Thermal insulating secret fix polyurethane panels, can be placed vertically and horizontally. In both cases, the panels are connected through hidden double-locking support ensuring continuous water tight surfaces with ideal thermal insulation and soundproofing. The strict control of raw materials, the fully automated manufacturing, the continuous research and the expertise of our staff can ensure customer’s satisfaction. The installation guide indicates all the ways to connect the panels so as to achieve the best results in sealing from the air, the rain and the fire.

horizon

horizon

description

SectionsThe Panel Horizon is available in five different textures:

stripped

standard

microrib

flat

psatha

Regardless of the type of project designed with arkhon

Horizon panels, there will always be a corresponding

panel for specific requirements, whether they are

expected to result in the aesthetics of the building or

the high thermal insulation.

In arkhon’s full technical guide there are charts that

refer to thermal insulation properties of arkhon Horizon

panels when installed by professionals. The competence

to insulation without discontinuities is based on the

specially researched and designed joint of panels.

Horizontal Positioning

The dynamic of proper joint

Joint Type

1. Water-resistant 2. U-Value factor 3. Without thermal bridges or gaps, no risk of crystallization 4. Uninterrupted insulation5. 5 different textures available.6. Special joint with multiple locks.7. Special color coatings for clean rooms and sanitary services.8. Foam to foam joint for uninterrupted insulation

1. The side without screw has double lock2. Sturdiness even in negative pressure3. Anti-vandalistic protection4. Thickness from 30mm5. Increased fire-resistance6. Screw in both steel plates and core

Labyrinth jointFrom 30mm-120mm

1

12

3

4 56

horizon

By using arkhon panels you can achieve excellent steady insulation efficiency without gaps or inconsistencies in the joints.

horizon

** Restriction by the means of transport

Thickness, t (mm): Maximum Length (mm)*:

In the production line:Off production line**:

30,40,50,60,80,100

15.000

1,800

300

2. Geometry

minimum Length (mm)*:

The panel core is consisted of rigid polyurethane foam (PUR) or polyisocyanuric (PIR) with the following characteristics:

PUrDensity . . . . . . . . . . . . . . 40-42kg/m3 . . . . . . . . . . . (ISO 845)

Adhesion . . . . . . . . . . . . . . . . 138Kpa . . . . . . .(ASTM D 1623)

. . . . . . . . . . . . . . . . . . . . . . . .125 Kpa . . . . . . . . . . . (EN 1607)

Fire reaction . . . . . . . . . . . . . . . . . PUR . . . . . . . . . . . . . . B2-B3

. . . . . . . . . . . . . . . . . . . . . . . . . . . . PIR . . . . . . .(100mm REI30)

Closed cells Percentage . . . . . . . . . . . . . . . . . . . . . . . . . . . .98%

Dimension stability . . . . . . . . . . . . 2% . . . . . . . . . . (ISO 2796)

Cut shrinkage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .+-2mm

3. PoLyUrethane Foam

PIrDensity . . . . . . . . . . . . . . . . . . 42-45kg/m3 . . . . . . . . . . . . . . (ISO 845)

Adhesion. . . . . . . . . . . . . . . . . . . . . 138Kpa . . . . . . . . . (ASTM D 1623)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .125 Kpa . . . . . . . . . . . . . .(EN 1607)

Fire reaction . . . . . . . . . . . . . . . . . . . . . . PIR . . . . . . . . . (100mm REI30)

Closed cells Percentage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98%

Dimension stability . . . . . . . . . . . . . . . . 2% . . . . . . . . . . . . . (ISO 2796)

Cut shrinkage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .+-2mm

Fire resistance 30 min

1.SteeL SheetS

• Pre-paintedsteelwithpolyesterpaint 25 microns and 7 microns backside (EN 10169-1/03)• Thicknessfrom40mmupto1.00mm(EN10142/00)• 350MpaYieldPoint 350-380 N/mm2.• Zincalume®S320GDAZ150 (55%Al-43,5%Zinc-1,5%Si) (EN 10147/00 & EN10142/00) Colorbond®XRWorganicpolyester furnace paint (EN 10169-2/99).

