15
C:\2_SOPs\ML17785(Engineering)\ml17785_01_nom_pr_lesy.doc | Revised: 08OCT15 | Page 1 of 15 HWH® SYSTEM IDENTIFICATION GUIDE LEVELING, STABILIZING & LANDING GEAR SYSTEMS (Filename: ML17785_01_NOM_PR_LESY.doc | Revised: 08OCT15) Printable File To find HWH® Replacement Parts, Operator Manuals, and Service Manuals it is often necessary to know what system you have. . This document will help identify which system you have, with the aid of pictures and descriptions of key components such as control panels, indicator light panels, control boxes, control modules, and sensing units. If you do NOT know the general control system gategory (below), click here to VIEW ALL LEVELING SYSTEMS. otherwise, please click on the general category below. 1XX Series | Lever-Controlled (Hydraulic) (1967 - Present) 2XX Series | Joystick-Controlled (Hydraulic) (19XX - Present) 3XX Series | Touch Panel-Controlled (Air or Hydraulic) (1995 - 2004) 4XX Series | Paddle Switch-Controlled (Hydraulic) (1985 - 1992) 5XX Series | Computer-Controlled (Touch Panel) (Air, Hydraulic, Air/Hydraulic) (1988 - 1993) 6XX Series | Computer-Controlled (Touch Panel) (Air, Hydraulic, Air/Hydraulic) (1988 - 2006) 7XX Series | Computer-Controlled (Touch Panel) (Air or Hydraulic) (YYYY - Present) 2000 Series | Computer-Controlled (Touch Panel) (Air, Hydraulic, Air/Hydraulic) (YYYY - Present) Precision Leveling | Computer-Controlled (Touch Panel) (Hydraulic) (YYYY - Present) Active Air Suspension Leveling | Computer-Controlled (LCD Panel) (Air or Air/Hydraulic) (YYYY - Present) Hand-Pump Leveling / Landing Gear (Hydraulic) (YYYY - Present)

HWH® SYSTEM IDENTIFICATION GUIDE system identification guide leveling, stabilizing & landing gear systems (filename: ... block frame and tires securely before

Embed Size (px)

Citation preview

Page 1: HWH® SYSTEM IDENTIFICATION GUIDE   system identification guide leveling, stabilizing & landing gear systems (filename: ... block frame and tires securely before

C:\2_SOPs\ML17785(Engineering)\ml17785_01_nom_pr_lesy.doc | Revised: 08OCT15 | Page 1 of 15

HWH® SYSTEM IDENTIFICATION GUIDE LEVELING, STABILIZING & LANDING GEAR SYSTEMS

(Filename: ML17785_01_NOM_PR_LESY.doc | Revised: 08OCT15)

Printable File

To find HWH® Replacement Parts, Operator Manuals, and Service Manuals

it is often necessary to know what system you have. .

This document will help identify which system you have, with the aid of pictures and descriptions of key components such as control panels, indicator light panels, control boxes, control modules, and sensing units.

If you do NOT know the general control system gategory (below), click here to VIEW ALL LEVELING SYSTEMS.

otherwise, please click on the general category below.

1XX Series | Lever-Controlled (Hydraulic) (1967 - Present)

2XX Series | Joystick-Controlled (Hydraulic) (19XX - Present)

3XX Series | Touch Panel-Controlled (Air or Hydraulic) (1995 - 2004)

4XX Series | Paddle Switch-Controlled (Hydraulic) (1985 - 1992)

5XX Series | Computer-Controlled (Touch Panel) (Air, Hydraulic, Air/Hydraulic) (1988 - 1993)

6XX Series | Computer-Controlled (Touch Panel) (Air, Hydraulic, Air/Hydraulic) (1988 - 2006)

7XX Series | Computer-Controlled (Touch Panel) (Air or Hydraulic) (YYYY - Present)

2000 Series | Computer-Controlled (Touch Panel) (Air, Hydraulic, Air/Hydraulic) (YYYY - Present)

Precision Leveling | Computer-Controlled (Touch Panel) (Hydraulic) (YYYY - Present)

Active Air Suspension Leveling | Computer-Controlled (LCD Panel) (Air or Air/Hydraulic) (YYYY - Present)

Hand-Pump Leveling / Landing Gear (Hydraulic) (YYYY - Present)

Page 2: HWH® SYSTEM IDENTIFICATION GUIDE   system identification guide leveling, stabilizing & landing gear systems (filename: ... block frame and tires securely before

C:\2_SOPs\ML17785(Engineering)\ml17785_01_nom_pr_lesy.doc | Revised: 08OCT15 | Page 2 of 15

1XX SERIES

100 SERIES PRODUCED: YYYY - YYYY

HWH® 100 Series, Lever-Controlled Hydraulic Leveling System (Four-Lever Control with Separate Indicator Light Panel with Rocker Switch or Toggle Switch)

PRODUCED: YYYY - YYYY HWH® 100 Series, Lever-Controlled Hydraulic Leveling System

(Three-Lever Control with Separate Indicator Light Panel with Rocker Switch or Toggle Switch) CONTROL PANEL INDICATOR LIGHT PANEL

LFEXTEND

BEFORE REMOVING TIRES OR CRAWLING UNDER VEHICLE.BEFORE USING. BLOCK FRAME AND TIRES SECURELY

CAUTION!

LR

HCORPORATIONSTOREHW

UNDERSTAND OPERATOR’S MANUAL

RF RR

R

UNDERSTAND OPERATOR’S MANUAL BEFORE USING.

