Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
We are still receiving new paper titles and two-page short papers, students or junior faculty
members have priority, but please hurry, do this well before July 1, 2011 deadline, urgent
ICCE-19
July 24-30, 2011 in Shanghai, China
www.icce-nano.org
Preliminary list of
two-page short papers received
Dated June 19, 2011
If you are a participant but cannot find your paper, it is because
(item 1) you submit only paper title, one paragraph abstract is not enough, we need detailed two-
page short paper, each page two coluums format
(item 2) if there are clerical errors, please correct them. If you submitted two page short paper,
but cannot find in this list, please immediately correct this, and inform [email protected]
(item 3) if you have not submitted two-page short papers, please do so immediately or soon, so
that upon peer reviewed, we can then include your paper in this list)
ICCE-19 KEYNOTES
Clinical Nursing Program With Imbedded Knowledge In Biomaterials, Implant
Technologies And Medical Sciences... Linda T. ADAMS (NCAT, Greensboro, NC)
Status In The Growth Of Anisotropic Oxide Thin Films And Heterostructures For Future
Electronics Kazuhiro ENDO (Kanazawa I.T. Japan), Petre Badica (NIMP, Bucharest,
Romania), Hiroshi Kezuka (Tokyo U.T., Japan), Shunichi Arisawa (NIMS, Tsukuba,
Japan), Tamio Endo (Mie U. Japan)
Carbon Nanopaper Enabled Structural and Multifunctional Nanocomposites
Jihua GOU, Jinfeng Zhuge, Fei Liang (U. Cen. Florida, Orlando)
Directions For Hypersonic Thermal Protection Systems And Materials Severed At Ultra-
High-Temperature Environment Jiecai HAN, Changqing Hong, Xinghong Zhang,
Ping Hu (Harbin I.T., China)
Natural Fibers for Applications
Alan LAU (U. Southern Queensland, Brisbane, Australia)
Novel Structural And Magnetic Effects In Passivated Antiferromagnetic Transition Metal
Monoxides: Inverted Antiferromagnetic (AFM)/Ferrimagnetic (FIM), Core/Shell
Nanoparticles Josep NOGUES, A. Lopez-Ortega, M. Estrader (UAB, Bellaterra,
Spain), D. Tobia, E. Winkler (Bariloche, Argentina), S. Estrade (U. Barcelona, Spain),
I. Golosovsky (St. Petersburg, Russia), J. Sort (Bellaterra, Spain), G. Salazar-Alvarez
(Stockholm, Sweden), F. Peiro (U. Barcelona), S. Suriñach (U. Auto Barcelona),
R.D. Zysler (Bariloche, Argentina), M.D. Baro (U. Auto Barcelona)
Advancement of Basalt Fibers towards Structural Applications
Zhishen WU (Southeast U., Nanjing, China and Ibaraki, Japan)
BIO COMPOSITES
Human Bone As Composite Material
M.E. Aksoy (Min. of Health, Istanbul, Turkey), I. Kutbay, M. Usta (Gebze I.T., Turkey),
C. Bindal (Sakarya U.), A. Gul (Istanbul T.U.), A. Hikmet UCISIK (Bogazici U., Bebek-
Istanbul, Turkey)
Diagrams For Quasi-Brittle Fracture Of Bimaterial
V.M. KORNEV, V.D. Kurguzov, N.S. Astapov (Novosibirsk, Russia)
Fabrication of Poly(propylene carbonate)/Gelatin Composite via Layer-by-Layer Assembly
for Cytocompatibility Assessment Xia ZHONG, Fariba Dehghani (U. Sydney,
Australia)
Electrospun Nanofibers For Artificial Scaffolds And Reinforcement Of Rubbers
Ulrike Wangenheim, Ulrich Giese, Robert H. SCHUSTER (DIK, Hannover, Germany)
Simulation For Exogenous Microbial Depolymerization Of Polyethylene Glycol
Hongmei BAO, Masaji Watanabe (Okayama U., Japan), Fusako Kawai
(Kyoto I.T., Japan)
Modeling And Simulation For Microbial Depolymerization Of Polyethylene Glycol
Masaji WATANABE (Okayama U., Japan), Fusako Kawai (Kyoto I.T., Japan)
Poloxamer-Modified Montmorillonite Clay as Potential Antibacterial Agent Against E. coli
Pao-Chi LIAO, Yi-Han Liao, Yung-Tang Nien (Nat. Cheng Kung U., Tainan)
Replacement Of Local Osteochondral Defects As Hybrid Bio-Composite
Jaroslav LISAL, Miroslav Petrtyl (Czech T.U>, Prague), Zdenek Bastl (ASCR),
Ladislav Senolt (Charles U., Prague), Zdenek Krulis (ASCR), Pavel Cerny
(Ortotika, Ltd. Czech Rep.)
Nano Technology Modification Of Natural Fibres For Bio-Composites
Dasong DAI, Mizi Fan (Brunel U., UK)
Shape Optimization Of Fiber In Biomaterials
Petr P. PROCHAZKA, Martin J. Valek (Czech T.U., Prague)
Use Of Acetylated Starches In Biodegradable Plastics And Composites With
Montmorillonite Petr DUCHEK, Jan Schubert (U. West Bohemia, Czech Rep.)
Nanoscale Reinforcement Of Light Weight Bio-Based Foams Using Rice Straw Nanofibers
Chularat KRONGTAEW, Saniwan Srithongkham, Lalita Vivitchanont.
Siritorn Nakchamnan (Mahidol U., Nakorn Pathom, Thailand)
Schizophyllum commune As Nano-Factory For Biosynthesis Of Silver Nanoparticles
Mat Don MASHITAH, Yen San, Chan (U. Sains Malaysia, Pulau Pinang)
Preparation Of Injectable Artificial Bone Fabricated From Hydoxyapatite / Collagen
Nanocomposite Akinori Kochi (Okayama U., Japan), Masanori KIKUCHI
(NIMS, Tsukuba, Japan), Yuki Shirosaki, Satoshi Hayakawa, Akiyoshi Osaka
(Okayama U., Japan)
Ultrastructural Analysis Of Synthetic Hydroxyapatite With Preferred Orientation To
C-Plane Using High-Resolution Transmission Electron Microscopy
Zhi ZHUANG, Mamoru Aizawa (Meiji U., Japan)
Silver Nanoparticles Based Materials For Antimicrobial Treatment Of Medical Leathers
And Sheepskins Carmen GAIDAU (Leather & Footwear R.I., Bucharest, Romania),
Aurora Petica (INCDIE, Bucharest, Romania), Wuyong Chen (Sichuan U., Chengdu,
China, Lucretia Miu (Bucharest, Romania)
Fabrication And Micromechanical Testing Of Polymer Micro-Grippers With Compliant
Force Sensing Ruth E. MACKAY (U. Dundee, UK), H.R. Le (U. Plymouth,UK),
L. Zhang (U. Dundee)
Promising Materials Made Of Bio-Hybrid Polyurethane
Ernie Suzana ALI (U. Sains Islam Malaysia), Sahrim Hj Ahmad, Syazana Ahmad Zubir
(Int. U. Malaysia, Selangor)
Sensitive Label-Free Impedimetric Immunosensor Based On Polypyrrole For
Human Chorionic Gonadotropin Hormone Detection
T.N. Lien TRUONG (Hanoi U.T., Vietnam), Miyuki Chikae, Yoshiaki Ukita,
Yuzuru Takamura (JAIST, Ishikawa, Japan) chair
Engineering Of Concentrated Emulsions As A Drug Carrier System For Pharmaceutical
Application Lihong TONG, Mont Kumpugdee-Vollrath, Jens-Peter Krause
(U. Applied Sciences, Berlin, Germany), Pornsak Sriamornsak (Silpakorn U.,
Nakhon Pathon, Thailand)
Surface Roughness Evaluation Of Experimental Dental Nanocomposite After Bleaching
Dasmawati MOHAMAD, Zuryati Ab Ghani, Ooi Qian Qian, Zaid Hameed,
Mohammed Ali (U. Sains Malaysia, Kelantan)
Beta Casein Nanovehicles For Targeted Oral Drug Delivery – Towards Treatment Of
Gastric Cancer Alina SHAPIRA, Irit Davidson, Noa Oron, Yehuda Assaraf,
Yoav D. Livney (Technion, Israel I.T.) Tues-Wed
Intravenous Fat Nanoemulsion: a Novel Antidote for Local Anesthetic-Induced Systemic
Toxicity in Humans Guy Weinberg, Israel RUBINSTEIN (U. Illinois-Chicago)
Selective Encapsulation of Dye Molecules in Dendrimer/Polymer Multilayer Microcapsules
by DNA Hybridization Chuan-Liang FENG, Qinglei Liu, Wang Zhang, Jiajun Gu,
Shenmin Zhu, Di Zhang (Shanghai Jiao Tong U., China)
Kenaf Composition Boards With Termite Resistance
Poo CHOW (U. Illinois, Urbana), F.S. Nakayama, T.A. Coffelt, S.H. Vinyard
(USDA-ARS, Maricopa, AZ)
Synthesis And Characterization Of Mesoporous CaO-B2O3-SIO2 Bioactive Glass
Lay-Gaik TEOH, Yu-Ren Wu, Pei-Hsing Huang, Yi Lin Huang
(Nat. Pingtung U. Sci. Tech., Neipu)
Synthesis, Characterization And In Vitro Bioactivity Of Sol-Gel Derived Mesoporous
Bioactive Glass Yu-Ren WU, Lay Gaik Teoh, Pei-Hsing Huang, Wei Haw Wu
(Nat. Pingtung U. Sci. Tech., Neipu)
Subtle Issues In Precision Analysis Involving Orthotropic Heat Transfer
Jay I. FRANKEL (U. Tennessee, Knoxville, TN)
Applications of Cd-Te Quantum Dot Nanoparticles in Bio - Medical Research
Somesree GHOSHMitra, Nathaniel Mills (Texas Woman’s U., Denton, TX),
Santaneel Ghosh, Jai N. Dahiya (Southeast Missouri St.U., Cape Girardeau).
Tong Cai, J.A. Roberts (U. North Texas, Denton)
Improvement In Functional Properties Of Potato Starch/Nano-Cellulose Fibre (NCF)
Nanocomposite Films Niranjan R. Savadekar, U.S. Annapure, S.T. MHASKE
(Inst. Chem Tech., Mumbai, Mumbai, India)
Mechanical Reliability of Bio-Composites from Bovine Teeth
Yehia M.S. El-SHAZLY (Alexandria U., Egypt), Mariana A. Moussa
(Bibliotheca Alexandrina, Egypt)
Preparation And Characterisation Of Hyrophilic/Hydrophobic Composite Scaffolds
Chengdong JI, Xia Zhong (U. Sydney, Australia), Sergei G. Kazarian (U. College,
London, UK), Andrew Ruys, Fariba Dehghani (U. Sydney) Mon-Wed
Preparation And Characterisation Of Conducting Biopolymer-Carbon Nanotube
Composite Materials Ali ALDALBAHI, Marc in het Panhuis (U. Wollongong,
Australia)
Are NHANES Reference Data Applicable to the Taller Canadian Children?
FILLER, Abeer Yasin (U. Western Ontario, Canada)
Bioactive Glass Scaffolds for Bone Tissue Engineering
Qiang FU (Lawrence Berkeley Nat La., Calif.), Eduardo Saiz (Imperial Coll., UK),
Antoni P. Tomsia (Lawrence Berkeley N.L.)
Multifunctional Cationic Superparamagnetic Nanoparticles For Gene Delivery And
Imaging Chao LIN (Tongji U., Shanghai, China), Qianqian Ma (Tongji Hospital),
Bo Lou (Tongji U.)
Nanocomposite Thin Layers Synthesized By Advanced Pulsed Laser Technologies For
Biomimetic Implant Coatings Ion N. MIHAILESCU (Ilfov, Romania)
Noise Corrected Imaging Plate Scanner – An Ideal Electron Detector For Transmission
Electron Microscopy Petra BELE (TU Munich, Germany)
In Vivo And In Vitro Toxicity Of Ag-Nps-Containinghydrogel In Reproductive Organs
And In Hela Cells Liming XU, Liang Chen, Xuefei Li, Zhe Dong (Nat. Inst Food Drug
Control, Beijing, China), Gang Wu (Inner Mongolia U. Sci Tech, Baotou, China),
Chunren Wang, Tingfei Xi (Beijing, China)
CHEMISTRY of COMPOSITES
Improvement Of R-Plane Oriented Cr2O3 Thin Films Surface Grown On Sapphire
Substrates Nobuyuki IWATA, Takuji Kuroda, Kento Norota, Yoshito Tuchiya,
Yuta Watabe, Kouichi Takase, Hiroshi Yamamoto (Nihon U., Chiba, Japan)
Growth Of AFeOX (A = Ca, Sr) By Pulsed Laser Deposition Method At High Pressure
Oxygen And Ozone Atmosphere Kento NOROTA, Yoshito Tsuchiya, Yuta Watabe,
Takuji Kuroda, Nobuyuki Iwata, Takuya Hashimoto, Hiroshi Yamamoto (Nihon U.,
Chiba, Japan)
Preparation of Organic-Inorganic Hybrid AR Coating by Sol-gel Process
Xinxiang Zhang, Xi Ke, Sida Zhang, Zhili He, Bo JIANG (Sichuan U., Chengdu, China)
Formation And Properties Of Poly(Vinyl Butyral)-Zirconia Hybrids
Koji NAKANE, Kosuke Mizutani, Ruonan Zhang, Nobuo Ogata (U. Fukui, Bunkyo,
Japan)
Mixed Ionic Conduction In Homogeneous And Layered Composite Electrolytes
F.M.B. MARQUES, T. Saradha, A.S. Fereira, S.G. Patrício, F.M.L. Figueiredo
(U. Aveiro, Portugal)
Reinforcement Of Starch-Based Biocomposite Film By Microcrystalline Cellulose From
Corn Husk Melissa B. AGUSTIN, Rohit C. Tilwani, Eriel May T. Bandong,
Joel R. Salazar (Central Luzon St.U., Nueva Ecija, Philippines), Weerachai Phutdhawong
(Kasertsart U., Nakhorn Pathom, Thailand)
Enlargement Of Grains Of Silica Colloidal Crystals By Centrifugation With An Inverted-
Triangle Shaped Container Kaori HASHIMOTO, Yoshihisa Suzuki, Atsushi Mori,
Shin-ichiro Yanagiya, Katsuhiro Tamura (U. Tokushima, Japan)
Observation Of Mobile Lattice Defects In A Colloidal Crystal
Makiko SAKABE, Yoshihisa Suzuki, Takahisa Fujiwara, Atsushi Mori,
Shin-ichiro Yanagiya, Katsuhiro Tamura (U. Tokushima, Japan)
Vortex-Induced Assembly Of Protein Nanofibrils: Towards New Scaffold Materials
Wojciech DZWOLAK (U. Warsaw, Poland)
Novel Application Of Insulin Amyloid Superstructures As Templates For Surface-
Enhanced Raman Scattering Slawomir WOJCIK, Wojciech Dzwolak
(U. Warsaw, Poland)
Perylene Diimide (PDI) Based Organic Photovoltaic Cells with Nano-Fabric Composite
Structure Yong MIN, June H. Park, Austin R. Carter, Lynetta M. Mier,
Sharlene M. Lewis, Raju P. Nandyala (Ohio St.U., Columbus)
Atom Counting And Atomic Structure For Monolayer-Protected Gold Clusters Via
Quantitative HAADF- STEM Zhiwei WANG (U. Birmingham, UK), O. Toikkanen
(Aalto U., Finland), F. Yin, Z.Y. Li (U. Birmingham), B.M. Quinn (Aalto U.),
R.E. Palmer (U. Birmingham)
Step Velocity On The {110} Faces Of Tetragonal Lysozyme Crystals Under High Pressure
Takahisa FUJIWARA, Yoshihisa Suzuki (U. Tokushima, Japan), Gen Sazaki
(Hokkaido U., Japan), Shin-ichiro Yanagiya, Katsuhiro Tamura (U. Tokushima)
Microfluidic Fabrication Of Colloidal Crystal Films And Spheres
Toshimitsu KANAI (Yokohama Nat. U., Japan)
Impact Of Chemical Functionalization Of Swcnts On PPY Nanocomposites: Multiscale
Molecular Modeling And Experimental Investigations Mariana IONITA,
Alina Pruna (U. Poli Bucharest, Romania)
Pd Nanoparticles Deposited On Poly(Lactic Acid) Grafted Carbon Nanotubes: Synthesis,
Characterization And Application in Heck C-C Coupling Reaction
Gururaj M. Neelgund, Aderemi OKI (Prairie View A&M U., TX)
Inorganic Polyoxide Thermoplastics
Alexander SHAULOV, A. Grachev, A. Lyubimov, G. Lyubimova, E. Stegno, A. Berlin
(Semenov Inst., Moscow, Russia)
Green Tea Mediated Biosynthesis Of alpha-Fe2O3 Nano˗/ Micro-Particles And Their
Characterization Bashir AHMMAD (Okayama U., Japan), Junichi Kurawaki
(Kagoshima U., Japan), Takahiro Ohkubo, Yasushige Kuroda (Okayama U.) Vertical Growth Of Metallic Boride Nanowires And Their Field Emission Properties
Robert M. Jacobberger, Joseph R. Brewer, Chin Li CHEUNG (U. Nebraska, Lincoln)
Polymer/Layered Double Hydroxide Nanocomposites
Kongli Xu (Inst.Chem, CAS, Beijing, China), Guangming CHEN (Graduate Univ. CAS,
Beijing, China)
Synthesis And Characterization Of Nanocatalysts For The Direct Electrooxidation Of
NaBH4 In A Solid Alkaline Membrane Fuel Cell Christophe COUTANCEAU,
M. Simoes, S. Baranton (U. Poitiers, France)
The Effect Of Boundary Layer On Activated Liquid Phase Sintering Of W-bronze
Composites by Co and Fe Additions Mohamad S Kahtan, R. Azmi (U. Malaysia
Perlis)
Quantum Chemical Modeling Of Spectral Properties And Electron Transfer In Extended
Systems Stanislav ZALIS, Hana Kvapilova (ASCR, Prague, Czech Rep.),
Irena Kratochvílova, Jakub Sebera (ASCR), Antonín Vlcek, Jr. (U. London, UK),
Rainer F. Winter (U. Regensburg, Germany)
New Approach To The Investigation Of The Phase Transitions In Long-Chain Molecular
Crystals With Different Types Of The End Groups Vyacheslav MARIKHIN,
Victor Egorov, Liubov Myasnikova (Ioffe, St. Petersburg, Russia)
Kinetics And Thermodynamics Of Model Colloidal Particle Deposition On Synthetic
Polymer Surfaces Lubomir LAPCIK, Jr., M. Frastík, P. Smolka, B. Lapcikova
(Tomas Bata U., Zlin, Czech Rep.)
