15
HOVERMATT MODULE Presented by: Jonna Bobeck BSN, RN, CEN

Hovermatt Module

  • Upload
    ernst

  • View
    71

  • Download
    0

Embed Size (px)

DESCRIPTION

Hovermatt Module. Presented by: Jonna Bobeck BSN, RN, CEN. Introduction. Used to assist with lateral transfers and repositioning Radiolucent and artefact free Fewer staff required for transfer and decrease in injuries Air perforations on the underside reduce friction. Indications. - PowerPoint PPT Presentation

Citation preview

Page 1: Hovermatt  Module

HOVERMATT MODULE

Presented by: Jonna Bobeck BSN, RN, CEN

Page 2: Hovermatt  Module

INTRODUCTION Used to assist with lateral transfers and

repositioning Radiolucent and artefact free Fewer staff required for transfer and

decrease in injuries Air perforations on the underside reduce

friction

Page 3: Hovermatt  Module

INDICATIONS Patients unable to assist in their own

lateral transfer Patients whose weight or girth poses a

potential health risk for the caregivers responsible for repositioning or laterally transferring said patients

Page 4: Hovermatt  Module

CONTRAINDICATIONS Patients who are experiencing thoracic,

cervical or lumbar fractures who are diagnosed as unstable, unless in conjunction with a spinal board on top of the Hovermatt mattress

Page 5: Hovermatt  Module

PRECAUTIONS Caregivers must verify that bed is securely

locked prior to transfer Additional caregivers are recommended when

moving patients over 750lbs/340kg Do not attempt to move a patient on an un-

inflated mattress Route the power cord as to not pose a tripping

hazard Avoid blocking air intakes of the air supply unit NEVER leave the patient unattended on an

inflated mattress ALWAYS use at least two people during patient

transfer

Page 6: Hovermatt  Module

MRI USE When using the Hovermatt in the MRI

environment, a 25 foot specialty hose is required!!

Page 7: Hovermatt  Module

PART IDENTIFICATION: MATTRESS

Page 8: Hovermatt  Module

PART IDENTIFICATION: AIR SUPPLY

Page 9: Hovermatt  Module

AIR SUPPLY KEYPAD FUNCTIONS

Page 10: Hovermatt  Module

INSTRUCTIONS FOR USE Patient should be horizontal Place HoverMatt underneath patient Plug air supply into outlet Insert hose Turn on air Supply Grasp handles and pull at an angle Ensure the patient is centered Press standby

Page 11: Hovermatt  Module

CLEANING Mattress:

Reusable constructed with nylon twill Between use wipe with 100:1 bleach solution May be laundered for heavy soiling

Air Supply: In between patient uses, the Air Supply can

be cleaned by wiping down using a damp cloth with soap and water or mild neutral detergent. Dry using a clean , dry cloth or disposable paper towel

DO NOT spray cleaners or liquids directly on the Air Supply

Page 12: Hovermatt  Module

PREVENTATIVE MAINTENANCE Visually inspect Make sure all handles are intact Inspect for tears or holes Remove from use if any damage is

found

Page 13: Hovermatt  Module

INFECTION CONTROL Seams are heat sealed Offers a stain and fluid proof surface May use sheet on top of mattress Employ same protocols for isolation

patient

Page 14: Hovermatt  Module

DEMONSTRATION

Page 15: Hovermatt  Module

REFERENCE Hovertech International. (2012).

Hovermatt air transfer system user manual. Bethlehem, PA: Hovertech International.

Youtube. (Performer) (2011). Hovermatt demonstration [Theater]. Available

from http://www.youtube.com/watch?v=5ASVQODzwQA