ibl.co · 5.5.0 H f e lectronic Transformers ( eT) ... 6.2.0 b Array 6.2.1 c Array ... 210X.XXX7 Fixed round Alume with 7 chip LED 14W 2.7K,

ibl.co.uk

IBL Lig

hting

IBL Lighting

ibl.co.uk

IBL Lighting LtdRecognised. Value.

U.K. Office Tel +44 (0) 844 822 5210 fax +44 (0) 844 822 5211 AUSTRALiAN Office Tel +61 (0)3 8415 1970 fax +61 (0) 3 8415 1973 HONg KONg Office Tel +852 2763 1255 fax +852 2763 1262

ViSiT www.ibl.co.uk/contact TO fiNd yOUR NeAReST wORLdwide diSTRibUTOR

IBL Lighting

As we enter our 27th year of business, the second edition of the new ibL architectural lighting catalogue continues our commitment toward the development of architectural light fixtures that utilise the latest technology available. Our attention to technical detail & advancement is a direct reflection of our understanding of our customers needs and representing evolving technology.

The range has expanded yet again with the addition of over 1000 new fixtures and options coupled to the utilisation of the latest Led technology offering Led engines with 2-step MacAdam step binning and colour rendering index as high as 95.

Our customers remain our strongest focus and continue to inspire us with their use of light and space in commercial residential & urban spaces. The new products in the following pages reflect the changes and growing demand of our customers. we listen to our customers across all regions and markets. we will continue to comply with international standards and conform to legislation in all that we do. we will continue our product development program with a view to always improving.

ibL Lighting is proud to provide a 10 year product warranty to underwrite our commitment to the international lighting market.

Andrew PenfoldChief Executive Officer

IBL Lighting

1.0 4.02.0 5.03.0 6.0ecOSeal

2.1 Logical Matrix2.2 ecOSeal Alume Led2.3.0 ecOSeal fixed Led2.3.1 ecOSeal Tilt Led2.4 ecOSeal Mini2.5 ecOSeal Micro2.6 ecOSeal Nano2.7 ecOSeal Alume eLV2.8 ecOSeal eLV

3.1 Logical Matrix3.2 Synergy choice3.3 Synergy choice

Low Profile3.4 Synergy choice XL3.5 Synergy choice Led3.6 Synergy Surface Mount3.7 Synergy Square3.8.0 Synergy Hid3.8.1 Synergy Hid

Adjustable3.9 Synergy Standard3.10.0 Synergy compact cfL3.10.1 Synergy compact Led3.11.0 Mini Synergy Round3.11.1 Mini Synergy Square3.12 Synergy Accessories

Linear

4.1 Logical Matrix4.2 Slim cove Led4.3 Adjustable Linear Led4.4 Linear Led bar4.5.0 Led Profiles Quadrant4.5.1 Led Profiles Recessed4.5.2 Led Profiles Suspended & Surface4.5.3 Led Profiles Suspended & Surface4.5.4 Led Profiles Surface4.6 Led Light Panel4.7 Led Light Strip

Transformation

5.1 Logical Matrix5.2.0 constant current

Led drivers5.2.1 current Limiting

dimmable Led drivers

5.3.0 12V constant Voltage Led drivers

5.3.1 24V constant Voltage Led drivers

5.3.2 PwM dimming Modules

5.4 Led driver Accessories

5.5.0 Hf electronic Transformers (eT)

5.5.1 Hf electronic Transformers (Pc)

5.5.2 Hf electronic Transformers (Low Profile)

5.5.3 Hf electronic Transformers (eLT)

5.6 SHf Metal Halide ballast

Technical data

6.1.0 3 chip XPg26.1.1 4 chip XPg26.1.2 7 chip XPg26.2.0 b Array6.2.1 c Array6.3 Led engine

Part codes

SynergyAccent

Contents

1.1 Logical Matrix1.2.0 Alume Round Led 1.2.1 Alume dark Led 1.2.2 Alume Square Led1.3 Alume Miniature Led1.4 wall Led1.5.0 glass Pin Hole Led1.5.1 glass Slot Led1.5.2 glass Round Led1.5.3 glass Square Led1.6.0 dark Pin Hole Led1.6.1 dark Slot Led1.6.2 dark Trimless Led1.6.3 dark Trimless fixed Led1.6.4 dark Trimless Adjustable Led1.7.0 Multi X Led1.7.1 Multi XL1.8 flute Spot Led1.9 X Spot Led1.10 Surface Mount XL Led1.11 Surface Mount Led1.12 Under cabinet Led

ComplianCe

this range includes a selection of spotlights and downlights designed to control colour, direction and intensity of light.

we have developed fittings using the latest lamp and control technology, including lED fixtures that are discrete in design and require little maintenance. they are designed for use in:

• Retail display • Hotels • Museums • Restaurants and bars • Residential spaces

Features• Energy saving • Full intensity from switch on • ‘Warm white’ or ‘cool white’ colours • Wide, medium or narrow beam lenses • Wide range of finishes • Low operating temperature • Long life • Remote driver with S.E.L.V. output • Safe, Class III, luminaire

1.0

AccentALUMe dARK Led

ALUMe ROUNd Led

gLASS ROUNd Led

dARK TRiMLeSS fiXed Led

gLASS SLOT Led

gLASS PiN HOLe Led

gLASS SQUARe Led

dARK PiN HOLe Led

ALUMe MiNiATURe Led

wALL Led

dARK TRiMLeSS Led

dARK SLOT Led

MULTi X Led

SURfAce MOUNT XL Led

fLUTe SPOT Led

MULTi XL

SURfAce MOUNT Led

X SPOT Led

ALUMe SQUARe Led

dARK TRiMLeSS AdjUSTAbLe

UNdeR cAbiNeT Led

ibl Lighting www.ibl.co.uk4 5

Logical Matrix

1.1.0

Accent(1/4)

matrix Key Finishes

part Code desCription mu

lti

Ch

ip l

ed

le

d a

rr

ay

mh

lV dim

ma

bl

e

ad

jus

tab

le

em

er

ge

nC

y

la

mp

po

we

r

la

mp

Co

lou

rt

em

pe

ra

tu

re

la

mp

be

am

w

idt

h

ho

le

C

ut

ou

t (

mm

)

ip2

0

ip4

4

ip6

5

Fin

ish

es

1.2.0 Alume Round Led210X.XXX2 Fixed round Alume with 3 chip LED 6W 2.7K, 3K, 4.5K, 6K 10°, 20°, 35°, 50° 70 10, 20, 50

210X.XXX4 Fixed round Alume with 4 chip LED 8W 2.7K, 3K, 4.5K, 6K 20°, 30°, 40° 70 10, 20, 50

210X.XXX7 Fixed round Alume with 7 chip LED 14W 2.7K, 3K, 4.5K, 6K 20°, 30°, 40° 70 10, 20, 50

210X.XXXb Fixed round Alume with B array LED 9.5W 2.7K, 3K, 4K, 5K 20°, 30°, 40°, 60° 70 10, 20, 50

210X.XXXc Fixed round Alume with C array LED 13W 2.7K, 3K, 4K, 5K 20°, 30°, 40°, 60° 70 10, 20, 50

2100.XX Fixed round Alume LV excl. transformer – – – 70 10, 20, 50

214X.XXX2 Tilt round Alume with 3 chip LED 6W 2.7K, 3K, 4.5K, 6K 10°, 20°, 35°, 50° 82 10, 20, 50

214X.XXX4 Tilt round Alume with 4 chip LED 8W 2.7K, 3K, 4.5K, 6K 20°, 30°, 40° 82 10, 20, 50

214X.XXX7 Tilt round Alume with 7 chip LED 14W 2.7K, 3K, 4.5K, 6K 20°, 30°, 40° 82 10, 20, 50

214X.XXXb Tilt round Alume with B array LED 9.5W 2.7K, 3K, 4K, 5K 20°, 30°, 40°, 60° 82 10, 20, 50

214X.XXXc Tilt round Alume with C array LED 13W 2.7K, 3K, 4K, 5K 20°, 30°, 40°, 60° 82 10, 20, 50

2140.XX Tilt round Alume LV excl. transformer – – – 10, 20, 50

1.2.1 Alume dark Led211X.XXX2 Fixed Dark Alume with 3 chip LED 6W 2.7K, 3K, 4.5K, 6K 20°, 30°, 40° 70 10, 20, 50

211X.XXX4 Fixed Dark Alume with 4 chip LED 8W 2.7K, 3K, 4.5K, 6K 20°, 30°, 40° 70 10, 20, 50

211X.XXX7 Fixed Dark Alume with 7 chip LED 14W 2.7K, 3K, 4.5K, 6K 20°, 30°, 40° 70 10, 20, 50

211X.XXXb Fixed Dark Alume with B array LED 9.5W 2.7K, 3K, 4K, 5K 20°, 30°, 40°, 60° 70 10, 20, 50

211X.XXXc Fixed Dark Alume with C array LED 13W 2.7K, 3K, 4K, 5K 20°, 30°, 40°, 60° 70 10, 20, 50

2110.XX Fixed Dark Alume LV excl. transformer – – 70 10, 20, 50

213X.XXX2 Tilt Dark Alume with 3 chip LED 6W 2.7K, 3K, 4.5K, 6K 20°, 30°, 40° 82 10, 20, 50



213X.XXXb Tilt Dark Alume with B array LED 9.5W 2.7K, 3K, 4K, 5K 20°, 30°, 40°, 60° 82 10, 20, 50

213X.XXXc Tilt Dark Alume with C array LED 13W 2.7K, 3K, 4K, 5K 20°, 30°, 40°, 60° 82 10, 20, 50

2130.XX Tilt Dark Alume LV excl. transformer – – – 82 10, 20, 50

1.2.2 Alume Square Led212X.XXX2 Fixed square Alume with 3 chip LED 6W 2.7K, 3K, 4.5K, 6K 10°, 20°, 35°, 50° 70 10, 20, 50

212X.XXX4 Fixed square Alume with 4 chip LED 8W 2.7K, 3K, 4.5K, 6K 20°, 30°, 40° 70 10, 20, 50

212X.XXX7 Fixed square Alume with 7 chip LED 14W 2.7K, 3K, 4.5K, 6K 20°, 30°, 40° 70 10, 20, 50

212X.XXXb Fixed square Alume with B array LED 9.5W 2.7K, 3K, 4K, 5K 20°, 30°, 40°, 60° 70 10, 20, 50

212X.XXXc Fixed square Alume with C array LED 13W 2.7K, 3K, 4K, 5K 20°, 30°, 40°, 60° 70 10, 20, 50

2120.XX Fixed square Alume LV excl. transformer – – – 70 10, 20, 50

215X.XXX2 Tilt square Alume with 3 chip LED 6W 2.7K, 3K, 4.5K, 6K 10°, 20°, 35°, 50° 82 10, 20, 50

215X.XXX4 Tilt square Alume with 4 chip LED 8W 2.7K, 3K, 4.5K, 6K 20°, 30, 40° 82 10, 20, 50

215X.XXX7 Tilt square Alume with 7 chip LED 14W 2.7K, 3K, 4.5K, 6K 20°, 30°, 40° 82 10, 20, 50

215X.XXXb Tilt square Alume with B array LED 9.5W 2.7K, 3K, 4K, 5K 20°, 30°, 40°, 60° 82 10, 20, 50

215X.XXXc Tilt square Alume with C array LED 13W 2.7K, 3K, 4K, 5K 20°, 30°, 40°, 60° 82 10, 20, 50

2150.XX Tilt square Alume LV excl. transformer – – – 82 10, 20, 50

216X.XXX2 Twin tilt square Alume with 3 chip LED 6W 2.7K, 3K, 4.5K, 6K 10°, 20°, 35°, 50° 159 x 82 10, 20, 50

216X.XXX4 Twin tilt square Alume with 4 chip LED 8W 2.7K, 3K, 4.5K, 6K 20°, 30°, 40° 159 x 82 10, 20, 50

216X.XXX7 Twin tilt square Alume with 7 chip LED 14W 2.7K, 3K, 4.5K, 6K 20°, 30°, 40° 159 x 82 10, 20, 50

216X.XXXb Twin tilt square Alume with B array LED 9.5W 2.7K, 3K, 4K, 5K 20°, 30°, 40°, 60° 159 x 82 10, 20, 50

216X.XXXc Twin tilt square Alume with C array LED 13W 2.7K, 3K, 4K, 5K 20°, 30°, 40°, 60° 159 x 82 10, 20, 50

2160.XX Twin tilt square Alume LV excl. transformer – – – 159 x 82 10, 20, 50

1.3 Alume Miniature Led225X.XXX2 Miniature tilt single chip LED 2W 2.7K, 3K, 4.5K, 6K 20°, 35° 34 10, 20, 50

226X.XXX2 Miniature fixed IP65 single chip LED 2W 2.7K, 3K, 4.5K, 6K 20°, 35° 27 10, 20, 50

Yes Optional

10 White20 Black50 Aluminium70 Silver

ibl Lighting6 www.ibl.co.uk 7

Logical Matrix

1.1.1

Accent(2/4)

matrix Key Finishes Yes Optional



lti

Ch

ip l

ed

le

d a

rr

ay

mh

lV dim

ma

bl

e

ad

jus

tab

le

em

er

ge

nC

y

la

mp

po

we

r

la

mp

Co

lou

rt

em

pe

ra

tu

re

la

mp

be

am

w

idt

h

ho

le

C

ut

ou

t (

mm

)

ip2

0

ip4

4

ip6

5

Fin

ish

es

1.4 wall Led2520.XXXXX Round with array LED 3.3W 2.7K, 3K, 5K – – 10, 20, 50

2530.XXXXX Square with array LED 3.3W 2.7K, 3K, 5K – – 10, 20, 50

254X.XXXXX Recessed round with array LED 3.3W 2.7K, 3K, 5K 136° 56 10, 20, 50

255X.XXXXX Recessed square with array LED 3.3W 2.7K, 3K, 5K 136° 56 10, 20, 50

1.5.0 glass Pin Hole Led231X.XXX3 Glass pin hole with 3 chip LED 6W 2.7K, 3K, 4.5K, 6K 10°, 20°, 35° 72 10, 20

231X.XXX4 Glass pin hole with 4 chip LED 8W 2.7K, 3K, 4.5K, 6K 20°, 30° 72 10, 20

231X.XXX7 Glass pin hole with 7 chip LED 14W 2.7K, 3K, 4.5K, 6K 20°, 30° 72 10, 20

2310.XX Glass pin hole LV excl. transformer – – – 72 10, 20

1.5.1 glass Slot Led232X.XXX3 Glass slot with 3 chip LED 6W 2.7K, 3K, 4.5K, 6K 10°, 20°, 35° 72 10, 20

232X.XXX4 Glass slot with 4 chip LED 8W 2.7K, 3K, 4.5K, 6K 20°, 30° 72 10, 20

232X.XXX7 Glass slot with 7 chip LED 14W 2.7K, 3K, 4.5K, 6K 20°, 30° 72 10, 20

2320.XX Glass slot LV excl. transformer – – – 72 10, 20

1.5.2 glass Round Led233X.XXXb Glass round with B array LED 9.5W 2.7K, 3K, 4K, 5K 20°, 30°, 40°, 60° 70 10, 20

233X.XXXc Glass round with C array LED 13W 2.7K, 3K, 4K, 5K 20°, 30°, 40°, 60° 70 10, 20

1.5.3 glass Square Led234X.XXXb Single square with B array LED 9.5W 2.7K, 3K, 4K, 5K 20°, 30°, 40°, 60° 80 10, 20

234X.XXXc Single square with C array LED 13W 2.7K, 3K, 4K, 5K 20°, 30°, 40°, 60° 80 10, 20

235X.XXXb Twin square with B array LED 9.5W 2.7K, 3K, 4K, 5K 20°, 30°, 40°, 60° 157 x 80 10, 20

235X.XXXc Twin square with C array LED 13W 2.7K, 3K, 4K, 5K 20°, 30°, 40°, 60° 157 x 80 10, 20

1.6.0 dark Pin Hole Led221X.XXX3 Dark pin hole with 3 chip LED 6W 2.7K, 3K, 4.5K, 6K 10°, 20°, 35° 72 10, 20, 70

221X.XXX4 Dark pin hole with 4 chip LED 8W 2.7K, 3K, 4.5K, 6K 20°, 30° 72 10, 20, 70

221X.XXX7 Dark pin hole with 7 chip LED 14W 2.7K, 3K, 4.5K, 6K 20°, 30° 72 10, 20, 70

2210.XX Dark pin hole LV excl. transformer – – – 72 10, 20, 70

1.6.1 dark Slot Led221X.XXX3 Dark slot with 3 chip LED 6W 2.7K, 3K, 4.5K, 6K 10°, 20°, 35° 72 10, 20, 70

222X.XXX4 Dark slot with 4 chip LED 8W 2.7K, 3K, 4.5K, 6K 20°, 30° 72 10, 20, 70

222X.XXX7 Dark slot with 7 chip LED 14W 2.7K, 3K, 4.5K, 6K 20°, 30° 72 10, 20, 70

2220.XX Dark slot LV excl. transformer – – – 72 10, 20, 70

1.6.2 dark Trimless Led224X.XXX3X Fixed trimless with 3 chip LED 6W 2.7K, 3K, 4.5K, 6K 10°, 20°, 35°, 50° 73 10, 20, 70

224X.XXX4X Fixed trimless with 4 chip LED 8W 2.7K, 3K, 4.5K, 6K 20°, 30°, 40° 73 10, 20, 70

224X.XXX7X Fixed trimless with 7 chip LED 14W 2.7K, 3K, 4.5K, 6K 20°, 30°, 40° 73 10, 20, 70

224X.XXXbX Fixed trimless with B array LED 9.5W 2.7K, 3K, 4K, 5K 20°, 30°, 40°, 60° 73 10, 20, 70

224X.XXXcX Fixed trimless with C array LED 13W 2.7K, 3K, 4K, 5K 20°, 30°, 40°, 60° 73 10, 20, 70

2240.XX Fixed trimless LV excl. transformer – – – 73 10, 20, 70

1.6.3 dark Trimless fixed Led227X.XXXb Fixed with B array LED 9.5W 2.7K, 3K, 4K, 5K 20°, 30°, 40°, 60° 97 10, 20, 70

227X.XXXc Fixed with C array LED 13W 2.7K, 3K, 4K, 5K 20°, 30°, 40°, 60° 97 10, 20, 70

2270.XX Fixed LV excl. transformer – – – 97 10, 20, 70

1.6.4 dark Trimless Adjustable Led223X.XXXb Adjustable with B array LED 9.5W 2.7K, 3K, 4K, 5K 20°, 30°, 40°, 60° 97 10, 20, 70

223X.XXXc Adjustable with C array LED 13W 2.7K, 3K, 4K, 5K 20°, 30°, 40°, 60° 97 10, 20, 70