High Molecular Weight Soft Segment based Polyethylene Shape Memory Polymers
M. AHMAD (U. Bolton, UK), B. Xu (Heriot-Watt U., Edinburgh, UK), H. Purnawali
(Nanyang T.U., Singapore), P.J. King, P. Chalker (U. Liverpool, UK), Y.Q. Fu
(Heriot-Watt U.), W.M. Huang (Nanyang T.U.), M. Miraftab, J.K. LUO
(U. Bolton, UK)
Oxidation Of MoSi2/SiOC/SiC Composite
Sung-June BONG, Min-Jung Kim, Sang-Hwan Bak, Dong-Bok Lee
(Sungkyunkwan U., Suwon, S. Korea)
Oxygen Permeation Study And Extraordinary Improvement Of Oxygen Flux Through
La0.6Sr0.4Ti0.3 Fe0.7 O3-δ -Coated Ba0.5 Sr0.5 Co0.8Fe0.2 O3-δ Perovskite
Tubular Membranes Jong Pyo KIM (Chungnam Nat. U., Daejeon, S.Korea),
Jung Hoon Park, Edoardo Magnone (Korea Inst Energy Res., Daejeon), Yongtaek Lee
(Chungnam Nat.U.)
Fabrication Of Vanadium/Y2O3-Stabilized ZrO2 Composite Membranes By A Two-Step
Sintering Process For Advanced H2 Production At Low Temperature
Sung Il Jeon, Jung Hoon Park, Edoardo Magnone, Soo Hyun Choi (Green House Gas
Research Center, Korea Inst. Energy Res., Daejeon)
Polymer-Containing Catalytic Nanocomposites
Esfir SULMAN, Valentina Matveeva, Mikhail Sulman (Tver T.U., Russia)
PP-Clay Nanocomposites: Degradation and Stabilisation
S. Al-MALAIKA, H.H. Sheena (Ashton U., Birmington, UK)
Pressure-Volume-Temperature Of Neat Polyvinyl Alcohol And Blending With Cassava
Starch Compound Chong-Yu LOW, Tin-Sin Lee (UTAR, Kuala Lumpur, Malaysia)
Effect Of Particle Size And Concentration Of Mica On Properties Of Polytrimethylene
Terepthalate Vivek. R. GAVAL, R.S.N. Sahai, S.P. Deshmukh, P.A. Mahanwar
(Inst. Chem. Tech., Mumbai, India)
Effect of Cr on the Oxidation Resistance Of Nb-Cr-Mo-Si-B Alloys
S.K. VARMA, Benedict Portillo (U. Texas El Paso)
The Effects of Functionalized Graphene Sheet on The Properties of Poly
(ethyl methacrylate) Su-Jin HAN, Seong Min Oh, Hyung-il Lee, Han-Mo Jeong
(U. Ulsan, S. Korea)
Fire Retardation Effect Of Graphite Oxides On Epoxy Resin
Kyung Min OH, Yu Rok Lee, Soon Cheol Kim, Hyung-il Lee, Han-Mo Jeong
(U. Ulsan, S. Korea)
Hierarchical Porous Materials Templating from Nanoparticle-Stabilized Emulsions
To NGAI, Zifu Li (Chinese U. Hong Kong)
GENERAL APPLICATIONS and Processing of materials
Effect of Refining Pretreatment on Preparation Of Cellulose Nanofibrils By Mechanical
Process A.K. BHARIMALLA, V.S. Karande, S.T. Mhaske, N. Vigneshwaran
(Mumbai, India)
Application Of Atmospheric Pressure Plasma Treatment To Improve Hydrophilc Property
Of Aluminum Foil JaeHa LEE, JaeYoung Jang, Kyong Yop Rhee (Kyung Hee U.,
Yongin, S. Korea), HyunWook Kim (Dongwon Tech Co. Kimhae, S. Korea)
Atmospheric Pressure Plasma Treatment Of Polypropylene As Door Panel Part Material
JaeYoung JANG, JaeHa Lee, KyongYop Rhee (Kyung Hee U., Yongin, S. Korea),
Hyun Wook Kim (Dongwon Tech Co., Gimhae, S. Korea)
Improvement Of Hydrophilic Property Of Magnesium Alloy Panel Through Oxygen
Plasma Modification Kyong Yop RHEE, Jae Young Jang (Kyung Hee U., Yongin,
S. Korea)
Non-covalently Functionalized Carbon Nanotubes as Catalyst Supports for Fuel Cell
Applications Shuangyin WANG, Xin Wang (Nanyang T.U., Singapore)
Design And Simulation Of The Ultrasonic Spot Metal Welding Horn Used To Improve
Welding Performance Ziad Al-SARRAF (U. Glasgow, UK)
Micro/Nanoengineered Thermal Ground Plane
Tao DENG, Shakti Chauhan, Chris Eastman, Peter De Bock, Pramod Chamarthy,
Stan Weaver (GE Global Res.Cen., Niskayuna, NY)
Nanomaterials for Tunable Passive Microwave Devices
Yuliang ZHENG, A. Gaebler, M. Koeberle, R. Jakoby (T.U. Darmstadt, Germany)
TiO2 Nanotubes- Applications in Nanotemplates and Photovoltaics
Dongdong LI, Dongfang Liu, Xiaohong Fang, Linfeng Lu, Changzhou Wang,
Xiaoyuan Chen (Shanghai Adv. Res. Inst., China)
Preparation Of Short Carbon Fiber/Sic Multilayer Composites By Tape Casting
Wenshu YANG, Claudio Badini (Politec Torino, Italy), Laura Fuso (Dronero, Italy),
Sara Biamino, Claudia Vegabolivar Bolivar, Paolo Fino (Politec Torino, Italy)
Non-Destructive Evaluation Of Carbon-Carbon Composites Using Infrared Thermography
Tsuchin Philip Chu, Jarlen Don, Yicheng Pan, Anish Poudel (Southern Illinois U.,
Carbondale)
Mixing Solid Particles in Fluidized Beds
Haihong FAN, Delong Xu, Yong Min, Hui Li, Yanxin Chen, Jinhe Fan (Xi’an U.
Architecture & Tech., China)
Self-Assembled Nanometric Spacer on Surface of Natural Rubber Composited with TiO2
Kritsada Phatcharasit, Wirach TAWEEPREDA (Prince of Songkla U.,Hat-Yai, Thailand)
Functionalized Carbon Nanotubes And Anode Degradation In High Temperature PEM
Fuel Cells A. Orfanidi, M.K. Daletou, S.G. NEOPHYTIDES (Hellas Inst., Patras,
Greece)
Fabrication Of A Three Dimensional Superhydrophobic Surface Structure And
Characteristics Of Flow Past It Dongseob KIM, Woonbong Hwang*
(POSTECH, Pohang, S. Korea)
Using Quality Tools to Reduce Surface Depression Defect on Composite Panels
M. Iqbal HUSSAIN, Zuraidah Mohd Zain, Khairul Bakhtiar b Baharim
(U. Malaysia Perlis)
Development Of Nanocomposite Mold Insert For Microfabrication Of Polymeric
Microfluidic Devices R.K. Jena, CheeYoon YUE, Y.C. Lam (Nanyang T.U.,
Singapore)
Transparent Superhydrophobic Surface With Self-Cleaning Effect
Changwoo LEE, Kyungjun Lee, Sungnam Lyu, Sangmin Lee (Pohang U.Sci.Tech.,
S. Korea),Youn Sang Kim, Woonbong Hwang (Seoul N.U., S. Korea)
A Case Study On BIM Based Building Energy Evaulation
Sang-Tae NO (ChungJu Nat. U., S. Korea)
Optical And Microwave Communication Using New Materials – An Overview
Otto STROBEL, Elke Dietrich (Esslingen U. App Sci, Germany), Jan Lubkoll
(Erlangen Friedrich-Alexander U., Germany)
Fiber-Optic Communication For Vehicles, Airplanes And Vessels
Jan LUBKOLL (Erlangen Friedrich-Alexander U., Germany), Otto Strobel
(Esslingen U. App. Sci., Germany)
Multifunctional Hybrid Structures for Energy and Environmental Applications
Hema Vijwani, Adam Maleszewski, & Sharmila M. MUKHOPADHYAY
(Wright St.U., Dayton, OH) Mon-Wed
Development Of A Correlation Speed Measurement For Automotive Applications
Christian BETZ (Esslingen U. App. Sci., Germany), Vladimir V. Rastorguev
(Moscow Aviation Inst., Russia), Otto Strobel (Esslingen U.App.Sci.)
Smart Materials Tectonics: Development Of Solid Electrolyte Dendrites With Micro
Lattice Structures To Realize Fuel Cell Miniaturizations Soshu KIRIHARA,
Katsuya Noritake, Satoko Tasaki and Hiroya Abe (Osaka U., Japan)
Luminescence Light Waveguide And Lasing Properties In Some Doped II-
Visemiconductor Nanowire Bingsuo ZOU, Guozhang Dai, Ruibin Liu (Beijing
Inst.Tech., China)
Enhancing Modern Mobile Communication Systems Using Tunable Components Made Of
Material Utilized In New Fields Of Application Kira KASTELL (U. App. Sciences,
Frankfurt, Germany)
Monolayer Molecular Doping For Cost-Effective Photovoltaics
Fei XIU (City U. Hong Kong, China), Miao Yu (Hong Kong UST), Johnny C. Ho
(City U. Hong Kong), Zhiyong Fan (HKUST)
Design Of Clamping Apparatuses And Fatigue Testing Procedures Of A Vertical-Axis
Composite Wind Power System Feng-Min Lai, Chao-Chieh YANG (U. Da-yeh,
Changhua), Jing-Wun Liou (Nat. Chiao-Tung U., Hsinchu), Chen-Mao Yang,
Chun-Hsiang Lan (U. Da-yeh) Friday
Design Of Clamping Apparatuses And Testing Procedures Of A Vertical-Axis Composite
Wind Power System Feng-Min LAI, Chao-Chieh Yang, Chen-Mao Yang,
Chun-Hsiang Lan (Da-yeh U., Changhua) Friday
Synthesis and Characterization of Cathode Material for Li-ion Batteries
Umair NISAR, Q.J. Khattak (GIK Inst., Topi, Pakistan), Mohsin Saleem, R.A. Shakoor
(KAIST, DAejeon, S. Korea), Ali Hussiana, F.A.Khalid (GIK)
Wet Electrospun CuNP/Carbon Nano Fibril Composites: Potential Application for Micro
Surface Mounted Components Awad Kh. Al-ASMARI (AlKharj U., Saudi Arabia)
Experimental Study On Polyester Based Concretes Filled With Glass Fibre Reinforced
Plastic Recyclates -A Contribution To Composite Materials Sustainability
M.C.S. RIBEIRO, A. Fiuza, M.L. Dinis (U. Porto, Portugal), A.C.M. Castro,
F.G. Silva, J.P. Meixedo, M.R. Alvim (Polytech. Porto, Portugal)
Tribological Properties of Quantum Dot/PMMA Nanocomposite Films
Min ZOU, Alex Arguelles (U. Arkansas, Fayetteville), Y. Andrew Wang (
Ocean NanoTech, Springdale, AR)
Nano-Electrocatalysts Based On Carbon Nitride Supports For The Orr And For In Pem
Fuel Cells Vito DiNOTO, Enrico Negro (U. Padova, Italy)
Experimental Investigation of the Performance of Fiber Reinforced EPDM for Automotive
Radiator Hoses Mehdi GHATUS (Lawrence T.U., Southfield, MI), Chris Kargula
(Auburn Hills, MI), Chris Riedel (Lawrence T.U.)
