How to make ribbon headbands of a bow

How does the headband look if hair bows are combined with button and bead? Actually this

combination is very easy to make. Following how to make ribbon headbands will show you the

truth.

Materials you need have

Satin ribbon

Metal button

Bead

Elastic cords

Gauze

Sewing threads

Needle

Scissors

Double-sided glue

Pliers

Pin

How to make ribbon headbands?

We have taught many methods on how to make ribbon headbands. This time hair bows are used to

make the headband. Bows are common decorations, yet button and bead are also added.

Step 1: make a bow

Prepare what are needed first shown in the

first picture. Fold each end of the ribbon to

make a bow shape; up fold the right ribbon

to make a circle shape; do the same with the

left side. Fix the bow with a strand of thread

in the middle. Cut a ribbon and stick

double-sided glue at each end.

Step 2: add a button to the bow

Stick two ends of the glued ribbon to the

center. Then insert it to the fixed bow. Cross

a white ribbon; attach it to the bow and fix

them with a short white ribbon. Use pliers

to wipe out the threading place. Glue the

button on the white ribbon in the center.

Hair bows are made just by some folding using the ribbons. It is simple to follow how to make

ribbon headbands of three things together-designed for you. If you like it, don’t hesitate to learn.

Satin ribbon can be found at: http://www.lovehobbycraft.com/c-527-satin-ribbons.html

Step 3: embroider the bead and make band

Cut a piece of gauze which can wrap the bead; leave small

space out. Make a loop at one end of a pin and thread it to

the wrapped bead; cut the redundant pin. You can choose

a small piece of metal ornament to be linked with loop. Cut

a ribbon of 1cm by 2cm; make two symmetrical holes.

Thread the elastic cord of appropriate length through the

holes.

Step 4: the ending work

Pull the ribbon the end of the cord. Glue the small ribbon to

the back of the bow in the middle. Sew a small ribbon at

the pin cut end of the bead with the two sides stitched; let

the cord can pass in the middle. Thread the bead to the

cord and glue the two ends of the cord.