1
1525 Main Street South • Sauk Centre, MN 56378 800-245-2809 • (320) 352-5230 Fax COMPETITIVE FEATURES FOR FELLING TRAILERSHYDRAULIC DETACHABLE GOOSENECK (HDG); • Multiple weight capacities, deck heights, and configurations • Non-ground bearing design • Self Locking neck attach system • Lower hydraulic pressure requirements (2450 psi on standard neck lengths) • 30-inch “True Scraper Neck” profile • 3-Interchangeable 5-position load height blocks (15 possible settings) • T-1 fabricated lift points • Lift cylinders protected from road debris and load contact • Interchangeable Front Flip Ramps/ Fixed Approach • Tapered Beam low profile deck approach • T-1 Flanges/ Hi-tensile Webs on all 4 Main Beams • All beams welded on both sides • Full 2” Oak decking • Removable Outriggers • Bolt on/ interchangeable trunnion approach bolsters • Low profile/ drop center trunnion crossmembers • Low profile trunnion bolsters • Swivel D-rings in trunnion bolsters • 25,000 lbs rated axles • Spring Parking Brake Chambers on all axles • Air ride suspension with dump valve and pressure gauge • Adjustable ride height control • Triple-tail lights • Flip Axle ready (110,000 lbs models and above) • 5-Year Frame Warranty • 3-Year Paint Warranty

Hyd Detach Competitive Features 12-31-09

Embed Size (px)

DESCRIPTION

C OMPETITIVE F EATURES F OR F ELLING T RAILERS ’ H YDRAULIC D ETACHABLE G OOSENECK (HDG); 1525 Main Street South • Sauk Centre, MN 56378 800-245-2809 • (320) 352-5230 Fax

Citation preview

Page 1: Hyd Detach Competitive Features 12-31-09

1525 Main Street South • Sauk Centre, MN 56378 800-245-2809 • (320) 352-5230 Fax

COMPETITIVE FEATURES FOR FELLING TRAILERS’ HYDRAULIC DETACHABLE GOOSENECK (HDG);

• Multiple weight capacities, deck heights, and configurations

• Non-ground bearing design

• Self Locking neck attach system

• Lower hydraulic pressure requirements (2450 psi on standard neck lengths)

• 30-inch “True Scraper Neck” profile

• 3-Interchangeable 5-position load height blocks (15 possible settings)

• T-1 fabricated lift points

• Lift cylinders protected from road debris and load contact

• Interchangeable Front Flip Ramps/ Fixed Approach

• Tapered Beam low profile deck approach

• T-1 Flanges/ Hi-tensile Webs on all 4 Main Beams

• All beams welded on both sides

• Full 2” Oak decking

• Removable Outriggers

• Bolt on/ interchangeable trunnion approach bolsters

• Low profile/ drop center trunnion crossmembers

• Low profile trunnion bolsters

• Swivel D-rings in trunnion bolsters

• 25,000 lbs rated axles

• Spring Parking Brake Chambers on all axles

• Air ride suspension with dump valve and pressure gauge

• Adjustable ride height control

• Triple-tail lights

• Flip Axle ready (110,000 lbs models and above)

• 5-Year Frame Warranty

• 3-Year Paint Warranty