Upload
andreluistrc
View
2.987
Download
2
Embed Size (px)
Citation preview
Technical Sales Support, Americas
© 2006 IBM Corporation
IBM eConfig Training –Install and Setup
Don [email protected]– 800–426-9990
November 1, 2006Don Jernt
Technical Sales Support, Americas
© 2006 IBM Corporation2
AgendaHow To Obtain IBMLink ID's For BUSINESS PARTNERSIBMLink and Unattended updatesIBMLink USSystem PreparationsHardware and Software RequirementsEpadm
– Adding ModuleseConfig is LoadedE-Config SetupUser Profiles
– Feedback– Base Retrieval – Base Edit
Technical Sales Support, Americas
© 2006 IBM Corporation3
Call 800-426-9990 (press zero) and ask for the IBMLink Request desk.
Leave the following information in the voice mail. A PWCS representative will return your call.– Phone number– Name– Email Address– IBM ID – Company name
Brief Message
How To Obtain IBMLink ID's For BUSINESS PARTNERS
Technical Sales Support, Americas
© 2006 IBM Corporation4
To be able to download econfig you will have to have an IBMLINK ID and password.
Here is the website to download:
https://www.ibmlink.ibm.com
Here is a web site that can be use for unattended updates. For external users, fill in as follows:
http://www-306.ibm.com/cgi-bin/services/epadm/iunattended.pl
IBMLink and Unattended updates
Technical Sales Support, Americas
© 2006 IBM Corporation5
Technical Sales Support, Americas
© 2006 IBM Corporation6
PartnerWorld
Technical Sales Support, Americas
© 2006 IBM Corporation7
PartnerWorld Login:
Technical Sales Support, Americas
© 2006 IBM Corporation8
System Preparations This information is found on the first epadm screen. Installing Java and epadmpre.exe must be done before attempting to install econfig.
https://www-304.ibm.com/jct03001c/cgi-bin/services/epadm/linkto.pl?template=preparations.shtml&applscript=econfig&mode=ext
The recommended version for e-padm is JRE 1.4.2. The URL where you can find the SUN JRE is http://java.sun.com/j2se/downloads/index.html.
Technical Sales Support, Americas
© 2006 IBM Corporation9
NOTE: Running other applications which demand memory and processor cycles concurrent with IBM Configurator for e-business may have an adverse effect on system performance. For such situations, it is recommended that memory be added to the minimum required, and a faster processor used.Your workstation must meet or exceed the following hardware and software requirements:
Minimum Hardware Required:
366 MHz CPU (Intel Pentium, Intel Celeron)
128 MB RAM (256 MB RAM or more recommended for better performance)
400 MB disk space
800 x 600 SVGA screen resolution
Network interface: 10 MB for LAN connection or 28.8 kbps minimum for modem connection
Software Requirements:
One of the following supported operating systems:
Windows NT 4.0 with Service Pack 6A
Windows 2000 Professional with Service Pack 2
Windows XP Professional 1gb PLUS or memory for better performace
Software required in addition to the operating system:
Java Runtime 1.4.2
Microsoft Java Virtual Machine 3802 or higher
For web updates and CPF functions, one of the following supported web browsers:
Microsoft Internet Explorer 5.01 with Service Pack 2
Microsoft Internet Explorer 5.5 with Service Pack 1
Microsoft Internet Explorer 6.0 (Windows XP only)
Netscape Navigator/Communicator 4.7x
Netscape 6.2 (Windows XP only)
Mozilla Firefox 1.0.x
For viewing the PDF version of the User's Guide: Adobe Acrobat Reader 3.01 or higher
Updated on April 14, 2005
IBM Configurator for e-business (e-config) Hardware and Software Requirements
Technical Sales Support, Americas
© 2006 IBM Corporation10
Technical Sales Support, Americas
© 2006 IBM Corporation11
Epadm ScreenHere is were you will pick what module and price files to load.
Technical Sales Support, Americas
© 2006 IBM Corporation12
You see a switch on some lines of information. These expand formore choices. Under Geography your location.
Adding Modules
Technical Sales Support, Americas
© 2006 IBM Corporation13
Continue expanding modules and picking the appropriate price files.
Technical Sales Support, Americas
© 2006 IBM Corporation14
If you need prices for Canada you need pick the Canada Combo file. Once all your items are selected click Install/Update.
Technical Sales Support, Americas
© 2006 IBM Corporation15
Once e-Config installation is done you will have to reboot your system.
During the install of eConfig a folder was created on your desk top. Inside the folder there is an icon. Drag this to your launch pad. This is what will start econfig. The users guide will be found in the folder as well.
Technical Sales Support, Americas
© 2006 IBM Corporation16
eConfig setupWhen you first launch e-Config you will see Figure A Select the two blank options. Then click OK.Having the two blanks configured you jump right to Figure B.