2230.XX Adjustable LV excl. transformer – – – 97 10, 20, 70


1.1

Logical Matrix

1.1.2

Accent(3/4)




lti

Ch

ip l

ed

le

d a

rr

ay

mh

lV dim

ma

bl

e

ad

jus

tab

le

em

er

ge

nC

y

la

mp

po

we

r

la

mp

Co

lou

rt

em

pe

ra

tu

re

la

mp

be

am

w

idt

h

ho

le

C

ut

ou

t (

mm

)

ip2

0

ip4

4

ip6

5

Fin

ish

es

1.7.0 Multi X Led621X.XXX3 Single gimbal with 3 chip LED 6W 2.7K, 3K, 4.5K, 6K 10°, 20°, 35°, 50° 95 x 95 10, 20, 70

621X.XXX4 Single gimbal with 4 chip LED 8W 2.7K, 3K, 4.5K, 6K 20°, 30°, 40° 95 x 95 10, 20, 70

621X.XXX7 Single gimbal with 7 chip LED 14W 2.7K, 3K, 4.5K, 6K 20°, 30°, 40° 95 x 95 10, 20, 70

621X.XXXb Single gimbal with B array LED 9.5W 2.7K, 3K, 4K, 5K 20°, 30°, 40°, 60° 95 x 95 10, 20, 70

621X.XXXc Single gimbal with C array LED 13W 2.7K, 3K, 4K, 5K 20°, 30°, 40°, 60° 95 x 95 10, 20, 70

6210.XX Single gimbal LV excl. transformer – – – 95 x 95 10, 20, 70

622X.XXX3 Twin gimbal with 3 chip LED 2 x 6W 2.7K, 3K, 4.5K, 6K 10°, 20°, 35°, 50° 185 x 95 10, 20, 70

622X.XXX4 Twin gimbal with 4 chip LED 2 x 8W 2.7K, 3K, 4.5K, 6K 20°, 30°, 40° 185 x 95 10, 20, 70

622X.XXX7 Twin gimbal with 7 chip LED 2 X 14W 2.7K, 3K, 4.5K, 6K 20°, 30°, 40° 185 x 95 10, 20, 70

622X.XXXb Twin gimbal with B array LED 2 x 9.5W 2.7K, 3K, 4K, 5K 20°, 30°, 40°, 60° 185 x 95 10, 20, 70

622X.XXXc Twin gimbal with C array LED 2 x 13W 2.7K, 3K, 4K, 5K 20°, 30°, 40°, 60° 185 x 95 10, 20, 70

6220.XX Twin gimbal LV excl. transformer – – – 185 x 95 10, 20, 70

623X.XXX3 Triple gimbal with 3 chip LED 3 x 6W 2.7K, 3K, 4.5K, 6K 10°, 20°, 35°, 50° 275 x 95 10, 20, 70

623X.XXX4 Triple gimbal with 4 chip LED 3 x 8W 2.7K, 3K, 4.5K, 6K 20°, 30°, 40° 275 x 95 10, 20, 70

623X.XXX7 Triple gimbal with 7 chip LED 3 X 14W 2.7K, 3K, 4.5K, 6K 20°, 30°, 40° 275 x 95 10, 20, 70

623X.XXXb Triple gimbal with B array LED 3 x 9.5W 2.7K, 3K, 4K, 5K 20°, 30°, 40°, 60° 275 x 95 10, 20, 70

623X.XXXc Triple gimbal with C array LED 3 x 13W 2.7K, 3K, 4K, 5K 20°, 30°, 40°, 60° 275 x 95 10, 20, 70

6230.XX Triple gimbal LV excl. transformer – – – 275 x 95 10, 20, 70

624X.XXX3 Quad square gimbal with 3 chip LED 4 x 6W 2.7K, 3K, 4.5K, 6K 10°, 20°, 35°, 50° 185 x 185 10, 20, 70

624X.XXX4 Quad square gimbal with 4 chip LED 4 x 8W 2.7K, 3K, 4.5K, 6K 20°, 30°, 40° 185 x 185 10, 20, 70

624X.XXX7 Quad square gimbal with 7 chip LED 4 X 14W 2.7K, 3K, 4.5K, 6K 20°, 30°, 40° 185 x 185 10, 20, 70

624X.XXXb Quad square gimbal with B array LED 4 x 9.5W 2.7K, 3K, 4K, 5K 20°, 30°, 40°, 60° 185 x 185 10, 20, 70

624X.XXXc Quad square gimbal with C array LED 4 x 13W 2.7K, 3K, 4K, 5K 20°, 30°, 40°, 60° 185 x 185 10, 20, 70

6240.XX Quad gimbal LV excl. transformer – – – 185 x 185 10, 20, 70

1.7.1 Multi XL6021.XX Single XL gimbal (excluding head) – – – 165 x 165 10, 70

6022.XX Twin XL gimbal (excluding heads) – – – 325 x 165 10, 70

6023.XX Triple XL gimbal (excluding heads) – – – 485 x 165 10, 70

6024.XX Quad XL gimbal (excluding heads) – – – 645 x 165 10, 70

6025.XX Square XL gimbal (excluding heads) – – – 325 x 325 10, 70


1.1

Logical Matrix

1.1.3

Accent(4/4)




lti

Ch

ip l

ed

le

d a

rr

ay

mh

lV dim

ma

bl

e

ad

jus

tab

le

em

er

ge

nC

y

la

mp

po

we

r

la

mp

Co

lou

rt

em

pe

ra

tu

re

la

mp

be

am

w

idt

h

ho

le

C

ut

ou

t (

mm

)

ip2

0

ip4

4

ip6

5

Fin

ish

es

1.8 flute Spot Led24XX.XXX3X Single head with 3 chip LED 6W 2.7K, 3K, 4.5K, 6K 10°, 20°, 35°, 50° – 10, 20, 70

24XX.XXX4X Single head with 4 chip LED 8W 2.7K, 3K, 4.5K, 6K 20°, 30°, 40° – 10, 20, 70

24XX.XXXbX Single head with 7 chip LED 14W 2.7K, 3K, 4.5K, 6K 20°, 30°, 40° – 10, 20, 70

24XX.XXXcX Single head with B array LED 9.5W 2.7K, 3K, 4K, 5K 20°, 30°, 40°, 60° 10, 20, 70

24XX.XXX7X Single head with C array LED 13W 2.7K, 3K, 4K, 5K 20°, 30°, 40°, 60° 10, 20, 70

24XX.XXX3X Twin head with 3 chip LED 2 x 6W 2.7K, 3K, 4.5K, 6K 10°, 20°, 35°, 50° – 10, 20, 70

24XX.XXX4X Twin head with 4 chip LED 2 x 8W 2.7K, 3K, 4.5K, 6K 20°, 30°, 40° – 10, 20, 70

24XX.XXXbX Twin head with B array LED 2 x 9.5W 2.7K, 3K, 4K, 5K 20°, 30°, 40°, 60° 10, 20, 70

24XX.XXXcX Twin head with C array LED 2 x 13W 2.7K, 3K, 4K, 5K 20°, 30°, 40°, 60° 10, 20, 70

1.9 X Spot Led248X.XXX3X 3 Chip surface or track mounted 6W 2.7K, 3K, 4.5K, 6K 10°, 20°, 35°, 50° – 10, 20, 70

248X.XXX4X 4 Chip surface or track mounted 8W 2.7K, 3K, 4.5K, 6K 20°, 30°, 40° – 10, 20, 70

2480.XX LV surface or track mounted – – – – 10, 20, 70

1.10 Surface Mount XL & XXL Led245X.XXXb Surface mount XL with B array LED 9.5W 2.7K, 3K, 4K, 5K 20°, 30°, 40°, 60° 10, 20, 70

245X.XXXc Surface mount XL with C array LED 13W 2.7K, 3K, 4K, 5K 20°, 30°, 40°, 60° 10, 20, 70

246X.XXXd35 Surface mount XXL with D array LED 12W 2.7K, 3K, 4K, 5K 20°, 35°, 50°, 70° 10, 20, 70



1.11 Surface Mount Led256X.XXXXX Round with array LED 5W 2.7K, 3K, 5K 15°, 30°, 40° – 10, 50

257X.XXXXX Square with array LED 5W 2.7K, 3K, 5K 15°, 30°, 40° – 10, 50

258X.XXXXX Cone with array LED 5W 2.7K, 3K, 5K 15°, 30°, 40° – 10, 50

1.12 Under cabinet Led2501.XXXXX Round with array LED 3.3W 2.7K, 3K, 5K 130° – 10, 50

2502.XXXXX Square with array LED 3.3W 2.7K, 3K, 5K 130° – 10, 50


Accent

1.1

lamp

LED Module

speCiFiCations

Alume Round LED

1.2.0

dimensions (mm) 210X 214XDepth (d) Minimum of 25mm clearance required

3 Chip 70 70 4 Chip 76 76 7 Chip 85 85 B Array 78 78 C Array 93 93Cutout Ø70 Ø82Bezel Ø80 Ø90Ingress IP44 IP20Anti glare Removable 10mm anti glare baffle fitted as standard (3 & 4 Chip versions only)

dRiVeR Type Remote Constant currentElectrical safety Class IIOutput isolation S.E.L.V.

Led eNgiNe Please refer to section 6 for technical data

LED 3, 4 & 7 Chip & Array versionsCCT Multi Chip 2700°K, 3000°K, 4500°K & 6000°K Array 2700°K, 3000°K, 4000°K & 5000°K

OPTicS3 Chip Spot 10°, Narrow 20°, Medium 35° & Wide 50°4 & 7 Chip Narrow 20°, Medium 30° & Wide 40°Array Narrow 20°, Medium 30°, Wide 40° & Flood 60°

OPTiONSLED Xicato LED engine available upon request High CRI array engines available across all colour temperatures (typical 95Ra) add 9 to the end of the suffix, i.e.2101.531C9Emergency For 3Hr emergency version add the suffix E3, e.g. 2105.1322 E3LV MR16 Version Also available as LV MR16, Part code: 2100.X0 / 2140.X0 (X denotes finish) Excludes transformer & lamp

part Codes To order, quote model code, then options, separated by a period (.); e.g. 2101.5322

model optiCs Finish led CCt driVer Version

210 Fixed214 Tilt

3 cHiP1 Spot (10°)2 Narrow (20°)3 Medium (35°)5 Wide (50°)

4 & 7 cHiP/ARRAy2 Narrow (20°)3 Medium (30°)4 Wide (40°)6 Flood (60°)*

1 White2 Black5 Aluminium

MULTi cHiP2 2700°K3 3000°K4 4500°K6 6000°K

ARRAy2 2700°K3 3000°K4 4000°K5 5000°K

1 Non-dimming2 Phase dimming3 1-10V Dimming4 DALI Dimming

MULTi cHiP2 3 Chip4 4 Chip7 7 Chip

ARRAyb 9.5Wc 13W

.

Cutout

dimensions (mm)

Ø82 20° TILT

Ø70

210X

Cutout214X

Ø80

Ø90

d

d

Lighting design: Normaliteconcept design: john Hoyle designdevelopment design: Lime blueManufacturing: Task displaysProject Management & Planning: clarins UK

*60° optics available in array version only

ibl Lighting 14 www.ibl.co.uk 15

Accent

1.1 1.2.1

lamp

LED Module

speCiFiCations

Alume Dark LED


Cutout

dimensions (mm)

Ø82 20° TILT

Ø70

211X

Cutout213X

Ø80

Ø90

d

d


211 Fixed213 Tilt

MULTi cHiP2 Narrow (20°)3 Medium (30°)4 Wide (40°)

ARRAy2 Narrow (20°)3 Medium (30°)4 Wide (40°)6 Flood (60°)*


MULTi cHiP2 2700°K3 3000°K4 4500°K6 6000°K

ARRAy2 2700°K3 3000°K4 4000°K5 5000°K


MULTi cHiP2 3 Chip 4 4 Chip7 7 Chip

ARRAyb 9.5Wc 13W

.


3 Chip 60 60 4 Chip 66 66 7 Chip 85 85 B Array 78 78 C Array 93 93Cutout Ø70 Ø82Bezel Ø80 Ø90Ingress IP44 IP20Anti glare Removable 10mm anti glare baffle fitted as standard (3 & 4 Chip versions only)



LED 3,4 & 7 Chip & Array versionsCCT Multi Chip 2700°K, 3000°K, 4500°K & 6000°K Array 2700°K, 3000°K, 4000°K & 5000°K

OPTicS3,4 & 7 Chip Narrow 20°, Medium 30° & Wide 40°Array Narrow 20°, Medium 30°, Wide 40° & Flood 60°

OPTiONSLED Xicato LED engine available upon request High CRI array engines available across all colour temperatures (typical 95Ra) add 9 to the end of the suffix, i.e.2131.531B9Emergency For 3Hr emergency version add the suffix E3, e.g. 2135.1322 E3LV MR16 Version Also available as LV MR16, Part code: 2110.X0 / 2130.X0 (X denotes finish) Excludes transformer & lamp

Lighting design: NormaliteProject Management: Ragdale Hall



Accent

1.2.2

Alume Square LED

lamp

LED Module

speCiFiCations


Cutout

dimensions (mm)

Ø70

212X

80

d


212 Fixed 3 cHiP1 Spot (10°)2 Narrow (20°)3 Medium (35°)5 Wide (50°)



MULTi cHiP2 2700°K3 3000°K4 4500°K6 6000°K

ARRAy2 2700°K3 3000°K4 4000°K5 5000°K



ARRAyb 9.5Wc 13W

.

dimensions (mm) 212X Depth (d) Minimum of 25mm clearance required

3 Chip 70 4 Chip 76 7 Chip 85 B Array 78 C Array 93 Cutout Ø70 Bezel 80 Ingress IP44 Anti glare Removable 10mm anti glare baffle fitted as standard (3 & 4 Chip versions only)





OPTiONSLED Xicato LED engine available upon request High CRI array engines available across all colour temperatures (typical 95Ra) add 9 to the end of the suffix, i.e.2121.531B9Emergency For 3Hr emergency version add the suffix E3, e.g. 2125.1322 E3LV MR16 Version Also available as LV MR16, Part code: 2120.X0 (X denotes finish) Excludes transformer & lamp

lamp

LED Module

speCiFiCations


Cutout

dimensions (mm)

Ø82

215X

d

20° TILT

Cutout159 X 82 20° TILT

216X

d

90

173

90


215 1xTilt216 2xTilt




MULTi cHiP2 2700°K3 3000°K4 4500°K6 6000°K

ARRAy2 2700°K3 3000°K4 4000°K5 5000°K



ARRAyb 9.5Wc 13W

.


3 Chip 70 70 4 Chip 76 76 7 Chip 85 85 B Array 78 78 C Array 93 93Cutout Ø82 159x82Bezel 90 173x90Ingress IP20 IP20Anti glare Removable 10mm anti glare baffle fitted as standard (3 & 4 Chip versions only)





OPTiONSLED Xicato LED engine available upon request High CRI array engines available across all colour temperatures (typical 95Ra) add 9 to the end of the suffix, i.e.2151.531B9Emergency For 3Hr emergency version add the suffix E3, e.g. 2155.1322 E3LV MR16 Version Also available as LV MR16, Part code: 2150.X0 / 2150.X0 (X denotes finish) Excludes transformer & lamp

*60° optics available in array version only *60° optics available in array version only


Accent

1.3

Alume Miniature LED

lamp

LED Module

speCiFiCations

dimensions (mm) 225X 226XDepth 38 40Cutout Ø37 Ø27Bezel Ø40 Ø35Ingress IP20 IP65

dRiVeRType Remote Constant current Multiple Miniature LEDs can be run from a single driver. Please see section 5 for LED drivers and accessories.Electrical safety Class IIOutput isolation S.E.L.V.

Led eNgiNe LED 1 ChipPower 2WForward current Max. 700mACCT 2700°K, 3000°K

OPTicS1 Chip Narrow 20° & Medium 35°



226 Fixed225 Tilt

2 Narrow (20°)3 Medium (35°)


2 2700°K3 3000°K4 4500°K6 6000°K

1 Non-dimming2 Phase dimming3 1-10V Dimming4 DALI DimmingX Not included

2 1 Chip

.

Cutout

dimensions (mm)

Ø34

225X

Ø35

40

CutoutØ27

25° TILT

226X

Ø40

38

AcceSSORieScOwL fLUTe

225X – TiLT 2250.X1 2250.X2226X – fiXed 2260.X1 2260.X2

STRAigHT SQUARe

226X – fiXed 2260.X3 2260.X4

crown Spa, crown casino MelbourneLighting designer: dj coalition, Australia


Accent

1.4

Wall LED

lamp

LED Module

speCiFiCations

part Codes To order, quote model code, then options, separated by a period (.); e.g. 2540.13M30

model Finish led CCt supply Version ip rating

MOUNTed2520 Round2530 Square

ReceSSed2540 Round with oval aperture2547 Round with slit aperture2548 Round with wide aperture2550 Square with oval aperture2558 Square with wide aperture


2 2700°K 3 3000°K5 5000°K

M Mains 3 3.3W 0 IP206 IP65*

.

dimensions (mm) Surface MountDepth 26 Bezel 65 Ingress IP20

RecessedDepth 42Cutout Ø56Bezel 65Ingress IP20 & IP65* versions

Electrical safety Class II

Led eNgiNe Type Mains – Non dimmablePower 3.3WInput 220-240VAC 50/60HzCCT 2700°K, 3000°K & 5000°KOptics Tilted, ultra wide angle (136°)

*IP65 version only available in recessed model

dimensions (mm)

252X 253X

65

Cutout

2540 2550

Ø56

65

65

42

26

2547 2558

65

2548

65


Accent

1.5.0

Glass Pin Hole LEDlamp

LED Module

speCiFiCations


model Finish led CCt driVer Version

3 cHiP2311 Spot (10°)2312 Narrow (20°)2313 Medium (35°)

4 & 7 cHiP2312 Narrow (20°)2313 Medium (30°)

1 White2 Black

2 2700°K3 3000°K4 4500°K6 6000°K


2 3 Chip4 4 Chip7 7 Chip

.

