EN/I

HPSB series power supply unit - multi-output 27,6VBuffer, switch mode power supply unit HPSB 27,6V/2x1,5A/2x7Ah

Features:Buffer PSU, switched-mode, without a microprocessor-based operating control, multi-output, with 2x1,5A/27,6VDC outputs, fitting 2x7Ah batteries.

Description:Mounting the AWZ586 LB2 2x1,5A (GLASS FUSE) fuse module, inside the HPSB3524B (27,6V/3A/2x7Ah) PSU, it is possible to configure a 2x1,5A/27,6VDC buffer PSU with a buffering function (2x7Ah).

In order to configure the PSU, one must buy and install:

Code: Name:1. HPSB3524B 27,6V/3A/2x7Ah buffer, switch mode power supply unit 2. AWZ586 LB2/1,0A/FTA fuse module (GLASS FUSE)3. 2x7Ah Batteries 2x7Ah

Intended use:The PSU can be applied for supplying devices that require direct current of zasilania 27,6V/2x1,5A, with a buffering function (2x7Ah).

Picture and block diagram:

PSUHPSB3524B

Fuse module AWZ586 LB2 2x1,5A FTA (GLASS FUSE)

Batteries2x7Ah

PSUHPSB3524B

2x1,5A/27,6VDC

2 x Battery7Ah

Fuse module:AWZ586

LB2/2x1,5A/FTA (GLASS FUSE)

EN/I

HPSB series power supply unit - multi-output 27,6VBuffer, switch mode power supply unit HPSB 27,6V/3x1A/2x7Ah

Features:Buffer PSU, switched-mode, without a microprocessor-based operating control, multi-output, with 3x1A/27,6VDC outputs, fitting 2x7Ah batteries.

Description:Mounting the AWZ576 LB4 3x1A (GLASS FUSE) fuse module, or AWZ575 LB4 3x1A (POLYMER FUSE) inside the HPSB3524B (27,6V/3A/2x7Ah) PSU, it is possible to configure a 3x1A/27,6VDC buffer PSU with a buffering function (2x7Ah).

In order to configure the PSU, one must buy and install:

Code: Name:1. HPSB3524B 27,6V/3A/2x7Ah buffer, switch mode power supply unit 2. AWZ576 LB4/0,3 -1,0A/FTA fuse module (GLASS FUSE) or or3. AWZ575 LB4/1A/PTC fuse module (POLYMER FUSE)4. 2x7Ah Batteries 2x7Ah

Intended use:The PSU can be applied for supplying devices that require direct current of zasilania 27,6V/3x1A, with a buffering function (2x7Ah).

Picture and block diagram:

PSUHPSB3524B

Fuse module AWZ576 LB4 3x1A FTA (GLASS FUSE)or AWZ575 LB4 3x1A PTC (POLYMER FUSE)

Batteries 2x7Ah

PSUHPSB3524B

Fuse module:

AWZ576LB4/3x1A/FTA (GLASS FUSE)

or AWZ575LB4/3x1A/PTC (POLYMER FUSE)

3x1A/27,6VDC

2 x Battery7Ah

EN/I EN/I

HPSB series power supply unit - multi-output 27,6VBuffer, switch mode power supply unit HPSB 27,6V/6x0,5A/2x7Ah

Features:Buffer PSU, switched-mode, without a microprocessor-based operating control, multi-output, with 6x0,5A/27,6VDC outputs, fitting 2x7Ah batteries.

Description:Mounting the AWZ580 LB8 6x0,5A (GLASS FUSE) fuse module, or AWZ578 LB8 6x0,5A (POLYMER FUSE) inside the HPSB3524B (27,6V/3A/2x7Ah) PSU, it is possible to configure a 6x0,5A/27,6VDC buffer PSU with a buffering function (2x7Ah).

In order to configure the PSU, one must buy and install:

Code: Name:1. HPSB3524B 27,6V/3A/2x7Ah buffer, switch mode power supply unit 2. AWZ580 LB8/0.3-1.0A/FTA fuse module (GLASS FUSE) or or3. AWZ578 LB8/1A/PTC fuse module (POLYMER FUSE)4. 2x7Ah Batteries 2x7Ah

Intended use:The PSU can be applied for supplying devices that require direct current of zasilania 27,6V/6x0,5A, with a buffering function (2x7Ah).

Picture and block diagram:

PSUHPSB3524B

Fuse module AWZ580 LB8 6x0,5A FTA (GLASS FUSE)or AWZ578 LB8 6x0,5A PTC (POLYMER FUSE)

Batteries 2x7Ah

PSUHPSB3524B

6x0,5A/27,6VDC

Fuse module:AWZ580

LB8/6x0,5A/FTA (GLASS FUSE)or AWZ578

LB8/6x0,5A/PTC (POLYMER FUSE)

2 x Battery7Ah

EN/I

HPSB series power supply unit - 24VBuffer, switch mode power supply unit HPSB 27,6V/24V/2,5A/2x7Ah

Features:Buffer PSU, switched-mode, without a microprocessor-based operating control, with 2,5A/24VDC, outputs, fitting 2x7Ah batteries.

