Huck-Spin

7/28/2019 Huck-Spin

1/9

7/28/2019 Huck-Spin

2/9

Huck-Spin Fastening System

1The pin is inserted into the

prepared hole while the collar is

threaded onto the pin by hand.

2The installation tool spins onto the

threaded pin, clamping the work

together tightly.

3The tool simultaneously pulls up

on the pin while pushing down

the collar, pressing or swag-

ing the collar material into the

threads of the fastener for a

secure, permanent joint.

4The tool spins off, completing

the installation in about half the

time required for an ordinary

torqued fastener.

Pin protrusion allows easy removal withSpincutterTMsystem

High fatigue thread form extends the life ofyour structure

Corrosion resistant coatings can be painted

Excellent gap pull-out and high retained clamp

Proven a top performer for overa decade, the Huck-Spin fasten-

ing system is the most reliable and

advanced system of its kind,

ideal for high volume OEM

applications, heavy assembly, and

aftermarket repair.

In short, the patented Huck-Spin has

revolutionized lockbolt technology.

Because of the unique, low-impact,

straight-line installation process,

Huck-Spin fasteners deliver a more

secure joint than any other fastening

system with installation speeds

up to 50% faster than an impact

wrench working with conventional

nuts and bolts. The installation

process is fast and ef fortless, and

a quick, visual inspection is all

thats needed for quality control, as

opposed to the lengthy torque

testing required with nuts and bolts.

No other fastening system can

match the productivity provided by

the Huck-Spin.

This swaging process virtually

eliminates human error, providing

a more precise, consistent installa-

tion. A Huck-Spin installation retains

much higher clamp load and

delivers up to 8 times greater

fatigue strength.

The Huck-Spin system utilizes a

computer-based control station

featuring an easy-to-use custom

interface, further ensuring a high

standard of quality and productivity.

And because the Huck-Spin fastener

is designed with no pintail, youll

improve factory safety and signifi-

cantly reduce noise in the workplace.

With Huck-Spin, youll realize

greater productivity while your

customers eliminate problems due

to fasteners loosening. Their cost

of warranty repair and rework will

decrease significantly, adding to

their bottom line.

The Huck-Spin Advantage

Overall, the Huck-Spin

Fastening System offers several

distinct advantages over other

conventional fasteners:

Wider grip range

Highly sustained and

consistent clamp

Fast installation

Quick, visual inspection of the fully

swaged collar (no time-consuming

torque check is needed)

Shock-free installation

Reduction of manufacturing noise

Elimination of pintail waste

Elimination of loosening problems

Eliminates corrosion-prone pintail

breaking point

Hex head style also available,

allowing removal with a

standard impact wrench

Safe, easy-to-use spin collar

cutter available

Offered in metric and inch series

Huck-Spin. The efficient and ergonomic

high strength fastening system.

Installation Sequence

Flanged collar and headspread load to ensurestructural integrity

7/28/2019 Huck-Spin

3/9

Huck-Spin Metric Series

5


Inspection DataFLANGED HEAD Metric (mm)

Nominal A (Min) B (Max) C (Min) D (Max)Diameter Pin Pin Swage Flange

Pultrusion Pultrusion Length Diameter

DT12 10.3 22.3 15.5 ?

DT14 12.04 30.1 16.2 ?

DT16 13.8 25.8 19.9 ?

DT20 17.2 29.2 23.8 ?

