ID-N-SM-JJ0-TQD-00-00XX_IFA - Monoflange [Superlok]-1.pdf

8/17/2019 ID-N-SM-JJ0-TQD-00-00XX_IFA - Monoflange [Superlok]-1.pdf

1/27


2/27


3/27

**********************************************************************************

PLEASE USE the following address to deliver the invoices document and collect

withholding tax slip (Bukti Potong) and VAT Payment slips (SSP):----------------------------------------------------------------------------------

MOHON GUNAKAN alamat berikut untuk mengirimkan dokumen invoices serta mengambil

withholding tax slip (Bukti Potong) dan VAT Payment slips (SSP):

ConocoPhillips Receiving Facility

Cilandak Commercial Estate No. 401

Cilandak, Jakarta 12075

Phone: (62-21) 7854-1000

Fax: (62-21) 7854-2890

P.O. BOX 1473 12000

**********************************************************************************

**********************************************************************************

********************* ADDITIONAL INSTRUCTION *************************************

EXPORT COMPLIANCE: Without prejudice to Vendor's obligations under any applicable

master purchasing agreement or similar arrangement, Vendor agrees to abide by all

applicable export control laws and regulations, including those with respect to the

United States, including, without limitation, those applicable to re- export or the

transfer of controlled technology.

If any license or other authorization is required by such laws or regulations for any

ENVIKA REKATEKNIK PT

JL PUALAM NO1

40265 BANDUNG

Please Deliver To:

ConocoPhillips Indonesia Inc. Ltd.

c/o. Ekanuri Warehouse, Kalijapat 2

Jl. Industri III, No.114310 Tanjung Priok, Jakarta Utara

Delivery date: 19.05.2014

This Purchase Order is subject to our general terms and conditions. Purchase Order number must be

quoted in all invoice and delivery documents.

___________________________________________________________________________________

PO number: 3000402653

Date: 06.03.2014

Contact person/Telephone

ID/Valves/021 78541000

Telefax Number 021 78541898/9

Tax & Invoice Address:

BUT ConocoPhillips Indonesia Inc. Ltd

NPWP: 01.001.235.9-081.000

Gedung Ratu Prabu II 1st,6th-14th Fl.JL. TB Simatupang Kav 1B

12650 JAKARTA

INDONESIA

Our reference

134162

Delivery Terms: DDP Jakarta Warehouse Your Bid #: 0000134162

Payment Terms: Due 30 Days From Invoice Receipt Currency: USD

Salesperson: DEWI SUMINAR Your Reference: 134162-PZ

Purchase Order


4/27

product, service, technology or software obtained under this Purchase Order, Vendor

shall apply for and obtain the applicable licenses and make copies available to

ConocoPhillips Indonesia to enable ConocoPhillips Indonesia to comply with any

conditions of such licenses to which ConocoPhillips Indonesia is subject. Failure of

ConocoPhillips Indonesia to verify the need for, inspect or bring to the attention of

Vendor any defect in such licenses shall in no way relieve Vendor of its obligations

under this Purchase Order. Vendor will timely provide to ConocoPhillips Indonesia the

U.S. export compliance classification number (ECCN) of goods, services, technology or

software provided under this Purchase Order and similar classification number under any

other applicable export control regulations.

Vendor agrees that no goods or services provided under this Purchase Order willoriginate from, or be transported on any vessel owned by or operating under the flag

of, any country against which the United States or other applicable government has

imposed comprehensive economic sanctions. Vendor agrees to indemnify ConocoPhillips

Indonesia for any fines, penalties, claims, losses, damages, costs (including legal

costs), expenses, and liabilities that may arise as a result of Vendor's breach of this

provision.

If any good, product, service, or technology covered by this Purchase Order are subject

to any export or re-export license or authorization, Vendor shall obtain and furnish

copies of all licenses to [email protected] , with another copies

furnished to ConocoPhillips Indonesia along with the delivery of the said good,

product, service, or technology.

PACKING LIST: Three copies of packing list (s) shall be issued. The distribution shall

be as follows:

a) One (1) copy to be packed with the goods inside each package;

b) One (1) copy to be secured to the outside of the package, enclosed in a waterproof

envelope clearly marked "Packing List";

c) One (1) copy to be forwarded to the COPI Good Receiver .

