOT $2.82 D MS201-PS BLUE “PRESOAK” INSTRUCTION SPOT $2.82 D MS201-HFW RED “HIGH PRESSURE FOAM WAX” INSTRUCTION SPOT $2.82 D MS201-MCB BLUE “MULTI-COLOR FOAM BRUSH” INSTRUCTION SPOT $2.82 D MS201-MCP GREEN “MULTI-COLOR FOAM COAT PROTECTANT” SPOT $2.82 D SPECIAL INSTRUCTION SPOTS ENGLISH & SPANISH FOR MS100B, MS100B-W, & MS150-W MS202-WS ENGLISH & SPANISH ORANGE “WASH/SOAP” INSTRUCTION SPOT $3.54 D MS202-RN ENGLISH & SPANISH WHITE “RINSE” INSTRUCTION SPOT $3.54 D MS202-HW ENGLISH & SPANISH GREEN “HIGH PRESSURE WAX” INSTRUCTION SPOT $3.54 D MS202-CCP ENGLISH & SPANISH GREEN “CLEAR COAT PROTECTANT” INSTRUCTION SPOT $3.54 D MS202-MCP ENGLISH & SPANISH GREEN “MULTI COLOR FOAM PROTECTANT” INSTRUCTION SPOT $3.54 D MS202-OFF ENGLISH & SPANISH RED “OFF” INSTRUCTION SPOT $3.54 D MS202-ET ENGLISH & SPANISH YELLOW “ENGINE/TIRE CLEANER” INSTRUCTION SPOT $3.54 D MS202-EC ENGLISH & SPANISH YELLOW “ENGINE CLEANER” INSTRUCTION SPOT $3.54 D MS202-TC ENGLISH & SPANISH YELLOW “TIRE CLEANER” INSTRUCTION SPOT $3.54 D MS202-FB ENGLISH & SPANISH BLUE “FOAM BRUSH” INSTRUCTION SPOT $3.54 D MS202-PS ENGLISH & SPANISH PINK “PRESOAK” INSTRUCTION SPOT $3.54 D MS202-SFR ENGLISH & SPANISH ROSEMAN RED “SPOT FREE RINSE” INSTRUCTION SPOT $3.54 D ACCESSORIES FOR FRAMES AND SIGNS MS310 REPLACEMENT LAMP FOR MS302 LIGHTED FRAME $1.65 D MS312 LAMP SOCKET FOR MS302 LIGHTED FRAME $7.22 D MS315 CUSTOM NAME STRIPS 2 COLOR FOR MS 100 $C/F D (250 PIECE MINIMUM ORDER PLUS ONE TIME ART/PLATE CHARGE OF $125.00) MS316 BLANK NAME STRIP FOR MS 100 $2.85 D MS526 DECAL WARNING INSERT FOR MS 100 $4.90 D MS400-T REPLACEMENT TOP FOR MS400-R1 & MS400-R2 $55.62 D

Page 27

MODEL NUMBER DESCRIPTION MSRP

DISC. CODE

REMOTE CONTROL RC800 REMOTE CONTROL TO FIELD CHANGE THE SCROLLING MESSAGES IN IDX DISPLAYS, DISPLAY $153.85 B TIMERS OR MESSAGE CENTERS. YOU CAN ALTER CYCLE TIME, ALTER COINS TO START, CHECK AND CLEAR COIN COUNT, SET TIME FOR LAST MINUTE ALERT, AND FIELD CHANGE 3 PERSONALIZED MESSAGES TOTALING 108 CHARACTERS. **FOR ALL IDX DISPLAY TIMERS.** IR800 THE “Interfacer”™ INCLUDES THE BEST FEATURES OF OUR RC800 HANDHELD REMOTE PLUS $230.77 B SECURE INFRARED COMMUNICATION. RETRIEVE COIN COUNTS & CHANGE MESSAGES FOR ALL STANDARD IDX DISPLAYS & DISPLAY TIMERS. WITH THE BTNS6B PROCESSOR CODE YOU CAN PROGRAM A FREE WASH CYCLE. REQUIRES IRM800 (INFRARED REMOTE MODULE) FOR EACH DISPLAY / TIMER. **NOT TO BE USED WITH GT 200 OR GT1200** PARTS AND ACCESSORIES FOR REMOTES IRM800 INFRARED RECEIVER FOR IR800 TO CONVERT IDX DISPLAYS / DISPLAY TIMERS FOR USE WITH $53.82 B INFRARED REMOTE CONTROL. **NOT TO BE USED WITH GT 200 OR GT1200** BT54 COILED CORE FOR RC800 $16.66 C SMART SELECTOR SWITCHES PS200 PermaSwitch™ PS200 10 POSITION ELECTRONIC SELECTOR SWITCH INTERCHANGEABLE WITH MOST $375.00 B 8 OR 10 POSITION MECHANICAL ROTARY WITH MINIMUM MODIFICATION. POSITIVE PUMP ON WITH NO DELAY BETWEEN HIGH PRESSURE CYCLES, WASH DOWN – 10 MIN. CYCLE, 2.5AMP LOAD PER EACH OUTPUT INCREASES LIFE OF TIMERS, DANCING LED’s DRAWS ATTENTION & HIGHLIGHTS THE SERVICES SELECTED, INTERNAL BEEPER ALERTS USER OF THEIR SELECTED SERVICE. U.S. PATENT # 5,371,681 ACCESSORIES FOR PS200 PS200-10 TOUCH PAD ASSEMBLY FOR PS200 READY TO MOUNT ON DOOR, COMPLETE WITH DECPS200 $99.95 B DECALS, SHOCK ABSORBING GASKET, BACK PLATE WITH GASKET AND MOUNTING HARDWARE. PS200-CB INTERCONNECTING BOARD FOR PS200 $47.17 B PS200-R PermaSwitch BACK HALF ONLY INCLUDES NYLON STUDS AND THUMB SCREWS $295.00 B PS200WIRHRNS REPLACEMENT WIRING HARNESS FOR PS200 PermaSwitch $23.08 B DECPS200 MULTI-COLORED PermaSwitch PS200 DECAL WITH SERVICE SPOTS $21.97 D MA72-P RELAY OUTPUT MODULE FOR PS200 FOR 3RD STACK $33.50 C PSNYSTANDOFF NYLON STAND OFF TO ATTACH PS200-R TO DOOR. $1.54 B HS8709 STAINLESS STEEL THUMB SCREW TO ATTACHED PS200-R TO STANDOFF $6.46 B OCTAL - COUNTER / HOUR METER BD200 OCTAL COIN COUNTER – UP TO EIGHT SEPARATE DIGITAL COIN COUNTERS IN ONE CASE $357.14 E HAS EIGHT FLEXIBLE INPUTS THAT CAN BE USED AS HOUR METERS OR EVENT COUNTERS. USE WITH 24VAC OR 24VDC SIGNALS. DISPLAYS TIME ELAPSED SINCE LAST RESET WITH BD200-TM TRACKING MODULE. SAVES INFORMATION THROUGH A POWER OUTAGE. PROGRAMMABLE DISPLAY OPTIONS THROUGH A RC800 REMOTE. SIZE 3.35”Wx3.80”Hx3.15”D BD200-WH COUNTER WIRING HARNESS FOR BD200 $16.85 E RC800 REMOTE CONTROL TO SET UP BD200 AND RETRIEVE OR CLEAR ANY OR ALL OF THE 8 DIFFERENT $153.85 B TIME OR COIN COUNTS. LTT8H STAINLESS STEEL ENCLOSURE WITH LIFT OUT DOOR AND CAM LOCK – SIZE 6”W x 5 9/16”H x 5”D – $100.00 B FOR WALL MOUNT. TO BE USED WITH BD200, LTT800, LTT802, LST800, AND LST802. COIN COUNTER INTERFACE MODULE IB100 TO CONVERT 24VAC WASH CYCLE COUNTERS TO COUNT COINS NOT CYCLES – 24 / 120VAC INPUT $58.34 C

Page 28

MODEL NUMBER DESCRIPTION MSRP

DISC. CODE

MULTI FUNCTION LOW VOLTAGE TIMERS U.S. PATENT 5,371,681 AT300 DESIGNED TO BE A DIRECT REPLACEMENT FOR THE SPECIALTY MANUFACTURE “TIME MACHINE $129.95 E TIMER” AND OTHERS WITH THE SAME FOOT PRINT. THE AT300 HAS ENHANCED FEATURES LIKE A 5 AMP RELAY OUTPUT, WIDE RANGE OF INPUT VOLTAGES FROM 12 VAC/VDC TO 28VAC & 40VDC LAST ALERT AND COIN IN BEEP OUTPUT- 256 COIN ACCUMULATION, 1 TO 15 COINS TO START OPTIONAL PLUG IN DISPLAY PART# AT300DB-3S7 PLUS MORE. AT300-2 SAME FEATURES AS AT300 WITH THE TWO TIME OPTION FOR COMBO VACUUMS, AIR/WATER $164.65 E MACHINES OR FOR SPECIALS CAN USE 2 PLUG IN DISPLAYS P[ART # AT300DB-3S7 AT300-QUAD THIS MODEL HAS 4 SEPARATE 5 AMP OUTPUTS WITH 1 COIN INPUT GREAT TO REDUCE COSTS $199.95 E ON A VACUUM ISLAND OR OTHER PROJECTS AT300DB-3S7 3- SEVEN SEGMENT PLUG IN DISPLAY FOR AT300 $129.95 E AT300DB-3S7/2 2ND DISPLAY OPTION WHEN USING THE AT300-2 OR ON AT300-QUAD $129.95 E LC526-AC/DC LAST ALERT HORN MULTI VOLTAGES 9-40 AC / DC WITH “L” BRACKET RED & BLACK WIRES $41.67 C PLUG IN TIMERS INDUSTRIAL GRADE U.S. PATENT #4,976,346 AT401D ***OBSOLETE*** ***REPLACED BY PART #AT402*** AT402 24VAC ACCUMULATING TIMER CHANGEABLE BY 1 SEC PER COIN SETTINGS. SHORT CIRCUIT $119.95 C PROOF OUTPUT. (USES DS511 SOCKET) ATS402-?? CUSTOM DESIGN SOFTWARE, VOLTAGES, AND FEATURES $246.67 C OPTIONS FOR MODEL AT402 THESE OPTIONS ARE FACTORY INSTALLED ONLY AND CANNOT BE FIELD INSTALLED. (TO SPECIFY OPTION, ADD APPROPRIATE SUFFIX TO BASIC MODEL NUMBER.) -C ACCUMULATING TIMER FOR PATENT #4,976,346 COUNTER OPTION W/ HIGH SECURITY OUTPUT FOR $10.00 C COIN COUNTER -L AUXILIARY OUTPUT ALERT PLUS AUXILIARY OUTPUT FOR COIN COUNTER. LAST COIN ALERT, 1 $15.00 C OUTPUT FOR LIGHT AND 1 OUTPUT FOR 24VDC HORN. -X OPTIONAL OUTPUT FOR X-TRA TIME – EXTENDS 20 SECOND PERIOD AFTER SERVICE TIME HAS $15.00 C EXPIRED FOR CUSTOMER TO DEPOSIT ADDITIONAL COINS FOR EXTRA TIME. AUX. OUTPUT WILL PULSE LIGHT 20 TIMES FOR VISUAL INDICATION.

