Embed Size (px)
Citation preview
HYDRO 3000
The Next Generation of Hydrotest Monitoring
HYDRO 3000The next generation of hydrotest monitoring instrumentation
Aquatec has a long history of innovation and was founded in 1990 by the current managing director as a specialist consultancy in oceanographic design. Since then, the company has established a diverse portfolio of products for the measurement of oceanographic and process parameters, as well as establishing a range of services including instrument and communication design. Hydrotest monitoring has been a core element of our product offering for over 10 years.
Hydrotest Monitoring
To demonstrate a successful hydrotest, a continuous record of pressure is required. Aquatec provides logging and real time systems: from subsea instrumentation and data communication to the report that gives a permanent record of the test.
Once the pipeline under test has been sealed, the internal pressure may vary with temperature – caused for example by tidal fronts. It is important to be able to record temperature variations during the hydrotest so that any temperature-related cyclic or step pressure changes can be correctly correlated to temperature. All HYDROlog instruments include temperature measurement, including a range of temperature-only instruments that can be used to gather temperature data at additional locations along the pipeline. Loggers with external temperature probes are available for fast response times in dynamic environments.
The Next Generation
Following the success of the reliable and popular HYDROlog 2000 hydrotest logger, Aquatec Group is proud to announce the launch of the next generation of hydrotest monitoring equipment – HYDRO 3000.
The range features high accuracy hydrotest loggers, including gauge and twin test pressure models, as well as flow monitoring instruments.
1
Train or test on deck with...
HYDROlog 3100
• Core functionality of HYDROlog 3000 subsea units in a compact and durable case
• Internal batteries supplied if no external power source is available• Optional integral tablet, giving a completely self-contained system
Measure test pressure with...
HYDROlog 3000PT
• Test pressure to 1400bar• 1/4” NPT, BSP or Autoclave connection• Ambient temperature• Maximum 4000m depth• Logging and real time
Also available• HYDROlog 3000PgT for measuring gauge pressure• HYDROlog 3000PPT for measuring two test pressures from one logger
Aquatec’s Hydrotest Monitoring RangeStandalone instruments or connect to build a system
Measure flow with...
HYDROlog 3000F
• Monitor one external flow sensor• Test pressure to 1400bar• 1/4” NPT, BSP or Autoclave connection• Ambient temperature• Maximum 4000m depth• Logging and real time
2
Monitor with...
HYDROgauge
• Test pressure to 1000bar• 1/4” NPT, BSP or Autoclave connection• Maximum 1000m depth• Light activation
Visualise with...
AQUAdisp
• Subsea digital display• Low power LCD screen showing figures and graphs• Maximum 4000m depth• Light activation
Communicate with...
AQUAmodem Op2
• Short range interrogation, commanding and data download• Compatible with any instrument with an RS232 serial interface• Maximum 3500m depth
Monitor with...
HYDROskid
• Compact hydrotest monitoring skid• Measures test pressure to 1000bar• Configure and download data subsea with AQUAmodem
Op2• View data in real time with AQUAdisp subsea display• Maximum 3500m depth
Aquatec’s Hydrotest Monitoring RangeStandalone instruments or connect to build a system
3
HYDROlog 3000PT High accuracy hydrotest logger
KEY FEATURES
High accuracy and precision pressure• ±0.05%FS accuracy• ±0.01%FS precision (to 1000bar), ±0.05%FS precision (to 1400bar)• A variety of sensor options available – 300bar, 600bar, 1000bar, 1200bar, 1400bar
Flexible deployment• All instruments log data internally and have real time reporting capability as standard• Choose your sampling regime with continuous and burst sampling options• Rated to 4000m, covering typical subsea operations
Durable and robust• Manufactured from 316 Stainless Steel, the logger is designed for the rigours of operational use.• All loggers are fitted with sacrificial anodes to reduce the risk of corrosion on long deployments.• Connectors and anodes are shielded from knocks and are housed within the 60mm diameter
instrument.
