Hot Water Pressure Washers

3 1

Hot Water Pressure Washers

D e s i g n F e a t u r e s D e s i g n F e a t u r e s

3 2

Design

Magneto Power EMF!!

Patented magneto EMF burner design makes for trouble free

heat. A magneto

is simple and

eliminates 12V

electric failures.

Dependable, self-

contained and

lighter.

Top Fired Burners

Blowing the flame into the coil "Top Down" allows

for quicker, hotter, efficient output. Servicing will

never be easier as top fired burners have flame

sight glass, electrodes and fuel nozzle all on top for

easy access.

Wheel Lock

Lock your wheels for safety during operation or during transportation.

Now a standard feature on all Storm hot water units.

D e s i g n F e a t u r e s D e s i g n F e a t u r e s

3 3

D e s i g n F e a t u r e s

Hot Water Pressure WasHers

Features

Warranty

All Hot Water units carry the following warranties:

Burner 1 Year

Motors 2 Years

Coil 3 Years

Pumps – IndustrialExcluding wear items

5 Years

AccessoriesIncluding hose reels, hose, gun, wand, tips, injector, couplers, unloaders wheels

90 Days

Note: Wear items consist of:

Packing Kits, Oil Seal Kits, Valve Kits, O-Rings

and Rubber Parts, Oil

Our Frames

Powdercoated 1.25" tubing is heavy duty and comes with lifting lug.

Coil drain, burner hood and bulkhead style outlet hose coupler and

wand holder are all additional features incorporated into our durable

frame design.

G a s P o w e r e d G a s P o w e r e d

3 4

DHS253P

DHS253PdSpeck Pump, 2500 PSI, 3.0 GPM - Diesel Fired

S p e c i f i c a t i o n s

Power Honda

Horse Power - (HP / kW) 6.5 / 4.8

Engine Fuel Capacity (US Gal / L) .95 / 3.6

Diesel Fuel Capacity (US Gal / L) 4 / 15

Diesel Consumption 1.53 GPH

Pump Speck

Operating Pressure (PSI / Bar) 2500 / 172

Volume (US GPM / Litres) 3.0 / 11.4

Pressure Hose (Ft. / m) 50 / 14

Fired Diesel

BTU 205,000

Dimensions (in / cm) 38 x 30 x 38 / 96 x 76 x 96

Weight (lb. / kg) 269 / 122 net — 385 / 175 shipping

2500 PSI, 3.0 GPM - Diesel FiredHonda 6.5 HP GX Series OHV Engine�

Triplex pump with ceramic plungers �

Brass manifold with variable pressure �

Thermal relief valve �

Chemical injector with soap metering valve �

EMF (Electro Magneto Fired) burner �

Wand Holder - 2 locations �

Coil - Schedule 80, 1/2 inch O.D. �

Powder coated frame �

Wheel Lock �

Coil drain valve �

36 inch gun and wand assembly �

50 foot pressure hose with Viton QD fittings �

Nozzle orifice size - 3.5/4 �

4 Quick couple nozzles: 15° (yellow), 25° (green), 40° �(white) and 50° (black soap tip)

CSA approved �

DHS253P

Shown with optional hose reel

DHS253PH

G a s P o w e r e d G a s P o w e r e d

3 5

G a s P o w e r e d


DHS354P


Power Honda

Horse Power - (HP / kW) 13 / 9.7

Engine Fuel Capacity (US Gal / L) 1.7 / 6.5

Diesel Fuel Capacity (US Gal / L) 5.5 / 21


Pump AR




Fired Diesel

BTU 294,000



3500 PSI, 4.0 GPM - Diesel FiredHonda 13 HP GX Series OHV Engine�





EMF (Electro Magneto Fired) burner �

Wand Holder - 2 locations �



Wheel Lock �




Nozzle orifice size - 4.0 �

4 Quick couple nozzles: 15° (yellow), 25° (green), 40° �(white) and 50° (black soap tip)

CSA approved �

DHS354PdAR Pump, 3500 PSI, 4.0 GPM, Diesel Fired

DHA354P

Shown with optional hose reel

DHS354PH

G a s P o w e r e d E l e c t r i c P o w e r e d

3 6

DHG355S3500 PSI, 5.6 GPM – Diesel FiredHonda V-Twin 20HP GX Series OHV with electric start�



Belt driven pump �



120V AC burner �

1800 watt generator �

Float tank �




50 foot pressure hose with QD fittings �


4 Quick couple nozzles: �15° (yellow), 25° (green), 40° (white) and 50° (black soap tip) CSA approved

CSA approved �

Battery included �

DHG355SdGeneral Pump, 3500 PSI, 5.6 GPM - Diesel Fired


Power Honda

Horse Power - (HP / kW) 20 / 14.9

Engine Fuel Capacity (US Gal / L) 10 / 38



Pump General


Volume (US GPM / Litres) 5.6 / 21


Fired Diesel

BTU 472,000


Weight (lb. / kg) 750 / 341 net — 854 / 388 shipping Shown with custom options

G a s P o w e r e d E l e c t r i c P o w e r e d

3 7

E l e c t r i c P o w e r e d


DBG152/203Diesel / Kerosene FiredTotally enclosed fan - cooled motor with thermal overload protection�




Float tank, Hi pressure soap (adjustable) �

115V burner �

Wand holder �



Powder coated roll-cage frame, lift spot �

Wheel lock �

35 foot electrical cord with GFCI �




4 Quick couple nozzles: �15° (yellow), 25° (green), 40° (white) and 50° (black soap tip)

CSA approved �

DBG152PSdGeneral Pump, 1500 PSI, 2.0 GPM - Diesel / Kerosene Fired

DBG203PSdGeneral Pump, 2000 PSI, 3.0 GPM - Diesel / Kerosene Fired

S p e c s D B G 1 5 2 P S D B G 2 0 3 P S

Power Marathon Marathon

Horse Power - (HP / kW) 2.0 / 1.5 4.0 / 3.0

Phase — Voltage 1 — 110 1 — 230

Amps 19 18

Diesel Fuel Capacity (US Gal / L) 4 / 15 4 / 15

Diesel Consumption 1.33 GPH 1.48 GPH

Pump General General

Operating Pressure (PSI / Bar) 1500 / 103 2000 / 138

Volume (US GPM / Litres) 2.0 / 7.6 3.0 / 11.4

Pressure Hose (Ft. / m) 50 / 14 50 / 14

Fired Diesel Diesel

BTU 172,000 300,000

Dimensions (in / cm) 34 x 30 x 33 / 86 x 76 x 84 34 x 30 x 33 / 86 x 76 x 84

Weight (lb. / kg) 250/114 net — 373/170 ship 270/123 net — 393/179 ship

E l e c t r i c P o w e r e d E l e c t r i c P o w e r e d

3 8

DBG2542500 PSI - Diesel / Kerosene FiredTotally enclosed fan - cooled motor with thermal overload protection�





Float tank, High pressure soap (adjustable) �

115V burner �

Wand holder - 2 locations �



Wheel lock �


35 foot electrical cord (GFCI included) �




4 Quick couple nozzles: 15° (yellow), 25° (green), 40° (white) �and 50° (black soap tip)

CSA approved �

DBG254PSdGeneral Pump, 2500 PSI, 4.0 GPM, 6.0 HP, 1 Phase, Diesel


Power Marathon

Horse Power - (HP / kW) 6.0 / 4.5

Phase — Voltage 1 — 230

Amps 25



Pump General




Fired Diesel

BTU 294,000

Dimensions (in / cm) 49.5 x 28 x 40.5 / 112 x 89 x 104


E l e c t r i c P o w e r e d E l e c t r i c P o w e r e d

3 9

E l e c t r i c P o w e r e d


DBG3043000 PSI - Diesel / Kerosene Fired - Belt DriveTotally enclosed fan - cooled motor with thermal overload protection�





Float tank, High pressure soap (adjustable) �

115V burner �

Wand holder - 2 locations �



Wheel lock �


35 foot electrical cord (GFCI included) �





CSA approved �

DBG304PS – d Single PhaseGeneral Pump, 3000 PSI, 4.0 GPM, 1 Ph

DBG304PT – d Three PhaseGeneral Pump, 3000 PSI, 4.0 GPM, 3 Ph

S p e c s D B G 3 0 4 P S D B G 3 0 4 P T

Power Marathon Marathon

Horse Power - (HP / kW) 8.0 / 6.0 8.0 / 6.0

Phase — Voltage 1 — 230 3 — 230

Amps 36 24

Diesel Fuel Capacity (US Gal / L) 10 / 38 10 / 38

Diesel Consumption 2.1 GPH 2.1 GPH

Pump General General

Operating Pressure (PSI / Bar) 3000 / 207 3000 / 200

Volume (US GPM / Litres) 4.0 / 15.1 4.0 / 15.1

Pressure Hose (Ft. / m) 50 / 14 50 / 14

Fired Diesel Diesel

BTU 345,000 345,000

Dimensions (in / cm) 49.5x28x40.5 / 112x89x104 49.5x28x40.5 / 112x89x104

Weight (lb. / kg) 607/276 net — 737/335 ship 595/270 net — 732/333 ship

E l e c t r i c P o w e r e d H e a t e r M o d u l e

4 0

NBGP204/304Electric Powered 2000 to 3000 PSI - Natural Gas Fired

Baldor TEFC motor�


Brass manifold with variable pressure control �


Chemical injector with metering valve �

Low maintenance burner with piezo ignitor �

24V operating controls �


9 Inch draft hood �

Adjustable thermostat control �

20 foot Electrical cable �



50 foot pressure hose with QD fittings �

Nozzle orifice size : 4.0 �


CSA approved �

Options:

Auto start/stop�

NBGP204SS – d Single PhaseGeneral Pump, 2000 PSI, 4.0 GPM, 1 Ph

NBGP204ST – d Three PhaseGeneral Pump, 2000 PSI, 4.0 GPM, 3 Ph

NBGP304SS – d Single PhaseGeneral Pump, 3000 PSI, 4.0 GPM, 1 Ph

NBGP304ST – d Three PhaseGeneral Pump, 3000 PSI, 4.0 GPM, 3 Ph

S p e c s N B G P 2 0 4 S S N B G P 2 0 4 S T N B G P 3 0 4 S S N B G P 3 0 4 S T

Power Baldor Baldor Baldor Baldor

Horse Power - (HP / kW) 5.0 / 3.7 5.0 / 3.7 7.5 / 5.6 7.5 / 5.6

Phase — Voltage 1 — 230 3 — 230 1 — 230 3 — 230

Amps 23 13.4 33.7 21

Pump General General General General

Operating Pressure (PSI / Bar) 2000 / 138 2000 / 138 3000 / 207 3000 / 207

Volume (US GPM / Litres) 4.0 / 15.1 4.0 / 15.1 4.0 / 15.1 4.0 / 15.1

Pressure Hose (Ft. / m) 50 / 14 50 / 14 50 / 14 50 / 14

Fired Natural Gas Natural Gas Natural Gas Natural Gas

BTU 345,500 345,500 345,500 345,500

Dimensions (in / cm) 53 x 20 x 40 / 135 x 51 x 102 53 x 20 x 40 / 135 x 51 x 102 53 x 20 x 40 / 135 x 51 x 102 53 x 20 x 40 / 135 x 51 x 102

Weight (lb. / kg) 530 / 241 net — 655 / 298 ship 530 / 241 net — 655 / 298 ship 570 / 259 net — 695 / 316 ship 570 / 259 net — 695 / 316 ship

E l e c t r i c P o w e r e d H e a t e r M o d u l e

4 1

H e a t e r M o d u l e


D430P110Diesel Instant on demand heater�

Heats under high pressure �

Maximum 4000 PSI �

Maximum 8 GPM �


Adjustable thermostat control �

Flow controlled burner �


10" pneumatic tires with wheel brake �

35 foot electrical cord & GFCI plug �

Stainless steel coil skin �

Beckett Burner – 110V �

CSA approved �

D430P110dHeater Module - Diesel Fired


Power Beckett

Phase 1

Voltage 110

Amps 5




Max Volume (US GPM / Litres) 8.0 / 30.3

Leader Hose (Ft. / m) 25 / 7.6

Fired Diesel

BTU 428,000



S t e a m C l e a n e r s F a c t o r y O p t i o n s

4 2

EG Series

1500 to 3000 PSI - Electric PoweredAuto on/off controlled at gun�

24 volt controls �

Downstream injection �

50 foot pressure hose �

Low water shut down �

Gun & wand assembly �

Adjustable thermostat �

Hour meter �


CSA approved �

Options

Portable Cart P/N EPP3104�

EG153S d1500 PSI, 2.0 GPM


EG204Sd2000 PSI, 3.6 GPM

EG23S/S d2300 PSI, 3.1 GPM


EG207Sd2000 PSI, 7.1 GPM

S p e c s E G 1 5 2 S E G 2 3 3 S E G 2 0 4 S E G 2 3 S / S E G 3 0 4 S E G 2 0 7 S

PSI / Bar 1500 / 103 2300 / 159 2000 / 138 2300 / 159 – 110 / 8 3000 / 207 2000 / 138

