HOT LINE TOOLS Enertelindo (PDKB) fileEnertel - Hot Line Tools Short Catalogue Page 1

Enertel - Hot Line Tools Short Catalogue Page 1

PCT-SERIES Hook Pole PM990173 Rack Wire Cutter

PI & PM SERIES Conductor Support Pole (CSP)

Insulating foam filled tube of outsidediameter 32 mm made of reinforcedfiberglass , orange colour. Full synthetic insulating head. Hook andmechanism made in bronze and lightaluminium alloy material. Voltage range / max : PCT320S 90 KV PCT380S 150 KV

Rack Wire Cutter Pole, Insulating tube & operating rod in synthetic material. Glass Fibre reinforced, orange colour. Cutting Head, Lever adnd Rack in Metal Protected Against Corrosion. Total Length L Distance : 2.40 m

CONDUCTOR SUPPORT POLE made out of insulating orangetube foam filled used to move and hold energized conductorsduring maintenance operations Swivel ring and holding vice are protected against corrosion

(Model 1) (Model 2)

PI-5 PI-6 PI-8 PI-9 PM-9Total length L (m) 2.30 3.30 3.60 4.30 5.10(1)

Insulating length l (m) 2.40 3.00 3.50 4.00 4.50(2)

Diameter of the tube (mm) 39 63 63 63 63 Holding vice capacity (mm) 4 to 50 4 to 50 4 to 50 4 to 50 4 to 50

Approximate weight (kg) 4.3 8.2 10.4 15.1

Specification : Reference Length /mm Weight / Kg

PCT180S - PCT180E 1715 2.5 PCT200S - PCT200E 1915 2.6 PCT260S - PCT260E 2515 2.9 PCT320S - PCT320E 3115 3.6 PCT380S - PCT380E 3715 4.2

HOT LINE TOOLS (PDKB) Enertelindo

Diameter of Tube : 32 mm Diameter of the Control Rod : 10 mm Cutting Capacity : All cables cooper, aluminium Alloy, Steel Aluminium with a cross section ≤ 228 mm2 Approximative weight : 7 Kg.


AL - 3 Insulator Flexible Cover

DMC371 Makes Switch AL-35 By Pass Jumper

The DMC 371 Make Switch, incombination with shunt , is for openingand closing a loaded circuit. Maximum voltage : 33KV Switching Power :

- 3300 KVA off loaded - 200 A closing - 50A/33 KV opening - 90A/20 KV opening

BY- PASS JUMPER, used in order toopen a circuit without modifying the diagram of the Network. Charateristic :

INSULATING FLEXIBLE COVER, black colour ,made in elastomer material designed to offer personalprotection during maintenance works This cover is placed on live line hardware to secure theworking place Two version are available one of which containOpenings allows the covering of cross arms with pintype insulators Class 2 voltage : max. 20 KV Sizes 920 x 920 mm Thickness 3.5 mm Weight 3.5 Kg

Specification : Circular core Section (mm2)

Cable – multibraid Copper

50 Maximum allowed intensity (A) 250 Metal screen Without

Sysnthetic elastomer protection Colour RedUsual length (m)

4 – 8 to 10

Linear mass (kg/m) 1.3


Clamping capacityDimension : 0.6m x 0.35m x 0.30m Weight : 4.2 kg


AL - 5 Conductor Cover TN-17 Insulating Blanket 0.3 mm Thickness

TC-51 Safety Shoes “Rangers Boots” Type

The CONDUCTOR COVER is used to allow the operator to reduce the distance between his working area and the part of the conductor covered by the protective cover. It can also be used to avoid accidental contact between two items of different potential. CHARACTERISTICS Main part made from synthetic material. One or several gripping rings and locks, all made from metal protected against corrosion. Overall dimensions : 900 mm x 360 mm x 200 mm Approximate weight : 3.4 kg

