Mk1 Hot-Head Filament Extruder
3D Print ABS / PLA / Nylon laments with ease on any HYREL 3D
Printer
Karls app note:
This extruder went through many, many revisions un$l we were
sa$sed with the quality, consistency / reliability, and ease of
use. Control of the lament was greatly increased and removing
& replacing the lament has been made much easier, with less
lament purging needed. Even going from ABS to PLA to Nylon and
back is safe and easy to do with this extruder.
Key Features: Consistent, reliable lament extruder
Excellent quality of prints
Plug-In-Play Electronics (HIB System)
Easy to Change Filaments
Hi-Torque Stepping Motor
Easy-to-Use
1.75 mm Filament
Easily changeable $p
Easily changeable heater element
Video Links Available via www.hyrel3d.com
What is included? Mk1 Moun$ng System
Hyrel Interchangeable Board (HIB) System
Hi-Torque Stepping Motor
Integrated Incoming Material Cooling Fan
0.5 mm Nozzle
Installa!on: Diculty: Novice
Time: 1-2 minutes
Tools Needed: Hands
Price: $250 USD
[email protected]
Hy.Rel
Phone#: (404)-914-1748
HYREL Mk1 Hot-Head Extruder
High Reliability 3D Printers
Tech Specs:
Mk1 Extruder ChassisAnodized Aluminum
Stepping Motor
1 Quiet, Long-Las$ng, Ball-Bearing Fan
Hyrel Interchangeable Board (HIB) System
Compa$ble with all HYREL Printers
Max Temperature: 260C (Limited-life)
0.5 mm Nozzle
Material Compa$bility:
ABS, PLA, and Nylon (Taulman-based)
1.75mm lament only
How to Order:
Order Online at www.hyrel3d.com
Via Email at: [email protected]
Over the phone at: (404)-914-1748 (US only)
Via Skype at: Hy.Rel We accept all major credit cards via
PayPal
We accept personal and business cheques & cash payments
Wire Transfers accepted on request (and internal approval) Lead
$mes depend upon all items ordered.
Warranty, Service, & Support:
Our Warranty Policy is contained within our Ordering Terms,
Policies, and Condi$ons here: www.hyrel3d.com/terms/
We are commiKed to providing the best customer service and
support possible.
If you have any ques$ons at any$me, please do not hesitate to
contact us here:
[email protected]
404)-914-1748 (US Shop Phone)
Hy.Rel (Skype)
We also have a community forum available at:
www.hyrel3d.com/forum-general/
Out-of-the-box:
Weight: ~1 lbs / 0.46 kgs
Length: 1.175 in / 30 mm
Width: 5 in / 127 mm
Height: 7 in / 178 mm (Max)
Accessory Compa!bility Matrix with the following HYREL 3D
Printers:
Physical Dimensions:
Tinkerer (E1) Hobbyist (E2) Appren$ce (E3) Journeyman (E4)
Professional (E5) System
Mk1
EMO-25
Quiet Storm
Inspector
Old School
Metrology
DigiTram
Calibra$on Tool
WatchMaker
Work Light
3D Scanner
