● Chennai ● Coimbatore ● Trichy ● Pan India

www.sanmacmachines.com

● Double Cylinder

● 94430 50170

● 98421 50170

● 94430 30170

Hydraulic Ironworkers

● "K' Series

● Single Cylinder

Page 1 of 6

Salient Features

Optional Accessories: o V' Notching set o Single 'V' Press brake

o Large 'V' Notching set o Multi 'V' Press brake

o Angle Bending o Pipe Notching Tools

o Channel Tools 3", 4" o Round, Square, Oblong Punches

Technical Specification

Punching

Punching Force Tons

mm

mm

Throat Depth mm

Max. Stroke Length mm

Angle Shearing

At 90* Shearing mm

At 45* Miter Shearing mm

Flat Shearing

mm

mm

Blade Length mm

Bar Shearing (Mild Deformation)

Round/ Sq. Bar Shear mm

Channel Shear* mm

Notching

Rect. Notching (WxDxT) mm

V' Notcher(SidexSidexT) mm

Special Tooling * (Optional)

Single V Press brake(WxT) mm

Multi V Press brake(WxT) mm

Electric Power HP 5.0 5.0 7.5Note: Specifications are subjected to changes without prior notice for the improvement of the product

● Based on Low Carbon Mild Steel 45Kg/mm2

Flat Bar Shear

(Width x Thickness)

350 x 8 300 x 12 350 x 15

180 x 12 200 x 18 210 x 20

360 310 360

Punching Capacity

(Diameter x Thickness)

Ø22 x 15 Ø20 x 18 Ø28 x 15

Ø40 x 8 Ø40 x 9 Ø40 x 11

175 180 220

160 x 8

76* 102*

76* 102*

Ø25 / 25 x 25 Ø32 / 30 x 30 Ø40 / 38 x 38

160 x 6 160 x 8

80 x 80 x 8 100 x 100 x 8 100 x 100 x 13

50 x 50 x 6 65 x 65 x 8 80 x 80 x 8

45 50 60

35 42 55

250 x 6

50.8 x 90 x 7 (Opt) 50.8 x 90 x 7 50.8 x 90 x 8

Particulars

90 x 90 x 8 90 x 90 x 8 90 x 90 x 10

IW 45M IW 50A IW 60H

Sunrise Hydraulic Ironworkers - Single Cylinder

IW 45M IW 50A IW 60H

o Four stations o Punching o Angle Shearing o Flat / Plate Shearing o Round/ Square bar Shear o Notching station can be fitted at Punching

o Five stations o Punching o Angle Shearing o Flat / Plate Shearing o Round/ Square bar Shear o Notching station o Vertical movement for Punching

o Five stations o Punching o Angle Shearing o Flat / Plate Shearing o Round/ Square bar Shear o Notching station

o 'Z' Shaped aperture for

Angle Station for doing internal & External Mitre shear on Angles

Page 2 of 6

Salient Features

Optional Accessories: o V' Notching set o Single 'V' Press brake

o Large 'V' Notching set o Multi 'V' Press brake

o Angle Bending o Pipe Notching Tools

o Channel Tools 3", 4", 5", 6", 8" o Round, Square, Oblong Punches

Punching

Tons 60 80 100 125 165

mm Ø22 x 20 Ø26 x 22 Ø28 x 26 Ø33 x 27 Ø37 x 32

mm Ø50 x 9 Ø50 x 12 Ø50 x 15 Ø45 Ø50 x 24

mm 310 / 510 310 / 510 310 / 510 310 / 510 510

mm 130 x130 x 12 150 x 150 x 12 152 x 152 x 15 152 x 152 x 18 205 x 205 x 20

mm 65 x 65 x 8 80 x 80 x 10 80 x 80 x 10 80 x 80 x 10 80 x 80 x 10

mm 350 x 15 460 x 15 610 x 16 610 x 18 760 x 20

mm 240 x 20 300 x 20 400 x 20 400 x 25 400 x 30

mm 360 465 620 620 770

mm Ø40 /38x38 Ø45/45x45 Ø45/45x45 Ø50/50x50 Ø60/60x60

mm 130* 150* 150* 150* 200*

mm 50.8 x 90 x 9 50.8 x 90 x 12 63.5 x 90 x 12 63.5 x 90 x 13 63.5 x 90 x 16

V' Notcher(SidexSidexT) mm mm 90 x 90 x 10 90 x 90 x 12 105 x 105 x 12 105 x 105 x 13 105 x 105 x 16