Studies On Polymer-ZnO Nanowires Composites For Gas Sensing Application
Shiv Kumar GUPTA, Niranjan Ramgir, Manmeet Kaur, Niyanta Datta,
Vibha Saxena, Aditee Joshi, Ajay Singh, Dinesh Kumar Aswal
(Mumbai, India)
Relations Between Phase Diagram, Kinetics Of Thermal Annealing Process, And
Morphological Stability In Polymer:Fullerene Blends For Bulk Heterojunction
Solar Cells Guy VanASSCHE, F. Demir, B. Van Mele (Vrije U. Brussel, Belgium),
J. Manca, D. Vanderzande (Hasselt U., Diepenbeek, Belgium)
Optimization Of Cellulose Fiber Isolation From Rice Straw And Its Application For
Thermoplastic Composite Formation Siritorn NARKCHAMNAN,
Chularat Krongtaew (Mahidol U., Thailand)
In-Situ Fabrication And Thermoeletric Properties Of Bismuth-Polyaniline Nanocomposites
Yuanyuan WANG, Xi Yao, Kefeng Cai (Tongji U., Shanghai, China)
Rheological Behavior Of Epoxy-Amine Systems Modified By Sepiolite
Clara M. GOMEZ (U. Valencia, Spain), Andres Nohales (Castellon, Spain),
Paula Felix (U. Valencia)
The Complex Permittivity And Permeability Of PMMA/Fe3O4 NPS/Ag NPS Composites In
The Microwave Range WenHsien Sun (Ind.Tech Res. Inst.Hsinchu),
DungShing HUNG (Ming Chuang U., Taipei), Tsing Tang Song (ITRI, Hsinchu),
Shang Fan Lee (Academia Sinica, Taipei)
Design & Development Of ‘Programmable Transceiver Controller (A Nanotechnology
Device)’ For Wimax/Wifi Wireless Communication. S. Devendra K. VERMA,
P. K. Barhai (Birla I.T., India)
Optical Absorption Of Three-Dimensional Nanoporous Structures
SiuFung LEUNG, Qingfeng Lin, Miao Yu (Hong Kong U.S.T.,China), Kyungmok Kwon
(KAIST, S. Korea), Yunze Long (HKUST), Kyoungsik Yu (KAIST), Zhiyong Fan
(HKUST)
Advanced Dispersion Strategies And Property Design For CNT/Rubber Nanocomposites
Heike ZIMMERMANN, Robert H. Schuster (Hannover, Germany)
Mechanical Properties Study of Advanced Pultrusion Epoxy Composites
Leiming DENG, Junwei Qi, Jun Xiao, Chong Dou (NUAA, Nanjing, China)
Polyethylene: The Next Frontier For Self Reinforced Polymer Composites
Lucas MORGAN, B. Weager (NetComposites, Chesterfield, UK), J. Clarke, N. Thomas
(Loughborough U., UK)
Applications Of Nanotechnology In High Voltage Power Equipment - Nanodielectrics
George CHEN (U. Southampton, UK) INVITED 25 min
Computation And Stereographic Visualization Of Temperature And Heat Flux In A
Thermal Barrier Coating Of A Turbine Blade Stephen Akwaboa, S. Kodiyalam,
Amitava JANA, P. Mensah, R. Diwan (Southern U. Baton Rouge, LA)
Processing Of Carbon-Carbon Composites For Aircraft Brake Applications
Jarlen DON, Tsuchin Philip Chu (Southern Illinois U., Carbondale)
Nanotechnology: Trends for Oil well Production
Oscar CORONA, A. Balza, J. Brito, A. Colina (Los Teques, Venezuela)
Preparation and Characterization of Pb-free (Na, K)NbO3-Based Ceramics For
Eco-Friendly Piezoelectric Device Jeong Seon HAN, Hee Chul Lee (Korea Polytech
U., Kyunggi)
Review Of Automated Tape Laying Trajectory Planning
Junfei LI, Xianfeng Wang, Jun Xiao (NUAA, Nanjing, China)
Enhancement Of Wear And Impact Property Of Poly(Butylene Terephthalate) By E-Beam
Process Joon-Pyo JEUN, Keum-Jin Ko, Bum-Sik Shin, Hyun-Bin Kim,
Young-Chang Nho, Phil-Hyun Kang (KAERI, S. Korea)
Hot-Press Fast-Bonded Technology For Prepreg Wiinding
Biao YAN, Jun Xiao, Liwei Wen (NUAA, Nanjing, China)
Understandings of Solid Particle Bonding Behaviors in Warm Spray Deposition
Makoto WATANABE, KeeHyun Kim, Seiji Kuroda (NIMS, Tsukuba, Japan)
SEM Visualization Of CNTS In CNT/Epoxy Composites At Low Accelerating Voltage
Wenjing LI, Wolfgang Bauhofer (Hamburg U.T., Germany)
Influence Of Z-Pin’s Curing Degree On Properties Of Laminates And Its Mechanism
Wei SHANG, J. Xiao , P.Z. Cheng, L.M. Deng. Q.Y. Chu (NUAA, Nanjing, China)
Fiber-Metal Hybrid Laminates As Structural Material In Towers For Offshore Wind
Energy Converters J.C. Suarez (U. Poli Madrid, Spain), X. MENG (Ocean U. of
China, Qingdao), S. Guzman, M.A. Herreros, I. Diez (U. Poli Madrid)
Synergistic Effect Of Phosphorus-Containing Nanosponge On The Intumescent Flame
Retardant Polypropylene Xuejun Lai, Xingrong ZENG, Hongqiang Li, Changyu Yin,
Haili Zhang, Kecheng Gong (South China U.T., Guangzhou)
Nanodiamonds From Pulsed Plasma Generated In Water
Imil A. AKKOZIEV, S.K. Sulaymankulova, A.S. Mametova, J.K. Zhasnakunov
(KRSU, Kyrgyzstan)
Self-Organization Of Nanoparticles Of Copper, Silver And Gold In Pulsed Plasma In
Liquid S.K. Sulaimankulova, Imil A. Akkoziev, A.S. Mametova,
Bektur K. AKKAZIEV (KRSU, Kyrgyzstan)
Fabrication Of Calcium-Phosphate Cements From Hydroxyapatite Powders Surface-
Modified With Various Concentrations Of Sodium Inositol Hexaphosphate And
Their Material Properties Toshiisa KONISHI, Minori Mizumoto, Michiyo Honda
(Kanagawa Acad Sci Tech., Japan), Zhi Zhuang, Mamoru Aizawa (Meiji U., Japan)
Quasi-One-Dimensional Transport And Thermoelectricity: Peierls Distortion In Indium
Selenides Jong-Soo RHYEE (Kyung Hee U., S. Korea)
An Investigation On The Tribological Properties Of Over Deformed Al/SiCP Composites
M. Baki KARAMIS, F. Nazlı Sarı, Veysel Erturun (Erciyes U., Turkey)
Explosive Welding Of Magnesium Alloy With Aluminum And Stainless Steel
P. MANIKANDAN, Joonoh Lee, Akihisa Mori, Kazuyuki Hokamoto
(Kumamoto U., Japan)
Application of Box-Behnken in Turning of Inconel 718 using PVD Carbide Tools under
Minimum Quantity Lubrication Gusri Akhyar IBRAHIM, Che Hassan Che Haron,
Jaharah Abdul Ghani, Ahmad Yasir Moh. Said, Moh. Zaid, Abu Yazid
(U. Kebangsaan Malaysia, Kuala Lumpur)
A Study On Curing Processes And Environmental Effects For Rapid Composite Repair
Faruk ELALDI (U. Baskent, Turkey), Pelin Elaldi (Bilkent U., Turkey)
Synthesis Of Superparamagnetic, Photocatalytic Nanocomposites For Water Purification
Darko MAKOVEC (Jozef Stefan Inst., Ljubljana, Slovenia), Marjan Sajko (Maribor,
Slovenia), Aljaz Selisnik (Celje, Slovenia) c, Miha Drofenik (U. Maribor)
Research on Automatic Tape Laying of Elliptical Cylinder
Liwei Wen, Xianfeng Wang, Junwei Qi, Xiaoping Li, Yi Wang (NUAA, Nanjing,
China), Yurong Chen (Nanjing Medical Secondary Sch., China)
Research On The Deformation Of Prepreg Tape Influenced By The Temperature
Xianfeng WANG, Liwei Wen, Junwei Qi, Xiaoping Li, Yi Wang (NUAA, Nanjing,
China), Yurong Chen (Nanjing Medical Secondary Sch., China)
Mechanical and Tribological Properties of Epoxy-CNT Nanocomposite Coatings
Huirong. LE (U. Plymouth, UK), A. Howson, M. Ramanauskas (U. Dundee, UK) chair
Thermomechanical And Precipitation Hardening Of Stir-Cast Silica Reinforced
Aluminium Alloy Matrix Composites S.S. SHARMA, K. Jagannath, N.S. Mohan,
Chandrashekhar Bhat, P.R. Prabhu, R.C. Chadaga (Manipal Inst. Tech., India)
Prediction of Sound Attenuation Characteristics of Muffler
Chandrashekhar BHAT, S.S. Sharma, K. Jagannath, N.S. Mohan (Manipal Inst.Tech.,
India), S.G. Sathisha (QUEST, Bemgaluru, India) chair
Performance Comparison Of Carbide And HSS Drills In Drilling Of GFRP Composite
Materials- An Experimental Study Using Design Of Experiments B.R.N. MURTHY, Lewlyn L. R. Rodrigues, D. Anjaiah (MIT, Manipal, India)
Carbon Nanotube Fiber For Photovoltaic Application
Tao CHEN, Zhibin Yang, Huisheng Peng (Fudan U., Shanghai, China)
Improvements To The Design Of A Particle Beam Cluster Source For Nanofabrication
Stuart Thornton, Chris Binns, Shian GAO (U. Leicester, UK)
Resin Flowing Analysis In Sandwich Laminates Under VARTM Process
Cheng-Hsien CHUNG (United Ship Design Dev Cen, Taipei), Yu-Ti Jhan , Ya-Jung Lee,
Yu-Chieh Wang (Nat. Taiwan U., Taipei)
High Thermal Conductivity Diamond Composites
F.M. SHAKHOV (Ioffe, St. Petersburg, Russia), A.M. Abyzov (St. Petersburg Inst.Tech.,
Russia), S.V. Kidalov (Ioffe, St. Petersburg)
Testing Of 2m Offset Thin-Shell Reflector Demonstator
Omer SOYKASAP, Sukru Karakaya (Afyon Kocatepe U., Turkey)
Application Of The Scourer Or Luffacylindrica Under Natural, Rigid And Flexible Resin
To Obtain A Natural Composite Material Daniela RINCON P,
Carlos A. Guerrero F, Fabio E. Sierra, Eliana Guerrero-Romero (U. Colombia)
Synthesis, Structure, and Reactivity of Dealloyed Bimetallic PtM3 Fuel Cell Cathode
Electrocatalysts Mehtap Oezaslan, Stefan Rudi (TU Berlin, Germany), Zengcai Liu
(Oak Ridge N.L., TN), Peter Strasser (TU Berlin, Germany, Oak Ridge N.L., TN)
Tues-Friday
Evaluation Of Thermal Sprayed Polymers For Tribological Applications
Carlos R. C. LIMA, Lucas P. Siqueira (UNNIMEP, Brazil), Flávio Camargo
(Santo Antonio de Posse, Brazil)
Investigation Of Powder Metallurgy Application For Uncooled Turbines
Herny EMILIE (Toulouse, France), Xinhu Wu (U. Birmingham, UK),
Jean-Francois Rideau (Toulouse, France)
Hereditary Type Model For Mechanical Behavior Of Viscous Polymers
Sofia ALEXEEVA, Alexander Mosin (Moscow, Russia) chair
Mechanical Properties Of Self Reinforced Poly(Lactic Acid) Prepared By Compression
Moulding Izan Roshawaty MUSTAPA, Robert A. Shanks, Ing Kong
(RMIT, Melbourne, Australia)
Improved Mechanical Properties Of Aluminium/Epoxy Composites Through Silane
Functionalization Of Aluminium Powder Jorge Ivan CIFUENTES, Jason Marroquin
(Kyung Hee U., Yongin, S. Korea)
Grown Ambient Effect In Gan Crystalline Quality On Si(111) By MOVPE
Bablu K. GHOSH (U. Malaysia-Sabah), Akio Yamamoto (Fukui U., Japan)
Microstructure Analyses On The Effect Of Incorporating Cigarette Butts In Fired Clay
Bricks Aeslina Abdul KADIR (UTHM, Johor, Malasia), Abbas Mohajerani (RMIT,
Melbourne, Australis)
Highly Efficient Ultraviolet Light Emission From Silicon Nanocrystals
Naoto SHIRAHATA (NIMS, Tsukuba, Japan) Mon-Wed
Manufacturing Biocomposite Parts Using LRTM
Jayaraman RAGHAVAN, B. O’Connor (U. Manitoba, Canada), G. Kime (Delaware,
Canada), B. Klimack, J.A. Milne (Carlson, Canada), P. Zanetel (New Flyer Ind.,
Winnipeg, Canada) Mon-Tues
Chemistry Of Some Oxide Based Nanomaterials For Energy Conversion Applications
A.K. TYAGI (Mumbai, India) INVITED 25 min
SOM Based Segmentation Method to Identify Water Region in LANDSAT Images
Win KONG, V.J. Tiagrajah (U. Tenaga Nasional, Selangor, Malaysia)
Monitoring Composite Blade of Vertical Axis Wind Turbine using Self Organizing Map
Ming Li, Ayo ABATAN (Miami U., Oxford, Ohio)
Behaviour of Core Shell Nanoparticle Catalysts in the PEMFC Environment
Sarah BALL (Johnson Matthey Tech., Sonning Common, UK)
Increasing The Octane Number Of Gasoline Using Praseodymium(Iii)-Ethylene Diamine
Tetra Acetate/Activated Clinoptilolite Zeolite Dewi TRISTANTINI, Eny Kusrini,
Vino Hasyim (U. Indonesia, Depok)
Silicon-Conjugated Polymers Nanocomposites Fabricated By A Two-Step Electrochemical
Approach Farid A. HARRAZ, Aliaa M. Salem (CMRDI, Cairo, Egypt)
Characterization Of Carbon Fibres Reclaimed From Steam-Thermal Recycling Process
Shengyin YE, Arezki Bounaceur, Yannick Soudais, Radu Barna (Ecole des Mines
d’Albi, France)
Important Design Elements of Large Flexible Ferris Wheels
Yongfeng LUO, Jie Bai, Xiaonong Guo (Tongji U., Shanghai, China)
Wet Electrospun CuNP/Carbon Ultra Fine Coils for Super Air Core Inductors
Awad Kh. Al-ASMARI (King Saud U., Saudi Arabia), Ashraf A. Ali (Al-Khari U.,
Saudi Arabia)
Wet Electrospun CuNP/Carbon Nano Fibril Composites: Potential Application for
Micro Surface Mounted Components Ashraf A. ALI (Al-Kharj U., S. Arabia),
Awad Kh. Al-Asmari (King Saud U., Saudi Arabia)
Nano Loop Optical Antenna
Hengjiang Ren, Zhongxiang SHEN (Nangyang T.U., Singapore)
Composite Repair Using VARTM Techniques
Ronald Sterkenburg, PengHao WANG (Purdue U., West Lafayette, IN) Effect of Particle Size And Concentration Of Fly Ash On Properties Of Polyester Thermoplastic
Elastomer Composites R.S.N. SAHAI, V.R. Gaval, P.A. Mahanwar (Inst. Chem Tech.,
Mumbai, India)
Improved Interfacial Strength of SMA Composite With Nanotreated Fibre Surface
Yulong WANG (Hong Kong Poly U., China), Zhenqing Wang (Harbin I.T., China),
Limin Zhou (Hong Kong Poly U., China)
Study of the Efficiency of UV and Visible-Light Photocatalytic Oxidation of Methanol on
Mesoporous RuO2-TiO2 Nanocomposites Adel A. ISMAIL (CMRDI, Cairo, Egypt),
Detlef W. Bahnemann (U. Hannover, Germany) Micro-Nano Mineral Study And New Mineral Discovery
Jinfu SHU (Carnegie Inst. Of Washington, DC), Jingsui Yang, He Rong (Inst of Geology,
Beijing), Ho-kwang Mao (Carnegie Inst.)
Design Of A Polyamide Composite For High Speed Sliding Conditions
A.M. ELEICHE (King Fahd U. Pet Min, Dhahran, S. Arabia), M.O.A. Mokhtar
(Cairo U., Egypt), E.S. Nasr, G.M.A. Kamel (Tech Res Cen, Cairo)
Characterization Of The Durability Of Surface Treatments Used In Adhesive Bonding
Susan PITT, Daren Peng, Rhys Jones (Monash U., Australia)
Development of Composite Structural Parts for a Vertical-axis Wind Turbine
Tai-Yan KAM, H.M. Su, R.R. Chang, F.M. Lai, J.H. Wu (Nat. Chiao Tung U., Hsinchu)
Controlled Synthesis of Sb Nanostructures and Their Conversion to CoSb3 Nanoparticle
Chains for Li-Ion Battery Electrodes Jixin Zhu, Qingyu YAN (Nanyang T.U.,
Singapore)
Development Of A Model For Online Monitoring Of Friction Stir Welding Using Acoustic
Emission Technique C.N. SURESHA, B.M. Rajaprakash B M, Upadhya Sarala
(U. Bangalore, India)
Hydrogen Storage In Metal-Decorated Nanostructureed Materials
Jisoon IHM, Keunsu Choi, Jaehyun Bae, Changwon Park (Seoul Nat U., S. Korea)
Mon-Tues before 3PM
Optimal Design of Molded Bark Particleboard Used in Heated Flooring System by using
Finite Element Analysis Ping YANG (Kumamoto U., Japan), Hidefumi Yamauchi
(Akita Pref. U., Japan), Hikaru Sasaki (Helix Ltd, Akita, Japan)
Laser Repair Hardfacing Of Titanium Alloy Turbine Blades
Andrzej A. KlimpeL, Marek BURDA (Silesian U.T., Gliwice, Poland)
Energy Harvester Device For Charging Applications
A.R. AKANDE, A. Nechibvute, P.V.C Luhanga (U. Botswana)
Mechanical Properties Of Injection Moulded Polylactic Acid – Kenaf Fibre Biocomposites
Hazleen ANUAR, A. Zuraida (IIUM, Kuala Lumpur, Malaysia)
Special Technology For Industrial Production Of Sandwiches From Metals
Mark R. LIBERZON (Moscow St. Aviation T.U., Russia)
Preparation Of Dielectric Embedded Silicon Nanocrystallites For Flash Memory
Applications H. WONG, O.Y. Wong, J. Liu (City U., Hong Kong, China)
Glass Fiber Reinforced Vinyl Ester Containing Nano-Al2O3 Composites for Pultrusion:
Process Feasibility and Kinetic Analysis Chin-Hsing CHEN (Chinese Culture U.,
Taipei), Yun-Yun Sun (Tung Fang Design U., AOHSIUNG), Yih-Chern Juang
(Chinese Culture U.)
Towards The Quantum Limits In Scaling Of Electronic Devices
Waldemar NAWROCKI (Poznan U.T., Poland)
Development Of Fracture Fixation Plates Prototype Through Metal Injection Moulding
(Mim) Process Mohd A. OMAR, I. Subuki, N. Abdullah, M.F. Ismail, A.H. Hashim
(SIRIM, Kedah, Malaysia), A.H. Zulkifly (U. Malyasia Kuantan, Pahang)
Nanostructured Composites: Potential Materials For Organic Light Emitting Diodes And
Organic Solar Cells NGUYEN Nang Dinh, Dinh Van Chau, Do Ngoc Chung,
Nguyen Phuong Hoai Nam (Vietnam Nat. U. Hanoi), Tran Quang Trung (Vietnam Nat.
U., HCM city)
Quasi-Static Experimental Study on the Constitutive Behavior of Automotive Windshield
Interlayer Bohan LIU, Mengyi Zhu, Yueting Sun, Jun Xu, Dongyun Ge, Yibing Li
(Tsinghua U., Beijing, China) npPOSTER
Evolution Of Structural Phase States Of Plasma-Hardened Rolls Surface Under Service
Victor GROMOV, Sergey Konovalov, Oleg Efimov, Anna Atroshkina
(Siberian St.U. Industry, Russia) ns Poster
High Energy Density Li-Air Batteries Using Carbon Nanocomposite Air Electrodes
Jianping ZHENG, G.Q. Zhang (Florida A&M U., FSU, Tallahassee) POSTER
INFRASTRUCTURE COMPOSITES
Discussion of Some Issues For Building Integrated Photovoltaics (BIPV) in Architectural
Design In China Changhai PENG, Ying Huang , Zhishen Wu (Southeast U., Nanjing,
China)
Strength Capacity Of One-Way Continuous Reinforced Concrete Slabs
Domagoj Matesan, Jure Radnic, Nikola GRGIC, Vatroslav Camber (U. Split, Croatia)
Effect Of Finger Joint Size And Orientation On The Tension Strength Of Eucalyptus
Regnans/Delegatensis Con Y. ADAM, B M Ahmed (Monash U., Melbourne,
Australia)
Strengthening of Reinforced Concrete Beams using Carbon Fiber Sheets bonded with
Cement-Based Mortars. Abdullah Hilal Al-SAIDY (Sultan Qaboos U., Oman)
Bond Characteristic Of FRP Embedded In Concrete For Retrofit Of Reinforced Concrete
Structure Soo-Yeon SEO (Chungju Nat.U., S. Korea), Luciano Feo (U. Salerno,
Italy), David Hui (U. New Orleans)
An Experimental Investigation on Internal Hydrophobation of Cement Based Materials
Mohammad H. BAGHBAN, Per Jostein Hovde, Stefan Jacobsen (Norwegian U.
