Upload
trevor-joseph
View
221
Download
0
Embed Size (px)
Citation preview
I T Essentials IChapter 3
JEOPARDY
ConnectorsComputer Assembly
Computer Basics
Boot Sequence
Potpourri
100 100 100 100 100
200 200 200 200 200
300 300 300 300 300
400 400 400 400 400
500 500 500 500 500
Connectors 100
A technician is installing a new power supply in a computer. Which type of power connector should be used to connect to PATA hard drive?
1. Berg2. Mini-Molex3. Molex4. 20-pin ATX connector
What is Molex
Connectors 200
What is Berg
A technician is installing a new power supply in a computer. Which type of power connector should be used to connect to a floppy drive?
1. Berg2. Molex3. 20-pin ATX connector4. SATA connector
Connectors 300
What is 7
When installing SATA devices, how many pins are in a SATA data cable connector?
1. 72. 343. 404. 805. 184
Connectors 400
What is AUX
Which additional 4-pin or 6-pin power connector is required by some motherboards?
1. AUX2. Berg3. Parallel4. SCSI
Connectors 500
What is 15-pin
How many pins are in a SATA power connector?
1. 34 –pin2. 15-pin3. 9-pin4. 4-pin
Computer Assembly100
What is hard drive and floppy drive
When building a computer, which two components are normally installed in 3.5-inch drive bays? (Choose two)
1. Hard drive2. Optical drive3. Floppy drive4. Flash drive5. Video card
Computer Assembly200
What is locking lever
A technician is installing a new CPU in a ZIF socket on a motherboard. What is the primary way of securing the CPU in the place?
1. Thermal compound2. Thermal pad3. Locking lever4. screws
Computer Assembly300
What is CPU and Memory
A technician is assembling a new computer. Which two components are often easier to install before mounting the motherboard in the case? Choose two)
1. CPU2. Memory3. NIC4. Sound Card
Computer Assembly400
What is option 4
A technician has been asked to install a floppy drive that will have the drive letter B. How can this task be accomplished by the technician?1.Assign the drive letter in BIOS2.Can be configured using jumper settings on the drive3.Should be connected using the second floppy drive controller4.Can be connected to the middle connector of a three connector floppy drive cable.
Computer Assembly 500
What is DVD drive
Which drive is installed in 5.2-inch drive bays and can be accessed without opening the case?
1. Hard drive2. DVD drive3. Floppy drive4. SCSI drive
Computer Basics100
What is option 3
A technician is troubleshooting a malfunctioning floppy drive and observes that the floppy drive light remains lit constantly. How should the technician attempt to repair the problem?1.Remove the floppy drive using Add/Remove hardware2.Replace the floppy drive3.Connect the data cable making sure the colored stripe is aligned with pin 1 on the drive and the motherboard4.Change the jumper setting to master for the floppy drive
Computer Basics 200
What is PCIe and PCI
A field technician is installing a wireless 802.11g NIC in a computer, but is unsure about the expansion slots available. Which two types of wireless NICs should the technician have available? (Choose two)
1. PCIe2. AGP3. SCSI4. PCI5. SATA
Computer Basics 300
What is to help keep the CPU cool
Why do some technicians put thermal compound on the CPU before installing it?
1. To help keep the CPU in place2. To keep someone from stealing it3. To help keep the CPU cool4. To increase the speed of data transfer
Computer Basics 400
What is Computer and Display Monitor
A video adapter card is the interface between what?1.Computer and display monitor2.Computer and the printer3.Motherboard and the display monitor4.Computer and the graphics software
Computer Basics 500
What is option 2
What is the functionality of a wireless NIC?1.To provide the enough bandwidth to transfer data over the internet2.Enables a computer to connect to a wireless network3.It is the interface between the computer and motherboard4.It provides the means to increase your processor speed
Boot Sequence100
What is BIOS
What system runs a test of the internal components?
1. Motherboard2. CMOS3. BIOS4. POST
Boot Sequence200
What is POST
What is the system test of internal components called?
1. POST2. CMOS3. Boot Sequence4. Hardware configuration
Boot Sequence300
What is it initiates the proper beep code
What happens when POST finds a problem?1. It shuts down the computer2. It initiates the proper beep code3. It sends the error code message to the
motherboard manufacturer4. Uses backup files to automatically repair the
problem
Boot Sequence400
What is in the BIOS setup program
If you wanted to change some of the computer system settings, where would you do it?
1. You can’t, you have to call the motherboard manufacturer
2. In the control panel under “system settings”3. In the BIOS setup program4. In the POST setup program
Boot Sequence 500
What is CMOS
The configuration settings data for the hardware components on your computer are saved here.
1. CMOS2. BIOS3. DIMM4. RIMM
Potpourri 100
What is the expansion slots on the motherboard
Adapter cards must be compatible with what?1.The operating system 2.The display monitor3.CPU4.Expansions slot on the motherboard
Potpourri 200
What is False
Adding more RAM to your computer will have little effect on the performance of your computer.
1. True2. False
Potpourri 300
What is option 3
Why would you want to update your video adapter card?
1. To improve the longevity of your display monitor2. There is no reason to update your graphics card. It
will provide little benefit.3. To provide better graphics capabilities for games
and graphics programs.4. To increase the speed of your computer by using
less resources.
Potpourri400
What is USB
Which port is typically used for external wireless NICs?
1. Parallel2. PS/23. SCSI4. USB
Potpourri500
What is isopropyl alcohol
Which solution should be used to clean a CPU and heat sink?
1. Soap and water2. Rubbing alcohol3. A diluted ammonia solution4. Isopropyl alcohol
Double Jeopardy
A: What is PATA?
What cable connects the optical drive to the motherboard?
1. Berg2. Molex3. PATA4. SATA
Double Jeopardy
Subject: Connectors