ramé-hart instrument co.

How to Install the FOcontrol Driver

for any F1 Series System

ramé-hart instrument co.

PO Box 400

Netcong, NJ 07857-0400

USA ph 973-448-0305

fx 973-448-0315

www.ramehart.com

ramé-hart instrument co. page 2 How to Install FOcontrol Driver

1. First, locate the FOcontrol_Install file which is located in the C:\ramehart.cd folder. If the file is not there, you can locate it on

the CD which was supplied with your system.

2. Run the program by double clicking on it. If you are prompted to allow access to the program by Windows, click on Allow.

3. You will have a welcome to InstallShield Wizard for FOcontrol

screen. Click Next as shown below.

ramé-hart instrument co. page 3 How to Install FOcontrol Driver

4. Accept terms if the license agreement. Click Next as shown below.

ramé-hart instrument co. page 4 How to Install FOcontrol Driver

5. Type in your name and company name. Click Next

ramé-hart instrument co. page 5 How to Install FOcontrol Driver

6. For Setup Type Chose Complete. Click Next

ramé-hart instrument co. page 6 How to Install FOcontrol Driver

7. Click Install

ramé-hart instrument co. page 7 How to Install FOcontrol Driver

8. Click Finish

9. You should now have a FOcontrol Icon on your desktop. (Do

not click on this.)

ramé-hart instrument co. page 8 How to Install FOcontrol Driver

10. Next, plug in your FOculus camera. An icon will appear in the

lower right corner of the screen and the following screen will pop up. Chose Locate and Install Driver Software. Click Continue.

ramé-hart instrument co. page 9 How to Install FOcontrol Driver

11. The following message will appear. Click Close.

12. Click Start > Control Panel > Device Manager. If prompted to allow access to the program by Windows, click Continue

ramé-hart instrument co. page 10 How to Install FOcontrol Driver

13. Click on Start > Control Panel.

14. Click on Device Manger and “Continue” if prompt.

15. Choose NET GmbH FO124SB > right click and choose Update

Software Driver.

ramé-hart instrument co. page 11 How to Install FOcontrol Driver

16. Choose Browse my computer for Driver Software.

ramé-hart instrument co. page 12 How to Install FOcontrol Driver

17. Click Browse

ramé-hart instrument co. page 13 How to Install FOcontrol Driver

18. Scrolls down and click on Computer.

ramé-hart instrument co. page 14 How to Install FOcontrol Driver

19. Click on OS (C:)

ramé-hart instrument co. page 15 How to Install FOcontrol Driver

20. Click Program Files

ramé-hart instrument co. page 16 How to Install FOcontrol Driver

21. Scroll down and choose NET GmbH

ramé-hart instrument co. page 17 How to Install FOcontrol Driver

22. Choose Device Driver and click Ok

ramé-hart instrument co. page 18 How to Install FOcontrol Driver

23. Click Next

ramé-hart instrument co. page 19 How to Install FOcontrol Driver

24. The following message may appear. If it does, choose Install

this driver software anyway.

ramé-hart instrument co. page 20 How to Install FOcontrol Driver

25. Click Close

ramé-hart instrument co. page 21 How to Install FOcontrol Driver

26. Right click on NET GmbH1394 Digital Camera and click on

Properties.

ramé-hart instrument co. page 22 How to Install FOcontrol Driver

27. If the installation was successful, it will read “This device is

working properly” under the Device Status section of the General tab. Click OK to close.

Congratulations.