Cutout

dimensions (mm)

Ø72

Ø88

ddimensions (mm) Depth (d) Minimum of 25mm clearance required

3 Chip 80 4 Chip 86 7 Chip 105 Cutout Ø72 Bezel Ø88 Ingress IP65



LED 3, 4 & 7 Chip versionsCCT 2700°K, 3000°K, 4500°K

& 6000°K

OPTicS3 Chip Spot 10°, Narrow 20° &

Medium 35°4 & 7 Chip Narrow 20° & Medium 30°

OPTiONSEmergency For 3Hr emergency version

add the suffix E3, e.g. 2315.2324 E3

LV MR16 Version Also available as LV MR16, Part code: 2310.X0 (X denotes finish)

Excludes transformer & lamp

lamp

LED Module

speCiFiCations


Cutout

dimensions (mm)

Ø72

Ø88

d



4 & 7 cHiP2322 Narrow (20°)2323 Medium (30°)

1 White2 Black

2 2700°K3 3000°K4 4500°K6 6000°K



.

dimensions (mm) Depth (d) Minimum of 25mm clearance required

3 Chip 80 4 Chip 86 7 Chip 105 Cutout Ø72 Bezel Ø88 Ingress IP65Adjustability Internally adjustable 45°


Led eNgiNe Please refer to section 6 for technical

data


& 6000°K

OPTicS3 Chip Spot 10°, Narrow 20° &

Medium 35°4 & 7 Chip Narrow 20° & Medium 30°





Glass SlotLED

1.5.1

45° TILT


Accent

1.5.2

GlassRound LEDlamp

LED Module

speCiFiCations

part Codes To order, quote model code, then options, separated by a period (.); e.g. 2334.231B

Cutout

dimensions (mm)

Ø70

Ø85

d


2332 Narrow (20°)2333 Medium (30°)2334 Wide (40°)2336 Flood (60°)

1 White2 Black

2 2700°K3 3000°K4 4000°K5 5000°K


b 9.5Wc 13W

.


B Array 75 C Array 90 Cutout Ø70 Bezel Ø85 Ingress IP65



LED ArrayCCT 2700°K, 3000°K, 4000°K

& 5000°K

OPTicSArray Narrow 20°, Medium 30°,

Wide 40° & Flood 60°

OPTiONSLED Xicato LED engine available

upon request High CRI array engines

available across all colour temperatures (typical 95Ra) add 9 to the end of the suffix, i.e. 2334.231B9

Emergency For 3Hr emergency version add the suffix E3, e.g. 2334.231B E3

1.5.3

Glass Square LEDlamp

LED Module

speCiFiCations


Cutout

dimensions (mm)

Ø80

234X

175 X 90

90

Cutout157 X 80

235X

d

d

90


SiNgLe2342 Narrow (20°)2343 Medium (30°)2344 Wide (40°)2346 Flood (60°)

TwiN2352 Narrow (20°)2353 Medium (30°)2354 Wide (40°)2356 Flood (60°)

1 White2 Black

2 2700°K3 3000°K4 4000°K5 5000°K


b 9.5Wc 13W

.

dimensions (mm) 234X 235X Depth (d) Minimum of 25mm clearance required

B Array 75 75 C Array 90 90Cutout Ø80 157 x 80Bezel 90 175 x 90 Ingress IP65 IP65



LED ArrayCCT 2700°K, 3000°K, 4000°K & 5000°K

OPTicSArray Narrow 20°, Medium 30°, Wide 40° & Flood 60°



available across all colour temperatures (typical 95Ra) add 9 to the end of the suffix, i.e. 2345.231B9

Emergency For 3Hr emergency version add the suffix E3, e.g. 2345.231B E3


Accent

Dark Pin Hole LED

1.6.0

lamp

LED Module

speCiFiCations


Cutout

dimensions (mm)

Ø72

Ø87


3 Chip 80 4 Chip 86 7 Chip 105 Cutout Ø72 Bezel Ø87 Ingress IP20 as standard IP65 add 6 to the part code e.g. 2212.23246




& 6000°K

OPTicS3 Chip Spot 10°, Narrow 20°

& Medium 35°4 & 7 Chip Narrow 20° & Medium 30°



LV MR16 Version Also available as LV MR16, Part code: 2210.X0 (X denotes finish). Excludes transformer & lamp

crowne Plaza Kowloon, Hong KongLighting designer: Light directions, Hong Kong.



4 & 7 cHiP 2212 Narrow (20°)2213 Medium (30°)

1 White2 Black7 Silver

2 2700°K3 3000°K4 4500°K6 6000°K



.


Accent

Dark Slot LED

1.6.1

lamp

LED Module

speCiFiCations


Cutout

dimensions (mm)

Ø72

Ø87


3 Chip 80 4 Chip 86 7 Chip 105 Cutout Ø72 Bezel Ø87 Ingress IP20 as standard IP65 add 6 to the part code e.g. 2222.23246Adjustability Internally adjustable




& 6000°K

OPTicS3 Chip Spot 10°, Narrow 20°

& Medium 35°4 & 7 Chip Narrow 20° & Medium 30°



LV MR16 Version Also available as LV MR16, Part code: 2220.X0 (X denotes finish) Excludes transformer & lamp




4 & 7 cHiP 2222 Narrow (20°)2223 Medium (30°)


2 2700°K3 3000°K4 4500°K6 6000°K



.

45° TILT


Accent

Dark Trimless LED

1.6.2

lamp

LED Module

speCiFiCations


Cutout

dimensions (mm)

Ø73d

Ø82

model Finish led CCt driVer Version ip rating




MULTi cHiP2 2700°K3 3000°K4 4500°K6 6000°K

ARRAy2 2700°K3 3000°K4 4000°K5 5000°K



ARRAyb 9.5Wc 13W

iP204 IP446 IP65

.


3 Chip 99 4 Chip 105 7 Chip 125 B Array 117 C Array 132Cutout Ø73 Bezel Ø82 Ingress IP20, IP44 & IP65 versions




OPTicS3 Chip Spot 10°, Narrow 20°, Medium 35° & Wide 50°4 & 7 Chip Narrow 20°, Medium 30° & Wide 40°Array Narrow 20°, Medium 30°, Wide 40° & Flood 60

OPTiONSLED Xicato LED engine available upon request High CRI array engines available across all colour temperatures (typical 95Ra) add 9 to the end of the suffix, i.e. 2245.232449 Emergency For 3Hr emergency version add the suffix E3, e.g. 2245.23244 E3LV MR16 Version Also available as LV MR16, Part code: 2240.X0 (X denotes finish) Excludes transformer & lamp



Accent

1.6.3

Dark Trimless Fixed LEDlamp

LED Module

speCiFiCations

part Codes To order, quote model code, then options, separated by a period (.); e.g. 2273.231C

Cutout

dimensions (mm)

Ø97

d

Ø108

model bezel Finish led CCt driVer Version



2 2700°K3 3000°K4 4000°K5 5000°K


b 9.5Wc 13W

.

dimensions (mm) Depth (d) Minimum of 25mm clearance required B Array 124 C Array 139Cutout Ø97 Bezel Ø108 Ingress IP20Reflector White supplied as standard




& 5000°K





available across all colour temperatures (typical 95Ra) add 9 to the end of the suffix, i.e.2273.231C9

Emergency For 3Hr emergency version add the suffix E3, e.g. 2273.231C E3



Reflector White supplied as standard. Options: Black-BK, Silver-SV & Chrome-CH i.e. 2273.231C CH

White Black

Silver Chrome

1.6.4

lamp

LED Module

speCiFiCations

Dark Trimless Adjustable LED

part Codes To order, quote model code, then options, separated by a period (.); e.g. 2233.231C

Cutout

dimensions (mm)

Ø97

Ø108

d

model bezel Finish led CCt driVer Version



2 2700°K3 3000°K4 4000°K5 5000°K


b 9.5Wc 13W

.

dimensions (mm) Depth (d) Minimum of 25mm clearance required B Array 124 C Array 139Cutout Ø97 Bezel Ø108 Ingress IP20Reflector White supplied as standardAdjustability Internally adjustable 35°




& 5000°K





available across all colour temperatures (typical 95Ra) add 9 to the end of the suffix, i.e. 2233.231C9

Emergency For 3Hr emergency version add the suffix E3, e.g. 2233.231C E3



35° TILT


Accent

Multi X LED

1.7.0

lamp

LED Module

speCiFiCations



621 Single622 Twin623 Triple624 Quad




MULTi cHiP2 2700°K3 3000°K4 4500°K6 6000°K

ARRAy2 2700°K3 3000°K4 4000°K5 5000°K



ARRAyb 9.5Wc 13W

.

dimensions (mm) Depth (d) 3,4 Chip & B Array 100 7 chip c ArraySingle, Twin & Triple 78 86Quad 103 103Ingress IP20



LED 3 & 4 Chip & Array versionsCCT Multi Chip 2700°K, 3000°K, 4500°K

& 6000°K Array 2700°K, 3000°K, 4000°K

& 5000°K


OPTiONSLED Xicato LED engine available upon request High CRI array engines available across all colour temperatures (typical 95Ra) add 9 to the end of the suffix, i.e.6222.732B9Emergency For 3Hr emergency version add the suffix E3, e.g. 6222.7322 E3LV MR16 Version Also available as LV MR16, Part code: 6220.X0 (X denotes finish) Excludes transformer & lamp


110

110

201

110

292

110

202

202

d

95 X 95Cutout

dimensions (mm)

SiNgLe

185 X 95CutoutTwiN

275 X 95CutoutTRiPLe

185 X 185CutoutQUAd

d

7 CHIP & C ARRAY

3, 4 CHIP & B ARRAY


Accent

Multi XL

1.7.1

lamp

Various

speCiFiCations


190

190

200

170 X 170Cutout

dimensions (mm)

SiNgLe

357

190

337 X 170CutoutTwiN

525

190

505 X 170CutoutTRiPLe

690

190

670 X 170CutoutQUAd

357

357

337 X 337CutoutSQUARe

Ingress IP20Housing SteelFinish White (.10) & Silver (.70)

dRiVeR Type Remote

LAMP Type CDM-T, AR111, CDM-R111, CDM-TC & CDM-R Par 30 versions

ORdeRiNg iNfORMATiONTo order, first select housing then select the corresponding number of heads, e.g. 1x6023.10 + 3x6034.10Transformer/Ballast must be ordered separately

model (housing) Finish model (heads) Finish

6021 Single6022 Twin6023 Triple6024 Quad6025 Quad Square

10 White70 Silver

6031 1x70W CDM-T6032 1x75W AR1116033 1x35W CDM-R1116034 1xCDM-TC6035 1x70W CDM-R Par 30

10 White70 Silver

.


2401.XX 10mm light baffle

Accent

lamp

LED Module

speCiFiCations

Flute Spot LED

1.8

ROUNd

105 43

130

dimensions (mm)

model optiCs Finish led CCt driVer Version mounting

ROUNd241 Single242 Twin

SQUARe243 Single244 Twin


4 & 7 cHiP/ARRAy2 Narrow (20°)3 Medium (30°)4 Wide (40°)6 Flood (60°)**


MULTi cHiP2 2700°K3 3000°K4 4500°K6 6000°K

ARRAy2 2700°K3 3000°K4 4000°K5 5000°K

1 Non-dimming2 Phase dimming3 1-10V Dimming*

4 DALI Dimming*

1-10V & DALI Dimming available in single head only, requires control track mounting

MULTi cHiP2 3 Chip4 4 Chip7 7 Chip*

ARRAyb 9.5Wc 13W

1 Surface mounted2 Single circuit 3 Multi circuit4 Control

track*

.

aCCessories Finish

2401 10mm light baffle2404 25mm light baffle*2406 Honeycomb louvre


.

*Available in single head model only** 60° optics available in array version only


Electrical safety Class IIOutput isolation S.E.L.V.Ingress IP20

dRiVeR Type Integral Constant currentOutput isolation S.E.L.V.


LED 3 & 4 Chip & Array versionsCCT Multi Chip 2700°K, 3000°K, 4500°K

& 6000°K Array 2700°K, 3000°K, 4000°K

& 5000°K



AcceSSORieS

2404.XX 50mm light baffle

2406.XX Honeycomb louvre

* Available with white exterior finish and black interior; Part code 2404.12

10

50

SQUARe

82 40

120


Accent

X Spot LED

1.9

lamp

LED Module

speCiFiCations

Mounting Surface mount or trackDriver Surface mount – Remote Track – IntegralIngress IP20



LED 3, 4 Chip versionsCCT 2700°K, 3000°K, 4500°K

& 6000°K

OPTicS3 Chip Spot 10°, Narrow 20°, Medium 35° & Wide 50°4 Chip Narrow 20°, Medium 30° & Wide 40°

OPTiONSLV MR16 Version Also available as LV MR16, Part code: 2480.X0 (X denotes finish) Excludes transformer & lamp

dimensions (mm)

SURfAce MOUNT

TRAcK

Ø6035

135

200

155


model Finish led CCt driVer Version mounting


4 cHiP2482 Narrow (20°)2483 Medium (30°)2484 Wide (40°)


2 2700°K3 3000°K4 4500°K6 6000°K

1 Non-dimming2 Phase dimming3 1-10V Dimming*

4 DALI Dimming*

2 3 Chip4 4 Chip

1 Surface mounted3 Multi circuit mains track

.*Available in surface mounted model only


Accent

1.10

Surface Mount XL & XXL LEDlamp

LED Module

speCiFiCations

dimensions (mm) 245X 246XHeight (h) 170 200Bezel (B) Ø95 140Ingress IP20 as standard IP65 add 6 to the part code e.g. 2453.132B6Baffle Colour matched baffle supplied as standard. For a black baffle suffix with BL e.g. 2453.132B BL

dRiVeR Type Integral Constant currentElectrical safety Class IIOutput isolation S.E.L.V.

Led eNgiNe LED Array245XForward current 250mA 350mA Power 9.5W 13W Lumens 680lm 1070lm246XForward current 350mA 550mA 700mA Power 12W 20W 26W Lumens 1200lm 1750lm 2100lm

CCT 2700°K, 3000°K, 4000°K & 5000°K

OPTicS 245X – Narrow 20°, Medium 30°, Wide 40° & Flood 60° 246X – Narrow 20°, Medium 35°, Wide 50° & Flood 70°

part Codes To order, quote model code, then options, separated by a period (.); e.g. 2456.132D55

dimensions (mm)

h

xxl model Finish led CCt driVer Version power



2 2700°K3 3000°K4 4000°K5 5000°K


d Array 35 350mA55 550mA70 700mA

.

Øb


xl model Finish led CCt driVer Version



2 2700°K3 3000°K4 4000°K5 5000°K

1 Non-dimming2 Phase dimming3 1-10V Dimming

b 9.5Wc 13W

.

aCCessories Finish

2450 Pendant 10 White20 Black70 Silver


Accent

1.11

SurfaceMount LEDlamp

LED Module

speCiFiCations

Height 32mmBezel 63mmIngress IP20 & IP44

Led eNgiNe Type Mains – Non dimmablePower 5WOutput 310lmInput 110-240VAC 50/60HzCCT 2700°K, 3000°K & 5000°KOptics 15°, 30° & 40°


model optiCs Finish led CCt supply Version ip rating

256 Round257 Square258 Cone

1 15°3 30°4 40°

1 White5 Aluminium

2 2700°K 3 3000°K5 5000°K

M Mains 5 5W 0 IP204 IP44

.

dimensions (mm)

256X

257X

258X

32

63 63

63 63

32

63 63

32

1.12

Under Cabinet LEDlamp

LED Module

speCiFiCations

Height 15mmBezel 63mmIngress IP20 & IP44

Led eNgiNe Type Mains – Non dimmablePower 3.3WOutput 220lmInput 110-240VAC 50/60HzCCT 2700°K, 3000°K & 5000°KOptics Ultra wide 130°

dimensions (mm)dimensions (mm)

2501 2502

63

15

63


model Finish led CCt supply Version ip rating

2501 Round 130°2502 Square 130°

1 White5 Aluminium

2 2700°K 3 3000°K5 5000°K

M Mains 3 3.3W 0 IP204 IP44

.


2.0

this is a range of self–contained recessed luminaries incorporating efficient, regulated integral driver technology that offers a complete low energy lighting solution.

with features such as advanced thermal management, efficient optic design high output lED, the EcoSeal collection is fire rated, acoustically rated and sealed in an energy efficient housing. they are designed for use in:

• Multi storey buildings • Residential developments • Hallways and corridors • Bathrooms • Open ceiling spaces • Acoustic ceilings

ECOSealALUMe SQUARe Led

ALUMe ROUNd Led

NANOMicROMiNi

ALUMe eLV

TiLT Led

eLV

fiXed / iP65 Led

ibL Lighting has achieved compliance with current building regulations relating to fire, acoustic, airtightness and moisture transfer, without the use of intumescent material normally associated with this type of product.

Fire ratingfire Resistant to bS476:Pt.21 60mins.Precautionary measures that are necessary to provide safety from fire that will safeguard building occupants.

air tightnessAir tightness to bS5250.Unbroken air barrier next to the insulation and protection against moisture penetrating roof space.

aCoustiC ratingbS 5450 bS eN iSO 140–3&–6Acoustically rated to Robust details Part e appendix f. Resistance to the passage of sound.

ConserVation oF Fuel and powerenergy performance requirements – energy consumed by lighting installations must meet new criteria and have laid down standards of performance in relationship to light provided to the power consumed (lm/w).

saFe eleCtriCal installationsTo ensure safety in all electrical installations. Luminaire’s installed in accordance with relevant wiring and building regulations together with manufactures written installation instructions. bS eN iSO9001:2000 accreditation 2


Logical Matrix

ecOSeal

2.1

part Code desCription le

d

CF

l

lV 60

min

s

Fir

e r

at

ing

aC

ou

st

iC

ra

tin

g

dim

ma

bl

e

ad

jus

tab

le

la

mp

ty

pe

la

mp

po

we

r

re

sid

en

tia

l

& C

om

me

rC

ial

b

uil

din

g ‘l

’ C

om

pl

ian

Ce

inp

ut

su

pp

ly

ip4

4

ip6

5

ho

le

C

ut

ou

t (

mm

)

Fin

ish

es

2.2 ecOSeal Alume Led115X.XXX2 Fixed Alume with 3 chip LED LED Module 6W 220–240VAC 73 10, 50

116X.XXX2 Tilt Alume with 3 chip LED LED Module 6W 220–240VAC 86 10, 50

118X.XXX2 Fixed Alume with 3 chip LED LED Module 6W 220–240VAC 73 10, 50

117X.XXX2 Tilt Alume with 3 chip LED LED Module 6W 220–240VAC 86 10, 50

2.3.0 ecOSeal Led fixed112X.XXX2 Fixed downlight with 3 chip LED LED Module 6W 220–240VAC 73 10, 40, 90

113X.XXX2 Tilt downlight with 3 chip LED LED Module 6W 220–240VAC 86 10, 40, 90

119X.XXX2 Fixed IP65 downlight with 3 chip LED LED Module 6W 220–240VAC 73 10, 40, 90

1137.XXX2 Fixed downlight with floating glass & 3 chip LED LED Module 6W 220–240VAC 73 10, 40, 90

1139.XXX2 Fixed IP65 downlight with glass bezel & 3 chip LED LED Module 6W 220–240VAC 73 10, 40, 90

2.3.1 ecOSeal Led Tilt1131.XXXX 10° c/w integral driver LED Module 6W 220–240VAC 86 10, 40, 90

2.4 ecOSeal Mini1116.10 13W c/w integral ballast CFL 13W 230–240VAC 86 10

1117.10 18W c/w integral ballast CFL 18W 230–240VAC 86 10

2.5 ecOSeal Micro1110.10 10/11W c/w integral ballast CFL 10/11W 230–240VAC 86 10

2.6 ecOSeal Nano1100.XX 10/11W c/w integral ballast CFL 10/11W 230–240VAC 73 10, 20, 30, 40, 50, 90

1127.XX 10/11W c/w integral ballast & floating glass bezel CFL 10/11W 230–240VAC 73 10, 20, 30, 40, 50, 90

1129.XX 10/11W c/w integral ballast & IP65 glass bezel CFL 10/11W 230–240VAC 73 10, 20, 30, 40, 50, 90

1129.XXfR 10/11W c/w integral ballast & frosted IP65 glass bezel CFL 10/11W 230–240VAC 73 10, 20, 30, 40, 50, 90

2.7 ecOSeal Alume eLV

1000.XX Fixed round downlight c/w integral transformer MR16 LV aluminium reflector 35W 230–240VAC 73 10, 50

1004.XX Tilt round downlight c/w integral transformer MR16 LV aluminium reflector 35W 230–240VAC 86 10, 50

1001.XX Fixed square downlight c/w integral transformer MR16 LV aluminium reflector 35W 230–240VAC 73 10, 50

1005.XX Tilt square downlight c/w integral transformer MR16 LV aluminium reflector 35W 230–240VAC 86 10, 50

2.8 ecOSeal eLV

1024.XX Fixed Downlight c/w integral transformer MR16 LV aluminium reflector 35W 230–240VAC 73 10, 20, 30, 40, 90

1034.XX Tilt Downlight c/w integral transformer MR16 LV aluminium reflector 35W 230–240VAC 86 10, 20, 30, 40, 90

1094.XX IP65 Downlight c/w integral transformer MR16 LV aluminium reflector 35W 230–240VAC 73 10, 20, 30, 40, 90

*(See accessories for other finishes)


10 White20 Black30 Brass

40 Chrome50 Aluminium70 Silver90 Satin Chrome


ecOSeal

2.2

ECOSeal Alume LED

lamp

LED Module

speCiFiCations



ROUNd115 Fixed116 Tilt

SQUARe118 Fixed117 Tilt

1 Spot (10°)2 Narrow (20°)3 Medium (35°)5 Wide (50°)

1 White5 Aluminium

2 2700°K3 3000°K4 4500°K6 6000°K


2 3 Chip

.