MARKING INSTRUCTIONS: Clearly mark all packaging & packing lists as follows (failure to

do so may delay receipt/payment):

(-) Purchase order & Line Item No. (45 /30 XXXXXXXX / XX)

(-) COPI Material No. (when appropriate)

(-) Shipping Address of Receiving Point - ConocoPhillips Indonesia .Ltd

TECHNICAL DOCUMENT & CERTIFICATION): Goods are to be supplied in accordance to the

relevant technical document and certification where specified, against a line item,

certifiable goods MUST be supplied with a copy of the relevant documents. (Failure to

comply may delay receipt & payment), category as details below;

a) Lube Oil = Certification of Conformity, Certificate of Origin & MSDS


JL PUALAM NO1

40265 BANDUNG


quoted in all invoice and delivery documents. ___________________________________________________________________________________

PO number: 3000402653

Date: 06.03.2014

Page

2

Purchase Order


5/27

b) Fire Detector / Fire Protector / Fire extinguisher = Have an approved by an

acceptable International Testing Authority ( UL standard ) and the production date for

Fire Extinguisher should have not more than 6 months when received in COPI premises

area.

c) Refill compress gas cylinder (pure or liquid) also for Portable Fire Extinguisher) =

have Certificate of analysis or Certificate of purity, MSDS (for the contains, in

bilingual). For the refill cylinder should have valid Re Hydro test certificate.

d) Refill blending of chemical liquid in to tote tank, Porta tank or ISO tank = Have

certificate of analysis, MSDS (for contains). For the tank should have valid tank

certificate and if have pad eyes as lifting point, that pad eyes should have valid load

test certificate (SWL) or have valid NDT test report. Packaging in Drum is not accepted

for this.e) Certificate should be provided as per QA/QC matrix ID-G-BU-00000-00000-00062

Material Receiving Procedure.

f) Test result doc for non-specific inspection/testing = For any kind repair & return

items.

SHELF LIFE: For chemicals and HSE materials that have shelf life, vendor must provide

materials with minimum shelf life of 1 (one) year.

PACKAGING/FORWARDING TERMS: All Goods supplied on this Purchase Order shall comply with

the requirements of the Company#s Standard Specifications for Packing, Marking &

Shipping of equipment & materials. Also refer to packaging standard from manufacture

(-) Vendor or appointed currier is responsible to unload the delivered material/packageand place it in designated area as instructed by Good Receiver.

(-) Maximum storage height is below vehicle permanent wall

(-) Package can be unloaded from vehicle by manual handling (without forklift) if:

(*) Lowest point of package is 1.75 meter from lower deck

(*) Weight is less than 25 kg

(*) Dimension:

All sides (H-L-W) are less than 0.75 meter or

2 sides are (H-L, L-W, or H-W) is less 1 meter and the other side is less than 0.5

meter

(-) For material above 25 Kg, Transportation should be using truck that can be opened

from the back and side for handling unloading material safely.

(-) If the material did not meet above condition, vendor or appointed currier could ask

warehouse to help lifting the material with forklift. Warehouse will unload the package

if the package is equipped with pallet and the material can be accessed from vehicle

open space.

(-) Maximum 4 Drums (@200 Ltrs) in one pallet and secure properly by steel banded

(-) Maximum 40 Bags (@25 Kgs) in one pallet and secure properly by plastic wrapping

(-) Warehouse will reject any shipment that do not meet above condition

HSE PACKING NOTE: In keeping with the Company#s Health, Safety & Environmental Policy,


JL PUALAM NO1

40265 BANDUNG



PO number: 3000402653

Date: 06.03.2014

Page

3

Purchase Order


6/27

all packaging and packaging waste product should be kept to a safe minimum & where

practicable shall be reusable, recyclable, or suitable for environmentally safe

disposal to landfill or incinerator.

DANGEROUS GOODS: All shipments of hazardous substances &/or dangerous goods must be

accompanied by MSDS - Material Safety Data Sheet ( in English & Indonesian ) compliant

with ANSI standard Z400.1-1998, and be packaged and labeled (NFPA Chemical Hazardous

label) in compliance with ANSI/NFPA 704 and relevant Indonesian state & Territory

legislation.