Sci. Tech., Trondheim),
Environment-Assisted Subcritical Debonding Of Epoxy-Concrete Interface
Jialai WANG, Chao Zhang, Ken Fridley (U. Alabama, Tuscaloosa)
Estimation Of Nominal Moment Of Reinforced Concrete Members Strengthened With
FRP Baik-Soon CHO, Young-Soo Chung, Yeon-Wook Kim, Eunsoo Choi,
Sangsoo Jeon (Inje U., Gyeongnam, S. Korea)
Development of High-Performance Fiber-Reinforced Cementless Composite Mortar
Hyun-Jin LIM, Chang-Geun Cho (Chosun U., Gwangju, S. Korea)
Seismic Strengthening of Reinforced Concrete Columns by Applying Steel
Fiber-Reinforced Cementitious (SFRC) Mortar Sung-Jin HAN, Chang-Geun Cho,
Eui-Sik Kim (Chosun U., Gwangju, S. Korea)
Seismic Performance Improvement of RC Columns by Applying High-Performance Fiber
Cementitious Mortar Chang-Hwan PARK, Chang-Geun Cho, Jeong-Sup Kim
(Chosun U., Gwangju, S. Korea), Luciano Feo (U. Salerno, Italy), David Hui
(U. New Orleans)
Influence Of Concrete Skin On De-Icing Salts Resistance
Pavel REITERMAN, Karel Kolar, Michaela Kostelecka, Ondrej Holcapek
(Czech T.U., Prague)
High Strength Natural Fibre Composites for Construction
Mizi FAN (Brunel U., UK)
Induced Size Effects Of Gd3+ Ions Doped NiZn Ferrite Nanoparticles
Balwinder KAUR (Jammu, India), Manju Arora, A.K. Srivastava, R.P. Pant
(New Delhi, India)
Experimental Study for Performance Evaluation of Large Double Head Studs in High
Strength Concrete HakBo SHIM, Sung Hun Jang, JooHo Lee, HyoSeon Park
(Lotte Res.Dev. Inst., S. Korea)
Air Permeability Test Of Concrete Tube Structures With Joints
Joonam PARK, Lee-Hyeon Kim, Seong-Won Nam (Korea Railroad Res.Inst., Kyunggi)
Fire Resistance Properties of Hybrid Fibers Reinforced High Strength Concrete
JeongSup KIM, CheolHee Cho, MyungHwan Yoo, JaeHwan Kim, ChangGeun Cho,
YoungSuk Shin (Chosun U., Gwangju, S. Korea)
Bayesian Belief Network Model for the Deterioration of a Suspension Bridge
Taejun CHO (Daejin U., Pocheon, S. Korea)
A Study For The Changes Of The Micro Structure By Deterioration Factors For NPP
Concrete Structures KiBeom KIM, Do Gyeum Kim, Ho Jae Lee, Jang Hwa Lee,
(Korea Inst Construct. Tech., Gyeonggi)
Analytical Evaluation For Shear Strength Of Beam-Column Connections Strengthened
With CFRP Composites Kien Le-Trung, Kihak LEE (Sejong U., Seoul, S. Korea),
Do Hyung Lee (Paichai U., Daejeon, S. Korea), Luciano Feo (U. Salerno, Italy),
David Hui (U. New Orleans)
Reinforcement of Plain Concrete Piers of Railroad Bridges using Composite of FRP-Steel
Plates Eunsoo CHOI, Young-Soo Chung, Joonam Park, Baik-Soon Cho (Hongik U.,
Seoul, S. Korea)
Behaviour Of FRP-Confined Concrete-Filled Steel Tubular Columns Subjected To
Combined Axial And Cyclic Lateral Loads Tao YU, Y.M. Hu, J.G. Teng
(Hong Kong Poly U., SAR, China)
Experimental Observation Of Rc Columns Strengthened With Stainless Steel Wire
Do Hyung LEE (PaiChai U., Daejeon, S. Korea), Byeong Hwa Kim (Kyungnam U.,
Kyungnam, S. Korea), Sung Hoon Kim (Seoul N.U., S. Korea), Jun-Hyeok Choi
(Seoul, S. Korea)
An Experimental Study For Carbonation Effect On The Concrete Using MIP and SEM
Ho Jae LEE, Do Gyeum Kim, Ki Beom Kim (Korea Inst Const.Tech., Gyeonggi),
Hyung Ju Kim (Seoul, Korea)
A Study On Microstructure Change By Carbonation In NPP Concrete
Do Gyeum KIM, Ho Jae Lee (Korea Inst Const.Tech., Gyeonggi), Hyung Ju Kim
(Seoul, Korea)
Lateral And Restrained Distortional Buckling Of Doubly-Symmetric Steel I-Beams
Alper Buyükkaragoz, Ilker KALKAN (Kirikkale U., Turkey)
Use of Waste polyethylene as a Concrete Additive: Surface Modification of PE by Grafting
PAM Po-Yu Ko (Nat. Chiayi U., Chiayi), Chun-Ku Lu (Nat. Cheng Kung U., Tainan),
Maw-Tien LEE (Nat. Chiayi U.)
The Characteristics of the Cement Mortar with Acetone-treated Rubber Crumbs
Chun-Ku Lu (Nat. Cheng Kung U., Tainan), Liang-Hsing CHOU, Ying-Yu Shiu
(Nat. Chia-yi U., Minxiong)
Multi-Phase Modeling Of Ionic Transport In Concrete When Subjected To An Externally
Applied Electric Field Qingfeng LIU, Long-yuan Li, Jian Yang (U. Birmingham,
UK)
Longitudinal Wave Velocity Of Bonded PSC Wires Embedded In Nuclear Containment
Byeong Hwa KIM (Kyungnam U., S. Korea), Do Hyung Lee (Paichai U., Daejeon,
S. Korea)
Numerical Modeling Of Double Skin Profiled Composite Shear Wall System Under
In-Plane Monotonic Loadings Shahryar RAFIEI, Khandaker M.A. Hossain,
Mohamed Lachemi, Kamran Behdinan (Ryerson U., Toronto, Canada)
On The Shear Forces Distribution In Double Lap Bolted FRP Joints: Numerical And
Experimental Investigations Francesco Ascione, Luciano FEO (U. Salerno, Italy)
Using Microwave Transmission to Detect Decay in Wood
Graham BRODIE, Berhan Ahmed (U. Melbourne, Australia), Mohan V. Jacob
(James Cook U., Australia)
Storage Stability And Physical Properties Of Asphalt Modified With Nanoclay And Warm
Asphalt Additives Mohd Ezree ABDULLAH, Kemas Ahmad Zamhari,
Nafarizal Nayan (UTHM, Johor, Malaysia), Mohd Rosli Hainin (U.Teknologi Malaysia),
Madi Hermadi (UTHM, Johor, Malaysia)
Structural Health Monitoring Of Lattice Girder Railway Bridges
H.A.D.S. Buddika, P.B. Ranjith DISSANAYAKE (U. Peradeniya, Sri Lanka) chair
Environmental Effects On Polymer Insulators
Ibrahim O. HABIBALLAH (King Fahd U. Pet. Min, Dhahran, S. Arabia)
Fiber Composite Application To Protect Bridge Pier Caps From Corrosion Related
Deterioration In New England K. Wayne LEE, Rachel Nichols (U. Rhode Island,
Kingdton, RI), Craig M. Boyer (Electric Boat), P. Balaguru (Rutgers, NJ), C. Franco
(Rhode Island Dept of Trans.) Friday PM
Numerical Study for CFRP Strengthening of RC Columns for Blast Resistance
Saleh H. ALSAYED, Husain Abbas, Yousef Al-Salloum (King Saud U., S. Arabia)
Application Of Ant Colony Algorithm In Discrete Optimal Design Of Structural Truss
Yancang LI, Lina Zhao (Hebei U. Engineering, Handan, China)
Research On Concrete Mixing Sequence At The Time Of Feeding
Fangmeng CHENG, Yancang Li, Lei Wang (Hebei U. Engineering, Handan, China)
Load Test on Reinforced Concrete Beams Strengthened by Carbon Fibre Laminated
Plates—A Case Study Humayun R. H. KABIR (Kuwait U., Safat)
Nonlinear Analysis Of Reinforced Concrete Columns With Fiber Reinforced Polymer Bars
Ehab M. LOTFY (Suez Canal U., Egypt)
Analysis Of Sandwiched Composite Long-Span Foldable Beam
Norazman M. NOR, Agusril, Alias Yusof, Risby Sohaimi, Ahmad M.A. Zaidi
(UPNM, Nat Def. U. Malaysia)
Characterization Of Polymer Mortars Exposed To Some Acid Solutions.
C. GALAN-MARIN; C. Rivera-Gomez (U. Sevilla, Spain)
Recycling Optimisation Of Concrete Composites: An Experimental Study
Mohamed OSMANI (Loughborough U., UK)
Fibrous Brucite and Polypropylene Hybrid Fibers Reinforced Concrete
Kaiping LIU, Jiuran Wen, Zhihua Sun, Zhenjun Wang (Chang’an U., Xi’an, China),
Luciano Feo (U. Salerno, Italy), D. Hui (U. New Orleans)
Reliability-Based Design Optimization Of Adhesive Bonded Steel-Concrete Composite
Beams Yangjun Luo (Northwestern Poly U., Xi’an, China), Alex LI (U. Reims,
France)
Design and Testing of Road Side Guardrail Using Composite Materials A.S. DEBAIKY (Banha U., Egypt) POSTER
Reinforcement of Biodegradable Sago Starch/Natural Rubber Latex (B-SSNRL)
Composites by Ultrafine Calcium Carbonate M.M AFIQ, AR Azura
(U. Sains Malaysia, Penang) POSTER
Underground Structures Analysis In Jointed Rock Environment
Jirí Bostík, Kamila Weiglova (Brno U.T., Czech Rep.) nPOSTER
Modelling Of Underground Structure
Kamila Weiglova, Jirí Boštík (Brno U.T., Czech Rep.) nPOSTER
MAGNETIC COMPOSITES (Thin Films or Electronic Materials)
Depositions Of Proton Conductive Oxide Thin Films By Sol-Gel Method For Fuel Cell
Applications Kiyoshi UCHIYAMA (Tsuruoka Nat. Coll Tech., Yamagata, Japan)
High Energy Thermionic Electron Beam for Material Surface Modification
Munawar IQBAL, Haris Rashid (U. Punjab, Lahore, Pakistan)
Single-Walled Carbon Nanotube/PMMA Composite via an Electrostatic Adsorption
Assembly Technique Hiroyuki MUTO, Norio Hakiri, Go Kawamura,
Atsunori Matsuda (Toyohashi U.T., Japan)
Chirality Control And Vortex Manipulation In Nanomagnets
Kai LIU, Randy K. Dumas, Dustin A. Gilbert, Nasim Eibagi (UC Davis, Calif.)
Mon-Wed
Studies On The Structural, Electrical And Optical Properties Of Sprayed-Copper (I)
Iodide Thin Films Muhamad Nur AMALINA, A.R. Zainun, M. Rusop (U.T. MARA,
UiTM, Selangor, Malaysia)
GePhotoluminescence and Raman Analysis of Ge-Rich SiGe Nanowires
Hua GONG, Yingjie Ma (Fudan U., Shanghai, China), Peixuan Chen (IFW Dresden,
Germany), Lijun Wang (Acad Sci, Beijing, China), Armando Rastelli (IFW Dresden),
Zuimin Jiang, Zhenyang Zhong (Fudan U., Shanghai)
Pyroelectric Nano-Composite Thin Films
Shlomo BERGER, Nitzani (Technion, Israel) Mon-Wed
AB Initio Study Of Structural And Electronic Properties Of InN/Si And GaN/Si Interfaces
Ilya V. MUTIGULLIN, K.K. Abgaryan (RAS, Moscow), D.I. Bazhanov (Moscow
St.U.), O.V. Stepanyuk (RAS, Moscow)
Pulsed Laser Deposition Of LaFeO3 Thin Films Using The Target Prepared By Pechini
Method Yoshito TSUCHIYA, Kento Norota, Yuta Watabe, Takuji Kuroda,
Nobuyuki Iwata,Takuya Hashimoto, Hiroshi Yamamoto (Nihon U., Chiba, Japan)
Effect Of Substrate Temperature On Physical Properties Of Nanostructured Cds Thin
Films Prepared By Spray Pyrolysis Technique
N. Memarian, S.M. Rozati (U. Guilan, Iran)
Exchange Bias In Hybrid Nanocrystals Of Zinc Oxide
Alexandros LAPPAS (IESL-FORTH, Heraklion, Greece), Athanasia Kostopoulou
(IESL-FORTH and U. Crete, Greece), Franck Thétiot (IESL-FORTH), Ioannis Tsiaoussis
(Aristotle U.), Maria Androulidaki (IESL-FORTH), Pantaleo Davide Cozzoli
(Inst. Nanoscience, Lecce, Italy).
Static And Dynamic Strain Sensing Using A Polymer - Carbon Nanotube Film Strain
Sensor Michael K. NJUGUNA, Cheng Yan, John M. Bell, Prasad Yarlagadda
(Queensland U.T., Brisbane, Australia)
Fe-Based Soft Magnetic Bulk Metallic Glass With Flat Hysteresis Curves
Teruo BITOH, Shogo Izumi (Akita Prefectural U., Yurihonjo, Japan)
A Simulation Study On The Effects Of Nanotube Anisotropy And Non-Straightness On
The Electrical Properties Of Carbon Nanotube/Polymer Composites
Ali Erdem EKEN (TU Hamburg-Harburg, Germany), E.J. Tozzi (UC Davis, Calif.),
D.J. Klingenberg (U. Wisconsin-Madison), W. Bauhofer (TU Hamburg-Harburg)
Development of Electrochemical Impedance Spectroscopy for Evaluation Electrical
Properties of Chitosan Membranes Prajak SAEUNG, Wissarut Pauypung,
Pikul Wanichapichart (Prince of Songkla U., Thailand) Mon-Tues
Effect Of Calcination Temperature In Production Of Magnetic Nanoparticles For Arsenic
Adsorption Darunee BHONGSUWAN, Tripob Bhongsuwan, Nucharee Chomchoey,
Lakkana Boonchuay (Prince of Songkla U., Thailand) Mon-Tues
Observation of Local Electrochemical Phase Change in Resistive Switching Devices
Kohei FUJIWARA (Osaka U., Japan), Yosuke Konno, Yoshinobu Nakamura
(U. Tokyo, Japan), M.J. Rozenberg (U. Paris-Sud, France), Hidenori Takagi
(RIKEN, Saitama, Japan)
Effect Of CdSe Nanoparticle In P3HT:PCBM Organic Solar Cell
Mijung CHOI (Myongji U., Gyeonggi, S. Korea), Honghong Fu, Weiling Luan
(East China U.Sci.Tech., Shangha), Yong-Sang Kim (Myongji U.) Wed-Fri
Organic Thin Film Transistor Memory Based On CdSe Nanoparticle/PMMA Blend as a
Tunneling Layer Jung-Min KIM, Dong-Hoon Lee, Jun-Ho Jeun, Hyun Ho Lee
(Myongji U., Gyeonggi, S. Korea), Sung Sik Ko, Ik-Jun Yeon (Chungju N.U.,
Chungbuk, S. Korea), Yong-Sang Kim (Myonggi U.) Wed-Fri
Microfluidic PCR CHIP Integrated With MCU Controlled Temperature System
Dawoon HAN, Mijung Choi, You-Cheol Jang, Kamrul Islam, Rohit Chand,
Sandeep K. Jha (Myonggi U., Gyeonggi, S. Korea), SungSik Ko, Ik-Jun Yeon
(Chungju N.U., Chungbuk, S. Korea), Yong-Sang Kim (Myunggi U.) Wed-Fri
A Study Of The Hysteresis Mechanism Of Organic Thin Film Transistor With Poly
(4-Vinylphenol) Gate Insulator Jon-Ho JEUN, Jung-Min Kim, Dong-Hoon Lee
(Myongji U., Gyeonggi, S. Korea), Sung Sik Ko, Ik-Jun Yeon (Chungju N.U., S. Korea),
Yong-Sang Kim (Myongji U.) Wed-Fri
Nanocrysytals-Glass Composites For Photonic Devices Shifeng ZHOU, Yu Teng (Zhejiang U., Hangzhou, China), Jianrong Qiu
(South China U.T., Guangzhou)
Extrinsic-To-Intrinsic Transition And Sign Changes of Seebeck Coefficients for
PbTe Nanocrystals Wenwen ZHOU, Wenjing Zhang, Jan Ma, Qingyu Yan
(Nanyang U., Singapore)
Electrical Properties Of Few-Layer Boron Nitride
Hongxin ZHANG, Peter X. Feng (U. Puerto Rico)
Ultrasonic Characterization for Electronic Package’s Micro-structure
Chunguang XU, Zhongzhu Liu, Xinyu Zhao, Bolong Men (Beijing I.T., China)
Simulated Body Fluid Evaluation Of Titanium Oxide Layers Exhibiting Different
Morphologies Formed By Electrochemical Plasmacoating Process
Ki Ryong SHIN, Kang Min Lee, You Chan Jung (Hanyang U., Ansan, S. Korea),
Young Gun Ko (Yeungnam U.), Dong Hyuk Shin (Hanyang U.)
Electrochemical Response Of ZrO2-Mgo Layer On Mg Alloy Via Plasma Electrolytic
Oxidation Followed By Annealing Treatment KangMin LEE, Byung Uk Lee,
InJun Hwang (Hanyang U., Seoul, S. Korea), Young Gun Ko (Yeungnam U., S. Korea),
Dong Hyuk Shin (Hanyang U.)
Research on the Characteristics of Dielectric Barrier Discharge and Dielectric Barrier
Corona Discharge Yanzhou SUN, Mi Zeng (Henan Poly U., Jiaozuo, China),
Yan Lu (Henan Coal and Chem. Group, Jiaozuo, China)
Polyoxometalates - Carbon Nanotubes Composites For Electrochemical Capacitors
Tahmina Akter, Gurvinder Bajwa, Keryn LIAN (U. Toronto, Canada) Thurs-Fri
Synthesis And Characterization of GaAs Nanowires On Amorphous Substrates
Jared J. HOU 1, Ning Han, Fengyun Wang, Alvin T. Hui, Guangcun Shan, Fei Xiu,
Tak F. Hung, Johnny C. Ho (City U., Hong Kong, SAR, China)
Piezoelectric Material Especially Bulk-Type Ceramics And Thin Film Processing Sol-Gel.