Cutout

dimensions (mm)

Ø86 20° TILT

Ø73

115X

Cutout116X

87

Ø96

105

105

dimensions (mm) 115X 116XDepth 105 105Cutout Ø73 Ø86Bezel Ø87 Ø96Ingress IP44 IP20

dimensions (mm) 118X 117XDepth 115 115Cutout Ø73 Ø86Bezel 87 96Ingress IP44 IP20

Anti glare Removable 10mm anti glare baffle fitted as standardFire rating 60min rating when installed in a 60min fire rated ceiling.



LED 3 ChipCCT 2700°K, 3000°K, 4500°K & 6000°K

OPTicS3 Chip Spot 10°, Narrow 20°, Medium 35° & Wide 50°

OPTiONSEmergency For 3Hr emergency version add the suffix E3, e.g. 1165.1322 E3

Cutout

Ø86 20° TILT

Ø73

118X

Cutout117X

87

96

105

105


ecOSeal

ECOSeal Fixed LED

2.3.0

lamp

LED Module

speCiFiCations



fiXed1121 Spot (10°)1122 Narrow (20°)1123 Medium (35°)1125 Wide (50°)

fiXed iP651191 Spot (10°)1192 Narrow (20°)1193 Medium (35°)1195 Wide (50°)

fLOATiNg gLASS bezeL1137 Wide (50°)

iP65 gLASS bezeL1139 Wide (50°)

1 White4 Chrome9 Satin Chrome

2 2700°K3 3000°K4 4500°K6 6000°K


2 3 Chip

.

dimensions (mm) Depth 105Cutout Ø73Bezel 112X, 1137, 1139: Ø86 119X : Ø82Ingress 112X, 1137 : IP44 1139, 119X : IP65

Fire rating 60min rating when installed in a 60min fire rated ceiling.



LED 3 ChipCCT 2700°K, 3000°K, 4500°K & 6000°K



Cutout

dimensions (mm)

Ø73

112X

86

105

119X

82

105

1137

86

105

1139

86

105


ecOSeal

ECOSeal Tilt LED

2.3.1

lamp

LED Module

speCiFiCations



1131 Spot (10°)1132 Narrow (20°)1133 Medium (35°)1135 Wide (50°)

1 White4 Chrome9 Satin Chrome

2 2700°K3 3000°K4 4500°K6 6000°K


2 3 Chip

.

dimensions (mm) Depth 105Cutout Ø86Bezel Ø97Ingress IP20Fire rating 60min rating when installed in a 60min fire rated ceiling.



LED 3 ChipCCT 2700°K, 3000°K, 4500°K & 6000°K



Cutout

dimensions (mm)

Ø86

Ø97

105


ecOSeal

ECOSeal Mini

2.4

lamp

10–13/18W Compact Fluorescent

speCiFiCations

Ballast Pre–wired integral high frequency electronic ballast with pre–heat start and auto shutdown with defective lamp protection.Fire rating 60min rating when installed in a 60min fire rated ceiling.Bezel White pressed steel bezel supplied as standard, please see 3.12, for optional colours and accessories.Input supply 230–240VAC 50/60HzInput current 13W 0.073A, 18W 0.093A.Power factor 0.85Circuit loss < 10%Electrical safety Class IILamp type 13W TC–TE G24/GX24q–1 18W TC–TE G24/GX24q–2

photometriC data l (cd/klm) C0 C90

13W GX24Q–1 18W GX24Q–290° 90°

75° 75°

60° 60°

45° 45°

30° 30°

90° 90°

75° 75°

60° 60°

45° 45°

30° 30°

90

135

180

45

Cutout

Ø86

140

125

Ø110

120

180

240

60

part Codes To order, quote model code, e.g. 9117.10

model standard 1-10V dimmable emergenCy1-10V dimmable emergenCy

13w18w

1116.101117.10

1316.101317.10

9116.109117.10

9316.109317.10

dimensions (mm)


ecOSeal

ECOSeal Micro

2.5

lamp

10W Compact Fluorescent

speCiFiCations

Ballast Pre–wired integral high frequency electronic ballast with pre–heat start and auto shutdown with defective lamp protection.

Fire rating 60min rating when installed in a 60min fire rated ceiling.Bezel White pressed steel bezel supplied as standard, please see 3.12, for optional colours and accessories.Input supply 230–240VAC 50/60HzInput current 0.072APower factor 0.75Circuit loss < 10%Electrical safety Class IILamp type 10/11W PL–T2 G24/GX24q–1. Included as standard


10W PL–T290° 90°

75° 75°

60° 60°

45° 45°

30° 30°

Cutout

Ø86

105

125

Ø110

100

150

200

50

dimensions (mm)


model standard 1-10V dimmable emergenCy1-10V dimmable emergenCy

10/11w 1110.10 1310.10 9110.10 9310.10


ecOSeal

ECOSeal Nano

2.6

lamp

10W Compact Fluorescent

speCiFiCations

Ballast Pre–wired integral high frequency electronic ballast with pre–heat start and auto shutdown with defective lamp protection.Fire rating 60min rating when installed in a 60min fire rated ceiling.Input supply 230–240VAC 50/60HzInput current 0.072APower factor 0.75Circuit loss < 10%Electrical safety Class IILamp type 10/11W PL–T2 G24/GX24q–1. Included as standard


10W PL–T290° 90°

75° 75°

60° 60°

45° 45°

30° 30°

Cutout

Ø73

105

125

Ø86

55

110

165

220

wiTH fLOATiNg gLASS bezeL

wiTH fROSTed iP65 gLASS bezeL

wiTH iP65 gLASS bezeL

105

105

125

125

125

Ø86

Ø86

Ø86

dimensions (mm)


model Finish

1100 10/11W c/w integral ballast1127 10/11W c/w integral ballast & floating glass bezel1129 10/11W c/w integral ballast & IP65 glass bezel1129.XXfR 10/11W c/w integral ballast & frosted IP65 glass bezel1300 10/11W c/w remote 1–10v dimming ballast

10 White20 Black30 Brass40 Chrome50 Aluminium90 Satin Chrome

.


ecOSeal

2.7

ECOSeal Alume ELV

lamp

35W MR16

speCiFiCations

Transformer Pre–wired integral dimmable electronic transformer with short circuit, thermal and overload protection.Fire rating 60min rating when installed in a 60min fire rated ceiling.Ingress IP20Input supply 230–240VAC 50/60HzInput current 0.156A @ 240VPower factor 0.98Circuit loss < 5%Electrical safety Class II Lamp type 35W MR16 GU5.3 Aluminium reflector. Included as standard.



model Finish

1000 Fixed round downlight1001 Fixed square downlight1004 Tilt round downlight1005 Tilt square downlight

10 White50 Aluminium

.

Cutout

dimensions (mm)

Ø73

1000

87

105

1001

87

105

1004

96

105

1005

96

105

CutoutØ86


ecOSeal

ECOSeal ELV

2.8

lamp

35W MR16

speCiFiCations

Transformer Pre–wired integral dimmable electronic transformer with short circuit, thermal and overload protection.Fire rating 60min rating when installed in a 60min fire rated ceiling.Glass (IP65 only) Tempered frosted

(clear option available)Input supply 230–240VAC 50/60HzInput current 0.156A @ 240VPower factor 0.98Circuit loss < 5%Electrical safety Class II Lamp type 35W MR16 GU5.3 Aluminium reflector. Included as standard.



model Finish

1024 Downlight c/w integral transformer1025 Downlight excluding transformer1034 Downlight c/w integral transformer1035 Downlight excluding transformer1094 IP65 downlight c/w integral transformer1095 IP65 downlight excluding transformer

10 White20 Black30 Brass40 Chrome90 Satin Chrome

.

Cutout

dimensions (mm)

Ø73

1024

86

105

1094

86

105

1034

97

105

CutoutØ86


the ibl compact low energy downlighters encompass over 20 years of ibl development in electronic lighting equipment. Fitted with integral IBL HF electronic ballasts, these high performance compact fluorescent downlights are designed for use in any commercial application where quality, reliability and design flexibility are paramount.

The Synergy and mini synergy CFD’s can be dimmed using 1–10V, DSi or Dali dimming. Reflectors are available in specular, semi–specular and faceted metalised aluminium. a full range of glass trims and glare control louvres are available. they are designed for use in:

• Office areas • Shopping centres • Hotels • Hospitals • Corridors and bathrooms • Schools and universities

Features• Comprehensive range of energy efficient light sources • New Synergy LED fitting • Secure IBL tri–wing fixing • Integrated electronic control gear • 3–hour Emergency fittings • 1–10V, DSI and Dali dimming options • Wide range of finishes and bezels

Synergy

3.0

cHOice LOw PROfiLe

cHOice

Hid TiLTHidSQUARe

STANdARd

cHOice SURfAce MOUNT

cOMPAcT Led

cOMPAcT

MiNi SyNeRgyROUNd

AcceSSORieS

MiNiSyNeRgy SQUARe

cHOiceLed

cHOice XL


Logical Matrix

Synergy(1/2)

3.1.0


d

CF

l

mh

dim

ma

bl

e

em

er

ge

nC

y

ad

jus

tab

le

la

mp

s

la

mp

ty

pe

la

mp

po

we

r

re

sid

en

tia

l

& C

om

me

rC

ial

b

uil

din

g ‘l

’ C

om

pl

ian

Ce

inp

ut

su

pp

ly

ip4

4

ip6

5

ho

le

C

ut

ou

t (

mm

)

he

igh

t (

mm

)

Fin

ish

es

aC

Ce

ss

or

ies

a

Va

ila

bl

e

3.2 Synergy choicec3070.10 Recessed downlight, integrated HF ballast single lamp 1 CFL 13W 220–240VAC 185 125 10*

c3071.10 Recessed downlight, integrated HF ballast single lamp 1 CFL 18W 220–240VAC 185 125 10*

c3074.10 Recessed downlight, integrated HF ballast single lamp 1 CFL 26/32W 220–240VAC 185 125 10*

c3069.10 Recessed downlight, integrated HF ballast single lamp 1 CFL 42W 220–240VAC 185 125 10*

c3075.10 Recessed downlight, integrated HF ballast twin lamp 2 CFL 2 x 13W 220–240VAC 185 125 10*



3.3 Synergy choice Low Profilec3070.10 LP Recessed downlight, integrated HF ballast single lamp 1 CFL 13W 220–240VAC 185 100 10*

c3071.10 LP Recessed downlight, integrated HF ballast single lamp 1 CFL 18W 220–240VAC 185 100 10*

c3074.10 LP Recessed downlight, integrated HF ballast single lamp 1 CFL 26/32W 220–240VAC 185 100 10*

c3069.10 LP Recessed downlight, integrated HF ballast single lamp 1 CFL 42W 220–240VAC 185 100 10*

c3075.10 LP Recessed downlight, integrated HF ballast twin lamp 2 CFL 2 x 13W 220–240VAC 185 100 10*



3.4 Synergy choice XLc3098.10 Recessed downlight, integrated HF ballast twin lamp 2 CFL 2x26/32W 220–240VAC 248 185 10*


3.5 Synergy choice Ledc6510.XXX5 Choice LED downlight DLM1100 – remote driver 1 LED DLM 12W 220–240VAC 185 170 10*

c6511.XX25 Choice LED downlight TDLM1100 – integrated driver 1 LED TDLM 16W 220–240VAC 185 170 10*

c6520.XXX5 Choice LED downlight DLM2000 – remote driver 1 LED DLM 22W 220–240VAC 185 170 10*

3.6 Synergy Surface Mountc3080.10 Surface mount downlight, integrated HF ballast 1 CFL 13W 220–240VAC – 170 10*

c3081.10 Surface mount downlight, integrated HF ballast 1 CFL 18W 220–240VAC – 170 10*

c3084.10 Surface mount downlight, integrated HF ballast 1 CFL 26/32W 220–240VAC – 170 10*

3.7 Synergy Square3703.XX Square 1x26W 1 CFL 26W 220–240VAC 200x200 145 10, 70

3709.XX Square 1x42W 1 CFL 42W 220–240VAC 200x200 145 10, 70


10 White40 Chrome70 Silver



Logical Matrix

Synergy(2/2)

3.1.1


d

CF

l

mh

dim

ma

bl

e

em

er

ge

nC

y

ad

jus

tab

le

la

mp

s

la

mp

ty

pe

la

mp

po

we

r

re

sid

en

tia

l

& C

om

me

rC

ial

b

uil

din

g ‘l

’ C

om

pl

ian

Ce

inp

ut

su

pp

ly

ip4

4

ip6

5

ho

le

C

ut

ou

t (

mm

)

he

igh

t (

mm

)

Fin

ish

es

aC

Ce

ss

or

ies

a

Va

ila

bl

e

3.8.0 Synergy Hid3906.10 35W CDM–T narrow beam 1 CDM–T 35W 220–240VAC 185 190 10*

3906.10 w 35W CDM–T wide beam 1 CDM–T 35W 220–240VAC 185 190 10*

3907.10 70W CDM–T narrow beam 1 CDM–T 70W 220–240VAC 185 190 10*

3907.10 w 70W CDM–T wide beam 1 CDM–T 70W 220–240VAC 185 190 10*

3960.10 Linear 70W CDM–TD 1 CDM–TD 70W 220–240VAC 125 x 230 — 10, 70

3.8.1 Synergy Hid Adjustable3973.XX 35W adjustable CDM–T wide beam 1 CDM–T 35W 220–240VAC 163 130 10, 70

3975.XX 70W adjustable CDM–T wide beam 1 CDM–T 70W 220–240VAC 163 130 10, 70

3979.XX 35W adjustable CDM–TC wide beam 1 CDM–TC 35W 220–240VAC 153 120 10, 70

3980.XX 70W adjustable CDM–TC wide beam 1 CDM–TC 70W 220–240VAC 153 120 10, 70

3981.XX 35W adjustable CDM–T narrow beam 1 CDM–T 35W 220–240VAC 206 170 10, 70

3982.XX 70W adjustable CDM–T narrow beam 1 CDM–T 70W 220–240VAC 206 170 10, 70

3.9 Synergy Standard 3053.10 18W TC–D/TE 1 CFL 18W 230–240VAC 185 255 10*

3054.10 26W-42W TC–TE 1 CFL 26-42W 230–240VAC 185 255 10*

3.10.0 Synergy compact cfL3001.10 13W TC–D/TE 1 CFL 13W 230–240VAC 130 163 10*

3002.10 18W TC–TE 1 CFL 18W 230–240VAC 130 163 10*

3003.10 26W TC–TE 1 CFL 26W 220–240VAC 130 163 10*

3.10.1 Synergy compact Led340X.1XXd35 350mA/12W Compact LED (≈ 1200lm) 1 LED 12W 230–240VAC 130 100 10*

340X.1XXd55 550mA/20W Compact LED (≈ 1750lm) 1 LED 20W 230–240VAC 130 100 10*

340X.1XXd70 700mA/26W Compact LED (≈ 2100lm) 1 LED 26W 230–240VAC 130 100 10*

3.11.0 Mini Synergy Round3006.10 13W 1 CFL 13W 230–240VAC 85 140 10*

3007.10 18W 1 CFL 18W 230–240VAC 85 140 10*

3.11.1 Mini Synergy Square 3008.XX 13W 1 CFL 13W 230–240VAC 105 x 105 150 10, 70

3009.XX 18W 1 CFL 18W 230–240VAC 105 x 105 150 10, 70

3008.XXTwiN Twin 13W 2 CFL 2 x 13W 230–240VAC 105 x 205 150 10, 70

3009.XXTwiN Twin 18W 2 CFL 2 x 18W 230–240VAC 105 x 205 150 10, 70


10 White40 Chrome70 Silver



Synergy

Synergy Choice

3.2

lamp

Compact Fluorescent

speCiFiCations

Ballast Integral high frequency electronic ballast with pre–heat start and auto shut down with defective lamps.Reflector Spun specular aluminium supplied as standard, faceted option also available (suffix .19).Input supply 220–240VAC 50/60Hz (198–264VAC).Input current See table belowLamp type TC–TE Power factor 0.95Circuit loss <10%Electrical safety Class I

OPTiONSDimmable 1-10V, DALI & DSIEmergency For 3Hr emergency version

change the first two digits to C9 e.g. C9074.10

Bezel White ABS plastic supplied as standard, please refer to section 3.12 for optional colours and accessories


