ICAM50x Series – Intrinsically Safe Digital Cameras Copyright Extronics Ltd 2013 1 iCAM50x Series Intrinsically Safe Digital Cameras for Hazardous Areas

iCAM50x Series – Intrinsically Safe Digital Cameras Copyright Extronics Ltd 2013 1

iCAM50x SeriesiCAM50x Series

Intrinsically Safe Digital Cameras for Intrinsically Safe Digital Cameras for Hazardous AreasHazardous Areas

Intrinsically Safe Digital Cameras for Intrinsically Safe Digital Cameras for Hazardous AreasHazardous Areas


ATEX II 1 G Ex ia IIB T4/T3 Ga, II 2 G Ex ia IIC T4 Gb, -20°C ≤Ta≤+60°C M1 Ex ia I Ma 0°C ≤Ta≤+60°C IECEx Ex ia IIB T4/T3 Ga, Ex ia IIC T4 Gb, -20°C ≤Ta≤+60°C Ex ia I Ma 0°C ≤Ta≤+60°C Class 1 Division 1 Groups ABCD T4/T3C -20°C≤Ta≤55/50°C

IP65

-Focal distance 30 cm to infinity

iCAM501UiCAM501U General Specifications General SpecificationsiCAM501UiCAM501U General Specifications General Specifications


ATEX II 1 G Ex ia IIB T4/T3 Ga, II 2 G Ex ia IIC T4/T3 Gb, -20°C ≤Ta≤+60°C M1 Ex ia I Ma 0°C ≤Ta≤+60°C IECEx Ex ia IIB T4/T3 Ga, Ex ia IIC T4/T3 Gb, -20°C ≤Ta≤+60°C Class 1 Division 1 Groups ABCD T4/T3C -20°C≤Ta≤55/50°C Ex ia I Ma 0°C ≤Ta≤+60°C

IP65

-Focal distance 5 cm to infinity

iCAM502iCAM502 General Specifications General SpecificationsiCAM502iCAM502 General Specifications General Specifications


ATEX & IECEx Zone 0ATEX & IECEx Zone 0ATEX & IECEx Zone 0ATEX & IECEx Zone 0The world’s only Zone 0 rated digital cameras. Ideal for making visual records in hazardous areas e.g.

Oil & Gas

Chemical

Pharmaceutical

Marine


The iconic injection moulded anti static plastic housing is IP65 rated and suitable for use in the most arduous environments

The long slim camera enclosure lends

itself to single handed operation and

weighing less than 200g is convenient

to carry in your pocket

Dimensions: 132mm x 32mm x 22mm

(5.20” x 1.26” x 0.87”)

Rugged Compact and LightweightRugged Compact and Lightweight Rugged Compact and LightweightRugged Compact and Lightweight


The powerful new integrated 4

LED flash array allows for picture

capture in very poor light

conditions giving 131 lux.seconds

of energy at 67ms exposure

Super Bright 4 LED FlashSuper Bright 4 LED Flash Super Bright 4 LED FlashSuper Bright 4 LED Flash


New feature in software to produce the

correct amount of flash for a particular

setting.

The unit fires a short pulse of light in

low power mode and measures the

reflected light. The flash is then

adjusted to produce the amount of light

needed.

Variable Flash IntensityVariable Flash Intensity Variable Flash IntensityVariable Flash Intensity

Full Power

VariableFlash


Sample Images with FlashSample Images with FlashSample Images with FlashSample Images with Flash

Example image

taken with flash

in total

darkness from 3

metres


Sample Images with FlashSample Images with FlashSample Images with FlashSample Images with Flash

Example image

taken with flash

in total

darkness from 1

metre


High quality images are produced every time, minimising the possibility of blurring

Top image is an example of an image where the camera was moved at the point of taking a picture.

The iCAM501 with anti shake technology rejected this picture and saved the first image without blurring as shown in the quality of the picture of the bottom image.

Anti Shake Feature Anti Shake Feature Anti Shake Feature Anti Shake Feature


Image Sharpness AnalysisImage Sharpness AnalysisImage Sharpness AnalysisImage Sharpness Analysis

Fail

Pass

Feature which assesses each picture taken using a powerful image processing algorithm. Compares results to a reference figure and, if necessary, indicates that the image needs to be retaken.

Image quality is indicated by a series of lights – see below


High resolution images provide

greater detail of equipment or larger

areas such as plant rooms and

buildings.

2048 x 1536 resolution means it is

possible to zoom in several times on

a section of image without reducing

the image quality

New High Performance Lens New High Performance Lens New High Performance Lens New High Performance Lens


Sample ImagesSample ImagesSample ImagesSample Images

Example image

taken outside in

normal daylight


Sample ImagesSample ImagesSample ImagesSample Images

Example image –

Wiring taken

indoors from

10cm in low light

with iCAM502


Never forget – Record voice notes to

store a .wav file with the same

filename as the image taken for

detailed reports.

Voice Annotations Voice Annotations Voice Annotations Voice Annotations


Field upgradeable USB firmware

utility allows future upgrades to be

carried out by the user.

User Upgradeable User Upgradeable User Upgradeable User Upgradeable


Allows for a much higher level

of visual/ audible data storage

Hold approx 5,000 JPEG

images without any audio

recording and additional

960Kbytes per minute for audio

1GB Memory1GB Memory1GB Memory1GB Memory


Transfer data in 3 simple steps

1. Twist battery cover off - can be done with a coin

2. Connect to USB 1.1 - Picture Transfer Protocol (PTP) is initiated automatically. NOTE: For connection in a Safe area only

3. Transfer Data - All images are date and time stamped to create a chronological history. Voice audio records are systematically matched to the image filename

Certified for direct connection to a PC without requiring an external protection barrier

Simple Data TransferSimple Data TransferSimple Data TransferSimple Data Transfer


Certified for use with leading brand alkaline

cells means the camera is always ready to

use any time, any place.

2 x Alkaline AA batteries, refer to Ex

Certificate for details on range of approved

batteries

Battery Life: Approximately 600 shots

without flash or 100 shots with flash taken

consecutively .

Powered by Primary CellsPowered by Primary CellsPowered by Primary CellsPowered by Primary Cells


Any Questions?Any Questions?

Documents

ICAM50x Series – Intrinsically Safe Digital Cameras Copyright Extronics Ltd 2013 1 iCAM50x Series Intrinsically Safe Digital Cameras for Hazardous Areas