WARRANTIES: Where applicable, warranty & guarantee documents are to be forwarded to the

Company Commercial Contact for this order. (Failure to comply may delay receipt &payment)

**********************************************************************************

If any good, product, service, or technology covered by this Purchase Order are

subject to any export or re-export license or authorization, Vendor shall obtain

and furnish copies of all licenses to [email protected].

COPI accepted :

item 1 : SUPERLOK P/N MF1V41-J16E8-A

- DBB MONOFLANGE- BODY: 316SS

- 1500#

- FLANGE SIZE: 1"

- BORE: 5MM

- RING JOINT FLANGE

- THREAD CONNECTION: 1/2" NPTF PLUGGED

- VENT CONNECTION: 1/4" NPTF

- PACKING: GRAPHITE

- FIRE SAFE STANDARD

- TRIM : STAINLESS STEEL 316SS

- C/W : - Certificate for the material.

- Hydro Leak Test Report & Dimensional Test

Report.

We require an order acknowledgment for the following items:

3000402653_________________________________________________________________________________

Item Material Description


JL PUALAM NO1

40265 BANDUNG



PO number: 3000402653

Date: 06.03.2014

Page

4

Purchase Order


7/27

Order qty. Unit Price per unit Net value_________________________________________________________________________________

00001 13584859 VALVE, DOUBLE BLOCK AND BLEED, MONOFLANGE, 316 STAINLESS STEEL BODY,

2.5 MM BORE, 316 STAINLESS STEEL TRIM, 427 DEG C MAX TEMPERATURE, ASTM A182 BODY, ASTM

A479 TRIM, 1 IN RTJ ANSI CLASS 900 INLET, 1/2 IN FNPT OUTLET

25 Each 1,850.00 46,250.00

PROJECT: WIP.013.NBRG.DFLL

Total net value excl. tax USD 46,250.00

==========================================================


JL PUALAM NO1

40265 BANDUNG



PO number: 3000402653

Date: 06.03.2014

Page

5

Purchase Order

xxxxxxxxxxxxx


8/27


9/27


10/27

BLOCK & BLEED VALVES

3

APPLICATION & INSTALLATION

SOLUTIONS

Conventional Installation

SUPERLOK BLOCK & BLEED Valve

SUPERLOK Monoflange

SUPERLOK instrumentation products provided the ultimate suitable solutions for a integral block & bleed valve,

which is consist of one piece forged body it provide many merits, featuring a choice of end connections, bodystyle and

• A welded flange, connected to a primary ANSI class isolating valve. The primary valve will be connected

to a secondary instrument valve. A pressure gauge or transmitter will then be installed downstream of the

instrument valve.

• A one-piece integral forging incorporating up 3 ball valve or mixture of ball and needle design.

• Improved safety : leak paths reduced by up to 60%

• Reduced costs : installation and component costs reduced by up to 70%

• Reduced weight : by up to 80%

• Reduced susceptibility to problems caused by vibration.

• More compact then SUPERLOK DBB valve, adding further space and weight saving possibilities.

• Improved safety : leak paths reduced by up to 60%, less susceptibility to vibration

• Reduced costs : installation and component costs saving up to 80%

• Reduced weight : up to 85%


11/27


4

SPECIFICATION

Ball Valve

Design codes

Features

• ANSI / ASME B 16.34 - Designed to meet the pressure and temperature requirements

•

ANSI / ASME B 16.5 - Flange dimensions• ANSI / ASME B 1.20.1 - National pipe threads

• API 607 / BS 6755 - Fire safe designed

• 316 Stainless steel as standard.

• Pressure rating up to 10,000 psig (690bar).

• Temperature rating -71°F to 482°F (-57°C to 250°C).

