Upload
mike-green
View
78
Download
4
Embed Size (px)
DESCRIPTION
Learn make beaded jewelry easily with some abandoned or idle stuffs; here I have posted a unique guide to making a piece of delicate Christmas tree charm with household safety pins and Abacus Glass Beads.
Citation preview
How to Make Beaded Jewelry with Common Household Stuff
Summary: Learn make beaded jewelry easily with some abandoned or idle stuffs; here I
have posted a unique guide to making a piece of delicate Christmas tree charm with
household Pin Backs and Abacus Glass Beads.
How to make beaded jewelry; no matter
statement necklace, dazzling bracelet and
earrings or even other costume jewelry
ornaments can help get your jewelry
making experience into another new
higher level. Knowing making beaded
jewelry not only means an item consisted
of variety beads and findings, it also needs
one to devote mass spirit and creativity to
it, such as this Christmas tree charm out of
Pin Backs. Wanna to know how I produce
it?
Above all, gather together what you may need for making beaded jewelry:
6mm Abacus Glass bead
4mm Square Glass bead
8mm Bicone Glass bead
18mm pearl bead
Pin Back
Headpin
Cord Loop
Tiger tail
Side cutting
Wire-cutter Plier
Round Nose Plier
How to make beaded jewelry?
Step1: create the top-half portion of Christmas tree charm
Open the Pin Back and thread three
6mm Abacus Glass beads onto the pin,
both green and red ones can be all
right. 5~6 groups are enough!
Next, find the tops of Pin Backs and
circle them closely with a section tiger
tail wire.
Step2: embellish the bottom
While combine the bottom portion of
Pin Backs, remember to supply one 8mm
Green Bicone Glass bead between each
two of them. Once finish, you will see
the tree top.
Step3: make bottom-half portion of Christmas tree charm
The detailed processes can similarly refer
to the above.
Step4: make the trunk of Christmas tree charm
String one 4mm Square Glass bead, one
6mm Abacus Glass bead (Orange) and
one 18mm pearl bead on the pin, them
pass the pin through whole tree body.
Next, attach another 8mm Bicone Glass
bead (Orange) on the top for lucky star.
Finally, loop the excess pin part and hang
on the cord loop, so far you have done
your Christmas tree charm!
Tips: in the last step, the 18mm pearl bead is mainly used for keeping the whole Christmas
tree charm in its shape, and it can be replaced by other beads. Have you got it? For more
stunning guides on making beaded jewelry, welcome to our pandahall! Furthermore, the
necessary materials can be also provided here as well.
For more jewelry findings, please visit the page at:
http://www.pandahall.com/wholesale-Jewelry-Findings/3.html