MOST OF THE ABOVE OPTIONS MAY BE COMBINED INTO A SINGLE TIMER TO

ACCOMPLISH ALL YOUR NEEDS. OPTIONS –L & -X CANNOT BE COMBINED

AT402 ACCESSORY MODULES FOR PLUG IN TIMERS LC LAST ALERT HORN MULTI VOLTAGES 9-34 AC / DC 2 YEAR WARRANTY $41.67 C LC521-DC LAST COIN ALERT (PLUG-IN TYPE, USES DS508 SOCKET) D/C TYPE USE WITH AT402-L, AT403-L $80.00 C LC525-DC LAST COIN ALERT. SAME AS LC521-DC NO PLUG-IN HOUSING (24 VAC) $41.67 C DS508 8 PIN SOCKET ( CAN BE DIN RAIL MOUNTED) $5.83 C DS511 11 PIN SOCKET ( CAN BE DIN RAIL MOUNTED) $7.25 C DS513 DIN RAIL (SPECIFY LENGTH IN INCHES) C/F C

Page 29

MODEL NUMBER DESCRIPTION MSRP

DISC. CODE

FLAT PACK TIMERS INDUSTRIAL GRADE BASE MOUNTED (NON PLUG-IN) AF411 BLOW DOWN TIMER FOR AUTOMATIC CAR WASH THAT CAN BE ACTIVATED BY TREADLE SWITCH, $176.95 C THERMOSTAT OR TIMER IN SELF SERVICE BAYS. SIZE 5.375” L x 3.563” W x 1.75” H AT411E ACCUMULATING TIMER- COIN INPUT ONLY, INPUT & OUTPUT VOLTAGE 115VAC OR 24VAC $94.95 C 2- 25 AMP SCR OUTPUTS MOUNTED ON ALUMINUM HEAT SINK SIZE 5.375” L x 3.563” W x 1.75” H AT411E-1 NON-ACCUMULATING TIMER (FOR USE IN COIN VAC SYSTEMS, TO INHIBIT BILL CHANGER FROM $116.58 C DISPENSING ONLY A SET AMOUNT OF COINS WITH A TIME DELAY BETWEEN SET AMOUNTS) AT411E-1D NON-ACCUMULATING TIMER REMOTE RESET, 1 PULSE TO START, WITH TIME MULTIPLIER $116.58 C SWITCHING ( 2x, 4x, or 8x ), 2 SECONDS UP TO 68 MINUTES AT411E-N1 NON-ACCUMULATING TIMER NON RESETTABLE (FOR USE IN COIN VAC SYSTEMS, REPLACE OLD $116.58 C SLIDE & TURN KNOB TIMERS) AT411E-NR ACCUMULATING TIMER USE WITH AN EXTERNAL RESET (FOR USE IN RUG BETTER ) $116.58 C AT411E-NR1S NON-ACCUMULATING TIMER REMOTE RESETTABLE FOR USE IN WK-NAG-ASGARD CONTROL $116.58 C SYSTEM. EXTENDED RUN TIME FROM ONE COIN PULSE OF 2 SECONDS TO 2.28 HOURS AT412 ACCUMULATING TIMER-COIN INPUT ONLY, INPUT & OUTPUT VOLTAGE 220VAC OR 24VAC (USE ONLY $112.95 C W/ 220VAC WITH ONE SIDE GROUNDED) SIZE 5.375” L x 3.563” W x 1.75” H AT412-N1 NON-ACCUMULATING TIMER NON RESETTABLE $134.58 C AT412-NR1S NON-ACCUMULATING TIMER REMOTE RESETTABLE $134.58 C FLAT PACK TIMERS WITH 24VAC POWER TO RUN A COIN ACCEPTOR INDUSTRIAL GRADE BASE MOUNTED (NON PLUG-IN) AT413 ACCUMULATING TIMER – 24VAC COIN ACCEPTOR OUTPUT, 115VAC INPUT AND OUTPUT VOLTAGE- $129.00 C (2) 25AMP SCR OUTPUTS - 256 COIN ACCUMULATION, AUTOMATIC RESETTABLE FUSE ON 24VAC TERMINAL TO PROTECT COIN ACCEPTOR. SIZE 5.375” L x 3.563” W x 1.75” H AT414 ACCUMULATING TIMER – 24VAC COIN ACCEPTOR OUTPUT, 220VAC INPUT & OUTPUT VOLTAGE- $144.00 C (2) 25AMP SCR OUTPUTS - 256 COIN ACCUMULATION, AUTOMATIC RESETTABLE FUSE ON 24VAC TERMINAL TO PROTECT COIN ACCEPTOR .SIZE 5.375” L x 3.563” W x 1.75” H NON DISPLAY DUAL TIME TWO TIMER INDUSTRIAL GRADE BASE MOUNTED (NON PLUG-IN) AT422 DUAL ACCUMULATING TIMER. TWO TIME SWITCHES & TWO COIN TO START SWITCHES, AND A $129.95 C CONTROL INPUT LINE TO SWITCH BETWEEN TWO TIME & VALUE SETTINGS AT ANY GIVEN INSTANT. INPUT & OUTPUT VOLTAGE 120VAC OR 24VAC SIZE 5.375” L x 3.563” W x 1.75” H AT424 DUAL ACCUMULATING TIMER. TWO TIME SWITCHES & TWO COIN TO START SWITCHES, AND A $144.95 C CONTROL INPUT LINE TO SWITCH BETWEEN TWO TIME & VALUE SETTINGS AT ANY GIVEN INSTANT. INPUT & OUTPUT VOLTAGE 220VAC OR 24VAC SIZE 5.375” L x 3.563” W x 1.75” H OPTIONS FOR FLAT PACK TIMERS THESE OPTIONS ARE FACTORY INSTALLED & CANNOT BE FIELD INSTALLED. (TO SPECIFY AN OPTION, ADD APPROPRIATE SUFFIX TO BASIC MODEL NUMBER) -L AUXILIARY OUTPUT ALERT OPTION (USE WITH MODEL LC521A/C OR SL560). AUXILIARY OUTPUT $15.00 C WILL COME ON FOR LAST 32 SEC. OF TIME. FOR USE ON AT411E, AT412, AT413, AT422 & AT424. (AUXILIARY OUTPUT VOLTAGE MUST BE THE SAME AS THE LOAD VOLTAGE) -X X-TRA TIME OPTION – EXTENDS A 20 SECOND PERIOD AFTER SERVICE TIME EXPIRES, ALLOWING $15.00 C CUSTOMERS TO DEPOSIT ADDITIONAL COINS FOR EXTENDED SERVICE. VISUALLY ALERTS CUSTOMER BY PULSING INDICATOR LIGHT OR HORN DURING EXTENSION PERIOD. FOR AT411E, AT412, AT413, AT422 & AT424. ACCESSORY MODULES FOR AT411, AT412, AT413, AT422, AT424 TIMERS LC520-AC LAST COIN ALERT CONTINUOUS TONE AC HORN 12- 32VAC $33.34 C LC521-AC LAST COIN ALERT PLUG-IN TYPE, USES DS508 SOCKET A/C TYPE FOR 12-32 VAC ONLY $80.00 C LC525-AC SAME AS LC521-AC W/NO PLUG-IN HOUSING AND “L” BRACKET FOR MOUNTING $41.67 C CB400-L A DEVICE THAT CAN BE FIELD INSTALLED BY CONNECTING 4 WIRES TO COIN “XEPTOR”. WILL $74.95 C BEEP EVERY TIME YOUR CUSTOMER PUTS A COIN INTO YOUR ACCEPTOR & BEEP FOR LAST ALERT (USE WITH DS511 SOCKET & WIRES) 24/120VAC INPUT IB100 TO CONVERT 24VAC WASH CYCLE COUNTERS TO COUNT COINS NOT CYCLES 24V/120 INPUT $58.34 C