DESCRITION

BODY MATERIAL

STAINLESSSTEEL

CARBONSTEEL

DUPLEXSTAINLESS

STEEL

1 BODY A182 F316 A350 LF2 A182 F51

2 OULET CONNECTOR A182 F316 A350 LF2 A182 F51

3 BALL A479 TP316 S31803

4 BALL SEAL PTFE / R.PTFE / PEEK

5 SEAT CAPSULE A479 TP316 S318036 STEM A479 TP316 S31803

7 LOWER STEM SEAL PTFE

8 UPPER STEM SEAL GRAPHITE

9 PACKING GLAND A479 TP316 S31803

10 STOP PIN SS 316 S31803

11 HANDLE SS 316

12 STEM WASHER SS 316

13 STEM NUT A194 8M

TEMPERATURE (°F)

100

300

200

500

400

1000

200

600

400300 500 600

700

P R E S S U R E ( B A R G ) 8700

2900

1450

5800

4350

7250

10500

P R E S S U R E

( P S I G )

PEEK

R.PTFE

• One piece or two piece body design -minimize leakage paths.

• Ball seat choice of seat materials : PTFE (virgin or filled ) , PCTFE , PEEK.

• End connector threads are fully isolated from process.• Fully encapsulated ball seat.

• Superior finished ball for low operating torque.

• Floating ball design providing seat wear compensation.

• Anti static design as standard.

• Blowout proof stem design.

• Colour coded & function identified handle.

• Bore size : Full bore, Reducer bore , 10mm , 14mm , 20mm.

• Optional : handle locking available , NACE compliance.


12/27


5

Outside screw and yoke(OS&Y) needle valve

Features• Externally adjustable gland.

• PTFE or Graphite packing for bubble tight sealing.

• Self centering crimped needle tip for bubble tight shut off and repeatability.

• Back seat design provides secondary stem sealing and prevents stem blow out.

• Colour coded close contact dust cap and function label for easy indentification.

• Bonnet seal ensure a bubble tight between body and bonnet.

• Stem threads are completely isolated from the process.

• Yoke of investment casting is precision casted for strength and perfect stem alignment.

• Bolted bonnet for strength.




DESCRITION

BODY MATERIAL

STAINLESSSTEEL

CARBONSTEEL

DUPLEXSTAINLESS

STEEL

1 BODY A182 F316 A350 LF2 A182 F51

2 OS & Y BONNET A351 CF8M A352 LCC A182 F51

3 GLAND FLANGE A351 CF8M A352 LCC A182 F51

4 INSERT A479 TP316 S31803

5 PACKING GRAPHITE

6 BUSHING A479 TP316 S31803

7 VEE TIP SS630 + Hard Cr

8 STEM A479 TP316 S31803

9 FLANGE BOLT A193 B8M A320 L7M

A453 Gr.66010 FLANGE NUT A194 8M A194 Gr.7

11 BONNET BOLT A193 B8M A320 L7M

12 BONNET SEAL GRAPHITE13 DUST CAP NYLON

14 BAR HANDLE A276 TP316 S31803

8700

Temperature (°F)

0 200100 300 400 500 600

2900

1450

5800

4350

7250

PTFE

PCTFE

10500

700 800 900 1000

GRAPHITE

100

300

200

500

400

600

700

P R E S

S U R E

( B A R G )

P R E S

S U R E

( P S I G )


13/27


6

Globe style needle valve

Features• Rolled stem operating threads for low torque operation.

• Gland packing in PTFE or Graphite for bubble tight sealing.

• Colour coded close contact dust cap and function label for easy identification.

• Self centering crimped needle tip for bubble tight seat sealing.

• Close contact dust cap for operating thread protection.

• Back seat design provides secondary stem sealing and prevents stem blowout.

• Stem threads are completely isolated from the process.

• Packing bolt with easy access.

• Lock nut for vibration protection.

DESCRITION

BODY MATERIAL

STAINLESSSTEEL

CARBONSTEEL

DUPLEXSTAINLESS

STEEL

1 BODY SS 316 A350 LF2 A182 F51

2 BONNET SS 316 A350 LF2 A182 F51

3 PACKING GRAPHITE

4 PACKING GLAND A479 TP316 S31803

5 PACKING BOLT SS 316 A350 LF2 S31803

6 STEM A479 TP316 S31803

7 VEE TIP SS630 + Hard Cr

8 LOCK NUT SS 316 A350 LF2 S31803

9 BONNET SEAL GRAPHITE

10 DUST CAP NYLON

11 BAR HANDLE A276 TP316 S31803

5000 100 200 300 400

2900

80060 0 70 0 9 00 1 00 0

1450

4350

5800

7250

8700

10500

Temperature (°F)

P R E S S U R E

( B A R G )

P R E S S U R E

( P S I G )

R.PTFE

PCTFE

GRAPHITE

100

300

200

500

400

600

700





14/27


7

Block & Bleed valve

Features• ANSI B16.5 flanged inlet connections 1/2" to 3" sizes

Class 150 rated to class 2500 rated.• 1/2" -1" F.NPT Thread outlet to ANSI/ASME B1.20.1

(depending on bore size).