LF

LF

REMOVING TIRES OR CRAWLING UNDER VEHICLE.BLOCK FRAME AND TIRES SECURELY BEFORE

CAUTION!

HYDRAULIC

5AMPFUSE

LR

LR

LEVEL

RF

WARNING

LEVEL

WHCORPORATIONH R

RF

RR

OFF

RR

LEVELING

UNDERSTAND OPERATOR’S MANUAL BEFORE USING.

LF

LF

REMOVING TIRES OR CRAWLING UNDER VEHICLE.BLOCK FRAME AND TIRES SECURELY BEFORE

CAUTION!

HYDRAULIC

5AMPFUSE

LR

LR

LEVEL

DUMPWARNING

WHCORPORATIONH

RF

RF

R

OFF

RR

RR

LEVELING

LEVEL

WARNING LIGHT SYSTEM

LEVELEZE LIGHT SYSTEM

CORPORATIONW

OFF

H H R

LR

ON

LF

RR

RF

OFFLR

ON

FUSE

WARNING LIGHT SYSTEM

HCORPORATION

HW R

s

RR

u

s

eef u

f

ue

f

s

LEVELEZE LIGHT SYSTEM

LF RF

Without HWH® Suspension Air

Dump

With HWH® Suspension Air

Dump With Rocker Switch

With Toggle Switch (OBSOLETE)

• 100 Series uses separate indicator light panel >>> • Single-slot in the control unit bezel plate for each

lever. • Single lever control for

each jack. • Indicator lights are on a plate mounted SEPARATE from the control unit.

• Used with straight-acting or kick-down jacks.

110 SERIES PRODUCED: YYYY - YYYY

HWH® 110 Series, Lever-Controlled Hydraulic Leveling System (Four-Lever Control with Integrated Indicator Light Panel with Rocker Switch or Toggle Switch)

(With or Without HWH® Suspension Air Dump) PRODUCED: YYYY - YYYY

HWH® 110 Series, Lever-Controlled Hydraulic Leveling System (Three-Lever Control with Integrated Indicator Light Panel with Rocker Switch or Toggle Switch)

(With or Without HWH® Suspension Air Dump) PRODUCED: YYYY - YYYY

HWH® 110 Series, Lever-Controlled Hydraulic Front Jack Equalization System (Lever Control with Integrated Indicator Light Panel with Rocker Switch or Toggle Switch)

CONTROL PANEL

CORPORATIONH

UNDERSTAND OPERATOR’S MANUAL BEFORE

TIRES OR CRAWLING UNDER VEHICLE.USING. BLOCK FRAME AND TIRES BEFORE REMOVING

HWH HYDRAULIC LEVELING

CAUTION!

STORE

EXTEND

WARNING

LEVELING

LR LF

LR LF

OFF

5 AMPFUSE

LEVEL

RR

RR

WH

RF

RF

R

CORPORATIONH

UNDERSTAND OPERATOR’S MANUAL BEFORE

TIRES OR CRAWLING UNDER VEHICLE.USING. BLOCK FRAME AND TIRES BEFORE REMOVING

HWH HYDRAULIC LEVELING

CAUTION!

STORE

EXTEND

WARNING LR LF

LEVELING LR LF

LEVEL

5 AMPFUSE

OFF

DUMP

RR

HW

RF

R

RRRF

Without HWH® Suspension Air Dump With HWH® Suspension Air Dump

• Single lever control for each jack. • Single slot in the control unit bezel plate for each lever.

• Special control unit & light plate for fifth wheels and travel trailers. • Used with kick-down or straight-acting jacks.

• Indicator lights are integrated into the slotted bezel plate covering the control unit.

Page 3: HWH® SYSTEM IDENTIFICATION GUIDE   system identification guide leveling, stabilizing & landing gear systems (filename: ... block frame and tires securely before

C:\2_SOPs\ML17785(Engineering)\ml17785_01_nom_pr_lesy.doc | Revised: 08OCT15 | Page 3 of 15

2XX SERIES

200 SERIES PRODUCED: YYYY - YYYY

HWH® 200 Series, Joystick-Controlled Hydraulic Leveling System (with BI-AXIS® Control and Separate Indicator Light Panel)

(With or Without HWH® Suspension Air Dump) CONTROL PANEL INDICATOR LIGHT PANEL

CAUTION!

SECURELY BEFORE REMOVING TIRES OR CRAWLING UNDER VEHICLE.UNDERSTAND OPERATOR’S MANUAL BEFORE USING. BLOCK FRAME AND TIRES

HWH HYDRAULIC LEVELING

OFF

ON

BRAKEPARK/NOT IN

5 AMP

FUSE

FUSE

CAUTION!

SECURELY BEFORE REMOVING TIRES OR CRAWLING UNDER VEHICLE.UNDERSTAND OPERATOR’S MANUAL BEFORE USING. BLOCK FRAME AND TIRES

HWH HYDRAULIC LEVELING

OFF

BRAKEPARK/NOT IN

ON

5 AMP

FUSE

FUSE

Without HWH® Suspension Air Dump With HWH® Suspension Air Dump • 200 Series uses separate

indicator light panel >>> • Single joystick control for all four

jacks. • One front store lever and one

rear store lever. • Control unit bezel plate has a

cross slot.

• Indicator lights are on a plate mounted SEPARATE from the control unit.

• Used with kick-down or straight-acting jacks.