Sunny JeongSeon HAN (Korea Polytechnic U., Kyunggi)
Synthesis And Electron Field Emission Studies Of Nanocrystalline Diamond Films
P.K. BARHAI, Rishi Sharma, Vijay Chatterjee (Birla I.T., Ranchi, India),
N. Woehrl, Volker Buck (U. Duisburg-Essen, Germany)
Well-Alingned And Conductive Carbon Nanotube/TiO2 Film For Flexible Photoelectrode
Jiangtao DI, Qingwen Li (Suzhou Inst. Nano-tech & Bio-tech., China)
Fabrication And Characterization Of Pure Single Walled Carbon Nanotubes
Microelectrode For Electrochemical Measurement XuanViet NGUYEN,
Yoshiaki Ukita, Yuzuru Takamura (JAIST, Ishikawa, Japan)
Current Properties Depending on Temperature of Hydrogenated Silicon Oxycarbide
Teresa OH (Cheongju U., S. Korea)
Structural Properties Of Magnetite Films Grown By Pulsed Laser Deposition
Qixin GUO, Kazuki Nakamura, Katsuhiko Saito, Tooru Tanaka, Mitsuhiro Nishio
(Saga U., Japan), Makoto Arita, Yoshifumi Ikoma (Kyushu U., Fukuoda, Japan),
Jian Ding, Di Zhang (Shanghai Jiaotong U., China)
Application Of Quasi-Ternary InAsSbP Compound Semiconductors For The Growth Of
Quantum Size Objects On Inas (100) Substrate Karen GAMBARYAN,
Vladimir Aroutiounian, Vardan Harutyunyan (Yerevan St.U., Armenia), Torsten Boeck,
Jan Schmidtbauer, Roman Bansen (Leibnitz Inst, Berlin, Germany)
Highly Aligned Carbon Nanotube/Polymer Composites With Much Improved Electrical
Conductivities Xuemei SUN, Huisheng Peng (Fudan U., Shanghai, China)
Modulation of Metal-Insulator Transition Temperature in W-doped VO2 Thin Films
Toward Mott Devices Hidefumi TAKAMI, Kenichi Kawatani, Teruo Kanki,
Shigenori Ueda 1, Keisuke Kobayashi1, Hidekazu Tanaka (Osaka U., Japan)
Deposition Of Nanometric SiOxHyCz Films At Different Substrate Temperatures By
Atmospheric Pressure Microwave Plasma Torch (Tia):First Steps Towards Self-
Assembled 3-Dimensional Nano-Sensors Xavier LANDREAU, Briac Lanfant,
Thérese Merle, Guillaume Bouscarrat, Zakaria Bouchkour, Christelle Dublanche-Tixier,
Pascal Tristant (U. Limoges, France)
Influence Of The V/Iii Ratio On The Growth Of Group Iii Nitride Quantum Dots
Deposited On Silicon Substrate By Plasma Enhanced Chemical Vapor Deposition
Zakaria BOUCHKOUR, Pascal Tristant, Christelle Dublanche-Tixier, Cedric Jaoul,
Xavier Landreau (U. Limoges, France), Elsa Thune, René Guinebretiere (CEC,
Limoges, France)
Ultraviolet Photodetectors Made By Bridging Wide Bandgap Semiconductor Nanowires
Yanbo LI. Jean-Jacques Delaunay (U. Tokyo, Japan)
Grown Ambient Effect In Gan Crystalline Quality On Si(111) By MOVPE
Bablu K. GHOSH (U. Malaysia-Sabah), Akio Yamamoto (Fukui U., Japan)
Effect Of Modified-Montmorillonite And Poss On Electrical Properties Of Solid Polymer
Elecrolytes Keun-Byoung YOON (Kyungpook Nat U., Daegu, S. Korea),
Dong-ho Lee (Dongyang Mirae U., Seoul, S. Korea)
Time-Integrated And-Resolved Mass Spectrometric Investigations During Laser Ablation
Of Yttrium In High Vacuum Alessio PERRONE, F. Gontad, A. Lorusso
(U. Salento, Italy)
Alternative Support Materials And The Role Of The Support Morphology For The
Electrode Structure S. Zils, P. Bleith, F. Ettingshausen, J. Suffner (TU Darmstadt,
, A. Wolz, M. Michel (Esch-sur-Alzette, Luxembourg), Christina ROTH
(TU Darmstadt, Germany)
Potential-Dependent Band Gap of Polypyrrole Composite
Mahnaz M.ABDI, Luqman Chuah Abdullah (U. Putra Malaysia, Selangor),
H.N.M. Ekramul Mahmud (U. Malaya, Kuala Lumpur), Anuar Kassim,
Mohamad Zaki Ab. Rahman (U. Putra Malaysia)
Nanostructured Mg Thin Films On Cu Substrates For Photocathode Applications
Carmen RISTOSCU, Ion N. Mihailescu (Magurele, Ilfov, Romania(
On The Suitability Of Some Cr-Based Chalcogenides And Pnictides As Spintronic
Materials - Density Functional Results Yong LIU (Yanshan U., Qinhuangdao, Hebei,
China), Shyamal K. Bose (Brock U., St. Catherines, Canada), J. Kudrnovsky (ASCR,
Prague, Czech Rep.)
Magnetism of Quaternary Heusler Alloys: (Cu,Ni)2MnSn as a Case Study
Shyamal K. BOSE (Brock U., St. Catharines, Ontario, Canada), J. Kudrnovsky,
V. Drchal (Czech Acad Sci, Prague)
Molecular Dynamics Simulation For Ultrathin Lubricant Nanofilms With Nonfunctional
And Functional End Groups B. Li, Chee How WONG (Nanyang T.U., Singapore),
S.K. Yu, W. Hua, W.D. Zhou (Data Storage Inst., Singapore)
Optoelectrical Properties of CdSe-Au Nanorod Networks
Peigang LI, Alexandros Lappas (IESL-FORTH, Heraklion, Greece), Romain Lavieville,
Yang Zhang, Roman Krahne (Italian Inst.Tech., Genoa)
A Giant Dielectric Permittivity of BMNO-Bi Composite Films Grown At Room
Temperature By Radio-Frequency Sputtering Hyun-June Jung, Hyun-Ah Song,
Soon-Gil YOON (Chungnam Nat. U., Daejeon, S. Korea) INVITED 25 min
InGaN-Based MSM Photodetectors With Transparent Ga-Doped ZnO Electrodes
P.C. CHANG (Kun Shan U., Yong-Kang, Tainan), A.N. Tu (Nat. Cheng Kung U.,
Tainan), K.H. Lee (Hsinchu) , C.L. Yu, S.J. Chang (Nat. Cheng Kung U.)
Growth and Micro Waves Characterizations of BST and BST/BZN Hetero Structures Thin
Films Denis Remiens (U. Valenciennes, France), Lihui YANG (Shanghai Inst.
Ceramics, SICCAS, China), F. Ponchel, C. Soyer, J.F. Legier (U. Valenciennes),
G. Wang, X. Dong (SICCAS, China)
Preparation And Properties Of Magnetite–Carbon Nanotube Reinforced Polypropylene-
Natural Rubber Blends Ing KONG, Robert Shanks (RMIT, Melbourne, Australia),
Sahrim Ahmad, Lih-Jiun Yu (UKM, Selangor, Malaysia)
Processing Effect of Injection Molded Nanoparticle/Polymer Composites on Their
Electrical Properties Haihong WU, Tiecheng Li (Henan U.T., Zhengzhou, China),
Aiyun Jiang, Baofeng Zhang (Huanghe Sci.Tech. Univ., China)
Synthesis and Characterization of YBa2Cu3Ox Thin Films Incorporating BaSnO3 Length-
Controlled Nanorods Paolo MELE (Hiroshima U., Japan), K.Matsumoto, Y. Honda,
I. Tanak (Kyushu I.T., Japan), A. Ichinose (CRIEPI), Y. Yoshida, Y. Ichino
(Nagoya U., Japan), R. Kita (Shizuoka U., Japan)
Carbon Naotube Composite Films With Switchable Transparency
Fancheng MENG, Xiaohua Zhang, Geng Xu, Zhenzhong Yong, Hongyuan Chen,
Minghai Chen, Qingwen Li (Suzhou Inst Nanotech & Nanobionic, China), Yuntian Zhu
(N.Carolina St.U., Raleigh)
Phase Transition And Magnetic Properties Of Ferromagnetic Shape Memory
Fe66Pd30Rh4 Alloys Chien-Feng LIN, Jin-Bin Yang (Nat. Kaohsiung First U. Sci
Tech.)
Optical Properties Dependence As Function Of The Temperature In Aln Films Deposited
By PLD Jaime A. PEREZ, H. Riascos (U.T. Pereira, Colombia), J.C. Caicedo
(U. Valle, Cali, Colombia), L. Yate (U. Barcelona, Spain)
Beyond Complementary Metal Oxide Semiconductor (CMOS): Materials and Engineering
Arezki BENFDILA (Univ. M. Mammeri, Algeria)
Structural and Electrical Properties of Tin Selenide Film
Z.A. Talib, J.Y.C. Liew, W.M.M. Yunus, Z. ZAINAL, S.A. Halim
(U. Putra Malaysia, Selangor)
Biomaterial Aisi 316l Ss Surface Film Analyses After Electropolishing Treatments Under
Varied Magnetic Fields Tadeusz HRYNIEWICZ, K. Rokosz (Koszalin, Poland)
Resistivity/Conductivity of Inorganic Oxides by Optical Interferometry Techniques
Khaled HABIB, Amer Al-Arbeed (KSIR, Safat, Kuwait)
Synthesis Of Cobalt/Gold Bimetallic Hollow Microspheres And Its Optical Properties
Cheng-Seong KHE, Azizan Aziz, Zainovia Lockman (U. Sains Malaysia, Penang)
Combination of Micro-Fluidics and Sol-Gel Templating for Nanostructuring of Titania
Thin Films for Photovoltaic Application Monika RAWOLLE, Matthias A. Ruderer,
Stefan M. Prams, Qi Zhong, David Magerl (TU Muenchen, Germany), Jan Perlich,
Stephan V. Roth (HASYLAB at DESY, Hamburg), Philipp Lellig (MPI-P, Mainz),
Jochen S. Gutmann (U. Duisburg-Essen), Peter Müller-Buschbaum (TU Muenchen)
Nitrogen or Oxygen Bonds Passivating on Surface of Si Quantum Dots Formed by
Nanosecond Pulse Laser Wei-Qi HUANG (Guizhou U., Guiyang, China),
Shi-Rong Liu (CAS, Guiyang, China), Quan Lü (Guizhou U.), Chao-Jian Qin
(CAS, Guiyang)
Enhanced Optical Transparency In 3D Nanostructured Films
Bernardo S. MENDOZA (CIO-Mexico), W. Luis Moch´an (ICF-UNAM-Mexico),
Guillermo P. Ortiz (Univ. Nac. del Nordeste, Argentina)
Sol-Gel Templated Titaniumdioxide Films for Solar Cell Applications
Peter MUELLER-Buschbaum, Monika Rawolle, Martin A. Niedermeier, Kuhu Sarkar,
Philipp Lellig (Max-Planck, Mainz, Germany), Jochen S. Gutmann (U. Duisburg-Essen)
Theory Of Electrostatic Interaction Between Polymer-Coated Composte Particles
Hiroyuki OHSHIMA (Tokyo U. Sci, Japan)
Physicotechnological Peculiarities Creating A New Class Of Piezoelectric Materials Based
On The Hybrid Of Matrix Nano- And Micropiezoelectric Composites
M.K. Kerimov, M.A. Kurbanov, A.A. BAYRAMOV, I.S. Sultanakhmedova,
F.N. Tatardar, A.A. Mextili, G.Ch. Gulieva, I.N. Orudjev (Nat. Acad. Sci, Azerbaijan)
Expansion Of The Ferroelectric Phase Temperature Interval In The Composites
(KNO3)1-x (BaTiO3)x and (KNO3)1-x(PbTiO3)x
Elena V. STUKOVA, S.V. Baryshnikov (Amur St. U., Russia) POSTER
Electromechanical Properties Of Polyether-Based Polyurethane Composites Filled With
Functionalized Multi-Walled Carbon Nanotubes K. Wongtimnoi,
Benoit GUIFFARD, A. Bogner–Van de Moortele, L. Seveyrat, J.-Y. Cavaille
(INSA-Lyon, France) POSTER
MATHEMATICAL MODELING (Engineering Mechanics)
Application Of Indentation Fracture Mechanics Approach For Determination Of Fracture
Toughness of DLC Coating Ceramics Materials Yan-rong WANG,
Sheikh-Md. Rasel, Hyoun-kon Ku, Jung-il Song (Changwon N.U., S. Korea)
Structural Analysis of Steam Surface Condenser
Jian-Guang ZHAI (Changwon Nat.U., S. Korea), Jong-Rae Cho (Korea Maritime U.,
Busan), Hua-Hou (North U. of China, Taiyuan, China), Yan-Rong Wang, Jung-Il Song
(Changwon N.U.)
Nonlinear Static Analysis Of A Beam Made Of Functionally Graded Materials
Julien Thivend, Habib Eslami, Yi ZHAO (Embry-Riddle Aero U., Daytona Beach, FL)
Stress Relaxation Of Impact Damaged Composites
Yuanjian Tong (Swansea U., UK, & Beijing U.Chem.Tech.), David H Isaac
(Swansea U.)
Contacts In Ceramic-Carbon Nanocomposites
Peter ARATO (Budapest, Hungary)
Strategies For Improving Ductility Of Bulk Nanostructured Materials
Yonghao ZHAO (U. Shanghai Sci &Tech., UC Davis, Calif.)
Evaluation the Preferred Particle Geometry for Dental Composite Using the Inverse
Damage Strength Analysis Approach Y.P. CHAN, C.Y. Tang
(Hong Kong Poly U., China)
Numerical Method for Calculating Load Distribution in Multi-Bolt Thick Laminate Joints
W.X. Liu, Longquan LIU, R. Wei (Shanghai Jiaotong U., China)
Response Of Beam Due To Impact Load
CheeSiang CHONG, Kameswara Rao N.S.V. (U. Malaysia Sabah)
Free Vibration of Composite Plates Subjected to Magnetic Field and Temperature
Gradient Ohseop SONG, Sung-Kyun Kim, Jong-Woon Choi, Young-Jun Kim,
Sang-Yun Park (Chungnam N.U., Daejeon, S. Korea)
Using Taguchi Method To Improve Composite Materials Learning – MSU Example
Guanghsu A. CHANG (Minnesota St.U., Mankato)
Fluid-Structure Interaction Analysis Of Pulsatile Flow In A Layered Anisotropic Aortic
Wall Ying LIU, Shuai Yang (Beijing Jiaotong U., China)
Analysis of Micromechanical Behavior in Short Fiber Composites
HongGun KIM, Lee Ku Kwac, Seung Gyu Oh, Tae Hoon Kim, Bophang Sorn,
Hee Jae Shin (Jeonju U., S. Korea), Chai Young Lim, Ki Hyun Yoo, Jeong Sang Song,
Yong Hong (Chonbuk, S. Korea)
Delamination Detection In Composite Laminates By Ultrasonic Guided Wave
Yue LIANG (Penn St.U.), Fei Yan (FBS, St.Coll., PA), Cody Borigo, Joseph. L. Rose
(Penn St.U.)
