www.icotera.com Icotera A/S reserves the right to change specifications without further notice.

IGW3000E Residential Gateway

High performance solutionIntuitive designExtensive IPv6 supportSlide-on designPhenomenal aesthetic designOptional external battery backupLow power consumptionDeveloped and Manufactured in Europe

QOS

WIFI INTERFACE (OPTIONAL)

WAN INTERFACE

LAN INTERFACE

LAYER 2

1 x RJ45 connectors 100/1000 Base T(X) Full-duplex transmissionAuto-negotiation for speed and duplexAuto MDI/MDXMTU size: <= 2048 bytes

VFR-liteGigabit wirespeed forwardingIGMP proxy with fast-leave and monitoringP2P filters/rate-limitingStatefull Packet InspectionIPv4 SNAT, DNAT, DMZ DNS proxy DHCP client and serverIPv6 Prefix delegation RFC3769 6RD DHCP client and serverPPPoE (optional)IP L2-L4 filters (256 rules per filter)Connection tracking with monitoringUPnP

8 QueuesLayer 3 QoS features Packet classification Marking Queuing Scheduling Rate Limiting802.1p priority802.1p remappingToS classificationDiffserv classification

4 or 8 x RJ45 connectors 10/100/1000 Base T(X)Auto-negotiation for speed and duplexAuto MDI/MDXJumbo packets802.1x

Multiple bridge instancesGigabit wirespeed forwardingIGMP snoopingWire-speed bridgingVLAN supportWiFi supportTransparent IPv6 forwarding802.1p

FEATURES LAYER 3

IGW3000E

The Icotera IGW3000E Residential Gateway integrates Ethernet-based data transmission with Layer 2-4 functionality and VoIP, 802.11bgn WiFi and USB.

IGW3000E features a powerful dual core architecture, where all realtime tasks are handled by a dedicated core, leaving one core available for other immediate tasks. This means that the system is still responsive, even while doing VoIP, Gigabit routing of IPv4/IPv6 with NAT (IPv4) or bridging at wirespeed. Full IGMP proxy functionality for a router instance and IGMP snooping for bridges is provided to minimize the multicast traffic load.

A VRF-lite functionality is provided where up to 4 inde-pendent router instances can be created, all featuring support for multicast, filtering up to level 7, NATv4 functionality and several IPv6 mechanisms.

To provide simple Layer 2 functionality, a bridge system is implemented and up to 4 separate bridging instances can be created. A maximum of 24 interfaces (LAN, WAN and WiFi) can be added and configured as members on different routers or bridges.

IGW3000E can be controlled by a number of management protocols or our fail-proof zero-touch auto provisioning mechanism.

IEEE 802.11b/g/nIEEE 802.11a (optional)Multiple SSIDsEncryption WEP64 WEP128 WPA WPA2MAC filtering2T2R MiMoWPS802.1xInternal antennas (external optional)

www.icotera.com Icotera A/S reserves the right to change specifications without further notice.

IGW3000E Residential Gateway

MANAGEMENT & MONITORING

STATUS LEDs

CASING

VOIP (OPTIONAL)

GENERAL SPECIFICATIONS

USB (OPTIONAL)

Shared or separate IP interface for managementIP filters for all local servicesSSHv2 with key authenticationTelnet with authenticationEnd-user orientated web interface (configurable) WiFi LAN network Port forwarding Status and monitoringTR-069 supporting TR-104 (VoIP) TR-98 (Network)CLI with auto-completionSNMP v1/v2 (IF-MIB, ICOTERA private MIB) Extensive debug possibilitiesPacket dumpingAll settings are stored locally in flashZero-touch configuration with DHCP/TFTP or TR-069Automatic firmware update (polling)Failsafe firmware upgrading

Configurable by operator and/or end-userAuto off after timeout periode Power/Info WAN status (link/traffic) VoIP port 1 VoIP port 2 LAN status (link/traffic, duplex)

Wall mountableStand alonePlastic casing in ABS/PC

2 RJ11 connectors2 separate POTS lines SIP (RFC3261)5 REN supportDTMF signaling SIP INFO Inband RFC 2833Adaptive jitter bufferDNS SRVCaller ID support (DTMF/FSK/DTMF DK)CLIRAdvanced dialplanB-Number manipulationClass 5 services Forward all calls Forward on busy Forward on no answer Call waiting Codecs G.711A a-law G.711U μ-law G.729Modem/Fax supportT.38 fax (optional)Silence suppressionLEC (Line Echo Cancellation)G.165 Echo cancellation CNG (Comfort Noise Generation)

DC12V input ±10%Power consumption: 12watt (incl. 4LAN, 2VoIP, WiFi) Operating temperature: 0 – 45cStorage temperature: -20 – 85cHumidity: 5% - 95% (non-condensing)Optional external battery PSUWeight 800gSize: 190 x 110 x 48 mm (W x H x D)

Icotera partner:

2 x USB portPrepared for Zigbee Z-wave CATiq Storage