Flanged Head

Flanged Head

A Shank B Underhead C Head D Head E Collar G Collar H Collar I Collar Maximum Tensile Clamp Shear NoseDiameter Pin/Part Number Collar Grip Range Length Length Height Diameter Flanged Dia. Height O D I D Hole Strength Strength Strength Assembly Tool

(mm) Number (ref.) (max.) (max.) (max.) (max.) (max.) (max.) (ref.) Size (mm) (lbs.) (lbs.) (lbs.) Number Number

12 MHSPF-DT12-10 MHSCF-R12 4-16 4.00 46.04 9.70 25.50 26.25 18.49 19.30 12.29 13.5 19,720 14,610 15,750 99-7412-1 HS37













14 MHSPF-DT14-30 MHSCF-R14 24-39 24.00 74.42 11.50 30.00 31.00 20.90 23.40 14.70 15.5 26,908 19,780 21,570 99-7414-1 HS37 14 MHSPF-DT14-35 MHSCF-R14 29-44 29.00 79.42 11.50 30.00 31.00 20.90 23.40 14.70 15.5 26,908 19,780 21,570 99-7414-1 HS37






















16 MHSPF-DT16-70 MHSCF-R16 64-76 64.00 114.41 12.80 35.00 34.75 23.39 25.63 16.46 17.5 36,650 26,080 28,320 99-7315-1 HS52 16 MHSPF-DT16-75 MHSCF-R16 69-81 69.00 119.41 12.80 35.00 34.75 23.39 25.63 16.46 17.5 36,650 26,080 28,320 99-7315-1 HS52












MeetsmetricDINgrade10.9Materialvalues.Grade8.8available.Contactfactoryfordetails.

StainlessSteelandAluminumvariationscapabilitiesuponrequest.Contactfactoryfordetails.

A

C

D

B

AC D

E

B

I H

G

7/28/2019 Huck-Spin

4/9



Nominal A (Min) B (Max) C (Min) D (Max)Diameter Pin Pin Swage Flange

Pultrusion Pultrusion Length Diameter

DT12 10.3 22.3 14.0 ?

DT16 13.8 25.8 17.7 ?

DT20 17.2 29.2 23.1 ?

Inspection DataHEX HEAD Metric (mm)

Hex Head

MeetsmetricDINgrade10.9Materialvalues.Grade8.8available.Contactfactoryfordetails.

StainlessSteelandAluminumvariationscapabilitiesuponrequest.Contactfactoryfordetails.

Hex Head

A Shank B Underhead C Head D Head E Collar G Collar H Collar I Collar Maximum Tensile Clamp Shear NoseDiameter Pin/Part Number Collar Grip Range Length Length Height Diameter Flanged Dia. Height O D I D Hole Strength Strength Strength Assembly Tool

(mm) Number (ref.) (max.) (max.) (max.) (max.) (max.) (max.) (ref.) Size (mm) (lbs.) (lbs.) (lbs.) Number Number

12 MHSF-DT12-10 MHSH-R12 4-16 4.00 50.10 12.00 15.20 N/A 23.48 19.89 12.88 13.5 19,720 14,610 9,850 99-7412-1 HS37












16 MHSF-DT16-17 MHSH-R16 10-24 10.00 67.54 15.10 21.00 N/A 28.98 26.00 16.80 17.5 36,650 26,080 17,350 99-7315-1 HS5216 MHSF-DT16-20 MHSH-R16 14-26 14.00 69.54 15.10 21.00 N/A 28.98 26.00 16.80 17.5 36,650 26,080 17,350 99-7315-1 HS52






















C B

D

A

E HI

G

A

C

D

B

7/28/2019 Huck-Spin

5/9

7/28/2019 Huck-Spin

6/9

7/28/2019 Huck-Spin

7/9

1

Huck-SpinToolingHuck-Spin Tooling

Hydraulic Tools & Nose Assemblies/ Inch Series

Hydraulic Tools

Tool Model HS7 Series HS24 Series HS37 Series HS52 Series 2624HS HSSFT-M12 HSSFT-M16

Nose Assembly 1/4" 99-7300

5/16" 99-7301

3/8" 99-7302,99-7303

99-7330 99-7307 99-7306-1,99-7308-1 99-7500 1/2" 99-7312-1 99-7309-1,99-7313-1 99-7500CC

99-7550CC

99-7331 99-7315-1,99-7316-1 99-7501 99-7602 5/8" 99-7317-1,99-7318-1 99-7501CC

99-7551CC

3/4" 99-7314-1 99-7503 99-7553CC 99-7503CC

1" 99-7321,99-7322

Model 2624HS Hydraulic Tool

Weight: 14.0lbs

Length: 7.4"

Height: 7.7"

Width: 3.4"

Installation Tooling

The Huck-Spin Installation Tool employs a unique spinon, swage, spin off routine to install Huck-Spin fasteners

with a secure clamp, but without the typical pinbreak.