• 1/2" F.NPT Thread vent connection to ANSI/ASME B1.20.1

• Standard materials of Stainless steel

ASTM A182 F316/F316L, Carbon steel ASTM

A350 LF2/A105, Duplex ASTM A182 F51.

• Optional materials include Super Duplex, Monel,

Hastelloy, Inconel.

• Raised face and ring type joint flange styles.

• One-piece forged construction flange as standard.

• Fire safe designed (and tested) to meet

BS 6755 Part 2/API 607.

• DBB & SBB Products meet the relevant code

requirement of ASME VIII, ASMEB 16.34,B16.5, B31.3 and API 6D.

• Bubble tight shut off.

• locking and anti tamper devices for all valve

types available option.

• Positive lever stop.

• User preferred handles.

• Permanent affixed reference label.


15/27


8

DB1 SERIES

Dimensions

SIZE

(inch)

RATING

(lb)

DIMENSION (mm)

L (RF) A B T

1/2

(DN15)

150170

89 60.3 11.2

30096 66.7

14.2

600 179 20.6900/1500

186121 82.5 28.8

2500 134 88.9 36.6

3/4

DN(20)

150

175

99 69.8 12.7

300118 82.5

15.7

600 22.1

900/1500 179 130 88.9 31.8

2500 186 140 95.2 38.2

1

(DN25)

150170

108 79.4 14.2

300124 88.9

17.5

600 179 23.9

900/1500186

150 101.6 34.8

2500 159 108.0 41.5

1-1/2

(DN40)

150 170 127 98.4 17.5

300179 156 114.3

20.6

600 28.8

900/1500 186 178 124.0 38.2

2500 200 203 146.1 50.9

2

(DN50)

150179

152 120.6 19.1

300165 127.0

22.4

600 186 31.8

900/1500 200 216 165.1 44.5

2500 208 235 171.5 57.2

(10mm BORE)

*Dimensions are for reference only and are subject to change.


16/27


17/27


10

DB2 SERIES

Dimensions

SIZE

(inch)

RATING

(lb)

DIMENSION (mm)

L (RF) A B T

1/2

(DN15)

150

235

89 60.3 11.2

30096 66.7

14.2

600 20.6900/1500 254 121 82.5 28.8

2500 267 134 88.9 36.6

3/4DN(20)

150

235

99 69.8 12.7

300118 82.5

15.7

600 22.1

900/1500 254 130 88.9 31.8

2500 267 140 95.2 38.2

1

(DN25)

150235

108 79.4 14.2

300124 88.9

17.5

600 254 23.9

900/1500267

150 101.6 34.8

2500 159 108.0 41.5

1-1/2

(DN40)

150 235 127 98.4 17.5

300254 156 114.3

20.6

600 28.8

900/1500 267 178 124.0 38.2

2500 314 203 146.1 50.9

2

(DN50)

150254

152 120.6 19.1

300165 127.0

22.4

600 267 31.8

900/1500 314 216 165.1 44.5

2500 334 235 171.5 57.2

(10mm BORE)



18/27


11

Dimensions

SIZE

(inch)

RATING

(lb)

DIMENSION (mm)

L (RF) A B T

3/4

DN(20)

150

235

99 69.8 12.7

300118 82.5

15.7

600 22.1

900/1500 254 130 88.9 31.8

2500 267 140 95.2 38.2

1

(DN25)

150235

108 79.4 14.2

300124 88.9

17.5

600 254 23.9

900/1500 267 150 101.6 34.8

2500 273 159 108.0 41.5

1-1/2(DN40)

150 235 127 98.4 17.5

300254 156 114.3

20.6

600 28.8

900/1500 267 178 124.0 38.2

2500 334 203 146.1 50.9

2

(DN50)

