H180-230XD-EC/DEMPTY CONTAINER HANDLER

WWW.HYSTER.COM

2

The Hyster® H180-230XD-EC/D series benefits from

over 50 years of heritage in container handling and

spreader design. These empty container handling

machines offer fast handling, reliable proven

components, and give an excellent return on your

investment.

Hyster H180-230XD-EC/D empty container handlers

can handle up to 23,000lbs capacity, allowing the trucks

to easily pick two 40-foot reefer units at once. These

trucks are designed to perform and last while handling

the heaviest double container loads. With components

designed for double handling, imagine what they can do

in your single handling application.

You will appreciate the performance from the powerful

and efficient Cummins QSB 6.7L engine and reliable ZF

5WG 211 transmission. The productivity benefits that

come from Hyster single or double spreader give you

more options than ever to move additional containers

in less time. Features such as powered pile slope,

automatic extend-retract of the spreader, auto throttle

up and true inching allow for safe, accurate and smooth

positioning of containers – even up to 9-high.

RELIABILITY IN CONTAINER HANDLING

3

PERFORMANCE IS KEY

The Tier 4 Final Cummins QSB 6-cylinder diesel

engine delivers 231 peak HP and 770 lb-ft of

maximum torque, featuring cooled exhaust gas

recirculation (EGR) technology with selective

catalytic reduction (SCR) and an integrated diesel

exhaust fluid (DEF) delivery system. A 2-stage

diesel oxidation catalyst (DOC) is also included for

particulate matter (PM) reduction.

Innovative selectable ECO performance modes,

plus the 5-speed transmission and variable

displacement pumps, offer excellent fuel economy

and maximum productivity providing up to 15%

fuel consumption reduction versus previous Tier 3

powered trucks. Hibernate idle can also save fuel

by lowering engine speed when functions are not

being used.

Automatic engine shutdown saves fuel by

shutting down the engine if the driver leaves the

seat or the engine idles for too long, after a pre-

set (adjustable) time. On-demand hydraulics

keep oil temperature lower to protect hydraulic

components. Plus an optional hydraulic

temperature protection system is available to

derate the truck when the temperature threshold is

reached.

TIER 4 FINAL INTEGRATED POWERTRAIN

Cummins QSB 6-cylinder diesel engine delivers

231 peak HP and 700 lb-ft of maximum torque.

• ZF 5-Speed 5WG 211 powershift transmission

• Wastegate turbocharger, water cooled

• Automatic throttle-up

• On-demand hydraulic system

• 24V electrical system with 120 amp alternator

TIER 3 (Not available in US OR Canada)

• The drive train protects itself from excessive

temperatures and pressures:

– high coolant temperatures and low levels

– high air intake temperatures

– low engine oil pressure

– high transmission oil temperatures and low

pressure

• Variable geometry turbocharger, water cooled

• Rugged and capable ZF 5-speed 5WG 211

powershift transmission with proven field

experience and reliability

• 24V electrical system with 120 amp alternator

• Automatic throttle-up on hoist and tilt enables

engine to operate in most efficient rpm range

4

THE RIGHT SPREADER FOR YOUR OPERATION

A comprehensive selection of single and double handling

spreaders are available, featuring vertical twistlocks or hook & side

clamps, to suit your specific application. These spreaders allow

operations to handle most common types of containers including

ISO, WTP and domestic containers.

Ample sideshift allows operators to easily resposition offset loads and handle two reefers with the gen set on the same side.

The innovative spreader design enables the operator to see the twistlocks or hooks in every load position.

The optional auto extend-retract feature further assists operators by adjusting the spreader to a 20ft or 40ft container size at the touch of a button.

Smart camera systems are available for additional operator support.

Centralized greasing on the spreader reduces the number of grease points for easier maintenance.

5

Container sensing system supports safe handling when transporting two containers.

6

Hyster Company is known for tough lift trucks, but we’re also recognized for ergonomically advanced lift trucks. A spacious, comfortable operator environment and an operator interface with ergonomically designed controls helps elevate productivity while minimizing operator fatigue.

OPERATOR COMFORT

The H180-230XD-EC/D series operator cab provides a

spacious cockpit style cabin that keeps all truck information

and controls within reach.

A variety of seat configurations are offered to suit operator

preference including mechanical or air suspension, cloth or

vinyl cover, lumbar support and ventilated or heated seats.

The air conditioning system can be pre-set for automatic

climate control and the high and rear louvers provide direct

air flow toward the operator.

The ergonomically designed, seat-mounted control

arm is fully adjustable and includes a wrist cushion and

redesigned joystick to help reduce fatigue when operating

the hydraulics. The intuitive joystick, integrated in the

armrest, is designed for simplicity to provide easy, precise

operation of the mast and spreader. The modular design

of the control arm makes it possible to cover almost any

possible truck configuration while being easily serviceable.

The reliable CANBUS controls all main components.

The new 7” full color, touchscreen Integrated Performance

Display shows all truck activity, allows for easy access to

change or calibrate truck settings and is integrated with

Hyster Tracker telemetry system.

Optional secondary display available specifically for double handling.

AC vents

Deluxe air seat options available

HD Joystick

XD Joystick

7

VISIBILITY

Superb visibility through the mast allows

easy positioning of containers at any

height for more precise and efficient load

handling. Optional raised cabin allows the

operator to view and inspect the top of the

container when positioned on a chasis.

The cab’s structural design, curved

tempered glass windshield and scratch

resistant top glass creates optimum

visibility for container stacking. Rearward

visibility is outstanding with the cab

location engineered to enable sweeping

views over both the left and right shoulders.