Hydraulic power for the tool is provided by the electric-powered HUCK POWERRIG 18 or 0.

Hydraulic Tools & Nose Assemblies/ Metric Series

Hydraulic Tools

Tool Model HS24 Series HS37 Series HS52 Series 2624HS HSSFT-M12 HSSFT-M16

Nose Assembly 12mm 99-7430 99-7412-1 99-7413-1,99-7560CC 99-7510,99-7510CC

14mm 99-7414-1,99-7416-1 99-7415-1,99-7561CC 99-7511,99-7511CC 99-7700

16mm 99-7315-1,99-7316-1 99-7501,99-7501CC 99-7602 99-7317-1,99-7318-1

99-7551CC

20mm 99-7418-1,99-7562CC 99-7512,99-7512CC

HS7 Hydraulic Tool HS37 Hydraulic Tool HS37 RH Hydraulic Tool HS52 Hydraulic Tool HS52 RH Hydraulic Tool

Weight: 5.9lbs Weight: 30.0lbs Weight: 30.0lbs Weight: 40.0lbs Weight: 40.0lbs

Length: 8.39" Length: 10.912" Length: 15.61" Length: 11.787" Length: 16.34"

Height: 8.85" Height: 7.460" Height: 7.46" Height: 11.000" Height: 11.00"

Width: 1.83" Width: 3.280" Width: 3.28" Width: 4.280" Width: 4.28"

HS52HS7

Installation Tooling

HSSFT-M16 Swage Forward

Weight: TBDlbs

Length: ."

Height: ."

Width: ."

Hydraulic Collar Cutter Nose

Hydraulic Tools

Tool Model HS24 Series HS37 Series HS52 Series 2624HS HSSFT-M12 HSSFT-M16

Nose Assembly 12mm

14mm

16mm

20mm

7/28/2019 Huck-Spin

8/9

15

Huck-Spin ToolingPOWERIG

HUCK offers three basic POWERIG hydraulic power unitsfor both in-plant and on-site use. Available in a choice ofgasoline or electric power, there is a POWERIG available

to deliver a hydraulic flow rate ranging from 0 cu. inchesto gallons per minute.

POWERIG 918Specifications

Weight:7 80 l bs . op er at io na l

585lbs.w/ohydraulicfluid

Power:

electric,220or440volts,

3phase

Length:44in.

Height:30in.

Width:

25in.

Flow Rate:

2.0gpmpertoolstation

The Model 918 POWERIG is the largesthydraulic unit offered by HUCK. Sized for highproduction applications the unit can operate upto three tools independently. This electricallypowered model also delivers sufficient power tooperate the tools up to 100 feet away.A 22-gallon reservoir stores hydraulic fluid, witha filter-strainer in the suction line to assure clean,filtered fluid.

POWERIG 940Specifications

Weight:7 4. 5 lb s. o pe ra ti on al

66lbs.w/ohydraulicfluid

Power:

electric,115or220volts,

singlephase

Length:12.5in.

Height:18in.

Width:

10.5in.

Flow Rate:

70cu.in/min.@5,000psi

Reservoir Capacity:

1.5gallons

Options:220V,60/50hertzsinglephase,

250VDC,directcurrent

The Model 940 POWERIG is a portable unitsized for moderate production and repairapplications. This unit features ruggedconstruction for durability in the field, and thechoice of 115 or 22 0 Volt AC power. The Model940 includes a handle for easy transport, simpleadjustable hydraulic outputs and quick-connectcouplers for connecting installation tool hoses.