Description:Mounting the RN25024 (27,6V/24V/2,5A) voltage reducer, which is intended for lowering the voltage from 27,6V into 24V inside the HPSB3524B (27,6V/3A/2x7Ah) PSU, it is possible to configure a 2,5A/24VDC buffer PSU with a buffering function (2x7Ah).

In order to configure the PSU, one must buy and install:

Code: Name:1. HPSB3524B 27,6V/3A/2x7Ah buffer, switch mode power supply unit 2. RN25024 27,6V/24V/2,5A voltage reducer3. 2x7Ah Batteries 2x7Ah

Intended use:The PSU can be applied for supplying devices that require direct current of 24V/2,5A, with a buffering function (2x7Ah).

Picture and block diagram:

PSUHPSB3524B

Batteries2x7Ah

PSUHPSB3524B

2,5A/24VDC

Voltage reducer:RN25024 (27,6V/24V/2,5A)(reduces voltage from 27,6V into 24V)

Voltage reducer: RN25024

(27,6V/24V/2,5A)

2 x Battery7Ah

EN/I EN/IFeatures:Buffer PSU, switched-mode, without a microprocessor-based operating control, multi-output, with 2x1A/24VDC outputs, fitting 2x7Ah batteries.

Description:Mounting the RN25024 (27,6V/24V/2,5A) voltage reducer, which is intended for lowering the voltage from 27,6V into 24V and the AWZ586 LB2 2x1A (GLASS FUSE) or AWZ585 LB2 2x1A (POLYMER FUSE) fuse module, inside the HPSB3524B (27,6V/3A/2x7Ah) PSU, it is possible to configure a 2x1A/24VDC buffer PSU with a buffering function (2x7Ah).

In order to configure the PSU, one must buy and install:

Code: Name:1. HPSB3524B 27,6V/3A/2x7Ah buffer, switch mode power supply unit2. RN25024 27,6V/24V/2,5A voltage reducer 3. AWZ586 LB2/1A/FTA fuse module (GLASS FUSE) or or4. AWZ585 LB2/1A/PTC fuse module (POLYMER FUSE)5. 2x7Ah Batteries 2x7Ah

Intended use:The PSU can be applied for supplying devices that require direct current of 24V/2x1A, with a buffering function (2x7Ah).

Picture and block diagram:

HPSB series power supply unit - multi-output 24VBuffer, switch mode power supply unit HPSB 27,6V/24V/2x1A/2x7Ah

PSUHPSB3524B

Fuse module AWZ586 LB2 2x1A FTA (GLASS FUSE)or AWZ585 LB2 2x1A PTC (POLYMER FUSE)Batteries 2x7Ah

PSUHPSB3524B

Fuse module:

AWZ586LB2/2x1A/FTA (GLASS FUSE)

or AWZ585LB2/2x1A/PTC (POLYMER FUSE)

2x1A/24VDC

Voltage reducer:RN25024 (27,6V/24V/2,5A)(reduces voltage from 27,6V into 24V)

Voltage reducer:RN25024 (27,6V/24V/2,5A)

2 x Battery7Ah

EN/I

HPSB series power supply unit - 5V÷18V/2A÷1,3ABuffer, switch mode power supply unit HPSB 27,6V/5V÷18V/ 2A÷1,3A/2x7AhFeatures:Buffer PSU, switched-mode, without a microprocessor-based operating control, with 2A÷1,3A/5V÷18V outputs, fitting 2x7Ah batteries.

Description:Mounting the DCDC20 voltage converter, which is intended for lowering the voltage from 27,6V into 5V÷18V inside the HPSB3524B (27,6V/3A/2x7Ah) PSU, it is possible to configure a 2A÷1,3A/5V÷18V buffer PSU with a buffering function (2x7Ah).

In order to configure the PSU, one must buy and install:

Code: Name:1. HPSB3524B 27,6V/3A/2x7Ah buffer, switch mode power supply unit2. DCDC20 DCDC/2A voltage converter module3. 2x7Ah Batteries 2x7Ah

Intended use:The PSU can be applied for supplying devices that require voltage within the range of 5V÷18V/2A÷1,3A, with a buffering function (2x7Ah).

Picture and block diagram:

PSUHPSB3524B

Voltage converter module DCDC20 (5V÷18V/2A÷1,3A)(reduces voltage from 27,6V into 5V÷18V)

Batteries 2x7Ah

PSUHPSB3524B

2A÷1,3A/5V÷18V

Voltage converter moduleDCDC20

2 x Battery7Ah