IDEN

TIT

Y™ FLO

OR

/WA

LLG

LAZ

ED

CE

RA

MIC

/ CO

LOR

BO

DY

™ P

OR

CE

LAIN

Cover photo features Imperial Gold, Fabric (Unpolished) 12 x 24 and 24 x 24 field tile on the floor. Wall features Imperial Gold, Gloss 8 x 20 wall tile and decorative accent.

Envelop your space with the contemporary elegance of

Identity Floor, a ColorBody™ porcelain tile with three

unique surfaces. Fabric resembles fine tweed with subtle

grains and metallic specks. Grooved mirrors the depth

of raked sand. Cement embodies the modern style of a

cement-look, combined with movement and variation. This

line contains a vast range of colors, sizes, and finishes that

can bring to life the “identity” of your space.

Add more personality to your space with the addition of

Identity Wall. Available in the same seven coordinating

colors as the floor tile, this wall line comes in a

contemporary 8 x 20 size, which is available in gloss and

matte finishes. A coordinating gloss and matte decorative

accent is also available in each color and is sure to make a

subtle yet memorable statement.

floo

r •

wal

l •

coun

tert

op

GLAZED CERAMIC

COLORBODY™ PORCELAIN

IDENTITY™ WALLIDENTITY™ FLOOR

Photo features Paramount White Matte 8 x 20 wall tile in a diagonal grid pattern on the wall. Floor features Twilight Black Grooved (Unpolished) 12 x 24 field tile in a grid pattern.

Floor TileFABRIC (LIGHT POLISHED & UNPOLISHED)

METRO TAUPE MY22

PARAMOUNT WHITE MY20 BISTRO CREAM MY21 IMPERIAL GOLD MY23

OXFORD BROWN MY24 CASHMERE GRAY MY25 TWILIGHT BLACK MY26

GROOVED (12 X 24 ONLY - LIGHT POLISHED & UNPOLISHED)

METRO TAUPE MY32

PARAMOUNT WHITE MY30 BISTRO CREAM MY31 IMPERIAL GOLD MY33

OXFORD BROWN MY34 CASHMERE GRAY MY35 TWILIGHT BLACK MY36

CEMENT (18 X 18 ONLY - UNPOLISHED ONLY)

METRO TAUPE MY42

PARAMOUNT WHITE MY40 BISTRO CREAM MY41 IMPERIAL GOLD MY43

OXFORD BROWN MY44 CASHMERE GRAY MY45 TWILIGHT BLACK MY46

Close-up ofFabric Tile

Close-up ofGrooved Tile

Close-up ofCement Tile

floo

r •

wal

l •

coun

tert

opCOLORBODY™ PORCELAINIDENTITY™ FLOOR

Floor Decorative Accents (Available in Unpolished Fabric only)

CREAM/BROWN MY51 GOLD/BROWN MY53

TAUPE/TAN MY52 WHITE/BLACK MY50

GRAY/BLACK MY54

BISTRO CREAM MY21 METRO TAUPE MY22 IMPERIAL GOLD MY23

OXFORD BROWN MY24 CASHMERE GRAY MY25 TWILIGHT BLACK MY26

PARAMOUNT WHITE MY20

Mosaics (Available in Unpolished Fabric only)

Wall Field Tile (All colors are also available in Gloss Field Tile)

MATTE PARAMOUNT WHITE MY67 MATTE BISTRO CREAM MY69 MATTE METRO TAUPE MY71

MATTE TWILIGHT BLACK MY68

MATTE IMPERIAL GOLD MY70 MATTE OXFORD BROWN MY73MATTE CASHMERE GRAY MY72

Wall Decorative Accents (All colors are also available in Gloss Decorative Accents)

MATTE PARAMOUNT WHITE MY67 MATTE BISTRO CREAM MY69 MATTE METRO TAUPE MY71

MATTE IMPERIAL GOLD MY70 MATTE OXFORD BROWN MY73MATTE CASHMERE GRAY MY72

MATTE TWILIGHT BLACK MY68

Close-up of Wall Decorative Accent

GLAZED CERAMICIDENTITY™ WALLfl

oor •

wal

l •

coun

tert

op

Photo features Oxford Brown (Light Polished) 24 x 24 field tile on the floor and Oxford Brown Gloss 8 x 20 wall tile and Gloss decorative accent on the wall.