Page 30

MODEL NUMBER DESCRIPTION MSRP

DISC. CODE

DIGITAL DISPLAYS USED WITH EXTERNAL TIMERS U.S. PATENT 5,371,681 BT800B ***DISCONTINUED*** REPLACED BY BT900 BT802B ***DISCONTINUED*** REPLACED BY BT900-2 BT810B ***DISCONTINUED*** REPLACED BY DD810-M BT900 BIG TIME CONVERTS MOST 24VAC TIMER TO A DISPLAY TIMER WITH 2” SCROLLING LETTERS $346.15 D CASE SIZE 10”W x 7.1”H x 3”D DISPLAY WILL FLASH FOR LAST MINUTE OF TIME. CHANGEABLE SCROLLING MESSAGE OF 29 CHARACTERS. SWITCH SETTABLE FOR X-TRA TIME MESSAGE VIEWING AT END OF CYCLE. BT900-E BIG TIME DISPLAY MOUNTED IN BT8B STAINLESS STEEL LOW PROFILE CASE WITH CAM LOCK $408.80 D LOW PROFILE CASE SIZE 12”D x 7.35”H x 2.5”L BT900-2 BIG TIME WILL TRACK MODEL AT422 OR LTT802 WITH 2 DIFFERENT SERVICES OR 2 DIFFERENT $369.22 D COINS TO START TIMES PER COIN. CAN BE SWITCHED BACK AND FORTH. WILL CALCULATE THE REMAINING TIME ON THE UNUSED AMOUNT OF MONEY SWITCHING FROM SERVICE TIME A TO B OR SERVICE TIME B TO A. WELCOME INTRO MESSAGE OF 72 CHARACTERS & EXIT MESSAGE OF 36 CHARACTERS. CASE SIZE 10”Wx7.1”Hx3”D BTC900 BIG TIME DISPLAY WITH COUNT UP FEATURE USED WITH SOME CREDIT CARD SYSTEM TO $371.74 D INFORM CUSTOMER OF TIME BEING USED MOUNTED IN THE BT15 POLY CARBON CASE BTC900-E THE BTC900 MOUNTED IN THE LOW PROFILE S/S CASE HORN NOT INCLUDED $408.80 D DD810-M DIGITAL DISPLAY FOR AUTOMATIC BLOWERS WITH HIGH OUTPUT LED’S. WELCOME INTRO $369.22 D MESSAGE OF 72 CHARACTERS, 36 CHARACTERS INTERRUPT MESSAGE (EXP: “MOVE UP SLOWLY”).HALF-WAY DEDICATED MESSAGE (EXP: “YOU SHOULD BE HALF WAY THROUGH”) DD810 DIGITAL DISPLAY FOR AUTOMATIC BLOWERS WITH LOW PROFILE STAINLESS STEEL CASE. $490.14 D LTT800 LITTLE DIGITAL DISPLAY FOR MOUNTING IN METER BOXES OR VACUUMS. CONVERTS MOST $316.58 C TIMERS TO A DISPLAY TIMER. JUMBO MESSAGE CENTERS BS820 ULTRA BRIGHT JUMBO MESSAGE CENTER- MOUNTED IN LOW PROFILE STAINLESS STEEL CASE $997.95 C WITH LEXAN® WINDOW. LARGE ULTRA BRIGHT RED LED DISPLAY AREA (22.25”W x 7.35”H 2.5”D) WITH FEATURES OF IDX’S BT912 BIG TIME TWO TIMER PLUS ADDITIONAL FEATURES. STANDARD ULTRA HIGH BRIGHT RED LEDS FOR USE IN DIRECT SUN LIGHT, 9 PROGRAMMABLE 30 CHARACTER MESSAGES, PROGRAMMABLE WELCOME MESSAGE – 64 CHARACTER: EACH MESSAGE DISPLAYS WHEN AN INPUT SEES POWER. EACH MESSAGE WILL SCROLL ONE AFTER THE OTHER AS LONG AS POWER IS APPLIED TO THAT INPUT. POWER REQUIREMENTS 24 VAC AT 1AMP - INPUTS 24 VAC BS820-A ULTRA BRIGHT JUMBO MESSAGE CENTER- FOR AUTOMATICS SAME SPECS AS BS820 WITH ONE $997.95 C EXCEPTION. THE BS820-A WILL DISCONTINUE SCROLLING THE MESSAGE AS SOON AS POWER HAS BEEN REMOVED. SIZE 22.25” W x 7.35” H x 2.5” D SPECIALTY DISPLAY TIMERS “CARD- DISPLAY PROTOCOL” STANDARD LTT802FRAGA REPLACEMENT SPECIAL LITTLE TWO TIMER FOR FRAGRAMATICS COMBO $633.99 C ***DOES NOT INCLUDE STAINLESS STEEL BRACKET*** BT912FRAGRA REPLACEMENT SPECIAL BIG TIME TWO TIMER FOR FRAGRAMATICS COMBO *** INCLUDES $683.97 C WIRING HARNESS AND MOUNTING STUDS*** CASE SIZE 10”Wx7.1”Hx3”D BT907 SPECIAL BIG TIME WITH 7 DIFFERENT TIMES THAT IS USED BY DOYLE VACUUM, IVS, J.E. ADAMS $629.86 D LTT802RYKO REPLACEMENT SPECIAL LITTLE TWO TIMER FOR RYKO MANUFACTURING $533.49 C BT912-LUCKY BIG TIME TWO TIMER WITH PATENT PENDING LUCKY TIME PROGRAM MOUNTED IN THE BT912 $667.49 D STAINLESS STEEL CASE INCLUDES LC HORN. THIS NEW BIG TIME GIVES THE OPERATOR A WAY TO INCREASE REVENUE BY OFFERING HIS CUSTOMERS A CHANCE TO RECEIVE ADDITIONAL TIME EVER TIME THEY WASH. OTHER STANDARD FEATURES HIGH OUTPUT LEDS, LAST ALERT & COIN IN BEEP OUTPUT, TWO TIME SELECT, RELAY OUTPUT, SIZE- 12”W x 7.35”H x 2.5”D. BT912 IVS REPLACEMENT BIG TIME FOR IVS / GINSAN COMBO VACUUMS **CASE SIZE 10”Wx7.1”Hx3”D $647.43 C BT912 D&S REPLACEMENT BIG TIME FOR D&S COMBO VACUUMS & METERS **CASE SIZE 10”Wx7.1”Hx3”D $647.43 C BT912-PREMEIR SPECIAL CONFIGUARTION FOR PREIMER DRYING CORP $647.43 C

Page 31

MODEL NUMBER DESCRIPTION MSRP

DISC. CODE

SPECIALTY DISPLAY TIMERS “CARD- DISPLAY PROTOCOL” STANDARD

U.S. PATENT 5,371,681. BTC907DOYLE-U SPECIAL BIG TIME WITH 7 DIFFERENT TIMERS ULTRA BRIGHT LED’S AND COUNT UP PROGRAM $866.67 C INCLUDES LCR25-AC HORN & REMOTE BOX USED BY DOYLE VACUUM CO BTC912DOYLE-U SPECIAL BIG TIME TWO TIMER WITH ULTRA BRIGHT LED’S AND COUNT UP PROGRAM, ALERT $690.22 C HORN LCR25-AC AND REMOTE BOX USED BY DOYLE VACUUM CO DIGITAL DRYER TIMER

DD910 DRYER TIMER WITH DIGITAL COUNTDOWN DISPLAY FOR AUTOMATIC BLOWERS WITH HIGH $599.95 D OUTPUT LEDS, LOW PROFILE STAINLESS STEEL CASE– 2.5”D x 7.35”H x 12”W. REMOTE RESET TABLE, DISABLE COIN ACCEPTOR, 5 AMP RELAY OUTPUT, SUNLIGHT VISIBLE LEDS, PROGRAMMABLE WELCOME MESSAGE OF 72 CHARACTERS, INTERRUPT MESSAGE (EXP: “MOVE UP SLOWLY”). HALF-WAY DEDICATED MESSAGE (EXP: “YOU SHOULD BE HALF WAY THROUGH”) DD910-U DRYER TIMER W/DIGITAL COUNTDOWN DISPLAY ULTRA BRIGHT LED’S $799.95 D DD910-M DRYER TIMER W/DIGITAL COUNTDOWN DISPLAY IN BT15 POLY CARBON ENCLOSURE $550.31 D

OPTIONS FOR MODEL BT900, BT900-2, DD810-M, DD810, & DD910

THESE OPTIONS ARE FACTORY INSTALLED AND CANNOT BE FIELD INSTALLED. (TO SPECIFY AN OPTION, ADD APPROPRIATE SUFFIX TO BASIC MODEL NUMBER)

-B BURGLAR ALARM HAS VISUAL ALERT, MUST HAVE –H OPTION FOR AUDIBLE ALERT. INCLUDES $33.50 D IMPACT SWITCH. -D DISABLE COIN ACCEPTOR FOR OUT OF SERVICE CONDITIONS $33.50 D -F HIGH OUTPUT LED’s FOR BT800B, BT802B, OR HD800B $100.00 D BT810B, HD800B, & DD910. -U RED ULTRA BRIGHT LED’s FOR DIRECT SUNLIGHT READABLE UPGRADE FOR BT800B, BT802B, $183.71 D BT810B, HD800B, DD810, & DD910. ACCESSORY MODULES FOR BT900, BT900-2, DD810, GT200 & LTT900 LC LAST ALERT LOW POWER CONSUMPTION MULTI VOLTAGE 9 – 34 AC/DC 2-YEAR WARRANTY $41.67 C LC521-AC LAST COIN ALERT (PLUG-IN TYPE, USES DS508 SOCKET A/C TYPE (24VAC) USE WITH AC TIMERS, $80.00 C WITH LAST ALERT AND EXTRA TIME OPTIONS DS508 8 PIN SOCKET (CAN BE DIN RAIL MOUNTED) $5.83 C LC525-AC SAME AS LC521-AC NO PLUG IN HOUSING (24VAC) $41.67 C VENDER TIMERS AND CONTROLS BT912-V BIG TIME DIGITAL DISPLAY TIMER DESIGNED TO CONTROL UP TO 9 DIFFERENT ELECTRONIC $697.97 D VENDER SHELVES. MOUNTED IN A LOW PROFILE STAINLESS STEEL CASE – 2.5”D x 7.35”H x12”W .5 AMP RELAY OUTPUT, COIN-IN BEEPER, DISABLE COIN XEPTOR IF A PRODUCT IS EMPTY & SCROLLS “’PRODUCT NAME’ IS EMPTY MAKE A DIFFERENT SELECTION”, SCROLLS PRICING & PRODUCT NAME, PROGRAMMABLE- 30 DIFFERENT CHARACTERS FOR EACH PRODUCT, HIGH OUTPUT LEDS, & MORE LTT802-V LITTLE TWO TIMER VENDER TIMER TO CONTROL UP TO (7) SEVEN DIFFERENT ELECTRONIC $428.86 E VENDER SHELVES INCLUDED DISABLE AND BILL INPUT MAVEND12DC WIRING & 12VDC POWER INTERFACE MODULE FOR LAUREL ELECTRONIC DROP SHELF VENDER, $58.00 C 1 PER SHELF REQUIRED MAVEND24AC WIRING & 24VAC POWER INTERFACE MODULE FOR LAUREL ELECTRONIC DROP SHELF VENDER, $58.00 C 1 PER SHELF REQUIRED MA70-V ISOLATED 24VAC POWER SUPPLY AND DISABLE RELAY MODULE FOR BILL ACCEPTORS WHEN $33.50 C TIED TO VENDER TIMER

