Embed Size (px)
Citation preview
Bottom Loading Hydrogen Purging Furnace (BLF - H - 1700)
Maximum Temperature : 1700°C
Working Chamber* : 130 x 130 mm
Controller : PID Temperature Controller
Controlling sensor : Thermocouple “B” type
Heating element : “U” MoSi2 Heating element
Insulation : Multiple layers of high temperature fiber
insulation boards ensure minimum heat
loss.
Flages : Water Cooling Flanges with viton “O” ring
Time to reach max : 1.5 Hr temperature
Temperature uniformity : approx +/- 5°C
Bottom lifting arrangement : Bottom lifting platform with D.C motor
ensures smooth lifting and lowering of
material
Total lift movement : Approx 200mm
Outer Construction : CRCA sheets duly powder coated.
Power supply : 230V AC, 50 Hz
* Customized chamber size available on request.
General Information
Bottom loading furnace BLF - H - 1700 is a hydrogen purging furnace with inner tube dimension 100 mm (ID),
115 mm (OD) & 280 mm length. Hydrogen gas is purged in presence of vacuum at 1700°C and sample is being
tested. It is a special furnace, which is made to use in reducing atmosphere. Bottom loading furnaces are
designed for uniform thermal distribution inside the chamber and for easy loading and unloading of sample with
help of lifting arrangement.
Advantages
1. Easy loading and unloading of sample
2. Uniform Temperature distribution inside chamber
3. Fast Cooling
4. Low heat loss
5. smooth lifting arrangement
Applications
It is a special type of furnace which is made to
use for reducing atmosphere.
Specifications
Tempsens Instruments (l) Pvt. Ltd. U#llA-190, Road No.5, M.I.A., Udaipur-313003 (Rajsthan) INDIA
Ph.:+91-294-3052962, 3052959, Fax.:+91-294-3052950
Email: [email protected]
www.tempsens.com