1X18W 1X26W 2X26W90° 90°

75° 75°

60° 60°

45° 45°

30° 30°

90° 90°

75° 75°

60° 60°

45° 45°

30° 30°

150

300

90°

75°

60°

45°

30°

75

90°

75°

60°

45°

30°

Cutout

Ø185

125

Ø205

75

150

225

300

225

240

180

120

60

dimensions (mm)

part Codes To order, quote model code, e.g. C3071.10

model lamp baseinput Current standard

1-10V dimmable emergenCy

1-10VdimmableemergenCy

1x13W1x18W1x26/32W1x42W2x13W2x18W2x26W

G24/GX24q–1G24/GX24q–2G24/GX24q–3G24/GX24q–4G24/GX24q–1G24/GX24q–2G24/GX24q–3

0.065A0.088A0.156A0.205A0.127A0.175A0.253A

c3070.10c3071.10c3074.10c3069.10c3075.10c3076.10c3078.10

c3170.10c3171.10c3174.10c3169.10c3175.10c3176.10c3178.10

c9070.10c9071.10c9074.10c9069.10c9075.10c9076.10c9078.10

c9170.10c9171.10c9174.10c9169.10c9175.10c9176.10c9178.10


Synergy

Synergy Choice Low Profile

3.3

lamp

Compact Fluorescent

speCiFiCations

Ballast Integral high frequency electronic ballast with pre–heat start and auto shut down with defective lamps.Reflector Spun specular aluminium supplied as standard, faceted option also available (suffix .19).Input supply 220–240VAC 50/60Hz (198–264VAC).Input current See table belowLamp type TC–TE Power factor 0.95Circuit loss <10%Electrical safety Class I


change the first two digits to C9 e.g. C9074.10 LP

Bezel White ABS plastic supplied as standard, please refer to section 3.12 for optional colours and accessories


1X18W 1X26W 2X26W90° 90°

75° 75°

60° 60°

45° 45°

30° 30°

90° 90°

75° 75°

60° 60°

45° 45°

30° 30°

90°

75°

60°

45°

30°

90°

75°

60°

45°

30°

Cutout

Ø185

100

Ø205

260 240

65

130

195

75

150

225

300

180

120

60

dimensions (mm)

part Codes To order, quote model code, e.g. C3071.10 LP

model lamp baseinput Current standard



1x13W1x18W1x26/32W1x42W2x13W2x18W2x26W

G24/GX24q–1G24/GX24q–2G24/GX24q–3G24/GX24q–4G24/GX24q–1G24/GX24q–2G24/GX24q–3

0.065A0.088A0.156A0.205A0.127A0.175A0.253A

c3070.10 LPc3071.10 LPc3074.10 LPc3069.10 LPc3075.10 LPc3076.10 LPc3078.10 LP





Synergy

Synergy Choice XL

3.4

lamp

Compact Fluorescent

speCiFiCations

Ballast Integral high frequency electronic ballast with pre–heat start and auto shut down with defective lamps.Reflector Spun aluminium.Input supply 220–240VAC 50/60Hz (198–264VAC).Lamp type TC–TE Power factor 0.95Circuit loss <10%Electrical safety Class I


change the first two digits to C9 e.g. C9098.10

Bezel White ABS plastic supplied as standard

Cutout

Ø248

185

Ø270

dimensions (mm)


model lamp base standard1-10V dimmable emergenCy

1-10V dimmableemergenCy

2x26/32W2x42W

G24/GX24q–3G24/GX24q–4

c3098.10c3099.10

c3198.10c3199.10

c9098.10c9099.10

c9198.10c9199.10

485

aCCessories

model Finish

3361 Die cast bezel3363 IP44 Clear glass bezel3364 IP44 Frosted glass bezel

10 White20 Black30 Brass40 Chrome50 Aluminium90 Satin chrome


Synergy

Synergy LED

3.5

lamp

LED Module

speCiFiCationsCutout

Ø185

180

Ø205

dimensions (mm)

part Codes To order, quote model code, then options, separated by a period (.); e.g. C6511.1325


c6510 1100lm remote driverc6511 1100lm integral dimmable driverc6520 2000lm remote driver

1 White 3 3000°K4 4000°K

1 Non-dimming2 Phase dimming

5 Fortimo

.

dimensions (mm) Depth 180Cutout Ø185Bezel Ø205Ingress IP20

dRiVeR Type Constant currentInput supply 220-240VAC 50/60HzPower factor >0.95CRI 80Ra

Led eNgiNe LED 1100lm & 2000lm versionsCCT 3000°K & 4000°KLifetime (L70) 25k hours @ T-case 65°C 50k hours @ T-case 55°C

c6510LED 1100lm – 12W Driver RemoteDimmable Optional

c6511LED 1100lm – 16W Driver IntegralDimmable As standard

c6520LED 2000lm – 22W Driver RemoteDimmable Optional

OPTiONSEmergency For 3Hr emergency version change the first two digits to C9 e.g. C9511.1325Bezel White ABS plastic supplied as standard, please refer to section 3.12 for optional colours and accessories

Synergy ChoiceSurface Mount

lamp

Compact Fluorescent

speCiFiCations

Ballast Integral high frequency electronic ballast with pre–heat start and auto shut down with defective lamps.Reflector Spun specular aluminium supplied as standard, faceted option also available.Input supply 220–240VAC 50/60Hz (198–264VAC).Lamp type TC–TE Power factor 0.95Circuit loss <10%Electrical safety Class IIngress IP20

OPTiONSIngress For IP44 & IP65 versions, suffix part code, e.g. C3080.10 IP65Dimmable 1-10V, DALI & DSIBezel White ABS plastic supplied as standard, please refer to section 3.12 for optional colours and accessories

100

Ø205


1X18W 1X26W 2X26W90° 90°

75° 75°

60° 60°

45° 45°

30° 30°

90° 90°

75° 75°

60° 60°

45° 45°

30° 30°

90°

75°

60°

45°

30°

90°

75°

60°

45°

30°260 240

65

130

195

75

150

225

300

180

120

60

dimensions (mm)


model lamp base standard1-10V dimmable

1x13W1x18W1x26/32W

G24/GX24q–1G24/GX24q–2G24/GX24q–3

c3080.10c3081.10c3084.10

c3180.10c3181.10 c3184.10

3.6

ibl Lighting80 81www.ibl.co.uk

Synergy

Synergy Square

3.7

lamp

Compact Fluorescent

speCiFiCations

Compact FluorescentBallast Remote high frequency

electronic ballast.Dimmable options 1–10V, DALI and DSIDiffuser Recessed opaque polymer

diffuserInput supply 220–240VAC 50/60HzInput current 28W – 0.12A

42W – 0.19ACircuit loss < 5%Electrical safety Class I

Cutout

200X200

225

145

dimensions (mm)


model lamp base standard1-10V dimmable emergenCy


xx denotesFinish

1x26W1x42W

G24/GX24q–3G24/GX24q–4

3703.XX3709.XX

3713.XX3719.XX

9703.XX9709.XX

9713.XX9719.XX

10 White70 Silver


Synergy

Synergy HID

3.8.0

lamp

Ceramic Discharge Metal Halide (CDM)

speCiFiCations

Ballast Remote pre–wired 35/70W super high frequency ballast with auto shut down with end of life or defective lamps.

Bezel Die–cast IP44 white bezel supplied as standard, please refer to section 3.12 for optional colours and accessories.

Input supply 220–240VAC 50/60Hz (198–264VAC).Input current 35W–0.18A / 70W–0.33ALamp type CDM–TPower factor 0.95Electrical safety Class I


35W CDM–T NARROW BEAM 35W CDM–T WIDE BEAM90° 90°

75° 75°

60° 60°

45° 45°

30° 30°

90° 90°

75° 75°

60° 60°

45° 45°

30° 30°

Cutout

Cutout

Ø205

140

190

260

LiNeAR

70W CDM–TD90°

75°

60°

45°

30°

90°

75°

60°

45°

30°

3100

1550

4650

6200 1480

1110

740

370 95

190

285

380

Ø185

230X230

3.8.1

Synergy HID Adjustablelamp

Ceramic Discharge Metal Halide (CDM)

speCiFiCations

Ballast Remote pre–wired 35/70W super high frequency ballast with auto shut down with end of life or defective lamps.

Input supply 220–240VAC 50/60Hz (198–264VAC).Input current 35W–0.18A / 70W–0.33ALamp type CDM–TPower factor 0.95Electrical safety Class I


35W CDM–T NARROW BEAM 35W CDM–T WIDE BEAM90° 90°

75° 75°

60° 60°

45° 45°

30° 30°

90° 90°

75° 75°

60° 60°

45° 45°

30° 30°

70W CDM–TD90°

75°

60°

45°

30°

3100

1550

4650

6200 1480

1110

740

370 95

190

285

380

Cutout

dimensions (mm)

Ø170

Ø167 Ø220

130

120 170

3979, 3980 3981, 3982

3973, 3975

Ø163

Ø153 Ø206

Cutout Cutout

dimensions (mm)

part Codes To order, substitute colour option for ‘xx’, e.g. 3906.10W

model

3906.10 35W CDM–T Narrow beam 3906.10 w 35W CDM–T Wide beam3907.10 70W CDM–T Narrow beam3907.10 w 70W CDM–T Wide beam3960.10 Linear 70W CDM–TD


model Finish

3973 35W CDM–T Wide beam3975 70W CDM–T Wide beam3979 35W CDM–TC Wide beam3980 70W CDM–TC Wide beam3981 35W CDM–T Narrow beam3982 70W CDM–T Narrow beam

10 White70 Silver


Synergy

3.9

Synergy Standard

Cutout

Ø205

255

Ø185

dimensions (mm)

lamp

Compact Fluorescent

speCiFiCations


model standard1-10V dimmable emergenCy


18W TC-D/TE26-42W TC-TE

3053.103054.10

3153.103154.10

9053.109054.10

9153.109154.10

Ballast Integral high frequency electronic ballast with pre–heat start and auto shut down with defective lamps.Reflector Spun specular aluminium.Input supply 220–240VAC 50/60Hz (198–264VAC).Lamp type TC–TE (TC–DE where stated)Power factor 0.95Circuit loss <10%Electrical safety Class I

OPTiONSDimmable 1-10V, DALI & DSIEmergency For 3Hr emergency version change the first two digits to C9 e.g. C9053.10Bezel White ABS plastic supplied

as standard, please refer to section 3.12 for optional colours and accessories.


Synergy

CompactCFL

3.10.0

lamp

Compact Fluorescent

speCiFiCations

Ballast Pre wired integral high frequency electronic ballast with pre–heat start and auto shut down with defective lamps.

Bezel White ABS bezel supplied as standard, please refer to section 3.12 for optional

colours and accessories.Reflector Spun specular aluminium supplied as standard.Input supply 13W & 18W 230–240VAC

50/60Hz, 26W 220–240VAC 50/60Hz (198–264V).

Input current See table belowLamp type TC–TE (TC–DE where stated)Power factor 13W & 18W 0.85 / 26W 0.95Circuit loss <10%Electrical safety 13W & 18W Class II / 26W Class I

Cutout

Ø144

163


1X13W TC–T 1X26W TC–T90° 90°

75° 75°

60° 60°

45° 45°

30° 30°

90° 90°

75° 75°

60° 60°

45° 45°

30° 30°

2X26W TC–T90°

75°

60°

45°

30°

90°

75°

60°

45°

30°180 180

120

160

45

90

135

45

90

135

40

80

Ø130

dimensions (mm)


model lamp base lamp base standard emergenCy

13W TC-D/TE18W TC-TE26W TC-TE

G24/GX24q-1G24/GX24q-2G24/GX24q-3

0.073A0.093A0.127A

3001.103002.103003.10

9001.109002.109003.10

Cutout

Ø144

Ø130

dimensions (mm)

100

part Codes To order, quote model code, then options, separated by a period (.); e.g. 3404.132D55

model Finish led CCt driVer Version power


1 White 2 2700°K3 3000°K4 4000°K5 5000°K


d Array 35 350mA55 550mA70 700mA

.

3.10.1

CompactLED lamp

LED

speCiFiCations

dimensions (mm) Depth 100Cutout Ø130Bezel Ø144Ingress IP20

dRiVeR Type Remote constant currentInput supply 220-240VAC 50/60HzPower factor >0.95CRI 80Ra

Led eNgiNe LED ArrayForward current 350mA 550mA 700mA Power 12W 20W 26W Lumen’s 1200lm 1750lm 2100lmCCT 2700°K, 3000°K, 4000°K & 5000°K Lifetime (L70) 50k hours

OPTicSArray Narrow 20°, Medium 35° & Wide 50° & Flood 70°

OPTiONSLED High CRI array engines

available across all colour temperatures (typical 95Ra) add 9 to the end of the suffix, i.e.3404.132D559

Emergency For 3Hr emergency version change the first digit to 9 e.g. 9403.132D55

Bezel White ABS plastic supplied as standard, please refer to section 3.12 for optional colours and accessories.


www.ibl.co.uk 91ibl Lighting90

Synergy

Mini Synergy Round

3.11.0

lamp

Compact Fluorescent

speCiFiCations

Ballast Integral high frequency electronic ballast with pre–heat start and auto shut down with defective lamps. Dimmable options 1–10V, DALI and DSIBezel White bezel supplied

as standard, please refer to section 3.12 for optional colours and accessories.

Reflector Spun specular aluminium supplied as standard. Input supply 230–240VAC 50/60HzInput current 13W – 0.073A, 18W – 0.093ALamp type TC–TE Power factor 0.85Circuit loss <10%Electrical safety Class II


3006 – 13W 3007 – 18W90° 90°

75° 75°

60° 60°

45° 45°

30° 30°

90° 90°

75° 75°

60° 60°

45° 45°

30° 30°

60

120

180

240

45

90

135

180

Cutout

Ø100

140

Ø85

dimensions (mm)


model standard1-10Vdimmable emergenCy


13W TC-TE 18W TC-TE

3006.103007.10

3206.103207.10

9006.109007.10

9206.109207.10


Synergy

Mini Synergy Square

3.11.1

lamp

Compact Fluorescent

speCiFiCations

Ballast Integral high frequency electronic ballast with pre–heat start and auto shut down with defective lamps. Dimmable options 1–10V, DALI and DSIReflector Spun specular aluminium supplied as standard.Input supply 230–240VAC 50/60HzInput current 13W – 0.073A (per head) 18W – 0.093A (per head)Lamp type TC–TE Power factor 0.85Circuit loss <10%Electrical safety Class II


3006 – 13W 3007 – 18W90° 90°

75° 75°

60° 60°

45° 45°

30° 30°

90° 90°

75° 75°

60° 60°

45° 45°

30° 30°

60

120

180

240

45

90

135

180

Cutout

133

133X232

150

150

105X105

TwiN HeAd

SiNgLe HeAd

Cutout

105X205

dimensions (mm)

part Codes To order, substitute finish option for ‘xx’, e.g. 3008.10

model standard1-10Vdimmable emergenCy

1-10VdimmableemergenCy Finish

13W TC-TE18W TC-TETwin 13W TC-TETwin 18W TC-TE

3008.XX3009.XX3008.XX TwiN3009.XX TwiN




10 White70 Silver


3025.40

3045

3266

3028.10

3026.90

3046

3267

3029.40

3027.40

3047

3268

3030.90

3028.00

Accessories

SynergySynergy

Mini/Micro

3.12

3028.00 Blue décor glass3028.10 White décor glass

3025 Steel bezel3026 Steel cowl3027 Floating glass3029 IP44 Steel bezel3030 IP65 Die–cast aluminium bezel

part Codes

model

model* Finish


compact

Synergy choice / Standard

3040.10 White polycarbonate bezel

3158.00 CAT2 Louvre3162.00 Wall wash kick reflector3160.10 White polycarbonate bezel

3041 Die cast bezel3042 IP44 Clear glass bezel3043 IP44 Frosted glass bezel3044 IP44 Polycarbonate visor bezel3045 Floating glass with small etched centre3046 Floating glass with large centre hole3047 Floating glass with large etched centre3020 IP65 Polycarbonate tamper proof

part Codes

model

part Codes

model

model* Finish

model* Finish



c3200 IP65 Polycarbonate tamper proofc3210 IP65 Glass tamper resistant 3161 Die cast bezel3163 IP44 Clear glass bezel3164 IP44 Frosted glass bezel3165 IP44 Polycarbonate visor bezel3266 Floating glass with small etched centre3267 Floating glass with large centre hole3268 Floating glass with large etched centre

*To order, quote model code, then finish, separated by a period (.); e.g. 3025.10




ComplianCe

the linear range features profiles that are sharp and elegant with clean lines that defines any interior space. They are discrete and can be used as a direct or indirect lighting solution. It uses compact dimmable and non dimmable LED drivers enabling easy control of the high output, high optic lED engines.

with strategically mounted lED engines, fittings can be surface mounted, recessed or suspended. the linear range is a customised lighting solution and are designed for use in:

• Boardrooms/meeting rooms • Reception areas • Feature walls • Galleries • Hotels/clubs • Residential spaces

Linear

4.0

AdjUSTAbLeLiNeAR Led

SLiM cOVeLed

SUSPeNded &SURfAce

ReceSSedQUAdRANT SURfAce

Led LigHTPANeLS

Led LigHTSTRiP

LiNeAR Led bAR


Logical Matrix

Linear

4.1

matrix Key Yes Optional


d

ad

jus

tab

le

Qu

ad

ra

nt

re

Ce

ss

ed

su

sp

en

de

d

su

rFa

Ce

mo

un

t

4.2 Slim cove Led635X.XXXX Slim Cove LED

4.3 Adjustable Linear Led6340.XXXXX Adjustable Linear LED

4.4 Linear Led bar6376.XXXXXXXX 17x10mm Fixed Linear LED

4.5.0 Quadrant Led Profiles661515X.XXXXXXXX 15x15mm (optional diffusers)

663030X.XXXXXXXX 30x30mm (optional diffusers)

665555X.XXXXXXXX 55x55mm (optional diffusers)

4.5.1 Recessed Led Profiles6718136.XXXXXXXX 18x13mm with flat diffuser

6726136.XXXXXXXX 26x13mm with flat diffuser





4.5.2 Suspended & Surface Led Profiles 681911X.XXXXXXXX 19x11mm (optional diffusers)

4.5.3 Suspended & Surface Led Profiles6836916.XXXXXXXX 36x91mm with flat diffuser









4.5.4 Surface Led Profiles 6966106.XXXXXXXX 66x10mm with flat diffuser






6907098.XXXXXXXX 7x9mm with decor diffuser

4.6 Led Light Panel 6931.7XXXX 295x295mm LED Panel

6932.7XXXX 300x300mm LED Panel









4.7 Led Light Strip (5m reel)64X2.XX IP20 LED Light strip

64X6.XX IP65 LED Light strip

64X8.XX IP68 LED Light stripcrown Spa, crown casino MelbourneLighting designer: dj coalition, Australia

ibl Lighting100 101www.ibl.co.uk

Linear

Slim Cove LED

4.2

lamp

LED Module

speCiFiCations

LED CCT 2700°K, 3000°K, 6000°K RGB (colour variable)

Length 1000mm and 2000mm Custom lengths available upon requestDriver 12V Constant voltage

6353 – 30 LedS/M LED power 7.2W/m +/- 5%LED quantity 30 LEDs/mLuminous flux 550 lm/mEfficacy 76 lm/W

6356 – 60 LedS/M LED power 14.4W/m +/- 5%LED quantity 60 LEDs/mLuminous flux 1100 lm/mEfficacy 76 lm/W

dimensions (mm)

28

17L


model Finish led CCt length (mm)

6353 30 LEDs/m6356 60 LEDs/m

1 White5 Silver

2 2700°K3 3000°K4 4000°K6 6000°KR RGB

10 100020 2000

.