SIZES

SQ.FT. CARTON

PCS. PER CARTON

24 x 24 Field Tile (Fabric only)

23-1/2" x 23-1/2" (59.8 cm x 59.8 cm) 15.49 4

12 x 24 Field Tile* (Fabric & Grooved)

11-3/4" x 23-1/2" (29.8 cm x 59.8 cm) 11.62 6

18 x 18 Field Tile** (Fabric & Cement)

17-5/8" x 17-5/8" (44.8 cm x 44.8 cm) 13.07 6

12 x 12 Field Tile (Fabric only)

11-3/4" x 11-3/4" (29.8 cm x 29.8 cm) 11.62 12

1 x 3 Mosaic (Mesh-mounted) (Unpolished Fabric only)

Sheet: 11-3/4" x 11-3/4" (29.8 cm x 29.8 cm) 9.00 9

12 x 24 Decorative Accent 11-3/4" x 23-1/2" (29.8 cm x 59.8 cm) -- 4

n Grooved available in 12 x 24 unpolished and light polished only.

sCement available in 18 x 18 unpolished only.

LINEAR OPTIONS™ SIZES

SQ.FT. CARTON

PIECES PER CARTON

6 x 24 Field Tile 6" x 23-1/2" (14.63 cm x 59.8 cm) 10.65 11

4 x 24 Field Tile 4" x 23-1/2" (9.73 cm x 59.8 cm) 6.46 10

2 x 24 Field Tile 2" x 23-1/2" (4.67 cm x 59.8 cm) 6.66 20

Additional linear and rectangular sizes available through Linear Options™, Daltile’s linear cutting service. Visit www.daltile.com/linearoptions for sizes and order information.

NOTES

Identity Fabric (Light Polish Surface) **Please Read Carefully** Note to Tile Installer: This product is directional by design and MUST be installed with the arrows on the back of each tile facing in the same direction.

Special care should be taken when grouting with dark pigmented colors. A grout release is recommended to prevent finely powdered pigments from lodging in the pores of the tile surface. Use of a latex modified thin-set is recommended for installation.

Since there are variations in all fired ceramic products, the tile and trim supplied for your particular installation may not match these samples. Final color selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards.

For additional information refer to “Factors to Consider” at: www.daltile.com/CommercialFactors

Water, oil, grease etc. create slippery conditions. Floor applications with exposure to these conditions require extra caution in product selection. Not for use on ramps.

INSTALLATION

THICKNESS GROUT JOINT RECOMMENDATION

3/8" 1/8" (3/16" when rectangular sizes are used in a staggered brick-joint pattern, where the overlap does not exceed 33%)

RESIDENTIAL USAGE

FLOORS WALLS COUNTERTOPSEXTERIOR

PATIOSEXTERIOR POOL

DECKS

F W C EP** ED*

All surfaces are suitable for pool linings. *Fabric Unpolished surface only. **Unpolished only.

TRIM

TYPE NUMBER SIZEPCS. PER CARTON

Bullnose (Fabric) (Light Polished & Unpolished) S-44C9 4 x 12 30

Bullnose (Grooved) (Light Polished & Unpolished) S-44F9 4 x 24 10

Bullnose (Cement) (Unpolished) S-44H9 4 x 18 10

Cove Base (Fabric) S-36C9TB 6 x 12 30

Cove Base Outcorner (Fabric) SC-36C9T 1 x 6 15

TEST RESULTS (Unpolished only)

ASTM# RESULT

Water Absorption C373 < 0.5%

Breaking Strength C648 > 550 lbs

Scratch Hardness MOHS 8.0 (6.0 for Twilight Black)

Chemical Resistance C650 Resistant

Coefficient of Friction (Unpolished) C1028 Wet: ≥0.60 Dry: ≥0.70

Coefficient of Friction (Light Polished) C1028 Wet: ≥0.50 Dry: ≥0.60

SLIP RESISTANCE (WET) : 2 & 3The higher the rating, the higher the slip resistance.