US GPM / Litres 2.0 / 7.6 3.1 / 11.7 3.6 / 13.6 3.1 / 11.7 – 1.5 / 5.6 3.9 / 14.7 7.1 / 26.8

HP 2.0 / 1.5 5.0 / 3.7 5.0 / 3.7 5.0 / 3.7 7.5 / 5.6 10.0 / 7.5

Frame Stationary Stationary Stationary Stationary Stationary Stationary

Outlet Temp (F) 180 140 175 180 / 310 180 125

440V A/kW 48 / 36 51 / 36 96 / 72 96 / 72 98 / 72 105 / 72

575V A/kW 38 / 36 42 / 36 77 / 72 77 / 72 80 / 72 82 / 72

Weight (lb. / kg) 300 / 136 480 / 218 480 / 218 530 / 241 500 / 227 550 / 250

S t e a m C l e a n e r s F a c t o r y O p t i o n s

4 3

F a c t o r y O p t i o n s


Model Hose Reel Electric Start Soap Tank Kit High Pressure Soap

Auto Stop / Start

Steam Kit

DHS253P UGREELH — UGSPTANK UGSOAP — UGSTEAM

DHS354P UGREELH UGESTRT UGSPTANK UGSOAP — UGSTEAM

DHG355S — Standard UGSPTANK UGSOAP — UGSTEAM

DBG152PS UGREELH — UGSPTANK UGSOAP — UGSTEAM

DBG203PS UGREELH — UGSPTANK UGSOAP — UGSTEAM

DB254PS UGREELH — UGSPTANK UGSOAP — UGSTEAM

DBG304PS — — UGSPTANK UGSOAP — UGSTEAM

DBG304PT — — UGSPTANK UGSOAP — UGSTEAM

NBGP204SS UGREELH — UGSPTANK UGSOAP UGAST3 UGSTEAM

NBGP204ST UGREELH — UGSPTANK UGSOAP UGAST3 UGSTEAM

NBGP304SS UGREELH — UGSPTANK UGSOAP UGAST3 UGSTEAM

NBGP304ST UGREELH — UGSPTANK UGSOAP UGAST3 UGSTEAM

D430P110 — — — — — —

EG153S — — — — Standard —



EG23S/S — — — — Standard —



Factory Options

UGESTRT

UGREELH

UG965600

UGSOAP

W a r r a n t y

4 4

STORM Pressure Washers will repair or replace, free of charge,

any part or parts that are defective in material or workmanship.

Transportation on parts or equipment submitted for repair or

replacement under this warranty remains the responsibility of

the purchaser. This warranty is effective for the time periods and

subject to the conditions provided for in this policy. Warranty work

must be performed by an authorized STORM Pressure Washers

Warranty Depot. For details on warranty locations, contact STORM

Pressure Washers at 1 (800) 882-1961. STORM reserves the right to

refuse any claim do to negligence or abuse.

Customer Responsibility

Customer must complete and submit warranty

registration form online for each new machine within 90

days of purchase date.

Proper service must be performed as detailed in the

owner’s manual. NOTE: Use only STORM approved pump

oil, as indicated in the owner’s manual.

Modifications and after market parts or accessories may

void overall warranty coverage.

Repairs required as a result of collision, accident,

negligence, misuse and lack of maintenance are not

covered under warranty.

Repair work, including disassembly inspections, must be

performed by an authorized STORM Pressure Washers

Depot.

Customer must provide the means of delivering the

product to and from the STORM Pressure Washers

Warranty Depot. (Freight is not an expense covered

under warranty). For the nearest STORM Pressure Washers

Warranty Depot, please call STORM Pressure Washers toll

free at 1 (800) 882-1961.

Warranty Period

Warranty coverage commences on the date of purchase by

the end user or on the date the product has been first used for

demonstration purposes.

Parts and Accessories: 90 Days - excluding wear items

Machines: Consumer Duty 1 year - excluding wear items

Machines: Light Industrial 2 years - excluding wear items

Machines: Industrial: Motors 2 years – excluding wear items

Machines: Industrial: Pumps 5 years – excluding wear items

Disclaimer

Items not covered under warranty include normal wear & tear items

such as O-rings, V-sleeves and packings, hose outer protective

jacket, unloaders and spray nozzles.

STORM Pressure Washers shall not be liable for loss of time or use

of the product, or any other indirect, incidental or consequential

damage, inconvenience or commercial loss.

Warranty

Documents

Hot Water Pressure Washers