150254

152 120.6 19.1

300165 127.0

22.4

600 267 31.8

900/1500334

216 165.1 44.5

2500 235 171.5 57.2

SIZE

(inch)

RATING

(lb)

DIMENSION (mm)

L (RF) A B T

1

(DN25)

150235

108 79.4 14.2

300124 88.9

17.5

600 254 23.9

900/1500 267 150 101.6 34.8

2500 273 159 108.0 41.5

1-1/2

(DN40)

150 235 127 98.4 17.5

300254 156 114.3

20.6

600 28.8

900/1500 268 178 124.0 38.2

2500 334 203 146.1 50.9

2

(DN50)

150254

152 120.6 19.1

300165 127.0

22.4

600 173 31.8

900/1500334

216 165.1 44.5

2500 235 171.5 57.2

(14mm BORE)

(20mm BORE)




19/27


12

Dimensions

SIZE

(inch)

BORE

(mm)

RATING

(lb)

DIMENSIONS (mm)

RF FLANGE RTJ FLANGEA B

L T L T

1-1/2

(DN40)25.4

150 280 17.5 290 22.3 127 98.4

300 285 20.6 295 25.4156 114.3

600 300 28.8 300 28.8

900/1500 370 38.2 370 38.2 178 124.0

2500 400 50.9 403 52.4 203 146.1

2

(DN50)38.1

150 365 19.1 375 23.9 152 120.6

300 375 22.4 388 28.7165 127.0

600 390 31.8 393 33.3

900/1500 415 44.5 418 46.0 216 165.1

2500 475 57.2 478 58.7 235 171.5

3(DN80)

50.8

150 400 23.9 413 28.7 191 152.4

300 410 28.4 423 34.7

210 168.1600 430 38.2 433 39.7

900/1500 440 54.2 443 55.7 241 / 267 190.5 / 203.2

2500 500 72.9 506 76.1 305 228.6

SIZE

(inch)

BORE

(mm)

RATING

(lb)

DIMENSIONS (mm)

RF FLANGE RTJ FLANGEA B

L T L T

1

(DN25)25.4

150 270 14.2 280 19.0 108 79.4

300 280 17.5 290 22.3124 88.9

600 290 23.9 290 23.9

900/1500 365 34.8 365 34.8 150 101.62500 380 41.5 380 41.5 159 108.0

1-1/2

(DN40)38.1

150 360 17.5 370 22.3 127 98.4

300 370 20.6 380 25.4156 114.3

600 385 28.8 385 28.8

900/1500 400 38.2 400 38.2 178 124.0

2500 460 50.9 463 52.4 203 146.1

2

(DN50)50.8

150 390 19.1 400 23.9 152 120.6

300 400 22.4 413 28.7165 127.0

600 415 31.8 418 33.3

900/1500 480 44.5 483 46.0 216 165.1

(REDUCER BORE)

(FULL BORE)




20/27


13

The probe length must be specified from the raised face to the end of the probe in mm , to the nearest mm.

Probes are supplied to suit the insertion length required by the pipeline and thus must be specified by the cus-

tomer

SAMPLING VALVE

CHEMICAL INJECTION VALVE

Sampling probe

Injection quill

Non return check valve

This manifold range is designed to replace conventional multiple-valve installations where sampling

of the process stream is required. This design has been developed to remove a sample directly from

the process stream at full system pressure.

This manifold range is designed to replace conventional multiple-valve installations where injection

into the process stream is required. This design has been developed to inject directly into the processstream at full system pressure.

The probe length must be specified from the raised face to the end of the probe in mm .

Probes length shall be decided in consideration of injection insert length in the pipeline and customer's request.

INSTRUMENT

VENT

PROCESS

L

FLOW

PROCESS

VENT

OUTLET

I

L

FLOW

CHECK VALVE

This poppet type spring return valve has a viton soft seal(SUPERLOK standard)


21/27


14

FUGITIVE EMISSIONISO 15848 parts 1&2 (defining a classification system and qualification procedures,

and production acceptance test of industrial valves, respectively)

specify new ultra low standards for emissions. This standard is becoming the requirement for

oil and gas and petrochemical organizations worldwide. The standard was originally created forprocess valves and control valves but is now being applied to Instrument valves which include primary

isolation valves, especially on environmentally sensitive projects.