Designed with operational efficiency in mind• Deployment wizard to allow quick and easy logger set up• Test data outputs as an industry standard csv file and report• Easily transportable with alkaline and NiMH battery options• Faster download via the new AQUAmodem Op2 optical modem, serial cable or USB on the surface
Hassle-free maintenance• User-changeable standard AA size batteries available across the world – purchase locally or order
direct from Aquatec• Service and support plans available at time of purchase or at any time during ownership
Easily integrated into your subsea equipment• Compact logger measuring only 60mm in diameter and 310mm in length• Self-contained logger that runs on internal power – external power input or external battery pack
supported• No protrusions for easy mounting• Compatible with the AQUAdisp subsea display, AQUAmodem Op2 optical modem and AQUAswitch
ROV/diver switch
The latest hydrotest logger from Aquatec…
…measuring high accuracy test pressure and ambient temperature
The HYDROlog 3000PT instrument forms the core of the new HYDRO 3000 range of hydrotest monitoring instrumentation. It is a compact logger measuring test pressure to 1000bar and ambient temperature to depths of up to 4000m. The integral pressure sensor has ±0.05%FS accuracy and ±0.01%FS precision. New features include enhanced memory and faster download. With increasingly stringent lithium battery shipping regulations, the HYDROlog 3000 overcomes potential transit issues by using standard field-replaceable batteries available across the world. Users can choose the type of battery most suitable for each deployment, whether alkaline, lithium or rechargeable.
The HYDROlog 3000 is available in two additional models - one measuring gauge pressure, and one measuring two test pressures in a compact and efficiently designed instrument. The family of data loggers all feature the intuitive AQUAtalk software and self-contained compact design, and are compatible with the new higher speed AQUAmodem Op2 optical modem.
4
The new flow monitoring logger from Aquatec…
…measuring an external flow sensor, test pressure and ambient temperature.
HYDROlog 3000F Flow monitoring logger
KEY FEATURES
The simple way to monitor flow• Standard instrument monitors one external flow sensor – TTL or sine wave• Live sensor view via AQUAtalk when connected• Multiple flow sensors and pressures can be monitored with the HYDROlog 3000Fc custom range,
which utilises Aquatec’s innovative smart sensor interface. • Example configuration: 8 flow sensors (measuring flow and concentration) and 3 external pressures
High accuracy and precision pressure• ±0.05%FS accuracy• ±0.01%FS precision (to 1000bar), ±0.05%FS precision (to 1400bar)• A variety of sensor options available – 300bar, 600bar, 1000bar, 1200bar, 1400bar
Flexible deployment• All instruments log data internally and have real time reporting capability as standard• Choose your sampling regime with continuous and burst sampling options• Rated to 4000m, covering typical subsea operations
Durable and robust• Manufactured from 316 Stainless Steel, the logger is designed for the rigours of operational use.• All loggers are fitted with sacrificial anodes to reduce the risk of corrosion on long deployments.• Connectors and anodes are shielded from knocks and are housed within the 60mm diameter
instrument.
Designed with operational efficiency in mind• Deployment wizard to allow quick and easy logger set up• Test data outputs as an industry standard csv file and report• Easily transportable with alkaline and NiMH battery options• Faster download via the new optical modem or serial cable
Hassle-free maintenance• User-changeable standard AA size batteries available across the world – purchase locally or order
direct from us• Service and support plans available at time of purchase or at any time during ownership
The HYDROlog 3000F is a new flow monitoring logger and is part of the HYDRO 3000 generation of hydrotest monitoring equipment. It is a compact logger that monitors one external flow sensor, and is both TTL and sine wave compatible. Test pressure to 1000bar and ambient temperature are also measured to depths of up to 4000m. The integral pressure sensor has ±0.05%FS accuracy and ±0.01%FS precision. With increasingly stringent lithium battery shipping regulations, the HYDROlog 3000F overcomes potential transit issues by using standard field-replaceable batteries available across the world. Users can choose the type of battery most suitable for each deployment, whether alkaline, lithium or rechargeable.