Page 32

MODEL NUMBER DESCRIPTION MSRP

DISC. CODE

REPLACEMENT CIRCUIT BOARDS FOR BIG TIMES DISPLAYS & TIMERS U.S. PATENT 5,371,681. P800B ***OBSOLETE REPLACED BY PART #P900-*** P800B-F ***OBSOLETE REPLACED BY PART #P900-*** P800B-FH ***OBSOLETE REPLACED BY PART #P900-*** P800B-H ***OBSOLETE REPLACED BY PART #P900-*** P802B ***OBSOLETE REPLACED BY PART #P900-2*** P802B-F ***OBSOLETE REPLACED BY PART #P900-2*** P802B-FH ***OBSOLETE REPLACED BY PART #P900-2*** P802B-H ***OBSOLETE REPLACED BY PART #P900-2*** P900- PRINTED CIRCUIT BOARD FOR BT800B & BT900 / BT900-E $269.00 D P900-2 PRINTED CIRCUIT FOR BT802B & BT900-2B $292.31 D PC900 PRINTED CIRCUIT FOR BTC800B & BTC900 COUNT UP DISPLAY WITH HORN OUTPUT $297.59 D PD810 PRINTED CIRCUIT FOR BT810B DRYER DISPLAY $308.33 D PD810-UR PRINTED CIRCUIT FOR BT810B DRYER DISPLAY WITH RED ULTRA BRITE LED $508.33 D P820 PRINTED CIRCUIT FOR BS820 JUMBO MESSAGE CENTER SIGN $757.14 D P820-A PRINTED CIRCUIT FOR BS820-A JUMBO SIGN FOR AUTOMATICS $757.14 D P902- ***OBSOLETE REPLACED BY PART # P912-*** P902-F ***OBSOLETE REPLACED BY PART # P912-*** P902-FH ***OBSOLETE REPLACED BY PART # P912-*** P902-H ***OBSOLETE REPLACED BY PART # P912-*** P902-FRAGA ***OBSOLETE REPLACED BY PART # 912-BHS*** P902-HU ***OBSOLETE REPLACED BY PART # P912-UR*** P902-LUCKY ***OBSOLETE REPLACED BY PART # P912-LUCKY*** P902-T *** OBSOLETE REPLACED BY PART # P912-T*** P912-BHS PRINTED CIRCUIT FOR BT902FRAGRA SPECIAL $524.18 D P907-HS PRINTED CIRCUIT FOR BT907 BIG TIME SEVEN TIMERS $562.49 D P907-HSU PRINTED CIRCUIT FOR BT907 BIG TIME SEVEN TIMERS WITH ULTRA BRIGHT RED LEDS $762.49 D PD910- PRINTED CIRCUIT FOR DD910 DRYER TIMER DISPLAY $416.83 D PD910-UR PRINTED CIRCUIT FOR DD910 DRYER TIMER DISPLAY WITH ULTRA BRITE LED $616.83 D P912- PRINTED CIRCUIT FOR BT912 BIG TIME TWO TIMERS WITH RELAY OUTPUT $429.50 D P912-D PRINTED CIRCUIT FOR BT912-D BIG TIME WITH DISABLE FEATURE $463.00 D P912-LUCKY PRINTED CIRCUIT FOR BT912-LUCKY TIME BIG TIME TWO TIMERS WITH RELAY OUTPUT $490.68 D P912-T PRINTED CIRCUIT FOR BT912 LATCH TIME TWO TIMERS WITH RESET CIRCUIT $524.18 D P912-BHS PRINTED CIRCUIT FOR BT912 TWO TIMERS SET UP FOR FRAGRA $524.18 D P912-UR PRINTED CIRCUIT FOR BT912 BIG TIME TWO TIMERS WITH RELAY OUTPUT $629.50 D P912-V PRINTED CIRCUIT FOR BT912-V VENDER TIMER $524.18 D P912V-U PRINTED CIRCUIT FOR BT912-V WITH ULTRA BRIGHT LED’S $724.18 D P922- PRINTED CIRCUIT FOR BT912 JUMBO TIME TWO TIMERS INCLUDES ULTRA BRIGHT RED LEDS $757.14 D

STAINLESS STEEL COVERS FOR BT800B, BT802B, BT810B, BT902, BT912, BT922, DD910,

BT8 STAINLESS STEEL COVER SLIDE OVER WITH MOUNTING TABS SIZE 10.25”W x 7.25”H x 3.75”D $82.85 B BT8B STAINLESS STEEL ENCLOSURE WITH HINGED DOOR & CAM LOCK FOR BT912, DD810, DD910. $195.00 B SIZE 12”W x 7.35”H x 2.5”D BT8H STAINLESS STEEL COVER SLIDE OVER WITH HINGED FRONT COVER FASTEN BACK OF BT8H TO $131.88 B WALL COVER HINGE WILL OPEN. LOCK WITH 3 OF YOUR TAMPER PROOF SCREWS. SIZE 10.25”W x 7.25”H x 4.31”D BT8E STAINLESS STEEL ENCLOSURE (ONLY 2” DISPLAY SHOWS) WITH CAM LOCK AND REMOVABLE $172.31 B SERVICE DOOR. OVERALL SIZE 12”W x 10”H x 3.75”D BT8ED STAINLESS STEEL DOOR FOR BT8E ENCLOSURE $86.16 B BT8ES STAINLESS STEEL ENCLOSURE FOR BT8E ENCLOSURE $109.66 B BT9 STAINLESS STEEL ENCLOSURE WITH RED LENS, HINGED DOOR & CAM LOCK FOR BT922 $205.39 B SIZE 22.25”W x 7.35”H x 2.5”D

Page 33

MODEL NUMBER DESCRIPTION MSRP

DISC. CODE

DIGITAL BIG TIME CLOCK TIMERS U.S. PATENT 5,371,681. BT900 SERIES DUAL CLOCK TIMERS FOR WALL MOUNTING BT912-M BIG TIME™ TWO TIMER DIGITAL CLOCK TIMER FOR WALL MOUNTING HAS ALL THE $470.30 D CONVENIENCES OF THE LITTLE TWO TIMER & THE BIG TIME DISPLAY AND COMBINES THEM INTO ONE UNIT, BT902. STANDARD FEATURES INCLUDE HIGH OUTPUT LEDs, LAST MIN. ALERT, TWO TIMER, X-TRA TIME, & BONUS TIME. 3 CHANGEABLE MESSAGES VIA RS-232 PORT (CHANGEABLE 72 CHARACTER INTRO, 36 CHARACTER EXIT MESSAGE); CONTROL INPUT LINE TO SWITCH FROM TIMER A OR TIMER B. (EXP: SET DIFFERENT START + CYCLE TIME – DAYLIGHT & DARK / SET DIFFERENT TIME PER COIN FOR TIRE CLEANER THAN RINSE. . CASE SIZE 10”W x7.1”H x 3”D BT902E ****REPLACED BY PART #BT912*** BT902 ****REPLACED BY PART #BT912-M*** CASE SIZE 10”W x 7.1”H x 3”D INCLUDES HORN OUTPUT (–H OPTION) BT912 BIG TIME TWO TIMER DIGITAL CLOCK TIMER FOR WALL MOUNTING INCLUDES LOW PROFILE $614.00 D STAINLESS STEEL CASE. HAS ALL THE SAME FEATURES OF THE BT902-H BIG TIME TWO TIMER PLUS THE ADDED FEATURE OF A 5AMP RELAY OUTPUT AND LAST MIN., ALERT HORN MOUNTED. IRM800 REMOTE RECEIVER CAN BE ADDED TO WORK WITH THE IR800 INFRARED REMOTE & THE “LATCH TIME “(–T) OPTION CAN BE ADDED. SIZE 12”W x 7.35”H x 2.5”D BTC912 BIG TIME TWO TIMER WITH COUNT UP CHIP MOUNTED IN LOW PROFILE STAINLESS STEEL CASE $649.29 D BT907 SPECIAL BIG TIME WITH 7 DIFFERENT TIMES THAT IS USED BY DOYLE VACUUM, IVS, J.E. ADAMS $629.89 D USED IN COMBO VAC, MOUNTED IN THE BT13 ENCLOSURE, HORN- MODEL #LC525-AC MOUNTED, EACH OF THE 7 SERVICES CAN HAVE DIFFERENT START TIMES AND PRICING. DISPLAY SCROLLS EACH MESSAGE AS SERVICE IS SELECTED AND DISPLAYS AMOUNT FOR SERVICE. COULD ALSO BE INSTALLED AS A BAY TIMER. CASE SIZE 10”W x 7.1”H x 3”D BT907-U SAME AS BT907 BUT INCLUDED THE ULTRA BRIGHT RED LED’S. CASE SIZE 10”Wx7.1”Hx3”D $829.89 D

OPTIONS FOR MODEL BT900 SERIES

THESE OPTIONS ARE FACTORY INSTALLED AND CANNOT BE FIELD INSTALLED. (TO SPECIFY AN OPTION, ADD APPROPRIATE SUFFIX TO BASIC MODEL NUMBER)

-B BURGLAR ALARM HAS VISUAL ALERT. INCLUDES SWITCH $33.50 D -D DISABLE COIN “XEPTOR” OPTION (Reads visually “Out of Service”, plus turns off COIN “XEPTOR”.) $33.50 D -P (INCLUDED IN BT912) OUTPUT IS SHORT-CIRCUITING PROTECTED. $16.66 D -T LATCH TIME / WASH AS LONG AS YOU WANT **BT912 ONLY** INCLUDES –D OPTION $92.00 D -U RED ULTRA BRIGHT LEDS FOR DIRECT SUNLIGHT READABLE UPGRADE FOR BT902 OR BT912 $183.71 D ACCESSORY MODULES FOR BIG TIME & JUMBO TIME LC521-AC LAST COIN ALERT (PLUG-IN TYPE, USES DS508 SOCKET A/C TYPE (24VAC) USE WITH AC TIMERS, $80.00 C WITH LAST ALERT AND EXTRA TIME OPTIONS DS508 8 PIN SOCKET (CAN BE DIN RAIL MOUNTED) $5.83 C LC525-AC SAME AS LC521-AC NO PLUG IN HOUSING (24VAC) $41.67 C BT/LTT- CREDIT CARD PROGRAM CHIP AND EEPROM –(“CARD DISPLAY PROTOCOL™) $88.30 C CDPROGRAM BT/LTT-LUCKY LUCKY TIME CHIP AND EEPROM INCLUDES CREDIT( “CARD DISPLAY PROTOCOL™) $88.30 C BT10 OBSOLETE NO REPLACEMENT AVAILABLE BT12-912 RED ACRYLIC LENS FOR BT8B STAINLESS STEEL ENCLOSURE $10.95 C BT12-922 RED ACRYLIC LENS FOR BT9 STAINLESS STEEL ENCLOSURE $15.95 C BT32-S SPECIAL PROGRAM PROCESSOR CHIP $103.13 C