Meeting these low levels is a challenge, which BMT Instrument has solved with the new ball and needle

valve designs used in these DBB valves and mono flanges.

These designs meet the highest class ‘A’ level over the temperature range -29°C to +180°C,

alongside the standard instrumentation manifold pressure ranges.

Production testing and certification is available upon request. Please specify sample quantity required for

production testing with your order.

The ISO 15848 standard effectively sets a requirement for zero emissions for processes

involving volatile air pollutants and hazardous fluids.This design has been developed to minimise

fugitive emissions.

Valve Specification■ Tightness class A >1 x 10-6 mg.s-1.m-1.

■Maximum cold working pressure rating 6,000 psig.

■ Temperature rating -50°C to 180°C (-58°F to 356°F)

■ISO15848-1 prototype tested using global helium vacuum method.


22/27


15

Example-1) : DB211-R8C-B111-LF2

Example-2) : SB111-R8A8-D111-AB

Ordering Information

1

1

32

5

4

4

5 6

3 6 52 7

7

8

8

1. Valves

SB SINGLE BLOCK & BLEED VALVE

DB DOUBLE BLOCK & BLEED VALVE

2. Valve type

1 FLANGE X FNPT 2 FLANGE X FLANGE

3 MNPT X FNPT

4 FNPT X FNPT

5 MSW X FNPT

6 SW X FNPT

3. Valve Series

IDENTIFY 1st

ISOLATE

2st

ISOLATE VENT

SINGLEBLOCK

TYPE

1

BALL

-

NEEDLE

2 OS & Y

3 BALL4 NEEDLE

NEEDLE5

OS & Y6 OS & Y

DOUBLE

BLOCK

TYPE

1

BALL BALL

NEEDLE

2 OS & Y

3 BALL

4 NEEDLE NEEDLE NEEDLE

5OS & Y OS & Y

NEEDLE

6 OS & Y

7 TR BALL TR BALL

NEEDLE

8 OS & Y

*A FUGITIVE EMISSION CL-A

*B FUGITIVE EMISSION CL-B

4. Bore size (mm)

(BLANK) - 10mm(STANDARD)

1 - 14mm

2 - 20mm

3 - 25mm

4 - 32mm

5 - 38mm

6 - 50mm

6. Pressure class

A - 150 G - 2000psi

B - 300 H - 3000psi

C - 600 I - 5000psi

D - 900 J - 10000psi

E - 1500

F - 2500

S - 800

8. Body material

(BLANK) - SS316

15 - A105

LF2 - A350 LF2

F51 - A182 F51

M40 - MONEL ALLOY 400

5. Connection size

R - RAISED FACE FLANGE

J - RING JOINT FLANGE

F - FLAT FACE FLANGE

AF - AP16B FLANGE

SA - SAE J518 FLANGE

IS - IS06164 FLANGE

JF - JIS FLANGE

4 - 1/4 ”

6 - 3/8 ”

8 - 1/2”

12 - 3/4”

16 - 1”

24 - 1-1/2”

32 - 2”

48 3”

＋

7. Option + Trim + Seat + O-Ring

Option TRIM SEAT O-RING

TYPE IDENTIFY TYPE IDENTIFY TYPE IDENTIFY TYPE IDENTIFY

STANDARDFIRE SAFETY BLANK(A) Body = Trim BLANK (0) PTFE BLANK (0) NBR BLANK (0)

SAMPLING PROBE B SS316 1 R.PTFE+GLASS 1 VITON 1

CHEMICAL INJECTION C CF8M 2 R.PTFE+CARBON 2 EPDM 2

LOCKING DEVICE D SS316L 3 PEEK 3 KALREZ 3

ANTI TAMPER KEY E SS304 4 PCTFE 4 CR 4

- - A105 + ENP 5 POM 5 SILICON 5

- - A105 + CR 6 DEVLON-V 6 AED 6

- - MONEL 400 7 DELIN 7 HNBR 7

- - 316 + Stellite 8 METAL 8

* To select the Fugitive Emission type, please add suffix of "A" or "B"

to the part number of Valve Series.