The HYDROlog 3000F features the intuitive AQUAtalk software and self-contained compact design, and are compatible with the new higher speed AQUAmodem Op2 optical modem.
5
Measure pressure with precision using the HYDROgauge…
…displaying your data in real-time.
HYDROgauge High accuracy digital pressure gauge
The HYDROgauge is a high accuracy subsea pressure gauge, rated to 1000m depth and 1000bar test pressure. The integral pressure sensor has ±0.05%FS accuracy and ±0.01%FS precision.
With increasingly stringent lithium battery shipping regulations, the HYDROgauge overcomes potential transit issues by using standard field-replaceable batteries available across the world. Users can choose the type of battery most suitable for each deployment, whether alkaline, lithium or rechargeable.
KEY FEATURES
High accuracy and precision pressure• ±0.05%FS accuracy, ±0.01%FS precision• A variety of sensor options to optimise the specification – 300bar, 600bar, 1000bar
Long lasting performance• The HYDROgauge is designed with a low power display, making it ideal for sustained subsea
deployments.• The instrument can operate continuously for up to 15 days, depending on the setup.
Innovative design• The readings are presented on Aquatec’s new display, which can show up to 16 parameters over 4
screens. Data can also be presented graphically (on 16 graphs), with the last 33 measurements being shown on each compact plot.
• The user-friendly design means the HYDROgauge is simple to activate and deactivate using the optional magnetic switch.
• As standard batteries are used in the instrument, operators can replace batteries with ease, speeding up turnaround between deployments.
6
HYDROlog 3100 Hydrotest logger - deck
Deck versions of the latest hydrotest loggers from Aquatec…
…making surface training, testing and onshore hydrotesting cost-effective and efficient.
The HYDROlog 3100 instruments take the core functionality of the new HYDROlog 3000 subsea units and combine them with robust cases and user friendly interfaces to create deck versions. This allows surface training and testing to be completed with ease, as well as making onshore hydrotesting cost-effective and efficient. Available in a variety of models, the new deck logger range is a valuable tool for testing.
The rugged cases contain a single panel with all connectors in the interior, making it easy to transport without damage. The instruments are available with an optional integrated tablet, removing the need for a separate PC. If external power is not available, the HYDROlog 3100 can be supplied with internal batteries.
The HYDROlog 3100PT measures test pressure to 1000bar and ambient temperature, and the integral pressure sensor has ±0.05%FS accuracy and ±0.01%FS precision. The HYDROlog 3100PT is available in two additional models - one measuring gauge pressure, and one measuring two test pressures in the same compact and efficiently designed instrument.
The HYDROlog 3100F is a flow monitoring logger with additional test pressure and ambient temperature sensors. The standard model monitors 1 external flow sensor, and custom options are available for multi-channel flow monitoring.
KEY FEATURES
High accuracy and precision pressure• ±0.05%FS accuracy• ±0.01%FS precision (to 1000bar), ±0.05%FS precision (to 1400bar)• A variety of sensor options available – 300bar, 600bar, 1000bar, 1200bar, 1400bar
The simple way to monitor flow (HYDROlog 3100F model)• Standard instrument monitors one external flow sensor – TTL or sine wave• Live sensor view via AQUAtalk when connected• Multiple flow sensors and pressures can be monitored with the HYDROlog 3100Fc custom range,
which utilises Aquatec’s innovative smart sensor interface. • Example custom configuration: 8 flow sensors (measuring flow and concentration) and 3 external
pressures
Robust and efficient design• Core functionality of HYDROlog 3000 subsea units in a compact and durable case• Contains single panel with all connectors in the interior, shielded from knocks and making transport
easy• Internal batteries supplied if no external power source is available• Optional integral tablet, giving a completely self-contained system
Flexible deployment• All instruments log data internally and have real time capability as standard• Choose your sampling regime with continuous and burst sampling options
Designed with operational efficiency in mind• Deployment wizard to allow quick and easy logger set up• Test data outputs as csv file and report• Easily transportable with alkaline and NiMH battery options
7
Download your data
AQUAmodem Op2
• Short range interrogation, control and data download
• Topside real time view
View your data in real time
AQUAdisp
• Subsea digital display• Low power LCD
screen showing figures and graphs
Measure test pressure and ambient temperature
HYDROlog 3000
• Test pressure to 1000bar• 1/4” BSP or Autoclave connection• Ambient temperature• Logging and real time
Activate subsea
AQUAswitch
• Single handed operation by a diver or ROV
• Positive detent in on/off position
Deploy with ease
• ROV grab bars with 20mm diameter
• 2 person lift• Compact size
(284 x 512 x 372mm)
Easy to connect
• Single point connection
• Instruments are set up and ready to be deployed
Built in redundancy
• Primary power source is a NiMH rechargeable battery
• The HYDROlog has a backup power supply to mitigate against any loss of data
Complete kit
• The HYDROskid is supplied with everything you need to get started, including an ROV side optical modem, ROV cable, charging cable, activator plug, USB cable and PC with pre-loaded software.