Pier One Sebel Hotel, Sydneyinterior designer: bates Smart AustraliaLighting designer: electrolight Sydney

Please refer to section 4.7 for LED technical data12V Constant voltage drivers to be ordered separately


Linear

Adjustable Linear LED

4.3

lamp

LED Module

speCiFiCations

Adjustable 180°LED CCT 2700°K, 3000°K, 6000°KLength 60cm, 90cm, 120cm & 180cm Custom lengths available upon requestDriver Remote constant current 60cm 350mA 90cm 500mA 120cm 700mA 180cm 1ALED power 14.4W/m +/- 5%

dimensions (mm)


model Finish led CCt driVer length

6340 Adjustable LED 1 White 2 2700°K3 3000°K4 4000°K6 6000°K

X Not included1 Non-dimming2 Dimming

60 60cm90 90cm12 120cm18 180cm

.

11

L

26

Constant current drivers to be ordered separately


Linear

Linear LED Bar

4.4

lamp

LED Module

speCiFiCations

LED CCT 2700°K, 3000°K, 6000°KLength 50cm & 100cm Easily linked with pre-wired connections (5M max.)Driver Remote 12V constant voltageLED power 30LED’s/M: 7.2W/M 60LED’s/M: 14.4W/M IP Rating IP65

crown Spa, crown casino MelbourneLighting designer: dj coalition, Australia

part Codes To order, quote model code, then options, separated by a period (.); e.g. 6376.1B275110

model Finish led Cri / CCt led type length

6376 Linear LED Bar 1 White5 Aluminium

cRi <80A27 2700°KA30 3000°KA45 4500°KA60 6000°K

cRi >80b27 2700°Kb30 3000°K

cRi >90c27 2700°Kc30 3000°K

51 30LED’s/M52 60LED’s/M

05 50cm10 100cm

.12V Constant voltage drivers to be ordered separately

dimensions (mm)

17

L

10


Linear

4.5.0

LED ProfilesQuadrant


model (wxh) diFFuser Finish led Cri / CCt led type length

661515 15x15mm663030 30x30mm665555 55x55mm

X None2 Round4 Square

1 White5 Alum.

cRi <80A27 2700°KA30 3000°KA45 4500°KA60 6000°K

cRi >80b27 2700°Kb30 3000°K

cRi >90c27 2700°Kc30 3000°K

Please select option using the LED TYPE MATRIX abovee.g. 28

10 100cm15 150cm20 200cm

.

dimensions (mm)NO diffUSeR ROUNd diffUSeR SQUARe diffUSeR

led type matrix Use the matrix below to select the available LED type, e.g. 28

TyPe 3528 3528 3528 5050 5050TOTAL LED’S/m 120 180 240 60 144

ROwS 1 1 2 1 2STRiP widTH (MM) 8 10 15 8 19

model661515X 15x15mm 24 26 28 52 –663030X 30x30mm 24 26 28 52 55665555X 55x55mm 24 26 28 52 55

Please refer to section 4.7 for LED technical dataEach length complete with 2 end caps, constant voltage drivers to be ordered separately

crown casino Melbourne, western gaming RoomLighting designer: Point Of View, Australia


Linear

4.5.1

LED ProfilesRecessed

dimensions (mm)6718136 6710066

dimensions (mm)6788326 6763326 6749326

6726136


model (wxh) Finish led Cri / CCt led type length

6718136 18x13mm6726136 26x13mm6710066 10x6mm

6788326 88x32mm6763326 63x32mm6749326 49x32mm

1 White5 Aluminium

cRi <80A27 2700°KA30 3000°KA45 4500°KA60 6000°K

cRi >80b27 2700°Kb30 3000°K

cRi >90c27 2700°Kc30 3000°K

Please select option using the LED TYPE MATRIX above e.g. 28

10 100cm15 150cm20 200cm

.


TyPe 3528 3528 3528 3528 3528 5050 5050 5050 5050 5050TOTAL Led’S/M 120 120 180 180 240 60 120 144 200 280

ROwS 1 1 1 3 1 1 2 2 5 7STRiP widTH (MM) 5 8 10 24 10 8 28 19 36 56

model6718136 18x13mm – 24 26 – 28 52 – – – –6726136 26x13mm – 24 26 – 28 52 – – – –6710066 10x6mm 24 – – – – – – – – –

6788326 88x32mm – – – 26 – – 54 – 57 596763326 63x32mm – – – 26 – – 54 55 57 –6749326 49x32mm – – – 26 – – 54 55 – –Please refer to section 4.7 for LED technical data Each length complete with 2 end caps, constant voltage drivers to be ordered separately


Linear

4.5.2

LED ProfilesSuspended & Surface

dimensions (mm)6819111 6819112 6819113

dimensions (mm)6819114 6819117 6819118


model (wxh) diFFuser Finish led Cri / CCt led type length

681911 19x11mm 1 Round2 Round qtr.3 Square short4 Square long7 T Shaped8 Optical

1 White5 Alum.

cRi <80A27 2700°KA30 3000°KA45 4500°KA60 6000°K

cRi >80b27 2700°Kb30 3000°K

cRi >90c27 2700°Kc30 3000°K

TyPe 352824 120/M26 180/M28 240/M*

10 100cm15 150cm20 200cm

.*240 LEDs/M = 2 x 120LEDs/M rows


TyPe 3528 3528 3528TOTAL LED’S/m 120 180 240

ROwS 1 1 2STRiP widTH (MM) 8 10 15

model681911X 19x11mm 24 26 28Please refer to section 4.7 for LED technical data Each length complete with 2 end caps, constant voltage drivers to be ordered separatelySuspension kit part code 6328.70

TAb corp Offices, SydneyLighting designer: fiona Venn


Linear

4.5.3

LED ProfilesSuspended & Surface

dimensions (mm)MOdeL A MOdeL b MOdeL c

dimensions (mm)MOdeL d MOdeL e MOdeL f



MOdeL A6836916 36x91mm6836676 36x67mm6828556 28x55mm

MOdeL b6874326 74x32mm6849326 49x32mm6830306 30x30mm

MOdeL c6874776 74x77mm6849706 49x70mm6850506 50x50mm

1 White5 Aluminium

cRi <80A27 2700°KA30 3000°KA45 4500°KA60 6000°K

cRi >80b27 2700°Kb30 3000°K

cRi >90c27 2700°Kc30 3000°K


10 100cm15 150cm20 200cm

.


TyPe 3528 3528 3528 5050 5050 5050 5050TOTAL LED’S/m 180 180 240 120 144 200 280

ROwS 1 3 2 2 2 5 7STRiP widTH (MM) 10 24 15 28 19 36 56

model6836916 36x91mm – 26 – 54 55 – –6836676 36x67mm – 26 – 54 55 – –6828556 28x55mm – – – – 55 – –

6874326 74x32mm – 26 – 54 – – 596849326 49x32mm – 26 – 54 – 57 –6830306 30x30mm – 26 28 – 55 57 –

6874776 74x77mm – 26 – 54 – 57 596849706 49x70mm – 26 – 54 – 57 –6850506 50x50mm – 26 – 54 – 57 –



MOdeL d6857683 57x68mm6843513 43x51mm6829343 29x34mm

MOdeL e 681001 Ø100mm680501 Ø50mm680261 Ø26mm

MOdeL f680401 Ø40mm

1 White5 Aluminium

cRi <80A27 2700°KA30 3000°KA45 4500°KA60 6000°K

cRi >80b27 2700°Kb30 3000°K

cRi >90c27 2700°Kc30 3000°K


10 100cm15 150cm20 200cm

.


TyPe 3528 3528 3528 5050 5050 5050 5050TOTAL LED’S/m 180 180 240 120 144 200 280

ROwS 1 3 2 2 2 5 7STRiP widTH (MM) 10 24 15 28 19 36 56

model6857683 57x68mm – 26 – 54 – 57 –6843513 43x51mm – 26 – 54 – 57 –6829343 29x34mm – 26 28 – 55 – –

681001 Ø100mm 26 – 28 – 55 – –680501 Ø50mm 26 – 28 – 55 – –680261 Ø26mm 26 – 28 – 55 – –

680401 Ø40mm 26 – 28 – 55 – –

Please refer to section 4.7 for LED technical data Each length complete with 2 end caps, constant voltage drivers to be ordered separatelySuspension kit part code 6328.70Please refer to section 4.7 for LED technical data

Each length complete with 2 end caps, constant voltage drivers to be ordered separatelySuspension kit part code 6328.70


Linear

4.5.4

LED ProfilesSurface

dimensions (mm)MOdeL A MOdeL b 6907068



MOdeL A 6966106 66x10mm6951086 51x8mm6931086 31x8mm

MOdeL b 6916136 16x13mm6916066 16x6mm6907096 7x9mm6907098 7x9mm with decor diffuser

1 White5 Aluminium

cRi <80A27 2700°KA30 3000°KA45 4500°KA60 6000°K

cRi >80b27 2700°Kb30 3000°K

cRi >90c27 2700°Kc30 3000°K


10 100cm15 150cm20 200cm

.


TyPe 3528 3528 3528 3528 3528 5050 5050 5050 5050TOTAL LED’S/m 120 180 180 240 240 60 120 144 200

ROwS 1 1 3 1 2 1 2 2 5STRiP widTH (MM) 5 10 24 10 15 8 28 19 36

model6966106 66x10mm – – 26 – – – 54 – 576951086 51x8mm – – 26 – – – 54 55 576931086 31x8mm – 26 – – 28 – – – –

6916136 16x13mm – 26 – 28 – 52 – – –6916066 16x6mm – 26 – 28 – 52 – – –6907096 7x9mm 24 – – – – – – – –

6907098 7x9mm 24 – – – – – – – –Please refer to section 4.7 for LED technical data Each length complete with 2 end caps, constant voltage drivers to be ordered separately


Linear

4.6

LED Light Panel

speCiFiCations speCiFiCations


model Finish led CCt driVer power mounting

SMALL6931 295x295mm6932 300x300mm

LARge6901 595x595mm6902 600x600mm6903 620x620mm

7 Silver 3 2700-3000°K4 4000-4500°K6 6000-6500°K


SMALL 1 18W3 36W

LARge3 36W4 48W7 72W

1 Recessed2 Mounted3 Suspended

.


model Finish led CCt driVer power mounting

6933 300x600mm6920 1195x295mm6921 1200x300mm6923 1200x600mm6922 1195x595mm

7 Silver 3 2700-3000°K4 4000-4500°K6 6000-6500°K


3 36W4 48W7 72W

1 Recessed2 Mounted3 Suspended

.

dimensions (mm)

W

L

H

dimensions (mm)

W

L

H

Dimensions (mm) W x L x H 6931 – 295 x 295 x 9 6932 – 300 x 300 x 9 6901 – 595 x 595 x 9 6902 – 600 x 600 x 9 6903 – 620 x 620 x 9Mounting Recessed, mounted & suspended versionsFrame SilverDriver Remote, Constant voltageIngress IP20

Led PANeLLED CCT 2700-3000°K 4000-4500°K 6000-6500°KLED power 18W – 1500lm (+/- 5%) 36W – 3300lm (+/- 5%) 48W – 4500lm (+/- 5%) 72W – 6900lm (+/- 5%)

Dimensions (mm) W x L x H 6933 – 300 x 600 x 9 6920 – 1195 x 295 x 9 6921 – 1200 x 300 x 9 6923 – 1200 x 600 x 9 6922 – 1195 x 595 x 9Mounting Recessed, mounted & suspended versionsFrame SilverDriver Remote, Constant voltageIngress IP20

Led PANeLLED CCT 2700-3000°K 4000-4500°K 6000-6500°KLED power 36W – 3300lm (+/- 5%) 48W – 4500lm (+/- 5%) 72W – 6900lm (+/- 5%)


Linear

4.7

LED Light StripSpecificationS SpecificationS

High Output LED Light Strip

part codeS To order, quote model code, then options, separated by a period (.); e.g. 6412.44

ModeL rowS 12V 24V Led cct

IP206412.X2 60LEDs/m6412.X3 78LEDs/m6412.X5 96LEDs/m6412.X4 120LEDs/m6412.X6 180LEDs/m6432.X6 180LEDs/m6412.X7 240LEDs/m6422.X7 240LEDs/m6442.X9 360LEDs/m

IP656416.X2 60LEDs/m6416.X3 78LEDs/m6416.X5 96LEDs/m6416.X4 120LEDs/m


111113124

1111

1111

YYYYNYNNN

YYYY

YYYY

YNYYYYYYY

YNYY

YNYY

2 2700°K3 3000°K4 4500°K6 6500°KR RedY YellowG GreenB Blue

Length 5m ReelIP20Driver 12V or 24V DC Constant voltage – see table below (ordered separately)Ingress 64X2 – IP20 64X6 – IP65 64X8 – IP68

LEDType 3528LED CCT 2700°K, 3000°K, 4500°K & 6500°K Red, Yellow, Green & Blue

Length 5m ReelIP20Driver 12V or 24V DC Constant voltage – see table below (ordered separately)Ingress 64X2 – IP20 64X6 – IP65 64X8 – IP68

LEDType 5050LED CCT 2700°K, 3000°K, 4500°K & 6500°K Red, Yellow, Green, Blue & RBG colour changing

part codeS To order, quote model code, then options, separated by a period (.); e.g. 6416.44

ModeL rowS 12V 24V rGB Led cct


IP656466X1 30LEDs/m6466.X2 60LEDs/m

IP686468.X1 30LEDs/m6468.X2 60LEDs/m6468.X3 72LEDs/m

1112

11

111

YYNN

YY

YYN

NYYY

NY

NYY

YYYN

YY

YYY

2 2700°K3 3000°K 4 4500°K6 6500°KR RedY YellowG GreenB BlueRGB

Led Strip tYpe 3528 tecHnicaL data

TYPE 3528 3528 3528 3528 3528 3528 3528 3528 3528 3528ToTaL LED’s/m 60 78 96 120 120 180 180 240 240 360

Rows 1 1 1 1 1 1 3 1 2 4sTRIP wIDTh (mm) 8 8 8 5 8 10 24 10 15 28

Power per LED 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08Power per meter 4.8 6.24 7.68 9.6 9.6 14.4 14.4 19.2 19.2 28.8

Lumens / meter (CRI<80) 420 546 672 840 840 1222 1222 1596 1596 2394Lumens / LED (CRI<80) 7.0 7.0 7.0 7.0 7.0 6.8 6.8 6.7 6.7 6.7Lumens / watt (CRI<80) 88 88 88 88 88 85 85 83 83 83

Lumens / meter (CRI>80) 399 519 638 798 798 1161 1161 1516 1516 2274Lumens / LED (CRI>80) 6.7 6.7 6.7 6.7 6.7 6.5 6.5 6.3 6.3 6.3Lumens / watt (CRI>80) 83 83 83 83 83 81 81 79 79 79

Lumens / meter (CRI>90) 379 493 606 758 758 1103 1103 1440 1440 2161Lumens / LED (CRI>90) 6.3 6.3 6.3 6.3 6.3 6.1 6.1 6.0 6.0 6.0Lumens / watt (CRI>90) 79 79 79 79 79 77 77 75 75 75

Led Strip tYpe 5050 tecHnicaL data

TYPE 5050 5050 5050 5050 5050 5050 5050ToTaL LED’s/m 30 60 72 120 144 200 280

Rows 1 1 1 2 2 5 7sTRIP wIDTh (mm) 10 8 10 28 19 36 56

Power per LED 0.24 0.24 0.24 0.24 0.24 0.24 0.24Power per meter 7.2 14.4 17.28 28.8 34.6 48 67.2

Lumens / meter (CRI<80) 625 1250 1500 2450 2940 3958 5542Lumens / LED (CRI<80) 21 21 21 20 20 20 20Lumens / watt (CRI<80) 87 87 87 85 85 82 82

Lumens / meter (CRI>80) 594 1188 1425 2328 2793 3760 5265Lumens / LED (CRI>80) 19.8 19.8 19.8 19.4 19.4 18.8 18.8Lumens / watt (CRI>80) 82 82 82 81 81 78 78

Lumens / meter (CRI>90) 564 1128 1354 2211 2653 3572 5001Lumens / LED (CRI>90) 18.8 18.8 18.8 18.4 18.4 17.9 17.9Lumens / watt (CRI>90) 78 78 78 77 77 74 74

X Denotes LED CCT, please select from the LED CCT options table12V Supplied as standard, for 24V please add 24V to the part code e.g. 6412.32 24V

X Denotes LED CCT, please select from the LED CCT options table12V Supplied as standard, for 24V please add 24V to the part code e.g. 6462.32 24V

IBL Lighting120 www.ibl.co.uk 121

ComplianCe

25 years ago ibl developed their first range of HF electronic transformers. We have since sold over 60 million units worldwide. we now manufacture an extensive range of electronic control equipment for all lamp sources as well as lED drivers, engines and optics. applications include:

• Dimmable & non dimmable LED driver • SHF electronic metal halide ballast • Dimmable low voltage electronic transformers

Transform ation

5.0

cURReNT LiMiTiNg diMMAbLe Led dRiVeR

cONSTANT cURReNTLed dRiVeR

PwM diMMiNgMOdULeS

24V cONSTANTVOLTAge LeddRiVeR

12V cONSTANTVOLTAge LeddRiVeR

Led dRiVeRAcceSSORieS

Hf eLecTRONic TRANS–fORMeRS (eT)

SHf MeTAL HALide bALLAST

Hf eLecTRONic TRANS–fORMeRS (Pc)

Hf eLecTRONic TRANS–fORMeRS (eLT)

Hf eLecTRONic TRANS–fORMeRS (LOw PROfiLe)


Logical Matrix

Transformat ion(1/2)

5.1


d C

on

sta

nt

C

ur

re

nt

le

d C

on

sta

nt

Vo

lta

ge

ph

as

e

dim

ma

bl

e

1-10

Vd

imm

ab

le

da

li

dim

ma

bl

e

ma

x o

ut

pu

t

ou

tp

ut

V

olt

ag

e

ou

tp

ut

C

ur

re

nt

po

we

r F

aC

to

r(u

nd

imm

ed

)

nu

mb

er

oF

o

ut

pu

ts

pr

e w

ire

d

inp

ut

s

up

ply

ip r

at

ing

5.2.0 constant current Led driver4710.XX 7W 660mA LED driver 7W 16VDC Max 660mA 0.5 1 220–240VAC IP20

4712.XX 13W 700mA LED driver 13W 35VDC Max 700mA 0.9 1 220–240VAC IP20



5.2.1 current Limiting dimmable Led driver4720.XX 9W 700mA phase dimmable LED driver 9W 14.5VDC Max 700mA 0.9 1 230–240VAC IP20