TN17, Insulating blanket thickness 0.3mm used for Low Tensioninstallation Translucent polyvinyl, with Velcro type adhesive strip round the edge. Insulated by covering over the bare conductors or those with faulty, doubtful or Insufficient insulation. Several sheet may be added together. Model : 0.66 x 0.36m – weight 60gr Model : 0.90 x 0.50m – weight 115gr Model : 1.20 x 0.80m – weight 240gr


• RANGER’S BOOTS in leather (Sizes available : 38 to 47) Ranger type boots double mounted Special waterproof and oilproof leather Sewn mounting Steel toe cap and nail-protected steel sole covered with a tough dielectric material Insulated and anti-static sole with high adherence coefficient Boot with no staples , tacks or rivets Marking : size –ref.CE norm – CE marking – model - country of origin Box size : 350 x 320 x 140 mm - Average weight : 1,9 kg CE marking – Conform to norm EN 345-1 & 344-1


TG - SERIES Insulation Gloves 30 KV C–65 Safety Belt AL-32

INSULATED RUBBER LATEX GLOVES, For work on low and medium voltage cables Class 3.The Gloves confirm to standard NF EN 60903 and CEI 903-EC Marking. Supplied with instruction and sheltered from light. In their individual packing 0f 500 x 220 x 20mm

SAFETY BELT, Leather belt, reinforced with a polyamide strap.

- one piece working belt 50mm wide in chromed leatherreinforced with a polyamide strap, equipped with 2“D” rings.

- Leateher back support with 4 “D” rings for attachingthe belt for use as a double or “American” belt whenworking on live power lines.

Oil Can, secured to universal end of pole, and actuated by tie pole used for Distance greasing of gears such as line switches. Universal end-piece with fixing collars, operating ring, flexible and rigid spouts in metal Protected against corrosion. Length : Flexible spout : 200mm Rigid Spout : 150mm Capacity : 200 or 250cm3 Approximative weight : 0.35 kg


Reff Size Designation Colour Length

(cm) Thickness

(mm) Inner

CoatingOuter Finish

TG22 9 30000 Volts CLASS 3

Beige 36 ±1.5 2.7 Smooth smooth





Class AC max (V)

DC max (V)

Average Weight (g)

the pair 00 500 750 136 0 1000 1500 225 1 7500 11250 340 2 17000 22500 440 3 26500 39750 680

This back rest also has 2 rings service ropes or tools The belt allows different combinations, that is to say, C 67 models 2 and 3 Available in 3 sizes : PT = 800 to 1000mm, TM = 950 to 1250mm, GT = 1100 to 1400mm Average weight = 2.3 kg Compliance with standards C18435 and EN 358


AL-15

EBE Series Metallic Base Spliced Ladder EI-Series FibreGlass Sect.Spliced Ladder

METALLIC BASE SPLICED LADDER • Long life duration. • Reinforced end rungs. • Lightness. • No Maintenance. • Rated load : 150 Kg.

FIBREGLASS INSULATING SECTION SPLICEDLADDER, made of fiberglass composite

• Insulation : 30 kV. • Upright pultruted cross-section L 60 x

16 mm • Fiberglass composite rungs ∅ 30mm • Width : 280mm • Distance Between rungs : 300mm • Removable fiberglass cradles

LOCATING PIN with universal endpiece to line up bolt holes for easy pin or bolt insertion Made in material protected against corrosion Sizes 140 x 105 x 20 mm Weight 0.3 Kg


Refference Description Length (m) Number Of Rungs

Number Cradle +

Strap

Weight (Kg)

Bottom EB 300

(TE10B) Section 3.0m

3 10 2 9

Bottom EB 210

(TE10E) Section 2.10m

2.10 7 2 7

Refference Description Length Number Of Rungs

Number Cradle + Strap

Weight

EI120 Fiberglass

Insulating Section 1.2 m

1.20 4 1 3.6

EI210 Fiberglass


2.10 7 2 5.8

EI300 Fiberglass


3.0 10 2 7.3


TP11

Rope Block AL-8 Lift Type Saddle AL-13

Chain Thigtener/Chain Binder


Rope Block is used for adjusting conductors or changing the position of triangulation network carried out with insulating sticks on a support. Rope Block made of fiberglass reinforce polyester.