Page 34

MODEL NUMBER DESCRIPTION MSRP

DISC. CODE

ULTRA BRIGHT **BT922** JUMBO TWO TIMER™ U.S. PATENT #5,371,681 BT922 ULTRA BRIGHT JUMBO TWO TIMER- MOUNTED IN A STAINLESS STEEL CASE W/ LEXAN® $997.95 C WINDOW. LARGE ULTRA BRIGHT RED LED DISPLAY AREA (2” HIGH x 16” LONG) WITH ALL THE SAME GREAT FEATURES OF IDX’S BT912 BIG TIME TWO TIMER PLUS ADDITIONAL FEATURES. STANDARD FEATURES ARE THE ULTRA HIGH BRIGHT RED LEDS FOR DIRECT SUNLIGHT, OPTIONAL (-G) GREEN OR (-Y) YELLOW ULTRA BRIGHT LED AT NO ADDITIONAL COST, OUTPUT CAN SWITCH OUT MULTI-PULL VOLTAGES 5 TO 24VAC/VDC OR 115VAC – 5AMP SINGLE POLE RELAY OUT PUT, HORN OUTPUT AND LC525-AC HORN MOUNTED. SAME OPTIONS AS BT912- (-B) BURGLAR ALARM, (-D) DISABLE COIN “XEPTOR”. THE BT922 SCROLLS THE SERVICE THAT IS IN USE EVERY 10 SEC. WHILE COUNTING DOWN. SIZE 22.25” W x 7.35” H x 2.5” D REMOTES FOR IDX DISPLAY AND DISPLAY TIMERS RC800 REMOTE CONTROL TO FIELD CHANGE YOUR SCROLLING MESSAGE IN THE BT800-R, BT800B, $153.85 B BT802B, BT810B, BT902, BT912, BT922, LTT802, LTT800 & GT1200 FOR ADVERTISING. IT CAN ALSO CHANGE CYCLE TIMES, COINS TO START, CLEAR COIN COUNTS, SET TIME FOR LAST MIN. ALERT AND FIELD CHANGE 3 PERSONALIZED MESSAGES TOTALING 108 CHARACTERS. SMART REMOTE CONTROL IR800 THE Interface® COMBINES THE BEST FEATURES OF OUR HANDHELD REMOTE (RC800), SECURITY $230.77 B W/ INFRARED TO RETRIEVE COIN COUNTS; CHANGE MESSAGES ON BT800B OR BT802 BIG TIME DISPLAY / BT912 BIG TIME TWO TIMER, BT922 JUMBO TWO TIMER, OR BT810B DRYER DISPLAY; PROGRAM FREE WASH CYCLE IN LTT802 LITTLE TWO TIMER / BT902 BIG TIME TWO TIMER / BT912 / BT922 JUMBO TIME. **NOT TO BE USED WITH GT 200 OR GT1200** IRM800 RECEIVERS FOR IR800 TO CONVERT IDX DISPLAYS OR DISPLAY TIMERS TO INFRARED REMOTE $53.82 B CONTROL USED W/ LTT802, BT902, BT912 SERIES OF TIMERS WITH BT6 OR LATER PROCESSOR **NOT TO BE USED WITH GT 200 OR GT1200** ACCESSORY PARTS FOR BIG TIME, LITTLE TWO TIMER & GIGA TIMER BT FRAGRA WIRING WIRING HARNESS FOR BT912FRAGRA TO CONVERT FROM BT902FRAGRA $33.60 A BT IVS WIRING WIRING HARNESS FOR BT902IVS & BT907IVS $33.60 A BT/LTT- CREDIT CARD PROGRAM CHIP AND EEPROM –(“CARD DISPLAY PROTOCOL™) $88.30 C CDPROGRAM BT/LTT-LUCKY LUCKY TIME CHIP AND EEPROM INCLUDES CREDIT( “CARD DISPLAY PROTOCOL™) $88.30 C BT10 OBSOLETE NO REPLACEMENT AVAILABLE BT12-912 RED ACRYLIC LENS FOR BT8B STAINLESS STEEL ENCLOSURE $10.95 C BT12-922 RED ACRYLIC LENS FOR BT9 STAINLESS STEEL ENCLOSURE $15.95 C BT13 OBSOLETE REPLACED BY BT15 BT32-S SPECIAL MODIFIED PROGRAM PROCESSOR CHIP $103.13 C

Page 35

MODEL NUMBER DESCRIPTION MSRP

DISC. CODE

ACCESSORY PARTS FOR BIG TIME, LITTLE TWO TIMER & GIGA TIMER BT10 ***DISCONTINUED*** BT11 ***DISCONTINUED*** BT12-912 RED ACRYLIC LENS FOR BT8B STAINLESS STEEL ENCLOSURE $10.95 C BT13 ***DISCOUNTED*** REPLACED BY WITH BT15 BT13B WHITE BOX ONLY (LESS COVER) FOR BT800B OR BT902 $74.91 B BT15 ENCLOSURE FOR BT800 (COMPLETE W/COVER & BOTTOM) (DECAL-NOT INCLUDED) $98.50 B CASE SIZE 10”W x 7.1”H x 3”D BT15-FC NEW FRONT COVER FOR BT15 ENCLOSURE USED W/BT800, BT902 (DECAL-NOT INCLUDED) $48.95 B BT15-H GRAY BOX ONLY (LESS COVER) FOR BT15 ENCLOSURE - BT800B, BT902, BT912-M, DD910-M $74.91 B BT20 EEPROM WITH MESSAGE PLUG IN $20.00 C BT31 PROCESSOR CHIP FOR BT800-R FOR 72 CHARACTER MESSAGE $68.33 C BT32 PROCESSOR CHIP FOR BT902 / BT912 $68.33 C BT32-S SPECIAL MODIFIED PROGRAM PROCESSOR CHIP $103.13 C BT33 REMOTE JACK (BROWN BOX ONLY) $8.25 C BT39-B DECAL FOR FRAGRAMATIC $15.64 C BT40 DECAL FOR BT800B, HD800B, BT802B, BT810B (PLACE ON BT10) $10.51 C BT40-B DECAL FOR BT900 (PLACE ON BT13) BT912, BT907 $15.64 C BT51 HIGH OUTPUT LED SEGMENT $21.67 C BT51-UR RED ULTRA BRIGHT LED $40.00 C BT52 REMOTE JACK AND CABLE FOR RS-232 (BT902) $16.66 C BT53 REMOTE JACK AND CABLE FOR BT800A WITH FORK CONNECTORS $16.66 C BT54 COILED CORD FOR THE RC800 $16.66 C BT60 LARGE 6 PIN PLUG WITH 4 CONTACT ***SPECIAL ENDS FOR RC800 COILED CORDS $0.54 B BT62 HAND CRIMPING TOOL FOR COILED CORDS $27.27 A BT65 IMPACT SENSOR WITH 15 FEET OF WIRE FOR BURGLAR ALARM $33.50 C MA70-V ISOLATED 24VAC POWER SUPPLY & DISABLE RELAY MODULE FOR BILL ACCEPTORS WHEN TIED $33.50 C TO VENDER TIMER LTT10 RED ACRYLIC LENS FOR FACE OF LTT800 & LTT802 $4.95 C LTT11 LTT HOUSING COMPLETE – RED LEXAN $10.00 C LTT11-FC LTT FRONT COVER WITH 4 POSTS- RED LEXAN $6.66 C LTT11-H LTT HOUSING LESS FRONT COVER – RED LEXAN $8.33 C LTT20 EEPROM WITH MESSAGE PLUG IN $20.00 C LTT30 PROCESSOR CHIP FOR LTT800 & LTT802 $68.33 C MB199-23 KEY SWITCH TO KEEP UP WITH WASH DOWN TIME $44.15 A LTT41-P1 WIRING HARNESS FOR P-1 HOOK UP ON LTT SERIES $15.31 B LTT41-P3 WIRING HARNESS FOR P-3 DISABLE ON LTT SERIES $15.31 B LTT41-P3S WIRING HARNESS FOR P-3 HOOK UP WITH ALL OPTIONS $16.85 B LTT51 HIGH OUTPUT LED SEGMENT FOR LTT800 & LTT802 $21.67 C

STAINLESS STEEL COVERS FOR BT800B, BT802B, BT810B, BT902, IN BT13 ENCLOSURE & BT922

BT8 STAINLESS STEEL COVER SLIDE OVER WITH MOUNTING TABS SIZE 10.25”W x 7.25”H x 3.25”D $82.85 B BT8B STAINLESS STEEL ENCLOSURE W/ RED LENS, HINGED DOOR & CAM LOCK FOR BT800B-E, BT912, $195.00 B DD810B, & DD910 SIZE 12” W x 7.35” H x 2.5” D BT8H STAINLESS STEEL COVER, SLIDE OVER w/ HINGED FRONT COVER. FASTEN BACK OF BT8H TO $131.88 B WALL. COVER HINGE WILL OPEN. LOCK WITH 3 OF YOUR TAMPER PROOF SCREWS. SIZE 10.25”W x 7.25”H x 3.25”D BT8E STAINLESS STEEL ENCLOSURE (ONLY 2” DISPLAY SHOWS) W/CAM LOCK & REMOVABLE SERVICE $172.31 B DOOR. OVERALL SIZE 12”W x 10”H x 3.75”D BT8ED STAINLESS STEEL DOOR FOR BT8E ENCLOSURE $86.16 B BT8ES STAINLESS STEEL ENCLOSURE FOR BT8E ENCLOSURE $109.66 B BT9 STAINLESS STEEL ENCLOSURE WITH RED LENS, HINGED DOOR & CAM LOCK FOR BT922 & BS820 $205.39 B SIZE 22.25” W x 7.35” H x 2.5” D LTT8H STAINLESS STEEL ENCLOSURE WITH LIFT OUT DOOR & CAM LOCK SIZE- 6”H x 5.563” W x 5” D $100.00 B

Page 36

MODEL NUMBER DESCRIPTION MSRP

DISC. CODE

LITTLE TWO TIMER DIGITAL CLOCK TIMERS FOR METER BOXES “CARD DISPLAY PROTOCOL™” STANDARD, U.S. PATENT #5,371,681

LTT802-??? ****DISCONTINUED*** REPLACED BY PART #GT 200 LTT802-LUCKY ***DISCONTINUED*** REPLACED BY PART #GT 200 & GT 200-A Giga Time™

