Upload
others
View
20
Download
0
Embed Size (px)
Citation preview
3.2.
4. 5.
1. Content
Controller attachment
The ICAROS software and hardware supports the systems: HTC Vive, Oculus Rift and Samsung Gear VRThis manual describes specifically the connection of the ICAROS controller with the desktop app for the systems: HTC Vive and Oculus Rift
Pull the Velcro through the recesses on the ICAROS controller as shown in the illustration.
Rough side facing inward
Attach the ICAROS controllerwith the velcro to the right hand grip of the ICAROS Pro.
ICAROS GmbH 2017 | Fraunhoferstr. 5 | 82152 Martinsried | www.icaros.com | [email protected] | +49 89 414182133 | All rights reserved
ICAROS Controller
Controller Velcro
Controller Velcro
Cable Lock (self-adhesive)
3 Meter USB cable
Remove the protective film from the bonding surface of the cable lock and attach it to the underside of the arm support plate.
Open the cable lock velcro
Connect the Micro USB cable to the ICAROS controller and secure it with the Velcro tape.
USB
Micro USB
The ICAROS software and hardware supports the systems: HTC Vive, Oculus Rift and Samsung Gear VRThis manual describes specifically the connection of the ICAROS controller with the desktop app for the systems: HTC Vive and Oculus Rift
7.
6.
Controller installation
ICAROS GmbH 2017 | Fraunhoferstr. 5 | 82152 Martinsried | www.icaros.com | [email protected] | +49 89 414182133 | All rights reserved
Press and hold the button with the circle symbol for a few seconds. The LED on the side of the ICAROS controller flashes green.
When the controller flashes blue in a faster interval connect the USB cable to your PC.
1. Open the ICAROS game folder. 3. Select your display. For further details to the set up of the HMD, read the corresponding instructions.
6. Place yourself in start position and press any key.
7. The game starts now. Enjoy the training.
4. Choose between Single and Multiplayer.
2. Open the ICAROS game application.
5. Compare the ICAROS controller from the controller list with the 4-digit serial number on the side of the controller. If no controller is displayed, close the game app, restart the cont-roller and reconnect it as shown in the descrip-tion. Now restart the game application.