mm 250 x 15 250 x 15 250 x 20 250 x 20 250 x 20

mm 145 x 145 x 8* 145 x 145 x 10* 145 x 145 x 12* 145 x 145 x 13* 145 x 145 x 13*

HP 7.5 10.0 10.0 15.0 20.0

Note: Specifications are subjected to changes without prior notice. ● Based on Low Carbon Mild Steel 45Kg/mm2

Punching Capacity

(Diameter x Thickness)

Throat Depth (S / SD)

Angle Shearing

At 90* Shearing

At 45* Miter Shearing

Channel/ 'I' Beam Shear*

Notching

Rect. Notching (WxDxT)

Special Tooling * (Optional)

Single V Press brake(WxT)

Multi V Press brake(WxT)

Electric Power

Flat Shearing

Flat Bar Shear

(Width x Thickness)

Blade Length

Bar Shearing (Mild deformation)

Round / Sq. Bar Shear

IW 60S

IW 60SD

IW 80S

IW 80SD

IW 100S

IW 100SD

IW 125S

IW 125SDIW 165SDUnit

Punching Force

Sunrise Hydraulic Ironworkers - Double Cylinder

Additional Advantages

Technical Specification

Particulars

IW 60S ~ IW 165SD

o Five stations o Simultaneous operations

o Punching

o Angle Shearing o Flat / Plate Shearing o Round/ Square bar Shear o Notching

o Extra Heavy Duty o Low Pressure setting for Tool change for safety

o Long Punching Cylinder stroke

o Deep Throat Options -"S" Series: 310mm; 'SD" Series: 510mm o Large Punching Base with "T" Slot provides solid base for securing punching & custom designed tools

o Vertical movement for Punching

Page 3 of 6

Salient Features

Optional Accessories: o V' Notching set o Single 'V' Press brake

o Large 'V' Notching set o Multi 'V' Press brake

o Angle Bending o Pipe Notching Tools

o Channel Tools 3", 4", 5", 6" o Round, Square, Oblong Punches

with Shear Tools

PunchingPunching Force Tons

mmmm

Throat Depth mm

Angle Shearing At 90* Shearing mm

Flat Shearing Flat Bar Shear (W xT) mmBlade Length mm

Bar Shearing Round/Sq. Bar Shear mmChannel/ 'I' Beam Shear mm

NotchingRect. Notching (W x D x T) mmV' Notcher(Side x Side x T) mm

Special Tooling * (Optional)Single V Press brake(W x T) mmMulti V Press brake(W x T) mmAngle Bending mmPipe Notching mmElectric Power HP

Sunrise Hydraulic Ironworkers - "K" Series

5.0

Ø40 x 11 Ø50 x 12

165

75 x 75 x 6 100 x 100 x 8 130 x 130 x 12

300 x 10 300 x 15 406 x 17

65 x 65 x 8 65 x 65 x 8 100 x 100 x 7*

Ø60 Ø60 Ø100

90 x 90 x 8* 90 x 90 x 8* 105 x 105 x 12*

160 x 8* 160 x 8 250 x 12

Ø40 x 8

250 x 4* 250 x 6* 500 x 5*

76* 102* 152*

50.8 x 90 x 7 50.8 x 90 x 8 63.5 x 90 x 12

Ø30 / 25x25 Ø40/38x38 Ø45/45x45

310 360 410

200 410

7.5 10.0

Technical Specification

Note: Specifications are subjected to changes without prior notice. ● Based on Low Carbon Mild Steel 45Kg/mm2