210/225 SERIES PRODUCED: YYYY - YYYY

HWH® 210 Series, Joystick-Controlled Hydraulic Leveling System (with BI-AXIS® Control and Integrated Indicator Light Panel)

(With or Without HWH® Suspension Air Dump) PRODUCED: YYYY - YYYY

HWH® 225 Series, Joystick-Controlled Hydraulic Leveling System (with BI-AXIS® Control and Integrated Indicator Light Panel)

(With or Without HWH® Suspension Air Dump) (With or Without Control Console)

CONTROL PANEL

• Single joystick control for all four jacks. • One front store lever and one rear store lever. • Control unit bezel plate has a cross slot. • Indicator lights are integrated into control unit bezel plate. • 210 Series has mercury level sensor. • 225 Series has electronic level sensor. • Used with kick-down or straight-acting jacks.

Page 4: HWH® SYSTEM IDENTIFICATION GUIDE   system identification guide leveling, stabilizing & landing gear systems (filename: ... block frame and tires securely before

C:\2_SOPs\ML17785(Engineering)\ml17785_01_nom_pr_lesy.doc | Revised: 08OCT15 | Page 4 of 15

3XX SERIES

300 SERIES PRODUCED: YYYY - YYYY

HWH® 300 Series, Touch Panel-Controlled Air Leveling System (with MANUAL BI-AXIS® Control)

305 SERIES

PRODUCED: YYYY - YYYY HWH® 305 Series, Touch Panel-Controlled Hydraulic Leveling System

(with MANUAL BI-AXIS® Control)

310 SERIES - ROCKER-SWITCH PRODUCED: YYYY - YYYY

HWH® 310 Series, Rocker Switch-Controlled Hydraulic Leveling System (with Three-Point Rocker Switch Control)

(Designed for Safari® Motorhomes Only) (Motorized)

310 SERIES - TOUCH PANEL PRODUCED 1995 - 2003

HWH® 310 Series, Touch Panel-Controlled Hydraulic Leveling System (with MANUAL BI-AXIS® Control)

(Designed for Motorized & Non-Motorized Vehicles) PRODUCED: YYYY - YYYY

HWH® 310 Series, Touch Panel-Controlled Hydraulic Leveling System (with MANUAL BI-AXIS® Control)

(With Hand-Held Pendant Type Controller) (Designed for Non-Motorized Vehicles) (Straight-Acting Jacks Only)

CONTROL PANEL CONTROL BOX

CAUTION!

HWH HYDRAULIC LEVELING

UNDERSTAND OPERATOR’S MANUAL BEFORE USING. BLOCK FRAME AND TIRESSECURELY BEFORE REMOVING TIRES OR CRAWLING UNDER VEHICLE.

STORE

OFF

ON

NOT IN

BRAKEPARK/

OFF

BRAKE

NOT INPARK/

STORE

ON

HWH HYDRAULIC LEVELING

CAUTION!UNDERSTAND OPERATOR’S MANUAL BEFORE USING. BLOCK FRAME AND TIRES

SECURELY BEFORE REMOVING TIRES OR CRAWLING UNDER VEHICLE.

10 A

MP

5 A

MP

5 AMP

10 A

MP

10 A

MP 10

AM

P

5 A

MP

5 AMP

7-1/2"

2-3/4"

4-1/2"

• Without HWH® Suspension Air Dump • With HWH® Suspension Pilot Air Dump

• Touch Panel • Heading: “HWH HYDRAULIC LEVELING”

• Touch panel with a rabbit at the bottom is for vehicles with "Pilot Air Dump". • Jacks will retract automatically with "STORE" button.

• Used with kick-down or straight-acting jacks. (Pendant SA jacks only.)

• Control Box is 2-3/4” x 4-1/4” x 7-1/2”

Page 5: HWH® SYSTEM IDENTIFICATION GUIDE   system identification guide leveling, stabilizing & landing gear systems (filename: ... block frame and tires securely before

C:\2_SOPs\ML17785(Engineering)\ml17785_01_nom_pr_lesy.doc | Revised: 08OCT15 | Page 5 of 15

325 SERIES PRODUCED: 2003 - PRESENT

HWH® 325 Series, Touch Panel-Controlled Hydraulic Leveling System (with MANUAL BI-AXIS® Control)

(Long PC Board Series) PRODUCED: 2003 - 2004

HWH® 325 Series, Touch Panel-Controlled Hydraulic Leveling System (with MANUAL BI-AXIS® Control)

(Short PC Board Series) PRODUCED: YYYY - YYYY

HWH® 325 Series, Touch Panel-Controlled Hydraulic Leveling System (with MANUAL BI-AXIS® Control)

(with Hand-Held Pendant Type Controller) (Designed for Non-Motorized Vehicles)

"SHORT" PC BOARD SERIES | PRODUCED: 2003 - 2004 CONTROL PANEL

FRONT BACK CONTROL BOX

SECURELY BEFORE REMOVING TIRES OR CRAWLING UNDER VEHICLE.

UNDERSTAND OPERATOR’S MANUAL BEFORE USING. BLOCK FRAME AND TIRESCAUTION!

HWH HYDRAULIC LEVELING

STORE

OFF

ON

FUSE3AMP

REVERSE

ELECTRICAL

LEVEL SENSOR

CONTROL BOXMOUNTED

SHORTBOARD

• Touch Panel

• Heading: "HWH HYDRAULIC LEVELING"

• With or Without HWH® Suspension Air Dump

• Touch panel does NOT have ”NOT IN PARK/BRAKE”

indicator light.

• Touch panel has four connectors on back. • Touch panel has one three-amp fuse on the back.

• Short PC Board • Control box has an 8.5" x 11" clear

plastic cover. • Electronic (rectangular) level sensor

is mounted inside control box.

