Upload
others
View
10
Download
0
Embed Size (px)
Citation preview
How to do Flash Firmware Acrowhoop v2
Prepare:
- BetaFilght app on Google chrome: Click Here
- Firmware Betaflight 3.1.0s for Acrowhoop V2 : Click Here
Let’s go:
Step 1: Open Betaflight and plug USB connect Acrowhoop with PC.
When you plug USB, at the Com Port number will appear or auto change Com number.
If PC don’t detect Acrowhoop please install driver for your PC.
Latest CP210x Driver can be downloaded from here
Lastet STM USB VCP Driver can be downloaded from here.
Step 2: Click Firmware Flasher tab to go to Flash FC interface
Step 3. Load Firmware and Flash Acrowhoop.
- First, click Load Firmware [Load], Windows appear a Windows Explorer, at this Windows
Explorer you go to folder have file Firmware Acrowhoop V2 and open file firmware.
- After click Open file, you will come back Betaflight Firmware Flasher interface and you can see
Flash Firmware isn’t hidden and click it to begin flash.
When you click Flash Firmware, interface of processing flash firmware same as below picture.
Note: While Flashing, please don’t un-plug USB.
When you see like as this picture, that mean you flash firmware succeseful.
Your firmware should now be loaded and you are ready to bind your craft and fly.
.