Effect Of Porosity On The Mechanical Properties Of YSZ/NiO Composite Anode Materials
Dan JIA, Aixi Zhou (U. North Carolina-Charlotte),Yang Ling, Ke An, A.D. Stoica,
Xun-Li Wang (Oak Ridge N.L., TN)
Mechanical Characterization And Finite Element Modeling Of NBR And PDM For
Directional Drilling Henry K. GONZALEZ, Jianren Zhou, Shield Lin
(Prairie View A&M U., TX)
Shape, Displacement And Strain Measurements By Sampling Moire Method
Yoshiharu MORIMOTO (moire Inst. Osaka, Japan), Motoharu Fujigaki, Akihiro Masaya
(Wakayama U., Japan)
Free Vibration Analysis Of Grid Stiffened Composite Cylindrical Shells
Milad HEMMATNEZHAD, Hossein Rahimi (Tarbiat Modares U., Iran)
Thermal Stability Analysis Of Tapered Fgm Annular Plates Under Nonuniform
Temperature Distribution- A Finite Element Approach
Mansour Mohieddin Ghomshei, Vahid Abbasi (Islamic Azad U., Iran)
Effect Of The Microstructure On The Properties Of Ceramic–Elastomer Composites With
3D Connectivity Of Phases Anna BOCZKOWSKA (Warsaw U.T., Poland)
In-Plane Dynamic Displacement Measurement Using A Pointwise Fiber Bragg Grating
Sensing System Kuo-Chih CHUANG (Zhejiang U., Hangzhou, China),
Chien-Ching Ma (Nat. Taiwan U., Teipei) Mon-Tues
Thermomagnetoelastic Behavior Of A Rotating Functionally Graded Hollow Cylinder
Zengtao CHEN, A. Hamid Akbarzadeh (U. New Brunswick, Canada)
Precipitation In Alloys: A Kinetic Monte Carlo And Class Model Study
David BOMBAC, Goran Kugler (U. Ljubljana, Slovenia)
Modeling And Analysis Of Dynamic Crack Propagation In A Nanoscale Bi-Layer Metallic
Composite Ram Mohan, Yojna Purohit (NCAT, Greensboro, NC)
Buckling And Postbuckling Behavior Of Laminated Stringer Stiffened Composite
Cylindrical Panels Haim ABRAMOVICH (Technion, Israel)
Searching for the Optimum Conditions of NLC-Sunscreen Formulae by Using Taguchi’s
Method Pao-Chi CHEN, H.C. Chen, J.W. Huang (Lunghwa U.Sci.Tech., Taoyuan),
J. Pang (Taiwan AC Sci. Inc., Taoyuang)
Monte Carlo Simulation Of Defects In Hard-Sphere Crystal Grown On A Squsre Pattern
Atsushi MORI, Yoshihisa Suzuki, Shigeki Matsuo (U. Tokushima, Japan)
Characterization Of Fluid Dynamic Properties Of Schwarz’s Primitive Cellular Materials
Che-Cheng Chang, Shewei ZHOU, Yuhang Chen, Qing Li (U. Sydney, Australia)
Prediction of Mechanical and Barrier Properties of Chlorobutyl Rubber/Natural Rubber
Blend using Artificial Neural Networks Lin LI, Jin Zhang, Z X Zhang, Jin Kuk Kim
(Gyeongsang Nat. U., S. Korea)
On Particle Impact Induced Bond Breaking Of Single-Walled Carbon Nanotubes
Puroorava Chakravarthy, Gang LI (Clemson U., SC)
Nonlinear Thermo-Mechanical Responses Of Smart Skin Sturctures
Kwang-Kyu YOO, Ji-Hwan Kim (Seoul Nat.U., S. Korea) Mon-Tues
Hygrothermal Effects On The Structural Behaviors Of Functionally Graded Plates
Chang-Yull LEE, Ji-Hwan Kim (Seoul N.U., S.Korea) Mon-Tues
Identifying Material Properties Of Composite Materials From Vibration Data
Zubaidah Ismail (U. Malaya, Kuala Lumpur), Henry Khov, Wen L. LI
(Wayne St.U., Detroit, MI)
Divergence Of Composite Aircraft Wings Accounting The Aerodynamic Finite-Span Effect
Yan HONG, Zhanming Qin (Xi’an Jiaotong U., China)
Nonlinear Dynamics And Vibrations For Geometrically Nonlinear Composite Aircraft
Wings Ji-seok SONG, Hwanhee Lee, Seog-Ju Cha, Sungsoo Na (U. Korea, Seoul),
Zhanming Qin (Xi’an Jiaotong U., China)
Internal Resonance Of Composite Sandwich Panels With Transversely Compressible Core
Yizhe FENG, Zhanming Qin, Guiping Zhao (Xi’an Jiaotong U., China)
Study on Algorithm of Adaptive Path Planning for Automated Placement on Mesh
Surface Wenlei XIONG, Wang Xianfeng, Xiao Jun (NUAA, Nanjing, China)
Numerical Study Of Scale Effects On The Delamination Of Laminates Under Low-Velocity
Impact Yajun Chen, Zhefeng YU, Hai Wang (Shanghai Jiaotong U., China)
Optimization Of Drilling Conditions Of Glass Fibre Reinforced Plastic Composite Material
Using Genetic Algorithm N.S. MOHAN, Jagannath K, S.S. Sharma,
Chandrashekar Bhat (Manipal Inst.Tech., India)
Performance of Thin Walled Composite Beams with Stochastic Properties under Matrix
Cracking Damage Babruvahan P. RONGE, Prashant M. Pawar (Pandharpur, India)
Fuzzy Logic based Matrix Crack Detection in Thin-walled Composite Beam under
Material and Fabrication Uncertainties Prashant M. PAWAR, Babruvahan P. Ronge
(Pandharpur, India)
The Study On A Numerical Controlled Multi-PinsInserting System For Z-Pinned
Composite Laminates Preparation Liping.DING, Junwei.Qi, Biao.Yan, Jun.Xiao,
Liwei.Wen (NUAA, Nanjing, China)
Mathematical Modeling For Single-Walled Carbon Nanotubes (SWCNTs) Based On
Magneto-Electro-Elastic Beam Model Mei-Feng LIU, Tai-Ping Chang
(I-Shou U., Kaohsiung)
The Influence Of Incorporation Of Pulp And Paper Mill Secondary Sludge In Urea-
Formaldehyde Resin On Mechanical And Physical Properties Of Particleboard
Panels Suying XING, Bernard Riedl (U. Laval, Canada), Amed Koubaa
(U. Quebec, Canada), James Deng (FPInnovations, Quebec, Canada)
Evaluation Of Stress Field For An Elliptical Inhomogeneity With Imperfect Interface In
Anisotropic Media C.K. CHAN (Hong Kong Poly U., China), Z.Q. Huang, G.H. Nie
(Tongji U., Shanghai, China)
Effects Of Cutout Shapes On Postbuckling Response Of Quasi-Isotropic Laminate Under
Combined In-Plane Loads Dinesh KUMAR, S.B. Singh (Birla I.T.,and Sci., India)
Mon-Tues
A Semidefinite Harmonic Oscillator For Seismic Analysis Of Structures In A Complex
Space. A Physical And Mathematical Shake Table J. L. URRUTIA-Galicia
(UNAM, Mexico D.F.)
Multi-Sphere Models Of Particles In Discrete Element Simulations
Rimantas KACIANAUSKAS, Darius Markauskas (Vilnius Gediminas T.U.,
Lithuania)
Research Of Nanostructural Tool Materials Servosurfaces
A.S. SYROMYATNIKOVA, M.N. Safonova, A.A. Fedotov A.A (Yakutsk, Russia)
Development Of Methods Of Severe Plastic Deformation And Research Methods Of
Ultrafine Steels N.D. PETROVA, A.M. Ivanov, Eu S. Lukin (Yakutsk, Russia)
Use Of Ultradisperse Modifiers For Production Of Wear Resistant Powder Coatings And
Materials M.Z. BORISOVA, G.G. Vinokurov, N.F. Struchkov, M.I. Vasileva
(Yakutsk, Russia)
Multiscale Modeling Of Deformation Processes In Situ
Valeriy V. LEPOV (Yakutsk, Russia), Boris A. Loginov (Moscow Inst Electronics,
Russia)
Study Of Dynamic Drop Impact Response Of Open-Cell Metal Foam
Yishi SU, Xiaolu Gong (U.T. Troyes, France)
Creep-Buckling Failure Of Open-Cell Foams Under Uniaxial Compression
Ting-Jung Chen, Jong-Shin HUANG (Nat. Cheng Kung U., Tainan)
New Statistical Functional Nonparametric Methods For Study Of Nanomaterials
Salvador NAYA, Ramon Artiaga, Mario Francisco-Fernandez, Javier Tarrío-Saavedra,
Jorge López-Beceiro (U. Coruna, Ferrol, Spain)
Flexural, Shear And Compressive Properties Of Bioresorbable PLA-PBG Fibre Reinforced
Composite Intramedullary Rods R.M. Felfel (Mansoura U., Egypt), I. Ahmed,
A.J. Parsons, G.S. Walker, C.D. RUDD (U. Nottingham, UK)
Preparation And Microstructural Characterization Of Carbon /Carbon Composite
Ramani VENUGOPALAN, D. Sathiyamoorthy, A.K. Tyagi (Mumbai, India)
The Interaction Between A Screw Dislocation And A Semi-Infinite Wedge Crack With A
Nano Circular Inclusion At Tip Hao-Peng SONG. Cun-Fa Gao (NUAA, Nanjing,
China)
A Study on Improvement of Laminate Structures Subjected to Low-Velocity Impact
Guang-Min LUO (Nat. Kaohsiung Marine U., Kaohsiung)
Special Interface Design For Adhesion Improvement
Renate MIX, Huajie Yin, Joerg Friedrich (BAM, Berlin, Germany)
A Cellular Automata Simulation For The Tension Behavior Of Carbon Nanotubes
X.H. Huang, X.Q. HE (City U., Hong Kong, China)
Thermal Radiation Characteristics Of Silicon Inverse Opal In Mid Infrared Range
Jing XU, Yujie Li, Rongsheng Liu, Kai Xie (Nat. U. Def.Tech., Changsha, China)
Dynamic Response Analysis of Shear Deformable Laminated Beam with the Method of
Reverberation Ray Matrix F.X. Miao (Ningbo U., China), Guojun SUN
(Shanghai Jiaotong U., China)
Tensile And Fracture Behaviour Of Die-Drawn Polypropylene-Clay Nanocomposites
Abdullhadi ALSHEHRI (SABIC, Riyadh, S. Arabia), J. Sweeney, P. Caton-Rose,
P.D. Coates (Bradford U.,UK)
Functional Stability Of SMP Based Syntactic Foam
Samuel I. IBEKWE (Southern U. Baton Rouge, LA), Tao Xu (Southern U. Nanjing,
China), Guoqiang Li (S.U. Baton Rouge, and L.S.U.)
Design Of Experiments For Improving The Tensile Strength Of Rapid Prototyping
Polymer Materials James Clements, Rafiq NOORANI (Loyola Marymount U.,
Los Angeles, Calif.)
Mechanical Behavior Of Carbon Nano-Crystallites Forming Carbon Fibers
Melanie TODT, Franz G. Rammerstorfer (Vienna U.T., Austria), Oskar Paris,
Franz D. Fischer (Leoben, Austria)
Interface Fracture Mechanics Of Nanoscale Components On A Substrate
Hiroyuki HIRAKATA, Taku Nishihira, Akio Yonezu, Kohji Minoshima (Osaka U.,
Japan)
Mechanical Behavior Of Metallic Nanowires Containing Vacancy Cluster Defects
Pei-Hsing HUANG, Lay Gaik Teoh, Yu-Ren Wu, Ming-Yue Huang, Hong-Yi Li
(Nat. Pingtung U. Sci Tech., Neipu)
Modeling Of Ecological Plastic Lubricant Flow
Martin VASINA (Tomas Bata U., Zlin, Czech Rep.), Lumír Hruzík (TU Ostrava,
Czech Rep.)
Compression Fatigue After Impact Testing Of Thermosetting Composites
Volker ALTSTAEDT, Manuel Kempf, Sebastian Schwaegele (U. Bayreuth, Germany),
Andreas Ferencz (Henkel AG, Duesseldorf, Germany)
The Thermal Problem of Functionally Graded Material Substrate-Coating Structure
Lifang GUO (Shanghai Jiaotong U., China),. Xing Li (Ningxia U., Yingchuan, China)
Application Of Hilbert-Huang Transform To The Signal Analysis Of Sonic Echo Testing
Sheng-Huoo NI, Li-Ting Hsu (Nat. Cheng-Kung U., Tainan)
Effect Of Porosity On Impact Strength Of Vitrified Bond Diamend Wheels
Yong-gai Hou, Fu-ren XIAO, Gui-ying Qiao (Yanshan U., Qinhuangdao, China),
Wen-jun Zou (Henan U.T., Zhengshou, China), Bo Liao (Yanshan U., China)
Applicability Of Gibbs Adsorption Equation To Deformed Solid Surfaces
Emmanuel M. GUTMAN (Ben-Gurion U. Negev, Israel)
A Boundary Perturbation Analysis For A Multilayer Film Coating
Sergey A. KOSTYRKO, M.A. Grekov (St. Petersburg State U., Russia)
Exact Solution Of Edge-Bending Buckling Of Rectangular Orthotropic Plates
Shyh-Rong KUO (Nat. Taiwan Ocean U., Keelung), J.D. Yau (Tamkang U., Taipei)
Magneto-Elastic Response Of Rectangular Orthotropic Plates Due To Multi-Lane
Moving Loads Jong-Dar YAU (Tamkang U., Taipei)
BGA Impact Analysis: Numerical Study
Rasha M. Soliman, Medhat Awad El-Hadek, Shaban Ibrahim ABDOU (Port-Said U.,
Egypt)
On Different Projectile Nose Shapes in Soil And Foam Penetration
Ce XU, Fenghui Wang, Shaoming Wang, Tiejun Liu (Northwestern Polytech.U.,
Xi’an, China)
The Frictional Effects In Harmonic Circuit
Carmen BAL, Carmen Ioana Iuhos, Nicolae Bal (TU Cluj Napoca, Romania)
The Blind Hole Influence In The Residual Stresses Determination
Nicolae BAL, Carmen Ioana Iuhos, Carmen Bal (TU Cluj Napoca, Romania)
An Effective Flaw Model On Analyzing Nanofiller Agglomeration In Nanocomposite
Materials L. Roy XU, Arun Krishnan (U. Texas-El Paso) Mon-Tues
Maximum Amplitude of Solutions on a Ball for a Generalized Lane-Emden Equation
Abeer YASIN (U. Western Ontario, Canada)
Optimal Vibration Control of Smart Fibre Reinforced Polymer Spherical Shells
Debabrata CHAKRABORTY, Tarapada Roy (Indian Inst. Tech. Guwahati)
A Numerical Method for Studying Thermal Deformation in 3D Double-Layered Thin
Films with Imperfect Interfacial Thermal Contact Exposed to Ultrashort-Pulsed
Lasers Runzhou Liu, Weizhong DAI (Louisiana Tech. U., Ruston)
Numerical Analysis of a Transversal Crack in a Steel Slab
Frantisek KAVICKA, Jana Dobrovska, Karel Stransky, Bohumil Sekanina, Josef Stetina
(Brno U.T., Czech Rep.)
Delamination Analysis At Free Edges Of Composite Laminates
Bosko RASUO. Mirko Dinulovic (U. Belgrade, Serbia)
Effect Of Poisson’s Ratio On Flexibility Of Smooth Orthotropic Pipe Bend
K. M. GUPTA (Motilal Nehru Nat.Inst.Tech., India)
Load-Displacement Behaviour of AA 7075-T6 Holed And Clamped Plates At Different
Environmental Temperatures R.H. OSKOUEI, Joe Elambasseril, R.N. Ibrahim
(Monash U., Clayton, Australia)
Tensile Strength of Pandanus Odoratissimus Fibers Reinforced Unsaturated Polyester
Composite Hairul ABRAL, Heri Andriyanto, Ilhamdi (U. Andalas, Indonesia)
Meshless Methods For The Quasi-3d Analysis Of Functionally Graded Elastic Cylinders
Chih-Ping Wu, Shih-Wei Yang (Nat. Cheng Kung U., Tainan)
Modeling Of Creep Behaviour Of A Composite Material
Ahmed KOUADRI-Boudjelthia (Chlef, Algeria), A. Bouabdallah (Algiers, Agleria),
M. Tahar Abbes (Chlef, Algeria)
Degradation Measurement Of Fibrous Reinforcement Inside Composite Material
Marie Lefebvre, Francois BOUSSU, Daniel Coutellier (U. Lille Nord de France)
A Model For Nanomechanical Behaviours Of Microcantilever-Based Single-Stranded Dna
Chips Induced By Conformational Entropy Neng-Hui ZHANG, Zou-Qing Tan,
Jin-Ying Shan (Shanghai U., China)
Nonlinear Modeling And Optimization Of Parameters For Viscoelastic Composites An
Nanocomposites Brian Dandurand, Irina VIKTOROVA (Clemson U., SC),
Sofia Alexeeva (Moscow, Russia)
Matrix Analysis Of Structural Composite Laminates
Mahiuddin CHOWDHURY (U. New South Wales, Sydney, Australia)
poster display, not attending
METALS ENGINEERING (MMC)
Structure Of Al87Ni8Dy5 In Amorphous And Nanocrystalline State
S.I, Mudry, Yu.O. Kulyk (Nat. U. Lviv, Ukraine)
Mechanical Properties Of Hot Corrosion Tested APS And EB-PVD Multilayer Thermal
Barrier Coatings Using Nano Indentation Ravinder M. DIWAN, Patrick F. Mensah,
Naresh Polasa (Southern U., Baton Rouge, LA), Douglas E. Wolfe (Penn St.U.)
Coupled Metal Nanoparticles with Enhanced Optical Properties and Their Applications
Zhenping Guan, Polavarapu Lakshminarayana, Cuifeng Jiang, Qing-Hua XU (Nat. U.