1 < .50

2 .50 - .59 (Light Polished)

3 ≥ .60 (Unpolished)

COMMERCIAL USAGE

INTERIOR EXTERIOR

RESIDENTIALLIGHT

COMMERCIAL COMMERCIAL RESIDENTIAL COMMERCIAL

Floors/Patios * * *

Walls/Backsplashes

Countertops

Pool Decking**

Pool Linings

* Unpolished only

** Fabric (Unpolished only)

FABRIC (Unpolished only): Suitable for exterior patios (including pool decks) and walls in freezing and non-freezing climates when proper installation methods are followed.

GROOVED: Suitable for exterior patios (excluding pool decks) and walls in freezing and non-freezing climates when proper installation methods are followed.

CEMENT: Suitable for exterior walls in freezing and non-freezing climates when proper installation methods are followed.

COLORBODY™ PORCELAINIDENTITY™ FLOOR

SHADE VARIATION

MEDIUM (V2)Color variation within each tile.

SIZES

SQ.FT. CARTON

PCS. PER CARTON

8 x 20 Field Tile 7-1/8" x 19-9/32" (20.0 cm x 50.0 cm) 15.06 14

8 x 20 Decorative Accent 7-1/8" x 19-9/32" (20.0 cm x 50.0 cm) -- 14

NOTES

Special care should be taken when grouting with dark pigmented colors. A grout release is recommended to prevent finely powdered pigments from lodging in the pores of the tile surface. Use of a latex modified thin-set is recommended for installation.

Since there are variations in all fired ceramic products, the tile and trim supplied for your particular installation may not match these samples. Final color selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards.

For additional information refer to “Factors to Consider” at: www.daltile.com/CommercialFactors

Water, oil, grease etc. create slippery conditions. Floor applications with exposure to these conditions require extra caution in product selection. Not for use on ramps.

INSTALLATION

THICKNESS GROUT JOINT RECOMMENDATION

5/16" 1/16"

TRIM

TYPE NUMBER SIZEPCS. PER CARTON

Jolly S-5810J 1 x 10 14

TEST RESULTS ASTM# RESULT

Water Absorption C373 < 20.0%

Breaking Strength C648 100-230 lbs

Scratch Hardness MOHS 4.0-6.5

Chemical Resistance C650 Resistant

COMMERCIAL USAGE

INTERIOR EXTERIOR

RESIDENTIALLIGHT

COMMERCIAL COMMERCIAL RESIDENTIAL COMMERCIAL

Floors/Patios

Walls/Backsplashes

Countertops*

Pool Decking

Pool Linings

Suitable for exterior walls in non-freezing climates when proper installation methods are followed.

* Dark colors may show scratches.

RESIDENTIAL USAGE

FLOORS WALLS COUNTERTOPSEXTERIOR

PATIOSEXTERIOR POOL

DECKS

F W C* EP EDSuitable for non-freezing climates when proper installation methods are followed.

*Dark colors may show scratches.

GLAZED CERAMICIDENTITY™ WALL

SHADE VARIATION

MEDIUM (V2)Color variation within each tile.

GLAZED CERAMIC

COLORBODY™ PORCELAIN

IDENTITY™ WALLIDENTITY™ FLOOR

7834 C. F. Hawn Freeway | Dallas, TX 75217 | 214.398.1411 800.933.TILEFor more information about Daltile products and services, visit our website at daltile.com ©

2012

Dal

-Tile

Cor

pora

tion

(6/

12)

SSD

TID

ENT

ITY

By their very design, Daltile products can help make it easier for you to earn LEED™ points and/or points towards many industry leading green home building programs. From using recycled material content to establishing manufacturing facilities within 500 miles of your project, we help ensure you don’t have to compromise your design to be environmentally conscious. For detailed information, visit daltilegreenworks.com.

floo

r •

wal

l •

coun

tert

op