ID 1 VP2 Wireless Console ISS - DAVIS INSTRUMENTS METEOROLOJ°

www.davisnet.comInstallation Diagram #1 • Rev. A • 04/18/0893004.201

INSTALLATION DIAGRAM

Wireless Vantage Pro2™ System (Console with Integrated Sensor Suite)

ConsolePRODUCT #6312

Integrated Sensor SuitePRODUCT #6322

This diagram shows an Integrated Sensor Suite wirelessly connected to a Vantage Pro2 console with the console located within a home and the Integrated Sensor Suite mounted outside. The transmission distance between an Integrated Sensor Suite and console is up to 1000’ (300 m) line of sight, or up to 600’ (180 m) through walls and other obstructions.

www.davisnet.com Installation Diagram #2 • Rev. A • 04/18/08


Wireless Vantage Pro2™ System (Envoy with Integrated Sensor Suite)

Weather EnvoyPRODUCT #6316

Any Vantage Pro2 Station

RepeaterPRODUCT #Temperature/

Humidity StationPRODUCT #

ORTemperatureStationPRODUCT #

Leaf & SoilMoisture StationPRODUCT #

ORAnemometerTransmitter KitPRODUCT #

Vantage Pro2Console/ReceiverPRODUCT #6312

This diagram shows an Integrated Sensor Suite wirelessly connected to a Weather Envoy™, which is connected to a computer. The transmission distance between an Integrated Sensor Suite and an Envoy isup to 1000’ line of sight, or up to 600’ through walls and other obstructions. The cable distance between an Envoy and a computer is 8’ using a USB connection.


93004.202



Transmitting to a Vantage Pro2™ Console and Weather Envoy™ simultaneously


Vantage Pro2 ConsolePRODUCT #6312








This diagram shows an Integrated Sensor Suite wirelessly connected to both a Vantage Pro2 Console and Weather Envoy, which is connected to a computer. The transmission distance between an Integrated Sensor Suite and Envoy or Console is up to 1000’ (300 m) line of sight, or up to 600’ (180 m) through walls and other obstructions. The cable distance between an Envoy and a computer is 8’ using a USB connection. Multiple receivers (both Envoy and Vantage Pro2 consoles) can listen to the same station or set of stations.


93004.203

www.davisnet.comInstallation Diagram #4 • Rev. A • 04/18/08


Vantage Pro2™ Console Retransmitting data to a Weather Envoy™










This diagram shows an Integrated Sensor Suite (ISS) wirelessly connected to both a Vantage Pro2 Console and Weather Envoy, which is connected to a computer. The Vantage Pro2 is retransmitting the ISS data to the Weather Envoy. The transmission distance between an Integrated Sensor Suite and Envoy or Console is up to 1000’ (300 m) line of sight, or up to 600’ (180 m) through walls and other obstructions. The cable distance between an Envoy and a computer is 8’ using a USB connection. Multiple recievers (both Envoy and Vantage Pro2 consoles) can listen to the same station or set of stations.


93004.204



Weather Envoy™ Retransmitting Data to a Vantage Pro2™ Console










This diagram shows an Integrated Sensor Suite (ISS) wirelessly connected to both a Vantage Pro2 Console and Weather Envoy, which is connected to a computer. The Weather Envoy is retransmitting the ISS data to the VantagePro2. The transmission distance between an Integrated Sensor Suite and Envoy or Console is up to 1000’ (300 m) line of sight or up to 600’ (180 m) through walls and other obstructions. The cable distance between an Envoy and a computer is 8’ using a USB connection. Multiple receivers (both Envoy and Vantage Pro2 consoles) can listen to the same station or set of stations.


93004.205

www.davisnet.comInstallation Diagram # 6 • Rev. A • 04/18/0893004.206


Solar-Powered Field Station Connected to Multiple Stations

This diagram shows an Integrated Sensor Suite and a Leaf and Soil Moisture/Temperature station wirelessly connected to a field station (a console or Weather Envoy™ housed in a weatherproof Complete System Shelter) that is powered by a Solar Power Kit.

Stainless SteelTemperature ProbePRODUCT #6470

Wireless Console/Receiver inComplete System ShelterPRODUCT #6312 & 7724

Soil Moisture SensorPRODUCT #6440

Solar Power KitPRODUCT #6610

Leaf & Soil Moisture/Temperature StationPRODUCT #6345




Weather Envoy with a Wireless Field Station

Wireless Weather EnvoyPRODUCT #6316

Multi-Purpose ShelterPRODUCT #7728



This diagram shows a wireless field station with solar power and soil moisture sensor. The field station shown iscomprised of a Wireless Weather Envoy receiving wireless data from from an Integrated Sensor Suite and a Leaf and Soil Moisture/Temperature Station.



This diagram shows an Integrated Sensor Suite and an Anemometer Transmitter Kit wirelessly connected to a Vantage Pro2™ Console.

Anemometer Transmitter Kit

Anemometer Transmitter KitPRODUCT #6332

Anemometer



PRODUCT #6410



This diagram demonstrates how each Vantage Pro2 Console can receive data from up to eight different transmitting stations.

