5/22/2018 How to Setup ZTE Router [Dynamic Configuration]

1/4

How to setup ZTE Router [Dynamic Configuration]

Login into the router with 192.168.1.1.

The User name: ZXDSL. The Password: ZXDSL.

Click Quick Setup.

5/22/2018 How to Setup ZTE Router [Dynamic Configuration]

2/4

And then Select VPI:0 VCI:35 And Click Next.

And then Select Type: PPPoE. And then Encapsulation:LLC/SNAP

And Click Next.

5/22/2018 How to Setup ZTE Router [Dynamic Configuration]

3/4

And then Select Enable NAT: Mark on it. And Click Next.

Type thePPP Username and PPP Passwordas Show above.

And Click Next.

5/22/2018 How to Setup ZTE Router [Dynamic Configuration]

4/4

And then we will leave theIP Address: 192.168.1.1 and Subnet Mask:255.255.255.0 asdefault.

And Select to Enable DHCP Server on the LAN And Click Next.

And Click Finish to finish the configuration.

http://www.tedata.net/