U.S. PATENT #5,371,681 ULTIMATE IN MULTI TIME DISPLAY TIMERS FOR METERS OR VACUUMS GT 200 THE NEW GIGA TIMER GT200 IS A COMPACT DIRECT FIELD REPLACEMENT MULTI-FEATURE $299.96 E DISPLAY TIMER WHICH HAS MANY FEATURES INCLUDING INDUSTRY STANDARD METER BOX FOOT PRINT, MULTI-VALUE TIMING WITH COUNT-DOWN OR COUNT UP MODE, IDX “Card- Display protocol” AND IDX PATENTED TWO TIME SELECT FEATURE. THIS NEW MODEL EXHIBIT UP TO 20% REDUCTION IN POWER CONSUMPTION OVER THE LTT802 SERIES AND CARRIES A 2-YEAR WARRANTY ON STANDARD HIGH OUTPUT LEDS. OPTIONAL 3-YEAR WARRANTY ON ULTRA BRITE LEDS - ALL WITH 3 BRIGHTNESS SETTINGS THAT ARE FIELD PROGRAMMABLE. 3 FIELD PROGRAMMABLE MESSAGES HAVE BEEN EXPANDED TO 127 CHARACTERS EACH. STANDARD OPERATING VOLTAGE IS 24VAC WITH A 3 AMP RELAY OUTPUT AND OPTIONAL VOLTAGES 12VDC / 12VAC / 24VDC / 34VDC ARE AVAILABLE UP ON

REQUEST. SIZE 3.35”W x 3.80”H x 3.15”D GA 200-A THE NEW GIGA TIMER GT200 W/ OPTION BOARD WILL ENABLE AND RESET “LATCH TIME/GIGA TIME) $374.96 E INCLUDES 8 MULTI TIME FUNCTIONS W/SERVICES MESSAGES, AUDIT FEATURES SEPARATE COIN, BILL, & CREDIT CARD AMOUNTS ALONG WITH TOTAL TIME AND SERVICE TIMES. GIGA TIMER-1200 GIGA TIME IS THE ULTIMATE IN MULTI TIME TIMER TECHNOLOGY. SUPER ULTRA BRIGHT RED LEDS, $594.24 E 1”H x 5.5”W OPENING EASIER TO READ SCROLLING LETTERS BECAUSE OF THE DUAL ROW LED LETTERING, 4 STANDARD SETTINGS FOR TIME AND/OR COINS ON 4 DIFFERENT SERVICE INPUTS, 2 OPTIONAL TIME/COIN PROGRAMMING SETTINGS, 12 PROGRAMMABLE SERVICES 30 CHARACTER SERVICE MESSAGES, SERVICES LIKE “WASH / RINSE / TRIPLE FOAM / etc”, GIGA TIME – “LATCH TIME, BONUS TIME, UNLIMITED TIME, MEGA TIME” WHAT EVER NAME YOU CALL IT, “LUCKY TIME™” PROGRAM, COIN IN BEEP, PROGRAMMABLE LENGTH ON LAST COIN ALERT FROM 1 SECOND TO THE FULL LAST “CARD DISPLAY protocol”™, 1 COIN AND/OR TOKEN INPUT, 1 BILL INPUT, SEPARATE RETRIEVABLE COUNTS, HORN OUTPUT, OPTIONS: LUCKY TIME ACTIVATION BUTTON, SELECTABLE SPECIALS - 3 DIFFERENT TIMES OR DAYS OF WEEK FOR ADDITIONAL PRICE CHANGES PROGRAMMABLE VIA SPECIAL IR REMOTE, SIZE 3.125”H x 5.875”W X 1.78”D. ACCESSORY MODULES FOR GIGA TIMER GT1200 & GT200 LC LAST ALERT HORN MULTI VOLTAGE 9-34 AC/DC- 2 WIRE CONNECTION $41.67 C LC521-AC LAST MINUTE ALERT PLUG-IN TYPE, USES DS508 SOCKET (A/C TYPE FOR 24VAC ONLY) $80.00 C DS508 PLUG IN BASE FOR LC521-AC HORN $5.83 C LC525-AC SAME AS LC521-AC W/ NO PLUG-IN HOUSING. INCLUDES “L” BRACKET FOR MOUNTING. $41.67 C LAST COIN / LAST MINUTE ALERT LC521-DC LAST COIN ALERT (PLUG-IN TYPE, USES DS508 SOCKET) D/C TYPE (24VAC) USE WITH AT401D-L, $80.00 C AT402-L & AT403-L LC521-AC LAST COIN ALERT (PLUG-IN TYPE, USES DS508 SOCKET) A/C TYPE (24VAC) USE WITH AT411E-L, $80.00 C AT412-L, BT800B-H, BT802B-H, BT902-H, BT912, BT922 AND LTT802-H. LC525-AC LAST COIN ALERT SAME AS LC521-AC WITH NO PLUG IN HOUSING (24VAC) $41.67 C LC526-AC/DC LAST ALERT MULTI VOLTAGE 9-28VAC OR 40VDC RED & BLACK WIRES $41.67 C LC525-DC LAST COIN ALERT SAME AS LC521-DC WITH NO PLUG IN HOUSING (24VAC) $41.67 C DS508 8 PIN SOCKET (CAN BE DIN RAIL MOUNTED) $5.83 C

Page 37

MODEL NUMBER DESCRIPTION MSRP

DISC. CODE

ZOLAR™

THE ULTIMATE IN FREEZE CONTROLS Z440-24 ZOLAR IS THE ULTIMATE IN ANTIFREEZE CONTROL SYSTEMS. UP TO 4 DIFFERENT FIELD $553.77 B PROGRAMMABLE 3AMP RELAY OUTPUTS WHICH CAN SWITCH OUT DIFFERENT VOLTAGES – 24VAC, 115VAC OR 220VAC TO CONTROL DEVICES LIKE N/O OR N/C VALVES, LIGHT CONTACTORS, FLOOR HEATERS, TURN OFF AUTOMATIC. TURN ON EQUIPMENT ROOM HEATER OR AIR CONDITIONER. VALVES CAN BE SET FOR STEADY ON AND/OR CYCLING. AUTO DIALER OUTPUT CAN BE SET IF AN ALARM CONDITION OCCURS OR IF THERE IS A POWER FAILURE. FIELD PROGRAMMABLE VIA 4 SIMPLE BUTTONS OR RC800 HAND HELD REMOTE. DIGITAL DISPLAY WILL SHOW CURRENT TEMPERATURE, DAYS POWERED, DAYS BELOW FREEZING & MORE, THERE ARE 6 STATUS INDICATOR LED, ZOLAR ALSO CAN CONTROL UP TO 10-LOW PRESSURE / FOAM BLOWER MODULE (Z-FB880) TO KEEP YOUR BRUSHES AND/OR TRI COLOR. FOAMING PRODUCTS FROM FREEZING STANDARD 1 50’ TEMPERATURE SENSOR AND UP TO 3 ADDITIONAL TEMPERATURE SENSOR & OR AMBIENT LIGHT PROBES (Z-440LP) POLY CARBONATE CASE SIZE 10”W x 7.1”H x 3”D WITH MOUNTING TABS Z-FB880 FOAM BLOWER MODULE Z-FB880 IS FIELD PROGRAMMABLE TO BLOW OUT UP TO 8 SEPARATE $176.92 B VALVES EACH AFTER A SIGNAL IS RECEIVED FROM ZOLAR. FOAM BLOWER WILL NOW WAIT UNTIL ONE OF THE INPUTS IS ACTIVATED FOR 10 SECONDS, WHICH WILL ARM THE UNIT. ONCE POWER HAS BEEN REMOVED THE UNIT WILL WAIT 10 SECONDS TO SEE IF POWER IS REAPPLIED BEFORE STARTING THE BLOW DOWN CYCLE FOR THAT ONE INPUT. SIZE 7.5 W” x 3.375 H” x 1.375” D WITH MOUNTING TABS ACCESSORIES FOR ZOLAR Z440LP-50 AMBIENT LIGHT SENSOR TO CONTROL OUTSIDE OR INSIDE LIGHTS WITH 50’ CABLE $39.67 B Z440TP-50 TABLATURE SENSOR PROBE WITH 50’ SHIELDED CABLE $39.67 B Z-07S ISOLATE INPUTS FOR FOAM BLOWER $33.50 C

BLOW DOWN TIMER AF411 BLOW DOWN TIMER FOR AUTOMATIC CAR WASH THAT CAN BE ACTIVATED BY TREADLE $176.95 C SWITCH, THERMOSTAT OR TIMER IN SELF SERVICE BAYS. SIZE 5.375” L x 3.563” W x 1.75” H MODULES TO CONTROL LOW PRESSURE DELIVER SYSTEMS & REPLACE BLADDER TANKS MX8 24VAC MULTIPLEXED CONTROL – 2 SEC ON & OFF DELAY. MONITOR 8 INPUTS FROM BAY $109.95 C LOCATION TO TIRE CLEAN OR ANY OTHER LOW PRESSURE SYSTEM. WILL TURN ON THE OUTPUT DEVICE MOTOR, PUMP, ETC. WILL ALSO ELIMINATE LOCK UP ON AIR PUMPING SYSTEMS. OUTPUT IS 24VAC OR 120VAC. SIZE 5.375” L x 3.563” W x 2.375” H MX9 24VAC MULTIPLEXED CONTROL – NO TIME DELAY. MONITOR 8 INPUTS FROM BAY LOCATION TO $109.95 C TIRE CLEAN OR ANY OTHER LOW PRESSURE SYSTEM. WILL TURN ON THE OUTPUT DEVICE MOTOR, PUMP, ETC. WILL ALSO ELIMINATE LOCK UP ON AIR PUMPING SYSTEMS. OUTPUT IS 24VAC OR 120VAC. SIZE 5.375” L x 3.563” W x 2.375” H MX10 24 VAC MULTIPLEXED CONTROL – 1 SEC ON & OFF DELAY. MONITOR 8 INPUTS FROM BAY $109.95 C LOCATION TO TIRE CLEAN OR ANY OTHER LOW PRESSURE SYSTEM. WILL TURN ON THE OUTPUT DEVICE MOTOR, PUMP, ETC. WILL ALSO ELIMINATE LOCK UP ON AIR PUMPING SYSTEMS. OUTPUT POWER IS 24VAC OR 120VAC. SIZE 5.375” L x 3.563” W x 2.375” H