23/27


16

Monofange valve

Features• ANSI B16.5 flanged inlet connections 1/2" to 2" sizes

Class 150 rated to class 2500 rated.• 1/2"-14 NPT(female) standard outlet.

• 1/4"-18 NPT(female) standard vent.

• Standard materials of Stainless steel

ASTM A182 F316/F316L, Carbon steel ASTM

A350 LF2/A105, Duplex ASTM A182 F51.

• Optional materials include Super Duplex, Monel,

Hastelloy, Inconel.

• Combined needle and OS & Y valves available.

• Raised face and ring type joint flange styles.

• One-piece forged construction flange as standard.

• Fire safe designed to meet BS 6755 Part 2 / API 607.

(As option)

• Pressure boundary designs calculated to ASME

VIII Div 1 and verified by testing.

• Heat code traceable material to EN 10204.3.1.

•

Bubble tight shut off valve seats 17-4 PH tipsstandard.

• Colour coded functional valves.

• Locking and anti tamper devices for all valve

types available. (as option)

• Permanent marked body with full order and

specification details.


24/27


17

I

1ST ISOLATE 1ST ISOLATE

PROCESS INSTRUMENT

L

Ø A

Ø B

V E NT


PROCESS

VENT

INSTRUMENT

Ø A

L

Ø B

MF1V1 Series

MF1V2 Series

MF1V3 Series

I

1ST ISOLATE

PROCESS INSTRUMENT

2 N D

I S O L A T E

1ST ISOLATE

Ø A

L

Ø B


25/27


18

MF1V4 SERIES

2 N D

I S O L A T E

V E NT


PROCESS

VENT

INSTRUMENT

L

Ø A

Ø B

Dimensions

SIZE

(inch)

RATING

(lb)

DIMENSION (mm)

L(RF) L(RTJ) A B

1/2

(DN15)

15064

- 89 60.3

300

64

96 66.7600

68900/1500 121 82.52500 134 88.9

3/4

DN(20)

15064

- 99 69.8

300

68118 82.5

60068

900/1500 130 88.9

2500 73 73 140 95.2

1

(DN25)

15064

68

108 79.4

300124 88.9

600 68

900/150073 73

150 101.6

2500 159 108.0

1-1/2

(DN40)

150 64 68 127 98.4300 69 69

156 114.3600

73 73900/1500 178 123.8

2500 82 84 203 146.1

2

(DN50)

15069

73 152 120.6

30075 165 127.0

600 73

900/1500 82 84 216 165.1



26/27


19

Example-1) : MF1V41-J8C8-E-AB

Example-2) : MF1V11-R8C8-LF2

Ordering Information

1

1

2

6

3 5

3

4 3

4 32

6

1. Valves

MF MONO FLANGE

2. Valve type

IDENTIFY 1stISOLATE

2stISOLATE

VENT

1 FLANGE X FNPT

2 FLANGE X FLANGE

V11 NEEDLE

- -2 OS & Y

V21 NEEDLE

- NEEDLE2 OS & Y

V31 NEEDLE

NEEDLE -2 OS & Y

V4

1 NEEDLE NEEDLE

NEEDLE2OS & Y

NEEDLE

3 OS & Y

4. Pressure class A - 150

B - 300

C - 600

D - 900

E - 1500

F - 2500

5. Option

A STANDARD FIRE SAFETY

D LOCKING DEVICE

E ANTI TAMPER KEY

F BOLTED BONNET

6. Body material

(BLANK) - SS316

15 - A105

LF2 - A350 LF2

F51 - A182 F51

M40 - MONEL ALLOY 400

3. Connection size R - RAISED FACE FLANGE (BLANK)

J - RING JOINT FLANGE

F - FLAT FACE FLANGE

AF - AP16B FLANGE

SA - SAE J518 FLANGE

IS - IS06164 FLANGE

JF - JIS FLANGE

8 - 1/2”

12 - 3/4”

16 - 1”

24 - 1-1/2”

32 - 2”

48 3”

＋


27/27

Documents

ID-N-SM-JJ0-TQD-00-00XX_IFA - Monoflange [Superlok]-1.pdf