2
Türkiye: [email protected] Tel: +9 212 544 59 59 www.imbelectric.com

HS-100 Series Vibration Sensorimbelectric.com/Uploaded/TS005.pdfTS005 Iss04 Please contact our Sales Office for information on sensor accessories (mounting studs, etc) and multichannel

  • Upload
    others

  • View
    0

  • Download
    0

Embed Size (px)

Citation preview

Page 1: HS-100 Series Vibration Sensorimbelectric.com/Uploaded/TS005.pdfTS005 Iss04 Please contact our Sales Office for information on sensor accessories (mounting studs, etc) and multichannel

Operating Temperature RangeSealingMaximum ShockEmissionsImmunity

-50 to 140 ºCIP685000 gEN61000-6-4:2001EN61000-6-2:1999

Case MaterialSensing Element/ConstructionMounting TorqueWeightMaximum Cable lengthCableMounting ThreadsSubmersible DepthOptions

Stainless SteelPZT/Compression8 Nm120 gms (nom)1000 metresBlue silicon screened - length to be specified with orderSee 'How to order' table 100 metres max (10 bar)Intrinsically safe, connector, cable length,various mounts, other sensitivities

Mounted Base ResonanceSensitivityFrequency Response

IsolationMeasurement RangeTransverse SensitivityElectrical

18 kHz (nominal)100 mV/g ±10% Nominal 80 Hz at 22 ºC2 Hz to 10 kHz ±5 %0.8 Hz to 15 kHz ±3 dBBase isolated±80 gLess than 5%

Typical Applications

Proven use in vibration monitoringfor offline applications using commerciallyavailable data collectors and onlinemonitoring systems in the fields ofBuilding Services, Civil Engineering,Paper and Pulp, Mining, Metals Manufacture,Utilities, Automotive, Water and WasteTreatment, Pharmaceutical, Aerospace, etc.

Protecting...Fans, Motors, Pumps, Compressors,Centrifuges, Conveyers, Air Handlers,Gearboxes, Rolls, Dryers, Presses,Cooling, HVAC, Spindles, Machine Tooling,Process Equipment and many more.

HS-100 Series Vibration SensorSubmersible, 100 mV/g Industrial Accelerometer

Technical Performance

Environmental

Mechanical

Electrical NoiseCurrent RangeBias VoltageSettling TimeOutput ImpedanceCase Isolation

0.1 mg max0.5 mA to 8 mA10 - 12 Volts DC2 seconds200 Ohms max.>10 Ohms at 500 Volts8

Türkiye: [email protected] Tel: +9 212 544 59 59 www.imbelectric.com

Page 2: HS-100 Series Vibration Sensorimbelectric.com/Uploaded/TS005.pdfTS005 Iss04 Please contact our Sales Office for information on sensor accessories (mounting studs, etc) and multichannel

HS-100 Series Vibration Sensor

Dimensions

Frequency Response

Tel: +44(0) 845 680 1957Fax: +44(0) 845 680 1958Email: [email protected]: www.hansfordsensors.com

Ref: HS100SubC-0109

Mounting of sensor to achieve good repeatable readings.Vibration sensor should be firmly fixed to a flat surface (spotface surface may be needed to be produced and cable anchoredto sensor body.)

TS005 Iss04

Please contact our Sales Office for information on sensor accessories (mounting studs, etc) and multichannel switch boxes.

We reserve the right to alter the specification of this product without prior notice.

Red

Black

White

How to order