Singapore)
Mechanical and Microstructural Analyses of Cu-15at% Ag Nanocomposite Processed By
High Pressure Torsioning KiHwan OH, HoByung Kim, SunIg Hong*
Nanotubes Formation on Ti-6Al-4V and Zr-1Nb Alloys Through Anodization And Its
Biomineralization Analysis Ju-Young JIN, A.J. Nathanael, S.I. Hong
Effect Of Heat Treatment On The Mechanical Response And Fracture Behavior In STS304/Al1050/STS439 Clad Material Jun-Young SONG, In-Kyu Kim,
Sun Ig Hong
Effect Of Alloying On The Deformation Behavior And Slip Mode Of Cu-16at%Al Single
Crystals At Various Temperatures JongSu HA, SunIg Hong (Cheungnam Nat. U.,
Daejeon, S. Korea)
Effect of Interfacial Reaction Layer On The Cracking Behavior in 3-ply Mg/Al/STS Clad-
Metal In-Kyu KIM, Jun-Young Song, SunIg Hong (Cheungnam Nat. U., Daejeon,
S. Korea)
Microstucture and Mechanical properties of Cu-Ni-Zn/Cu-Cr/Cu-Ni-Zn Processed by
HPT (High Pressure Torsioning) Ho-byung KIM, Ki-Hwan Oh, Sun Ig Hong
(Cheungnam Nat. U., Daejeon, S. Korea)
Oxidation and Mechanical Properties of Zr-1Nb-1Sn-0.1Fe Alloys At High Temperatures
EunKyu LEE, JongMin Lee, SunIg Hong (Cheungnam Nat. U., Daejeon, S. Korea)
Control Of Structure And Properties Of Welded Connections Of Medium Alloy Steels By
Application Highly Concentrated Pulse Energy Actions A.A. DEMYANCHENKO,
Yu N. Saraev (RAS, Tomsk, Russia)
Adaptive Pulse Technological Processes Of Welding And Pad Weld Is A New High-
Performance Method Of Obtaining Of Permanent Joints Of High-Strength Steels
Yu N. SARAEV (RAS, Tomsk, Russia)
The Improvement Of Oxidation Behavior Of Powder Metallurgy Made Fe-Cr Alloys
Yen-Ting Liu, Shuang-Shii LIAN (Nat. Taiwan U., Taipei), Wei-Ja Shong, R.Y. Lee
(INER, Taoyuan)
Oxidation Behaviour Of Ion-Implanted Nanocrystalline Fe-Cr Alloy Fabricated By
Different Densification Techniques: Spark Plasma Sintering And Hot-Pressing
Darwin SEBAYANG, Deni S. Khaerudini, H. Saryanto, M.A. Othman, S. Hasan
(UTHM, Johor, Malaysia), D. Fredrick (Santa Rosa, Calif.), T. Sujitno, P. Untoro
(Banten, Indonesia)
Structure And Hardness Of Copper-Doped Soda-Lime Silica Glass
Maria SUSZYNSKA (PAS, Wroclaw, Poland), Agnieszka Cizman (Univ.Tech.,
Wroclaw, Poland)
Mechanical Suppression Of Tunneling Between Metallic Beads
Aymen TEKAYA, R. Bouzerar (U. Picardie Amiens, France), V. Bourny (U. Picardie)
Thermal Fatigue Behavior And Cracking Characteristics Of Indefinite Chill Iron Rolls
Peter FAJFAR, Milan Tercelj, Matevz Fazarinc (U. Ljubljana, Slovenia), Borut Zuzek
(Inst.Metals Tech., Ljubljana)
Mechanical Properties Of Particle Reinforced Magnesium Composites SiCp/AZ80 Song-Jeng HUANG, Chi-Rung Li, Kai-Lun Yan (Nat. Chung Cheng U., Chia-Yi)
Laser Cladding Of Cu0.5 NiAlCoCrFeSi High Entropy Alloy On AZ91D Magnesium
Substrates T.M. YUE, K.J. Huang (Hong Kong Poly U., SAR, China)
The Improvement of Oxidation Behavior of Powder Metallurgy Made Fe-Cr Alloys
Yen-Ting LIU, Shuang-Shii Lian (Nat. Taiwan U., Taipei), Wei-Ja Shong, R.Y. Lee
(Inst. Nuclear Energ Res.)
A Comparative Study Of Corrosion Resistance On Metal Joint By Using Different Types
Of Cooling Method W.B. Wan NIK (U. Malaysia Terengganu), R. Rosliza (TATI U.
Coll., Kemaman) , O. Sulaiman (U. Malaysia Terengganu), Y. Prawoto (U.Teknologi
Malaysia), M.F.R. Zulkifli (U. Malaysia Terengganu), David Hui (U. New Orleans)
Microstructure And Room Temperature Mechanical Properties Of NiAl-Cr(Mo)-Hf/Dy
Eutectic Alloy Prepared By Injection Casting L.Y. SHENG, T.F. Xi
(Peking U., China), J.T. Guo (IMR, Shenyang, China), Y.F. Zheng (Peking U.),
H.Q. Ye (IMR, Shenyang)
A Analysis Of The Transverse Strength Of Ti-Based Matrix Composite Reinforced By SiC
Fiber Bing ZHAO, HongLiang Hou, JinHua Liao, Bo Jiang (Beijing Aero. Manuf.
Res.Inst., China)
Strength And Magnetism Of Nanocomposites Formed By 3d-Metal Nanochains Embedded
In A Non-Magnetic Matrix Mojmir SOB (Masaryk U., Brno, Czech Rep.), T. Kana
(ASCR, Czech Rep.)
Further Development Of Oxide Dispersion Hardened Platinum Alloyswith Improved
Strength At High Temperatures Bernd FISCHER (U. Applied Sciences, Jena,
Germany), Uwe Jantsch, Michael Koch (Hanau, Germany)
Strengthen Mechanism Of In Situ TiB/TiC Reinforced Ti 1100 Composites And Finite
Element Analysis Fei ZHAO (Shanghai Jiaotong U., China), Xiaolu Gong
(UT Troyes, France), Di Zhang (Shanghai Jiaotong U.)
A Novel Discharge Technique For Noble.Metal Nanoparticles
Xiulan HU, Osamu Takai, Nagahiro Saito (Nagoya U., Japan)
Evolution Of Goss Orientation During Rapid Heating For Primary Recrystallization In
Grain-Oriented Electrical Steel Eun-Jin LEE, Sung-Ji Choi, No-Jin Park
(Kumoh Nat. I.T., Gumi, S. Korea)
Effects Of Initial Microstructure On The Development Of Microstructure And Mechanical
Properties In Energy Saving AZ31 Magnesium Alloy During Hot Rolling
No-Jin PARK, Sun-Hea Hwang and Chang-Wan Ha (Kumoh Nat. I.T., Gumi, S. Korea)
Volatile Organic Compound Gas Sensor Based On Meso-/Macro Porous Semiconducting
Metal Oxide Duc Hoa NGUYEN, Sherif A. El-Safty (NIMS, Ibaraki, Japan) chair
Stir Casting Technique For Low Melting Point Metal Matrix Composites And
Characteristic Study K. JAGANNATH, S.S. Sharma, N.S. Mohan, P.R. Prabhu
(Manipal, India)
The Effect of Particle Shape on the Mechanical Properties of Particle Reinforced Metal
Matrix Composites: 2D Model Approach K.K.S. MER (G.B.P.E.C., Uttarakhand,
India), B.K. Mishra, S. Ray (Indian Inst.Tech., Roorkee)
Thermomechanical Structuring Of Steel For Fabrication Of Ultrafine Grained Or
Nanocrystalline Materials Maria Z. BORISOVA, S.P. Yakovleva, S.N. Makharova
(Yakutsk, Russia)
Mechanical Properties of Al-Cy-Mg Alloys Micro-Alloyed with Sn
P.S. ROBI, A. Srinivasana, Sanjib Banerjee (Indian I.T., Guwahati)
Characteristics of CrAlSiN Coatings With Post-Deposition Annealing Treatment
Wei-Yu HO, Chi-Wei Chen, Chia-Hang Tsai, Da-Yung Wang (MingDao U., ChangHua)
Residual Stress Measurement On 2024 Aluminum With Different SMAT Treatments
Hao JIANG, Ka Po Cheung, Limin Zhou (Hong Kong Poly U., China), Jian Lu
(City U., Hong Kong, China)
Metal-Metal Bonding Process Using Copper Nanoparticles
Yoshio KOBAYASHI, Satoshi Ishida, Kazuaki Ihara (Ibaraki U., Japan),
Yusuke Yasuda, Toshiaki Morita (Hitachi Ltd, Japan) Wed-Fri
Study Of Cooling Rate Effect On Back-Diffusion During Solidification Of Continuously
Cast Steel Billet Jana DOBROVSKA (TU Ostrava, Czech Rep.), Frantisek Kavicka
(Brno U.T., Czech Rep.), Hana Francova, Věra Dobrovska (TU Ostrava)
Phase Separation Related To Medium Range Order In Crystallization of Al83Ni8Si2Ce7
Metallic Glass Shenghai WANG, C.C. Yang (Hebei U. Engineering, Handan, China)
Core-Shell Structure And Mechanical Behavior Of A New Type Of Iron-Containing
Titanium/Hydroxyapatite Composites Q. Chang, Daolun CHEN (Ryerson U.,
Toronto, Canada), H.Q. Ru, X.Y. Yue, L. Yu, C.P. Zhang (Northeastern U., China)
Mon-Wed
Effects Of Electro-Discharge Machining Parameters On Surface Integrity Of Aluminium
Composite A.M. ABDUL-RANI, A. Mouangue Nanimina (U.T. Petronas, Perak,
Malaysia)
Improvements In Wear Properties Of Ti-6Al-4v Alloy By Thermal Oxidation Process
Sarala UPADHYA, B.K. Muralidhara (U. Visvesvaraya Coll. Engrg., Bangalore, India)
POSTER
NANO COMPOSITES
Glass Transition Temperature And Structural Relaxation Of Polymer Nanoparticles
Under Soft And Hard Confinement Yunlong GUO, Chuan Zhang, Christine Lai,
Rodney Priestley (Princeton U., NJ)
Carbon Nano Coil Synthesized On Zero-Dimensional Silica
Huy-Zu CHENG, Chang-Cheng Su, Tin-You Chen, Guo-Ju Chen, Kuo-Jung Lee
(I-Shou U., Kaohsiung)
Processing and Characterisation of a Polyamide 12-Carbon Nanotube Composite by Laser
Sintering Jiaming BAI, Ruth Goodridge, Richard Hague, Mo Song (Loughborough U.,
UK)
Optical Properties of Silica Opal Templates in the Visible and Infrared
Mark AUSLENDER, Shlomo Hava (Ben-Gurion U., Israel)
Sol Gel Derived Bioactive Glass Nanoparticles in the SiO2-CaO-MgO-P2O5 System
M.R. SAERI, A. Doostmohammadi (Shahrekord U., Iran)
Atomic Layer Deposition and Template Replication for Nanotechnology Engineering
Diefeng GU, Gon Namkoong, Helmut Baumgart (Old Dominion U., Norfolk, VA)
Comparing The Effect Of Nano-CaCO3 And Nano-ZnO On Rheological Properties Of
Polypropylene Using Several Models Hassan EBADI-Dehaghani (Islamic Azad U.,
Iran)
Multifunctional and Specific Interactions of MWCNT and Polymer As Decisive Parameters
For High Performance Of Nanocomposites Chougule HARISHKUMAR,
Ulrich Giese, Robert H. Schuster (DIK, Hannover, Germany)
In Situ µGISAXS Investigation of Gold Sputter Deposition onto Mesoporous Polymer
Templates. Matthias SCHWARTZKOPF, Adeline Buffet (DESY, Hamburg,
Germany), Volker Koerstgens (TU Muenchen), Kai Schlage, Jan Perlich,
Andre Rothkirch (DESY), Gunthard Benecke (DESY), Ezzeldin Metwalli (TU
Muenchen), Mottakin M. Abul-Kashem, Gerd Herzog (DESY), Peter Mueller-
Buschbaum (TU Muenchen), Ralf Roehlsberger, Rainer Gehrke, Stephan V. Roth
(DESY, Germany)
Tailoring Functional Polymer-Metal Nanocomposites Via Sputter Deposition
Stephan V. ROTH, Adeline Buffet, Mottakin Abul Kashem, Gunthard Benecke,
Rainer Gehrke, Gerd Herzog (DESY, Hamburg, Germany), Volker Koerstgens
(TU Muenchen), Jan Perlich (DESY), Monika Rawolle (TU Muenchen),
Ralf Roehlsberger, Andre Rothkirch, Kai Schlage, Matthias Schwartzkopf (DESY),
Peter Mueller-Buschbaum (TU Muenchen)
Enhancement Of Optical Birefringence In Anisotropic Nanocomposites Mediated By
Localized Surface Plasmon Resonance Shunsuke MURAI, Takuya Tsujiguchi,
Koji Fujita, Katsuhisa Tanaka (Kyoto U., Japan)
Modifying Polylactide and Polycarbonate Green Blends for Durable Applications
Yeh WANG, T.-F. Hung, S.M. Chiao (Tunghai U., Taichung) INVITED 25 min Friday
Effects Of Diameter And Stone-Wales Defect On The Functionalization Of Single-Wall-
Carbon Nanotubes By Amine Group Jun CHEN, Bessem Ben Doudou,
Alexandre Vivet, Gerard Nouet, M’hamed Ayachi (U. Caen, France)
Self-Organized Nanoporous Structure With Long Range Perfect Ordering
Qingfeng LIN, SiuFung Leung , Yunze Long, Zhiyong Fan (Hong Kong U.S.T.,
SAR, China)
Multifunctional and Specific Interactions of MWCNT And Polymer As Decisive
Parameters For High Performance Of Nanocomposites Harishkumar CHOUGULE,
Ulrich Giese, Robert H. Schuster (Hannover, Germany)
Fabrication of 2D Silicon Nano-Mold Based On Sidewall Pattern Technique
E. CHENG, Helin Zou, Chong Liu (Dalian U.T., China)
Rheological Characterization Of Chitosan/Nanowhiskers Composites
Hugo Lisboa, Joao P. Borges, Goncalo Pereira, Ana M. Ramos, Maria T. CIDADE
(U. Nova Lisboa, Portugal)
Nanostructured Dlc Coatings For Self-Assembly Applications
Enric BERTRAN, V.M. Freire, E.J. Cabrera, C. Corbella, S. Portal, E. Pascual,
J.L. Andújar (U. Barcelona, Spain)
ZrN/Hydroxyapatite Nanocomposite Coatings By Co-Sputtering Method
A. Joseph NATHANAEL, Jun Hee Lee, Sun Ig Hong Chungnam N.U., S. Korea)
The Influence Of Nano-Fillers On The Insulation Properties Of Epoxy Resin
Qi WANG, George Chen (U. Southampton, UK)
A Novel Nano-diamond Patterning Technique using Selective Nucleation and Growth
Weican XIAO, Xi Zhou, Sean Yost, Ramjee Balasubramanian, Sacharia Albin
(Old Dominion U., Norfolk, VA)
Nanomechanical Properties Of Polyurethane Nanocomposites Studied By Nanoindentation
Kamal YUSOH (U. Malaysia Pahang, Kuantan), M. Song (Loughborough U., UK)
Fabrication and Mechanical Properties of MWCNT Epoxy Composite
Chorng H. TWU (Tainan U.T., Tainan), Chen-Chi M. Ma, Sheng-Yen Wu,
Yuan-Li Huang, Hsi-Wen Tien, Shin-Yi Yang, Siu-Ming Yuen (Nat. Tsing Hua U.,
Hsinchu)
Preparation and Properties of GRAPHENE and its NANOCOMPOSITES
Chen-Chi M. MA, Shin-Yi Yang, Hsi-Wen Tien, Jen-Yu Wang, Shin-Ming Li,
Yu-Sheng Wang, Chia-Hong Liu, Shu-Han She, Wei-Ning Lin (Nat. Tsing Hua U.,
Hsinchu)
Possible Electronic Device Applications of Graphene Nanoribbons
Gengchiau LIANG (Nat. U. Singapore) INVITED 25 min Horizontal Suspension of Carbon Nanotubes
Jianmin MIAO, Jingyu Lu (Nanyang T.U., Singapore)
Carbon Nanotube / Poly(Vinyl Alcohol) Composites Formed By Spray Winding
Wei LIU, Yiping Qiu (Donghua U., Shanghai, China), Qingwen LI
(Suzhou Inst. Nano-Tech and Nano-Bionics, China)
A Prototype of Functional Nanowires-based 3D Biosensor Arrays
Peter X. FENG (U. Puerto Rico)
Effect Of Hot-Stretching Process On The Electrochemical Performance Of Sn at CNFs
Composite Anode Materials For Li-Ion Batteries Xin LI, Yunhua Yu,
Bingxue Liu,and Xiaoping Yang (Beijing U. Chem.Tech., China)
Preparation Of Polylactide Grafted Nano-Hydroxyapatite Via ATRP
Jiqing HE, Zenghui Wang, Fujian Xu, Yuanchao Li, Qing Cai, Xiaoping Yang
(Beijing U. Chem.Tech., China)
Preparation Of Fe3O4/Cap Core-Shell Nanoparticles Exhibiting Good Magnetism And
Bio-application Yu TENG, Qing Cai, Zhou Fang, Keyu Li, Xiaoping Yang
(Beijing U. Chem.Tech., China)
Study Of The Sn/C Nanofibers With Different Sn Contents For Anode Materials In
Lithium-Ion Batteries Keyu LI, Yunhua Yu, Yu Teng, Xin Li and Xiaoping Yang
(Beijing U. Chem.Tech., China)
Compressive Behavior Of Filament Wound Carbon Fiber/Epoxy Composite Tubes With
Different Winding Angles Gang CHEN, Gang Li, Jinming Zhu, Feng Wen,
Yunhua Yu, Xiaolong Jia, Xiaoping Yang (Beijing U. Chem.Tech., China)
Simulation Study Of A High Performance Metal-Oxide Carbon Nanotube Field Effect
Transistor Keka TALUKDAR, Apurba Krishna Mitra (Durgapur, India)
Synthesis And Characterisation Of Polymer-Stabilised AuNP
Haruna MUSA (Bayero U., Nigeria), Terence Cosgrove (U. Bristol, UK), Erol A. Hasan
(U. Liverpool, UK), Abdullahi A. Kogo (Ahmadu Bello U., Zaria, Nigeria), Hamza Abba
(Ahmadu Bello U.)