Optimize the operator's vantage

point with the optional automatic

tip-up cab which can provide

greater operator comfort when

stacking containers above 4 high.

Smart camera options and radar

systems are also available to assist

in visibility of key areas.

8

SIMPLIFIED SERVICEABILITY

Hyster® trucks have been designed with the service technician

in mind. Easy access to the engine, hydraulics and other major

components are enabled with a large hinged hood and lift

off front covers. The tip back cabin provides ample service

access to components located under the cabin.

Daily operator checks are completed with ease given the

ready access to all checked items, filter indicators and sight

glass on hydraulic oil tank. Preventative maintenance service

interval is 500 hours. Hydraulic oil service interval can be

extended to 10,000 hours using regular oil sampling. The

integrated performance display offers high-level on-board

diagnostics allowing for advanced and quick troubleshooting

without having to connect a laptop to the truck.

ADDITIONAL ENHANCEMENTS• Broad, slip resistant running boards

• Optional utility toolbox and storage compartment

• The hydraulic oil tank features a sight glass and magnetic

drain plugs for ease of maintenance

• Clean hydraulic hose and electrical harness routing and

clamping

An optional automatic

greasing system is

available. Automatic

greasing will significantly

lower total cost of

ownership by eliminating

maintenance costs of

manually greasing each

component. By ensuring

that greasing is completed,

component service life can

be extended.

AUTOMATIC GREASING

Take your fleet operation to the next level with wireless asset management from Hyster,

standard on all Hyster Big Trucks. Hyster Tracker provides a scalable solution for fleets.

From monitoring truck utilization to limiting operator

access, Hyster Tracker allows you to track your

fleet at your fingertips.

HYSTER TRACKER: WIRELESS ASSET MANAGEMENT

TRACKER

9

Optional utility toolbox and storage compartment

Broad, slip resistant running boards

TRAVEL SPEEDS12.4 mph (20 km/h) - laden

15.5 mph (25 km/h) - unladen

LIFTING SPEEDS91 ft/min (0.46 m/s) - laden

122 ft/min (0.62 m/s) - unladen

LOWERING SPEEDS108 ft/min (0.55 m/s) - laden

108 ft/min (0.55 m/s) - unladen

HEAVY DUTY PRODUCTIVITY

Hyster® H180-230XD-EC/D container handling trucks deliver high

productivity with 4-mode average speeds* of 107 ft/min (0.54 m/s),

competitive in the industry at rated laden container handling capacities.

For optimal performance and durability, the variable lap mast features:

• significantly lower load roller forces

• less mast deflection

• higher torsional rigidity

• heavy duty 2 chain system with large diameter sheaves

This design enhances structural strength, contributing to lower costs

and reducing downtime.

*Average speed calculated using: laden lift speed (ft/min) at full rated capacity; unladen lift speed; laden lowering speed at full rated capacity; unladen lowering speed.

10

11

Service — Your local Hyster® dealer offers a flexible, customized and comprehensive maintenance plan based on each lift truck’s operation environment. Hyster service programs offer scheduled inspections and maintenance, along with quick, responsive service dispatched to your location.

For nearly 90 years, Hyster has conquered the world’s most demanding applications. In the 1920s Hyster started as a manufacturer of lifting machines used in the rigorous logging industry of the United States’ Pacific Northwest. A few years later the first forklift trucks were invented and the Hyster brand quickly gained its reputation for rugged quality. Hyster® lift trucks are designed to lower your cost of operations. Every truck we make — whether powered by gasoline, LPG, diesel, lead acid, CNG, lithium-ion or hydrogen fuel cells — is purpose-built to excel in its application. Every truck is also backed by an unmatched network of specialists.

Special Products Engineering Department (SPED) — Different materials require different handling. That’s why we can work with you to customize your lift trucks. From strobe lights to specially made forks, SPED has the tools to help you get the job done right.

Hyster Capital — We can arrange solutions for special financing requirements, taking the difficulties out of buying the equipment you need. Whether you purchase or lease a new or used lift truck, Hyster Capital offers superior service and competitive rates.

Rental Products — When leasing or buying isn’t a practical option, we have access to more than 14,000 units for short- and long-term rental. We’ll help you maintain output in a cost-effective manner.

Parts — With genuine Hyster® replacement parts and UNISOURCETM parts for all makes of lift trucks, we are your one-stop source for lift truck parts. In fact, we offer more than 7 million part number crosses for most brands of materials handling and other in-plant mobile equipment.

Hyster Fleet Services — Even if you operate other brands, we can manage your maintenance and replacement plan. We can offer complete fleet analysis, fleet history summary and a cost-effective proposal for replacement and scheduled maintenance.

Operator Training — Proper education in operating lift trucks minimizes the risk of injuries due to accidents while increasing productivity. Hyster offers OSHA-compliant materials that support the training of qualified operators.

Dealer Network — Our Dealer Network can offer the expertise of fleet managers, parts suppliers, capital procurement specialists and trainers. Carefully chosen dealers fully understand customer applications, assist in selecting the right lift truck and provide fast, reliable support.

SPED

�

INNOVATIVE TRUCKS ENGINEERED TO MEET THE MOST DEMANDING APPLICATIONS

Hyster CompanyP.O. Box 7006Greenville, North Carolina27835-7006Part No. H180-230XD-ECD/B7/2020 Litho in U.S.A. Trucks may be shown with optional equipment. © 2020 Hyster Company. All rights reserved.

Hyster, and STRONG PARTNERS. TOUGH TRUCKS. are registered trademarks in the United States and certain other jurisdictions. Hyster products are subject to change without notice.

Visit us online at www.hyster.com or call us at 1-800-HYSTER-1.