Page 38

MODEL NUMBER DESCRIPTION MSRP

DISC. CODE

MULTI FOAM BRUSH OR PROTECTANT MULTIPLEX CYCLER MX48 MULTIPLEX CONTROLLER WITH 8 INPUTS & 4 OUTPUTS TO REPLACE THE COSTLY PLC’S AND / $375.00 D OR MULTI RELAY SETUPS USED FOR THE MULTICOLOR LOW PRESSURE WAX & BRUSH SYSTEMS. MX48 HAS 1 CONSTANT OUTPUT AND 3 SEPARATE TIMED OUTPUTS CONTROLLED BY 1 SWITCH W/ 5mSec.OVER LAP. SAME FOOT PRINT AND ELECTRICAL SPECIFICATION AS THE MX8. WHEN MORE THAN 8 INPUTS ARE NEEDED; USE THE MX9 TO ADD UP TO 7 ADDITIONAL INPUTS. SIZE 5.375” L x 3.563” W x 2.375” H INLINE ON & OFF DELAYS MX1 THIS CONTROL ELIMINATES THE HIGH PRESSURE MOTOR STARTER FROM PICKING UP & $58.34 C DROPPING OUT AS SOMEONE TURNS THE ROTARY SWITCH FROM ONE OF SERVICE TO THE NEXT. (W/1 SEC DELAY.) SAVES ON THE ELECTRIC BILLS, INCREASES PUMP & CHECK VALVE LIFE. SIZE 2.875” T x 2.375” W x 1.563” H MX2 SAME AS MX1 WITH 2 SEC DELAY $58.34 C MX3 SAME AS MX1 WITH 2 SEC ON & .3 SEC OFF $58.34 C FUSES MENGT-5A FUSE 5 AMP FOR GT 200 $1.49 A MEN5 FUSE 5 AMP FOR TRA183 $4.14 A MEN15 FUSE 15 AMP 13/32” x 1-1/2” $5.37 A TRANSFORMERS & POWER SUPPLIES TRA-5VDC 5 VOLT DC 2AMP POWER SUPPLY FOR WR88 PM $31.48 A TRA-9VDC 9 VOLT DC POWER SUPPLY FOR IR800 $8.28 A TRA-12VDC 12 VOLT DC 500MA POWER SUPPLY USED WITH WICKET NIGHT ACCESS $24.95 A TRA-12VDC 1A 12 VOLT DC 1AMP POWER SUPPLY USED WITH Edge CREDIT CARD READER BY USA TECH $31.48 A TRA24-6 115VAC TO 24VAC: 40 VA OUTPUT TRANSFORMER $16.80 A TRA183 115/208/230 VOLT TO 24VAC: 100 VA TRANSFORMER, FUSED OUTPUT ENCAPSULATED FOR DAMP $57.14 E ENVIRONMENTS. TRA185 115/208/230 VOLT TO 24VAC: 150 VA TRANSFORMER, FUSED OUTPUT ENCAPSULATED FOR DAMP C/F E ENVIRONMENTS. ***SPECIAL ORDER ONLY*** PS-TRA100A24 POWER SUPPLY FOR WICKET KIOSK 90-220 X 24VDC 100W $209.00 A ELECTRICAL ACCESSORIES HM10 HOUR METER 24VAC $55.84 D DPDT RELAY (SPECIFY COIL VOLTAGE) $18.46 D DS508 8 PIN SOCKET (CAN BE DIN RAIL MOUNTED) $5.83 C DS511 11 PIN SOCKET (CAN BE DIN RAIL MOUNTED) $7.25 C CONTACT MODULE CP-CT CURRENT TRANSFORMER DRY CONTACT – FIELD ADJUSTABLE $66.67 A MA70 DRY CONTACT OUTPUT MODULE FOR COIN “XEPTORS”® TO INCREASE COIN PULSE SIGNAL $33.50 C MA70-S ISOLATE 2 DIFFERENT COIN PULSES FROM 2 BAYS OR VAC'S WHEN CONNECTED W/VAC UP $33.50 C SYSTEM SIZE 1.938”L x 1.313”W x .75”D MA70-V ISOLATED 24VAC POWER SUPPLY & DISABLE RELAY MODULE FOR BILL ACCEPTORS WHEN TIED $33.50 C TO VENDER TIMER SIZE 1.938”L x 1.313”W x .75”D MA71 DUAL DRY CONTACT OUTPUT MODULE FOR COIN “XEPTORS”® USED W/ 2 WIRE COIN COUNTERS $33.50 C MA72 QUAD DRY CONTACT OUTPUT MODULE FOR COIN “XEPTORS”® DUAL MA71 $67.00 C SIZE 1.938”L x 1.313”W x 1.5”D MA72-P RELAY OUTPUT MODULE FOR PS200 TO ADD 3RD STACK OPTION ON ONE SERVICE $33.50 C SIZE 1.938”L x 1.313”W x .75”D

Page 39

MODEL NUMBER DESCRIPTION MSRP

DISC. CODE

CONTACT MODULE MA73 DUAL DRY CONTACT OUTPUT MODULE FOR COIN “XEPTORS”® DUAL MA74 $67.00 C 1.938”L x 1.313”W x 1.5”D MA74 QUAD DRY CONTACT OUTPUT MODULE FOR COIN “XEPTORS”® USED TO ISOLATE DIFFERENT $33.50 C TYPES OF COIN SIGNALS OR POWER OUTPUTS SIZE 1.938”L x 1.313”W x .75”D MA75 OUTPUT MODULE FOR ACW TO CPU $277.79 C MA76 LATCH TIME MODULE 24VAC USED TO DISABLE OR ENABLE LATCH TIMER MODELS BT912-T, $58.33 C LTT802-T, AND GT1200 WHEN USING GIGA TIMER OPTION SIZE 1.938”L x 1.313”W x .75”D MA76DCN/012 LATCH TIME MODULE 12VDC USED TO DISABLE OR ENABLE LATCH TIME $58.33 C MA76DCN/024 LATCH TIME MODULE 24VDC USED TO DISABLE OR ENABLE LATCH TIME $58.33 C MA77 COIN PULSE INTERFACE FROM A POWER( 24VAC) SOURCE TO A COMMON PULSE $33.50 C MA79 POWER RELAY USED W/CREDIT CARD SYSTEM - SWITCH OUT POWER FOR COUNT UP SYSTEMS $33.50 C OR FOR INHIBIT CIRCUIT IN AUTOMATICS MA-VEND12DC WIRING & 12VDC POWER INTERFACE MODULE FOR LAUREL ELECTRONIC DROP SHELF VENDER, $58.00 C 1 PER SHELF REQUIRED SIZE 1.938”L x 1.313”W x .75”D MA-VEND24AC WIRING & 24VAC POWER INTERFACE MODULE FOR LAUREL ELECTRONIC DROP SHELF VENDER, $58.00 C 1 PER SHELF REQUIRED SIZE 1.938”L x 1.313”W x .75”D DEMOS AND TOOLS METER BOX DEMO SD101 METER BOX DEMO FOR DISPLAY ON DISTRIBUTOR COUNTER $1,895.85 B COMPLETE DEMO READY TO PLUG INTO 120VAC MB155 “BIG BOX”, DEC155, WITH LTT8-LUCKY, LC525-AC,X10, ASSORTED X-MARK”® TOKENS, PUSH BUTTON SWITCH FOR COIN PULSES, IRM800, & IR800 REMOTE. PS200 PermaSwitch PS200® 10 POSITION ELECTRONIC SWITCH $375.00 B LIGHTED FRAME DEMO SD100 MENU SIGN INSIDE OF LIGHTED FRAME FOR DISPLAY ON DISTRIBUTOR COUNTER. $1,383.20 B COMPLETE DEMO READY TO PLUG INTO 120VAC, WITH 10 POSITION ROTARY SWITCH, BT902- BHP BIG TIME, MS100-10 MENU WITH REMOTE, LAST COIN ALERT, & PUSH BUTTON TO SIMULATE COIN INPUT. JUMBO TIME DEMO SD102 JUMBO TIME TWO TIMER DEMO $1383.20 C BT922 COMPLETE WITH 120VAC TRANSFORMER, POWER CORD, IRM800 INFRARED RECEIVER, IR800 REMOTE, 10 POTION ROTARY SWITCH, & PUSH BUTTON X-MARK® TOKEN AND “XEPTOR”® TESTER TESTERS AND TOOLS BT62 METAL HAND CRIMPING TOOL FOR COILED CORDS $27.27 A BT/LTT199-1 CABLE HOOKUP BETWEEN DISPLAY TIMERS AND LAPTOP OR COMPUTER $20.00 A MB199-51 CONTROL CABLE / 2-TWISTED PAIRS OF SHIELDED ALL COPPER CABLE sold by the foot $1.16 A

X10199-1 “XEPTOR”® CABLE HOOKUP BETWEEN RS232 PORT AND LAPTOP OR COMPUTER TO MONITOR $18.46 A AND / OR CHANGE CONFIGURATION OF “XEPTORS”®

X1050-TS TEST STAND FOR MA800’S AND X10”S WITH 24VAC POWER SUPPLY DOES NOT INCLUDE XEPTOR $133.33 A

Page 40

X-MARK® or SMART-MARK® METAL CODED TOKENS FOR MODEL X10 “XEPTORSâ

PRICING ON NORMALLY STOCKED SINGLE METAL X-MARK TOKENS

SINGLE METAL **STOCK** X-Mark TOKENS

DIAMETER THICKNESS ALLOY 500 5,500 10,500 25,500 50,500+

0.900” 0.055” TSA6 $ .44 $ .42 $ .40 $ .38 $ .37 0.900” 0.067” TSA6 $ .44 $ .42 $ .40 $ .38 $ .37 0.900” 0.068” NPB $ .44 $ .42 $ .40 $ .38 $ .37 0.900” 0.067 S/S $ .44 $ .42 $ .40 $ .38 $ .37 0.984” 0.055 TSA $ .49 $ .47 $ .45 $ .42 $ .39 0.984” 0.080 TSA $ .49 $ .47 $ .45 $ .42 $ .39 0.984” 0.055 TSA6 $ .49 $ .47 $ .45 $ .42 $ .39 0.984” 0.067 TSA6 $ .49 $ .47 $ .45 $ .42 $ .39 0.984” 0.080 TSA6 $ .49 $ .47 $ .45 $ .42 $ .39 0.984” 0.067 752 $ .49 $ .47 $ .45 $ .42 $ .39 1.073” 0.055 TSA $ .59 $ .56 $ .54 $ .51 $ .48 1.073” 0.055 TSA6 $ .59 $ .56 $ .54 $ .51 $ .48 1.073” 0.067 TSA6 $ .59 $ .56 $ .54 $ .51 $ .48 1.073” 0.080 TSA6 $ .59 $ .56 $ .54 $ .51 $ .48 1.073” 0.067 TSA9 $ .59 $ .56 $ .54 $ .51 $ .48 1.073” 0.075 NPB $ .59 $ .56 $ .54 $ .51 $ .48 1.073” 0.067 752 $ .59 $ .56 $ .54 $ .51 $ .48 1.125” 0.055 TSA $ .63 $ .60 $ .57 $ .55 $ .51 1.125” 0.067 TSA6 $ .63 $ .60 $ .57 $ .55 $ .51

BI-METAL STOCK X-Mark TOKENS

Diameter PART NUMBER 500 5,500 10,500 25,500 50,500+

0.984” BX-D0-55-D-3 $ .65 $ .62 $ .59 $ .56 $ .54 1.073” BX-33-33-D-4 $ .68 $ .65 $ .62 $ .58 $ .56 1.073” BX-33-55-D-4 $ .68 $ .65 $ .62 $ .58 $ .56

Custom Tokens minimum order per token new or reorder -10,000, 25,000 or 50,000+ call for pricing

** One time Die and Art work charge on all new custom token orders is $800.00. **

TERMS FOR CUSTOM- 50% DOWN PLUS $800.00 ART WORK & DIE CHARGES- BALANCE PRIOR TO SHIPPING

Due to the volatility of the metal market, Custom Quoted Token pricing is only good for 30 days.