Now, take the red-hot out of the repair process withthe cool as in room temperature way to cutthrough the collars of Huck-Spin lockbolts.

With the new Huck SpinCutter from Alcoa Fastening

Systems, you can leave your oxy-acetylene torch in the

corner and remove Huck-Spin fasteners with a tool that

couldnt be easier or safer to operate.

The SpinCutter splits Huck-Spin collars smoothly and

swiftly by hydraulic action. Mastered in minutes, it

eliminates the special skills and safety precautions that

cutting-torches require.

This time-saving, production-quality tool also

eliminates the frequent and costly blade replacements

you may have experienced with other collar cutters.

Forget a dozen or two dozen cuts: the SpinCutter offe rs

the durability to split more than a thousand Huck-Spincollars before needing a new set of blades.

Whats more, the Huck SpinCutter Collar Cutting Kit

comes with a nose assembly for installing new Huck-Spin

fasteners when finishing up a repair job. Thats double

the duty and double the value from a single tool.

So let the torch be extinguished. The faster, safer,

and much, much cooler approach to Huck-Spin collar

removal is here. Call your Alcoa Fastening Systems

distributor for complete information or go to www.huck.

com/cutter.

Huck SpinCutter Kit Contents

Huck HS hydraulic tool and hoses

Huck SpinCutter nose assembly

Huck-Spin installation nose assembly

Compact air-driven power source

Huck POWERIG 0 is optional at extra cost (tool and noses

are available independently for existing POWERIG owners)

Huck SpinCutter

964 PORTABLEHYDRAULICPOWERSOURCE

FOR REPA IRUSE ONLY,MA NUAL SHIFTFROM PULL TO RETUR N

FORUSEWITH2624HSONLY

REQUIRES110VAC

940 PORTABLEHYDRAULICPOWERSOURCE

FORREPAIR&LIGHTPRODUCTIONSERVICE

REQUIRES110VAC

940-220 PORTABLEHYDRAULICPOWERSOURCE

FORREPAIR&LIGHTPRODUCTIONSERVICE

REQUIRES220VAC

940HS TYPEVIPOWERIGCONTROLLER

PORTAB LE HY DR AULICP OW ER SOURCEWITHINTER NA L

CONTROLLER FORREPAIR& LIGHTP RODUCTION SERVICE

ADJUSTABLEPRESSURES&NONADJUSTABLETIMERS

REQUIRES110VAC&90psiAIR

POWERIG P/N DESCRIPTION

Collar Pin

Material Collar Pin Finish Finish

Steel Low Medium ZincPlated ZincPlated

CarbonSteel CarbonSteel ClearChromate GoldChromate

Stainless 302 305/304 Passivated DryLubricated

FASTENER MATERIALS AND FINISHES

FASTENER ORDERING INFORMATION

FollowtheformbelowtoconstructapartnumberfororderingHuck-Spinfasteners.RefertotheGripDatachartforgripnumbers.

HST(STYLE) - (MATERIAL) (DIAMETER) (GRIP NUMBER)Example: HST-DT16-8is a Standard Collar, Truss Head, Medium Carbon Steel, 1/2" Diameter, Grip: 1/16" increments