"LONG" PC BOARD SERIES | PRODUCED: 2003 - Present CONTROL PANEL

FRONT BACK CONTROL BOX

SECURELY BEFORE REMOVING TIRES OR CRAWLING UNDER VEHICLE.

UNDERSTAND OPERATOR’S MANUAL BEFORE USING. BLOCK FRAME AND TIRES

STORE

CAUTION!OFF

DUMP

HWH HYDRAULIC LEVELING

ON

PARK/NOT IN

BRAKE

UNDERSTAND OPERATOR’S MANUAL BEFORE USING. BLOCK FRAME AND TIRES

SECURELY BEFORE REMOVING TIRES OR CRAWLING UNDER VEHICLE.

CAUTION!OFF

STORE

HWH HYDRAULIC LEVELING

ON

NOT INPARK/BRAKE SINGLE

CONNECTOR

REVERSE

CONTROL BOXMOUNTED

LONGBOARD

LEVEL SENSORELECTRICAL

With

HWH® Suspension Air Dump Without HWH®

Suspension Air Dump • Touch Panel

• Heading: "HWH HYDRAULIC LEVELING" • "NOT IN PARK/BRAKE" indicator light.

• Touch panel has one five-pin connector on

back.

• Long PC Board • Electronic level sensor is mounted

inside control box. • Control box has an 8.5" x 11" clear

plastic cover.

Page 6: HWH® SYSTEM IDENTIFICATION GUIDE   system identification guide leveling, stabilizing & landing gear systems (filename: ... block frame and tires securely before

C:\2_SOPs\ML17785(Engineering)\ml17785_01_nom_pr_lesy.doc | Revised: 08OCT15 | Page 6 of 15

4XX SERIES

400 SERIES PRODUCED: 1985 - 1992

HWH® 400 Series, Computer-Controlled Hydraulic Leveling System (with NON-BIAXIS® Paddle Switch Control) or (with BI-AXIS® Paddle Switch Control)

CONTROL PANELS

ON FOR MORE THAN TWO OUT OF EVERY FOUR MINUTES.TO PREVENT DAMAGE FROM OVERHEATING DO NOT HOLD SWITCH

HOLD

EXTEND

RETRACT

EXTEND

HOLD

RETRACT

CHANGING TIRES OR WORKING UNDER VEHICLECAUTION!

LEFT REAR

EXTEND

RETRACT

HOLD

BLOCK FRAME SECURELY BEFORE

LEFT FRONT RIGHT FRONT RIGHT REAR

MANUAL OPERATION

EMERGENCY

ON

OFF

MASTERHORIZONTALLEVELING

RETRACTAUTOMATIC VERTICAL

AUTOMATIC

5 AMP

WCORPORATIONH H

CORPORATIONH

REAR

RETRACTAUTOMATIC

FRONT

WORKING UNDER VEHICLE. MANUAL USE LIMITED TO 4 MIN.BLOCK FRAME SECURELY BEFORE CHANGING TIRE OR

EXTEND

HOLD

EMERGENCY

RETRACT

CAUTION!

LEFT SIDE

OFF

HOLD

EXTEND

HOLD

EXTEND

RIGHT SIDE

VERTICAL

RETRACT RETRACT

HW

5 AMP

MANUAL OPERATION

LEVELINGAUTOMATICMASTER

ON HORIZONTAL

LEFT REAR LEFT FRONT RIGHT FRONT RIGHT REAR

WITHOUT COOL DOWN.

SWITCHES & LEVELEZE INDICATORS

JACK DOWN INDICATORS

NON BI-AXIS®

(Standard) BI-AXIS®

(A few manufactured for Holiday Rambler®)

• Control panel equipped with paddle switches. • Air suspension dump optional.

• Some control panels may be labeled "A&E". • Hydraulic pump and manifold separate.

• Used with kick-down or straight-acting jacks. • 400 Series control panel looks like no other HWH® system control panel.

• Available in BI-AXIS® or NON BI-AXIS®

Page 7: HWH® SYSTEM IDENTIFICATION GUIDE   system identification guide leveling, stabilizing & landing gear systems (filename: ... block frame and tires securely before

C:\2_SOPs\ML17785(Engineering)\ml17785_01_nom_pr_lesy.doc | Revised: 08OCT15 | Page 7 of 15

5XX SERIES

500 SERIES PRODUCED: 1988 - 1993

HWH® 500 Series, Computer-Controlled Air Leveling System (with Four-Point BI-AXIS® Touch Panel Control)

PRODUCED: YYYY - YYYY HWH® 500 Series, Computer-Controlled, Air Leveling System

(with Three-Point Touch Panel Control) PRODUCED: YYYY - YYYY

HWH® 500 Series, Computer-Controlled Air/Hydraulic Leveling System (with BI-AXIS® Touch Panel Control)

PRODUCED: YYYY - YYYY HWH® 500 Series, Computer-Controlled Hydraulic Leveling System

(with BI-AXIS® Touch Panel Control) CONTROL PANEL CONTROL BOX

FRONT BACK

RAISEOFF

TRAVEL

AIR

DUMPSTORE

HYD

LEVEL

PARK NOT IN

EXCESSSLOPE

HWH COMPUTERIZED LEVELING

SECURELY BEFORE REMOVING TIRES OR CRAWLING UNDER VEHICLE.UNDERSTAND OPERATOR’S MANUAL BEFORE USING. BLOCK FRAME AND TIRES

CAUTION!