4721.XX 16W 700mA phase dimmable LED driver 16W 25VDC Max 700mA 0.9 1 230–240VAC IP20




4726XX 14W 350mA phase dimmable LED driver 14W 42VDC Max 350mA 0.9 1 230–240VAC IP20

5.3.0 constant Voltage Led driver 12V/24V4700.XX120 12W IP20 Constant voltage LED driver 12W 12 & 24VDC 1.0A/0.5A Max 0.8 1 220–240VAC IP20

4701.XX120 18W IP20 Constant voltage LED driver 18W 12 & 24VDC 1.5A/0.75A Max 0.9 1 220–240VAC IP20




4706.XX120 75W IP20 Constant voltage LED driver 75W 12 & 24VDC 6.3A/3.1 Max 0.95 1 220–240VAC IP20

4703.XX167 36W IP67 Constant voltage LED driver 36W 12 & 24VDC 3.0A/ 1.5A Max 0.95 1 220–240VAC IP67






5.3.2 PwM dimming Led Modules4760.00 (96-288)W 1-10V (1 x 1-10V input with 1 channel PWM output) 1x(96-288)W 12-36VDC 1x8.0A Max 1 12-36VDC IP20

4761.00 (4.2-12.6)W 1-10V (1 x 1-10V input with 1 channel PWM output) 1x(4.2-12.6)W 12-36VDC 1x0.35A Max 1 12-36VDC IP20


4764.00 (96-288)W 1-10V (1 x 1-10V input with 4 channel PWM output) 4x(96-288)W 12-36VDC 4x8.0A Max 4 12-36VDC IP20



4767.00 (96-288)W 1-10V (4 x 1-10V input with 4 channel PWM output) 4x(96-288)W 12-36VDC 4x8.0A Max 4 12-36VDC IP20



4780.00 (96-288)W DALI (1 address, 4 synchronous outputs) 4x(96-288)W 12-36VDC 4x8.0A Max 4 12-36VDC IP20

4781.00 12.6W 350mA DALI (1 address, 4 synchronous outputs) 4x(4.2-12.6)W 12-36VDC 4x0.35A Max 4 12-36VDC IP20

4782.00 25.2W 700mA DALI (1 address, 4 synchronous outputs) 4x(8.4-25.2)W 12-36VDC 4x0.7A Max 4 12-36VDC IP20

4784.00 (96-288)W DALI (1 address, 4 sync outputs & push dimmable) 4x(96-288)W 12-36VDC 4x8.0A Max 4 12-36VDC IP20

4785.00 12.6W 350mA DALI (1 address, 4 sync outputs & push dimmable) 4x(4.2-12.6)W 12-36VDC 4x0.35A Max 4 12-36VDC IP20

4786.00 25.2W 700mADALI (1 address, 4 sync outputs & push dimmable) 4x(8.4-25.2)W 12-36VDC 4x0.7A Max 4 12-36VDC IP20

4787.00 (96-288)W DALI (4 address, 4 separate outputs) 4x(96-288)W 12-36VDC 4x8.0A Max 4 12-36VDC IP20

4788.00 12.6W 350mA DALI (4 address, 4 separate outputs) 4x(4.2-12.6)W 12-36VDC 4x0.35A Max 4 12-36VDC IP20

4789.00 25.2W 700mA DALI (4 address, 4 separate outputs) 4x(8.4-25.2)W 12-36VDC 4x0.7A Max 4 12-36VDC IP20



Logical Matrix

Transformat ion(2/2)

5.1


d d

riV

er

mh

ba

ll

as

t

el

eC

tr

on

iC

tr

an

sF

or

me

r

dim

ma

bl

e

ou

tp

ut

nu

mb

er

oF

o

ut

pu

ts

pr

e w

ire

d

inp

ut

su

pp

ly

el

eC

tr

iCa

l

sa

Fe

ty

s.e

.l.V

.

sh

or

t C

irC

uit

p

ro

te

Ct

ion

th

er

ma

l

pr

ot

eC

tio

n

Fau

lty

la

mp

C

ut

ou

t

5.5.0 Hf electronic Transformers (eT Range)4104.00 ET060/D 20–60W electronic transformer 20–60W 1 230–240VAC Class II

4106.00 ET105/D 35–105W electronic transformer 35–105W 1 230–240VAC Class II

4501.00 IP65 ET105/D 35–105W electronic transformer 35–105W 1 230–240VAC Class II

5.5.1 Hf electronic Transformers (Pc Range)4340.00 PC060/D 20–60W single terminated output 20–60W 1 230–240VAC Class II

4351.00 PC105/D3 35–105W 3 terminated output 35–105W 3 230–240VAC Class II


4361.00 PC150/DLS 50–150W single pre wired 50–150W 1 230–240VAC Class II


4232.00 PC200 Festoon 24V 200W 70–200W 1 230–240VAC Class II

5.5.2 Hf electronic Transformers (Low Profile)4616.00 Low profile 20–60W electronic transformer 20–60W 3 230–240VAC Class II

5.5.3 Hf electronic Transformers (eLT Range)4630.00 ELT060/D 20–60W electronic transformer 20–60W 1 230–240VAC Class II

4632.00 ELT060/DL Pre wired 20–60W electronic transformer 20–60W 1 230–240VAC Class II

4640.00 ELT105/D 35–105W electronic transformer 35–105W 1 230–240VAC Class II

4642.00 ELT105/DL Pre wired 35–105W electronic transformer 35–105W 1 230–240VAC Class II

5.6 SHf Metal Halide ballast4751.00 35W CDM SHF Ballast 35W 1 220–240VAC Class I

4752.00 70W CDM SHF Ballast 70W 1 220–240VAC Class I



Constant CurrentLED Driver

5.2.0

speCiFiCations speCiFiCations

Electrical safety Class IIOutput isolation S.E.L.V.LED Driver Constant currentInput supply 220–240VAC 50/60Hz

(198–264VAC).Power factor 4710 – 0.5 4712 – 0.9 4715 – 0.8 4716 – 0.8Protection Short circuit and

thermal protection.Connection Terminal blocks as

standard (00), also available pre wired (TC).

STANdARd

dimensions (mm)

PRe–wiRed wiTH TOP cONNecTOR

124

124

36

36

30

30

30

30

Electrical safety Class IIOutput isolation S.E.L.V.LED Driver Current limiting phase

dimmable optimised for leading edge phase control (Triac dimmers).

Input supply 230–240VAC 50/60HzPower factor 0.9 (undimmed)Protection Short circuit and

thermal protection.Connection Terminal blocks as

standard (00), also available pre wired (TC). PRe–wiRed wiTH TOP cONNecTOR

42

150

32 32

32 32

5.2.1

Transformation Transformation

Current Limiting Dimmable LED Driver

part Codes To order, quote model code, then options, separated by a period (.); e.g. 4710.TC

model suFFix

4710 7W 660mA4712 13W 700mA4715 12W 250mA4716 20W 350mA

00 Standard itemTc Pre-wired with TOP connector

.

part Codes To order, quote model code, then options, separated by a period (.); e.g. 4720.TC

model suFFix

4720 9W 700mA4721 16W 700mA4722 22W 700mA4723 22W 1000mA4725 10W 250mA4726 14W 350mA

00 Standard itemTc Pre-wired with TOP connector

.

STANdARd

dimensions (mm)

150

42


12V Constant Voltage LED Driver

5.3.0 5.3.1


24V Constant Voltage LED Driver

part Codes To order, quote model code; e.g. 4701.12120

model power ip rating input model dimensions (mm)

4700.12120 4701.12120 4702.12120 4703.12120 4704.12120 4706.12120

4703.12167 4705.12166 4706.12167 4707.12167 4708.12167 4709.12167

12W18W20W36W50W75W

36W60W75W100W150W200W

IP20IP20IP20IP20IP20IP20


220-240VAC220-240VAC220-240VAC100-240VAC100-240VAC100-240VAC


ABACCC

DEDDDD

98x36x22115x45x21113x44x28166x52x24184x61x32184x61x32

169x55x30.5240x30x28186x64x39191x70x40223x70x40249x70x40


model power ip rating input model dimensions (mm)

4700.24120 4701.24120 4702.24120 4703.24120 4704.24120 4706.24120

4703.24167 4705.24166 4706.24167 4707.24167 4708.24167 4709.24167

12W18W20W36W50W75W

36W60W75W100W150W200W





ABACCC

DEDDDD

98x36x22115x45x21113x44x28166x52x24184x61x32184x61x32

9x55x30.5240x30x28186x64x39191x70x40223x70x40249x70x40

speCiFiCations

LED Driver Constant voltageDimmable NoOutput voltage 12V

Input supply See table belowPower factor Model A : 0.8 Others > 0.9Protection Short circuit and

thermal protection.Connection Terminal blockAmbient Temp (ta) -20°C...50°C

speCiFiCations

LED Driver Constant voltageDimmable NoOutput voltage 24V

Input supply See table belowPower factor Model A : 0.8 Others > 0.9Protection Short circuit and

thermal protection.Connection Terminal blockAmbient Temp (ta) -20°C...50°C

W

L

H

W

H

L

L

L

L

W

H

W

H

W

H

dimensions (mm)MOdeL A

MOdeL b

MOdeL c

MOdeL d

MOdeL e

W

L

H

W

H

L

L

L

L

W

H

W

H

W

H


MOdeL b

MOdeL c

MOdeL d

MOdeL e


PWM Dimming Modules

5.3.2 5.4


LED Driver Accessoriesextension Cables

7100.1005 50cm7100.1010 1m7100.1020 2m7100.1030 3m7100.1050 5m7100.1070 7m7100.1100 10m

splitters

7002.00 2 way7003.00 3 way7006.00 6 way

7002.00

7003.00

7006.00

Allow for voltage drop when adding extension cables

Do not overload the LED driver when adding splitters

part Codes To order, quote model code; e.g. 4760.00. All drivers require separate 12-36VDC driver

model type output model dimensions (mm)

1-10V4760.00 1x(96-288)W 4761.00 1x12.6W 350mA 4762.00 1x25.2W 700mA

4764.00 4x(96-288)W 4765.00 4x12.6W 350mA 4766.00 4x25.2W 700mA

4767.00 4x(96-288)W 4768.00 4x12.6W 350mA 4769.00 4x25.2W 700mA

dALi4780.00 1x(96-288)W4781.00 1x12.6W 350mA4782.00 1x25.2W 700mA

4784.00 1x(96-288)W4785.00 1x12.6W 350mA4786.00 1x25.2W 700mA

4787.00 1x(96-288)W4788.00 1x12.6W 350mA4789.00 1x25.2W 700mA

CVCCCC

CVCCCC

CVCCCC

CVCCCC

CVCCCC

CVCCCC

1 channel 1-10V input with 1 channel PWM output1 channel 1-10V input with 1 channel PWM output1 channel 1-10V input with 1 channel PWM output



1 DALI address, 4 synchronous outputs1 DALI address, 4 synchronous outputs1 DALI address, 4 synchronous outputs

1 DALI address, 4 sync. outputs & push dimmable1 DALI address, 4 sync. outputs & push dimmable1 DALI address, 4 sync. outputs & push dimmable

4 DALI address, 4 separate outputs4 DALI address, 4 separate outputs4 DALI address, 4 separate outputs

AAA

BCC

BCC

BCC

BCC

BCC

82x33x2082x33x2082x33x20

168x58x28178x46x18178x46x18

168x58x28178x46x18178x46x18

1168x58x28178x46x18178x46x18

168x58x28178x46x18178x46x18

168x58x28178x46x18178x46x18

speCiFiCations

Input supply 12-36VDC – Separate power supply required IP Rating IP20Protection Short circuit and

thermal protection.Connection XXXX.00 – Terminal block XXXX.TC – Top ConnectorAmbient Temp (ta) -20°C...50°C

W

L

H

W

H

L

L

W

H


MOdeL b

MOdeL c

MOdeL A

MOdeL b & c



HF Electronic Transformers (PC)

5.5.1

HF Electronic Transformers (ET)

5.5.0

speCiFiCations

Dimming Fully dimmable with trailing or leading edge dimmers.

Electrical safety Class IIOutput isolation S.E.L.V.Input supply 230–240VAC 50/60HzOutput voltage 11.7VPower factor 0.98Circuit loss < 5%Protection Short circuit, thermal

and overload protection.Connection Pre wired input and output

4104.00, 4106.00

4340, 4351

4501.00

4360, 4361, 4370, 4232

Ø34 Ø34

148

speCiFiCations


Electrical safety Class II (4232.00 – Class I)Output isolation S.E.L.V.Input supply 230–240VAC 50/60HzOutput voltage 11.7V (4232.00 – 23.5V)Power factor 0.98Circuit loss < 5%Protection Short circuit, thermal

and overload protection.Connection Single and multi output

versions available.

4340, 4351

4360, 4361, 4370, 4232

42

54

150

200

32

43

32

43


model output terminations

4104.00 ET060/D 20–60W electronic transformer4106.00 ET105/D 35–105W electronic transformer4501.00 IP65 ET105/D 35–105W electronic transformer

20–60W35–105W35–105W

111



4340.00 PC060/D 20–60W single terminated output4351.00 PC105/D3 35–105W 3 terminated output4360.00 PC150/D3 50–150W 3 terminated output4361.00 PC150/DLS 50–150W single pre wired4370.00 PC200/D4 70–210W 4 terminated output4232.00 PC200 Festoon 24V 200W

20–60W35–105W50–150W50–150W70–210W200W

133141

dimensions (mm) dimensions (mm)



HF Electronic Transformers (ELT)

5.5.3

HF Electronic Transformers (Low Profile)

5.5.2

speCiFiCations



and overload protection.Connection Pre wired input.

speCiFiCations



and overload protection.Connection 4630/4640 – Terminal block,

4632/4642 – Pre wired.

4630, 4640

4630, 4640

dimensions (mm)dimensions (mm)

4632, 4642

4632, 4642

3644

15 15

36

30 30

124

164

124

30 30



4616.00 20–60W electronic transformer 20–60W 1



4630.00 20–60W electronic transformer4632.00 Pre wired 20–60W electronic transformer4640.00 35–105W electronic transformer4642.00 Pre wired 35–105W electronic transformer

20–60W20–60W35–105W35–105W

1111


Transformation

SHF Metal Halide Ballast

5.6

speCiFiCations

Electrical safety Class IInput supply 220–240VAC 50/60Hz

(198–264VAC).Input current 4751.00 – 0.18A,

4752.00 – 0.33A.Output 4751.00 – 35W, 4752.00 – 70W. Power factor 0.95Ignition voltage 3–5kVProtection Auto shut down

with faulty lamp.

dimensions (mm)

200

54

43 43


model

4751.00 35W CDM SHF Ballast4752.00 70W CDM SHF Ballast


ComplianCe

Technical Data

6.0


Led data

6.1.0

Full LDT/IES files are available for download at our website www.ibl.co.uk

Spot (10°)

Narrow (20°)

Medium (35°)

wide (50°)

2700°K 545lm 537lm 530lm 491lm

3000°K 537lm 528lm 521lm 482lm

4500°K 660lm 650lm 637lm 592lm

6000°K 681lm 668lm 659lm 615lm

ILLUMINANCE(LUX) BEAM DIA. (M)

0.7M

1.3M

2.0M

2.7M

3.3M

1,093

273

121

68

43


0.3M

0.7M

1.0M

1.4M

1.7M

3,216

804

357

201

128


1.0M

2.0M

3.0M

4.0M

5.0M

558

139

62

34

22

1M

2M

3M

4M

5M

75°

60°

45°

30°

75°

60°

45°

30°

Spot 10° Narrow 20° Medium 35° wide 50°


0.7M

1.3M

2.0M

2.7M

3.3M

1,291

322

143

80

51


0.3M

0.7M

1.0M

1.4M

1.7M

3,797

949

421

237

151


0.9M

1.7M

2.6M

3.5M

4.4M

705

176

75

44

28

1M

2M

3M

4M

5M

1m

2m

3m

4m

5m


0.3M

0.6M

0.9M

1.2M

1.4M

5,522

1,380

613

345

220

45

00

°K


0.7M

1.4M

2.1M

2.7M

3.4M

1,053

263

117

65

42


0.3M

0.7M

1.0M

1.4M

1.7M

3,178

794

353

198

127


0.8M

2.1M

3.1M

4.1M

5.1M

554

138

61

34

22

1M

2M

3M

4M

5M

1m

2m

3m

4m

5m


0.3M

0.6M

0.8M

1.1M

1.4M

4,779

1,194

531

297

191

30

00

°K


0.3M

0.6M

0.8M

1.1M

1.4M

4,944

1,236

549

309

197

1m

2m

3m

4m

5m

270

0°K


0.7M

1.3M

2.0M

2.7M

3.3M

1,387

346

154

85

55


0.3M

0.7M

1.0M

1.3M

1.6M

4,233

1,058

470

264

169


0.9M

1.9M

2.8M

3.7M

4.7M

778

194

88

48

31

1M

2M

3M

4M

5M

1m

2m

3m

4m

5m


0.3M

0.5M

0.8M

1.0M

1.3M

6,960

1,740

773

435

278

60

00

°K

LED type 3 Chip Cree© XPG2 LEDsPower 6W giving a minimum of 80lm/W Heat sink Custom highly efficient aluminium heat sink to control heat dissipation allowing high output with longer lifePower source 700mA Constant currentConnection Plug & socket TOP connectionOptics Interchangeable optics and retaining ringsLifetime (L70) 50,000hrs.