Vantage Pro2™ Console Receiving Data from up to 8 Di�erent Transmitting Stations

MAXIMUM number of each station type. Total number of stations cannot exceed 8.

Transmitting Station Shown on Console

Logged by WeatherLink

Integrated Sensor Suite 1 1

Anemometer Transmitter Kit 1 1

Leaf & Soil Moisture/Temp 2* 2*

Temperature Station 8 3**

Temperature/Humidity 8 2**

* One fully-populated station or two partially-populated stations.** WeatherLink will log a maximum of 3 Temperature Stations, or 1 Temperature Station

and 2 Temperature/Humidity Stations.

Anemometer Transmitter KitPRODUCT #6332

Temperature/HumidityStationPRODUCT #6382

Anemometer



Leaf Wetness SensorPRODUCT #6420

Stainless SteelTemperature ProbePRODUCT #6470

Soil Moisture SensorPRODUCT #6440


PRODUCT #6410


USB-mini B

USB-A

USB Port

WeatherLink Data LoggerPRODUCT #6510USB

AC Power AdapterPRODUCT #6625

Data Logger Cable


Computer


Connecting a Wireless Weather Envoy™ to a Computer via WeatherLink®








This diagram shows a Wireless Weather Envoy and a WeatherLink Data Logger connected to a computer via a USB Data Logger cable.

93004.214


USB-mini B

USB-A

USB PortBattery Cover


Data LoggerPRODUCT #6510USB

Data Logger Cable

Computer


Connecting a Wireless Vantage Pro2™ Console to a Computer via WeatherLink®








This diagram shows a Wireless Vantage Pro2 Console and a WeatherLink Data Logger connected to a computervia a USB Data Logger cable.

93004.215


Vantage Pro2 ISSPRODUCT #6322

Wireless RepeaterPRODUCT #7626 or #7627

Temperature/Humidity StationPRODUCT # 6382

ORTemperatureStationPRODUCT # 6372

Leaf & SoilMoisture StationPRODUCT # 6345

ORAnemometerTransmitter KitPRODUCT # 6332



Wireless Repeater Network with Multiple Stations

Any Vantage2 Station







This diagram shows a Wireless Repeater network, comprised of an Integrated Sensor Suite (ISS), a Temperature/Humidity Station, and a Leaf and Soil Moisture Station, all transmitting to a Wireless Repeater. The WirelessRepeater is relaying the data from each of the three stations to a Vantage Pro2™ Console/Receiver.

93004.217



RepeaterPRODUCT #7626 or 7627












This diagram shows a Wireless Repeater network, comprised of an Integrated Sensor Suite (ISS) transmitting to aWireless Repeater. The initial Wireless Repeater is relaying the ISS data to two (2) additional Wireless Repeaters, and the data is then relayed to a wireless Vantage Pro2™ Console/Receiver. An installation with these instruments can transmit the ISS data up to 4000’ (1200 m) outdoors, line of sight. For this type of installation, typical range throughwalls under most conditions is 600’ to 1200’ (180 m to 360 m).

Wireless Repeater Daisy Chain (One Station, Multiple Repeaters)

93004.218


Any Vantage Pro2ISS Station PRODUCT # 6322

Wireless RepeatersPRODUCT # 7626 or 7627

Temperature/Humidity StationPRODUCT # 6382

Temperature StationPRODUCT # 6372 and 6470

AnemometerTransmitter KitPRODUCT # 6332

Leaf & SoilMoisture StationPRODUCT # 6345

Vantage Pro2Console/ReceiverPRODUCT # 6312









This diagram demonstrates how each Vantage Pro2™ Console can receive data from up to eight (8) differenttransmitting stations. In this arrangement, an Integrated Sensor Suite (ISS) is transmitting data to a Vantage Pro2 Console via a daisey chain of three (3) Wireless Repeaters. At the same time, the Wireless Repeaters are receiving andrelaying data to the console/receiver from a collection of wireless instruments including a Leaf and Soil Moisture Station, an Anemometer Transmitter Kit, a Temperature/Humidity Station, and a standalone Temperature Stationwith a Stainless Steel Temperature Probe.

Wireless Repeater Combination Network (Multiple Stations, Multiple Repeaters)

93004.219


Any Vantage Pro2 Station RepeaterPRODUCT #7626

or #7627

RepeaterPRODUCT #7626

or #7627

First in ChainRepeaterPRODUCT #7626

or #7627

Temperature/Humidity StationPRODUCT #6382


OR

Weather Envoy 2PRODUCT #6316









This diagram shows a Wireless Repeater network, comprised two separate sets of repeaters. On one section of the network an Integrated Sensor Suite (ISS) is transmitting data to a Wireless Repeater, which relays the ISS data toa Vantage Pro2™ or Weather Envoy™ 2 Console. On another section of the network a Temperature/Humidity Station can simultaneously transmit data to an initial Wireless Repeater, which relays the data to a second repeater, which in turn relays the data to a Vantage Pro2 or Weather Envoy 2 Console.

Wireless Repeater First In Chain Network

93004.220

Documents

ID 1 VP2 Wireless Console ISS - DAVIS INSTRUMENTS METEOROLOJ°