The advanced technology of the IDX X10 series of Xeptors and the X-Mark or Smart-Mark site-specific tokens is the only token system that eliminates cross play (acceptance of other companies, or competitors tokens) in the car wash industry. This is achieved because of IDX’S patented technology and only IDX can guarantee that we will never sell a duplicate dedicated token that has been assigned to you within 100 to 150 miles of your establishment. The X10 Xeptor is the only token acceptor that does not allow cross play when programmed with the assigned X-Mark or Smart-Mark site-specific token and rejects all other non-coded pieces of metal out there disguised as a token. IDX monitors the placement of each X-Mark & Smart-Mark site-specific token code for each company location and matches it with the correct model of X10 Xeptor. Other manufactures of coin acceptors and tokens cannot match this guarantee. TO ORDER X-MARK OR SMART-MARK CODED TOKENS **ORDER BY SIZE, METAL & CODE SET** NEW CODES WILL BE ASSIGNED BY ZIP CODE TO AVOID DUPLICATION OF CODE IN SAME AREA

**PLEASE HAVE NAME OF CAR WASH, CITY, STATE, & ZIP CODE WHEN ORDERING**

X-MARK® or SMART-MARK® METAL CODED TOKENS

FOR MODEL X10 “XEPTORSâ PRICING ON NORMALLY STOCKED SINGLE METAL X-MARK TOKENS

Page 41

COMMON METAL CONTENT FOUND IN USE IN CAR WASH & ARCADE TOKENS

ALLOY NICKEL COPPER ZINC STOCK SIZE

260 0 70% 30% X 0.900, 1.073 & 1.125”/ Nickel Plated 240 0 80% 20% 230 0 85% 15%

752 18% 65% 17% X 0.986 / 1.073 x 0.067” STAINLESS STEEL X 0.900 / 0.984” x 0.067” REEDED

TSA 1.9% 73.7% 24.4% X 0.986 / 1.073 / 1.125” x 0.055” TSA 1.9% 73.7% 24.4% X 0.986” x 0.080” **REEDED TSA6 6% 70% 24% X 0.900/ 0.986/1.073” x 0.055” **REEDED TSA6 6% 70% 24% X 0.900 / 0.986 / 1.073/ 1.125” x 0.067”

TSA6 6% 70% 24% X 0.986 & 1.073” x 0.080”** REEDED TSA9 9% 70% 21% X 0.1073” X 0.067”

BI- METAL TSA / EDGE METAL – 752 / CENTER METAL X 0.984 / 1.073”

TO ORDER X-MARK OR SMART-MARK CODED TOKENS **ORDER BY SIZE, METAL, & CODE SET** NEW CODES WILL BE ASSIGNED BY ZIP CODE TO AVOID DUPLICATION OF CODE IN SAME AREA

**PLEASE HAVE NAME OF CAR WASH, CITY, STATE, & ZIP CODE WHEN ORDERING**

INDIVIDUALIZE YOUR X-MARK STOCK TOKENS

ADD A CUSTOMIZED MYLAR FOIL IMAGE OF 1 TO 3 COLORS WITH A SILVER BACK GROUND. OR ADD ONE OF THE STOCK AMERICAN FLAG 4 COLOR IMAGES ON MYLAR OR A HOLOGRAM

IMAGE OF A SOARING EAGLE WITH THE AMERICAN FLAG IN IT’S BACKGROUND QUANTITY 100-500 600-1000 1000+ TFC-FLAG 4 COLOR 15MM WAVING AMERICAN FLAG $0.35 $0.30 $0.28 THC-IDX EAGLE 4 COLOR 15MM SOARING EAGLE ON AMERICAN FLAG $0.45 $0.41 $0.37

EACH TOKEN WILL HAVE THE X-MARK OR SMART-MARK CODE ON BOTH SIDES OF THE TOKEN AND THE MYLAR OR HOLOGRAM ONLY ON ONE SIDE

THE MYLAR AND HOLOGRAM X-MARK TOKEN SIZES: 15mm IMAGE ” 0.900”/ 0.986” / 1.073”/ 1.125” TOKEN

CUSTOM 1 COLOR 15mm MYLAR FOIL IMAGES FOR X-MARK OR SMART-MARK TOKENS

$0.21 EACH AT 6,000 IMAGES ONLY CUSTOM 2 COLOR 15mm MYLAR FOIL IMAGES FOR X-MARK OR SMART-MARK TOKENS

$0.29 EACH AT 6,000 IMAGES ONLY

CONSULT IDX FOR LARGER QUANTITY PRICING

CUSTOM 2 COLOR 15mm MYLAR FOIL IMAGES MINIMUM ORDER IS 6,000 PIECES ONE TIME CUSTOM ART-WORK & DIE CHARGE IS $350.00. MINIMUM REORDERS ARE 6,000 PIECES. DELIVERY ON CUSTOM

MYLAR IMAGES AFTER APPROVED ARTWORK, EXPECT LEAD-TIMES TO BE 3 TO 4 WEEKS **TERMS FOR CUSTOM - 50% DOWN PLUS ART WORK & DIE CHARGES- BALANCE PRIOR TO

SHIPPING**

Page 42

OEM CROSS REFERENCE REPLACEMENT PARTS 4/29/2015

XEPTORS for AUTO ENTRY Mfg American Changer Exact One ( EXACTA )

X10CB5AC34A – standard X10SR39C34F - standard X10CB39C34A - optional X10SR5AC34F - optional

Hamilton Mfg Innovative Controls ACW 1//2/3 X10CM5AC30F – standard X10CHR5AC30A - standard X10CM39C30F – optional

X10CH39C30A - optional MA800CHOC30A - optional

ACW4 Standard Change Makers X10CZ5AC30A - standard X10CM5AC30F – standard X10CZ39C30A - optional X10CM39C30F – optional MA803CZC34A – optional X10DM5AC36R – standard GOLDLINE X10DM39C36R - optional

X10SG5AC34A – standard X10SG39C34A – optional Unitec Electronics HTK WASH SELECT II

X10CM5AC34A – standard X10DM5AC34R – standard X10CM39C34A – optional X10DM39C34R – optional

PORTAL MA803SM0C30F – standard

XEPTORS for EQUIPMENT Mfg

***OPTIONAL -- MOST IDX XEPTOR WILL REPLACE VACUUM MFG STANDARD***

D & S Mfg Doyle Mfg

X10SR5AC30F – standard MA800CR0C30F – standard X10SR39C30F – optional X10CR5AC30F – optional MA800SR0C30F – optional X10CR39C30F – optional

IVS / GinSan Fragramatic MA820CR0C34F – standard MA820CF0C34F – standard **IVS OLD STYLE ROUND VACUUM** *OLD STYLE FRAGRANCE & COMBO VACUUM* MA800CR0C30C MA800CF0C30C X10CR5A0C30F – optional X10CF5A0C30F – optional X10CR390C30F – optional X10CF390C30F – optional J.E.Adams Jim Coleman

MA800CR0C30F – standard MA800CR0C30C – standard X10CR5A0C30F – optional X10CR5A0C30C – optional

X10CR390C30F – optional X10CR390C30C – optional

Ryko Mfg National Pride MA812CR0C30F - standard MA800SR0C30F- standard

X10CR5A0C30F – optional X10CR390C30F – optional CCSI International pet washes

X10CR6AC30F – standard Etowah Valley Premier Touchless Drying X20-F OEM unit Replacement model / MA800CR0C34F X10CR5AC30F – standard

Page 43

XEPTORS for DROP SHELF VENDOR Mfg

D & S Mfg. Laurel Metals X10SR5AC30F – standard MA800CL00C30A – standard X10SR39C30F – optional X10CL5AC30A – optional MA800SR0C30F – optional X10CL39C30A – optional

NON- DISPLAY TIMERS for VACUUM Mfg

D & S Mfg Doyle Mfg AT411EL-D&S – standard AT411E - standard Replacement AT411E-L AT412 – 220VAC AT422 - 2 timer IVS / GinSan Fragramatic AT411E – standard AT411E – standard

AT412 – 220VAC AT422 - 2 timer

J.E.Adams Jim Coleman AT411E – standard AT411E – standard

AT412 – 220VAC AT414 220VAC - with AT422 - 2 timer 24vac out power for Coin Acceptor

Ryko Mfg Premier Touchless Drying AT412 AT411E-L AT422-L

DISPLAY TIMERS for VACUUM Mfg

D & S Mfg Doyle Mfg BT912D&S – standard Giga Timer-1200 - standard Replacement board P912-D BTC907DOYLE-U - standard

LTT802-HP - optional / Replaced by GT200 Replacement Board PC907-HSU GT1200 - optional BTC912DOYLE-U – standard Replacement Board PC912-U IVS / GinSan Fragramatic BT912-IVS – standard BT902FRAGRA– Replaced by BT912FRAGRA

Replacement board P912-D Replacement board - P912-BHS BT907-IVS – standard LTT802FRAGRA - standard Replacement board P907-HS LTT802-FH -optional / Replaced by GT200 RYKO Mfg LTT802RYKO - standard

J.E.Adams LTT802-FH – optional / Replaced by GT200 Premier Touchless Drying

BT907 BT912-PREMIER Replacement board P907-HS Replacement board P912-D

Page 44

When you try the others,

Come To IDX® and Use The Best.

X10 MA800 GEMINI TWIN II™

LITTLE TWO TIMER™ BIG TIME ™

ZOLAR™ FOAM BLOWER™ AT411E

JUMBO TIME™ PERMA SWITCH™

Lucky Time™ GigaTime™

“CARD-DISPLAY PROTOCOL™”

MX8 MX1

MX48 FOAM-I-NATOR

X-MARK® XEPTOR®

WicketID™ Wicket Jackpot Display

Wickets-NTS™ ASGARD™

Wash Telemetry ™ SCADAWash™