Led data

6.1.1

Narrow (20°)

Medium(30°)

wide(40°)

2700°K 754lm 693lm 691lm3000°K 751lm 695lm 690lm4500°K 865lm 798lm 781lm6000°K 926lm 871lm 853lm


0.6M

1.1M

1.7M

2.2M

2.8M

1,740

435

193

108

69

1M

2M

3M

4M

5M


0.5M

1.0M

1.6M

2.1M

2.6M

1,850

462

205

115

74

1M

2M

3M

4M

5M


0.6M

1.2M

1.8M

2.5M

3.1M

1,696

424

188

106

67

1M

2M

3M

4M

5M


0.6M

1.3M

1.9M

2.6M

3.2M

1,838

459

204

114

73

1M

2M

3M

4M

5M


0.4M

0.8M

1.1M

1.5M

1.9M

3,214

803

357

200

128


0.4M

0.7M

1.1M

1.5M

1.8M

4,232

1,058

470

264

169


0.4M

0.8M

1.1M

1.5M

1.9M

3,865

966

429

241

154


0.4M

0.8M

1.1M

1.5M

1.9M

3,332

833

370

209

133

75°

60°

45°

30°

75°

60°

45°

30°

Narrow 20° Medium 30° wide 40°

1m

2m

3m

4m

5m


0.3M

0.6M

0.9M

1.2M

1.5M

6,798

1,428

634

357

228

45

00

°K

1m

2m

3m

4m

5m


0.3M

0.6M

0.9M

1.2M

1.5M

5,711

1,428

634

357

228

30

00

°K

1m

2m

3m

4m

5m


0.3M

0.6M

0.9M

1.2M

1.5M

5,959

1, 489

662

372

128

270

0°K

1m

2m

3m

4m

5m


0.3M

0.6M

0.9M

1.1M

1.4M

7,431

1,857

825

464

297

60

00

°K





Led data

6.1.2

Narrow (20°)

Medium(30°)

wide(40°)

2700°K 1,298lm 1,165lm 1,153lm

3000°K 1,293lm 1,163lm 1,144lm

4500°K 1,499lm 1,343lm 1,335lm

6000°K 1,649lm 1,480lm 1,460lm


0.7M

1.5M

2.2M

2.9M

3.7M

2,105

526

233

131

84

1M

2M

3M

4M

5M


0.7M

1.5M

2.2M

2.9M

3.7M

2,039

509

226

127

81

1M

2M

3M

4M

5M


0.7M

1.5M

2.2M

2.9M

3.7M

2,246

561

249

140

90

1M

2M

3M

4M

5M


0.7M

1.5M

2.2M

2.9M

3.7M

2,586

646

287

161

104

1M

2M

3M

4M

5M


0.5M

1.0M

1.5M

1.9M

2.4M

3,818

954

424

238

152


0.5M

1.0M

1.5M

1.9M

2.4M

4,988

1,247

554

311

200


0.5M

1.0M

1.5M

1.9M

2.4M

4,516

1,129

501

282

180


0.5M

1.0M

1.5M

1.9M

2.4M

3,849

962

427

240

154

75°

60°

45°

30°

75°

60°

45°

30°


1m

2m

3m

4m

5m


0.3M

0.6M

0.9M

1.1M

1.4M

12,409

3,102

1,378

775

496

45

00

°K

1m

2m

3m

4m

5m


0.3M

0.6M

0.9M

1.1M

1.4M

10,669

2,667

1,185

666

426

30

00

°K

1m

2m

3m

4m

5m


0.3M

0.6M

0.9M

1.1M

1.4M

10,692

2,673

1,188

668

427

270

0°K

1m

2m

3m

4m

5m


0.3M

0.6M

0.9M

1.1M

1.4M

13,809

3,452

1,534

863

552

60

00

°K


wu Han Shan Phoenix Hilton Hotel, chinaLighting designer: Roger Lim, Relux & Relux, Shanghai



Led data

6.2.0

Narrow (20°)

Medium(30°)

wide(40°)

2700°K 642lm 634lm 629lm3000°K 685lm 684lm 682lm4000°K 693lm 688lm 683lm5000°K 734lm 730lm 728lm


0.6M

1.3M

1.9M

2.6M

3.2M

1,057

264

117

66

42

1M

2M

3M

4M

5M


0.6M

1.3M

1.9M

2.6M

3.2M

1,146

286

127

71

45

1M

2M

3M

4M

5M


0.6M

1.3M

1.9M

2.6M

3.2M

1,147

287

127

71

46

1M

2M

3M

4M

5M


0.6M

1.3M

1.9M

2.6M

3.2M

1,223

305

135

76

49

1M

2M

3M

4M

5M


0.4M

0.8M

1.2M

1.6M

2.1M

1,681

420

186

105

67


0.4M

0.8M

1.2M

1.6M

2.1M

1,936

484

215

121

77


0.4M

0.8M

1.2M

1.6M

2.1M

1,825

456

202

114

73


0.4M

0.8M

1.2M

1.6M

2.1M

1,814

453

201

113

72

75°

60°

45°

30°

75°

60°

45°

30°


1m

2m

3m

4m

5m


0.3M

0.6M

0.9M

1.3M

1.6M

2,395

598

266

149

95

40

00

°K

1m

2m

3m

4m

5m


0.3M

0.6M

0.9M

1.3M

1.6M

2,367

591

263

148

94

30

00

°K

1m

2m

3m

4m

5m


0.3M

0.6M

0.9M

1.3

1.6

2,219

554

246

138

88

270

0°K

1m

2m

3m

4m

5m


0.3M

0.6M

0.9M

1.3M

1.6M

2,537

634

287

156

101

50

00

°K

LED type ‘B’ 9.5W Cree© Array LEDPower 9.5W giving a minimum of 66lm/W Heat sink Custom highly efficient aluminium heat sink to control heat dissipation allowing high output with longer lifePower source 250mA Constant currentConnection Plug & socket TOP connectionOptics Interchangeable optics and retaining ringsLifetime (L70) 50,000hrs.

Narrow (20°)

Medium(30°)

wide(40°)

2700°K 1,002lm 1,000lm 999lm3000°K 1,074lm 1,072lm 1,070lm4000°K 1,101lm 1,098lm 1,097lm5000°K 1,181lm 1,177lm 1,172lm

1m

2m

3m

4m

5m


0.3M

0.6M

0.9M

1.3M

1.6M

3,463

865

384

216

138

1m

2m

3m

4m

5m


0.3M

0.6M

0.9M

1.3M

1.6M

4,082

1,020

453

255

163

1m

2m

3m

4m

5m


0.3M

0.6M

0.9M

1.3M

1.6M

3,805

951

422

237

152

1m

2m

3m

4m

5m


0.3M

0.6M

0.9M

1.3M

1.6M

3,712

928

412

232

148


0.4M

0.8M

1.2M

1.6M

2.1M

2,652

663

294

165

106


0.4M

0.8M

1.2M

1.6M

2.1M

3,122

780

346

195

124


0.4M

0.8M

1.2M

1.6M

2.1M

2,912

728

323

182

116


0.4M

0.8M

1.2M

1.6M

2.1M

2,843

710

316

177

113



0.6M

1.3M

1.9M

2.6M

3.2M

1,843

460

204

115

73

1M

2M

3M

4M

5M

40

00

°K


0.6M

1.3M

1.9M

2.6M

3.2M

1,798

449

199

112

71

1M

2M

3M

4M

5M

30

00

°K


0.6M

1.3M

1.9M

2.6M

3.2M

1,678

419

186

104

67

1M

2M

3M

4M

5M

2700

°K


0.6M

1.3M

1.9M

2.6M

3.2M

1,969

492

218

123

78

1M

2M

3M

4M

5M

50

00

°K

LED type ‘C’ 13W Cree© Array LEDPower 13W giving a minimum of 76lm/WHeat sink Custom highly efficient aluminium heat sink to control heat dissipation allowing high output with longer lifePower source 350mA Constant currentConnection Plug & socket TOP connectionOptics Interchangeable optics and retaining ringsLifetime (L70) 50,000hrs.

6.2.1

75°

60°

45°

30°

75°

60°

45°

30°



Led XPg2 engine Part codes

6.3.0

3 Chip 6w & 4 Chip 8w Cree© xpg2 leds

6.3.1

part Codes


852 Standard853 Integrated

3 cHiP STANdARd1 10°2 20°3 35°5 50°

3 cHiP iNTegRATed2 20°3 30°4 40°

4 cHiP bOTH TyPeS 2 20°3 30°4 40°

STANdARdX Not Required1 White2 Black3 Brass4 Chrome5 Alume7 Silver9 Satin Chrome

iNTegRATed 1 White2 Black5 Alume7 Silver

cRi 802 2700°K3 3000°K

cRi 754 4500°K6 6000°K


X Not Required

2 3 Chip4 4 Chip

.

Led cXA engine Part codes

7 Chip 14w Cree© xpg2 leds

part Codes


8532 20°8533 30°8534 40°

1 White2 Black5 Alume7 Silver

cRi 802 2700°K3 3000°K

cRi 754 4500°K6 6000°K


X Not Required

7 7 Chip

.

50 5056 60

‘b’ 9.5w Cree© array led

part Codes


8532 20°8533 30°8534 40°8536 60°


cRi 802 2700°K3 3000°K

cRi 754 4000°K5 5000°K


X Not Required

b B Array

.

‘C’ 13w Cree© array led

part Codes


8532 20°8533 30°8534 40°8536 60°


cRi 802 2700°K3 3000°K

cRi 754 4000°K5 5000°K


X Not Required

c C Array

.

part Codes – high Cri


8532 20°8533 30°8534 40°8536 60°


cRi 952 2700°K3 3000°K4 4000°K5 5000°K


X Not Required

b9 High CRI B Array

.

part Codes – high Cri


8532 20°8533 30°8534 40°8536 60°


cRi 952 2700°K3 3000°K4 4000°K5 5000°K


X Not Required

c9 High CRI C Array

.

50 50 50 50

75

50

68

50

83

50

3 cHiPStandard StandardIntegrated Integrated

4 cHiP

dimensions (mm)

dimensions (mm)

dimensions (mm)

dimensions (mm)

dimensions (mm)


Terms and Conditions of Sale

In these terms and conditions references to ‘the Company’ are in each case to IBL Lighting Ltd whose registered office is situated at 1 Home Barn Court, Effingham, Surrey, UK and or China Trading & Logistics Ltd, whose registered Office is situated in Unit A Floor 10, New East Sun Building, Shing Yip street, Kwun Tong, Kowloon, Hong Kong.

ScoPE No variation of these conditions shall be effective unless made in writing and signed by an authorised officer of the Company. The Company will verify whether any named individual has the requisite authority on request.

QuotationS All Quotations made and all Orders accepted by salesmen and agents of the Company are subject to confirmation by the Company’s Head Office. No contract shall come into existence until the Customer’s order has been accepted by the issue of the Company’s acknowledgement.

THE GUARANTEE Any product supplied by the Company which fails due to faulty materials or workmanship, (specifically excluding batteries, lampholders and light sources), within ten years from date of invoice will be replaced by the Company free of charge, or credited, at the discretion of the Company, provided that it is returned freight pre-paid to the Company, that failure is not attributable to physical damage, modification, interference or installation other than in accordance with the Company’s installation instructions, and that the product has not been operated or stored in conditions other than normal working conditions. No third party repair or replacement costs are in anyway covered by this guarantee. This guarantee replaces and expressly excludes any other implied warranty.

DESCRIPTION Illustrations, dimensions and any other information given by the Company in its catalogues and other literature are approximate and for guidance only. They are subject to change without notice.

PRICES AND TERMS OF PAYMENT 1 All prices quoted by the Company are exclusive of Value Added Tax. The price includes the Company’s usual packaging only.

2 The Company reserves the right to vary prices at any time to take into account any increase in the Company’s costs.

3 Two trade references and a Bankers reference must be submitted to the Company before a normal trading account can be opened. In the absence of any concession to the contrary by the Company from time to time (whether as to credit and/or discount) accounts are due and payable in full 30 days after the date of the invoice (the due date) in respect thereof and time for payment shall be of the essence.

4 If the Customer fails to pay the Company any amount due on the due date:

RETURNED GOODS Goods correctly supplied against an order must not be returned to the Company without prior written permission and, if permitted, must be returned in perfect condition including the original packaging. If goods are being returned the Customer shall bear the cost of carriage and risk of accidental loss or damage. The Company reserves the right to make a charge for handling returned goods not exceeding 25% of the invoice price of those goods.

FORCE MAJEURE 1 Deliveries may be wholly or partially suspended

in the event of a stoppage, delay or interruption of work in the establishment of either the Company or the Customer during the delivery period as a result of strikes, lockouts, trade disputes, breakdown, accident or any cause whatsoever beyond the control of the Company.

2 In the event of an occurrence as is mentioned above the Company shall have the option in its absolute discretion of cancelling all or any deliveries under the contract and there shall be no liability whatsoever on the Company as a result of such a cancellation.

RETENTION OF TITLE It is a Condition of the contract that until payment for the goods has been received in full, ownership of the goods delivered by the Company to the Customer shall remain vested in the Company , the Company shall be entitled to obtain possession of the goods, the Customer shall hold the goods as bailie in fiduciary capacity for the Company and keep the goods in good repair and condition and shall hold them separately from any other assets.

RISK 1 The insurable risk in the goods shall pass to the

Customer as soon as the goods are delivered to him or to his order and pending disposal the Customer shall keep the goods insured in the amount of the price at which goods are sold to the Customer against all insurable risk.

2 Any item received by the Company from a Customer is held at the Customer’s risk and the Customer shall keep any such items insured to their full value.

uSE 1 The Customer warrants that it shall not modify

the goods in an way without the prior consent of the Company.

2 The Customer warrants that it will use the goods in a proper and safe manner and in accordance with any instructions given by the Company.

3 The Customer warrants that if possession of the goods shall pass to any other person the Customer will supply that other person with full and proper instructions for the safe and proper use of the goods and bring those instructions to the attention of that other person and the Customer shall indemnify the Company against any claim made by any person against the Company in respect of the goods after they have been delivered.

LIABILITY 1 The Company shall have no liability whatsoever

(howsoever arising) in relation to any loss suffered by the Customer or any third party arising from the supply of the goods (howsoever caused) except in the event of the Company being shown negligent in the supply of goods when its liability for death or personal injury of any person caused by such negligence shall be unlimited.

2 The employees or Agents of the Company may offer and provide advice in connection with the suitability of the Company’s products or the connection of same to any other appliance whether before or after the making of this agreement. Any help and advice given orally prior to the customer entering into a contract and which materially affects the Customer’s decision to place an order shall not amount to a representation unless details of such help and advice are confirmed in writing by a duly authorised officer or employee of the Company. No such help and advice is to be taken as an acceptance by them of any liability over and above the liability accepted by the Company under the terms of it’s guarantee and notwithstanding that any help or advice may have been negligent.

3 The Company shall not be liable to the Customer for shortage in quantity delivered or (where the goods are carried by the Company’s own transport or by a carrier on behalf of the Company) damage to or loss of the goods or any part thereof in transit unless such shortage, damage or loss is noted on the Company’s copy of the delivery note and full details of such shortage, damage or loss are provided to the Company in writing within three working days of delivery. Any claim for non-delivery must be made within fourteen days of the date of the invoice, in writing.

4 Any liability which may arise in contract or in tort (including liability in negligence) arising out of or as a result of the above shall be limited to the price invoiced by the Company of the goods in question. However, your statutory rights are not affected.

FOREIGN ELEMENT 1. These conditions shall be governed by and construed in all respects in accordance with English Law.

2. All orders accepted by the Company and any dispute or litigation arising therefrom shall be governed by English Law and be subject exclusively to the jurisdiction of the English Courts.

E & O E

a) the Company shall have the right to cancel any contract made with the Customer and/or suspend or continue performance of the contract including delivery of goods at the Company’s option without prejudice to the Company’s right to recover damages for any loss sustained by it.

B) The whole of the balance of any monies owing by the Customer on this any other contract then outstanding shall become due and payable forthwith.

c) The outstanding sum shall carry interest at the rate of 2 per cent per month from the due date before and after judgement

d) The Company may repossess any goods in respect of which payment is overdue and thereafter resell the same, and for this purpose the Customer hereby grants an irrevocable right and licence to the Company and its servants to enter upon all or any of its premises with or without vehicles during normal business hours; this right shall continue to subsist notwithstanding the termination of the contract for any reason and is without prejudice to any other rights of the Company.

e) The Company may without prejudice to any of its other rights stop goods in transit.

f) The Company shall have a general lien on all goods and property belonging to the Customer held by the Company and such lien shall be exercisable in respect of all sums lawfully due from the Customer to the Company ; the Company shall be entitled on the expiration of fourteen days to dispose of such goods or property in such a manner and at such a price as it thinks fit and to apply the proceeds towards such debt.

DELIVERY 1 Delivery shall be at the delivery address

specified in the quotation or order acknowledgement or in the absence of any such address at the Customer’s premises.

2 Delivery dates mentioned in any quotation, order acknowledgement or elsewhere are approximate only and not of any contractual effect. Time is not to be of the essence for delivery. The Company shall not have any liability for loss or Damage (including loss of profit and consequential loss) to the Customer in respect of any failure to deliver on any particular date or dates.

3 Delivery by carrier or by the Company’s own transport is made at the Company’s own cost. Special delivery arrangements at the request of the Customer will entail additional charges for carriage.

CANCELLATION AND TERMINATION Orders accepted by the Company may be cancelled only with the written consent of the Company, such consent to be in the Company’s absolute discretion and then only upon payment of reasonable cancellation charges which shall include expenses already incurred and take account of commitments already entered into by the Company. Amendments to Orders accepted by the Company may also be subject to a similar penalty at the absolute discretion of the Company.

7.1


Explanation of Icons iNTeRNAL cUT–OUT OVeRLOAd PROTecTiON

AcOUSTic RATed

fiRe RATed

SUiTAbLe fOR MOUNTiNg ON NORMALLy fLAMMAbLe MATeRiAL

iNdePeNdeNT cONVeRTeR

iP20 – iNTeRiOR USe

iP44 – SPLASH PROOf (MAy ReQUiRe OPTiONAL AcceSSORy)

iP65 – dUST TigHT ANd jeT PROOf (MAy ReQUiRe OPTiONAL AcceSSORy)

SUiTAbLe fOR MOUNTiNg ON fURNiTURe

SUSPeNded OR ReceSSed

eMeRgeNcy LUMiNAiRe (OPTiONAL ON SOMe iTeMS)

cLASS i (PROTecTiVe eARTH)

SHORT-ciRcUiT-PROOf SAfeTy iSOLATiNg TRANSfORMeR

fAiL SAfe, SHORT-ciRcUiT-PROOf SAfeTy iSOLATiNg TRANSfORMeR

PAcKAge MAde fROM RecycLed MATeRiALS

weee diRecTiVe – iTeM SHOULd NOT be diSPOSed Of ViA NORMAL wASTe SySTeM

MR16 LAMP

cdM MH LAMP

cfL LAMP

Led LigHT SOURce

diMMAbLe (OPTiONAL ON SOMe iTeMS)

eLecTRONic cONTROL geAR

iNTegRAL cONTROL geAR

ReMOTe cONTROL geAR

TRANSfORMeR fOR cLASS iii LUMiNAiReS

ce MARK

cLASS ii cONSTRUcTiON (dOUbLe iNSULATed)

cLASS iii cONSTRUcTiON

diRecTiONAL AdjUSTAbLe

TiLT AdjUSTAbLe

7.2

enVironment statement ibL Lighting has long realised the need to reduce its carbon footprint on the environment. Around the world inefficient light sources are being phased out and replaced with efficient low energy technologies, which will contribute in the reduction in c02 carbon emissions. Our new range of Led lighting fixtures and low energy ecOSeal downlights embrace this ethos and provide vast savings in terms of energy reduction and maintenance.

careful thought and consideration has been given to packaging, to ensure that both the manufacturing and disposal is environmentally friendly. At ibL we are serious about covering all aspects on an ecological basis and are registered members of Lumicom.

RECYCLE REDUCEDco2


Documents

ibl.co · 5.5.0 H f e lectronic Transformers ( eT) ... 6.2.0 b Array 6.2.1 c Array ... 210X.XXX7 Fixed round Alume with 7 chip LED 14W 2.7K,