• Maximum rated load : 1300 daN • Testing load : 7800 daN (test without any perceptible

sound or visible deformation) • 2 blocks with 3 groove wheels of 120x90 mm and

2.2. kg each, fitted with a swivel hook& an adjustable locking safety catch in anti-ageing steel

• Rope block supplied with 50 m of ∅12 mm polyamide braided nylon rope

• Overall weight 9.7 kg

LIFT TYPE SADDLE, to secure the position of wire tongsduring lifting or lowering of conductors An adapter allows to convert the single type lever liftsaddle to a double type when necessary Made in light alloy material protected againstcorrosion. Working load up to 500 Kg Weight 3.9 Kg .

CHAIN TIGHTENER, is designed to secure differentequipment such as lift type saddles, pole type saddles , supports … Made in bronze and steel material protectedagainst corrosion Chain length 900 mm Maximum working load 1200 Kg Weight 1.40 Kg .


TT7415

Pole/Stick Leakage Tester AL-79

GP Series

Hydraulic Pump With Gas Engine


Pole, rod and rope insulation failure detector • For : - Rods 10 mm and 15 mm

- Poles 32, 39, 51, 64 and 77 mm - Ropes from 8 mm to 13mm

• Test position • Power supply by refillable battery • Adapter 230 V 50 Hz • Delivered in case with adapter and test tube • Dimensions (device alone) : 190 x 120 x 135 mm• Approx. weight (device alone) : 1.8 kg

POLE RULE / MEASURING ROD. - Insulated fiberglass reinforced rod. - With alternating red and white 0.10 mm bands. - Universal ends. - Length : 1.60 m in 2 x 0.80 m sections. By contact or remote control (when attached to a universal polePTUD 255), For calculating distances between components of thesame or different potential and the length between branchjunctions, while measuring the distance between. The branchanchorage point and mains connections.

HYDRAULIC PUMP, Gasoline engine driven hydraulic pump Is a heavy duty design that is rugged and portable. Durable heavy-duty four (4) H.P. Engine, long life expectancy Mannual control valve permit easy control of crimping orcutting operations. Fast hose assembly with quick disconnect pressure matchedhydraulic couplers. Engine : 4 H.P. Reservoir volume : 7.6 liters Pump Height : 493.75mm Pump Width : 325 mm Pump Length : 450mm Overall Height : 556.25 mm Weight Approximative : 35.3 kg

PRESSURE GP10 10.000 PSIGP8 8.800 PSIGP6 6.000 PSI


Y-35BH

Hydraulic Compression Head PT-Series

HCC-10


HYDRAULIC COMPRESSION HEAD, with large jaw opening,heavy duty reinforced back head tool, and quick disconnecthydraulic fitting. Easily lifted into working position using the lifting eye, easy die changing plus secure die alignment provide with the positive die lock buttons. Crimping Diamtere : 100mm2 – 300mm2

Pressure : 700 bars Force : 120 kN Weight 4.1 Kg Length : 305 mm

HYDRAULIC CUTTER, Hook head simplifies conductorcutting.The cutting blades designed to provides a clean cutcable. High strength alloy body, replaceable heavy dutyheat treated steel cutting jaw blades. Light weight hookhead design. Max Cutting diameter 500mm2

Length : 155 mm Weight : 0.5 Kg FIELD OF USE : Overhead Network WORKING METHOD : Distance method

INSULATING FLEXIBLE HYDRAULIC HOSE. Non conductive hose with stacable coupler (male/female),in metal protected against corrosion. - Easy connection to an hydraulic pump - With a maximum pressure of 700 bar Size/Length : PT29900-10 (3000mm) PT29900-15 (4500mm) PT29900-25 (7600mm)

Documents

HOT LINE TOOLS Enertelindo (PDKB) fileEnertel - Hot Line Tools Short Catalogue Page 1