REVERSE

40 PIN CONNECTOR

14-1/2"

9"

3-1/2"

• Touch Panel

• Heading: “HWH COMPUTERIZED LEVELING”.

• Touch panel has a forty-pin connector on back.

• Glass or blade style fuses may be found in a 500 Series control box.

• Control box is 3-1/2” x 9” x 14-1/2”. • Used for Air Leveling or combination Air/Hydraulic Leveling.

• Connecting cable between the control box and touch panel is a 2” wide, flat, forty-pin ribbon cable.

510 SERIES (510M SERIES - AP8073) PRODUCED: 1990-1/2 - 1993

HWH® 510 Series, Computer-Controlled Hydraulic Leveling System (with BI-AXIS® Touch Panel Control)

CONTROL PANEL FRONT BACK CONTROL BOX

SECURELY BEFORE REMOVING TIRES OR CRAWLING UNDER VEHICLE.UNDERSTAND OPERATOR’S MANUAL BEFORE USING. BLOCK FRAME AND TIRES

CAUTION!

STORE

TRAVEL

NOT INPARK

HWH COMPUTERIZED LEVELING

EXCESSSLOPE

OFF

ONAUTO

BRAKE

REVERSE

8 WIRE CONNECTOR40 PIN CONNECTOR

REVERSE

OR

7.5 AMP

7.5 AMP 5 AMP

10 A

MP

10 A

MP

10 A

MP

10 A

MP

5 A

MP

5 A

MP

4-1/2"

2-3/4"

6-1/2"

• Touch Panel

• Heading: “HWH COMPUTERIZED

LEVELING”

Touch panel has either a forty-pin connector on back

(OR) an eight-wire connector on back. Control box is 2-3/4” x 4-1/4” x 6-1/2”

• Connecting cable between the control box and touch panel was a 2” wide, flat, 40 pin ribbon cable (early models) or a 3/8” wide, flat, eight-wire ribbon cable.

• The hydraulic pump and manifold are separate units connected with a high pressure hose and return line.

Page 8: HWH® SYSTEM IDENTIFICATION GUIDE   system identification guide leveling, stabilizing & landing gear systems (filename: ... block frame and tires securely before

C:\2_SOPs\ML17785(Engineering)\ml17785_01_nom_pr_lesy.doc | Revised: 08OCT15 | Page 8 of 15

6XX SERIES

600 SERIES PRODUCED: 1988-1993

HWH® 600 Series, Computer-Controlled Air Leveling System (with BI-AXIS® Touch Panel Control)

PRODUCED: YYYY - YYYY HWH® 600 Series, Computer-Controlled Air/Hydraulic Leveling System

(with BI-AXIS® Touch Panel Control) PRODUCED: YYYY - YYYY

HWH® 600 Series, Computer-Controlled Hydraulic Leveling System (with BI-AXIS® Touch Panel Control)

CONTROL PANEL FRONT BACK CONTROL BOX

UNDERSTAND OPERATOR’S MANUAL BEFORE USING. BLOCK FRAME AND TIRESSECURELY BEFORE REMOVING TIRES OR CRAWLING UNDER VEHICLE.

HWH COMPUTERIZED LEVELING

LEVEL

STORE

OFF

HYD

CAUTION!

SLOPEEXCESS

NOT INPARK

TRAVEL

RAISE

DUMP

AIR

8 WIRE CONNECTOR

REVERSE

3-1/2"

9"

14-1/2"

AUTOMOTIVE TYPE BLADE FUSES

15 15 15 1515 15 5 5 5 5 5 5 5 5 5 5 15 15 15

• Touch Panel

• Heading: “HWH COMPUTERIZED LEVELING”.

• STORE function. • Air dump optional.

• Air systems have DUMP & RAISE feature.

Touch panel has an eight-wire connector on back.

• Only blade style fuses will be found in a 600 Series control box.

• Control box is 3-1/2” x 9” x 14-1/2”.

• Connecting cable between the control box and the touch panel is 3/8” wide, flat, eight-wire ribbon cable. • Used for Air Leveling, Hydraulic Leveling, or combination Air/Hydraulic leveling.

Page 9: HWH® SYSTEM IDENTIFICATION GUIDE   system identification guide leveling, stabilizing & landing gear systems (filename: ... block frame and tires securely before

C:\2_SOPs\ML17785(Engineering)\ml17785_01_nom_pr_lesy.doc | Revised: 08OCT15 | Page 9 of 15

610 SERIES PRODUCED: 1992 - 1993

HWH® 610 Series, Computer-Controlled Hydraulic Leveling System (with BI-AXIS® Touch Panel Control)

(NON-Central Ground) PRODUCED: 1993 - 2003

HWH® 610 Series, Computer-Controlled Hydraulic Leveling System (with BI-AXIS® Touch Panel Control)

(Central Ground) 610 SERIES - NON-CENTRAL GROUND

PRODUCED: 1992-1993 CONTROL PANEL

FRONT BACK CONTROL BOX

HWH COMPUTERIZED LEVELING

SECURELY BEFORE REMOVING TIRES OR CRAWLING UNDER VEHICLE.UNDERSTAND OPERATOR’S MANUAL BEFORE USING. BLOCK FRAME AND TIRES

TRAVEL

CAUTION!

NOT INPARK BRAKE

OFF

STORE

EXCESSSLOPE

AUTOON

8 WIRE CONNECTOR

REVERSE

10 A

MP

7.5 AMP

10 A

MP

10 A

MP

10 A

MP

7.5 AMP

5 AMP

5 A

MP

5 A

MP 2-3/4"

4-1/2"

6-1/2"

• Touch Panel

• Heading: “HWH COMPUTERIZED LEVELING”

• STORE function.