Effect Of Low-Aspect Ratio On The Enhanced Field-Emission Properties Of Densely-
Packed Ni-Nanowire Arrays Electrochemically Grown Through Porous Alumina
Membrane Arghya N. BANERJEE, Sang Woo Joo (Yeungnam U., S. Korea)
Fabrication of Transparent TiO2 Nanotubes-Film on FTO Glass By An Electrophoretic
Deposition Process Yulong LIAO, Wenxiu Que, Jin Zhang, Peng Zhong
(Xi’an Jiaotong U., China)
Cr Nanostructures Fabricated Based On Porous Anodic Alumina Membranes
Hany HAMDY (Beni-Suef U., Egypt), Sang-Wan Ryu (Chonnam N.U., Gwangju,
S. Korea), Mohamed Shaban (Ben-Seuf U.)
Strain Rate Effect On The Mechanical Properties Of Carbon Nanotube/Epoxy Composites
Yi-Ming JEN (Nat.Taiwan Ocean U., Keelung), Chien-Yang Huang, Pei-Ling Guo,
Yung-Chuan Wang (Chung Hua U., Hsinchu)
Properties Of Compression Moulding Starch –Nanoclay Biocomposites
Ahmad ZURAIDA, H. Anuar (IIUM, Kuala Lumpur, Malaysia)
Role Of Silicon Dioxide Filler On Dry Sliding Wear Behaviour Of Epoxy Nanocomposites
B. SURESHA, R.M. Devarajaiah (Nat.Inst.Engrg., Mysore, India), K.N. Shivakumar
(NCAT, Greensboro, NC), Kishore (Indian Inst.Sci., Bangalore), S. Seetharamu,
P. Sampathkumaran (Central Power Res.Inst., Bangalore)
Effect of Montmorillonite Nanoclay Filler on Surface Degradation Properties of Epoxy-
Based Nanocomposites N.M. RENUKAPPA, Rashmi, C. Ranganathaiah,
Siddaramaiah (Mysore, India)
Effect of the Activation Atmosphere on the Gold-Support Interaction in Au/Rutile
Catalysts Xim BOKHIMI, Rodolfo Zanella, Antonio Morales, Viridiana Maturano,
Carlos Angeles (UNAM, Mexico DF)
Facile Preparation And H2 Separation Of Multi-Walled Carbon Nanotube Buckypaper
Membranes With Tunable Pore Sizes Xiaoshuang YANG, Lixiang Yuan,
Andrew I. Minett, Andrew Harris (U. Sydney, Australia)
Semicrystalline Polyimide/Mwcnt Hybrid Nanocomposites:Structure, Dynamics, And
Properties Baode. ZHANG (Harbin I.T., China), V. A. Bershtein (Ioffe, Russia),
T.E. Sukhanova (ST. Petersburg, Russia), Wanchen. Zang (Jilin U., Changchun, China),
P.N. Yakushev (St. Petersburg), Yao. Li (Harbin I.T.), Chunhai. Chen (Jilin U.),
L.M. Egorova, I.V. Gofman , G. N. Gubanova, A. Y. Volkov, M. E. Vylegzhanina
(St. Petersburg)
Flow Induced Surface Attachment Of Gold Nanoparticles – An In Situ X-Ray Investigation
With Micro-Fluidic Cell Volker KOERSTGENS, Monika Rawolle (TU Muenchen,
Germany), Adeline Buffet, Gunthard Bennecke, Gerd Herzog, Jan Perlich,
Matthias Schwartzkopf (DESY, Hamburg, Germany), Martin Trebbin, Julian Thiele,
Sebastian With (U. Bayreuth, Germany), Frans J. de Jong, Michael Schlueter
(TU Hamburg-Harburg), Stephan V. Roth (DESY, Germany), Stefan Förster
(U. Bayreuth), Peter Müller-Buschbaum (TU Muenchen)
Combustion Synthesis Of (Α+Β)-Sialon Composites
Chun-Liang YEH (Feng Chia U., Taichung)
Nano-Sized Perovskite-Type Oxide / Carbon Nanotube Composites For An Oxygen-
Reducing Electrocatalyst Kohei MIYAZAKI, Tomokazu Fukutsuka, Takeshi Abe,
Zempachi Ogumi (Kyoto U., Japan)
Toughening Epoxy Thermosets And Their Carbon Fibre Reinforced Composites With
Electrospun Nanofibres Jin Zhang, Tong LIN, Xungai Wang (Deakin U., Geelong,
Australia)
Fluorescence of Variously Terminated Nanodiamond Particles
Irena KRATOCHVILOVA, A. Kovalenko, V. Rezacova, L. Fekete, F. Fendrych,
S. Zalis (Prague), V. Kocka (Charles U., Prague), M. Ledvina, P. Cígler, J. Stursa
(Prague), M. Nesládek (Diepenbeek, Belgium)
Processing Of Nanomaterials In The C-B-N System
Raj N. SINGH (U. Cincinnati, OH)
Mechanical Properties Of Spark Plasma Sintered Al2O3-ZrO2-TiO2 Composites
Ipek Akin, Filiz Sahin, Onuralp Yucel, Gultekin GOLLER (Istanbul T.U., Turkey)
Layered Oxide Nanowires For High-Energy Lithium ION Batteries
Liqiang MAI, Lin Xu, Xu Xu, Chunhua Han, Yanzhu Luo (Wuhan U.T., China)
Surface Plasmon Resonance Of Ag Nanocrystallines In Opaa Template
Shanshan Han, Xiuchun YANG, Yan Liu, Junwei Hou, Xiaoning Li, Wei Lu (Tongji U.,
Shanghai, China)
Nanoindentation Behavior of Naturally Layered Materials
Jianhong Zhang (Tsinghua U., China), Zhongxin Wei, Guoping Zhang
(Louisiana St.U.)
Formation Of Oxide Nanoclusters In Nanostructured Ferritic Alloys During Anisothermal
Heat Treatment Celine HIN (Mass Inst Tech, and UC Berkeley) , B.D. Wirth,
J.B. Neaton (UC Berkeley, Calif.) INVITED 25 min
Atomic Mobility, Freezing, And Superconductivity In Arrays Of Metallic Particles Within
Nanoporous Matrices Elena V. CHARNAYA (Nat. Cheng Kung U. and St.Petersburg
St.U.), Cheng Tien, M. K. Lee (Nat. Cheng Kung U.), D.Y. Xing (Nanjing U., China),
B.F. Borisov, Yu. A. Kumzerov (Ioffe Physico, St. Petersburg, Russia)
Influence of Surface Defects On Flexural Strength in ZrN-AlON Nanocomposites
Xiaojun Zhao, Hongqiang Ru (Northeastern U., Shenyang, China), D.L. Chen
(Ryerson U.,Toronto, Canada), N. Zhang, B. Liang (Shenyang U., China) POSTER
One-Step Synthesis of Al-doped ZnO Nanocrystalline Aggregates With Polydisperse And
High Specific Surface Area Jin ZHANG, Wenxiu Que, Yuan Yuan, Peng Zhong,
Yulong Liao (Xi’an Jiaotong U., China) POSTER
OXIDE COMPOSITES
Preparation of Bi-Superconducting Grains Included Seed-Crystals By Shock
Compaction Hiroshi KEZUKA (Tokyo U.T., Japan), Kazuhiro Endo (Kanazawa I.T.,
Japan), Mineo Itoh (Kinki U.), Hitoshi Matsumoto, Hiroaki Kishimura (Nat. Def. Acad.),
Tamio Endo (Mie U., Japan), Shunichi Arisawa (NIMS, Japan)
Dominant Role Of Grain Boundary Scattering On Carrier Transport Of Highly
Transparent Conductive Ga-Doped ZnO Films Tetsuya YAMAMOTO,
Huaping Song, Hisao Makino and Naoki Yamamoto (Koichi U.T., Japan)
Scratch Resistance Of Transparent Conductive Oxide Film On Polymer Substrate
Inguna STRAZDINA, Toms Torims (Riga T.U., Latvia), Edmunds Macevskis,
Viktors Kozlovs (Sidrabe Inc, Riga, Latvia)
Origin Of Feroomagnetism In Amorphous Euo-TiO2 Thin Films
Katsuhisa TANAKA, Koji Fujita, Yanhua Zong, Takahiro Kawamoto,
Hirofumi Akamatsu, Yoshiro Kususe, Shunsuke Murai (Kyoto U., Japan)
Fracture Strength Nanostructured Material Based On Dioxide Zirconium Monocrystalline
Maxim PUGACHEV, Gennadi Moskvitin, Askold Melshanov (Inst.Machines Sci,
Moscow, Russia)
Strength Nanostructured Material Based On Dioxide Zirconium Monocrystalline
Gennadi MOSKVITIN, Maxim Pugachev, Askold Melshanov, Sofia Alexeeva
(Inst.Machines Sci, Moscow, Russia)
Fabrication Of Intrinsic Josephson Junctions Stacks And Loosely Bound Atoms In
Superconducting Oxides Marco TRUCCATO, Angelo Agostino, Stefano Cagliero
(Torinto U., Italy), Holger Motzkau, Andreas Rydh, Vladimir Krasnov
(Stockholm U., Sweden) INVITED 25 min
Li1.6[MnM]1.6O4 (M=3d Transition Metal) Spinel Type Manganese Oxides Prepared By
Hydrothermal Method Kang-Sup CHUNG (Korea Inst. Geosci. & Min Res., Daejon,
S. Korea), Wonjin Moon, Kyoungshin Lee, Byungkyu Park (Korea Basic SCi Inst,
Suncheon), Sujin Pang (Chonbuk Nat. U.), Soon-Ki Jeong (Soonchunhyang U.),
Hyejin Seo, Daehee Won (Suncheon Nat. U.), Yangsoo Kim (Korea Basic Sci Inst.,
Suncheon) The Effect Of Metal Oxide-Carbon Support On Electrocatalysts For Fuel Cell Reactions
B. Ruiz-Camacho (U. Poitiers, France), M.A. Valenzuela (ESIQIE, Mexico),
Nicolas ALONSO-VANTE (U. Poitiers, France)
Growth of Catalyst-free SiC and SiC/SiO2 Nanowires using the Precursor of
Methyltrichlorosilane Yoo Youl CHOI, Doo Jin Choi (Yonsei U., Seoul, S. Korea)
Wed PM-Fri
Structural Degradation And Sensing Properties Of ZnO Nano Films
Xiaoyan PENG, J. Chu, M. Sajjad, P.X. Feng (U. Puerto Rico, San Juan)
Stimuli-Responsive Periodic Micro Structures On Oxide-Polymer Hybrid Films
Masahide TAKAHASHI, Yasuaki Tokudome (Osaka Prefecture U., Japan)
Rheological Properties Of Polyethylene-Copper Oxide Composites
` Tiam-Ting TEE, Tin-Sin Lee, Yew-Sing Chin (UTAR, Kuala Lumpur, Malaysia)
Metal-Oxide Based Supports For Electrocatalysis In Proton-Exchange Membrane Fuel
Cells Frederic MAILLARD, F. Micoud (Grenoble-INP, France), A. Bonnefont
(U. Strrasbourg, France), M. Chatenet (Grenoble-INP, France)
Stannic Oxide Nanopowders Via The Co-Precipitation Method
Mohamed .M. RASHAD, Adel A. Ismail, I. Osama, Ibrahim A.Ibrahim (CMRDI, Cairo,
Egypt), Abdel-Hakim T.Kandil (Helwan U., Cairo, Egypt)
Fabrication And Characterization Of Cu2O/TiO2 Composite Films For Solar Cell
Applications Ayib Rosdi ZAINUN (UiTM, UMP, Malaysia, and Nagoya I.T., Japan),
Tomoya Sakamoto (Nagoya I.T., Japan), Uzer Mohd Noor, Mohamad Rusop
(U.Tek MARA, UiTM, Malaysia), Masaya Ichimura (Nagoya I.T.)
Microstructure of Magnetron Sputtered ZnO Films on Glass Substrate
Shiuh-Chuan HER, Tsung-Chi Chi (Yuan Ze Univ., Chung Li)
Oxidation Of Ni3Al-(Cr, Zr, Mo, B) Alloy Between 900 And 1100°C In Air
Seul-Ki KIM, Min-Jung Kim, Sang-Hwan Bak, Dong-Bok Lee (Sungkyunkwan U.,
Suwon, S. Korea)
TEXTILE COMPOSITES (Natural Fiber/resin)
Effect Of Various Surface Treatments For Jute Fiber Reinforced Composites
Jeong-myung BYEON, Jin-woo Kim, Gi-beop Nam, Jung-il Song (Changwon N.U.,
S. Korea)
Mechanical Properties of Carbon Fabric-Phenolic Resin Composite Using Carbon
Nanotubes Yi-qi WANG, Joon-hyung Byun, Cheon Won, Zhi-peng Hui, Jung-il Song
(Changwon N.U., S. Korea)
Rubber Toughening Of Polylactic Acid
Mohd BIJARIMI, A. Sahrim, R. Rasid (U.Kebangsaan, Malaysia), H. Zulkafli
(U. Malaysia Pahang)
Rubber Toughened Polyester Nanocomposite – Mechanical and Morphological Properties
N.N. BONNIA (U.T. MARA, Malaysia) S. Ahmad (U. Kebangsaan, Malaysia), S. Surip,
S.Y. Syed Yahya, M. Mahat.M (U.T. MARA)
Nanoindentation Characteristic of Nanoclay/ Rubber Toughened-UPE Nanocomposite.
S.N SURIP (U.T. MARA, Shah Alam, Malaysia), Z.Y Zhang, H.N. Dhakal (U.
Portsmouth, UK), N.N. Bonnia (U.T. MARA)
Properties Enhancement of PLA-Natural Fibre Composites Using An Ethylene Copolymer
Maryam Talimi, Ghaus RIZVI (Univ. Ontario Inst. Tech., Canada)
A Simple Constitutive Model For Plain-Woven C/SiC Composites
Jun LI, Guiqiong Jiao, BoWang,ChengpengYang, Shifei Liang (Northwestern Polytech.
U., Xi’an, China)
Prediction Of Kink Band Formation In 3D Textile Glass Fiber Composites Using A Multi-
Scale Modeling Strategy Dianyun ZHANG, Anthony M. Waas (U. Michigan),
Chian-Fong Yen, Seth Ghiorse (US Army. Aberdeen P.G., MD)
Modeling The Stress-Strain Behavior Of Triaxially Braided Composites
Xinran XIAO, Christopher Cater (Michigan St.U., East Lansing)
Effect Of Surface Modification Of Kevlar Stitch Threads On Interfacial Hydrothermal
Properties Of Carbon Fiber Reinforced Epoxy Stitched Composites
Tao AI (Chang'an U., Xi'an, China), Rumin Wang (Northwestern Poly U., Xi'an, China),
Jie Deng (Aerospace Comp. Mat. Res. Inst., Xi'an, China)
Nanophase Treatment Of Natural Fiber For Fiber Reinforced Polymer Composites
Sheldon Q. Shi, Jinshu Shi, Kaiwen Liang, Jinwu WANG (Mississippi St.U., Starkville)
Prediction Of Glass Leno Fabrics Porosity And Strength
Jirí MILITKY (TU Liberec, Czech Rep.), Jaroslav Dvorak (Res Inst.Textile Machinery,
Liberec, Czech Rep.), Dana Kremenakova, Brigita Kolcavova-Sirkova (TU Liberec)
Electromagnetic Shielding Of Hybrid Weaves
Veronika SAFAROVA, Jiri. Militky (TU Liberec, Czech Rep.)
Preparation Of Nanocellulosic Powder From Jute Fibres By Ball Milling Process
Vijay BAHETI, Miroslava Marsalkova, Jiri Militky (T.U. Liberec, Czech Rep.)
Factors Affecting the Tearing Resistance of Textile Structures
Patricia DOLEZ, Ennouri Triki and Toan Vu-Khanh (Ecole Tech Sup, Montreal, Canada)
Experimental Investigations Of The Impact Behavior Of A Warp Interlock Fabric
Cuong HA-MINH, François Boussu, Jan Van Roey, Toufik Kanit, David Crépin,
Abdellatif Imad (U. Lille Nord de France) Generalized Geometric Model Of 3D Woven Preforms From Spun Yarns
Abdel-Fattah M. SEYAM, Mehmet E. Ince (N. Carolina St. U., Raleigh)
Compatibilizing Effect Of Epoxy On The Structure And Properties of PET/PA6 Blend
Fibers Jing ZHOU, ByungGil Min, JuYeon Kim (Kumoh Nat. I.T., Gumi, S. Korea)
Research On Pultrusion Of Polybenzoxazine Resin Matrix Z-Pins
Xiangyang ZHANG, Yong Li, Jun Xiao (NUAA, Nanjing, China)
Study On Test Method For Shear Properties Of Minisize Rod―Z-Pin
Ning Li, J. XIAO (NUAA, Nanjing, China)
Effects Of Ultraviolet Aging On The Mechanical Properties Of Hemp Fibers
Shuai JIN, Xiaolu Gong (U.T. Troyes, France)
Mechanical Properties Of Unidirectional Jute Fiber Reinforced Poly(Butylene Succinate)
Biodegradable Composites Huu Nam TRAN, Shinji Ogihara (Tokyo U. Sci., Japan)
Water Permeation In Polylactide And Polylactide/Montmorillonite Composites
An DU, Donghun Koo, Mary Ziegler, Richard A. Cairncross (Drexel U., PA)
Advanced Application Of Natural Fibres In High Performance Automotive Composite
Structures V.R Soroush, Hessam GHASEMNEJAD, D.R. Marchant, A. Aboutorabi
(Kingston U., London, UK)
Chemically Modified Glass and Cotton Fibres Reinforced Polyester Resins
A.A. KOGO, O.K. Sunmonu, E.G. Kolawole (Ahmadu Bello U., Zaria, Nigeria)
Extraction, Fabrication and Evaluation of Sansevieria Roxburghiana Fiber
M. Kanimozhi ARUN, N. Vasugi Raaja (A. Univ. for Women, Tamilnadu, India) Effect Of Coupling Agent On The Interfacial Properties Of 3d Ramie/Polypropylene Composites
Yang SHEN,Jianmeng Zhao, Nanting Zhou, Qian Zhang, Xiaomeng Fang, Yiping Qiu,
Hui Wang (Donghua U., Shanghai, China)
Shape Memory Effect and Thermomechanical Properties Shape Memory Polymer Fabric
Composite in Tension Mode M. Ahmad, D. Singh, M. Miraftab, J.K. LUO
(U. Bolton, UK)