HYDROskid 3000 Hydrotest monitoring skid
The simplest way to monitor a hydrotest…
…measuring high accuracy test pressure and ambient temperature
8
The AQUAdisp™ is a revolutionary new subsea display, designed to offer a compact and low power alternative to other comparable instruments. The AQUAdisp can monitor up to 16 parameters and display them over 4 screens. Data can also be presented graphically (on 16 graphs), with up to 33hrs of data being shown on each compact plot. The low power technology means there is no need to turn it on or off. Three versions of the display are available, depending on whether it is to be used with Aquatec instrumentation or third party equipment. The AQUAdisp gives you the confidence in knowing that your monitoring instruments are working effectively.
• Displays up to 16 parameters over 4 screens and up to 16 graphs• Low power - no need to switch on and off• Rated to 4000m
The AQUAmodem Op2 is a subsea optical modem that provides a seamless interface between the user and any subsea instrumentation with RS232 serial interfaces, such as our HYDROlog hydrotest loggers. The connection is made typically via an ROV umbilical, providing simple use and deployment of the instrument.
The AQUAmodem Op2 features individual unit addressing and automatic optical or serial data wake-up, to conserve the life of the external battery pack and prolong the service of the device. The instrument permits short range interrogation, commanding, and data download for your subsea monitoring equipment, providing you with a cost-effective and efficient solution to solve your subsea communication needs.
AQUAdisp Subsea digital display
AQUAmodem Op2 Subsea optical modem
9
Hydrotest Rental Solutions
Aquatec’s hydrotest rental service offers an equipment and service package that includes a range of measurement and communication options, depending on the individual needs of the client. Our rental pool includes individual loggers, modems, displays and gauges, as well as systems set up to your specification and the new HYDROskid 3000 monitoring skid.
Whether you require a single component or a complete instrumentation system, Aquatec’s established rental services can provide you with an efficient and cost-effective solution to suit the needs of your project.
Why rent with Aquatec?• A proven range of instruments and services for oceanographic and offshore applications.• Competitively priced rental rates.• Technical support and training is available.• Short and long term rental rates.
Instruments available for rental
10
Rental Rewards ProgrammeJoin the rental rewards programme today to get the following benefits:• One frame agreement to cover rentals for the year, with terms and conditions agreed upfront, making
it easier for everyone to access the kit they need, quickly.• Preferential rental rates, saving you money on every deployment.• 10% discount on service and calibration of your own Aquatec instrumentation.• Initial training on the rental kit, giving you confidence and knowledge of the equipment.• Opportunity to trial new instrumentation before everyone else and be at the forefront of new
technology.
HYDROlog 3000 HYDROlog 2000
HYDROgauge AQUAdisp
HYDROskid 3000 AQUAmodem Op2
Aquatec Group Limited
Aquatec House, Stroudley Road, Basingstoke, RG24 8FW, UK
www.aquatecgroup.com
Tel: +44 (0) 1256 416010Fax: +44 (0) 1256 416019