Figure BFigure A
Technical Sales Support, Americas
© 2006 IBM Corporation17
User Profiles, Menus and Settings
Technical Sales Support, Americas
© 2006 IBM Corporation18
Feedback process
Technical Sales Support, Americas
© 2006 IBM Corporation19
Base Retrieval
Technical Sales Support, Americas
© 2006 IBM Corporation20
BaseEdit Setting
Technical Sales Support, Americas
© 2006 IBM Corporation21
Edit Base System
Technical Sales Support, Americas
© 2006 IBM Corporation22
Order Forward
Technical Sales Support, Americas
© 2006 IBM Corporation23
System Profile - Portfolio
Technical Sales Support, Americas
© 2006 IBM Corporation24
System Profile – Diagram Export
Technical Sales Support, Americas
© 2006 IBM Corporation25
Starting the config for the first time.
Technical Sales Support, Americas
© 2006 IBM Corporation26
Do a right mouse click in the customer column.
Screen 1
Screen 2
Screen 3
Technical Sales Support, Americas
© 2006 IBM Corporation27
Geo & Crad Date
Technical Sales Support, Americas
© 2006 IBM Corporation28
Price Files9133-55A Server 1:SYSTEM P5 1 1,199.00
0265 AIX PARTITION SPECIFY 1 N/C
1930 1024MB(2X512MB)DIMMS,276-PIN 1 550.00
1968 73.4GB 10K RPM U320 SCSI DDR 1 339.00
1994 IDE SLIMLINE DVD-ROM DRIVE 1 207.00
4650 NO FACTORY INTEGRATION IND 1 N/C
5005 SOFTWARE PREINSTALL 1 N/C
6458 PWR CAB.-DRAWER TO IBM PDU 1 14.00
6592 ULTRA320 SCSI 4-PACK 1 244.00
7162 IBM RACK-MOUNT DR.RAIL KIT 1 168.00
7192 IBM RACK-MOUNT DR.BEZ.AND HW 1 2,760.00
7323 1PROC.ACTIV.FOR PROC.FC#8312 2 4,200.00
9133-55A Server 1:9133 Model 55A 1 1,199.00
0265 AIX Partition Specify 1 N/C
1930 1024 MB (2X512MB) DIMMS, 276-PIN, 533 MHZ, 1 550.00
DDR-2 SDRAM
1968 73.4 GB 10,000 RPM Ultra320 SCSI Disk Drive 1 339.00
Assembly
1994 IDE Slimline DVD-ROM Drive 1 207.00
4650 Rack Indicator- Not Factory Integrated 1 N/C
5005 Software Preinstall 1 N/C
6458 Power Cable -- Drawer to IBM PDU, 14-foot, 1 14.00
250V/10A
6592 4-Disk Slot Exp - Base Ctlr 1 244.00
7162 IBM/OEM Rack-mount Drawer Rail Kit 1 168.00
7192 IBM Rack-mount Drawer Bezel and Hardware 1 2,760.00
7323 One Processor Activation for Processor Feature 2 4,200.00
#8312
Technical Sales Support, Americas
© 2006 IBM Corporation29
AIX – Default settings
Technical Sales Support, Americas
© 2006 IBM Corporation30
Services Defaults
Initial Service - ( Server 1 )
Extended
Product Description Qty Price Term
________ _____________________________ ___ ________ ____
6942-25B WARRANTY SERVICE UPGRADE 1 N/C
4524 SAME DAY 24X7X4 RESPONSE 1 N/C
5707 9133-55A 24X7X4 WSU 1 2,100.00 OTC
6942-89K IMPLEMENT SERVICE PSERIES HW 1 N/C
4039 PSERIES HW INSTALLATION 1 595.00 OTC
6942-CON CONTRACT COVERAGE (N/C CODES) 1 N/C
0096 SERVICEELITE 1 N/C
6942-HMA HARDWARE MAINT. (N/C CODES) 1 N/C
0025 MA HOURS OF COVERAGE-DEFAULT 1 N/C
6942-TCS TERMS (N/C CODES) 1 N/C
0050 REQUEST PROPOSAL FOR PRICES 1 N/C
0053 PREPAY BILLING 3 YEAR 1 N/C
Technical Sales Support, Americas
© 2006 IBM Corporation31
Econfig Main Screen
Technical Sales Support, Americas
© 2006 IBM Corporation32
Product and Technical LinkseConfig how to get help for p5 configurations and technical info from Partner Line – North America:
• Partnerline 800-426-9990 option “0” Ask For System p Pre-Sales SupportEConfig Download and Installation sites
For IBMLink 2000 usershttp://www-306.ibm.com/ibmlink/link2/epadm/epadmPage.jsp– For IBM users
• http://w3.viewblue.ibm.com/eConfig WEB Based Education:– Must be logged into IBMLink for BP’s or ViewBlue applications to gain access
• http://ftp.ibmlink.ibm.com/econfig/announce/training.htmeConfig Help Desk Phone Number:– 888-293-3872
Product Info Lookup:– Salesman and announce info
• http://www-306.ibm.com/common/ssi/OIX.wss– Hardware information center, great resource for researching power requirements and plug types
• http://publib.boulder.ibm.com/infocenter/iseries/v1r2s/en_US/index.htm