Touch panel has an eight-wire connector on back. Control Box is 2-3/4” x 4-1/2” x 6-1/2”.

• Connecting cable between the control box and touch panel is a 3/8” wide, flat, eight-wire ribbon cable. • The warning switch harness at each jack has one plug only. It may be a one-wire or two-wire connector.

• The pump and manifold are one assembly. 610 SERIES - CENTRAL GROUND

PRODUCED: 1993 - 2003 CONTROL PANEL

FRONT BACK CONTROL BOX

UNDERSTAND OPERATOR’S MANUAL BEFORE USING. BLOCK FRAME AND TIRESSECURELY BEFORE REMOVING TIRES OR CRAWLING UNDER VEHICLE.

HWH COMPUTERIZED LEVELING

NOT INPARK BRAKE

TRAVEL

CAUTION!

DUMP

OFF

STORE

EXCESSSLOPELEVELHYD

11 PIN CONNECTOR

REVERSE

7.5 AMP

10 A

MP

10 A

MP

10 A

MP 10

AM

P

5 A

MP

5 AMP

4-1/2"

7-1/2"

2-3/4"

• Touch Panel

• Heading: “HWH COMPUTERIZED LEVELING”.

Touch panel has one eleven-pin connector on back.

• Control Box is 2-3/4” x 4-1/2” x 7-1/2”. • Central ground.

• Connecting cable between the control box and touch panel is an eleven-pin cable assembly. • The warning switch harness at each jack has two plugs, one single-wire and one two-wire connector.

• The pump and manifold are one assembly.

Page 10: HWH® SYSTEM IDENTIFICATION GUIDE   system identification guide leveling, stabilizing & landing gear systems (filename: ... block frame and tires securely before

C:\2_SOPs\ML17785(Engineering)\ml17785_01_nom_pr_lesy.doc | Revised: 08OCT15 | Page 10 of 15

625 & 625S SERIES PRODUCED: 2003 - PRESENT

HWH® 625 Series, Computer-Controlled Hydraulic Leveling System (with BI-AXIS® Touch Panel Control)

(Programmable Sensing Unit) PRODUCED: 2006

HWH® 625S Series, Leveleze® Single-Step Computer-Controlled Hydraulic Leveling System (with BI-AXIS® Touch Panel Control)

(Programmable Sensing Unit) 625 SERIES

PRODUCED: 2003 - PRESENT CONTROL PANEL

FRONT BACK CONTROL BOX

UNDERSTAND OPERATOR’S MANUAL BEFORE USING. BLOCK FRAME AND TIRESSECURELY BEFORE REMOVING TIRES OR CRAWLING UNDER VEHICLE.

HWH COMPUTERIZED LEVELING

OFF

CAUTION!

EXCESSSLOPE

PARK NOT IN

TRAVEL

BRAKE

STORE DUMP

HYD LEVEL

MODE

5 PIN CONNECTOR

REVERSE

ELECTRICAL

LEVEL SENSOR

MOUNTEDCONTROL BOX

• Touch Panel

• Heading: “HWH COMPUTERIZED LEVELING”

• Lower middle green indicator light is labeled “TRAVEL MODE” not “TRAVEL”.

Five-pin connector on back.

• Control box has an 8” x 11" clear plastic cover.

• Control box is mounted to the pump tray.

• Electronic programmable level sensor is mounted inside control box.

• The jack warning switch plugs are grey. • Used for hydraulic leveling only.

625S (SINGLE STEP) SERIES PRODUCED: 2006

CONTROL PANEL FRONT BACK CONTROL BOX

UNDERSTAND OPERATOR’S MANUAL BEFORE USING. BLOCK FRAME AND TIRES

CAUTION!SECURELY BEFORE REMOVING TIRES OR CRAWLING UNDER VEHICLE.

EMERGENCYSTOP

MODETRAVEL

HWH COMPUTERIZED LEVELING

AUTOSTORE DUMP

MANUAL

LEVELAUTO

R

BRAKEPARK/NOT IN

SLOPEEXCESS

5 PIN CONNECTOR

REVERSE

6 PIN CONNECTORMAY NOT BE PRESENT

CONTROL BOX

LEVEL SENSORELECTRICAL

MOUNTED

• Touch Panel

• Heading: “HWH COMPUTERIZED LEVELING”

• Touch Panel has an outline around the manual UP and DOWN arrows.

• Lower middle green indicator light is labeled “TRAVEL MODE” not “TRAVEL”.

• Touch panel has a five-pin connector on back.

• Six-pin connector may not be present on back of touch panel.

• Control box has an 8” x 11’ clear plastic cover.

• Control box is mounted to the pump tray.

• Electronic programmable level sensor is mounted inside control box.

• Jack warning switch plugs are grey. • Used for hydraulic leveling only.

Page 11: HWH® SYSTEM IDENTIFICATION GUIDE   system identification guide leveling, stabilizing & landing gear systems (filename: ... block frame and tires securely before

C:\2_SOPs\ML17785(Engineering)\ml17785_01_nom_pr_lesy.doc | Revised: 08OCT15 | Page 11 of 15

680 SERIES PRODUCED: 1997 - 2002

HWH® 680 Series, Computer-Controlled Hydraulic Leveling System (with BI-AXIS® Touch Panel Control)

PRODUCED: YYYY - YYYY HWH® 680 Series, Computer-Controlled Air Leveling System

(with BI-AXIS® Touch Panel Control) PRODUCED: YYYY - YYYY

HWH® 680 Series, Computer-Controlled Air/Hydraulic Leveling System (with BI-AXIS® Touch Panel Control)

CONTROL PANEL FRONT BACK CONTROL BOX

UNDERSTAND OPERATOR’S MANUAL BEFORE USING. BLOCK FRAME AND TIRES

LEVEL

DUMP

OFF

SECURELY BEFORE REMOVING TIRES OR CRAWLING UNDER VEHICLE.