Particulars IW 45K IW 60K IW 85KD

45 60 85

Punching Capacity

(Diameter x Thickness)

Ø22 x 15 Ø22 x 20 Ø27 x 2

IW 45K IW 60K IW 85KD

o Compact Unit - Low foot print o Five stations - Single Operator

o Punching

o Angle Shearing o Flat / Plate Shearing o Round & Square Bar Shear

o Notching o Manual Back gauge

o Compact Unit - Low foot print o Five stations - Double Operator o Punching o Angle Shearing o Flat / Plate Shearing o Round & Square Bar Shear o Notching o Hyd. Hold-down for shearing o Electric Back gauge

o Compact Unit - Low foot print o Five stations - Double Operator o Punching o Angle Shearing o Flat / Plate Shearing o Round & Square Bar Shear o Notching o Hyd. Hold-down for shearing o Electric Back gauge

o Mubea type tooling for punching

Page 4 of 6

Standard & Optional Accessories

Sunrise's Products Range

● Hydraulic Punching Machines ● Hydraulic Bending Machines - Manual / NC ● Full Range of CNC Products o Punching Machine with Semi Auto / Fully Auto Positioning Table o CNC Plate feeder - Punching & Cutting o CNC Angle Feeder PM 80T ANC o APS Auto Punch & Shear APS 30080M

Multi 'V' Press brake Channel Shearing

Punching Flat / Plate Shearing

Large 'V' Notching

Single 'V' Press brake

Rectangular Notching Angle Shearing Round / Square Bar Shearing

Pipe Notching Urethane Stripper

Page 5 of 6

Sunrise Fluid Power Inc., Taichung, Taiwan has been specializing in the manufacture of Hydraulic Ironworkers

Punching Machines, Bending Machines and other Punching & Cutting Automation Line Products for over

30 years. Sunrise's sales network covers almost 50 countries in Europe, Australia, North America, Russia,

South East Asia, the Middle East, India, Korea and others. Sunrise is passionate about excellence in everything

they do, making world-class, high value products for their Global customers. This global network reach

combined with the quality of the machines, make Sunrise on of the best choice when it comes to

metal forming. In this highly competitive international market, Sunrise's market share continues to grow.

Sunrise is now one of the leading brands in the fabrication industry world over.

All key components of the machines are made in-house at their most modern plant and automated

production lines. Sunrise uses the latest control system to ensure high efficient production and quality.

Sunrise is ISO-9001 certified by BVQI, and the products meet the CE safety requirements and regulations

Sunrise has over 400 machines working in India since 2008 and has been ably supported by Sanmac Machines.

Sales & Service

Continuous Improvement

Authorised Indian Distributors:

Dealer Network: Chennai, Bangalore, Kochi, Pune, Mumbai, Ahemdabad, Nagpur, New Delhi, Kolkata, Hyderabad

requirement and application. For more details, kindly get in touch with our Team.

Quality Control

Sunrise has a good quality control system and every machine coming out of the factory goes through

stricter quality control check. Every machine comes with a full Pre Delivery Inspection Report.

Sunrise is supported by a well structured Engineering team in India for Pre Sales & After Sales support.

Sunrise has network of Channel Partners who are trained in managing Pre / After Sales support.

Replacement spares required are stocked at Chennai and are available to customer at short notice.

Tools & Punches

Sunrise can off wide variety of Tools, Top Blades, Bottom Dies, Shearing & Notching Blades as per customer

Sunrise Fluid Power Inc., Taiwan

www.sunriseiw.com

ABOUT

Warranty

Every machine produced at Sunrise offer 24 months warranty against any manufacturing defects

Sunrise is constantly working on continuous improvement of the product matching international

Sales Office & Warehouse : T-348, SIDCO Womens Industrial Park, Thirumullaivoyal, Chennai 600 062. Tamilnadu

Ph: 98421 50170, 94430 50170; E Mail: admin@sanmacmahines.com; www.sanmacmachines.com                            

Page 6 of 6