2
Hyper & Multi spectral imaging 1 Condor 1 Foveon 1 - Is exact color measurement or analysis the core of your machine vision requirements? - Does the demosaicing process of single-chip Bayer color filter arrays cause unacceptable visual artefacts? - Are you looking for 2D imaging techniques producing absolute color accuracy? We offer 2 Techniques capturing red, green, and blue light simultaneously at each pixel location. Condor 3 RGB + Condor 3 CIE 2 The Foveon technology takes a very different approach to sensor design than any other company out there. A 3-layer CMOS technology captures red, green, and blue light simultaneously at all pixel locations across the entire sensor surface. The other technique, using prism based 3-CCD imaging technology, is provided by our Condor³ RGB range. A specific R, G, and B value is captured for each pixel. In contrast with Bayer color cameras using interpolation routines, 3-CCD results in more accurate per-pixel color values. In addition, because there is no interpolation, 3-CCD images offer more precise spatial resolution, enabling more accurate edge detection.. On the High-end of our color measurement solution spectrum we offer our Condor³ CIE 3- channel Beam Split Prism camera with X-Y-Z filtering. As there are different color spaces, the most desirable of these in the measuring of color is the L*a*b* color space due to the uniform distribution of colors, and because it is very close to human perception of color. “Lab” is now more often used as an informal abbreviation for the L-a-b representation of what is often referred to as the CIE 1931 color space. Achieving True Color Fidelity

Hyper & Multi spectral imaging 1 Condor 1 Foveon -Is exact color measurement or analysis the core of your machine vision requirements? -Does the demosaicing

Embed Size (px)

Citation preview

Hyper & Multi spectral imaging1

Condor1

Foveon

1

- Is exact color measurement or analysis the core of your machine vision requirements?

- Does the demosaicing process of single-chip Bayer color filter arrays cause unacceptable visual artefacts?

- Are you looking for 2D imaging techniques producing absolute color accuracy?

We offer 2 Techniques capturing red, green, and blue light simultaneously at each pixel location.

Condor3

RGB +

Condor3

CIE

2

The Foveon technology takes a very different approach to sensor design than any other company out there. A 3-layer CMOS technology captures red, green, and blue light simultaneously at all pixel locations across the entire sensor surface.

The other technique, using prism based 3-CCD imaging technology, is provided by our Condor³ RGB range. A specific R, G, and B value is captured for each pixel. In contrast with Bayer color cameras using interpolation routines, 3-CCD results in more accurate per-pixel color values. In addition, because there is no interpolation, 3-CCD images offer more precise spatial resolution, enabling more accurate edge detection..

On the High-end of our color measurement solution spectrum we offer our Condor³ CIE 3- channel Beam Split Prism camera with X-Y-Z filtering. As there are different color spaces, the most desirable of these in the measuring of color is the L*a*b* color space due to the uniform distribution of colors, and because it is very close to human perception of color.

“Lab” is now more often used as an informal abbreviation for the L-a-b representation of what is often referred to as the CIE 1931 color space.

Achieving True Color Fidelity

2© 2014 Quest Group B.V.Hyper and Multispectral Imaging

Condor1 Foveon

Condor3 RGB-692/ CIE-692

Sensor Foveon X3 3x Sony ICX692 (others possible)

Active area 1” CMOS1/3” CCD x 3RGB Prism / BS prism + 3 X-Y-Z filters

Pixel size 7.8 x 7.8 μm 4.08 x 4.08 µmPixel clock 20 / 40 MHz 36 Mhz

Active pixels 14MP; 2688 x 1792 x 3 layers

2.8MP;1280 x 720 x 3 sensors

Frame rate 5 FPS full resolution 38 FPS full resolutionDynamic Range >60 dB >60dB

Bit depths 8 bit 3 channel, 12 bit 3 channel

8 bit 3 channel, 12 bit 3 channel

Video output CL Base/ GigE / USB 3.0 CL Base/ GigE / USB 3.0

Trigger modesInternal and external source (on Camera Link and Hirose connectors)

Internal and external source (on Camera Link and Hirose connectors)

Electronic shutter Rolling shutter/ Global Reset Global shutter

Artifacts

Color

Sharpness

Foveon or 3-CCDBayer sensor

Bayer sensor

When exact color measurements on every pixel are the core of your machine vision requirements, our 3 Layer CMOS or 3 CCD cameras are what you need.

Foveon made history when it developed and patented the world’s first three-layer image capture technology, placing a stack of RGB pixels in each pixel location. As a result, Foveon sensors detect all three primary colors in every pixel location, producing images that are sharper and have significantly reduced image artifacts compared to competing image sensor technologies.

Similar benefits are attained using our prism technology based 3-CCD cameras capturing specific R, G, and B values for each pixel without any interpolation.

Foveon or 3-CCD

2D Color Analysis

Foveon or 3-CCDBayer sensor