CAUTION!RAISE

TRAVEL

HWH COMPUTERIZED LEVELING

AIR

R

NOT IN

BRAKEPARK/

EXCESSSLOPE

REVERSE

8 WIRE CONNECTOR

19"

14-1/2"

• Touch Panel

• Heading: “HWH COMPUTERIZED LEVELING”

Touch panel has an eight-wire connector on back.

• Control box is 3-1/2” x 14-1/2” x 19”. • Control box is 3-1/2” deep.

• Used for Air Leveling or combination Air/Hydraulic Leveling • Connecting cable between the control box and touch panel is a 2/8” wide, flat, eight-wire ribbon cable.

Page 12: HWH® SYSTEM IDENTIFICATION GUIDE   system identification guide leveling, stabilizing & landing gear systems (filename: ... block frame and tires securely before

C:\2_SOPs\ML17785(Engineering)\ml17785_01_nom_pr_lesy.doc | Revised: 08OCT15 | Page 12 of 15

7XX SERIES

700 SERIES PRODUCED: YYYY - PRESENT

HWH® 700S Series, Leveleze® Single-Step Computer-Controlled Air Leveling System (with BI-AXIS® Touch Panel Control)

CONTROL PANEL FRONT BACK

SENSING UNIT & I/O CONTROL MODULE (NO CONTROL BOX)

SLOPEEXCESS

MODETRAVEL

HWH COMPUTERIZED LEVELING

NOT INPARK/BRAKE

WARNING!

SECURELY BEFORE REMOVING TIRES OR CRAWLING UNDER VEHICLE.

UNDERSTAND OPERATOR’S MANUAL BEFORE USING. BLOCK FRAME AND TIRES

MODETRAVEL

CANCEL

RAISE

DUMP

LEVEL AIR

REVERSE

5 PIN CONNECTOR

Potted Electronic Sensing Unit (above)

Potted Multiplexed Input Output Module

("MIOM") (above) • Touch Panel

• Heading: “HWH COMPUTERIZED LEVELING”

• Lower middle green indicator light is labeled “TRAVEL MODE” not

“TRAVEL”.

• Touch panel has a five-pin connector on back. • Touch panel has a

_____________ on back.

• MIOM located at each air manifold. • MIOM replaces typical control box.

• Potted electronic (rectangular) sensing unit is

remote-mounted with three screws and three springs.

• Use for Air Leveling

725 SERIES PRODUCED: YYYY - PRESENT

HWH® 725 Series, Computer-Controlled Hydraulic Leveling System (with BI-AXIS® Touch Panel Control) (Kick-Down Jacks)

PRODUCED: YYYY - YYYY HWH® 725S Series, Leveleze® Single-Step Computer-Controlled Hydraulic Leveling System

(with BI-AXIS® Touch Panel Control) (Straight-Acting Jacks) PRODUCED: YYYY - YYYY

HWH® 725S Series, Leveleze® Single-Step Computer-Controlled Hydraulic Leveling and Landing Gear System (with BI-AXIS® Touch Panel Control) (Straight-Acting Jacks) CONTROL PANEL

FRONT BACK

SENSING UNIT & I/O CONTROL MODULE

(NO CONTROL BOX)

WARNING!

HWH COMPUTERIZED LEVELING

SECURELY BEFORE REMOVING TIRES OR CRAWLING UNDER VEHICLE.UNDERSTAND OPERATOR’S MANUAL BEFORE USING. BLOCK FRAME AND TIRES

CANCEL

TRAVELMODE

AUTO

AUTOSTORE

LEVEL

R

PARK/NOT IN

BRAKE

SLOPEEXCESS

5 PIN CONNECTOR

REVERSE

Potted Electronic Sensing Unit (above)

Potted Multiplexed Input Output Module ("MIOM") (above)

• Touch Panel • Heading: “HWH COMPUTERIZED

LEVELING” • Touch panel "manual" operations enclosed

with white outline. • Lower middle green indicator light is

labeled “TRAVEL MODE” not “TRAVEL”.

• Touch panel has a five-pin connector on back.

• Touch panel has a ________ on back.

• MIOM mounted on pump. • MIOM replaces typical control box.

• Potted electronic (rectangular) sensing unit is remote-mounted with three screws

and three springs.

• All 725 Series are Single-Step, unless they have kick-down jacks. • Can have Auxiliary Hand-Pump Control.

• Use for Hydraulic leveling.