Style

ProtrudingHead P

TrussHead T

100FlushHead 100

FlangeHead F

Diameter

3/16 6

1/4 8

3/8 12

Material

Steel R

StainlessSteal U

940-220HS TYPEVIPOWERIGCONTROLLER

PORTABLEHYDRAULICPOWER SOURCE WITH INTERNAL

CONTROLLER FOR REPAIR & LIGHTPR ODUCTIONSER VICE

ADJUSTABLEPRESSURES&NONADJUSTABLETIMERS

REQUIRES110VAC&90psiAIR

918 Series 2 T OO L, S TATI ONARY HYDRAU LI C POWER SOURCE

FORHEAVYPRODUCTIONSERVICE

918-5 Series 3 T OO L, S TATI ONARY HYDRAU LI C POWER SOURCE

FORHEAVYPRODUCTIONSERVICE

POWERIG P/N DESCRIPTION

Installation Tool

7/28/2019 Huck-Spin

9/9

For the Long Haul

Your Authorized DistributorAmericas

Headquarters

8001 Imperial Drive

Waco, TX 1, USA

P.O. Box 811

Waco, TX 1-811, USA

Tel: 800 88 85

Fax: 800 8 85

Indianapolis Distribution

5 West 8th Street

Indianapolis, IN 8, USA

Tel: 800 0 ext 1

Fax: 800 5 5

Kingston Operations

1 Corporate Drive

Kingston, NY 101, USA

Tel: 800 8 85

Fax: 85

Latin America Sales

Avenida Parque Lira

-0 TacubayaMEXICO C P 11850

Tel: 5 55 5515 1

Fax: 5 55 5 5

Mississauga Distribution

150 Kennedy Road, Unit 10

Mississauga, Ontario L5T-J

CANADA

Tel: 05 5 85

Fax: 05 5 1

Stoughton Operations

Campanelli Parkway

Stoughton, MA 00, USA

Tel: 800 0 ext

Fax: 800 1

Waco Operations

8001 Imperial Drive

Waco, TX 1, USA

P.O. Box 811

Waco, TX 1-811, USA

Tel: 800 88 85

Fax: 800 8 85

International Locations

Melbourne Operations

0 Stamford Road

Oakleigh, Victoria, 1

AUSTRALIA

Tel: 1 5

Fax: 1 5 180

Shanghai Sales

No.1, Zhongshan Xi Road

Hailuo Building, Room 50

Shanghai, 00051, CHINA

Tel: 8-1-00

Fax: 8-1-01

Singapore Sales

Blk 1 Pandan Loop

#0-1 Pantech IndustrialComplex 188, SINGAPORE

Tel: 5 8

Fax: 5 8 01 51

Telford Operations

Unit C, Stafford Park

Telford, Shropshire TF, BQ

UNITED KINGDOM

Tel: 15 0011

Fax: 15 05

Alcoa Fastening Systems Commercial Products: A Global Organization

Alcoa Fastening Systems (AFS) maintains company officesin the United States and Canada, with offices in many other

countries. Authorized AFS fastener distributors are also

located in many of the worlds industrial centers, where theyprovide a ready source of AFS fasteners, installation tools,

tool parts, and application assistance.

For The Long Haul, The Future of Fastening Technology,

The Future of Assembly Technology, The Future of Tooling

Technology, and Tools of Productivity are service marks of Alcoa

Fastening System. AFS provides technical assistance regarding the

use and application of both fasteners and tooling.

NOTICE: The information contained in this publication is only for

general guidance with regard to properties of the products shown

and/or the means for selecting such products, and is not intended

to create any warranty, express, implied, or statutory; all warranties

are contained only in AFSs written quotations, acknowledgements,

and/or purchase orders. It is recommended that the user secure

specific, up-to-date data and information regarding each applica-

tion and/or use of such products.

Easy to use consistent accuracy with little operatortraining required

High productivity reducing installation time by 25% to 50%

Reduced QC procedures a visual inspection is sufficient to verifya correct installation

High clamp performance typically much higher than withconventional fasteners

Durability extremely high clamp force retention, with 10%to 20% greater fatigue life than conventional threaded fasteners

The Benefits of Huck Fastening SystemsHuck fastening systems deliver a number of important benefits,making them the worldwide leader.

005 Alcoa Fastening SystemsE-mail: [email protected] www.alcoafasteningsystems.com

B-AFS106 1005-00M One Great ConnectionSM

Documents

Huck-Spin