193
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners. WARNING Pressing the printer icon or “quick printing” this document will print all of the guides in this compilation. Open the Bookmarks menu and find your vehicle OR scroll down until you find the install guide for your vehicle. Print only the pages for your vehicle using the advanced options in the Print menu. Install your Maestro RR according to the guide for your vehicle. HOW TO USE THIS INSTALL GUIDE 1 2 3 SELECT VEHICLE PRINT PAGES NEEDED

HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

  • Upload
    others

  • View
    3

  • Download
    0

Embed Size (px)

Citation preview

Page 1: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certifi ed technician. Logos and trademarks used here in are the properties of their respective owners.

WARNINGPressing the printer icon or “quick printing” this document will print

all of the guides in this compilation.

Open the Bookmarks menu and find your vehicle OR scroll down until you find the install guide for your vehicle.

Print only the pages for your vehicle using the advanced options in the Print menu.

Install your Maestro RR according to the guide for your vehicle.

HOW TO USE THIS INSTALL GUIDE1

2

3

SELECT VEHICLE PRINT PAGES NEEDED

Page 2: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

OPTIONAL ACCESSORIESNone

PROGRAMMED FIRMWAREADS-RR(SR)-GMS05-AS

PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro GM5+ Installation Harness

INSTALL GUIDEBUICk ENCLAvE

2008-2014Retains steeRing wheel contRols, onstaR, bluetooth and moRe!

NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.

Page 3: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

buick enclave 2008-2014

Automotive Data Solutions Inc. © 2015 2

WELCOME

NEED hELP?

Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.

Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.

1 866 427-2999

[email protected]

maestro.idatalink.com/supportwww.12voltdata.com/forum

TABLE OF CONTENTS

Before Installing 3

Installation Instructions 4

Wiring Diagram with an Amplifi er 5

Wiring Diagram without an Amplifi er 6

Page 4: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

buick enclave 2008-2014

Automotive Data Solutions Inc. © 2015 3

BEFORE INSTALLING STEP 1

DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:

METHOD 1: Look for the following logos in the vehicle. They are usually on the speaker covers or on the radio unit. If you fi nd any of the following logos Bose, Pioneer or Monsoon, you have a factory amplifi er.

METHOD 2: Look for the following sticker in the glove box. This sticker will indicate all the Regular Production Option (RPO) codes. If you fi nd any of the following codes UQA, UQS or UQG, you have a factory amplifi er.

STEP 2IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:

Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifi er and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits.

IF YOUR VEHICLE NOT IS EQUIPPED WITH A FACTORY AMPLIFIER:

Follow the installation instructions and complete the installation as shown in the wiring diagram without an amplifi er.

1

SERVICE PARTS IDENTIFICATION DO NOT REMOVE

AGI AG2 AJ1 AL0 AM7 AN3 AU0 AU3 A31 B30 B4UB58 B81 B82 CJ3 C49 C7H DF5 DK7 DL3 DT4 D07EVA E63 FF8 FF9 GT5 G80 JC4 KC4 KNP KUP K34K47 K68 LQ9 M32 NCI NEI NP3 NP5 OSG P30 QSSR4Y R9U R9Z SAF SLM TRB UC6 UK3 UQA U2K UFIUF3 UK3 VR4 VTV VXS V73 XSS X88 YD3 YD6 YE9YSS ZGC ZYI Z60 Z82 ISS ISZ 4IU 6YT 691 6927YT

BC/CC U 8555 692

143 5 FXWH2Q CKI57532GCEK19N031344764

Page 5: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

buick enclave 2008-2014

Automotive Data Solutions Inc. © 2015 4

INSTALLATION INSTRUCTIONS STEP 1

• Unbox the aftermarket radio and locate its main harness.

• Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.

STEP 2

• Connect the factory harness to the GM5+ T-harness.

STEP 3• Plug the aftermarket radio harnesses into the aftermarket

radio.

• Plug the Data cable to the data port of the aftermarket radio.

• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.

STEP 4• Connect all the harnesses to the Maestro RR module then

proceed to module setup.

The module is now ready to be used.

Insert the aftermarket radio in the dashboard housing and test all the functionalities.

Reassemble the dashboard carefully.

AMPLIFIER ONLYDETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS

• If your vehicle is equipped with a factory amplifi er you can connect the RCA wiring to the low level outputs of your aftermarket radio, or connect the level matching circuits to the speaker outputs of the aftermarket radio.

• If your aftermarket radio does not have low level outputs, has only a single RCA output, or the RCA output level is 2 volts or less then it is recommended to connect the level matching circuit to the speaker outputs. If the volume does not go loud enough using the RCA connections, the level matching circuits can be used.

• The internal amplifi er in some radios is not compatible with the level matching circuit. In these cases, there will be fl oor noise (hissing or buzzing at low levels) when the level matching circuit is connected. Change to the RCA connections to eliminate this noise.

TROUBLESHOOTING TIPS:

• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.

• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”

1

Page 6: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

buick enclave 2008-2014

Automotive Data Solutions Inc. © 2015 5

B

C

A FG

C

AB

G

F

CENTERCENTER

SUBSUB

BACKUP CAMBACKUP CAM

1A

E

E

BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)

WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)

PURPLE/BLACK - RR SPEAKER (-)

YELLOW - 12V (+)

BLACK - GROUNDRED - ACCESSORY (+)

BLUE/WHITE - AMP. TURN ON (+)

PURPLE - RR SPEAKER (+)

ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)

YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED

MAESTRO RR MODULE

MAINHARNESS

RCA CABLES

WIRES FROMVEHICLE

GMS05+ T-HARNESS

FACTORY RADIO HARNESS

SPEAKER

WHITE

OR

WHITE/BLACKGRAYGRAY/BLACKGREENGREEN/BLACK

PURPLE/BLACKPURPLE

STEP 1

STEP 2

STEP 3

STEP 4

SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS

LF SPEAKER

RF SPEAKER

LR SPEAKER

RR SPEAKER

BROWN - MUTE (-)

CONNECT TOAFTERMARKET RADIO

CONNECT TO RADIO WITH LOW LEVEL OUTPUT:

CONNECT TO RADIO WITH HIGH LEVEL OUTPUT:

WIRING DIAGRAM with an Amplifier

STEERING WHEELCONTROL CABLE

Page 7: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

buick enclave 2008-2014

Automotive Data Solutions Inc. © 2015 6

BACKUP CAMBACKUP CAM

CENTERCENTER

SUBSUB

B

C

A FG

C

AB

G

F

1B

E

E

STEP 1

BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)

MAINHARNESS

RCA CABLES

WIRES FROMVEHICLE

GMS05+ T-HARNESS

FACTORY RADIO HARNESS

(NOT CONNECTED)

(NOT CONNECTED)

WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)

PURPLE/BLACK - RR SPEAKER (-)

YELLOW - 12V (+)

BLACK - GROUNDRED - ACCESSORY (+)

BLUE/WHITE - AMP. TURN ON (+)

PURPLE - RR SPEAKER (+)

STEP 2

STEP 3

STEP 4

SPEAKER

MAESTRO RR MODULE

ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)

YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED

BROWN - MUTE (-)

CONNECT TOAFTERMARKET RADIO

SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS

WIRING DIAGRAM without an Amplifier

CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS

STEERING WHEELCONTROL CABLE

Page 8: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

OPTIONAL ACCESSORIESNone

PROGRAMMED FIRMWAREADS-RR(SR)-GMS05-AS

PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro GM5+ Installation Harness

INSTALL GUIDEBUICk LUCERNE

2006-2011Retains steeRing wheel contRols, onstaR, bluetooth and moRe!

NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.

Page 9: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

buick luceRne 2006-2011

Automotive Data Solutions Inc. © 2015 2

WELCOME

NEED hELP?

Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.

Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.

1 866 427-2999

[email protected]

maestro.idatalink.com/supportwww.12voltdata.com/forum

TABLE OF CONTENTS

Before Installing 3

Installation Instructions 4

Wiring Diagram with an Amplifi er 5

Wiring Diagram without an Amplifi er 6

Page 10: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

buick luceRne 2006-2011

Automotive Data Solutions Inc. © 2015 3

BEFORE INSTALLING STEP 1

DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:

METHOD 1: Look for the following logos in the vehicle. They are usually on the speaker covers or on the radio unit. If you fi nd any of the following logos Bose, Pioneer or Monsoon, you have a factory amplifi er.

METHOD 2: Look for the following sticker in the glove box. This sticker will indicate all the Regular Production Option (RPO) codes. If you fi nd any of the following codes UQA, UQS or UQG, you have a factory amplifi er.

STEP 2IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:

Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifi er and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits.

IF YOUR VEHICLE NOT IS EQUIPPED WITH A FACTORY AMPLIFIER:

Follow the installation instructions and complete the installation as shown in the wiring diagram without an amplifi er.

1

SERVICE PARTS IDENTIFICATION DO NOT REMOVE

AGI AG2 AJ1 AL0 AM7 AN3 AU0 AU3 A31 B30 B4UB58 B81 B82 CJ3 C49 C7H DF5 DK7 DL3 DT4 D07EVA E63 FF8 FF9 GT5 G80 JC4 KC4 KNP KUP K34K47 K68 LQ9 M32 NCI NEI NP3 NP5 OSG P30 QSSR4Y R9U R9Z SAF SLM TRB UC6 UK3 UQA U2K UFIUF3 UK3 VR4 VTV VXS V73 XSS X88 YD3 YD6 YE9YSS ZGC ZYI Z60 Z82 ISS ISZ 4IU 6YT 691 6927YT

BC/CC U 8555 692

143 5 FXWH2Q CKI57532GCEK19N031344764

Page 11: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

buick luceRne 2006-2011

Automotive Data Solutions Inc. © 2015 4

INSTALLATION INSTRUCTIONS STEP 1

• Unbox the aftermarket radio and locate its main harness.

• Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.

STEP 2

• Connect the factory harness to the GM5+ T-harness.

STEP 3• Plug the aftermarket radio harnesses into the aftermarket

radio.

• Plug the Data cable to the data port of the aftermarket radio.

• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.

STEP 4• Connect all the harnesses to the Maestro RR module then

proceed to module setup.

The module is now ready to be used.

Insert the aftermarket radio in the dashboard housing and test all the functionalities.

Reassemble the dashboard carefully.

AMPLIFIER ONLYDETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS

• If your vehicle is equipped with a factory amplifi er you can connect the RCA wiring to the low level outputs of your aftermarket radio, or connect the level matching circuits to the speaker outputs of the aftermarket radio.

• If your aftermarket radio does not have low level outputs, has only a single RCA output, or the RCA output level is 2 volts or less then it is recommended to connect the level matching circuit to the speaker outputs. If the volume does not go loud enough using the RCA connections, the level matching circuits can be used.

• The internal amplifi er in some radios is not compatible with the level matching circuit. In these cases, there will be fl oor noise (hissing or buzzing at low levels) when the level matching circuit is connected. Change to the RCA connections to eliminate this noise.

TROUBLESHOOTING TIPS:

• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.

• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”

1

Page 12: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

buick luceRne 2006-2011

Automotive Data Solutions Inc. © 2015 5

B

C

A FG

C

AB

G

F

CENTERCENTER

SUBSUB

BACKUP CAMBACKUP CAM

1A

E

E

BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)

WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)

PURPLE/BLACK - RR SPEAKER (-)

YELLOW - 12V (+)

BLACK - GROUNDRED - ACCESSORY (+)

BLUE/WHITE - AMP. TURN ON (+)

PURPLE - RR SPEAKER (+)

ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)

YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED

MAESTRO RR MODULE

MAINHARNESS

RCA CABLES

WIRES FROMVEHICLE

GMS05+ T-HARNESS

FACTORY RADIO HARNESS

SPEAKER

WHITE

OR

WHITE/BLACKGRAYGRAY/BLACKGREENGREEN/BLACK

PURPLE/BLACKPURPLE

STEP 1

STEP 2

STEP 3

STEP 4

SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS

LF SPEAKER

RF SPEAKER

LR SPEAKER

RR SPEAKER

BROWN - MUTE (-)

CONNECT TOAFTERMARKET RADIO

CONNECT TO RADIO WITH LOW LEVEL OUTPUT:

CONNECT TO RADIO WITH HIGH LEVEL OUTPUT:

WIRING DIAGRAM with an Amplifier

STEERING WHEELCONTROL CABLE

Page 13: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

buick luceRne 2006-2011

Automotive Data Solutions Inc. © 2015 6

BACKUP CAMBACKUP CAM

CENTERCENTER

SUBSUB

B

C

A FG

C

AB

G

F

1B

E

E

STEP 1

BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)

MAINHARNESS

RCA CABLES

WIRES FROMVEHICLE

GMS05+ T-HARNESS

FACTORY RADIO HARNESS

(NOT CONNECTED)

(NOT CONNECTED)

WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)

PURPLE/BLACK - RR SPEAKER (-)

YELLOW - 12V (+)

BLACK - GROUNDRED - ACCESSORY (+)

BLUE/WHITE - AMP. TURN ON (+)

PURPLE - RR SPEAKER (+)

STEP 2

STEP 3

STEP 4

SPEAKER

MAESTRO RR MODULE

ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)

YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED

BROWN - MUTE (-)

CONNECT TOAFTERMARKET RADIO

SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS

WIRING DIAGRAM without an Amplifier

CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS

STEERING WHEELCONTROL CABLE

Page 14: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

OPTIONAL ACCESSORIESNone

PROGRAMMED FIRMWAREADS-RR(SR)-GMS05-AS

PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro GM5+ Installation Harness

INSTALL GUIDECADILLAC DTS

2006-2011Retains steeRing wheel contRols, onstaR, bluetooth and moRe!

NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.

Page 15: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

cadillac dts 2006-2011

Automotive Data Solutions Inc. © 2015 2

WELCOME

NEED hELP?

Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.

Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.

1 866 427-2999

[email protected]

maestro.idatalink.com/supportwww.12voltdata.com/forum

TABLE OF CONTENTS

Before Installing 3

Installation Instructions 4

Wiring Diagram with an Amplifi er 5

Wiring Diagram without an Amplifi er 6

Page 16: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

cadillac dts 2006-2011

Automotive Data Solutions Inc. © 2015 3

BEFORE INSTALLING STEP 1

DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:

METHOD 1: Look for the following logos in the vehicle. They are usually on the speaker covers or on the radio unit. If you fi nd any of the following logos Bose, Pioneer or Monsoon, you have a factory amplifi er.

METHOD 2: Look for the following sticker in the glove box. This sticker will indicate all the Regular Production Option (RPO) codes. If you fi nd any of the following codes UQA, UQS or UQG, you have a factory amplifi er.

STEP 2IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:

Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifi er and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits.

IF YOUR VEHICLE NOT IS EQUIPPED WITH A FACTORY AMPLIFIER:

Follow the installation instructions and complete the installation as shown in the wiring diagram without an amplifi er.

1

SERVICE PARTS IDENTIFICATION DO NOT REMOVE

AGI AG2 AJ1 AL0 AM7 AN3 AU0 AU3 A31 B30 B4UB58 B81 B82 CJ3 C49 C7H DF5 DK7 DL3 DT4 D07EVA E63 FF8 FF9 GT5 G80 JC4 KC4 KNP KUP K34K47 K68 LQ9 M32 NCI NEI NP3 NP5 OSG P30 QSSR4Y R9U R9Z SAF SLM TRB UC6 UK3 UQA U2K UFIUF3 UK3 VR4 VTV VXS V73 XSS X88 YD3 YD6 YE9YSS ZGC ZYI Z60 Z82 ISS ISZ 4IU 6YT 691 6927YT

BC/CC U 8555 692

143 5 FXWH2Q CKI57532GCEK19N031344764

Page 17: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

cadillac dts 2006-2011

Automotive Data Solutions Inc. © 2015 4

INSTALLATION INSTRUCTIONS STEP 1

• Unbox the aftermarket radio and locate its main harness.

• Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.

STEP 2

• Connect the factory harness to the GM5+ T-harness.

STEP 3• Plug the aftermarket radio harnesses into the aftermarket

radio.

• Plug the Data cable to the data port of the aftermarket radio.

• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.

STEP 4• Connect all the harnesses to the Maestro RR module then

proceed to module setup.

The module is now ready to be used.

Insert the aftermarket radio in the dashboard housing and test all the functionalities.

Reassemble the dashboard carefully.

AMPLIFIER ONLYDETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS

• If your vehicle is equipped with a factory amplifi er you can connect the RCA wiring to the low level outputs of your aftermarket radio, or connect the level matching circuits to the speaker outputs of the aftermarket radio.

• If your aftermarket radio does not have low level outputs, has only a single RCA output, or the RCA output level is 2 volts or less then it is recommended to connect the level matching circuit to the speaker outputs. If the volume does not go loud enough using the RCA connections, the level matching circuits can be used.

• The internal amplifi er in some radios is not compatible with the level matching circuit. In these cases, there will be fl oor noise (hissing or buzzing at low levels) when the level matching circuit is connected. Change to the RCA connections to eliminate this noise.

TROUBLESHOOTING TIPS:

• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.

• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”

1

Page 18: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

cadillac dts 2006-2011

Automotive Data Solutions Inc. © 2015 5

B

C

A FG

C

AB

G

F

CENTERCENTER

SUBSUB

BACKUP CAMBACKUP CAM

1A

E

E

BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)

WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)

PURPLE/BLACK - RR SPEAKER (-)

YELLOW - 12V (+)

BLACK - GROUNDRED - ACCESSORY (+)

BLUE/WHITE - AMP. TURN ON (+)

PURPLE - RR SPEAKER (+)

ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)

YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED

MAESTRO RR MODULE

MAINHARNESS

RCA CABLES

WIRES FROMVEHICLE

GMS05+ T-HARNESS

FACTORY RADIO HARNESS

SPEAKER

WHITE

OR

WHITE/BLACKGRAYGRAY/BLACKGREENGREEN/BLACK

PURPLE/BLACKPURPLE

STEP 1

STEP 2

STEP 3

STEP 4

SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS

LF SPEAKER

RF SPEAKER

LR SPEAKER

RR SPEAKER

BROWN - MUTE (-)

CONNECT TOAFTERMARKET RADIO

CONNECT TO RADIO WITH LOW LEVEL OUTPUT:

CONNECT TO RADIO WITH HIGH LEVEL OUTPUT:

WIRING DIAGRAM with an Amplifier

STEERING WHEELCONTROL CABLE

Page 19: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

cadillac dts 2006-2011

Automotive Data Solutions Inc. © 2015 6

BACKUP CAMBACKUP CAM

CENTERCENTER

SUBSUB

B

C

A FG

C

AB

G

F

1B

E

E

STEP 1

BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)

MAINHARNESS

RCA CABLES

WIRES FROMVEHICLE

GMS05+ T-HARNESS

FACTORY RADIO HARNESS

(NOT CONNECTED)

(NOT CONNECTED)

WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)

PURPLE/BLACK - RR SPEAKER (-)

YELLOW - 12V (+)

BLACK - GROUNDRED - ACCESSORY (+)

BLUE/WHITE - AMP. TURN ON (+)

PURPLE - RR SPEAKER (+)

STEP 2

STEP 3

STEP 4

SPEAKER

MAESTRO RR MODULE

ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)

YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED

BROWN - MUTE (-)

CONNECT TOAFTERMARKET RADIO

SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS

WIRING DIAGRAM without an Amplifier

CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS

STEERING WHEELCONTROL CABLE

Page 20: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

OPTIONAL ACCESSORIESNone

PROGRAMMED FIRMWAREADS-RR(SR)-GMS05-AS

PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro GM5+ Installation Harness

INSTALL GUIDECADILLAC ESCALADE

2007-2011Retains steeRing wheel contRols, onstaR, bluetooth and moRe!

NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.

Page 21: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

cadillac escalade 2007-2011

Automotive Data Solutions Inc. © 2015 2

WELCOME

NEED hELP?

Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.

Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.

1 866 427-2999

[email protected]

maestro.idatalink.com/supportwww.12voltdata.com/forum

TABLE OF CONTENTS

Before Installing 3

Installation Instructions 4

Wiring Diagram with an Amplifi er 5

Wiring Diagram without an Amplifi er 6

Page 22: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

cadillac escalade 2007-2011

Automotive Data Solutions Inc. © 2015 3

BEFORE INSTALLING STEP 1

DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:

METHOD 1: Look for the following logos in the vehicle. They are usually on the speaker covers or on the radio unit. If you fi nd any of the following logos Bose, Pioneer or Monsoon, you have a factory amplifi er.

METHOD 2: Look for the following sticker in the glove box. This sticker will indicate all the Regular Production Option (RPO) codes. If you fi nd any of the following codes UQA, UQS or UQG, you have a factory amplifi er.

STEP 2IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:

Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifi er and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits.

IF YOUR VEHICLE NOT IS EQUIPPED WITH A FACTORY AMPLIFIER:

Follow the installation instructions and complete the installation as shown in the wiring diagram without an amplifi er.

1

SERVICE PARTS IDENTIFICATION DO NOT REMOVE

AGI AG2 AJ1 AL0 AM7 AN3 AU0 AU3 A31 B30 B4UB58 B81 B82 CJ3 C49 C7H DF5 DK7 DL3 DT4 D07EVA E63 FF8 FF9 GT5 G80 JC4 KC4 KNP KUP K34K47 K68 LQ9 M32 NCI NEI NP3 NP5 OSG P30 QSSR4Y R9U R9Z SAF SLM TRB UC6 UK3 UQA U2K UFIUF3 UK3 VR4 VTV VXS V73 XSS X88 YD3 YD6 YE9YSS ZGC ZYI Z60 Z82 ISS ISZ 4IU 6YT 691 6927YT

BC/CC U 8555 692

143 5 FXWH2Q CKI57532GCEK19N031344764

Page 23: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

cadillac escalade 2007-2011

Automotive Data Solutions Inc. © 2015 4

INSTALLATION INSTRUCTIONS STEP 1

• Unbox the aftermarket radio and locate its main harness.

• Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.

STEP 2

• Connect the factory harness to the GM5+ T-harness.

STEP 3• Plug the aftermarket radio harnesses into the aftermarket

radio.

• Plug the Data cable to the data port of the aftermarket radio.

• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.

STEP 4• Connect all the harnesses to the Maestro RR module then

proceed to module setup.

The module is now ready to be used.

Insert the aftermarket radio in the dashboard housing and test all the functionalities.

Reassemble the dashboard carefully.

AMPLIFIER ONLYDETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS

• If your vehicle is equipped with a factory amplifi er you can connect the RCA wiring to the low level outputs of your aftermarket radio, or connect the level matching circuits to the speaker outputs of the aftermarket radio.

• If your aftermarket radio does not have low level outputs, has only a single RCA output, or the RCA output level is 2 volts or less then it is recommended to connect the level matching circuit to the speaker outputs. If the volume does not go loud enough using the RCA connections, the level matching circuits can be used.

• The internal amplifi er in some radios is not compatible with the level matching circuit. In these cases, there will be fl oor noise (hissing or buzzing at low levels) when the level matching circuit is connected. Change to the RCA connections to eliminate this noise.

TROUBLESHOOTING TIPS:

• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.

• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”

1

Page 24: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

cadillac escalade 2007-2011

Automotive Data Solutions Inc. © 2015 5

B

C

A FG

C

AB

G

F

CENTERCENTER

SUBSUB

BACKUP CAMBACKUP CAM

1A

E

E

BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)

WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)

PURPLE/BLACK - RR SPEAKER (-)

YELLOW - 12V (+)

BLACK - GROUNDRED - ACCESSORY (+)

BLUE/WHITE - AMP. TURN ON (+)

PURPLE - RR SPEAKER (+)

ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)

YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED

MAESTRO RR MODULE

MAINHARNESS

RCA CABLES

WIRES FROMVEHICLE

GMS05+ T-HARNESS

FACTORY RADIO HARNESS

SPEAKER

WHITE

OR

WHITE/BLACKGRAYGRAY/BLACKGREENGREEN/BLACK

PURPLE/BLACKPURPLE

STEP 1

STEP 2

STEP 3

STEP 4

SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS

LF SPEAKER

RF SPEAKER

LR SPEAKER

RR SPEAKER

BROWN - MUTE (-)

CONNECT TOAFTERMARKET RADIO

CONNECT TO RADIO WITH LOW LEVEL OUTPUT:

CONNECT TO RADIO WITH HIGH LEVEL OUTPUT:

WIRING DIAGRAM with an Amplifier

STEERING WHEELCONTROL CABLE

Page 25: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

cadillac escalade 2007-2011

Automotive Data Solutions Inc. © 2015 6

BACKUP CAMBACKUP CAM

CENTERCENTER

SUBSUB

B

C

A FG

C

AB

G

F

1B

E

E

STEP 1

BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)

MAINHARNESS

RCA CABLES

WIRES FROMVEHICLE

GMS05+ T-HARNESS

FACTORY RADIO HARNESS

(NOT CONNECTED)

(NOT CONNECTED)

WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)

PURPLE/BLACK - RR SPEAKER (-)

YELLOW - 12V (+)

BLACK - GROUNDRED - ACCESSORY (+)

BLUE/WHITE - AMP. TURN ON (+)

PURPLE - RR SPEAKER (+)

STEP 2

STEP 3

STEP 4

SPEAKER

MAESTRO RR MODULE

ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)

YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED

BROWN - MUTE (-)

CONNECT TOAFTERMARKET RADIO

SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS

WIRING DIAGRAM without an Amplifier

CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS

STEERING WHEELCONTROL CABLE

Page 26: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

OPTIONAL ACCESSORIESNone

PROGRAMMED FIRMWAREADS-RR(SR)-GMS05-AS

PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro GM5+ Installation Harness

INSTALL GUIDECADILLAC ESCALADE

WIThOUT NAv 2012-2014Retains steeRing wheel contRols, onstaR, bluetooth and moRe!

NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.

Page 27: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

cadillac escalade without nav 2012-2014

Automotive Data Solutions Inc. © 2015 2

WELCOME

NEED hELP?

Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.

Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.

1 866 427-2999

[email protected]

maestro.idatalink.com/supportwww.12voltdata.com/forum

TABLE OF CONTENTS

Before Installing 3

Installation Instructions 4

Wiring Diagram with an Amplifi er 5

Wiring Diagram without an Amplifi er 6

Page 28: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

cadillac escalade without nav 2012-2014

Automotive Data Solutions Inc. © 2015 3

BEFORE INSTALLING STEP 1

DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:

METHOD 1: Look for the following logos in the vehicle. They are usually on the speaker covers or on the radio unit. If you fi nd any of the following logos Bose, Pioneer or Monsoon, you have a factory amplifi er.

METHOD 2: Look for the following sticker in the glove box. This sticker will indicate all the Regular Production Option (RPO) codes. If you fi nd any of the following codes UQA, UQS or UQG, you have a factory amplifi er.

STEP 2IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:

Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifi er and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits.

IF YOUR VEHICLE NOT IS EQUIPPED WITH A FACTORY AMPLIFIER:

Follow the installation instructions and complete the installation as shown in the wiring diagram without an amplifi er.

1

SERVICE PARTS IDENTIFICATION DO NOT REMOVE

AGI AG2 AJ1 AL0 AM7 AN3 AU0 AU3 A31 B30 B4UB58 B81 B82 CJ3 C49 C7H DF5 DK7 DL3 DT4 D07EVA E63 FF8 FF9 GT5 G80 JC4 KC4 KNP KUP K34K47 K68 LQ9 M32 NCI NEI NP3 NP5 OSG P30 QSSR4Y R9U R9Z SAF SLM TRB UC6 UK3 UQA U2K UFIUF3 UK3 VR4 VTV VXS V73 XSS X88 YD3 YD6 YE9YSS ZGC ZYI Z60 Z82 ISS ISZ 4IU 6YT 691 6927YT

BC/CC U 8555 692

143 5 FXWH2Q CKI57532GCEK19N031344764

Page 29: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

cadillac escalade without nav 2012-2014

Automotive Data Solutions Inc. © 2015 4

INSTALLATION INSTRUCTIONS STEP 1

• Unbox the aftermarket radio and locate its main harness.

• Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.

STEP 2

• Connect the factory harness to the GM5+ T-harness.

STEP 3• Plug the aftermarket radio harnesses into the aftermarket

radio.

• Plug the Data cable to the data port of the aftermarket radio.

• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.

STEP 4• Connect all the harnesses to the Maestro RR module then

proceed to module setup.

The module is now ready to be used.

Insert the aftermarket radio in the dashboard housing and test all the functionalities.

Reassemble the dashboard carefully.

AMPLIFIER ONLYDETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS

• If your vehicle is equipped with a factory amplifi er you can connect the RCA wiring to the low level outputs of your aftermarket radio, or connect the level matching circuits to the speaker outputs of the aftermarket radio.

• If your aftermarket radio does not have low level outputs, has only a single RCA output, or the RCA output level is 2 volts or less then it is recommended to connect the level matching circuit to the speaker outputs. If the volume does not go loud enough using the RCA connections, the level matching circuits can be used.

• The internal amplifi er in some radios is not compatible with the level matching circuit. In these cases, there will be fl oor noise (hissing or buzzing at low levels) when the level matching circuit is connected. Change to the RCA connections to eliminate this noise.

TROUBLESHOOTING TIPS:

• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.

• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”

1

Page 30: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

cadillac escalade without nav 2012-2014

Automotive Data Solutions Inc. © 2015 5

B

C

A FG

C

AB

G

F

CENTERCENTER

SUBSUB

BACKUP CAMBACKUP CAM

1A

E

E

BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)

WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)

PURPLE/BLACK - RR SPEAKER (-)

YELLOW - 12V (+)

BLACK - GROUNDRED - ACCESSORY (+)

BLUE/WHITE - AMP. TURN ON (+)

PURPLE - RR SPEAKER (+)

ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)

YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED

MAESTRO RR MODULE

MAINHARNESS

RCA CABLES

WIRES FROMVEHICLE

GMS05+ T-HARNESS

FACTORY RADIO HARNESS

SPEAKER

WHITE

OR

WHITE/BLACKGRAYGRAY/BLACKGREENGREEN/BLACK

PURPLE/BLACKPURPLE

STEP 1

STEP 2

STEP 3

STEP 4

SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS

LF SPEAKER

RF SPEAKER

LR SPEAKER

RR SPEAKER

BROWN - MUTE (-)

CONNECT TOAFTERMARKET RADIO

CONNECT TO RADIO WITH LOW LEVEL OUTPUT:

CONNECT TO RADIO WITH HIGH LEVEL OUTPUT:

WIRING DIAGRAM with an Amplifier

STEERING WHEELCONTROL CABLE

Page 31: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

cadillac escalade without nav 2012-2014

Automotive Data Solutions Inc. © 2015 6

BACKUP CAMBACKUP CAM

CENTERCENTER

SUBSUB

B

C

A FG

C

AB

G

F

1B

E

E

STEP 1

BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)

MAINHARNESS

RCA CABLES

WIRES FROMVEHICLE

GMS05+ T-HARNESS

FACTORY RADIO HARNESS

(NOT CONNECTED)

(NOT CONNECTED)

WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)

PURPLE/BLACK - RR SPEAKER (-)

YELLOW - 12V (+)

BLACK - GROUNDRED - ACCESSORY (+)

BLUE/WHITE - AMP. TURN ON (+)

PURPLE - RR SPEAKER (+)

STEP 2

STEP 3

STEP 4

SPEAKER

MAESTRO RR MODULE

ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)

YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED

BROWN - MUTE (-)

CONNECT TOAFTERMARKET RADIO

SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS

WIRING DIAGRAM without an Amplifier

CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS

STEERING WHEELCONTROL CABLE

Page 32: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

OPTIONAL ACCESSORIESNone

PROGRAMMED FIRMWAREADS-RR(SR)-GMS05-AS

PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro GM5+ Installation Harness

INSTALL GUIDEChEvROLET AvALANChE

2007-2011Retains steeRing wheel contRols, onstaR, bluetooth and moRe!

NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.

Page 33: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

chevRolet avalanche 2007-2011

Automotive Data Solutions Inc. © 2015 2

WELCOME

NEED hELP?

Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.

Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.

1 866 427-2999

[email protected]

maestro.idatalink.com/supportwww.12voltdata.com/forum

TABLE OF CONTENTS

Before Installing 3

Installation Instructions 4

Wiring Diagram with an Amplifi er 5

Wiring Diagram without an Amplifi er 6

Page 34: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

chevRolet avalanche 2007-2011

Automotive Data Solutions Inc. © 2015 3

BEFORE INSTALLING STEP 1

DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:

METHOD 1: Look for the following logos in the vehicle. They are usually on the speaker covers or on the radio unit. If you fi nd any of the following logos Bose, Pioneer or Monsoon, you have a factory amplifi er.

METHOD 2: Look for the following sticker in the glove box. This sticker will indicate all the Regular Production Option (RPO) codes. If you fi nd any of the following codes UQA, UQS or UQG, you have a factory amplifi er.

STEP 2IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:

Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifi er and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits.

IF YOUR VEHICLE NOT IS EQUIPPED WITH A FACTORY AMPLIFIER:

Follow the installation instructions and complete the installation as shown in the wiring diagram without an amplifi er.

1

SERVICE PARTS IDENTIFICATION DO NOT REMOVE

AGI AG2 AJ1 AL0 AM7 AN3 AU0 AU3 A31 B30 B4UB58 B81 B82 CJ3 C49 C7H DF5 DK7 DL3 DT4 D07EVA E63 FF8 FF9 GT5 G80 JC4 KC4 KNP KUP K34K47 K68 LQ9 M32 NCI NEI NP3 NP5 OSG P30 QSSR4Y R9U R9Z SAF SLM TRB UC6 UK3 UQA U2K UFIUF3 UK3 VR4 VTV VXS V73 XSS X88 YD3 YD6 YE9YSS ZGC ZYI Z60 Z82 ISS ISZ 4IU 6YT 691 6927YT

BC/CC U 8555 692

143 5 FXWH2Q CKI57532GCEK19N031344764

Page 35: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

chevRolet avalanche 2007-2011

Automotive Data Solutions Inc. © 2015 4

INSTALLATION INSTRUCTIONS STEP 1

• Unbox the aftermarket radio and locate its main harness.

• Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.

STEP 2

• Connect the factory harness to the GM5+ T-harness.

STEP 3• Plug the aftermarket radio harnesses into the aftermarket

radio.

• Plug the Data cable to the data port of the aftermarket radio.

• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.

STEP 4• Connect all the harnesses to the Maestro RR module then

proceed to module setup.

The module is now ready to be used.

Insert the aftermarket radio in the dashboard housing and test all the functionalities.

Reassemble the dashboard carefully.

AMPLIFIER ONLYDETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS

• If your vehicle is equipped with a factory amplifi er you can connect the RCA wiring to the low level outputs of your aftermarket radio, or connect the level matching circuits to the speaker outputs of the aftermarket radio.

• If your aftermarket radio does not have low level outputs, has only a single RCA output, or the RCA output level is 2 volts or less then it is recommended to connect the level matching circuit to the speaker outputs. If the volume does not go loud enough using the RCA connections, the level matching circuits can be used.

• The internal amplifi er in some radios is not compatible with the level matching circuit. In these cases, there will be fl oor noise (hissing or buzzing at low levels) when the level matching circuit is connected. Change to the RCA connections to eliminate this noise.

TROUBLESHOOTING TIPS:

• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.

• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”

1

Page 36: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

chevRolet avalanche 2007-2011

Automotive Data Solutions Inc. © 2015 5

B

C

A FG

C

AB

G

F

CENTERCENTER

SUBSUB

BACKUP CAMBACKUP CAM

1A

E

E

BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)

WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)

PURPLE/BLACK - RR SPEAKER (-)

YELLOW - 12V (+)

BLACK - GROUNDRED - ACCESSORY (+)

BLUE/WHITE - AMP. TURN ON (+)

PURPLE - RR SPEAKER (+)

ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)

YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED

MAESTRO RR MODULE

MAINHARNESS

RCA CABLES

WIRES FROMVEHICLE

GMS05+ T-HARNESS

FACTORY RADIO HARNESS

SPEAKER

WHITE

OR

WHITE/BLACKGRAYGRAY/BLACKGREENGREEN/BLACK

PURPLE/BLACKPURPLE

STEP 1

STEP 2

STEP 3

STEP 4

SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS

LF SPEAKER

RF SPEAKER

LR SPEAKER

RR SPEAKER

BROWN - MUTE (-)

CONNECT TOAFTERMARKET RADIO

CONNECT TO RADIO WITH LOW LEVEL OUTPUT:

CONNECT TO RADIO WITH HIGH LEVEL OUTPUT:

WIRING DIAGRAM with an Amplifier

STEERING WHEELCONTROL CABLE

Page 37: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

chevRolet avalanche 2007-2011

Automotive Data Solutions Inc. © 2015 6

BACKUP CAMBACKUP CAM

CENTERCENTER

SUBSUB

B

C

A FG

C

AB

G

F

1B

E

E

STEP 1

BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)

MAINHARNESS

RCA CABLES

WIRES FROMVEHICLE

GMS05+ T-HARNESS

FACTORY RADIO HARNESS

(NOT CONNECTED)

(NOT CONNECTED)

WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)

PURPLE/BLACK - RR SPEAKER (-)

YELLOW - 12V (+)

BLACK - GROUNDRED - ACCESSORY (+)

BLUE/WHITE - AMP. TURN ON (+)

PURPLE - RR SPEAKER (+)

STEP 2

STEP 3

STEP 4

SPEAKER

MAESTRO RR MODULE

ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)

YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED

BROWN - MUTE (-)

CONNECT TOAFTERMARKET RADIO

SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS

WIRING DIAGRAM without an Amplifier

CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS

STEERING WHEELCONTROL CABLE

Page 38: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

OPTIONAL ACCESSORIESNone

PROGRAMMED FIRMWAREADS-RR(SR)-GMS05-AS

PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro GM5+ Installation Harness

INSTALL GUIDEChEvROLET AvALANChEWIThOUT NAv 2012-2013

Retains steeRing wheel contRols, onstaR, bluetooth and moRe!

NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.

Page 39: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

chevRolet avalanche without nav 2012-2013

Automotive Data Solutions Inc. © 2015 2

WELCOME

NEED hELP?

Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.

Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.

1 866 427-2999

[email protected]

maestro.idatalink.com/supportwww.12voltdata.com/forum

TABLE OF CONTENTS

Before Installing 3

Installation Instructions 4

Wiring Diagram with an Amplifi er 5

Wiring Diagram without an Amplifi er 6

Page 40: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

chevRolet avalanche without nav 2012-2013

Automotive Data Solutions Inc. © 2015 3

BEFORE INSTALLING STEP 1

DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:

METHOD 1: Look for the following logos in the vehicle. They are usually on the speaker covers or on the radio unit. If you fi nd any of the following logos Bose, Pioneer or Monsoon, you have a factory amplifi er.

METHOD 2: Look for the following sticker in the glove box. This sticker will indicate all the Regular Production Option (RPO) codes. If you fi nd any of the following codes UQA, UQS or UQG, you have a factory amplifi er.

STEP 2IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:

Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifi er and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits.

IF YOUR VEHICLE NOT IS EQUIPPED WITH A FACTORY AMPLIFIER:

Follow the installation instructions and complete the installation as shown in the wiring diagram without an amplifi er.

1

SERVICE PARTS IDENTIFICATION DO NOT REMOVE

AGI AG2 AJ1 AL0 AM7 AN3 AU0 AU3 A31 B30 B4UB58 B81 B82 CJ3 C49 C7H DF5 DK7 DL3 DT4 D07EVA E63 FF8 FF9 GT5 G80 JC4 KC4 KNP KUP K34K47 K68 LQ9 M32 NCI NEI NP3 NP5 OSG P30 QSSR4Y R9U R9Z SAF SLM TRB UC6 UK3 UQA U2K UFIUF3 UK3 VR4 VTV VXS V73 XSS X88 YD3 YD6 YE9YSS ZGC ZYI Z60 Z82 ISS ISZ 4IU 6YT 691 6927YT

BC/CC U 8555 692

143 5 FXWH2Q CKI57532GCEK19N031344764

Page 41: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

chevRolet avalanche without nav 2012-2013

Automotive Data Solutions Inc. © 2015 4

INSTALLATION INSTRUCTIONS STEP 1

• Unbox the aftermarket radio and locate its main harness.

• Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.

STEP 2

• Connect the factory harness to the GM5+ T-harness.

STEP 3• Plug the aftermarket radio harnesses into the aftermarket

radio.

• Plug the Data cable to the data port of the aftermarket radio.

• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.

STEP 4• Connect all the harnesses to the Maestro RR module then

proceed to module setup.

The module is now ready to be used.

Insert the aftermarket radio in the dashboard housing and test all the functionalities.

Reassemble the dashboard carefully.

AMPLIFIER ONLYDETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS

• If your vehicle is equipped with a factory amplifi er you can connect the RCA wiring to the low level outputs of your aftermarket radio, or connect the level matching circuits to the speaker outputs of the aftermarket radio.

• If your aftermarket radio does not have low level outputs, has only a single RCA output, or the RCA output level is 2 volts or less then it is recommended to connect the level matching circuit to the speaker outputs. If the volume does not go loud enough using the RCA connections, the level matching circuits can be used.

• The internal amplifi er in some radios is not compatible with the level matching circuit. In these cases, there will be fl oor noise (hissing or buzzing at low levels) when the level matching circuit is connected. Change to the RCA connections to eliminate this noise.

TROUBLESHOOTING TIPS:

• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.

• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”

1

Page 42: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

chevRolet avalanche without nav 2012-2013

Automotive Data Solutions Inc. © 2015 5

B

C

A FG

C

AB

G

F

CENTERCENTER

SUBSUB

BACKUP CAMBACKUP CAM

1A

E

E

BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)

WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)

PURPLE/BLACK - RR SPEAKER (-)

YELLOW - 12V (+)

BLACK - GROUNDRED - ACCESSORY (+)

BLUE/WHITE - AMP. TURN ON (+)

PURPLE - RR SPEAKER (+)

ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)

YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED

MAESTRO RR MODULE

MAINHARNESS

RCA CABLES

WIRES FROMVEHICLE

GMS05+ T-HARNESS

FACTORY RADIO HARNESS

SPEAKER

WHITE

OR

WHITE/BLACKGRAYGRAY/BLACKGREENGREEN/BLACK

PURPLE/BLACKPURPLE

STEP 1

STEP 2

STEP 3

STEP 4

SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS

LF SPEAKER

RF SPEAKER

LR SPEAKER

RR SPEAKER

BROWN - MUTE (-)

CONNECT TOAFTERMARKET RADIO

CONNECT TO RADIO WITH LOW LEVEL OUTPUT:

CONNECT TO RADIO WITH HIGH LEVEL OUTPUT:

WIRING DIAGRAM with an Amplifier

STEERING WHEELCONTROL CABLE

Page 43: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

chevRolet avalanche without nav 2012-2013

Automotive Data Solutions Inc. © 2015 6

BACKUP CAMBACKUP CAM

CENTERCENTER

SUBSUB

B

C

A FG

C

AB

G

F

1B

E

E

STEP 1

BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)

MAINHARNESS

RCA CABLES

WIRES FROMVEHICLE

GMS05+ T-HARNESS

FACTORY RADIO HARNESS

(NOT CONNECTED)

(NOT CONNECTED)

WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)

PURPLE/BLACK - RR SPEAKER (-)

YELLOW - 12V (+)

BLACK - GROUNDRED - ACCESSORY (+)

BLUE/WHITE - AMP. TURN ON (+)

PURPLE - RR SPEAKER (+)

STEP 2

STEP 3

STEP 4

SPEAKER

MAESTRO RR MODULE

ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)

YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED

BROWN - MUTE (-)

CONNECT TOAFTERMARKET RADIO

SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS

WIRING DIAGRAM without an Amplifier

CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS

STEERING WHEELCONTROL CABLE

Page 44: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

OPTIONAL ACCESSORIESNone

PROGRAMMED FIRMWAREADS-RR(SR)-GMS05-AS

PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro GM5+ Installation Harness

INSTALL GUIDEChEvROLET EQUINOx

2007-2009Retains steeRing wheel contRols, onstaR, bluetooth and moRe!

NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.

Page 45: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

chevRolet equinox 2007-2009

Automotive Data Solutions Inc. © 2015 2

WELCOME

NEED hELP?

Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.

Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.

1 866 427-2999

[email protected]

maestro.idatalink.com/supportwww.12voltdata.com/forum

TABLE OF CONTENTS

Before Installing 3

Installation Instructions 4

Wiring Diagram with an Amplifi er 5

Wiring Diagram without an Amplifi er 6

Page 46: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

chevRolet equinox 2007-2009

Automotive Data Solutions Inc. © 2015 3

BEFORE INSTALLING STEP 1

DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:

METHOD 1: Look for the following logos in the vehicle. They are usually on the speaker covers or on the radio unit. If you fi nd any of the following logos Bose, Pioneer or Monsoon, you have a factory amplifi er.

METHOD 2: Look for the following sticker in the glove box. This sticker will indicate all the Regular Production Option (RPO) codes. If you fi nd any of the following codes UQA, UQS or UQG, you have a factory amplifi er.

STEP 2IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:

Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifi er and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits.

IF YOUR VEHICLE NOT IS EQUIPPED WITH A FACTORY AMPLIFIER:

Follow the installation instructions and complete the installation as shown in the wiring diagram without an amplifi er.

1

SERVICE PARTS IDENTIFICATION DO NOT REMOVE

AGI AG2 AJ1 AL0 AM7 AN3 AU0 AU3 A31 B30 B4UB58 B81 B82 CJ3 C49 C7H DF5 DK7 DL3 DT4 D07EVA E63 FF8 FF9 GT5 G80 JC4 KC4 KNP KUP K34K47 K68 LQ9 M32 NCI NEI NP3 NP5 OSG P30 QSSR4Y R9U R9Z SAF SLM TRB UC6 UK3 UQA U2K UFIUF3 UK3 VR4 VTV VXS V73 XSS X88 YD3 YD6 YE9YSS ZGC ZYI Z60 Z82 ISS ISZ 4IU 6YT 691 6927YT

BC/CC U 8555 692

143 5 FXWH2Q CKI57532GCEK19N031344764

Page 47: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

chevRolet equinox 2007-2009

Automotive Data Solutions Inc. © 2015 4

INSTALLATION INSTRUCTIONS STEP 1

• Unbox the aftermarket radio and locate its main harness.

• Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.

STEP 2

• Connect the factory harness to the GM5+ T-harness.

STEP 3• Plug the aftermarket radio harnesses into the aftermarket

radio.

• Plug the Data cable to the data port of the aftermarket radio.

• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.

STEP 4• Connect all the harnesses to the Maestro RR module then

proceed to module setup.

The module is now ready to be used.

Insert the aftermarket radio in the dashboard housing and test all the functionalities.

Reassemble the dashboard carefully.

AMPLIFIER ONLYDETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS

• If your vehicle is equipped with a factory amplifi er you can connect the RCA wiring to the low level outputs of your aftermarket radio, or connect the level matching circuits to the speaker outputs of the aftermarket radio.

• If your aftermarket radio does not have low level outputs, has only a single RCA output, or the RCA output level is 2 volts or less then it is recommended to connect the level matching circuit to the speaker outputs. If the volume does not go loud enough using the RCA connections, the level matching circuits can be used.

• The internal amplifi er in some radios is not compatible with the level matching circuit. In these cases, there will be fl oor noise (hissing or buzzing at low levels) when the level matching circuit is connected. Change to the RCA connections to eliminate this noise.

TROUBLESHOOTING TIPS:

• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.

• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”

1

Page 48: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

chevRolet equinox 2007-2009

Automotive Data Solutions Inc. © 2015 5

B

C

A FG

C

AB

G

F

CENTERCENTER

SUBSUB

BACKUP CAMBACKUP CAM

1A

E

E

BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)

WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)

PURPLE/BLACK - RR SPEAKER (-)

YELLOW - 12V (+)

BLACK - GROUNDRED - ACCESSORY (+)

BLUE/WHITE - AMP. TURN ON (+)

PURPLE - RR SPEAKER (+)

ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)

YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED

MAESTRO RR MODULE

MAINHARNESS

RCA CABLES

WIRES FROMVEHICLE

GMS05+ T-HARNESS

FACTORY RADIO HARNESS

SPEAKER

WHITE

OR

WHITE/BLACKGRAYGRAY/BLACKGREENGREEN/BLACK

PURPLE/BLACKPURPLE

STEP 1

STEP 2

STEP 3

STEP 4

SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS

LF SPEAKER

RF SPEAKER

LR SPEAKER

RR SPEAKER

BROWN - MUTE (-)

CONNECT TOAFTERMARKET RADIO

CONNECT TO RADIO WITH LOW LEVEL OUTPUT:

CONNECT TO RADIO WITH HIGH LEVEL OUTPUT:

WIRING DIAGRAM with an Amplifier

STEERING WHEELCONTROL CABLE

Page 49: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

chevRolet equinox 2007-2009

Automotive Data Solutions Inc. © 2015 6

BACKUP CAMBACKUP CAM

CENTERCENTER

SUBSUB

B

C

A FG

C

AB

G

F

1B

E

E

STEP 1

BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)

MAINHARNESS

RCA CABLES

WIRES FROMVEHICLE

GMS05+ T-HARNESS

FACTORY RADIO HARNESS

(NOT CONNECTED)

(NOT CONNECTED)

WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)

PURPLE/BLACK - RR SPEAKER (-)

YELLOW - 12V (+)

BLACK - GROUNDRED - ACCESSORY (+)

BLUE/WHITE - AMP. TURN ON (+)

PURPLE - RR SPEAKER (+)

STEP 2

STEP 3

STEP 4

SPEAKER

MAESTRO RR MODULE

ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)

YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED

BROWN - MUTE (-)

CONNECT TOAFTERMARKET RADIO

SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS

WIRING DIAGRAM without an Amplifier

CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS

STEERING WHEELCONTROL CABLE

Page 50: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

OPTIONAL ACCESSORIESNone

PROGRAMMED FIRMWAREADS-RR(SR)-GMS05-AS

PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro GM5+ Installation Harness

INSTALL GUIDEChEvROLET ExPRESS

2008-2014Retains steeRing wheel contRols, onstaR, bluetooth and moRe!

NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.

Page 51: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

chevRolet expRess 2008-2014

Automotive Data Solutions Inc. © 2015 2

WELCOME

NEED hELP?

Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.

Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.

1 866 427-2999

[email protected]

maestro.idatalink.com/supportwww.12voltdata.com/forum

TABLE OF CONTENTS

Before Installing 3

Installation Instructions 4

Wiring Diagram with an Amplifi er 5

Wiring Diagram without an Amplifi er 6

Page 52: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

chevRolet expRess 2008-2014

Automotive Data Solutions Inc. © 2015 3

BEFORE INSTALLING STEP 1

DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:

METHOD 1: Look for the following logos in the vehicle. They are usually on the speaker covers or on the radio unit. If you fi nd any of the following logos Bose, Pioneer or Monsoon, you have a factory amplifi er.

METHOD 2: Look for the following sticker in the glove box. This sticker will indicate all the Regular Production Option (RPO) codes. If you fi nd any of the following codes UQA, UQS or UQG, you have a factory amplifi er.

STEP 2IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:

Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifi er and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits.

IF YOUR VEHICLE NOT IS EQUIPPED WITH A FACTORY AMPLIFIER:

Follow the installation instructions and complete the installation as shown in the wiring diagram without an amplifi er.

1

SERVICE PARTS IDENTIFICATION DO NOT REMOVE

AGI AG2 AJ1 AL0 AM7 AN3 AU0 AU3 A31 B30 B4UB58 B81 B82 CJ3 C49 C7H DF5 DK7 DL3 DT4 D07EVA E63 FF8 FF9 GT5 G80 JC4 KC4 KNP KUP K34K47 K68 LQ9 M32 NCI NEI NP3 NP5 OSG P30 QSSR4Y R9U R9Z SAF SLM TRB UC6 UK3 UQA U2K UFIUF3 UK3 VR4 VTV VXS V73 XSS X88 YD3 YD6 YE9YSS ZGC ZYI Z60 Z82 ISS ISZ 4IU 6YT 691 6927YT

BC/CC U 8555 692

143 5 FXWH2Q CKI57532GCEK19N031344764

Page 53: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

chevRolet expRess 2008-2014

Automotive Data Solutions Inc. © 2015 4

INSTALLATION INSTRUCTIONS STEP 1

• Unbox the aftermarket radio and locate its main harness.

• Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.

STEP 2

• Connect the factory harness to the GM5+ T-harness.

STEP 3• Plug the aftermarket radio harnesses into the aftermarket

radio.

• Plug the Data cable to the data port of the aftermarket radio.

• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.

STEP 4• Connect all the harnesses to the Maestro RR module then

proceed to module setup.

The module is now ready to be used.

Insert the aftermarket radio in the dashboard housing and test all the functionalities.

Reassemble the dashboard carefully.

AMPLIFIER ONLYDETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS

• If your vehicle is equipped with a factory amplifi er you can connect the RCA wiring to the low level outputs of your aftermarket radio, or connect the level matching circuits to the speaker outputs of the aftermarket radio.

• If your aftermarket radio does not have low level outputs, has only a single RCA output, or the RCA output level is 2 volts or less then it is recommended to connect the level matching circuit to the speaker outputs. If the volume does not go loud enough using the RCA connections, the level matching circuits can be used.

• The internal amplifi er in some radios is not compatible with the level matching circuit. In these cases, there will be fl oor noise (hissing or buzzing at low levels) when the level matching circuit is connected. Change to the RCA connections to eliminate this noise.

TROUBLESHOOTING TIPS:

• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.

• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”

1

Page 54: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

chevRolet expRess 2008-2014

Automotive Data Solutions Inc. © 2015 5

B

C

A FG

C

AB

G

F

CENTERCENTER

SUBSUB

BACKUP CAMBACKUP CAM

1A

E

E

BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)

WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)

PURPLE/BLACK - RR SPEAKER (-)

YELLOW - 12V (+)

BLACK - GROUNDRED - ACCESSORY (+)

BLUE/WHITE - AMP. TURN ON (+)

PURPLE - RR SPEAKER (+)

ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)

YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED

MAESTRO RR MODULE

MAINHARNESS

RCA CABLES

WIRES FROMVEHICLE

GMS05+ T-HARNESS

FACTORY RADIO HARNESS

SPEAKER

WHITE

OR

WHITE/BLACKGRAYGRAY/BLACKGREENGREEN/BLACK

PURPLE/BLACKPURPLE

STEP 1

STEP 2

STEP 3

STEP 4

SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS

LF SPEAKER

RF SPEAKER

LR SPEAKER

RR SPEAKER

BROWN - MUTE (-)

CONNECT TOAFTERMARKET RADIO

CONNECT TO RADIO WITH LOW LEVEL OUTPUT:

CONNECT TO RADIO WITH HIGH LEVEL OUTPUT:

WIRING DIAGRAM with an Amplifier

STEERING WHEELCONTROL CABLE

Page 55: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

chevRolet expRess 2008-2014

Automotive Data Solutions Inc. © 2015 6

BACKUP CAMBACKUP CAM

CENTERCENTER

SUBSUB

B

C

A FG

C

AB

G

F

1B

E

E

STEP 1

BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)

MAINHARNESS

RCA CABLES

WIRES FROMVEHICLE

GMS05+ T-HARNESS

FACTORY RADIO HARNESS

(NOT CONNECTED)

(NOT CONNECTED)

WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)

PURPLE/BLACK - RR SPEAKER (-)

YELLOW - 12V (+)

BLACK - GROUNDRED - ACCESSORY (+)

BLUE/WHITE - AMP. TURN ON (+)

PURPLE - RR SPEAKER (+)

STEP 2

STEP 3

STEP 4

SPEAKER

MAESTRO RR MODULE

ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)

YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED

BROWN - MUTE (-)

CONNECT TOAFTERMARKET RADIO

SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS

WIRING DIAGRAM without an Amplifier

CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS

STEERING WHEELCONTROL CABLE

Page 56: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

OPTIONAL ACCESSORIESNone

PROGRAMMED FIRMWAREADS-RR(SR)-GMS05-AS

PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro GM5+ Installation Harness

INSTALL GUIDEChEvROLET IMPALA

2006-2013Retains steeRing wheel contRols, onstaR, bluetooth and moRe!

NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.

Page 57: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

chevRolet impala 2006-2013

Automotive Data Solutions Inc. © 2015 2

WELCOME

NEED hELP?

Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.

Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.

1 866 427-2999

[email protected]

maestro.idatalink.com/supportwww.12voltdata.com/forum

TABLE OF CONTENTS

Before Installing 3

Installation Instructions 4

Wiring Diagram with an Amplifi er 5

Wiring Diagram without an Amplifi er 6

Page 58: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

chevRolet impala 2006-2013

Automotive Data Solutions Inc. © 2015 3

BEFORE INSTALLING STEP 1

DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:

METHOD 1: Look for the following logos in the vehicle. They are usually on the speaker covers or on the radio unit. If you fi nd any of the following logos Bose, Pioneer or Monsoon, you have a factory amplifi er.

METHOD 2: Look for the following sticker in the glove box. This sticker will indicate all the Regular Production Option (RPO) codes. If you fi nd any of the following codes UQA, UQS or UQG, you have a factory amplifi er.

STEP 2IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:

Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifi er and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits.

IF YOUR VEHICLE NOT IS EQUIPPED WITH A FACTORY AMPLIFIER:

Follow the installation instructions and complete the installation as shown in the wiring diagram without an amplifi er.

1

SERVICE PARTS IDENTIFICATION DO NOT REMOVE

AGI AG2 AJ1 AL0 AM7 AN3 AU0 AU3 A31 B30 B4UB58 B81 B82 CJ3 C49 C7H DF5 DK7 DL3 DT4 D07EVA E63 FF8 FF9 GT5 G80 JC4 KC4 KNP KUP K34K47 K68 LQ9 M32 NCI NEI NP3 NP5 OSG P30 QSSR4Y R9U R9Z SAF SLM TRB UC6 UK3 UQA U2K UFIUF3 UK3 VR4 VTV VXS V73 XSS X88 YD3 YD6 YE9YSS ZGC ZYI Z60 Z82 ISS ISZ 4IU 6YT 691 6927YT

BC/CC U 8555 692

143 5 FXWH2Q CKI57532GCEK19N031344764

Page 59: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

chevRolet impala 2006-2013

Automotive Data Solutions Inc. © 2015 4

INSTALLATION INSTRUCTIONS STEP 1

• Unbox the aftermarket radio and locate its main harness.

• Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.

STEP 2

• Connect the factory harness to the GM5+ T-harness.

STEP 3• Plug the aftermarket radio harnesses into the aftermarket

radio.

• Plug the Data cable to the data port of the aftermarket radio.

• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.

STEP 4• Connect all the harnesses to the Maestro RR module then

proceed to module setup.

The module is now ready to be used.

Insert the aftermarket radio in the dashboard housing and test all the functionalities.

Reassemble the dashboard carefully.

AMPLIFIER ONLYDETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS

• If your vehicle is equipped with a factory amplifi er you can connect the RCA wiring to the low level outputs of your aftermarket radio, or connect the level matching circuits to the speaker outputs of the aftermarket radio.

• If your aftermarket radio does not have low level outputs, has only a single RCA output, or the RCA output level is 2 volts or less then it is recommended to connect the level matching circuit to the speaker outputs. If the volume does not go loud enough using the RCA connections, the level matching circuits can be used.

• The internal amplifi er in some radios is not compatible with the level matching circuit. In these cases, there will be fl oor noise (hissing or buzzing at low levels) when the level matching circuit is connected. Change to the RCA connections to eliminate this noise.

TROUBLESHOOTING TIPS:

• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.

• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”

1

Page 60: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

chevRolet impala 2006-2013

Automotive Data Solutions Inc. © 2015 5

B

C

A FG

C

AB

G

F

CENTERCENTER

SUBSUB

BACKUP CAMBACKUP CAM

1A

E

E

BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)

WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)

PURPLE/BLACK - RR SPEAKER (-)

YELLOW - 12V (+)

BLACK - GROUNDRED - ACCESSORY (+)

BLUE/WHITE - AMP. TURN ON (+)

PURPLE - RR SPEAKER (+)

ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)

YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED

MAESTRO RR MODULE

MAINHARNESS

RCA CABLES

WIRES FROMVEHICLE

GMS05+ T-HARNESS

FACTORY RADIO HARNESS

SPEAKER

WHITE

OR

WHITE/BLACKGRAYGRAY/BLACKGREENGREEN/BLACK

PURPLE/BLACKPURPLE

STEP 1

STEP 2

STEP 3

STEP 4

SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS

LF SPEAKER

RF SPEAKER

LR SPEAKER

RR SPEAKER

BROWN - MUTE (-)

CONNECT TOAFTERMARKET RADIO

CONNECT TO RADIO WITH LOW LEVEL OUTPUT:

CONNECT TO RADIO WITH HIGH LEVEL OUTPUT:

WIRING DIAGRAM with an Amplifier

STEERING WHEELCONTROL CABLE

Page 61: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

chevRolet impala 2006-2013

Automotive Data Solutions Inc. © 2015 6

BACKUP CAMBACKUP CAM

CENTERCENTER

SUBSUB

B

C

A FG

C

AB

G

F

1B

E

E

STEP 1

BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)

MAINHARNESS

RCA CABLES

WIRES FROMVEHICLE

GMS05+ T-HARNESS

FACTORY RADIO HARNESS

(NOT CONNECTED)

(NOT CONNECTED)

WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)

PURPLE/BLACK - RR SPEAKER (-)

YELLOW - 12V (+)

BLACK - GROUNDRED - ACCESSORY (+)

BLUE/WHITE - AMP. TURN ON (+)

PURPLE - RR SPEAKER (+)

STEP 2

STEP 3

STEP 4

SPEAKER

MAESTRO RR MODULE

ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)

YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED

BROWN - MUTE (-)

CONNECT TOAFTERMARKET RADIO

SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS

WIRING DIAGRAM without an Amplifier

CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS

STEERING WHEELCONTROL CABLE

Page 62: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

OPTIONAL ACCESSORIESNone

PROGRAMMED FIRMWAREADS-RR(SR)-GMS05-AS

PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro GM5+ Installation Harness

INSTALL GUIDEChEvROLET MONTE CARLO

2006-2007Retains steeRing wheel contRols, onstaR, bluetooth and moRe!

NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.

Page 63: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

chevRolet monte caRlo 2006-2007

Automotive Data Solutions Inc. © 2015 2

WELCOME

NEED hELP?

Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.

Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.

1 866 427-2999

[email protected]

maestro.idatalink.com/supportwww.12voltdata.com/forum

TABLE OF CONTENTS

Before Installing 3

Installation Instructions 4

Wiring Diagram with an Amplifi er 5

Wiring Diagram without an Amplifi er 6

Page 64: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

chevRolet monte caRlo 2006-2007

Automotive Data Solutions Inc. © 2015 3

BEFORE INSTALLING STEP 1

DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:

METHOD 1: Look for the following logos in the vehicle. They are usually on the speaker covers or on the radio unit. If you fi nd any of the following logos Bose, Pioneer or Monsoon, you have a factory amplifi er.

METHOD 2: Look for the following sticker in the glove box. This sticker will indicate all the Regular Production Option (RPO) codes. If you fi nd any of the following codes UQA, UQS or UQG, you have a factory amplifi er.

STEP 2IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:

Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifi er and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits.

IF YOUR VEHICLE NOT IS EQUIPPED WITH A FACTORY AMPLIFIER:

Follow the installation instructions and complete the installation as shown in the wiring diagram without an amplifi er.

1

SERVICE PARTS IDENTIFICATION DO NOT REMOVE

AGI AG2 AJ1 AL0 AM7 AN3 AU0 AU3 A31 B30 B4UB58 B81 B82 CJ3 C49 C7H DF5 DK7 DL3 DT4 D07EVA E63 FF8 FF9 GT5 G80 JC4 KC4 KNP KUP K34K47 K68 LQ9 M32 NCI NEI NP3 NP5 OSG P30 QSSR4Y R9U R9Z SAF SLM TRB UC6 UK3 UQA U2K UFIUF3 UK3 VR4 VTV VXS V73 XSS X88 YD3 YD6 YE9YSS ZGC ZYI Z60 Z82 ISS ISZ 4IU 6YT 691 6927YT

BC/CC U 8555 692

143 5 FXWH2Q CKI57532GCEK19N031344764

Page 65: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

chevRolet monte caRlo 2006-2007

Automotive Data Solutions Inc. © 2015 4

INSTALLATION INSTRUCTIONS STEP 1

• Unbox the aftermarket radio and locate its main harness.

• Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.

STEP 2

• Connect the factory harness to the GM5+ T-harness.

STEP 3• Plug the aftermarket radio harnesses into the aftermarket

radio.

• Plug the Data cable to the data port of the aftermarket radio.

• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.

STEP 4• Connect all the harnesses to the Maestro RR module then

proceed to module setup.

The module is now ready to be used.

Insert the aftermarket radio in the dashboard housing and test all the functionalities.

Reassemble the dashboard carefully.

AMPLIFIER ONLYDETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS

• If your vehicle is equipped with a factory amplifi er you can connect the RCA wiring to the low level outputs of your aftermarket radio, or connect the level matching circuits to the speaker outputs of the aftermarket radio.

• If your aftermarket radio does not have low level outputs, has only a single RCA output, or the RCA output level is 2 volts or less then it is recommended to connect the level matching circuit to the speaker outputs. If the volume does not go loud enough using the RCA connections, the level matching circuits can be used.

• The internal amplifi er in some radios is not compatible with the level matching circuit. In these cases, there will be fl oor noise (hissing or buzzing at low levels) when the level matching circuit is connected. Change to the RCA connections to eliminate this noise.

TROUBLESHOOTING TIPS:

• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.

• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”

1

Page 66: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

chevRolet monte caRlo 2006-2007

Automotive Data Solutions Inc. © 2015 5

B

C

A FG

C

AB

G

F

CENTERCENTER

SUBSUB

BACKUP CAMBACKUP CAM

1A

E

E

BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)

WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)

PURPLE/BLACK - RR SPEAKER (-)

YELLOW - 12V (+)

BLACK - GROUNDRED - ACCESSORY (+)

BLUE/WHITE - AMP. TURN ON (+)

PURPLE - RR SPEAKER (+)

ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)

YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED

MAESTRO RR MODULE

MAINHARNESS

RCA CABLES

WIRES FROMVEHICLE

GMS05+ T-HARNESS

FACTORY RADIO HARNESS

SPEAKER

WHITE

OR

WHITE/BLACKGRAYGRAY/BLACKGREENGREEN/BLACK

PURPLE/BLACKPURPLE

STEP 1

STEP 2

STEP 3

STEP 4

SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS

LF SPEAKER

RF SPEAKER

LR SPEAKER

RR SPEAKER

BROWN - MUTE (-)

CONNECT TOAFTERMARKET RADIO

CONNECT TO RADIO WITH LOW LEVEL OUTPUT:

CONNECT TO RADIO WITH HIGH LEVEL OUTPUT:

WIRING DIAGRAM with an Amplifier

STEERING WHEELCONTROL CABLE

Page 67: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

chevRolet monte caRlo 2006-2007

Automotive Data Solutions Inc. © 2015 6

BACKUP CAMBACKUP CAM

CENTERCENTER

SUBSUB

B

C

A FG

C

AB

G

F

1B

E

E

STEP 1

BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)

MAINHARNESS

RCA CABLES

WIRES FROMVEHICLE

GMS05+ T-HARNESS

FACTORY RADIO HARNESS

(NOT CONNECTED)

(NOT CONNECTED)

WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)

PURPLE/BLACK - RR SPEAKER (-)

YELLOW - 12V (+)

BLACK - GROUNDRED - ACCESSORY (+)

BLUE/WHITE - AMP. TURN ON (+)

PURPLE - RR SPEAKER (+)

STEP 2

STEP 3

STEP 4

SPEAKER

MAESTRO RR MODULE

ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)

YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED

BROWN - MUTE (-)

CONNECT TOAFTERMARKET RADIO

SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS

WIRING DIAGRAM without an Amplifier

CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS

STEERING WHEELCONTROL CABLE

Page 68: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

OPTIONAL ACCESSORIESNone

PROGRAMMED FIRMWAREADS-RR(SR)-GMS05-AS

PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro GM5+ Installation Harness

INSTALL GUIDEChEvROLET SILvERADO 1500

2007-2011Retains steeRing wheel contRols, onstaR, bluetooth and moRe!

NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.

Page 69: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

chevRolet silveRado 1500 2007-2011

Automotive Data Solutions Inc. © 2015 2

WELCOME

NEED hELP?

Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.

Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.

1 866 427-2999

[email protected]

maestro.idatalink.com/supportwww.12voltdata.com/forum

TABLE OF CONTENTS

Before Installing 3

Installation Instructions 4

Wiring Diagram with an Amplifi er 5

Wiring Diagram without an Amplifi er 6

Page 70: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

chevRolet silveRado 1500 2007-2011

Automotive Data Solutions Inc. © 2015 3

BEFORE INSTALLING STEP 1

DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:

METHOD 1: Look for the following logos in the vehicle. They are usually on the speaker covers or on the radio unit. If you fi nd any of the following logos Bose, Pioneer or Monsoon, you have a factory amplifi er.

METHOD 2: Look for the following sticker in the glove box. This sticker will indicate all the Regular Production Option (RPO) codes. If you fi nd any of the following codes UQA, UQS or UQG, you have a factory amplifi er.

STEP 2IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:

Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifi er and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits.

IF YOUR VEHICLE NOT IS EQUIPPED WITH A FACTORY AMPLIFIER:

Follow the installation instructions and complete the installation as shown in the wiring diagram without an amplifi er.

1

SERVICE PARTS IDENTIFICATION DO NOT REMOVE

AGI AG2 AJ1 AL0 AM7 AN3 AU0 AU3 A31 B30 B4UB58 B81 B82 CJ3 C49 C7H DF5 DK7 DL3 DT4 D07EVA E63 FF8 FF9 GT5 G80 JC4 KC4 KNP KUP K34K47 K68 LQ9 M32 NCI NEI NP3 NP5 OSG P30 QSSR4Y R9U R9Z SAF SLM TRB UC6 UK3 UQA U2K UFIUF3 UK3 VR4 VTV VXS V73 XSS X88 YD3 YD6 YE9YSS ZGC ZYI Z60 Z82 ISS ISZ 4IU 6YT 691 6927YT

BC/CC U 8555 692

143 5 FXWH2Q CKI57532GCEK19N031344764

Page 71: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

chevRolet silveRado 1500 2007-2011

Automotive Data Solutions Inc. © 2015 4

INSTALLATION INSTRUCTIONS STEP 1

• Unbox the aftermarket radio and locate its main harness.

• Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.

STEP 2

• Connect the factory harness to the GM5+ T-harness.

STEP 3• Plug the aftermarket radio harnesses into the aftermarket

radio.

• Plug the Data cable to the data port of the aftermarket radio.

• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.

STEP 4• Connect all the harnesses to the Maestro RR module then

proceed to module setup.

The module is now ready to be used.

Insert the aftermarket radio in the dashboard housing and test all the functionalities.

Reassemble the dashboard carefully.

AMPLIFIER ONLYDETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS

• If your vehicle is equipped with a factory amplifi er you can connect the RCA wiring to the low level outputs of your aftermarket radio, or connect the level matching circuits to the speaker outputs of the aftermarket radio.

• If your aftermarket radio does not have low level outputs, has only a single RCA output, or the RCA output level is 2 volts or less then it is recommended to connect the level matching circuit to the speaker outputs. If the volume does not go loud enough using the RCA connections, the level matching circuits can be used.

• The internal amplifi er in some radios is not compatible with the level matching circuit. In these cases, there will be fl oor noise (hissing or buzzing at low levels) when the level matching circuit is connected. Change to the RCA connections to eliminate this noise.

TROUBLESHOOTING TIPS:

• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.

• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”

1

Page 72: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

chevRolet silveRado 1500 2007-2011

Automotive Data Solutions Inc. © 2015 5

B

C

A FG

C

AB

G

F

CENTERCENTER

SUBSUB

BACKUP CAMBACKUP CAM

1A

E

E

BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)

WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)

PURPLE/BLACK - RR SPEAKER (-)

YELLOW - 12V (+)

BLACK - GROUNDRED - ACCESSORY (+)

BLUE/WHITE - AMP. TURN ON (+)

PURPLE - RR SPEAKER (+)

ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)

YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED

MAESTRO RR MODULE

MAINHARNESS

RCA CABLES

WIRES FROMVEHICLE

GMS05+ T-HARNESS

FACTORY RADIO HARNESS

SPEAKER

WHITE

OR

WHITE/BLACKGRAYGRAY/BLACKGREENGREEN/BLACK

PURPLE/BLACKPURPLE

STEP 1

STEP 2

STEP 3

STEP 4

SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS

LF SPEAKER

RF SPEAKER

LR SPEAKER

RR SPEAKER

BROWN - MUTE (-)

CONNECT TOAFTERMARKET RADIO

CONNECT TO RADIO WITH LOW LEVEL OUTPUT:

CONNECT TO RADIO WITH HIGH LEVEL OUTPUT:

WIRING DIAGRAM with an Amplifier

STEERING WHEELCONTROL CABLE

Page 73: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

chevRolet silveRado 1500 2007-2011

Automotive Data Solutions Inc. © 2015 6

BACKUP CAMBACKUP CAM

CENTERCENTER

SUBSUB

B

C

A FG

C

AB

G

F

1B

E

E

STEP 1

BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)

MAINHARNESS

RCA CABLES

WIRES FROMVEHICLE

GMS05+ T-HARNESS

FACTORY RADIO HARNESS

(NOT CONNECTED)

(NOT CONNECTED)

WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)

PURPLE/BLACK - RR SPEAKER (-)

YELLOW - 12V (+)

BLACK - GROUNDRED - ACCESSORY (+)

BLUE/WHITE - AMP. TURN ON (+)

PURPLE - RR SPEAKER (+)

STEP 2

STEP 3

STEP 4

SPEAKER

MAESTRO RR MODULE

ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)

YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED

BROWN - MUTE (-)

CONNECT TOAFTERMARKET RADIO

SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS

WIRING DIAGRAM without an Amplifier

CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS

STEERING WHEELCONTROL CABLE

Page 74: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

OPTIONAL ACCESSORIESNone

PROGRAMMED FIRMWAREADS-RR(SR)-GMS05-AS

PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro GM5+ Installation Harness

INSTALL GUIDEChEvROLET SILvERADO 1500

WIThOUT NAv 2012-2013Retains steeRing wheel contRols, onstaR, bluetooth and moRe!

NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.

Page 75: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

chevRolet silveRado 1500 without nav 2012-2013

Automotive Data Solutions Inc. © 2015 2

WELCOME

NEED hELP?

Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.

Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.

1 866 427-2999

[email protected]

maestro.idatalink.com/supportwww.12voltdata.com/forum

TABLE OF CONTENTS

Before Installing 3

Installation Instructions 4

Wiring Diagram with an Amplifi er 5

Wiring Diagram without an Amplifi er 6

Page 76: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

chevRolet silveRado 1500 without nav 2012-2013

Automotive Data Solutions Inc. © 2015 3

BEFORE INSTALLING STEP 1

DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:

METHOD 1: Look for the following logos in the vehicle. They are usually on the speaker covers or on the radio unit. If you fi nd any of the following logos Bose, Pioneer or Monsoon, you have a factory amplifi er.

METHOD 2: Look for the following sticker in the glove box. This sticker will indicate all the Regular Production Option (RPO) codes. If you fi nd any of the following codes UQA, UQS or UQG, you have a factory amplifi er.

STEP 2IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:

Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifi er and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits.

IF YOUR VEHICLE NOT IS EQUIPPED WITH A FACTORY AMPLIFIER:

Follow the installation instructions and complete the installation as shown in the wiring diagram without an amplifi er.

1

SERVICE PARTS IDENTIFICATION DO NOT REMOVE

AGI AG2 AJ1 AL0 AM7 AN3 AU0 AU3 A31 B30 B4UB58 B81 B82 CJ3 C49 C7H DF5 DK7 DL3 DT4 D07EVA E63 FF8 FF9 GT5 G80 JC4 KC4 KNP KUP K34K47 K68 LQ9 M32 NCI NEI NP3 NP5 OSG P30 QSSR4Y R9U R9Z SAF SLM TRB UC6 UK3 UQA U2K UFIUF3 UK3 VR4 VTV VXS V73 XSS X88 YD3 YD6 YE9YSS ZGC ZYI Z60 Z82 ISS ISZ 4IU 6YT 691 6927YT

BC/CC U 8555 692

143 5 FXWH2Q CKI57532GCEK19N031344764

Page 77: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

chevRolet silveRado 1500 without nav 2012-2013

Automotive Data Solutions Inc. © 2015 4

INSTALLATION INSTRUCTIONS STEP 1

• Unbox the aftermarket radio and locate its main harness.

• Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.

STEP 2

• Connect the factory harness to the GM5+ T-harness.

STEP 3• Plug the aftermarket radio harnesses into the aftermarket

radio.

• Plug the Data cable to the data port of the aftermarket radio.

• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.

STEP 4• Connect all the harnesses to the Maestro RR module then

proceed to module setup.

The module is now ready to be used.

Insert the aftermarket radio in the dashboard housing and test all the functionalities.

Reassemble the dashboard carefully.

AMPLIFIER ONLYDETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS

• If your vehicle is equipped with a factory amplifi er you can connect the RCA wiring to the low level outputs of your aftermarket radio, or connect the level matching circuits to the speaker outputs of the aftermarket radio.

• If your aftermarket radio does not have low level outputs, has only a single RCA output, or the RCA output level is 2 volts or less then it is recommended to connect the level matching circuit to the speaker outputs. If the volume does not go loud enough using the RCA connections, the level matching circuits can be used.

• The internal amplifi er in some radios is not compatible with the level matching circuit. In these cases, there will be fl oor noise (hissing or buzzing at low levels) when the level matching circuit is connected. Change to the RCA connections to eliminate this noise.

TROUBLESHOOTING TIPS:

• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.

• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”

1

Page 78: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

chevRolet silveRado 1500 without nav 2012-2013

Automotive Data Solutions Inc. © 2015 5

B

C

A FG

C

AB

G

F

CENTERCENTER

SUBSUB

BACKUP CAMBACKUP CAM

1A

E

E

BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)

WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)

PURPLE/BLACK - RR SPEAKER (-)

YELLOW - 12V (+)

BLACK - GROUNDRED - ACCESSORY (+)

BLUE/WHITE - AMP. TURN ON (+)

PURPLE - RR SPEAKER (+)

ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)

YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED

MAESTRO RR MODULE

MAINHARNESS

RCA CABLES

WIRES FROMVEHICLE

GMS05+ T-HARNESS

FACTORY RADIO HARNESS

SPEAKER

WHITE

OR

WHITE/BLACKGRAYGRAY/BLACKGREENGREEN/BLACK

PURPLE/BLACKPURPLE

STEP 1

STEP 2

STEP 3

STEP 4

SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS

LF SPEAKER

RF SPEAKER

LR SPEAKER

RR SPEAKER

BROWN - MUTE (-)

CONNECT TOAFTERMARKET RADIO

CONNECT TO RADIO WITH LOW LEVEL OUTPUT:

CONNECT TO RADIO WITH HIGH LEVEL OUTPUT:

WIRING DIAGRAM with an Amplifier

STEERING WHEELCONTROL CABLE

Page 79: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

chevRolet silveRado 1500 without nav 2012-2013

Automotive Data Solutions Inc. © 2015 6

BACKUP CAMBACKUP CAM

CENTERCENTER

SUBSUB

B

C

A FG

C

AB

G

F

1B

E

E

STEP 1

BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)

MAINHARNESS

RCA CABLES

WIRES FROMVEHICLE

GMS05+ T-HARNESS

FACTORY RADIO HARNESS

(NOT CONNECTED)

(NOT CONNECTED)

WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)

PURPLE/BLACK - RR SPEAKER (-)

YELLOW - 12V (+)

BLACK - GROUNDRED - ACCESSORY (+)

BLUE/WHITE - AMP. TURN ON (+)

PURPLE - RR SPEAKER (+)

STEP 2

STEP 3

STEP 4

SPEAKER

MAESTRO RR MODULE

ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)

YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED

BROWN - MUTE (-)

CONNECT TOAFTERMARKET RADIO

SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS

WIRING DIAGRAM without an Amplifier

CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS

STEERING WHEELCONTROL CABLE

Page 80: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

OPTIONAL ACCESSORIESNone

PROGRAMMED FIRMWAREADS-RR(SR)-GMS05-AS

PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro GM5+ Installation Harness

INSTALL GUIDEChEvROLET

SILvERADO 2500 & 3500 2007-2011

NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.

Page 81: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

chevRolet silveRado 2500 & 3500 2007-2011

Automotive Data Solutions Inc. © 2015 2

WELCOME

NEED hELP?

Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.

Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.

1 866 427-2999

[email protected]

maestro.idatalink.com/supportwww.12voltdata.com/forum

TABLE OF CONTENTS

Before Installing 3

Installation Instructions 4

Wiring Diagram with an Amplifi er 5

Wiring Diagram without an Amplifi er 6

Page 82: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

chevRolet silveRado 2500 & 3500 2007-2011

Automotive Data Solutions Inc. © 2015 3

BEFORE INSTALLING STEP 1

DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:

METHOD 1: Look for the following logos in the vehicle. They are usually on the speaker covers or on the radio unit. If you fi nd any of the following logos Bose, Pioneer or Monsoon, you have a factory amplifi er.

METHOD 2: Look for the following sticker in the glove box. This sticker will indicate all the Regular Production Option (RPO) codes. If you fi nd any of the following codes UQA, UQS or UQG, you have a factory amplifi er.

STEP 2IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:

Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifi er and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits.

IF YOUR VEHICLE NOT IS EQUIPPED WITH A FACTORY AMPLIFIER:

Follow the installation instructions and complete the installation as shown in the wiring diagram without an amplifi er.

1

SERVICE PARTS IDENTIFICATION DO NOT REMOVE

AGI AG2 AJ1 AL0 AM7 AN3 AU0 AU3 A31 B30 B4UB58 B81 B82 CJ3 C49 C7H DF5 DK7 DL3 DT4 D07EVA E63 FF8 FF9 GT5 G80 JC4 KC4 KNP KUP K34K47 K68 LQ9 M32 NCI NEI NP3 NP5 OSG P30 QSSR4Y R9U R9Z SAF SLM TRB UC6 UK3 UQA U2K UFIUF3 UK3 VR4 VTV VXS V73 XSS X88 YD3 YD6 YE9YSS ZGC ZYI Z60 Z82 ISS ISZ 4IU 6YT 691 6927YT

BC/CC U 8555 692

143 5 FXWH2Q CKI57532GCEK19N031344764

Page 83: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

chevRolet silveRado 2500 & 3500 2007-2011

Automotive Data Solutions Inc. © 2015 4

INSTALLATION INSTRUCTIONS STEP 1

• Unbox the aftermarket radio and locate its main harness.

• Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.

STEP 2

• Connect the factory harness to the GM5+ T-harness.

STEP 3• Plug the aftermarket radio harnesses into the aftermarket

radio.

• Plug the Data cable to the data port of the aftermarket radio.

• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.

STEP 4• Connect all the harnesses to the Maestro RR module then

proceed to module setup.

The module is now ready to be used.

Insert the aftermarket radio in the dashboard housing and test all the functionalities.

Reassemble the dashboard carefully.

AMPLIFIER ONLYDETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS

• If your vehicle is equipped with a factory amplifi er you can connect the RCA wiring to the low level outputs of your aftermarket radio, or connect the level matching circuits to the speaker outputs of the aftermarket radio.

• If your aftermarket radio does not have low level outputs, has only a single RCA output, or the RCA output level is 2 volts or less then it is recommended to connect the level matching circuit to the speaker outputs. If the volume does not go loud enough using the RCA connections, the level matching circuits can be used.

• The internal amplifi er in some radios is not compatible with the level matching circuit. In these cases, there will be fl oor noise (hissing or buzzing at low levels) when the level matching circuit is connected. Change to the RCA connections to eliminate this noise.

TROUBLESHOOTING TIPS:

• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.

• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”

1

Page 84: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

chevRolet silveRado 2500 & 3500 2007-2011

Automotive Data Solutions Inc. © 2015 5

B

C

A FG

C

AB

G

F

CENTERCENTER

SUBSUB

BACKUP CAMBACKUP CAM

1A

E

E

BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)

WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)

PURPLE/BLACK - RR SPEAKER (-)

YELLOW - 12V (+)

BLACK - GROUNDRED - ACCESSORY (+)

BLUE/WHITE - AMP. TURN ON (+)

PURPLE - RR SPEAKER (+)

ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)

YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED

MAESTRO RR MODULE

MAINHARNESS

RCA CABLES

WIRES FROMVEHICLE

GMS05+ T-HARNESS

FACTORY RADIO HARNESS

SPEAKER

WHITE

OR

WHITE/BLACKGRAYGRAY/BLACKGREENGREEN/BLACK

PURPLE/BLACKPURPLE

STEP 1

STEP 2

STEP 3

STEP 4

SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS

LF SPEAKER

RF SPEAKER

LR SPEAKER

RR SPEAKER

BROWN - MUTE (-)

CONNECT TOAFTERMARKET RADIO

CONNECT TO RADIO WITH LOW LEVEL OUTPUT:

CONNECT TO RADIO WITH HIGH LEVEL OUTPUT:

WIRING DIAGRAM with an Amplifier

STEERING WHEELCONTROL CABLE

Page 85: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

chevRolet silveRado 2500 & 3500 2007-2011

Automotive Data Solutions Inc. © 2015 6

BACKUP CAMBACKUP CAM

CENTERCENTER

SUBSUB

B

C

A FG

C

AB

G

F

1B

E

E

STEP 1

BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)

MAINHARNESS

RCA CABLES

WIRES FROMVEHICLE

GMS05+ T-HARNESS

FACTORY RADIO HARNESS

(NOT CONNECTED)

(NOT CONNECTED)

WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)

PURPLE/BLACK - RR SPEAKER (-)

YELLOW - 12V (+)

BLACK - GROUNDRED - ACCESSORY (+)

BLUE/WHITE - AMP. TURN ON (+)

PURPLE - RR SPEAKER (+)

STEP 2

STEP 3

STEP 4

SPEAKER

MAESTRO RR MODULE

ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)

YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED

BROWN - MUTE (-)

CONNECT TOAFTERMARKET RADIO

SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS

WIRING DIAGRAM without an Amplifier

CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS

STEERING WHEELCONTROL CABLE

Page 86: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

OPTIONAL ACCESSORIESNone

PROGRAMMED FIRMWAREADS-RR(SR)-GMS05-AS

PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro GM5+ Installation Harness

INSTALL GUIDEChEvROLET

SILvERADO 2500 & 3500WIThOUT NAv 2012-2014

NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.

Page 87: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

chevRolet silveRado 2500 & 3500 without nav 2012-2014

Automotive Data Solutions Inc. © 2015 2

WELCOME

NEED hELP?

Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.

Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.

1 866 427-2999

[email protected]

maestro.idatalink.com/supportwww.12voltdata.com/forum

TABLE OF CONTENTS

Before Installing 3

Installation Instructions 4

Wiring Diagram with an Amplifi er 5

Wiring Diagram without an Amplifi er 6

Page 88: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

chevRolet silveRado 2500 & 3500 without nav 2012-2014

Automotive Data Solutions Inc. © 2015 3

BEFORE INSTALLING STEP 1

DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:

METHOD 1: Look for the following logos in the vehicle. They are usually on the speaker covers or on the radio unit. If you fi nd any of the following logos Bose, Pioneer or Monsoon, you have a factory amplifi er.

METHOD 2: Look for the following sticker in the glove box. This sticker will indicate all the Regular Production Option (RPO) codes. If you fi nd any of the following codes UQA, UQS or UQG, you have a factory amplifi er.

STEP 2IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:

Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifi er and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits.

IF YOUR VEHICLE NOT IS EQUIPPED WITH A FACTORY AMPLIFIER:

Follow the installation instructions and complete the installation as shown in the wiring diagram without an amplifi er.

1

SERVICE PARTS IDENTIFICATION DO NOT REMOVE

AGI AG2 AJ1 AL0 AM7 AN3 AU0 AU3 A31 B30 B4UB58 B81 B82 CJ3 C49 C7H DF5 DK7 DL3 DT4 D07EVA E63 FF8 FF9 GT5 G80 JC4 KC4 KNP KUP K34K47 K68 LQ9 M32 NCI NEI NP3 NP5 OSG P30 QSSR4Y R9U R9Z SAF SLM TRB UC6 UK3 UQA U2K UFIUF3 UK3 VR4 VTV VXS V73 XSS X88 YD3 YD6 YE9YSS ZGC ZYI Z60 Z82 ISS ISZ 4IU 6YT 691 6927YT

BC/CC U 8555 692

143 5 FXWH2Q CKI57532GCEK19N031344764

Page 89: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

chevRolet silveRado 2500 & 3500 without nav 2012-2014

Automotive Data Solutions Inc. © 2015 4

INSTALLATION INSTRUCTIONS STEP 1

• Unbox the aftermarket radio and locate its main harness.

• Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.

STEP 2

• Connect the factory harness to the GM5+ T-harness.

STEP 3• Plug the aftermarket radio harnesses into the aftermarket

radio.

• Plug the Data cable to the data port of the aftermarket radio.

• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.

STEP 4• Connect all the harnesses to the Maestro RR module then

proceed to module setup.

The module is now ready to be used.

Insert the aftermarket radio in the dashboard housing and test all the functionalities.

Reassemble the dashboard carefully.

AMPLIFIER ONLYDETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS

• If your vehicle is equipped with a factory amplifi er you can connect the RCA wiring to the low level outputs of your aftermarket radio, or connect the level matching circuits to the speaker outputs of the aftermarket radio.

• If your aftermarket radio does not have low level outputs, has only a single RCA output, or the RCA output level is 2 volts or less then it is recommended to connect the level matching circuit to the speaker outputs. If the volume does not go loud enough using the RCA connections, the level matching circuits can be used.

• The internal amplifi er in some radios is not compatible with the level matching circuit. In these cases, there will be fl oor noise (hissing or buzzing at low levels) when the level matching circuit is connected. Change to the RCA connections to eliminate this noise.

TROUBLESHOOTING TIPS:

• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.

• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”

1

Page 90: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

chevRolet silveRado 2500 & 3500 without nav 2012-2014

Automotive Data Solutions Inc. © 2015 5

B

C

A FG

C

AB

G

F

CENTERCENTER

SUBSUB

BACKUP CAMBACKUP CAM

1A

E

E

BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)

WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)

PURPLE/BLACK - RR SPEAKER (-)

YELLOW - 12V (+)

BLACK - GROUNDRED - ACCESSORY (+)

BLUE/WHITE - AMP. TURN ON (+)

PURPLE - RR SPEAKER (+)

ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)

YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED

MAESTRO RR MODULE

MAINHARNESS

RCA CABLES

WIRES FROMVEHICLE

GMS05+ T-HARNESS

FACTORY RADIO HARNESS

SPEAKER

WHITE

OR

WHITE/BLACKGRAYGRAY/BLACKGREENGREEN/BLACK

PURPLE/BLACKPURPLE

STEP 1

STEP 2

STEP 3

STEP 4

SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS

LF SPEAKER

RF SPEAKER

LR SPEAKER

RR SPEAKER

BROWN - MUTE (-)

CONNECT TOAFTERMARKET RADIO

CONNECT TO RADIO WITH LOW LEVEL OUTPUT:

CONNECT TO RADIO WITH HIGH LEVEL OUTPUT:

WIRING DIAGRAM with an Amplifier

STEERING WHEELCONTROL CABLE

Page 91: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

chevRolet silveRado 2500 & 3500 without nav 2012-2014

Automotive Data Solutions Inc. © 2015 6

BACKUP CAMBACKUP CAM

CENTERCENTER

SUBSUB

B

C

A FG

C

AB

G

F

1B

E

E

STEP 1

BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)

MAINHARNESS

RCA CABLES

WIRES FROMVEHICLE

GMS05+ T-HARNESS

FACTORY RADIO HARNESS

(NOT CONNECTED)

(NOT CONNECTED)

WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)

PURPLE/BLACK - RR SPEAKER (-)

YELLOW - 12V (+)

BLACK - GROUNDRED - ACCESSORY (+)

BLUE/WHITE - AMP. TURN ON (+)

PURPLE - RR SPEAKER (+)

STEP 2

STEP 3

STEP 4

SPEAKER

MAESTRO RR MODULE

ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)

YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED

BROWN - MUTE (-)

CONNECT TOAFTERMARKET RADIO

SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS

WIRING DIAGRAM without an Amplifier

CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS

STEERING WHEELCONTROL CABLE

Page 92: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

OPTIONAL ACCESSORIESNone

PROGRAMMED FIRMWAREADS-RR(SR)-GMS05-AS

PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro GM5+ Installation Harness

INSTALL GUIDEChEvROLET SUBURBAN

2007-2011Retains steeRing wheel contRols, onstaR, bluetooth and moRe!

NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.

Page 93: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

chevRolet subuRban 2007-2011

Automotive Data Solutions Inc. © 2015 2

WELCOME

NEED hELP?

Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.

Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.

1 866 427-2999

[email protected]

maestro.idatalink.com/supportwww.12voltdata.com/forum

TABLE OF CONTENTS

Before Installing 3

Installation Instructions 4

Wiring Diagram with an Amplifi er 5

Wiring Diagram without an Amplifi er 6

Page 94: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

chevRolet subuRban 2007-2011

Automotive Data Solutions Inc. © 2015 3

BEFORE INSTALLING STEP 1

DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:

METHOD 1: Look for the following logos in the vehicle. They are usually on the speaker covers or on the radio unit. If you fi nd any of the following logos Bose, Pioneer or Monsoon, you have a factory amplifi er.

METHOD 2: Look for the following sticker in the glove box. This sticker will indicate all the Regular Production Option (RPO) codes. If you fi nd any of the following codes UQA, UQS or UQG, you have a factory amplifi er.

STEP 2IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:

Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifi er and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits.

IF YOUR VEHICLE NOT IS EQUIPPED WITH A FACTORY AMPLIFIER:

Follow the installation instructions and complete the installation as shown in the wiring diagram without an amplifi er.

1

SERVICE PARTS IDENTIFICATION DO NOT REMOVE

AGI AG2 AJ1 AL0 AM7 AN3 AU0 AU3 A31 B30 B4UB58 B81 B82 CJ3 C49 C7H DF5 DK7 DL3 DT4 D07EVA E63 FF8 FF9 GT5 G80 JC4 KC4 KNP KUP K34K47 K68 LQ9 M32 NCI NEI NP3 NP5 OSG P30 QSSR4Y R9U R9Z SAF SLM TRB UC6 UK3 UQA U2K UFIUF3 UK3 VR4 VTV VXS V73 XSS X88 YD3 YD6 YE9YSS ZGC ZYI Z60 Z82 ISS ISZ 4IU 6YT 691 6927YT

BC/CC U 8555 692

143 5 FXWH2Q CKI57532GCEK19N031344764

Page 95: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

chevRolet subuRban 2007-2011

Automotive Data Solutions Inc. © 2015 4

INSTALLATION INSTRUCTIONS STEP 1

• Unbox the aftermarket radio and locate its main harness.

• Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.

STEP 2

• Connect the factory harness to the GM5+ T-harness.

STEP 3• Plug the aftermarket radio harnesses into the aftermarket

radio.

• Plug the Data cable to the data port of the aftermarket radio.

• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.

STEP 4• Connect all the harnesses to the Maestro RR module then

proceed to module setup.

The module is now ready to be used.

Insert the aftermarket radio in the dashboard housing and test all the functionalities.

Reassemble the dashboard carefully.

AMPLIFIER ONLYDETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS

• If your vehicle is equipped with a factory amplifi er you can connect the RCA wiring to the low level outputs of your aftermarket radio, or connect the level matching circuits to the speaker outputs of the aftermarket radio.

• If your aftermarket radio does not have low level outputs, has only a single RCA output, or the RCA output level is 2 volts or less then it is recommended to connect the level matching circuit to the speaker outputs. If the volume does not go loud enough using the RCA connections, the level matching circuits can be used.

• The internal amplifi er in some radios is not compatible with the level matching circuit. In these cases, there will be fl oor noise (hissing or buzzing at low levels) when the level matching circuit is connected. Change to the RCA connections to eliminate this noise.

TROUBLESHOOTING TIPS:

• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.

• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”

1

Page 96: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

chevRolet subuRban 2007-2011

Automotive Data Solutions Inc. © 2015 5

B

C

A FG

C

AB

G

F

CENTERCENTER

SUBSUB

BACKUP CAMBACKUP CAM

1A

E

E

BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)

WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)

PURPLE/BLACK - RR SPEAKER (-)

YELLOW - 12V (+)

BLACK - GROUNDRED - ACCESSORY (+)

BLUE/WHITE - AMP. TURN ON (+)

PURPLE - RR SPEAKER (+)

ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)

YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED

MAESTRO RR MODULE

MAINHARNESS

RCA CABLES

WIRES FROMVEHICLE

GMS05+ T-HARNESS

FACTORY RADIO HARNESS

SPEAKER

WHITE

OR

WHITE/BLACKGRAYGRAY/BLACKGREENGREEN/BLACK

PURPLE/BLACKPURPLE

STEP 1

STEP 2

STEP 3

STEP 4

SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS

LF SPEAKER

RF SPEAKER

LR SPEAKER

RR SPEAKER

BROWN - MUTE (-)

CONNECT TOAFTERMARKET RADIO

CONNECT TO RADIO WITH LOW LEVEL OUTPUT:

CONNECT TO RADIO WITH HIGH LEVEL OUTPUT:

WIRING DIAGRAM with an Amplifier

STEERING WHEELCONTROL CABLE

Page 97: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

chevRolet subuRban 2007-2011

Automotive Data Solutions Inc. © 2015 6

BACKUP CAMBACKUP CAM

CENTERCENTER

SUBSUB

B

C

A FG

C

AB

G

F

1B

E

E

STEP 1

BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)

MAINHARNESS

RCA CABLES

WIRES FROMVEHICLE

GMS05+ T-HARNESS

FACTORY RADIO HARNESS

(NOT CONNECTED)

(NOT CONNECTED)

WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)

PURPLE/BLACK - RR SPEAKER (-)

YELLOW - 12V (+)

BLACK - GROUNDRED - ACCESSORY (+)

BLUE/WHITE - AMP. TURN ON (+)

PURPLE - RR SPEAKER (+)

STEP 2

STEP 3

STEP 4

SPEAKER

MAESTRO RR MODULE

ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)

YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED

BROWN - MUTE (-)

CONNECT TOAFTERMARKET RADIO

SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS

WIRING DIAGRAM without an Amplifier

CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS

STEERING WHEELCONTROL CABLE

Page 98: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

OPTIONAL ACCESSORIESNone

PROGRAMMED FIRMWAREADS-RR(SR)-GMS05-AS

PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro GM5+ Installation Harness

INSTALL GUIDEChEvROLET SUBURBAN

WIThOUT NAv 2012-2014Retains steeRing wheel contRols, onstaR, bluetooth and moRe!

NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.

Page 99: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

chevRolet subuRban without nav 2012-2014

Automotive Data Solutions Inc. © 2015 2

WELCOME

NEED hELP?

Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.

Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.

1 866 427-2999

[email protected]

maestro.idatalink.com/supportwww.12voltdata.com/forum

TABLE OF CONTENTS

Before Installing 3

Installation Instructions 4

Wiring Diagram with an Amplifi er 5

Wiring Diagram without an Amplifi er 6

Page 100: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

chevRolet subuRban without nav 2012-2014

Automotive Data Solutions Inc. © 2015 3

BEFORE INSTALLING STEP 1

DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:

METHOD 1: Look for the following logos in the vehicle. They are usually on the speaker covers or on the radio unit. If you fi nd any of the following logos Bose, Pioneer or Monsoon, you have a factory amplifi er.

METHOD 2: Look for the following sticker in the glove box. This sticker will indicate all the Regular Production Option (RPO) codes. If you fi nd any of the following codes UQA, UQS or UQG, you have a factory amplifi er.

STEP 2IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:

Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifi er and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits.

IF YOUR VEHICLE NOT IS EQUIPPED WITH A FACTORY AMPLIFIER:

Follow the installation instructions and complete the installation as shown in the wiring diagram without an amplifi er.

1

SERVICE PARTS IDENTIFICATION DO NOT REMOVE

AGI AG2 AJ1 AL0 AM7 AN3 AU0 AU3 A31 B30 B4UB58 B81 B82 CJ3 C49 C7H DF5 DK7 DL3 DT4 D07EVA E63 FF8 FF9 GT5 G80 JC4 KC4 KNP KUP K34K47 K68 LQ9 M32 NCI NEI NP3 NP5 OSG P30 QSSR4Y R9U R9Z SAF SLM TRB UC6 UK3 UQA U2K UFIUF3 UK3 VR4 VTV VXS V73 XSS X88 YD3 YD6 YE9YSS ZGC ZYI Z60 Z82 ISS ISZ 4IU 6YT 691 6927YT

BC/CC U 8555 692

143 5 FXWH2Q CKI57532GCEK19N031344764

Page 101: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

chevRolet subuRban without nav 2012-2014

Automotive Data Solutions Inc. © 2015 4

INSTALLATION INSTRUCTIONS STEP 1

• Unbox the aftermarket radio and locate its main harness.

• Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.

STEP 2

• Connect the factory harness to the GM5+ T-harness.

STEP 3• Plug the aftermarket radio harnesses into the aftermarket

radio.

• Plug the Data cable to the data port of the aftermarket radio.

• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.

STEP 4• Connect all the harnesses to the Maestro RR module then

proceed to module setup.

The module is now ready to be used.

Insert the aftermarket radio in the dashboard housing and test all the functionalities.

Reassemble the dashboard carefully.

AMPLIFIER ONLYDETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS

• If your vehicle is equipped with a factory amplifi er you can connect the RCA wiring to the low level outputs of your aftermarket radio, or connect the level matching circuits to the speaker outputs of the aftermarket radio.

• If your aftermarket radio does not have low level outputs, has only a single RCA output, or the RCA output level is 2 volts or less then it is recommended to connect the level matching circuit to the speaker outputs. If the volume does not go loud enough using the RCA connections, the level matching circuits can be used.

• The internal amplifi er in some radios is not compatible with the level matching circuit. In these cases, there will be fl oor noise (hissing or buzzing at low levels) when the level matching circuit is connected. Change to the RCA connections to eliminate this noise.

TROUBLESHOOTING TIPS:

• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.

• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”

1

Page 102: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

chevRolet subuRban without nav 2012-2014

Automotive Data Solutions Inc. © 2015 5

B

C

A FG

C

AB

G

F

CENTERCENTER

SUBSUB

BACKUP CAMBACKUP CAM

1A

E

E

BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)

WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)

PURPLE/BLACK - RR SPEAKER (-)

YELLOW - 12V (+)

BLACK - GROUNDRED - ACCESSORY (+)

BLUE/WHITE - AMP. TURN ON (+)

PURPLE - RR SPEAKER (+)

ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)

YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED

MAESTRO RR MODULE

MAINHARNESS

RCA CABLES

WIRES FROMVEHICLE

GMS05+ T-HARNESS

FACTORY RADIO HARNESS

SPEAKER

WHITE

OR

WHITE/BLACKGRAYGRAY/BLACKGREENGREEN/BLACK

PURPLE/BLACKPURPLE

STEP 1

STEP 2

STEP 3

STEP 4

SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS

LF SPEAKER

RF SPEAKER

LR SPEAKER

RR SPEAKER

BROWN - MUTE (-)

CONNECT TOAFTERMARKET RADIO

CONNECT TO RADIO WITH LOW LEVEL OUTPUT:

CONNECT TO RADIO WITH HIGH LEVEL OUTPUT:

WIRING DIAGRAM with an Amplifier

STEERING WHEELCONTROL CABLE

Page 103: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

chevRolet subuRban without nav 2012-2014

Automotive Data Solutions Inc. © 2015 6

BACKUP CAMBACKUP CAM

CENTERCENTER

SUBSUB

B

C

A FG

C

AB

G

F

1B

E

E

STEP 1

BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)

MAINHARNESS

RCA CABLES

WIRES FROMVEHICLE

GMS05+ T-HARNESS

FACTORY RADIO HARNESS

(NOT CONNECTED)

(NOT CONNECTED)

WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)

PURPLE/BLACK - RR SPEAKER (-)

YELLOW - 12V (+)

BLACK - GROUNDRED - ACCESSORY (+)

BLUE/WHITE - AMP. TURN ON (+)

PURPLE - RR SPEAKER (+)

STEP 2

STEP 3

STEP 4

SPEAKER

MAESTRO RR MODULE

ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)

YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED

BROWN - MUTE (-)

CONNECT TOAFTERMARKET RADIO

SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS

WIRING DIAGRAM without an Amplifier

CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS

STEERING WHEELCONTROL CABLE

Page 104: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

OPTIONAL ACCESSORIESNone

PROGRAMMED FIRMWAREADS-RR(SR)-GMS05-AS

PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro GM5+ Installation Harness

INSTALL GUIDEChEvROLET TAhOE

2007-2011Retains steeRing wheel contRols, onstaR, bluetooth and moRe!

NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.

Page 105: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

chevRolet tahoe 2007-2011

Automotive Data Solutions Inc. © 2015 2

WELCOME

NEED hELP?

Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.

Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.

1 866 427-2999

[email protected]

maestro.idatalink.com/supportwww.12voltdata.com/forum

TABLE OF CONTENTS

Before Installing 3

Installation Instructions 4

Wiring Diagram with an Amplifi er 5

Wiring Diagram without an Amplifi er 6

Page 106: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

chevRolet tahoe 2007-2011

Automotive Data Solutions Inc. © 2015 3

BEFORE INSTALLING STEP 1

DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:

METHOD 1: Look for the following logos in the vehicle. They are usually on the speaker covers or on the radio unit. If you fi nd any of the following logos Bose, Pioneer or Monsoon, you have a factory amplifi er.

METHOD 2: Look for the following sticker in the glove box. This sticker will indicate all the Regular Production Option (RPO) codes. If you fi nd any of the following codes UQA, UQS or UQG, you have a factory amplifi er.

STEP 2IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:

Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifi er and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits.

IF YOUR VEHICLE NOT IS EQUIPPED WITH A FACTORY AMPLIFIER:

Follow the installation instructions and complete the installation as shown in the wiring diagram without an amplifi er.

1

SERVICE PARTS IDENTIFICATION DO NOT REMOVE

AGI AG2 AJ1 AL0 AM7 AN3 AU0 AU3 A31 B30 B4UB58 B81 B82 CJ3 C49 C7H DF5 DK7 DL3 DT4 D07EVA E63 FF8 FF9 GT5 G80 JC4 KC4 KNP KUP K34K47 K68 LQ9 M32 NCI NEI NP3 NP5 OSG P30 QSSR4Y R9U R9Z SAF SLM TRB UC6 UK3 UQA U2K UFIUF3 UK3 VR4 VTV VXS V73 XSS X88 YD3 YD6 YE9YSS ZGC ZYI Z60 Z82 ISS ISZ 4IU 6YT 691 6927YT

BC/CC U 8555 692

143 5 FXWH2Q CKI57532GCEK19N031344764

Page 107: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

chevRolet tahoe 2007-2011

Automotive Data Solutions Inc. © 2015 4

INSTALLATION INSTRUCTIONS STEP 1

• Unbox the aftermarket radio and locate its main harness.

• Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.

STEP 2

• Connect the factory harness to the GM5+ T-harness.

STEP 3• Plug the aftermarket radio harnesses into the aftermarket

radio.

• Plug the Data cable to the data port of the aftermarket radio.

• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.

STEP 4• Connect all the harnesses to the Maestro RR module then

proceed to module setup.

The module is now ready to be used.

Insert the aftermarket radio in the dashboard housing and test all the functionalities.

Reassemble the dashboard carefully.

AMPLIFIER ONLYDETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS

• If your vehicle is equipped with a factory amplifi er you can connect the RCA wiring to the low level outputs of your aftermarket radio, or connect the level matching circuits to the speaker outputs of the aftermarket radio.

• If your aftermarket radio does not have low level outputs, has only a single RCA output, or the RCA output level is 2 volts or less then it is recommended to connect the level matching circuit to the speaker outputs. If the volume does not go loud enough using the RCA connections, the level matching circuits can be used.

• The internal amplifi er in some radios is not compatible with the level matching circuit. In these cases, there will be fl oor noise (hissing or buzzing at low levels) when the level matching circuit is connected. Change to the RCA connections to eliminate this noise.

TROUBLESHOOTING TIPS:

• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.

• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”

1

Page 108: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

chevRolet tahoe 2007-2011

Automotive Data Solutions Inc. © 2015 5

B

C

A FG

C

AB

G

F

CENTERCENTER

SUBSUB

BACKUP CAMBACKUP CAM

1A

E

E

BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)

WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)

PURPLE/BLACK - RR SPEAKER (-)

YELLOW - 12V (+)

BLACK - GROUNDRED - ACCESSORY (+)

BLUE/WHITE - AMP. TURN ON (+)

PURPLE - RR SPEAKER (+)

ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)

YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED

MAESTRO RR MODULE

MAINHARNESS

RCA CABLES

WIRES FROMVEHICLE

GMS05+ T-HARNESS

FACTORY RADIO HARNESS

SPEAKER

WHITE

OR

WHITE/BLACKGRAYGRAY/BLACKGREENGREEN/BLACK

PURPLE/BLACKPURPLE

STEP 1

STEP 2

STEP 3

STEP 4

SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS

LF SPEAKER

RF SPEAKER

LR SPEAKER

RR SPEAKER

BROWN - MUTE (-)

CONNECT TOAFTERMARKET RADIO

CONNECT TO RADIO WITH LOW LEVEL OUTPUT:

CONNECT TO RADIO WITH HIGH LEVEL OUTPUT:

WIRING DIAGRAM with an Amplifier

STEERING WHEELCONTROL CABLE

Page 109: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

chevRolet tahoe 2007-2011

Automotive Data Solutions Inc. © 2015 6

BACKUP CAMBACKUP CAM

CENTERCENTER

SUBSUB

B

C

A FG

C

AB

G

F

1B

E

E

STEP 1

BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)

MAINHARNESS

RCA CABLES

WIRES FROMVEHICLE

GMS05+ T-HARNESS

FACTORY RADIO HARNESS

(NOT CONNECTED)

(NOT CONNECTED)

WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)

PURPLE/BLACK - RR SPEAKER (-)

YELLOW - 12V (+)

BLACK - GROUNDRED - ACCESSORY (+)

BLUE/WHITE - AMP. TURN ON (+)

PURPLE - RR SPEAKER (+)

STEP 2

STEP 3

STEP 4

SPEAKER

MAESTRO RR MODULE

ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)

YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED

BROWN - MUTE (-)

CONNECT TOAFTERMARKET RADIO

SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS

WIRING DIAGRAM without an Amplifier

CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS

STEERING WHEELCONTROL CABLE

Page 110: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

OPTIONAL ACCESSORIESNone

PROGRAMMED FIRMWAREADS-RR(SR)-GMS05-AS

PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro GM5+ Installation Harness

INSTALL GUIDEChEvROLET TAhOE

WIThOUT NAv 2012-2014Retains steeRing wheel contRols, onstaR, bluetooth and moRe!

NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.

Page 111: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

chevRolet tahoe without nav 2012-2014

Automotive Data Solutions Inc. © 2015 2

WELCOME

NEED hELP?

Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.

Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.

1 866 427-2999

[email protected]

maestro.idatalink.com/supportwww.12voltdata.com/forum

TABLE OF CONTENTS

Before Installing 3

Installation Instructions 4

Wiring Diagram with an Amplifi er 5

Wiring Diagram without an Amplifi er 6

Page 112: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

chevRolet tahoe without nav 2012-2014

Automotive Data Solutions Inc. © 2015 3

BEFORE INSTALLING STEP 1

DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:

METHOD 1: Look for the following logos in the vehicle. They are usually on the speaker covers or on the radio unit. If you fi nd any of the following logos Bose, Pioneer or Monsoon, you have a factory amplifi er.

METHOD 2: Look for the following sticker in the glove box. This sticker will indicate all the Regular Production Option (RPO) codes. If you fi nd any of the following codes UQA, UQS or UQG, you have a factory amplifi er.

STEP 2IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:

Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifi er and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits.

IF YOUR VEHICLE NOT IS EQUIPPED WITH A FACTORY AMPLIFIER:

Follow the installation instructions and complete the installation as shown in the wiring diagram without an amplifi er.

1

SERVICE PARTS IDENTIFICATION DO NOT REMOVE

AGI AG2 AJ1 AL0 AM7 AN3 AU0 AU3 A31 B30 B4UB58 B81 B82 CJ3 C49 C7H DF5 DK7 DL3 DT4 D07EVA E63 FF8 FF9 GT5 G80 JC4 KC4 KNP KUP K34K47 K68 LQ9 M32 NCI NEI NP3 NP5 OSG P30 QSSR4Y R9U R9Z SAF SLM TRB UC6 UK3 UQA U2K UFIUF3 UK3 VR4 VTV VXS V73 XSS X88 YD3 YD6 YE9YSS ZGC ZYI Z60 Z82 ISS ISZ 4IU 6YT 691 6927YT

BC/CC U 8555 692

143 5 FXWH2Q CKI57532GCEK19N031344764

Page 113: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

chevRolet tahoe without nav 2012-2014

Automotive Data Solutions Inc. © 2015 4

INSTALLATION INSTRUCTIONS STEP 1

• Unbox the aftermarket radio and locate its main harness.

• Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.

STEP 2

• Connect the factory harness to the GM5+ T-harness.

STEP 3• Plug the aftermarket radio harnesses into the aftermarket

radio.

• Plug the Data cable to the data port of the aftermarket radio.

• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.

STEP 4• Connect all the harnesses to the Maestro RR module then

proceed to module setup.

The module is now ready to be used.

Insert the aftermarket radio in the dashboard housing and test all the functionalities.

Reassemble the dashboard carefully.

AMPLIFIER ONLYDETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS

• If your vehicle is equipped with a factory amplifi er you can connect the RCA wiring to the low level outputs of your aftermarket radio, or connect the level matching circuits to the speaker outputs of the aftermarket radio.

• If your aftermarket radio does not have low level outputs, has only a single RCA output, or the RCA output level is 2 volts or less then it is recommended to connect the level matching circuit to the speaker outputs. If the volume does not go loud enough using the RCA connections, the level matching circuits can be used.

• The internal amplifi er in some radios is not compatible with the level matching circuit. In these cases, there will be fl oor noise (hissing or buzzing at low levels) when the level matching circuit is connected. Change to the RCA connections to eliminate this noise.

TROUBLESHOOTING TIPS:

• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.

• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”

1

Page 114: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

chevRolet tahoe without nav 2012-2014

Automotive Data Solutions Inc. © 2015 5

B

C

A FG

C

AB

G

F

CENTERCENTER

SUBSUB

BACKUP CAMBACKUP CAM

1A

E

E

BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)

WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)

PURPLE/BLACK - RR SPEAKER (-)

YELLOW - 12V (+)

BLACK - GROUNDRED - ACCESSORY (+)

BLUE/WHITE - AMP. TURN ON (+)

PURPLE - RR SPEAKER (+)

ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)

YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED

MAESTRO RR MODULE

MAINHARNESS

RCA CABLES

WIRES FROMVEHICLE

GMS05+ T-HARNESS

FACTORY RADIO HARNESS

SPEAKER

WHITE

OR

WHITE/BLACKGRAYGRAY/BLACKGREENGREEN/BLACK

PURPLE/BLACKPURPLE

STEP 1

STEP 2

STEP 3

STEP 4

SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS

LF SPEAKER

RF SPEAKER

LR SPEAKER

RR SPEAKER

BROWN - MUTE (-)

CONNECT TOAFTERMARKET RADIO

CONNECT TO RADIO WITH LOW LEVEL OUTPUT:

CONNECT TO RADIO WITH HIGH LEVEL OUTPUT:

WIRING DIAGRAM with an Amplifier

STEERING WHEELCONTROL CABLE

Page 115: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

chevRolet tahoe without nav 2012-2014

Automotive Data Solutions Inc. © 2015 6

BACKUP CAMBACKUP CAM

CENTERCENTER

SUBSUB

B

C

A FG

C

AB

G

F

1B

E

E

STEP 1

BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)

MAINHARNESS

RCA CABLES

WIRES FROMVEHICLE

GMS05+ T-HARNESS

FACTORY RADIO HARNESS

(NOT CONNECTED)

(NOT CONNECTED)

WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)

PURPLE/BLACK - RR SPEAKER (-)

YELLOW - 12V (+)

BLACK - GROUNDRED - ACCESSORY (+)

BLUE/WHITE - AMP. TURN ON (+)

PURPLE - RR SPEAKER (+)

STEP 2

STEP 3

STEP 4

SPEAKER

MAESTRO RR MODULE

ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)

YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED

BROWN - MUTE (-)

CONNECT TOAFTERMARKET RADIO

SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS

WIRING DIAGRAM without an Amplifier

CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS

STEERING WHEELCONTROL CABLE

Page 116: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

OPTIONAL ACCESSORIESNone

PROGRAMMED FIRMWAREADS-RR(SR)-GMS05-AS

PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro GM5+ Installation Harness

INSTALL GUIDEChEvROLET TRAvERSE

2009-2014Retains steeRing wheel contRols, onstaR, bluetooth and moRe!

NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.

Page 117: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

chevRolet tRaveRse 2009-2014

Automotive Data Solutions Inc. © 2015 2

WELCOME

NEED hELP?

Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.

Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.

1 866 427-2999

[email protected]

maestro.idatalink.com/supportwww.12voltdata.com/forum

TABLE OF CONTENTS

Before Installing 3

Installation Instructions 4

Wiring Diagram with an Amplifi er 5

Wiring Diagram without an Amplifi er 6

Page 118: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

chevRolet tRaveRse 2009-2014

Automotive Data Solutions Inc. © 2015 3

BEFORE INSTALLING STEP 1

DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:

METHOD 1: Look for the following logos in the vehicle. They are usually on the speaker covers or on the radio unit. If you fi nd any of the following logos Bose, Pioneer or Monsoon, you have a factory amplifi er.

METHOD 2: Look for the following sticker in the glove box. This sticker will indicate all the Regular Production Option (RPO) codes. If you fi nd any of the following codes UQA, UQS or UQG, you have a factory amplifi er.

STEP 2IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:

Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifi er and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits.

IF YOUR VEHICLE NOT IS EQUIPPED WITH A FACTORY AMPLIFIER:

Follow the installation instructions and complete the installation as shown in the wiring diagram without an amplifi er.

1

SERVICE PARTS IDENTIFICATION DO NOT REMOVE

AGI AG2 AJ1 AL0 AM7 AN3 AU0 AU3 A31 B30 B4UB58 B81 B82 CJ3 C49 C7H DF5 DK7 DL3 DT4 D07EVA E63 FF8 FF9 GT5 G80 JC4 KC4 KNP KUP K34K47 K68 LQ9 M32 NCI NEI NP3 NP5 OSG P30 QSSR4Y R9U R9Z SAF SLM TRB UC6 UK3 UQA U2K UFIUF3 UK3 VR4 VTV VXS V73 XSS X88 YD3 YD6 YE9YSS ZGC ZYI Z60 Z82 ISS ISZ 4IU 6YT 691 6927YT

BC/CC U 8555 692

143 5 FXWH2Q CKI57532GCEK19N031344764

Page 119: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

chevRolet tRaveRse 2009-2014

Automotive Data Solutions Inc. © 2015 4

INSTALLATION INSTRUCTIONS STEP 1

• Unbox the aftermarket radio and locate its main harness.

• Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.

STEP 2

• Connect the factory harness to the GM5+ T-harness.

STEP 3• Plug the aftermarket radio harnesses into the aftermarket

radio.

• Plug the Data cable to the data port of the aftermarket radio.

• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.

STEP 4• Connect all the harnesses to the Maestro RR module then

proceed to module setup.

The module is now ready to be used.

Insert the aftermarket radio in the dashboard housing and test all the functionalities.

Reassemble the dashboard carefully.

AMPLIFIER ONLYDETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS

• If your vehicle is equipped with a factory amplifi er you can connect the RCA wiring to the low level outputs of your aftermarket radio, or connect the level matching circuits to the speaker outputs of the aftermarket radio.

• If your aftermarket radio does not have low level outputs, has only a single RCA output, or the RCA output level is 2 volts or less then it is recommended to connect the level matching circuit to the speaker outputs. If the volume does not go loud enough using the RCA connections, the level matching circuits can be used.

• The internal amplifi er in some radios is not compatible with the level matching circuit. In these cases, there will be fl oor noise (hissing or buzzing at low levels) when the level matching circuit is connected. Change to the RCA connections to eliminate this noise.

TROUBLESHOOTING TIPS:

• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.

• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”

1

Page 120: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

chevRolet tRaveRse 2009-2014

Automotive Data Solutions Inc. © 2015 5

B

C

A FG

C

AB

G

F

CENTERCENTER

SUBSUB

BACKUP CAMBACKUP CAM

1A

E

E

BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)

WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)

PURPLE/BLACK - RR SPEAKER (-)

YELLOW - 12V (+)

BLACK - GROUNDRED - ACCESSORY (+)

BLUE/WHITE - AMP. TURN ON (+)

PURPLE - RR SPEAKER (+)

ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)

YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED

MAESTRO RR MODULE

MAINHARNESS

RCA CABLES

WIRES FROMVEHICLE

GMS05+ T-HARNESS

FACTORY RADIO HARNESS

SPEAKER

WHITE

OR

WHITE/BLACKGRAYGRAY/BLACKGREENGREEN/BLACK

PURPLE/BLACKPURPLE

STEP 1

STEP 2

STEP 3

STEP 4

SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS

LF SPEAKER

RF SPEAKER

LR SPEAKER

RR SPEAKER

BROWN - MUTE (-)

CONNECT TOAFTERMARKET RADIO

CONNECT TO RADIO WITH LOW LEVEL OUTPUT:

CONNECT TO RADIO WITH HIGH LEVEL OUTPUT:

WIRING DIAGRAM with an Amplifier

STEERING WHEELCONTROL CABLE

Page 121: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

chevRolet tRaveRse 2009-2014

Automotive Data Solutions Inc. © 2015 6

BACKUP CAMBACKUP CAM

CENTERCENTER

SUBSUB

B

C

A FG

C

AB

G

F

1B

E

E

STEP 1

BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)

MAINHARNESS

RCA CABLES

WIRES FROMVEHICLE

GMS05+ T-HARNESS

FACTORY RADIO HARNESS

(NOT CONNECTED)

(NOT CONNECTED)

WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)

PURPLE/BLACK - RR SPEAKER (-)

YELLOW - 12V (+)

BLACK - GROUNDRED - ACCESSORY (+)

BLUE/WHITE - AMP. TURN ON (+)

PURPLE - RR SPEAKER (+)

STEP 2

STEP 3

STEP 4

SPEAKER

MAESTRO RR MODULE

ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)

YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED

BROWN - MUTE (-)

CONNECT TOAFTERMARKET RADIO

SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS

WIRING DIAGRAM without an Amplifier

CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS

STEERING WHEELCONTROL CABLE

Page 122: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

OPTIONAL ACCESSORIESNone

PROGRAMMED FIRMWAREADS-RR(SR)-GMS05-AS

PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro GM5+ Installation Harness

INSTALL GUIDEGMC ACADIA 2007-2014

Retains steeRing wheel contRols, onstaR, bluetooth and moRe!

NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.

Page 123: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

gmc acadia 2007-2014

Automotive Data Solutions Inc. © 2015 2

WELCOME

NEED hELP?

Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.

Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.

1 866 427-2999

[email protected]

maestro.idatalink.com/supportwww.12voltdata.com/forum

TABLE OF CONTENTS

Before Installing 3

Installation Instructions 4

Wiring Diagram with an Amplifi er 5

Wiring Diagram without an Amplifi er 6

Page 124: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

gmc acadia 2007-2014

Automotive Data Solutions Inc. © 2015 3

BEFORE INSTALLING STEP 1

DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:

METHOD 1: Look for the following logos in the vehicle. They are usually on the speaker covers or on the radio unit. If you fi nd any of the following logos Bose, Pioneer or Monsoon, you have a factory amplifi er.

METHOD 2: Look for the following sticker in the glove box. This sticker will indicate all the Regular Production Option (RPO) codes. If you fi nd any of the following codes UQA, UQS or UQG, you have a factory amplifi er.

STEP 2IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:

Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifi er and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits.

IF YOUR VEHICLE NOT IS EQUIPPED WITH A FACTORY AMPLIFIER:

Follow the installation instructions and complete the installation as shown in the wiring diagram without an amplifi er.

1

SERVICE PARTS IDENTIFICATION DO NOT REMOVE

AGI AG2 AJ1 AL0 AM7 AN3 AU0 AU3 A31 B30 B4UB58 B81 B82 CJ3 C49 C7H DF5 DK7 DL3 DT4 D07EVA E63 FF8 FF9 GT5 G80 JC4 KC4 KNP KUP K34K47 K68 LQ9 M32 NCI NEI NP3 NP5 OSG P30 QSSR4Y R9U R9Z SAF SLM TRB UC6 UK3 UQA U2K UFIUF3 UK3 VR4 VTV VXS V73 XSS X88 YD3 YD6 YE9YSS ZGC ZYI Z60 Z82 ISS ISZ 4IU 6YT 691 6927YT

BC/CC U 8555 692

143 5 FXWH2Q CKI57532GCEK19N031344764

Page 125: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

gmc acadia 2007-2014

Automotive Data Solutions Inc. © 2015 4

INSTALLATION INSTRUCTIONS STEP 1

• Unbox the aftermarket radio and locate its main harness.

• Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.

STEP 2

• Connect the factory harness to the GM5+ T-harness.

STEP 3• Plug the aftermarket radio harnesses into the aftermarket

radio.

• Plug the Data cable to the data port of the aftermarket radio.

• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.

STEP 4• Connect all the harnesses to the Maestro RR module then

proceed to module setup.

The module is now ready to be used.

Insert the aftermarket radio in the dashboard housing and test all the functionalities.

Reassemble the dashboard carefully.

AMPLIFIER ONLYDETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS

• If your vehicle is equipped with a factory amplifi er you can connect the RCA wiring to the low level outputs of your aftermarket radio, or connect the level matching circuits to the speaker outputs of the aftermarket radio.

• If your aftermarket radio does not have low level outputs, has only a single RCA output, or the RCA output level is 2 volts or less then it is recommended to connect the level matching circuit to the speaker outputs. If the volume does not go loud enough using the RCA connections, the level matching circuits can be used.

• The internal amplifi er in some radios is not compatible with the level matching circuit. In these cases, there will be fl oor noise (hissing or buzzing at low levels) when the level matching circuit is connected. Change to the RCA connections to eliminate this noise.

TROUBLESHOOTING TIPS:

• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.

• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”

1

Page 126: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

gmc acadia 2007-2014

Automotive Data Solutions Inc. © 2015 5

B

C

A FG

C

AB

G

F

CENTERCENTER

SUBSUB

BACKUP CAMBACKUP CAM

1A

E

E

BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)

WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)

PURPLE/BLACK - RR SPEAKER (-)

YELLOW - 12V (+)

BLACK - GROUNDRED - ACCESSORY (+)

BLUE/WHITE - AMP. TURN ON (+)

PURPLE - RR SPEAKER (+)

ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)

YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED

MAESTRO RR MODULE

MAINHARNESS

RCA CABLES

WIRES FROMVEHICLE

GMS05+ T-HARNESS

FACTORY RADIO HARNESS

SPEAKER

WHITE

OR

WHITE/BLACKGRAYGRAY/BLACKGREENGREEN/BLACK

PURPLE/BLACKPURPLE

STEP 1

STEP 2

STEP 3

STEP 4

SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS

LF SPEAKER

RF SPEAKER

LR SPEAKER

RR SPEAKER

BROWN - MUTE (-)

CONNECT TOAFTERMARKET RADIO

CONNECT TO RADIO WITH LOW LEVEL OUTPUT:

CONNECT TO RADIO WITH HIGH LEVEL OUTPUT:

WIRING DIAGRAM with an Amplifier

STEERING WHEELCONTROL CABLE

Page 127: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

gmc acadia 2007-2014

Automotive Data Solutions Inc. © 2015 6

BACKUP CAMBACKUP CAM

CENTERCENTER

SUBSUB

B

C

A FG

C

AB

G

F

1B

E

E

STEP 1

BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)

MAINHARNESS

RCA CABLES

WIRES FROMVEHICLE

GMS05+ T-HARNESS

FACTORY RADIO HARNESS

(NOT CONNECTED)

(NOT CONNECTED)

WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)

PURPLE/BLACK - RR SPEAKER (-)

YELLOW - 12V (+)

BLACK - GROUNDRED - ACCESSORY (+)

BLUE/WHITE - AMP. TURN ON (+)

PURPLE - RR SPEAKER (+)

STEP 2

STEP 3

STEP 4

SPEAKER

MAESTRO RR MODULE

ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)

YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED

BROWN - MUTE (-)

CONNECT TOAFTERMARKET RADIO

SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS

WIRING DIAGRAM without an Amplifier

CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS

STEERING WHEELCONTROL CABLE

Page 128: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

OPTIONAL ACCESSORIESNone

PROGRAMMED FIRMWAREADS-RR(SR)-GMS05-AS

PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro GM5+ Installation Harness

INSTALL GUIDEGMC SAvANA 2008-2014

Retains steeRing wheel contRols, onstaR, bluetooth and moRe!

NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.

Page 129: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

gmc savana 2008-2014

Automotive Data Solutions Inc. © 2015 2

WELCOME

NEED hELP?

Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.

Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.

1 866 427-2999

[email protected]

maestro.idatalink.com/supportwww.12voltdata.com/forum

TABLE OF CONTENTS

Before Installing 3

Installation Instructions 4

Wiring Diagram with an Amplifi er 5

Wiring Diagram without an Amplifi er 6

Page 130: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

gmc savana 2008-2014

Automotive Data Solutions Inc. © 2015 3

BEFORE INSTALLING STEP 1

DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:

METHOD 1: Look for the following logos in the vehicle. They are usually on the speaker covers or on the radio unit. If you fi nd any of the following logos Bose, Pioneer or Monsoon, you have a factory amplifi er.

METHOD 2: Look for the following sticker in the glove box. This sticker will indicate all the Regular Production Option (RPO) codes. If you fi nd any of the following codes UQA, UQS or UQG, you have a factory amplifi er.

STEP 2IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:

Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifi er and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits.

IF YOUR VEHICLE NOT IS EQUIPPED WITH A FACTORY AMPLIFIER:

Follow the installation instructions and complete the installation as shown in the wiring diagram without an amplifi er.

1

SERVICE PARTS IDENTIFICATION DO NOT REMOVE

AGI AG2 AJ1 AL0 AM7 AN3 AU0 AU3 A31 B30 B4UB58 B81 B82 CJ3 C49 C7H DF5 DK7 DL3 DT4 D07EVA E63 FF8 FF9 GT5 G80 JC4 KC4 KNP KUP K34K47 K68 LQ9 M32 NCI NEI NP3 NP5 OSG P30 QSSR4Y R9U R9Z SAF SLM TRB UC6 UK3 UQA U2K UFIUF3 UK3 VR4 VTV VXS V73 XSS X88 YD3 YD6 YE9YSS ZGC ZYI Z60 Z82 ISS ISZ 4IU 6YT 691 6927YT

BC/CC U 8555 692

143 5 FXWH2Q CKI57532GCEK19N031344764

Page 131: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

gmc savana 2008-2014

Automotive Data Solutions Inc. © 2015 4

INSTALLATION INSTRUCTIONS STEP 1

• Unbox the aftermarket radio and locate its main harness.

• Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.

STEP 2

• Connect the factory harness to the GM5+ T-harness.

STEP 3• Plug the aftermarket radio harnesses into the aftermarket

radio.

• Plug the Data cable to the data port of the aftermarket radio.

• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.

STEP 4• Connect all the harnesses to the Maestro RR module then

proceed to module setup.

The module is now ready to be used.

Insert the aftermarket radio in the dashboard housing and test all the functionalities.

Reassemble the dashboard carefully.

AMPLIFIER ONLYDETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS

• If your vehicle is equipped with a factory amplifi er you can connect the RCA wiring to the low level outputs of your aftermarket radio, or connect the level matching circuits to the speaker outputs of the aftermarket radio.

• If your aftermarket radio does not have low level outputs, has only a single RCA output, or the RCA output level is 2 volts or less then it is recommended to connect the level matching circuit to the speaker outputs. If the volume does not go loud enough using the RCA connections, the level matching circuits can be used.

• The internal amplifi er in some radios is not compatible with the level matching circuit. In these cases, there will be fl oor noise (hissing or buzzing at low levels) when the level matching circuit is connected. Change to the RCA connections to eliminate this noise.

TROUBLESHOOTING TIPS:

• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.

• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”

1

Page 132: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

gmc savana 2008-2014

Automotive Data Solutions Inc. © 2015 5

B

C

A FG

C

AB

G

F

CENTERCENTER

SUBSUB

BACKUP CAMBACKUP CAM

1A

E

E

BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)

WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)

PURPLE/BLACK - RR SPEAKER (-)

YELLOW - 12V (+)

BLACK - GROUNDRED - ACCESSORY (+)

BLUE/WHITE - AMP. TURN ON (+)

PURPLE - RR SPEAKER (+)

ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)

YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED

MAESTRO RR MODULE

MAINHARNESS

RCA CABLES

WIRES FROMVEHICLE

GMS05+ T-HARNESS

FACTORY RADIO HARNESS

SPEAKER

WHITE

OR

WHITE/BLACKGRAYGRAY/BLACKGREENGREEN/BLACK

PURPLE/BLACKPURPLE

STEP 1

STEP 2

STEP 3

STEP 4

SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS

LF SPEAKER

RF SPEAKER

LR SPEAKER

RR SPEAKER

BROWN - MUTE (-)

CONNECT TOAFTERMARKET RADIO

CONNECT TO RADIO WITH LOW LEVEL OUTPUT:

CONNECT TO RADIO WITH HIGH LEVEL OUTPUT:

WIRING DIAGRAM with an Amplifier

STEERING WHEELCONTROL CABLE

Page 133: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

gmc savana 2008-2014

Automotive Data Solutions Inc. © 2015 6

BACKUP CAMBACKUP CAM

CENTERCENTER

SUBSUB

B

C

A FG

C

AB

G

F

1B

E

E

STEP 1

BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)

MAINHARNESS

RCA CABLES

WIRES FROMVEHICLE

GMS05+ T-HARNESS

FACTORY RADIO HARNESS

(NOT CONNECTED)

(NOT CONNECTED)

WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)

PURPLE/BLACK - RR SPEAKER (-)

YELLOW - 12V (+)

BLACK - GROUNDRED - ACCESSORY (+)

BLUE/WHITE - AMP. TURN ON (+)

PURPLE - RR SPEAKER (+)

STEP 2

STEP 3

STEP 4

SPEAKER

MAESTRO RR MODULE

ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)

YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED

BROWN - MUTE (-)

CONNECT TOAFTERMARKET RADIO

SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS

WIRING DIAGRAM without an Amplifier

CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS

STEERING WHEELCONTROL CABLE

Page 134: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

OPTIONAL ACCESSORIESNone

PROGRAMMED FIRMWAREADS-RR(SR)-GMS05-AS

PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro GM5+ Installation Harness

INSTALL GUIDEGMC SIERRA 1500

2007-2011Retains steeRing wheel contRols, onstaR, bluetooth and moRe!

NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.

Page 135: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

gmc sieRRa 1500 2007-2011

Automotive Data Solutions Inc. © 2015 2

WELCOME

NEED hELP?

Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.

Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.

1 866 427-2999

[email protected]

maestro.idatalink.com/supportwww.12voltdata.com/forum

TABLE OF CONTENTS

Before Installing 3

Installation Instructions 4

Wiring Diagram with an Amplifi er 5

Wiring Diagram without an Amplifi er 6

Page 136: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

gmc sieRRa 1500 2007-2011

Automotive Data Solutions Inc. © 2015 3

BEFORE INSTALLING STEP 1

DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:

METHOD 1: Look for the following logos in the vehicle. They are usually on the speaker covers or on the radio unit. If you fi nd any of the following logos Bose, Pioneer or Monsoon, you have a factory amplifi er.

METHOD 2: Look for the following sticker in the glove box. This sticker will indicate all the Regular Production Option (RPO) codes. If you fi nd any of the following codes UQA, UQS or UQG, you have a factory amplifi er.

STEP 2IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:

Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifi er and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits.

IF YOUR VEHICLE NOT IS EQUIPPED WITH A FACTORY AMPLIFIER:

Follow the installation instructions and complete the installation as shown in the wiring diagram without an amplifi er.

1

SERVICE PARTS IDENTIFICATION DO NOT REMOVE

AGI AG2 AJ1 AL0 AM7 AN3 AU0 AU3 A31 B30 B4UB58 B81 B82 CJ3 C49 C7H DF5 DK7 DL3 DT4 D07EVA E63 FF8 FF9 GT5 G80 JC4 KC4 KNP KUP K34K47 K68 LQ9 M32 NCI NEI NP3 NP5 OSG P30 QSSR4Y R9U R9Z SAF SLM TRB UC6 UK3 UQA U2K UFIUF3 UK3 VR4 VTV VXS V73 XSS X88 YD3 YD6 YE9YSS ZGC ZYI Z60 Z82 ISS ISZ 4IU 6YT 691 6927YT

BC/CC U 8555 692

143 5 FXWH2Q CKI57532GCEK19N031344764

Page 137: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

gmc sieRRa 1500 2007-2011

Automotive Data Solutions Inc. © 2015 4

INSTALLATION INSTRUCTIONS STEP 1

• Unbox the aftermarket radio and locate its main harness.

• Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.

STEP 2

• Connect the factory harness to the GM5+ T-harness.

STEP 3• Plug the aftermarket radio harnesses into the aftermarket

radio.

• Plug the Data cable to the data port of the aftermarket radio.

• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.

STEP 4• Connect all the harnesses to the Maestro RR module then

proceed to module setup.

The module is now ready to be used.

Insert the aftermarket radio in the dashboard housing and test all the functionalities.

Reassemble the dashboard carefully.

AMPLIFIER ONLYDETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS

• If your vehicle is equipped with a factory amplifi er you can connect the RCA wiring to the low level outputs of your aftermarket radio, or connect the level matching circuits to the speaker outputs of the aftermarket radio.

• If your aftermarket radio does not have low level outputs, has only a single RCA output, or the RCA output level is 2 volts or less then it is recommended to connect the level matching circuit to the speaker outputs. If the volume does not go loud enough using the RCA connections, the level matching circuits can be used.

• The internal amplifi er in some radios is not compatible with the level matching circuit. In these cases, there will be fl oor noise (hissing or buzzing at low levels) when the level matching circuit is connected. Change to the RCA connections to eliminate this noise.

TROUBLESHOOTING TIPS:

• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.

• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”

1

Page 138: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

gmc sieRRa 1500 2007-2011

Automotive Data Solutions Inc. © 2015 5

B

C

A FG

C

AB

G

F

CENTERCENTER

SUBSUB

BACKUP CAMBACKUP CAM

1A

E

E

BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)

WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)

PURPLE/BLACK - RR SPEAKER (-)

YELLOW - 12V (+)

BLACK - GROUNDRED - ACCESSORY (+)

BLUE/WHITE - AMP. TURN ON (+)

PURPLE - RR SPEAKER (+)

ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)

YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED

MAESTRO RR MODULE

MAINHARNESS

RCA CABLES

WIRES FROMVEHICLE

GMS05+ T-HARNESS

FACTORY RADIO HARNESS

SPEAKER

WHITE

OR

WHITE/BLACKGRAYGRAY/BLACKGREENGREEN/BLACK

PURPLE/BLACKPURPLE

STEP 1

STEP 2

STEP 3

STEP 4

SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS

LF SPEAKER

RF SPEAKER

LR SPEAKER

RR SPEAKER

BROWN - MUTE (-)

CONNECT TOAFTERMARKET RADIO

CONNECT TO RADIO WITH LOW LEVEL OUTPUT:

CONNECT TO RADIO WITH HIGH LEVEL OUTPUT:

WIRING DIAGRAM with an Amplifier

STEERING WHEELCONTROL CABLE

Page 139: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

gmc sieRRa 1500 2007-2011

Automotive Data Solutions Inc. © 2015 6

BACKUP CAMBACKUP CAM

CENTERCENTER

SUBSUB

B

C

A FG

C

AB

G

F

1B

E

E

STEP 1

BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)

MAINHARNESS

RCA CABLES

WIRES FROMVEHICLE

GMS05+ T-HARNESS

FACTORY RADIO HARNESS

(NOT CONNECTED)

(NOT CONNECTED)

WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)

PURPLE/BLACK - RR SPEAKER (-)

YELLOW - 12V (+)

BLACK - GROUNDRED - ACCESSORY (+)

BLUE/WHITE - AMP. TURN ON (+)

PURPLE - RR SPEAKER (+)

STEP 2

STEP 3

STEP 4

SPEAKER

MAESTRO RR MODULE

ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)

YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED

BROWN - MUTE (-)

CONNECT TOAFTERMARKET RADIO

SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS

WIRING DIAGRAM without an Amplifier

CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS

STEERING WHEELCONTROL CABLE

Page 140: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

OPTIONAL ACCESSORIESNone

PROGRAMMED FIRMWAREADS-RR(SR)-GMS05-AS

PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro GM5+ Installation Harness

INSTALL GUIDEGMC SIERRA 1500

WIThOUT NAv 2012-2014Retains steeRing wheel contRols, onstaR, bluetooth and moRe!

NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.

Page 141: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

gmc sieRRa 1500 without nav 2012-2014

Automotive Data Solutions Inc. © 2015 2

WELCOME

NEED hELP?

Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.

Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.

1 866 427-2999

[email protected]

maestro.idatalink.com/supportwww.12voltdata.com/forum

TABLE OF CONTENTS

Before Installing 3

Installation Instructions 4

Wiring Diagram with an Amplifi er 5

Wiring Diagram without an Amplifi er 6

Page 142: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

gmc sieRRa 1500 without nav 2012-2014

Automotive Data Solutions Inc. © 2015 3

BEFORE INSTALLING STEP 1

DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:

METHOD 1: Look for the following logos in the vehicle. They are usually on the speaker covers or on the radio unit. If you fi nd any of the following logos Bose, Pioneer or Monsoon, you have a factory amplifi er.

METHOD 2: Look for the following sticker in the glove box. This sticker will indicate all the Regular Production Option (RPO) codes. If you fi nd any of the following codes UQA, UQS or UQG, you have a factory amplifi er.

STEP 2IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:

Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifi er and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits.

IF YOUR VEHICLE NOT IS EQUIPPED WITH A FACTORY AMPLIFIER:

Follow the installation instructions and complete the installation as shown in the wiring diagram without an amplifi er.

1

SERVICE PARTS IDENTIFICATION DO NOT REMOVE

AGI AG2 AJ1 AL0 AM7 AN3 AU0 AU3 A31 B30 B4UB58 B81 B82 CJ3 C49 C7H DF5 DK7 DL3 DT4 D07EVA E63 FF8 FF9 GT5 G80 JC4 KC4 KNP KUP K34K47 K68 LQ9 M32 NCI NEI NP3 NP5 OSG P30 QSSR4Y R9U R9Z SAF SLM TRB UC6 UK3 UQA U2K UFIUF3 UK3 VR4 VTV VXS V73 XSS X88 YD3 YD6 YE9YSS ZGC ZYI Z60 Z82 ISS ISZ 4IU 6YT 691 6927YT

BC/CC U 8555 692

143 5 FXWH2Q CKI57532GCEK19N031344764

Page 143: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

gmc sieRRa 1500 without nav 2012-2014

Automotive Data Solutions Inc. © 2015 4

INSTALLATION INSTRUCTIONS STEP 1

• Unbox the aftermarket radio and locate its main harness.

• Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.

STEP 2

• Connect the factory harness to the GM5+ T-harness.

STEP 3• Plug the aftermarket radio harnesses into the aftermarket

radio.

• Plug the Data cable to the data port of the aftermarket radio.

• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.

STEP 4• Connect all the harnesses to the Maestro RR module then

proceed to module setup.

The module is now ready to be used.

Insert the aftermarket radio in the dashboard housing and test all the functionalities.

Reassemble the dashboard carefully.

AMPLIFIER ONLYDETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS

• If your vehicle is equipped with a factory amplifi er you can connect the RCA wiring to the low level outputs of your aftermarket radio, or connect the level matching circuits to the speaker outputs of the aftermarket radio.

• If your aftermarket radio does not have low level outputs, has only a single RCA output, or the RCA output level is 2 volts or less then it is recommended to connect the level matching circuit to the speaker outputs. If the volume does not go loud enough using the RCA connections, the level matching circuits can be used.

• The internal amplifi er in some radios is not compatible with the level matching circuit. In these cases, there will be fl oor noise (hissing or buzzing at low levels) when the level matching circuit is connected. Change to the RCA connections to eliminate this noise.

TROUBLESHOOTING TIPS:

• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.

• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”

1

Page 144: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

gmc sieRRa 1500 without nav 2012-2014

Automotive Data Solutions Inc. © 2015 5

B

C

A FG

C

AB

G

F

CENTERCENTER

SUBSUB

BACKUP CAMBACKUP CAM

1A

E

E

BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)

WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)

PURPLE/BLACK - RR SPEAKER (-)

YELLOW - 12V (+)

BLACK - GROUNDRED - ACCESSORY (+)

BLUE/WHITE - AMP. TURN ON (+)

PURPLE - RR SPEAKER (+)

ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)

YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED

MAESTRO RR MODULE

MAINHARNESS

RCA CABLES

WIRES FROMVEHICLE

GMS05+ T-HARNESS

FACTORY RADIO HARNESS

SPEAKER

WHITE

OR

WHITE/BLACKGRAYGRAY/BLACKGREENGREEN/BLACK

PURPLE/BLACKPURPLE

STEP 1

STEP 2

STEP 3

STEP 4

SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS

LF SPEAKER

RF SPEAKER

LR SPEAKER

RR SPEAKER

BROWN - MUTE (-)

CONNECT TOAFTERMARKET RADIO

CONNECT TO RADIO WITH LOW LEVEL OUTPUT:

CONNECT TO RADIO WITH HIGH LEVEL OUTPUT:

WIRING DIAGRAM with an Amplifier

STEERING WHEELCONTROL CABLE

Page 145: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

gmc sieRRa 1500 without nav 2012-2014

Automotive Data Solutions Inc. © 2015 6

BACKUP CAMBACKUP CAM

CENTERCENTER

SUBSUB

B

C

A FG

C

AB

G

F

1B

E

E

STEP 1

BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)

MAINHARNESS

RCA CABLES

WIRES FROMVEHICLE

GMS05+ T-HARNESS

FACTORY RADIO HARNESS

(NOT CONNECTED)

(NOT CONNECTED)

WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)

PURPLE/BLACK - RR SPEAKER (-)

YELLOW - 12V (+)

BLACK - GROUNDRED - ACCESSORY (+)

BLUE/WHITE - AMP. TURN ON (+)

PURPLE - RR SPEAKER (+)

STEP 2

STEP 3

STEP 4

SPEAKER

MAESTRO RR MODULE

ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)

YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED

BROWN - MUTE (-)

CONNECT TOAFTERMARKET RADIO

SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS

WIRING DIAGRAM without an Amplifier

CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS

STEERING WHEELCONTROL CABLE

Page 146: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

OPTIONAL ACCESSORIESNone

PROGRAMMED FIRMWAREADS-RR(SR)-GMS05-AS

PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro GM5+ Installation Harness

INSTALL GUIDEGMC SIERRA 2500 & 3500

2007-2011Retains steeRing wheel contRols, onstaR, bluetooth and moRe!

NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.

Page 147: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

gmc sieRRa 2500 & 3500 2007-2011

Automotive Data Solutions Inc. © 2015 2

WELCOME

NEED hELP?

Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.

Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.

1 866 427-2999

[email protected]

maestro.idatalink.com/supportwww.12voltdata.com/forum

TABLE OF CONTENTS

Before Installing 3

Installation Instructions 4

Wiring Diagram with an Amplifi er 5

Wiring Diagram without an Amplifi er 6

Page 148: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

gmc sieRRa 2500 & 3500 2007-2011

Automotive Data Solutions Inc. © 2015 3

BEFORE INSTALLING STEP 1

DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:

METHOD 1: Look for the following logos in the vehicle. They are usually on the speaker covers or on the radio unit. If you fi nd any of the following logos Bose, Pioneer or Monsoon, you have a factory amplifi er.

METHOD 2: Look for the following sticker in the glove box. This sticker will indicate all the Regular Production Option (RPO) codes. If you fi nd any of the following codes UQA, UQS or UQG, you have a factory amplifi er.

STEP 2IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:

Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifi er and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits.

IF YOUR VEHICLE NOT IS EQUIPPED WITH A FACTORY AMPLIFIER:

Follow the installation instructions and complete the installation as shown in the wiring diagram without an amplifi er.

1

SERVICE PARTS IDENTIFICATION DO NOT REMOVE

AGI AG2 AJ1 AL0 AM7 AN3 AU0 AU3 A31 B30 B4UB58 B81 B82 CJ3 C49 C7H DF5 DK7 DL3 DT4 D07EVA E63 FF8 FF9 GT5 G80 JC4 KC4 KNP KUP K34K47 K68 LQ9 M32 NCI NEI NP3 NP5 OSG P30 QSSR4Y R9U R9Z SAF SLM TRB UC6 UK3 UQA U2K UFIUF3 UK3 VR4 VTV VXS V73 XSS X88 YD3 YD6 YE9YSS ZGC ZYI Z60 Z82 ISS ISZ 4IU 6YT 691 6927YT

BC/CC U 8555 692

143 5 FXWH2Q CKI57532GCEK19N031344764

Page 149: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

gmc sieRRa 2500 & 3500 2007-2011

Automotive Data Solutions Inc. © 2015 4

INSTALLATION INSTRUCTIONS STEP 1

• Unbox the aftermarket radio and locate its main harness.

• Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.

STEP 2

• Connect the factory harness to the GM5+ T-harness.

STEP 3• Plug the aftermarket radio harnesses into the aftermarket

radio.

• Plug the Data cable to the data port of the aftermarket radio.

• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.

STEP 4• Connect all the harnesses to the Maestro RR module then

proceed to module setup.

The module is now ready to be used.

Insert the aftermarket radio in the dashboard housing and test all the functionalities.

Reassemble the dashboard carefully.

AMPLIFIER ONLYDETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS

• If your vehicle is equipped with a factory amplifi er you can connect the RCA wiring to the low level outputs of your aftermarket radio, or connect the level matching circuits to the speaker outputs of the aftermarket radio.

• If your aftermarket radio does not have low level outputs, has only a single RCA output, or the RCA output level is 2 volts or less then it is recommended to connect the level matching circuit to the speaker outputs. If the volume does not go loud enough using the RCA connections, the level matching circuits can be used.

• The internal amplifi er in some radios is not compatible with the level matching circuit. In these cases, there will be fl oor noise (hissing or buzzing at low levels) when the level matching circuit is connected. Change to the RCA connections to eliminate this noise.

TROUBLESHOOTING TIPS:

• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.

• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”

1

Page 150: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

gmc sieRRa 2500 & 3500 2007-2011

Automotive Data Solutions Inc. © 2015 5

B

C

A FG

C

AB

G

F

CENTERCENTER

SUBSUB

BACKUP CAMBACKUP CAM

1A

E

E

BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)

WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)

PURPLE/BLACK - RR SPEAKER (-)

YELLOW - 12V (+)

BLACK - GROUNDRED - ACCESSORY (+)

BLUE/WHITE - AMP. TURN ON (+)

PURPLE - RR SPEAKER (+)

ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)

YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED

MAESTRO RR MODULE

MAINHARNESS

RCA CABLES

WIRES FROMVEHICLE

GMS05+ T-HARNESS

FACTORY RADIO HARNESS

SPEAKER

WHITE

OR

WHITE/BLACKGRAYGRAY/BLACKGREENGREEN/BLACK

PURPLE/BLACKPURPLE

STEP 1

STEP 2

STEP 3

STEP 4

SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS

LF SPEAKER

RF SPEAKER

LR SPEAKER

RR SPEAKER

BROWN - MUTE (-)

CONNECT TOAFTERMARKET RADIO

CONNECT TO RADIO WITH LOW LEVEL OUTPUT:

CONNECT TO RADIO WITH HIGH LEVEL OUTPUT:

WIRING DIAGRAM with an Amplifier

STEERING WHEELCONTROL CABLE

Page 151: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

gmc sieRRa 2500 & 3500 2007-2011

Automotive Data Solutions Inc. © 2015 6

BACKUP CAMBACKUP CAM

CENTERCENTER

SUBSUB

B

C

A FG

C

AB

G

F

1B

E

E

STEP 1

BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)

MAINHARNESS

RCA CABLES

WIRES FROMVEHICLE

GMS05+ T-HARNESS

FACTORY RADIO HARNESS

(NOT CONNECTED)

(NOT CONNECTED)

WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)

PURPLE/BLACK - RR SPEAKER (-)

YELLOW - 12V (+)

BLACK - GROUNDRED - ACCESSORY (+)

BLUE/WHITE - AMP. TURN ON (+)

PURPLE - RR SPEAKER (+)

STEP 2

STEP 3

STEP 4

SPEAKER

MAESTRO RR MODULE

ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)

YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED

BROWN - MUTE (-)

CONNECT TOAFTERMARKET RADIO

SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS

WIRING DIAGRAM without an Amplifier

CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS

STEERING WHEELCONTROL CABLE

Page 152: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

OPTIONAL ACCESSORIESNone

PROGRAMMED FIRMWAREADS-RR(SR)-GMS05-AS

PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro GM5+ Installation Harness

INSTALL GUIDEGMC SIERRA 2500 & 3500WIThOUT NAv 2012-2014

Retains steeRing wheel contRols, onstaR, bluetooth and moRe!

NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.

Page 153: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

gmc sieRRa 2500 & 3500 without nav 2012-2014

Automotive Data Solutions Inc. © 2015 2

WELCOME

NEED hELP?

Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.

Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.

1 866 427-2999

[email protected]

maestro.idatalink.com/supportwww.12voltdata.com/forum

TABLE OF CONTENTS

Before Installing 3

Installation Instructions 4

Wiring Diagram with an Amplifi er 5

Wiring Diagram without an Amplifi er 6

Page 154: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

gmc sieRRa 2500 & 3500 without nav 2012-2014

Automotive Data Solutions Inc. © 2015 3

BEFORE INSTALLING STEP 1

DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:

METHOD 1: Look for the following logos in the vehicle. They are usually on the speaker covers or on the radio unit. If you fi nd any of the following logos Bose, Pioneer or Monsoon, you have a factory amplifi er.

METHOD 2: Look for the following sticker in the glove box. This sticker will indicate all the Regular Production Option (RPO) codes. If you fi nd any of the following codes UQA, UQS or UQG, you have a factory amplifi er.

STEP 2IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:

Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifi er and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits.

IF YOUR VEHICLE NOT IS EQUIPPED WITH A FACTORY AMPLIFIER:

Follow the installation instructions and complete the installation as shown in the wiring diagram without an amplifi er.

1

SERVICE PARTS IDENTIFICATION DO NOT REMOVE

AGI AG2 AJ1 AL0 AM7 AN3 AU0 AU3 A31 B30 B4UB58 B81 B82 CJ3 C49 C7H DF5 DK7 DL3 DT4 D07EVA E63 FF8 FF9 GT5 G80 JC4 KC4 KNP KUP K34K47 K68 LQ9 M32 NCI NEI NP3 NP5 OSG P30 QSSR4Y R9U R9Z SAF SLM TRB UC6 UK3 UQA U2K UFIUF3 UK3 VR4 VTV VXS V73 XSS X88 YD3 YD6 YE9YSS ZGC ZYI Z60 Z82 ISS ISZ 4IU 6YT 691 6927YT

BC/CC U 8555 692

143 5 FXWH2Q CKI57532GCEK19N031344764

Page 155: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

gmc sieRRa 2500 & 3500 without nav 2012-2014

Automotive Data Solutions Inc. © 2015 4

INSTALLATION INSTRUCTIONS STEP 1

• Unbox the aftermarket radio and locate its main harness.

• Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.

STEP 2

• Connect the factory harness to the GM5+ T-harness.

STEP 3• Plug the aftermarket radio harnesses into the aftermarket

radio.

• Plug the Data cable to the data port of the aftermarket radio.

• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.

STEP 4• Connect all the harnesses to the Maestro RR module then

proceed to module setup.

The module is now ready to be used.

Insert the aftermarket radio in the dashboard housing and test all the functionalities.

Reassemble the dashboard carefully.

AMPLIFIER ONLYDETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS

• If your vehicle is equipped with a factory amplifi er you can connect the RCA wiring to the low level outputs of your aftermarket radio, or connect the level matching circuits to the speaker outputs of the aftermarket radio.

• If your aftermarket radio does not have low level outputs, has only a single RCA output, or the RCA output level is 2 volts or less then it is recommended to connect the level matching circuit to the speaker outputs. If the volume does not go loud enough using the RCA connections, the level matching circuits can be used.

• The internal amplifi er in some radios is not compatible with the level matching circuit. In these cases, there will be fl oor noise (hissing or buzzing at low levels) when the level matching circuit is connected. Change to the RCA connections to eliminate this noise.

TROUBLESHOOTING TIPS:

• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.

• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”

1

Page 156: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

gmc sieRRa 2500 & 3500 without nav 2012-2014

Automotive Data Solutions Inc. © 2015 5

B

C

A FG

C

AB

G

F

CENTERCENTER

SUBSUB

BACKUP CAMBACKUP CAM

1A

E

E

BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)

WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)

PURPLE/BLACK - RR SPEAKER (-)

YELLOW - 12V (+)

BLACK - GROUNDRED - ACCESSORY (+)

BLUE/WHITE - AMP. TURN ON (+)

PURPLE - RR SPEAKER (+)

ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)

YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED

MAESTRO RR MODULE

MAINHARNESS

RCA CABLES

WIRES FROMVEHICLE

GMS05+ T-HARNESS

FACTORY RADIO HARNESS

SPEAKER

WHITE

OR

WHITE/BLACKGRAYGRAY/BLACKGREENGREEN/BLACK

PURPLE/BLACKPURPLE

STEP 1

STEP 2

STEP 3

STEP 4

SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS

LF SPEAKER

RF SPEAKER

LR SPEAKER

RR SPEAKER

BROWN - MUTE (-)

CONNECT TOAFTERMARKET RADIO

CONNECT TO RADIO WITH LOW LEVEL OUTPUT:

CONNECT TO RADIO WITH HIGH LEVEL OUTPUT:

WIRING DIAGRAM with an Amplifier

STEERING WHEELCONTROL CABLE

Page 157: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

gmc sieRRa 2500 & 3500 without nav 2012-2014

Automotive Data Solutions Inc. © 2015 6

BACKUP CAMBACKUP CAM

CENTERCENTER

SUBSUB

B

C

A FG

C

AB

G

F

1B

E

E

STEP 1

BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)

MAINHARNESS

RCA CABLES

WIRES FROMVEHICLE

GMS05+ T-HARNESS

FACTORY RADIO HARNESS

(NOT CONNECTED)

(NOT CONNECTED)

WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)

PURPLE/BLACK - RR SPEAKER (-)

YELLOW - 12V (+)

BLACK - GROUNDRED - ACCESSORY (+)

BLUE/WHITE - AMP. TURN ON (+)

PURPLE - RR SPEAKER (+)

STEP 2

STEP 3

STEP 4

SPEAKER

MAESTRO RR MODULE

ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)

YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED

BROWN - MUTE (-)

CONNECT TOAFTERMARKET RADIO

SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS

WIRING DIAGRAM without an Amplifier

CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS

STEERING WHEELCONTROL CABLE

Page 158: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

OPTIONAL ACCESSORIESNone

PROGRAMMED FIRMWAREADS-RR(SR)-GMS05-AS

PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro GM5+ Installation Harness

INSTALL GUIDEGMC YUkON 2007-2011

Retains steeRing wheel contRols, onstaR, bluetooth and moRe!

NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.

Page 159: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

gmc Yukon 2007-2011

Automotive Data Solutions Inc. © 2015 2

WELCOME

NEED hELP?

Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.

Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.

1 866 427-2999

[email protected]

maestro.idatalink.com/supportwww.12voltdata.com/forum

TABLE OF CONTENTS

Before Installing 3

Installation Instructions 4

Wiring Diagram with an Amplifi er 5

Wiring Diagram without an Amplifi er 6

Page 160: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

gmc Yukon 2007-2011

Automotive Data Solutions Inc. © 2015 3

BEFORE INSTALLING STEP 1

DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:

METHOD 1: Look for the following logos in the vehicle. They are usually on the speaker covers or on the radio unit. If you fi nd any of the following logos Bose, Pioneer or Monsoon, you have a factory amplifi er.

METHOD 2: Look for the following sticker in the glove box. This sticker will indicate all the Regular Production Option (RPO) codes. If you fi nd any of the following codes UQA, UQS or UQG, you have a factory amplifi er.

STEP 2IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:

Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifi er and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits.

IF YOUR VEHICLE NOT IS EQUIPPED WITH A FACTORY AMPLIFIER:

Follow the installation instructions and complete the installation as shown in the wiring diagram without an amplifi er.

1

SERVICE PARTS IDENTIFICATION DO NOT REMOVE

AGI AG2 AJ1 AL0 AM7 AN3 AU0 AU3 A31 B30 B4UB58 B81 B82 CJ3 C49 C7H DF5 DK7 DL3 DT4 D07EVA E63 FF8 FF9 GT5 G80 JC4 KC4 KNP KUP K34K47 K68 LQ9 M32 NCI NEI NP3 NP5 OSG P30 QSSR4Y R9U R9Z SAF SLM TRB UC6 UK3 UQA U2K UFIUF3 UK3 VR4 VTV VXS V73 XSS X88 YD3 YD6 YE9YSS ZGC ZYI Z60 Z82 ISS ISZ 4IU 6YT 691 6927YT

BC/CC U 8555 692

143 5 FXWH2Q CKI57532GCEK19N031344764

Page 161: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

gmc Yukon 2007-2011

Automotive Data Solutions Inc. © 2015 4

INSTALLATION INSTRUCTIONS STEP 1

• Unbox the aftermarket radio and locate its main harness.

• Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.

STEP 2

• Connect the factory harness to the GM5+ T-harness.

STEP 3• Plug the aftermarket radio harnesses into the aftermarket

radio.

• Plug the Data cable to the data port of the aftermarket radio.

• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.

STEP 4• Connect all the harnesses to the Maestro RR module then

proceed to module setup.

The module is now ready to be used.

Insert the aftermarket radio in the dashboard housing and test all the functionalities.

Reassemble the dashboard carefully.

AMPLIFIER ONLYDETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS

• If your vehicle is equipped with a factory amplifi er you can connect the RCA wiring to the low level outputs of your aftermarket radio, or connect the level matching circuits to the speaker outputs of the aftermarket radio.

• If your aftermarket radio does not have low level outputs, has only a single RCA output, or the RCA output level is 2 volts or less then it is recommended to connect the level matching circuit to the speaker outputs. If the volume does not go loud enough using the RCA connections, the level matching circuits can be used.

• The internal amplifi er in some radios is not compatible with the level matching circuit. In these cases, there will be fl oor noise (hissing or buzzing at low levels) when the level matching circuit is connected. Change to the RCA connections to eliminate this noise.

TROUBLESHOOTING TIPS:

• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.

• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”

1

Page 162: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

gmc Yukon 2007-2011

Automotive Data Solutions Inc. © 2015 5

B

C

A FG

C

AB

G

F

CENTERCENTER

SUBSUB

BACKUP CAMBACKUP CAM

1A

E

E

BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)

WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)

PURPLE/BLACK - RR SPEAKER (-)

YELLOW - 12V (+)

BLACK - GROUNDRED - ACCESSORY (+)

BLUE/WHITE - AMP. TURN ON (+)

PURPLE - RR SPEAKER (+)

ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)

YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED

MAESTRO RR MODULE

MAINHARNESS

RCA CABLES

WIRES FROMVEHICLE

GMS05+ T-HARNESS

FACTORY RADIO HARNESS

SPEAKER

WHITE

OR

WHITE/BLACKGRAYGRAY/BLACKGREENGREEN/BLACK

PURPLE/BLACKPURPLE

STEP 1

STEP 2

STEP 3

STEP 4

SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS

LF SPEAKER

RF SPEAKER

LR SPEAKER

RR SPEAKER

BROWN - MUTE (-)

CONNECT TOAFTERMARKET RADIO

CONNECT TO RADIO WITH LOW LEVEL OUTPUT:

CONNECT TO RADIO WITH HIGH LEVEL OUTPUT:

WIRING DIAGRAM with an Amplifier

STEERING WHEELCONTROL CABLE

Page 163: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

gmc Yukon 2007-2011

Automotive Data Solutions Inc. © 2015 6

BACKUP CAMBACKUP CAM

CENTERCENTER

SUBSUB

B

C

A FG

C

AB

G

F

1B

E

E

STEP 1

BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)

MAINHARNESS

RCA CABLES

WIRES FROMVEHICLE

GMS05+ T-HARNESS

FACTORY RADIO HARNESS

(NOT CONNECTED)

(NOT CONNECTED)

WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)

PURPLE/BLACK - RR SPEAKER (-)

YELLOW - 12V (+)

BLACK - GROUNDRED - ACCESSORY (+)

BLUE/WHITE - AMP. TURN ON (+)

PURPLE - RR SPEAKER (+)

STEP 2

STEP 3

STEP 4

SPEAKER

MAESTRO RR MODULE

ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)

YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED

BROWN - MUTE (-)

CONNECT TOAFTERMARKET RADIO

SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS

WIRING DIAGRAM without an Amplifier

CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS

STEERING WHEELCONTROL CABLE

Page 164: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

OPTIONAL ACCESSORIESNone

PROGRAMMED FIRMWAREADS-RR(SR)-GMS05-AS

PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro GM5+ Installation Harness

INSTALL GUIDEGMC YUkON xL

2007-2011Retains steeRing wheel contRols, onstaR, bluetooth and moRe!

NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.

Page 165: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

gmc Yukon xl 2007-2011

Automotive Data Solutions Inc. © 2015 2

WELCOME

NEED hELP?

Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.

Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.

1 866 427-2999

[email protected]

maestro.idatalink.com/supportwww.12voltdata.com/forum

TABLE OF CONTENTS

Before Installing 3

Installation Instructions 4

Wiring Diagram with an Amplifi er 5

Wiring Diagram without an Amplifi er 6

Page 166: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

gmc Yukon xl 2007-2011

Automotive Data Solutions Inc. © 2015 3

BEFORE INSTALLING STEP 1

DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:

METHOD 1: Look for the following logos in the vehicle. They are usually on the speaker covers or on the radio unit. If you fi nd any of the following logos Bose, Pioneer or Monsoon, you have a factory amplifi er.

METHOD 2: Look for the following sticker in the glove box. This sticker will indicate all the Regular Production Option (RPO) codes. If you fi nd any of the following codes UQA, UQS or UQG, you have a factory amplifi er.

STEP 2IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:

Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifi er and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits.

IF YOUR VEHICLE NOT IS EQUIPPED WITH A FACTORY AMPLIFIER:

Follow the installation instructions and complete the installation as shown in the wiring diagram without an amplifi er.

1

SERVICE PARTS IDENTIFICATION DO NOT REMOVE

AGI AG2 AJ1 AL0 AM7 AN3 AU0 AU3 A31 B30 B4UB58 B81 B82 CJ3 C49 C7H DF5 DK7 DL3 DT4 D07EVA E63 FF8 FF9 GT5 G80 JC4 KC4 KNP KUP K34K47 K68 LQ9 M32 NCI NEI NP3 NP5 OSG P30 QSSR4Y R9U R9Z SAF SLM TRB UC6 UK3 UQA U2K UFIUF3 UK3 VR4 VTV VXS V73 XSS X88 YD3 YD6 YE9YSS ZGC ZYI Z60 Z82 ISS ISZ 4IU 6YT 691 6927YT

BC/CC U 8555 692

143 5 FXWH2Q CKI57532GCEK19N031344764

Page 167: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

gmc Yukon xl 2007-2011

Automotive Data Solutions Inc. © 2015 4

INSTALLATION INSTRUCTIONS STEP 1

• Unbox the aftermarket radio and locate its main harness.

• Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.

STEP 2

• Connect the factory harness to the GM5+ T-harness.

STEP 3• Plug the aftermarket radio harnesses into the aftermarket

radio.

• Plug the Data cable to the data port of the aftermarket radio.

• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.

STEP 4• Connect all the harnesses to the Maestro RR module then

proceed to module setup.

The module is now ready to be used.

Insert the aftermarket radio in the dashboard housing and test all the functionalities.

Reassemble the dashboard carefully.

AMPLIFIER ONLYDETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS

• If your vehicle is equipped with a factory amplifi er you can connect the RCA wiring to the low level outputs of your aftermarket radio, or connect the level matching circuits to the speaker outputs of the aftermarket radio.

• If your aftermarket radio does not have low level outputs, has only a single RCA output, or the RCA output level is 2 volts or less then it is recommended to connect the level matching circuit to the speaker outputs. If the volume does not go loud enough using the RCA connections, the level matching circuits can be used.

• The internal amplifi er in some radios is not compatible with the level matching circuit. In these cases, there will be fl oor noise (hissing or buzzing at low levels) when the level matching circuit is connected. Change to the RCA connections to eliminate this noise.

TROUBLESHOOTING TIPS:

• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.

• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”

1

Page 168: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

gmc Yukon xl 2007-2011

Automotive Data Solutions Inc. © 2015 5

B

C

A FG

C

AB

G

F

CENTERCENTER

SUBSUB

BACKUP CAMBACKUP CAM

1A

E

E

BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)

WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)

PURPLE/BLACK - RR SPEAKER (-)

YELLOW - 12V (+)

BLACK - GROUNDRED - ACCESSORY (+)

BLUE/WHITE - AMP. TURN ON (+)

PURPLE - RR SPEAKER (+)

ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)

YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED

MAESTRO RR MODULE

MAINHARNESS

RCA CABLES

WIRES FROMVEHICLE

GMS05+ T-HARNESS

FACTORY RADIO HARNESS

SPEAKER

WHITE

OR

WHITE/BLACKGRAYGRAY/BLACKGREENGREEN/BLACK

PURPLE/BLACKPURPLE

STEP 1

STEP 2

STEP 3

STEP 4

SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS

LF SPEAKER

RF SPEAKER

LR SPEAKER

RR SPEAKER

BROWN - MUTE (-)

CONNECT TOAFTERMARKET RADIO

CONNECT TO RADIO WITH LOW LEVEL OUTPUT:

CONNECT TO RADIO WITH HIGH LEVEL OUTPUT:

WIRING DIAGRAM with an Amplifier

STEERING WHEELCONTROL CABLE

Page 169: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

gmc Yukon xl 2007-2011

Automotive Data Solutions Inc. © 2015 6

BACKUP CAMBACKUP CAM

CENTERCENTER

SUBSUB

B

C

A FG

C

AB

G

F

1B

E

E

STEP 1

BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)

MAINHARNESS

RCA CABLES

WIRES FROMVEHICLE

GMS05+ T-HARNESS

FACTORY RADIO HARNESS

(NOT CONNECTED)

(NOT CONNECTED)

WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)

PURPLE/BLACK - RR SPEAKER (-)

YELLOW - 12V (+)

BLACK - GROUNDRED - ACCESSORY (+)

BLUE/WHITE - AMP. TURN ON (+)

PURPLE - RR SPEAKER (+)

STEP 2

STEP 3

STEP 4

SPEAKER

MAESTRO RR MODULE

ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)

YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED

BROWN - MUTE (-)

CONNECT TOAFTERMARKET RADIO

SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS

WIRING DIAGRAM without an Amplifier

CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS

STEERING WHEELCONTROL CABLE

Page 170: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

OPTIONAL ACCESSORIESNone

PROGRAMMED FIRMWAREADS-RR(SR)-GMS05-AS

PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro GM5+ Installation Harness

INSTALL GUIDEGMC YUkON xL

WIThOUT NAv 2012-2014Retains steeRing wheel contRols, onstaR, bluetooth and moRe!

NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.

Page 171: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

gmc Yukon xl without nav 2012-2014

Automotive Data Solutions Inc. © 2015 2

WELCOME

NEED hELP?

Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.

Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.

1 866 427-2999

[email protected]

maestro.idatalink.com/supportwww.12voltdata.com/forum

TABLE OF CONTENTS

Before Installing 3

Installation Instructions 4

Wiring Diagram with an Amplifi er 5

Wiring Diagram without an Amplifi er 6

Page 172: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

gmc Yukon xl without nav 2012-2014

Automotive Data Solutions Inc. © 2015 3

BEFORE INSTALLING STEP 1

DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:

METHOD 1: Look for the following logos in the vehicle. They are usually on the speaker covers or on the radio unit. If you fi nd any of the following logos Bose, Pioneer or Monsoon, you have a factory amplifi er.

METHOD 2: Look for the following sticker in the glove box. This sticker will indicate all the Regular Production Option (RPO) codes. If you fi nd any of the following codes UQA, UQS or UQG, you have a factory amplifi er.

STEP 2IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:

Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifi er and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits.

IF YOUR VEHICLE NOT IS EQUIPPED WITH A FACTORY AMPLIFIER:

Follow the installation instructions and complete the installation as shown in the wiring diagram without an amplifi er.

1

SERVICE PARTS IDENTIFICATION DO NOT REMOVE

AGI AG2 AJ1 AL0 AM7 AN3 AU0 AU3 A31 B30 B4UB58 B81 B82 CJ3 C49 C7H DF5 DK7 DL3 DT4 D07EVA E63 FF8 FF9 GT5 G80 JC4 KC4 KNP KUP K34K47 K68 LQ9 M32 NCI NEI NP3 NP5 OSG P30 QSSR4Y R9U R9Z SAF SLM TRB UC6 UK3 UQA U2K UFIUF3 UK3 VR4 VTV VXS V73 XSS X88 YD3 YD6 YE9YSS ZGC ZYI Z60 Z82 ISS ISZ 4IU 6YT 691 6927YT

BC/CC U 8555 692

143 5 FXWH2Q CKI57532GCEK19N031344764

Page 173: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

gmc Yukon xl without nav 2012-2014

Automotive Data Solutions Inc. © 2015 4

INSTALLATION INSTRUCTIONS STEP 1

• Unbox the aftermarket radio and locate its main harness.

• Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.

STEP 2

• Connect the factory harness to the GM5+ T-harness.

STEP 3• Plug the aftermarket radio harnesses into the aftermarket

radio.

• Plug the Data cable to the data port of the aftermarket radio.

• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.

STEP 4• Connect all the harnesses to the Maestro RR module then

proceed to module setup.

The module is now ready to be used.

Insert the aftermarket radio in the dashboard housing and test all the functionalities.

Reassemble the dashboard carefully.

AMPLIFIER ONLYDETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS

• If your vehicle is equipped with a factory amplifi er you can connect the RCA wiring to the low level outputs of your aftermarket radio, or connect the level matching circuits to the speaker outputs of the aftermarket radio.

• If your aftermarket radio does not have low level outputs, has only a single RCA output, or the RCA output level is 2 volts or less then it is recommended to connect the level matching circuit to the speaker outputs. If the volume does not go loud enough using the RCA connections, the level matching circuits can be used.

• The internal amplifi er in some radios is not compatible with the level matching circuit. In these cases, there will be fl oor noise (hissing or buzzing at low levels) when the level matching circuit is connected. Change to the RCA connections to eliminate this noise.

TROUBLESHOOTING TIPS:

• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.

• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”

1

Page 174: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

gmc Yukon xl without nav 2012-2014

Automotive Data Solutions Inc. © 2015 5

B

C

A FG

C

AB

G

F

CENTERCENTER

SUBSUB

BACKUP CAMBACKUP CAM

1A

E

E

BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)

WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)

PURPLE/BLACK - RR SPEAKER (-)

YELLOW - 12V (+)

BLACK - GROUNDRED - ACCESSORY (+)

BLUE/WHITE - AMP. TURN ON (+)

PURPLE - RR SPEAKER (+)

ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)

YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED

MAESTRO RR MODULE

MAINHARNESS

RCA CABLES

WIRES FROMVEHICLE

GMS05+ T-HARNESS

FACTORY RADIO HARNESS

SPEAKER

WHITE

OR

WHITE/BLACKGRAYGRAY/BLACKGREENGREEN/BLACK

PURPLE/BLACKPURPLE

STEP 1

STEP 2

STEP 3

STEP 4

SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS

LF SPEAKER

RF SPEAKER

LR SPEAKER

RR SPEAKER

BROWN - MUTE (-)

CONNECT TOAFTERMARKET RADIO

CONNECT TO RADIO WITH LOW LEVEL OUTPUT:

CONNECT TO RADIO WITH HIGH LEVEL OUTPUT:

WIRING DIAGRAM with an Amplifier

STEERING WHEELCONTROL CABLE

Page 175: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

gmc Yukon xl without nav 2012-2014

Automotive Data Solutions Inc. © 2015 6

BACKUP CAMBACKUP CAM

CENTERCENTER

SUBSUB

B

C

A FG

C

AB

G

F

1B

E

E

STEP 1

BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)

MAINHARNESS

RCA CABLES

WIRES FROMVEHICLE

GMS05+ T-HARNESS

FACTORY RADIO HARNESS

(NOT CONNECTED)

(NOT CONNECTED)

WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)

PURPLE/BLACK - RR SPEAKER (-)

YELLOW - 12V (+)

BLACK - GROUNDRED - ACCESSORY (+)

BLUE/WHITE - AMP. TURN ON (+)

PURPLE - RR SPEAKER (+)

STEP 2

STEP 3

STEP 4

SPEAKER

MAESTRO RR MODULE

ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)

YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED

BROWN - MUTE (-)

CONNECT TOAFTERMARKET RADIO

SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS

WIRING DIAGRAM without an Amplifier

CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS

STEERING WHEELCONTROL CABLE

Page 176: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

OPTIONAL ACCESSORIESNone

PROGRAMMED FIRMWAREADS-RR(SR)-GMS05-AS

PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro GM5+ Installation Harness

INSTALL GUIDEGMC YUkON

WIThOUT NAv 2012-2014Retains steeRing wheel contRols, onstaR, bluetooth and moRe!

NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.

Page 177: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

gmc Yukon without nav 2012-2014

Automotive Data Solutions Inc. © 2015 2

WELCOME

NEED hELP?

Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.

Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.

1 866 427-2999

[email protected]

maestro.idatalink.com/supportwww.12voltdata.com/forum

TABLE OF CONTENTS

Before Installing 3

Installation Instructions 4

Wiring Diagram with an Amplifi er 5

Wiring Diagram without an Amplifi er 6

Page 178: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

gmc Yukon without nav 2012-2014

Automotive Data Solutions Inc. © 2015 3

BEFORE INSTALLING STEP 1

DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:

METHOD 1: Look for the following logos in the vehicle. They are usually on the speaker covers or on the radio unit. If you fi nd any of the following logos Bose, Pioneer or Monsoon, you have a factory amplifi er.

METHOD 2: Look for the following sticker in the glove box. This sticker will indicate all the Regular Production Option (RPO) codes. If you fi nd any of the following codes UQA, UQS or UQG, you have a factory amplifi er.

STEP 2IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:

Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifi er and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits.

IF YOUR VEHICLE NOT IS EQUIPPED WITH A FACTORY AMPLIFIER:

Follow the installation instructions and complete the installation as shown in the wiring diagram without an amplifi er.

1

SERVICE PARTS IDENTIFICATION DO NOT REMOVE

AGI AG2 AJ1 AL0 AM7 AN3 AU0 AU3 A31 B30 B4UB58 B81 B82 CJ3 C49 C7H DF5 DK7 DL3 DT4 D07EVA E63 FF8 FF9 GT5 G80 JC4 KC4 KNP KUP K34K47 K68 LQ9 M32 NCI NEI NP3 NP5 OSG P30 QSSR4Y R9U R9Z SAF SLM TRB UC6 UK3 UQA U2K UFIUF3 UK3 VR4 VTV VXS V73 XSS X88 YD3 YD6 YE9YSS ZGC ZYI Z60 Z82 ISS ISZ 4IU 6YT 691 6927YT

BC/CC U 8555 692

143 5 FXWH2Q CKI57532GCEK19N031344764

Page 179: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

gmc Yukon without nav 2012-2014

Automotive Data Solutions Inc. © 2015 4

INSTALLATION INSTRUCTIONS STEP 1

• Unbox the aftermarket radio and locate its main harness.

• Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.

STEP 2

• Connect the factory harness to the GM5+ T-harness.

STEP 3• Plug the aftermarket radio harnesses into the aftermarket

radio.

• Plug the Data cable to the data port of the aftermarket radio.

• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.

STEP 4• Connect all the harnesses to the Maestro RR module then

proceed to module setup.

The module is now ready to be used.

Insert the aftermarket radio in the dashboard housing and test all the functionalities.

Reassemble the dashboard carefully.

AMPLIFIER ONLYDETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS

• If your vehicle is equipped with a factory amplifi er you can connect the RCA wiring to the low level outputs of your aftermarket radio, or connect the level matching circuits to the speaker outputs of the aftermarket radio.

• If your aftermarket radio does not have low level outputs, has only a single RCA output, or the RCA output level is 2 volts or less then it is recommended to connect the level matching circuit to the speaker outputs. If the volume does not go loud enough using the RCA connections, the level matching circuits can be used.

• The internal amplifi er in some radios is not compatible with the level matching circuit. In these cases, there will be fl oor noise (hissing or buzzing at low levels) when the level matching circuit is connected. Change to the RCA connections to eliminate this noise.

TROUBLESHOOTING TIPS:

• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.

• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”

1

Page 180: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

gmc Yukon without nav 2012-2014

Automotive Data Solutions Inc. © 2015 5

B

C

A FG

C

AB

G

F

CENTERCENTER

SUBSUB

BACKUP CAMBACKUP CAM

1A

E

E

BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)

WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)

PURPLE/BLACK - RR SPEAKER (-)

YELLOW - 12V (+)

BLACK - GROUNDRED - ACCESSORY (+)

BLUE/WHITE - AMP. TURN ON (+)

PURPLE - RR SPEAKER (+)

ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)

YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED

MAESTRO RR MODULE

MAINHARNESS

RCA CABLES

WIRES FROMVEHICLE

GMS05+ T-HARNESS

FACTORY RADIO HARNESS

SPEAKER

WHITE

OR

WHITE/BLACKGRAYGRAY/BLACKGREENGREEN/BLACK

PURPLE/BLACKPURPLE

STEP 1

STEP 2

STEP 3

STEP 4

SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS

LF SPEAKER

RF SPEAKER

LR SPEAKER

RR SPEAKER

BROWN - MUTE (-)

CONNECT TOAFTERMARKET RADIO

CONNECT TO RADIO WITH LOW LEVEL OUTPUT:

CONNECT TO RADIO WITH HIGH LEVEL OUTPUT:

WIRING DIAGRAM with an Amplifier

STEERING WHEELCONTROL CABLE

Page 181: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

gmc Yukon without nav 2012-2014

Automotive Data Solutions Inc. © 2015 6

BACKUP CAMBACKUP CAM

CENTERCENTER

SUBSUB

B

C

A FG

C

AB

G

F

1B

E

E

STEP 1

BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)

MAINHARNESS

RCA CABLES

WIRES FROMVEHICLE

GMS05+ T-HARNESS

FACTORY RADIO HARNESS

(NOT CONNECTED)

(NOT CONNECTED)

WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)

PURPLE/BLACK - RR SPEAKER (-)

YELLOW - 12V (+)

BLACK - GROUNDRED - ACCESSORY (+)

BLUE/WHITE - AMP. TURN ON (+)

PURPLE - RR SPEAKER (+)

STEP 2

STEP 3

STEP 4

SPEAKER

MAESTRO RR MODULE

ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)

YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED

BROWN - MUTE (-)

CONNECT TOAFTERMARKET RADIO

SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS

WIRING DIAGRAM without an Amplifier

CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS

STEERING WHEELCONTROL CABLE

Page 182: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

OPTIONAL ACCESSORIESNone

PROGRAMMED FIRMWAREADS-RR(SR)-GMS05-AS

PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro GM5+ Installation Harness

INSTALL GUIDEhUMMER h2 2008-2009

Retains steeRing wheel contRols, onstaR, bluetooth and moRe!

NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.

Page 183: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

hummeR h2 2008-2009

Automotive Data Solutions Inc. © 2015 2

WELCOME

NEED hELP?

Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.

Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.

1 866 427-2999

[email protected]

maestro.idatalink.com/supportwww.12voltdata.com/forum

TABLE OF CONTENTS

Before Installing 3

Installation Instructions 4

Wiring Diagram with an Amplifi er 5

Wiring Diagram without an Amplifi er 6

Page 184: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

hummeR h2 2008-2009

Automotive Data Solutions Inc. © 2015 3

BEFORE INSTALLING STEP 1

DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:

METHOD 1: Look for the following logos in the vehicle. They are usually on the speaker covers or on the radio unit. If you fi nd any of the following logos Bose, Pioneer or Monsoon, you have a factory amplifi er.

METHOD 2: Look for the following sticker in the glove box. This sticker will indicate all the Regular Production Option (RPO) codes. If you fi nd any of the following codes UQA, UQS or UQG, you have a factory amplifi er.

STEP 2IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:

Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifi er and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits.

IF YOUR VEHICLE NOT IS EQUIPPED WITH A FACTORY AMPLIFIER:

Follow the installation instructions and complete the installation as shown in the wiring diagram without an amplifi er.

1

SERVICE PARTS IDENTIFICATION DO NOT REMOVE

AGI AG2 AJ1 AL0 AM7 AN3 AU0 AU3 A31 B30 B4UB58 B81 B82 CJ3 C49 C7H DF5 DK7 DL3 DT4 D07EVA E63 FF8 FF9 GT5 G80 JC4 KC4 KNP KUP K34K47 K68 LQ9 M32 NCI NEI NP3 NP5 OSG P30 QSSR4Y R9U R9Z SAF SLM TRB UC6 UK3 UQA U2K UFIUF3 UK3 VR4 VTV VXS V73 XSS X88 YD3 YD6 YE9YSS ZGC ZYI Z60 Z82 ISS ISZ 4IU 6YT 691 6927YT

BC/CC U 8555 692

143 5 FXWH2Q CKI57532GCEK19N031344764

Page 185: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

hummeR h2 2008-2009

Automotive Data Solutions Inc. © 2015 4

INSTALLATION INSTRUCTIONS STEP 1

• Unbox the aftermarket radio and locate its main harness.

• Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.

STEP 2

• Connect the factory harness to the GM5+ T-harness.

STEP 3• Plug the aftermarket radio harnesses into the aftermarket

radio.

• Plug the Data cable to the data port of the aftermarket radio.

• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.

STEP 4• Connect all the harnesses to the Maestro RR module then

proceed to module setup.

The module is now ready to be used.

Insert the aftermarket radio in the dashboard housing and test all the functionalities.

Reassemble the dashboard carefully.

AMPLIFIER ONLYDETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS

• If your vehicle is equipped with a factory amplifi er you can connect the RCA wiring to the low level outputs of your aftermarket radio, or connect the level matching circuits to the speaker outputs of the aftermarket radio.

• If your aftermarket radio does not have low level outputs, has only a single RCA output, or the RCA output level is 2 volts or less then it is recommended to connect the level matching circuit to the speaker outputs. If the volume does not go loud enough using the RCA connections, the level matching circuits can be used.

• The internal amplifi er in some radios is not compatible with the level matching circuit. In these cases, there will be fl oor noise (hissing or buzzing at low levels) when the level matching circuit is connected. Change to the RCA connections to eliminate this noise.

TROUBLESHOOTING TIPS:

• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.

• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”

1

Page 186: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

hummeR h2 2008-2009

Automotive Data Solutions Inc. © 2015 5

B

C

A FG

C

AB

G

F

CENTERCENTER

SUBSUB

BACKUP CAMBACKUP CAM

1A

E

E

BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)

WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)

PURPLE/BLACK - RR SPEAKER (-)

YELLOW - 12V (+)

BLACK - GROUNDRED - ACCESSORY (+)

BLUE/WHITE - AMP. TURN ON (+)

PURPLE - RR SPEAKER (+)

ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)

YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED

MAESTRO RR MODULE

MAINHARNESS

RCA CABLES

WIRES FROMVEHICLE

GMS05+ T-HARNESS

FACTORY RADIO HARNESS

SPEAKER

WHITE

OR

WHITE/BLACKGRAYGRAY/BLACKGREENGREEN/BLACK

PURPLE/BLACKPURPLE

STEP 1

STEP 2

STEP 3

STEP 4

SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS

LF SPEAKER

RF SPEAKER

LR SPEAKER

RR SPEAKER

BROWN - MUTE (-)

CONNECT TOAFTERMARKET RADIO

CONNECT TO RADIO WITH LOW LEVEL OUTPUT:

CONNECT TO RADIO WITH HIGH LEVEL OUTPUT:

WIRING DIAGRAM with an Amplifier

STEERING WHEELCONTROL CABLE

Page 187: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

hummeR h2 2008-2009

Automotive Data Solutions Inc. © 2015 6

BACKUP CAMBACKUP CAM

CENTERCENTER

SUBSUB

B

C

A FG

C

AB

G

F

1B

E

E

STEP 1

BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)

MAINHARNESS

RCA CABLES

WIRES FROMVEHICLE

GMS05+ T-HARNESS

FACTORY RADIO HARNESS

(NOT CONNECTED)

(NOT CONNECTED)

WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)

PURPLE/BLACK - RR SPEAKER (-)

YELLOW - 12V (+)

BLACK - GROUNDRED - ACCESSORY (+)

BLUE/WHITE - AMP. TURN ON (+)

PURPLE - RR SPEAKER (+)

STEP 2

STEP 3

STEP 4

SPEAKER

MAESTRO RR MODULE

ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)

YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED

BROWN - MUTE (-)

CONNECT TOAFTERMARKET RADIO

SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS

WIRING DIAGRAM without an Amplifier

CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS

STEERING WHEELCONTROL CABLE

Page 188: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

OPTIONAL ACCESSORIESNone

PROGRAMMED FIRMWAREADS-RR(SR)-GMS05-AS

PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro GM5+ Installation Harness

INSTALL GUIDESATURN OUTLOOk

2007-2010Retains steeRing wheel contRols, onstaR, bluetooth and moRe!

NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.

Page 189: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

satuRn outlook 2007-2010

Automotive Data Solutions Inc. © 2015 2

WELCOME

NEED hELP?

Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.

Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.

1 866 427-2999

[email protected]

maestro.idatalink.com/supportwww.12voltdata.com/forum

TABLE OF CONTENTS

Before Installing 3

Installation Instructions 4

Wiring Diagram with an Amplifi er 5

Wiring Diagram without an Amplifi er 6

Page 190: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

satuRn outlook 2007-2010

Automotive Data Solutions Inc. © 2015 3

BEFORE INSTALLING STEP 1

DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:

METHOD 1: Look for the following logos in the vehicle. They are usually on the speaker covers or on the radio unit. If you fi nd any of the following logos Bose, Pioneer or Monsoon, you have a factory amplifi er.

METHOD 2: Look for the following sticker in the glove box. This sticker will indicate all the Regular Production Option (RPO) codes. If you fi nd any of the following codes UQA, UQS or UQG, you have a factory amplifi er.

STEP 2IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:

Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifi er and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits.

IF YOUR VEHICLE NOT IS EQUIPPED WITH A FACTORY AMPLIFIER:

Follow the installation instructions and complete the installation as shown in the wiring diagram without an amplifi er.

1

SERVICE PARTS IDENTIFICATION DO NOT REMOVE

AGI AG2 AJ1 AL0 AM7 AN3 AU0 AU3 A31 B30 B4UB58 B81 B82 CJ3 C49 C7H DF5 DK7 DL3 DT4 D07EVA E63 FF8 FF9 GT5 G80 JC4 KC4 KNP KUP K34K47 K68 LQ9 M32 NCI NEI NP3 NP5 OSG P30 QSSR4Y R9U R9Z SAF SLM TRB UC6 UK3 UQA U2K UFIUF3 UK3 VR4 VTV VXS V73 XSS X88 YD3 YD6 YE9YSS ZGC ZYI Z60 Z82 ISS ISZ 4IU 6YT 691 6927YT

BC/CC U 8555 692

143 5 FXWH2Q CKI57532GCEK19N031344764

Page 191: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

satuRn outlook 2007-2010

Automotive Data Solutions Inc. © 2015 4

INSTALLATION INSTRUCTIONS STEP 1

• Unbox the aftermarket radio and locate its main harness.

• Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.

STEP 2

• Connect the factory harness to the GM5+ T-harness.

STEP 3• Plug the aftermarket radio harnesses into the aftermarket

radio.

• Plug the Data cable to the data port of the aftermarket radio.

• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.

STEP 4• Connect all the harnesses to the Maestro RR module then

proceed to module setup.

The module is now ready to be used.

Insert the aftermarket radio in the dashboard housing and test all the functionalities.

Reassemble the dashboard carefully.

AMPLIFIER ONLYDETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS

• If your vehicle is equipped with a factory amplifi er you can connect the RCA wiring to the low level outputs of your aftermarket radio, or connect the level matching circuits to the speaker outputs of the aftermarket radio.

• If your aftermarket radio does not have low level outputs, has only a single RCA output, or the RCA output level is 2 volts or less then it is recommended to connect the level matching circuit to the speaker outputs. If the volume does not go loud enough using the RCA connections, the level matching circuits can be used.

• The internal amplifi er in some radios is not compatible with the level matching circuit. In these cases, there will be fl oor noise (hissing or buzzing at low levels) when the level matching circuit is connected. Change to the RCA connections to eliminate this noise.

TROUBLESHOOTING TIPS:

• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.

• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”

1

Page 192: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

satuRn outlook 2007-2010

Automotive Data Solutions Inc. © 2015 5

B

C

A FG

C

AB

G

F

CENTERCENTER

SUBSUB

BACKUP CAMBACKUP CAM

1A

E

E

BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)

WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)

PURPLE/BLACK - RR SPEAKER (-)

YELLOW - 12V (+)

BLACK - GROUNDRED - ACCESSORY (+)

BLUE/WHITE - AMP. TURN ON (+)

PURPLE - RR SPEAKER (+)

ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)

YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED

MAESTRO RR MODULE

MAINHARNESS

RCA CABLES

WIRES FROMVEHICLE

GMS05+ T-HARNESS

FACTORY RADIO HARNESS

SPEAKER

WHITE

OR

WHITE/BLACKGRAYGRAY/BLACKGREENGREEN/BLACK

PURPLE/BLACKPURPLE

STEP 1

STEP 2

STEP 3

STEP 4

SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS

LF SPEAKER

RF SPEAKER

LR SPEAKER

RR SPEAKER

BROWN - MUTE (-)

CONNECT TOAFTERMARKET RADIO

CONNECT TO RADIO WITH LOW LEVEL OUTPUT:

CONNECT TO RADIO WITH HIGH LEVEL OUTPUT:

WIRING DIAGRAM with an Amplifier

STEERING WHEELCONTROL CABLE

Page 193: HOW TO USE THIS INSTALL GUIDEcdncontent2.idatalink.com/corporate/Content/Manuals/RR-GMS/ADS … · 26.01.2015  · STEP 3 • Plug the aftermarket radio harnesses into the aftermarket

ADS-RR(SR)-GMS05-AS maestro.idatalink.com

satuRn outlook 2007-2010

Automotive Data Solutions Inc. © 2015 6

BACKUP CAMBACKUP CAM

CENTERCENTER

SUBSUB

B

C

A FG

C

AB

G

F

1B

E

E

STEP 1

BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)

MAINHARNESS

RCA CABLES

WIRES FROMVEHICLE

GMS05+ T-HARNESS

FACTORY RADIO HARNESS

(NOT CONNECTED)

(NOT CONNECTED)

WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)

PURPLE/BLACK - RR SPEAKER (-)

YELLOW - 12V (+)

BLACK - GROUNDRED - ACCESSORY (+)

BLUE/WHITE - AMP. TURN ON (+)

PURPLE - RR SPEAKER (+)

STEP 2

STEP 3

STEP 4

SPEAKER

MAESTRO RR MODULE

ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)

YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED

BROWN - MUTE (-)

CONNECT TOAFTERMARKET RADIO

SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS

WIRING DIAGRAM without an Amplifier

CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS

STEERING WHEELCONTROL CABLE