Statics

The following charts are created according to the EN 14509.The rates are based on sheet thicknesses 0.5/0.5mm and 0.6/0.6mm and minimum purlin thickness1.5mm

and width 40mm, to a maximum permitted deflection L/200.

horizon

Horizon 1

Horizon 2

Minimum Support width (40mm)

Minimum Support width (40mm)

3.10 2.64 2.19 1.96 1.74 1,50 3.64 4.27 4.92 6.25 7.59 2.36 1.95 1.55 1.35 1.15 2,00 2.50 3.03 3.57 4.69 5.84 1.89 1.53 1.17 1.00 0.83 2,50 1.84 2.27 2.72 3.65 4.59 1.55 1.23 0.92 0.76 0.62 3,00 1.41 1.76 2.11 2.63 3.15 1.29 1.00 0.73 0.60 0.47 3,50 1.11 1.35 1.54 1.92 2.31 1.08 0.83 0.59 0.48 0.37 4,00 0.90 1.04 1.18 1.48 1.78 0.90 0.69 0.48 0.38 0.28 4,50 0.71 0.83 0.94 1.18 1.41 0.77 0.57 0.36 0.25 - 5,00 - 0.68 0.77 0.96 1.16 0.64 0.42 0.23 - - 5,50 - - 0.65 0.81 0.97 0.47 0.29 0.13 - - 6,00 - - 0.55 0.69 0.83

Thickness (mm) 100 80 60 50 40

Load (kN/m2)

Thickness (mm) 40 50 60 80 100

Suction (kN/m2) Span (m)

3.10 2.64 2.19 1.96 1.74 1,50 2.19 2.29 2.47 2.87 2.98 2.36 1.95 1.55 1.35 1.15 2,00 1.38 1.50 1.63 1.96 2.35 1.70 1.53 1.17 1.00 0.83 2,50 0.98 1.10 1.18 1.52 1.80 1.34 1.23 0.92 0.76 0.62 3,00 0.76 0.84 0.91 1.31 1.46 1.11 1.00 0.73 0.60 0.47 3,50 0.63 0.69 0.75 1.03 1.21 0.93 0.83 0.57 0.48 0.37 4,00 0.51 0.61 0.63 0.92 1.06 0.79 0.69 0.45 0.38 0.29 4,50 0.44 0.52 0.56 0.75 0.90 0.71 0.57 0.36 0.31 0.23 5,00 0.40 0.46 0.50 0.67 0.81 0.63 0.47 0.29 0.25 0.18 5,50 0.37 0.41 0.46 0.59 0.73 0.51 0.36 0.23 0.20 0.14 6,00 0.33 0.38 0.42 0.51 0.67

Thickness (mm) 100 80 60 50 40

Load (kN/m2)

Thickness (mm) 40 50 60 80 100

Suction (kN/m2)

MulitpleSpan (m)

Acoustic efficiencyThe arkhon panel acoustic efficiency has been calculated with the use of specialized software. The results in the following chart are based in arkhon sky 80mm.

Frequency hz

125

250

500

1k

2k

4k

SRI dB

17.2

20.0

23.2

23.4

23.2

40.5

Sound reduction Index (SrI)

horizon

Color palette

In addition to the colors in stock, many other colors can be offered, upon request, in any shading, to cover specific architectural needs. Special color orders are binding according to the size of the order. Arkhon products manage to combine high thermal insulation capability with high stability and excellent protection from the weather conditions, since their production is based on high technology machinery and chemical evolution. The diversity of our panels includes roof panels, wall panels and frigo

panels with a variety in the design, depending on usage. The evolution and ensure of the unique qualities of our products is an important task for the research division of Arkhon. The project is based on the skills of experienced engineers of all disciplines (engineers, chemists, environmentalists and civil engineers) who are at your disposal for any challenges in insulation and construction. Arkhon applies environmental friendly policy using recyclable materials and polyurethanes cfc & hcfc free.

* Please ask for PVC catalogue for special colours

Water SealingThe basic compliance standard for sealing control in polyurethane panels is EN 12865. The model requires attaining a pressure seal 600 Pa under normal conditions. Laboratory tests showed that arkhon panel is watertight up to the pressure of 1070 Pa, far beyond the requirement of the system.

Air Tightness

According to EN 14509 and EN 1214, the air permeability must not exceed 10m3/Ω/m2. As in all previous tests, so in the air tightness test, arkhon panel surpass these limits.