Page 13: HWH® SYSTEM IDENTIFICATION GUIDE   system identification guide leveling, stabilizing & landing gear systems (filename: ... block frame and tires securely before

C:\2_SOPs\ML17785(Engineering)\ml17785_01_nom_pr_lesy.doc | Revised: 08OCT15 | Page 13 of 15

2000 SERIES

2000 SERIES (PRODUCED: 2001 - PRESENT) PRODUCED: YYYY - YYYY

HWH® 2000 Series, Computer-Controlled Hydraulic Leveling and/or Landing Gear System (with BI-AXIS® Touch Panel Control) (for Non-Motorized Towable Vehicles)

PRODUCED: YYYY - YYYY HWH® 2000 Series, Computer-Controlled Hydraulic Leveling System

(with BI-AXIS® Touch Panel Control) PRODUCED: YYYY - YYYY

HWH® 2000 Series, Computer-Controlled Air Leveling System (with BI-AXIS® Touch Panel Control)

PRODUCED: YYYY - YYYY HWH® 2000 Series, Computer-Controlled Air/Hydraulic Leveling System

(with BI-AXIS® Touch Panel Control) PRODUCED: YYYY - YYYY

HWH® 2000S Series, Leveleze® Single-Step Computer-Controlled Air Leveling System (with BI-AXIS® Touch Panel Control)

PRODUCED: YYYY - YYYY HWH® 2000S Series, Leveleze® Single-Step Computer-Controlled Hydraulic Leveling System

(with BI-AXIS® Touch Panel Control) PRODUCED: YYYY - YYYY

HWH® 2000 Series, Computer-Controlled Precision Hydraulic Leveling System (with BI-AXIS® Touch Panel Control, for Motorized Vehicles)

PRODUCED: YYYY - YYYY HWH® 2000 Series, Computer-Controlled Precision Hydraulic Leveling System

(with BI-AXIS® Touch Panel Control, for Non-Motorized Vehicles) CONTROL PANEL

FRONT BACK SENSING UNIT & CONTROL BOX

UNDERSTAND OPERATOR’S MANUAL BEFORE USING. BLOCK FRAME AND TIRES

SECURELY BEFORE REMOVING TIRES OR CRAWLING UNDER VEHICLE.

CAUTION!

BRAKEPARK/NOT IN

HWH COMPUTERIZED LEVELING

TRAVELMODE

EXCESSSLOPE

STOP

TRAVELMODE

EMERGENCY

RAISE

DUMP

LEVEL AIR

5 PIN CONNECTOR

REVERSE

MOUNTED INSIDECONTROL BOX

ELECTRICAL LEVEL SENSOR

• Touch Panel

• Heading: “HWH COMPUTERIZED LEVELING” • Lower Middle green indicator

light is labeled “TRAVEL MODE” not “TRAVEL”.

Touch panel has a five-pin connector on back.

• Control box has an 8” x 11” clear plastic cover. • Control boxes are stacked.

• Electronic (rectangular) level sensor is mounted inside of control box.

• Use for Air Leveling or combination Air/Hydraulic Leveling. • Can have Auxiliary Hand-Pump Control.

Page 14: HWH® SYSTEM IDENTIFICATION GUIDE   system identification guide leveling, stabilizing & landing gear systems (filename: ... block frame and tires securely before

C:\2_SOPs\ML17785(Engineering)\ml17785_01_nom_pr_lesy.doc | Revised: 08OCT15 | Page 14 of 15

HAND-PUMP

2-POINT LANDING GEAR PRODUCED: YYYY - YYYY

HWH® 2-Point Landing Gear System - Hand/Electric Pump (Toggle/Momentary Switch-Controlled) or (Rocker/Momentary Switch-Controlled)

(Remote Operating Panel) (Electric Motor / Solenoid Pump) (Manual Hand Pump as Back-Up)

(ML42337)

4-POINT LEVELING / LANDING GEAR PRODUCED: YYYY - YYYY

HWH® 4-Point Leveling / Landing Gear System - Hand/Electric Pump (Computer-Controlled Touch Panel Full Leveling) (Remote Operating Panel)

(Electric Motor / Solenoid Pump) (Manual Hand Pump as Back-Up) (ML43108)

4-POINT LEVELING / LANDING GEAR

PRODUCED: YYYY - YYYY HWH® 4-Point Leveling / Landing Gear System - Hand/Electric Pump

(Hydraulic Switch-Controlled Leveling) (Operation at Pump) (Electric Motor Pump) (Manual Hand Pump as Back Up)

(Optional Leveleze® Indicator Light Package) (ML42335)

4-POINT LEVELING / LANDING GEAR

PRODUCED: YYYY - YYYY HWH® 4-Point Leveling / Landing Gear System - Hand/Electric Pump

(Hydraulic Switch-Controlled Leveling) (Operation at Pump) (Manual Hand Pump - No Motor) (NO ELECTRIC POWER REQUIRED)

(ML42336)

EMERGENCY JACK SYSTEM PRODUCED: YYYY - YYYY

HWH® 4-Point Emergency Jack System (Toggle Switch-Controlled) (Remote Pendant Operating Panel)

(No Indicator or Warning Lights) (Electric Motor Pump) (Manual Hand Pump as Back Up)

(Operator Manual# ML46130)

PICTURE - GET FROM MP35.9953

Page 15: HWH® SYSTEM IDENTIFICATION GUIDE   system identification guide leveling, stabilizing & landing gear systems (filename: ... block frame and tires securely before

C:\2_SOPs\ML17785(Engineering)\ml17785_01_nom_pr_lesy.doc | Revised: 08OCT15 | Page 15 of 15

ACTIVE AIR SUSPENSION

ACTIVE AIR SUSPENSION HWH® Active Air Suspension & Computer-Controlled Air Leveling System

(with BI-AXIS® Control ) (with Color LCD Control Module Panel) or (with Monochrome LCD Control Module Panel)

(Hydraulic Leveling Optional)

CONTROL PANELS CONTROL MODULE & SENSING UNIT

PICTURE COLOR LCD

PICTURE MONOCHROME LCD

PICTURE CONTROL MODULE

SENSING UNIT